raspi/linux
1
0
Fork 1
mirror of https://github.com/raspberrypi/linux.git synced 2025-12-13 13:30:08 +00:00
Code Issues Projects Releases Wiki Activity
Files
b13201da5f81bbe7d901b9822fadd58492f11541
linux/drivers/net/dsa/mt7530.c
Vladimir Oltean 21ade3f9cf net: dsa: introduce preferred_default_local_cpu_port and use on MT7530 
[ Upstream commit b79d7c14f4 ]

Since the introduction of the OF bindings, DSA has always had a policy that
in case multiple CPU ports are present in the device tree, the numerically
smallest one is always chosen.

The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU
ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because
it has higher bandwidth.

The MT7530 driver developers had 3 options:
- to modify DSA when the MT7531 switch support was introduced, such as to
  prefer the better port
- to declare both CPU ports in device trees as CPU ports, and live with the
  sub-optimal performance resulting from not preferring the better port
- to declare just port 6 in the device tree as a CPU port

Of course they chose the path of least resistance (3rd option), kicking the
can down the road. The hardware description in the device tree is supposed
to be stable - developers are not supposed to adopt the strategy of
piecemeal hardware description, where the device tree is updated in
lockstep with the features that the kernel currently supports.

Now, as a result of the fact that they did that, any attempts to modify the
device tree and describe both CPU ports as CPU ports would make DSA change
its default selection from port 6 to 5, effectively resulting in a
performance degradation visible to users with the MT7531BE switch as can be
seen below.

Without preferring port 6:

[ ID][Role] Interval           Transfer     Bitrate         Retr
[  5][TX-C]   0.00-20.00  sec   374 MBytes   157 Mbits/sec  734    sender
[  5][TX-C]   0.00-20.00  sec   373 MBytes   156 Mbits/sec    receiver
[  7][RX-C]   0.00-20.00  sec  1.81 GBytes   778 Mbits/sec    0    sender
[  7][RX-C]   0.00-20.00  sec  1.81 GBytes   777 Mbits/sec    receiver

With preferring port 6:

[ ID][Role] Interval           Transfer     Bitrate         Retr
[  5][TX-C]   0.00-20.00  sec  1.99 GBytes   856 Mbits/sec  273    sender
[  5][TX-C]   0.00-20.00  sec  1.99 GBytes   855 Mbits/sec    receiver
[  7][RX-C]   0.00-20.00  sec  1.72 GBytes   737 Mbits/sec   15    sender
[  7][RX-C]   0.00-20.00  sec  1.71 GBytes   736 Mbits/sec    receiver

Using one port for WAN and the other ports for LAN is a very popular use
case which is what this test emulates.

As such, this change proposes that we retroactively modify stable kernels
(which don't support the modification of the CPU port assignments, so as to
let user space fix the problem and restore the throughput) to keep the
mt7530 driver preferring port 6 even with device trees where the hardware
is more fully described.

Fixes: c288575f78 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-28 11:14:14 +02:00

3427 lines
86 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Mediatek MT7530 DSA Switch driver
* Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
*/
#include <linux/etherdevice.h>
#include <linux/if_bridge.h>
#include <linux/iopoll.h>
#include <linux/mdio.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/of_irq.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/phylink.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <net/dsa.h>
#include "mt7530.h"
static struct mt753x_pcs *pcs_to_mt753x_pcs(struct phylink_pcs *pcs)
{
return container_of(pcs, struct mt753x_pcs, pcs);
}
/* String, offset, and register size in bytes if different from 4 bytes */
static const struct mt7530_mib_desc mt7530_mib[] = {
MIB_DESC(1, 0x00, "TxDrop"),
MIB_DESC(1, 0x04, "TxCrcErr"),
MIB_DESC(1, 0x08, "TxUnicast"),
MIB_DESC(1, 0x0c, "TxMulticast"),
MIB_DESC(1, 0x10, "TxBroadcast"),
MIB_DESC(1, 0x14, "TxCollision"),
MIB_DESC(1, 0x18, "TxSingleCollision"),
MIB_DESC(1, 0x1c, "TxMultipleCollision"),
MIB_DESC(1, 0x20, "TxDeferred"),
MIB_DESC(1, 0x24, "TxLateCollision"),
MIB_DESC(1, 0x28, "TxExcessiveCollistion"),
MIB_DESC(1, 0x2c, "TxPause"),
MIB_DESC(1, 0x30, "TxPktSz64"),
MIB_DESC(1, 0x34, "TxPktSz65To127"),
MIB_DESC(1, 0x38, "TxPktSz128To255"),
MIB_DESC(1, 0x3c, "TxPktSz256To511"),
MIB_DESC(1, 0x40, "TxPktSz512To1023"),
MIB_DESC(1, 0x44, "Tx1024ToMax"),
MIB_DESC(2, 0x48, "TxBytes"),
MIB_DESC(1, 0x60, "RxDrop"),
MIB_DESC(1, 0x64, "RxFiltering"),
MIB_DESC(1, 0x68, "RxUnicast"),
MIB_DESC(1, 0x6c, "RxMulticast"),
MIB_DESC(1, 0x70, "RxBroadcast"),
MIB_DESC(1, 0x74, "RxAlignErr"),
MIB_DESC(1, 0x78, "RxCrcErr"),
MIB_DESC(1, 0x7c, "RxUnderSizeErr"),
MIB_DESC(1, 0x80, "RxFragErr"),
MIB_DESC(1, 0x84, "RxOverSzErr"),
MIB_DESC(1, 0x88, "RxJabberErr"),
MIB_DESC(1, 0x8c, "RxPause"),
MIB_DESC(1, 0x90, "RxPktSz64"),
MIB_DESC(1, 0x94, "RxPktSz65To127"),
MIB_DESC(1, 0x98, "RxPktSz128To255"),
MIB_DESC(1, 0x9c, "RxPktSz256To511"),
MIB_DESC(1, 0xa0, "RxPktSz512To1023"),
MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"),
MIB_DESC(2, 0xa8, "RxBytes"),
MIB_DESC(1, 0xb0, "RxCtrlDrop"),
MIB_DESC(1, 0xb4, "RxIngressDrop"),
MIB_DESC(1, 0xb8, "RxArlDrop"),
};
/* Since phy_device has not yet been created and
* phy_{read,write}_mmd_indirect is not available, we provide our own
* core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers
* to complete this function.
*/
static int
core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
{
struct mii_bus *bus = priv->bus;
int value, ret;
/* Write the desired MMD Devad */
ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
if (ret < 0)
goto err;
/* Read the content of the MMD's selected register */
value = bus->read(bus, 0, MII_MMD_DATA);
return value;
err:
dev_err(&bus->dev, "failed to read mmd register\n");
return ret;
}
static int
core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
int devad, u32 data)
{
struct mii_bus *bus = priv->bus;
int ret;
/* Write the desired MMD Devad */
ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
if (ret < 0)
goto err;
/* Write the data into MMD's selected register */
ret = bus->write(bus, 0, MII_MMD_DATA, data);
err:
if (ret < 0)
dev_err(&bus->dev,
"failed to write mmd register\n");
return ret;
}
static void
core_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
struct mii_bus *bus = priv->bus;
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
mutex_unlock(&bus->mdio_lock);
}
static void
core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
{
struct mii_bus *bus = priv->bus;
u32 val;
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
val &= ~mask;
val |= set;
core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
mutex_unlock(&bus->mdio_lock);
}
static void
core_set(struct mt7530_priv *priv, u32 reg, u32 val)
{
core_rmw(priv, reg, 0, val);
}
static void
core_clear(struct mt7530_priv *priv, u32 reg, u32 val)
{
core_rmw(priv, reg, val, 0);
}
static int
mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
struct mii_bus *bus = priv->bus;
u16 page, r, lo, hi;
int ret;
page = (reg >> 6) & 0x3ff;
r = (reg >> 2) & 0xf;
lo = val & 0xffff;
hi = val >> 16;
/* MT7530 uses 31 as the pseudo port */
ret = bus->write(bus, 0x1f, 0x1f, page);
if (ret < 0)
goto err;
ret = bus->write(bus, 0x1f, r, lo);
if (ret < 0)
goto err;
ret = bus->write(bus, 0x1f, 0x10, hi);
err:
if (ret < 0)
dev_err(&bus->dev,
"failed to write mt7530 register\n");
return ret;
}
static u32
mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
{
struct mii_bus *bus = priv->bus;
u16 page, r, lo, hi;
int ret;
page = (reg >> 6) & 0x3ff;
r = (reg >> 2) & 0xf;
/* MT7530 uses 31 as the pseudo port */
ret = bus->write(bus, 0x1f, 0x1f, page);
if (ret < 0) {
dev_err(&bus->dev,
"failed to read mt7530 register\n");
return ret;
}
lo = bus->read(bus, 0x1f, r);
hi = bus->read(bus, 0x1f, 0x10);
return (hi << 16) | (lo & 0xffff);
}
static void
mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
struct mii_bus *bus = priv->bus;
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
mt7530_mii_write(priv, reg, val);
mutex_unlock(&bus->mdio_lock);
}
static u32
_mt7530_unlocked_read(struct mt7530_dummy_poll *p)
{
return mt7530_mii_read(p->priv, p->reg);
}
static u32
_mt7530_read(struct mt7530_dummy_poll *p)
{
struct mii_bus *bus = p->priv->bus;
u32 val;
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
val = mt7530_mii_read(p->priv, p->reg);
mutex_unlock(&bus->mdio_lock);
return val;
}
static u32
mt7530_read(struct mt7530_priv *priv, u32 reg)
{
struct mt7530_dummy_poll p;
INIT_MT7530_DUMMY_POLL(&p, priv, reg);
return _mt7530_read(&p);
}
static void
mt7530_rmw(struct mt7530_priv *priv, u32 reg,
u32 mask, u32 set)
{
struct mii_bus *bus = priv->bus;
u32 val;
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
val = mt7530_mii_read(priv, reg);
val &= ~mask;
val |= set;
mt7530_mii_write(priv, reg, val);
mutex_unlock(&bus->mdio_lock);
}
static void
mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val)
{
mt7530_rmw(priv, reg, 0, val);
