Add support for board power calibration on Aldebaran.
Board calibration is done after DC offset calibration.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PMFW message which previously thought to only control Z9 controls both
Z9 and Z10. Also HW design team requested that Z9 must only be supported
on eDP due to content protection interop.
[How]
Change zstate support condition to match updated policy
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Populate dtbclk values from bwparams for dcn302, dcn303.
[How]
dtbclk values are fetched from bandwidthparams for all DPM levels and
for DPM levels where smu returns 0, previous level values are reported.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines
of 4K resolution lines to 5 lines of 4K resolution lines. All Line
Buffer can be used as extended memory for P State change latency hiding.
The maximum number of lines is increased to 32 lines. Finally,
LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB
memory piece 2) are not affected, no change in size, only 3 pieces is
affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0
and LB_MEMORY_CONFIG_3 (for 4:2:0) modes.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to
DMUB just remove the function pointer.
[how]
Remove apply_idle_power_optimizations from function pointers structure
for DCN31
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We used to unconditionally set backlight path as AUX for panels capable
of backlight adjustment via DPCD in set default brightness.
[How]
This should be limited to OLED panel only since we control backlight via
PWM path for SDR mode in LCD HDR panel.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
We're missing a default value for dram_channel_width_bytes in the
DCN3.1 SOC bounding box and we don't currently have the interface in
place to query the actual value from VBIOS.
Put in a hardcoded default until we have the interface in place.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hardcoding the VCO frequency isn't correct since we don't own or control
the value.
In the case where the hardcode is also missing we can't lightup display.
[How]
Query from the CLK register instead. Update the DFS frequency to be able
to compute the VCO frequency.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Initialize socclk entries in bandwidth params for dcn302, dcn303.
[How]
Fetch the sockclk values from smu for the DPM levels and for the DPM
levels where smu returns 0, previous level values are reported.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Vertical and horizontal borders in timings are treated as increasing the
active area - vblank and hblank actually shrink.
Our input into DML does not include these borders so it incorrectly
assumes it has more time than available for vstartup and tmdl
calculations for some modes with borders.
An example of such a timing would be 640x480@72Hz:
h_total: 832
h_border_left: 8
h_addressable: 640
h_border_right: 8
h_front_porch: 16
h_sync_width: 40
v_total: 520
v_border_top: 8
v_addressable: 480
v_border_bottom: 8
v_front_porch: 1
v_sync_width: 3
pix_clk_100hz: 315000
[How]
Include borders as part of destination vactive/hactive.
This change DCN20+ so it has wide impact, but the destination vactive
and hactive are only really used for vstartup calculation anyway.
Most modes do not have vertical or horizontal borders.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During S4/S5/reboot, sometimes riommu invalidation request arrive too
early, DCN may be unable to respond to the invalidation request
resulting in pstate hang.
[How]
VBIOS will force allow pstate for riommu invalidation and driver will
clear it after powering down display pipes.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 72a7cf0aec ("drm/amd/display: Keep linebuffer pixel depth at
30bpp for DCE-11.0.") doesn't seems to have fixed 10bit 4K rendering over
DisplayPort for CIK GPUs. On my machine with a HAWAII GPU I get a broken
image that looks like it has an effective resolution of 1920x1080 but
scaled up in an irregular way. Reverting the commit or applying this
patch fixes the problem on v5.14-rc1.
Fixes: 72a7cf0aec ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.")
Acked-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The thunk needs to mmap all BOs for CPU access to allow the debugger to
access them. Invisible ones are mapped with PROT_NONE.
Fixes: 71df0368e9 ("drm/amdgpu: Implement mmap as GEM object function")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The original logic is to update eDP's backlight level
on every amdgpu dm atomic commit, which causes excessive
DMUB write. As a result, when playing game or moving window
around, DMUB timeout and system lagging are observed.
[How]
We only need to update eDP's backlight level when current level
doesn't match requested level.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prange is NULL if vm fault retry on invalid address, for this case, can
not use prange to get pdd, use adev to get gpuidx and then get pdd
instead, then increase pdd vm fault counter.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since there's nothing special in smu implementation for yellow carp,
it's better to reuse the common smu_v13_0 interfaces and drop the
specific smu_v13_0_1.c|h files.
v2: remove the duplicate register offset and shift mask header files as
well.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We're only treating TMDS as a valid target for infoframe updates which
results in PSR being unable to transition from state 4 to state 5.
[How]
Also allow infoframe updates for DCN3.1 - following how we handle
this path for earlier ASIC as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_ras_query_error_count() return an error
if the device doesn't support RAS. This prevents
that function from having to always set the values
of the integer pointers (if set), and thus
prevents function side effects--always to have to
set values of integers if integer pointers set,
regardless of whether RAS is supported or
not--with this change this side effect is
mitigated.
Also, if no pointers are set, don't count, since
we've no way of reporting the counts.
Also, give this function a kernel-doc.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Reported-by: Tom Rix <trix@redhat.com>
Fixes: a46751fbcd ("drm/amdgpu: Fix RAS function interface")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If flr_work takes read_lock, then other threads who takes
read_lock can access hardware when host is doing vf flr.
[How]
flr_work should take write_lock to avoid this case.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull drm fixes from Dave Airlie:
"Some fixes for rc1 that came in the past weeks, mainly a bunch of
amdgpu fixes, some i915 and the rest are misc around the place. I'm
sending this a bit early so some more stuff may show up, but I'll
probably take tomorrow off.
dma-buf:
- doc fixes
amdgpu:
- Misc Navi fixes
- Powergating fix
- Yellow Carp updates
- Beige Goby updates
- S0ix fix
- Revert overlay validation fix
- GPU reset fix for DC
- PPC64 fix
- Add new dimgrey cavefish DID
- RAS fix
- TTM fixes
amdkfd:
- SVM fixes
radeon:
- Fix missing drm_gem_object_put in error path
- NULL ptr deref fix
i915:
- display DP VSC fix
- DG1 display fix
- IRQ fixes
- IRQ demidlayering
gma500:
- bo leaks in error paths fixed"
* tag 'drm-next-2021-07-08-1' of git://anongit.freedesktop.org/drm/drm: (52 commits)
drm/i915: Drop all references to DRM IRQ midlayer
drm/i915: Use the correct IRQ during resume
drm/i915/display/dg1: Correctly map DPLLs during state readout
drm/i915/display: Do not zero past infoframes.vsc
drm/amdgpu: Conditionally reset SDMA RAS error counts
drm/amdkfd: Maintain svm_bo reference in page->zone_device_data
drm/amdkfd: add invalid pages debug at vram migration
drm/amdkfd: skip migration for pages already in VRAM
drm/amdkfd: skip invalid pages during migrations
drm/amdkfd: classify and map mixed svm range pages in GPU
drm/amdkfd: use hmm range fault to get both domain pfns
drm/amdgpu: get owner ref in validate and map
drm/amdkfd: set owner ref to svm range prefault
drm/amdkfd: add owner ref param to get hmm pages
drm/amdkfd: device pgmap owner at the svm migrate init
drm/amdkfd: inc counter on child ranges with xnack off
drm/amd/display: Extend DMUB diagnostic logging to DCN3.1
drm/amdgpu: Update NV SIMD-per-CU to 2
drm/amdgpu: add new dimgrey cavefish DID
drm/amd/pm: skip PrepareMp1ForUnload message in s0ix
...
Pull tracing updates from Steven Rostedt:
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts,
softirqs and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail
what sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event. This has
been hardcoded as "1" since 2015, no tooling should be looking at it
now. If one exists, we can revert this commit, fix that tool and try
to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes
trace events to write to console. When user space starts, this can
easily live lock the system. Having a boot option to stop just after
boot up is useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that
match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path
from user space that can do this. All other paths are considered a
bug.
- Small clean ups and fixes
* tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits)
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
tracing: Simplify & fix saved_tgids logic
treewide: Add missing semicolons to __assign_str uses
tracing: Change variable type as bool for clean-up
trace/timerlat: Fix indentation on timerlat_main()
trace/osnoise: Make 'noise' variable s64 in run_osnoise()
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
tracing: Fix spelling in osnoise tracer "interferences" -> "interference"
Documentation: Fix a typo on trace/osnoise-tracer
trace/osnoise: Fix return value on osnoise_init_hotplug_support
trace/osnoise: Make interval u64 on osnoise_main
trace/osnoise: Fix 'no previous prototype' warnings
tracing: Have osnoise_main() add a quiescent state for task rcu
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
seq_buf: Fix overflow in seq_buf_putmem_hex()
trace/osnoise: Support hotplug operations
trace/hwlat: Support hotplug operations
trace/hwlat: Protect kdata->kthread with get/put_online_cpus
trace: Add timerlat tracer
trace: Add osnoise tracer
...
Pull drm updates from Dave Airlie:
"Highlights:
- AMD enables two more GPUs, with resulting header files
- i915 has started to move to TTM for discrete GPU and enable DG1
discrete GPU support (not by default yet)
- new HyperV drm driver
- vmwgfx adds arm64 support
- TTM refactoring ongoing
- 16bpc display support for AMD hw
Otherwise it's just the usual insane amounts of work all over the
place in lots of drivers and the core, as mostly summarised below:
Core:
- mark AGP ioctls as legacy
- disable force probing for non-master clients
- HDR metadata property helpers
- HDMI infoframe signal colorimetry support
- remove drm_device.pdev pointer
- remove DRM_KMS_FB_HELPER config option
- remove drm_pci_alloc/free
- drm_err_*/drm_dbg_* helpers
- use drm driver names for fbdev
- leaked DMA handle fix
- 16bpc fixed point format fourcc
- add prefetching memcpy for WC
- Documentation fixes
aperture:
- add aperture ownership helpers
dp:
- aux fixes
- downstream 0 port handling
- use extended base receiver capability DPCD
- Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
- mst: use khz as link rate during init
- VCPI fixes for StarTech hub
ttm:
- provide tt_shrink file via debugfs
- warn about freeing pinned BOs
- fix swapping error handling
- move page alignment into BO
- cleanup ttm_agp_backend
- add ttm_sys_manager
- don't override vm_ops
- ttm_bo_mmap removed
- make ttm_resource base of all managers
- remove VM_MIXEDMAP usage
panel:
- sysfs_emit support
- simple: runtime PM support
- simple: power up panel when reading EDID + caching
bridge:
- MHDP8546: HDCP support + DT bindings
- MHDP8546: Register DP AUX channel with userspace
- TI SN65DSI83 + SN65DSI84: add driver
- Sil8620: Fix module dependencies
- dw-hdmi: make CEC driver loading optional
- Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
- It66121: Add driver + DT bindings
- Adv7511: Support I2S IEC958 encoding
- Anx7625: fix power-on delay
- Nwi-dsi: Modesetting fixes; Cleanups
- lt6911: add missing MODULE_DEVICE_TABLE
- cdns: fix PM reference leak
hyperv:
- add new DRM driver for HyperV graphics
efifb:
- non-PCI device handling fixes
i915:
- refactor IP/device versioning
- XeLPD Display IP preperation work
- ADL-P enablement patches
- DG1 uAPI behind BROKEN
- disable mmap ioctl for discerte GPUs
- start enabling HuC loading for Gen12+
- major GuC backend rework for new platforms
- initial TTM support for Discrete GPUs
- locking rework for TTM prep
- use correct max source link rate for eDP
- %p4cc format printing
- GLK display fixes
- VLV DSI panel power fixes
- PSR2 disabled for RKL and ADL-S
- ACPI _DSM invalid access fixed
- DMC FW path abstraction
- ADL-S PCI ID update
- uAPI headers converted to kerneldoc
- initial LMEM support for DG1
- x86/gpu: add Jasperlake to gen11 early quirks
amdgpu:
- Aldebaran updates + initial SR-IOV
- new GPU: Beige Goby and Yellow Carp support
- more LTTPR display work
- Vangogh updates
- SDMA 5.x GCR fixes
- PCIe ASPM support
- Renoir TMZ enablement
- initial multiple eDP panel support
- use fdinfo to track devices/process info
- pin/unpin TTM fixes
- free resource on fence usage query
- fix fence calculation
- fix hotunplug/suspend issues
- GC/MM register access macro cleanup for SR-IOV
- W=1 fixes
- ACPI ATCS/ATIF handling rework
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes
- new INFO query for additional vbios info
amdkfd:
- SR-IOV aldebaran support
- HMM SVM support
radeon:
- SMU regression fixes
- Oland flickering fix
vmwgfx:
- enable console with fbdev emulation
- fix cpu updates of coherent multisample surfaces
- remove reservation semaphore
- add initial SVGA3 support
- support arm64
msm:
- devcoredump support for display errors
- dpu/dsi: yaml bindings conversion
- mdp5: alpha/blend_mode/zpos support
- a6xx: cached coherent buffer support
- gpu iova fault improvement
- a660 support
rockchip:
- RK3036 win1 scaling support
- RK3066/3188 missing register support
- RK3036/3066/3126/3188 alpha support
mediatek:
- MT8167 HDMI support
- MT8183 DPI dual edge support
tegra:
- fixed YUV support/scaling on Tegra186+
ast:
- use pcim_iomap
- fix DP501 EDID
bochs:
- screen blanking support
etnaviv:
- export more GPU ID values to userspace
- add HWDB entry for GPU on i.MX8MP
- rework linear window calcs
exynos:
- pm runtime changes
imx:
- Annotate dma_fence critical section
- fix PRG modifiers after drmm conversion
- Add 8 pixel alignment fix for 1366x768
- fix YUV advertising
- add color properties
ingenic:
- IPU planes fix
panfrost:
- Mediatek MT8183 support + DT bindings
- export AFBC_FEATURES register to userspace
simpledrm:
- %pr for printing resources
nouveau:
- pin/unpin TTM fixes
qxl:
- unpin shadow BO
virtio:
- create dumb BOs as guest blob
vkms:
- drmm_universal_plane_alloc
- add XRGB plane composition
- overlay support"
* tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits)
drm/i915: Reinstate the mmap ioctl for some platforms
drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc
Revert "drm/msm/mdp5: provide dynamic bandwidth management"
drm/msm/mdp5: provide dynamic bandwidth management
drm/msm/mdp5: add perf blocks for holding fudge factors
drm/msm/mdp5: switch to standard zpos property
drm/msm/mdp5: add support for alpha/blend_mode properties
drm/msm/mdp5: use drm_plane_state for pixel blend mode
drm/msm/mdp5: use drm_plane_state for storing alpha value
drm/msm/mdp5: use drm atomic helpers to handle base drm plane state
drm/msm/dsi: do not enable PHYs when called for the slave DSI interface
drm/msm: Add debugfs to trigger shrinker
drm/msm/dpu: Avoid ABBA deadlock between IRQ modules
drm/msm: devcoredump iommu fault support
iommu/arm-smmu-qcom: Add stall support
drm/msm: Improve the a6xx page fault handler
iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info
iommu/arm-smmu: Add support for driver IOMMU fault handlers
drm/msm: export hangcheck_period in debugfs
drm/msm/a6xx: add support for Adreno 660 GPU
...
