raspi/linux
1
0
Fork 1
mirror of https://github.com/raspberrypi/linux.git synced 2025-12-12 12:59:51 +00:00
Code Issues Projects Releases Wiki Activity
Files
0d60fd50328a96a901b09ed653704ce7f41d15ce
linux/drivers/net/wireless/intel/iwlwifi/dvm/eeprom.c
Johannes Berg ee3f2566c8 wifi: iwlwifi: rename bits in config/boot control register 
The register 0x000 is now really boot control, and some
of the old bit names were (even for old hardware) not
reflecting the names on the hardware side; rename them
in the driver to align the naming.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241228223206.6f25be160619.I3ffc9601e99dc414a9ae54a0d90c9d20c0253da5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-01-13 15:26:39 +01:00

1151 lines
34 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
/*
* Copyright (C) 2005-2014, 2018-2019, 2021, 2024 Intel Corporation
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/export.h>
#include "iwl-drv.h"
#include "iwl-debug.h"
#include "iwl-io.h"
#include "iwl-prph.h"
#include "iwl-csr.h"
#include "agn.h"
/* EEPROM offset definitions */
/* indirect access definitions */
#define ADDRESS_MSK 0x0000FFFF
#define INDIRECT_TYPE_MSK 0x000F0000
#define INDIRECT_HOST 0x00010000
#define INDIRECT_GENERAL 0x00020000
#define INDIRECT_REGULATORY 0x00030000
#define INDIRECT_CALIBRATION 0x00040000
#define INDIRECT_PROCESS_ADJST 0x00050000
#define INDIRECT_OTHERS 0x00060000
#define INDIRECT_TXP_LIMIT 0x00070000
#define INDIRECT_TXP_LIMIT_SIZE 0x00080000
#define INDIRECT_ADDRESS 0x00100000
/* corresponding link offsets in EEPROM */
#define EEPROM_LINK_HOST (2*0x64)
#define EEPROM_LINK_GENERAL (2*0x65)
#define EEPROM_LINK_REGULATORY (2*0x66)
#define EEPROM_LINK_CALIBRATION (2*0x67)
#define EEPROM_LINK_PROCESS_ADJST (2*0x68)
#define EEPROM_LINK_OTHERS (2*0x69)
#define EEPROM_LINK_TXP_LIMIT (2*0x6a)
#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b)
/* General */
#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */
#define EEPROM_SUBSYSTEM_ID (2*0x0A) /* 2 bytes */
#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */
#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */
#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */
#define EEPROM_VERSION (2*0x44) /* 2 bytes */
#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */
#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */
#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */
#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */
/* calibration */
struct iwl_eeprom_calib_hdr {
u8 version;
u8 pa_type;
__le16 voltage;
} __packed;
#define EEPROM_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION)
#define EEPROM_XTAL ((2*0x128) | EEPROM_CALIB_ALL)
/* temperature */
#define EEPROM_KELVIN_TEMPERATURE ((2*0x12A) | EEPROM_CALIB_ALL)
#define EEPROM_RAW_TEMPERATURE ((2*0x12B) | EEPROM_CALIB_ALL)
/* SKU Capabilities (actual values from EEPROM definition) */
enum eeprom_sku_bits {
EEPROM_SKU_CAP_BAND_24GHZ = BIT(4),
EEPROM_SKU_CAP_BAND_52GHZ = BIT(5),
EEPROM_SKU_CAP_11N_ENABLE = BIT(6),
EEPROM_SKU_CAP_AMT_ENABLE = BIT(7),
EEPROM_SKU_CAP_IPAN_ENABLE = BIT(8)
};
/* radio config bits (actual values from EEPROM definition) */
#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */
#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */
#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */
#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */
#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */
#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
/*
* EEPROM bands
* These are the channel numbers from each band in the order
* that they are stored in the EEPROM band information. Note
* that EEPROM bands aren't the same as mac80211 bands, and
* there are even special "ht40 bands" in the EEPROM.