}
static void
mt7530_clear(struct mt7530_priv *priv, u32 reg, u32 val)
{
mt7530_rmw(priv, reg, val, 0);
}
static int
mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
{
u32 val;
int ret;
struct mt7530_dummy_poll p;
/* Set the command operating upon the MAC address entries */
val = ATC_BUSY | ATC_MAT(0) | cmd;
mt7530_write(priv, MT7530_ATC, val);
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC);
ret = readx_poll_timeout(_mt7530_read, &p, val,
!(val & ATC_BUSY), 20, 20000);
if (ret < 0) {
dev_err(priv->dev, "reset timeout\n");
return ret;
}
/* Additional sanity for read command if the specified
* entry is invalid
*/
val = mt7530_read(priv, MT7530_ATC);
if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID))
return -EINVAL;
if (rsp)
*rsp = val;
return 0;
}
static void
mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb)
{
u32 reg[3];
int i;
/* Read from ARL table into an array */
for (i = 0; i < 3; i++) {
reg[i] = mt7530_read(priv, MT7530_TSRA1 + (i * 4));
dev_dbg(priv->dev, "%s(%d) reg[%d]=0x%x\n",
__func__, __LINE__, i, reg[i]);
}
fdb->vid = (reg[1] >> CVID) & CVID_MASK;
fdb->aging = (reg[2] >> AGE_TIMER) & AGE_TIMER_MASK;
fdb->port_mask = (reg[2] >> PORT_MAP) & PORT_MAP_MASK;
fdb->mac[0] = (reg[0] >> MAC_BYTE_0) & MAC_BYTE_MASK;
fdb->mac[1] = (reg[0] >> MAC_BYTE_1) & MAC_BYTE_MASK;
fdb->mac[2] = (reg[0] >> MAC_BYTE_2) & MAC_BYTE_MASK;
fdb->mac[3] = (reg[0] >> MAC_BYTE_3) & MAC_BYTE_MASK;
fdb->mac[4] = (reg[1] >> MAC_BYTE_4) & MAC_BYTE_MASK;
fdb->mac[5] = (reg[1] >> MAC_BYTE_5) & MAC_BYTE_MASK;
fdb->noarp = ((reg[2] >> ENT_STATUS) & ENT_STATUS_MASK) == STATIC_ENT;
}
static void
mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
u8 port_mask, const u8 *mac,
u8 aging, u8 type)
{
u32 reg[3] = { 0 };
int i;
reg[1] |= vid & CVID_MASK;
reg[1] |= ATA2_IVL;
reg[1] |= ATA2_FID(FID_BRIDGED);
reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
/* STATIC_ENT indicate that entry is static wouldn't
* be aged out and STATIC_EMP specified as erasing an
* entry
*/
reg[2] |= (type & ENT_STATUS_MASK) << ENT_STATUS;
reg[1] |= mac[5] << MAC_BYTE_5;
reg[1] |= mac[4] << MAC_BYTE_4;
reg[0] |= mac[3] << MAC_BYTE_3;
reg[0] |= mac[2] << MAC_BYTE_2;
reg[0] |= mac[1] << MAC_BYTE_1;
reg[0] |= mac[0] << MAC_BYTE_0;
/* Write array into the ARL table */
for (i = 0; i < 3; i++)
mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]);
}
/* Set up switch core clock for MT7530 */
static void mt7530_pll_setup(struct mt7530_priv *priv)
{
/* Disable core clock */
core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
/* Disable PLL */
core_write(priv, CORE_GSWPLL_GRP1, 0);
/* Set core clock into 500Mhz */
core_write(priv, CORE_GSWPLL_GRP2,
RG_GSWPLL_POSDIV_500M(1) |
RG_GSWPLL_FBKDIV_500M(25));
/* Enable PLL */
core_write(priv, CORE_GSWPLL_GRP1,
RG_GSWPLL_EN_PRE |
RG_GSWPLL_POSDIV_200M(2) |
RG_GSWPLL_FBKDIV_200M(32));
udelay(20);
/* Enable core clock */
core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
}
/* If port 6 is available as a CPU port, always prefer that as the default,
* otherwise don't care.
*/
static struct dsa_port *
mt753x_preferred_default_local_cpu_port(struct dsa_switch *ds)
{
struct dsa_port *cpu_dp = dsa_to_port(ds, 6);
if (dsa_port_is_cpu(cpu_dp))
return cpu_dp;
return NULL;
}
/* Setup port 6 interface mode and TRGMII TX circuit */
static int
mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
{
struct mt7530_priv *priv = ds->priv;
u32 ncpo1, ssc_delta, trgint, xtal;
xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
if (xtal == HWTRAP_XTAL_20MHZ) {
dev_err(priv->dev,
"%s: MT7530 with a 20MHz XTAL is not supported!\n",
__func__);
return -EINVAL;
}
switch (interface) {
case PHY_INTERFACE_MODE_RGMII:
trgint = 0;
break;
case PHY_INTERFACE_MODE_TRGMII:
trgint = 1;
if (xtal == HWTRAP_XTAL_25MHZ)
ssc_delta = 0x57;
else
ssc_delta = 0x87;
if (priv->id == ID_MT7621) {
/* PLL frequency: 125MHz: 1.0GBit */
if (xtal == HWTRAP_XTAL_40MHZ)
ncpo1 = 0x0640;
if (xtal == HWTRAP_XTAL_25MHZ)
ncpo1 = 0x0a00;
} else { /* PLL frequency: 250MHz: 2.0Gbit */
if (xtal == HWTRAP_XTAL_40MHZ)
ncpo1 = 0x0c80;
if (xtal == HWTRAP_XTAL_25MHZ)
ncpo1 = 0x1400;
}
break;
default:
dev_err(priv->dev, "xMII interface %d not supported\n",
interface);
return -EINVAL;
}
mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
P6_INTF_MODE(trgint));
if (trgint) {
/* Disable the MT7530 TRGMII clocks */
core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
/* Setup the MT7530 TRGMII Tx Clock */
core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
core_write(priv, CORE_PLL_GROUP4,
RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
RG_SYSPLL_BIAS_LPF_EN);
core_write(priv, CORE_PLL_GROUP2,
RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
RG_SYSPLL_POSDIV(1));
core_write(priv, CORE_PLL_GROUP7,
RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
/* Enable the MT7530 TRGMII clocks */
core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
}
return 0;
}
static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv)
{
u32 val;
val = mt7530_read(priv, MT7531_TOP_SIG_SR);
return (val & PAD_DUAL_SGMII_EN) != 0;
}
static int
mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
{
return 0;
}
static void
mt7531_pll_setup(struct mt7530_priv *priv)
{
u32 top_sig;
u32 hwstrap;
u32 xtal;
u32 val;
if (mt7531_dual_sgmii_supported(priv))
return;
val = mt7530_read(priv, MT7531_CREV);
top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
hwstrap = mt7530_read(priv, MT7531_HWTRAP);
if ((val & CHIP_REV_M) > 0)
xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ :
HWTRAP_XTAL_FSEL_25MHZ;
else
xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK;
/* Step 1 : Disable MT7531 COREPLL */
val = mt7530_read(priv, MT7531_PLLGP_EN);
val &= ~EN_COREPLL;
mt7530_write(priv, MT7531_PLLGP_EN, val);
/* Step 2: switch to XTAL output */
val = mt7530_read(priv, MT7531_PLLGP_EN);
val |= SW_CLKSW;
mt7530_write(priv, MT7531_PLLGP_EN, val);
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val &= ~RG_COREPLL_EN;
mt7530_write(priv, MT7531_PLLGP_CR0, val);
/* Step 3: disable PLLGP and enable program PLLGP */
val = mt7530_read(priv, MT7531_PLLGP_EN);
val |= SW_PLLGP;
mt7530_write(priv, MT7531_PLLGP_EN, val);
/* Step 4: program COREPLL output frequency to 500MHz */
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val &= ~RG_COREPLL_POSDIV_M;
val |= 2 << RG_COREPLL_POSDIV_S;
mt7530_write(priv, MT7531_PLLGP_CR0, val);
usleep_range(25, 35);
switch (xtal) {
case HWTRAP_XTAL_FSEL_25MHZ:
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val &= ~RG_COREPLL_SDM_PCW_M;
val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
mt7530_write(priv, MT7531_PLLGP_CR0, val);
break;
case HWTRAP_XTAL_FSEL_40MHZ:
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val &= ~RG_COREPLL_SDM_PCW_M;
val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
mt7530_write(priv, MT7531_PLLGP_CR0, val);
break;
}
/* Set feedback divide ratio update signal to high */
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val |= RG_COREPLL_SDM_PCW_CHG;
mt7530_write(priv, MT7531_PLLGP_CR0, val);
/* Wait for at least 16 XTAL clocks */
usleep_range(10, 20);
/* Step 5: set feedback divide ratio update signal to low */
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val &= ~RG_COREPLL_SDM_PCW_CHG;
mt7530_write(priv, MT7531_PLLGP_CR0, val);
/* Enable 325M clock for SGMII */
mt7530_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000);
/* Enable 250SSC clock for RGMII */
mt7530_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000);
/* Step 6: Enable MT7531 PLL */
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val |= RG_COREPLL_EN;
mt7530_write(priv, MT7531_PLLGP_CR0, val);
val = mt7530_read(priv, MT7531_PLLGP_EN);
val |= EN_COREPLL;
mt7530_write(priv, MT7531_PLLGP_EN, val);
usleep_range(25, 35);
}
static void
mt7530_mib_reset(struct dsa_switch *ds)
{
struct mt7530_priv *priv = ds->priv;
mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_FLUSH);
mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
}
static int mt7530_phy_read_c22(struct mt7530_priv *priv, int port, int regnum)
{
return mdiobus_read_nested(priv->bus, port, regnum);
}
static int mt7530_phy_write_c22(struct mt7530_priv *priv, int port, int regnum,
u16 val)
{
return mdiobus_write_nested(priv->bus, port, regnum, val);
}
static int mt7530_phy_read_c45(struct mt7530_priv *priv, int port,
int devad, int regnum)
{
return mdiobus_c45_read_nested(priv->bus, port, devad, regnum);
}
static int mt7530_phy_write_c45(struct mt7530_priv *priv, int port, int devad,
int regnum, u16 val)
{
return mdiobus_c45_write_nested(priv->bus, port, devad, regnum, val);
}
static int
mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
int regnum)
{
struct mii_bus *bus = priv->bus;
struct mt7530_dummy_poll p;
u32 reg, val;
int ret;
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
goto out;
}
reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad) | regnum;
mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
goto out;
}
reg = MT7531_MDIO_CL45_READ | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad);
mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
goto out;
}
ret = val & MT7531_MDIO_RW_DATA_MASK;
out:
mutex_unlock(&bus->mdio_lock);
return ret;
}
static int
mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
int regnum, u16 data)
{
struct mii_bus *bus = priv->bus;
struct mt7530_dummy_poll p;
u32 val, reg;
int ret;
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
goto out;
}
reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad) | regnum;
mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
goto out;
}
reg = MT7531_MDIO_CL45_WRITE | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad) | data;
mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
goto out;
}
out:
mutex_unlock(&bus->mdio_lock);
return ret;
}
static int
mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
{
struct mii_bus *bus = priv->bus;
struct mt7530_dummy_poll p;
int ret;
u32 val;
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
goto out;
}
val = MT7531_MDIO_CL22_READ | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_REG_ADDR(regnum);
mt7530_mii_write(priv, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
goto out;
}
ret = val & MT7531_MDIO_RW_DATA_MASK;
out:
mutex_unlock(&bus->mdio_lock);
return ret;
}
static int
mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
u16 data)
{
struct mii_bus *bus = priv->bus;
struct mt7530_dummy_poll p;
int ret;
u32 reg;
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
!(reg & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
goto out;
}
reg = MT7531_MDIO_CL22_WRITE | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_REG_ADDR(regnum) | data;
mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
!(reg & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
goto out;
}
out:
mutex_unlock(&bus->mdio_lock);
return ret;
}
static int
mt753x_phy_read_c22(struct mii_bus *bus, int port, int regnum)
{
struct mt7530_priv *priv = bus->priv;
return priv->info->phy_read_c22(priv, port, regnum);
}
static int
mt753x_phy_read_c45(struct mii_bus *bus, int port, int devad, int regnum)
{
struct mt7530_priv *priv = bus->priv;
return priv->info->phy_read_c45(priv, port, devad, regnum);
}
static int
mt753x_phy_write_c22(struct mii_bus *bus, int port, int regnum, u16 val)
{
struct mt7530_priv *priv = bus->priv;
return priv->info->phy_write_c22(priv, port, regnum, val);
}
static int
mt753x_phy_write_c45(struct mii_bus *bus, int port, int devad, int regnum,
u16 val)
{
struct mt7530_priv *priv = bus->priv;
return priv->info->phy_write_c45(priv, port, devad, regnum, val);
}
static void
mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset,
uint8_t *data)
{
int i;
if (stringset != ETH_SS_STATS)
return;
for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++)
strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name,
ETH_GSTRING_LEN);
}
static void
mt7530_get_ethtool_stats(struct dsa_switch *ds, int port,
uint64_t *data)
{
struct mt7530_priv *priv = ds->priv;
const struct mt7530_mib_desc *mib;
u32 reg, i;
u64 hi;
for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) {
mib = &mt7530_mib[i];
reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset;
data[i] = mt7530_read(priv, reg);
if (mib->size == 2) {
hi = mt7530_read(priv, reg + 4);
data[i] |= hi << 32;
}
}
}
static int
mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset)
{
if (sset != ETH_SS_STATS)
return 0;
return ARRAY_SIZE(mt7530_mib);
}
static int
mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
{
struct mt7530_priv *priv = ds->priv;
unsigned int secs = msecs / 1000;
unsigned int tmp_age_count;
unsigned int error = -1;
unsigned int age_count;
unsigned int age_unit;
/* Applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds */
if (secs < 1 || secs > (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1))
return -ERANGE;
/* iterate through all possible age_count to find the closest pair */
for (tmp_age_count = 0; tmp_age_count <= AGE_CNT_MAX; ++tmp_age_count) {
unsigned int tmp_age_unit = secs / (tmp_age_count + 1) - 1;
if (tmp_age_unit <= AGE_UNIT_MAX) {
unsigned int tmp_error = secs -
(tmp_age_count + 1) * (tmp_age_unit + 1);
/* found a closer pair */
if (error > tmp_error) {
error = tmp_error;
age_count = tmp_age_count;
age_unit = tmp_age_unit;
}
/* found the exact match, so break the loop */
if (!error)
break;
}
}
mt7530_write(priv, MT7530_AAC, AGE_CNT(age_count) | AGE_UNIT(age_unit));
return 0;
}
static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
{
struct mt7530_priv *priv = ds->priv;
u8 tx_delay = 0;
int val;
mutex_lock(&priv->reg_mutex);
val = mt7530_read(priv, MT7530_MHWTRAP);
val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
switch (priv->p5_intf_sel) {
case P5_INTF_SEL_PHY_P0:
/* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
val |= MHWTRAP_PHY0_SEL;
fallthrough;
case P5_INTF_SEL_PHY_P4:
/* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
/* Setup the MAC by default for the cpu port */
mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
break;
case P5_INTF_SEL_GMAC5:
/* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
val &= ~MHWTRAP_P5_DIS;
break;
case P5_DISABLED:
interface = PHY_INTERFACE_MODE_NA;
break;
default:
dev_err(ds->dev, "Unsupported p5_intf_sel %d\n",
priv->p5_intf_sel);
goto unlock_exit;
}
/* Setup RGMII settings */
if (phy_interface_mode_is_rgmii(interface)) {
val |= MHWTRAP_P5_RGMII_MODE;
/* P5 RGMII RX Clock Control: delay setting for 1000M */
mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);
/* Don't set delay in DSA mode */
if (!dsa_is_dsa_port(priv->ds, 5) &&
(interface == PHY_INTERFACE_MODE_RGMII_TXID ||
interface == PHY_INTERFACE_MODE_RGMII_ID))
tx_delay = 4; /* n * 0.5 ns */
/* P5 RGMII TX Clock Control: delay x */
mt7530_write(priv, MT7530_P5RGMIITXCR,
CSR_RGMII_TXC_CFG(0x10 + tx_delay));
/* reduce P5 RGMII Tx driving, 8mA */
mt7530_write(priv, MT7530_IO_DRV_CR,
P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
}
mt7530_write(priv, MT7530_MHWTRAP, val);
dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
priv->p5_interface = interface;
unlock_exit:
mutex_unlock(&priv->reg_mutex);
}
static void
mt753x_trap_frames(struct mt7530_priv *priv)
{
/* Trap BPDUs to the CPU port(s) */
mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
MT753X_BPDU_CPU_ONLY);
/* Trap LLDP frames with :0E MAC DA to the CPU port(s) */
mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_PORT_FW_MASK,
MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY));
}
static int
mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
{
struct mt7530_priv *priv = ds->priv;
int ret;
/* Setup max capability of CPU port at first */
if (priv->info->cpu_port_config) {
ret = priv->info->cpu_port_config(ds, port);
if (ret)
return ret;
}
/* Enable Mediatek header mode on the cpu port */
mt7530_write(priv, MT7530_PVC_P(port),
PORT_SPEC_TAG);
/* Enable flooding on the CPU port */
mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
UNU_FFP(BIT(port)));
/* Set CPU port number */
if (priv->id == ID_MT7530 || priv->id == ID_MT7621)
mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
/* CPU port gets connected to all user ports of
* the switch.
*/
mt7530_write(priv, MT7530_PCR_P(port),
PCR_MATRIX(dsa_user_ports(priv->ds)));
/* Set to fallback mode for independent VLAN learning */
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
MT7530_PORT_FALLBACK_MODE);
return 0;
}
static int
mt7530_port_enable(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct dsa_port *dp = dsa_to_port(ds, port);
struct mt7530_priv *priv = ds->priv;
mutex_lock(&priv->reg_mutex);
/* Allow the user port gets connected to the cpu port and also
* restore the port matrix if the port is the member of a certain
* bridge.
*/
if (dsa_port_is_user(dp)) {
struct dsa_port *cpu_dp = dp->cpu_dp;
priv->ports[port].pm |= PCR_MATRIX(BIT(cpu_dp->index));
}
priv->ports[port].enable = true;
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
priv->ports[port].pm);
mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
mutex_unlock(&priv->reg_mutex);
return 0;
}
static void
mt7530_port_disable(struct dsa_switch *ds, int port)
{
struct mt7530_priv *priv = ds->priv;
mutex_lock(&priv->reg_mutex);
/* Clear up all port matrix which could be restored in the next
* enablement for the port.
*/
priv->ports[port].enable = false;
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
PCR_MATRIX_CLR);
mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
mutex_unlock(&priv->reg_mutex);
}
static int
mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
{
struct mt7530_priv *priv = ds->priv;
struct mii_bus *bus = priv->bus;
int length;
u32 val;
/* When a new MTU is set, DSA always set the CPU port's MTU to the
* largest MTU of the slave ports. Because the switch only has a global
* RX length register, only allowing CPU port here is enough.
