fb: distinguish physical and bus addresses

This is used to stop the I2S driver from breaking
the GPIO setup for other uses of the PCM interface

Documentation/ABI/testing/ima_policy

@@ -23,7 +23,7 @@ Description:
 				 [fowner]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
-			option:	[[appraise_type=]]
+			option:	[[appraise_type=]] [permit_directio]
 
 		base: 	func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]

Documentation/DocBook/media/Makefile

@@ -195,7 +195,7 @@ DVB_DOCUMENTED = \
 #
 
 install_media_images = \
-	$(Q)cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api
+	$(Q)-cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api
 
 $(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64
 	$(Q)base64 -d $< >$@

Documentation/SubmittingPatches

@@ -119,6 +119,20 @@ Example:
 	platform_set_drvdata(), but left the variable "dev" unused,
 	delete it.
 
+If your patch fixes a bug in a specific commit, e.g. you found an issue using
+git-bisect, please use the 'Fixes:' tag with the first 12 characters of the
+SHA-1 ID, and the one line summary.
+Example:
+
+	Fixes: e21d2170f366 ("video: remove unnecessary platform_set_drvdata()")
+
+The following git-config settings can be used to add a pretty format for
+outputting the above style in the git log or git show commands
+
+	[core]
+		abbrev = 12
+	[pretty]
+		fixes = Fixes: %h (\"%s\")
 
 3) Separate your changes.
 
@@ -430,7 +444,7 @@ person it names.  This tag documents that potentially interested parties
 have been included in the discussion
 
 
-14) Using Reported-by:, Tested-by:, Reviewed-by: and Suggested-by:
+14) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes:
 
 If this patch fixes a problem reported by somebody else, consider adding a
 Reported-by: tag to credit the reporter for their contribution.  Please
@@ -485,6 +499,12 @@ idea was not posted in a public forum. That said, if we diligently credit our
 idea reporters, they will, hopefully, be inspired to help us again in the
 future.
 
+A Fixes: tag indicates that the patch fixes an issue in a previous commit. It
+is used to make it easy to determine where a bug originated, which can help
+review a bug fix. This tag also assists the stable kernel team in determining
+which stable kernel versions should receive your fix. This is the preferred
+method for indicating a bug fixed by the patch. See #2 above for more details.
+
 
 15) The canonical patch format
 

Documentation/cpu-freq/intel-pstate.txt

@@ -15,10 +15,13 @@ New sysfs files for controlling P state selection have been added to
 /sys/devices/system/cpu/intel_pstate/
 
       max_perf_pct: limits the maximum P state that will be requested by
-      the driver stated as a percentage of the available performance.
+      the driver stated as a percentage of the available performance. The
+      available (P states) performance may be reduced by the no_turbo
+      setting described below.
 
       min_perf_pct: limits the minimum P state that will be  requested by
-      the driver stated as a percentage of the available performance.
+      the driver stated as a percentage of the max (non-turbo)
+      performance level.
 
       no_turbo: limits the driver to selecting P states below the turbo
       frequency range.

Documentation/debugging-via-ohci1394.txt

@@ -25,9 +25,11 @@ using data transfer rates in the order of 10MB/s or more.
 With most FireWire controllers, memory access is limited to the low 4 GB
 of physical address space.  This can be a problem on IA64 machines where
 memory is located mostly above that limit, but it is rarely a problem on
-more common hardware such as x86, x86-64 and PowerPC.  However, at least
+more common hardware such as x86, x86-64 and PowerPC.
-Agere/LSI FW643e and FW643e2 controllers are known to support access to
+
-physical addresses above 4 GB.
+At least LSI FW643e and FW643e2 controllers are known to support access to
+physical addresses above 4 GB, but this feature is currently not enabled by
+Linux.
 
 Together with a early initialization of the OHCI-1394 controller for debugging,
 this facility proved most useful for examining long debugs logs in the printk
@@ -101,8 +103,9 @@ Step-by-step instructions for using firescope with early OHCI initialization:
    compliant, they are based on TI PCILynx chips and require drivers for Win-
    dows operating systems.
 
-   The mentioned kernel log message contains ">4 GB phys DMA" in case of
+   The mentioned kernel log message contains the string "physUB" if the
-   OHCI-1394 controllers which support accesses above this limit.
+   controller implements a writable Physical Upper Bound register.  This is
+   required for physical DMA above 4 GB (but not utilized by Linux yet).
 
 2) Establish a working FireWire cable connection:
 

Documentation/device-mapper/thin-provisioning.txt

@@ -309,7 +309,10 @@ ii) Status
     error_if_no_space|queue_if_no_space
 	If the pool runs out of data or metadata space, the pool will
 	either queue or error the IO destined to the data device.  The
-	default is to queue the IO until more space is added.
+	default is to queue the IO until more space is added or the
+	'no_space_timeout' expires.  The 'no_space_timeout' dm-thin-pool
+	module parameter can be used to change this timeout -- it
+	defaults to 60 seconds but may be disabled using a value of 0.
 
 iii) Messages
 

Documentation/devicetree/bindings/ata/sata_rcar.txt

@@ -3,7 +3,8 @@
 Required properties:
 - compatible		: should contain one of the following:
 			  - "renesas,sata-r8a7779" for R-Car H1
-			  - "renesas,sata-r8a7790" for R-Car H2
+			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
+			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
 			  - "renesas,sata-r8a7791" for R-Car M2
 - reg			: address and length of the SATA registers;
 - interrupts		: must consist of one interrupt specifier.

Documentation/devicetree/bindings/dma/ti-edma.txt

@@ -29,6 +29,6 @@ edma: edma@49000000 {
 	dma-channels = <64>;
 	ti,edma-regions = <4>;
 	ti,edma-slots = <256>;
-	ti,edma-xbar-event-map = <1 12
+	ti,edma-xbar-event-map = /bits/ 16 <1 12
 					    2 13>;
 };

Documentation/devicetree/bindings/interrupt-controller/interrupts.txt

@@ -4,11 +4,13 @@ Specifying interrupt information for devices
 1) Interrupt client nodes
 -------------------------
 
-Nodes that describe devices which generate interrupts must contain an either an
+Nodes that describe devices which generate interrupts must contain an
-"interrupts" property or an "interrupts-extended" property. These properties
+"interrupts" property, an "interrupts-extended" property, or both. If both are
-contain a list of interrupt specifiers, one per output interrupt. The format of
+present, the latter should take precedence; the former may be provided simply
-the interrupt specifier is determined by the interrupt controller to which the
+for compatibility with software that does not recognize the latter. These
-interrupts are routed; see section 2 below for details.
+properties contain a list of interrupt specifiers, one per output interrupt. The
+format of the interrupt specifier is determined by the interrupt controller to
+which the interrupts are routed; see section 2 below for details.
 
   Example:
 	interrupt-parent = <&intc1>;
@@ -28,10 +30,6 @@ should only be used when a device has multiple interrupt parents.
   Example:
 	interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
 
-A device node may contain either "interrupts" or "interrupts-extended", but not
-both. If both properties are present, then the operating system should log an
-error and use only the data in "interrupts".
-
 2) Interrupt controller nodes
 -----------------------------
 

Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt

@@ -1,7 +1,7 @@
 ADI AXI-SPDIF controller
 
 Required properties:
- - compatible : Must be "adi,axi-spdif-1.00.a"
+ - compatible : Must be "adi,axi-spdif-tx-1.00.a"
  - reg : Must contain SPDIF core's registers location and length
  - clocks : Pairs of phandle and specifier referencing the controller's clocks.
    The controller expects two clocks, the clock used for the AXI interface and

Documentation/devicetree/bindings/spi/efm32-spi.txt

@@ -3,7 +3,7 @@
 Required properties:
 - #address-cells: see spi-bus.txt
 - #size-cells: see spi-bus.txt
-- compatible: should be "efm32,spi"
+- compatible: should be "energymicro,efm32-spi"
 - reg: Offset and length of the register set for the controller
 - interrupts: pair specifying rx and tx irq
 - clocks: phandle to the spi clock
@@ -15,7 +15,7 @@ Example:
 spi1: spi@0x4000c400 { /* USART1 */
 	#address-cells = <1>;
 	#size-cells = <0>;
-	compatible = "efm32,spi";
+	compatible = "energymicro,efm32-spi";
 	reg = <0x4000c400 0x400>;
 	interrupts = <15 16>;
 	clocks = <&cmu 20>;

Documentation/i2c/busses/i2c-i801

@@ -26,6 +26,7 @@ Supported adapters:
   * Intel Wellsburg (PCH)
   * Intel Coleto Creek (PCH)
   * Intel Wildcat Point-LP (PCH)
+  * Intel BayTrail (SOC)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

Documentation/input/elantech.txt

@@ -504,9 +504,12 @@ byte 5:
 * reg_10
 
    bit   7   6   5   4   3   2   1   0
-         0   0   0   0   0   0   0   A
+         0   0   0   0   R   F   T   A
 
          A: 1 = enable absolute tracking
+         T: 1 = enable two finger mode auto correct
+         F: 1 = disable ABS Position Filter
+         R: 1 = enable real hardware resolution
 
 6.2 Native absolute mode 6 byte packet format
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Documentation/ja_JP/HOWTO

@@ -315,7 +315,7 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー
 もし、3.x.y カーネルが存在しない場合には、番号が一番大きい 3.x が
 最新の安定版カーネルです。
 
-3.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
+3.x.y は "stable" チーム <stable@vger.kernel.org> でメンテされており、必
 要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ
 た問題がなければもう少し長くなることもあります。セキュリティ関連の問題
 の場合はこれに対してだいたいの場合、すぐにリリースがされます。

Documentation/ja_JP/stable_kernel_rules.txt

@@ -50,16 +50,16 @@ linux-2.6.29/Documentation/stable_kernel_rules.txt
 
 -stable ツリーにパッチを送付する手続き-
 
- - 上記の規則に従っているかを確認した後に、stable@kernel.org にパッチ
+ - 上記の規則に従っているかを確認した後に、stable@vger.kernel.org にパッチ
    を送る。
  - 送信者はパッチがキューに受け付けられた際には ACK を、却下された場合
    には NAK を受け取る。この反応は開発者たちのスケジュールによって、数
    日かかる場合がある。
  - もし受け取られたら、パッチは他の開発者たちと関連するサブシステムの
    メンテナーによるレビューのために -stable キューに追加される。
- - パッチに stable@kernel.org のアドレスが付加されているときには、それ
+ - パッチに stable@vger.kernel.org のアドレスが付加されているときには、それ
    が Linus のツリーに入る時に自動的に stable チームに email される。
- - セキュリティパッチはこのエイリアス (stable@kernel.org) に送られるべ
+ - セキュリティパッチはこのエイリアス (stable@vger.kernel.org) に送られるべ
    きではなく、代わりに security@kernel.org のアドレスに送られる。
 
