The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240307180359.190008-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull soundwire updates from Vinod Koul:
- Core: add concept of controller_id to deal with clear Controller /
Manager hierarchy
- bunch of qcom driver refactoring for qcom_swrm_stream_alloc_ports(),
qcom_swrm_stream_alloc_ports() and setting controller id to hw master
id
* tag 'soundwire-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: drop bus freq calculation and set 'max_clk_freq'
soundwire: generic_bandwidth_allocation use bus->params.max_dr_freq
soundwire: qcom: set controller id to hw master id
soundwire: fix initializing sysfs for same devices on different buses
soundwire: bus: introduce controller_id
soundwire: stream: constify sdw_port_config when adding devices
soundwire: qcom: move sconfig in qcom_swrm_stream_alloc_ports() out of critical section
soundwire: qcom: drop unneeded qcom_swrm_stream_alloc_ports() cleanup
Currently the Qualcomm Soundwire controller in its DAI startup op
allocates the Soundwire stream runtime. This works fine for existing
designs, but has limitations for stream runtimes with multiple
controllers, like upcoming Qualcomm X1E80100 SoC with four WSA8840
speakers on two Soundwire controllers.
When two Soundwire controllers are added to sound card codecs, Soundwire
startup() is called twice, one for each Soundwire controller, and second
execution overwrites what was set before. During shutdown() this causes
double free.
It is expected to have only one Soundwire stream runtime, thus it should
be allocated from SoC soundcard context startup(), not from each
Soundwire startup(). Such way will properly handle both cases: one and
two Soundwire controllers in the stream runtime.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231128165638.757665-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Soundwire v2.0.0 comes with a new register LINK_STATUS for the
FRAME_GEN_ENABLED field (bit indicating that an active frame is
running). The old register COMP_STATUS is still there and still works,
although the new one is preferred in downstream sources. Probably
because it allows to choose Soundwire instance per CPU. Most of the
code allowing to use new register for Soundwire v2.0.0 was already there
as part of commit 312355a6a9 ("soundwire: qcom: add support for v2.0.0
controller"), so switch to it in swrm_wait_for_frame_gen_enabled()
function. This should not have functional impact, because the old
register still behaves correctly.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230728112848.67092-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull soundwire updates from Vinod Koul:
"Device numbering and intel driver changes are main features:
- Core support for soundwire device number allocation
- intel driver updates for adding hw_params for DAI ops, hybrid
number allocation and power managemnt callback updates
- DT header include changes for subsystem"
* tag 'soundwire-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add DAI hw_params/prepare/hw_free callbacks
soundwire: intel_auxdevice: add hybrid IDA-based device_number allocation
soundwire: bus: add callbacks for device_number allocation
soundwire: extend parameters of new_peripheral_assigned() callback
soundWire: intel_auxdevice: resume 'sdw-master' on startup and system resume
soundwire: intel_auxdevice: enable pm_runtime earlier on startup
soundwire: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174946.4063995-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 57ed510b05 ("soundwire: qcom: use
pm_runtime_resume_and_get()") which introduced unbalanced
pm_runtime_put(), when device did not have runtime PM enabled.
If pm_runtime_resume_and_get() failed with -EACCES, the driver continued
execution and finally called pm_runtime_put_autosuspend(). Since
pm_runtime_resume_and_get() drops the usage counter on every error, this
lead to double decrement of that counter visible in certain debugfs
actions on unattached devices (still in reset state):
$ cat /sys/kernel/debug/soundwire/master-0-0/sdw:0:0217:f001:00:0/registers
qcom-soundwire 3210000.soundwire-controller: swrm_wait_for_wr_fifo_avail err write overflow
soundwire sdw-master-0: trf on Slave 1 failed:-5 read addr e36 count 1
soundwire sdw:0:0217:f001:00:0: Runtime PM usage count underflow!
Fixes: 57ed510b05 ("soundwire: qcom: use pm_runtime_resume_and_get()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230517163750.997629-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently the driver supports Qualcomm Soundwire controller versions
from v1.3 till v1.7 which mostly have same register layout. With
coming Qualcomm Soundwire v2.0, several registers were moved and
changed, thus a different register layout will have to be supported.
