Merge remote-tracking branch 'stable/linux-4.9.y' into rpi-4.9.y

Created new i2c-rtc-gpio device overlay by combining i2c-rtc and i2c-gpio. Tested with PCF2127 on CM3.

Documentation/arm64/tagged-pointers.txt

@@ -11,24 +11,56 @@ in AArch64 Linux.
 The kernel configures the translation tables so that translations made
 via TTBR0 (i.e. userspace mappings) have the top byte (bits 63:56) of
 the virtual address ignored by the translation hardware. This frees up
-this byte for application use, with the following caveats:
+this byte for application use.
 
-	(1) The kernel requires that all user addresses passed to EL1
-	    are tagged with tag 0x00. This means that any syscall
-	    parameters containing user virtual addresses *must* have
-	    their top byte cleared before trapping to the kernel.
 
-	(2) Non-zero tags are not preserved when delivering signals.
+Passing tagged addresses to the kernel
-	    This means that signal handlers in applications making use
+--------------------------------------
-	    of tags cannot rely on the tag information for user virtual
-	    addresses being maintained for fields inside siginfo_t.
-	    One exception to this rule is for signals raised in response
-	    to watchpoint debug exceptions, where the tag information
-	    will be preserved.
 
-	(3) Special care should be taken when using tagged pointers,
+All interpretation of userspace memory addresses by the kernel assumes
-	    since it is likely that C compilers will not hazard two
+an address tag of 0x00.
-	    virtual addresses differing only in the upper byte.
+
+This includes, but is not limited to, addresses found in:
+
+ - pointer arguments to system calls, including pointers in structures
+   passed to system calls,
+
+ - the stack pointer (sp), e.g. when interpreting it to deliver a
+   signal,
+
+ - the frame pointer (x29) and frame records, e.g. when interpreting
+   them to generate a backtrace or call graph.
+
+Using non-zero address tags in any of these locations may result in an
+error code being returned, a (fatal) signal being raised, or other modes
+of failure.
+
+For these reasons, passing non-zero address tags to the kernel via
+system calls is forbidden, and using a non-zero address tag for sp is
+strongly discouraged.
+
+Programs maintaining a frame pointer and frame records that use non-zero
+address tags may suffer impaired or inaccurate debug and profiling
+visibility.
+
+
+Preserving tags
+---------------
+
+Non-zero tags are not preserved when delivering signals. This means that
+signal handlers in applications making use of tags cannot rely on the
+tag information for user virtual addresses being maintained for fields
+inside siginfo_t. One exception to this rule is for signals raised in
+response to watchpoint debug exceptions, where the tag information will
+be preserved.
 
 The architecture prevents the use of a tagged PC, so the upper byte will
 be set to a sign-extension of bit 55 on exception return.
+
+
+Other considerations
+--------------------
+
+Special care should be taken when using tagged pointers, since it is
+likely that C compilers will not hazard two virtual addresses differing
+only in the upper byte.

Documentation/kernel-parameters.txt

@@ -3932,6 +3932,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	spia_pedr=
 	spia_peddr=
 
+	stack_guard_gap=	[MM]
+			override the default stack gap protection. The value
+			is in page units and it defines how many pages prior
+			to (for stacks growing down) resp. after (for stacks
+			growing up) the main stack are reserved for no other
+			mapping. Default value is 256 pages.
+
 	stacktrace	[FTRACE]
 			Enabled the stack tracer on boot up.
 
@@ -4274,6 +4281,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	usbhid.mousepoll=
 			[USBHID] The interval which mice are to be polled at.
 
+	usbhid.jspoll=
+			[USBHID] The interval which joysticks are to be polled at.
+
 	usb-storage.delay_use=
 			[UMS] The delay in seconds before a new device is
 			scanned for Logical Units (default 1).

Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 9
-SUBLEVEL = 28
+SUBLEVEL = 35
 EXTRAVERSION =
 NAME = Roaring Lionus
 
@@ -651,6 +651,12 @@ KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \
 # Tell gcc to never replace conditional load with a non-conditional one
 KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)
 
+# check for 'asm goto'
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
+	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
+	KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
+endif
+
 include scripts/Makefile.gcc-plugins
 
 ifdef CONFIG_READABLE_ASM
@@ -796,12 +802,6 @@ KBUILD_CFLAGS   += $(call cc-option,-Werror=incompatible-pointer-types)
 # use the deterministic mode of AR if available
 KBUILD_ARFLAGS := $(call ar-option,D)
 
-# check for 'asm goto'
-ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
-	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
-	KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
-endif
-
 include scripts/Makefile.kasan
 include scripts/Makefile.extrawarn
 include scripts/Makefile.ubsan

arch/alpha/kernel/osf_sys.c

@@ -1188,8 +1188,10 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
 	if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
 		return -EFAULT;
 
-	err = 0;
+	err = put_user(status, ustatus);
-	err |= put_user(status, ustatus);
+	if (ret < 0)
+		return err ? err : ret;
+
 	err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
 	err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
 	err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);

arch/arc/kernel/head.S

@@ -71,14 +71,14 @@ ENTRY(stext)
 	GET_CPU_ID  r5
 	cmp	r5, 0
 	mov.nz	r0, r5
-#ifdef CONFIG_ARC_SMP_HALT_ON_RESET
+	bz	.Lmaster_proceed
-	; Non-Master can proceed as system would be booted sufficiently
+
-	jnz	first_lines_of_secondary
-#else
 	; Non-Masters wait for Master to boot enough and bring them up
-	jnz	arc_platform_smp_wait_to_boot
+	; when they resume, tail-call to entry point
-#endif
+	mov	blink, @first_lines_of_secondary
-	; Master falls thru
+	j	arc_platform_smp_wait_to_boot
+
+.Lmaster_proceed:
 #endif
 
 	; Clear BSS before updating any globals

arch/arc/kernel/smp.c

@@ -90,22 +90,37 @@ void __init smp_cpus_done(unsigned int max_cpus)
  */
 static volatile int wake_flag;
 
+#ifdef CONFIG_ISA_ARCOMPACT
+
+#define __boot_read(f)		f
+#define __boot_write(f, v)	f = v
+
+#else
+
+#define __boot_read(f)		arc_read_uncached_32(&f)
+#define __boot_write(f, v)	arc_write_uncached_32(&f, v)
+
+#endif
+
 static void arc_default_smp_cpu_kick(int cpu, unsigned long pc)
 {
 	BUG_ON(cpu == 0);
-	wake_flag = cpu;
+
+	__boot_write(wake_flag, cpu);
 }
 
 void arc_platform_smp_wait_to_boot(int cpu)
 {
-	while (wake_flag != cpu)
+	/* for halt-on-reset, we've waited already */
+	if (IS_ENABLED(CONFIG_ARC_SMP_HALT_ON_RESET))
+		return;
+
+	while (__boot_read(wake_flag) != cpu)
 		;
 
-	wake_flag = 0;
+	__boot_write(wake_flag, 0);
-	__asm__ __volatile__("j @first_lines_of_secondary	\n");
 }
 
-
 const char *arc_platform_smp_cpuinfo(void)
 {
 	return plat_smp_ops.info ? : "";

arch/arc/mm/mmap.c

@@ -64,7 +64,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 

arch/arm/boot/dts/at91-sama5d3_xplained.dts

@@ -162,9 +162,10 @@
 			};
 
 			adc0: adc@f8018000 {
+				atmel,adc-vref = <3300>;
+				atmel,adc-channels-used = <0xfe>;
 				pinctrl-0 = <
 					&pinctrl_adc0_adtrg
-					&pinctrl_adc0_ad0
 					&pinctrl_adc0_ad1
 					&pinctrl_adc0_ad2
 					&pinctrl_adc0_ad3
@@ -172,8 +173,6 @@
 					&pinctrl_adc0_ad5
 					&pinctrl_adc0_ad6
 					&pinctrl_adc0_ad7
-					&pinctrl_adc0_ad8
-					&pinctrl_adc0_ad9
 					>;
 				status = "okay";
 			};

arch/arm/boot/dts/imx6sx-sdb.dts

@@ -12,23 +12,6 @@
 	model = "Freescale i.MX6 SoloX SDB RevB Board";
 };
 
-&cpu0 {
-	operating-points = <
-		/* kHz    uV */
-		996000  1250000
-		792000  1175000
-		396000  1175000
-		198000  1175000
-		>;
-	fsl,soc-operating-points = <
-		/* ARM kHz      SOC uV */
-		996000	1250000
-		792000	1175000
-		396000	1175000
-		198000  1175000
-	>;
-};
-
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";

arch/arm/boot/dts/overlays/Makefile

@@ -8,6 +8,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	ads7846.dtbo \
 	akkordion-iqdacplus.dtbo \
 	allo-boss-dac-pcm512x-audio.dtbo \
+	allo-digione.dtbo \
 	allo-piano-dac-pcm512x-audio.dtbo \
 	allo-piano-dac-plus-pcm512x-audio.dtbo \
 	at86rf233.dtbo \
@@ -25,6 +26,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	enc28j60.dtbo \
 	enc28j60-spi2.dtbo \
 	fe-pi-audio.dtbo \
+	goodix.dtbo \
 	googlevoicehat-soundcard.dtbo \
 	gpio-ir.dtbo \
 	gpio-poweroff.dtbo \
@@ -40,6 +42,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	i2c-mux.dtbo \
 	i2c-pwm-pca9685a.dtbo \
 	i2c-rtc.dtbo \
+	i2c-rtc-gpio.dtbo \
 	i2c-sensor.dtbo \
 	i2c0-bcm2708.dtbo \
 	i2c1-bcm2708.dtbo \
@@ -56,7 +59,9 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	mcp2515-can1.dtbo \
 	mcp3008.dtbo \
 	midi-uart0.dtbo \
+	midi-uart1.dtbo \
 	mmc.dtbo \
+	mpu6050.dtbo \
 	mz61581.dtbo \
 	pi3-act-led.dtbo \
 	pi3-disable-bt.dtbo \
@@ -74,6 +79,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	pwm-2chan.dtbo \
 	qca7000.dtbo \
 	raspidac3.dtbo \
+	rotary-encoder.dtbo \
 	rpi-backlight.dtbo \
 	rpi-cirrus-wm5102.dtbo \
 	rpi-dac.dtbo \

arch/arm/boot/dts/overlays/README

@@ -287,6 +287,12 @@ Params: 24db_digital_gain       Allow gain to be applied via the PCM512x codec
                                 slave"
 
 
+Name:   allo-digione
+Info:   Configures the Allo Digione audio card
+Load:   dtoverlay=allo-digione
+Params: <None>
+
+
 Name:   allo-piano-dac-pcm512x-audio
 Info:   Configures the Allo Piano DAC (2.0/2.1) audio cards.
         (NB. This initial support is for 2.0 channel audio ONLY! ie. stereo.
@@ -459,6 +465,14 @@ Load:   dtoverlay=fe-pi-audio
 Params: <None>
 
 
+Name:   goodix
+Info:   Enables I2C connected Goodix gt9271 multiple touch controller using
+        GPIOs 4 and 17 (pins 7 and 11 on GPIO header) for interrupt and reset.
+Load:   dtoverlay=goodix,<param>=<val>
+Params: interrupt               GPIO used for interrupt (default 4)
+        reset                   GPIO used for reset (default 17)
+
+
 Name:   googlevoicehat-soundcard
 Info:   Configures the Google voiceHAT soundcard
 Load:   dtoverlay=googlevoicehat-soundcard
@@ -648,12 +662,53 @@ Params: abx80x                  Select one of the ABx80x family:
                                 source
 
 
+Name:   i2c-rtc-gpio
+Info:   Adds support for a number of I2C Real Time Clock devices
+        using the software i2c controller
+Load:   dtoverlay=i2c-rtc-gpio,<param>=<val>
+Params: abx80x                  Select one of the ABx80x family:
+                                  AB0801, AB0803, AB0804, AB0805,
+                                  AB1801, AB1803, AB1804, AB1805
+
+        ds1307                  Select the DS1307 device
+
+        ds1339                  Select the DS1339 device
+
+        ds3231                  Select the DS3231 device
+
+        mcp7940x                Select the MCP7940x device
+
+        mcp7941x                Select the MCP7941x device
+
+        pcf2127                 Select the PCF2127 device
+
+        pcf8523                 Select the PCF8523 device
+
+        pcf8563                 Select the PCF8563 device
+
+        trickle-diode-type      Diode type for trickle charge - "standard" or
+                                "schottky" (ABx80x only)
+
+        trickle-resistor-ohms   Resistor value for trickle charge (DS1339,
+                                ABx80x)
+
+        wakeup-source           Specify that the RTC can be used as a wakeup
+                                source
+
+        i2c_gpio_sda            GPIO used for I2C data (default "23")
+
+        i2c_gpio_scl            GPIO used for I2C clock (default "24")
+
+        i2c_gpio_delay_us       Clock delay in microseconds
+                                (default "2" = ~100kHz)
+
+
 Name:   i2c-sensor
 Info:   Adds support for a number of I2C barometric pressure and temperature
         sensors on i2c_arm
 Load:   dtoverlay=i2c-sensor,<param>=<val>
-Params: addr                    Set the address for the BME280, BMP280 or
+Params: addr                    Set the address for the BME280, BMP280, TMP102
-                                TMP102
+                                or LM75
 
         bme280                  Select the Bosch Sensortronic BME280
                                 Valid addresses 0x76-0x77, default 0x76
@@ -665,10 +720,12 @@ Params: addr                    Set the address for the BME280, BMP280 or
         bmp280                  Select the Bosch Sensortronic BMP280
                                 Valid addresses 0x76-0x77, default 0x76
 
-        lm75                    Select the Maxim LM75 temperature sensor
+        htu21                   Select the HTU21 temperature and humidity sensor
 
-        lm75addr                Choose the address for the LM75 (0x48-0x4f -
+        lm75                    Select the Maxim LM75 temperature sensor
-                                default 0x4f)
+                                Valid addresses 0x48-0x4f, default 0x4f
+
+        lm75addr                Deprecated - use addr parameter instead
 
         si7020                  Select the Silicon Labs Si7013/20/21 humidity/
                                 temperature sensor
@@ -876,6 +933,13 @@ Load:   dtoverlay=midi-uart0
 Params: <None>
 
