The "pctldev" struct is allocated in devm_pinctrl_register_and_init().
It's a devm_ managed pointer that is freed by devm_pinctrl_dev_release(),
so freeing it in pinctrl_enable() will lead to a double free.
The devm_pinctrl_dev_release() function frees the pindescs and destroys
the mutex as well.
Fixes: 6118714275 ("pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <578fbe56-44e9-487c-ae95-29b695650f7c@moroto.mountain>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull pin control updates from Linus Walleij:
"No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander. I found this
living out-of-tree in OpenWrt as an upstream attempt had stalled on
the finishing line, so I picked it up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of tree
for the ST STA chips, and now the IP was re-used in a MIPS
automotive SoC called MobilEyeq5, so it has been split in pin
control and GPIO drivers so the latter can be reused by MobilEyeq5.
(Along with a long list of cleanups)
- A lot of overall cleanup and tidying up"
* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
dt-bindings: pinctrl: qcom: update compatible name for match with driver
pinctrl: aw9523: Make the driver tristate
pinctrl: nomadik: fix dereference of error pointer
gpio: nomadik: Back out some managed resources
pinctrl: aw9523: Add proper terminator
pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
gpio: nomadik: Finish conversion to use firmware node APIs
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
pinctrl: da9062: Add OF table
dt-bindings: pinctrl: at91: add sam9x7
pinctrl: ocelot: remove redundant assignment to variable ret
gpio: nomadik: grab optional reset control and deassert it at probe
gpio: nomadik: support mobileye,eyeq5-gpio
gpio: nomadik: handle variadic GPIO count
gpio: nomadik: support shared GPIO IRQs
...
Pull pin control updates from Linus Walleij:
"For this kernel cycle I managed an immutable branch for the PEF2256
WAN framer that has some pin control portions. It already landed in
your tree through the net pull request but here it is mentioned again.
The most interesting is perhaps the Samsung Exynos subdrivers for the
Tensor SoC used in Google Pixel 6 and the ExynosAuto subdriver for
automotive. Along with the earlier merged Tesla FSD subdriver it shows
some of the versatile uses of the Samsung Exynos silicon. It is also
used in the latest version of Axis Communications ARTPEC chips so it
is a very widely deployed SoC family.
We also have the Intel Meteor Lake SoC which I think is for laptops.
It's a pretty interesting chip with Xe graphics and integrated PCH.
Core changes:
- A new PINCTRL_GROUP_DESC() infrastructure macro is added and used
in different drivers, generic group description struct group_desc
is now used all over the place.
New drivers:
- New driver for the Texas Instruments TPS6494 Power Management IC.
- New driver for the Lantic PEF2256 framer pin multiplexer. This IC
has some pins that can be reconfigured in different ways. The
actual driver comes on an immutable branch with the net WAN parts,
the IC is some latest-and-greatest serial line funnel for e.g.
wireless access points.
- New subdriver for the Samsung Exynos Auto V920 pin controller, used
for automotive applications.
- New subdriver for the Samsung "GS101" SoC pin controller, this is
the Google "Tensor" SoC used in the Google Pixel 6.
- New subdriver for the Intel Meteor Point SoC pin controller.
- New subdriver for the Qualcomm SM8650 top level (TLMM) and LPASS
pin controllers.
- New subdriver for the Qualcomm X1E80100 top level (TLMM) pin
controller.
- New subdriver for the Qualcomm SM4450 top level (TLMM) pin
controller.
- The "single" pin controller now supports the Texas Instruments
J7200 SoC.
Improvements:
- Intel has created a new (Intel-)generic pin controller driver that
is now used by all contemporary Intel platforms.
- Intel is now also making use of some cleanup helpers.
- Enble 910 Ohm bias in the Intel Tangier driver.
- The Samsung driver now suppors irq_set_affinity() in it's IRQ chip
giving support for non wake up external gpio interrupts"
* tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits)
pinctrl: samsung: constify iomem pointers
pinctrl: cy8c95x0: Cache muxed registers
dt-bindings: pinctrl: xilinx: Rename *gpio to *gpio-grp
pinctrl: qcom: lpass-lpi: remove duplicated include
dt-bindings: pinctrl: qcom: drop common properties and allow wakeup-parent
dt-bindings: pinctrl: qcom: drop common properties
dt-bindings: pinctrl: qcom,ipq5018-tlmm: use common TLMM bindings
dt-bindings: pinctrl: qcom,x1e80100-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8650-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8550-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sdx75-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sa8775p-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,qdu1000-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom: create common LPASS LPI schema
pinctrl: qcom: sm4450: dd SM4450 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
dt-bindings: pinctrl: qcom,pmic-mpp: clean up example
pinctrl: intel: Add Intel Meteor Point pin controller and GPIO support
pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins
pinctrl: renesas: rzg2l: Add output enable support
...