 レビューサイクル-

Documentation/lzo.txt

@@ -0,0 +1,164 @@
+
+LZO stream format as understood by Linux's LZO decompressor
+===========================================================
+
+Introduction
+
+  This is not a specification. No specification seems to be publicly available
+  for the LZO stream format. This document describes what input format the LZO
+  decompressor as implemented in the Linux kernel understands. The file subject
+  of this analysis is lib/lzo/lzo1x_decompress_safe.c. No analysis was made on
+  the compressor nor on any other implementations though it seems likely that
+  the format matches the standard one. The purpose of this document is to
+  better understand what the code does in order to propose more efficient fixes
+  for future bug reports.
+
+Description
+
+  The stream is composed of a series of instructions, operands, and data. The
+  instructions consist in a few bits representing an opcode, and bits forming
+  the operands for the instruction, whose size and position depend on the
+  opcode and on the number of literals copied by previous instruction. The
+  operands are used to indicate :
+
+    - a distance when copying data from the dictionary (past output buffer)
+    - a length (number of bytes to copy from dictionary)
+    - the number of literals to copy, which is retained in variable "state"
+      as a piece of information for next instructions.
+
+  Optionally depending on the opcode and operands, extra data may follow. These
+  extra data can be a complement for the operand (eg: a length or a distance
+  encoded on larger values), or a literal to be copied to the output buffer.
+
+  The first byte of the block follows a different encoding from other bytes, it
+  seems to be optimized for literal use only, since there is no dictionary yet
+  prior to that byte.
+
+  Lengths are always encoded on a variable size starting with a small number
+  of bits in the operand. If the number of bits isn't enough to represent the
+  length, up to 255 may be added in increments by consuming more bytes with a
+  rate of at most 255 per extra byte (thus the compression ratio cannot exceed
+  around 255:1). The variable length encoding using #bits is always the same :
+
+       length = byte & ((1 << #bits) - 1)
+       if (!length) {
+               length = ((1 << #bits) - 1)
+               length += 255*(number of zero bytes)
+               length += first-non-zero-byte
+       }
+       length += constant (generally 2 or 3)
+
+  For references to the dictionary, distances are relative to the output
+  pointer. Distances are encoded using very few bits belonging to certain
+  ranges, resulting in multiple copy instructions using different encodings.
+  Certain encodings involve one extra byte, others involve two extra bytes
+  forming a little-endian 16-bit quantity (marked LE16 below).
+
+  After any instruction except the large literal copy, 0, 1, 2 or 3 literals
+  are copied before starting the next instruction. The number of literals that
+  were copied may change the meaning and behaviour of the next instruction. In
+  practice, only one instruction needs to know whether 0, less than 4, or more
+  literals were copied. This is the information stored in the <state> variable
+  in this implementation. This number of immediate literals to be copied is
+  generally encoded in the last two bits of the instruction but may also be
+  taken from the last two bits of an extra operand (eg: distance).
+
+  End of stream is declared when a block copy of distance 0 is seen. Only one
+  instruction may encode this distance (0001HLLL), it takes one LE16 operand
+  for the distance, thus requiring 3 bytes.
+
+  IMPORTANT NOTE : in the code some length checks are missing because certain
+  instructions are called under the assumption that a certain number of bytes
+  follow because it has already been garanteed before parsing the instructions.
+  They just have to "refill" this credit if they consume extra bytes. This is
+  an implementation design choice independant on the algorithm or encoding.
+
+Byte sequences
+
+  First byte encoding :
+
+      0..17   : follow regular instruction encoding, see below. It is worth
+                noting that codes 16 and 17 will represent a block copy from
+                the dictionary which is empty, and that they will always be
+                invalid at this place.
+
+      18..21  : copy 0..3 literals
+                state = (byte - 17) = 0..3  [ copy <state> literals ]
+                skip byte
+
+      22..255 : copy literal string
+                length = (byte - 17) = 4..238
+                state = 4 [ don't copy extra literals ]
+                skip byte
+
+  Instruction encoding :
+
+      0 0 0 0 X X X X  (0..15)
+        Depends on the number of literals copied by the last instruction.
+        If last instruction did not copy any literal (state == 0), this
+        encoding will be a copy of 4 or more literal, and must be interpreted
+        like this :
+
+           0 0 0 0 L L L L  (0..15)  : copy long literal string
+           length = 3 + (L ?: 15 + (zero_bytes * 255) + non_zero_byte)
+           state = 4  (no extra literals are copied)
+
+        If last instruction used to copy between 1 to 3 literals (encoded in
+        the instruction's opcode or distance), the instruction is a copy of a
+        2-byte block from the dictionary within a 1kB distance. It is worth
+        noting that this instruction provides little savings since it uses 2
+        bytes to encode a copy of 2 other bytes but it encodes the number of
+        following literals for free. It must be interpreted like this :
+
+           0 0 0 0 D D S S  (0..15)  : copy 2 bytes from <= 1kB distance
+           length = 2
+           state = S (copy S literals after this block)
+         Always followed by exactly one byte : H H H H H H H H
+           distance = (H << 2) + D + 1
+
+        If last instruction used to copy 4 or more literals (as detected by
+        state == 4), the instruction becomes a copy of a 3-byte block from the
+        dictionary from a 2..3kB distance, and must be interpreted like this :
+
+           0 0 0 0 D D S S  (0..15)  : copy 3 bytes from 2..3 kB distance
+           length = 3
+           state = S (copy S literals after this block)
+         Always followed by exactly one byte : H H H H H H H H
+           distance = (H << 2) + D + 2049
+
+      0 0 0 1 H L L L  (16..31)
+           Copy of a block within 16..48kB distance (preferably less than 10B)
+           length = 2 + (L ?: 7 + (zero_bytes * 255) + non_zero_byte)
+        Always followed by exactly one LE16 :  D D D D D D D D : D D D D D D S S
+           distance = 16384 + (H << 14) + D
+           state = S (copy S literals after this block)
+           End of stream is reached if distance == 16384
+
+      0 0 1 L L L L L  (32..63)
+           Copy of small block within 16kB distance (preferably less than 34B)
+           length = 2 + (L ?: 31 + (zero_bytes * 255) + non_zero_byte)
+        Always followed by exactly one LE16 :  D D D D D D D D : D D D D D D S S
+           distance = D + 1
+           state = S (copy S literals after this block)
+
+      0 1 L D D D S S  (64..127)
+           Copy 3-4 bytes from block within 2kB distance
+           state = S (copy S literals after this block)
+           length = 3 + L
+         Always followed by exactly one byte : H H H H H H H H
+           distance = (H << 3) + D + 1
+
+      1 L L D D D S S  (128..255)
+           Copy 5-8 bytes from block within 2kB distance
+           state = S (copy S literals after this block)
+           length = 5 + L
+         Always followed by exactly one byte : H H H H H H H H
+           distance = (H << 3) + D + 1
+
+Authors
+
+  This document was written by Willy Tarreau <w@1wt.eu> on 2014/07/19 during an
+  analysis of the decompression code available in Linux 3.16-rc5. The code is
+  tricky, it is possible that this document contains mistakes or that a few
+  corner cases were overlooked. In any case, please report any doubt, fix, or
+  proposed updates to the author(s) so that the document can be updated.

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -2026,8 +2026,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV66/AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X, DS, Essence ST (Deluxe), Essence STX,
+    i.e., Xonar D1, DX, D2, D2X, DS, DSX, Essence ST (Deluxe),
-    HDAV1.3 (Deluxe), and HDAV1.3 Slim.
+    Essence STX (II), HDAV1.3 (Deluxe), and HDAV1.3 Slim.
 
     This module supports autoprobe and multiple cards.
 

Documentation/stable_kernel_rules.txt

@@ -29,6 +29,9 @@ Rules on what kind of patches are accepted, and which ones are not, into the
 
 Procedure for submitting patches to the -stable tree:
 
+ - If the patch covers files in net/ or drivers/net please follow netdev stable
+   submission guidelines as described in
+   Documentation/networking/netdev-FAQ.txt
  - Send the patch, after verifying that it follows the above rules, to
    stable@vger.kernel.org.  You must note the upstream commit ID in the
    changelog of your submission, as well as the kernel version you wish

Documentation/sysctl/kernel.txt

@@ -317,6 +317,7 @@ for more than this value report a warning.
 This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
 0: means infinite timeout - no checking done.
+Possible values to set are in range {0..LONG_MAX/HZ}.
 
 ==============================================================
 

Documentation/sysctl/vm.txt

@@ -681,7 +681,8 @@ The batch value of each per cpu pagelist is also updated as a result.  It is
 set to pcp->high/4.  The upper limit of batch is (PAGE_SHIFT * 8)
 
 The initial value is zero.  Kernel does not use this value at boot time to set
-the high water marks for each per cpu page list.
+the high water marks for each per cpu page list.  If the user writes '0' to this
+sysctl, it will revert to this default behavior.
 
 ==============================================================
 

Documentation/video4linux/bcm2835-v4l2.txt

@@ -0,0 +1,60 @@
+
+BCM2835 (aka Raspberry Pi) V4L2 driver
+======================================
+
+1. Copyright
+============
+
+Copyright © 2013 Raspberry Pi (Trading) Ltd.
+
+2. License
+==========
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+3. Quick Start
+==============
+
+You need a version 1.0 or later of v4l2-ctl, available from:
+	git://git.linuxtv.org/v4l-utils.git
+
+$ sudo modprobe bcm2835-v4l2
+
+Turn on the overlay:
+
+$ v4l2-ctl --overlay=1
+
+Turn off the overlay:
+
+$ v4l2-ctl --overlay=0
+
+Set the capture format for video:
+
+$ v4l2-ctl  --set-fmt-video=width=1920,height=1088,pixelformat=4
+
+(Note: 1088 not 1080).
+
+Capture:
+
+$ v4l2-ctl --stream-mmap=3 --stream-count=100 --stream-to=somefile.h264
+
+Stills capture:
+
+$ v4l2-ctl  --set-fmt-video=width=2592,height=1944,pixelformat=3
+$ v4l2-ctl --stream-mmap=3 --stream-count=1 --stream-to=somefile.jpg
+
+List of available formats:
+
+$ v4l2-ctl --list-formats

Documentation/video4linux/gspca.txt

@@ -55,6 +55,7 @@ zc3xx		0458:700f	Genius VideoCam Web V2
 sonixj		0458:7025	Genius Eye 311Q
 sn9c20x		0458:7029	Genius Look 320s
 sonixj		0458:702e	Genius Slim 310 NB
+sn9c20x		0458:7045	Genius Look 1320 V2
 sn9c20x		0458:704a	Genius Slim 1320
 sn9c20x		0458:704c	Genius i-Look 1321
 sn9c20x		045e:00f4	LifeCam VX-6000 (SN9C20x + OV9650)

Documentation/virtual/kvm/mmu.txt

@@ -425,6 +425,20 @@ fault through the slow path.
 Since only 19 bits are used to store generation-number on mmio spte, all
 pages are zapped when there is an overflow.
 
