Jonathan writes:
4th set of IIO fixes for 6.1
Single patch fixing a memory leak in an error path.
Fine to queue either for 6.2 if too late for 6.1
* tag 'iio-fixes-for-6.1d' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: fix memory leak in iio_device_register_eventset()
dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
iio: adc: aspeed: Remove the trim valid dts property.
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
iio: light: rpr0521: add missing Kconfig dependencies
iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
iio: health: afe4403: Fix oob read in afe4403_read_raw
iio: light: apds9960: fix wrong register for gesture gain
Jonathan writes:
1st set of IIO new device support, feature and cleanup for 6.2 (take2)
We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes. Now it is just used to
protect device mode transitions (typically to and from buffered capture).
Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).
Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.
New device support
* adi,ad4310
- New driver to support this very flexible measurement device including
a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
- Add support of the ADXL359 accelerometer.
* adi,ltc2983
- Support additional variants of the temperatures sensor:
LTC2984 with an EEPROM
LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
- Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
- New driver for this 3 axis accelerometer.
* maxim,max11401
- New driver to support this 24-bit 10 channel ADC.
Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
- Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
- Add support for LSM6DSV accelerometer and gyroscope. Simple additional
of chip specific data and IDs.
- Add support for LSM6DSV16X accelerometer and gyroscope. Compatible with
features currently implemented for the LSM6DSV.
* st,stm32-adc
- Add support for stm32pm13x SoCs.
core / subsystem wide:
- Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
allow for the wrapping of attributes in the code that duplicates them
for multiple buffers.
- Harden against future issues with expectation that all buffer attributes
are iio_dev_attrs by changing the code to take an array of pointers
of the correct type.
- Last transitions of drivers to local locks rather than missuses of mlock.
- Add an iio_device_claim_buffer_mode() callback to avoid a race in the
max30100 driver without directly using mlock.
- Move mlock to the opaque IIO device structure to prevent misuse.
- Add missing spi_device_id tables to support auto loading of modules.
- Update some ADI maintainers in DT bindings.
- A few more moves of bus drivers and core module sets to export
name spaces.
- Extensive use of new devm_regulator_get_enable() and friends.
- Switch a bunch of i2c drivers to probe_new() including the bmp280
which makes use of the new i2c_client_get_device_id() helper to
simplify this change.
dt-bindings:
- More use of spi-peripheral-props.yaml.
Features
* freescale,mpl115
- Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
- More sophisticated runtime power management
- Provide access to sampling frequency.
- Trivial follow up fixes.
* microchip,mcp3911
- Support control of PGA.
* st,lsm6dsx
- Add support for software triggers for cases where the IRQ lines
are not wired up.
* vishay,vcnl4000
- Add control of integration time.
Minor cleanups and fixes
* adi,ad4130
- Improve ABI documentation formatting.
- Kconfig dependency fixup.
* adi,ad5758
- Minor dt binding fix.
* adi,ad9834
- Tidy up line breaks.
* adi,ade7854
- Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
- Harden code against hardware returning wrong values.
* adi,adxl355
- Warn only if unknown device ID detected to allow for fall back
device tree compatibles on future devices.
* adi,ltc2983
- dt-bindings clarifications and general improvements.
- Ensure DMA safe buffer for bulk writes without relying on current
regmap implementation choices.
* avago,adps9960
- Fix up a disconnect between event enable attributes and what was
enabled.
* bosch,bma400
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
- Fully devm managed probe() and related tidying up.
* meas,ms5611
- Add an example of spi-max-frequency.
* meleixs,mlx90632
- Tidy up confusing error return value.
- Style improvements.
* multiplexer
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
- Minor dt binding improvements.
* rockchip,saradc
- Add ID for rv1126.
* semtech,sx9360
- Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
but is in the wild.
* st,lsm6dsx
- Factor out common code as _device_set_enable().
- Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
- Manage the min sampling time on all internal channels.
* trig,sysfs
- Improve error labels.
* tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (146 commits)
iio: pressure: bmp280: convert to i2c's .probe_new()
iio: imu: st_lsm6dsx: fix LSM6DSV sensor description
iio: adc: ad4130: depend on GPIOLIB
staging: iio: meter: replace ternary operator by if condition
iio: light: apds9960: Fix iio_event_spec structures
dt-bindings: iio: imu: Add inv_icm42600 documentation
iio: imu: inv_icm42600: Add support for icm42631
dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126
dt-bindings: iio: dac: adi,ad5758: Drop 'contains' from 'adi,dc-dc-mode'
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x
iio: imu: st_lsm6dsx: add support to LSM6DSV16X
iio: proximity: sx9360: Add a new ACPI hardware ID
iio: temperature: mlx90632: Add missing static marking on devm_pm_ops
iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable()
iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: use generic node name in example
dt-bindings: iio: temperature: ltc2983: describe broken mux delay property
dt-bindings: iio: temperature: ltc2983: refine descriptions
dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
...
The regulator enables were after the check on the chip variant, which was
very unlikely to return a correct value when not powered.
Presumably all the device anyone is testing on have a regulator that
is already powered up when this code runs for reasons beyond the scope
of this driver. Move the read call down a few lines.
Fixes: 3cf7ded15e ("iio: accel: bma400: basic regulator support")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Robertson <dan@dlrobertson.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221002144133.3771029-1-jic23@kernel.org
Discussion of the series:
https://lore.kernel.org/all/20220405135758.774016-1-catalin.marinas@arm.com/
mm, arm64: Reduce ARCH_KMALLOC_MINALIGN brought to my attention that
our current IIO usage of L1CACHE_ALIGN is insufficient as their are Arm
platforms out their with non coherent DMA and larger cache lines at
at higher levels of their cache hierarchy.
Rename the define to make it's purpose more explicit. It will be used
much more widely going forwards (to replace incorrect ____cacheline_aligned
markings.
Note this patch will greatly reduce the padding on some architectures
that have smaller requirements for DMA safe buffers.
The history of changing values of ARCH_KMALLOC_MINALIGN via
ARCH_DMA_MINALIGN on arm64 is rather complex. I'm not tagging this
as fixing a particular patch from that route as it's not clear what to tag.
Most recently a change to bring them back inline was reverted because
of some Qualcomm Kryo cores with an L2 cache with 128-byte lines
sitting above the point of coherency.
c1132702c7 Revert "arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)"
That reverts:
65688d2a05 arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES) which
refers to the change originally being motivated by Thunder x1 performance
rather than correctness.
Fixes: 6f7c8ee585 ("staging:iio: Add ability to allocate private data space to iio_allocate_device")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-2-jic23@kernel.org
This is a conversion to device-managed by using devm_iio_device_register()
inside probe function. Previously the bma400 was not put into power down
mode in some error paths in probe where it now is, but that should cause
no harm.
The dev_set_drvdata() call, bma400_remove() function and hooks in the I2C
and SPI driver struct is removed as devm_iio_device_register() function is
used to automatically unregister on driver detach.
Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220505133021.22362-4-jagathjog1996@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
I = devm_iio_device_alloc(P, SP);
...
- I->dev.parent = P;
It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'
But this is is only done in case where the block is left empty.
The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.
However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This puts an upper bound on "val2" but it also needs to have a lower
bound (BMA400_SCALE_MIN).
Fixes: 465c811f1f ("iio: accel: Add driver for the BMA400")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a IIO driver for the Bosch BMA400 3-axes ultra-low power accelerometer.
The driver supports reading from the acceleration and temperature
registers. The driver also supports reading and configuring the output data
rate, oversampling ratio, and scale.
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
