Files
linux/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
Srinivas Pandruvada 5bc6b1df65 thermal: intel: int340x: Add DLVR support for RFIM control
Add support for DLVR (Digital Linear Voltage Regulator) attributes,
which can be used to control RFIM.

Here instead of "fivr" another directory "dlvr" is created with DLVR
attributes:

/sys/bus/pci/devices/0000:00:04.0/dlvr
├── dlvr_freq_mhz
├── dlvr_freq_select
├── dlvr_hardware_rev
├── dlvr_pll_busy
├── dlvr_rfim_enable
└── dlvr_spread_spectrum_pct
└── dlvr_control_mode
└── dlvr_control_lock

Attributes
dlvr_freq_mhz (RO):
Current DLVR PLL frequency in MHz.

dlvr_freq_select (RW):
Sets DLVR PLL clock frequency.

dlvr_hardware_rev (RO):
DLVR hardware revision.

dlvr_pll_busy (RO):
PLL can't accept frequency change when set.

dlvr_rfim_enable (RW):
0: Disable RF frequency hopping, 1: Enable RF frequency hopping.

dlvr_control_mode (RW):
Specifies how frequencies are spread. 0: Down spread, 1: Spread in Center.

dlvr_control_lock (RW):
1: future writes are ignored.

dlvr_spread_spectrum_pct (RW)
A write to this register updates the DLVR spread spectrum percent value.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-18 15:24:40 +02:00