+Unfortunately, a single memory access might access kvm_memslots(kvm) multiple
+times, the last one happening when the generation number is retrieved and
+stored into the MMIO spte.  Thus, the MMIO spte might be created based on
+out-of-date information, but with an up-to-date generation number.
+
+To avoid this, the generation number is incremented again after synchronize_srcu
+returns; thus, the low bit of kvm_memslots(kvm)->generation is only 1 during a
+memslot update, while some SRCU readers might be using the old copy.  We do not
+want to use an MMIO sptes created with an odd generation number, and we can do
+this without losing a bit in the MMIO spte.  The low bit of the generation
+is not stored in MMIO spte, and presumed zero when it is extracted out of the
+spte.  If KVM is unlucky and creates an MMIO spte while the low bit is 1,
+the next access to the spte will always be a cache miss.
+
 
 Further reading
 ===============

Documentation/vm/hwpoison.txt

@@ -84,6 +84,11 @@ PR_MCE_KILL
 		PR_MCE_KILL_EARLY: Early kill
 		PR_MCE_KILL_LATE:  Late kill
 		PR_MCE_KILL_DEFAULT: Use system global default
+	Note that if you want to have a dedicated thread which handles
+	the SIGBUS(BUS_MCEERR_AO) on behalf of the process, you should
+	call prctl(PR_MCE_KILL_EARLY) on the designated thread. Otherwise,
+	the SIGBUS is sent to the main thread.
+
 PR_MCE_KILL_GET
 	return current mode
 

Documentation/x86/x86_64/mm.txt

@@ -12,6 +12,8 @@ ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
 ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
 ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
 ... unused hole ...
+ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
+... unused hole ...
 ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
 ffffffffa0000000 - ffffffffff5fffff (=1525 MB) module mapping space
 ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls

Documentation/zh_CN/HOWTO

@@ -237,7 +237,7 @@ kernel.org网站的pub/linux/kernel/v2.6/目录下找到它。它的开发遵循
 如果没有2.6.x.y版本内核存在，那么最新的2.6.x版本内核就相当于是当前的稳定
 版内核。
 
-2.6.x.y版本由“稳定版”小组（邮件地址<stable@kernel.org>）维护，一般隔周发
+2.6.x.y版本由“稳定版”小组（邮件地址<stable@vger.kernel.org>）维护，一般隔周发
 布新版本。
 
 内核源码中的Documentation/stable_kernel_rules.txt文件具体描述了可被稳定

Documentation/zh_CN/stable_kernel_rules.txt

@@ -42,7 +42,7 @@ Documentation/stable_kernel_rules.txt 的中文翻译
 
 向稳定版代码树提交补丁的过程：
 
-  - 在确认了补丁符合以上的规则后，将补丁发送到stable@kernel.org。
+  - 在确认了补丁符合以上的规则后，将补丁发送到stable@vger.kernel.org。
   - 如果补丁被接受到队列里，发送者会收到一个ACK回复，如果没有被接受，收
     到的是NAK回复。回复需要几天的时间，这取决于开发者的时间安排。
   - 被接受的补丁会被加到稳定版本队列里，等待其他开发者的审查。

Makefile

@@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 14
-SUBLEVEL = 0
+SUBLEVEL = 28
 EXTRAVERSION =
-NAME = Shuffling Zombie Juror
+NAME = Remembering Coco
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -639,6 +639,8 @@ KBUILD_CFLAGS	+= -fomit-frame-pointer
 endif
 endif
 
+KBUILD_CFLAGS   += $(call cc-option, -fno-var-tracking-assignments)
+
 ifdef CONFIG_DEBUG_INFO
 KBUILD_CFLAGS	+= -g
 KBUILD_AFLAGS	+= -Wa,--gdwarf-2

arch/arc/boot/dts/nsimosci.dts

@@ -11,13 +11,16 @@
 
 / {
 	compatible = "snps,nsimosci";
-	clock-frequency = <80000000>;	/* 80 MHZ */
+	clock-frequency = <20000000>;	/* 20 MHZ */
 	#address-cells = <1>;
 	#size-cells = <1>;
 	interrupt-parent = <&intc>;
 
 	chosen {
-		bootargs = "console=tty0 consoleblank=0";
+		/* this is for console on PGU */
+		/* bootargs = "console=tty0 consoleblank=0"; */
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug";
 	};
 
 	aliases {
@@ -44,15 +47,14 @@
 		};
 
 		uart0: serial@c0000000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "ns8250";
 			reg = <0xc0000000 0x2000>;
 			interrupts = <11>;
-			#clock-frequency = <80000000>;
 			clock-frequency = <3686400>;
 			baud = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			status = "okay";
+			no-loopback-test = <1>;
 		};
 
 		pgu0: pgu@c9000000 {

arch/arc/configs/nsimosci_defconfig

@@ -54,6 +54,7 @@ CONFIG_SERIO_ARC_PS2=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set

arch/arc/include/asm/cache.h

@@ -55,4 +55,31 @@ extern void read_decode_cache_bcr(void);
 
 #endif	/* !__ASSEMBLY__ */
 
+/* Instruction cache related Auxiliary registers */
+#define ARC_REG_IC_BCR		0x77	/* Build Config reg */
+#define ARC_REG_IC_IVIC		0x10
+#define ARC_REG_IC_CTRL		0x11
+#define ARC_REG_IC_IVIL		0x19
+#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4)
+#define ARC_REG_IC_PTAG		0x1E
+#endif
+
+/* Bit val in IC_CTRL */
+#define IC_CTRL_CACHE_DISABLE   0x1
+
+/* Data cache related Auxiliary registers */
+#define ARC_REG_DC_BCR		0x72	/* Build Config reg */
+#define ARC_REG_DC_IVDC		0x47
+#define ARC_REG_DC_CTRL		0x48
+#define ARC_REG_DC_IVDL		0x4A
+#define ARC_REG_DC_FLSH		0x4B
+#define ARC_REG_DC_FLDL		0x4C
+#if defined(CONFIG_ARC_MMU_V3) || defined (CONFIG_ARC_MMU_V4)
+#define ARC_REG_DC_PTAG		0x5C
+#endif
+
+/* Bit val in DC_CTRL */
+#define DC_CTRL_INV_MODE_FLUSH  0x40
+#define DC_CTRL_FLUSH_STATUS    0x100
+
 #endif /* _ASM_CACHE_H */

arch/arc/include/asm/kgdb.h

@@ -19,7 +19,7 @@
  * register API yet */
 #undef DBG_MAX_REG_NUM
 
-#define GDB_MAX_REGS		39
+#define GDB_MAX_REGS		87
 
 #define BREAK_INSTR_SIZE	2
 #define CACHE_FLUSH_IS_SAFE	1
@@ -33,23 +33,27 @@ static inline void arch_kgdb_breakpoint(void)
 
 extern void kgdb_trap(struct pt_regs *regs);
 
-enum arc700_linux_regnums {
+/* This is the numbering of registers according to the GDB. See GDB's
+ * arc-tdep.h for details.
+ *
+ * Registers are ordered for GDB 7.5. It is incompatible with GDB 6.8. */
+enum arc_linux_regnums {
 	_R0		= 0,
 	_R1, _R2, _R3, _R4, _R5, _R6, _R7, _R8, _R9, _R10, _R11, _R12, _R13,
 	_R14, _R15, _R16, _R17, _R18, _R19, _R20, _R21, _R22, _R23, _R24,
 	_R25, _R26,
-	_BTA		= 27,
+	_FP		= 27,
-	_LP_START	= 28,
+	__SP		= 28,
-	_LP_END		= 29,
+	_R30		= 30,
-	_LP_COUNT	= 30,
+	_BLINK		= 31,
-	_STATUS32	= 31,
+	_LP_COUNT	= 60,
-	_BLINK		= 32,
+	_STOP_PC	= 64,
-	_FP		= 33,
+	_RET		= 64,
-	__SP		= 34,
+	_LP_START	= 65,
-	_EFA		= 35,
+	_LP_END		= 66,
-	_RET		= 36,
+	_STATUS32	= 67,
-	_ORIG_R8	= 37,
+	_ECR		= 76,
-	_STOP_PC	= 38
+	_BTA		= 82,
 };
 
 #else

arch/arc/include/uapi/asm/ptrace.h

@@ -11,6 +11,7 @@
 #ifndef _UAPI__ASM_ARC_PTRACE_H
 #define _UAPI__ASM_ARC_PTRACE_H
 
+#define PTRACE_GET_THREAD_AREA	25
 
 #ifndef __ASSEMBLY__
 /*

arch/arc/kernel/entry.S

@@ -614,11 +614,13 @@ resume_user_mode_begin:
 
 resume_kernel_mode:
 
-#ifdef CONFIG_PREEMPT
+	; Disable Interrupts from this point on
-
+	; CONFIG_PREEMPT: This is a must for preempt_schedule_irq()
-	; This is a must for preempt_schedule_irq()
+	; !CONFIG_PREEMPT: To ensure restore_regs is intr safe
 	IRQ_DISABLE	r9
 
+#ifdef CONFIG_PREEMPT
+
 	; Can't preempt if preemption disabled
 	GET_CURR_THR_INFO_FROM_SP   r10
 	ld  r8, [r10, THREAD_INFO_PREEMPT_COUNT]

arch/arc/kernel/head.S

@@ -12,10 +12,42 @@
  *      to skip certain things during boot on simulator
  */
 