*/
if (!dsa_is_cpu_port(ds, port))
return 0;
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
val = mt7530_mii_read(priv, MT7530_GMACCR);
val &= ~MAX_RX_PKT_LEN_MASK;
/* RX length also includes Ethernet header, MTK tag, and FCS length */
length = new_mtu + ETH_HLEN + MTK_HDR_LEN + ETH_FCS_LEN;
if (length <= 1522) {
val |= MAX_RX_PKT_LEN_1522;
} else if (length <= 1536) {
val |= MAX_RX_PKT_LEN_1536;
} else if (length <= 1552) {
val |= MAX_RX_PKT_LEN_1552;
} else {
val &= ~MAX_RX_JUMBO_MASK;
val |= MAX_RX_JUMBO(DIV_ROUND_UP(length, 1024));
val |= MAX_RX_PKT_LEN_JUMBO;
}
mt7530_mii_write(priv, MT7530_GMACCR, val);
mutex_unlock(&bus->mdio_lock);
return 0;
}
static int
mt7530_port_max_mtu(struct dsa_switch *ds, int port)
{
return MT7530_MAX_MTU;
}
static void
mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
{
struct mt7530_priv *priv = ds->priv;
u32 stp_state;
switch (state) {
case BR_STATE_DISABLED:
stp_state = MT7530_STP_DISABLED;
break;
case BR_STATE_BLOCKING:
stp_state = MT7530_STP_BLOCKING;
break;
case BR_STATE_LISTENING:
stp_state = MT7530_STP_LISTENING;
break;
case BR_STATE_LEARNING:
stp_state = MT7530_STP_LEARNING;
break;
case BR_STATE_FORWARDING:
default:
stp_state = MT7530_STP_FORWARDING;
break;
}
mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK(FID_BRIDGED),
FID_PST(FID_BRIDGED, stp_state));
}
static int
mt7530_port_pre_bridge_flags(struct dsa_switch *ds, int port,
struct switchdev_brport_flags flags,
struct netlink_ext_ack *extack)
{
if (flags.mask & ~(BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD |
BR_BCAST_FLOOD))
return -EINVAL;
return 0;
}
static int
mt7530_port_bridge_flags(struct dsa_switch *ds, int port,
struct switchdev_brport_flags flags,
struct netlink_ext_ack *extack)
{
struct mt7530_priv *priv = ds->priv;
if (flags.mask & BR_LEARNING)
mt7530_rmw(priv, MT7530_PSC_P(port), SA_DIS,
flags.val & BR_LEARNING ? 0 : SA_DIS);
if (flags.mask & BR_FLOOD)
mt7530_rmw(priv, MT7530_MFC, UNU_FFP(BIT(port)),
flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0);
if (flags.mask & BR_MCAST_FLOOD)
mt7530_rmw(priv, MT7530_MFC, UNM_FFP(BIT(port)),
flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0);
if (flags.mask & BR_BCAST_FLOOD)
mt7530_rmw(priv, MT7530_MFC, BC_FFP(BIT(port)),
flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0);
return 0;
}
static int
mt7530_port_bridge_join(struct dsa_switch *ds, int port,
struct dsa_bridge bridge, bool *tx_fwd_offload,
struct netlink_ext_ack *extack)
{
struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
struct dsa_port *cpu_dp = dp->cpu_dp;
u32 port_bitmap = BIT(cpu_dp->index);
struct mt7530_priv *priv = ds->priv;
mutex_lock(&priv->reg_mutex);
dsa_switch_for_each_user_port(other_dp, ds) {
int other_port = other_dp->index;
if (dp == other_dp)
continue;
/* Add this port to the port matrix of the other ports in the
* same bridge. If the port is disabled, port matrix is kept
* and not being setup until the port becomes enabled.
*/
if (!dsa_port_offloads_bridge(other_dp, &bridge))
continue;
if (priv->ports[other_port].enable)
mt7530_set(priv, MT7530_PCR_P(other_port),
PCR_MATRIX(BIT(port)));
priv->ports[other_port].pm |= PCR_MATRIX(BIT(port));
port_bitmap |= BIT(other_port);
}
/* Add the all other ports to this port matrix. */
if (priv->ports[port].enable)
mt7530_rmw(priv, MT7530_PCR_P(port),
PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap));
priv->ports[port].pm |= PCR_MATRIX(port_bitmap);
/* Set to fallback mode for independent VLAN learning */
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
MT7530_PORT_FALLBACK_MODE);
mutex_unlock(&priv->reg_mutex);
return 0;
}
static void
mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
{
struct mt7530_priv *priv = ds->priv;
bool all_user_ports_removed = true;
int i;
/* This is called after .port_bridge_leave when leaving a VLAN-aware
* bridge. Don't set standalone ports to fallback mode.
*/
if (dsa_port_bridge_dev_get(dsa_to_port(ds, port)))
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
MT7530_PORT_FALLBACK_MODE);
mt7530_rmw(priv, MT7530_PVC_P(port),
VLAN_ATTR_MASK | PVC_EG_TAG_MASK | ACC_FRM_MASK,
VLAN_ATTR(MT7530_VLAN_TRANSPARENT) |
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT) |
MT7530_VLAN_ACC_ALL);
/* Set PVID to 0 */
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
G0_PORT_VID_DEF);
for (i = 0; i < MT7530_NUM_PORTS; i++) {
if (dsa_is_user_port(ds, i) &&
dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
all_user_ports_removed = false;
break;
}
}
/* CPU port also does the same thing until all user ports belonging to
* the CPU port get out of VLAN filtering mode.
*/
if (all_user_ports_removed) {
struct dsa_port *dp = dsa_to_port(ds, port);
struct dsa_port *cpu_dp = dp->cpu_dp;
mt7530_write(priv, MT7530_PCR_P(cpu_dp->index),
PCR_MATRIX(dsa_user_ports(priv->ds)));
mt7530_write(priv, MT7530_PVC_P(cpu_dp->index), PORT_SPEC_TAG
| PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
}
static void
mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
{
struct mt7530_priv *priv = ds->priv;
/* Trapped into security mode allows packet forwarding through VLAN
* table lookup.
*/
if (dsa_is_user_port(ds, port)) {
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
MT7530_PORT_SECURITY_MODE);
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
G0_PORT_VID(priv->ports[port].pvid));
/* Only accept tagged frames if PVID is not set */
if (!priv->ports[port].pvid)
mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
MT7530_VLAN_ACC_TAGGED);
/* Set the port as a user port which is to be able to recognize
* VID from incoming packets before fetching entry within the
* VLAN table.
*/
mt7530_rmw(priv, MT7530_PVC_P(port),
VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
VLAN_ATTR(MT7530_VLAN_USER) |
PVC_EG_TAG(MT7530_VLAN_EG_DISABLED));
} else {
/* Also set CPU ports to the "user" VLAN port attribute, to
* allow VLAN classification, but keep the EG_TAG attribute as
* "consistent" (i.o.w. don't change its value) for packets
* received by the switch from the CPU, so that tagged packets
* are forwarded to user ports as tagged, and untagged as
* untagged.
*/
mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK,
VLAN_ATTR(MT7530_VLAN_USER));
}
}
static void
mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
struct dsa_bridge bridge)
{
struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
struct dsa_port *cpu_dp = dp->cpu_dp;
struct mt7530_priv *priv = ds->priv;
mutex_lock(&priv->reg_mutex);
dsa_switch_for_each_user_port(other_dp, ds) {
int other_port = other_dp->index;
if (dp == other_dp)
continue;
/* Remove this port from the port matrix of the other ports
* in the same bridge. If the port is disabled, port matrix
* is kept and not being setup until the port becomes enabled.
*/
if (!dsa_port_offloads_bridge(other_dp, &bridge))
continue;
if (priv->ports[other_port].enable)
mt7530_clear(priv, MT7530_PCR_P(other_port),
PCR_MATRIX(BIT(port)));
priv->ports[other_port].pm &= ~PCR_MATRIX(BIT(port));
}
/* Set the cpu port to be the only one in the port matrix of
* this port.
*/
if (priv->ports[port].enable)
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
PCR_MATRIX(BIT(cpu_dp->index)));
priv->ports[port].pm = PCR_MATRIX(BIT(cpu_dp->index));
/* When a port is removed from the bridge, the port would be set up
* back to the default as is at initial boot which is a VLAN-unaware
* port.
*/
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
MT7530_PORT_MATRIX_MODE);
mutex_unlock(&priv->reg_mutex);
}
static int
mt7530_port_fdb_add(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid,
struct dsa_db db)
{
struct mt7530_priv *priv = ds->priv;
int ret;
u8 port_mask = BIT(port);
mutex_lock(&priv->reg_mutex);
mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT);
ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
mutex_unlock(&priv->reg_mutex);
return ret;
}
static int
mt7530_port_fdb_del(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid,
struct dsa_db db)
{
struct mt7530_priv *priv = ds->priv;
int ret;
u8 port_mask = BIT(port);
mutex_lock(&priv->reg_mutex);
mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_EMP);
ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
mutex_unlock(&priv->reg_mutex);
return ret;
}
static int
mt7530_port_fdb_dump(struct dsa_switch *ds, int port,
dsa_fdb_dump_cb_t *cb, void *data)
{
struct mt7530_priv *priv = ds->priv;
struct mt7530_fdb _fdb = { 0 };
int cnt = MT7530_NUM_FDB_RECORDS;
int ret = 0;
u32 rsp = 0;
mutex_lock(&priv->reg_mutex);
ret = mt7530_fdb_cmd(priv, MT7530_FDB_START, &rsp);
if (ret < 0)
goto err;
do {
if (rsp & ATC_SRCH_HIT) {
mt7530_fdb_read(priv, &_fdb);
if (_fdb.port_mask & BIT(port)) {
ret = cb(_fdb.mac, _fdb.vid, _fdb.noarp,
data);
if (ret < 0)
break;
}
}
} while (--cnt &&
!(rsp & ATC_SRCH_END) &&
!mt7530_fdb_cmd(priv, MT7530_FDB_NEXT, &rsp));
err:
mutex_unlock(&priv->reg_mutex);
return 0;
}
static int
mt7530_port_mdb_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_mdb *mdb,
struct dsa_db db)
{
struct mt7530_priv *priv = ds->priv;
const u8 *addr = mdb->addr;
u16 vid = mdb->vid;
u8 port_mask = 0;
int ret;
mutex_lock(&priv->reg_mutex);
mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP);
if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL))
port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP)
& PORT_MAP_MASK;
port_mask |= BIT(port);
mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT);
ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
mutex_unlock(&priv->reg_mutex);
return ret;
}
static int
mt7530_port_mdb_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_mdb *mdb,
struct dsa_db db)
{
struct mt7530_priv *priv = ds->priv;
const u8 *addr = mdb->addr;
u16 vid = mdb->vid;
u8 port_mask = 0;
int ret;
mutex_lock(&priv->reg_mutex);
mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP);
if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL))
port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP)
& PORT_MAP_MASK;
port_mask &= ~BIT(port);
mt7530_fdb_write(priv, vid, port_mask, addr, -1,
port_mask ? STATIC_ENT : STATIC_EMP);
ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
mutex_unlock(&priv->reg_mutex);
return ret;
}
static int
mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
{
struct mt7530_dummy_poll p;
u32 val;
int ret;
val = VTCR_BUSY | VTCR_FUNC(cmd) | vid;
mt7530_write(priv, MT7530_VTCR, val);
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR);
ret = readx_poll_timeout(_mt7530_read, &p, val,
!(val & VTCR_BUSY), 20, 20000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
return ret;
}
val = mt7530_read(priv, MT7530_VTCR);
if (val & VTCR_INVALID) {
dev_err(priv->dev, "read VTCR invalid\n");
return -EINVAL;
}
return 0;
}
static int
mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
struct netlink_ext_ack *extack)
{
struct dsa_port *dp = dsa_to_port(ds, port);
struct dsa_port *cpu_dp = dp->cpu_dp;
if (vlan_filtering) {
/* The port is being kept as VLAN-unaware port when bridge is
* set up with vlan_filtering not being set, Otherwise, the
* port and the corresponding CPU port is required the setup
* for becoming a VLAN-aware port.
