Pull sound updates from Takashi Iwai:
"This was a relatively calm cycle, and most of changes are rather small
device-specific fixes. Here are highlights:
Core:
- Further enhancements of ALSA rawmidi and sequencer APIs for MIDI
2.0
- compress-offload API extensions for ASRC support
ASoC:
- Allow clocking on each DAI in an audio graph card to be configured
separately
- Improved power management for Renesas RZ-SSI
- KUnit testing for the Cirrus DSP framework
- Memory to meory operation support for Freescale/NXP platforms
- Support for pause operations in SOF
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
HD- and USB-audio:
- Add support for Focusrite Scarlett 4th Gen 16i16, 18i16, and 18i20
interfaces via new FCP driver
- TAS2781 SPI HD-audio sub-codec support
- Various device-specific quirks as usual"
* tag 'sound-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (235 commits)
ALSA: hda: tas2781-spi: Fix bogus error handling in tas2781_hda_spi_probe()
ALSA: hda: tas2781-spi: Fix error code in tas2781_read_acpi()
ALSA: hda: tas2781-spi: Delete some dead code
ALSA: usb: fcp: Fix return code from poll ops
ALSA: usb: fcp: Fix incorrect resp->opcode retrieval
ALSA: usb: fcp: Fix meter_levels type to __le32
ALSA: hda/realtek: Enable Mute LED on HP Laptop 14s-fq1xxx
ALSA: hda: tas2781-spi: Fix -Wsometimes-uninitialized in tasdevice_spi_switch_book()
ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions
ALSA: hda: tas2781-spi: select CRC32 instead of CRC32_SARWATE
ALSA: usb: fcp: Fix hwdep read ops types
ALSA: scarlett2: Add device_setup option to use FCP driver
ALSA: FCP: Add Focusrite Control Protocol driver
ALSA: hda/tas2781: Add tas2781 hda SPI driver
ALSA: hda/realtek - Fixed headphone distorted sound on Acer Aspire A115-31 laptop
ASoC: xilinx: xlnx_spdif: Simpify using devm_clk_get_enabled()
ALSA: hda: Support for Ideapad hotkey mute LEDs
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83JX, 83MC and 83NM
ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 83LC
ASoC: dapm: add support for preparing streams
...
Pull regmap updates from Mark Brown:
"There's one big bit of work this time around, the addition of support
for a greater range of MBQ access sizes to SoundWire devices together
with support for deferred read/write.
The MBQ register maps generally have variable register sizes, the
variable regiseter size support allows them to be handled much more
naturally within regmap with less open coding in drivers.
The deferred read/write support avoids spurious errors when devices
make use of a bus feature allowing them to indicate they're busy.
These changes pull in a supporting SoundWire change, and there's an
ASoC change building off the new code.
The remainder of the changes are code cleanups"
* tag 'regmap-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Add support for SDCA deferred controls
regmap: sdw-mbq: Add support for further MBQ register sizes
ASoC: SDCA: Update list of entity_0 controls
soundwire: SDCA: Add additional SDCA address macros
regmap: regmap_multi_reg_read(): make register list const
regmap: cache: rbtree: use krealloc_array() to replace krealloc()
regmap: cache: mapple: use kmalloc_array() to replace kmalloc()
regmap: place foo / 8 and foo % 8 closer to each other
regmap: Use BITS_TO_BYTES()
regmap: cache: Use BITS_TO_BYTES()
ASoC: Updates for v6.14
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
As of commit cb18cd2603 ("ASoC: soc-core: do rtd->id trick at
snd_soc_add_pcm_runtime()") the ID stored in the PCM runtime data can
no longer be safely used to index the priv->dai_props array. This is
because the ID may be modified during snd_soc_add_pcm_runtime(), thus
resulting in an ID that's no longer a valid array index.
To fix this, use the position of the dai_link stored inside the PCM
runtime data relative to the start of the dai_link array as index into
the priv->dai_props array.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20250114184314.3583-2-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the original change, rawmidi_info.tied_device showed -1 for the
unknown or untied device. But this would require the user-space to
check the protocol version and judge the value conditionally, which
is rather error-prone.