+#include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/entry.h>
-#include <linux/linkage.h>
 #include <asm/arcregs.h>
+#include <asm/cache.h>
+
+.macro CPU_EARLY_SETUP
+
+	; Setting up Vectror Table (in case exception happens in early boot
+	sr	@_int_vec_base_lds, [AUX_INTR_VEC_BASE]
+
+	; Disable I-cache/D-cache if kernel so configured
+	lr	r5, [ARC_REG_IC_BCR]
+	breq    r5, 0, 1f		; I$ doesn't exist
+	lr	r5, [ARC_REG_IC_CTRL]
+#ifdef CONFIG_ARC_HAS_ICACHE
+	bclr	r5, r5, 0		; 0 - Enable, 1 is Disable
+#else
+	bset	r5, r5, 0		; I$ exists, but is not used
+#endif
+	sr	r5, [ARC_REG_IC_CTRL]
+
+1:
+	lr	r5, [ARC_REG_DC_BCR]
+	breq    r5, 0, 1f		; D$ doesn't exist
+	lr	r5, [ARC_REG_DC_CTRL]
+	bclr	r5, r5, 6		; Invalidate (discard w/o wback)
+#ifdef CONFIG_ARC_HAS_DCACHE
+	bclr	r5, r5, 0		; Enable (+Inv)
+#else
+	bset	r5, r5, 0		; Disable (+Inv)
+#endif
+	sr	r5, [ARC_REG_DC_CTRL]
+
+1:
+.endm
 
 	.cpu A7
 
@@ -24,13 +56,13 @@
 	.globl stext
 stext:
 	;-------------------------------------------------------------------
-	; Don't clobber r0-r4 yet. It might have bootloader provided info
+	; Don't clobber r0-r2 yet. It might have bootloader provided info
 	;-------------------------------------------------------------------
 
-	sr	@_int_vec_base_lds, [AUX_INTR_VEC_BASE]
+	CPU_EARLY_SETUP
 
 #ifdef CONFIG_SMP
-	; Only Boot (Master) proceeds. Others wait in platform dependent way
+	; Ensure Boot (Master) proceeds. Others wait in platform dependent way
 	;	IDENTITY Reg [ 3  2  1  0 ]
 	;	(cpu-id)             ^^^	=> Zero for UP ARC700
 	;					=> #Core-ID if SMP (Master 0)
@@ -39,7 +71,8 @@ stext:
 	; need to make sure only boot cpu takes this path.
 	GET_CPU_ID  r5
 	cmp	r5, 0
-	jnz	arc_platform_smp_wait_to_boot
+	mov.ne	r0, r5
+	jne	arc_platform_smp_wait_to_boot
 #endif
 	; Clear BSS before updating any globals
 	; XXX: use ZOL here
@@ -89,7 +122,7 @@ stext:
 
 first_lines_of_secondary:
 
-	sr	@_int_vec_base_lds, [AUX_INTR_VEC_BASE]
+	CPU_EARLY_SETUP
 
 	; setup per-cpu idle task as "current" on this CPU
 	ld	r0, [@secondary_idle_tsk]

arch/arc/kernel/ptrace.c

@@ -146,6 +146,10 @@ long arch_ptrace(struct task_struct *child, long request,
 	pr_debug("REQ=%ld: ADDR =0x%lx, DATA=0x%lx)\n", request, addr, data);
 
 	switch (request) {
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(task_thread_info(child)->thr_ptr,
+			       (unsigned long __user *)data);
+		break;
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;

arch/arc/mm/cache_arc700.c

@@ -73,37 +73,9 @@
 #include <asm/cachectl.h>
 #include <asm/setup.h>
 
-/* Instruction cache related Auxiliary registers */
+char *arc_cache_mumbojumbo(int c, char *buf, int len)
-#define ARC_REG_IC_BCR		0x77	/* Build Config reg */
-#define ARC_REG_IC_IVIC		0x10
-#define ARC_REG_IC_CTRL		0x11
-#define ARC_REG_IC_IVIL		0x19
-#if (CONFIG_ARC_MMU_VER > 2)
-#define ARC_REG_IC_PTAG		0x1E
-#endif
-
-/* Bit val in IC_CTRL */
-#define IC_CTRL_CACHE_DISABLE   0x1
-
-/* Data cache related Auxiliary registers */
-#define ARC_REG_DC_BCR		0x72	/* Build Config reg */
-#define ARC_REG_DC_IVDC		0x47
-#define ARC_REG_DC_CTRL		0x48
-#define ARC_REG_DC_IVDL		0x4A
-#define ARC_REG_DC_FLSH		0x4B
-#define ARC_REG_DC_FLDL		0x4C
-#if (CONFIG_ARC_MMU_VER > 2)
-#define ARC_REG_DC_PTAG		0x5C
-#endif
-
-/* Bit val in DC_CTRL */
-#define DC_CTRL_INV_MODE_FLUSH  0x40
-#define DC_CTRL_FLUSH_STATUS    0x100
-
-char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
 {
 	int n = 0;
-	unsigned int c = smp_processor_id();
 
 #define PR_CACHE(p, enb, str)						\
 {									\
@@ -169,44 +141,33 @@ void read_decode_cache_bcr(void)
  */
 void arc_cache_init(void)
 {
-	unsigned int cpu = smp_processor_id();
+	unsigned int __maybe_unused cpu = smp_processor_id();
-	struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
+	struct cpuinfo_arc_cache __maybe_unused *ic, __maybe_unused *dc;
-	struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
-	unsigned int dcache_does_alias, temp;
 	char str[256];
 
 	printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
 
-	if (!ic->ver)
-		goto chk_dc;
-
 #ifdef CONFIG_ARC_HAS_ICACHE
-	/* 1. Confirm some of I-cache params which Linux assumes */
+	ic = &cpuinfo_arc700[cpu].icache;
+	if (ic->ver) {
 		if (ic->line_len != L1_CACHE_BYTES)
-		panic("Cache H/W doesn't match kernel Config");
+			panic("ICache line [%d] != kernel Config [%d]",
+			      ic->line_len, L1_CACHE_BYTES);
 
 		if (ic->ver != CONFIG_ARC_MMU_VER)
-		panic("Cache ver doesn't match MMU ver\n");
+			panic("Cache ver [%d] doesn't match MMU ver [%d]\n",
+			      ic->ver, CONFIG_ARC_MMU_VER);
+	}
 #endif
 
-	/* Enable/disable I-Cache */
-	temp = read_aux_reg(ARC_REG_IC_CTRL);
-
-#ifdef CONFIG_ARC_HAS_ICACHE
-	temp &= ~IC_CTRL_CACHE_DISABLE;
-#else
-	temp |= IC_CTRL_CACHE_DISABLE;
-#endif
-
-	write_aux_reg(ARC_REG_IC_CTRL, temp);
-
-chk_dc:
-	if (!dc->ver)
-		return;
-
 #ifdef CONFIG_ARC_HAS_DCACHE
+	dc = &cpuinfo_arc700[cpu].dcache;
+	if (dc->ver) {
+		unsigned int dcache_does_alias;
+
 		if (dc->line_len != L1_CACHE_BYTES)
-		panic("Cache H/W doesn't match kernel Config");
+			panic("DCache line [%d] != kernel Config [%d]",
+			      dc->line_len, L1_CACHE_BYTES);
 
 		/* check for D-Cache aliasing */
 		dcache_does_alias = (dc->sz / dc->assoc) > PAGE_SIZE;
@@ -215,26 +176,8 @@ chk_dc:
 			panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
 		else if (!dcache_does_alias && cache_is_vipt_aliasing())
 			panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n");
+	}
 #endif
-
-	/* Set the default Invalidate Mode to "simpy discard dirty lines"
-	 *  as this is more frequent then flush before invalidate
-	 * Ofcourse we toggle this default behviour when desired
-	 */
-	temp = read_aux_reg(ARC_REG_DC_CTRL);
-	temp &= ~DC_CTRL_INV_MODE_FLUSH;
-
-#ifdef CONFIG_ARC_HAS_DCACHE
-	/* Enable D-Cache: Clear Bit 0 */
-	write_aux_reg(ARC_REG_DC_CTRL, temp & ~IC_CTRL_CACHE_DISABLE);
-#else
-	/* Flush D cache */
-	write_aux_reg(ARC_REG_DC_FLSH, 0x1);
-	/* Disable D cache */
-	write_aux_reg(ARC_REG_DC_CTRL, temp | IC_CTRL_CACHE_DISABLE);
-#endif
-
-	return;
 }
 
 #define OP_INV		0x1
@@ -254,12 +197,16 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
 
 	if (cacheop == OP_INV_IC) {
 		aux_cmd = ARC_REG_IC_IVIL;
+#if (CONFIG_ARC_MMU_VER > 2)
 		aux_tag = ARC_REG_IC_PTAG;
+#endif
 	}
 	else {
 		/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
 		aux_cmd = cacheop & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
+#if (CONFIG_ARC_MMU_VER > 2)
 		aux_tag = ARC_REG_DC_PTAG;
+#endif
 	}
 
 	/* Ensure we properly floor/ceil the non-line aligned/sized requests

arch/arc/plat-arcfpga/Kconfig

@@ -33,7 +33,6 @@ config ISS_SMP_EXTN
 	bool "ARC SMP Extensions (ISS Models only)"
 	default n
 	depends on SMP
-	select ARC_HAS_COH_RTSC
 	help
 	  SMP Extensions to ARC700, in a "simulation only" Model, supported in
 	  ARC ISS (Instruction Set Simulator).

arch/arm/Kconfig

@@ -6,6 +6,7 @@ config ARM
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANT_IPC_PARSE_VERSION
@@ -379,6 +380,24 @@ config ARCH_AT91
 	  This enables support for systems based on Atmel
 	  AT91RM9200 and AT91SAM9* processors.
 
+config ARCH_BCM2708
+	bool "Broadcom BCM2708 family"
+	select CPU_V6
+	select ARM_AMBA
+	select HAVE_CLK
+	select HAVE_SCHED_CLOCK
+	select NEED_MACH_GPIO_H
+	select NEED_MACH_MEMORY_H
+	select CLKDEV_LOOKUP
+	select ARCH_HAS_CPUFREQ
+	select GENERIC_CLOCKEVENTS
+	select ARM_ERRATA_411920
+	select MACH_BCM2708
+	select VC4
+	select FIQ
+	help
+	  This enables support for Broadcom BCM2708 boards.
+
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
@@ -898,7 +917,7 @@ config ARCH_MULTI_V5
 	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
 	depends on !ARCH_MULTI_V6_V7
 	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
 		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
 		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
 
@@ -1053,6 +1072,7 @@ source "arch/arm/mach-virt/Kconfig"
 source "arch/arm/mach-vt8500/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
+source "arch/arm/mach-bcm2708/Kconfig"
 
 source "arch/arm/mach-zynq/Kconfig"
 

arch/arm/Kconfig.debug

@@ -920,6 +920,14 @@ choice
 		  options; the platform specific options are deprecated
 		  and will be soon removed.
 