*/
static const u8 iwl_eeprom_band_1[14] = { /* 2.4 GHz */
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
};
static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */
183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
};
static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */
34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
};
static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */
100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
};
static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */
145, 149, 153, 157, 161, 165
};
static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */
1, 2, 3, 4, 5, 6, 7
};
static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */
36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
};
#define IWL_NUM_CHANNELS (ARRAY_SIZE(iwl_eeprom_band_1) + \
ARRAY_SIZE(iwl_eeprom_band_2) + \
ARRAY_SIZE(iwl_eeprom_band_3) + \
ARRAY_SIZE(iwl_eeprom_band_4) + \
ARRAY_SIZE(iwl_eeprom_band_5))
/* rate data (static) */
static struct ieee80211_rate iwl_cfg80211_rates[] = {
{ .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, },
{ .bitrate = 2 * 10, .hw_value = 1, .hw_value_short = 1,
.flags = IEEE80211_RATE_SHORT_PREAMBLE, },
{ .bitrate = 5.5 * 10, .hw_value = 2, .hw_value_short = 2,
.flags = IEEE80211_RATE_SHORT_PREAMBLE, },
{ .bitrate = 11 * 10, .hw_value = 3, .hw_value_short = 3,
.flags = IEEE80211_RATE_SHORT_PREAMBLE, },
{ .bitrate = 6 * 10, .hw_value = 4, .hw_value_short = 4, },
{ .bitrate = 9 * 10, .hw_value = 5, .hw_value_short = 5, },
{ .bitrate = 12 * 10, .hw_value = 6, .hw_value_short = 6, },
{ .bitrate = 18 * 10, .hw_value = 7, .hw_value_short = 7, },
{ .bitrate = 24 * 10, .hw_value = 8, .hw_value_short = 8, },
{ .bitrate = 36 * 10, .hw_value = 9, .hw_value_short = 9, },
{ .bitrate = 48 * 10, .hw_value = 10, .hw_value_short = 10, },
{ .bitrate = 54 * 10, .hw_value = 11, .hw_value_short = 11, },
};
#define RATES_24_OFFS 0
#define N_RATES_24 ARRAY_SIZE(iwl_cfg80211_rates)
#define RATES_52_OFFS 4
#define N_RATES_52 (N_RATES_24 - RATES_52_OFFS)
/* EEPROM reading functions */
static u16 iwl_eeprom_query16(const u8 *eeprom, size_t eeprom_size, int offset)
{
if (WARN_ON(offset + sizeof(u16) > eeprom_size))
return 0;
return le16_to_cpup((__le16 *)(eeprom + offset));
}
static u32 eeprom_indirect_address(const u8 *eeprom, size_t eeprom_size,
u32 address)
{
u16 offset = 0;
if ((address & INDIRECT_ADDRESS) == 0)
return address;
switch (address & INDIRECT_TYPE_MSK) {
case INDIRECT_HOST:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_HOST);
break;
case INDIRECT_GENERAL:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_GENERAL);
break;
case INDIRECT_REGULATORY:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_REGULATORY);
break;
case INDIRECT_TXP_LIMIT:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_TXP_LIMIT);
break;
case INDIRECT_TXP_LIMIT_SIZE:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_TXP_LIMIT_SIZE);
break;
case INDIRECT_CALIBRATION:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_CALIBRATION);
break;
case INDIRECT_PROCESS_ADJST:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_PROCESS_ADJST);
break;
case INDIRECT_OTHERS:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_OTHERS);
break;
default:
WARN_ON(1);
break;
}
/* translate the offset from words to byte */
return (address & ADDRESS_MSK) + (offset << 1);
}
static const u8 *iwl_eeprom_query_addr(const u8 *eeprom, size_t eeprom_size,
u32 offset)
{
u32 address = eeprom_indirect_address(eeprom, eeprom_size, offset);
if (WARN_ON(address >= eeprom_size))
return NULL;
return &eeprom[address];
}
static int iwl_eeprom_read_calib(const u8 *eeprom, size_t eeprom_size,
struct iwl_nvm_data *data)
{
struct iwl_eeprom_calib_hdr *hdr;
hdr = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size,
EEPROM_CALIB_ALL);
if (!hdr)
return -ENODATA;
data->calib_version = hdr->version;
data->calib_voltage = hdr->voltage;
return 0;
}
/**
* enum iwl_eeprom_channel_flags - channel flags in EEPROM
* @EEPROM_CHANNEL_VALID: channel is usable for this SKU/geo
* @EEPROM_CHANNEL_IBSS: usable as an IBSS channel
* @EEPROM_CHANNEL_ACTIVE: active scanning allowed
* @EEPROM_CHANNEL_RADAR: radar detection required
* @EEPROM_CHANNEL_WIDE: 20 MHz channel okay (?)
* @EEPROM_CHANNEL_DFS: dynamic freq selection candidate
*/
enum iwl_eeprom_channel_flags {
EEPROM_CHANNEL_VALID = BIT(0),
EEPROM_CHANNEL_IBSS = BIT(1),
EEPROM_CHANNEL_ACTIVE = BIT(3),
EEPROM_CHANNEL_RADAR = BIT(4),
EEPROM_CHANNEL_WIDE = BIT(5),
EEPROM_CHANNEL_DFS = BIT(7),
};
/**
* struct iwl_eeprom_channel - EEPROM channel data
* @flags: %EEPROM_CHANNEL_* flags
* @max_power_avg: max power (in dBm) on this channel, at most 31 dBm
*/
struct iwl_eeprom_channel {
u8 flags;
s8 max_power_avg;
} __packed;
enum iwl_eeprom_enhanced_txpwr_flags {
IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0),
IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1),
IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2),
IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3),
IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4),
IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5),
IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6),
IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7),
};
/**
* struct iwl_eeprom_enhanced_txpwr - enhanced regulatory TX power limits
* @flags: entry flags
* @channel: channel number
* @chain_a_max: chain a max power in 1/2 dBm
* @chain_b_max: chain b max power in 1/2 dBm
* @chain_c_max: chain c max power in 1/2 dBm
* @delta_20_in_40: 20-in-40 deltas (hi/lo)
* @mimo2_max: mimo2 max power in 1/2 dBm
* @mimo3_max: mimo3 max power in 1/2 dBm
*
* This structure presents the enhanced regulatory tx power limit layout
* in an EEPROM image.