Prepare for this by:
1. Renaming few register defines to indicate v1.3 (earliest supported)
version,
2. Add a simple table for mapping register to its offset,
3. Change the code to use the mapping table.
Since only few registers differ, this solution seems easier then
switching to regmap fields.
Reviewed-by: Srinivas Kandagagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418095447.577001-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are two issues related to the number of ports coming from
Devicetree when exceeding in total QCOM_SDW_MAX_PORTS. Both lead to
incorrect memory accesses:
1. With DTS having too big value of input or output ports, the driver,
when copying port parameters from local/stack arrays into 'pconfig'
array in 'struct qcom_swrm_ctrl', will iterate over their sizes.
2. If DTS also has too many parameters for these ports (e.g.
qcom,ports-sinterval-low), the driver will overflow buffers on the
stack when reading these properties from DTS.
Add a sanity check so incorrect DTS will not cause kernel memory
corruption.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230222144412.237832-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull soundwire updates from Vinod Koul:
"Updates for Intel, Cadence and Qualcomm drivers:
- another round of Intel driver cleanup to prepare for future code
reorg which is expected in next cycle (Pierre-Louis Bossart)
- bus unattach notifications processing during re-enumeration along
with Cadence driver updates for this (Richard Fitzgerald)
- Qualcomm driver updates to handle device0 status (Srinivas
Kandagatla)"
* tag 'soundwire-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (42 commits)
soundwire: intel: add helper to stop bus
soundwire: intel: introduce helpers to start bus
soundwire: intel: introduce intel_shim_check_wake() helper
soundwire: intel: simplify read ops assignment
soundwire: intel: remove intel_init() wrapper
soundwire: intel: move shim initialization before power up/down
soundwire: intel: remove clock_stop parameter in intel_shim_init()
soundwire: intel: move all PDI initialization under intel_register_dai()
soundwire: intel: move DAI registration and debugfs init earlier
soundwire: intel: simplify flow and use devm_ for DAI registration
soundwire: intel: fix error handling on dai registration issues
soundwire: cadence: Simplify error paths in cdns_xfer_msg()
soundwire: cadence: Fix error check in cdns_xfer_msg()
soundwire: cadence: Write to correct address for each FIFO chunk
soundwire: bus: Fix wrong port number in sdw_handle_slave_alerts()
soundwire: qcom: do not send status of device 0 during alert
soundwire: qcom: update status from device id 1
soundwire: cadence: Don't overwrite msg->buf during write commands
soundwire: bus: Don't exit early if no device IDs were programmed
soundwire: cadence: Fix lost ATTACHED interrupts when enumerating
...
By default autoenumeration is enabled on QCom SoundWire controller
which means the core should not be dealing with device 0 w.r.t enumeration.
During Enumeration if SoundWire core sees status[0] as SDW_SLAVE_ATTACHED and
start programming the device id, however reading DEVID registers return zeros
which does not match to any of the slaves in the list and the core attempts
to park this device to Group 13. This results in adding SoundWire device
with enumeration address 0:0:0:0
Fix this by not passing device 0 status to SoundWire core.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916135352.19114-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for controlling soundwire audio CGCR interface using clock
framework to make hclk ungating with software. As per new hardware
changes, software has to always ungate hclk if soundwire is operational
and keep it running. This requirement is for latest LPASS chipsets for
RX, TX and WSA path to work.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/1652877755-25120-1-git-send-email-quic_srivasam@quicinc.com
[vkoul: change patch subsystem tag]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently timeout for autoenumeration during probe and bus reset is set to
2 secs which is really a big value. This can have an adverse effect on
boot time if the slave device is not ready/reset.
This was the case with wcd938x which was not reset yet but we spent 2
secs waiting in the soundwire controller probe. Reduce this time to
1/10 of Hz which should be good enough time to finish autoenumeration
if any slaves are available on the bus.
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220506084705.18525-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