+	config DEBUG_BCM2708_UART0
+		bool "Broadcom BCM2708 UART0 (PL011)"
+		depends on MACH_BCM2708
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
 endchoice
 
 config DEBUG_EXYNOS_UART

arch/arm/Makefile

@@ -143,6 +143,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_AT91)		+= at91
 machine-$(CONFIG_ARCH_BCM)		+= bcm
+machine-$(CONFIG_ARCH_BCM2708)		+= bcm2708
 machine-$(CONFIG_ARCH_BCM2835)		+= bcm2835
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x

arch/arm/boot/compressed/head.S

@@ -400,8 +400,7 @@ dtb_check_done:
 		add	sp, sp, r6
 #endif
 
-		tst	r4, #1
+		bl	cache_clean_flush
-		bleq	cache_clean_flush
 
 		adr	r0, BSYM(restart)
 		add	r0, r0, r6
@@ -1050,6 +1049,8 @@ cache_clean_flush:
 		b	call_cache_fn
 
 __armv4_mpu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r2, #1
 		mov	r3, #0
 		mcr	p15, 0, ip, c7, c6, 0	@ invalidate D cache
@@ -1067,6 +1068,8 @@ __armv4_mpu_cache_flush:
 		mov	pc, lr
 		
 __fa526_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c14, 0	@ clean and invalidate D cache
 		mcr	p15, 0, r1, c7, c5, 0	@ flush I cache
@@ -1075,13 +1078,16 @@ __fa526_cache_flush:
 
 __armv6_mmu_cache_flush:
 		mov	r1, #0
-		mcr	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
+		tst	r4, #1
+		mcreq	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
 		mcr	p15, 0, r1, c7, c5, 0	@ invalidate I+BTB
-		mcr	p15, 0, r1, c7, c15, 0	@ clean+invalidate unified
+		mcreq	p15, 0, r1, c7, c15, 0	@ clean+invalidate unified
 		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
 		mov	pc, lr
 
 __armv7_mmu_cache_flush:
+		tst	r4, #1
+		bne	iflush
 		mrc	p15, 0, r10, c0, c1, 5	@ read ID_MMFR1
 		tst	r10, #0xf << 16		@ hierarchical cache (ARMv7)
 		mov	r10, #0
@@ -1142,6 +1148,8 @@ iflush:
 		mov	pc, lr
 
 __armv5tej_mmu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 1:		mrc	p15, 0, r15, c7, c14, 3	@ test,clean,invalidate D cache
 		bne	1b
 		mcr	p15, 0, r0, c7, c5, 0	@ flush I cache
@@ -1149,6 +1157,8 @@ __armv5tej_mmu_cache_flush:
 		mov	pc, lr
 
 __armv4_mmu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r2, #64*1024		@ default: 32K dcache size (*2)
 		mov	r11, #32		@ default: 32 byte line size
 		mrc	p15, 0, r3, c0, c0, 1	@ read cache type
@@ -1182,6 +1192,8 @@ no_cache_id:
 
 __armv3_mmu_cache_flush:
 __armv3_mpu_cache_flush:
+		tst	r4, #1
+		movne	pc, lr
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -183,7 +183,7 @@
 &usb {
 	status = "okay";
 
-	control@44e10000 {
+	control@44e10620 {
 		status = "okay";
 	};
 
@@ -204,7 +204,7 @@
 		dr_mode = "host";
 	};
 
-	dma-controller@07402000  {
+	dma-controller@47402000  {
 		status = "okay";
 	};
 };

arch/arm/boot/dts/am335x-evm.dts

@@ -325,7 +325,7 @@
 &usb {
 	status = "okay";
 
-	control@44e10000 {
+	control@44e10620 {
 		status = "okay";
 	};
 
@@ -346,7 +346,7 @@
 		dr_mode = "host";
 	};
 
-	dma-controller@07402000  {
+	dma-controller@47402000  {
 		status = "okay";
 	};
 };

arch/arm/boot/dts/am335x-evmsk.dts

@@ -334,7 +334,7 @@
 &usb {
 	status = "okay";
 
-	control@44e10000 {
+	control@44e10620 {
 		status = "okay";
 	};
 

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -202,7 +202,7 @@
 &usb {
 	status = "okay";
 
-	control@44e10000 {
+	control@44e10620 {
 		status = "okay";
 	};
 
@@ -223,7 +223,7 @@
 		dr_mode = "host";
 	};
 
-	dma-controller@07402000  {
+	dma-controller@47402000  {
 		status = "okay";
 	};
 };

arch/arm/boot/dts/am33xx.dtsi

@@ -140,7 +140,7 @@
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
 			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
+				<0x44e10f90 0x40>;
 			interrupts = <12 13 14>;
 			#dma-cells = <1>;
 			dma-channels = <64>;
@@ -448,7 +448,7 @@
 			ti,hwmods = "usb_otg_hs";
 			status = "disabled";
 
-			usb_ctrl_mod: control@44e10000 {
+			usb_ctrl_mod: control@44e10620 {
 				compatible = "ti,am335x-usb-ctrl-module";
 				reg = <0x44e10620 0x10
 					0x44e10648 0x4>;
@@ -551,7 +551,7 @@
 					"tx14", "tx15";
 			};
 
-			cppi41dma: dma-controller@07402000 {
+			cppi41dma: dma-controller@47402000 {
 				compatible = "ti,am3359-cppi41";
 				reg =  <0x47400000 0x1000
 					0x47402000 0x1000

arch/arm/boot/dts/am4372.dtsi

@@ -161,9 +161,6 @@
 			ti,hwmods = "mailbox";
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <8>;
-			ti,mbox-names = "wkup_m3";
-			ti,mbox-data = <0 0 0 0>;
-			status = "disabled";
 		};
 
 		timer1: timer@44e31000 {

arch/arm/boot/dts/armada-370-netgear-rn102.dts

@@ -144,6 +144,10 @@
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
 
+				/* Use Hardware BCH ECC */
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
 				partition@0 {
 					label = "u-boot";
 					reg = <0x0000000 0x180000>;  /* 1.5MB */

arch/arm/boot/dts/armada-370-netgear-rn104.dts

@@ -146,6 +146,10 @@
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
 
+				/* Use Hardware BCH ECC */
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
 				partition@0 {
 					label = "u-boot";
 					reg = <0x0000000 0x180000>;  /* 1.5MB */

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -226,6 +226,7 @@
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
 				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
 			};
 
 			eth1: ethernet@74000 {

arch/arm/boot/dts/armada-370.dtsi

@@ -106,11 +106,6 @@
 				reg = <0x11100 0x20>;
 			};
 
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
 			pinctrl {
 				compatible = "marvell,mv88f6710-pinctrl";
 				reg = <0x18000 0x38>;
@@ -167,6 +162,11 @@
 				interrupts = <91>;
 			};
 
+			system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
 			gateclk: clock-gating-control@18220 {
 				compatible = "marvell,armada-370-gating-clock";
 				reg = <0x18220 0x4>;

arch/arm/boot/dts/armada-xp-db.dts

@@ -40,7 +40,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;

arch/arm/boot/dts/armada-xp-gp.dts

@@ -49,7 +49,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;

arch/arm/boot/dts/armada-xp-netgear-rn2120.dts

@@ -224,6 +224,10 @@
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
 
+				/* Use Hardware BCH ECC */
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
 				partition@0 {
 					label = "u-boot";
 					reg = <0x0000000 0x180000>;  /* 1.5MB */

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -23,7 +23,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
 	};
 
 	soc {
@@ -37,7 +37,7 @@
 			/* Device Bus parameters are required */
 
 			/* Read parameters */
-			devbus,bus-width    = <8>;
+			devbus,bus-width    = <16>;
 			devbus,turn-off-ps  = <60000>;
 			devbus,badr-skew-ps = <0>;
 			devbus,acc-first-ps = <124000>;

arch/arm/boot/dts/at91sam9263.dtsi

@@ -535,6 +535,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -544,6 +545,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff84000 0x600>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";

arch/arm/boot/dts/dra7-evm.dts

@@ -50,13 +50,13 @@
 
 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
-			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
+			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
-			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
+			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
-			0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
+			0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
-			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
-			0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
+			0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs1 */
-			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
+			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
-			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
+			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
 		>;
 	};
 
@@ -182,6 +182,7 @@
 					regulator-name = "ldo3";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
 					regulator-boot-on;
 				};
 

arch/arm/boot/dts/dra7.dtsi

@@ -178,7 +178,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio2: gpio@48055000 {
@@ -189,7 +189,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio3: gpio@48057000 {
@@ -200,7 +200,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio4: gpio@48059000 {
@@ -211,7 +211,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio5: gpio@4805b000 {
@@ -222,7 +222,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio6: gpio@4805d000 {
@@ -233,7 +233,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio7: gpio@48051000 {
@@ -244,7 +244,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		gpio8: gpio@48053000 {
@@ -255,7 +255,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <1>;
+			#interrupt-cells = <2>;
 		};
 
 		uart1: serial@4806a000 {

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -287,6 +287,7 @@
 					regulator-name = "vdd_g3d";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
 					regulator-boot-on;
 					op_mode = <1>;
 				};

arch/arm/boot/dts/exynos5420.dtsi

@@ -323,6 +323,13 @@
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
+			/*
+			 * MDMA1 can support both secure and non-secure
+			 * AXI transactions. When this is enabled in the kernel
+			 * for boards that run in secure mode, we are getting
+			 * imprecise external aborts causing the kernel to oops.
+			 */
+			status = "disabled";
 		};
 	};
 

arch/arm/boot/dts/hi3620.dtsi

@@ -73,7 +73,7 @@
 
 		L2: l2-cache {
 			compatible = "arm,pl310-cache";
-			reg = <0xfc10000 0x100000>;
+			reg = <0x100000 0x100000>;
 			interrupts = <0 15 4>;
 			cache-unified;
 			cache-level = <2>;

