Files
linux/arch/riscv/kernel/sys_riscv.c
Andrew Jones 777c0d761b RISC-V: hwprobe: Always use u64 for extension bits
Extensions are getting added quickly and their hwprobe bits will soon
exceed 31 (which pair values accommodate, since they're of type u64).
However, in one tree, where a bunch of extensions got merged prior to
zicboz, zicboz already got pushed to bit 32. Pushing it exposed a
32-bit compilation bug, since unsigned long was used instead of u64.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310311801.hxduISrr-lkp@intel.com/
Fixes: 9c7646d5ff ("RISC-V: hwprobe: Expose Zicboz extension and its block size")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231101141908.192198-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-12-06 05:28:08 -08:00

362 lines
8.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Regents of the University of California
* Copyright (C) 2014 Darius Rad <darius@bluespec.com>
* Copyright (C) 2017 SiFive
*/
#include <linux/syscalls.h>
#include <asm/cacheflush.h>
#include <asm/cpufeature.h>
#include <asm/hwprobe.h>
#include <asm/sbi.h>
#include <asm/vector.h>
#include <asm/switch_to.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm-generic/mman-common.h>
#include <vdso/vsyscall.h>
static long riscv_sys_mmap(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
unsigned long fd, off_t offset,
unsigned long page_shift_offset)
{
if (unlikely(offset & (~PAGE_MASK >> page_shift_offset)))
return -EINVAL;
return ksys_mmap_pgoff(addr, len, prot, flags, fd,
offset >> (PAGE_SHIFT - page_shift_offset));
}
#ifdef CONFIG_64BIT
SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags,
unsigned long, fd, off_t, offset)
{
return riscv_sys_mmap(addr, len, prot, flags, fd, offset, 0);
}
#endif
#if defined(CONFIG_32BIT) || defined(CONFIG_COMPAT)
SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags,
unsigned long, fd, off_t, offset)
{
/*
* Note that the shift for mmap2 is constant (12),
* regardless of PAGE_SIZE
*/
return riscv_sys_mmap(addr, len, prot, flags, fd, offset, 12);
}
#endif
/*
* Allows the instruction cache to be flushed from userspace. Despite RISC-V
* having a direct 'fence.i' instruction available to userspace (which we
* can't trap!), that's not actually viable when running on Linux because the
* kernel might schedule a process on another hart. There is no way for
* userspace to handle this without invoking the kernel (as it doesn't know the
* thread->hart mappings), so we've defined a RISC-V specific system call to
* flush the instruction cache.
*
* sys_riscv_flush_icache() is defined to flush the instruction cache over an
* address range, with the flush applying to either all threads or just the
* caller. We don't currently do anything with the address range, that's just
* in there for forwards compatibility.
*/
SYSCALL_DEFINE3(riscv_flush_icache, uintptr_t, start, uintptr_t, end,
uintptr_t, flags)
{
/* Check the reserved flags. */
if (unlikely(flags & ~SYS_RISCV_FLUSH_ICACHE_ALL))
return -EINVAL;
flush_icache_mm(current->mm, flags & SYS_RISCV_FLUSH_ICACHE_LOCAL);
return 0;
}
/*
* The hwprobe interface, for allowing userspace to probe to see which features
* are supported by the hardware. See Documentation/arch/riscv/hwprobe.rst for more
* details.
*/
static void hwprobe_arch_id(struct riscv_hwprobe *pair,
const struct cpumask *cpus)
{
u64 id = -1ULL;
bool first = true;
int cpu;
for_each_cpu(cpu, cpus) {
u64 cpu_id;
switch (pair->key) {
case RISCV_HWPROBE_KEY_MVENDORID:
cpu_id = riscv_cached_mvendorid(cpu);
break;
case RISCV_HWPROBE_KEY_MIMPID:
cpu_id = riscv_cached_mimpid(cpu);
break;
case RISCV_HWPROBE_KEY_MARCHID:
cpu_id = riscv_cached_marchid(cpu);
break;
}
if (first) {
id = cpu_id;
first = false;
}
/*
* If there's a mismatch for the given set, return -1 in the
* value.
*/
if (id != cpu_id) {
id = -1ULL;
break;
}
}
pair->value = id;
}
static void hwprobe_isa_ext0(struct riscv_hwprobe *pair,
const struct cpumask *cpus)
{
int cpu;
u64 missing = 0;
pair->value = 0;
if (has_fpu())
pair->value |= RISCV_HWPROBE_IMA_FD;
if (riscv_isa_extension_available(NULL, c))
pair->value |= RISCV_HWPROBE_IMA_C;
if (has_vector())
pair->value |= RISCV_HWPROBE_IMA_V;
/*
* Loop through and record extensions that 1) anyone has, and 2) anyone
* doesn't have.
*/
for_each_cpu(cpu, cpus) {
struct riscv_isainfo *isainfo = &hart_isa[cpu];
#define EXT_KEY(ext) \
do { \
if (__riscv_isa_extension_available(isainfo->isa, RISCV_ISA_EXT_##ext)) \
pair->value |= RISCV_HWPROBE_EXT_##ext; \
else \
missing |= RISCV_HWPROBE_EXT_##ext; \
} while (false)
/*
* Only use EXT_KEY() for extensions which can be exposed to userspace,
* regardless of the kernel's configuration, as no other checks, besides
* presence in the hart_isa bitmap, are made.
*/
EXT_KEY(ZBA);
EXT_KEY(ZBB);
EXT_KEY(ZBS);
EXT_KEY(ZICBOZ);
#undef EXT_KEY
}
/* Now turn off reporting features if any CPU is missing it. */
pair->value &= ~missing;
}
static bool hwprobe_ext0_has(const struct cpumask *cpus, u64 ext)
{
struct riscv_hwprobe pair;
hwprobe_isa_ext0(&pair, cpus);
return (pair.value & ext);
}
static u64 hwprobe_misaligned(const struct cpumask *cpus)
{
int cpu;
u64 perf = -1ULL;
for_each_cpu(cpu, cpus) {
int this_perf = per_cpu(misaligned_access_speed, cpu);
if (perf == -1ULL)
perf = this_perf;
if (perf != this_perf) {
perf = RISCV_HWPROBE_MISALIGNED_UNKNOWN;
break;
}
}
if (perf == -1ULL)
return RISCV_HWPROBE_MISALIGNED_UNKNOWN;
return perf;
}
static void hwprobe_one_pair(struct riscv_hwprobe *pair,
const struct cpumask *cpus)
{
switch (pair->key) {
case RISCV_HWPROBE_KEY_MVENDORID:
case RISCV_HWPROBE_KEY_MARCHID:
case RISCV_HWPROBE_KEY_MIMPID:
hwprobe_arch_id(pair, cpus);
break;
/*
* The kernel already assumes that the base single-letter ISA
* extensions are supported on all harts, and only supports the
* IMA base, so just cheat a bit here and tell that to
* userspace.
*/
case RISCV_HWPROBE_KEY_BASE_BEHAVIOR:
pair->value = RISCV_HWPROBE_BASE_BEHAVIOR_IMA;
break;
case RISCV_HWPROBE_KEY_IMA_EXT_0:
hwprobe_isa_ext0(pair, cpus);
break;
case RISCV_HWPROBE_KEY_CPUPERF_0:
pair->value = hwprobe_misaligned(cpus);
break;
case RISCV_HWPROBE_KEY_ZICBOZ_BLOCK_SIZE:
pair->value = 0;
if (hwprobe_ext0_has(cpus, RISCV_HWPROBE_EXT_ZICBOZ))
pair->value = riscv_cboz_block_size;
break;
/*
* For forward compatibility, unknown keys don't fail the whole
* call, but get their element key set to -1 and value set to 0
* indicating they're unrecognized.
*/
default:
pair->key = -1;
pair->value = 0;
break;
}
}
static int do_riscv_hwprobe(struct riscv_hwprobe __user *pairs,
size_t pair_count, size_t cpu_count,
unsigned long __user *cpus_user,
unsigned int flags)
{
size_t out;
int ret;
cpumask_t cpus;
/* Check the reserved flags. */
if (flags != 0)
return -EINVAL;
/*
* The interface supports taking in a CPU mask, and returns values that
* are consistent across that mask. Allow userspace to specify NULL and
* 0 as a shortcut to all online CPUs.
*/
cpumask_clear(&cpus);
if (!cpu_count && !cpus_user) {
cpumask_copy(&cpus, cpu_online_mask);
} else {
if (cpu_count > cpumask_size())
cpu_count = cpumask_size();
ret = copy_from_user(&cpus, cpus_user, cpu_count);
if (ret)
return -EFAULT;
/*
* Userspace must provide at least one online CPU, without that
* there's no way to define what is supported.
*/
cpumask_and(&cpus, &cpus, cpu_online_mask);
if (cpumask_empty(&cpus))
return -EINVAL;
}
for (out = 0; out < pair_count; out++, pairs++) {
struct riscv_hwprobe pair;
if (get_user(pair.key, &pairs->key))
return -EFAULT;
pair.value = 0;
hwprobe_one_pair(&pair, &cpus);
ret = put_user(pair.key, &pairs->key);
if (ret == 0)
ret = put_user(pair.value, &pairs->value);
if (ret)
return -EFAULT;
}
return 0;
}
#ifdef CONFIG_MMU
static int __init init_hwprobe_vdso_data(void)
{
struct vdso_data *vd = __arch_get_k_vdso_data();
struct arch_vdso_data *avd = &vd->arch_data;
u64 id_bitsmash = 0;
struct riscv_hwprobe pair;
int key;
/*
* Initialize vDSO data with the answers for the "all CPUs" case, to
* save a syscall in the common case.
*/
for (key = 0; key <= RISCV_HWPROBE_MAX_KEY; key++) {
pair.key = key;
hwprobe_one_pair(&pair, cpu_online_mask);
WARN_ON_ONCE(pair.key < 0);
avd->all_cpu_hwprobe_values[key] = pair.value;
/*
* Smash together the vendor, arch, and impl IDs to see if
* they're all 0 or any negative.
*/
if (key <= RISCV_HWPROBE_KEY_MIMPID)
id_bitsmash |= pair.value;
}
/*
* If the arch, vendor, and implementation ID are all the same across
* all harts, then assume all CPUs are the same, and allow the vDSO to
* answer queries for arbitrary masks. However if all values are 0 (not
* populated) or any value returns -1 (varies across CPUs), then the
* vDSO should defer to the kernel for exotic cpu masks.
*/
avd->homogeneous_cpus = id_bitsmash != 0 && id_bitsmash != -1;
return 0;
}
arch_initcall_sync(init_hwprobe_vdso_data);
#endif /* CONFIG_MMU */
SYSCALL_DEFINE5(riscv_hwprobe, struct riscv_hwprobe __user *, pairs,
size_t, pair_count, size_t, cpu_count, unsigned long __user *,
cpus, unsigned int, flags)
{
return do_riscv_hwprobe(pairs, pair_count, cpu_count,
cpus, flags);
}
/* Not defined using SYSCALL_DEFINE0 to avoid error injection */
asmlinkage long __riscv_sys_ni_syscall(const struct pt_regs *__unused)
{
return -ENOSYS;
}