When in the list_for_each_entry iteration, reload of p->state->settings
with a local setting from old_state will turn the list iteration into an
infinite loop.
The typical symptom when the issue happens, will be a printk message like:
"not freeing pin xx (xxx) as part of deactivating group xxx - it is
already used for some other setting".
This is a compiler-dependent problem, one instance occurred using Clang
version 10.0 on the arm64 architecture with linux version 4.19.
Fixes: 6e5e959dde ("pinctrl: API changes to support multiple states per device")
Signed-off-by: Maria Yu <quic_aiquny@quicinc.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231115102824.23727-1-quic_aiquny@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_set_config() is no longer used, let's drop the
'_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_direction_output() is no longer used, let's drop
the '_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_direction_input() is no longer used, let's drop the
'_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_free()() is no longer used, let's drop the '_new'
suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_request() is no longer used, let's drop the '_new'
suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_can_use_line() is no longer used, let's drop the
'_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Currently the pinctrl GPIO helpers all take a number from the global
GPIO numberspace - of which we're trying to get rid of as argument.
These helpers are almost universally called from GPIOLIB driver
callbacks which take a pointer to the backing gpio_chip and the
controller-relative offset as arguments.
Let's provide improved variants of these functions that match the
GPIOLIB signatures as the first step in removing the older flavor.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
intel-pinctrl for v6.7-1
* Merge "Drop runtime PM support for Baytrail and Lynxpoint pinctrl" (Raag)
* Small improvements here and there in the Intel pin control drivers (Raag)
* Switch to RAII for locking in the Intel core and Cherry View drivers
* Enable non-ACPI enumeration in the Intel Denverton driver
* Use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS() in a couple of drivers
* Introduce array_size.h and use in in the Intel pin control drivers
The following is an automated git shortlog grouped by driver:
baytrail:
- Replace kernel.h by what is actually being used
- drop runtime PM support
- fix debounce disable case
broxton:
- Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
cherryview:
- reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
- Convert to platform remove callback returning void
- Simplify code with cleanup helpers
- Avoid duplicated I/O
- Replace kernel.h by what is actually being used
denverton:
- Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
- Enable platform device in the absence of ACPI enumeration
intel:
- fetch community only when we need it
- refine intel_config_set_pull() function
- Replace kernel.h by what is actually being used
- Simplify code with cleanup helpers
lynxpoint:
- Replace kernel.h by what is actually being used
- drop runtime PM support
merrifield:
- Replace kernel.h by what is actually being used
moorefield:
- Replace kernel.h by what is actually being used
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The kernel.h is a mess of unrelated things and we only used it
as a proxy to array_size.h, hence switch from former to the latter.
While at it, group and sort the headers where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
pinctrl_register_one_pin() doesn't check the result of radix_tree_insert()
despite they both may return a negative error code. Linus Walleij said he
has copied the radix tree code from kernel/irq/ where the functions calling
radix_tree_insert() are *void* themselves; I think it makes more sense to
propagate the errors from radix_tree_insert() upstream if we can do that...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230719202253.13469-3-s.shtylyov@omp.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_generic_add_group() doesn't check the result of radix_tree_insert()
despite they both may return a negative error code. Linus Walleij said he
has copied the radix tree code from kernel/irq/ where the functions calling
radix_tree_insert() are *void* themselves; I think it makes more sense to
propagate the errors from radix_tree_insert() upstream if we can do that...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230719202253.13469-2-s.shtylyov@omp.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The gpio_to_chip() function refers to the global GPIO numberspace
which is a problem we want to get rid of. Get this function out
of the header and open code it into gpiolib with appropriate FIXME
notices so no new users appear in the kernel.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is a few things done:
- include only the headers we are direct user of
- when pointer is in use, provide a forward declaration
- add missing headers
- group generic headers and subsystem headers
- sort each group alphabetically
While at it, fix some awkward indentations.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Pull pin control updates from Linus Walleij:
"The most interesting aspect is that we now have initial support for
the Apple pin controller as used in the M1 laptops and the iPhones
which is a step forward for using Linux efficiently on this Apple
silicon.