*/
struct iwl_eeprom_enhanced_txpwr {
u8 flags;
u8 channel;
s8 chain_a_max;
s8 chain_b_max;
s8 chain_c_max;
u8 delta_20_in_40;
s8 mimo2_max;
s8 mimo3_max;
} __packed;
static s8 iwl_get_max_txpwr_half_dbm(const struct iwl_nvm_data *data,
struct iwl_eeprom_enhanced_txpwr *txp)
{
s8 result = 0; /* (.5 dBm) */
/* Take the highest tx power from any valid chains */
if (data->valid_tx_ant & ANT_A && txp->chain_a_max > result)
result = txp->chain_a_max;
if (data->valid_tx_ant & ANT_B && txp->chain_b_max > result)
result = txp->chain_b_max;
if (data->valid_tx_ant & ANT_C && txp->chain_c_max > result)
result = txp->chain_c_max;
if ((data->valid_tx_ant == ANT_AB ||
data->valid_tx_ant == ANT_BC ||
data->valid_tx_ant == ANT_AC) && txp->mimo2_max > result)
result = txp->mimo2_max;
if (data->valid_tx_ant == ANT_ABC && txp->mimo3_max > result)
result = txp->mimo3_max;
return result;
}
#define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT)
#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
#define TXP_CHECK_AND_PRINT(x) \
((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) ? # x " " : "")
static void
iwl_eeprom_enh_txp_read_element(struct iwl_nvm_data *data,
struct iwl_eeprom_enhanced_txpwr *txp,
int n_channels, s8 max_txpower_avg)
{
int ch_idx;
enum nl80211_band band;
band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ?
NL80211_BAND_5GHZ : NL80211_BAND_2GHZ;
for (ch_idx = 0; ch_idx < n_channels; ch_idx++) {
struct ieee80211_channel *chan = &data->channels[ch_idx];
/* update matching channel or from common data only */
if (txp->channel != 0 && chan->hw_value != txp->channel)
continue;
/* update matching band only */
if (band != chan->band)
continue;
if (chan->max_power < max_txpower_avg &&
!(txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ))
chan->max_power = max_txpower_avg;
}
}
static void iwl_eeprom_enhanced_txpower(struct device *dev,
struct iwl_nvm_data *data,
const u8 *eeprom, size_t eeprom_size,
int n_channels)
{
struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
int idx, entries;
__le16 *txp_len;
s8 max_txp_avg_halfdbm;
BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8);
/* the length is in 16-bit words, but we want entries */
txp_len = (__le16 *)iwl_eeprom_query_addr(eeprom, eeprom_size,
EEPROM_TXP_SZ_OFFS);
entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;
txp_array = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size,
EEPROM_TXP_OFFS);
for (idx = 0; idx < entries; idx++) {
txp = &txp_array[idx];
/* skip invalid entries */
if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
continue;
IWL_DEBUG_EEPROM(dev, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n",
(txp->channel && (txp->flags &
IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ?
"Common " : (txp->channel) ?
"Channel" : "Common",
(txp->channel),
TXP_CHECK_AND_PRINT(VALID),
TXP_CHECK_AND_PRINT(BAND_52G),
TXP_CHECK_AND_PRINT(OFDM),
TXP_CHECK_AND_PRINT(40MHZ),
TXP_CHECK_AND_PRINT(HT_AP),
TXP_CHECK_AND_PRINT(RES1),
TXP_CHECK_AND_PRINT(RES2),
TXP_CHECK_AND_PRINT(COMMON_TYPE),
txp->flags);
IWL_DEBUG_EEPROM(dev,
"\t\t chain_A: %d chain_B: %d chain_C: %d\n",
txp->chain_a_max, txp->chain_b_max,
txp->chain_c_max);
IWL_DEBUG_EEPROM(dev,
"\t\t MIMO2: %d MIMO3: %d High 20_on_40: 0x%02x Low 20_on_40: 0x%02x\n",
txp->mimo2_max, txp->mimo3_max,
((txp->delta_20_in_40 & 0xf0) >> 4),
(txp->delta_20_in_40 & 0x0f));
max_txp_avg_halfdbm = iwl_get_max_txpwr_half_dbm(data, txp);
iwl_eeprom_enh_txp_read_element(data, txp, n_channels,
DIV_ROUND_UP(max_txp_avg_halfdbm, 2));
if (max_txp_avg_halfdbm > data->max_tx_pwr_half_dbm)
data->max_tx_pwr_half_dbm = max_txp_avg_halfdbm;
}
}
static void iwl_init_band_reference(const struct iwl_cfg *cfg,
const u8 *eeprom, size_t eeprom_size,
int eeprom_band, int *eeprom_ch_count,
const struct iwl_eeprom_channel **ch_info,
const u8 **eeprom_ch_array)
{
u32 offset = cfg->eeprom_params->regulatory_bands[eeprom_band - 1];