 
+Name:   midi-uart1
+Info:   Configures UART1 (ttyS0) so that a requested 38.4kbaud actually gets
+        31.25kbaud, the frequency required for MIDI
+Load:   dtoverlay=midi-uart1
+Params: <None>
+
+
 Name:   mmc
 Info:   Selects the bcm2835-mmc SD/MMC driver, optionally with overclock
 Load:   dtoverlay=mmc,<param>=<val>
@@ -883,6 +947,12 @@ Params: overclock_50            Clock (in MHz) to use when the MMC framework
                                 requests 50MHz
 
 
+Name:   mpu6050
+Info:   Overlay for i2c connected mpu6050 imu
+Load:   dtoverlay=mpu6050,<param>=<val>
+Params: interrupt               GPIO pin for interrupt (default 4)
+
+
 Name:   mz61581
 Info:   MZ61581 display by Tontec
 Load:   dtoverlay=mz61581,<param>=<val>
@@ -1107,6 +1177,15 @@ Load:   dtoverlay=raspidac3
 Params: <None>
 
 
+Name:   rotary-encoder
+Info:   Overlay for GPIO connected rotary encoder.
+Load:   dtoverlay=rotary-encoder,<param>=<val>
+Params: rotary0_pin_a           GPIO connected to rotary encoder channel A
+                                (default 4).
+        rotary0_pin_b           GPIO connected to rotary encoder channel B
+                                (default 17).
+
+
 Name:   rpi-backlight
 Info:   Raspberry Pi official display backlight driver
 Load:   dtoverlay=rpi-backlight
@@ -1208,19 +1287,9 @@ Name:   sdio
 Info:   Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock,
         and enables SDIO via GPIOs 22-27.
 Load:   dtoverlay=sdio,<param>=<val>
-Params: overclock_50            SD Clock (in MHz) to use when the MMC framework
+Params: sdio_overclock          SDIO Clock (in MHz) to use when the MMC
-                                requests 50MHz
-
-        sdio_overclock          SDIO Clock (in MHz) to use when the MMC
                                 framework requests 50MHz
 
-        force_pio               Disable DMA support (default off)
-
-        pio_limit               Number of blocks above which to use DMA
-                                (default 1)
-
-        debug                   Enable debug output (default off)
-
         poll_once               Disable SDIO-device polling every second
                                 (default on: polling once at boot-time)
 
@@ -1231,19 +1300,9 @@ Name:   sdio-1bit
 Info:   Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock,
         and enables 1-bit SDIO via GPIOs 22-25.
 Load:   dtoverlay=sdio-1bit,<param>=<val>
-Params: overclock_50            SD Clock (in MHz) to use when the MMC framework
+Params: sdio_overclock          SDIO Clock (in MHz) to use when the MMC
-                                requests 50MHz
-
-        sdio_overclock          SDIO Clock (in MHz) to use when the MMC
                                 framework requests 50MHz
 
-        force_pio               Disable DMA support (default off)
-
-        pio_limit               Number of blocks above which to use DMA
-                                (default 1)
-
-        debug                   Enable debug output (default off)
-
         poll_once               Disable SDIO-device polling every second
                                 (default on: polling once at boot-time)
 

arch/arm/boot/dts/overlays/allo-digione-overlay.dts

@@ -0,0 +1,44 @@
+// Definitions for Allo DigiOne
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2708";
+
+	fragment@0 {
+		target = <&i2s>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			wm8804@3b {
+				#sound-dai-cells = <0>;
+				compatible = "wlf,wm8804";
+				reg = <0x3b>;
+				PVDD-supply = <&vdd_3v3_reg>;
+				DVDD-supply = <&vdd_3v3_reg>;
+				status = "okay";
+				wlf,reset-gpio = <&gpio 17 0>;
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&sound>;
+		__overlay__ {
+			compatible = "allo,allo-digione";
+			i2s-controller = <&i2s>;
+			status = "okay";
+			clock44-gpio = <&gpio 5 0>;
+			clock48-gpio = <&gpio 6 0>;
+		};
+	};
+};

arch/arm/boot/dts/overlays/goodix-overlay.dts

@@ -0,0 +1,46 @@
+// Device tree overlay for I2C connected Goodix gt9271 multiple touch controller
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2708";
+
+	fragment@0 {
+		target = <&gpio>;
+		__overlay__ {
+			goodix_pins: goodix_pins {
+				brcm,pins = <4 17>; // interrupt and reset
+				brcm,function = <0 0>; // in
+				brcm,pull = <2 2>; // pull-up
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			gt9271: gt9271@14 {
+				compatible = "goodix,gt9271";
+				reg = <0x14>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&goodix_pins>;
+				interrupt-parent = <&gpio>;
+				interrupts = <4 2>; // high-to-low edge triggered
+				irq-gpios = <&gpio 4 0>; // Pin7 on GPIO header
+				reset-gpios = <&gpio 17 0>; // Pin11 on GPIO header
+			};
+		};
+	};
+
+	__overrides__ {
+		interrupt = <&goodix_pins>,"brcm,pins:0",
+			<&gt9271>,"interrupts:0",
+			<&gt9271>,"irq-gpios:4";
+		reset = <&goodix_pins>,"brcm,pins:4",
+			<&gt9271>,"reset-gpios:4";
+	};
+};

arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts

@@ -0,0 +1,183 @@
+// Definitions for several I2C based Real Time Clocks
+// Available through i2c-gpio
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2708";
+
+	fragment@0 {
+		target-path = "/";
+		__overlay__ {
+			i2c_gpio: i2c-gpio-rtc@0 {
+				compatible = "i2c-gpio";
+				gpios = <&gpio 23 0 /* sda */
+					 &gpio 24 0 /* scl */
+					>;
+				i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c_gpio>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			abx80x: abx80x@69 {
+				compatible = "abracon,abx80x";
+				reg = <0x69>;
+				abracon,tc-diode = "standard";
+				abracon,tc-resistor = <0>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c_gpio>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			ds1307: ds1307@68 {
+				compatible = "maxim,ds1307";
+				reg = <0x68>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@3 {
+		target = <&i2c_gpio>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			ds1339: ds1339@68 {
+				compatible = "dallas,ds1339";
+				trickle-resistor-ohms = <0>;
+				reg = <0x68>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&i2c_gpio>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			ds3231: ds3231@68 {
+				compatible = "maxim,ds3231";
+				reg = <0x68>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@5 {
+		target = <&i2c_gpio>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			mcp7940x: mcp7940x@6f {
+				compatible = "microchip,mcp7940x";
+				reg = <0x6f>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@6 {
+		target = <&i2c_gpio>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			mcp7941x: mcp7941x@6f {
+				compatible = "microchip,mcp7941x";
+				reg = <0x6f>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@7 {
+		target = <&i2c_gpio>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			pcf2127: pcf2127@51 {
+				compatible = "nxp,pcf2127";
+				reg = <0x51>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@8 {
+		target = <&i2c_gpio>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			pcf8523: pcf8523@68 {
+				compatible = "nxp,pcf8523";
+				reg = <0x68>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@9 {
+		target = <&i2c_gpio>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			pcf8563: pcf8563@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+				status = "okay";
+			};
+		};
+	};
+
+	__overrides__ {
+		abx80x = <0>,"+1";
+		ds1307 = <0>,"+2";
+		ds1339 = <0>,"+3";
+		ds3231 = <0>,"+4";
+		mcp7940x = <0>,"+5";
+		mcp7941x = <0>,"+6";
+		pcf2127 = <0>,"+7";
+		pcf8523 = <0>,"+8";
+		pcf8563 = <0>,"+9";
+		trickle-diode-type = <&abx80x>,"abracon,tc-diode";
+		trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0",
+					<&abx80x>,"abracon,tc-resistor";
+		wakeup-source = <&ds1339>,"wakeup-source?",
+				<&ds3231>,"wakeup-source?",
+				<&mcp7940x>,"wakeup-source?",
+					<&mcp7941x>,"wakeup-source?";
+		i2c_gpio_sda = <&i2c_gpio>,"gpios:4";
+		i2c_gpio_scl = <&i2c_gpio>,"gpios:16";
+		i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0";
+	};
+};

arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts

@@ -7,7 +7,7 @@
 
 	fragment@0 {
 		target = <&i2c_arm>;
-		__overlay__ {
+		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "okay";
@@ -17,61 +17,142 @@
 				reg = <0x69>;
 				abracon,tc-diode = "standard";
 				abracon,tc-resistor = <0>;
-				status = "disable";
+				status = "okay";
 			};
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
 			ds1307: ds1307@68 {
 				compatible = "maxim,ds1307";
 				reg = <0x68>;
-				status = "disable";
+				status = "okay";
 			};
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
 			ds1339: ds1339@68 {
 				compatible = "dallas,ds1339";
 				trickle-resistor-ohms = <0>;
 				reg = <0x68>;
-				status = "disable";
+				status = "okay";
 			};
-			mcp7940x: mcp7940x@6f {
-				compatible = "microchip,mcp7940x";
-				reg = <0x6f>;
-				status = "disable";
 		};
-			mcp7941x: mcp7941x@6f {
-				compatible = "microchip,mcp7941x";
-				reg = <0x6f>;
-				status = "disable";
 	};
+
+	fragment@3 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
 			ds3231: ds3231@68 {
 				compatible = "maxim,ds3231";
 				reg = <0x68>;
-				status = "disable";
+				status = "okay";
 			};
+		};
+	};
+
+	fragment@4 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			mcp7940x: mcp7940x@6f {
+				compatible = "microchip,mcp7940x";
+				reg = <0x6f>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@5 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			mcp7941x: mcp7941x@6f {
+				compatible = "microchip,mcp7941x";
+				reg = <0x6f>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@6 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
 			pcf2127: pcf2127@51 {
 				compatible = "nxp,pcf2127";
 				reg = <0x51>;
-				status = "disable";
+				status = "okay";
 			};
+		};
+	};
+
+	fragment@7 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
 			pcf8523: pcf8523@68 {
 				compatible = "nxp,pcf8523";
 				reg = <0x68>;
-				status = "disable";
+				status = "okay";
 			};
+		};
+	};
+
+	fragment@8 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
 			pcf8563: pcf8563@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
-				status = "disable";
+				status = "okay";
 			};
 		};
 	};
+
 	__overrides__ {
-		abx80x = <&abx80x>,"status";
+		abx80x = <0>,"+0";
-		ds1307 = <&ds1307>,"status";
+		ds1307 = <0>,"+1";
-		ds1339 = <&ds1339>,"status";
+		ds1339 = <0>,"+2";
-		ds3231 = <&ds3231>,"status";
+		ds3231 = <0>,"+3";
-		mcp7940x = <&mcp7940x>,"status";
+		mcp7940x = <0>,"+4";
-		mcp7941x = <&mcp7941x>,"status";
+		mcp7941x = <0>,"+5";
-		pcf2127 = <&pcf2127>,"status";
+		pcf2127 = <0>,"+6";
-		pcf8523 = <&pcf8523>,"status";
+		pcf8523 = <0>,"+7";
-		pcf8563 = <&pcf8563>,"status";
+		pcf8563 = <0>,"+8";
 		trickle-diode-type = <&abx80x>,"abracon,tc-diode";
 		trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0",
 					<&abx80x>,"abracon,tc-resistor";

arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts

@@ -7,7 +7,7 @@
 
 	fragment@0 {
 		target = <&i2c_arm>;
-		__overlay__ {
+		__dormant__ {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "okay";
@@ -15,57 +15,128 @@
 			bme280: bme280@76 {
 				compatible = "bosch,bme280";
 				reg = <0x76>;
-				status = "disable";
+				status = "okay";
 			};
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
 
 			bmp085: bmp085@77 {
 				compatible = "bosch,bmp085";
 				reg = <0x77>;
 				default-oversampling = <3>;
-				status = "disable";
+				status = "okay";
 			};
+		};
+	};
+
+	fragment@2 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
 
 			bmp180: bmp180@77 {
 				compatible = "bosch,bmp180";
 				reg = <0x77>;
-				status = "disable";
+				status = "okay";
 			};
+		};
+	};
+
+	fragment@3 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
 
 			bmp280: bmp280@76 {
 				compatible = "bosch,bmp280";
 				reg = <0x76>;
-				status = "disable";
+				status = "okay";
 			};
+		};
+	};
+
+	fragment@4 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			htu21: htu21@40 {
+				compatible = "htu21";
+				reg = <0x40>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@5 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
 
 			lm75: lm75@4f {
 				compatible = "lm75";
 				reg = <0x4f>;
-				status = "disable";
+				status = "okay";
 			};
+		};
+	};
+
+	fragment@6 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
 
 			si7020: si7020@40 {
 				compatible = "si7020";
 				reg = <0x40>;
-				status = "disable";
+				status = "okay";
 			};
+		};
+	};
+
+	fragment@7 {
+		target = <&i2c_arm>;
+		__dormant__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
 
 			tmp102: tmp102@48 {
 				compatible = "ti,tmp102";
 				reg = <0x48>;
-				status = "disable";
+				status = "okay";
 			};
 		};
 	};
 
