Merge remote-tracking branch 'stable/linux-5.4.y' into rpi-5.4.y

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201120104541.058449969@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/admin-guide/kernel-parameters.txt

@@ -567,7 +567,7 @@
 			loops can be debugged more effectively on production
 			systems.
 
-	clearcpuid=BITNUM [X86]
+	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
 			numbers. Note the Linux specific bits are not necessarily
@@ -2667,6 +2667,8 @@
 					       mds=off [X86]
 					       tsx_async_abort=off [X86]
 					       kvm.nx_huge_pages=off [X86]
+					       no_entry_flush [PPC]
+					       no_uaccess_flush [PPC]
 
 				Exceptions:
 					       This does not have any effect on
@@ -2989,6 +2991,8 @@
 
 	noefi		Disable EFI runtime services support.
 
+	no_entry_flush  [PPC] Don't flush the L1-D cache when entering the kernel.
+
 	noexec		[IA-64]
 
 	noexec		[X86]
@@ -3038,6 +3042,9 @@
 	nospec_store_bypass_disable
 			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
 
+	no_uaccess_flush
+	                [PPC] Don't flush the L1-D cache after accessing user data.
+
 	noxsave		[BUGS=X86] Disables x86 extended register state save
 			and restore using xsave. The kernel will fallback to
 			enabling legacy floating-point and sse state.
@@ -5462,6 +5469,14 @@
 			as generic guest with no PV drivers. Currently support
 			XEN HVM, KVM, HYPER_V and VMWARE guest.
 
+	xen.event_eoi_delay=	[XEN]
+			How long to delay EOI handling in case of event
+			storms (jiffies). Default is 10.
+
+	xen.event_loop_timeout=	[XEN]
+			After which time (jiffies) the event handling loop
+			should start to delay EOI handling. Default is 2.
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]

Documentation/asm-annotations.rst

@@ -0,0 +1,216 @@
+Assembler Annotations
+=====================
+
+Copyright (c) 2017-2019 Jiri Slaby
+
+This document describes the new macros for annotation of data and code in
+assembly. In particular, it contains information about ``SYM_FUNC_START``,
+``SYM_FUNC_END``, ``SYM_CODE_START``, and similar.
+
+Rationale
+---------
+Some code like entries, trampolines, or boot code needs to be written in
+assembly. The same as in C, such code is grouped into functions and
+accompanied with data. Standard assemblers do not force users into precisely
+marking these pieces as code, data, or even specifying their length.
+Nevertheless, assemblers provide developers with such annotations to aid
+debuggers throughout assembly. On top of that, developers also want to mark
+some functions as *global* in order to be visible outside of their translation
+units.
+
+Over time, the Linux kernel has adopted macros from various projects (like
+``binutils``) to facilitate such annotations. So for historic reasons,
+developers have been using ``ENTRY``, ``END``, ``ENDPROC``, and other
+annotations in assembly.  Due to the lack of their documentation, the macros
+are used in rather wrong contexts at some locations. Clearly, ``ENTRY`` was
+intended to denote the beginning of global symbols (be it data or code).
+``END`` used to mark the end of data or end of special functions with
+*non-standard* calling convention. In contrast, ``ENDPROC`` should annotate
+only ends of *standard* functions.
+
+When these macros are used correctly, they help assemblers generate a nice
+object with both sizes and types set correctly. For example, the result of
+``arch/x86/lib/putuser.S``::
+
+   Num:    Value          Size Type    Bind   Vis      Ndx Name
+    25: 0000000000000000    33 FUNC    GLOBAL DEFAULT    1 __put_user_1
+    29: 0000000000000030    37 FUNC    GLOBAL DEFAULT    1 __put_user_2
+    32: 0000000000000060    36 FUNC    GLOBAL DEFAULT    1 __put_user_4
+    35: 0000000000000090    37 FUNC    GLOBAL DEFAULT    1 __put_user_8
+
+This is not only important for debugging purposes. When there are properly
+annotated objects like this, tools can be run on them to generate more useful
+information. In particular, on properly annotated objects, ``objtool`` can be
+run to check and fix the object if needed. Currently, ``objtool`` can report
+missing frame pointer setup/destruction in functions. It can also
+automatically generate annotations for :doc:`ORC unwinder <x86/orc-unwinder>`
+for most code. Both of these are especially important to support reliable
+stack traces which are in turn necessary for :doc:`Kernel live patching
+<livepatch/livepatch>`.
+
+Caveat and Discussion
+---------------------
+As one might realize, there were only three macros previously. That is indeed
+insufficient to cover all the combinations of cases:
+
+* standard/non-standard function
+* code/data
+* global/local symbol
+
+There was a discussion_ and instead of extending the current ``ENTRY/END*``
+macros, it was decided that brand new macros should be introduced instead::
+
+    So how about using macro names that actually show the purpose, instead
+    of importing all the crappy, historic, essentially randomly chosen
+    debug symbol macro names from the binutils and older kernels?
+
+.. _discussion: https://lkml.kernel.org/r/20170217104757.28588-1-jslaby@suse.cz
+
+Macros Description
+------------------
+
+The new macros are prefixed with the ``SYM_`` prefix and can be divided into
+three main groups:
+
+1. ``SYM_FUNC_*`` -- to annotate C-like functions. This means functions with
+   standard C calling conventions, i.e. the stack contains a return address at
+   the predefined place and a return from the function can happen in a
+   standard way. When frame pointers are enabled, save/restore of frame
+   pointer shall happen at the start/end of a function, respectively, too.
+
+   Checking tools like ``objtool`` should ensure such marked functions conform
+   to these rules. The tools can also easily annotate these functions with
+   debugging information (like *ORC data*) automatically.
+
+2. ``SYM_CODE_*`` -- special functions called with special stack. Be it
+   interrupt handlers with special stack content, trampolines, or startup
+   functions.
+
+   Checking tools mostly ignore checking of these functions. But some debug
+   information still can be generated automatically. For correct debug data,
+   this code needs hints like ``UNWIND_HINT_REGS`` provided by developers.
+
+3. ``SYM_DATA*`` -- obviously data belonging to ``.data`` sections and not to
+   ``.text``. Data do not contain instructions, so they have to be treated
+   specially by the tools: they should not treat the bytes as instructions,
+   nor assign any debug information to them.
+
+Instruction Macros
+~~~~~~~~~~~~~~~~~~
+This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
+
+* ``SYM_FUNC_START`` and ``SYM_FUNC_START_LOCAL`` are supposed to be **the
+  most frequent markings**. They are used for functions with standard calling
+  conventions -- global and local. Like in C, they both align the functions to
+  architecture specific ``__ALIGN`` bytes. There are also ``_NOALIGN`` variants
+  for special cases where developers do not want this implicit alignment.
+
+  ``SYM_FUNC_START_WEAK`` and ``SYM_FUNC_START_WEAK_NOALIGN`` markings are
+  also offered as an assembler counterpart to the *weak* attribute known from
+  C.
+
+  All of these **shall** be coupled with ``SYM_FUNC_END``. First, it marks
+  the sequence of instructions as a function and computes its size to the
+  generated object file. Second, it also eases checking and processing such
+  object files as the tools can trivially find exact function boundaries.
+
+  So in most cases, developers should write something like in the following
+  example, having some asm instructions in between the macros, of course::
+
+    SYM_FUNC_START(function_hook)
+        ... asm insns ...
+    SYM_FUNC_END(function_hook)
+
+  In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
+  and ``ENDPROC`` macros.
+
+* ``SYM_FUNC_START_ALIAS`` and ``SYM_FUNC_START_LOCAL_ALIAS`` serve for those
+  who decided to have two or more names for one function. The typical use is::
+
+    SYM_FUNC_START_ALIAS(__memset)
+    SYM_FUNC_START(memset)
+        ... asm insns ...
+    SYM_FUNC_END(memset)
+    SYM_FUNC_END_ALIAS(__memset)
+
+  In this example, one can call ``__memset`` or ``memset`` with the same
+  result, except the debug information for the instructions is generated to
+  the object file only once -- for the non-``ALIAS`` case.
+
+* ``SYM_CODE_START`` and ``SYM_CODE_START_LOCAL`` should be used only in
+  special cases -- if you know what you are doing. This is used exclusively
+  for interrupt handlers and similar where the calling convention is not the C
+  one. ``_NOALIGN`` variants exist too. The use is the same as for the ``FUNC``
+  category above::
+
+    SYM_CODE_START_LOCAL(bad_put_user)
+        ... asm insns ...
+    SYM_CODE_END(bad_put_user)
+
+  Again, every ``SYM_CODE_START*`` **shall** be coupled by ``SYM_CODE_END``.
+
+  To some extent, this category corresponds to deprecated ``ENTRY`` and
+  ``END``. Except ``END`` had several other meanings too.
+
+* ``SYM_INNER_LABEL*`` is used to denote a label inside some
+  ``SYM_{CODE,FUNC}_START`` and ``SYM_{CODE,FUNC}_END``.  They are very similar
+  to C labels, except they can be made global. An example of use::
+
+    SYM_CODE_START(ftrace_caller)
+        /* save_mcount_regs fills in first two parameters */
+        ...
+
+    SYM_INNER_LABEL(ftrace_caller_op_ptr, SYM_L_GLOBAL)
+        /* Load the ftrace_ops into the 3rd parameter */
+        ...
+
+    SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
+        call ftrace_stub
+        ...
+        retq
+    SYM_CODE_END(ftrace_caller)
+
+Data Macros
+~~~~~~~~~~~
+Similar to instructions, there is a couple of macros to describe data in the
+assembly.
+
+* ``SYM_DATA_START`` and ``SYM_DATA_START_LOCAL`` mark the start of some data
+  and shall be used in conjunction with either ``SYM_DATA_END``, or
+  ``SYM_DATA_END_LABEL``. The latter adds also a label to the end, so that
+  people can use ``lstack`` and (local) ``lstack_end`` in the following
+  example::
+
+    SYM_DATA_START_LOCAL(lstack)
+        .skip 4096
+    SYM_DATA_END_LABEL(lstack, SYM_L_LOCAL, lstack_end)
+
+* ``SYM_DATA`` and ``SYM_DATA_LOCAL`` are variants for simple, mostly one-line
+  data::
+
+    SYM_DATA(HEAP,     .long rm_heap)
+    SYM_DATA(heap_end, .long rm_stack)
+
+  In the end, they expand to ``SYM_DATA_START`` with ``SYM_DATA_END``
+  internally.
+
+Support Macros
+~~~~~~~~~~~~~~
+All the above reduce themselves to some invocation of ``SYM_START``,
+``SYM_END``, or ``SYM_ENTRY`` at last. Normally, developers should avoid using
+these.
+
+Further, in the above examples, one could see ``SYM_L_LOCAL``. There are also
+``SYM_L_GLOBAL`` and ``SYM_L_WEAK``. All are intended to denote linkage of a
+symbol marked by them. They are used either in ``_LABEL`` variants of the
+earlier macros, or in ``SYM_START``.
+
+
+Overriding Macros
+~~~~~~~~~~~~~~~~~
+Architecture can also override any of the macros in their own
+``asm/linkage.h``, including macros specifying the type of a symbol
+(``SYM_T_FUNC``, ``SYM_T_OBJECT``, and ``SYM_T_NONE``).  As every macro
+described in this file is surrounded by ``#ifdef`` + ``#endif``, it is enough
+to define the macros differently in the aforementioned architecture-dependent
+header.

Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml

@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree
+  bindings
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: microchip,mcp2517fd
+        description: for MCP2517FD
+      - const: microchip,mcp2518fd
+        description: for MCP2518FD
+      - const: microchip,mcp251xfd
+        description: to autodetect chip variant
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that powers the CAN controller.
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+
+  microchip,rx-int-gpios:
+    description:
+      GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which
+      signals a pending RX interrupt.
+    maxItems: 1
+
+  spi-max-frequency:
+    description:
+      Must be half or less of "clocks" frequency.
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        can@0 {
+            compatible = "microchip,mcp251xfd";
+            reg = <0>;
+            clocks = <&can0_osc>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&can0_pins>;
+            spi-max-frequency = <20000000>;
+            interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>;
+            microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg5v0>;
+            xceiver-supply = <&reg5v0>;
+        };
+    };

Documentation/index.rst

@@ -135,6 +135,14 @@ needed).
    mic/index
    scheduler/index
 
+Architecture-agnostic documentation
+-----------------------------------
+
+.. toctree::
+   :maxdepth: 2
+
+   asm-annotations
+
 Architecture-specific documentation
 -----------------------------------
 

Documentation/media/uapi/v4l/colorspaces-defs.rst

@@ -36,8 +36,7 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
 :c:type:`v4l2_hsv_encoding` specifies which encoding is used.
 
 .. note:: The default R'G'B' quantization is full range for all
-   colorspaces except for BT.2020 which uses limited range R'G'B'
-   quantization.
+   colorspaces. HSV formats are always full range.
 
 .. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
 
@@ -169,8 +168,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
       - Details
     * - ``V4L2_QUANTIZATION_DEFAULT``
       - Use the default quantization encoding as defined by the
-	colorspace. This is always full range for R'G'B' (except for the
-	BT.2020 colorspace) and HSV. It is usually limited range for Y'CbCr.
+	colorspace. This is always full range for R'G'B' and HSV.
+	It is usually limited range for Y'CbCr.
     * - ``V4L2_QUANTIZATION_FULL_RANGE``
       - Use the full range quantization encoding. I.e. the range [0…1] is
 	mapped to [0…255] (with possible clipping to [1…254] to avoid the
@@ -180,4 +179,4 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
     * - ``V4L2_QUANTIZATION_LIM_RANGE``
       - Use the limited range quantization encoding. I.e. the range [0…1]
 	is mapped to [16…235]. Cb and Cr are mapped from [-0.5…0.5] to
-	[16…240].
+	[16…240]. Limited Range cannot be used with HSV.

Documentation/media/uapi/v4l/colorspaces-details.rst

@@ -377,9 +377,8 @@ Colorspace BT.2020 (V4L2_COLORSPACE_BT2020)
 The :ref:`itu2020` standard defines the colorspace used by Ultra-high
 definition television (UHDTV). The default transfer function is
 ``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_BT2020``. The default R'G'B' quantization is limited
-range (!), and so is the default Y'CbCr quantization. The chromaticities
-of the primary colors and the white reference are:
+``V4L2_YCBCR_ENC_BT2020``. The default Y'CbCr quantization is limited range.
+The chromaticities of the primary colors and the white reference are:
 
 
 

Documentation/networking/ip-sysctl.txt

@@ -1000,12 +1000,14 @@ icmp_ratelimit - INTEGER
 icmp_msgs_per_sec - INTEGER
 	Limit maximal number of ICMP packets sent per second from this host.
 	Only messages whose type matches icmp_ratemask (see below) are
-	controlled by this limit.
+	controlled by this limit. For security reasons, the precise count
+	of messages per second is randomized.
 	Default: 1000
 
 icmp_msgs_burst - INTEGER
 	icmp_msgs_per_sec controls number of ICMP packets sent per second,
 	while icmp_msgs_burst controls the burst size of these packets.
+	For security reasons, the precise burst size is randomized.
 	Default: 50
 
 icmp_ratemask - INTEGER

Documentation/networking/j1939.rst

@@ -414,8 +414,8 @@ Send:
 		.can_family = AF_CAN,
 		.can_addr.j1939 = {
 			.name = J1939_NO_NAME;
-			.pgn = 0x30,
-			.addr = 0x12300,
+			.addr = 0x30,
+			.pgn = 0x12300,
 		},
 	};
 

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 4
-SUBLEVEL = 72
+SUBLEVEL = 79
 EXTRAVERSION =
 NAME = Kleptomaniac Octopus
 

arch/Kconfig

@@ -405,6 +405,13 @@ config MMU_GATHER_NO_RANGE
 config HAVE_MMU_GATHER_NO_GATHER
 	bool
 
+config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
+	bool
+	help
+	  Temporary select until all architectures can be converted to have
+	  irqs disabled over activate_mm. Architectures that do IPI based TLB
+	  shootdowns should enable this.
+
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 

arch/arc/boot/dts/axc001.dtsi

@@ -85,7 +85,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;

arch/arc/boot/dts/axc003.dtsi

@@ -129,7 +129,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;

arch/arc/boot/dts/axc003_idu.dtsi

@@ -135,7 +135,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;

arch/arc/boot/dts/vdk_axc003.dtsi

@@ -46,7 +46,7 @@
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;

arch/arc/boot/dts/vdk_axc003_idu.dtsi

@@ -54,7 +54,7 @@
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;

arch/arc/kernel/perf_event.c

@@ -562,7 +562,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 {
 	struct arc_reg_pct_build pct_bcr;
 	struct arc_reg_cc_build cc_bcr;
-	int i, has_interrupts, irq;
+	int i, has_interrupts, irq = -1;
 	int counter_size;	/* in bits */
 
 	union cc_name {
@@ -637,19 +637,28 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 		.attr_groups	= arc_pmu->attr_groups,
 	};
 
-	if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
+	if (has_interrupts) {
+		irq = platform_get_irq(pdev, 0);
+		if (irq >= 0) {
+			int ret;
 
-		arc_pmu->irq = irq;
+			arc_pmu->irq = irq;
 
-		/* intc map function ensures irq_set_percpu_devid() called */
-		request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
-				   this_cpu_ptr(&arc_pmu_cpu));
+			/* intc map function ensures irq_set_percpu_devid() called */
+			ret = request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
+						 this_cpu_ptr(&arc_pmu_cpu));
+
+			if (!ret)
+				on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
+			else
+				irq = -1;
+		}
 
-		on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
-	} else {
-		arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
 	}
 
+	if (irq == -1)
+		arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
+
 	/*
 	 * perf parser doesn't really like '-' symbol in events name, so let's
 	 * use '_' in arc pct name as it goes to kernel PMU event prefix.

arch/arc/kernel/stacktrace.c

@@ -112,7 +112,7 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 		int (*consumer_fn) (unsigned int, void *), void *arg)
 {
 #ifdef CONFIG_ARC_DW2_UNWIND
-	int ret = 0;
+	int ret = 0, cnt = 0;
 	unsigned int address;
 	struct unwind_frame_info frame_info;
 
@@ -132,6 +132,11 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 			break;
 
 		frame_info.regs.r63 = frame_info.regs.r31;
+
+		if (cnt++ > 128) {
+			printk("unwinder looping too long, aborting !\n");
+			return 0;
+		}
 	}
 
 	return address;		/* return the last address it saw */

arch/arc/plat-hsdk/Kconfig

@@ -8,5 +8,6 @@ menuconfig ARC_SOC_HSDK
 	select ARC_HAS_ACCL_REGS
 	select ARC_IRQ_NO_AUTOSAVE
 	select CLK_HSDK
+	select RESET_CONTROLLER
 	select RESET_HSDK
 	select HAVE_PCI

arch/arm/Kconfig

@@ -507,8 +507,10 @@ config ARCH_S3C24XX
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_IO_H
+	select S3C2410_WATCHDOG
 	select SAMSUNG_ATAGS
 	select USE_OF
+	select WATCHDOG
 	help
 	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
 	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST

arch/arm/boot/dts/Makefile

@@ -10,8 +10,9 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2709-rpi-2-b.dtb \
 	bcm2710-rpi-2-b.dtb \
 	bcm2710-rpi-3-b.dtb \
-	bcm2711-rpi-4-b.dtb \
 	bcm2710-rpi-3-b-plus.dtb \
+	bcm2711-rpi-4-b.dtb \
+	bcm2711-rpi-400.dtb \
 	bcm2710-rpi-cm3.dtb \
 	bcm2711-rpi-cm4.dtb
 

arch/arm/boot/dts/bcm2708-rpi-zero-w.dts

@@ -11,7 +11,7 @@
 	model = "Raspberry Pi Zero W";
 
 	chosen {
-		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
+		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
 	};
 
 	aliases {
@@ -152,6 +152,7 @@
 &audio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&audio_pins>;
+	brcm,disable-headphones = <1>;
 };
 
 / {

arch/arm/boot/dts/bcm2708-rpi-zero.dts

@@ -10,7 +10,7 @@
 	model = "Raspberry Pi Zero";
 
 	chosen {
-		bootargs = "coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
+		bootargs = "coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
 	};
 };
 
@@ -106,6 +106,7 @@
 &audio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&audio_pins>;
+	brcm,disable-headphones = <1>;
 };
 
 / {

arch/arm/boot/dts/bcm270x.dtsi

@@ -3,7 +3,7 @@
 
 / {
 	chosen {
-		bootargs = "coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
+		bootargs = "coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
 		/delete-property/ stdout-path;
 	};
 

arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts

@@ -12,7 +12,7 @@
 	model = "Raspberry Pi 3 Model B+";
 
 	chosen {
-		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
+		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
 	};
 
 	aliases {

arch/arm/boot/dts/bcm2710-rpi-3-b.dts

@@ -12,7 +12,7 @@
 	model = "Raspberry Pi 3 Model B";
 
 	chosen {
-		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
+		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
 	};
 
 	aliases {

arch/arm/boot/dts/bcm2711-rpi-4-b.dts

@@ -234,7 +234,7 @@
 
 / {
 	chosen {
-		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
+		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
 	};
 
 	aliases {

arch/arm/boot/dts/bcm2711-rpi-400.dts

@@ -0,0 +1,585 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,400", "brcm,bcm2711";
+	model = "Raspberry Pi 400";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0>;
+	};
+
+	aliases {
+		emmc2bus = &emmc2bus;
+		ethernet0 = &genet;
+		pcie0 = &pcie0;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	};
+
+	sd_io_1v8_reg: sd_io_1v8_reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		status = "okay";
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "PWR_LED_OFF",
+				  "GLOBAL_RESET",
+				  "VDD_SD_IO_SEL",
+				  "CAM_GPIO",
+				  "SD_PWR_ON",
+				  "SD_OC_N";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
+	status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* EMMC2 is used to drive the SD card */
+&emmc2 {
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	broken-cd;
+	status = "okay";
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@1 {
+		/* No PHY interrupt */
+		reg = <0x1>;
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&vchiq {
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+// =============================================
+// Downstream rpi- changes
+
+#include "bcm270x.dtsi"
+#include "bcm271x-rpi-bt.dtsi"
+
+/ {
+	soc {
+		/delete-node/ pixelvalve@7e807000;
+		/delete-node/ hdmi@7e902000;
+	};
+};
+
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
+#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
+
+/ {
+	chosen {
+		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		mmc0 = &emmc2;
+		mmc1 = &mmcnr;
+		mmc2 = &sdhost;
+		/delete-property/ i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		/delete-property/ intc;
+	};
+
+	/delete-node/ wifi-pwrseq;
+};
+
+&mmcnr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins &bt_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi3_pins: spi3_pins {
+		brcm,pins = <1 2 3>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi3_cs_pins: spi3_cs_pins {
+		brcm,pins = <0 24>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi4_pins: spi4_pins {
+		brcm,pins = <5 6 7>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi4_cs_pins: spi4_cs_pins {
+		brcm,pins = <4 25>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi5_pins: spi5_pins {
+		brcm,pins = <13 14 15>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi5_cs_pins: spi5_cs_pins {
+		brcm,pins = <12 26>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi6_pins: spi6_pins {
+		brcm,pins = <19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi6_cs_pins: spi6_cs_pins {
+		brcm,pins = <18 27>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c3_pins: i2c3 {
+		brcm,pins = <4 5>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c4_pins: i2c4 {
+		brcm,pins = <8 9>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c5_pins: i2c5 {
+		brcm,pins = <12 13>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c6_pins: i2c6 {
+		brcm,pins = <22 23>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+
+	sdio_pins: sdio_pins {
+		brcm,pins =     <34 35 36 37 38 39>;
+		brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
+		brcm,pull =     <0 2 2 2 2 2>;
+	};
+
+	bt_pins: bt_pins {
+		brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0
+				 // to fool pinctrl
+		brcm,function = <0>;
+		brcm,pull = <2>;
+	};
+
+	uart0_pins: uart0_pins {
+		brcm,pins = <32 33>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+		brcm,pull = <0 2>;
+	};
+
+	uart1_pins: uart1_pins {
+		brcm,pins;
+		brcm,function;
+		brcm,pull;
+	};
+
+	uart2_pins: uart2_pins {
+		brcm,pins = <0 1>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
+
+	uart3_pins: uart3_pins {
+		brcm,pins = <4 5>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
+
+	uart4_pins: uart4_pins {
+		brcm,pins = <8 9>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
+
+	uart5_pins: uart5_pins {
+		brcm,pins = <12 13>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
+};
+
+&i2c0if {
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+/ {
+	__overrides__ {
+		/delete-property/ i2c2_baudrate;
+		/delete-property/ i2c2_iknowwhatimdoing;
+	};
+};
+
+&firmwarekms {
+	compatible = "raspberrypi,rpi-firmware-kms-2711";
+};
+
+// =============================================
+// Board specific stuff here
+
+/ {
+	sd_vcc_reg: sd_vcc_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	power_ctrl: power_ctrl {
+		compatible = "gpio-poweroff";
+		gpios = <&expgpio 5 0>;
+		force;
+	};
+};
+
+&sdhost {
+	status = "disabled";
+};
+
+&emmc2 {
+	vmmc-supply = <&sd_vcc_reg>;
+};
+
+&phy1 {
+	led-modes = <0x00 0x08>; /* link/activity link */
+};
+
+&gpio {
+	audio_pins: audio_pins {
+		brcm,pins = <40 41>;
+		brcm,function = <4>;
+	};
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "default-on";
+		default-state = "on";
+		gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+	};
+
+	pwr_led: pwr {
+		label = "led1";
+		linux,default-trigger = "default-on";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pwm1 {
+	status = "disabled";
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+	brcm,disable-headphones = <1>;
+};
+
+&vc4 {
+	status = "disabled";
+};
+
+&pixelvalve0 {
+	status = "disabled";
+};
+
+&pixelvalve1 {
+	status = "disabled";
+};
+
+&pixelvalve2 {
+	status = "disabled";
+};
+
+&pixelvalve3 {
+	status = "disabled";
+};
+
+&pixelvalve4 {
+	status = "disabled";
+};
+
+&hdmi0 {
+	status = "disabled";
+};
+
+&ddc0 {
+	status = "disabled";
+};
+
+&hdmi1 {
+	status = "disabled";
+};
+
+&ddc1 {
+	status = "disabled";
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		pwr_led_gpio = <&pwr_led>,"gpios:4";
+		pwr_led_activelow = <&pwr_led>,"gpios:8";
+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+
+		eth_led0 = <&phy1>,"led-modes:0";
+		eth_led1 = <&phy1>,"led-modes:4";
+
+		sd_poll_once = <&emmc2>, "non-removable?";
+		spi_dma4 = <&spi0>, "dmas:0=", <&dma40>,
+			   <&spi0>, "dmas:8=", <&dma40>;
+	};
+};

arch/arm/boot/dts/bcm2711-rpi-cm4.dts

@@ -174,7 +174,7 @@
 
 / {
 	chosen {
-		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
+		bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
 	};
 
 	aliases {
@@ -460,6 +460,7 @@
 &audio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&audio_pins>;
+	brcm,disable-headphones = <1>;
 };
 
 &vc4 {

arch/arm/boot/dts/imx6sl.dtsi

@@ -936,8 +936,10 @@
 			};
 
 			rngb: rngb@21b4000 {
+				compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb";
 				reg = <0x021b4000 0x4000>;
 				interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
 			};
 
 			weim: weim@21b8000 {

arch/arm/boot/dts/meson8.dtsi

@@ -230,8 +230,6 @@
 				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,

arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts

@@ -192,6 +192,7 @@
 					fixed-link {
 						speed = <1000>;
 						full-duplex;
+						pause;
 					};
 				};
 			};

arch/arm/boot/dts/omap4.dtsi

@@ -328,7 +328,7 @@
 			status = "disabled";
 		};
 
-		target-module@56000000 {
+		sgx_module: target-module@56000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0x5600fe00 0x4>,
 			      <0x5600fe10 0x4>;

arch/arm/boot/dts/omap443x.dtsi

@@ -74,3 +74,13 @@
 };
 
 /include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+	assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+			  <&dpll_per_m7x2_ck>;
+	assigned-clock-rates = <0>, <153600000>;
+	assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};

arch/arm/boot/dts/overlays/Makefile

@@ -14,6 +14,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	adv728x-m.dtbo \
 	akkordion-iqdacplus.dtbo \
 	allo-boss-dac-pcm512x-audio.dtbo \
+	allo-boss2-dac-audio.dtbo \
 	allo-digione.dtbo \
 	allo-katana-dac-audio.dtbo \
 	allo-piano-dac-pcm512x-audio.dtbo \
@@ -107,6 +108,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	mcp23s17.dtbo \
 	mcp2515-can0.dtbo \
 	mcp2515-can1.dtbo \
+	mcp251xfd.dtbo \
 	mcp3008.dtbo \
 	mcp3202.dtbo \
 	mcp342x.dtbo \
@@ -125,6 +127,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	pca953x.dtbo \
 	pibell.dtbo \
 	pifacedigital.dtbo \
+	pifi-40.dtbo \
 	piglow.dtbo \
 	piscreen.dtbo \
 	piscreen2r.dtbo \
@@ -157,7 +160,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	sc16is752-spi1.dtbo \
 	sdhost.dtbo \
 	sdio.dtbo \
-	sdtweak.dtbo \
 	sh1106-spi.dtbo \
 	smi.dtbo \
 	smi-dev.dtbo \

arch/arm/boot/dts/overlays/README

@@ -420,6 +420,12 @@ Params: 24db_digital_gain       Allow gain to be applied via the PCM512x codec
                                 slave"
 
 
+Name:   allo-boss2-dac-audio
+Info:   Configures the Allo Boss2 DAC audio card
+Load:   dtoverlay=allo-boss2-dac-audio
+Params: <None>
+
+
 Name:   allo-digione
 Info:   Configures the Allo Digione audio card
 Load:   dtoverlay=allo-digione
@@ -1757,6 +1763,28 @@ Params: oscillator              Clock frequency for the CAN controller (Hz)
         interrupt               GPIO for interrupt signal
 
 
+Name:   mcp251xfd
+Info:   Configures the MCP251XFD CAN controller family
+        For devices on spi1 or spi2, the interfaces should be enabled
+        with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays.
+Load:   dtoverlay=mcp251xfd,<param>=<val>
+Params: spi<n>-<m>              Configure device at spi<n>, cs<m>
+                                (boolean, required)
+
+        oscillator              Clock frequency for the CAN controller (Hz)
+
+        speed                   Maximum SPI frequence (Hz)
+
+        interrupt               GPIO for interrupt signal
+
+        rx_interrupt            GPIO for RX interrupt signal (nINT1) (optional)
+
+        xceiver_enable          GPIO for CAN transceiver enable (optional)
+
+        xceiver_active_high     specifiy if CAN transceiver enable pin is
+                                active high (optional, default: active low)
+
+
 Name:   mcp3008
 Info:   Configures MCP3008 A/D converters
         For devices on spi1 or spi2, the interfaces should be enabled
@@ -2000,6 +2028,12 @@ Params: spi-present-mask        8-bit integer, bitmap indicating MCP23S17 SPI0
                                 0-3, which can be configured with JP1 and JP2.
 
 
+Name:   pifi-40
+Info:   Configures the PiFi 40W stereo amplifier
+Load:   dtoverlay=pifi-40
+Params: <None>
+
+
 Name:   piglow
 Info:   Configures the PiGlow by pimoroni.com
 Load:   dtoverlay=piglow
@@ -2395,29 +2429,10 @@ Load:   <Deprecated>
 
 
 Name:   sdtweak
-Info:   Tunes the bcm2835-sdhost SD/MMC driver
-        N.B. This functionality is now available via the sd_* dtparams in the
-        base DTB.
-Load:   dtoverlay=sdtweak,<param>=<val>
-Params: overclock_50            Clock (in MHz) to use when the MMC framework
-                                requests 50MHz
-
-        force_pio               Disable DMA support (default off)
-
-        pio_limit               Number of blocks above which to use DMA
-                                (default 1)
-
-        debug                   Enable debug output (default off)
-
-        poll_once               Looks for a card once after booting. Useful
-                                for network booting scenarios to avoid the
-                                overhead of continuous polling. N.B. Using
-                                this option restricts the system to using a
-                                single card per boot (or none at all).
-                                (default off)
-
-        enable                  Set to off to completely disable the interface
-                                (default on)
+Info:   This overlay is now deprecated. Use the sd_* dtparams in the
+        base DTB, e.g. "dtoverlay=sdtweak,poll_once" becomes
+        "dtparam=sd_poll_once".
+Load:   <Deprecated>
 