offset |= INDIRECT_ADDRESS | INDIRECT_REGULATORY;
*ch_info = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size, offset);
switch (eeprom_band) {
case 1: /* 2.4GHz band */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1);
*eeprom_ch_array = iwl_eeprom_band_1;
break;
case 2: /* 4.9GHz band */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2);
*eeprom_ch_array = iwl_eeprom_band_2;
break;
case 3: /* 5.2GHz band */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3);
*eeprom_ch_array = iwl_eeprom_band_3;
break;
case 4: /* 5.5GHz band */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4);
*eeprom_ch_array = iwl_eeprom_band_4;
break;
case 5: /* 5.7GHz band */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5);
*eeprom_ch_array = iwl_eeprom_band_5;
break;
case 6: /* 2.4GHz ht40 channels */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6);
*eeprom_ch_array = iwl_eeprom_band_6;
break;
case 7: /* 5 GHz ht40 channels */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7);
*eeprom_ch_array = iwl_eeprom_band_7;
break;
default:
*eeprom_ch_count = 0;
*eeprom_ch_array = NULL;
WARN_ON(1);
}
}
#define CHECK_AND_PRINT(x) \
((eeprom_ch->flags & EEPROM_CHANNEL_##x) ? # x " " : "")
static void iwl_mod_ht40_chan_info(struct device *dev,
struct iwl_nvm_data *data, int n_channels,
enum nl80211_band band, u16 channel,
const struct iwl_eeprom_channel *eeprom_ch,
u8 clear_ht40_extension_channel)
{
struct ieee80211_channel *chan = NULL;
int i;
for (i = 0; i < n_channels; i++) {
if (data->channels[i].band != band)
continue;
if (data->channels[i].hw_value != channel)
continue;
chan = &data->channels[i];
break;
}
if (!chan)
return;
IWL_DEBUG_EEPROM(dev,
"HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
channel,
band == NL80211_BAND_5GHZ ? "5.2" : "2.4",
CHECK_AND_PRINT(IBSS),
CHECK_AND_PRINT(ACTIVE),
CHECK_AND_PRINT(RADAR),
CHECK_AND_PRINT(WIDE),
CHECK_AND_PRINT(DFS),
eeprom_ch->flags,
eeprom_ch->max_power_avg,
((eeprom_ch->flags & EEPROM_CHANNEL_IBSS) &&
!(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ? ""
: "not ");
if (eeprom_ch->flags & EEPROM_CHANNEL_VALID)
chan->flags &= ~clear_ht40_extension_channel;
}
#define CHECK_AND_PRINT_I(x) \
((eeprom_ch_info[ch_idx].flags & EEPROM_CHANNEL_##x) ? # x " " : "")
static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
struct iwl_nvm_data *data,
const u8 *eeprom, size_t eeprom_size)
{
int band, ch_idx;
const struct iwl_eeprom_channel *eeprom_ch_info;
const u8 *eeprom_ch_array;
int eeprom_ch_count;
int n_channels = 0;
/*
* Loop through the 5 EEPROM bands and add them to the parse list
*/
for (band = 1; band <= 5; band++) {
struct ieee80211_channel *channel;
iwl_init_band_reference(cfg, eeprom, eeprom_size, band,
&eeprom_ch_count, &eeprom_ch_info,
&eeprom_ch_array);
/* Loop through each band adding each of the channels */
for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) {
const struct iwl_eeprom_channel *eeprom_ch;
eeprom_ch = &eeprom_ch_info[ch_idx];
if (!(eeprom_ch->flags & EEPROM_CHANNEL_VALID)) {
IWL_DEBUG_EEPROM(dev,
"Ch. %d Flags %x [%sGHz] - No traffic\n",
eeprom_ch_array[ch_idx],
eeprom_ch_info[ch_idx].flags,
(band != 1) ? "5.2" : "2.4");
continue;
}
channel = &data->channels[n_channels];
n_channels++;
channel->hw_value = eeprom_ch_array[ch_idx];
channel->band = (band == 1) ? NL80211_BAND_2GHZ
: NL80211_BAND_5GHZ;
channel->center_freq =
ieee80211_channel_to_frequency(
channel->hw_value, channel->band);
/* set no-HT40, will enable as appropriate later */
channel->flags = IEEE80211_CHAN_NO_HT40;
if (!(eeprom_ch->flags & EEPROM_CHANNEL_IBSS))
channel->flags |= IEEE80211_CHAN_NO_IR;
if (!(eeprom_ch->flags & EEPROM_CHANNEL_ACTIVE))
channel->flags |= IEEE80211_CHAN_NO_IR;
if (eeprom_ch->flags & EEPROM_CHANNEL_RADAR)
channel->flags |= IEEE80211_CHAN_RADAR;
/* Initialize regulatory-based run-time data */