*/
mt7530_port_set_vlan_aware(ds, port);
mt7530_port_set_vlan_aware(ds, cpu_dp->index);
} else {
mt7530_port_set_vlan_unaware(ds, port);
}
return 0;
}
static void
mt7530_hw_vlan_add(struct mt7530_priv *priv,
struct mt7530_hw_vlan_entry *entry)
{
struct dsa_port *dp = dsa_to_port(priv->ds, entry->port);
u8 new_members;
u32 val;
new_members = entry->old_members | BIT(entry->port);
/* Validate the entry with independent learning, create egress tag per
* VLAN and joining the port as one of the port members.
*/
val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | FID(FID_BRIDGED) |
VLAN_VALID;
mt7530_write(priv, MT7530_VAWD1, val);
/* Decide whether adding tag or not for those outgoing packets from the
* port inside the VLAN.
* CPU port is always taken as a tagged port for serving more than one
* VLANs across and also being applied with egress type stack mode for
* that VLAN tags would be appended after hardware special tag used as
* DSA tag.
*/
if (dsa_port_is_cpu(dp))
val = MT7530_VLAN_EGRESS_STACK;
else if (entry->untagged)
val = MT7530_VLAN_EGRESS_UNTAG;
else
val = MT7530_VLAN_EGRESS_TAG;
mt7530_rmw(priv, MT7530_VAWD2,
ETAG_CTRL_P_MASK(entry->port),
ETAG_CTRL_P(entry->port, val));
}
static void
mt7530_hw_vlan_del(struct mt7530_priv *priv,
struct mt7530_hw_vlan_entry *entry)
{
u8 new_members;
u32 val;
new_members = entry->old_members & ~BIT(entry->port);
val = mt7530_read(priv, MT7530_VAWD1);
if (!(val & VLAN_VALID)) {
dev_err(priv->dev,
"Cannot be deleted due to invalid entry\n");
return;
}
if (new_members) {
val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) |
VLAN_VALID;
mt7530_write(priv, MT7530_VAWD1, val);
} else {
mt7530_write(priv, MT7530_VAWD1, 0);
mt7530_write(priv, MT7530_VAWD2, 0);
}
}
static void
mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid,
struct mt7530_hw_vlan_entry *entry,
mt7530_vlan_op vlan_op)
{
u32 val;
/* Fetch entry */
mt7530_vlan_cmd(priv, MT7530_VTCR_RD_VID, vid);
val = mt7530_read(priv, MT7530_VAWD1);
entry->old_members = (val >> PORT_MEM_SHFT) & PORT_MEM_MASK;
/* Manipulate entry */
vlan_op(priv, entry);
/* Flush result to hardware */
mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, vid);
}
static int
mt7530_setup_vlan0(struct mt7530_priv *priv)
{
u32 val;
/* Validate the entry with independent learning, keep the original
* ingress tag attribute.
*/
val = IVL_MAC | EG_CON | PORT_MEM(MT7530_ALL_MEMBERS) | FID(FID_BRIDGED) |
VLAN_VALID;
mt7530_write(priv, MT7530_VAWD1, val);
return mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, 0);
}
static int
mt7530_port_vlan_add(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct netlink_ext_ack *extack)
{
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
struct mt7530_hw_vlan_entry new_entry;
struct mt7530_priv *priv = ds->priv;
mutex_lock(&priv->reg_mutex);
mt7530_hw_vlan_entry_init(&new_entry, port, untagged);
mt7530_hw_vlan_update(priv, vlan->vid, &new_entry, mt7530_hw_vlan_add);
if (pvid) {
priv->ports[port].pvid = vlan->vid;
/* Accept all frames if PVID is set */
mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
MT7530_VLAN_ACC_ALL);
/* Only configure PVID if VLAN filtering is enabled */
if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
mt7530_rmw(priv, MT7530_PPBV1_P(port),
G0_PORT_VID_MASK,
G0_PORT_VID(vlan->vid));
} else if (vlan->vid && priv->ports[port].pvid == vlan->vid) {
/* This VLAN is overwritten without PVID, so unset it */
priv->ports[port].pvid = G0_PORT_VID_DEF;
/* Only accept tagged frames if the port is VLAN-aware */
if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
MT7530_VLAN_ACC_TAGGED);
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
G0_PORT_VID_DEF);
}
mutex_unlock(&priv->reg_mutex);
return 0;
}
static int
mt7530_port_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
struct mt7530_hw_vlan_entry target_entry;
struct mt7530_priv *priv = ds->priv;
mutex_lock(&priv->reg_mutex);
mt7530_hw_vlan_entry_init(&target_entry, port, 0);
mt7530_hw_vlan_update(priv, vlan->vid, &target_entry,
mt7530_hw_vlan_del);
/* PVID is being restored to the default whenever the PVID port
* is being removed from the VLAN.
*/
if (priv->ports[port].pvid == vlan->vid) {
priv->ports[port].pvid = G0_PORT_VID_DEF;
/* Only accept tagged frames if the port is VLAN-aware */
if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
MT7530_VLAN_ACC_TAGGED);
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
G0_PORT_VID_DEF);
}
mutex_unlock(&priv->reg_mutex);
return 0;
}
static int mt753x_mirror_port_get(unsigned int id, u32 val)
{
return (id == ID_MT7531) ? MT7531_MIRROR_PORT_GET(val) :
MIRROR_PORT(val);
}
static int mt753x_mirror_port_set(unsigned int id, u32 val)
{
return (id == ID_MT7531) ? MT7531_MIRROR_PORT_SET(val) :
MIRROR_PORT(val);
}
static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror,
bool ingress, struct netlink_ext_ack *extack)
{
struct mt7530_priv *priv = ds->priv;
int monitor_port;
u32 val;
/* Check for existent entry */
if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
return -EEXIST;
val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
/* MT7530 only supports one monitor port */
monitor_port = mt753x_mirror_port_get(priv->id, val);
if (val & MT753X_MIRROR_EN(priv->id) &&
monitor_port != mirror->to_local_port)
return -EEXIST;
val |= MT753X_MIRROR_EN(priv->id);
val &= ~MT753X_MIRROR_MASK(priv->id);
val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port);
mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
val = mt7530_read(priv, MT7530_PCR_P(port));
if (ingress) {
val |= PORT_RX_MIR;
priv->mirror_rx |= BIT(port);
} else {
val |= PORT_TX_MIR;
priv->mirror_tx |= BIT(port);
}
mt7530_write(priv, MT7530_PCR_P(port), val);
return 0;
}
static void mt753x_port_mirror_del(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror)
{
struct mt7530_priv *priv = ds->priv;
u32 val;
val = mt7530_read(priv, MT7530_PCR_P(port));
if (mirror->ingress) {
val &= ~PORT_RX_MIR;
priv->mirror_rx &= ~BIT(port);
} else {
val &= ~PORT_TX_MIR;
priv->mirror_tx &= ~BIT(port);
}
mt7530_write(priv, MT7530_PCR_P(port), val);
if (!priv->mirror_rx && !priv->mirror_tx) {
val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
val &= ~MT753X_MIRROR_EN(priv->id);
mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
}
}
static enum dsa_tag_protocol
mtk_get_tag_protocol(struct dsa_switch *ds, int port,
enum dsa_tag_protocol mp)
{
return DSA_TAG_PROTO_MTK;
}
#ifdef CONFIG_GPIOLIB
static inline u32
mt7530_gpio_to_bit(unsigned int offset)
{
/* Map GPIO offset to register bit
* [ 2: 0] port 0 LED 0..2 as GPIO 0..2
* [ 6: 4] port 1 LED 0..2 as GPIO 3..5
* [10: 8] port 2 LED 0..2 as GPIO 6..8
* [14:12] port 3 LED 0..2 as GPIO 9..11
* [18:16] port 4 LED 0..2 as GPIO 12..14
*/
return BIT(offset + offset / 3);
}
static int
mt7530_gpio_get(struct gpio_chip *gc, unsigned int offset)
{
struct mt7530_priv *priv = gpiochip_get_data(gc);
u32 bit = mt7530_gpio_to_bit(offset);
return !!(mt7530_read(priv, MT7530_LED_GPIO_DATA) & bit);
}
static void
mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
{
struct mt7530_priv *priv = gpiochip_get_data(gc);
u32 bit = mt7530_gpio_to_bit(offset);
if (value)
mt7530_set(priv, MT7530_LED_GPIO_DATA, bit);
else
mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit);
}
static int
mt7530_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
{
struct mt7530_priv *priv = gpiochip_get_data(gc);
u32 bit = mt7530_gpio_to_bit(offset);
return (mt7530_read(priv, MT7530_LED_GPIO_DIR) & bit) ?
GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
}
static int
mt7530_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
{
struct mt7530_priv *priv = gpiochip_get_data(gc);
u32 bit = mt7530_gpio_to_bit(offset);
mt7530_clear(priv, MT7530_LED_GPIO_OE, bit);
mt7530_clear(priv, MT7530_LED_GPIO_DIR, bit);
return 0;
}
static int
mt7530_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
{
struct mt7530_priv *priv = gpiochip_get_data(gc);
u32 bit = mt7530_gpio_to_bit(offset);
mt7530_set(priv, MT7530_LED_GPIO_DIR, bit);
if (value)
mt7530_set(priv, MT7530_LED_GPIO_DATA, bit);
else
mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit);
mt7530_set(priv, MT7530_LED_GPIO_OE, bit);
return 0;
}
static int
mt7530_setup_gpio(struct mt7530_priv *priv)
{
struct device *dev = priv->dev;
struct gpio_chip *gc;
gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
if (!gc)
return -ENOMEM;
mt7530_write(priv, MT7530_LED_GPIO_OE, 0);
mt7530_write(priv, MT7530_LED_GPIO_DIR, 0);
mt7530_write(priv, MT7530_LED_IO_MODE, 0);
gc->label = "mt7530";
gc->parent = dev;
gc->owner = THIS_MODULE;
gc->get_direction = mt7530_gpio_get_direction;
gc->direction_input = mt7530_gpio_direction_input;
gc->direction_output = mt7530_gpio_direction_output;
gc->get = mt7530_gpio_get;
gc->set = mt7530_gpio_set;
gc->base = -1;
gc->ngpio = 15;
gc->can_sleep = true;
return devm_gpiochip_add_data(dev, gc, priv);
}
#endif /* CONFIG_GPIOLIB */
static irqreturn_t
mt7530_irq_thread_fn(int irq, void *dev_id)
{
struct mt7530_priv *priv = dev_id;
bool handled = false;
u32 val;
int p;
mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
val = mt7530_mii_read(priv, MT7530_SYS_INT_STS);
mt7530_mii_write(priv, MT7530_SYS_INT_STS, val);
mutex_unlock(&priv->bus->mdio_lock);
for (p = 0; p < MT7530_NUM_PHYS; p++) {
if (BIT(p) & val) {
unsigned int irq;
irq = irq_find_mapping(priv->irq_domain, p);
handle_nested_irq(irq);
handled = true;
}
}
return IRQ_RETVAL(handled);
}
static void
mt7530_irq_mask(struct irq_data *d)
{
struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
priv->irq_enable &= ~BIT(d->hwirq);
}
static void
mt7530_irq_unmask(struct irq_data *d)
{
struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
priv->irq_enable |= BIT(d->hwirq);
}
static void
mt7530_irq_bus_lock(struct irq_data *d)
{
struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
}
static void
mt7530_irq_bus_sync_unlock(struct irq_data *d)
{
struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
mutex_unlock(&priv->bus->mdio_lock);
}
static struct irq_chip mt7530_irq_chip = {
.name = KBUILD_MODNAME,
.irq_mask = mt7530_irq_mask,
.irq_unmask = mt7530_irq_unmask,
.irq_bus_lock = mt7530_irq_bus_lock,
.irq_bus_sync_unlock = mt7530_irq_bus_sync_unlock,
};
static int
mt7530_irq_map(struct irq_domain *domain, unsigned int irq,
irq_hw_number_t hwirq)
{
irq_set_chip_data(irq, domain->host_data);
irq_set_chip_and_handler(irq, &mt7530_irq_chip, handle_simple_irq);
irq_set_nested_thread(irq, true);
irq_set_noprobe(irq);
return 0;
}
static const struct irq_domain_ops mt7530_irq_domain_ops = {
.map = mt7530_irq_map,
.xlate = irq_domain_xlate_onecell,
};
static void
mt7530_setup_mdio_irq(struct mt7530_priv *priv)
{
struct dsa_switch *ds = priv->ds;
int p;
for (p = 0; p < MT7530_NUM_PHYS; p++) {
if (BIT(p) & ds->phys_mii_mask) {
unsigned int irq;
irq = irq_create_mapping(priv->irq_domain, p);
ds->slave_mii_bus->irq[p] = irq;
}
}
}
static int
mt7530_setup_irq(struct mt7530_priv *priv)
{
struct device *dev = priv->dev;
struct device_node *np = dev->of_node;
int ret;
if (!of_property_read_bool(np, "interrupt-controller")) {
dev_info(dev, "no interrupt support\n");
return 0;
}
priv->irq = of_irq_get(np, 0);
if (priv->irq <= 0) {
dev_err(dev, "failed to get parent IRQ: %d\n", priv->irq);
return priv->irq ? : -EINVAL;
}
priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
&mt7530_irq_domain_ops, priv);
if (!priv->irq_domain) {
dev_err(dev, "failed to create IRQ domain\n");
return -ENOMEM;
}
/* This register must be set for MT7530 to properly fire interrupts */
if (priv->id != ID_MT7531)
mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL);
ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn,
IRQF_ONESHOT, KBUILD_MODNAME, priv);
if (ret) {
irq_domain_remove(priv->irq_domain);
dev_err(dev, "failed to request IRQ: %d\n", ret);
return ret;
}
return 0;
}
static void
mt7530_free_mdio_irq(struct mt7530_priv *priv)
{
int p;
for (p = 0; p < MT7530_NUM_PHYS; p++) {
if (BIT(p) & priv->ds->phys_mii_mask) {
unsigned int irq;
irq = irq_find_mapping(priv->irq_domain, p);
irq_dispose_mapping(irq);
}
}
}
static void
mt7530_free_irq_common(struct mt7530_priv *priv)
{
free_irq(priv->irq, priv);
irq_domain_remove(priv->irq_domain);
}
static void
mt7530_free_irq(struct mt7530_priv *priv)
{
mt7530_free_mdio_irq(priv);
mt7530_free_irq_common(priv);
}
static int
mt7530_setup_mdio(struct mt7530_priv *priv)
{
struct dsa_switch *ds = priv->ds;
struct device *dev = priv->dev;
struct mii_bus *bus;
static int idx;
int ret;
bus = devm_mdiobus_alloc(dev);
if (!bus)
return -ENOMEM;
ds->slave_mii_bus = bus;
bus->priv = priv;
bus->name = KBUILD_MODNAME "-mii";
snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++);
bus->read = mt753x_phy_read_c22;
bus->write = mt753x_phy_write_c22;
bus->read_c45 = mt753x_phy_read_c45;
bus->write_c45 = mt753x_phy_write_c45;
bus->parent = dev;
bus->phy_mask = ~ds->phys_mii_mask;
if (priv->irq)
mt7530_setup_mdio_irq(priv);
ret = devm_mdiobus_register(dev, bus);
if (ret) {
dev_err(dev, "failed to register MDIO bus: %d\n", ret);
if (priv->irq)
mt7530_free_mdio_irq(priv);
}
return ret;
}
static int
mt7530_setup(struct dsa_switch *ds)
{
struct mt7530_priv *priv = ds->priv;
struct device_node *dn = NULL;
struct device_node *phy_node;
struct device_node *mac_np;
struct mt7530_dummy_poll p;
phy_interface_t interface;
struct dsa_port *cpu_dp;
u32 id, val;
int ret, i;
/* The parent node of master netdev which holds the common system
* controller also is the container for two GMACs nodes representing
* as two netdev instances.
*/
dsa_switch_for_each_cpu_port(cpu_dp, ds) {
dn = cpu_dp->master->dev.of_node->parent;
/* It doesn't matter which CPU port is found first,
* their masters should share the same parent OF node
*/
break;
}
if (!dn) {
dev_err(ds->dev, "parent OF node of DSA master not found");
return -EINVAL;
}
ds->assisted_learning_on_cpu_port = true;
ds->mtu_enforcement_ingress = true;
if (priv->id == ID_MT7530) {
regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
ret = regulator_enable(priv->core_pwr);
if (ret < 0) {
dev_err(priv->dev,
"Failed to enable core power: %d\n", ret);
return ret;
}
regulator_set_voltage(priv->io_pwr, 3300000, 3300000);
ret = regulator_enable(priv->io_pwr);
if (ret < 0) {
dev_err(priv->dev, "Failed to enable io pwr: %d\n",
ret);
return ret;
}
}
/* Reset whole chip through gpio pin or memory-mapped registers for
* different type of hardware
*/
if (priv->mcm) {
reset_control_assert(priv->rstc);
usleep_range(1000, 1100);
reset_control_deassert(priv->rstc);
} else {
gpiod_set_value_cansleep(priv->reset, 0);
usleep_range(1000, 1100);
gpiod_set_value_cansleep(priv->reset, 1);
}
/* Waiting for MT7530 got to stable */
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
20, 1000000);
if (ret < 0) {
dev_err(priv->dev, "reset timeout\n");
return ret;
}
id = mt7530_read(priv, MT7530_CREV);
id >>= CHIP_NAME_SHIFT;
if (id != MT7530_ID) {
dev_err(priv->dev, "chip %x can't be supported\n", id);
return -ENODEV;
}
/* Reset the switch through internal reset */
mt7530_write(priv, MT7530_SYS_CTRL,
SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
SYS_CTRL_REG_RST);
mt7530_pll_setup(priv);
/* Lower Tx driving for TRGMII path */
for (i = 0; i < NUM_TRGMII_CTRL; i++)
mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
TD_DM_DRVP(8) | TD_DM_DRVN(8));
for (i = 0; i < NUM_TRGMII_CTRL; i++)
mt7530_rmw(priv, MT7530_TRGMII_RD(i),
RD_TAP_MASK, RD_TAP(16));
/* Enable port 6 */
val = mt7530_read(priv, MT7530_MHWTRAP);
val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
val |= MHWTRAP_MANUAL;
mt7530_write(priv, MT7530_MHWTRAP, val);
priv->p6_interface = PHY_INTERFACE_MODE_NA;
mt753x_trap_frames(priv);
/* Enable and reset MIB counters */
mt7530_mib_reset(ds);
for (i = 0; i < MT7530_NUM_PORTS; i++) {
/* Disable forwarding by default on all ports */
mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
PCR_MATRIX_CLR);
/* Disable learning by default on all ports */
mt7530_set(priv, MT7530_PSC_P(i), SA_DIS);
if (dsa_is_cpu_port(ds, i)) {
ret = mt753x_cpu_port_enable(ds, i);
if (ret)
return ret;
} else {
mt7530_port_disable(ds, i);
/* Set default PVID to 0 on all user ports */
mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
G0_PORT_VID_DEF);
}
/* Enable consistent egress tag */
mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
/* Setup VLAN ID 0 for VLAN-unaware bridges */
ret = mt7530_setup_vlan0(priv);
if (ret)
return ret;
/* Setup port 5 */
priv->p5_intf_sel = P5_DISABLED;
interface = PHY_INTERFACE_MODE_NA;
if (!dsa_is_unused_port(ds, 5)) {
priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
ret = of_get_phy_mode(dsa_to_port(ds, 5)->dn, &interface);
if (ret && ret != -ENODEV)
return ret;
} else {
/* Scan the ethernet nodes. look for GMAC1, lookup used phy */
for_each_child_of_node(dn, mac_np) {
if (!of_device_is_compatible(mac_np,
"mediatek,eth-mac"))
continue;
ret = of_property_read_u32(mac_np, "reg", &id);
