Gen P7 adapters needs to share a toggle bits information received
in kernel driver with the user space. User space needs this
info during the request notify call back to arm the CQ.
User space application can get this page using the
UAPI routines. Library will mmap this page and get the
toggle bits to be used in the next ARM Doorbell.
Uses a hash list to map the CQ structure from the CQ ID.
CQ structure is retrieved from the hash list while the
library calls the UAPI routine to get the toggle page
mapping. Currently the full page is mapped per CQ. This
can be optimized to enable multiple CQs from the same
application share the same page and different offsets
in the page.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1702535484-26844-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Pull rdma updates from Jason Gunthorpe:
"Many small changes across the subystem, some highlights:
- Usual driver cleanups in qedr, siw, erdma, hfi1, mlx4/5, irdma,
mthca, hns, and bnxt_re
- siw now works over tunnel and other netdevs with a MAC address by
removing assumptions about a MAC/GID from the connection manager
- "Doorbell Pacing" for bnxt_re - this is a best effort scheme to
allow userspace to slow down the doorbell rings if the HW gets full
- irdma egress VLAN priority, better QP/WQ sizing
- rxe bug fixes in queue draining and srq resizing
- Support more ethernet speed options in the core layer
- DMABUF support for bnxt_re
- Multi-stage MTT support for erdma to allow much bigger MR
registrations
- A irdma fix with a CVE that came in too late to go to -rc, missing
bounds checking for 0 length MRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (87 commits)
IB/hfi1: Reduce printing of errors during driver shut down
RDMA/hfi1: Move user SDMA system memory pinning code to its own file
RDMA/hfi1: Use list_for_each_entry() helper
RDMA/mlx5: Fix trailing */ formatting in block comment
RDMA/rxe: Fix redundant break statement in switch-case.
RDMA/efa: Fix wrong resources deallocation order
RDMA/siw: Call llist_reverse_order in siw_run_sq
RDMA/siw: Correct wrong debug message
RDMA/siw: Balance the reference of cep->kref in the error path
Revert "IB/isert: Fix incorrect release of isert connection"
RDMA/bnxt_re: Fix kernel doc errors
RDMA/irdma: Prevent zero-length STAG registration
RDMA/erdma: Implement hierarchical MTT
RDMA/erdma: Refactor the storage structure of MTT entries
RDMA/erdma: Renaming variable names and field names of struct erdma_mem
RDMA/hns: Support hns HW stats
RDMA/hns: Dump whole QP/CQ/MR resource in raw
RDMA/irdma: Add missing kernel-doc in irdma_setup_umode_qp()
RDMA/mlx4: Copy union directly
RDMA/irdma: Drop unused kernel push code
...
HW may generate completions that indicates QP is destroyed.
Driver should not be scheduling any more completion handlers
for this QP, after the QP is destroyed. Since CQs are active
during the QP destroy, driver may still schedule completion
handlers. This can cause a race where the destroy_cq and poll_cq
running simultaneously.
Snippet of kernel panic while doing bnxt_re driver load unload in loop.
This indicates a poll after the CQ is freed.
[77786.481636] Call Trace:
[77786.481640] <TASK>
[77786.481644] bnxt_re_poll_cq+0x14a/0x620 [bnxt_re]
[77786.481658] ? kvm_clock_read+0x14/0x30
[77786.481693] __ib_process_cq+0x57/0x190 [ib_core]
[77786.481728] ib_cq_poll_work+0x26/0x80 [ib_core]
[77786.481761] process_one_work+0x1e5/0x3f0
[77786.481768] worker_thread+0x50/0x3a0
[77786.481785] ? __pfx_worker_thread+0x10/0x10
[77786.481790] kthread+0xe2/0x110
[77786.481794] ? __pfx_kthread+0x10/0x10
[77786.481797] ret_from_fork+0x2c/0x50
To avoid this, complete all completion handlers before returning the
destroy QP. If free_cq is called soon after destroy_qp, IB stack
will cancel the CQ work before invoking the destroy_cq verb and
this will prevent any race mentioned.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce driver specific uapi functionalites. Added a alloc_page
functionality for user library to allocate specific pages. Currently added
support for allocating write combine pages for push functinality. This
interface shall be extended for other page allocations.
Allocate a WC page using the uapi hook for enabling the low latency push
in Gen P5 adapters for small packets. This is supported only for the user
space QPs.
