Qingmin Liu aa1996e201 phy: bcm-sr-pcie: Change operation when PIPEMUX=1 ...

When PIPEMIX=1, change the operation from 2x8 EP to 1x8 EP + 1x8 RC.

Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

2019-02-07 11:11:06 +05:30

..

Kconfig

phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs

2018-09-25 16:10:08 +05:30

Makefile

phy: bcm-sr-pcie: Add Stingray PCIe PHY driver

2018-07-10 13:45:10 +05:30

phy-bcm-cygnus-pcie.c

phy: Convert to using %pOFn instead of device_node.name

2018-09-25 16:10:07 +05:30

phy-bcm-kona-usb2.c

phy: Group vendor specific phy drivers

2017-06-01 15:28:33 +05:30

phy-bcm-ns2-pcie.c

phy: Group vendor specific phy drivers

2017-06-01 15:28:33 +05:30

phy-bcm-ns2-usbdrd.c

extcon: Split out extcon header file for consumer and provider device

2017-10-23 14:07:58 +09:00

phy-bcm-ns-usb2.c

phy: Group vendor specific phy drivers

2017-06-01 15:28:33 +05:30

phy-bcm-ns-usb3.c

phy: bcm-ns-usb3: add MDIO driver using proper bus layer

2017-06-16 13:22:26 +05:30

phy-bcm-sr-pcie.c

phy: bcm-sr-pcie: Change operation when PIPEMUX=1

2019-02-07 11:11:06 +05:30

phy-brcm-sata.c

phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence

2018-09-25 16:10:08 +05:30

phy-brcm-usb-init.c

phy: phy-brcm-usb-init: Fix power down USB 3.0 PHY when XHCI reenabled

2018-06-29 12:00:22 +05:30

phy-brcm-usb-init.h

phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver

2017-10-03 11:54:54 +05:30

phy-brcm-usb.c

phy:phy-brcm-usb: Use PTR_ERR_OR_ZERO to replace the open coded version

2018-09-10 14:28:21 +05:30