Files
linux/kernel/entry/common.c
Jinjie Ruan a70e9f647f entry: Split generic entry into generic exception and syscall entry
Currently CONFIG_GENERIC_ENTRY enables both the generic exception
entry logic and the generic syscall entry logic, which are otherwise
loosely coupled.

Introduce separate config options for these so that architectures can
select the two independently. This will make it easier for
architectures to migrate to generic entry code.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250213130007.1418890-2-ruanjinjie@huawei.com
Link: https://lore.kernel.org/all/20250624-generic-entry-split-v1-1-53d5ef4f94df@linaro.org

[Linus Walleij: rebase onto v6.16-rc1]
2025-06-30 19:52:55 +02:00

247 lines
6.4 KiB
C

// SPDX-License-Identifier: GPL-2.0
#include <linux/irq-entry-common.h>
#include <linux/resume_user_mode.h>
#include <linux/highmem.h>
#include <linux/jump_label.h>
#include <linux/kmsan.h>
#include <linux/livepatch.h>
#include <linux/tick.h>
/* Workaround to allow gradual conversion of architecture code */
void __weak arch_do_signal_or_restart(struct pt_regs *regs) { }
/**
* exit_to_user_mode_loop - do any pending work before leaving to user space
* @regs: Pointer to pt_regs on entry stack
* @ti_work: TIF work flags as read by the caller
*/
__always_inline unsigned long exit_to_user_mode_loop(struct pt_regs *regs,
unsigned long ti_work)
{
/*
* Before returning to user space ensure that all pending work
* items have been completed.
*/
while (ti_work & EXIT_TO_USER_MODE_WORK) {
local_irq_enable_exit_to_user(ti_work);
if (ti_work & (_TIF_NEED_RESCHED | _TIF_NEED_RESCHED_LAZY))
schedule();
if (ti_work & _TIF_UPROBE)
uprobe_notify_resume(regs);
if (ti_work & _TIF_PATCH_PENDING)
klp_update_patch_state(current);
if (ti_work & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL))
arch_do_signal_or_restart(regs);
if (ti_work & _TIF_NOTIFY_RESUME)
resume_user_mode_work(regs);
/* Architecture specific TIF work */
arch_exit_to_user_mode_work(regs, ti_work);
/*
* Disable interrupts and reevaluate the work flags as they
* might have changed while interrupts and preemption was
* enabled above.
*/
local_irq_disable_exit_to_user();
/* Check if any of the above work has queued a deferred wakeup */
tick_nohz_user_enter_prepare();
ti_work = read_thread_flags();
}
/* Return the latest work state for arch_exit_to_user_mode() */
return ti_work;
}
noinstr void irqentry_enter_from_user_mode(struct pt_regs *regs)
{
enter_from_user_mode(regs);
}
noinstr void irqentry_exit_to_user_mode(struct pt_regs *regs)
{
instrumentation_begin();
exit_to_user_mode_prepare(regs);
instrumentation_end();
exit_to_user_mode();
}
noinstr irqentry_state_t irqentry_enter(struct pt_regs *regs)
{
irqentry_state_t ret = {
.exit_rcu = false,
};
if (user_mode(regs)) {
irqentry_enter_from_user_mode(regs);
return ret;
}
/*
* If this entry hit the idle task invoke ct_irq_enter() whether
* RCU is watching or not.
*
* Interrupts can nest when the first interrupt invokes softirq
* processing on return which enables interrupts.
*
* Scheduler ticks in the idle task can mark quiescent state and
* terminate a grace period, if and only if the timer interrupt is
* not nested into another interrupt.
*
* Checking for rcu_is_watching() here would prevent the nesting
* interrupt to invoke ct_irq_enter(). If that nested interrupt is
* the tick then rcu_flavor_sched_clock_irq() would wrongfully
* assume that it is the first interrupt and eventually claim
