Files
linux/drivers/net/mdio/fwnode_mdio.c
Alexander Dahl 525034e2e2 net: mdiobus: Debug print fwnode handle instead of raw pointer
Was slightly misleading before, because printed is pointer to fwnode,
not to phy device, as placement in message suggested.  Include header
for dev_dbg() declaration while at it.

Output before:

    [  +0.001247] mdio_bus f802c000.ethernet-ffffffff: registered phy 2612f00a fwnode at address 3

Output after:

    [  +0.001229] mdio_bus f802c000.ethernet-ffffffff: registered phy fwnode /ahb/apb/ethernet@f802c000/ethernet-phy@3 at address 3

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://patch.msgid.link/20240906062256.11289-1-ada@thorsis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-10 12:24:17 +02:00

186 lines
4.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* fwnode helpers for the MDIO (Ethernet PHY) API
*
* This file provides helper functions for extracting PHY device information
* out of the fwnode and using it to populate an mii_bus.
*/
#include <linux/acpi.h>
#include <linux/dev_printk.h>
#include <linux/fwnode_mdio.h>
#include <linux/of.h>
#include <linux/phy.h>
#include <linux/pse-pd/pse.h>
MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("FWNODE MDIO bus (Ethernet PHY) accessors");
static struct pse_control *
fwnode_find_pse_control(struct fwnode_handle *fwnode)
{
struct pse_control *psec;
struct device_node *np;
if (!IS_ENABLED(CONFIG_PSE_CONTROLLER))
return NULL;
np = to_of_node(fwnode);
if (!np)
return NULL;
psec = of_pse_control_get(np);
if (PTR_ERR(psec) == -ENOENT)
return NULL;
return psec;
}
static struct mii_timestamper *
fwnode_find_mii_timestamper(struct fwnode_handle *fwnode)
{
struct of_phandle_args arg;
int err;
if (is_acpi_node(fwnode))
return NULL;
err = of_parse_phandle_with_fixed_args(to_of_node(fwnode),
"timestamper", 1, 0, &arg);
if (err == -ENOENT)
return NULL;
else if (err)
return ERR_PTR(err);
if (arg.args_count != 1)
return ERR_PTR(-EINVAL);
return register_mii_timestamper(arg.np, arg.args[0]);
}
int fwnode_mdiobus_phy_device_register(struct mii_bus *mdio,
struct phy_device *phy,
struct fwnode_handle *child, u32 addr)
{
int rc;
rc = fwnode_irq_get(child, 0);
/* Don't wait forever if the IRQ provider doesn't become available,
* just fall back to poll mode
*/
if (rc == -EPROBE_DEFER)
rc = driver_deferred_probe_check_state(&phy->mdio.dev);
if (rc == -EPROBE_DEFER)
return rc;
if (rc > 0) {
phy->irq = rc;
mdio->irq[addr] = rc;
} else {
phy->irq = mdio->irq[addr];
}
if (fwnode_property_read_bool(child, "broken-turn-around"))
mdio->phy_ignore_ta_mask |= 1 << addr;
fwnode_property_read_u32(child, "reset-assert-us",
&phy->mdio.reset_assert_delay);
fwnode_property_read_u32(child, "reset-deassert-us",
&phy->mdio.reset_deassert_delay);
/* Associate the fwnode with the device structure so it
* can be looked up later
*/
fwnode_handle_get(child);
device_set_node(&phy->mdio.dev, child);
/* All data is now stored in the phy struct;
* register it
*/
rc = phy_device_register(phy);
if (rc) {
device_set_node(&phy->mdio.dev, NULL);
fwnode_handle_put(child);
return rc;
}
dev_dbg(&mdio->dev, "registered phy fwnode %pfw at address %i\n",
child, addr);
return 0;
}
EXPORT_SYMBOL(fwnode_mdiobus_phy_device_register);
int fwnode_mdiobus_register_phy(struct mii_bus *bus,
struct fwnode_handle *child, u32 addr)
{
struct mii_timestamper *mii_ts = NULL;
struct pse_control *psec = NULL;
struct phy_device *phy;
bool is_c45;
u32 phy_id;
int rc;
psec = fwnode_find_pse_control(child);
if (IS_ERR(psec))
return PTR_ERR(psec);
mii_ts = fwnode_find_mii_timestamper(child);
if (IS_ERR(mii_ts)) {
rc = PTR_ERR(mii_ts);
goto clean_pse;
}
is_c45 = fwnode_device_is_compatible(child, "ethernet-phy-ieee802.3-c45");
if (is_c45 || fwnode_get_phy_id(child, &phy_id))
phy = get_phy_device(bus, addr, is_c45);
else
phy = phy_device_create(bus, addr, phy_id, 0, NULL);
if (IS_ERR(phy)) {
rc = PTR_ERR(phy);
goto clean_mii_ts;
}
if (is_acpi_node(child)) {
phy->irq = bus->irq[addr];
/* Associate the fwnode with the device structure so it
* can be looked up later.
*/
phy->mdio.dev.fwnode = fwnode_handle_get(child);
/* All data is now stored in the phy struct, so register it */
rc = phy_device_register(phy);
if (rc) {
phy->mdio.dev.fwnode = NULL;
fwnode_handle_put(child);
goto clean_phy;
}
} else if (is_of_node(child)) {
rc = fwnode_mdiobus_phy_device_register(bus, phy, child, addr);
if (rc)
goto clean_phy;
}
phy->psec = psec;
/* phy->mii_ts may already be defined by the PHY driver. A
* mii_timestamper probed via the device tree will still have
* precedence.
*/
if (mii_ts)
phy->mii_ts = mii_ts;
return 0;
clean_phy:
phy_device_free(phy);
clean_mii_ts:
unregister_mii_timestamper(mii_ts);
clean_pse:
pse_control_put(psec);
return rc;
}
EXPORT_SYMBOL(fwnode_mdiobus_register_phy);