[ Upstream commit cfa0904a35 ]
[why]
1. With allow_0_dtb_clk enabled, the time required to latch DTBCLK to 600 MHz
depends on the SMU. If DTBCLK is not latched to 600 MHz before set_mode completes,
gating DTBCLK causes the DP2 sink to lose its clock source.
2. The existing DTBCLK gating sequence ungates DTBCLK based on both pix_clk and ref_dtbclk,
but gates DTBCLK when either pix_clk or ref_dtbclk is zero.
pix_clk can be zero outside the set_mode sequence before DTBCLK is properly latched,
which can lead to DTBCLK being gated by mistake.
[how]
Consider both pixel_clk and ref_dtbclk when determining when it is safe to gate DTBCLK;
this is more accurate.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4701
Fixes: 5949e7c489 ("drm/amd/display: Enable Dynamic DTBCLK Switch")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d04eb0c402780ca037b62a6aecf23b863545ebca)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 678e1cc2f4 ]
xfs/286 produced this report on my test fleet:
==================================================================
BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110
Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184):
memcpy_orig+0x54/0x110
xrep_symlink_salvage_inline+0xb3/0xf0 [xfs]
xrep_symlink_salvage+0x100/0x110 [xfs]
xrep_symlink+0x2e/0x80 [xfs]
xrep_attempt+0x61/0x1f0 [xfs]
xfs_scrub_metadata+0x34f/0x5c0 [xfs]
xfs_ioc_scrubv_metadata+0x387/0x560 [xfs]
xfs_file_ioctl+0xe23/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128
allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago):
xfs_init_local_fork+0x79/0xe0 [xfs]
xfs_iformat_local+0xa4/0x170 [xfs]
xfs_iformat_data_fork+0x148/0x180 [xfs]
xfs_inode_from_disk+0x2cd/0x480 [xfs]
xfs_iget+0x450/0xd60 [xfs]
xfs_bulkstat_one_int+0x6b/0x510 [xfs]
xfs_bulkstat_iwalk+0x1e/0x30 [xfs]
xfs_iwalk_ag_recs+0xdf/0x150 [xfs]
xfs_iwalk_run_callbacks+0xb9/0x190 [xfs]
xfs_iwalk_ag+0x1dc/0x2f0 [xfs]
xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs]
xfs_iwalk+0xa4/0xd0 [xfs]
xfs_bulkstat+0xfa/0x170 [xfs]
xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs]
xfs_file_ioctl+0xbf2/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014
==================================================================
On further analysis, I realized that the second parameter to min() is
not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data
buffer. if_bytes can be smaller than the data fork size because:
(a) the forkoff code tries to keep the data area as large as possible
(b) for symbolic links, if_bytes is the ondisk file size + 1
(c) forkoff is always a multiple of 8.
Case in point: for a single-byte symlink target, forkoff will be
8 but the buffer will only be 2 bytes long.
In other words, the logic here is wrong and we walk off the end of the
incore buffer. Fix that.
Cc: stable@vger.kernel.org # v6.10
Fixes: 2651923d8d ("xfs: online repair of symbolic links")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33ddc796ec ]
The changes modernizes the code by aligning it with current kernel best
practices. It improves code clarity and consistency, as strncpy is deprecated
as explained in Documentation/process/deprecated.rst. This change does
not alter the functionality or introduce any behavioral changes.
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Marcelo Moreira <marcelomoreira1905@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Stable-dep-of: 678e1cc2f4 ("xfs: fix out of bounds memory read error in symlink repair")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91a5409002 upstream.
maple_tree tracepoints contain pointers to function names. Such a pointer
is saved when a tracepoint logs an event. There's no guarantee that it's
still valid when the event is parsed later and the pointer is dereferenced.
The kernel warns about these unsafe pointers.
event 'ma_read' has unsafe pointer field 'fn'
WARNING: kernel/trace/trace.c:3779 at ignore_event+0x1da/0x1e4
Mark the function names as tracepoint_string() to fix the events.
One case that doesn't work without my patch would be trace-cmd record
to save the binary ringbuffer and trace-cmd report to parse it in
userspace. The address of __func__ can't be dereferenced from
userspace but tracepoint_string will add an entry to
/sys/kernel/tracing/printk_formats
Link: https://lkml.kernel.org/r/20251030155537.87972-1-martin@kaiser.cx
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Below is a patch for 6.12.58+ and 6.17.8+ stable branches only.
Upstream does not need this.
Signed-off-by: Jari Ruusu <jariruusu@protonmail.com>
Fixes: da7e8b3823 ("tty/vt: Add missing return value for VT_RESIZE in vt_ioctl()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous commit bdb596ceb4 ("smb: client: fix potential UAF in
smb2_close_cached_fid()") was an incomplete backport and missed one
kref_put() call in cfids_invalidation_worker() that should have been
converted to close_cached_dir().
Fixes: 065bd62412 ("smb: client: fix potential UAF in smb2_close_cached_fid()")"
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eb6e7f520d ]
On PF passthrough environment, after hibernate and then resume, coralgemm
will cause gpu page fault.
Mode1 reset happens during hibernate, but partition mode is not restored
on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right
after resume. When CP access the MQD BO, wrong stride size is used,
this will cause out of bound access on the MQD BO, resulting page fault.
The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called
when resume from a hibernation.
KFD resume is called separately during a reset recovery or resume from
suspend sequence. Hence it's not required to be called as part of
partition switch.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d1b32cfe4a676fe552416cb5ae847b215463a1a)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53afec2c8f ]
The help message incorrectly listed '-t' as the short option for
--threads, but the actual getopt_long configuration uses '-e'.
This mismatch can confuse users and lead to incorrect command-line
usage. This patch updates the usage string to correctly show:
"-e, --threads NRTHR"
to match the implementation.
Note: checkpatch.pl reports a false-positive spelling warning on
'Run', which is intentional.
Link: https://patch.msgid.link/20251106031040.1869-1-zhangchujun@cmss.chinamobile.com
Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90a88306eb ]
Make knav_dma_open_channel consistently return NULL on error instead
of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h
returns NULL when the driver is disabled, but the driver
implementation does not even return NULL or ERR_PTR on failure,
causing inconsistency in the users. This results in a crash in
netcp_free_navigator_resources as followed (trimmed):
Unhandled fault: alignment exception (0x221) at 0xfffffff2
[fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000
Internal error: : 221 [#1] SMP ARM
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE
Hardware name: Keystone
PC is at knav_dma_close_channel+0x30/0x19c
LR is at netcp_free_navigator_resources+0x2c/0x28c
[... TRIM...]
Call trace:
knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c
netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c
netcp_ndo_open from __dev_open+0x114/0x29c
__dev_open from __dev_change_flags+0x190/0x208
__dev_change_flags from netif_change_flags+0x1c/0x58
netif_change_flags from dev_change_flags+0x38/0xa0
dev_change_flags from ip_auto_config+0x2c4/0x11f0
ip_auto_config from do_one_initcall+0x58/0x200
do_one_initcall from kernel_init_freeable+0x1cc/0x238
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x38
[... TRIM...]
Standardize the error handling by making the function return NULL on
all error conditions. The API is used in just the netcp_core.c so the
impact is limited.
Note, this change, in effect reverts commit 5b6cb43b4d ("net:
ethernet: ti: netcp_core: return error while dma channel open issue"),
but provides a less error prone implementation.
Suggested-by: Simon Horman <horms@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251103162811.3730055-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d26e9f669c ]
Since 8b3a087f7f ("ALSA: usb-audio: Unify virtual type units type to
UAC3 values") usb-audio is using UAC3_CLOCK_SOURCE instead of
bDescriptorSubtype, later refactored with e0ccdef926 ("ALSA: usb-audio:
Clean up check_input_term()") into parse_term_uac2_clock_source().