 	__overrides__ {
-		addr =  <&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0";
+		addr =  <&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0",
-		bme280 = <&bme280>,"status";
+			<&lm75>,"reg:0";
-		bmp085 = <&bmp085>,"status";
+		bme280 = <0>,"+0";
-		bmp180 = <&bmp180>,"status";
+		bmp085 = <0>,"+1";
-		bmp280 = <&bmp280>,"status";
+		bmp180 = <0>,"+2";
-		lm75 = <&lm75>,"status";
+		bmp280 = <0>,"+3";
+		htu21 = <0>,"+4";
+		lm75 = <0>,"+5";
 		lm75addr = <&lm75>,"reg:0";
-		si7020 = <&si7020>,"status";
+		si7020 = <0>,"+6";
-		tmp102 = <&tmp102>,"status";
+		tmp102 = <0>,"+7";
 	};
 };

arch/arm/boot/dts/overlays/midi-uart1-overlay.dts

@@ -0,0 +1,43 @@
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/bcm2835-aux.h>
+
+/*
+ * Fake a higher clock rate to get a larger divisor, and thereby a lower
+ * baudrate. The real clock is 48MHz, which we scale so that requesting
+ * 38.4kHz results in an actual 31.25kHz.
+ *
+ *   48000000*38400/31250 = 58982400
+ */
+
+/{
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target-path = "/clocks";
+		__overlay__ {
+			midi_clk: clock@5 {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+				clock-mult = <38400>;
+				clock-div  = <31250>;
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&uart1>;
+		__overlay__ {
+			clocks = <&midi_clk>;
+		};
+	};
+
+	fragment@2 {
+		target = <&aux>;
+		__overlay__ {
+			clock-output-names = "aux_uart", "aux_spi1", "aux_spi2";
+		};
+	};
+};

arch/arm/boot/dts/overlays/mpu6050-overlay.dts

@@ -0,0 +1,28 @@
+// Definitions for MPU6050
+/dts-v1/;
+/plugin/;
+
+/ {
+        compatible = "brcm,bcm2708";
+
+        fragment@0 {
+                target = <&i2c1>;
+                __overlay__ {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        status = "okay";
+                        clock-frequency = <400000>;
+
+                        mpu6050: mpu6050@68 {
+                                compatible = "invensense,mpu6050";
+                                reg = <0x68>;
+                                interrupt-parent = <&gpio>;
+                                interrupts = <4 1>;
+                        };
+                };
+        };
+
+        __overrides__ {
+                interrupt = <&mpu6050>,"interrupts:0";
+        };
+};

arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts

@@ -0,0 +1,43 @@
+// Device tree overlay for GPIO connected rotary encoder.
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2708";
+
+	fragment@0 {
+		target = <&gpio>;
+		__overlay__ {
+			rotary0_pins: rotary0_pins {
+				brcm,pins = <4 17>; /* gpio 4 17 */
+				brcm,function = <0 0>; /* input */
+				brcm,pull = <2 2>; /* pull-up */
+			};
+
+		};
+	};
+
+	fragment@1 {
+		target-path = "/";
+		__overlay__ {
+			rotary0: rotary@0 {
+					compatible = "rotary-encoder";
+					status = "okay";
+					pinctrl-names = "default";
+					pinctrl-0 = <&rotary0_pins>;
+					gpios = <&gpio 4 0>, <&gpio 17 0>;
+					linux,axis = <0>; /* REL_X */
+					rotary-encoder,encoding = "gray";
+					rotary-encoder,relative-axis;
+			};
+		};
+
+	};  
+
+	__overrides__ {
+		rotary0_pin_a = <&rotary0>,"gpios:4",
+				<&rotary0_pins>,"brcm,pins:0";
+		rotary0_pin_b = <&rotary0>,"gpios:16",
+				<&rotary0_pins>,"brcm,pins:4";
+	};  
+};

arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts

@@ -11,35 +11,35 @@
 	fragment@0 {
 		target-path = "/chosen";
 		__overlay__ {
-			bootargs = "cma=256M@256M";
+			bootargs = "cma=256M";
 		};
 	};
 
 	fragment@1 {
 		target-path = "/chosen";
 		__dormant__ {
-			bootargs = "cma=192M@256M";
+			bootargs = "cma=192M";
 		};
 	};
 
 	fragment@2 {
 		target-path = "/chosen";
 		__dormant__ {
-			bootargs = "cma=128M@128M";
+			bootargs = "cma=128M";
 		};
 	};
 
 	fragment@3 {
 		target-path = "/chosen";
 		__dormant__ {
-			bootargs = "cma=96M@128M";
+			bootargs = "cma=96M";
 		};
 	};
 
 	fragment@4 {
 		target-path = "/chosen";
 		__dormant__ {
-			bootargs = "cma=64M@64M";
+			bootargs = "cma=64M";
 		};
 	};
 

arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts

@@ -13,35 +13,35 @@
 	fragment@0 {
 		target-path = "/chosen";
 		__overlay__ {
-			bootargs = "cma=256M@256M";
+			bootargs = "cma=256M";
 		};
 	};
 
 	fragment@1 {
 		target-path = "/chosen";
 		__dormant__ {
-			bootargs = "cma=192M@256M";
+			bootargs = "cma=192M";
 		};
 	};
 
 	fragment@2 {
 		target-path = "/chosen";
 		__dormant__ {
-			bootargs = "cma=128M@128M";
+			bootargs = "cma=128M";
 		};
 	};
 
 	fragment@3 {
 		target-path = "/chosen";
 		__dormant__ {
-			bootargs = "cma=96M@128M";
+			bootargs = "cma=96M";
 		};
 	};
 
 	fragment@4 {
 		target-path = "/chosen";
 		__dormant__ {
-			bootargs = "cma=64M@64M";
+			bootargs = "cma=64M";
 		};
 	};
 

arch/arm/boot/dts/tegra20-paz00.dts

@@ -569,6 +569,7 @@
 			regulator-name = "+3VS,vdd_pnl";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
 			gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};

arch/arm/configs/bcm2709_defconfig

@@ -103,9 +103,11 @@ CONFIG_TCP_CONG_ADVANCED=y
 CONFIG_TCP_CONG_BBR=m
 CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_SIT_6RD=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
@@ -363,6 +365,7 @@ CONFIG_CAN=m
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_SLCAN=m
 CONFIG_CAN_MCP251X=m
+CONFIG_CAN_GS_USB=m
 CONFIG_IRDA=m
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
@@ -438,7 +441,6 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_MD=y
 CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
@@ -569,7 +571,8 @@ CONFIG_JOYSTICK_RPISENSE=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
 CONFIG_TOUCHSCREEN_EGALAX=m
-CONFIG_TOUCHSCREEN_EKTF2127=m
+CONFIG_TOUCHSCREEN_GOODIX=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_TOUCHSCREEN_RPI_FT5406=m
 CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
 CONFIG_TOUCHSCREEN_STMPE=m
@@ -618,6 +621,7 @@ CONFIG_I2C_MUX_PCA954x=m
 CONFIG_I2C_BCM2708=m
 CONFIG_I2C_BCM2835=m
 CONFIG_I2C_GPIO=m
+CONFIG_I2C_ROBOTFUZZ_OSIF=m
 CONFIG_SPI=y
 CONFIG_SPI_BCM2835=m
 CONFIG_SPI_BCM2835AUX=m
@@ -653,6 +657,7 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_BATTERY_DS2760=m
 CONFIG_HWMON=m
+CONFIG_SENSORS_JC42=m
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_SHT21=m
 CONFIG_SENSORS_SHTC1=m
@@ -899,6 +904,7 @@ CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m
 CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC_PLUS=m
 CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m
 CONFIG_SND_BCM2708_SOC_ALLO_BOSS_DAC=m
+CONFIG_SND_BCM2708_SOC_ALLO_DIGIONE=m
 CONFIG_SND_PISOUND=m
 CONFIG_SND_SOC_ADAU1701=m
 CONFIG_SND_SOC_ADAU7002=m
@@ -1154,6 +1160,7 @@ CONFIG_FB_TFT_SSD1306=m
 CONFIG_FB_TFT_SSD1331=m
 CONFIG_FB_TFT_SSD1351=m
 CONFIG_FB_TFT_ST7735R=m
+CONFIG_FB_TFT_ST7789V=m
 CONFIG_FB_TFT_TINYLCD=m
 CONFIG_FB_TFT_TLS8204=m
 CONFIG_FB_TFT_UC1701=m
@@ -1168,13 +1175,12 @@ CONFIG_RASPBERRYPI_POWER=y
 CONFIG_EXTCON=m
 CONFIG_EXTCON_ARIZONA=m
 CONFIG_IIO=m
-CONFIG_IIO_BUFFER=y
 CONFIG_IIO_BUFFER_CB=m
-CONFIG_IIO_KFIFO_BUF=m
 CONFIG_MCP320X=m
 CONFIG_MCP3422=m
 CONFIG_DHT11=m
 CONFIG_HTU21=m
+CONFIG_INV_MPU6050_I2C=m
 CONFIG_BMP280=m
 CONFIG_PWM_BCM2835=m
 CONFIG_PWM_PCA9685=m

arch/arm/configs/bcmrpi_defconfig

@@ -99,9 +99,11 @@ CONFIG_TCP_CONG_ADVANCED=y
 CONFIG_TCP_CONG_BBR=m
 CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_SIT_6RD=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
@@ -359,6 +361,7 @@ CONFIG_CAN=m
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_SLCAN=m
 CONFIG_CAN_MCP251X=m
+CONFIG_CAN_GS_USB=m
 CONFIG_IRDA=m
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
@@ -434,7 +437,6 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
 CONFIG_MD=y
 CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
@@ -565,6 +567,8 @@ CONFIG_JOYSTICK_RPISENSE=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
 CONFIG_TOUCHSCREEN_EGALAX=m
+CONFIG_TOUCHSCREEN_GOODIX=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_TOUCHSCREEN_RPI_FT5406=m
 CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
 CONFIG_TOUCHSCREEN_STMPE=m
@@ -613,6 +617,7 @@ CONFIG_I2C_MUX_PCA954x=m
 CONFIG_I2C_BCM2708=m
 CONFIG_I2C_BCM2835=m
 CONFIG_I2C_GPIO=m
+CONFIG_I2C_ROBOTFUZZ_OSIF=m
 CONFIG_SPI=y
 CONFIG_SPI_BCM2835=m
 CONFIG_SPI_BCM2835AUX=m
@@ -646,6 +651,7 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_BATTERY_DS2760=m
 CONFIG_HWMON=m
+CONFIG_SENSORS_JC42=m
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_SHT21=m
 CONFIG_SENSORS_SHTC1=m
@@ -892,6 +898,7 @@ CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m
 CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC_PLUS=m
 CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m
 CONFIG_SND_BCM2708_SOC_ALLO_BOSS_DAC=m
+CONFIG_SND_BCM2708_SOC_ALLO_DIGIONE=m
 CONFIG_SND_PISOUND=m
 CONFIG_SND_SOC_ADAU1701=m
 CONFIG_SND_SOC_ADAU7002=m
@@ -1162,6 +1169,7 @@ CONFIG_FB_TFT_SSD1306=m
 CONFIG_FB_TFT_SSD1331=m
 CONFIG_FB_TFT_SSD1351=m
 CONFIG_FB_TFT_ST7735R=m
+CONFIG_FB_TFT_ST7789V=m
 CONFIG_FB_TFT_TINYLCD=m
 CONFIG_FB_TFT_TLS8204=m
 CONFIG_FB_TFT_UC1701=m
@@ -1176,13 +1184,12 @@ CONFIG_RASPBERRYPI_POWER=y
 CONFIG_EXTCON=m
 CONFIG_EXTCON_ARIZONA=m
 CONFIG_IIO=m
-CONFIG_IIO_BUFFER=y
 CONFIG_IIO_BUFFER_CB=m
-CONFIG_IIO_KFIFO_BUF=m
 CONFIG_MCP320X=m
 CONFIG_MCP3422=m
 CONFIG_DHT11=m
 CONFIG_HTU21=m
+CONFIG_INV_MPU6050_I2C=m
 CONFIG_BMP280=m
 CONFIG_PWM_BCM2835=m
 CONFIG_PWM_PCA9685=m

arch/arm/configs/ezx_defconfig

@@ -64,8 +64,8 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/arm/configs/imote2_defconfig

@@ -56,8 +56,8 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/arm/include/asm/kvm_coproc.h

@@ -31,7 +31,8 @@ void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table);
 int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int kvm_handle_cp_0_13_access(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run);
-int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run);
 int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run);
 

arch/arm/include/asm/module.h

@@ -18,13 +18,18 @@ enum {
 };
 #endif
 
+struct mod_plt_sec {
+	struct elf32_shdr	*plt;
+	int			plt_count;
+};
+
 struct mod_arch_specific {
 #ifdef CONFIG_ARM_UNWIND
 	struct unwind_table *unwind[ARM_SEC_MAX];
 #endif
 #ifdef CONFIG_ARM_MODULE_PLTS
-	struct elf32_shdr   *plt;
+	struct mod_plt_sec	core;
-	int		    plt_count;
+	struct mod_plt_sec	init;
 #endif
 };
 

arch/arm/kernel/module-plts.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 2014-2017 Linaro Ltd. <ard.biesheuvel@linaro.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -31,9 +31,17 @@ struct plt_entries {
 	u32	lit[PLT_ENT_COUNT];
 };
 
+static bool in_init(const struct module *mod, unsigned long loc)
+{
+	return loc - (u32)mod->init_layout.base < mod->init_layout.size;
+}
+
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
 {
-	struct plt_entries *plt = (struct plt_entries *)mod->arch.plt->sh_addr;
+	struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core :
+							  &mod->arch.init;
+
+	struct plt_entries *plt = (struct plt_entries *)pltsec->plt->sh_addr;
 	int idx = 0;
 
 	/*
@@ -41,9 +49,9 @@ u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
 	 * relocations are sorted, this will be the last entry we allocated.
 	 * (if one exists).
 	 */
-	if (mod->arch.plt_count > 0) {
+	if (pltsec->plt_count > 0) {
-		plt += (mod->arch.plt_count - 1) / PLT_ENT_COUNT;
+		plt += (pltsec->plt_count - 1) / PLT_ENT_COUNT;
-		idx = (mod->arch.plt_count - 1) % PLT_ENT_COUNT;
+		idx = (pltsec->plt_count - 1) % PLT_ENT_COUNT;
 
 		if (plt->lit[idx] == val)
 			return (u32)&plt->ldr[idx];
@@ -53,8 +61,8 @@ u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
 			plt++;
 	}
 
-	mod->arch.plt_count++;
+	pltsec->plt_count++;
-	BUG_ON(mod->arch.plt_count * PLT_ENT_SIZE > mod->arch.plt->sh_size);
+	BUG_ON(pltsec->plt_count * PLT_ENT_SIZE > pltsec->plt->sh_size);
 
 	if (!idx)
 		/* Populate a new set of entries */
@@ -129,7 +137,7 @@ static bool duplicate_rel(Elf32_Addr base, const Elf32_Rel *rel, int num)
 
 /* Count how many PLT entries we may need */
 static unsigned int count_plts(const Elf32_Sym *syms, Elf32_Addr base,
-			       const Elf32_Rel *rel, int num)
+			       const Elf32_Rel *rel, int num, Elf32_Word dstidx)
 {
 	unsigned int ret = 0;
 	const Elf32_Sym *s;
@@ -144,13 +152,17 @@ static unsigned int count_plts(const Elf32_Sym *syms, Elf32_Addr base,
 		case R_ARM_THM_JUMP24:
 			/*
 			 * We only have to consider branch targets that resolve
-			 * to undefined symbols. This is not simply a heuristic,
+			 * to symbols that are defined in a different section.
-			 * it is a fundamental limitation, since the PLT itself
+			 * This is not simply a heuristic, it is a fundamental
-			 * is part of the module, and needs to be within range
+			 * limitation, since there is no guaranteed way to emit
-			 * as well, so modules can never grow beyond that limit.
+			 * PLT entries sufficiently close to the branch if the
+			 * section size exceeds the range of a branch
+			 * instruction. So ignore relocations against defined
+			 * symbols if they live in the same section as the
+			 * relocation target.
 			 */
 			s = syms + ELF32_R_SYM(rel[i].r_info);
-			if (s->st_shndx != SHN_UNDEF)
+			if (s->st_shndx == dstidx)
 				break;
 