channel->max_power =
eeprom_ch_info[ch_idx].max_power_avg;
IWL_DEBUG_EEPROM(dev,
"Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
channel->hw_value,
(band != 1) ? "5.2" : "2.4",
CHECK_AND_PRINT_I(VALID),
CHECK_AND_PRINT_I(IBSS),
CHECK_AND_PRINT_I(ACTIVE),
CHECK_AND_PRINT_I(RADAR),
CHECK_AND_PRINT_I(WIDE),
CHECK_AND_PRINT_I(DFS),
eeprom_ch_info[ch_idx].flags,
eeprom_ch_info[ch_idx].max_power_avg,
((eeprom_ch_info[ch_idx].flags &
EEPROM_CHANNEL_IBSS) &&
!(eeprom_ch_info[ch_idx].flags &
EEPROM_CHANNEL_RADAR))
? "" : "not ");
}
}
if (cfg->eeprom_params->enhanced_txpower) {
/*
* for newer device (6000 series and up)
* EEPROM contain enhanced tx power information
* driver need to process addition information
* to determine the max channel tx power limits
*/
iwl_eeprom_enhanced_txpower(dev, data, eeprom, eeprom_size,
n_channels);
} else {
/* All others use data from channel map */
int i;
data->max_tx_pwr_half_dbm = -128;
for (i = 0; i < n_channels; i++)
data->max_tx_pwr_half_dbm =
max_t(s8, data->max_tx_pwr_half_dbm,
data->channels[i].max_power * 2);
}
/* Check if we do have HT40 channels */
if (cfg->eeprom_params->regulatory_bands[5] ==
EEPROM_REGULATORY_BAND_NO_HT40 &&
cfg->eeprom_params->regulatory_bands[6] ==
EEPROM_REGULATORY_BAND_NO_HT40)
return n_channels;
/* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
for (band = 6; band <= 7; band++) {
enum nl80211_band ieeeband;
iwl_init_band_reference(cfg, eeprom, eeprom_size, band,
&eeprom_ch_count, &eeprom_ch_info,
&eeprom_ch_array);
/* EEPROM band 6 is 2.4, band 7 is 5 GHz */
ieeeband = (band == 6) ? NL80211_BAND_2GHZ
: NL80211_BAND_5GHZ;
/* Loop through each band adding each of the channels */
for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) {
/* Set up driver's info for lower half */
iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband,
eeprom_ch_array[ch_idx],
&eeprom_ch_info[ch_idx],
IEEE80211_CHAN_NO_HT40PLUS);
/* Set up driver's info for upper half */
iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband,
eeprom_ch_array[ch_idx] + 4,
&eeprom_ch_info[ch_idx],
IEEE80211_CHAN_NO_HT40MINUS);
}
}
return n_channels;
}
/*
* EEPROM access time values:
*
* Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG.
* Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1).
* When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec.
* Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
*/
#define IWL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */
/*
* The device's EEPROM semaphore prevents conflicts between driver and uCode
* when accessing the EEPROM; each access is a series of pulses to/from the
* EEPROM chip, not a single event, so even reads could conflict if they
* weren't arbitrated by the semaphore.
*/
#define IWL_EEPROM_SEM_TIMEOUT 10 /* microseconds */
#define IWL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
static int iwl_eeprom_acquire_semaphore(struct iwl_trans *trans)
{
u16 count;
int ret;
for (count = 0; count < IWL_EEPROM_SEM_RETRY_LIMIT; count++) {
/* Request semaphore */
iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_EEPROM_OWN_SEM);
/* See if we got it */
ret = iwl_poll_bit(trans, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_EEPROM_OWN_SEM,
CSR_HW_IF_CONFIG_REG_EEPROM_OWN_SEM,
IWL_EEPROM_SEM_TIMEOUT);
if (ret >= 0) {
IWL_DEBUG_EEPROM(trans->dev,
"Acquired semaphore after %d tries.\n",
count+1);
return ret;
}
}
return ret;
}
static void iwl_eeprom_release_semaphore(struct iwl_trans *trans)
{
iwl_clear_bit(trans, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_EEPROM_OWN_SEM);
}
static int iwl_eeprom_verify_signature(struct iwl_trans *trans, bool nvm_is_otp)
{
u32 gp = iwl_read32(trans, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
IWL_DEBUG_EEPROM(trans->dev, "EEPROM signature=0x%08x\n", gp);
switch (gp) {
case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP:
if (!nvm_is_otp) {