* quiescent state and end grace periods prematurely.
*
* Unconditionally invoke ct_irq_enter() so RCU state stays
* consistent.
*
* TINY_RCU does not support EQS, so let the compiler eliminate
* this part when enabled.
*/
if (!IS_ENABLED(CONFIG_TINY_RCU) && is_idle_task(current)) {
/*
* If RCU is not watching then the same careful
* sequence vs. lockdep and tracing is required
* as in irqentry_enter_from_user_mode().
*/
lockdep_hardirqs_off(CALLER_ADDR0);
ct_irq_enter();
instrumentation_begin();
kmsan_unpoison_entry_regs(regs);
trace_hardirqs_off_finish();
instrumentation_end();
ret.exit_rcu = true;
return ret;
}
/*
* If RCU is watching then RCU only wants to check whether it needs
* to restart the tick in NOHZ mode. rcu_irq_enter_check_tick()
* already contains a warning when RCU is not watching, so no point
* in having another one here.
*/
lockdep_hardirqs_off(CALLER_ADDR0);
instrumentation_begin();
kmsan_unpoison_entry_regs(regs);
rcu_irq_enter_check_tick();
trace_hardirqs_off_finish();
instrumentation_end();
return ret;
}
void raw_irqentry_exit_cond_resched(void)
{
if (!preempt_count()) {
/* Sanity check RCU and thread stack */
rcu_irq_exit_check_preempt();
if (IS_ENABLED(CONFIG_DEBUG_ENTRY))
WARN_ON_ONCE(!on_thread_stack());
if (need_resched())
preempt_schedule_irq();
}
}
#ifdef CONFIG_PREEMPT_DYNAMIC
#if defined(CONFIG_HAVE_PREEMPT_DYNAMIC_CALL)
DEFINE_STATIC_CALL(irqentry_exit_cond_resched, raw_irqentry_exit_cond_resched);
#elif defined(CONFIG_HAVE_PREEMPT_DYNAMIC_KEY)
DEFINE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
void dynamic_irqentry_exit_cond_resched(void)
{
if (!static_branch_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
return;
raw_irqentry_exit_cond_resched();
}
#endif
#endif
noinstr void irqentry_exit(struct pt_regs *regs, irqentry_state_t state)
{
lockdep_assert_irqs_disabled();
/* Check whether this returns to user mode */
if (user_mode(regs)) {
irqentry_exit_to_user_mode(regs);
} else if (!regs_irqs_disabled(regs)) {
/*
* If RCU was not watching on entry this needs to be done
* carefully and needs the same ordering of lockdep/tracing
* and RCU as the return to user mode path.
*/
if (state.exit_rcu) {
instrumentation_begin();
/* Tell the tracer that IRET will enable interrupts */
trace_hardirqs_on_prepare();
lockdep_hardirqs_on_prepare();
instrumentation_end();
ct_irq_exit();
lockdep_hardirqs_on(CALLER_ADDR0);
return;
}
instrumentation_begin();
if (IS_ENABLED(CONFIG_PREEMPTION))
irqentry_exit_cond_resched();
/* Covers both tracing and lockdep */
trace_hardirqs_on();
instrumentation_end();
} else {
/*
* IRQ flags state is correct already. Just tell RCU if it
* was not watching on entry.
*/
if (state.exit_rcu)
ct_irq_exit();
}
}
irqentry_state_t noinstr irqentry_nmi_enter(struct pt_regs *regs)
{
irqentry_state_t irq_state;
irq_state.lockdep = lockdep_hardirqs_enabled();
__nmi_enter();
lockdep_hardirqs_off(CALLER_ADDR0);
lockdep_hardirq_enter();
ct_nmi_enter();
instrumentation_begin();
kmsan_unpoison_entry_regs(regs);
trace_hardirqs_off_finish();
ftrace_nmi_enter();
instrumentation_end();
return irq_state;
}
void noinstr irqentry_nmi_exit(struct pt_regs *regs, irqentry_state_t irq_state)
{
instrumentation_begin();
ftrace_nmi_exit();
if (irq_state.lockdep) {
trace_hardirqs_on_prepare();
lockdep_hardirqs_on_prepare();
}
instrumentation_end();
ct_nmi_exit();
lockdep_hardirq_exit();
if (irq_state.lockdep)
lockdep_hardirqs_on(CALLER_ADDR0);
__nmi_exit();
}