386 lines
9.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* processor_thermal_device.c
* Copyright (c) 2014, Intel Corporation.
*/
#include <linux/acpi.h>
#include <linux/intel_tcc.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/thermal.h>
#include "int340x_thermal_zone.h"
#include "processor_thermal_device.h"
#include "../intel_soc_dts_iosf.h"
#define DRV_NAME "proc_thermal"
#define POWER_LIMIT_SHOW(index, suffix) \
static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{ \
struct proc_thermal_device *proc_dev = dev_get_drvdata(dev); \
\
return sprintf(buf, "%lu\n",\
(unsigned long)proc_dev->power_limits[index].suffix * 1000); \
}
POWER_LIMIT_SHOW(0, min_uw)
POWER_LIMIT_SHOW(0, max_uw)
POWER_LIMIT_SHOW(0, step_uw)
POWER_LIMIT_SHOW(0, tmin_us)
POWER_LIMIT_SHOW(0, tmax_us)
POWER_LIMIT_SHOW(1, min_uw)
POWER_LIMIT_SHOW(1, max_uw)
POWER_LIMIT_SHOW(1, step_uw)
POWER_LIMIT_SHOW(1, tmin_us)
POWER_LIMIT_SHOW(1, tmax_us)
static DEVICE_ATTR_RO(power_limit_0_min_uw);
static DEVICE_ATTR_RO(power_limit_0_max_uw);
static DEVICE_ATTR_RO(power_limit_0_step_uw);
static DEVICE_ATTR_RO(power_limit_0_tmin_us);
static DEVICE_ATTR_RO(power_limit_0_tmax_us);
static DEVICE_ATTR_RO(power_limit_1_min_uw);
static DEVICE_ATTR_RO(power_limit_1_max_uw);
static DEVICE_ATTR_RO(power_limit_1_step_uw);
static DEVICE_ATTR_RO(power_limit_1_tmin_us);
static DEVICE_ATTR_RO(power_limit_1_tmax_us);
static struct attribute *power_limit_attrs[] = {
&dev_attr_power_limit_0_min_uw.attr,
&dev_attr_power_limit_1_min_uw.attr,
&dev_attr_power_limit_0_max_uw.attr,
&dev_attr_power_limit_1_max_uw.attr,
&dev_attr_power_limit_0_step_uw.attr,
&dev_attr_power_limit_1_step_uw.attr,
&dev_attr_power_limit_0_tmin_us.attr,
&dev_attr_power_limit_1_tmin_us.attr,
&dev_attr_power_limit_0_tmax_us.attr,
&dev_attr_power_limit_1_tmax_us.attr,
NULL
};
static const struct attribute_group power_limit_attribute_group = {
.attrs = power_limit_attrs,
.name = "power_limits"
};
static ssize_t tcc_offset_degree_celsius_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int offset;
offset = intel_tcc_get_offset(-1);
if (offset < 0)
return offset;
return sprintf(buf, "%d\n", offset);
}
static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
unsigned int tcc;
u64 val;
int err;
err = rdmsrl_safe(MSR_PLATFORM_INFO, &val);
if (err)
return err;
if (!(val & BIT(30)))
return -EACCES;
if (kstrtouint(buf, 0, &tcc))
return -EINVAL;
err = intel_tcc_set_offset(-1, tcc);
if (err)
return err;
return count;
}
static DEVICE_ATTR_RW(tcc_offset_degree_celsius);
static int proc_thermal_get_zone_temp(struct thermal_zone_device *zone,
int *temp)
{
int cpu;
int curr_temp;
*temp = 0;
for_each_online_cpu(cpu) {
curr_temp = intel_tcc_get_temp(cpu, false);
if (curr_temp < 0)
return curr_temp;
if (!*temp || curr_temp > *temp)
*temp = curr_temp;
}
*temp *= 1000;
return 0;
}
static int proc_thermal_read_ppcc(struct proc_thermal_device *proc_priv)
{
int i;
acpi_status status;
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *elements, *ppcc;
union acpi_object *p;
int ret = 0;
status = acpi_evaluate_object(proc_priv->adev->handle, "PPCC",
NULL, &buf);
if (ACPI_FAILURE(status))
return -ENODEV;
p = buf.pointer;
if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
dev_err(proc_priv->dev, "Invalid PPCC data\n");
ret = -EFAULT;
goto free_buffer;
}
if (!p->package.count) {
dev_err(proc_priv->dev, "Invalid PPCC package size\n");
ret = -EFAULT;
goto free_buffer;
}
for (i = 0; i < min((int)p->package.count - 1, 2); ++i) {
elements = &(p->package.elements[i+1]);
if (elements->type != ACPI_TYPE_PACKAGE ||
elements->package.count != 6) {
ret = -EFAULT;
goto free_buffer;
}
ppcc = elements->package.elements;
proc_priv->power_limits[i].index = ppcc[0].integer.value;
proc_priv->power_limits[i].min_uw = ppcc[1].integer.value;
proc_priv->power_limits[i].max_uw = ppcc[2].integer.value;
proc_priv->power_limits[i].tmin_us = ppcc[3].integer.value;
proc_priv->power_limits[i].tmax_us = ppcc[4].integer.value;
proc_priv->power_limits[i].step_uw = ppcc[5].integer.value;
}
free_buffer:
kfree(buf.pointer);
return ret;
}
#define PROC_POWER_CAPABILITY_CHANGED 0x83
static void proc_thermal_notify(acpi_handle handle, u32 event, void *data)
{
struct proc_thermal_device *proc_priv = data;
if (!proc_priv)
return;
switch (event) {
case PROC_POWER_CAPABILITY_CHANGED:
proc_thermal_read_ppcc(proc_priv);
int340x_thermal_zone_device_update(proc_priv->int340x_zone,
THERMAL_DEVICE_POWER_CAPABILITY_CHANGED);