 			/*
@@ -161,7 +173,12 @@ static unsigned int count_plts(const Elf32_Sym *syms, Elf32_Addr base,
 			 * So we need to support them, but there is no need to
 			 * take them into consideration when trying to optimize
 			 * this code. So let's only check for duplicates when
-			 * the addend is zero.
+			 * the addend is zero. (Note that calls into the core
+			 * module via init PLT entries could involve section
+			 * relative symbol references with non-zero addends, for
+			 * which we may end up emitting duplicates, but the init
+			 * PLT is released along with the rest of the .init
+			 * region as soon as module loading completes.)
 			 */
 			if (!is_zero_addend_relocation(base, rel + i) ||
 			    !duplicate_rel(base, rel, i))
@@ -174,7 +191,8 @@ static unsigned int count_plts(const Elf32_Sym *syms, Elf32_Addr base,
 int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 			      char *secstrings, struct module *mod)
 {
-	unsigned long plts = 0;
+	unsigned long core_plts = 0;
+	unsigned long init_plts = 0;
 	Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum;
 	Elf32_Sym *syms = NULL;
 
@@ -184,13 +202,15 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 	 */
 	for (s = sechdrs; s < sechdrs_end; ++s) {
 		if (strcmp(".plt", secstrings + s->sh_name) == 0)
-			mod->arch.plt = s;
+			mod->arch.core.plt = s;
+		else if (strcmp(".init.plt", secstrings + s->sh_name) == 0)
+			mod->arch.init.plt = s;
 		else if (s->sh_type == SHT_SYMTAB)
 			syms = (Elf32_Sym *)s->sh_addr;
 	}
 
-	if (!mod->arch.plt) {
+	if (!mod->arch.core.plt || !mod->arch.init.plt) {
-		pr_err("%s: module PLT section missing\n", mod->name);
+		pr_err("%s: module PLT section(s) missing\n", mod->name);
 		return -ENOEXEC;
 	}
 	if (!syms) {
@@ -213,16 +233,29 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 		/* sort by type and symbol index */
 		sort(rels, numrels, sizeof(Elf32_Rel), cmp_rel, NULL);
 
-		plts += count_plts(syms, dstsec->sh_addr, rels, numrels);
+		if (strncmp(secstrings + dstsec->sh_name, ".init", 5) != 0)
+			core_plts += count_plts(syms, dstsec->sh_addr, rels,
+						numrels, s->sh_info);
+		else
+			init_plts += count_plts(syms, dstsec->sh_addr, rels,
+						numrels, s->sh_info);
 	}
 
-	mod->arch.plt->sh_type = SHT_NOBITS;
+	mod->arch.core.plt->sh_type = SHT_NOBITS;
-	mod->arch.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
+	mod->arch.core.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
-	mod->arch.plt->sh_addralign = L1_CACHE_BYTES;
+	mod->arch.core.plt->sh_addralign = L1_CACHE_BYTES;
-	mod->arch.plt->sh_size = round_up(plts * PLT_ENT_SIZE,
+	mod->arch.core.plt->sh_size = round_up(core_plts * PLT_ENT_SIZE,
 					       sizeof(struct plt_entries));
-	mod->arch.plt_count = 0;
+	mod->arch.core.plt_count = 0;
 
-	pr_debug("%s: plt=%x\n", __func__, mod->arch.plt->sh_size);
+	mod->arch.init.plt->sh_type = SHT_NOBITS;
+	mod->arch.init.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
+	mod->arch.init.plt->sh_addralign = L1_CACHE_BYTES;
+	mod->arch.init.plt->sh_size = round_up(init_plts * PLT_ENT_SIZE,
+					       sizeof(struct plt_entries));
+	mod->arch.init.plt_count = 0;
+
+	pr_debug("%s: plt=%x, init.plt=%x\n", __func__,
+		 mod->arch.core.plt->sh_size, mod->arch.init.plt->sh_size);
 	return 0;
 }

arch/arm/kernel/module.lds

@@ -1,3 +1,4 @@
 SECTIONS {
 	.plt : { BYTE(0) }
+	.init.plt : { BYTE(0) }
 }

arch/arm/kernel/setup.c

@@ -81,7 +81,7 @@ __setup("fpe=", fpe_setup);
 extern void init_default_cache_policy(unsigned long);
 extern void paging_init(const struct machine_desc *desc);
 extern void early_paging_init(const struct machine_desc *);
-extern void sanity_check_meminfo(void);
+extern void adjust_lowmem_bounds(void);
 extern enum reboot_mode reboot_mode;
 extern void setup_dma_zone(const struct machine_desc *desc);
 
@@ -1093,8 +1093,14 @@ void __init setup_arch(char **cmdline_p)
 	setup_dma_zone(mdesc);
 	xen_early_init();
 	efi_init();
-	sanity_check_meminfo();
+	/*
+	 * Make sure the calculation for lowmem/highmem is set appropriately
+	 * before reserving/allocating any mmeory
+	 */
+	adjust_lowmem_bounds();
 	arm_memblock_init(mdesc);
+	/* Memory may have been removed so recalculate the bounds. */
+	adjust_lowmem_bounds();
 
 	early_ioremap_reset();
 

arch/arm/kvm/coproc.c

@@ -93,12 +93,6 @@ int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	return 1;
 }
 
-int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run)
-{
-	kvm_inject_undefined(vcpu);
-	return 1;
-}
-
 static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
 {
 	/*
@@ -514,12 +508,7 @@ static int emulate_cp15(struct kvm_vcpu *vcpu,
 	return 1;
 }
 
-/**
+static struct coproc_params decode_64bit_hsr(struct kvm_vcpu *vcpu)
- * kvm_handle_cp15_64 -- handles a mrrc/mcrr trap on a guest CP15 access
- * @vcpu: The VCPU pointer
- * @run:  The kvm_run struct
- */
-int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	struct coproc_params params;
 
@@ -533,9 +522,38 @@ int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	params.Rt2 = (kvm_vcpu_get_hsr(vcpu) >> 10) & 0xf;
 	params.CRm = 0;
 
+	return params;
+}
+
+/**
+ * kvm_handle_cp15_64 -- handles a mrrc/mcrr trap on a guest CP15 access
+ * @vcpu: The VCPU pointer
+ * @run:  The kvm_run struct
+ */
+int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+	struct coproc_params params = decode_64bit_hsr(vcpu);
+
 	return emulate_cp15(vcpu, &params);
 }
 
+/**
+ * kvm_handle_cp14_64 -- handles a mrrc/mcrr trap on a guest CP14 access
+ * @vcpu: The VCPU pointer
+ * @run:  The kvm_run struct
+ */
+int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+	struct coproc_params params = decode_64bit_hsr(vcpu);
+
+	/* raz_wi cp14 */
+	pm_fake(vcpu, &params, NULL);
+
+	/* handled */
+	kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+	return 1;
+}
+
 static void reset_coproc_regs(struct kvm_vcpu *vcpu,
 			      const struct coproc_reg *table, size_t num)
 {
@@ -546,12 +564,7 @@ static void reset_coproc_regs(struct kvm_vcpu *vcpu,
 			table[i].reset(vcpu, &table[i]);
 }
 
-/**
+static struct coproc_params decode_32bit_hsr(struct kvm_vcpu *vcpu)
- * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
- * @vcpu: The VCPU pointer
- * @run:  The kvm_run struct
- */
-int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	struct coproc_params params;
 
@@ -565,9 +578,37 @@ int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	params.Op2 = (kvm_vcpu_get_hsr(vcpu) >> 17) & 0x7;
 	params.Rt2 = 0;
 
+	return params;
+}
+
+/**
+ * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
+ * @vcpu: The VCPU pointer
+ * @run:  The kvm_run struct
+ */
+int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+	struct coproc_params params = decode_32bit_hsr(vcpu);
 	return emulate_cp15(vcpu, &params);
 }
 
+/**
+ * kvm_handle_cp14_32 -- handles a mrc/mcr trap on a guest CP14 access
+ * @vcpu: The VCPU pointer
+ * @run:  The kvm_run struct
+ */
+int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+	struct coproc_params params = decode_32bit_hsr(vcpu);
+
+	/* raz_wi cp14 */
+	pm_fake(vcpu, &params, NULL);
+
+	/* handled */
+	kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+	return 1;
+}
+
 /******************************************************************************
  * Userspace API
  *****************************************************************************/

arch/arm/kvm/handle_exit.c

@@ -83,9 +83,9 @@ static exit_handle_fn arm_exit_handlers[] = {
 	[HSR_EC_WFI]		= kvm_handle_wfx,
 	[HSR_EC_CP15_32]	= kvm_handle_cp15_32,
 	[HSR_EC_CP15_64]	= kvm_handle_cp15_64,
-	[HSR_EC_CP14_MR]	= kvm_handle_cp14_access,
+	[HSR_EC_CP14_MR]	= kvm_handle_cp14_32,
 	[HSR_EC_CP14_LS]	= kvm_handle_cp14_load_store,
-	[HSR_EC_CP14_64]	= kvm_handle_cp14_access,
+	[HSR_EC_CP14_64]	= kvm_handle_cp14_64,
 	[HSR_EC_CP_0_13]	= kvm_handle_cp_0_13_access,
 	[HSR_EC_CP10_ID]	= kvm_handle_cp10_id,
 	[HSR_EC_HVC]		= handle_hvc,

arch/arm/kvm/hyp/Makefile

@@ -2,6 +2,8 @@
 # Makefile for Kernel-based Virtual Machine module, HYP part
 #
 
+ccflags-y += -fno-stack-protector
+
 KVM=../../../../virt/kvm
 
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o

arch/arm/kvm/hyp/switch.c

@@ -48,7 +48,9 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu, u32 *fpexc_host)
 	write_sysreg(HSTR_T(15), HSTR);
 	write_sysreg(HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11), HCPTR);
 	val = read_sysreg(HDCR);
-	write_sysreg(val | HDCR_TPM | HDCR_TPMCR, HDCR);
+	val |= HDCR_TPM | HDCR_TPMCR; /* trap performance monitors */
+	val |= HDCR_TDRA | HDCR_TDOSA | HDCR_TDA; /* trap debug regs */
+	write_sysreg(val, HDCR);
 }
 
 static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)

arch/arm/kvm/init.S

@@ -95,7 +95,6 @@ __do_hyp_init:
 	@  - Write permission implies XN: disabled
 	@  - Instruction cache: enabled
 	@  - Data/Unified cache: enabled
-	@  - Memory alignment checks: enabled
 	@  - MMU: enabled (this code must be run from an identity mapping)
 	mrc	p15, 4, r0, c1, c0, 0	@ HSCR
 	ldr	r2, =HSCTLR_MASK
@@ -103,8 +102,8 @@ __do_hyp_init:
 	mrc	p15, 0, r1, c1, c0, 0	@ SCTLR
 	ldr	r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C)
 	and	r1, r1, r2
- ARM(	ldr	r2, =(HSCTLR_M | HSCTLR_A)			)
+ ARM(	ldr	r2, =(HSCTLR_M)					)
- THUMB(	ldr	r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE)		)
+ THUMB(	ldr	r2, =(HSCTLR_M | HSCTLR_TE)			)
 	orr	r1, r1, r2
 	orr	r0, r0, r1
 	mcr	p15, 4, r0, c1, c0, 0	@ HSCR

arch/arm/kvm/mmu.c

@@ -872,6 +872,9 @@ static pmd_t *stage2_get_pmd(struct kvm *kvm, struct kvm_mmu_memory_cache *cache
 	pmd_t *pmd;
 
 	pud = stage2_get_pud(kvm, cache, addr);
+	if (!pud)
+		return NULL;
+
 	if (stage2_pud_none(*pud)) {
 		if (!cache)
 			return NULL;

arch/arm/kvm/psci.c

@@ -208,9 +208,10 @@ int kvm_psci_version(struct kvm_vcpu *vcpu)
 
 static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 {
-	int ret = 1;
+	struct kvm *kvm = vcpu->kvm;
 	unsigned long psci_fn = vcpu_get_reg(vcpu, 0) & ~((u32) 0);
 	unsigned long val;
+	int ret = 1;
 
 	switch (psci_fn) {
 	case PSCI_0_2_FN_PSCI_VERSION:
@@ -230,7 +231,9 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 		break;
 	case PSCI_0_2_FN_CPU_ON:
 	case PSCI_0_2_FN64_CPU_ON:
+		mutex_lock(&kvm->lock);
 		val = kvm_psci_vcpu_on(vcpu);
+		mutex_unlock(&kvm->lock);
 		break;
 	case PSCI_0_2_FN_AFFINITY_INFO:
 	case PSCI_0_2_FN64_AFFINITY_INFO:
@@ -279,6 +282,7 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 
 static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
 {
+	struct kvm *kvm = vcpu->kvm;
 	unsigned long psci_fn = vcpu_get_reg(vcpu, 0) & ~((u32) 0);
 	unsigned long val;
 
@@ -288,7 +292,9 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
 		val = PSCI_RET_SUCCESS;
 		break;
 	case KVM_PSCI_FN_CPU_ON:
+		mutex_lock(&kvm->lock);
 		val = kvm_psci_vcpu_on(vcpu);
+		mutex_unlock(&kvm->lock);
 		break;
 	default:
 		val = PSCI_RET_NOT_SUPPORTED;

arch/arm/mm/mmap.c

@@ -89,7 +89,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 
@@ -140,7 +140,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 			addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-				(!vma || addr + len <= vma->vm_start))
+				(!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 

arch/arm/mm/mmu.c

@@ -1152,13 +1152,12 @@ early_param("vmalloc", early_vmalloc);
 
 phys_addr_t arm_lowmem_limit __initdata = 0;
 
-void __init sanity_check_meminfo(void)
+void __init adjust_lowmem_bounds(void)
 {
 	phys_addr_t memblock_limit = 0;
-	int highmem = 0;
 	u64 vmalloc_limit;
 	struct memblock_region *reg;
-	bool should_use_highmem = false;
+	phys_addr_t lowmem_limit = 0;
 