Instead, set the tied_device = 0 to be default as unknown, and
indicate the real device with the offset 1, for achieving more
backward compatibility.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20250114104711.19197-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current ASoC is using dai_link->dai_fmt to set DAI format for both
CPU/Codec. But because it is using same settings, and
SND_SOC_DAIFMT_CLOCK_PROVIDER is flipped for CPU, we can't set both
CPU/Codec as clock consumer, for example.
To solve this issue, this patch enable to use extra format for each
DAI which can keep compatibility with legacy system,
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
Legacy
dai_fmt includes 1, 2, 3, 4
New idea
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87r05go5ja.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
So far we notify the sequencer client and port changes upon UMP FB
changes, but those aren't really corresponding to the UMP updates.
e.g. when a FB info gets updated, it's not notified but done only when
some of sequencer port attribute is changed. This is no ideal
behavior.
This patch adds the two new sequencer event types for notifying the
UMP EP and FB changes via the announce port. The new event takes
snd_seq_ev_ump_notify type data, which is compatible with
snd_seq_addr (where the port number is replaced with the block
number).
The events are sent when the EP and FB info gets updated explicitly
via ioctl, or the backend UMP receives the corresponding UMP
messages.
The sequencer protocol version is bumped to 1.0.5 along with it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de
The UMP legacy rawmidi may turn on/off the substream dynamically
depending on the UMP Function Block information. So far, there was no
direct way to know whether the substream is disabled (inactive) or
not; at most one can take a look at the substream name string or try
to open and get -ENODEV.
This patch extends the rawmidi info ioctl to show the current inactive
state of the given substream. When the selected substream is
inactive, info flags field contains the new bit flag
SNDRV_RAWMIDI_INFO_STREAM_INACTIVE.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-3-tiwai@suse.de
The UMP legacy rawmidi is derived from the UMP rawmidi, but currently
there is no way to know which device is involved in other side.
This patch extends the rawmidi info ioctl to show the tied device
number. As default it stores -1, indicating that no tied device.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-2-tiwai@suse.de
The snd_hdac_adsp_xxx() wrap snd_hdac_reg_xxx() helpers to simplify
register access for AudioDSP drivers e.g.: the avs-driver. Byte- and
word-variants of said helps do not expand to bare readx/writex()
operations but functions instead and, due to pointer type
incompatibility, cause compilation to fail.
As the macros are utilized by the avs-driver alone, relocate the code
introduced with commit c19bd02e90 ("ALSA: hda: Add helper macros for
DSP capable devices") into the avs/ directory and update it to operate
on 'adev' i.e.: the avs-driver-context directly to fix the issue.
Fixes: c19bd02e90 ("ALSA: hda: Add helper macros for DSP capable devices")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250110113326.3809897-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update the list of entity_0 controls to better match version v1.0 of the
SDCA specification. Remove both INTSTAT_CLEAR and INT_ENABLE as these are
no longer used, and add some missing controls and bits into the enum. Also
rename the SDCA_CONTROL prefix to SDCA_CTL because this better matches the
macros in the sdw_registers.h header, and the names can get quite long so
saving a few characters is definitely a plus.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We introduced a couple of helpers for copying iomem over iov_iter, and
the functions were formed like the former copy_from/to_user(), and the
return value was adjusted to 0/-EFAULT, which made the code transition
a bit easier at that time.
OTOH, the standard copy_from/to_iter() functions have different
argument orders and the return value, and this difference can be
confusing. It's not only confusing but dangerous; actually I did
write a wrong code due to that once :-<
For reducing the confusion, this patch changes the syntax of those
helpers to align with the standard copy_from/to_iter(). The argument
order is changed and the return value is the size of copied bytes.
The callers of those functions are updated accordingly, too.
Link: https://patch.msgid.link/20241230114903.4959-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SDCA only supports 3-bits for the function address, but the ACPI value
is 64-bits. Update the code that parses this to do a bounds check
and error out on invalid addresses. Currently, an invalid address
would truncate to the bottom 3-bits when used and thus use a likely
incorrect address. With the bounds check, it is also now safe to
shrink the size of the adr member of sdca_function_desc to a u8 and
rearrange the struct members to pack better with the new size of adr.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20241220173516.907406-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use snd_soc_dai_set_tdm_slot() on capture DAIs to prevent multiple
aggregated amps from trying to send data at the same time.
When the capture DAIs of multiple amps on a bus are aggregated they will
all be sharing the same bit slots for transmitted audio. This would lead
to bus errors if all channels on all amps were enabled, because multiple
amps would be trying to send data at the same time.