arch/arm/boot/dts/imx25.dtsi

@@ -30,6 +30,7 @@
 		spi2 = &spi3;
 		usb0 = &usbotg;
 		usb1 = &usbhost1;
+		ethernet0 = &fec;
 	};
 
 	cpus {

arch/arm/boot/dts/imx27.dtsi

@@ -30,6 +30,7 @@
 		spi0 = &cspi1;
 		spi1 = &cspi2;
 		spi2 = &cspi3;
+		ethernet0 = &fec;
 	};
 
 	aitc: aitc-interrupt-controller@e0000000 {

arch/arm/boot/dts/imx51.dtsi

@@ -27,6 +27,7 @@
 		spi0 = &ecspi1;
 		spi1 = &ecspi2;
 		spi2 = &cspi;
+		ethernet0 = &fec;
 	};
 
 	tzic: tz-interrupt-controller@e0000000 {

arch/arm/boot/dts/imx53.dtsi

@@ -33,6 +33,7 @@
 		spi0 = &ecspi1;
 		spi1 = &ecspi2;
 		spi2 = &cspi;
+		ethernet0 = &fec;
 	};
 
 	cpus {
@@ -87,7 +88,7 @@
 		ipu: ipu@18000000 {
 			#crtc-cells = <1>;
 			compatible = "fsl,imx53-ipu";
-			reg = <0x18000000 0x080000000>;
+			reg = <0x18000000 0x08000000>;
 			interrupts = <11 10>;
 			clocks = <&clks 59>, <&clks 110>, <&clks 61>;
 			clock-names = "bus", "di0", "di1";

arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts

@@ -30,6 +30,16 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+        };
+
 	ocp@f1000000 {
 		pinctrl@10000 {
 			pmx_usb_led: pmx-usb-led {
@@ -73,14 +83,6 @@
 		ehci@50000 {
 			status = "okay";
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {

arch/arm/boot/dts/kirkwood-nsa310-common.dtsi

@@ -4,6 +4,16 @@
 / {
 	model = "ZyXEL NSA310";
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 
@@ -26,14 +36,6 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio_poweroff {

arch/arm/boot/dts/omap4.dtsi

@@ -275,6 +275,8 @@
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
 			ti,no-idle-on-init;
+			clocks = <&l3_div_ck>;
+			clock-names = "fck";
 		};
 
 		uart1: serial@4806a000 {

arch/arm/boot/dts/omap5.dtsi

@@ -302,6 +302,8 @@
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
 		};
 
 		i2c1: i2c@48070000 {

arch/arm/boot/dts/sama5d3_can.dtsi

@@ -40,7 +40,7 @@
 						atmel,clk-output-range = <0 66000000>;
 					};
 
-					can1_clk: can0_clk {
+					can1_clk: can1_clk {
 						#clock-cells = <0>;
 						reg = <41>;
 						atmel,clk-output-range = <0 66000000>;

arch/arm/boot/dts/ste-ccu8540.dts

@@ -18,6 +18,7 @@
 	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
 	};
 

arch/arm/boot/dts/tegra124.dtsi

@@ -164,19 +164,6 @@
 		status = "disabled";
 	};
 
-	serial@70006400 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x70006400 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTE>;
-		resets = <&tegra_car 66>;
-		reset-names = "serial";
-		dmas = <&apbdma 20>, <&apbdma 20>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
 	pwm@7000a000 {
 		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;

arch/arm/common/edma.c

@@ -1423,55 +1423,38 @@ EXPORT_SYMBOL(edma_clear_event);
 
 #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
 
-static int edma_of_read_u32_to_s16_array(const struct device_node *np,
+static int edma_xbar_event_map(struct device *dev, struct device_node *node,
-					 const char *propname, s16 *out_values,
+			       struct edma_soc_info *pdata, size_t sz)
-					 size_t sz)
 {
-	int ret;
+	const char pname[] = "ti,edma-xbar-event-map";
-
-	ret = of_property_read_u16_array(np, propname, out_values, sz);
-	if (ret)
-		return ret;
-
-	/* Terminate it */
-	*out_values++ = -1;
-	*out_values++ = -1;
-
-	return 0;
-}
-
-static int edma_xbar_event_map(struct device *dev,
-			       struct device_node *node,
-			       struct edma_soc_info *pdata, int len)
-{
-	int ret, i;
 	struct resource res;
 	void __iomem *xbar;
-	const s16 (*xbar_chans)[2];
+	s16 (*xbar_chans)[2];
+	size_t nelm = sz / sizeof(s16);
 	u32 shift, offset, mux;
+	int ret, i;
 
-	xbar_chans = devm_kzalloc(dev,
+	xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
-				  len/sizeof(s16) + 2*sizeof(s16),
-				  GFP_KERNEL);
 	if (!xbar_chans)
 		return -ENOMEM;
 
 	ret = of_address_to_resource(node, 1, &res);
 	if (ret)
-		return -EIO;
+		return -ENOMEM;
 
 	xbar = devm_ioremap(dev, res.start, resource_size(&res));
 	if (!xbar)
 		return -ENOMEM;
 
-	ret = edma_of_read_u32_to_s16_array(node,
+	ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
-					    "ti,edma-xbar-event-map",
-					    (s16 *)xbar_chans,
-					    len/sizeof(u32));
 	if (ret)
 		return -EIO;
 
-	for (i = 0; xbar_chans[i][0] != -1; i++) {
+	/* Invalidate last entry for the other user of this mess */
+	nelm >>= 1;
+	xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
+
+	for (i = 0; i < nelm; i++) {
 		shift = (xbar_chans[i][1] & 0x03) << 3;
 		offset = xbar_chans[i][1] & 0xfffffffc;
 		mux = readl(xbar + offset);
@@ -1480,8 +1463,7 @@ static int edma_xbar_event_map(struct device *dev,
 		writel(mux, (xbar + offset));
 	}
 
-	pdata->xbar_chans = xbar_chans;
+	pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
-
 	return 0;
 }
 

arch/arm/configs/bcmrpi_cutdown_defconfig

@@ -0,0 +1,503 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_UID16 is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_BCM2708=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NET_PKTGEN=m
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRTTY_SIR=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_MESH=y
+CONFIG_WIMAX=m
+CONFIG_NET_9P=m
+CONFIG_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_DEVTMPFS=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_MISC_DEVICES=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_MAC80211_HWSIM=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_B43=m
+CONFIG_B43LEGACY=m
+CONFIG_HOSTAP=m
+CONFIG_IWM=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RTL8192CU=m
+CONFIG_WL1251=m
+CONFIG_WL12XX_MENU=m
+CONFIG_ZD1211RW=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_PPP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_NETCONSOLE=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_SERIO=m
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BCM2708_WDT=m
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_BCM2835=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=m
+CONFIG_USB_DWCOTG=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=m
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_BCM2708=y
+CONFIG_MMC_SDHCI_BCM2708_DMA=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_9P_FS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_BCM2708=m
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_BCM2708=m

arch/arm/configs/bcmrpi_emergency_defconfig

@@ -0,0 +1,532 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../target_fs"
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_BCM2708=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_AEABI=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
+CONFIG_KEXEC=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NET_PKTGEN=m
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRTTY_SIR=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_MESH=y
+CONFIG_WIMAX=m
+CONFIG_NET_9P=m
+CONFIG_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_MISC_DEVICES=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_MD=y
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_MAC80211_HWSIM=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_B43=m
+CONFIG_B43LEGACY=m
+CONFIG_HOSTAP=m
+CONFIG_IWM=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RTL8192CU=m
+CONFIG_WL1251=m
+CONFIG_WL12XX_MENU=m
+CONFIG_ZD1211RW=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_PPP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_NETCONSOLE=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_SERIO=m
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BCM2708_WDT=m
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_BCM2835=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=m
+CONFIG_USB_DWCOTG=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_BCM2708=y
+CONFIG_MMC_SDHCI_BCM2708_DMA=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FANOTIFY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_FSCACHE_HISTOGRAM=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_9P_FS=m
+CONFIG_9P_FS_POSIX_ACL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_STACK_TRACER=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_KGDB=y
+CONFIG_KGDB_KDB=y
+CONFIG_KDB_KEYBOARD=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y

arch/arm/configs/bcmrpi_quick_defconfig

@@ -0,0 +1,197 @@
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_LOCALVERSION="-quick"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_BCM2708=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_NCM is not set
+CONFIG_USB_NET_SMSC95XX=y
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_TTY_PRINTK=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_BCM2708=y
+CONFIG_RAW_DRIVER=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_BCM2835=y
+CONFIG_WATCHDOG=y
+CONFIG_BCM2708_WDT=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_BCM2835=y
+# CONFIG_SND_USB is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DWCOTG=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_BCM2708=y
+CONFIG_MMC_SDHCI_BCM2708_DMA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FSCACHE=y
+CONFIG_CACHEFILES=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_KDB=y
+# CONFIG_ARM_UNWIND is not set
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y

arch/arm/crypto/aesbs-glue.c

@@ -137,7 +137,7 @@ static int aesbs_cbc_encrypt(struct blkcipher_desc *desc,
 				dst += AES_BLOCK_SIZE;
 			} while (--blocks);
 		}
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }
@@ -158,7 +158,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
 		bsaes_cbc_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
 				  walk.nbytes, &ctx->dec, walk.iv);
 		kernel_neon_end();
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	while (walk.nbytes) {
 		u32 blocks = walk.nbytes / AES_BLOCK_SIZE;
@@ -182,7 +182,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
 			dst += AES_BLOCK_SIZE;
 			src += AES_BLOCK_SIZE;
 		} while (--blocks);
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }
@@ -268,7 +268,7 @@ static int aesbs_xts_encrypt(struct blkcipher_desc *desc,
 		bsaes_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
 				  walk.nbytes, &ctx->enc, walk.iv);
 		kernel_neon_end();
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }
@@ -292,7 +292,7 @@ static int aesbs_xts_decrypt(struct blkcipher_desc *desc,
 		bsaes_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
 				  walk.nbytes, &ctx->dec, walk.iv);
 		kernel_neon_end();
-		err = blkcipher_walk_done(desc, &walk, 0);
+		err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
 	}
 	return err;
 }

arch/arm/include/asm/div64.h

@@ -156,7 +156,7 @@
 		/* Select the best insn combination to perform the   */	\
 		/* actual __m * __n / (__p << 64) operation.         */	\
 		if (!__c) {						\
-			asm (	"umull	%Q0, %R0, %1, %Q2\n\t"		\
+			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
 				"mov	%Q0, #0"			\
 				: "=&r" (__res)				\
 				: "r" (__m), "r" (__n)			\

arch/arm/include/asm/futex.h

@@ -3,11 +3,6 @@
 
 #ifdef __KERNEL__
 
-#if defined(CONFIG_CPU_USE_DOMAINS) && defined(CONFIG_SMP)
-/* ARM doesn't provide unprivileged exclusive memory accessors */
-#include <asm-generic/futex.h>
-#else
-
 #include <linux/futex.h>
 #include <linux/uaccess.h>
 #include <asm/errno.h>
@@ -164,6 +159,5 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 	return ret;
 }
 