 	/*
 	 * Let's use our own (unoptimized) equivalent of __pa() that is
@@ -1172,43 +1171,18 @@ void __init sanity_check_meminfo(void)
 	for_each_memblock(memory, reg) {
 		phys_addr_t block_start = reg->base;
 		phys_addr_t block_end = reg->base + reg->size;
-		phys_addr_t size_limit = reg->size;
 
-		if (reg->base >= vmalloc_limit)
+		if (reg->base < vmalloc_limit) {
-			highmem = 1;
+			if (block_end > lowmem_limit)
-		else
+				/*
-			size_limit = vmalloc_limit - reg->base;
+				 * Compare as u64 to ensure vmalloc_limit does
-
+				 * not get truncated. block_end should always
-
+				 * fit in phys_addr_t so there should be no
-		if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) {
+				 * issue with assignment.
-
+				 */
-			if (highmem) {
+				lowmem_limit = min_t(u64,
-				pr_notice("Ignoring RAM at %pa-%pa (!CONFIG_HIGHMEM)\n",
+							 vmalloc_limit,
-					  &block_start, &block_end);
+							 block_end);
-				memblock_remove(reg->base, reg->size);
-				should_use_highmem = true;
-				continue;
-			}
-
-			if (reg->size > size_limit) {
-				phys_addr_t overlap_size = reg->size - size_limit;
-
-				pr_notice("Truncating RAM at %pa-%pa",
-					  &block_start, &block_end);
-				block_end = vmalloc_limit;
-				pr_cont(" to -%pa", &block_end);
-				memblock_remove(vmalloc_limit, overlap_size);
-				should_use_highmem = true;
-			}
-		}
-
-		if (!highmem) {
-			if (block_end > arm_lowmem_limit) {
-				if (reg->size > size_limit)
-					arm_lowmem_limit = vmalloc_limit;
-				else
-					arm_lowmem_limit = block_end;
-			}
 
 			/*
 			 * Find the first non-pmd-aligned page, and point
@@ -1227,14 +1201,13 @@ void __init sanity_check_meminfo(void)
 				if (!IS_ALIGNED(block_start, PMD_SIZE))
 					memblock_limit = block_start;
 				else if (!IS_ALIGNED(block_end, PMD_SIZE))
-					memblock_limit = arm_lowmem_limit;
+					memblock_limit = lowmem_limit;
 			}
 
 		}
 	}
 
-	if (should_use_highmem)
+	arm_lowmem_limit = lowmem_limit;
-		pr_notice("Consider using a HIGHMEM enabled kernel.\n");
 
 	high_memory = __va(arm_lowmem_limit - 1) + 1;
 
@@ -1248,6 +1221,18 @@ void __init sanity_check_meminfo(void)
 	if (!memblock_limit)
 		memblock_limit = arm_lowmem_limit;
 
+	if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) {
+		if (memblock_end_of_DRAM() > arm_lowmem_limit) {
+			phys_addr_t end = memblock_end_of_DRAM();
+
+			pr_notice("Ignoring RAM at %pa-%pa\n",
+				  &memblock_limit, &end);
+			pr_notice("Consider using a HIGHMEM enabled kernel.\n");
+
+			memblock_remove(memblock_limit, end - memblock_limit);
+		}
+	}
+
 	memblock_set_current_limit(memblock_limit);
 }
 

arch/arm/mm/nommu.c

@@ -85,7 +85,7 @@ static unsigned long irbar_read(void)
 }
 
 /* MPU initialisation functions */
-void __init sanity_check_meminfo_mpu(void)
+void __init adjust_lowmem_bounds_mpu(void)
 {
 	phys_addr_t phys_offset = PHYS_OFFSET;
 	phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size;
@@ -274,7 +274,7 @@ void __init mpu_setup(void)
 	}
 }
 #else
-static void sanity_check_meminfo_mpu(void) {}
+static void adjust_lowmem_bounds_mpu(void) {}
 static void __init mpu_setup(void) {}
 #endif /* CONFIG_ARM_MPU */
 
@@ -295,10 +295,10 @@ void __init arm_mm_memblock_reserve(void)
 #endif
 }
 
-void __init sanity_check_meminfo(void)
+void __init adjust_lowmem_bounds(void)
 {
 	phys_addr_t end;
-	sanity_check_meminfo_mpu();
+	adjust_lowmem_bounds_mpu();
 	end = memblock_end_of_DRAM();
 	high_memory = __va(end - 1) + 1;
 	memblock_set_current_limit(end);

arch/arm/mm/proc-v7m.S

@@ -147,10 +147,10 @@ __v7m_setup_cont:
 
 	@ Configure caches (if implemented)
 	teq     r8, #0
-	stmneia	r12, {r0-r6, lr}	@ v7m_invalidate_l1 touches r0-r6
+	stmneia	sp, {r0-r6, lr}		@ v7m_invalidate_l1 touches r0-r6
 	blne	v7m_invalidate_l1
 	teq     r8, #0			@ re-evalutae condition
-	ldmneia	r12, {r0-r6, lr}
+	ldmneia	sp, {r0-r6, lr}
 
 	@ Configure the System Control Register to ensure 8-byte stack alignment
 	@ Note the STKALIGN bit is either RW or RAO.

arch/arm64/boot/dts/hisilicon/hi6220.dtsi

@@ -772,6 +772,7 @@
 			clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
 			clock-names = "ciu", "biu";
 			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
+			reset-names = "reset";
 			bus-width = <0x8>;
 			vmmc-supply = <&ldo19>;
 			pinctrl-names = "default";
@@ -795,6 +796,7 @@
 			clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
 			clock-names = "ciu", "biu";
 			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
+			reset-names = "reset";
 			vqmmc-supply = <&ldo7>;
 			vmmc-supply = <&ldo10>;
 			bus-width = <0x4>;
@@ -813,6 +815,7 @@
 			clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
 			clock-names = "ciu", "biu";
 			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
+			reset-names = "reset";
 			bus-width = <0x4>;
 			broken-cd;
 			pinctrl-names = "default", "idle";

arch/arm64/include/asm/asm-uaccess.h

@@ -0,0 +1,13 @@
+#ifndef __ASM_ASM_UACCESS_H
+#define __ASM_ASM_UACCESS_H
+
+/*
+ * Remove the address tag from a virtual address, if present.
+ */
+	.macro	clear_address_tag, dst, addr
+	tst	\addr, #(1 << 55)
+	bic	\dst, \addr, #(0xff << 56)
+	csel	\dst, \dst, \addr, eq
+	.endm
+
+#endif

arch/arm64/include/asm/barrier.h

@@ -44,23 +44,33 @@
 
 #define __smp_store_release(p, v)					\
 do {									\
+	union { typeof(*p) __val; char __c[1]; } __u =			\
+		{ .__val = (__force typeof(*p)) (v) }; 			\
 	compiletime_assert_atomic_type(*p);				\
 	switch (sizeof(*p)) {						\
 	case 1:								\
 		asm volatile ("stlrb %w1, %0"				\
-				: "=Q" (*p) : "r" (v) : "memory");	\
+				: "=Q" (*p)				\
+				: "r" (*(__u8 *)__u.__c)		\
+				: "memory");				\
 		break;							\
 	case 2:								\
 		asm volatile ("stlrh %w1, %0"				\
-				: "=Q" (*p) : "r" (v) : "memory");	\
+				: "=Q" (*p)				\
+				: "r" (*(__u16 *)__u.__c)		\
+				: "memory");				\
 		break;							\
 	case 4:								\
 		asm volatile ("stlr %w1, %0"				\
-				: "=Q" (*p) : "r" (v) : "memory");	\
+				: "=Q" (*p)				\
+				: "r" (*(__u32 *)__u.__c)		\
+				: "memory");				\
 		break;							\
 	case 8:								\
 		asm volatile ("stlr %1, %0"				\
-				: "=Q" (*p) : "r" (v) : "memory");	\
+				: "=Q" (*p)				\
+				: "r" (*(__u64 *)__u.__c)		\
+				: "memory");				\
 		break;							\
 	}								\
 } while (0)

arch/arm64/include/asm/cmpxchg.h

@@ -46,7 +46,7 @@ static inline unsigned long __xchg_case_##name(unsigned long x,		\
 	"	swp" #acq_lse #rel #sz "\t%" #w "3, %" #w "0, %2\n"	\
 		__nops(3)						\
 	"	" #nop_lse)						\
-	: "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr)			\
+	: "=&r" (ret), "=&r" (tmp), "+Q" (*(unsigned long *)ptr)	\
 	: "r" (x)							\
 	: cl);								\
 									\

arch/arm64/include/asm/kvm_emulate.h

@@ -240,6 +240,12 @@ static inline u8 kvm_vcpu_trap_get_fault_type(const struct kvm_vcpu *vcpu)
 	return kvm_vcpu_get_hsr(vcpu) & ESR_ELx_FSC_TYPE;
 }
 
+static inline int kvm_vcpu_sys_get_rt(struct kvm_vcpu *vcpu)
+{
+	u32 esr = kvm_vcpu_get_hsr(vcpu);
+	return (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT;
+}
+
 static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu)
 {
 	return vcpu_sys_reg(vcpu, MPIDR_EL1) & MPIDR_HWID_BITMASK;

arch/arm64/include/asm/sysreg.h

@@ -94,6 +94,10 @@
 #define SCTLR_ELx_A	(1 << 1)
 #define SCTLR_ELx_M	1
 
+#define SCTLR_EL2_RES1	((1 << 4)  | (1 << 5)  | (1 << 11) | (1 << 16) | \
+			 (1 << 16) | (1 << 18) | (1 << 22) | (1 << 23) | \
+			 (1 << 28) | (1 << 29))
+
 #define SCTLR_ELx_FLAGS	(SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
 			 SCTLR_ELx_SA | SCTLR_ELx_I)
 

arch/arm64/include/asm/uaccess.h

@@ -93,20 +93,21 @@ static inline void set_fs(mm_segment_t fs)
  */
 #define __range_ok(addr, size)						\
 ({									\
+	unsigned long __addr = (unsigned long __force)(addr);		\
 	unsigned long flag, roksum;					\
 	__chk_user_ptr(addr);						\
 	asm("adds %1, %1, %3; ccmp %1, %4, #2, cc; cset %0, ls"		\
 		: "=&r" (flag), "=&r" (roksum)				\
-		: "1" (addr), "Ir" (size),				\
+		: "1" (__addr), "Ir" (size),				\
 		  "r" (current_thread_info()->addr_limit)		\
 		: "cc");						\
 	flag;								\
 })
 
 /*
- * When dealing with data aborts or instruction traps we may end up with
+ * When dealing with data aborts, watchpoints, or instruction traps we may end
- * a tagged userland pointer. Clear the tag to get a sane pointer to pass
+ * up with a tagged userland pointer. Clear the tag to get a sane pointer to
- * on to access_ok(), for instance.
+ * pass on to access_ok(), for instance.
  */
 #define untagged_addr(addr)		sign_extend64(addr, 55)
 

arch/arm64/kernel/armv8_deprecated.c

@@ -309,7 +309,8 @@ static void __init register_insn_emulation_sysctl(struct ctl_table *table)
 	ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN,	\
 		CONFIG_ARM64_PAN)				\
 	: "=&r" (res), "+r" (data), "=&r" (temp), "=&r" (temp2)	\
-	: "r" (addr), "i" (-EAGAIN), "i" (-EFAULT),		\
+	: "r" ((unsigned long)addr), "i" (-EAGAIN),		\
+	  "i" (-EFAULT),					\
 	  "i" (__SWP_LL_SC_LOOPS)				\
 	: "memory")
 

arch/arm64/kernel/entry.S

@@ -30,6 +30,7 @@
 #include <asm/irq.h>
 #include <asm/memory.h>
 #include <asm/thread_info.h>
+#include <asm/asm-uaccess.h>
 #include <asm/unistd.h>
 
 /*
@@ -369,12 +370,13 @@ el1_da:
 	/*
 	 * Data abort handling
 	 */
-	mrs	x0, far_el1
+	mrs	x3, far_el1
 	enable_dbg
 	// re-enable interrupts if they were enabled in the aborted context
 	tbnz	x23, #7, 1f			// PSR_I_BIT
 	enable_irq
 1:
+	clear_address_tag x0, x3
 	mov	x2, sp				// struct pt_regs
 	bl	do_mem_abort
 
@@ -535,7 +537,7 @@ el0_da:
 	// enable interrupts before calling the main handler
 	enable_dbg_and_irq
 	ct_user_exit
-	bic	x0, x26, #(0xff << 56)
+	clear_address_tag x0, x26
 	mov	x1, x25
 	mov	x2, sp
 	bl	do_mem_abort

arch/arm64/kernel/hw_breakpoint.c

@@ -36,6 +36,7 @@
 #include <asm/traps.h>
 #include <asm/cputype.h>
 #include <asm/system_misc.h>
+#include <asm/uaccess.h>
 
 /* Breakpoint currently in use for each BRP. */
 static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);
@@ -696,7 +697,7 @@ static int watchpoint_handler(unsigned long addr, unsigned int esr,
 
 		/* Check if the watchpoint value matches. */
 		val = read_wb_reg(AARCH64_DBG_REG_WVR, i);
-		if (val != (addr & ~alignment_mask))
+		if (val != (untagged_addr(addr) & ~alignment_mask))
 			goto unlock;
 
 		/* Possible match, check the byte address select to confirm. */

arch/arm64/kernel/traps.c

@@ -435,7 +435,7 @@ int cpu_enable_cache_maint_trap(void *__unused)
 }
 
 #define __user_cache_maint(insn, address, res)			\
-	if (untagged_addr(address) >= user_addr_max())		\
+	if (address >= user_addr_max())				\
 		res = -EFAULT;					\
 	else							\
 		asm volatile (					\
@@ -458,7 +458,7 @@ static void user_cache_maint_handler(unsigned int esr, struct pt_regs *regs)
 	int crm = (esr & ESR_ELx_SYS64_ISS_CRM_MASK) >> ESR_ELx_SYS64_ISS_CRM_SHIFT;
 	int ret = 0;
 
