Currently, led pattern trigger uses timer_list to schedule brightness
changing. As we know from timer_list API [1], it's not accurate to
milliseconds and depends on HZ granularity.
Example:
"0 10 0 0 50 10 50 0 100 10 100 0 150 10 150 0 200 10 200 0 250 10 250 0",
we expect it to be 60ms long, but it can actually be up to ~120ms
(add ~10ms for each pattern when HZ == 100).
But sometimes, userspace needs time accurate led patterns to make sure
that pattern will be executed during expected time slot.
To achieve this goal the patch introduces optional hrtimer usage for
led trigger pattern, because hrtimer is microseconds accurate timer.
[1]: kernel/time/timer.c#L104
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Link: https://lore.kernel.org/r/20240416201847.357099-1-mmkurbanov@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
V4L2 will disable strobe mode of the LED device when enable torch mode,
but this logic will conflict with the "priv->fled_torch_used"
in "mt6360_strobe_set()". So after enabling torch mode of the first
LED, the second LED will not be able to enable torch mode correctly.
Therefore, at the beginning of "mt6360_strobe_set()", check whether the
state of the upcoming change and the current LED device state are the
same, so as to avoid the above problem.
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Link: https://lore.kernel.org/r/28FE6F1712799128000.chiaen_wu@richtek.com
Signed-off-by: Lee Jones <lee@kernel.org>
Building with W=1 shows a warning about an unused dmi_system_id table:
drivers/leds/leds-apu.c:85:35: error: 'apu_led_dmi_table' defined but not used [-Werror=unused-const-variable=]
85 | static const struct dmi_system_id apu_led_dmi_table[] __initconst = {
Since the current version doesn't even do anything about the different
implementations but only checks the type of system, just drop the
custom lookup logic and call dmi_check_system() using the table itself.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-16-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses mutex which was destroyed already
in module's remove() so use devm API instead.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-9-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses mutex which was destroyed already
in module's remove() so use devm API instead.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-8-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-7-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-6-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Also drop explicit turning LEDs off from remove() due to they will be off
anyway by led_classdev_unregister().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-5-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-4-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240411161032.609544-3-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver is the only one calling ledtrig_audio_set(), therefore
the LED audio trigger isn't usable standalone. So it makes sense
to fully integrate LED audio triger handling here.
The module aliases ensure that the driver is auto-loaded (if built
as module) if a LED device has one of the two audio triggers as
default trigger.
In addition disable building the old audio mute LED trigger.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/107634e6-d9ad-4a9f-881d-1eb72ea1a5a7@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
If a simple trigger is assigned to a LED, then the LED may be off until
the next led_trigger_event() call. This may be an issue for simple
triggers with rare led_trigger_event() calls, e.g. power supply
charging indicators (drivers/power/supply/power_supply_leds.c).
Therefore persist the brightness value of the last led_trigger_event()
call and use this value if the trigger is assigned to a LED.
In addition add a getter for the trigger brightness value.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/b1358b25-3f30-458d-8240-5705ae007a8a@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
Pull LED updates from Lee Jones:
"Core Framework:
- Introduce ExpressWire library
New Drivers:
- Add support for ON Semiconductor NCP5623 RGB LED Driver
New Device Support:
- Add support for PM660L to Qualcomm's LPG driver
New Functionality:
- Dynamically load modules required for the default-trigger
- Add some support for suspend and resume
- Allow LEDs to remain lit during suspend
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Fix include lists; alphabetise, remove unused, explicitly add used
- Add new led_match_default_trigger to avoid duplication
- Add module alias' to aid auto-loading
- Default to hw_control if no others are specified
- De-bloat the supported link speed attribute lists
- Remove superfluous code and simplify overall
- Constify some variables
Bug Fixes:
- Prevent kernel panic when renaming the net interface
- Fix Kconfig related build errors
- Ensure mutexes are unlocked prior to destroying them
- Provide clean-up between state changes to avoid invalid state
- Fix some broken kernel-doc headers"
* tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
leds: ncp5623: Add MS suffix to time defines
leds: Add NCP5623 multi-led driver
dt-bindings: leds: Add NCP5623 multi-LED Controller
leds: mlxreg: Drop an excess struct mlxreg_led_data member
leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name
leds: lm3601x: Fix struct lm3601_led kernel-doc warnings
leds: Fix ifdef check for gpio_led_register_device()
dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
leds: sgm3140: Add missing timer cleanup and flash gpio control
leds: expresswire: Don't depend on NEW_LEDS
Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
leds: aw2013: Unlock mutex before destroying it
leds: qcom-lpg: Add QCOM_PBS dependency
leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend
leds: trigger: netdev: Fix kernel panic on interface rename trig notify
leds: qcom-lpg: Add PM660L configuration and compatible
leds: spi-byte: Use devm_led_classdev_register_ext()
leds: pca963x: Add support for suspend and resume
...