IWL_ERR(trans, "EEPROM with bad signature: 0x%08x\n",
gp);
return -ENOENT;
}
return 0;
case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K:
case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K:
if (nvm_is_otp) {
IWL_ERR(trans, "OTP with bad signature: 0x%08x\n", gp);
return -ENOENT;
}
return 0;
case CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP:
default:
IWL_ERR(trans,
"bad EEPROM/OTP signature, type=%s, EEPROM_GP=0x%08x\n",
nvm_is_otp ? "OTP" : "EEPROM", gp);
return -ENOENT;
}
}
/******************************************************************************
*
* OTP related functions
*
******************************************************************************/
static void iwl_set_otp_access_absolute(struct iwl_trans *trans)
{
iwl_read32(trans, CSR_OTP_GP_REG);
iwl_clear_bit(trans, CSR_OTP_GP_REG,
CSR_OTP_GP_REG_OTP_ACCESS_MODE);
}
static int iwl_nvm_is_otp(struct iwl_trans *trans)
{
u32 otpgp;
/* OTP only valid for CP/PP and after */
switch (trans->hw_rev & CSR_HW_REV_TYPE_MSK) {
case CSR_HW_REV_TYPE_NONE:
IWL_ERR(trans, "Unknown hardware type\n");
return -EIO;
case CSR_HW_REV_TYPE_5300:
case CSR_HW_REV_TYPE_5350:
case CSR_HW_REV_TYPE_5100:
case CSR_HW_REV_TYPE_5150:
return 0;
default:
otpgp = iwl_read32(trans, CSR_OTP_GP_REG);
if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT)
return 1;
return 0;
}
}
static int iwl_init_otp_access(struct iwl_trans *trans)
{
int ret;
ret = iwl_finish_nic_init(trans);
if (ret)
return ret;
iwl_set_bits_prph(trans, APMG_PS_CTRL_REG,
APMG_PS_CTRL_VAL_RESET_REQ);
udelay(5);
iwl_clear_bits_prph(trans, APMG_PS_CTRL_REG,
APMG_PS_CTRL_VAL_RESET_REQ);
/*
* CSR auto clock gate disable bit -
* this is only applicable for HW with OTP shadow RAM
*/
if (trans->trans_cfg->base_params->shadow_ram_support)
iwl_set_bit(trans, CSR_DBG_LINK_PWR_MGMT_REG,
CSR_RESET_LINK_PWR_MGMT_DISABLED);
return 0;
}
static int iwl_read_otp_word(struct iwl_trans *trans, u16 addr,
__le16 *eeprom_data)
{
int ret = 0;
u32 r;
u32 otpgp;
iwl_write32(trans, CSR_EEPROM_REG,
CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
ret = iwl_poll_bit(trans, CSR_EEPROM_REG,
CSR_EEPROM_REG_READ_VALID_MSK,
CSR_EEPROM_REG_READ_VALID_MSK,
IWL_EEPROM_ACCESS_TIMEOUT);
if (ret < 0) {
IWL_ERR(trans, "Time out reading OTP[%d]\n", addr);
return ret;
}
r = iwl_read32(trans, CSR_EEPROM_REG);
/* check for ECC errors: */
otpgp = iwl_read32(trans, CSR_OTP_GP_REG);
if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
/* stop in this case */
/* set the uncorrectable OTP ECC bit for acknowledgment */
iwl_set_bit(trans, CSR_OTP_GP_REG,
CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
IWL_ERR(trans, "Uncorrectable OTP ECC error, abort OTP read\n");
return -EINVAL;
}
if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
/* continue in this case */
/* set the correctable OTP ECC bit for acknowledgment */
iwl_set_bit(trans, CSR_OTP_GP_REG,
CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
IWL_ERR(trans, "Correctable OTP ECC error, continue read\n");
}
*eeprom_data = cpu_to_le16(r >> 16);
return 0;
}
/*
* iwl_is_otp_empty: check for empty OTP
*/
static bool iwl_is_otp_empty(struct iwl_trans *trans)
{
u16 next_link_addr = 0;
__le16 link_value;
bool is_empty = false;
/* locate the beginning of OTP link list */
if (!iwl_read_otp_word(trans, next_link_addr, &link_value)) {
if (!link_value) {
IWL_ERR(trans, "OTP is empty\n");
is_empty = true;
}
} else {
IWL_ERR(trans, "Unable to read first block of OTP list.\n");
is_empty = true;
}
return is_empty;
}
/*
* iwl_find_otp_image: find EEPROM image in OTP
* finding the OTP block that contains the EEPROM image.
* the last valid block on the link list (the block _before_ the last block)
* is the block we should read and used to configure the device.
* If all the available OTP blocks are full, the last block will be the block
* we should read and used to configure the device.