-	address = (rt == 31) ? 0 : regs->regs[rt];
+	address = (rt == 31) ? 0 : untagged_addr(regs->regs[rt]);
 
 	switch (crm) {
 	case ESR_ELx_SYS64_ISS_CRM_DC_CVAU:	/* DC CVAU, gets promoted */

arch/arm64/kernel/vdso.c

@@ -217,10 +217,11 @@ void update_vsyscall(struct timekeeper *tk)
 		/* tkr_mono.cycle_last == tkr_raw.cycle_last */
 		vdso_data->cs_cycle_last	= tk->tkr_mono.cycle_last;
 		vdso_data->raw_time_sec		= tk->raw_time.tv_sec;
-		vdso_data->raw_time_nsec	= tk->raw_time.tv_nsec;
+		vdso_data->raw_time_nsec	= (tk->raw_time.tv_nsec <<
+						   tk->tkr_raw.shift) +
+						  tk->tkr_raw.xtime_nsec;
 		vdso_data->xtime_clock_sec	= tk->xtime_sec;
 		vdso_data->xtime_clock_nsec	= tk->tkr_mono.xtime_nsec;
-		/* tkr_raw.xtime_nsec == 0 */
 		vdso_data->cs_mono_mult		= tk->tkr_mono.mult;
 		vdso_data->cs_raw_mult		= tk->tkr_raw.mult;
 		/* tkr_mono.shift == tkr_raw.shift */

arch/arm64/kernel/vdso/gettimeofday.S

@@ -256,7 +256,6 @@ monotonic_raw:
 	seqcnt_check fail=monotonic_raw
 
 	/* All computations are done with left-shifted nsecs. */
-	lsl	x14, x14, x12
 	get_nsec_per_sec res=x9
 	lsl	x9, x9, x12
 

arch/arm64/kvm/hyp-init.S

@@ -102,10 +102,13 @@ __do_hyp_init:
 	tlbi	alle2
 	dsb	sy
 
-	mrs	x4, sctlr_el2
+	/*
-	and	x4, x4, #SCTLR_ELx_EE	// preserve endianness of EL2
+	 * Preserve all the RES1 bits while setting the default flags,
-	ldr	x5, =SCTLR_ELx_FLAGS
+	 * as well as the EE bit on BE. Drop the A flag since the compiler
-	orr	x4, x4, x5
+	 * is allowed to generate unaligned accesses.
+	 */
+	ldr	x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A))
+CPU_BE(	orr	x4, x4, #SCTLR_ELx_EE)
 	msr	sctlr_el2, x4
 	isb
 

arch/arm64/kvm/hyp/Makefile

@@ -2,6 +2,8 @@
 # Makefile for Kernel-based Virtual Machine module, HYP part
 #
 
+ccflags-y += -fno-stack-protector
+
 KVM=../../../../virt/kvm
 
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o

arch/arm64/kvm/sys_regs.c

@@ -1573,8 +1573,8 @@ static int kvm_handle_cp_64(struct kvm_vcpu *vcpu,
 {
 	struct sys_reg_params params;
 	u32 hsr = kvm_vcpu_get_hsr(vcpu);
-	int Rt = (hsr >> 5) & 0xf;
+	int Rt = kvm_vcpu_sys_get_rt(vcpu);
-	int Rt2 = (hsr >> 10) & 0xf;
+	int Rt2 = (hsr >> 10) & 0x1f;
 
 	params.is_aarch32 = true;
 	params.is_32bit = false;
@@ -1625,7 +1625,7 @@ static int kvm_handle_cp_32(struct kvm_vcpu *vcpu,
 {
 	struct sys_reg_params params;
 	u32 hsr = kvm_vcpu_get_hsr(vcpu);
-	int Rt  = (hsr >> 5) & 0xf;
+	int Rt  = kvm_vcpu_sys_get_rt(vcpu);
 
 	params.is_aarch32 = true;
 	params.is_32bit = true;
@@ -1740,7 +1740,7 @@ int kvm_handle_sys_reg(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	struct sys_reg_params params;
 	unsigned long esr = kvm_vcpu_get_hsr(vcpu);
-	int Rt = (esr >> 5) & 0x1f;
+	int Rt = kvm_vcpu_sys_get_rt(vcpu);
 	int ret;
 
 	trace_kvm_handle_sys_reg(esr);

arch/arm64/net/bpf_jit_comp.c

@@ -252,8 +252,9 @@ static int emit_bpf_tail_call(struct jit_ctx *ctx)
 	 */
 	off = offsetof(struct bpf_array, ptrs);
 	emit_a64_mov_i64(tmp, off, ctx);
-	emit(A64_LDR64(tmp, r2, tmp), ctx);
+	emit(A64_ADD(1, tmp, r2, tmp), ctx);
-	emit(A64_LDR64(prg, tmp, r3), ctx);
+	emit(A64_LSL(1, prg, r3, 3), ctx);
+	emit(A64_LDR64(prg, tmp, prg), ctx);
 	emit(A64_CBZ(1, prg, jmp_offset), ctx);
 
 	/* goto *(prog->bpf_func + prologue_size); */

arch/frv/include/asm/atomic.h

@@ -139,7 +139,7 @@ static inline void atomic64_dec(atomic64_t *v)
 #define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
 #define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
 #define atomic64_inc_and_test(v)	(atomic64_inc_return((v)) == 0)
-
+#define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1, 0)
 
 #define atomic_cmpxchg(v, old, new)	(cmpxchg(&(v)->counter, old, new))
 #define atomic_xchg(v, new)		(xchg(&(v)->counter, new))
@@ -161,6 +161,39 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 	return c;
 }
 
+static inline int atomic64_add_unless(atomic64_t *v, long long i, long long u)
+{
+	long long c, old;
+
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == u))
+			break;
+		old = atomic64_cmpxchg(v, c, c + i);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != u;
+}
+
+static inline long long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long long c, old, dec;
+
+	c = atomic64_read(v);
+	for (;;) {
+		dec = c - 1;
+		if (unlikely(dec < 0))
+			break;
+		old = atomic64_cmpxchg((v), c, dec);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+		return dec;
+}
+
 #define ATOMIC_OP(op)							\
 static inline int atomic_fetch_##op(int i, atomic_t *v)			\
 {									\

arch/frv/mm/elf-fdpic.c

@@ -74,7 +74,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(current->mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			goto success;
 	}
 

arch/metag/include/asm/uaccess.h

@@ -28,24 +28,32 @@
 
 #define segment_eq(a, b)	((a).seg == (b).seg)
 
-#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
+static inline int __access_ok(unsigned long addr, unsigned long size)
+{
+	/*
+	 * Allow access to the user mapped memory area, but not the system area
+	 * before it. The check extends to the top of the address space when
+	 * kernel access is allowed (there's no real reason to user copy to the
+	 * system area in any case).
+	 */
+	if (likely(addr >= META_MEMORY_BASE && addr < get_fs().seg &&
+		   size <= get_fs().seg - addr))
+		return true;
 	/*
 	 * Explicitly allow NULL pointers here. Parts of the kernel such
 	 * as readv/writev use access_ok to validate pointers, but want
 	 * to allow NULL pointers for various reasons. NULL pointers are
 	 * safe to allow through because the first page is not mappable on
 	 * Meta.
- *
- * We also wish to avoid letting user code access the system area
- * and the kernel half of the address space.
 	 */
-#define __user_bad(addr, size) (((addr) > 0 && (addr) < META_MEMORY_BASE) || \
+	if (!addr)
-				((addr) > PAGE_OFFSET &&		\
+		return true;
-				 (addr) < LINCORE_BASE))
+	/* Allow access to core code memory area... */
-
+	if (addr >= LINCORE_CODE_BASE && addr <= LINCORE_CODE_LIMIT &&
-static inline int __access_ok(unsigned long addr, unsigned long size)
+	    size <= LINCORE_CODE_LIMIT + 1 - addr)
-{
+		return true;
-	return __kernel_ok || !__user_bad(addr, size);
+	/* ... but no other areas. */
+	return false;
 }
 
 #define access_ok(type, addr, size) __access_ok((unsigned long)(addr),	\
@@ -186,8 +194,13 @@ do {                                                            \
 extern long __must_check __strncpy_from_user(char *dst, const char __user *src,
 					     long count);
 
-#define strncpy_from_user(dst, src, count) __strncpy_from_user(dst, src, count)
+static inline long
-
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	if (!access_ok(VERIFY_READ, src, 1))
+		return -EFAULT;
+	return __strncpy_from_user(dst, src, count);
+}
 /*
  * Return the size of a string (including the ending 0)
  *

arch/mips/Kconfig

@@ -1368,6 +1368,7 @@ config CPU_LOONGSON3
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
 	select MIPS_PGD_C0_CONTEXT
+	select MIPS_L1_CACHE_SHIFT_6
 	select GPIOLIB
 	help
 		The Loongson 3 processor implements the MIPS64R2 instruction

arch/mips/boot/Makefile

@@ -128,19 +128,19 @@ quiet_cmd_cpp_its_S = ITS     $@
 			-DADDR_BITS=$(ADDR_BITS) \
 			-DADDR_CELLS=$(itb_addr_cells)
 
-$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
 
-$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz)
 
-$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX)  FORCE
 	$(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2)
 
-$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma)
 
-$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S $(VMLINUX) FORCE
 	$(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo)
 
 quiet_cmd_itb-image = ITB     $@

arch/mips/kernel/branch.c

@@ -804,8 +804,10 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 			break;
 		}
 		/* Compact branch: BNEZC || JIALC */
-		if (insn.i_format.rs)
+		if (!insn.i_format.rs) {
+			/* JIALC: set $31/ra */
 			regs->regs[31] = epc + 4;
+		}
 		regs->cp0_epc += 8;
 		break;
 #endif

arch/mips/mm/mmap.c

@@ -92,7 +92,7 @@ static unsigned long arch_get_unmapped_area_common(struct file *filp,
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 

arch/mn10300/include/asm/switch_to.h

@@ -16,7 +16,7 @@
 struct task_struct;
 struct thread_struct;
 
-#if !defined(CONFIG_LAZY_SAVE_FPU)
+#if defined(CONFIG_FPU) && !defined(CONFIG_LAZY_SAVE_FPU)
 struct fpu_state_struct;
 extern asmlinkage void fpu_save(struct fpu_state_struct *);
 #define switch_fpu(prev, next)						\

arch/parisc/kernel/sys_parisc.c

@@ -88,7 +88,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		unsigned long len, unsigned long pgoff, unsigned long flags)
 {
 	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
+	struct vm_area_struct *vma, *prev;
 	unsigned long task_size = TASK_SIZE;
 	int do_color_align, last_mmap;
 	struct vm_unmapped_area_info info;
@@ -115,9 +115,10 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		else
 			addr = PAGE_ALIGN(addr);
 
-		vma = find_vma(mm, addr);
+		vma = find_vma_prev(mm, addr, &prev);
 		if (task_size - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)) &&
+		    (!prev || addr >= vm_end_gap(prev)))
 			goto found_addr;
 	}
 
@@ -141,7 +142,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 			  const unsigned long len, const unsigned long pgoff,
 			  const unsigned long flags)
 {
-	struct vm_area_struct *vma;
+	struct vm_area_struct *vma, *prev;
 	struct mm_struct *mm = current->mm;
 	unsigned long addr = addr0;
 	int do_color_align, last_mmap;
@@ -175,9 +176,11 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 			addr = COLOR_ALIGN(addr, last_mmap, pgoff);
 		else
 			addr = PAGE_ALIGN(addr);
-		vma = find_vma(mm, addr);
+
+		vma = find_vma_prev(mm, addr, &prev);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)) &&
+		    (!prev || addr >= vm_end_gap(prev)))
 			goto found_addr;
 	}
 

arch/powerpc/include/asm/mmu_context.h

@@ -70,7 +70,8 @@ extern void drop_cop(unsigned long acop, struct mm_struct *mm);
  * switch_mm is the entry point called from the architecture independent
  * code in kernel/sched/core.c
  */
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+static inline void switch_mm_irqs_off(struct mm_struct *prev,
+				      struct mm_struct *next,
 				      struct task_struct *tsk)
 {
 	/* Mark this context has been used on the new CPU */
@@ -110,6 +111,18 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	switch_mmu_context(prev, next, tsk);
 }
 
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch_mm_irqs_off(prev, next, tsk);
+	local_irq_restore(flags);
+}
+#define switch_mm_irqs_off switch_mm_irqs_off
+
+
 #define deactivate_mm(tsk,mm)	do { } while (0)
 
 /*

arch/powerpc/include/asm/topology.h

@@ -44,8 +44,22 @@ extern void __init dump_numa_cpu_topology(void);
 extern int sysfs_add_device_to_node(struct device *dev, int nid);
 extern void sysfs_remove_device_from_node(struct device *dev, int nid);
 
+static inline int early_cpu_to_node(int cpu)
+{
+	int nid;
+
+	nid = numa_cpu_lookup_table[cpu];
+
+	/*
+	 * Fall back to node 0 if nid is unset (it should be, except bugs).
+	 * This allows callers to safely do NODE_DATA(early_cpu_to_node(cpu)).
+	 */
+	return (nid < 0) ? 0 : nid;
+}
 #else
 
+static inline int early_cpu_to_node(int cpu) { return 0; }
+
 static inline void dump_numa_cpu_topology(void) {}
 
 static inline int sysfs_add_device_to_node(struct device *dev, int nid)

arch/powerpc/kernel/eeh_driver.c

@@ -724,7 +724,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus,
  */
 #define MAX_WAIT_FOR_RECOVERY 300
 
-static void eeh_handle_normal_event(struct eeh_pe *pe)
+static bool eeh_handle_normal_event(struct eeh_pe *pe)
 {
 	struct pci_bus *frozen_bus;
 	struct eeh_dev *edev, *tmp;
@@ -736,7 +736,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
 	if (!frozen_bus) {
 		pr_err("%s: Cannot find PCI bus for PHB#%d-PE#%x\n",
 			__func__, pe->phb->global_number, pe->addr);
-		return;
+		return false;
 	}
 
 	eeh_pe_update_time_stamp(pe);
@@ -870,7 +870,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
 	pr_info("EEH: Notify device driver to resume\n");
 	eeh_pe_dev_traverse(pe, eeh_report_resume, NULL);
 
-	return;
+	return false;
 
 excess_failures:
 	/*
@@ -915,8 +915,12 @@ perm_error:
 			pci_lock_rescan_remove();
 			pci_hp_remove_devices(frozen_bus);
 			pci_unlock_rescan_remove();
+
+			/* The passed PE should no longer be used */
+			return true;
 		}
 	}
+	return false;
 }
 
 static void eeh_handle_special_event(void)
@@ -982,7 +986,14 @@ static void eeh_handle_special_event(void)
 		 */
 		if (rc == EEH_NEXT_ERR_FROZEN_PE ||
 		    rc == EEH_NEXT_ERR_FENCED_PHB) {
-			eeh_handle_normal_event(pe);
+			/*
+			 * eeh_handle_normal_event() can make the PE stale if it
+			 * determines that the PE cannot possibly be recovered.
+			 * Don't modify the PE state if that's the case.
+			 */
+			if (eeh_handle_normal_event(pe))
+				continue;
+
 			eeh_pe_state_clear(pe, EEH_PE_RECOVERING);
 		} else {
 			pci_lock_rescan_remove();

arch/powerpc/kernel/exceptions-64e.S

@@ -735,8 +735,14 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	andis.	r15,r14,(DBSR_IC|DBSR_BT)@h
 	beq+	1f
 
+#ifdef CONFIG_RELOCATABLE
+	ld	r15,PACATOC(r13)
+	ld	r14,interrupt_base_book3e@got(r15)
+	ld	r15,__end_interrupts@got(r15)
+#else
 	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
 	LOAD_REG_IMMEDIATE(r15,__end_interrupts)
+#endif
 	cmpld	cr0,r10,r14
 	cmpld	cr1,r10,r15
 	blt+	cr0,1f
@@ -799,8 +805,14 @@ kernel_dbg_exc:
 	andis.	r15,r14,(DBSR_IC|DBSR_BT)@h
 	beq+	1f
 
+#ifdef CONFIG_RELOCATABLE
+	ld	r15,PACATOC(r13)
+	ld	r14,interrupt_base_book3e@got(r15)
+	ld	r15,__end_interrupts@got(r15)
+#else
 	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
 	LOAD_REG_IMMEDIATE(r15,__end_interrupts)
+#endif
 	cmpld	cr0,r10,r14
 	cmpld	cr1,r10,r15
 	blt+	cr0,1f

arch/powerpc/kernel/exceptions-64s.S

@@ -1411,10 +1411,8 @@ USE_TEXT_SECTION()
 	.align	7
 do_hash_page:
 #ifdef CONFIG_PPC_STD_MMU_64
-	andis.	r0,r4,0xa410		/* weird error? */
+	andis.	r0,r4,0xa450		/* weird error? */
 	bne-	handle_page_fault	/* if not, try to insert a HPTE */
-	andis.  r0,r4,DSISR_DABRMATCH@h
-	bne-    handle_dabr_fault
 	CURRENT_THREAD_INFO(r11, r1)
 	lwz	r0,TI_PREEMPT(r11)	/* If we're in an "NMI" */
 	andis.	r0,r0,NMI_MASK@h	/* (i.e. an irq when soft-disabled) */
@@ -1438,11 +1436,16 @@ do_hash_page:
 
 	/* Error */
 	blt-	13f
+
+	/* Reload DSISR into r4 for the DABR check below */
+	ld      r4,_DSISR(r1)
 #endif /* CONFIG_PPC_STD_MMU_64 */
 
 /* Here we have a page fault that hash_page can't handle. */
 handle_page_fault:
-11:	ld	r4,_DAR(r1)
+11:	andis.  r0,r4,DSISR_DABRMATCH@h
+	bne-    handle_dabr_fault
+	ld	r4,_DAR(r1)
 	ld	r5,_DSISR(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_page_fault

arch/powerpc/kernel/kprobes.c

@@ -511,6 +511,15 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 	regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc);
 #endif
 
+	/*
+	 * jprobes use jprobe_return() which skips the normal return
+	 * path of the function, and this messes up the accounting of the
+	 * function graph tracer.
+	 *
+	 * Pause function graph tracing while performing the jprobe function.
+	 */
+	pause_graph_tracing();
+
 	return 1;
 }
 
@@ -533,6 +542,8 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 	 * saved regs...
 	 */
 	memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs));
+	/* It's OK to start function graph tracing again */
+	unpause_graph_tracing();
 	preempt_enable_no_resched();
 	return 1;
 }

arch/powerpc/kernel/mce.c

@@ -205,6 +205,8 @@ static void machine_check_process_queued_event(struct irq_work *work)
 {
 	int index;
 
+	add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE);
+
 	/*
 	 * For now just print it to console.
 	 * TODO: log this error event to FSP or nvram.

arch/powerpc/kernel/nvram_64.c

@@ -561,6 +561,7 @@ static ssize_t nvram_pstore_read(u64 *id, enum pstore_type_id *type,
 static struct pstore_info nvram_pstore_info = {
 	.owner = THIS_MODULE,
 	.name = "nvram",
+	.flags = PSTORE_FLAGS_DMESG,
 	.open = nvram_pstore_open,
 	.read = nvram_pstore_read,
 	.write = nvram_pstore_write,

arch/powerpc/kernel/process.c

@@ -839,6 +839,25 @@ static void tm_reclaim_thread(struct thread_struct *thr,
 	if (!MSR_TM_SUSPENDED(mfmsr()))
 		return;
 
+	/*
+	 * If we are in a transaction and FP is off then we can't have
+	 * used FP inside that transaction. Hence the checkpointed
+	 * state is the same as the live state. We need to copy the
+	 * live state to the checkpointed state so that when the
+	 * transaction is restored, the checkpointed state is correct
+	 * and the aborted transaction sees the correct state. We use
+	 * ckpt_regs.msr here as that's what tm_reclaim will use to
+	 * determine if it's going to write the checkpointed state or
+	 * not. So either this will write the checkpointed registers,
+	 * or reclaim will. Similarly for VMX.
+	 */
+	if ((thr->ckpt_regs.msr & MSR_FP) == 0)
+		memcpy(&thr->ckfp_state, &thr->fp_state,
+		       sizeof(struct thread_fp_state));
+	if ((thr->ckpt_regs.msr & MSR_VEC) == 0)
+		memcpy(&thr->ckvr_state, &thr->vr_state,
+		       sizeof(struct thread_vr_state));
+
 	giveup_all(container_of(thr, struct task_struct, thread));
 
 	tm_reclaim(thr, thr->ckpt_regs.msr, cause);
@@ -1640,6 +1659,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 #ifdef CONFIG_VSX
 	current->thread.used_vsr = 0;
 #endif
+	current->thread.load_fp = 0;
 	memset(&current->thread.fp_state, 0, sizeof(current->thread.fp_state));
 	current->thread.fp_save_area = NULL;
 #ifdef CONFIG_ALTIVEC
@@ -1648,6 +1668,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 	current->thread.vr_save_area = NULL;
 	current->thread.vrsave = 0;
 	current->thread.used_vr = 0;
+	current->thread.load_vec = 0;
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_SPE
 	memset(current->thread.evr, 0, sizeof(current->thread.evr));
@@ -1659,6 +1680,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 	current->thread.tm_tfhar = 0;
 	current->thread.tm_texasr = 0;
 	current->thread.tm_tfiar = 0;
+	current->thread.load_tm = 0;
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 }
 EXPORT_SYMBOL(start_thread);

arch/powerpc/kernel/setup_64.c

@@ -595,7 +595,7 @@ void __init emergency_stack_init(void)
 
 static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
 {
-	return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align,
+	return __alloc_bootmem_node(NODE_DATA(early_cpu_to_node(cpu)), size, align,
 				    __pa(MAX_DMA_ADDRESS));
 }
 
@@ -606,7 +606,7 @@ static void __init pcpu_fc_free(void *ptr, size_t size)
 
 static int pcpu_cpu_distance(unsigned int from, unsigned int to)
 {
-	if (cpu_to_node(from) == cpu_to_node(to))
+	if (early_cpu_to_node(from) == early_cpu_to_node(to))
 		return LOCAL_DISTANCE;
 	else
 		return REMOTE_DISTANCE;

arch/powerpc/kernel/traps.c

@@ -302,8 +302,6 @@ long machine_check_early(struct pt_regs *regs)
 
 	__this_cpu_inc(irq_stat.mce_exceptions);
 
-	add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE);
-
 	if (cur_cpu_spec && cur_cpu_spec->machine_check_early)
 		handled = cur_cpu_spec->machine_check_early(regs);
 	return handled;
@@ -737,6 +735,8 @@ void machine_check_exception(struct pt_regs *regs)
 
 	__this_cpu_inc(irq_stat.mce_exceptions);
 
+	add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE);
+
 	/* See if any machine dependent calls. In theory, we would want
 	 * to call the CPU first, and call the ppc_md. one if the CPU
 	 * one returns a positive number. However there is existing code

arch/powerpc/kvm/book3s_hv.c

@@ -2807,12 +2807,34 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
 {
 	int r;
 	int srcu_idx;
+	unsigned long ebb_regs[3] = {};	/* shut up GCC */
 
 	if (!vcpu->arch.sane) {
 		run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
 		return -EINVAL;
 	}
 
+	/*
+	 * Don't allow entry with a suspended transaction, because
+	 * the guest entry/exit code will lose it.
+	 * If the guest has TM enabled, save away their TM-related SPRs
+	 * (they will get restored by the TM unavailable interrupt).
+	 */
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	if (cpu_has_feature(CPU_FTR_TM) && current->thread.regs &&
+	    (current->thread.regs->msr & MSR_TM)) {
+		if (MSR_TM_ACTIVE(current->thread.regs->msr)) {
+			run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+			run->fail_entry.hardware_entry_failure_reason = 0;
+			return -EINVAL;
+		}
+		current->thread.tm_tfhar = mfspr(SPRN_TFHAR);
+		current->thread.tm_tfiar = mfspr(SPRN_TFIAR);
+		current->thread.tm_texasr = mfspr(SPRN_TEXASR);
+		current->thread.regs->msr &= ~MSR_TM;
+	}
+#endif
+
 	kvmppc_core_prepare_to_enter(vcpu);
 
 	/* No need to go into the guest when all we'll do is come back out */
@@ -2834,6 +2856,13 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
 
 	flush_all_to_thread(current);
 
+	/* Save userspace EBB register values */
+	if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+		ebb_regs[0] = mfspr(SPRN_EBBHR);
+		ebb_regs[1] = mfspr(SPRN_EBBRR);
+		ebb_regs[2] = mfspr(SPRN_BESCR);
+	}
+
 	vcpu->arch.wqp = &vcpu->arch.vcore->wq;
 	vcpu->arch.pgdir = current->mm->pgd;
 	vcpu->arch.state = KVMPPC_VCPU_BUSY_IN_HOST;
@@ -2856,6 +2885,13 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			r = kvmppc_xics_rm_complete(vcpu, 0);
 	} while (is_kvmppc_resume_guest(r));
 
+	/* Restore userspace EBB register values */
+	if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+		mtspr(SPRN_EBBHR, ebb_regs[0]);
+		mtspr(SPRN_EBBRR, ebb_regs[1]);
+		mtspr(SPRN_BESCR, ebb_regs[2]);
+	}
+
  out:
 	vcpu->arch.state = KVMPPC_VCPU_NOTREADY;
 	atomic_dec(&vcpu->kvm->arch.vcpus_running);

arch/powerpc/mm/hugetlbpage-radix.c

@@ -65,7 +65,7 @@ radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		addr = ALIGN(addr, huge_page_size(h));
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 	/*

arch/powerpc/mm/mmap.c

@@ -106,7 +106,7 @@ radix__arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 
@@ -142,7 +142,7 @@ radix__arch_get_unmapped_area_topdown(struct file *filp,
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
-				(!vma || addr + len <= vma->vm_start))
+				(!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 

arch/powerpc/mm/mmu_context_iommu.c

@@ -81,7 +81,7 @@ struct page *new_iommu_non_cma_page(struct page *page, unsigned long private,
 	gfp_t gfp_mask = GFP_USER;
 	struct page *new_page;
 
-	if (PageHuge(page) || PageTransHuge(page) || PageCompound(page))
+	if (PageCompound(page))
 		return NULL;
 
 	if (PageHighMem(page))
@@ -100,7 +100,7 @@ static int mm_iommu_move_page_from_cma(struct page *page)
 	LIST_HEAD(cma_migrate_pages);
 
 	/* Ignore huge pages for now */
-	if (PageHuge(page) || PageTransHuge(page) || PageCompound(page))
+	if (PageCompound(page))
 		return -EBUSY;
 
 	lru_add_drain();

arch/powerpc/mm/slice.c

@@ -105,7 +105,7 @@ static int slice_area_is_free(struct mm_struct *mm, unsigned long addr,
 	if ((mm->task_size - len) < addr)
 		return 0;
 	vma = find_vma(mm, addr);
-	return (!vma || (addr + len) <= vma->vm_start);
+	return (!vma || (addr + len) <= vm_start_gap(vma));
 }
 
 static int slice_low_has_vma(struct mm_struct *mm, unsigned long slice)

arch/powerpc/perf/perf_regs.c

@@ -100,5 +100,6 @@ void perf_get_regs_user(struct perf_regs *regs_user,
 			struct pt_regs *regs_user_copy)
 {
 	regs_user->regs = task_pt_regs(current);
-	regs_user->abi  = perf_reg_abi(current);
+	regs_user->abi = (regs_user->regs) ? perf_reg_abi(current) :
+			 PERF_SAMPLE_REGS_ABI_NONE;
 }

arch/powerpc/platforms/cell/spu_base.c

@@ -197,7 +197,9 @@ static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
 	    (REGION_ID(ea) != USER_REGION_ID)) {
 
 		spin_unlock(&spu->register_lock);
-		ret = hash_page(ea, _PAGE_PRESENT | _PAGE_READ, 0x300, dsisr);
+		ret = hash_page(ea,
+				_PAGE_PRESENT | _PAGE_READ | _PAGE_PRIVILEGED,
+				0x300, dsisr);
 		spin_lock(&spu->register_lock);
 
 		if (!ret) {

arch/powerpc/platforms/pseries/dlpar.c

@@ -288,7 +288,6 @@ int dlpar_detach_node(struct device_node *dn)
 	if (rc)
 		return rc;
 
-	of_node_put(dn); /* Must decrement the refcount */
 	return 0;
 }
 

arch/powerpc/platforms/pseries/hotplug-memory.c

@@ -124,6 +124,7 @@ static struct property *dlpar_clone_drconf_property(struct device_node *dn)
 	for (i = 0; i < num_lmbs; i++) {
 		lmbs[i].base_addr = be64_to_cpu(lmbs[i].base_addr);
 		lmbs[i].drc_index = be32_to_cpu(lmbs[i].drc_index);
+		lmbs[i].aa_index = be32_to_cpu(lmbs[i].aa_index);
 		lmbs[i].flags = be32_to_cpu(lmbs[i].flags);
 	}
 