break;
default:
dev_dbg(proc_priv->dev, "Unsupported event [0x%x]\n", event);
break;
}
}
int proc_thermal_add(struct device *dev, struct proc_thermal_device *proc_priv)
{
struct acpi_device *adev;
acpi_status status;
unsigned long long tmp;
int (*get_temp) (struct thermal_zone_device *, int *) = NULL;
int ret;
adev = ACPI_COMPANION(dev);
if (!adev)
return -ENODEV;
proc_priv->dev = dev;
proc_priv->adev = adev;
ret = proc_thermal_read_ppcc(proc_priv);
if (ret)
return ret;
status = acpi_evaluate_integer(adev->handle, "_TMP", NULL, &tmp);
if (ACPI_FAILURE(status)) {
/* there is no _TMP method, add local method */
if (intel_tcc_get_tjmax(-1) > 0)
get_temp = proc_thermal_get_zone_temp;
}
proc_priv->int340x_zone = int340x_thermal_zone_add(adev, get_temp);
if (IS_ERR(proc_priv->int340x_zone)) {
return PTR_ERR(proc_priv->int340x_zone);
} else
ret = 0;
ret = acpi_install_notify_handler(adev->handle, ACPI_DEVICE_NOTIFY,
proc_thermal_notify,
(void *)proc_priv);
if (ret)
goto remove_zone;
ret = sysfs_create_file(&dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr);
if (ret)
goto remove_notify;
ret = sysfs_create_group(&dev->kobj, &power_limit_attribute_group);
if (ret) {
sysfs_remove_file(&dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr);
goto remove_notify;
}
return 0;
remove_notify:
acpi_remove_notify_handler(adev->handle,
ACPI_DEVICE_NOTIFY, proc_thermal_notify);
remove_zone:
int340x_thermal_zone_remove(proc_priv->int340x_zone);
return ret;
}
EXPORT_SYMBOL_GPL(proc_thermal_add);
void proc_thermal_remove(struct proc_thermal_device *proc_priv)
{
acpi_remove_notify_handler(proc_priv->adev->handle,
ACPI_DEVICE_NOTIFY, proc_thermal_notify);
int340x_thermal_zone_remove(proc_priv->int340x_zone);
sysfs_remove_file(&proc_priv->dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr);
sysfs_remove_group(&proc_priv->dev->kobj,
&power_limit_attribute_group);
}
EXPORT_SYMBOL_GPL(proc_thermal_remove);
static int tcc_offset_save = -1;
int proc_thermal_suspend(struct device *dev)
{
tcc_offset_save = intel_tcc_get_offset(-1);
if (tcc_offset_save < 0)
dev_warn(dev, "failed to save offset (%d)\n", tcc_offset_save);
return 0;
}
EXPORT_SYMBOL_GPL(proc_thermal_suspend);
int proc_thermal_resume(struct device *dev)
{
struct proc_thermal_device *proc_dev;
proc_dev = dev_get_drvdata(dev);
proc_thermal_read_ppcc(proc_dev);
/* Do not update if saving failed */
if (tcc_offset_save >= 0)
intel_tcc_set_offset(-1, tcc_offset_save);
return 0;
}
EXPORT_SYMBOL_GPL(proc_thermal_resume);
#define MCHBAR 0
static int proc_thermal_set_mmio_base(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
{
int ret;
ret = pcim_iomap_regions(pdev, 1 << MCHBAR, DRV_NAME);
if (ret) {
dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
return -ENOMEM;
}
proc_priv->mmio_base = pcim_iomap_table(pdev)[MCHBAR];
return 0;
}
int proc_thermal_mmio_add(struct pci_dev *pdev,
struct proc_thermal_device *proc_priv,
kernel_ulong_t feature_mask)
{
int ret;
proc_priv->mmio_feature_mask = feature_mask;
if (feature_mask) {
ret = proc_thermal_set_mmio_base(pdev, proc_priv);
if (ret)
return ret;
}
if (feature_mask & PROC_THERMAL_FEATURE_RAPL) {
ret = proc_thermal_rapl_add(pdev, proc_priv);
if (ret) {
dev_err(&pdev->dev, "failed to add RAPL MMIO interface\n");
return ret;
}
}
if (feature_mask & PROC_THERMAL_FEATURE_FIVR ||
feature_mask & PROC_THERMAL_FEATURE_DVFS ||
feature_mask & PROC_THERMAL_FEATURE_DLVR) {
ret = proc_thermal_rfim_add(pdev, proc_priv);
if (ret) {
dev_err(&pdev->dev, "failed to add RFIM interface\n");
goto err_rem_rapl;
}
}
if (feature_mask & PROC_THERMAL_FEATURE_MBOX) {
ret = proc_thermal_mbox_add(pdev, proc_priv);
if (ret) {
dev_err(&pdev->dev, "failed to add MBOX interface\n");
goto err_rem_rfim;
}
}
return 0;
err_rem_rfim:
proc_thermal_rfim_remove(pdev);
err_rem_rapl:
proc_thermal_rapl_remove();
return ret;
}
EXPORT_SYMBOL_GPL(proc_thermal_mmio_add);
void proc_thermal_mmio_remove(struct pci_dev *pdev, struct proc_thermal_device *proc_priv)
{
if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_RAPL)
proc_thermal_rapl_remove();
if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR ||
proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DVFS)
proc_thermal_rfim_remove(pdev);
if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_MBOX)
proc_thermal_mbox_remove(pdev);
}
EXPORT_SYMBOL_GPL(proc_thermal_mmio_remove);
MODULE_IMPORT_NS(INTEL_TCC);
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
MODULE_LICENSE("GPL v2");