-#endif /* !(CPU_USE_DOMAINS && SMP) */
 #endif /* __KERNEL__ */
 #endif /* _ASM_ARM_FUTEX_H */

arch/arm/include/asm/irqflags.h

@@ -145,12 +145,22 @@ static inline unsigned long arch_local_save_flags(void)
 }
 
 /*
- * restore saved IRQ & FIQ state
+ * restore saved IRQ state
  */
 static inline void arch_local_irq_restore(unsigned long flags)
 {
+	unsigned long temp = 0;
+	flags &= ~(1 << 6);
 	asm volatile (
-		"	msr	" IRQMASK_REG_NAME_W ", %0	@ local_irq_restore"
+		" mrs %0, cpsr"
+		: "=r" (temp)
+		:
+		: "memory", "cc");
+		/* Preserve FIQ bit */
+		temp &= (1 << 6);
+		flags = flags | temp;
+	asm volatile (
+		"    msr    cpsr_c, %0    @ local_irq_restore"
 		:
 		: "r" (flags)
 		: "memory", "cc");

arch/arm/include/asm/pgtable-2level.h

@@ -140,6 +140,7 @@
 #define L_PTE_MT_DEV_NONSHARED	(_AT(pteval_t, 0x0c) << 2)	/* 1100 */
 #define L_PTE_MT_DEV_WC		(_AT(pteval_t, 0x09) << 2)	/* 1001 */
 #define L_PTE_MT_DEV_CACHED	(_AT(pteval_t, 0x0b) << 2)	/* 1011 */
+#define L_PTE_MT_VECTORS	(_AT(pteval_t, 0x0f) << 2)	/* 1111 */
 #define L_PTE_MT_MASK		(_AT(pteval_t, 0x0f) << 2)
 
 #ifndef __ASSEMBLY__

arch/arm/include/asm/thread_info.h

@@ -43,16 +43,6 @@ struct cpu_context_save {
 	__u32	extra[2];		/* Xscale 'acc' register, etc */
 };
 
-struct arm_restart_block {
-	union {
-		/* For user cache flushing */
-		struct {
-			unsigned long start;
-			unsigned long end;
-		} cache;
-	};
-};
-
 /*
  * low level task data that entry.S needs immediate access to.
  * __switch_to() assumes cpu_context follows immediately after cpu_domain.
@@ -78,7 +68,6 @@ struct thread_info {
 	unsigned long		thumbee_state;	/* ThumbEE Handler Base register */
 #endif
 	struct restart_block	restart_block;
-	struct arm_restart_block	arm_restart_block;
 };
 
 #define INIT_THREAD_INFO(tsk)						\

arch/arm/include/asm/tls.h

@@ -1,6 +1,9 @@
 #ifndef __ASMARM_TLS_H
 #define __ASMARM_TLS_H
 
+#include <linux/compiler.h>
+#include <asm/thread_info.h>
+
 #ifdef __ASSEMBLY__
 #include <asm/asm-offsets.h>
 	.macro switch_tls_none, base, tp, tpuser, tmp1, tmp2
@@ -50,6 +53,49 @@
 #endif
 
 #ifndef __ASSEMBLY__
+
+static inline void set_tls(unsigned long val)
+{
+	struct thread_info *thread;
+
+	thread = current_thread_info();
+
+	thread->tp_value[0] = val;
+
+	/*
+	 * This code runs with preemption enabled and therefore must
+	 * be reentrant with respect to switch_tls.
+	 *
+	 * We need to ensure ordering between the shadow state and the
+	 * hardware state, so that we don't corrupt the hardware state
+	 * with a stale shadow state during context switch.
+	 *
+	 * If we're preempted here, switch_tls will load TPIDRURO from
+	 * thread_info upon resuming execution and the following mcr
+	 * is merely redundant.
+	 */
+	barrier();
+
+	if (!tls_emu) {
+		if (has_tls_reg) {
+			asm("mcr p15, 0, %0, c13, c0, 3"
+			    : : "r" (val));
+		} else {
+#ifdef CONFIG_KUSER_HELPERS
+			/*
+			 * User space must never try to access this
+			 * directly.  Expect your app to break
+			 * eventually if you do so.  The user helper
+			 * at 0xffff0fe0 must be used instead.  (see
+			 * entry-armv.S for details)
+			 */
+			*((unsigned int *)0xffff0ff0) = val;
+#endif
+		}
+
+	}
+}
+
 static inline unsigned long get_tpuser(void)
 {
 	unsigned long reg = 0;
@@ -59,5 +105,23 @@ static inline unsigned long get_tpuser(void)
 
 	return reg;
 }
+
+static inline void set_tpuser(unsigned long val)
+{
+	/* Since TPIDRURW is fully context-switched (unlike TPIDRURO),
+	 * we need not update thread_info.
+	 */
+	if (has_tls_reg && !tls_emu) {
+		asm("mcr p15, 0, %0, c13, c0, 2"
+		    : : "r" (val));
+	}
+}
+
+static inline void flush_tls(void)
+{
+	set_tls(0);
+	set_tpuser(0);
+}
+
 #endif
 #endif	/* __ASMARM_TLS_H */

arch/arm/include/asm/uaccess.h

@@ -171,8 +171,9 @@ extern int __put_user_8(void *, unsigned long long);
 #define __put_user_check(x,p)							\
 	({								\
 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
+		const typeof(*(p)) __user *__tmp_p = (p);		\
 		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\

arch/arm/include/asm/unistd.h

@@ -15,7 +15,17 @@
 
 #include <uapi/asm/unistd.h>
 
+/*
+ * This may need to be greater than __NR_last_syscall+1 in order to
+ * account for the padding in the syscall table
+ */
 #define __NR_syscalls  (384)
+
+/*
+ * *NOTE*: This is a ghost syscall private to the kernel.  Only the
+ * __kuser_cmpxchg code in entry-armv.S should be aware of its
+ * existence.  Don't ever use this from user code.
+ */
 #define __ARM_NR_cmpxchg		(__ARM_NR_BASE+0x00fff0)
 
 #define __ARCH_WANT_STAT64
@@ -48,6 +58,5 @@
  */
 #define __IGNORE_fadvise64_64
 #define __IGNORE_migrate_pages
-#define __IGNORE_kcmp
 
 #endif /* __ASM_ARM_UNISTD_H */

arch/arm/include/uapi/asm/unistd.h

@@ -409,11 +409,6 @@
 #define __NR_sched_setattr		(__NR_SYSCALL_BASE+380)
 #define __NR_sched_getattr		(__NR_SYSCALL_BASE+381)
 
-/*
- * This may need to be greater than __NR_last_syscall+1 in order to
- * account for the padding in the syscall table
- */
-
 /*
  * The following SWIs are ARM private.
  */
@@ -424,12 +419,6 @@
 #define __ARM_NR_usr32			(__ARM_NR_BASE+4)
 #define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
 
-/*
- * *NOTE*: This is a ghost syscall private to the kernel.  Only the
- * __kuser_cmpxchg code in entry-armv.S should be aware of its
- * existence.  Don't ever use this from user code.
- */
-
 /*
  * The following syscalls are obsolete and no longer available for EABI.
  */

arch/arm/kernel/crash_dump.c

@@ -39,7 +39,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 	if (!csize)
 		return 0;
 
-	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+	vaddr = ioremap(__pfn_to_phys(pfn), PAGE_SIZE);
 	if (!vaddr)
 		return -ENOMEM;
 

arch/arm/kernel/entry-header.S

@@ -132,6 +132,10 @@
 	orrne	r5, V7M_xPSR_FRAMEPTRALIGN
 	biceq	r5, V7M_xPSR_FRAMEPTRALIGN
 
+	@ ensure bit 0 is cleared in the PC, otherwise behaviour is
+	@ unpredictable
+	bic	r4, #1
+
 	@ write basic exception frame
 	stmdb	r2!, {r1, r3-r5}
 	ldmia	sp, {r1, r3-r5}

arch/arm/kernel/fiqasm.S

@@ -47,3 +47,7 @@ ENTRY(__get_fiq_regs)
 	mov	r0, r0		@ avoid hazard prior to ARMv4
 	mov	pc, lr
 ENDPROC(__get_fiq_regs)
+
+ENTRY(__FIQ_Branch)
+	mov pc, r8
+ENDPROC(__FIQ_Branch)

arch/arm/kernel/irq.c

@@ -163,7 +163,7 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	c = irq_data_get_irq_chip(d);
 	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
-	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+	else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
 		cpumask_copy(d->affinity, affinity);
 
 	return ret;

arch/arm/kernel/kprobes-common.c

@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <asm/system_info.h>
+#include <asm/opcodes.h>
 
 #include "kprobes.h"
 
@@ -305,7 +306,8 @@ kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 
 	if (handler) {
 		/* We can emulate the instruction in (possibly) modified form */
-		asi->insn[0] = (insn & 0xfff00000) | (rn << 16) | reglist;
+		asi->insn[0] = __opcode_to_mem_arm((insn & 0xfff00000) |
+						   (rn << 16) | reglist);
 		asi->insn_handler = handler;
 		return INSN_GOOD;
 	}
@@ -334,13 +336,14 @@ prepare_emulated_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
 #ifdef CONFIG_THUMB2_KERNEL
 	if (thumb) {
 		u16 *thumb_insn = (u16 *)asi->insn;
-		thumb_insn[1] = 0x4770; /* Thumb bx lr */
+		/* Thumb bx lr */
-		thumb_insn[2] = 0x4770; /* Thumb bx lr */
+		thumb_insn[1] = __opcode_to_mem_thumb16(0x4770);
+		thumb_insn[2] = __opcode_to_mem_thumb16(0x4770);
 		return insn;
 	}
-	asi->insn[1] = 0xe12fff1e; /* ARM bx lr */
+	asi->insn[1] = __opcode_to_mem_arm(0xe12fff1e); /* ARM bx lr */
 #else
-	asi->insn[1] = 0xe1a0f00e; /* mov pc, lr */
+	asi->insn[1] = __opcode_to_mem_arm(0xe1a0f00e); /* mov pc, lr */
 #endif
 	/* Make an ARM instruction unconditional */
 	if (insn < 0xe0000000)
@@ -360,12 +363,12 @@ set_emulated_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
 	if (thumb) {
 		u16 *ip = (u16 *)asi->insn;
 		if (is_wide_instruction(insn))
-			*ip++ = insn >> 16;
+			*ip++ = __opcode_to_mem_thumb16(insn >> 16);
-		*ip++ = insn;
+		*ip++ = __opcode_to_mem_thumb16(insn);
 		return;
 	}
 #endif
-	asi->insn[0] = insn;
+	asi->insn[0] = __opcode_to_mem_arm(insn);
 }
 