* only perform this operation if shadow RAM is disabled
*/
static int iwl_find_otp_image(struct iwl_trans *trans,
u16 *validblockaddr)
{
u16 next_link_addr = 0, valid_addr;
__le16 link_value = 0;
int usedblocks = 0;
/* set addressing mode to absolute to traverse the link list */
iwl_set_otp_access_absolute(trans);
/* checking for empty OTP or error */
if (iwl_is_otp_empty(trans))
return -EINVAL;
/*
* start traverse link list
* until reach the max number of OTP blocks
* different devices have different number of OTP blocks
*/
do {
/* save current valid block address
* check for more block on the link list
*/
valid_addr = next_link_addr;
next_link_addr = le16_to_cpu(link_value) * sizeof(u16);
IWL_DEBUG_EEPROM(trans->dev, "OTP blocks %d addr 0x%x\n",
usedblocks, next_link_addr);
if (iwl_read_otp_word(trans, next_link_addr, &link_value))
return -EINVAL;
if (!link_value) {
/*
* reach the end of link list, return success and
* set address point to the starting address
* of the image
*/
*validblockaddr = valid_addr;
/* skip first 2 bytes (link list pointer) */
*validblockaddr += 2;
return 0;
}
/* more in the link list, continue */
usedblocks++;
} while (usedblocks <= trans->trans_cfg->base_params->max_ll_items);
/* OTP has no valid blocks */
IWL_DEBUG_EEPROM(trans->dev, "OTP has no valid blocks\n");
return -EINVAL;
}
/*
* iwl_read_eeprom - read EEPROM contents
*
* Load the EEPROM contents from adapter and return it
* and its size.
*
* NOTE: This routine uses the non-debug IO access functions.
*/
int iwl_read_eeprom(struct iwl_trans *trans, u8 **eeprom, size_t *eeprom_size)
{
__le16 *e;
u32 gp = iwl_read32(trans, CSR_EEPROM_GP);
int sz;
int ret;
u16 addr;
u16 validblockaddr = 0;
u16 cache_addr = 0;
int nvm_is_otp;
if (!eeprom || !eeprom_size)
return -EINVAL;
nvm_is_otp = iwl_nvm_is_otp(trans);
if (nvm_is_otp < 0)
return nvm_is_otp;
sz = trans->trans_cfg->base_params->eeprom_size;
IWL_DEBUG_EEPROM(trans->dev, "NVM size = %d\n", sz);
e = kmalloc(sz, GFP_KERNEL);
if (!e)
return -ENOMEM;
ret = iwl_eeprom_verify_signature(trans, nvm_is_otp);
if (ret < 0) {
IWL_ERR(trans, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
goto err_free;
}
/* Make sure driver (instead of uCode) is allowed to read EEPROM */
ret = iwl_eeprom_acquire_semaphore(trans);
if (ret < 0) {
IWL_ERR(trans, "Failed to acquire EEPROM semaphore.\n");
goto err_free;
}
if (nvm_is_otp) {
ret = iwl_init_otp_access(trans);
if (ret) {
IWL_ERR(trans, "Failed to initialize OTP access.\n");
goto err_unlock;
}
iwl_write32(trans, CSR_EEPROM_GP,
iwl_read32(trans, CSR_EEPROM_GP) &
~CSR_EEPROM_GP_IF_OWNER_MSK);
iwl_set_bit(trans, CSR_OTP_GP_REG,
CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
/* traversing the linked list if no shadow ram supported */
if (!trans->trans_cfg->base_params->shadow_ram_support) {
ret = iwl_find_otp_image(trans, &validblockaddr);
if (ret)
goto err_unlock;
}
for (addr = validblockaddr; addr < validblockaddr + sz;
addr += sizeof(u16)) {
__le16 eeprom_data;
ret = iwl_read_otp_word(trans, addr, &eeprom_data);
if (ret)
goto err_unlock;
e[cache_addr / 2] = eeprom_data;
cache_addr += sizeof(u16);
}
} else {
/* eeprom is an array of 16bit values */
for (addr = 0; addr < sz; addr += sizeof(u16)) {
u32 r;
iwl_write32(trans, CSR_EEPROM_REG,
CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
ret = iwl_poll_bit(trans, CSR_EEPROM_REG,
CSR_EEPROM_REG_READ_VALID_MSK,
CSR_EEPROM_REG_READ_VALID_MSK,
IWL_EEPROM_ACCESS_TIMEOUT);
if (ret < 0) {
IWL_ERR(trans,
"Time out reading EEPROM[%d]\n", addr);
goto err_unlock;
}
r = iwl_read32(trans, CSR_EEPROM_REG);
e[addr / 2] = cpu_to_le16(r >> 16);
}
}
IWL_DEBUG_EEPROM(trans->dev, "NVM Type: %s\n",
nvm_is_otp ? "OTP" : "EEPROM");
iwl_eeprom_release_semaphore(trans);
*eeprom_size = sz;
*eeprom = (u8 *)e;
return 0;
err_unlock:
iwl_eeprom_release_semaphore(trans);