This breaks the clock source selection for at least my
1397:0003 BEHRINGER International GmbH FCA610 Pro.
Fix by using UAC2_CLOCK_SOURCE in parse_term_uac2_clock_source().
Fixes: 8b3a087f7f ("ALSA: usb-audio: Unify virtual type units type to UAC3 values")
Signed-off-by: René Rebe <rene@exactco.de>
Link: https://patch.msgid.link/20251125.154149.1121389544970412061.rene@exactco.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31475b8811 ]
When a zero ASCE is passed to the __ptep_rdp() inline assembly, the
generated instruction should have the R3 field of the instruction set to
zero. However the inline assembly is written incorrectly: for such cases a
zero is loaded into a register allocated by the compiler and this register
is then used by the instruction.
This means that selected TLB entries may not be flushed since the specified
ASCE does not match the one which was used when the selected TLB entries
were created.
Fix this by removing the asce and opt parameters of __ptep_rdp(), since
all callers always pass zero, and use a hard-coded register zero for
the R3 field.
Fixes: 0807b85652 ("s390/mm: add support for RDP (Reset DAT-Protection)")
Cc: stable@vger.kernel.org
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d52dea485c ]
If user provides a large value (such as 0x80) for parameter
prefetch_mem_region_instance in vm_bind ioctl, it will cause
BIT(prefetch_region) overflow as below:
"
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in drivers/gpu/drm/xe/xe_vm.c:3414:7
shift exponent 128 is too large for 64-bit type 'long unsigned int'
CPU: 8 UID: 0 PID: 53120 Comm: xe_exec_system_ Tainted: G W 6.18.0-rc1-lgci-xe-kernel+ #200 PREEMPT(voluntary)
Tainted: [W]=WARN
Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
Call Trace:
<TASK>
dump_stack_lvl+0xa0/0xc0
dump_stack+0x10/0x20
ubsan_epilogue+0x9/0x40
__ubsan_handle_shift_out_of_bounds+0x10e/0x170
? mutex_unlock+0x12/0x20
xe_vm_bind_ioctl.cold+0x20/0x3c [xe]
...
"
Fix it by validating prefetch_region before the BIT() usage.
v2: Add Closes and Cc stable kernels. (Matt)
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6478
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251112181005.2120521-2-shuicheng.lin@intel.com
(cherry picked from commit 8f565bdd14eec5611cc041dba4650e42ccdf71d9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit d52dea485c)
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3f9eacf4f0 upstream.
32bit ID registers aren't getting much love these days, and are
often missed in updates. One of these updates broke restoring
a GICv2 guest on a GICv3 machine.
Instead of performing a piecemeal fix, just bite the bullet
and make all 32bit ID regs fully writable. KVM itself never
relies on them for anything, and if the VMM wants to mess up
the guest, so be it.
Fixes: 5cb57a1aff ("KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is presented to the guest")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20251030122707.2033690-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The recent backport of the upstream commit 05a1fc5efd ("ALSA:
usb-audio: Fix potential overflow of PCM transfer buffer") on the
older stable kernels like 6.12.y was broken since it doesn't consider
the mutex unlock, where the upstream code manages with guard().
In the older code, we still need an explicit unlock.
This is a fix that corrects the error path, applied only on old stable
trees.
Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/aSWtH0AZH5+aeb+a@duo.ucw.cz
Fixes: 98e9d5e33b ("ALSA: usb-audio: Fix potential overflow of PCM transfer buffer")
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c15d5c62ab ]
When a netdev issues a RX async resync request for a TLS connection,
the TLS module handles it by logging record headers and attempting to
match them to the tcp_sn provided by the device. If a match is found,
the TLS module approves the tcp_sn for resynchronization.
While waiting for a device response, the TLS module also increments
rcd_delta each time a new TLS record is received, tracking the distance
from the original resync request.
However, if the device response is delayed or fails (e.g due to
unstable connection and device getting out of tracking, hardware
errors, resource exhaustion etc.), the TLS module keeps logging and
incrementing, which can lead to a WARN() when rcd_delta exceeds the
threshold.
To address this, introduce tls_offload_rx_resync_async_request_cancel()
to explicitly cancel resync requests when a device response failure is
detected. Call this helper also as a final safeguard when rcd_delta
crosses its threshold, as reaching this point implies that earlier
cancellation did not occur.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761508983-937977-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34892cfec0 ]
Update tls_offload_rx_resync_async_request_start() and
tls_offload_rx_resync_async_request_end() to get a struct
tls_offload_resync_async parameter directly, rather than
extracting it from struct sock.
This change aligns the function signatures with the upcoming
tls_offload_rx_resync_async_request_cancel() helper, which
will be introduced in a subsequent patch.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761508983-937977-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9311e9540a ]
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Link: https://bugs.launchpad.net/bugs/2129812
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0b7780602 ]
Commit 995412e23b ("blk-mq: Replace tags->lock with SRCU for tag
iterators") introduced the following regression:
Call trace:
__srcu_read_lock+0x30/0x80 (P)
blk_mq_tagset_busy_iter+0x44/0x300
scsi_host_busy+0x38/0x70
ufshcd_print_host_state+0x34/0x1bc
ufshcd_link_startup.constprop.0+0xe4/0x2e0
ufshcd_init+0x944/0xf80
ufshcd_pltfrm_init+0x504/0x820
ufs_rockchip_probe+0x2c/0x88
platform_probe+0x5c/0xa4
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x150
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1e0
bus_for_each_dev+0x7c/0xdc
driver_attach+0x24/0x30
bus_add_driver+0x110/0x230
driver_register+0x68/0x130
__platform_driver_register+0x20/0x2c
ufs_rockchip_pltform_init+0x1c/0x28
do_one_initcall+0x60/0x1e0
kernel_init_freeable+0x248/0x2c4
kernel_init+0x20/0x140
ret_from_fork+0x10/0x20
Fix this regression by making scsi_host_busy() check whether the SCSI
host tag set has already been initialized. tag_set->ops is set by
scsi_mq_setup_tags() just before blk_mq_alloc_tag_set() is called. This
fix is based on the assumption that scsi_host_busy() and
scsi_mq_setup_tags() calls are serialized. This is the case in the UFS
driver.
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20251007214800.1678255-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e4d9120cf ]
Add proper cleanup of ctx->source and fc->source to the
cifs_parse_mount_err error handler. This ensures that memory allocated
for the source strings is correctly freed on all error paths, matching
the cleanup already performed in the success path by
smb3_cleanup_fs_context_contents().
Pointers are also set to NULL after freeing to prevent potential
double-free issues.
This change fixes a memory leak originally detected by syzbot. The
leak occurred when processing Opt_source mount options if an error
happened after ctx->source and fc->source were successfully
allocated but before the function completed.
The specific leak sequence was:
1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory
2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory
3. A subsequent error jumps to cifs_parse_mount_err
4. The old error handler freed passwords but not the source strings,
causing the memory to leak.
This issue was not addressed by commit e8c73eb7db ("cifs: client:
fix memory leak in smb3_fs_context_parse_param"), which only fixed
leaks from repeated fsconfig() calls but not this error path.
Patch updated with minor change suggested by kernel test robot
Reported-by: syzbot+87be6809ed9bf6d718e3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=87be6809ed9bf6d718e3
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20d7338f2d ]
The kernel UAPI headers already contain fixed-width integer types, there
is no need to rely on the libc types. There may not be a libc available
or the libc may not provides the <stdint.h>, like for example on nolibc.
This also aligns the header with the rest of the LoongArch UAPI headers.
Fixes: 803b0fc5c3 ("LoongArch: Add process management")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bf3a476ce ]
Miao Wang reported a bug of SO_PEEK_OFF on AF_UNIX SOCK_STREAM
socket.
The unexpected behaviour is triggered when the peek offset is
larger than the recv queue and the thread is unblocked by new
data.
Let's assume a socket which has "aaaa" in the recv queue and
the peek offset is 4.
First, unix_stream_read_generic() reads the offset 4 and skips
the skb(s) of "aaaa" with the code below:
skip = max(sk_peek_offset(sk, flags), 0); /* @skip is 4. */
do {
...
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
...
skb = skb_peek_next(skb, &sk->sk_receive_queue);
if (!skb)
goto again; /* @skip is 0. */
}
The thread jumps to the 'again' label and goes to sleep since
new data has not arrived yet.
Later, new data "bbbb" unblocks the thread, and the thread jumps
to the 'redo:' label to restart the entire process from the first
skb in the recv queue.
do {
...
redo:
...
last = skb = skb_peek(&sk->sk_receive_queue);
...
again:
if (skb == NULL) {
...
timeo = unix_stream_data_wait(sk, timeo, last,
last_len, freezable);
...
goto redo; /* @skip is 0 !! */
However, the peek offset is not reset in the path.
If the buffer size is 8, recv() will return "aaaabbbb" without
skipping any data, and the final offset will be 12 (the original
offset 4 + peeked skbs' length 8).
After sleeping in unix_stream_read_generic(), we have to fetch the
peek offset again.
Let's move the redo label before mutex_lock(&u->iolock).
Fixes: 9f389e3567 ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag")
Reported-by: Miao Wang <shankerwangmiao@gmail.com>
Closes: https://lore.kernel.org/netdev/3B969F90-F51F-4B9D-AB1A-994D9A54D460@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251117174740.3684604-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f94c1a114a ]
The function devl_rate_nodes_destroy is documented to "Unset parent for
all rate objects". However, it was only calling the driver-specific
`rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing
the parent's refcount, without actually setting the
`devlink_rate->parent` pointer to NULL.
This leaves a dangling pointer in the `devlink_rate` struct, which cause
refcount error in netdevsim[1] and mlx5[2]. In addition, this is
inconsistent with the behavior of `devlink_nl_rate_parent_node_set`,
where the parent pointer is correctly cleared.
This patch fixes the issue by explicitly setting `devlink_rate->parent`
to NULL after notifying the driver, thus fulfilling the function's
documented behavior for all rate objects.
[1]
repro steps:
echo 1 > /sys/bus/netdevsim/new_device
devlink dev eswitch set netdevsim/netdevsim1 mode switchdev
echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs
devlink port function rate add netdevsim/netdevsim1/test_node
devlink port function rate set netdevsim/netdevsim1/128 parent test_node
echo 1 > /sys/bus/netdevsim/del_device
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
__nsim_dev_port_del+0x6c/0x70 [netdevsim]
nsim_dev_reload_destroy+0x11c/0x140 [netdevsim]
nsim_drv_remove+0x2b/0xb0 [netdevsim]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xc6/0x130
device_del+0x159/0x3c0
device_unregister+0x1a/0x60
del_device_store+0x111/0x170 [netdevsim]
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x55/0x10f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000
devlink port function rate add pci/0000:08:00.0/group1
devlink port function rate set pci/0000:08:00.0/32768 parent group1
modprobe -r mlx5_ib mlx5_fwctl mlx5_core
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core]
mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core]
mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core]
mlx5_sf_esw_event+0xc4/0x120 [mlx5_core]
notifier_call_chain+0x33/0xa0
blocking_notifier_call_chain+0x3b/0x50
mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core]
mlx5_eswitch_disable+0x63/0x90 [mlx5_core]
mlx5_unload+0x1d/0x170 [mlx5_core]
mlx5_uninit_one+0xa2/0x130 [mlx5_core]
remove_one+0x78/0xd0 [mlx5_core]
pci_device_remove+0x39/0xa0
device_release_driver_internal+0x194/0x1f0
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x53/0x1f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: d755598450 ("devlink: Allow setting parent node of rate objects")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763381149-1234377-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6010d4d8b5 ]
s32_pmx_gpio_request_enable() does not initialize the newly-allocated
gpio_pin_config::list before adding it to s32_pinctrl::gpio_configs.
This could result in a linked list corruption.
Initialize the new list_head with INIT_LIST_HEAD() to fix this.
Fixes: fd84aaa817 ("pinctrl: add NXP S32 SoC family support")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97ea34defb ]
s32_pinctrl_desc is allocated with devm_kmalloc(), but not all of its
fields are initialized. Notably, num_custom_params is used in
pinconf_generic_parse_dt_config(), resulting in intermittent allocation
errors, such as the following splat when probing i2c-imx:
WARNING: CPU: 0 PID: 176 at mm/page_alloc.c:4795 __alloc_pages_noprof+0x290/0x300
[...]
Hardware name: NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) (DT)
[...]
Call trace:
__alloc_pages_noprof+0x290/0x300 (P)
___kmalloc_large_node+0x84/0x168
__kmalloc_large_node_noprof+0x34/0x120
__kmalloc_noprof+0x2ac/0x378
pinconf_generic_parse_dt_config+0x68/0x1a0
s32_dt_node_to_map+0x104/0x248
dt_to_map_one_config+0x154/0x1d8
pinctrl_dt_to_map+0x12c/0x280
create_pinctrl+0x6c/0x270
pinctrl_get+0xc0/0x170
devm_pinctrl_get+0x50/0xa0
pinctrl_bind_pins+0x60/0x2a0
really_probe+0x60/0x3a0
[...]
__platform_driver_register+0x2c/0x40
i2c_adap_imx_init+0x28/0xff8 [i2c_imx]
[...]
This results in later parse failures that can cause issues in dependent
drivers:
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property
[...]
pca953x 0-0022: failed writing register: -6
i2c i2c-0: IMX I2C adapter registered
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property
i2c i2c-1: IMX I2C adapter registered
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property
i2c i2c-2: IMX I2C adapter registered
Fix this by initializing s32_pinctrl_desc with devm_kzalloc() instead of
devm_kmalloc() in s32_pinctrl_probe(), which sets the previously
uninitialized fields to zero.
Fixes: fd84aaa817 ("pinctrl: add NXP S32 SoC family support")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Tested-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23a5b9b12d ]
Improve the cleanup on releasing PTP resources in error path.
The error case might happen either at the driver probe and PTP
feature initialization or on PTP restart (errors in reset handling, NVM
update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf
function) and 'ps_lock' mutex deinitialization were missed.
Additionally, ptp clock was not unregistered in the latter case.
Keep PTP state as 'uninitialized' on init to distinguish between error
scenarios and to avoid resource release duplication at driver removal.
The consequence of missing ice_ptp_cleanup_pf call is the following call
trace dumped when ice_adapter object is freed (port list is not empty,
as it is required at this stage):
[ T93022] ------------[ cut here ]------------
[ T93022] WARNING: CPU: 10 PID: 93022 at
ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice]
...
[ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice]
...
[ T93022] Call Trace:
[ T93022] <TASK>
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] ? __warn.cold+0xb0/0x10e
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] ? report_bug+0xd8/0x150
[ T93022] ? handle_bug+0xe9/0x110
[ T93022] ? exc_invalid_op+0x17/0x70
[ T93022] ? asm_exc_invalid_op+0x1a/0x20
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] pci_device_remove+0x42/0xb0
[ T93022] device_release_driver_internal+0x19f/0x200
[ T93022] driver_detach+0x48/0x90
[ T93022] bus_remove_driver+0x70/0xf0
[ T93022] pci_unregister_driver+0x42/0xb0
[ T93022] ice_module_exit+0x10/0xdb0 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
...
[ T93022] ---[ end trace 0000000000000000 ]---
[ T93022] ice: module unloaded
Fixes: e800654e85 ("ice: Use ice_adapter for PTP shared data instead of auxdev")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 896f1a2493 ]
The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterate
over 'cqe->len_list[]' using only a zero-length terminator as
the stopping condition. If the terminator was missing or
malformed, the loop could run past the end of the fixed-size array.
Add an explicit bound check using ARRAY_SIZE() in both loops to prevent
a potential out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 55482edc25 ("qede: Add slowpath/fastpath support and enable hardware GRO")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Link: https://patch.msgid.link/20251113112757.4166625-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bed22c7b90 ]
ret_set_ksft_status() calls ksft_status_merge() with the current return
status and the last one. It treats a non-zero return code from
ksft_status_merge() as an indication that the return status was
overwritten by the last one and therefore overwrites the return message
with the last one.
Currently, ksft_status_merge() returns a non-zero return code even if
the current return status and the last one are equal. This results in
return messages being overwritten which is counter-productive since we
are more interested in the first failure message and not the last one.
Fix by changing ksft_status_merge() to only return a non-zero return
code if the current return status was actually changed.
Add a test case which checks that the first error message is not
overwritten.
Before:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [FAIL]
retmsg=tfail expected tfail2
[...]
# echo $?
1
After:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [ OK ]
[...]
# echo $?
0
Fixes: 596c8819cb ("selftests: forwarding: Have RET track kselftest framework constants")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251116081029.69112-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfe28c4167 ]
The validation of the set(nsh(...)) action is completely wrong.
It runs through the nsh_key_put_from_nlattr() function that is the
same function that validates NSH keys for the flow match and the
push_nsh() action. However, the set(nsh(...)) has a very different
memory layout. Nested attributes in there are doubled in size in
case of the masked set(). That makes proper validation impossible.
There is also confusion in the code between the 'masked' flag, that
says that the nested attributes are doubled in size containing both
the value and the mask, and the 'is_mask' that says that the value
we're parsing is the mask. This is causing kernel crash on trying to
write into mask part of the match with SW_FLOW_KEY_PUT() during
validation, while validate_nsh() doesn't allocate any memory for it:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1c2383067 P4D 1c2383067 PUD 20b703067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 8 UID: 0 Kdump: loaded Not tainted 6.17.0-rc4+ #107 PREEMPT(voluntary)
RIP: 0010:nsh_key_put_from_nlattr+0x19d/0x610 [openvswitch]
Call Trace:
<TASK>
validate_nsh+0x60/0x90 [openvswitch]
validate_set.constprop.0+0x270/0x3c0 [openvswitch]
__ovs_nla_copy_actions+0x477/0x860 [openvswitch]
ovs_nla_copy_actions+0x8d/0x100 [openvswitch]
ovs_packet_cmd_execute+0x1cc/0x310 [openvswitch]
genl_family_rcv_msg_doit+0xdb/0x130
genl_family_rcv_msg+0x14b/0x220
genl_rcv_msg+0x47/0xa0
netlink_rcv_skb+0x53/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x280/0x3b0
netlink_sendmsg+0x1f7/0x430
____sys_sendmsg+0x36b/0x3a0
___sys_sendmsg+0x87/0xd0
__sys_sendmsg+0x6d/0xd0
do_syscall_64+0x7b/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The third issue with this process is that while trying to convert
the non-masked set into masked one, validate_set() copies and doubles
the size of the OVS_KEY_ATTR_NSH as if it didn't have any nested
attributes. It should be copying each nested attribute and doubling
them in size independently. And the process must be properly reversed
during the conversion back from masked to a non-masked variant during
the flow dump.
In the end, the only two outcomes of trying to use this action are
either validation failure or a kernel crash. And if somehow someone
manages to install a flow with such an action, it will most definitely
not do what it is supposed to, since all the keys and the masks are
mixed up.
Fixing all the issues is a complex task as it requires re-writing
most of the validation code.
Given that and the fact that this functionality never worked since
introduction, let's just remove it altogether. It's better to
re-introduce it later with a proper implementation instead of trying
to fix it in stable releases.
Fixes: b2d0f5d5dc ("openvswitch: enable NSH support")
Reported-by: Junvy Yang <zhuque@tencent.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20251112112246.95064-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cbab9f0da ]
Add a call to put_pid() corresponding to get_task_pid().
host1x_memory_context_alloc() does not take ownership of the PID so we
need to free it here to avoid leaking.
Signed-off-by: Prateek Agarwal <praagarwal@nvidia.com>
Fixes: e09db97889 ("drm/tegra: Support context isolation")
[mperttunen@nvidia.com: reword commit message]
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250919-host1x-put-pid-v1-1-19c2163dfa87@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 407a06507c ]
The function mlxsw_sp_flower_stats() calls mlxsw_sp_acl_ruleset_get() to
obtain a ruleset reference. If the subsequent call to
mlxsw_sp_acl_rule_lookup() fails to find a rule, the function returns
an error without releasing the ruleset reference, causing a memory leak.
Fix this by using a goto to the existing error handling label, which
calls mlxsw_sp_acl_ruleset_put() to properly release the reference.
Fixes: 7c1b8eb175 ("mlxsw: spectrum: Add support for TC flower offload statistics")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251112052114.1591695-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97b726eb1d ]
The WMI driver core only supports GUID strings containing only
uppercase characters, however the GUID string used by the
msi-wmi-platform driver contains a single lowercase character.
This prevents the WMI driver core from matching said driver to
its WMI device.
Fix this by turning the lowercase character into a uppercase
character. Also update the WMI driver development guide to warn
about this.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Fixes: 9c0beb6b29 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251110111253.16204-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c93433fd4e ]
It turns out that the GUID used by the msi-wmi-platform driver
(ABBC0F60-8EA1-11D1-00A0-C90629100000) is not unique, but was instead
copied from the WIndows Driver Samples. This means that this driver
could load on devices from other manufacturers that also copied this
GUID, potentially causing hardware errors.
Prevent this by only loading on devices whitelisted via DMI. The DMI
matches where taken from the msi-ec driver.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Fixes: 9c0beb6b29 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251110111253.16204-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b07cdf86a ]
The driver calls fwnode_get_named_child_node() which takes a reference
on the child node, but never releases it, which causes a reference leak.
Fix by using devm_add_action_or_reset() to automatically release the
reference when the device is removed.
Fixes: d5282a5392 ("pinctrl: cs42l43: Add support for the cs42l43")
Suggested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59630e2ccd ]
Add a check to ensure locally generated packets (skb->sk != NULL) do
not use direct output in tunnel mode, as these packets require proper
L2 header setup that is handled by the normal XFRM processing path.
Fixes: 5eddd76ec2 ("xfrm: fix tunnel mode TX datapath in packet offload mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61fafbee6c ]
The GSO segmentation functions for ESP tunnel mode
(xfrm4_tunnel_gso_segment and xfrm6_tunnel_gso_segment) were
determining the inner packet's L2 protocol type by checking the static
x->inner_mode.family field from the xfrm state.
This is unreliable. In tunnel mode, the state's actual inner family
could be defined by x->inner_mode.family or by
x->inner_mode_iaf.family. Checking only the former can lead to a
mismatch with the actual packet being processed, causing GSO to create
segments with the wrong L2 header type.
This patch fixes the bug by deriving the inner mode directly from the
packet's inner protocol stored in XFRM_MODE_SKB_CB(skb)->protocol.
Instead of replicating the code, this patch modifies the
xfrm_ip2inner_mode helper function. It now correctly returns
&x->inner_mode if the selector family (x->sel.family) is already
specified, thereby handling both specific and AF_UNSPEC cases
appropriately.
With this change, ESP GSO can use xfrm_ip2inner_mode to get the
correct inner mode. It doesn't affect existing callers, as the updated
logic now mirrors the checks they were already performing externally.
Fixes: 26dbd66eab ("esp: choose the correct inner protocol for GSO on inter address family tunnels")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 369f772299 ]
The pinctrl-rtd driver uses 'devm_regmap_init_mmio', which requires
'REGMAP_MMIO' to be enabled.
Without this selection, the build fails with an undefined reference:
aarch64-none-linux-gnu-ld: drivers/pinctrl/realtek/pinctrl-rtd.o: in
function rtd_pinctrl_probe': pinctrl-rtd.c:(.text+0x5a0): undefined
reference to __devm_regmap_init_mmio_clk'
Fix this by selecting 'REGMAP_MMIO' in the Kconfig.
Fixes: e99ce78030 ("pinctrl: realtek: Add common pinctrl driver for Realtek DHC RTD SoCs")
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dcf617bec ]
xfrm_state_construct can fail without setting an error if the
requested pcpu_num value is too big. Set err and add an extack message
to avoid confusing userspace.
Fixes: 1ddf9916ac ("xfrm: Add support for per cpu xfrm state handling.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5bab4c8939 upstream.
[Why]
On DCN20 & DCN30, the 6th DPP's & HUBP's are powered on permanently and
cannot be power gated. Thus, when dpp_reset() is invoked for the DPP5,
while it's still powered on, the cached cursor_state
(dpp_base->pos.cur0_ctl.bits.cur0_enable)
and the actual state (CUR0_ENABLE) bit are unsycned. This can cause a
double cursor in full screen with non-native scaling.
[How]
Force disable cursor on DPP5 on plane powerdown for ASICs w/ 6 DPPs/HUBPs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4673
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79b3c037f972dcb13e325a8eabfb8da835764e15)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1788ef3072 upstream.
[Why]
Existing routine has two conversion sequence,
pbn_to_kbps and kbps_to_pbn with margin.
Non of those has without-margin calculation.
kbps_to_pbn with margin conversion includes
fec overhead which has already been included in
pbn_div calculation with 0.994 factor considered.
It is a double counted fec overhead factor that causes
potential bw loss.
[How]
Add without-margin calculation.
Fix fec overhead double counted issue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3735
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e0dec00f3d05e8c0eceaaebfdca217f8d10d380c)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71ad9054c1 upstream.
[Why]
When a monitor is booting it's possible that it isn't ready to retrieve
link caps and this can lead to an EDID read failure:
```
[drm:retrieve_link_cap [amdgpu]] *ERROR* retrieve_link_cap: Read receiver caps dpcd data failed.
amdgpu 0000:c5:00.0: [drm] *ERROR* No EDID read.
```
[How]
Rather than msleep once and try a few times, msleep each time. Should
be no changes for existing working monitors, but should correct reading
caps on a monitor that is slow to boot.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 669dca37b3348a447db04bbdcbb3def94d5997cc)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80d8a9ad15 upstream.
[Why]
Accoreding to CP updated to RS64 on gfx11,
WRITE_DATA with PREEMPTION_META_MEMORY(dst_sel=8) is illegal for CP FW.
That packet is used for MCBP on F32 based system.
So it would lead to incorrect GRBM write and FW is not handling that
extra case correctly.
[How]
With gfx11 rs64 enabled, skip emit de meta data.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8366cd442d226463e673bed5d199df916f4ecbcf)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31ab31433c upstream.
During the suspend sequence VPE is already going to be power gated
as part of vpe_suspend(). It's unnecessary to call during calls to
amdgpu_device_set_pg_state().
It actually can expose a race condition with the firmware if s0i3
sequence starts as well. Drop these calls.
Cc: Peyton.Lee@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2a6c826cfeedd7714611ac115371a959ead55bda)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fff0c87996 upstream.
With the current fastclose implementation, the mptcp_do_fastclose()
helper is in charge of two distinct actions: send the fastclose reset
and cleanup the subflows.
Formally decouple the two steps, ensuring that mptcp explicitly closes
all the subflows after the mentioned helper.
This will make the upcoming fix simpler, and allows dropping the 2nd
argument from mptcp_destroy_common(). The Fixes tag is then the same as
in the next commit to help with the backports.
Fixes: d21f834855 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-5-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f102d747c upstream.
The rcv window is shared among all the subflows. Currently, MPTCP sync
the TCP-level rcv window with the MPTCP one at tcp_transmit_skb() time.
The above means that incoming data may sporadically observe outdated
TCP-level rcv window and being wrongly dropped by TCP.
Address the issue checking for the edge condition before queuing the
data at TCP level, and eventually syncing the rcv window as needed.
Note that the issue is actually present from the very first MPTCP
implementation, but backports older than the blamed commit below will
range from impossible to useless.
Before:
$ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow
TcpExtBeyondWindow 14 0.0
After:
$ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow
TcpExtBeyondWindow 0 0.0
Fixes: fa3fe2b150 ("mptcp: track window announced to peer")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-2-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e4ec14dc1 upstream.
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all userspace tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 290493078b ("selftests: mptcp: join: userspace: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-9-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb13c6bb81 upstream.
In rare cases, when the test environment is very slow, some endpoints
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all endpoints tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 6457595db9 ("selftests: mptcp: join: endpoints: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-8-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17393fa7b7 upstream.
I'm observing very frequent self-tests failures in case of fallback when
running on a CONFIG_PREEMPT kernel.
The root cause is that subflow_sched_work_if_closed() closes any subflow
as soon as it is half-closed and has no incoming data pending.
That works well for regular subflows - MPTCP needs bi-directional
connectivity to operate on a given subflow - but for fallback socket is
race prone.
When TCP peer closes the connection before the MPTCP one,
subflow_sched_work_if_closed() will schedule the MPTCP worker to
gracefully close the subflow, and shortly after will do another schedule
to inject and process a dummy incoming DATA_FIN.
On CONFIG_PREEMPT kernel, the MPTCP worker can kick-in and close the
fallback subflow before subflow_sched_work_if_closed() is able to create
the dummy DATA_FIN, unexpectedly interrupting the transfer.
Address the issue explicitly avoiding closing fallback subflows on when
the peer is only half-closed.
Note that, when the subflow is able to create the DATA_FIN before the
worker invocation, the worker will change the msk state before trying to
close the subflow and will skip the latter operation as the msk will not
match anymore the precondition in __mptcp_close_subflow().
Fixes: f09b0ad55a ("mptcp: close subflow when receiving TCP+FIN")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-3-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae15506024 upstream.
The CI reports sporadic failures of the fastclose self-tests. The root
cause is a duplicate reset, not carrying the relevant MPTCP option.
In the failing scenario the bad reset is received by the peer before
the fastclose one, preventing the reception of the latter.
Indeed there is window of opportunity at fastclose time for the
following race:
mptcp_do_fastclose
__mptcp_close_ssk
__tcp_close()
tcp_set_state() [1]
tcp_send_active_reset() [2]
After [1] the stack will send reset to in-flight data reaching the now
closed port. Such reset may race with [2].
Address the issue explicitly sending a single reset on fastclose before
explicitly moving the subflow to close status.
Fixes: d21f834855 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/596
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-6-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e15395f6d upstream.
mptcp_cleanup_rbuf() needs to know the last most recent, mptcp-level
rcv_wnd sent, and such information is tracked into the msk->old_wspace
field, updated at ack transmission time by mptcp_write_options().
Fallback socket do not add any mptcp options, such helper is never
invoked, and msk->old_wspace value remain stale. That in turn makes
ack generation at recvmsg() time quite random.
Address the issue ensuring mptcp_write_options() is invoked even for
fallback sockets, and just update the needed info in such a case.
The issue went unnoticed for a long time, as mptcp currently overshots
the fallback socket receive buffer autotune significantly. It is going
to change in the near future.
Fixes: e3859603ba ("mptcp: better msk receive window updates")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/594
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-1-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 035bca3f01 upstream.
syzbot reported use-after-free in mptcp_schedule_work() [1]
Issue here is that mptcp_schedule_work() schedules a work,
then gets a refcount on sk->sk_refcnt if the work was scheduled.
This refcount will be released by mptcp_worker().
[A] if (schedule_work(...)) {
[B] sock_hold(sk);
return true;
}
Problem is that mptcp_worker() can run immediately and complete before [B]
We need instead :
sock_hold(sk);
if (schedule_work(...))
return true;
sock_put(sk);
[1]
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 29 at lib/refcount.c:25 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:25
Call Trace:
<TASK>
__refcount_add include/linux/refcount.h:-1 [inline]
__refcount_inc include/linux/refcount.h:366 [inline]
refcount_inc include/linux/refcount.h:383 [inline]
sock_hold include/net/sock.h:816 [inline]
mptcp_schedule_work+0x164/0x1a0 net/mptcp/protocol.c:943
mptcp_tout_timer+0x21/0xa0 net/mptcp/protocol.c:2316
call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747
expire_timers kernel/time/timer.c:1798 [inline]
__run_timers kernel/time/timer.c:2372 [inline]
__run_timer_base+0x648/0x970 kernel/time/timer.c:2384
run_timer_base kernel/time/timer.c:2393 [inline]
run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403
handle_softirqs+0x22f/0x710 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
run_ktimerd+0xcf/0x190 kernel/softirq.c:1138
smpboot_thread_fn+0x542/0xa60 kernel/smpboot.c:160
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Cc: stable@vger.kernel.org
Fixes: 3b1d6210a9 ("mptcp: implement and use MPTCP-level retransmission")
Reported-by: syzbot+355158e7e301548a1424@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6915b46f.050a0220.3565dc.0028.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251113103924.3737425-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6b533adfc upstream.
If there is no valid cache info detected (may happen in virtual machine)
for pci_dfl_cache_line_size, kernel shouldn't panic. Because in the PCI
core it will be evaluated to (L1_CACHE_BYTES >> 2).
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 316e361b5d upstream.
The "groups" property can hold multiple entries (e.g.
toshiba/tmpv7708-rm-mbrc.dts file), so allow that by dropping incorrect
type (pinmux-node.yaml schema already defines that as string-array) and
adding constraints for items. This fixes dtbs_check warnings like:
toshiba/tmpv7708-rm-mbrc.dtb: pinctrl@24190000 (toshiba,tmpv7708-pinctrl):
pwm-pins:groups: ['pwm0_gpio16_grp', 'pwm1_gpio17_grp', 'pwm2_gpio18_grp', 'pwm3_gpio19_grp'] is too long
Fixes: 1825c1fe00 ("pinctrl: Add DT bindings for Toshiba Visconti TMPV7700 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebd729fef3 upstream.
Fix a regression that has caused accesses to the PCI MMIO window to
complete unclaimed in non-EVA configurations with the SOC-it family of
system controllers, preventing PCI devices from working that use MMIO.
In the non-EVA case PHYS_OFFSET is set to 0, meaning that PCI_BAR0 is
set with an empty mask (and PCI_HEAD4 matches addresses starting from 0
accordingly). Consequently all addresses are matched for incoming DMA
accesses from PCI. This seems to confuse the system controller's logic
and outgoing bus cycles targeting the PCI MMIO window seem not to make
it to the intended devices.
This happens as well when a wider mask is used with PCI_BAR0, such as
0x80000000 or 0xe0000000, that makes addresses match that overlap with
the PCI MMIO window, which starts at 0x10000000 in our configuration.
Set the mask in PCI_BAR0 to 0xf0000000 for non-EVA then, covering the
non-EVA maximum 256 MiB of RAM, which is what YAMON does and which used
to work correctly up to the offending commit. Set PCI_P2SCMSKL to match
PCI_BAR0 as required by the system controller's specification, and match
PCI_P2SCMAPL to PCI_HEAD4 for identity mapping.
Verified with:
Core board type/revision = 0x0d (Core74K) / 0x01
System controller/revision = MIPS SOC-it 101 OCP / 1.3 SDR-FW-4:1
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x1c
Processor ID/revision = 0x97 (MIPS 74Kf) / 0x4c
for non-EVA and with:
Core board type/revision = 0x0c (CoreFPGA-5) / 0x00
System controller/revision = MIPS ROC-it2 / 0.0 FW-1:1 (CLK_unknown) GIC
Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00
Processor ID/revision = 0xa0 (MIPS interAptiv UP) / 0x20
for EVA/non-EVA, fixing:
defxx 0000:00:12.0: assign IRQ: got 10
defxx: v1.12 2021/03/10 Lawrence V. Stefani and others
0000:00:12.0: Could not read adapter factory MAC address!
vs:
defxx 0000:00:12.0: assign IRQ: got 10
defxx: v1.12 2021/03/10 Lawrence V. Stefani and others
0000:00:12.0: DEFPA at MMIO addr = 0x10142000, IRQ = 10, Hardware addr = 00-00-f8-xx-xx-xx
0000:00:12.0: registered as fddi0
for non-EVA and causing no change for EVA.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 422dd25664 ("MIPS: Malta: Allow PCI devices DMA to lower 2GB physical")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6965188f8 upstream.
If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and we
attempt to dereference it in tcm_loop_tpg_address_show() we will get a
segfault, see below for an example. So, check tl_hba->sh before
dereferencing it.
Unable to allocate struct scsi_host
BUG: kernel NULL pointer dereference, address: 0000000000000194
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024
RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop]
...
Call Trace:
<TASK>
configfs_read_iter+0x12d/0x1d0 [configfs]
vfs_read+0x1b5/0x300
ksys_read+0x6f/0xf0
...
Cc: stable@vger.kernel.org
Fixes: 2628b352c3 ("tcm_loop: Show address of tpg in configfs")
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Allen Pais <apais@linux.microsoft.com>
Link: https://patch.msgid.link/1762370746-6304-1-git-send-email-hamzamahfooz@linux.microsoft.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea3442efab upstream.
Now target is removed from nvme_fc_ctrl_free() which is the ctrl->ref
release handler. And even admin queue is unquiesced there, this way
is definitely wrong because the ctr->ref is grabbed when submitting
command.
And Marco observed that nvme_fc_ctrl_free() can be called from request
completion code path, and trigger kernel warning since request completes
from softirq context.
Fix the issue by moveing target removal into nvme_fc_delete_ctrl(),
which is also aligned with nvme-tcp and nvme-rdma.
Patch originally proposed by Ming Lei, then modified to move the tagset
removal down to after nvme_fc_delete_association() after further testing.
Cc: Marco Patalano <mpatalan@redhat.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69aeb50731 upstream.
In the pegasus_notetaker driver, the pegasus_probe() function allocates
the URB transfer buffer using the wMaxPacketSize value from
the endpoint descriptor. An attacker can use a malicious USB descriptor
to force the allocation of a very small buffer.
Subsequently, if the device sends an interrupt packet with a specific
pattern (e.g., where the first byte is 0x80 or 0x42),
the pegasus_parse_packet() function parses the packet without checking
the allocated buffer size. This leads to an out-of-bounds memory access.
Fixes: 1afca2b66a ("Input: add Pegasus Notetaker tablet driver")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://lore.kernel.org/r/20251007214131.3737115-2-eeodqql09@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e08969c4d6 upstream.
If cros_ec_keyb_register_matrix() isn't called (due to
`buttons_switches_only`) in cros_ec_keyb_probe(), `ckdev->idev` remains
NULL. An invalid memory access is observed in cros_ec_keyb_process()
when receiving an EC_MKBP_EVENT_KEY_MATRIX event in cros_ec_keyb_work()
in such case.
Unable to handle kernel read from unreadable memory at virtual address 0000000000000028
...
x3 : 0000000000000000 x2 : 0000000000000000
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
input_event
cros_ec_keyb_work
blocking_notifier_call_chain
ec_irq_thread
It's still unknown about why the kernel receives such malformed event,
in any cases, the kernel shouldn't access `ckdev->idev` and friends if
the driver doesn't intend to initialize them.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20251104070310.3212712-1-tzungbi@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 660b299bed upstream.
Commit b6bcbce335 ("soc/tegra: pmc: Ensure power-domains are in a
known state") was introduced so that all power domains get initialized
to a known working state when booting and it does this by shutting them
down (including asserting resets and disabling clocks) before registering
each power domain with the genpd framework, leaving it to each driver to
later on power its needed domains.
This caused the Google Pixel C to hang when booting due to a workaround
in the DSI driver introduced in commit b22fd0b963 ("drm/tegra: dsi:
Clear enable register if powered by bootloader") meant to handle the case
where the bootloader enabled the DSI hardware module. The workaround relies
on reading a hardware register to determine the current status and after
b6bcbce335 that now happens in a powered down state thus leading to
the boot hang.
Fix this by reverting b22fd0b963 since currently we are guaranteed
that the hardware will be fully reset by the time we start enabling the
DSI module.
Fixes: b6bcbce335 ("soc/tegra: pmc: Ensure power-domains are in a known state")
Cc: stable@vger.kernel.org
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251103-diogo-smaug_ec_typec-v1-1-be656ccda391@tecnico.ulisboa.pt
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ceb6ac211 upstream.
Correct RGMII delay application logic in lan937x_set_tune_adj().
The function was missing `data16 &= ~PORT_TUNE_ADJ` before setting the
new delay value. This caused the new value to be bitwise-OR'd with the
existing PORT_TUNE_ADJ field instead of replacing it.
For example, when setting the RGMII 2 TX delay on port 4, the
intended TUNE_ADJUST value of 0 (RGMII_2_TX_DELAY_2NS) was
incorrectly OR'd with the default 0x1B (from register value 0xDA3),
leaving the delay at the wrong setting.
This patch adds the missing mask to clear the field, ensuring the
correct delay value is written. Physical measurements on the RGMII TX
lines confirm the fix, showing the delay changing from ~1ns (before
change) to ~2ns.
While testing on i.MX 8MP showed this was within the platform's timing
tolerance, it did not match the intended hardware-characterized value.
Fixes: b19ac41faa ("net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251114090951.4057261-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9d1f38df7 upstream.
Replace close_cached_dir() calls under cfid_list_lock with a new
close_cached_dir_locked() variant that uses kref_put() instead of
kref_put_lock() to avoid recursive locking when dropping references.
While the existing code works if the refcount >= 2 invariant holds,
this area has proven error-prone. Make deadlocks impossible and WARN
on invariant violations.
Cc: stable@vger.kernel.org
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b118906833 upstream.
Commit cf3fc03762 ("ata: libata-scsi: Fix ata_to_sense_error() status
handling") fixed ata_to_sense_error() to properly generate sense key
ABORTED COMMAND (without any additional sense code), instead of the
previous bogus sense key ILLEGAL REQUEST with the additional sense code
UNALIGNED WRITE COMMAND, for a failed command.
However, this broke suspend for Security locked drives (drives that have
Security enabled, and have not been Security unlocked by boot firmware).
The reason for this is that the SCSI disk driver, for the Synchronize
Cache command only, treats any sense data with sense key ILLEGAL REQUEST
as a successful command (regardless of ASC / ASCQ).
After commit cf3fc03762 ("ata: libata-scsi: Fix ata_to_sense_error()
status handling") the code that treats any sense data with sense key
ILLEGAL REQUEST as a successful command is no longer applicable, so the
command fails, which causes the system suspend to be aborted:
sd 1:0:0:0: PM: dpm_run_callback(): scsi_bus_suspend returns -5
sd 1:0:0:0: PM: failed to suspend async: error -5
PM: Some devices failed to suspend, or early wake event detected
To make suspend work once again, for a Security locked device only,
return sense data LOGICAL UNIT ACCESS NOT AUTHORIZED, the actual sense
data which a real SCSI device would have returned if locked.
The SCSI disk driver treats this sense data as a successful command.
Cc: stable@vger.kernel.org
Reported-by: Ilia Baryshnikov <qwelias@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220704
Fixes: cf3fc03762 ("ata: libata-scsi: Fix ata_to_sense_error() status handling")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c77b3b79a9 upstream.
The sockmap feature allows bpf syscall from userspace, or based
on bpf sockops, replacing the sk_prot of sockets during protocol stack
processing with sockmap's custom read/write interfaces.
'''
tcp_rcv_state_process()
syn_recv_sock()/subflow_syn_recv_sock()
tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB)
bpf_skops_established <== sockops
bpf_sock_map_update(sk) <== call bpf helper
tcp_bpf_update_proto() <== update sk_prot
'''
When the server has MPTCP enabled but the client sends a TCP SYN
without MPTCP, subflow_syn_recv_sock() performs a fallback on the
subflow, replacing the subflow sk's sk_prot with the native sk_prot.
'''
subflow_syn_recv_sock()
subflow_ulp_fallback()
subflow_drop_ctx()
mptcp_subflow_ops_undo_override()
'''
Then, this subflow can be normally used by sockmap, which replaces the
native sk_prot with sockmap's custom sk_prot. The issue occurs when the
user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops().
Here, it uses sk->sk_prot to compare with the native sk_prot, but this
is incorrect when sockmap is used, as we may incorrectly set
sk->sk_socket->ops.
This fix uses the more generic sk_family for the comparison instead.
Additionally, this also prevents a WARNING from occurring:
result from ./scripts/decode_stacktrace.sh:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \
(net/mptcp/protocol.c:4005)
Modules linked in:
...
PKRU: 55555554
Call Trace:
<TASK>
do_accept (net/socket.c:1989)
__sys_accept4 (net/socket.c:2028 net/socket.c:2057)
__x64_sys_accept (net/socket.c:2067)
x64_sys_call (arch/x86/entry/syscall_64.c:41)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f87ac92b83d
---[ end trace 0000000000000000 ]---
Fixes: 0b4f33def7 ("mptcp: fix tcp fallback crash")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251111060307.194196-3-jiayuan.chen@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbade4bd08 upstream.
The sockmap feature allows bpf syscall from userspace, or based on bpf
sockops, replacing the sk_prot of sockets during protocol stack processing
with sockmap's custom read/write interfaces.
'''
tcp_rcv_state_process()
subflow_syn_recv_sock()
tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB)
bpf_skops_established <== sockops
bpf_sock_map_update(sk) <== call bpf helper
tcp_bpf_update_proto() <== update sk_prot
'''
Consider two scenarios:
1. When the server has MPTCP enabled and the client also requests MPTCP,
the sk passed to the BPF program is a subflow sk. Since subflows only
handle partial data, replacing their sk_prot is meaningless and will
cause traffic disruption.
2. When the server has MPTCP enabled but the client sends a TCP SYN
without MPTCP, subflow_syn_recv_sock() performs a fallback on the
subflow, replacing the subflow sk's sk_prot with the native sk_prot.
'''
subflow_ulp_fallback()
subflow_drop_ctx()
mptcp_subflow_ops_undo_override()
'''
Subsequently, accept::mptcp_stream_accept::mptcp_fallback_tcp_ops()
converts the subflow to plain TCP.
For the first case, we should prevent it from being combined with sockmap
by setting sk_prot->psock_update_sk_prot to NULL, which will be blocked by
sockmap's own flow.
For the second case, since subflow_syn_recv_sock() has already restored
sk_prot to native tcp_prot/tcpv6_prot, no further action is needed.
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251111060307.194196-2-jiayuan.chen@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3cd1548a27 upstream.
In systemd we're trying to switch the internal credentials setup logic
to new mount API [1], and I noticed fsconfig(FSCONFIG_CMD_RECONFIGURE)
consistently fails on tmpfs with noswap option. This can be trivially
reproduced with the following:
```
int fs_fd = fsopen("tmpfs", 0);
fsconfig(fs_fd, FSCONFIG_SET_FLAG, "noswap", NULL, 0);
fsconfig(fs_fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0);
fsmount(fs_fd, 0, 0);
fsconfig(fs_fd, FSCONFIG_CMD_RECONFIGURE, NULL, NULL, 0); <------ EINVAL
```
After some digging the culprit is shmem_reconfigure() rejecting
!(ctx->seen & SHMEM_SEEN_NOSWAP) && sbinfo->noswap, which is bogus
as ctx->seen serves as a mask for whether certain options are touched
at all. On top of that, noswap option doesn't use fsparam_flag_no,
hence it's not really possible to "reenable" swap to begin with.
Drop the check and redundant SHMEM_SEEN_NOSWAP flag.
[1] https://github.com/systemd/systemd/pull/39637
Fixes: 2c6efe9cf2 ("shmem: add support to ignore swap")
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Link: https://patch.msgid.link/20251108190930.440685-1-me@yhndnzj.com
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4185bed73 upstream.
The "req.start" and "req.len" variables are u64 values that come from the
user at the start of the function. We mask away the high 32 bits of
"req.len" so that's capped at U32_MAX but the "req.start" variable can go
up to U64_MAX which means that the addition can still integer overflow.
Use check_add_overflow() to fix this bug.
Fixes: 095bb6e44e ("mtdchar: add MEMREAD ioctl")
Fixes: 6420ac0af9 ("mtdchar: prevent unbounded allocation in MEMWRITE ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c56bf214a upstream.
The DMA device pointer `dma_dev` was being dereferenced before ensuring
that `cdns_ctrl->dmac` is properly initialized.
Move the assignment of `dma_dev` after successfully acquiring the DMA
channel to ensure the pointer is valid before use.
Fixes: d76d22b509 ("mtd: rawnand: cadence: use dma_map_resource for sdma address")
Cc: stable@vger.kernel.org
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit baa18d577c upstream.
We've had reports from the field that some RK3588 Tiger have random
issues with eMMC errors.
Applying commit a28352cf2d ("mmc: sdhci-of-dwcmshc: Change
DLL_STRBIN_TAPNUM_DEFAULT to 0x4") didn't help and seemed to have made
things worse for our board.
Our HW department checked the eMMC lines and reported that they are too
long and don't look great so signal integrity is probably not the best.
Note that not all Tigers with the same eMMC chip have errors, so the
suspicion is that we're really on the edge in terms of signal integrity
and only a handful devices are failing. Additionally, we have RK3588
Jaguars with the same eMMC chip but the layout is different and we also
haven't received reports about those so far.
Lowering the max-frequency to 150MHz from 200MHz instead of simply
disabling HS400 was briefly tested and seem to work as well. We've
disabled HS400 downstream and haven't received reports since so we'll go
with that instead of lowering the max-frequency.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Fixes: 6173ef24b3 ("arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251112-tiger-hs200-v1-1-b50adac107c0@cherry.de
[added Fixes tag and stable-cc from 2nd mail]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08d70143e3 upstream.
In commit 296602b8e5 ("arm64: dts: rockchip: Move RK3399 OPPs to dtsi
files for SoC variants"), everything shared between variants of RK3399
was put into rk3399-base.dtsi and the rest in variant-specific DTSI,
such as rk3399-t, rk3399-op1, rk3399, etc.
Therefore, the variant-specific DTSI should include rk3399-base.dtsi and
not another variant's DTSI.
rk3399-op1 wrongly includes rk3399 (a variant) DTSI instead of
rk3399-base DTSI, let's fix this oversight by including the intended
DTSI.
Fortunately, this had no impact on the resulting DTB since all nodes
were named the same and all node properties were overridden in
rk3399-op1.dtsi. This was checked by doing a checksum of rk3399-op1 DTBs
before and after this commit.
No intended change in behavior.
Fixes: 296602b8e5 ("arm64: dts: rockchip: Move RK3399 OPPs to dtsi files for SoC variants")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://patch.msgid.link/20251029-rk3399-op1-include-v1-1-2472ee60e7f8@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit beab067dbc upstream.
Based on available evidence, the USB ID 4c4a:4155 used by multiple
devices has been attributed to Jieli. The commit 1a8953f4f7
("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY") affected touchscreen
functionality. Added checks for manufacturer and serial number to
maintain microphone compatibility, enabling both devices to function
properly.
[jkosina@suse.com: edit shortlog]
Fixes: 1a8953f4f7 ("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY")
Cc: stable@vger.kernel.org
Tested-by: staffan.melin@oscillator.se
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20739af073 upstream.
There is a race condition between timer_shutdown_sync() and timer
expiration that can lead to hitting a WARN_ON in expire_timers().
The issue occurs when timer_shutdown_sync() clears the timer function
to NULL while the timer is still running on another CPU. The race
scenario looks like this:
CPU0 CPU1
<SOFTIRQ>
lock_timer_base()
expire_timers()
base->running_timer = timer;
unlock_timer_base()
[call_timer_fn enter]
mod_timer()
...
timer_shutdown_sync()
lock_timer_base()
// For now, will not detach the timer but only clear its function to NULL
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
[call_timer_fn exit]
lock_timer_base()
base->running_timer = NULL;
unlock_timer_base()
...
// Now timer is pending while its function set to NULL.
// next timer trigger
<SOFTIRQ>
expire_timers()
WARN_ON_ONCE(!fn) // hit
...
lock_timer_base()
// Now timer will detach
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
if (shutdown)
timer->function = NULL;
unlock_timer_base()
The problem is that timer_shutdown_sync() clears the timer function
regardless of whether the timer is currently running. This can leave a
pending timer with a NULL function pointer, which triggers the
WARN_ON_ONCE(!fn) check in expire_timers().
Fix this by only clearing the timer function when actually detaching the
timer. If the timer is running, leave the function pointer intact, which is
safe because the timer will be properly detached when it finishes running.
Fixes: 0cc04e8045 ("timers: Add shutdown mechanism to the internal functions")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251122093942.301559-1-zouyipeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.