@@ -147,6 +148,7 @@ static void dlpar_update_drconf_property(struct device_node *dn,
 	for (i = 0; i < num_lmbs; i++) {
 		lmbs[i].base_addr = cpu_to_be64(lmbs[i].base_addr);
 		lmbs[i].drc_index = cpu_to_be32(lmbs[i].drc_index);
+		lmbs[i].aa_index = cpu_to_be32(lmbs[i].aa_index);
 		lmbs[i].flags = cpu_to_be32(lmbs[i].flags);
 	}
 

arch/powerpc/sysdev/simple_gpio.c

@@ -75,7 +75,8 @@ static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 
 static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
 {
-	struct u8_gpio_chip *u8_gc = gpiochip_get_data(&mm_gc->gc);
+	struct u8_gpio_chip *u8_gc =
+		container_of(mm_gc, struct u8_gpio_chip, mm_gc);
 
 	u8_gc->data = in_8(mm_gc->regs);
 }

arch/powerpc/sysdev/xics/icp-opal.c

@@ -130,14 +130,16 @@ static void icp_opal_cause_ipi(int cpu, unsigned long data)
 {
 	int hw_cpu = get_hard_smp_processor_id(cpu);
 
+	kvmppc_set_host_ipi(cpu, 1);
 	opal_int_set_mfrr(hw_cpu, IPI_PRIORITY);
 }
 
 static irqreturn_t icp_opal_ipi_action(int irq, void *dev_id)
 {
-	int hw_cpu = hard_smp_processor_id();
+	int cpu = smp_processor_id();
 
-	opal_int_set_mfrr(hw_cpu, 0xff);
+	kvmppc_set_host_ipi(cpu, 0);
+	opal_int_set_mfrr(get_hard_smp_processor_id(cpu), 0xff);
 
 	return smp_ipi_demux();
 }

arch/s390/kernel/crash_dump.c

@@ -426,6 +426,20 @@ static void *nt_vmcoreinfo(void *ptr)
 	return nt_init_name(ptr, 0, vmcoreinfo, size, "VMCOREINFO");
 }
 
+/*
+ * Initialize final note (needed for /proc/vmcore code)
+ */
+static void *nt_final(void *ptr)
+{
+	Elf64_Nhdr *note;
+
+	note = (Elf64_Nhdr *) ptr;
+	note->n_namesz = 0;
+	note->n_descsz = 0;
+	note->n_type = 0;
+	return PTR_ADD(ptr, sizeof(Elf64_Nhdr));
+}
+
 /*
  * Initialize ELF header (new kernel)
  */
@@ -513,6 +527,7 @@ static void *notes_init(Elf64_Phdr *phdr, void *ptr, u64 notes_offset)
 		if (sa->prefix != 0)
 			ptr = fill_cpu_elf_notes(ptr, cpu++, sa);
 	ptr = nt_vmcoreinfo(ptr);
+	ptr = nt_final(ptr);
 	memset(phdr, 0, sizeof(*phdr));
 	phdr->p_type = PT_NOTE;
 	phdr->p_offset = notes_offset;

arch/s390/kernel/entry.S

@@ -240,12 +240,17 @@ ENTRY(sie64a)
 	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
 .Lsie_done:
 # some program checks are suppressing. C code (e.g. do_protection_exception)
-# will rewind the PSW by the ILC, which is 4 bytes in case of SIE. Other
+# will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There
-# instructions between sie64a and .Lsie_done should not cause program
+# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable.
-# interrupts. So lets use a nop (47 00 00 00) as a landing pad.
+# Other instructions between sie64a and .Lsie_done should not cause program
+# interrupts. So lets use 3 nops as a landing pad for all possible rewinds.
 # See also .Lcleanup_sie
-.Lrewind_pad:
+.Lrewind_pad6:
-	nop	0
+	nopr	7
+.Lrewind_pad4:
+	nopr	7
+.Lrewind_pad2:
+	nopr	7
 	.globl sie_exit
 sie_exit:
 	lg	%r14,__SF_EMPTY+8(%r15)		# load guest register save area
@@ -258,7 +263,9 @@ sie_exit:
 	stg	%r14,__SF_EMPTY+16(%r15)	# set exit reason code
 	j	sie_exit
 
-	EX_TABLE(.Lrewind_pad,.Lsie_fault)
+	EX_TABLE(.Lrewind_pad6,.Lsie_fault)
+	EX_TABLE(.Lrewind_pad4,.Lsie_fault)
+	EX_TABLE(.Lrewind_pad2,.Lsie_fault)
 	EX_TABLE(sie_exit,.Lsie_fault)
 EXPORT_SYMBOL(sie64a)
 EXPORT_SYMBOL(sie_exit)
@@ -321,6 +328,7 @@ ENTRY(system_call)
 	lg	%r14,__LC_VDSO_PER_CPU
 	lmg	%r0,%r10,__PT_R0(%r11)
 	mvc	__LC_RETURN_PSW(16),__PT_PSW(%r11)
+.Lsysc_exit_timer:
 	stpt	__LC_EXIT_TIMER
 	mvc	__VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
 	lmg	%r11,%r15,__PT_R11(%r11)
@@ -606,6 +614,7 @@ ENTRY(io_int_handler)
 	lg	%r14,__LC_VDSO_PER_CPU
 	lmg	%r0,%r10,__PT_R0(%r11)
 	mvc	__LC_RETURN_PSW(16),__PT_PSW(%r11)
+.Lio_exit_timer:
 	stpt	__LC_EXIT_TIMER
 	mvc	__VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
 	lmg	%r11,%r15,__PT_R11(%r11)
@@ -1135,15 +1144,23 @@ cleanup_critical:
 	br	%r14
 
 .Lcleanup_sysc_restore:
+	# check if stpt has been executed
 	clg	%r9,BASED(.Lcleanup_sysc_restore_insn)
+	jh	0f
+	mvc	__LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
+	cghi	%r11,__LC_SAVE_AREA_ASYNC
 	je	0f
+	mvc	__LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER
+0:	clg	%r9,BASED(.Lcleanup_sysc_restore_insn+8)
+	je	1f
 	lg	%r9,24(%r11)		# get saved pointer to pt_regs
 	mvc	__LC_RETURN_PSW(16),__PT_PSW(%r9)
 	mvc	0(64,%r11),__PT_R8(%r9)
 	lmg	%r0,%r7,__PT_R0(%r9)
-0:	lmg	%r8,%r9,__LC_RETURN_PSW
+1:	lmg	%r8,%r9,__LC_RETURN_PSW
 	br	%r14
 .Lcleanup_sysc_restore_insn:
+	.quad	.Lsysc_exit_timer
 	.quad	.Lsysc_done - 4
 
 .Lcleanup_io_tif:
@@ -1151,15 +1168,20 @@ cleanup_critical:
 	br	%r14
 
 .Lcleanup_io_restore:
+	# check if stpt has been executed
 	clg	%r9,BASED(.Lcleanup_io_restore_insn)
-	je	0f
+	jh	0f
+	mvc	__LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER
+0:	clg	%r9,BASED(.Lcleanup_io_restore_insn+8)
+	je	1f
 	lg	%r9,24(%r11)		# get saved r11 pointer to pt_regs
 	mvc	__LC_RETURN_PSW(16),__PT_PSW(%r9)
 	mvc	0(64,%r11),__PT_R8(%r9)
 	lmg	%r0,%r7,__PT_R0(%r9)
-0:	lmg	%r8,%r9,__LC_RETURN_PSW
+1:	lmg	%r8,%r9,__LC_RETURN_PSW
 	br	%r14
 .Lcleanup_io_restore_insn:
+	.quad	.Lio_exit_timer
 	.quad	.Lio_done - 4
 
 .Lcleanup_idle:

arch/s390/kvm/gaccess.c

@@ -972,11 +972,12 @@ static int kvm_s390_shadow_tables(struct gmap *sg, unsigned long saddr,
 	ptr = asce.origin * 4096;
 	if (asce.r) {
 		*fake = 1;
+		ptr = 0;
 		asce.dt = ASCE_TYPE_REGION1;
 	}
 	switch (asce.dt) {
 	case ASCE_TYPE_REGION1:
-		if (vaddr.rfx01 > asce.tl && !asce.r)
+		if (vaddr.rfx01 > asce.tl && !*fake)
 			return PGM_REGION_FIRST_TRANS;
 		break;
 	case ASCE_TYPE_REGION2:
@@ -1004,8 +1005,7 @@ static int kvm_s390_shadow_tables(struct gmap *sg, unsigned long saddr,
 		union region1_table_entry rfte;
 
 		if (*fake) {
-			/* offset in 16EB guest memory block */
+			ptr += (unsigned long) vaddr.rfx << 53;
-			ptr = ptr + ((unsigned long) vaddr.rsx << 53UL);
 			rfte.val = ptr;
 			goto shadow_r2t;
 		}
@@ -1031,8 +1031,7 @@ shadow_r2t:
 		union region2_table_entry rste;
 
 		if (*fake) {
-			/* offset in 8PB guest memory block */
+			ptr += (unsigned long) vaddr.rsx << 42;
-			ptr = ptr + ((unsigned long) vaddr.rtx << 42UL);
 			rste.val = ptr;
 			goto shadow_r3t;
 		}
@@ -1059,8 +1058,7 @@ shadow_r3t:
 		union region3_table_entry rtte;
 
 		if (*fake) {
-			/* offset in 4TB guest memory block */
+			ptr += (unsigned long) vaddr.rtx << 31;
-			ptr = ptr + ((unsigned long) vaddr.sx << 31UL);
 			rtte.val = ptr;
 			goto shadow_sgt;
 		}
@@ -1096,8 +1094,7 @@ shadow_sgt:
 		union segment_table_entry ste;
 
 		if (*fake) {
-			/* offset in 2G guest memory block */
+			ptr += (unsigned long) vaddr.sx << 20;
-			ptr = ptr + ((unsigned long) vaddr.sx << 20UL);
 			ste.val = ptr;
 			goto shadow_pgt;
 		}

arch/s390/mm/mmap.c

@@ -98,7 +98,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 
@@ -136,7 +136,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 		addr = PAGE_ALIGN(addr);
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr && addr >= mmap_min_addr &&
-				(!vma || addr + len <= vma->vm_start))
+				(!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 

arch/sh/mm/mmap.c

@@ -63,7 +63,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 
@@ -113,7 +113,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 

arch/sparc/Kconfig

@@ -187,9 +187,9 @@ config NR_CPUS
 	int "Maximum number of CPUs"
 	depends on SMP
 	range 2 32 if SPARC32
-	range 2 1024 if SPARC64
+	range 2 4096 if SPARC64
 	default 32 if SPARC32
-	default 64 if SPARC64
+	default 4096 if SPARC64
 
 source kernel/Kconfig.hz
 

arch/sparc/include/asm/mmu_64.h

@@ -52,7 +52,7 @@
 #define CTX_NR_MASK		TAG_CONTEXT_BITS
 #define CTX_HW_MASK		(CTX_NR_MASK | CTX_PGSZ_MASK)
 
-#define CTX_FIRST_VERSION	((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL))
+#define CTX_FIRST_VERSION	BIT(CTX_VERSION_SHIFT)
 #define CTX_VALID(__ctx)	\
 	 (!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK))
 #define CTX_HWBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_HW_MASK)

arch/sparc/include/asm/mmu_context_64.h

@@ -17,13 +17,8 @@ extern spinlock_t ctx_alloc_lock;
 extern unsigned long tlb_context_cache;
 extern unsigned long mmu_context_bmap[];
 
+DECLARE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm);
 void get_new_mmu_context(struct mm_struct *mm);
-#ifdef CONFIG_SMP
-void smp_new_mmu_context_version(void);
-#else
-#define smp_new_mmu_context_version() do { } while (0)
-#endif
-
 int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
 void destroy_context(struct mm_struct *mm);
 
@@ -74,8 +69,9 @@ void __flush_tlb_mm(unsigned long, unsigned long);
 static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk)
 {
 	unsigned long ctx_valid, flags;
-	int cpu;
+	int cpu = smp_processor_id();
 
+	per_cpu(per_cpu_secondary_mm, cpu) = mm;
 	if (unlikely(mm == &init_mm))
 		return;
 
@@ -121,7 +117,6 @@ static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, str
 	 * for the first time, we must flush that context out of the
 	 * local TLB.
 	 */
-	cpu = smp_processor_id();
 	if (!ctx_valid || !cpumask_test_cpu(cpu, mm_cpumask(mm))) {
 		cpumask_set_cpu(cpu, mm_cpumask(mm));
 		__flush_tlb_mm(CTX_HWBITS(mm->context),
@@ -131,26 +126,7 @@ static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, str
 }
 
 #define deactivate_mm(tsk,mm)	do { } while (0)
-
+#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, NULL)
-/* Activate a new MM instance for the current task. */
-static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm)
-{
-	unsigned long flags;
-	int cpu;
-
-	spin_lock_irqsave(&mm->context.lock, flags);
-	if (!CTX_VALID(mm->context))
-		get_new_mmu_context(mm);
-	cpu = smp_processor_id();
-	if (!cpumask_test_cpu(cpu, mm_cpumask(mm)))
-		cpumask_set_cpu(cpu, mm_cpumask(mm));
-
-	load_secondary_context(mm);
-	__flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT);
-	tsb_context_switch(mm);
-	spin_unlock_irqrestore(&mm->context.lock, flags);
-}
-
 #endif /* !(__ASSEMBLY__) */
 
 #endif /* !(__SPARC64_MMU_CONTEXT_H) */

arch/sparc/include/asm/pgtable_32.h

@@ -91,9 +91,9 @@ extern unsigned long pfn_base;
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
  */
-extern unsigned long empty_zero_page;
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 
-#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
 
 /*
  * In general all page table modifications should use the V8 atomic

arch/sparc/include/asm/pil.h

@@ -20,7 +20,6 @@
 #define PIL_SMP_CALL_FUNC	1
 #define PIL_SMP_RECEIVE_SIGNAL	2
 #define PIL_SMP_CAPTURE		3
-#define PIL_SMP_CTX_NEW_VERSION	4
 #define PIL_DEVICE_IRQ		5
 #define PIL_SMP_CALL_FUNC_SNGL	6
 #define PIL_DEFERRED_PCR_WORK	7