 
 Name:   sh1106-spi

arch/arm/boot/dts/overlays/allo-boss2-dac-audio-overlay.dts

@@ -0,0 +1,57 @@
+/* * Definitions for Allo Boss2 DAC boards
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2s>;
+		__overlay__ {
+			#sound-dai-cells = <0>;
+			status = "okay";
+			cpu_port: port {
+				cpu_endpoint: endpoint {
+					remote-endpoint = <&codec_endpoint>;
+					bitclock-master = <&codec_endpoint>;
+					frame-master = <&codec_endpoint>;
+					dai-format = "i2s";
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+			allo-cs43130@30 {
+				#sound-dai-cells = <0>;
+				compatible = "allo,allo-cs43198";
+				clock44-gpio = <&gpio 5 0>;
+				clock48-gpio = <&gpio 6 0>;
+				reg = <0x30>;
+				port {
+					codec_endpoint: endpoint {
+					remote-endpoint = <&cpu_endpoint>;
+					};
+				};
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&sound>;
+		boss2_dac: __overlay__ {
+			compatible = "audio-graph-card";
+			label = "Allo Boss2";
+			dais = <&cpu_port>;
+			status = "okay";
+		};
+	};
+};
+

arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts

@@ -23,12 +23,14 @@
 				#sound-dai-cells = <0>;
 				compatible = "ti,pcm5122";
 				reg = <0x4c>;
+				sound-name-prefix = "Main";
 				status = "okay";
 			};
 			allo_pcm5122_4d: pcm5122@4d {
 				#sound-dai-cells = <0>;
 				compatible = "ti,pcm5122";
 				reg = <0x4d>;
+				sound-name-prefix = "Sub";
 				status = "okay";
 			};
 		};

arch/arm/boot/dts/overlays/audremap-overlay.dts

@@ -26,6 +26,13 @@
 		};
 	};
 
+	fragment@3 {
+		target = <&audio>;
+		__overlay__  {
+			brcm,disable-headphones = <0>;
+		};
+	};
+
 	__overrides__ {
 		swap_lr = <&frag0>, "swap_lr?";
 		enable_jack = <&frag0>, "enable_jack?";

arch/arm/boot/dts/overlays/mcp251xfd-overlay.dts

@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/bcm2835.h>
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&spidev0>;
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@1 {
+		target = <&spidev1>;
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@2 {
+		target-path = "spi1/spidev@0";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@3 {
+		target-path = "spi1/spidev@1";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@4 {
+		target-path = "spi1/spidev@2";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@5 {
+		target-path = "spi2/spidev@0";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@6 {
+		target-path = "spi2/spidev@1";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@7 {
+		target-path = "spi2/spidev@2";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@8 {
+		target = <&gpio>;
+		__overlay__ {
+			mcp251xfd_pins: mcp251xfd_pins {
+				brcm,pins = <25>;
+				brcm,function = <BCM2835_FSEL_GPIO_IN>;
+			};
+		};
+	};
+
+	fragment@9 {
+		target-path = "/clocks";
+		__overlay__ {
+			clk_mcp251xfd_osc: mcp251xfd-osc {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <40000000>;
+			};
+		};
+	};
+
+	mcp251xfd_frag: fragment@10 {
+		target = <&spi0>;
+		__overlay__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp251xfd: mcp251xfd@0 {
+				compatible = "microchip,mcp251xfd";
+				reg = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&mcp251xfd_pins>;
+				spi-max-frequency = <20000000>;
+				interrupt-parent = <&gpio>;
+				interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk_mcp251xfd_osc>;
+			};
+		};
+	};
+
+	fragment@11 {
+		target = <&mcp251xfd>;
+		mcp251xfd_rx_int_gpios: __dormant__ {
+			microchip,rx-int-gpios = <&gpio 255 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fragment@12 {
+		target = <&gpio>;
+		__dormant__ {
+			mcp251xfd_xceiver_pins: mcp251xfd_xceiver_pins {
+				brcm,pins = <255>;
+				brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+			};
+		};
+	};
+
+	fragment@13 {
+		target-path = "/";
+		__dormant__ {
+			reg_mcp251xfd_xceiver: reg_mcp251xfd_xceiver {
+				compatible = "regulator-fixed";
+				regulator-name = "mcp251xfd_xceiver";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				gpio = <&gpio 4 GPIO_ACTIVE_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&mcp251xfd_xceiver_pins>;
+			};
+		};
+	};
+
+	fragment@14 {
+		target = <&mcp251xfd>;
+		__dormant__ {
+			xceiver-supply = <&reg_mcp251xfd_xceiver>;
+		};
+	};
+
+	__overrides__ {
+		spi0-0 = <0>, "+0",
+			<&mcp251xfd_frag>, "target:0=", <&spi0>,
+			<&mcp251xfd>, "reg:0=0",
+			<&mcp251xfd_pins>, "name=mcp251xfd_spi0_0_pins",
+			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi0-0-osc",
+			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi0_0_xceiver_pins",
+			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi0-0-xceiver",
+			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi0-0-xceiver";
+		spi0-1 = <0>, "+1",
+			<&mcp251xfd_frag>, "target:0=", <&spi0>,
+			<&mcp251xfd>, "reg:0=1",
+			<&mcp251xfd_pins>, "name=mcp251xfd_spi0_1_pins",
+			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi0-1-osc",
+			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi0_1_xceiver_pins",
+			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi0-1-xceiver",
+			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi0-1-xceiver";
+		spi1-0 = <0>, "+2",
+			<&mcp251xfd_frag>, "target:0=", <&spi1>,
+			<&mcp251xfd>, "reg:0=0",
+			<&mcp251xfd_pins>, "name=mcp251xfd_spi1_0_pins",
+			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi1-0-osc",
+			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi1_0_xceiver_pins",
+			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi1-0-xceiver",
+			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi1-0-xceiver";
+		spi1-1 = <0>, "+3",
+			<&mcp251xfd_frag>, "target:0=", <&spi1>,
+			<&mcp251xfd>, "reg:0=1",
+			<&mcp251xfd_pins>, "name=mcp251xfd_spi1_1_pins",
+			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi1-1-osc",
+			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi1_1_xceiver_pins",
+			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi1-1-xceiver",
+			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi1-1-xceiver";
+		spi1-2 = <0>, "+4",
+			<&mcp251xfd_frag>, "target:0=", <&spi1>,
+			<&mcp251xfd>, "reg:0=2",
+			<&mcp251xfd_pins>, "name=mcp251xfd_spi1_2_pins",
+			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi1-2-osc",
+			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi1_2_xceiver_pins",
+			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi1-2-xceiver",
+			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi1-2-xceiver";
+		spi2-0 = <0>, "+5",
+			<&mcp251xfd_frag>, "target:0=", <&spi2>,
+			<&mcp251xfd>, "reg:0=0",
+			<&mcp251xfd_pins>, "name=mcp251xfd_spi2_0_pins",
+			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi2-0-osc",
+			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi2_0_xceiver_pins",
+			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi2-0-xceiver",
+			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi2-0-xceiver";
+		spi2-1 = <0>, "+6",
+			<&mcp251xfd_frag>, "target:0=", <&spi2>,
+			<&mcp251xfd>, "reg:0=1",
+			<&mcp251xfd_pins>, "name=mcp251xfd_spi2_1_pins",
+			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi2-1-osc",
+			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi2_1_xceiver_pins",
+			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi2-1-xceiver",
+			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi2-1-xceiver";
+		spi2-2 = <0>, "+7",
+			<&mcp251xfd_frag>, "target:0=", <&spi2>,
+			<&mcp251xfd>, "reg:0=2",
+			<&mcp251xfd_pins>, "name=mcp251xfd_spi2_2_pins",
+			<&clk_mcp251xfd_osc>, "name=mcp251xfd-spi2-2-osc",
+			<&mcp251xfd_xceiver_pins>, "name=mcp251xfd_spi2_2_xceiver_pins",
+			<&reg_mcp251xfd_xceiver>, "name=reg-mcp251xfd-spi2-2-xceiver",
+			<&reg_mcp251xfd_xceiver>, "regulator-name=mcp251xfd-spi2-2-xceiver";
+		oscillator = <&clk_mcp251xfd_osc>, "clock-frequency:0";
+		speed = <&mcp251xfd>, "spi-max-frequency:0";
+		interrupt = <&mcp251xfd_pins>, "brcm,pins:0",
+			<&mcp251xfd>, "interrupts:0";
+		rx_interrupt = <0>, "+11",
+			<&mcp251xfd_pins>, "brcm,pins:4",
+			<&mcp251xfd_rx_int_gpios>, "microchip,rx-int-gpios:4";
+		xceiver_enable = <0>, "+12+13+14",
+			<&mcp251xfd_xceiver_pins>, "brcm,pins:0",
+			<&reg_mcp251xfd_xceiver>, "gpio:4";
+		xceiver_active_high = <&reg_mcp251xfd_xceiver>, "enable-active-high?";
+	};
+};

arch/arm/boot/dts/overlays/overlay_map.dts

@@ -61,6 +61,10 @@
 		deprecated = "use sdio,bus_width=1,gpios_22_25";
 	};
 
+	sdtweak {
+		deprecated = "use 'dtparam=sd_poll_once' etc.";
+	};
+
 	spi0-cs {
 		renamed = "spi0-2cs";
 	};

arch/arm/boot/dts/overlays/pifi-40-overlay.dts

@@ -0,0 +1,50 @@
+// Definitions for PiFi-40 Amp
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&i2s>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			tas5711l: audio-codec@1a {
+				compatible = "ti,tas5711";
+				reg = <0x1a>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "Left";
+				status = "okay";
+			};
+
+			tas5711r: audio-codec@1b {
+				compatible = "ti,tas5711";
+				reg = <0x1b>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "Right";
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&sound>;
+		pifi_40: __overlay__ {
+			compatible = "pifi,pifi-40";
+			audio-codec = <&tas5711l &tas5711r>;
+			i2s-controller = <&i2s>;
+			pdn-gpios = <&gpio 23 1>;
+			status = "okay";
+		};
+	};
+};

arch/arm/boot/dts/overlays/sdtweak-overlay.dts

@@ -1,25 +0,0 @@
-/dts-v1/;
-/plugin/;
-
-/* Provide backwards compatible aliases for the old sdhost dtparams. */
-
-/{
-	compatible = "brcm,bcm2835";
-
-	fragment@0 {
-		target = <&sdhost>;
-		frag0: __overlay__ {
-			brcm,overclock-50 = <0>;
-			brcm,pio-limit = <1>;
-		};
-	};
-
-	__overrides__ {
-		overclock_50     = <&frag0>,"brcm,overclock-50:0";
-		force_pio        = <&frag0>,"brcm,force-pio?";
-		pio_limit        = <&frag0>,"brcm,pio-limit:0";
-		debug            = <&frag0>,"brcm,debug?";
-		enable           = <&frag0>,"status";
-		poll_once        = <&frag0>,"non-removable?";
-	};
-};

arch/arm/boot/dts/owl-s500.dtsi

@@ -84,21 +84,21 @@
 		global_timer: timer@b0020200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0xb0020200 0x100>;
-			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_timer: timer@b0020600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xb0020600 0x20>;
-			interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 
 		twd_wdt: wdt@b0020620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0xb0020620 0xe0>;
-			interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/s5pv210.dtsi

@@ -52,34 +52,26 @@
 		};
 	};
 
+	xxti: oscillator-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "xxti";
+		#clock-cells = <0>;
+	};
+
+	xusbxti: oscillator-1 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "xusbxti";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
-		external-clocks {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			xxti: oscillator@0 {
-				compatible = "fixed-clock";
-				reg = <0>;
-				clock-frequency = <0>;
-				clock-output-names = "xxti";
-				#clock-cells = <0>;
-			};
-
-			xusbxti: oscillator@1 {
-				compatible = "fixed-clock";
-				reg = <1>;
-				clock-frequency = <0>;
-				clock-output-names = "xusbxti";
-				#clock-cells = <0>;
-			};
-		};
-
 		onenand: onenand@b0600000 {
 			compatible = "samsung,s5pv210-onenand";
 			reg = <0xb0600000 0x2000>,
@@ -100,19 +92,16 @@
 		};
 
 		clocks: clock-controller@e0100000 {
-			compatible = "samsung,s5pv210-clock", "simple-bus";
+			compatible = "samsung,s5pv210-clock";
 			reg = <0xe0100000 0x10000>;
 			clock-names = "xxti", "xusbxti";
 			clocks = <&xxti>, <&xusbxti>;
 			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+		};
 
-			pmu_syscon: syscon@e0108000 {
-				compatible = "samsung-s5pv210-pmu", "syscon";
-				reg = <0xe0108000 0x8000>;
-			};
+		pmu_syscon: syscon@e0108000 {
+			compatible = "samsung-s5pv210-pmu", "syscon";
+			reg = <0xe0108000 0x8000>;
 		};
 
 		pinctrl0: pinctrl@e0200000 {
@@ -128,35 +117,28 @@
 			};
 		};
 
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges;
+		pdma0: dma@e0900000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0900000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
 
-			pdma0: dma@e0900000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0900000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <19>;
-				clocks = <&clocks CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: dma@e0a00000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0a00000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <20>;
-				clocks = <&clocks CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma1: dma@e0a00000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0a00000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <20>;
+			clocks = <&clocks CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		spi0: spi@e1300000 {
@@ -229,43 +211,36 @@
 			status = "disabled";
 		};
 
-		audio-subsystem {
-			compatible = "samsung,s5pv210-audss", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+		clk_audss: clock-controller@eee10000 {
+			compatible = "samsung,s5pv210-audss-clock";
+			reg = <0xeee10000 0x1000>;
+			clock-names = "hclk", "xxti",
+				      "fout_epll",
+				      "sclk_audio0";
+			clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				 <&clocks FOUT_EPLL>,
+				 <&clocks SCLK_AUDIO0>;
+			#clock-cells = <1>;
+		};
 
-			clk_audss: clock-controller@eee10000 {
-				compatible = "samsung,s5pv210-audss-clock";
-				reg = <0xeee10000 0x1000>;
-				clock-names = "hclk", "xxti",
-						"fout_epll",
-						"sclk_audio0";
-				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
-						<&clocks FOUT_EPLL>,
-						<&clocks SCLK_AUDIO0>;
-				#clock-cells = <1>;
-			};
-
-			i2s0: i2s@eee30000 {
-				compatible = "samsung,s5pv210-i2s";
-				reg = <0xeee30000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <16>;
-				dma-names = "rx", "tx", "tx-sec";
-				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
-				clock-names = "iis",
-						"i2s_opclk0",
-						"i2s_opclk1";
-				clocks = <&clk_audss CLK_I2S>,
-						<&clk_audss CLK_I2S>,
-						<&clk_audss CLK_DOUT_AUD_BUS>;
-				samsung,idma-addr = <0xc0010000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2s0_bus>;
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
+		i2s0: i2s@eee30000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0xeee30000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <16>;
+			dma-names = "rx", "tx", "tx-sec";
+			dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+			clock-names = "iis",
+				      "i2s_opclk0",
+				      "i2s_opclk1";
+			clocks = <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_DOUT_AUD_BUS>;
+			samsung,idma-addr = <0xc0010000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
 		};
 
 		i2s1: i2s@e2100000 {

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -143,7 +143,7 @@
 			trips {
 				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};

arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts

@@ -223,16 +223,16 @@
 };
 
 &reg_dc1sw {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-gmac-phy";
 };
 
 &reg_dcdc1 {
 	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {

arch/arm/configs/bcm2709_defconfig

@@ -416,6 +416,7 @@ CONFIG_CAN=m
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_SLCAN=m
 CONFIG_CAN_MCP251X=m
+CONFIG_CAN_MCP251XFD=m
 CONFIG_CAN_EMS_USB=m
 CONFIG_CAN_GS_USB=m
 CONFIG_BT=m
@@ -984,6 +985,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m
+CONFIG_SND_BCM2708_SOC_PIFI_40=m
 CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=m
 CONFIG_SND_BCM2708_SOC_RPI_DAC=m
 CONFIG_SND_BCM2708_SOC_RPI_PROTO=m
@@ -1005,6 +1007,7 @@ CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m
 CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m
 CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC_PLUS=m
 CONFIG_SND_BCM2708_SOC_ALLO_BOSS_DAC=m
+CONFIG_SND_BCM2708_SOC_ALLO_BOSS2_DAC=m
 CONFIG_SND_BCM2708_SOC_ALLO_DIGIONE=m
 CONFIG_SND_BCM2708_SOC_ALLO_KATANA_DAC=m
 CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m

arch/arm/configs/bcm2711_defconfig

@@ -417,6 +417,7 @@ CONFIG_CAN=m
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_SLCAN=m
 CONFIG_CAN_MCP251X=m
+CONFIG_CAN_MCP251XFD=m
 CONFIG_CAN_EMS_USB=m
 CONFIG_CAN_GS_USB=m
 CONFIG_BT=m
@@ -998,6 +999,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m
+CONFIG_SND_BCM2708_SOC_PIFI_40=m
 CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=m
 CONFIG_SND_BCM2708_SOC_RPI_DAC=m
 CONFIG_SND_BCM2708_SOC_RPI_PROTO=m
@@ -1019,6 +1021,7 @@ CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m
 CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m
 CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC_PLUS=m
 CONFIG_SND_BCM2708_SOC_ALLO_BOSS_DAC=m
+CONFIG_SND_BCM2708_SOC_ALLO_BOSS2_DAC=m
 CONFIG_SND_BCM2708_SOC_ALLO_DIGIONE=m
 CONFIG_SND_BCM2708_SOC_ALLO_KATANA_DAC=m
 CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m

arch/arm/configs/bcmrpi_defconfig

@@ -410,6 +410,7 @@ CONFIG_CAN=m
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_SLCAN=m
 CONFIG_CAN_MCP251X=m
+CONFIG_CAN_MCP251XFD=m
 CONFIG_CAN_EMS_USB=m
 CONFIG_CAN_GS_USB=m
 CONFIG_BT=m
@@ -976,6 +977,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m
+CONFIG_SND_BCM2708_SOC_PIFI_40=m
 CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=m
 CONFIG_SND_BCM2708_SOC_RPI_DAC=m
 CONFIG_SND_BCM2708_SOC_RPI_PROTO=m
@@ -997,6 +999,7 @@ CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m
 CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m
 CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC_PLUS=m
 CONFIG_SND_BCM2708_SOC_ALLO_BOSS_DAC=m
+CONFIG_SND_BCM2708_SOC_ALLO_BOSS2_DAC=m
 CONFIG_SND_BCM2708_SOC_ALLO_DIGIONE=m
 CONFIG_SND_BCM2708_SOC_ALLO_KATANA_DAC=m
 CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m

arch/arm/include/asm/kprobes.h

@@ -44,20 +44,20 @@ int kprobe_exceptions_notify(struct notifier_block *self,
 			     unsigned long val, void *data);
 
 /* optinsn template addresses */
-extern __visible kprobe_opcode_t optprobe_template_entry;
-extern __visible kprobe_opcode_t optprobe_template_val;
-extern __visible kprobe_opcode_t optprobe_template_call;
-extern __visible kprobe_opcode_t optprobe_template_end;
-extern __visible kprobe_opcode_t optprobe_template_sub_sp;
-extern __visible kprobe_opcode_t optprobe_template_add_sp;
-extern __visible kprobe_opcode_t optprobe_template_restore_begin;
-extern __visible kprobe_opcode_t optprobe_template_restore_orig_insn;
-extern __visible kprobe_opcode_t optprobe_template_restore_end;
+extern __visible kprobe_opcode_t optprobe_template_entry[];
+extern __visible kprobe_opcode_t optprobe_template_val[];
+extern __visible kprobe_opcode_t optprobe_template_call[];
+extern __visible kprobe_opcode_t optprobe_template_end[];
+extern __visible kprobe_opcode_t optprobe_template_sub_sp[];
+extern __visible kprobe_opcode_t optprobe_template_add_sp[];
+extern __visible kprobe_opcode_t optprobe_template_restore_begin[];
+extern __visible kprobe_opcode_t optprobe_template_restore_orig_insn[];
+extern __visible kprobe_opcode_t optprobe_template_restore_end[];
 
 #define MAX_OPTIMIZED_LENGTH	4
 #define MAX_OPTINSN_SIZE				\
-	((unsigned long)&optprobe_template_end -	\
-	 (unsigned long)&optprobe_template_entry)
+	((unsigned long)optprobe_template_end -	\
+	 (unsigned long)optprobe_template_entry)
 #define RELATIVEJUMP_SIZE	4
 
 struct arch_optimized_insn {

arch/arm/kernel/hw_breakpoint.c

@@ -680,6 +680,40 @@ static void disable_single_step(struct perf_event *bp)
 	arch_install_hw_breakpoint(bp);
 }
 
+/*
+ * Arm32 hardware does not always report a watchpoint hit address that matches
+ * one of the watchpoints set. It can also report an address "near" the
+ * watchpoint if a single instruction access both watched and unwatched
+ * addresses. There is no straight-forward way, short of disassembling the
+ * offending instruction, to map that address back to the watchpoint. This
+ * function computes the distance of the memory access from the watchpoint as a
+ * heuristic for the likelyhood that a given access triggered the watchpoint.
+ *
+ * See this same function in the arm64 platform code, which has the same
+ * problem.
+ *
+ * The function returns the distance of the address from the bytes watched by
+ * the watchpoint. In case of an exact match, it returns 0.
+ */
+static u32 get_distance_from_watchpoint(unsigned long addr, u32 val,
+					struct arch_hw_breakpoint_ctrl *ctrl)
+{
+	u32 wp_low, wp_high;
+	u32 lens, lene;
+
+	lens = __ffs(ctrl->len);
+	lene = __fls(ctrl->len);
+
+	wp_low = val + lens;
+	wp_high = val + lene;
+	if (addr < wp_low)
+		return wp_low - addr;
+	else if (addr > wp_high)
+		return addr - wp_high;
+	else
+		return 0;
+}
+
 static int watchpoint_fault_on_uaccess(struct pt_regs *regs,
 				       struct arch_hw_breakpoint *info)
 {
@@ -689,23 +723,25 @@ static int watchpoint_fault_on_uaccess(struct pt_regs *regs,
 static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 			       struct pt_regs *regs)
 {
-	int i, access;
-	u32 val, ctrl_reg, alignment_mask;
+	int i, access, closest_match = 0;
+	u32 min_dist = -1, dist;
+	u32 val, ctrl_reg;
 	struct perf_event *wp, **slots;
 	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
 	slots = this_cpu_ptr(wp_on_reg);
 
+	/*
+	 * Find all watchpoints that match the reported address. If no exact
+	 * match is found. Attribute the hit to the closest watchpoint.
+	 */
+	rcu_read_lock();
 	for (i = 0; i < core_num_wrps; ++i) {
-		rcu_read_lock();
-
 		wp = slots[i];
-
 		if (wp == NULL)
-			goto unlock;
+			continue;
 
-		info = counter_arch_bp(wp);
 		/*
 		 * The DFAR is an unknown value on debug architectures prior
 		 * to 7.1. Since we only allow a single watchpoint on these
@@ -714,33 +750,31 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		 */
 		if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
 			BUG_ON(i > 0);
+			info = counter_arch_bp(wp);
 			info->trigger = wp->attr.bp_addr;
 		} else {
-			if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
-				alignment_mask = 0x7;
-			else
-				alignment_mask = 0x3;
-
-			/* Check if the watchpoint value matches. */
-			val = read_wb_reg(ARM_BASE_WVR + i);
-			if (val != (addr & ~alignment_mask))
-				goto unlock;
-
-			/* Possible match, check the byte address select. */
-			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
-			decode_ctrl_reg(ctrl_reg, &ctrl);
-			if (!((1 << (addr & alignment_mask)) & ctrl.len))
-				goto unlock;
-
 			/* Check that the access type matches. */
 			if (debug_exception_updates_fsr()) {
 				access = (fsr & ARM_FSR_ACCESS_MASK) ?
 					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
 				if (!(access & hw_breakpoint_type(wp)))
-					goto unlock;
+					continue;
 			}
 
+			val = read_wb_reg(ARM_BASE_WVR + i);
+			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
+			decode_ctrl_reg(ctrl_reg, &ctrl);
+			dist = get_distance_from_watchpoint(addr, val, &ctrl);
+			if (dist < min_dist) {
+				min_dist = dist;
+				closest_match = i;
+			}
+			/* Is this an exact match? */
+			if (dist != 0)
+				continue;
+
 			/* We have a winner. */
+			info = counter_arch_bp(wp);
 			info->trigger = addr;
 		}
 
@@ -762,13 +796,23 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		 * we can single-step over the watchpoint trigger.
 		 */
 		if (!is_default_overflow_handler(wp))
-			goto unlock;
-
+			continue;
 step:
 		enable_single_step(wp, instruction_pointer(regs));
-unlock:
-		rcu_read_unlock();
 	}
+
+	if (min_dist > 0 && min_dist != -1) {
+		/* No exact match found. */
+		wp = slots[closest_match];
+		info = counter_arch_bp(wp);
+		info->trigger = addr;
+		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
+		perf_bp_event(wp, regs);
+		if (is_default_overflow_handler(wp))
+			enable_single_step(wp, instruction_pointer(regs));
+	}
+
+	rcu_read_unlock();
 }
 
 static void watchpoint_single_step_handler(unsigned long pc)

arch/arm/mach-at91/pm.c

@@ -777,6 +777,7 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 	pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
 	soc_pm.data.pmc = of_iomap(pmc_np, 0);
+	of_node_put(pmc_np);
 	if (!soc_pm.data.pmc) {
 		pr_err("AT91: PM not supported, PMC not found\n");
 		return;

arch/arm/mach-omap2/cpuidle44xx.c

@@ -174,8 +174,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		 */
 		if (mpuss_can_lose_context) {
 			error = cpu_cluster_pm_enter();
-			if (error)
+			if (error) {
+				omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON);
 				goto cpu_cluster_pm_out;
+			}
 		}
 	}
 

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -143,7 +143,7 @@ static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPG(10) */
-		GPIO_LOOKUP("GPG", 10, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -468,9 +468,9 @@ static struct gpiod_lookup_table h1940_mmc_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPF(5) */
-		GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -244,9 +244,9 @@ static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPG(8) */
-		GPIO_LOOKUP("GPG", 8, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOG", 8, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_HIGH),
 		{ },
 	},
 };

arch/arm/mach-s3c24xx/mach-n30.c

@@ -359,9 +359,9 @@ static struct gpiod_lookup_table n30_mci_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPF(1) */
-		GPIO_LOOKUP("GPF", 1, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOF", 1, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPG(10) */
-		GPIO_LOOKUP("GPG", 10, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOG", 10, "wp", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -567,9 +567,9 @@ static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
 	.dev_id = "s3c2410-sdi",
 	.table = {
 		/* Card detect S3C2410_GPF(5) */
-		GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
 		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
 		{ },
 	},
 };

arch/arm/mm/cache-l2x0.c

@@ -1249,20 +1249,28 @@ static void __init l2c310_of_parse(const struct device_node *np,
 
 	ret = of_property_read_u32(np, "prefetch-data", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_DATA_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_DATA_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-data property value is missing\n");
 	}
 
 	ret = of_property_read_u32(np, "prefetch-instr", &val);
 	if (ret == 0) {
-		if (val)
+		if (val) {
 			prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
-		else
+			*aux_val |= L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		} else {
 			prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+			*aux_val &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
+		}
+		*aux_mask &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH;
 	} else if (ret != -EINVAL) {
 		pr_err("L2C-310 OF prefetch-instr property value is missing\n");
 	}

arch/arm/plat-samsung/Kconfig

@@ -241,6 +241,7 @@ config SAMSUNG_PM_DEBUG
 	depends on PM && DEBUG_KERNEL
 	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
 	depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
+	depends on DEBUG_LL && MMU
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
 	  Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>

arch/arm/probes/kprobes/opt-arm.c

@@ -85,21 +85,21 @@ asm (
 			"optprobe_template_end:\n");
 
 #define TMPL_VAL_IDX \
-	((unsigned long *)&optprobe_template_val - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_val - (unsigned long *)optprobe_template_entry)
 #define TMPL_CALL_IDX \
-	((unsigned long *)&optprobe_template_call - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_call - (unsigned long *)optprobe_template_entry)
 #define TMPL_END_IDX \
-	((unsigned long *)&optprobe_template_end - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_end - (unsigned long *)optprobe_template_entry)
 #define TMPL_ADD_SP \
-	((unsigned long *)&optprobe_template_add_sp - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_add_sp - (unsigned long *)optprobe_template_entry)
 #define TMPL_SUB_SP \
-	((unsigned long *)&optprobe_template_sub_sp - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_sub_sp - (unsigned long *)optprobe_template_entry)
 #define TMPL_RESTORE_BEGIN \
-	((unsigned long *)&optprobe_template_restore_begin - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_restore_begin - (unsigned long *)optprobe_template_entry)
 #define TMPL_RESTORE_ORIGN_INSN \
-	((unsigned long *)&optprobe_template_restore_orig_insn - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_restore_orig_insn - (unsigned long *)optprobe_template_entry)
 #define TMPL_RESTORE_END \
-	((unsigned long *)&optprobe_template_restore_end - (unsigned long *)&optprobe_template_entry)
+	((unsigned long *)optprobe_template_restore_end - (unsigned long *)optprobe_template_entry)
 
 /*
  * ARM can always optimize an instruction when using ARM ISA, except
@@ -234,7 +234,7 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *or
 	}
 
 	/* Copy arch-dep-instance from template. */
-	memcpy(code, (unsigned long *)&optprobe_template_entry,
+	memcpy(code, (unsigned long *)optprobe_template_entry,
 			TMPL_END_IDX * sizeof(kprobe_opcode_t));
 
 	/* Adjust buffer according to instruction. */

arch/arm64/Kconfig.platforms

@@ -55,6 +55,7 @@ config ARCH_BCM_IPROC
 config ARCH_BERLIN
 	bool "Marvell Berlin SoC Family"
 	select DW_APB_ICTL
+	select DW_APB_TIMER_OF
 	select GPIOLIB
 	select PINCTRL
 	help

arch/arm64/Makefile

@@ -10,7 +10,7 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-LDFLAGS_vmlinux	:=--no-undefined -X
+LDFLAGS_vmlinux	:=--no-undefined -X -z norelro
 CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
 GZFLAGS		:=-9
 
@@ -18,7 +18,7 @@ ifeq ($(CONFIG_RELOCATABLE), y)
 # Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
 # for relative relocs, since this leads to better Image compression
 # with the relocation offsets always being zero.
-LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext -z norelro \
+LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext \
 			$(call ld-option, --no-apply-dynamic-relocs)
 endif
 

arch/arm64/boot/dts/actions/s700.dtsi

@@ -231,7 +231,7 @@
 
 		pinctrl: pinctrl@e01b0000 {
 			compatible = "actions,s700-pinctrl";
-			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			reg = <0x0 0xe01b0000 0x0 0x100>;
 			clocks = <&cmu CLK_GPIO>;
 			gpio-controller;
 			gpio-ranges = <&pinctrl 0 0 136>;

arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi

@@ -155,8 +155,7 @@
 				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "gp",
 					  "gpmmu",
 					  "pp",
@@ -167,8 +166,7 @@
 					  "pp2",
 					  "ppmmu2",
 					  "pp3",
-					  "ppmmu3",
-					  "pmu";
+					  "ppmmu3";
 			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
 			clock-names = "bus", "core";
 			resets = <&ccu RST_BUS_GPU>;

arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi

@@ -167,6 +167,8 @@
 				hwrng: rng@218 {
 					compatible = "amlogic,meson-rng";
 					reg = <0x0 0x218 0x0 0x4>;
+					clocks = <&clkc CLKID_RNG0>;
+					clock-names = "core";
 				};
 			};
 

arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi

@@ -43,13 +43,13 @@
 
 		white {
 			label = "vim3:white:sys";
-			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		red {
 			label = "vim3:red";
-			gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
 		};
 	};
 

arch/arm64/boot/dts/broadcom/Makefile

@@ -3,14 +3,13 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-a-plus.dtb \
 			      bcm2837-rpi-3-b.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
 			      bcm2837-rpi-cm3-io3.dtb
-dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-2-b.dtb
-dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-2-b.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb
-dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-cm3.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-cm4.dtb
 
 subdir-y	+= northstar2
 subdir-y	+= stingray

arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts

@@ -0,0 +1 @@
+#include "../../../../arm/boot/dts/bcm2711-rpi-400.dts"

arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4.dts

@@ -0,0 +1 @@
+#include "../../../../arm/boot/dts/bcm2711-rpi-cm4.dts"

arch/arm64/boot/dts/freescale/imx8mq.dtsi

@@ -516,6 +516,7 @@
 			gpc: gpc@303a0000 {
 				compatible = "fsl,imx8mq-gpc";
 				reg = <0x303a0000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&gic>;
 				interrupt-controller;
 				#interrupt-cells = <3>;

arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts

@@ -21,6 +21,10 @@
 
 	aliases {
 		ethernet0 = &eth0;
+		/* for dsa slave device */
+		ethernet1 = &switch0port1;
+		ethernet2 = &switch0port2;
+		ethernet3 = &switch0port3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 	};
@@ -147,7 +151,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			switch0port0: port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
@@ -158,19 +162,19 @@
 				};
 			};
 
-			port@1 {
+			switch0port1: port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			switch0port2: port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			switch0port3: port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -175,14 +175,14 @@
 	};
 
 	thermal-zones {
-		cpu0_1-thermal {
+		cpu0-1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens 4>;
 
 			trips {
-				cpu0_1_alert0: trip-point@0 {
+				cpu0_1_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -205,7 +205,7 @@
 			};
 		};
 
-		cpu2_3-thermal {
+		cpu2-3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -934,7 +934,7 @@
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 0>;
+				interrupts = <0>;
 
 				clocks = <&gcc GCC_MDSS_AHB_CLK>,
 					 <&gcc GCC_MDSS_AXI_CLK>,
@@ -966,7 +966,7 @@
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 0>;
+				interrupts = <4>;
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;

arch/arm64/boot/dts/qcom/pm8916.dtsi

@@ -113,7 +113,7 @@
 
 		wcd_codec: codec@f000 {
 			compatible = "qcom,pm8916-wcd-analog-codec";
-			reg = <0xf000 0x200>;
+			reg = <0xf000>;
 			reg-names = "pmic-codec-core";
 			clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
 			clock-names = "mclk";

arch/arm64/boot/dts/renesas/r8a774c0.dtsi

@@ -1212,9 +1212,8 @@
 			reg = <0 0xe6ea0000 0 0x0064>;
 			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 210>;
-			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
-			       <&dmac2 0x43>, <&dmac2 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+			dma-names = "tx", "rx";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 210>;
 			#address-cells = <1>;

arch/arm64/boot/dts/renesas/r8a77990.dtsi

@@ -1168,9 +1168,8 @@
 			reg = <0 0xe6ea0000 0 0x0064>;
 			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 210>;
-			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
-			       <&dmac2 0x43>, <&dmac2 0x42>;
-			dma-names = "tx", "rx", "tx", "rx";
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+			dma-names = "tx", "rx";
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 210>;
 			#address-cells = <1>;

arch/arm64/boot/dts/renesas/ulcb.dtsi

@@ -470,6 +470,7 @@
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	non-removable;
+	full-pwr-cycle-in-suspend;
 	status = "okay";
 };
 

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -419,7 +419,7 @@
 		};
 
 		i2c0: i2c@ff020000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
@@ -429,7 +429,7 @@
 		};
 
 		i2c1: i2c@ff030000 {
-			compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10";
+			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;

arch/arm64/configs/bcm2711_defconfig

@@ -416,6 +416,7 @@ CONFIG_CAN=m
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_SLCAN=m
 CONFIG_CAN_MCP251X=m
+CONFIG_CAN_MCP251XFD=m
 CONFIG_CAN_EMS_USB=m
 CONFIG_CAN_GS_USB=m
 CONFIG_BT=m
@@ -997,6 +998,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m
+CONFIG_SND_BCM2708_SOC_PIFI_40=m
 CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=m
 CONFIG_SND_BCM2708_SOC_RPI_DAC=m
 CONFIG_SND_BCM2708_SOC_RPI_PROTO=m
@@ -1018,6 +1020,7 @@ CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m
 CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m
 CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC_PLUS=m
 CONFIG_SND_BCM2708_SOC_ALLO_BOSS_DAC=m
+CONFIG_SND_BCM2708_SOC_ALLO_BOSS2_DAC=m
 CONFIG_SND_BCM2708_SOC_ALLO_DIGIONE=m
 CONFIG_SND_BCM2708_SOC_ALLO_KATANA_DAC=m
 CONFIG_SND_BCM2708_SOC_FE_PI_AUDIO=m

arch/arm64/configs/bcmrpi3_defconfig

@@ -407,6 +407,7 @@ CONFIG_YAM=m
 CONFIG_CAN=m
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_MCP251X=m
+CONFIG_CAN_MCP251XFD=m
 CONFIG_CAN_EMS_USB=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
@@ -904,6 +905,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI=m
 CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m
+CONFIG_SND_BCM2708_SOC_PIFI_40=m
 CONFIG_SND_BCM2708_SOC_RPI_DAC=m
 CONFIG_SND_BCM2708_SOC_RPI_PROTO=m
 CONFIG_SND_BCM2708_SOC_JUSTBOOM_BOTH=m
@@ -920,6 +922,7 @@ CONFIG_SND_AUDIOSENSE_PI=m
 CONFIG_SND_DIGIDAC1_SOUNDCARD=m
 CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m
 CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m
+CONFIG_SND_BCM2708_SOC_ALLO_BOSS2_DAC=m
 CONFIG_SND_PISOUND=m
 CONFIG_SND_SOC_AD193X_SPI=m
 CONFIG_SND_SOC_AD193X_I2C=m

arch/arm64/include/asm/assembler.h

@@ -462,6 +462,7 @@ USER(\label, ic	ivau, \tmp2)			// invalidate I line PoU
 	.endm
 
 /*
+ * Deprecated! Use SYM_FUNC_{START,START_WEAK,END}_PI instead.
  * Annotate a function as position independent, i.e., safe to be called before
  * the kernel virtual mapping is activated.
  */

arch/arm64/include/asm/kvm_host.h

@@ -209,6 +209,7 @@ enum vcpu_sysreg {
 #define cp14_DBGWCR0	(DBGWCR0_EL1 * 2)
 #define cp14_DBGWVR0	(DBGWVR0_EL1 * 2)
 #define cp14_DBGDCCINT	(MDCCINT_EL1 * 2)
+#define cp14_DBGVCR	(DBGVCR32_EL2 * 2)
 
 #define NR_COPRO_REGS	(NR_SYS_REGS * 2)
 

arch/arm64/include/asm/linkage.h

@@ -4,4 +4,20 @@
 #define __ALIGN		.align 2
 #define __ALIGN_STR	".align 2"
 
+/*
+ * Annotate a function as position independent, i.e., safe to be called before
+ * the kernel virtual mapping is activated.
+ */
+#define SYM_FUNC_START_PI(x)			\
+		SYM_FUNC_START_ALIAS(__pi_##x);	\
+		SYM_FUNC_START(x)
+
+#define SYM_FUNC_START_WEAK_PI(x)		\
+		SYM_FUNC_START_ALIAS(__pi_##x);	\
+		SYM_FUNC_START_WEAK(x)
+
+#define SYM_FUNC_END_PI(x)			\
+		SYM_FUNC_END(x);		\
+		SYM_FUNC_END_ALIAS(__pi_##x)
+
 #endif

arch/arm64/include/asm/numa.h

@@ -25,6 +25,9 @@ const struct cpumask *cpumask_of_node(int node);
 /* Returns a pointer to the cpumask of CPUs on Node 'node'. */
 static inline const struct cpumask *cpumask_of_node(int node)
 {
+	if (node == NUMA_NO_NODE)
+		return cpu_all_mask;
+
 	return node_to_cpumask_map[node];
 }
 #endif

arch/arm64/kernel/cpu_errata.c

@@ -492,6 +492,12 @@ out_printmsg:
 	return required;
 }
 
+static void cpu_enable_ssbd_mitigation(const struct arm64_cpu_capabilities *cap)
+{
+	if (ssbd_state != ARM64_SSBD_FORCE_DISABLE)
+		cap->matches(cap, SCOPE_LOCAL_CPU);
+}
+
 /* known invulnerable cores */
 static const struct midr_range arm64_ssb_cpus[] = {
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
@@ -635,6 +641,12 @@ check_branch_predictor(const struct arm64_cpu_capabilities *entry, int scope)
 	return (need_wa > 0);
 }
 
+static void
+cpu_enable_branch_predictor_hardening(const struct arm64_cpu_capabilities *cap)
+{
+	cap->matches(cap, SCOPE_LOCAL_CPU);
+}
+
 static const __maybe_unused struct midr_range tx2_family_cpus[] = {
 	MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN),
 	MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2),
@@ -894,9 +906,11 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 	},
 #endif
 	{
+		.desc = "Branch predictor hardening",
 		.capability = ARM64_HARDEN_BRANCH_PREDICTOR,
 		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		.matches = check_branch_predictor,
+		.cpu_enable = cpu_enable_branch_predictor_hardening,
 	},
 #ifdef CONFIG_HARDEN_EL2_VECTORS
 	{
@@ -910,6 +924,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.capability = ARM64_SSBD,
 		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		.matches = has_ssbd_mitigation,
+		.cpu_enable = cpu_enable_ssbd_mitigation,
 		.midr_range_list = arm64_ssb_cpus,
 	},
 #ifdef CONFIG_ARM64_ERRATUM_1418040

arch/arm64/kernel/smp.c

@@ -215,6 +215,7 @@ asmlinkage notrace void secondary_start_kernel(void)
 	if (system_uses_irq_prio_masking())
 		init_gic_priority_masking();
 
+	rcu_cpu_starting(cpu);
 	preempt_disable();
 	trace_hardirqs_off();
 

arch/arm64/kernel/topology.c

@@ -35,21 +35,23 @@ void store_cpu_topology(unsigned int cpuid)
 	if (mpidr & MPIDR_UP_BITMASK)
 		return;
 
-	/* Create cpu topology mapping based on MPIDR. */
-	if (mpidr & MPIDR_MT_BITMASK) {
-		/* Multiprocessor system : Multi-threads per core */
-		cpuid_topo->thread_id  = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-		cpuid_topo->core_id    = MPIDR_AFFINITY_LEVEL(mpidr, 1);
-		cpuid_topo->package_id = MPIDR_AFFINITY_LEVEL(mpidr, 2) |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 3) << 8;
-	} else {
-		/* Multiprocessor system : Single-thread per core */
-		cpuid_topo->thread_id  = -1;
-		cpuid_topo->core_id    = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-		cpuid_topo->package_id = MPIDR_AFFINITY_LEVEL(mpidr, 1) |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 2) << 8 |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 3) << 16;
-	}
+	/*
+	 * This would be the place to create cpu topology based on MPIDR.
+	 *
+	 * However, it cannot be trusted to depict the actual topology; some
+	 * pieces of the architecture enforce an artificial cap on Aff0 values
+	 * (e.g. GICv3's ICC_SGI1R_EL1 limits it to 15), leading to an
+	 * artificial cycling of Aff1, Aff2 and Aff3 values. IOW, these end up
+	 * having absolutely no relationship to the actual underlying system
+	 * topology, and cannot be reasonably used as core / package ID.
+	 *
+	 * If the MT bit is set, Aff0 *could* be used to define a thread ID, but
+	 * we still wouldn't be able to obtain a sane core ID. This means we
+	 * need to entirely ignore MPIDR for any topology deduction.
+	 */
+	cpuid_topo->thread_id  = -1;
+	cpuid_topo->core_id    = cpuid;
+	cpuid_topo->package_id = cpu_to_node(cpuid);
 
 	pr_debug("CPU%u: cluster %d core %d thread %d mpidr %#016llx\n",
 		 cpuid, cpuid_topo->package_id, cpuid_topo->core_id,

arch/arm64/kvm/sys_regs.c

@@ -1132,16 +1132,6 @@ static unsigned int sve_visibility(const struct kvm_vcpu *vcpu,
 	return REG_HIDDEN_USER | REG_HIDDEN_GUEST;
 }
 
-/* Visibility overrides for SVE-specific ID registers */
-static unsigned int sve_id_visibility(const struct kvm_vcpu *vcpu,
-				      const struct sys_reg_desc *rd)
-{
-	if (vcpu_has_sve(vcpu))
-		return 0;
-
-	return REG_HIDDEN_USER;
-}
-
 /* Generate the emulated ID_AA64ZFR0_EL1 value exposed to the guest */
 static u64 guest_id_aa64zfr0_el1(const struct kvm_vcpu *vcpu)
 {
@@ -1168,9 +1158,6 @@ static int get_id_aa64zfr0_el1(struct kvm_vcpu *vcpu,
 {
 	u64 val;
 