 /*

arch/arm/kernel/kprobes-thumb.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
+#include <asm/opcodes.h>
 
 #include "kprobes.h"
 
@@ -163,9 +164,9 @@ t32_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	enum kprobe_insn ret = kprobe_decode_ldmstm(insn, asi);
 
 	/* Fixup modified instruction to have halfwords in correct order...*/
-	insn = asi->insn[0];
+	insn = __mem_to_opcode_arm(asi->insn[0]);
-	((u16 *)asi->insn)[0] = insn >> 16;
+	((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(insn >> 16);
-	((u16 *)asi->insn)[1] = insn & 0xffff;
+	((u16 *)asi->insn)[1] = __opcode_to_mem_thumb16(insn & 0xffff);
 
 	return ret;
 }
@@ -1153,7 +1154,7 @@ t16_decode_hiregs(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
 	insn &= ~0x00ff;
 	insn |= 0x001; /* Set Rdn = R1 and Rm = R0 */
-	((u16 *)asi->insn)[0] = insn;
+	((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(insn);
 	asi->insn_handler = t16_emulate_hiregs;
 	return INSN_GOOD;
 }
@@ -1182,8 +1183,10 @@ t16_decode_push(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	 * and call it with R9=SP and LR in the register list represented
 	 * by R8.
 	 */
-	((u16 *)asi->insn)[0] = 0xe929;		/* 1st half STMDB R9!,{} */
+	/* 1st half STMDB R9!,{} */
-	((u16 *)asi->insn)[1] = insn & 0x1ff;	/* 2nd half (register list) */
+	((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(0xe929);
+	/* 2nd half (register list) */
+	((u16 *)asi->insn)[1] = __opcode_to_mem_thumb16(insn & 0x1ff);
 	asi->insn_handler = t16_emulate_push;
 	return INSN_GOOD;
 }
@@ -1232,8 +1235,10 @@ t16_decode_pop(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	 * and call it with R9=SP and PC in the register list represented
 	 * by R8.
 	 */
-	((u16 *)asi->insn)[0] = 0xe8b9;		/* 1st half LDMIA R9!,{} */
+	/* 1st half LDMIA R9!,{} */
-	((u16 *)asi->insn)[1] = insn & 0x1ff;	/* 2nd half (register list) */
+	((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(0xe8b9);
+	/* 2nd half (register list) */
+	((u16 *)asi->insn)[1] = __opcode_to_mem_thumb16(insn & 0x1ff);
 	asi->insn_handler = insn & 0x100 ? t16_emulate_pop_pc
 					 : t16_emulate_pop_nopc;
 	return INSN_GOOD;

arch/arm/kernel/kprobes.c

@@ -26,6 +26,7 @@
 #include <linux/stop_machine.h>
 #include <linux/stringify.h>
 #include <asm/traps.h>
+#include <asm/opcodes.h>
 #include <asm/cacheflush.h>
 
 #include "kprobes.h"
@@ -62,10 +63,10 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 #ifdef CONFIG_THUMB2_KERNEL
 	thumb = true;
 	addr &= ~1; /* Bit 0 would normally be set to indicate Thumb code */
-	insn = ((u16 *)addr)[0];
+	insn = __mem_to_opcode_thumb16(((u16 *)addr)[0]);
 	if (is_wide_instruction(insn)) {
-		insn <<= 16;
+		u16 inst2 = __mem_to_opcode_thumb16(((u16 *)addr)[1]);
-		insn |= ((u16 *)addr)[1];
+		insn = __opcode_thumb32_compose(insn, inst2);
 		decode_insn = thumb32_kprobe_decode_insn;
 	} else
 		decode_insn = thumb16_kprobe_decode_insn;
@@ -73,7 +74,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	thumb = false;
 	if (addr & 0x3)
 		return -EINVAL;
-	insn = *p->addr;
+	insn = __mem_to_opcode_arm(*p->addr);
 	decode_insn = arm_kprobe_decode_insn;
 #endif
 

arch/arm/kernel/machine_kexec.c

@@ -184,3 +184,10 @@ void machine_kexec(struct kimage *image)
 
 	soft_restart(reboot_entry_phys);
 }
+
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_ARM_LPAE
+	VMCOREINFO_CONFIG(ARM_LPAE);
+#endif
+}

arch/arm/kernel/process.c

@@ -176,6 +176,16 @@ void arch_cpu_idle(void)
 		default_idle();
 }
 
+char bcm2708_reboot_mode = 'h';
+
+int __init reboot_setup(char *str)
+{
+	bcm2708_reboot_mode = str[0];
+	return 1;
+}
+
+__setup("reboot=", reboot_setup);
+
 /*
  * Called by kexec, immediately prior to machine_kexec().
  *
@@ -334,6 +344,8 @@ void flush_thread(void)
 	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
 	memset(&thread->fpstate, 0, sizeof(union fp_state));
 
+	flush_tls();
+
 	thread_notify(THREAD_NOTIFY_FLUSH, thread);
 }
 

arch/arm/kernel/stacktrace.c

@@ -83,13 +83,16 @@ static int save_trace(struct stackframe *frame, void *d)
 	return trace->nr_entries >= trace->max_entries;
 }
 
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+/* This must be noinline to so that our skip calculation works correctly */
+static noinline void __save_stack_trace(struct task_struct *tsk,
+	struct stack_trace *trace, unsigned int nosched)
 {
 	struct stack_trace_data data;
 	struct stackframe frame;
 
 	data.trace = trace;
 	data.skip = trace->skip;
+	data.no_sched_functions = nosched;
 
 	if (tsk != current) {
 #ifdef CONFIG_SMP
@@ -102,7 +105,6 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 			trace->entries[trace->nr_entries++] = ULONG_MAX;
 		return;
 #else
-		data.no_sched_functions = 1;
 		frame.fp = thread_saved_fp(tsk);
 		frame.sp = thread_saved_sp(tsk);
 		frame.lr = 0;		/* recovered from the stack */
@@ -111,11 +113,12 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 	} else {
 		register unsigned long current_sp asm ("sp");
 
-		data.no_sched_functions = 0;
+		/* We don't want this function nor the caller */
+		data.skip += 2;
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_sp;
 		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)save_stack_trace_tsk;
+		frame.pc = (unsigned long)__save_stack_trace;
 	}
 
 	walk_stackframe(&frame, save_trace, &data);
@@ -123,9 +126,14 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	__save_stack_trace(tsk, trace, 1);
+}
+
 void save_stack_trace(struct stack_trace *trace)
 {
-	save_stack_trace_tsk(current, trace);
+	__save_stack_trace(current, trace, 0);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 #endif

arch/arm/kernel/thumbee.c

@@ -45,7 +45,7 @@ static int thumbee_notifier(struct notifier_block *self, unsigned long cmd, void
 
 	switch (cmd) {
 	case THREAD_NOTIFY_FLUSH:
-		thread->thumbee_state = 0;
+		teehbr_write(0);
 		break;
 	case THREAD_NOTIFY_SWITCH:
 		current_thread_info()->thumbee_state = teehbr_read();

arch/arm/kernel/traps.c

@@ -510,8 +510,6 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	return regs->ARM_r0;
 }
 
-static long do_cache_op_restart(struct restart_block *);
-
 static inline int
 __do_cache_op(unsigned long start, unsigned long end)
 {
@@ -520,24 +518,8 @@ __do_cache_op(unsigned long start, unsigned long end)
 	do {
 		unsigned long chunk = min(PAGE_SIZE, end - start);
 
-		if (signal_pending(current)) {
+		if (fatal_signal_pending(current))
-			struct thread_info *ti = current_thread_info();
+			return 0;
-
-			ti->restart_block = (struct restart_block) {
-				.fn	= do_cache_op_restart,
-			};
-
-			ti->arm_restart_block = (struct arm_restart_block) {
-				{
-					.cache = {
-						.start	= start,
-						.end	= end,
-					},
-				},
-			};
-
-			return -ERESTART_RESTARTBLOCK;
-		}
 
 		ret = flush_cache_user_range(start, start + chunk);
 		if (ret)
@@ -550,15 +532,6 @@ __do_cache_op(unsigned long start, unsigned long end)
 	return 0;
 }
 
-static long do_cache_op_restart(struct restart_block *unused)
-{
-	struct arm_restart_block *restart_block;
-
-	restart_block = &current_thread_info()->arm_restart_block;
-	return __do_cache_op(restart_block->cache.start,
-			     restart_block->cache.end);
-}
-
 static inline int
 do_cache_op(unsigned long start, unsigned long end, int flags)
 {
@@ -578,7 +551,6 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 #define NR(x) ((__ARM_NR_##x) - __ARM_NR_BASE)
 asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 {
-	struct thread_info *thread = current_thread_info();
 	siginfo_t info;
 
 	if ((no >> 16) != (__ARM_NR_BASE>> 16))
@@ -629,21 +601,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 		return regs->ARM_r0;
 
 	case NR(set_tls):
-		thread->tp_value[0] = regs->ARM_r0;
+		set_tls(regs->ARM_r0);
-		if (tls_emu)
-			return 0;
-		if (has_tls_reg) {
-			asm ("mcr p15, 0, %0, c13, c0, 3"
-				: : "r" (regs->ARM_r0));
-		} else {
-			/*
-			 * User space must never try to access this directly.
-			 * Expect your app to break eventually if you do so.
-			 * The user helper at 0xffff0fe0 must be used instead.
-			 * (see entry-armv.S for details)
-			 */
-			*((unsigned int *)0xffff0ff0) = regs->ARM_r0;
-		}
 		return 0;
 
 #ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG