mirror of
https://github.com/raspberrypi/linux.git
synced 2025-12-06 01:49:46 +00:00
Corrects typo that set that register to only be 8 bit.
Fixes: 773621829a ("media: imx477: Convert to use V4L2_CCI library")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2280 lines
60 KiB
C
2280 lines
60 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* A V4L2 driver for Sony IMX477 cameras.
|
|
* Copyright (C) 2020, Raspberry Pi (Trading) Ltd
|
|
*
|
|
* Based on Sony imx219 camera driver
|
|
* Copyright (C) 2019-2020 Raspberry Pi (Trading) Ltd
|
|
*/
|
|
#include <linux/unaligned.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <media/v4l2-cci.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-event.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
#include <media/v4l2-mediabus.h>
|
|
|
|
static int dpc_enable = 1;
|
|
module_param(dpc_enable, int, 0644);
|
|
MODULE_PARM_DESC(dpc_enable, "Enable on-sensor DPC");
|
|
|
|
static int trigger_mode;
|
|
module_param(trigger_mode, int, 0644);
|
|
MODULE_PARM_DESC(trigger_mode, "Set vsync trigger mode: 1=source, 2=sink");
|
|
|
|
static int fstrobe_enable;
|
|
module_param(fstrobe_enable, int, 0644);
|
|
MODULE_PARM_DESC(fstrobe_enable, "Enable fstrobe signal");
|
|
|
|
static int fstrobe_cont_trig;
|
|
module_param(fstrobe_cont_trig, int, 0644);
|
|
MODULE_PARM_DESC(fstrobe_cont_trig, "Configure fstrobe to be one-shot (0) or continuous (1)");
|
|
|
|
static int fstrobe_width = 1;
|
|
module_param(fstrobe_width, int, 0644);
|
|
MODULE_PARM_DESC(fstrobe_width, "Set fstrobe pulse width in units of INCK");
|
|
|
|
static int fstrobe_delay;
|
|
module_param(fstrobe_delay, int, 0644);
|
|
MODULE_PARM_DESC(fstrobe_delay, "Set fstrobe delay from end all lines starting to expose and the start of the strobe pulse");
|
|
|
|
#define IMX477_REG_VALUE_08BIT 1
|
|
#define IMX477_REG_VALUE_16BIT 2
|
|
|
|
/* Chip ID */
|
|
#define IMX477_REG_CHIP_ID CCI_REG16(0x0016)
|
|
#define IMX477_CHIP_ID 0x0477
|
|
#define IMX378_CHIP_ID 0x0378
|
|
|
|
#define IMX477_REG_MODE_SELECT CCI_REG8(0x0100)
|
|
#define IMX477_MODE_STANDBY 0x00
|
|
#define IMX477_MODE_STREAMING 0x01
|
|
|
|
#define IMX477_REG_ORIENTATION CCI_REG8(0x101)
|
|
|
|
#define IMX477_REG_CSI_DT_FMT_H CCI_REG8(0x0112)
|
|
#define IMX477_REG_CSI_DT_FMT_L CCI_REG8(0x0113)
|
|
|
|
#define IMX477_XCLK_FREQ 24000000
|
|
|
|
#define IMX477_DEFAULT_LINK_FREQ 450000000
|
|
|
|
/* Pixel rate is fixed at 840MHz for all the modes */
|
|
#define IMX477_PIXEL_RATE 840000000
|
|
|
|
/* V_TIMING internal */
|
|
#define IMX477_REG_FRAME_LENGTH CCI_REG16(0x0340)
|
|
#define IMX477_VBLANK_MIN 48
|
|
#define IMX477_FRAME_LENGTH_MAX 0xffdc
|
|
|
|
/* H_TIMING internal */
|
|
#define IMX477_REG_LINE_LENGTH CCI_REG16(0x0342)
|
|
#define IMX477_LINE_LENGTH_MAX 0xfff0
|
|
|
|
/* Long exposure multiplier */
|
|
#define IMX477_LONG_EXP_SHIFT_MAX 7
|
|
#define IMX477_LONG_EXP_SHIFT_REG CCI_REG8(0x3100)
|
|
|
|
/* Exposure control */
|
|
#define IMX477_REG_EXPOSURE CCI_REG16(0x0202)
|
|
#define IMX477_EXPOSURE_OFFSET 22
|
|
#define IMX477_EXPOSURE_MIN 4
|
|
#define IMX477_EXPOSURE_STEP 1
|
|
#define IMX477_EXPOSURE_DEFAULT 0x640
|
|
#define IMX477_EXPOSURE_MAX (IMX477_FRAME_LENGTH_MAX - \
|
|
IMX477_EXPOSURE_OFFSET)
|
|
|
|
/* Analog gain control */
|
|
#define IMX477_REG_ANALOG_GAIN CCI_REG16(0x0204)
|
|
#define IMX477_ANA_GAIN_MIN 0
|
|
#define IMX477_ANA_GAIN_MAX 978
|
|
#define IMX477_ANA_GAIN_STEP 1
|
|
#define IMX477_ANA_GAIN_DEFAULT 0x0
|
|
|
|
/* Digital gain control */
|
|
#define IMX477_REG_DIGITAL_GAIN CCI_REG16(0x020e)
|
|
#define IMX477_DGTL_GAIN_MIN 0x0100
|
|
#define IMX477_DGTL_GAIN_MAX 0xffff
|
|
#define IMX477_DGTL_GAIN_DEFAULT 0x0100
|
|
#define IMX477_DGTL_GAIN_STEP 1
|
|
|
|
#define IMX477_REG_IOP_PXCK_DIV CCI_REG8(0x0309)
|
|
#define IMX477_REG_IOP_SYSCK_DIV CCI_REG8(0x030b)
|
|
#define IMX477_IOP_SYSCK_DIV 0x02
|
|
#define IMX477_REG_IOP_PREDIV CCI_REG8(0x030d)
|
|
#define IMX477_IOP_PREDIV 0x02
|
|
#define IMX477_REG_IOP_MPY CCI_REG16(0x030e)
|
|
|
|
/* Test Pattern Control */
|
|
#define IMX477_REG_TEST_PATTERN CCI_REG16(0x0600)
|
|
#define IMX477_TEST_PATTERN_DISABLE 0
|
|
#define IMX477_TEST_PATTERN_SOLID_COLOR 1
|
|
#define IMX477_TEST_PATTERN_COLOR_BARS 2
|
|
#define IMX477_TEST_PATTERN_GREY_COLOR 3
|
|
#define IMX477_TEST_PATTERN_PN9 4
|
|
|
|
/* Test pattern colour components */
|
|
#define IMX477_REG_TEST_PATTERN_R CCI_REG16(0x0602)
|
|
#define IMX477_REG_TEST_PATTERN_GR CCI_REG16(0x0604)
|
|
#define IMX477_REG_TEST_PATTERN_B CCI_REG16(0x0606)
|
|
#define IMX477_REG_TEST_PATTERN_GB CCI_REG16(0x0608)
|
|
#define IMX477_TEST_PATTERN_COLOUR_MIN 0
|
|
#define IMX477_TEST_PATTERN_COLOUR_MAX 0x0fff
|
|
#define IMX477_TEST_PATTERN_COLOUR_STEP 1
|
|
#define IMX477_TEST_PATTERN_R_DEFAULT IMX477_TEST_PATTERN_COLOUR_MAX
|
|
#define IMX477_TEST_PATTERN_GR_DEFAULT 0
|
|
#define IMX477_TEST_PATTERN_B_DEFAULT 0
|
|
#define IMX477_TEST_PATTERN_GB_DEFAULT 0
|
|
|
|
#define IMX477_REG_DPHY_CTRL CCI_REG8(0x0808)
|
|
#define IMX477_DPHY_CTRL_AUTO 0
|
|
#define IMX477_DPHY_CTRL_UI 1
|
|
#define IMX477_DPHY_CTRL_REGISTER 2
|
|
#define IMX477_REG_REQ_LINK_BIT_RATE CCI_REG32(0x0820)
|
|
|
|
/* Trigger mode */
|
|
#define IMX477_REG_MC_MODE CCI_REG8(0x3f0b)
|
|
#define IMX477_REG_MS_SEL CCI_REG8(0x3041)
|
|
#define IMX477_REG_XVS_IO_CTRL CCI_REG8(0x3040)
|
|
#define IMX477_REG_EXTOUT_EN CCI_REG8(0x4b81)
|
|
|
|
#define IMX477_REG_ADBIT_MODE CCI_REG8(0x3f0d)
|
|
/* Temperature sensor */
|
|
#define IMX477_REG_TEMP_SEN_CTL CCI_REG8(0x0138)
|
|
|
|
/* Embedded metadata stream structure */
|
|
#define IMX477_EMBEDDED_LINE_WIDTH 16384
|
|
#define IMX477_NUM_EMBEDDED_LINES 1
|
|
|
|
enum pad_types {
|
|
IMAGE_PAD,
|
|
METADATA_PAD,
|
|
NUM_PADS
|
|
};
|
|
|
|
/* IMX477 native and active pixel array size. */
|
|
#define IMX477_NATIVE_WIDTH 4072U
|
|
#define IMX477_NATIVE_HEIGHT 3176U
|
|
#define IMX477_PIXEL_ARRAY_LEFT 8U
|
|
#define IMX477_PIXEL_ARRAY_TOP 16U
|
|
#define IMX477_PIXEL_ARRAY_WIDTH 4056U
|
|
#define IMX477_PIXEL_ARRAY_HEIGHT 3040U
|
|
|
|
struct imx477_reg_list {
|
|
unsigned int num_of_regs;
|
|
const struct cci_reg_sequence *regs;
|
|
};
|
|
|
|
/* Mode : resolution and related config&values */
|
|
struct imx477_mode {
|
|
/* Frame width */
|
|
unsigned int width;
|
|
|
|
/* Frame height */
|
|
unsigned int height;
|
|
|
|
/* Analog crop rectangle. */
|
|
struct v4l2_rect crop;
|
|
|
|
/* Default frame_length value to use in this mode */
|
|
unsigned int frm_length_default;
|
|
|
|
/* Default register values */
|
|
struct imx477_reg_list reg_list;
|
|
};
|
|
|
|
static const struct cci_reg_sequence mode_common_regs[] = {
|
|
{CCI_REG8(0x0136), 0x18},
|
|
{CCI_REG8(0x0137), 0x00},
|
|
{CCI_REG8(0x0138), 0x01},
|
|
{CCI_REG8(0xe000), 0x00},
|
|
{CCI_REG8(0xe07a), 0x01},
|
|
{IMX477_REG_DPHY_CTRL, IMX477_DPHY_CTRL_REGISTER},
|
|
{CCI_REG8(0x4ae9), 0x18},
|
|
{CCI_REG8(0x4aea), 0x08},
|
|
{CCI_REG8(0xf61c), 0x04},
|
|
{CCI_REG8(0xf61e), 0x04},
|
|
{CCI_REG8(0x4ae9), 0x21},
|
|
{CCI_REG8(0x4aea), 0x80},
|
|
{CCI_REG8(0x38a8), 0x1f},
|
|
{CCI_REG8(0x38a9), 0xff},
|
|
{CCI_REG8(0x38aa), 0x1f},
|
|
{CCI_REG8(0x38ab), 0xff},
|
|
{CCI_REG8(0x55d4), 0x00},
|
|
{CCI_REG8(0x55d5), 0x00},
|
|
{CCI_REG8(0x55d6), 0x07},
|
|
{CCI_REG8(0x55d7), 0xff},
|
|
{CCI_REG8(0x55e8), 0x07},
|
|
{CCI_REG8(0x55e9), 0xff},
|
|
{CCI_REG8(0x55ea), 0x00},
|
|
{CCI_REG8(0x55eb), 0x00},
|
|
{CCI_REG8(0x574c), 0x07},
|
|
{CCI_REG8(0x574d), 0xff},
|
|
{CCI_REG8(0x574e), 0x00},
|
|
{CCI_REG8(0x574f), 0x00},
|
|
{CCI_REG8(0x5754), 0x00},
|
|
{CCI_REG8(0x5755), 0x00},
|
|
{CCI_REG8(0x5756), 0x07},
|
|
{CCI_REG8(0x5757), 0xff},
|
|
{CCI_REG8(0x5973), 0x04},
|
|
{CCI_REG8(0x5974), 0x01},
|
|
{CCI_REG8(0x5d13), 0xc3},
|
|
{CCI_REG8(0x5d14), 0x58},
|
|
{CCI_REG8(0x5d15), 0xa3},
|
|
{CCI_REG8(0x5d16), 0x1d},
|
|
{CCI_REG8(0x5d17), 0x65},
|
|
{CCI_REG8(0x5d18), 0x8c},
|
|
{CCI_REG8(0x5d1a), 0x06},
|
|
{CCI_REG8(0x5d1b), 0xa9},
|
|
{CCI_REG8(0x5d1c), 0x45},
|
|
{CCI_REG8(0x5d1d), 0x3a},
|
|
{CCI_REG8(0x5d1e), 0xab},
|
|
{CCI_REG8(0x5d1f), 0x15},
|
|
{CCI_REG8(0x5d21), 0x0e},
|
|
{CCI_REG8(0x5d22), 0x52},
|
|
{CCI_REG8(0x5d23), 0xaa},
|
|
{CCI_REG8(0x5d24), 0x7d},
|
|
{CCI_REG8(0x5d25), 0x57},
|
|
{CCI_REG8(0x5d26), 0xa8},
|
|
{CCI_REG8(0x5d37), 0x5a},
|
|
{CCI_REG8(0x5d38), 0x5a},
|
|
{CCI_REG8(0x5d77), 0x7f},
|
|
{CCI_REG8(0x7b75), 0x0e},
|
|
{CCI_REG8(0x7b76), 0x0b},
|
|
{CCI_REG8(0x7b77), 0x08},
|
|
{CCI_REG8(0x7b78), 0x0a},
|
|
{CCI_REG8(0x7b79), 0x47},
|
|
{CCI_REG8(0x7b7c), 0x00},
|
|
{CCI_REG8(0x7b7d), 0x00},
|
|
{CCI_REG8(0x8d1f), 0x00},
|
|
{CCI_REG8(0x8d27), 0x00},
|
|
{CCI_REG8(0x9004), 0x03},
|
|
{CCI_REG8(0x9200), 0x50},
|
|
{CCI_REG8(0x9201), 0x6c},
|
|
{CCI_REG8(0x9202), 0x71},
|
|
{CCI_REG8(0x9203), 0x00},
|
|
{CCI_REG8(0x9204), 0x71},
|
|
{CCI_REG8(0x9205), 0x01},
|
|
{CCI_REG8(0x9371), 0x6a},
|
|
{CCI_REG8(0x9373), 0x6a},
|
|
{CCI_REG8(0x9375), 0x64},
|
|
{CCI_REG8(0x991a), 0x00},
|
|
{CCI_REG8(0x996b), 0x8c},
|
|
{CCI_REG8(0x996c), 0x64},
|
|
{CCI_REG8(0x996d), 0x50},
|
|
{CCI_REG8(0x9a4c), 0x0d},
|
|
{CCI_REG8(0x9a4d), 0x0d},
|
|
{CCI_REG8(0xa001), 0x0a},
|
|
{CCI_REG8(0xa003), 0x0a},
|
|
{CCI_REG8(0xa005), 0x0a},
|
|
{CCI_REG8(0xa006), 0x01},
|
|
{CCI_REG8(0xa007), 0xc0},
|
|
{CCI_REG8(0xa009), 0xc0},
|
|
{CCI_REG8(0x3d8a), 0x01},
|
|
{CCI_REG8(0x4421), 0x04},
|
|
{CCI_REG8(0x7b3b), 0x01},
|
|
{CCI_REG8(0x7b4c), 0x00},
|
|
{CCI_REG8(0x9905), 0x00},
|
|
{CCI_REG8(0x9907), 0x00},
|
|
{CCI_REG8(0x9909), 0x00},
|
|
{CCI_REG8(0x990b), 0x00},
|
|
{CCI_REG8(0x9944), 0x3c},
|
|
{CCI_REG8(0x9947), 0x3c},
|
|
{CCI_REG8(0x994a), 0x8c},
|
|
{CCI_REG8(0x994b), 0x50},
|
|
{CCI_REG8(0x994c), 0x1b},
|
|
{CCI_REG8(0x994d), 0x8c},
|
|
{CCI_REG8(0x994e), 0x50},
|
|
{CCI_REG8(0x994f), 0x1b},
|
|
{CCI_REG8(0x9950), 0x8c},
|
|
{CCI_REG8(0x9951), 0x1b},
|
|
{CCI_REG8(0x9952), 0x0a},
|
|
{CCI_REG8(0x9953), 0x8c},
|
|
{CCI_REG8(0x9954), 0x1b},
|
|
{CCI_REG8(0x9955), 0x0a},
|
|
{CCI_REG8(0x9a13), 0x04},
|
|
{CCI_REG8(0x9a14), 0x04},
|
|
{CCI_REG8(0x9a19), 0x00},
|
|
{CCI_REG8(0x9a1c), 0x04},
|
|
{CCI_REG8(0x9a1d), 0x04},
|
|
{CCI_REG8(0x9a26), 0x05},
|
|
{CCI_REG8(0x9a27), 0x05},
|
|
{CCI_REG8(0x9a2c), 0x01},
|
|
{CCI_REG8(0x9a2d), 0x03},
|
|
{CCI_REG8(0x9a2f), 0x05},
|
|
{CCI_REG8(0x9a30), 0x05},
|
|
{CCI_REG8(0x9a41), 0x00},
|
|
{CCI_REG8(0x9a46), 0x00},
|
|
{CCI_REG8(0x9a47), 0x00},
|
|
{CCI_REG8(0x9c17), 0x35},
|
|
{CCI_REG8(0x9c1d), 0x31},
|
|
{CCI_REG8(0x9c29), 0x50},
|
|
{CCI_REG8(0x9c3b), 0x2f},
|
|
{CCI_REG8(0x9c41), 0x6b},
|
|
{CCI_REG8(0x9c47), 0x2d},
|
|
{CCI_REG8(0x9c4d), 0x40},
|
|
{CCI_REG8(0x9c6b), 0x00},
|
|
{CCI_REG8(0x9c71), 0xc8},
|
|
{CCI_REG8(0x9c73), 0x32},
|
|
{CCI_REG8(0x9c75), 0x04},
|
|
{CCI_REG8(0x9c7d), 0x2d},
|
|
{CCI_REG8(0x9c83), 0x40},
|
|
{CCI_REG8(0x9c94), 0x3f},
|
|
{CCI_REG8(0x9c95), 0x3f},
|
|
{CCI_REG8(0x9c96), 0x3f},
|
|
{CCI_REG8(0x9c97), 0x00},
|
|
{CCI_REG8(0x9c98), 0x00},
|
|
{CCI_REG8(0x9c99), 0x00},
|
|
{CCI_REG8(0x9c9a), 0x3f},
|
|
{CCI_REG8(0x9c9b), 0x3f},
|
|
{CCI_REG8(0x9c9c), 0x3f},
|
|
{CCI_REG8(0x9ca0), 0x0f},
|
|
{CCI_REG8(0x9ca1), 0x0f},
|
|
{CCI_REG8(0x9ca2), 0x0f},
|
|
{CCI_REG8(0x9ca3), 0x00},
|
|
{CCI_REG8(0x9ca4), 0x00},
|
|
{CCI_REG8(0x9ca5), 0x00},
|
|
{CCI_REG8(0x9ca6), 0x1e},
|
|
{CCI_REG8(0x9ca7), 0x1e},
|
|
{CCI_REG8(0x9ca8), 0x1e},
|
|
{CCI_REG8(0x9ca9), 0x00},
|
|
{CCI_REG8(0x9caa), 0x00},
|
|
{CCI_REG8(0x9cab), 0x00},
|
|
{CCI_REG8(0x9cac), 0x09},
|
|
{CCI_REG8(0x9cad), 0x09},
|
|
{CCI_REG8(0x9cae), 0x09},
|
|
{CCI_REG8(0x9cbd), 0x50},
|
|
{CCI_REG8(0x9cbf), 0x50},
|
|
{CCI_REG8(0x9cc1), 0x50},
|
|
{CCI_REG8(0x9cc3), 0x40},
|
|
{CCI_REG8(0x9cc5), 0x40},
|
|
{CCI_REG8(0x9cc7), 0x40},
|
|
{CCI_REG8(0x9cc9), 0x0a},
|
|
{CCI_REG8(0x9ccb), 0x0a},
|
|
{CCI_REG8(0x9ccd), 0x0a},
|
|
{CCI_REG8(0x9d17), 0x35},
|
|
{CCI_REG8(0x9d1d), 0x31},
|
|
{CCI_REG8(0x9d29), 0x50},
|
|
{CCI_REG8(0x9d3b), 0x2f},
|
|
{CCI_REG8(0x9d41), 0x6b},
|
|
{CCI_REG8(0x9d47), 0x42},
|
|
{CCI_REG8(0x9d4d), 0x5a},
|
|
{CCI_REG8(0x9d6b), 0x00},
|
|
{CCI_REG8(0x9d71), 0xc8},
|
|
{CCI_REG8(0x9d73), 0x32},
|
|
{CCI_REG8(0x9d75), 0x04},
|
|
{CCI_REG8(0x9d7d), 0x42},
|
|
{CCI_REG8(0x9d83), 0x5a},
|
|
{CCI_REG8(0x9d94), 0x3f},
|
|
{CCI_REG8(0x9d95), 0x3f},
|
|
{CCI_REG8(0x9d96), 0x3f},
|
|
{CCI_REG8(0x9d97), 0x00},
|
|
{CCI_REG8(0x9d98), 0x00},
|
|
{CCI_REG8(0x9d99), 0x00},
|
|
{CCI_REG8(0x9d9a), 0x3f},
|
|
{CCI_REG8(0x9d9b), 0x3f},
|
|
{CCI_REG8(0x9d9c), 0x3f},
|
|
{CCI_REG8(0x9d9d), 0x1f},
|
|
{CCI_REG8(0x9d9e), 0x1f},
|
|
{CCI_REG8(0x9d9f), 0x1f},
|
|
{CCI_REG8(0x9da0), 0x0f},
|
|
{CCI_REG8(0x9da1), 0x0f},
|
|
{CCI_REG8(0x9da2), 0x0f},
|
|
{CCI_REG8(0x9da3), 0x00},
|
|
{CCI_REG8(0x9da4), 0x00},
|
|
{CCI_REG8(0x9da5), 0x00},
|
|
{CCI_REG8(0x9da6), 0x1e},
|
|
{CCI_REG8(0x9da7), 0x1e},
|
|
{CCI_REG8(0x9da8), 0x1e},
|
|
{CCI_REG8(0x9da9), 0x00},
|
|
{CCI_REG8(0x9daa), 0x00},
|
|
{CCI_REG8(0x9dab), 0x00},
|
|
{CCI_REG8(0x9dac), 0x09},
|
|
{CCI_REG8(0x9dad), 0x09},
|
|
{CCI_REG8(0x9dae), 0x09},
|
|
{CCI_REG8(0x9dc9), 0x0a},
|
|
{CCI_REG8(0x9dcb), 0x0a},
|
|
{CCI_REG8(0x9dcd), 0x0a},
|
|
{CCI_REG8(0x9e17), 0x35},
|
|
{CCI_REG8(0x9e1d), 0x31},
|
|
{CCI_REG8(0x9e29), 0x50},
|
|
{CCI_REG8(0x9e3b), 0x2f},
|
|
{CCI_REG8(0x9e41), 0x6b},
|
|
{CCI_REG8(0x9e47), 0x2d},
|
|
{CCI_REG8(0x9e4d), 0x40},
|
|
{CCI_REG8(0x9e6b), 0x00},
|
|
{CCI_REG8(0x9e71), 0xc8},
|
|
{CCI_REG8(0x9e73), 0x32},
|
|
{CCI_REG8(0x9e75), 0x04},
|
|
{CCI_REG8(0x9e94), 0x0f},
|
|
{CCI_REG8(0x9e95), 0x0f},
|
|
{CCI_REG8(0x9e96), 0x0f},
|
|
{CCI_REG8(0x9e97), 0x00},
|
|
{CCI_REG8(0x9e98), 0x00},
|
|
{CCI_REG8(0x9e99), 0x00},
|
|
{CCI_REG8(0x9ea0), 0x0f},
|
|
{CCI_REG8(0x9ea1), 0x0f},
|
|
{CCI_REG8(0x9ea2), 0x0f},
|
|
{CCI_REG8(0x9ea3), 0x00},
|
|
{CCI_REG8(0x9ea4), 0x00},
|
|
{CCI_REG8(0x9ea5), 0x00},
|
|
{CCI_REG8(0x9ea6), 0x3f},
|
|
{CCI_REG8(0x9ea7), 0x3f},
|
|
{CCI_REG8(0x9ea8), 0x3f},
|
|
{CCI_REG8(0x9ea9), 0x00},
|
|
{CCI_REG8(0x9eaa), 0x00},
|
|
{CCI_REG8(0x9eab), 0x00},
|
|
{CCI_REG8(0x9eac), 0x09},
|
|
{CCI_REG8(0x9ead), 0x09},
|
|
{CCI_REG8(0x9eae), 0x09},
|
|
{CCI_REG8(0x9ec9), 0x0a},
|
|
{CCI_REG8(0x9ecb), 0x0a},
|
|
{CCI_REG8(0x9ecd), 0x0a},
|
|
{CCI_REG8(0x9f17), 0x35},
|
|
{CCI_REG8(0x9f1d), 0x31},
|
|
{CCI_REG8(0x9f29), 0x50},
|
|
{CCI_REG8(0x9f3b), 0x2f},
|
|
{CCI_REG8(0x9f41), 0x6b},
|
|
{CCI_REG8(0x9f47), 0x42},
|
|
{CCI_REG8(0x9f4d), 0x5a},
|
|
{CCI_REG8(0x9f6b), 0x00},
|
|
{CCI_REG8(0x9f71), 0xc8},
|
|
{CCI_REG8(0x9f73), 0x32},
|
|
{CCI_REG8(0x9f75), 0x04},
|
|
{CCI_REG8(0x9f94), 0x0f},
|
|
{CCI_REG8(0x9f95), 0x0f},
|
|
{CCI_REG8(0x9f96), 0x0f},
|
|
{CCI_REG8(0x9f97), 0x00},
|
|
{CCI_REG8(0x9f98), 0x00},
|
|
{CCI_REG8(0x9f99), 0x00},
|
|
{CCI_REG8(0x9f9a), 0x2f},
|
|
{CCI_REG8(0x9f9b), 0x2f},
|
|
{CCI_REG8(0x9f9c), 0x2f},
|
|
{CCI_REG8(0x9f9d), 0x00},
|
|
{CCI_REG8(0x9f9e), 0x00},
|
|
{CCI_REG8(0x9f9f), 0x00},
|
|
{CCI_REG8(0x9fa0), 0x0f},
|
|
{CCI_REG8(0x9fa1), 0x0f},
|
|
{CCI_REG8(0x9fa2), 0x0f},
|
|
{CCI_REG8(0x9fa3), 0x00},
|
|
{CCI_REG8(0x9fa4), 0x00},
|
|
{CCI_REG8(0x9fa5), 0x00},
|
|
{CCI_REG8(0x9fa6), 0x1e},
|
|
{CCI_REG8(0x9fa7), 0x1e},
|
|
{CCI_REG8(0x9fa8), 0x1e},
|
|
{CCI_REG8(0x9fa9), 0x00},
|
|
{CCI_REG8(0x9faa), 0x00},
|
|
{CCI_REG8(0x9fab), 0x00},
|
|
{CCI_REG8(0x9fac), 0x09},
|
|
{CCI_REG8(0x9fad), 0x09},
|
|
{CCI_REG8(0x9fae), 0x09},
|
|
{CCI_REG8(0x9fc9), 0x0a},
|
|
{CCI_REG8(0x9fcb), 0x0a},
|
|
{CCI_REG8(0x9fcd), 0x0a},
|
|
{CCI_REG8(0xa14b), 0xff},
|
|
{CCI_REG8(0xa151), 0x0c},
|
|
{CCI_REG8(0xa153), 0x50},
|
|
{CCI_REG8(0xa155), 0x02},
|
|
{CCI_REG8(0xa157), 0x00},
|
|
{CCI_REG8(0xa1ad), 0xff},
|
|
{CCI_REG8(0xa1b3), 0x0c},
|
|
{CCI_REG8(0xa1b5), 0x50},
|
|
{CCI_REG8(0xa1b9), 0x00},
|
|
{CCI_REG8(0xa24b), 0xff},
|
|
{CCI_REG8(0xa257), 0x00},
|
|
{CCI_REG8(0xa2ad), 0xff},
|
|
{CCI_REG8(0xa2b9), 0x00},
|
|
{CCI_REG8(0xb21f), 0x04},
|
|
{CCI_REG8(0xb35c), 0x00},
|
|
{CCI_REG8(0xb35e), 0x08},
|
|
{CCI_REG8(0x0114), 0x01},
|
|
{CCI_REG8(0x0350), 0x00},
|
|
{CCI_REG8(0xbcf1), 0x02},
|
|
{CCI_REG8(0x3ff9), 0x01},
|
|
{CCI_REG8(0x0220), 0x00},
|
|
{CCI_REG8(0x0221), 0x11},
|
|
{CCI_REG8(0x0381), 0x01},
|
|
{CCI_REG8(0x0383), 0x01},
|
|
{CCI_REG8(0x0385), 0x01},
|
|
{CCI_REG8(0x0387), 0x01},
|
|
{CCI_REG8(0x0902), 0x02},
|
|
{CCI_REG8(0x3140), 0x02},
|
|
{CCI_REG8(0x3c00), 0x00},
|
|
{CCI_REG8(0x9e9a), 0x2f},
|
|
{CCI_REG8(0x9e9b), 0x2f},
|
|
{CCI_REG8(0x9e9c), 0x2f},
|
|
{CCI_REG8(0x9e9d), 0x00},
|
|
{CCI_REG8(0x9e9e), 0x00},
|
|
{CCI_REG8(0x9e9f), 0x00},
|
|
{CCI_REG8(0x0301), 0x05},
|
|
{CCI_REG8(0x0303), 0x02},
|
|
{IMX477_REG_IOP_SYSCK_DIV, IMX477_IOP_SYSCK_DIV},
|
|
{IMX477_REG_IOP_PREDIV, IMX477_IOP_PREDIV},
|
|
{CCI_REG8(0x0310), 0x01},
|
|
{CCI_REG8(0x080a), 0x00},
|
|
{CCI_REG8(0x080b), 0x7f},
|
|
{CCI_REG8(0x080c), 0x00},
|
|
{CCI_REG8(0x080d), 0x4f},
|
|
{CCI_REG8(0x080e), 0x00},
|
|
{CCI_REG8(0x080f), 0x77},
|
|
{CCI_REG8(0x0810), 0x00},
|
|
{CCI_REG8(0x0811), 0x5f},
|
|
{CCI_REG8(0x0812), 0x00},
|
|
{CCI_REG8(0x0813), 0x57},
|
|
{CCI_REG8(0x0814), 0x00},
|
|
{CCI_REG8(0x0815), 0x4f},
|
|
{CCI_REG8(0x0816), 0x01},
|
|
{CCI_REG8(0x0817), 0x27},
|
|
{CCI_REG8(0x0818), 0x00},
|
|
{CCI_REG8(0x0819), 0x3f},
|
|
{CCI_REG8(0x3e20), 0x01},
|
|
{CCI_REG8(0x3e37), 0x00},
|
|
{CCI_REG8(0x3f50), 0x00},
|
|
};
|
|
|
|
/* 12 mpix 10fps */
|
|
static const struct cci_reg_sequence mode_4056x3040_regs[] = {
|
|
{CCI_REG8(0x0344), 0x00},
|
|
{CCI_REG8(0x0345), 0x00},
|
|
{CCI_REG8(0x0346), 0x00},
|
|
{CCI_REG8(0x0347), 0x00},
|
|
{CCI_REG8(0x0348), 0x0f},
|
|
{CCI_REG8(0x0349), 0xd7},
|
|
{CCI_REG8(0x034a), 0x0b},
|
|
{CCI_REG8(0x034b), 0xdf},
|
|
{CCI_REG8(0x00e3), 0x00},
|
|
{CCI_REG8(0x00e4), 0x00},
|
|
{CCI_REG8(0x00fc), 0x0a},
|
|
{CCI_REG8(0x00fd), 0x0a},
|
|
{CCI_REG8(0x00fe), 0x0a},
|
|
{CCI_REG8(0x00ff), 0x0a},
|
|
{CCI_REG8(0x0900), 0x00},
|
|
{CCI_REG8(0x0901), 0x11},
|
|
{CCI_REG8(0x3c01), 0x03},
|
|
{CCI_REG8(0x3c02), 0xa2},
|
|
{CCI_REG8(0x5748), 0x07},
|
|
{CCI_REG8(0x5749), 0xff},
|
|
{CCI_REG8(0x574a), 0x00},
|
|
{CCI_REG8(0x574b), 0x00},
|
|
{CCI_REG8(0x7b75), 0x0a},
|
|
{CCI_REG8(0x7b76), 0x0c},
|
|
{CCI_REG8(0x7b77), 0x07},
|
|
{CCI_REG8(0x7b78), 0x06},
|
|
{CCI_REG8(0x7b79), 0x3c},
|
|
{CCI_REG8(0x7b53), 0x01},
|
|
{CCI_REG8(0x9369), 0x5a},
|
|
{CCI_REG8(0x936b), 0x55},
|
|
{CCI_REG8(0x936d), 0x28},
|
|
{CCI_REG8(0x9304), 0x00},
|
|
{CCI_REG8(0x9305), 0x00},
|
|
{CCI_REG8(0xa2a9), 0x60},
|
|
{CCI_REG8(0xa2b7), 0x00},
|
|
{CCI_REG8(0x0401), 0x00},
|
|
{CCI_REG8(0x0404), 0x00},
|
|
{CCI_REG8(0x0405), 0x10},
|
|
{CCI_REG8(0x0408), 0x00},
|
|
{CCI_REG8(0x0409), 0x00},
|
|
{CCI_REG8(0x040a), 0x00},
|
|
{CCI_REG8(0x040b), 0x00},
|
|
{CCI_REG8(0x040c), 0x0f},
|
|
{CCI_REG8(0x040d), 0xd8},
|
|
{CCI_REG8(0x040e), 0x0b},
|
|
{CCI_REG8(0x040f), 0xe0},
|
|
{CCI_REG8(0x034c), 0x0f},
|
|
{CCI_REG8(0x034d), 0xd8},
|
|
{CCI_REG8(0x034e), 0x0b},
|
|
{CCI_REG8(0x034f), 0xe0},
|
|
{CCI_REG8(0x0305), 0x04},
|
|
{CCI_REG8(0x0306), 0x01},
|
|
{CCI_REG8(0x0307), 0x5e},
|
|
{CCI_REG8(0xe04c), 0x00},
|
|
{CCI_REG8(0xe04d), 0x7f},
|
|
{CCI_REG8(0xe04e), 0x00},
|
|
{CCI_REG8(0xe04f), 0x1f},
|
|
{CCI_REG8(0x3f56), 0x02},
|
|
{CCI_REG8(0x3f57), 0xae},
|
|
};
|
|
|
|
/* 12 mpix cropped to 16:9 10fps */
|
|
static const struct cci_reg_sequence mode_4056x2160_regs[] = {
|
|
{CCI_REG8(0x0344), 0x00},
|
|
{CCI_REG8(0x0345), 0x00},
|
|
{CCI_REG8(0x0346), 0x01},
|
|
{CCI_REG8(0x0347), 0xb8},
|
|
{CCI_REG8(0x0348), 0x0f},
|
|
{CCI_REG8(0x0349), 0xd7},
|
|
{CCI_REG8(0x034a), 0x0a},
|
|
{CCI_REG8(0x034b), 0x27},
|
|
{CCI_REG8(0x00e3), 0x00},
|
|
{CCI_REG8(0x00e4), 0x00},
|
|
{CCI_REG8(0x00fc), 0x0a},
|
|
{CCI_REG8(0x00fd), 0x0a},
|
|
{CCI_REG8(0x00fe), 0x0a},
|
|
{CCI_REG8(0x00ff), 0x0a},
|
|
{CCI_REG8(0x0900), 0x00},
|
|
{CCI_REG8(0x0901), 0x11},
|
|
{CCI_REG8(0x3c01), 0x03},
|
|
{CCI_REG8(0x3c02), 0xa2},
|
|
{CCI_REG8(0x5748), 0x07},
|
|
{CCI_REG8(0x5749), 0xff},
|
|
{CCI_REG8(0x574a), 0x00},
|
|
{CCI_REG8(0x574b), 0x00},
|
|
{CCI_REG8(0x7b75), 0x0a},
|
|
{CCI_REG8(0x7b76), 0x0c},
|
|
{CCI_REG8(0x7b77), 0x07},
|
|
{CCI_REG8(0x7b78), 0x06},
|
|
{CCI_REG8(0x7b79), 0x3c},
|
|
{CCI_REG8(0x7b53), 0x01},
|
|
{CCI_REG8(0x9369), 0x5a},
|
|
{CCI_REG8(0x936b), 0x55},
|
|
{CCI_REG8(0x936d), 0x28},
|
|
{CCI_REG8(0x9304), 0x00},
|
|
{CCI_REG8(0x9305), 0x00},
|
|
{CCI_REG8(0xa2a9), 0x60},
|
|
{CCI_REG8(0xa2b7), 0x00},
|
|
{CCI_REG8(0x0401), 0x00},
|
|
{CCI_REG8(0x0404), 0x00},
|
|
{CCI_REG8(0x0405), 0x10},
|
|
{CCI_REG8(0x0408), 0x00},
|
|
{CCI_REG8(0x0409), 0x00},
|
|
{CCI_REG8(0x040a), 0x00},
|
|
{CCI_REG8(0x040b), 0x00},
|
|
{CCI_REG8(0x040c), 0x0f},
|
|
{CCI_REG8(0x040d), 0xd8},
|
|
{CCI_REG8(0x040e), 0x08},
|
|
{CCI_REG8(0x040f), 0x70},
|
|
{CCI_REG8(0x034c), 0x0f},
|
|
{CCI_REG8(0x034d), 0xd8},
|
|
{CCI_REG8(0x034e), 0x08},
|
|
{CCI_REG8(0x034f), 0x70},
|
|
{CCI_REG8(0x0305), 0x04},
|
|
{CCI_REG8(0x0306), 0x01},
|
|
{CCI_REG8(0x0307), 0x5e},
|
|
{CCI_REG8(0xe04c), 0x00},
|
|
{CCI_REG8(0xe04d), 0x7f},
|
|
{CCI_REG8(0xe04e), 0x00},
|
|
{CCI_REG8(0xe04f), 0x1f},
|
|
{CCI_REG8(0x3f56), 0x02},
|
|
{CCI_REG8(0x3f57), 0xae},
|
|
};
|
|
|
|
/* 2x2 binned. 40fps */
|
|
static const struct cci_reg_sequence mode_2028x1520_regs[] = {
|
|
{CCI_REG8(0x0344), 0x00},
|
|
{CCI_REG8(0x0345), 0x00},
|
|
{CCI_REG8(0x0346), 0x00},
|
|
{CCI_REG8(0x0347), 0x00},
|
|
{CCI_REG8(0x0348), 0x0f},
|
|
{CCI_REG8(0x0349), 0xd7},
|
|
{CCI_REG8(0x034a), 0x0b},
|
|
{CCI_REG8(0x034b), 0xdf},
|
|
{CCI_REG8(0x0900), 0x01},
|
|
{CCI_REG8(0x0901), 0x22},
|
|
{CCI_REG8(0x3c01), 0x03},
|
|
{CCI_REG8(0x3c02), 0xa2},
|
|
{CCI_REG8(0x5748), 0x07},
|
|
{CCI_REG8(0x5749), 0xff},
|
|
{CCI_REG8(0x574a), 0x00},
|
|
{CCI_REG8(0x574b), 0x00},
|
|
{CCI_REG8(0x7b53), 0x01},
|
|
{CCI_REG8(0x9369), 0x73},
|
|
{CCI_REG8(0x936b), 0x64},
|
|
{CCI_REG8(0x936d), 0x5f},
|
|
{CCI_REG8(0x9304), 0x00},
|
|
{CCI_REG8(0x9305), 0x00},
|
|
{CCI_REG8(0xa2a9), 0x60},
|
|
{CCI_REG8(0xa2b7), 0x00},
|
|
{CCI_REG8(0x0401), 0x00},
|
|
{CCI_REG8(0x0404), 0x00},
|
|
{CCI_REG8(0x0405), 0x20},
|
|
{CCI_REG8(0x0408), 0x00},
|
|
{CCI_REG8(0x0409), 0x00},
|
|
{CCI_REG8(0x040a), 0x00},
|
|
{CCI_REG8(0x040b), 0x00},
|
|
{CCI_REG8(0x040c), 0x0f},
|
|
{CCI_REG8(0x040d), 0xd8},
|
|
{CCI_REG8(0x040e), 0x0b},
|
|
{CCI_REG8(0x040f), 0xe0},
|
|
{CCI_REG8(0x034c), 0x07},
|
|
{CCI_REG8(0x034d), 0xec},
|
|
{CCI_REG8(0x034e), 0x05},
|
|
{CCI_REG8(0x034f), 0xf0},
|
|
{CCI_REG8(0x0305), 0x04},
|
|
{CCI_REG8(0x0306), 0x01},
|
|
{CCI_REG8(0x0307), 0x5e},
|
|
{CCI_REG8(0xe04c), 0x00},
|
|
{CCI_REG8(0xe04d), 0x7f},
|
|
{CCI_REG8(0xe04e), 0x00},
|
|
{CCI_REG8(0xe04f), 0x1f},
|
|
{CCI_REG8(0x3f56), 0x01},
|
|
{CCI_REG8(0x3f57), 0x6c},
|
|
};
|
|
|
|
/* 1080p cropped mode */
|
|
static const struct cci_reg_sequence mode_2028x1080_regs[] = {
|
|
{CCI_REG8(0x0344), 0x00},
|
|
{CCI_REG8(0x0345), 0x00},
|
|
{CCI_REG8(0x0346), 0x01},
|
|
{CCI_REG8(0x0347), 0xb8},
|
|
{CCI_REG8(0x0348), 0x0f},
|
|
{CCI_REG8(0x0349), 0xd7},
|
|
{CCI_REG8(0x034a), 0x0a},
|
|
{CCI_REG8(0x034b), 0x27},
|
|
{CCI_REG8(0x0900), 0x01},
|
|
{CCI_REG8(0x0901), 0x22},
|
|
{CCI_REG8(0x3c01), 0x03},
|
|
{CCI_REG8(0x3c02), 0xa2},
|
|
{CCI_REG8(0x5748), 0x07},
|
|
{CCI_REG8(0x5749), 0xff},
|
|
{CCI_REG8(0x574a), 0x00},
|
|
{CCI_REG8(0x574b), 0x00},
|
|
{CCI_REG8(0x7b53), 0x01},
|
|
{CCI_REG8(0x9369), 0x73},
|
|
{CCI_REG8(0x936b), 0x64},
|
|
{CCI_REG8(0x936d), 0x5f},
|
|
{CCI_REG8(0x9304), 0x00},
|
|
{CCI_REG8(0x9305), 0x00},
|
|
{CCI_REG8(0xa2a9), 0x60},
|
|
{CCI_REG8(0xa2b7), 0x00},
|
|
{CCI_REG8(0x0401), 0x00},
|
|
{CCI_REG8(0x0404), 0x00},
|
|
{CCI_REG8(0x0405), 0x20},
|
|
{CCI_REG8(0x0408), 0x00},
|
|
{CCI_REG8(0x0409), 0x00},
|
|
{CCI_REG8(0x040a), 0x00},
|
|
{CCI_REG8(0x040b), 0x00},
|
|
{CCI_REG8(0x040c), 0x0f},
|
|
{CCI_REG8(0x040d), 0xd8},
|
|
{CCI_REG8(0x040e), 0x04},
|
|
{CCI_REG8(0x040f), 0x38},
|
|
{CCI_REG8(0x034c), 0x07},
|
|
{CCI_REG8(0x034d), 0xec},
|
|
{CCI_REG8(0x034e), 0x04},
|
|
{CCI_REG8(0x034f), 0x38},
|
|
{CCI_REG8(0x0305), 0x04},
|
|
{CCI_REG8(0x0306), 0x01},
|
|
{CCI_REG8(0x0307), 0x5e},
|
|
{CCI_REG8(0xe04c), 0x00},
|
|
{CCI_REG8(0xe04d), 0x7f},
|
|
{CCI_REG8(0xe04e), 0x00},
|
|
{CCI_REG8(0xe04f), 0x1f},
|
|
{CCI_REG8(0x3f56), 0x01},
|
|
{CCI_REG8(0x3f57), 0x6c},
|
|
};
|
|
|
|
/* 4x4 binned. 120fps */
|
|
static const struct cci_reg_sequence mode_1332x990_regs[] = {
|
|
{CCI_REG8(0x420b), 0x01},
|
|
{CCI_REG8(0x990c), 0x00},
|
|
{CCI_REG8(0x990d), 0x08},
|
|
{CCI_REG8(0x9956), 0x8c},
|
|
{CCI_REG8(0x9957), 0x64},
|
|
{CCI_REG8(0x9958), 0x50},
|
|
{CCI_REG8(0x9a48), 0x06},
|
|
{CCI_REG8(0x9a49), 0x06},
|
|
{CCI_REG8(0x9a4a), 0x06},
|
|
{CCI_REG8(0x9a4b), 0x06},
|
|
{CCI_REG8(0x9a4c), 0x06},
|
|
{CCI_REG8(0x9a4d), 0x06},
|
|
{CCI_REG8(0x0114), 0x01},
|
|
{CCI_REG8(0x0340), 0x04},
|
|
{CCI_REG8(0x0341), 0x1a},
|
|
{CCI_REG8(0x0344), 0x00},
|
|
{CCI_REG8(0x0345), 0x00},
|
|
{CCI_REG8(0x0346), 0x02},
|
|
{CCI_REG8(0x0347), 0x10},
|
|
{CCI_REG8(0x0348), 0x0f},
|
|
{CCI_REG8(0x0349), 0xd7},
|
|
{CCI_REG8(0x034a), 0x09},
|
|
{CCI_REG8(0x034b), 0xcf},
|
|
{CCI_REG8(0x00e3), 0x00},
|
|
{CCI_REG8(0x00e4), 0x00},
|
|
{CCI_REG8(0x00fc), 0x0a},
|
|
{CCI_REG8(0x00fd), 0x0a},
|
|
{CCI_REG8(0x00fe), 0x0a},
|
|
{CCI_REG8(0x00ff), 0x0a},
|
|
{CCI_REG8(0xe013), 0x00},
|
|
{CCI_REG8(0x0220), 0x00},
|
|
{CCI_REG8(0x0221), 0x11},
|
|
{CCI_REG8(0x0381), 0x01},
|
|
{CCI_REG8(0x0383), 0x01},
|
|
{CCI_REG8(0x0385), 0x01},
|
|
{CCI_REG8(0x0387), 0x01},
|
|
{CCI_REG8(0x0900), 0x01},
|
|
{CCI_REG8(0x0901), 0x22},
|
|
{CCI_REG8(0x0902), 0x02},
|
|
{CCI_REG8(0x3140), 0x02},
|
|
{CCI_REG8(0x3c00), 0x00},
|
|
{CCI_REG8(0x3c01), 0x01},
|
|
{CCI_REG8(0x3c02), 0x9c},
|
|
{CCI_REG8(0x5748), 0x00},
|
|
{CCI_REG8(0x5749), 0x00},
|
|
{CCI_REG8(0x574a), 0x00},
|
|
{CCI_REG8(0x574b), 0xa4},
|
|
{CCI_REG8(0x7b75), 0x0e},
|
|
{CCI_REG8(0x7b76), 0x09},
|
|
{CCI_REG8(0x7b77), 0x08},
|
|
{CCI_REG8(0x7b78), 0x06},
|
|
{CCI_REG8(0x7b79), 0x34},
|
|
{CCI_REG8(0x7b53), 0x00},
|
|
{CCI_REG8(0x9369), 0x73},
|
|
{CCI_REG8(0x936b), 0x64},
|
|
{CCI_REG8(0x936d), 0x5f},
|
|
{CCI_REG8(0x9304), 0x03},
|
|
{CCI_REG8(0x9305), 0x80},
|
|
{CCI_REG8(0xa2a9), 0x27},
|
|
{CCI_REG8(0xa2b7), 0x03},
|
|
{CCI_REG8(0x0401), 0x00},
|
|
{CCI_REG8(0x0404), 0x00},
|
|
{CCI_REG8(0x0405), 0x10},
|
|
{CCI_REG8(0x0408), 0x01},
|
|
{CCI_REG8(0x0409), 0x5c},
|
|
{CCI_REG8(0x040a), 0x00},
|
|
{CCI_REG8(0x040b), 0x00},
|
|
{CCI_REG8(0x040c), 0x05},
|
|
{CCI_REG8(0x040d), 0x34},
|
|
{CCI_REG8(0x040e), 0x03},
|
|
{CCI_REG8(0x040f), 0xde},
|
|
{CCI_REG8(0x034c), 0x05},
|
|
{CCI_REG8(0x034d), 0x34},
|
|
{CCI_REG8(0x034e), 0x03},
|
|
{CCI_REG8(0x034f), 0xde},
|
|
{CCI_REG8(0x0305), 0x02},
|
|
{CCI_REG8(0x0306), 0x00},
|
|
{CCI_REG8(0x0307), 0xaf},
|
|
{CCI_REG8(0xe04c), 0x00},
|
|
{CCI_REG8(0xe04d), 0x5f},
|
|
{CCI_REG8(0xe04e), 0x00},
|
|
{CCI_REG8(0xe04f), 0x1f},
|
|
{CCI_REG8(0x3f56), 0x00},
|
|
{CCI_REG8(0x3f57), 0xbf},
|
|
};
|
|
|
|
/* Mode configs */
|
|
static const struct imx477_mode supported_modes[] = {
|
|
{
|
|
/* 12MPix 10fps mode */
|
|
.width = 4056,
|
|
.height = 3040,
|
|
.crop = {
|
|
.left = IMX477_PIXEL_ARRAY_LEFT,
|
|
.top = IMX477_PIXEL_ARRAY_TOP,
|
|
.width = 4056,
|
|
.height = 3040,
|
|
},
|
|
.frm_length_default = 3500,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_4056x3040_regs),
|
|
.regs = mode_4056x3040_regs,
|
|
},
|
|
},
|
|
{
|
|
/* 12MPix cropped 16:9 mode */
|
|
.width = 4056,
|
|
.height = 2160,
|
|
.crop = {
|
|
.left = IMX477_PIXEL_ARRAY_LEFT,
|
|
.top = IMX477_PIXEL_ARRAY_TOP + 440,
|
|
.width = 4056,
|
|
.height = 3040,
|
|
},
|
|
.frm_length_default = 10,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_4056x2160_regs),
|
|
.regs = mode_4056x2160_regs,
|
|
},
|
|
},
|
|
{
|
|
/* 2x2 binned 40fps mode */
|
|
.width = 2028,
|
|
.height = 1520,
|
|
.crop = {
|
|
.left = IMX477_PIXEL_ARRAY_LEFT,
|
|
.top = IMX477_PIXEL_ARRAY_TOP,
|
|
.width = 4056,
|
|
.height = 3040,
|
|
},
|
|
.frm_length_default = 2197,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_2028x1520_regs),
|
|
.regs = mode_2028x1520_regs,
|
|
},
|
|
},
|
|
{
|
|
/* 1080p 50fps cropped mode */
|
|
.width = 2028,
|
|
.height = 1080,
|
|
.crop = {
|
|
.left = IMX477_PIXEL_ARRAY_LEFT,
|
|
.top = IMX477_PIXEL_ARRAY_TOP + 440,
|
|
.width = 4056,
|
|
.height = 2160,
|
|
},
|
|
.frm_length_default = 2197,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_2028x1080_regs),
|
|
.regs = mode_2028x1080_regs,
|
|
},
|
|
},
|
|
{
|
|
/* 120fps. 2x2 binned and cropped */
|
|
.width = 1332,
|
|
.height = 990,
|
|
.crop = {
|
|
/*
|
|
* FIXME: the analog crop rectangle is actually
|
|
* programmed with a horizontal displacement of 0
|
|
* pixels, not 4. It gets shrunk after going through
|
|
* the scaler. Move this information to the compose
|
|
* rectangle once the driver is expanded to represent
|
|
* its processing blocks with multiple subdevs.