-	if (WARN_ON(!vcpu_has_sve(vcpu)))
-		return -ENOENT;
-
 	val = guest_id_aa64zfr0_el1(vcpu);
 	return reg_to_user(uaddr, &val, reg->id);
 }
@@ -1183,9 +1170,6 @@ static int set_id_aa64zfr0_el1(struct kvm_vcpu *vcpu,
 	int err;
 	u64 val;
 
-	if (WARN_ON(!vcpu_has_sve(vcpu)))
-		return -ENOENT;
-
 	err = reg_from_user(&val, uaddr, id);
 	if (err)
 		return err;
@@ -1448,7 +1432,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	ID_SANITISED(ID_AA64PFR1_EL1),
 	ID_UNALLOCATED(4,2),
 	ID_UNALLOCATED(4,3),
-	{ SYS_DESC(SYS_ID_AA64ZFR0_EL1), access_id_aa64zfr0_el1, .get_user = get_id_aa64zfr0_el1, .set_user = set_id_aa64zfr0_el1, .visibility = sve_id_visibility },
+	{ SYS_DESC(SYS_ID_AA64ZFR0_EL1), access_id_aa64zfr0_el1, .get_user = get_id_aa64zfr0_el1, .set_user = set_id_aa64zfr0_el1, },
 	ID_UNALLOCATED(4,5),
 	ID_UNALLOCATED(4,6),
 	ID_UNALLOCATED(4,7),
@@ -1746,9 +1730,9 @@ static const struct sys_reg_desc cp14_regs[] = {
 	{ Op1( 0), CRn( 0), CRm( 1), Op2( 0), trap_raz_wi },
 	DBG_BCR_BVR_WCR_WVR(1),
 	/* DBGDCCINT */
-	{ Op1( 0), CRn( 0), CRm( 2), Op2( 0), trap_debug32 },
+	{ Op1( 0), CRn( 0), CRm( 2), Op2( 0), trap_debug32, NULL, cp14_DBGDCCINT },
 	/* DBGDSCRext */
-	{ Op1( 0), CRn( 0), CRm( 2), Op2( 2), trap_debug32 },
+	{ Op1( 0), CRn( 0), CRm( 2), Op2( 2), trap_debug32, NULL, cp14_DBGDSCRext },
 	DBG_BCR_BVR_WCR_WVR(2),
 	/* DBGDTR[RT]Xint */
 	{ Op1( 0), CRn( 0), CRm( 3), Op2( 0), trap_raz_wi },
@@ -1763,7 +1747,7 @@ static const struct sys_reg_desc cp14_regs[] = {
 	{ Op1( 0), CRn( 0), CRm( 6), Op2( 2), trap_raz_wi },
 	DBG_BCR_BVR_WCR_WVR(6),
 	/* DBGVCR */
-	{ Op1( 0), CRn( 0), CRm( 7), Op2( 0), trap_debug32 },
+	{ Op1( 0), CRn( 0), CRm( 7), Op2( 0), trap_debug32, NULL, cp14_DBGVCR },
 	DBG_BCR_BVR_WCR_WVR(7),
 	DBG_BCR_BVR_WCR_WVR(8),
 	DBG_BCR_BVR_WCR_WVR(9),

arch/arm64/lib/clear_page.S

@@ -14,7 +14,7 @@
  * Parameters:
  *	x0 - dest
  */
-ENTRY(clear_page)
+SYM_FUNC_START(clear_page)
 	mrs	x1, dczid_el0
 	and	w1, w1, #0xf
 	mov	x2, #4
@@ -25,5 +25,5 @@ ENTRY(clear_page)
 	tst	x0, #(PAGE_SIZE - 1)
 	b.ne	1b
 	ret
-ENDPROC(clear_page)
+SYM_FUNC_END(clear_page)
 EXPORT_SYMBOL(clear_page)

arch/arm64/lib/clear_user.S

@@ -19,7 +19,7 @@
  *
  * Alignment fixed up by hardware.
  */
-ENTRY(__arch_clear_user)
+SYM_FUNC_START(__arch_clear_user)
 	mov	x2, x1			// save the size for fixup return
 	subs	x1, x1, #8
 	b.mi	2f
@@ -40,7 +40,7 @@ uao_user_alternative 9f, strh, sttrh, wzr, x0, 2
 uao_user_alternative 9f, strb, sttrb, wzr, x0, 0
 5:	mov	x0, #0
 	ret
-ENDPROC(__arch_clear_user)
+SYM_FUNC_END(__arch_clear_user)
 EXPORT_SYMBOL(__arch_clear_user)
 
 	.section .fixup,"ax"

arch/arm64/lib/copy_from_user.S

@@ -53,12 +53,12 @@
 	.endm
 
 end	.req	x5
-ENTRY(__arch_copy_from_user)
+SYM_FUNC_START(__arch_copy_from_user)
 	add	end, x0, x2
 #include "copy_template.S"
 	mov	x0, #0				// Nothing to copy
 	ret
-ENDPROC(__arch_copy_from_user)
+SYM_FUNC_END(__arch_copy_from_user)
 EXPORT_SYMBOL(__arch_copy_from_user)
 
 	.section .fixup,"ax"

arch/arm64/lib/copy_in_user.S

@@ -55,12 +55,12 @@
 
 end	.req	x5
 
-ENTRY(__arch_copy_in_user)
+SYM_FUNC_START(__arch_copy_in_user)
 	add	end, x0, x2
 #include "copy_template.S"
 	mov	x0, #0
 	ret
-ENDPROC(__arch_copy_in_user)
+SYM_FUNC_END(__arch_copy_in_user)
 EXPORT_SYMBOL(__arch_copy_in_user)
 
 	.section .fixup,"ax"

arch/arm64/lib/copy_page.S

@@ -17,7 +17,7 @@
  *	x0 - dest
  *	x1 - src
  */
-ENTRY(copy_page)
+SYM_FUNC_START(copy_page)
 alternative_if ARM64_HAS_NO_HW_PREFETCH
 	// Prefetch three cache lines ahead.
 	prfm	pldl1strm, [x1, #128]
@@ -75,5 +75,5 @@ alternative_else_nop_endif
 	stnp	x16, x17, [x0, #112]
 
 	ret
-ENDPROC(copy_page)
+SYM_FUNC_END(copy_page)
 EXPORT_SYMBOL(copy_page)

arch/arm64/lib/copy_to_user.S

@@ -52,12 +52,12 @@
 	.endm
 
 end	.req	x5
-ENTRY(__arch_copy_to_user)
+SYM_FUNC_START(__arch_copy_to_user)
 	add	end, x0, x2
 #include "copy_template.S"
 	mov	x0, #0
 	ret
-ENDPROC(__arch_copy_to_user)
+SYM_FUNC_END(__arch_copy_to_user)
 EXPORT_SYMBOL(__arch_copy_to_user)
 
 	.section .fixup,"ax"

arch/arm64/lib/crc32.S

@@ -85,17 +85,17 @@ CPU_BE(	rev16		w3, w3		)
 	.endm
 
 	.align		5
-ENTRY(crc32_le)
+SYM_FUNC_START(crc32_le)
 alternative_if_not ARM64_HAS_CRC32
 	b		crc32_le_base
 alternative_else_nop_endif
 	__crc32
-ENDPROC(crc32_le)
+SYM_FUNC_END(crc32_le)
 
 	.align		5
-ENTRY(__crc32c_le)
+SYM_FUNC_START(__crc32c_le)
 alternative_if_not ARM64_HAS_CRC32
 	b		__crc32c_le_base
 alternative_else_nop_endif
 	__crc32		c
-ENDPROC(__crc32c_le)
+SYM_FUNC_END(__crc32c_le)

arch/arm64/lib/memchr.S

@@ -19,7 +19,7 @@
  * Returns:
  *	x0 - address of first occurrence of 'c' or 0
  */
-WEAK(memchr)
+SYM_FUNC_START_WEAK_PI(memchr)
 	and	w1, w1, #0xff
 1:	subs	x2, x2, #1
 	b.mi	2f
@@ -30,5 +30,5 @@ WEAK(memchr)
 	ret
 2:	mov	x0, #0
 	ret
-ENDPIPROC(memchr)
+SYM_FUNC_END_PI(memchr)
 EXPORT_SYMBOL_NOKASAN(memchr)

arch/arm64/lib/memcmp.S

@@ -46,7 +46,7 @@ pos		.req	x11
 limit_wd	.req	x12
 mask		.req	x13
 
-WEAK(memcmp)
+SYM_FUNC_START_WEAK_PI(memcmp)
 	cbz	limit, .Lret0
 	eor	tmp1, src1, src2
 	tst	tmp1, #7
@@ -243,5 +243,5 @@ CPU_LE( rev	data2, data2 )
 .Lret0:
 	mov	result, #0
 	ret
-ENDPIPROC(memcmp)
+SYM_FUNC_END_PI(memcmp)
 EXPORT_SYMBOL_NOKASAN(memcmp)

arch/arm64/lib/memcpy.S

@@ -56,12 +56,11 @@
 	stp \ptr, \regB, [\regC], \val
 	.endm
 
-	.weak memcpy
-ENTRY(__memcpy)
-ENTRY(memcpy)
+SYM_FUNC_START_ALIAS(__memcpy)
+SYM_FUNC_START_WEAK_PI(memcpy)
 #include "copy_template.S"
 	ret
-ENDPIPROC(memcpy)
+SYM_FUNC_END_PI(memcpy)
 EXPORT_SYMBOL(memcpy)
-ENDPROC(__memcpy)
+SYM_FUNC_END_ALIAS(__memcpy)
 EXPORT_SYMBOL(__memcpy)

arch/arm64/lib/memmove.S

@@ -45,9 +45,8 @@ C_h	.req	x12
 D_l	.req	x13
 D_h	.req	x14
 
-	.weak memmove
-ENTRY(__memmove)
-ENTRY(memmove)
+SYM_FUNC_START_ALIAS(__memmove)
+SYM_FUNC_START_WEAK_PI(memmove)
 	cmp	dstin, src
 	b.lo	__memcpy
 	add	tmp1, src, count
@@ -184,7 +183,7 @@ ENTRY(memmove)
 	tst	count, #0x3f
 	b.ne	.Ltail63
 	ret
-ENDPIPROC(memmove)
+SYM_FUNC_END_PI(memmove)
 EXPORT_SYMBOL(memmove)
-ENDPROC(__memmove)
+SYM_FUNC_END_ALIAS(__memmove)
 EXPORT_SYMBOL(__memmove)

arch/arm64/lib/memset.S

@@ -42,9 +42,8 @@ dst		.req	x8
 tmp3w		.req	w9
 tmp3		.req	x9
 
-	.weak memset
-ENTRY(__memset)
-ENTRY(memset)
+SYM_FUNC_START_ALIAS(__memset)
+SYM_FUNC_START_WEAK_PI(memset)
 	mov	dst, dstin	/* Preserve return value.  */
 	and	A_lw, val, #255
 	orr	A_lw, A_lw, A_lw, lsl #8
@@ -203,7 +202,7 @@ ENTRY(memset)
 	ands	count, count, zva_bits_x
 	b.ne	.Ltail_maybe_long
 	ret
-ENDPIPROC(memset)
+SYM_FUNC_END_PI(memset)
 EXPORT_SYMBOL(memset)
-ENDPROC(__memset)
+SYM_FUNC_END_ALIAS(__memset)
 EXPORT_SYMBOL(__memset)