Link: https://lore.kernel.org/r/1686679943-17117-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
After commit 6d758147c7 ("RDMA/bnxt_re: Use auxiliary driver interface")
the active_{speed, width} attributes are reported incorrectly, This is
happening because ib_get_eth_speed() is called only once from
bnxt_re_ib_init() - Fix this issue by calling ib_get_eth_speed() from
bnxt_re_query_port().
Fixes: 6d758147c7 ("RDMA/bnxt_re: Use auxiliary driver interface")
Link: https://lore.kernel.org/r/20230529153525.87254-1-kheib@redhat.com
Signed-off-by: Kamal Heib <kheib@redhat.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add resize_cq verb support for user space CQs. Resize operation for
kernel CQs are not supported now.
Driver should free the current CQ only after user library polls
for all the completions and switch to new CQ. So after the resize_cq
is returned from the driver, user library polls for existing completions
and store it as temporary data. Once library reaps all completions in the
current CQ, it invokes the ibv_cmd_poll_cq to inform the driver about
the resize_cq completion. Adding a check for user CQs in driver's
poll_cq and complete the resize operation for user CQs.
Updating uverbs_cmd_mask with poll_cq to support this.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1678868215-23626-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.
This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.
Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.
Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull rdma fixes from Jason Gunthorpe:
"I don't usually send a second PR in the merge window, but the fix to
mlx5 is significant enough that it should start going through the
process ASAP. Along with it comes some of the usual -rc stuff that
would normally wait for a -rc2 or so.
Summary:
Important error case regression fixes in mlx5:
- Wrong size used when computing the error path smaller allocation
request leads to corruption
- Confusing but ultimately harmless alignment mis-calculation
Static checker warning fixes:
- NULL pointer subtraction in qib
- kcalloc in bnxt_re
- Missing static on global variable in hfi1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/hfi1: make hist static
RDMA/bnxt_re: Prefer kcalloc over open coded arithmetic
IB/qib: Fix null pointer subtraction compiler warning
RDMA/mlx5: Fix xlt_chunk_align calculation
RDMA/mlx5: Fix number of allocated XLT entries
As noted in the "Deprecated Interfaces, Language Features, Attributes, and
Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead to
values wrapping around and a smaller allocation being made than the caller
was expecting. Using those allocations could lead to linear overflows of
heap memory and other misbehaviors.
In this case this is not actually dynamic sizes: both sides of the
multiplication are constant values. However it is best to refactor this
anyway, just to keep the open-coded math idiom out of code.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
Also, remove the unnecessary initialization of the sqp_tbl variable since
it is set a few lines later.
[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://lore.kernel.org/r/20210905081812.17113-1-len.baker@gmx.com
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, no major series stands out. The HNS and
rxe drivers saw the most activity this cycle, with rxe being broken
for a good chunk of time. The significant deleted line count is due to
a SPDX cleanup series.
Summary:
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs
core code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (90 commits)
RDMA/mlx5: Relax DCS QP creation checks
RDMA/hns: Delete unnecessary blank lines.
RDMA/hns: Encapsulate the qp db as a function
RDMA/hns: Adjust the order in which irq are requested and enabled
RDMA/hns: Remove RST2RST error prints for hw v1
RDMA/hns: Remove dqpn filling when modify qp from Init to Init
RDMA/hns: Fix QP's resp incomplete assignment
RDMA/hns: Fix query destination qpn
RDMA/hfi1: Convert to SPDX identifier
IB/rdmavt: Convert to SPDX identifier
RDMA/hns: Bugfix for incorrect association between dip_idx and dgid
RDMA/hns: Bugfix for the missing assignment for dip_idx
RDMA/hns: Bugfix for data type of dip_idx
RDMA/hns: Fix incorrect lsn field
RDMA/irdma: Remove the repeated declaration
RDMA/core/sa_query: Retry SA queries
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
RDMA/hns: Delete unused hns bitmap interface
...
The bit field rsvd1 in resp is not being initialized and garbage data is
being copied from the stack back to userspace via the ib_copy_to_udata
call. Fix this by setting the entire struct resp to zero; this will ensure
that further new bit fields in the future will be zero'd too.
Link: https://lore.kernel.org/r/20210623182437.163801-1-colin.king@canonical.com
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 879740517d ("RDMA/bnxt_re: Update ABI to pass wqe-mode to user space")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
[jgg: remove extra zeroing]
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The result of container_of() operations is never NULL unless the first
element of the embedding structure is extracted. This is either not the
case here, or the pointer passed to container_of() is known to be not
NULL. The NULL checks are therefore unnecessary and misleading.
Remove them.
The channges in this patch were made automatically with the following
Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Link: https://lore.kernel.org/r/20210514153606.1377119-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