|
|
*/
|
|
.left = IMX477_PIXEL_ARRAY_LEFT + 696,
|
|
.top = IMX477_PIXEL_ARRAY_TOP + 528,
|
|
.width = 2664,
|
|
.height = 1980,
|
|
},
|
|
.frm_length_default = 1050,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_1332x990_regs),
|
|
.regs = mode_1332x990_regs,
|
|
}
|
|
}
|
|
};
|
|
|
|
/*
|
|
* The supported formats.
|
|
* This table MUST contain 4 entries per format, to cover the various flip
|
|
* combinations in the order
|
|
* - no flip
|
|
* - h flip
|
|
* - v flip
|
|
* - h&v flips
|
|
*/
|
|
static const u32 codes[] = {
|
|
/* 12-bit modes. */
|
|
MEDIA_BUS_FMT_SRGGB12_1X12,
|
|
MEDIA_BUS_FMT_SGRBG12_1X12,
|
|
MEDIA_BUS_FMT_SGBRG12_1X12,
|
|
MEDIA_BUS_FMT_SBGGR12_1X12,
|
|
/* 10-bit modes. */
|
|
MEDIA_BUS_FMT_SRGGB10_1X10,
|
|
MEDIA_BUS_FMT_SGRBG10_1X10,
|
|
MEDIA_BUS_FMT_SGBRG10_1X10,
|
|
MEDIA_BUS_FMT_SBGGR10_1X10,
|
|
/* 8-bit modes. */
|
|
MEDIA_BUS_FMT_SRGGB8_1X8,
|
|
MEDIA_BUS_FMT_SGRBG8_1X8,
|
|
MEDIA_BUS_FMT_SGBRG8_1X8,
|
|
MEDIA_BUS_FMT_SBGGR8_1X8,
|
|
};
|
|
|
|
static const char * const imx477_test_pattern_menu[] = {
|
|
"Disabled",
|
|
"Color Bars",
|
|
"Solid Color",
|
|
"Grey Color Bars",
|
|
"PN9"
|
|
};
|
|
|
|
static const int imx477_test_pattern_val[] = {
|
|
IMX477_TEST_PATTERN_DISABLE,
|
|
IMX477_TEST_PATTERN_COLOR_BARS,
|
|
IMX477_TEST_PATTERN_SOLID_COLOR,
|
|
IMX477_TEST_PATTERN_GREY_COLOR,
|
|
IMX477_TEST_PATTERN_PN9,
|
|
};
|
|
|
|
/* regulator supplies */
|
|
static const char * const imx477_supply_name[] = {
|
|
/* Supplies can be enabled in any order */
|
|
"VANA", /* Analog (2.8V) supply */
|
|
"VDIG", /* Digital Core (1.05V) supply */
|
|
"VDDL", /* IF (1.8V) supply */
|
|
};
|
|
|
|
#define IMX477_NUM_SUPPLIES ARRAY_SIZE(imx477_supply_name)
|
|
|
|
/*
|
|
* Initialisation delay between XCLR low->high and the moment when the sensor
|
|
* can start capture (i.e. can leave software standby), given by T7 in the
|
|
* datasheet is 8ms. This does include I2C setup time as well.
|
|
*
|
|
* Note, that delay between XCLR low->high and reading the CCI ID register (T6
|
|
* in the datasheet) is much smaller - 600us.
|
|
*/
|
|
#define IMX477_XCLR_MIN_DELAY_US 8000
|
|
#define IMX477_XCLR_DELAY_RANGE_US 1000
|
|
|
|
struct imx477_compatible_data {
|
|
unsigned int chip_id;
|
|
struct imx477_reg_list extra_regs;
|
|
};
|
|
|
|
struct imx477 {
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad[NUM_PADS];
|
|
struct regmap *regmap;
|
|
|
|
unsigned int fmt_code;
|
|
|
|
struct clk *xclk;
|
|
u32 xclk_freq;
|
|
|
|
struct gpio_desc *reset_gpio;
|
|
struct regulator_bulk_data supplies[IMX477_NUM_SUPPLIES];
|
|
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
/* V4L2 Controls */
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *exposure;
|
|
struct v4l2_ctrl *vflip;
|
|
struct v4l2_ctrl *hflip;
|
|
struct v4l2_ctrl *vblank;
|
|
struct v4l2_ctrl *hblank;
|
|
|
|
u64 link_freq_value;
|
|
u16 iop_pll_mpy;
|
|
|
|
/* Current mode */
|
|
const struct imx477_mode *mode;
|
|
|
|
/* Trigger mode */
|
|
int trigger_mode_of;
|
|
|
|
/*
|
|
* Mutex for serialized access:
|
|
* Protect sensor module set pad format and start/stop streaming safely.
|
|
*/
|
|
struct mutex mutex;
|
|
|
|
/* Streaming on/off */
|
|
bool streaming;
|
|
|
|
/* Rewrite common registers on stream on? */
|
|
bool common_regs_written;
|
|
|
|
/* Current long exposure factor in use. Set through V4L2_CID_VBLANK */
|
|
unsigned int long_exp_shift;
|
|
|
|
/* Any extra information related to different compatible sensors */
|
|
const struct imx477_compatible_data *compatible_data;
|
|
};
|
|
|
|
static inline struct imx477 *to_imx477(struct v4l2_subdev *_sd)
|
|
{
|
|
return container_of(_sd, struct imx477, sd);
|
|
}
|
|
|
|
/* Get bayer order based on flip setting. */
|
|
static u32 imx477_get_format_code(struct imx477 *imx477, u32 code)
|
|
{
|
|
unsigned int i;
|
|
|
|
lockdep_assert_held(&imx477->mutex);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(codes); i++)
|
|
if (codes[i] == code)
|
|
break;
|
|
|
|
if (i >= ARRAY_SIZE(codes))
|
|
i = 0;
|
|
|
|
i = (i & ~3) | (imx477->vflip->val ? 2 : 0) |
|
|
(imx477->hflip->val ? 1 : 0);
|
|
|
|
return codes[i];
|
|
}
|
|
|
|
static void imx477_set_default_format(struct imx477 *imx477)
|
|
{
|
|
/* Set default mode to max resolution */
|
|
imx477->mode = &supported_modes[0];
|
|
imx477->fmt_code = MEDIA_BUS_FMT_SRGGB12_1X12;
|
|
}
|
|
|
|
static int imx477_get_bpp(unsigned int code)
|
|
{
|
|
switch (code) {
|
|
default:
|
|
case MEDIA_BUS_FMT_SRGGB12_1X12:
|
|
case MEDIA_BUS_FMT_SGRBG12_1X12:
|
|
case MEDIA_BUS_FMT_SGBRG12_1X12:
|
|
case MEDIA_BUS_FMT_SBGGR12_1X12:
|
|
return 12;
|
|
|
|
case MEDIA_BUS_FMT_SRGGB10_1X10:
|
|
case MEDIA_BUS_FMT_SGRBG10_1X10:
|
|
case MEDIA_BUS_FMT_SGBRG10_1X10:
|
|
case MEDIA_BUS_FMT_SBGGR10_1X10:
|
|
return 10;
|
|
|
|
case MEDIA_BUS_FMT_SRGGB8_1X8:
|
|
case MEDIA_BUS_FMT_SGRBG8_1X8:
|
|
case MEDIA_BUS_FMT_SGBRG8_1X8:
|
|
case MEDIA_BUS_FMT_SBGGR8_1X8:
|
|
return 8;
|
|
}
|
|
}
|
|
|
|
static int imx477_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
struct v4l2_mbus_framefmt *try_fmt_img =
|
|
v4l2_subdev_state_get_format(fh->state, IMAGE_PAD);
|
|
struct v4l2_mbus_framefmt *try_fmt_meta =
|
|
v4l2_subdev_state_get_format(fh->state, METADATA_PAD);
|
|
struct v4l2_rect *try_crop;
|
|
|
|
mutex_lock(&imx477->mutex);
|
|
|
|
/* Initialize try_fmt for the image pad */
|
|
try_fmt_img->width = supported_modes[0].width;
|
|
try_fmt_img->height = supported_modes[0].height;
|
|
try_fmt_img->code = imx477_get_format_code(imx477,
|
|
MEDIA_BUS_FMT_SRGGB12_1X12);
|
|
try_fmt_img->field = V4L2_FIELD_NONE;
|
|
|
|
/* Initialize try_fmt for the embedded metadata pad */
|
|
try_fmt_meta->width = IMX477_EMBEDDED_LINE_WIDTH;
|
|
try_fmt_meta->height = IMX477_NUM_EMBEDDED_LINES;
|
|
try_fmt_meta->code = MEDIA_BUS_FMT_SENSOR_DATA;
|
|
try_fmt_meta->field = V4L2_FIELD_NONE;
|
|
|
|
/* Initialize try_crop */
|
|
try_crop = v4l2_subdev_state_get_crop(fh->state, IMAGE_PAD);
|
|
try_crop->left = IMX477_PIXEL_ARRAY_LEFT;
|
|
try_crop->top = IMX477_PIXEL_ARRAY_TOP;
|
|
try_crop->width = IMX477_PIXEL_ARRAY_WIDTH;
|
|
try_crop->height = IMX477_PIXEL_ARRAY_HEIGHT;
|
|
|
|
mutex_unlock(&imx477->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx477_adjust_exposure_range(struct imx477 *imx477)
|
|
{
|
|
int exposure_max, exposure_def;
|
|
|
|
/* Honour the VBLANK limits when setting exposure. */
|
|
exposure_max = imx477->mode->height + imx477->vblank->val -
|
|
IMX477_EXPOSURE_OFFSET;
|
|
exposure_def = min(exposure_max, imx477->exposure->val);
|
|
__v4l2_ctrl_modify_range(imx477->exposure, imx477->exposure->minimum,
|
|
exposure_max, imx477->exposure->step,
|
|
exposure_def);
|
|
}
|
|
|
|
static int imx477_set_frame_length(struct imx477 *imx477, unsigned int val)
|
|
{
|
|
int ret = 0;
|
|
|
|
imx477->long_exp_shift = 0;
|
|
|
|
while (val > IMX477_FRAME_LENGTH_MAX) {
|
|
imx477->long_exp_shift++;
|
|
val >>= 1;
|
|
}
|
|
|
|
ret = cci_write(imx477->regmap, IMX477_REG_FRAME_LENGTH, val, NULL);
|
|
|
|
return cci_write(imx477->regmap, IMX477_LONG_EXP_SHIFT_REG,
|
|
imx477->long_exp_shift, &ret);
|
|
}
|
|
|
|
static int imx477_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct imx477 *imx477 =
|
|
container_of(ctrl->handler, struct imx477, ctrl_handler);
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
int ret = 0;
|
|
|
|
/*
|
|
* The VBLANK control may change the limits of usable exposure, so check
|
|
* and adjust if necessary.
|
|
*/
|
|
if (ctrl->id == V4L2_CID_VBLANK)
|
|
imx477_adjust_exposure_range(imx477);
|
|
|
|
/*
|
|
* Applying V4L2 control value only happens
|
|
* when power is up for streaming
|
|
*/
|
|
if (pm_runtime_get_if_in_use(&client->dev) == 0)
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
ret = cci_write(imx477->regmap, IMX477_REG_ANALOG_GAIN,
|
|
ctrl->val, NULL);
|
|
break;
|
|
case V4L2_CID_EXPOSURE:
|
|
ret = cci_write(imx477->regmap, IMX477_REG_EXPOSURE,
|
|
ctrl->val >> imx477->long_exp_shift, NULL);
|
|
break;
|
|
case V4L2_CID_DIGITAL_GAIN:
|
|
ret = cci_write(imx477->regmap, IMX477_REG_DIGITAL_GAIN,
|
|
ctrl->val, NULL);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN:
|
|
ret = cci_write(imx477->regmap, IMX477_REG_TEST_PATTERN,
|
|
imx477_test_pattern_val[ctrl->val], NULL);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN_RED:
|
|
ret = cci_write(imx477->regmap, IMX477_REG_TEST_PATTERN_R,
|
|
ctrl->val, NULL);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN_GREENR:
|
|
ret = cci_write(imx477->regmap, IMX477_REG_TEST_PATTERN_GR,
|
|
ctrl->val, NULL);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN_BLUE:
|
|
ret = cci_write(imx477->regmap, IMX477_REG_TEST_PATTERN_B,
|
|
ctrl->val, NULL);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN_GREENB:
|
|
ret = cci_write(imx477->regmap, IMX477_REG_TEST_PATTERN_GB,
|
|
ctrl->val, NULL);
|
|
break;
|
|
case V4L2_CID_HFLIP:
|
|
case V4L2_CID_VFLIP:
|
|
ret = cci_write(imx477->regmap, IMX477_REG_ORIENTATION,
|
|
imx477->hflip->val | imx477->vflip->val << 1,
|
|
NULL);
|
|
break;
|
|
case V4L2_CID_VBLANK:
|
|
ret = imx477_set_frame_length(imx477,
|
|
imx477->mode->height + ctrl->val);
|
|
break;
|
|
case V4L2_CID_HBLANK:
|
|
ret = cci_write(imx477->regmap, IMX477_REG_LINE_LENGTH,
|
|
imx477->mode->width + ctrl->val, NULL);
|
|
break;
|
|
default:
|
|
dev_info(&client->dev,
|
|
"ctrl(id:0x%x,val:0x%x) is not handled\n",
|
|
ctrl->id, ctrl->val);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(&client->dev);
|
|
pm_runtime_put_autosuspend(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops imx477_ctrl_ops = {
|
|
.s_ctrl = imx477_set_ctrl,
|
|
};
|
|
|
|
static int imx477_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
|
|
if (code->pad >= NUM_PADS)
|
|
return -EINVAL;
|
|
|
|
if (code->pad == IMAGE_PAD) {
|
|
if (code->index >= (ARRAY_SIZE(codes) / 4))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&imx477->mutex);
|
|
code->code = imx477_get_format_code(imx477,
|
|
codes[code->index * 4]);
|
|
mutex_unlock(&imx477->mutex);
|
|
} else {
|
|
if (code->index > 0)
|
|
return -EINVAL;
|
|
|
|
code->code = MEDIA_BUS_FMT_SENSOR_DATA;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx477_enum_frame_size(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
u32 code;
|
|
|
|
if (fse->pad >= NUM_PADS)
|
|
return -EINVAL;
|
|
|
|
if (fse->pad == IMAGE_PAD) {
|
|
if (fse->index >= ARRAY_SIZE(supported_modes))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&imx477->mutex);
|
|
code = imx477_get_format_code(imx477, fse->code);
|
|
mutex_unlock(&imx477->mutex);
|
|
|
|
if (fse->code != code)
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
fse->max_width = fse->min_width;
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
fse->max_height = fse->min_height;
|
|
} else {
|
|
if (fse->code != MEDIA_BUS_FMT_SENSOR_DATA || fse->index > 0)
|
|
return -EINVAL;
|
|
|
|
fse->min_width = IMX477_EMBEDDED_LINE_WIDTH;
|
|
fse->max_width = fse->min_width;
|
|
fse->min_height = IMX477_NUM_EMBEDDED_LINES;
|
|
fse->max_height = fse->min_height;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx477_reset_colorspace(struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
fmt->colorspace = V4L2_COLORSPACE_RAW;
|
|
fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
|
|
fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
|
|
fmt->colorspace,
|
|
fmt->ycbcr_enc);
|
|
fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
|
|
}
|
|
|
|
static void imx477_update_image_pad_format(struct imx477 *imx477,
|
|
const struct imx477_mode *mode,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
fmt->format.width = mode->width;
|
|
fmt->format.height = mode->height;
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
imx477_reset_colorspace(&fmt->format);
|
|
}
|
|
|
|
static void imx477_update_metadata_pad_format(struct v4l2_subdev_format *fmt)
|
|
{
|
|
fmt->format.width = IMX477_EMBEDDED_LINE_WIDTH;
|
|
fmt->format.height = IMX477_NUM_EMBEDDED_LINES;
|
|
fmt->format.code = MEDIA_BUS_FMT_SENSOR_DATA;
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
}
|
|
|
|
static int imx477_get_pad_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
|
|
if (fmt->pad >= NUM_PADS)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&imx477->mutex);
|
|
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
struct v4l2_mbus_framefmt *try_fmt =
|
|
v4l2_subdev_state_get_format(sd_state,
|
|
fmt->pad);
|
|
/* update the code which could change due to vflip or hflip: */
|
|
try_fmt->code = fmt->pad == IMAGE_PAD ?
|
|
imx477_get_format_code(imx477, try_fmt->code) :
|
|
MEDIA_BUS_FMT_SENSOR_DATA;
|
|
fmt->format = *try_fmt;
|
|
} else {
|
|
if (fmt->pad == IMAGE_PAD) {
|
|
imx477_update_image_pad_format(imx477, imx477->mode,
|
|
fmt);
|
|
fmt->format.code =
|
|
imx477_get_format_code(imx477, imx477->fmt_code);
|
|
} else {
|
|
imx477_update_metadata_pad_format(fmt);
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&imx477->mutex);
|
|
return 0;
|
|
}
|
|
|
|
static void imx477_set_framing_limits(struct imx477 *imx477)
|
|
{
|
|
unsigned int hblank_min;
|
|
u64 line_length_min;
|
|
int bpp;
|
|
const struct imx477_mode *mode = imx477->mode;
|
|
|
|
/* Default to no long exposure multiplier. */
|
|
imx477->long_exp_shift = 0;
|
|
|
|
/* Update limits and set FPS to default */
|
|
__v4l2_ctrl_modify_range(imx477->vblank,
|
|
IMX477_VBLANK_MIN,
|
|
((1 << IMX477_LONG_EXP_SHIFT_MAX) *
|
|
IMX477_FRAME_LENGTH_MAX) - mode->height,
|
|
1, mode->frm_length_default - mode->height);
|
|
|
|
/* Setting this will adjust the exposure limits as well. */
|
|
__v4l2_ctrl_s_ctrl(imx477->vblank,
|
|
mode->frm_length_default - mode->height);
|
|
|
|
bpp = imx477_get_bpp(imx477->fmt_code);
|
|
|
|
line_length_min = mode->width * bpp * (u64)IMX477_PIXEL_RATE;
|
|
do_div(line_length_min, imx477->link_freq_value * 2 * 2 /*LANES*/);
|
|
/* Allow 500pixel clocks for HS<>LP transitions (approx 0.6usecs) */
|
|
line_length_min += 500;
|
|
|
|
/*
|
|
* 1332x990 12bit mode appears to need additional horizontal blanking
|
|
* compared to all other modes. Empirically determined setting with
|
|
* link freq of 750MHz where it still gives valid images. The limit
|
|
* leaves all other modes unchanged as their line times are inherently
|
|
* greater.
|
|
*/
|
|
if (bpp == 12)
|
|
line_length_min = max(line_length_min, 1332 + 4600);
|
|
|
|
hblank_min = line_length_min - mode->width;
|
|
__v4l2_ctrl_modify_range(imx477->hblank, hblank_min,
|
|
IMX477_LINE_LENGTH_MAX, 1, hblank_min);
|
|
__v4l2_ctrl_s_ctrl(imx477->hblank, hblank_min);
|
|
}
|
|
|
|
static int imx477_set_pad_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct v4l2_mbus_framefmt *framefmt;
|
|
const struct imx477_mode *mode;
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
|
|
if (fmt->pad >= NUM_PADS)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&imx477->mutex);
|
|
|
|
if (fmt->pad == IMAGE_PAD) {
|
|
/* Bayer order varies with flips */
|
|
fmt->format.code = imx477_get_format_code(imx477,
|
|
fmt->format.code);
|
|
|
|
mode = v4l2_find_nearest_size(supported_modes,
|
|
ARRAY_SIZE(supported_modes),
|
|
width, height,
|
|
fmt->format.width,
|
|
fmt->format.height);
|
|
imx477_update_image_pad_format(imx477, mode, fmt);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
framefmt = v4l2_subdev_state_get_format(sd_state,
|
|
fmt->pad);
|
|
*framefmt = fmt->format;
|
|
} else if (imx477->mode != mode ||
|
|
imx477->fmt_code != fmt->format.code) {
|
|
imx477->mode = mode;
|
|
imx477->fmt_code = fmt->format.code;
|
|
imx477_set_framing_limits(imx477);
|
|
}
|
|
} else {
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
framefmt = v4l2_subdev_state_get_format(sd_state,
|
|
fmt->pad);
|
|
*framefmt = fmt->format;
|
|
} else {
|
|
/* Only one embedded data mode is supported */
|
|
imx477_update_metadata_pad_format(fmt);
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&imx477->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_rect *
|
|
__imx477_get_pad_crop(struct imx477 *imx477,
|
|
struct v4l2_subdev_state *sd_state,
|
|
unsigned int pad, enum v4l2_subdev_format_whence which)
|
|
{
|
|
switch (which) {
|
|
case V4L2_SUBDEV_FORMAT_TRY:
|
|
return v4l2_subdev_state_get_crop(sd_state, pad);
|
|
case V4L2_SUBDEV_FORMAT_ACTIVE:
|
|
return &imx477->mode->crop;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int imx477_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
switch (sel->target) {
|
|
case V4L2_SEL_TGT_CROP: {
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
|
|
mutex_lock(&imx477->mutex);
|
|
sel->r = *__imx477_get_pad_crop(imx477, sd_state, sel->pad,
|
|
sel->which);
|
|
mutex_unlock(&imx477->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
case V4L2_SEL_TGT_NATIVE_SIZE:
|
|
sel->r.left = 0;
|
|
sel->r.top = 0;
|
|
sel->r.width = IMX477_NATIVE_WIDTH;
|
|
sel->r.height = IMX477_NATIVE_HEIGHT;
|
|
|
|
return 0;
|
|
|
|
case V4L2_SEL_TGT_CROP_DEFAULT:
|
|
case V4L2_SEL_TGT_CROP_BOUNDS:
|
|
sel->r.left = IMX477_PIXEL_ARRAY_LEFT;
|
|
sel->r.top = IMX477_PIXEL_ARRAY_TOP;
|
|
sel->r.width = IMX477_PIXEL_ARRAY_WIDTH;
|
|
sel->r.height = IMX477_PIXEL_ARRAY_HEIGHT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Start streaming */
|
|
static int imx477_start_streaming(struct imx477 *imx477)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
const struct imx477_reg_list *reg_list;
|
|
const struct imx477_reg_list *extra_regs;
|
|
unsigned int fst_width;
|
|
unsigned int fst_mult;
|
|
int ret, tm, bpp;
|
|
|
|
if (!imx477->common_regs_written) {
|
|
ret = cci_multi_reg_write(imx477->regmap, mode_common_regs,
|
|
ARRAY_SIZE(mode_common_regs), NULL);
|
|
|
|
extra_regs = &imx477->compatible_data->extra_regs;
|
|
cci_multi_reg_write(imx477->regmap, extra_regs->regs,
|
|
extra_regs->num_of_regs, &ret);
|
|
|
|
/* Update the link frequency PLL multiplier register */
|
|
cci_write(imx477->regmap, IMX477_REG_IOP_MPY,
|
|
imx477->iop_pll_mpy, &ret);
|
|
|
|
/*
|
|
* Bit rate = link freq * 2 for DDR * 2 for num lanes.
|
|
* 16p16 fixed point in the register. Ignore fractional part.
|
|
*/
|
|
cci_write(imx477->regmap, IMX477_REG_REQ_LINK_BIT_RATE,
|
|
(((unsigned long)imx477->link_freq_value / 1000000) * 2 * 2) << 16,
|
|
&ret);
|
|
/*
|
|
* DPHY timings are those specified for 450MHz. Switch to auto
|
|
* if using some other link frequency
|
|
*/
|
|
if (imx477->link_freq_value != 450000000UL)
|
|
cci_write(imx477->regmap, IMX477_REG_DPHY_CTRL,
|
|
IMX477_DPHY_CTRL_AUTO, &ret);
|
|
|
|
if (ret) {
|
|
dev_err(&client->dev, "%s failed to set common settings\n",
|
|
__func__);
|
|
return ret;
|
|
}
|
|
imx477->common_regs_written = true;
|
|
}
|
|
|
|
/* Apply default values of current mode */
|
|
reg_list = &imx477->mode->reg_list;
|
|
cci_multi_reg_write(imx477->regmap, reg_list->regs,
|
|
reg_list->num_of_regs, &ret);
|
|
if (ret) {
|
|
dev_err(&client->dev, "%s failed to set mode\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
fst_width = max((unsigned int)fstrobe_width, 1U);
|
|
fst_mult = 1;
|
|
|
|
while (fst_width / fst_mult > 0xffff && fst_mult < 255)
|
|
fst_mult++;
|
|
|
|
fst_width /= fst_mult;
|
|
|
|
// FLASH_MD_RS
|
|
cci_write(imx477->regmap, CCI_REG8(0x0c1A),
|
|
((!!fstrobe_cont_trig) | (1 << 1)), &ret);
|
|
// FLASH_STRB_WIDTH
|
|
cci_write(imx477->regmap, CCI_REG16(0x0c18), fst_width, &ret);
|
|
// FLASH_STRB_WIDTH adjust
|
|
cci_write(imx477->regmap, CCI_REG8(0x0c12), fst_mult, &ret);
|
|
// FLASH_STRB_START_POINT
|
|
cci_write(imx477->regmap, CCI_REG16(0x0c14), fstrobe_delay, &ret);
|
|
// FLASH_STRB_DLY_RS
|
|
cci_write(imx477->regmap, CCI_REG8(0x0c16), 0, &ret);
|
|
// FLASH_TRIG_RS
|
|
cci_write(imx477->regmap, CCI_REG8(0x0c1B), !!fstrobe_enable, &ret);
|
|
|
|
bpp = imx477_get_bpp(imx477->fmt_code);
|
|
cci_write(imx477->regmap, IMX477_REG_CSI_DT_FMT_H, bpp, &ret);
|
|
cci_write(imx477->regmap, IMX477_REG_CSI_DT_FMT_L, bpp, &ret);
|
|
cci_write(imx477->regmap, IMX477_REG_IOP_PXCK_DIV, bpp, &ret);
|
|
cci_write(imx477->regmap, IMX477_REG_ADBIT_MODE, bpp == 12 ? 1 : 0,
|
|
&ret);
|
|
|
|
/* Set on-sensor DPC. */
|
|
cci_write(imx477->regmap, CCI_REG8(0x0b05), !!dpc_enable, &ret);
|
|
cci_write(imx477->regmap, CCI_REG8(0x0b06), !!dpc_enable, &ret);
|
|
|
|
/* Apply customized values from user */
|
|
ret = __v4l2_ctrl_handler_setup(imx477->sd.ctrl_handler);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Set vsync trigger mode: 0=standalone, 1=source, 2=sink */
|
|
tm = (imx477->trigger_mode_of >= 0) ? imx477->trigger_mode_of : trigger_mode;
|
|
if (tm == 1)
|
|
cci_write(imx477->regmap, IMX477_REG_TEMP_SEN_CTL, 0, &ret);
|
|
cci_write(imx477->regmap, IMX477_REG_EXTOUT_EN, (tm == 1) ? 1 : 0,
|
|
&ret);
|
|
cci_write(imx477->regmap, IMX477_REG_MS_SEL, (tm <= 1) ? 1 : 0, &ret);
|
|
cci_write(imx477->regmap, IMX477_REG_XVS_IO_CTRL, (tm == 1) ? 1 : 0,
|
|
&ret);
|
|
cci_write(imx477->regmap, IMX477_REG_MC_MODE, (tm > 0) ? 1 : 0, &ret);
|
|
|
|
/* set stream on register */
|
|
cci_write(imx477->regmap, IMX477_REG_MODE_SELECT,
|
|
IMX477_MODE_STREAMING, &ret);
|
|
|
|
/* now it's safe to re-enable temp sensor without glitching XVS */
|
|
if (tm == 1)
|
|
cci_write(imx477->regmap, IMX477_REG_TEMP_SEN_CTL, 1, &ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Stop streaming */
|
|
static void imx477_stop_streaming(struct imx477 *imx477)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
int ret;
|
|
|
|
/* set stream off register */
|
|
ret = cci_write(imx477->regmap, IMX477_REG_MODE_SELECT,
|
|
IMX477_MODE_STANDBY, NULL);
|
|
if (ret)
|
|
dev_err(&client->dev, "%s failed to set stream\n", __func__);
|
|
|
|
/* Stop driving XVS out (there is still a weak pull-up) */
|
|
cci_write(imx477->regmap, IMX477_REG_EXTOUT_EN, 0, NULL);
|
|
}
|
|
|
|
static int imx477_set_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&imx477->mutex);
|
|
if (imx477->streaming == enable) {
|
|
mutex_unlock(&imx477->mutex);
|
|
return 0;
|
|
}
|
|
|
|
if (enable) {
|
|
ret = pm_runtime_resume_and_get(&client->dev);
|
|
if (ret < 0)
|
|
goto err_unlock;
|
|
|
|
/*
|
|
* Apply default & customized values
|
|
* and then start streaming.
|
|
*/
|
|
ret = imx477_start_streaming(imx477);
|
|
if (ret) {
|
|
pm_runtime_put_sync(&client->dev);
|
|
goto err_unlock;
|
|
}
|
|
} else {
|
|
imx477_stop_streaming(imx477);
|
|
pm_runtime_mark_last_busy(&client->dev);
|
|
pm_runtime_put_autosuspend(&client->dev);
|
|
}
|
|
|
|
imx477->streaming = enable;
|
|
|
|
/* vflip and hflip cannot change during streaming */
|
|
__v4l2_ctrl_grab(imx477->vflip, enable);
|
|
__v4l2_ctrl_grab(imx477->hflip, enable);
|
|
|
|
mutex_unlock(&imx477->mutex);
|
|
|
|
return ret;
|
|
|
|
err_unlock:
|
|
mutex_unlock(&imx477->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Power/clock management functions */
|
|
static int imx477_power_on(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(IMX477_NUM_SUPPLIES,
|
|
imx477->supplies);
|
|
if (ret) {
|
|
dev_err(&client->dev, "%s: failed to enable regulators\n",
|
|
__func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(imx477->xclk);
|
|
if (ret) {
|
|
dev_err(&client->dev, "%s: failed to enable clock\n",
|
|
__func__);
|
|
goto reg_off;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(imx477->reset_gpio, 1);
|
|
usleep_range(IMX477_XCLR_MIN_DELAY_US,
|
|
IMX477_XCLR_MIN_DELAY_US + IMX477_XCLR_DELAY_RANGE_US);
|
|
|
|
return 0;
|
|
|
|
reg_off:
|
|
regulator_bulk_disable(IMX477_NUM_SUPPLIES, imx477->supplies);
|
|
return ret;
|
|
}
|
|
|
|
static int imx477_power_off(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
|
|
gpiod_set_value_cansleep(imx477->reset_gpio, 0);
|
|
regulator_bulk_disable(IMX477_NUM_SUPPLIES, imx477->supplies);
|
|
clk_disable_unprepare(imx477->xclk);
|
|
|
|
/* Force reprogramming of the common registers when powered up again. */
|
|
imx477->common_regs_written = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx477_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
|
|
if (imx477->streaming)
|
|
imx477_stop_streaming(imx477);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx477_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
int ret;
|
|
|
|
if (imx477->streaming) {
|
|
ret = imx477_start_streaming(imx477);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error:
|
|
imx477_stop_streaming(imx477);
|
|
imx477->streaming = 0;
|
|
return ret;
|
|
}
|
|
|
|
static int imx477_get_regulators(struct imx477 *imx477)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < IMX477_NUM_SUPPLIES; i++)
|
|
imx477->supplies[i].supply = imx477_supply_name[i];
|
|
|
|
return devm_regulator_bulk_get(&client->dev,
|
|
IMX477_NUM_SUPPLIES,
|
|
imx477->supplies);
|
|
}
|
|
|
|
/* Verify chip ID */
|
|
static int imx477_identify_module(struct imx477 *imx477, u32 expected_id)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
int ret;
|
|
u64 val;
|
|
|
|
ret = cci_read(imx477->regmap, IMX477_REG_CHIP_ID, &val, NULL);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to read chip id %x, with error %d\n",
|
|
expected_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (val != expected_id) {
|
|
dev_err(&client->dev, "chip id mismatch: %x!=%llx\n",
|
|
expected_id, val);
|
|
return -EIO;
|
|
}
|
|
|
|
dev_info(&client->dev, "Device found is imx%llx\n", val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_subdev_core_ops imx477_core_ops = {
|
|
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
|
|
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops imx477_video_ops = {
|
|
.s_stream = imx477_set_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops imx477_pad_ops = {
|
|
.enum_mbus_code = imx477_enum_mbus_code,
|
|
.get_fmt = imx477_get_pad_format,
|
|
.set_fmt = imx477_set_pad_format,
|
|
.get_selection = imx477_get_selection,
|
|
.enum_frame_size = imx477_enum_frame_size,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops imx477_subdev_ops = {
|
|
.core = &imx477_core_ops,
|
|
.video = &imx477_video_ops,
|
|
.pad = &imx477_pad_ops,
|
|
};
|
|
|
|
static const struct v4l2_subdev_internal_ops imx477_internal_ops = {
|
|
.open = imx477_open,
|
|
};
|
|
|
|
/* Initialize control handlers */
|
|
static int imx477_init_controls(struct imx477 *imx477)
|
|
{
|
|
struct v4l2_ctrl_handler *ctrl_hdlr;
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
|
|
struct v4l2_fwnode_device_properties props;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
ctrl_hdlr = &imx477->ctrl_handler;
|
|
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 16);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_init(&imx477->mutex);
|
|
ctrl_hdlr->lock = &imx477->mutex;
|
|
|
|
/* By default, PIXEL_RATE is read only */
|
|
imx477->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
V4L2_CID_PIXEL_RATE,
|
|
IMX477_PIXEL_RATE,
|
|
IMX477_PIXEL_RATE, 1,
|
|
IMX477_PIXEL_RATE);
|
|
if (imx477->pixel_rate)
|
|
imx477->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
/* LINK_FREQ is also read only */
|
|
imx477->link_freq =
|
|
v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx477_ctrl_ops,
|
|
V4L2_CID_LINK_FREQ, 0, 0,
|
|
&imx477->link_freq_value);
|
|
if (imx477->link_freq)
|
|
imx477->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
/*
|
|
* Create the controls here, but mode specific limits are setup
|
|
* in the imx477_set_framing_limits() call below.
|
|
*/
|
|
imx477->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
V4L2_CID_VBLANK, IMX477_VBLANK_MIN,
|
|
0xffff, 1, IMX477_VBLANK_MIN);
|
|
imx477->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
V4L2_CID_HBLANK, 0, 0xffff, 1, 0);
|
|
|
|
imx477->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
V4L2_CID_EXPOSURE,
|
|
IMX477_EXPOSURE_MIN,
|
|
IMX477_EXPOSURE_MAX,
|
|
IMX477_EXPOSURE_STEP,
|
|
IMX477_EXPOSURE_DEFAULT);
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
|
|
IMX477_ANA_GAIN_MIN, IMX477_ANA_GAIN_MAX,
|
|
IMX477_ANA_GAIN_STEP, IMX477_ANA_GAIN_DEFAULT);
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
|
|
IMX477_DGTL_GAIN_MIN, IMX477_DGTL_GAIN_MAX,
|
|
IMX477_DGTL_GAIN_STEP, IMX477_DGTL_GAIN_DEFAULT);
|
|
|
|
imx477->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
if (imx477->hflip)
|
|
imx477->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
|
|
|
|
imx477->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
if (imx477->vflip)
|
|
imx477->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
|
|
|
|
v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx477_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN,
|
|
ARRAY_SIZE(imx477_test_pattern_menu) - 1,
|
|
0, 0, imx477_test_pattern_menu);
|
|
for (i = 0; i < 4; i++) {
|
|
/*
|
|
* The assumption is that
|
|
* V4L2_CID_TEST_PATTERN_GREENR == V4L2_CID_TEST_PATTERN_RED + 1
|
|
* V4L2_CID_TEST_PATTERN_BLUE == V4L2_CID_TEST_PATTERN_RED + 2
|
|
* V4L2_CID_TEST_PATTERN_GREENB == V4L2_CID_TEST_PATTERN_RED + 3
|
|
*/
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN_RED + i,
|
|
IMX477_TEST_PATTERN_COLOUR_MIN,
|
|
IMX477_TEST_PATTERN_COLOUR_MAX,
|
|
IMX477_TEST_PATTERN_COLOUR_STEP,
|
|
IMX477_TEST_PATTERN_COLOUR_MAX);
|
|
/* The "Solid color" pattern is white by default */
|
|
}
|
|
|
|
if (ctrl_hdlr->error) {
|
|
ret = ctrl_hdlr->error;
|
|
dev_err(&client->dev, "%s control init failed (%d)\n",
|
|
__func__, ret);
|
|
goto error;
|
|
}
|
|
|
|
ret = v4l2_fwnode_device_parse(&client->dev, &props);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx477_ctrl_ops,
|
|
&props);
|
|
if (ret)
|
|
goto error;
|
|
|
|
imx477->sd.ctrl_handler = ctrl_hdlr;
|
|
|
|
mutex_lock(&imx477->mutex);
|
|
|
|
/* Setup exposure and frame/line length limits. */
|
|
imx477_set_framing_limits(imx477);
|
|
|
|
mutex_unlock(&imx477->mutex);
|
|
|
|
return 0;
|
|
|
|
error:
|
|
v4l2_ctrl_handler_free(ctrl_hdlr);
|
|
mutex_destroy(&imx477->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void imx477_free_controls(struct imx477 *imx477)
|
|
{
|
|
v4l2_ctrl_handler_free(imx477->sd.ctrl_handler);
|
|
mutex_destroy(&imx477->mutex);
|
|
}
|
|
|
|
static int imx477_check_link_freq(u64 link_frequency, u16 *mpy_out)
|
|
{
|
|
u64 mpy = link_frequency * 2 * IMX477_IOP_SYSCK_DIV * IMX477_IOP_PREDIV;
|
|
u64 tmp;
|
|
|
|
do_div(mpy, IMX477_XCLK_FREQ);
|
|
|
|
tmp = mpy * (IMX477_XCLK_FREQ / IMX477_IOP_PREDIV);
|
|
do_div(tmp, IMX477_IOP_SYSCK_DIV * 2);
|
|
|
|
if (tmp != link_frequency)
|
|
return -EINVAL;
|
|
|
|
if (mpy_out)
|
|
*mpy_out = mpy;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx477_check_hwcfg(struct device *dev, struct imx477 *imx477)
|
|
{
|
|
struct fwnode_handle *endpoint;
|
|
struct v4l2_fwnode_endpoint ep_cfg = {
|
|
.bus_type = V4L2_MBUS_CSI2_DPHY
|
|
};
|
|
int ret = -EINVAL;
|
|
int i;
|
|
|
|
endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
|
|
if (!endpoint) {
|
|
dev_err(dev, "endpoint node not found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep_cfg)) {
|
|
dev_err(dev, "could not parse endpoint\n");
|
|
goto error_out;
|
|
}
|
|
|
|
/* Check the number of MIPI CSI2 data lanes */
|
|
if (ep_cfg.bus.mipi_csi2.num_data_lanes != 2) {
|
|
dev_err(dev, "only 2 data lanes are currently supported\n");
|
|
goto error_out;
|
|
}
|
|
|
|
/* Check the link frequency set in device tree */
|
|
if (!ep_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "link-frequency property not found in DT\n");
|
|
goto error_out;
|
|
}
|
|
|
|
for (i = 0; i < ep_cfg.nr_of_link_frequencies; i++) {
|
|
if (!imx477_check_link_freq(ep_cfg.link_frequencies[i],
|
|
&imx477->iop_pll_mpy)) {
|
|
imx477->link_freq_value = ep_cfg.link_frequencies[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == ep_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "No supported link frequency configured\n");
|
|
ret = -EINVAL;
|
|
goto error_out;
|
|
}
|
|
|
|
ret = 0;
|
|
|
|
error_out:
|
|
v4l2_fwnode_endpoint_free(&ep_cfg);
|
|
fwnode_handle_put(endpoint);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct imx477_compatible_data imx477_compatible = {
|
|
.chip_id = IMX477_CHIP_ID,
|
|
.extra_regs = {
|
|
.num_of_regs = 0,
|
|
.regs = NULL
|
|
}
|
|
};
|
|
|
|
static const struct cci_reg_sequence imx378_regs[] = {
|
|
{CCI_REG8(0x3e35), 0x01},
|
|
{CCI_REG8(0x4421), 0x08},
|
|
{CCI_REG8(0x3ff9), 0x00},
|
|
};
|
|
|
|
static const struct imx477_compatible_data imx378_compatible = {
|
|
.chip_id = IMX378_CHIP_ID,
|
|
.extra_regs = {
|
|
.num_of_regs = ARRAY_SIZE(imx378_regs),
|
|
.regs = imx378_regs
|
|
}
|
|
};
|
|
|
|
static const struct of_device_id imx477_dt_ids[] = {
|
|
{ .compatible = "sony,imx477", .data = &imx477_compatible },
|
|
{ .compatible = "sony,imx378", .data = &imx378_compatible },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static int imx477_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct imx477 *imx477;
|
|
const struct of_device_id *match;
|
|
int ret;
|
|
u32 tm_of;
|
|
|
|
imx477 = devm_kzalloc(&client->dev, sizeof(*imx477), GFP_KERNEL);
|
|
if (!imx477)
|
|
return -ENOMEM;
|
|
|
|
v4l2_i2c_subdev_init(&imx477->sd, client, &imx477_subdev_ops);
|
|
|
|
imx477->regmap = devm_cci_regmap_init_i2c(client, 16);
|
|
if (IS_ERR(imx477->regmap)) {
|
|
ret = PTR_ERR(imx477->regmap);
|
|
dev_err(&client->dev, "failed to initialize CCI: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
match = of_match_device(imx477_dt_ids, dev);
|
|
if (!match)
|
|
return -ENODEV;
|
|
imx477->compatible_data =
|
|
(const struct imx477_compatible_data *)match->data;
|
|
|
|
/* Check the hardware configuration in device tree */
|
|
if (imx477_check_hwcfg(dev, imx477))
|
|
return -EINVAL;
|
|
|
|
/* Default the trigger mode from OF to -1, which means invalid */
|
|
ret = of_property_read_u32(dev->of_node, "trigger-mode", &tm_of);
|
|
imx477->trigger_mode_of = (ret == 0) ? tm_of : -1;
|
|
|
|
/* Get system clock (xclk) */
|
|
imx477->xclk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(imx477->xclk)) {
|
|
dev_err(dev, "failed to get xclk\n");
|
|
return PTR_ERR(imx477->xclk);
|
|
}
|
|
|
|
imx477->xclk_freq = clk_get_rate(imx477->xclk);
|
|
if (imx477->xclk_freq != IMX477_XCLK_FREQ) {
|
|
dev_err(dev, "xclk frequency not supported: %d Hz\n",
|
|
imx477->xclk_freq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = imx477_get_regulators(imx477);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Request optional enable pin */
|
|
imx477->reset_gpio = devm_gpiod_get_optional(dev, "reset",
|
|
GPIOD_OUT_HIGH);
|
|
|
|
/*
|
|
* The sensor must be powered for imx477_identify_module()
|
|
* to be able to read the CHIP_ID register
|
|
*/
|
|
ret = imx477_power_on(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = imx477_identify_module(imx477, imx477->compatible_data->chip_id);
|
|
if (ret)
|
|
goto error_power_off;
|
|
|
|
/* Initialize default format */
|
|
imx477_set_default_format(imx477);
|
|
|
|
/*
|
|
* Enable runtime PM with 5s autosuspend. As the device has been powered
|
|
* manually, mark it as active, and increase the usage count without
|
|
* resuming the device.
|
|
*/
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_get_noresume(dev);
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_set_autosuspend_delay(dev, 5000);
|
|
pm_runtime_use_autosuspend(dev);
|
|
|
|
/* This needs the pm runtime to be registered. */
|
|
ret = imx477_init_controls(imx477);
|
|
if (ret)
|
|
goto error_power_off;
|
|
|
|
/* Initialize subdev */
|
|
imx477->sd.internal_ops = &imx477_internal_ops;
|
|
imx477->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
|
|
V4L2_SUBDEV_FL_HAS_EVENTS;
|
|
imx477->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
|
|
/* Initialize source pads */
|
|
imx477->pad[IMAGE_PAD].flags = MEDIA_PAD_FL_SOURCE;
|
|
imx477->pad[METADATA_PAD].flags = MEDIA_PAD_FL_SOURCE;
|
|
|
|
ret = media_entity_pads_init(&imx477->sd.entity, NUM_PADS, imx477->pad);
|
|
if (ret) {
|
|
dev_err(dev, "failed to init entity pads: %d\n", ret);
|
|
goto error_handler_free;
|
|
}
|
|
|
|
ret = v4l2_async_register_subdev_sensor(&imx477->sd);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to register sensor sub-device: %d\n", ret);
|
|
goto error_media_entity;
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(&client->dev);
|
|
pm_runtime_put_autosuspend(&client->dev);
|
|
|
|
return 0;
|
|
|
|
error_media_entity:
|
|
media_entity_cleanup(&imx477->sd.entity);
|
|
|
|
error_handler_free:
|
|
imx477_free_controls(imx477);
|
|
|
|
error_power_off:
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_put_noidle(&client->dev);
|
|
imx477_power_off(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void imx477_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx477 *imx477 = to_imx477(sd);
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
media_entity_cleanup(&sd->entity);
|
|
imx477_free_controls(imx477);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
if (!pm_runtime_status_suspended(&client->dev))
|
|
imx477_power_off(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(of, imx477_dt_ids);
|
|
|
|
static const struct dev_pm_ops imx477_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(imx477_suspend, imx477_resume)
|
|
SET_RUNTIME_PM_OPS(imx477_power_off, imx477_power_on, NULL)
|
|
};
|
|
|
|
static struct i2c_driver imx477_i2c_driver = {
|
|
.driver = {
|
|
.name = "imx477",
|
|
.of_match_table = imx477_dt_ids,
|
|
.pm = &imx477_pm_ops,
|
|
},
|
|
.probe = imx477_probe,
|
|
.remove = imx477_remove,
|
|
};
|
|
|
|
module_i2c_driver(imx477_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Naushir Patuck <naush@raspberrypi.com>");
|
|
MODULE_DESCRIPTION("Sony IMX477 sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|