if (ret < 0 || id != 1)
continue;
phy_node = of_parse_phandle(mac_np, "phy-handle", 0);
if (!phy_node)
continue;
if (phy_node->parent == priv->dev->of_node->parent) {
ret = of_get_phy_mode(mac_np, &interface);
if (ret && ret != -ENODEV) {
of_node_put(mac_np);
of_node_put(phy_node);
return ret;
}
id = of_mdio_parse_addr(ds->dev, phy_node);
if (id == 0)
priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
if (id == 4)
priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
}
of_node_put(mac_np);
of_node_put(phy_node);
break;
}
}
#ifdef CONFIG_GPIOLIB
if (of_property_read_bool(priv->dev->of_node, "gpio-controller")) {
ret = mt7530_setup_gpio(priv);
if (ret)
return ret;
}
#endif /* CONFIG_GPIOLIB */
mt7530_setup_port5(ds, interface);
/* Flush the FDB table */
ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
if (ret < 0)
return ret;
return 0;
}
static int
mt7531_setup_common(struct dsa_switch *ds)
{
struct mt7530_priv *priv = ds->priv;
struct dsa_port *cpu_dp;
int ret, i;
/* BPDU to CPU port */
dsa_switch_for_each_cpu_port(cpu_dp, ds) {
mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
BIT(cpu_dp->index));
break;
}
mt753x_trap_frames(priv);
/* Enable and reset MIB counters */
mt7530_mib_reset(ds);
/* Disable flooding on all ports */
mt7530_clear(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK |
UNU_FFP_MASK);
for (i = 0; i < MT7530_NUM_PORTS; i++) {
/* Disable forwarding by default on all ports */
mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
PCR_MATRIX_CLR);
/* Disable learning by default on all ports */
mt7530_set(priv, MT7530_PSC_P(i), SA_DIS);
mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR);
if (dsa_is_cpu_port(ds, i)) {
ret = mt753x_cpu_port_enable(ds, i);
if (ret)
return ret;
} else {
mt7530_port_disable(ds, i);
/* Set default PVID to 0 on all user ports */
mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
G0_PORT_VID_DEF);
}
/* Enable consistent egress tag */
mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
/* Flush the FDB table */
ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
if (ret < 0)
return ret;
return 0;
}
static int
mt7531_setup(struct dsa_switch *ds)
{
struct mt7530_priv *priv = ds->priv;
struct mt7530_dummy_poll p;
u32 val, id;
int ret, i;
/* Reset whole chip through gpio pin or memory-mapped registers for
* different type of hardware
*/
if (priv->mcm) {
reset_control_assert(priv->rstc);
usleep_range(1000, 1100);
reset_control_deassert(priv->rstc);
} else {
gpiod_set_value_cansleep(priv->reset, 0);
usleep_range(1000, 1100);
gpiod_set_value_cansleep(priv->reset, 1);
}
/* Waiting for MT7530 got to stable */
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
20, 1000000);
if (ret < 0) {
dev_err(priv->dev, "reset timeout\n");
return ret;
}
id = mt7530_read(priv, MT7531_CREV);
id >>= CHIP_NAME_SHIFT;
if (id != MT7531_ID) {
dev_err(priv->dev, "chip %x can't be supported\n", id);
return -ENODEV;
}
/* all MACs must be forced link-down before sw reset */
for (i = 0; i < MT7530_NUM_PORTS; i++)
mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
/* Reset the switch through internal reset */
mt7530_write(priv, MT7530_SYS_CTRL,
SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
SYS_CTRL_REG_RST);
mt7531_pll_setup(priv);
if (mt7531_dual_sgmii_supported(priv)) {
priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII;
/* Let ds->slave_mii_bus be able to access external phy. */
mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
MT7531_EXT_P_MDC_11);
mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
MT7531_EXT_P_MDIO_12);
} else {
priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
}
dev_dbg(ds->dev, "P5 support %s interface\n",
p5_intf_modes(priv->p5_intf_sel));
mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
MT7531_GPIO0_INTERRUPT);
/* Let phylink decide the interface later. */
priv->p5_interface = PHY_INTERFACE_MODE_NA;
priv->p6_interface = PHY_INTERFACE_MODE_NA;
/* Enable PHY core PLL, since phy_device has not yet been created
* provided for phy_[read,write]_mmd_indirect is called, we provide
* our own mt7531_ind_mmd_phy_[read,write] to complete this
* function.
*/
val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
MDIO_MMD_VEND2, CORE_PLL_GROUP4);
val |= MT7531_PHY_PLL_BYPASS_MODE;
val &= ~MT7531_PHY_PLL_OFF;
mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
CORE_PLL_GROUP4, val);
mt7531_setup_common(ds);
/* Setup VLAN ID 0 for VLAN-unaware bridges */
ret = mt7530_setup_vlan0(priv);
if (ret)
return ret;
ds->assisted_learning_on_cpu_port = true;
ds->mtu_enforcement_ingress = true;
return 0;
}
static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
switch (port) {
case 0 ... 4: /* Internal phy */
__set_bit(PHY_INTERFACE_MODE_GMII,
config->supported_interfaces);
break;
case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
phy_interface_set_rgmii(config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_MII,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_GMII,
config->supported_interfaces);
break;
case 6: /* 1st cpu port */
__set_bit(PHY_INTERFACE_MODE_RGMII,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_TRGMII,
config->supported_interfaces);
break;
}
}
static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
{
return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
}
static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
struct mt7530_priv *priv = ds->priv;
switch (port) {
case 0 ... 4: /* Internal phy */
__set_bit(PHY_INTERFACE_MODE_GMII,
config->supported_interfaces);
break;
case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
if (mt7531_is_rgmii_port(priv, port)) {
phy_interface_set_rgmii(config->supported_interfaces);
break;
}
fallthrough;
case 6: /* 1st cpu port supports sgmii/8023z only */
__set_bit(PHY_INTERFACE_MODE_SGMII,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_1000BASEX,
config->supported_interfaces);
__set_bit(PHY_INTERFACE_MODE_2500BASEX,
config->supported_interfaces);
config->mac_capabilities |= MAC_2500FD;
break;
}
}
static int
mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
{
struct mt7530_priv *priv = ds->priv;
return priv->info->pad_setup(ds, state->interface);
}
static int
mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
struct mt7530_priv *priv = ds->priv;
/* Only need to setup port5. */
if (port != 5)
return 0;
mt7530_setup_port5(priv->ds, interface);
return 0;
}
static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
phy_interface_t interface,
struct phy_device *phydev)
{
u32 val;
if (!mt7531_is_rgmii_port(priv, port)) {
dev_err(priv->dev, "RGMII mode is not available for port %d\n",
port);
return -EINVAL;
}
val = mt7530_read(priv, MT7531_CLKGEN_CTRL);
val |= GP_CLK_EN;
val &= ~GP_MODE_MASK;
val |= GP_MODE(MT7531_GP_MODE_RGMII);
val &= ~CLK_SKEW_IN_MASK;
val |= CLK_SKEW_IN(MT7531_CLK_SKEW_NO_CHG);
val &= ~CLK_SKEW_OUT_MASK;
val |= CLK_SKEW_OUT(MT7531_CLK_SKEW_NO_CHG);
val |= TXCLK_NO_REVERSE | RXCLK_NO_DELAY;
/* Do not adjust rgmii delay when vendor phy driver presents. */
if (!phydev || phy_driver_is_genphy(phydev)) {
val &= ~(TXCLK_NO_REVERSE | RXCLK_NO_DELAY);
switch (interface) {
case PHY_INTERFACE_MODE_RGMII:
val |= TXCLK_NO_REVERSE;
val |= RXCLK_NO_DELAY;
break;
case PHY_INTERFACE_MODE_RGMII_RXID:
val |= TXCLK_NO_REVERSE;
break;
case PHY_INTERFACE_MODE_RGMII_TXID:
val |= RXCLK_NO_DELAY;
break;
case PHY_INTERFACE_MODE_RGMII_ID:
break;
default:
return -EINVAL;
}
}
mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
return 0;
}
static void mt7531_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface, int speed, int duplex)
{
struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
int port = pcs_to_mt753x_pcs(pcs)->port;
unsigned int val;
/* For adjusting speed and duplex of SGMII force mode. */
if (interface != PHY_INTERFACE_MODE_SGMII ||
phylink_autoneg_inband(mode))
return;
/* SGMII force mode setting */
val = mt7530_read(priv, MT7531_SGMII_MODE(port));
val &= ~MT7531_SGMII_IF_MODE_MASK;
switch (speed) {
case SPEED_10:
val |= MT7531_SGMII_FORCE_SPEED_10;
break;
case SPEED_100:
val |= MT7531_SGMII_FORCE_SPEED_100;
break;
case SPEED_1000:
val |= MT7531_SGMII_FORCE_SPEED_1000;
break;
}
/* MT7531 SGMII 1G force mode can only work in full duplex mode,
* no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not.
*
* The speed check is unnecessary as the MAC capabilities apply
* this restriction. --rmk
*/
if ((speed == SPEED_10 || speed == SPEED_100) &&
duplex != DUPLEX_FULL)
val |= MT7531_SGMII_FORCE_HALF_DUPLEX;
mt7530_write(priv, MT7531_SGMII_MODE(port), val);
}
static bool mt753x_is_mac_port(u32 port)
{
return (port == 5 || port == 6);
}
static int mt7531_sgmii_setup_mode_force(struct mt7530_priv *priv, u32 port,
phy_interface_t interface)
{
u32 val;
if (!mt753x_is_mac_port(port))
return -EINVAL;
mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port),
MT7531_SGMII_PHYA_PWD);
val = mt7530_read(priv, MT7531_PHYA_CTRL_SIGNAL3(port));
val &= ~MT7531_RG_TPHY_SPEED_MASK;
/* Setup 2.5 times faster clock for 2.5Gbps data speeds with 10B/8B
* encoding.
*/
val |= (interface == PHY_INTERFACE_MODE_2500BASEX) ?
MT7531_RG_TPHY_SPEED_3_125G : MT7531_RG_TPHY_SPEED_1_25G;
mt7530_write(priv, MT7531_PHYA_CTRL_SIGNAL3(port), val);
mt7530_clear(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE);
/* MT7531 SGMII 1G and 2.5G force mode can only work in full duplex
* mode, no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not.