err_free:
kfree(e);
return ret;
}
static void iwl_init_sbands(struct iwl_trans *trans, const struct iwl_cfg *cfg,
struct iwl_nvm_data *data,
const u8 *eeprom, size_t eeprom_size)
{
struct device *dev = trans->dev;
int n_channels = iwl_init_channel_map(dev, cfg, data,
eeprom, eeprom_size);
int n_used = 0;
struct ieee80211_supported_band *sband;
sband = &data->bands[NL80211_BAND_2GHZ];
sband->band = NL80211_BAND_2GHZ;
sband->bitrates = &iwl_cfg80211_rates[RATES_24_OFFS];
sband->n_bitrates = N_RATES_24;
n_used += iwl_init_sband_channels(data, sband, n_channels,
NL80211_BAND_2GHZ);
iwl_init_ht_hw_capab(trans, data, &sband->ht_cap, NL80211_BAND_2GHZ,
data->valid_tx_ant, data->valid_rx_ant);
sband = &data->bands[NL80211_BAND_5GHZ];
sband->band = NL80211_BAND_5GHZ;
sband->bitrates = &iwl_cfg80211_rates[RATES_52_OFFS];
sband->n_bitrates = N_RATES_52;
n_used += iwl_init_sband_channels(data, sband, n_channels,
NL80211_BAND_5GHZ);
iwl_init_ht_hw_capab(trans, data, &sband->ht_cap, NL80211_BAND_5GHZ,
data->valid_tx_ant, data->valid_rx_ant);
if (n_channels != n_used)
IWL_ERR_DEV(dev, "EEPROM: used only %d of %d channels\n",
n_used, n_channels);
}
/* EEPROM data functions */
struct iwl_nvm_data *
iwl_parse_eeprom_data(struct iwl_trans *trans, const struct iwl_cfg *cfg,
const u8 *eeprom, size_t eeprom_size)
{
struct iwl_nvm_data *data;
struct device *dev = trans->dev;
const void *tmp;
u16 radio_cfg, sku;
if (WARN_ON(!cfg || !cfg->eeprom_params))
return NULL;
data = kzalloc(struct_size(data, channels, IWL_NUM_CHANNELS),
GFP_KERNEL);
if (!data)
return NULL;
/* get MAC address(es) */
tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_MAC_ADDRESS);
if (!tmp)
goto err_free;
memcpy(data->hw_addr, tmp, ETH_ALEN);
data->n_hw_addrs = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_NUM_MAC_ADDRESS);
if (iwl_eeprom_read_calib(eeprom, eeprom_size, data))
goto err_free;
tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_XTAL);
if (!tmp)
goto err_free;
memcpy(data->xtal_calib, tmp, sizeof(data->xtal_calib));
tmp = iwl_eeprom_query_addr(eeprom, eeprom_size,
EEPROM_RAW_TEMPERATURE);
if (!tmp)
goto err_free;
data->raw_temperature = *(__le16 *)tmp;
tmp = iwl_eeprom_query_addr(eeprom, eeprom_size,
EEPROM_KELVIN_TEMPERATURE);
if (!tmp)
goto err_free;
data->kelvin_temperature = *(__le16 *)tmp;
data->kelvin_voltage = *((__le16 *)tmp + 1);
radio_cfg =
iwl_eeprom_query16(eeprom, eeprom_size, EEPROM_RADIO_CONFIG);
data->radio_cfg_dash = EEPROM_RF_CFG_DASH_MSK(radio_cfg);
data->radio_cfg_pnum = EEPROM_RF_CFG_PNUM_MSK(radio_cfg);
data->radio_cfg_step = EEPROM_RF_CFG_STEP_MSK(radio_cfg);
data->radio_cfg_type = EEPROM_RF_CFG_TYPE_MSK(radio_cfg);
data->valid_rx_ant = EEPROM_RF_CFG_RX_ANT_MSK(radio_cfg);
data->valid_tx_ant = EEPROM_RF_CFG_TX_ANT_MSK(radio_cfg);
sku = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_SKU_CAP);
data->sku_cap_11n_enable = sku & EEPROM_SKU_CAP_11N_ENABLE;
data->sku_cap_amt_enable = sku & EEPROM_SKU_CAP_AMT_ENABLE;
data->sku_cap_band_24ghz_enable = sku & EEPROM_SKU_CAP_BAND_24GHZ;
data->sku_cap_band_52ghz_enable = sku & EEPROM_SKU_CAP_BAND_52GHZ;
data->sku_cap_ipan_enable = sku & EEPROM_SKU_CAP_IPAN_ENABLE;
if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
data->sku_cap_11n_enable = false;
data->nvm_version = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_VERSION);
/* check overrides (some devices have wrong EEPROM) */
if (cfg->valid_tx_ant)
data->valid_tx_ant = cfg->valid_tx_ant;
if (cfg->valid_rx_ant)
data->valid_rx_ant = cfg->valid_rx_ant;
if (!data->valid_tx_ant || !data->valid_rx_ant) {
IWL_ERR_DEV(dev, "invalid antennas (0x%x, 0x%x)\n",
data->valid_tx_ant, data->valid_rx_ant);
goto err_free;
}
iwl_init_sbands(trans, cfg, data, eeprom, eeprom_size);
return data;
err_free:
kfree(data);
return NULL;
}
Reference in New Issue View Git Blame Copy Permalink