To prevent this, the available channels are divided between the amps on a
bus so that only one amp will be sending data for each channel position.
A CS35L56 has 4 TX channels, which must be split between all the amps on a
bus so that no two amps are using the same channel. This is done simply by
dividing by the number of amps on the bus, so that 1 amp can use all
4 channels, 2 amps can use 2 channels each, and 3 or 4 amps can only use
1 channel each.
The amps are usually aggregated across multiple SoundWire buses. In this
case there will be multiple cpu DAIs in the dailink. The channel mapping
is used to determine which amps are on each bus. The allocation of the
4 channels is done separately for each bus (only amps on the same bus can
interfere with each other).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241203104534.56719-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add speaker id check by gpio in ACPI for ASUS projects.
In other vendors, speaker id was checked by BIOS, and was applied in
last bit of subsys id, so we can load corresponding firmware binary file
for its speaker by subsys id.
But in ASUS project, the firmware binary name will be appended an extra
number to tell the speakers from different vendors. And this single digit
come from gpio level of speaker id in BIOS.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20241123073718.475-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Updates for v6.13
This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:
- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.
snd_pcm_mmap_data_open() and _close() are defined as inline functions
in the public sound/pcm.h, but those are used only locally in
pcm_native.c, hence they should be better placed there.
Also, those are referred as callbacks, the useless inline is dropped.
Link: https://patch.msgid.link/20241113111628.17069-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Some SKUs are using host DMICs rather than the cs42l43 DMICs, update the
endpoint structure for these SKUs to remove the DMIC endpoint.
Charles Keepax (4):
ASoC: sdw_utils: Add support for exclusion DAI quirks
ASoC: sdw_utils: Add a quirk to allow the cs42l43 mic DAI to be
ignored
ASoC: Intel: sof_sdw: Add quirk for cs42l43 system using host DMICs
ASoC: Intel: sof_sdw: Add quirks for some new Lenovo laptops
include/sound/soc_sdw_utils.h | 2 ++
sound/soc/intel/boards/sof_sdw.c | 41 +++++++++++++++++++++++++++++
sound/soc/sdw_utils/soc_sdw_utils.c | 5 +++-
3 files changed, 47 insertions(+), 1 deletion(-)
--
2.43.0
Add new module for SDCA (SoundWire Device Class for Audio) support.
For now just add a parser to identify the SDCA revision and the
function mask.
Note that the SDCA definitions and related MIPI DisCo properties are
defined only for ACPI platforms and extracted with _DSD helpers. There
is currently no support for Device Tree in the specification, the
'depends on ACPI' reflects this design limitation. This might change
in a future revision of the specification but for SDCA 1.0 ACPI is the
only supported type of platform firmware.
The SDCA library is defined with static inline fallbacks, which will
allow for unconditional addition of SDCA support in common parts of
the code.
The design follows a four-step process:
1) Basic information related to Functions is extracted from MIPI DisCo
tables and stored in the 'struct sdw_slave'. Devm_ based memory
allocation is not allowed at this point prior to a driver probe, so we only
store the function node, address and type.
2) When a codec driver probes, it will register subdevices for each
Function identified in phase 1)
3) a driver will probe for each subdevice and addition parsing/memory
allocation takes place at this level. devm_ based allocation is highly
encouraged to make error handling manageable.
4) Before the peripheral device becomes physically attached, register
access is not permitted and the regmaps are cache-only. When
peripheral device is enumerated, the bus level uses the
'update_status' notification; after optional device-level
initialization, the codec driver will notify each of the subdevices so
that they can start interacting with the hardware.
Note that the context extracted in 1) should be arguably be handled
completely in the codec driver probe. That would however make it
difficult to use the ACPI information for machine quirks, and
e.g. select different machine driver and topologies as done for the
RT712_VB handling later in the series. To make the implementation of
quirks simpler, this patchset extracts a minimal amount of context
(interface revision and number/type of Functions) before the codec
driver probe, and stores this context in the scope of the 'struct
sdw_slave'.
The SDCA library can also be used in a vendor-specific driver without
creating subdevices, e.g. to retrieve the 'initialization-table'
values to write platform-specific values as needed.
For more technical details, the SDCA specification is available for
public downloads at https://www.mipi.org/mipi-sdca-v1-0-download
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