NCP5623 is DC-DC multi-LEDs driver which has three PWMs that can be
programmed up to 32 steps giving 32768 colors hue.
NCP5623 driver supports gradual dimming upward/downward with programmable
delays. Also, the driver supports driving a single LED or multi-LED
like RGB.
Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
Link: https://lore.kernel.org/r/20240305042049.1533279-2-alkuor@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add a short struct description and remove one extraneous struct field
description to quieten these warnings:
leds-lm3601x.c:73: warning: missing initial short description on line:
* struct lm3601x_led -
leds-lm3601x.c💯 warning: Excess struct member 'led_name' description in 'lm3601x_led'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20240229071931.7870-2-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
Enabling strobe and then setting brightness to 0 causes the driver to enter
invalid state after strobe end timer fires. We should cancel strobe mode
resources when changing brightness (aka torch mode).
Fixes: cef8ec8cbd ("leds: add sgm3140 driver")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20240217191133.1757553-1-megi@xff.cz
Signed-off-by: Lee Jones <lee@kernel.org>
The lpg driver fails to link now when the pbs driver is in a loadable module:
x86_64-linux-ld: drivers/leds/rgb/leds-qcom-lpg.o: in function `lpg_brightness_set':
leds-qcom-lpg.c:(.text+0xe7f): undefined reference to `qcom_pbs_trigger_event'
x86_64-linux-ld: drivers/leds/rgb/leds-qcom-lpg.o: in function `lpg_probe':
leds-qcom-lpg.c:(.text+0x16a5): undefined reference to `get_pbs_client_device'
Add a dependency to avoid the broken configuration. Apparently there is still
a use for lpg with pbs disabled entirely for certain chips, so allow both
but not LEDS_QCOM_LPG=y with QCOM_PBS=m.
Fixes: 214110175679 ("leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20240212111526.829122-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
If none of the managed LEDs enable LED_CORE_SUSPENDRESUME, then we
shouldn't need to set it here. This makes it possible to use multicolor
groups with GPIO LEDs that enable retain-state-suspended in the device
tree.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Link: https://lore.kernel.org/r/20240206185400.596979-1-aren@peacevolution.org
[Lee: Changed the comment to respect proper grammar]
Signed-off-by: Lee Jones <lee@kernel.org>
Commit d5e01266e7 ("leds: trigger: netdev: add additional specific link
speed mode") in the various changes, reworked the way to set the LINKUP
mode in commit cee4bd16c3 ("leds: trigger: netdev: Recheck
NETDEV_LED_MODE_LINKUP on dev rename") and moved it to a generic function.
This changed the logic where, in the previous implementation the dev
from the trigger event was used to check if the carrier was ok, but in
the new implementation with the generic function, the dev in
trigger_data is used instead.
This is problematic and cause a possible kernel panic due to the fact
that the dev in the trigger_data still reference the old one as the
new one (passed from the trigger event) still has to be hold and saved
in the trigger_data struct (done in the NETDEV_REGISTER case).
On calling of get_device_state(), an invalid net_dev is used and this
cause a kernel panic.
To handle this correctly, move the call to get_device_state() after the
new net_dev is correctly set in trigger_data (in the NETDEV_REGISTER
case) and correctly parse the new dev.
Fixes: d5e01266e7 ("leds: trigger: netdev: add additional specific link speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240203235413.1146-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Commit 682e98564ffb ("leds: trigger: panic: Simplify
led_trigger_set_panic") removed the last external user of variable
trigger_list. So stop exporting it. If in future a need should arise
again to access this variable, I think we better add some accessor
instead of exporting the variable directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/ca185fb1-3a66-46b9-920e-bfecbe39c6bf@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Along the same lines as making devm_led_classdev_register() declared
extern unconditional, do the same thing for the two sub-classes
that have similar stubs.
The users of these interfaces go to great lengths to allow building
with both the generic leds API and the extended version, but realistically
there is not much use in this, so just simplify it to always rely
on it and remove the confusing fallback logic.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240109090715.982332-2-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
With the addition of more link speed mode to the netdev trigger, it was
pointed out that there may be a problem with bloating the attribute list
with modes that won't ever be supported by the trigger as the attached
device name doesn't support them.
To clear and address this problem, change the logic where these
additional trigger modes are listed.
Since the netdev trigger REQUIRE a device name to be set, attach to the
device name change function additional logic to parse the supported link
speed modes using ethtool APIs and show only the supported link speed
modes attribute.
Link speed attribute are refreshed on device_name set and on
NETDEV_CHANGE events.
This only apply to the link speed modes and every other mode is still
provided by default.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240111160501.1774-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