Core changes:
- Add infrastructure for per-parent interrupt data to support the
Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC. This is
used in all modern Apple silicon such as the M1 laptops but also in
at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to
use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML"
* tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits)
pinctrl: add pinctrl/GPIO driver for Apple SoCs
dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl
dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl
gpio: Allow per-parent interrupt data
pinctrl: tegra: Fix warnings and error
pinctrl: intel: Kconfig: Add configuration menu to Intel pin control
pinctrl: tegra: Use correct offset for pin group
pinctrl: core: fix possible memory leak in pinctrl_enable()
pinctrl: bcm2835: Allow building driver as a module
pinctrl: equilibrium: Fix function addition in multiple groups
pinctrl: tegra: Add pinmux support for Tegra194
pinctrl: tegra: include lpdr pin properties
pinctrl: mediatek: add support for MT7986 SoC
dt-bindings: pinctrl: update bindings for MT7986 SoC
pinctrl: microchip sgpio: use reset driver
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding
dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells
pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip
pinctrl: qcom: spmi-mpp: hardcode IRQ counts
pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip
...
Pull pin control updates from Linus Walleij:
"There is a lot going on!
Core changes:
- A semantic change to handle pinmux and pinconf in explicit order
while up until now we depended on the semantic order in the device
tree. The device tree is a functional programming language and does
not imply any order, so the right thing is for the pin control core
to provide these semantics.
- Add a new pinmux-select debugfs file which makes it possible to go
in and select functions for a pin manually (iteratively, at the
prompt) for debugging purposes.
- Fixes to gpio regmap handling for a new pin control driver making
use of regmap-gpio.
- Use octal permissions on debugfs files.
New drivers:
- A massive rewrite of the former custom pin control driver for MIPS
Broadcom devices to instead use the pin control subsystem. New pin
control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368,
BCM63268 and BCM6318 SoC variants are implemented.
- Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B
in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are
supported.
- Support for the Rockchip RK3568/RK3566 pin controller.
- Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000.
- Support for Mediatek MTK8195.
- Add a new Xilinx ZynqMP pin control driver.
Driver improvements and non-urgent fixes:
- Modularization and improvements of the Rockchip drivers.
- Some new pins added to the description of new Renesas SoCs.
- Clarifications of the GPIO base calculation in the Intel driver.
- Fix the function names for the MPP54 and MPP55 pins in the Armada
CP110 pin controller.
- GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.
- Support for ACPI probing of the Qualcomm SC8180x.
- Fix interrupt clear status on rockchip
- Fix some missing pins on the Ingenic JZ4770, some semantic fixes
for the behaviour of the Ingenic pin controller. Add DMIC pins for
JZ4780, X1000, X1500 and X1830.
- A slew of janitorial like of_node_put() calls"
* tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
pinctrl: Add Xilinx ZynqMP pinctrl driver support
firmware: xilinx: Add pinctrl support
pinctrl: rockchip: do coding style for mux route struct
pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param
pinctrl: Introduce MODE group in enum pin_config_param
pinctrl: Keep enum pin_config_param ordered by name
dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver
pinctrl: core: Fix kernel doc string for pin_get_name()
pinctrl: mediatek: use spin lock in mtk_rmw
pinctrl: add drive for I2C related pins on MT8195
pinctrl: add pinctrl driver on mt8195
dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
pinctrl: Ingenic: Add pinctrl driver for X2000.
pinctrl: Ingenic: Add pinctrl driver for JZ4775.
pinctrl: Ingenic: Add pinctrl driver for JZ4755.
pinctrl: Ingenic: Add pinctrl driver for JZ4750.
pinctrl: Ingenic: Add pinctrl driver for JZ4730.
dt-bindings: pinctrl: Add bindings for new Ingenic SoCs.
pinctrl: Ingenic: Reformat the code.
pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs.
...
Right now the handling order depends on how entries are coming which is
corresponding with order in DT. We have reached the case with DT overlays
where conf and mux descriptions are exchanged which ends up in sequence
that firmware has been asked to perform configuration before requesting the
pin.
The patch is enforcing the order that pin is requested all the time first
followed by pin configuration. This change will ensure that firmware gets
requests in the right order.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/cfbe01f791c2dd42a596cbda57e15599969b57aa.1615364211.git.michal.simek@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