*/
mt7530_rmw(priv, MT7531_SGMII_MODE(port),
MT7531_SGMII_IF_MODE_MASK | MT7531_SGMII_REMOTE_FAULT_DIS,
MT7531_SGMII_FORCE_SPEED_1000);
mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0);
return 0;
}
static int mt7531_sgmii_setup_mode_an(struct mt7530_priv *priv, int port,
phy_interface_t interface)
{
if (!mt753x_is_mac_port(port))
return -EINVAL;
mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port),
MT7531_SGMII_PHYA_PWD);
mt7530_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port),
MT7531_RG_TPHY_SPEED_MASK, MT7531_RG_TPHY_SPEED_1_25G);
mt7530_set(priv, MT7531_SGMII_MODE(port),
MT7531_SGMII_REMOTE_FAULT_DIS |
MT7531_SGMII_SPEED_DUPLEX_AN);
mt7530_rmw(priv, MT7531_PCS_SPEED_ABILITY(port),
MT7531_SGMII_TX_CONFIG_MASK, 1);
mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE);
mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_RESTART);
mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0);
return 0;
}
static void mt7531_pcs_an_restart(struct phylink_pcs *pcs)
{
struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
int port = pcs_to_mt753x_pcs(pcs)->port;
u32 val;
/* Only restart AN when AN is enabled */
val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
if (val & MT7531_SGMII_AN_ENABLE) {
val |= MT7531_SGMII_AN_RESTART;
mt7530_write(priv, MT7531_PCS_CONTROL_1(port), val);
}
}
static int
mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
{
struct mt7530_priv *priv = ds->priv;
struct phy_device *phydev;
struct dsa_port *dp;
if (!mt753x_is_mac_port(port)) {
dev_err(priv->dev, "port %d is not a MAC port\n", port);
return -EINVAL;
}
switch (interface) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
dp = dsa_to_port(ds, port);
phydev = dp->slave->phydev;
return mt7531_rgmii_setup(priv, port, interface, phydev);
case PHY_INTERFACE_MODE_SGMII:
return mt7531_sgmii_setup_mode_an(priv, port, interface);
case PHY_INTERFACE_MODE_NA:
case PHY_INTERFACE_MODE_1000BASEX:
case PHY_INTERFACE_MODE_2500BASEX:
return mt7531_sgmii_setup_mode_force(priv, port, interface);
default:
return -EINVAL;
}
return -EINVAL;
}
static int
mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
{
struct mt7530_priv *priv = ds->priv;
return priv->info->mac_port_config(ds, port, mode, state->interface);
}
static struct phylink_pcs *
mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
phy_interface_t interface)
{
struct mt7530_priv *priv = ds->priv;
switch (interface) {
case PHY_INTERFACE_MODE_TRGMII:
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_1000BASEX:
case PHY_INTERFACE_MODE_2500BASEX:
return &priv->pcs[port].pcs;
default:
return NULL;
}
}
static void
mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
const struct phylink_link_state *state)
{
struct mt7530_priv *priv = ds->priv;
u32 mcr_cur, mcr_new;
switch (port) {
case 0 ... 4: /* Internal phy */
if (state->interface != PHY_INTERFACE_MODE_GMII)
goto unsupported;
break;
case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
if (priv->p5_interface == state->interface)
break;
if (mt753x_mac_config(ds, port, mode, state) < 0)
goto unsupported;
if (priv->p5_intf_sel != P5_DISABLED)
priv->p5_interface = state->interface;
break;
case 6: /* 1st cpu port */
if (priv->p6_interface == state->interface)
break;
mt753x_pad_setup(ds, state);
if (mt753x_mac_config(ds, port, mode, state) < 0)
goto unsupported;
priv->p6_interface = state->interface;
break;
default:
unsupported:
dev_err(ds->dev, "%s: unsupported %s port: %i\n",
__func__, phy_modes(state->interface), port);
return;
}
mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
mcr_new = mcr_cur;
mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id);
/* Are we connected to external phy */
if (port == 5 && dsa_is_user_port(ds, 5))
mcr_new |= PMCR_EXT_PHY;
if (mcr_new != mcr_cur)
mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
}
static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface)
{
struct mt7530_priv *priv = ds->priv;
mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
}
static void mt753x_phylink_pcs_link_up(struct phylink_pcs *pcs,
unsigned int mode,
phy_interface_t interface,
int speed, int duplex)
{
if (pcs->ops->pcs_link_up)
pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex);
}
static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
struct phy_device *phydev,
int speed, int duplex,
bool tx_pause, bool rx_pause)
{
struct mt7530_priv *priv = ds->priv;
u32 mcr;
mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
/* MT753x MAC works in 1G full duplex mode for all up-clocked
* variants.
*/
if (interface == PHY_INTERFACE_MODE_TRGMII ||
(phy_interface_mode_is_8023z(interface))) {
speed = SPEED_1000;
duplex = DUPLEX_FULL;
}
switch (speed) {
case SPEED_1000:
mcr |= PMCR_FORCE_SPEED_1000;
break;
case SPEED_100:
mcr |= PMCR_FORCE_SPEED_100;
break;
}
if (duplex == DUPLEX_FULL) {
mcr |= PMCR_FORCE_FDX;
if (tx_pause)
mcr |= PMCR_TX_FC_EN;
if (rx_pause)
mcr |= PMCR_RX_FC_EN;
}
if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
switch (speed) {
case SPEED_1000:
mcr |= PMCR_FORCE_EEE1G;
break;
case SPEED_100:
mcr |= PMCR_FORCE_EEE100;
break;
}
}
mt7530_set(priv, MT7530_PMCR_P(port), mcr);
}
static int
mt7531_cpu_port_config(struct dsa_switch *ds, int port)
{
struct mt7530_priv *priv = ds->priv;
phy_interface_t interface;
int speed;
int ret;
switch (port) {
case 5:
if (mt7531_is_rgmii_port(priv, port))
interface = PHY_INTERFACE_MODE_RGMII;
else
interface = PHY_INTERFACE_MODE_2500BASEX;
priv->p5_interface = interface;
break;
case 6:
interface = PHY_INTERFACE_MODE_2500BASEX;
priv->p6_interface = interface;
break;
default:
return -EINVAL;
}
if (interface == PHY_INTERFACE_MODE_2500BASEX)
speed = SPEED_2500;
else
speed = SPEED_1000;
ret = mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
if (ret)
return ret;
mt7530_write(priv, MT7530_PMCR_P(port),
PMCR_CPU_PORT_SETTING(priv->id));
mt753x_phylink_pcs_link_up(&priv->pcs[port].pcs, MLO_AN_FIXED,
interface, speed, DUPLEX_FULL);
mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
speed, DUPLEX_FULL, true, true);
return 0;
}
static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
struct mt7530_priv *priv = ds->priv;
/* This switch only supports full-duplex at 1Gbps */
config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000FD;
/* This driver does not make use of the speed, duplex, pause or the
* advertisement in its mac_config, so it is safe to mark this driver
* as non-legacy.
*/
config->legacy_pre_march2020 = false;
priv->info->mac_port_get_caps(ds, port, config);
}
static int mt753x_pcs_validate(struct phylink_pcs *pcs,
unsigned long *supported,
const struct phylink_link_state *state)
{
/* Autonegotiation is not supported in TRGMII nor 802.3z modes */
if (state->interface == PHY_INTERFACE_MODE_TRGMII ||
phy_interface_mode_is_8023z(state->interface))
phylink_clear(supported, Autoneg);
return 0;
}
static void mt7530_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
int port = pcs_to_mt753x_pcs(pcs)->port;
u32 pmsr;
pmsr = mt7530_read(priv, MT7530_PMSR_P(port));
state->link = (pmsr & PMSR_LINK);
state->an_complete = state->link;
state->duplex = !!(pmsr & PMSR_DPX);
switch (pmsr & PMSR_SPEED_MASK) {
case PMSR_SPEED_10:
state->speed = SPEED_10;
break;
case PMSR_SPEED_100:
state->speed = SPEED_100;
break;
case PMSR_SPEED_1000:
state->speed = SPEED_1000;
break;
default:
state->speed = SPEED_UNKNOWN;
break;
}
state->pause &= ~(MLO_PAUSE_RX | MLO_PAUSE_TX);
if (pmsr & PMSR_RX_FC)
state->pause |= MLO_PAUSE_RX;
if (pmsr & PMSR_TX_FC)
state->pause |= MLO_PAUSE_TX;
}
static int
mt7531_sgmii_pcs_get_state_an(struct mt7530_priv *priv, int port,
struct phylink_link_state *state)
{
u32 status, val;
u16 config_reg;
status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
state->link = !!(status & MT7531_SGMII_LINK_STATUS);
state->an_complete = !!(status & MT7531_SGMII_AN_COMPLETE);
if (state->interface == PHY_INTERFACE_MODE_SGMII &&
(status & MT7531_SGMII_AN_ENABLE)) {
val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port));
config_reg = val >> 16;
switch (config_reg & LPA_SGMII_SPD_MASK) {
case LPA_SGMII_1000:
state->speed = SPEED_1000;
break;
case LPA_SGMII_100:
state->speed = SPEED_100;
break;
case LPA_SGMII_10:
state->speed = SPEED_10;
break;
default:
dev_err(priv->dev, "invalid sgmii PHY speed\n");
state->link = false;
return -EINVAL;
}
if (config_reg & LPA_SGMII_FULL_DUPLEX)
state->duplex = DUPLEX_FULL;
else
state->duplex = DUPLEX_HALF;
}
return 0;
}
static void
mt7531_sgmii_pcs_get_state_inband(struct mt7530_priv *priv, int port,
struct phylink_link_state *state)
{
unsigned int val;
val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
state->link = !!(val & MT7531_SGMII_LINK_STATUS);
if (!state->link)
return;
state->an_complete = state->link;
if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
state->speed = SPEED_2500;
else
state->speed = SPEED_1000;
state->duplex = DUPLEX_FULL;
state->pause = MLO_PAUSE_NONE;
}
static void mt7531_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
int port = pcs_to_mt753x_pcs(pcs)->port;
if (state->interface == PHY_INTERFACE_MODE_SGMII) {
mt7531_sgmii_pcs_get_state_an(priv, port, state);
return;
} else if ((state->interface == PHY_INTERFACE_MODE_1000BASEX) ||
(state->interface == PHY_INTERFACE_MODE_2500BASEX)) {
mt7531_sgmii_pcs_get_state_inband(priv, port, state);
return;
}
state->link = false;
}
static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface,
const unsigned long *advertising,
bool permit_pause_to_mac)
{
return 0;
}
static void mt7530_pcs_an_restart(struct phylink_pcs *pcs)
{
}
static const struct phylink_pcs_ops mt7530_pcs_ops = {
.pcs_validate = mt753x_pcs_validate,
.pcs_get_state = mt7530_pcs_get_state,
.pcs_config = mt753x_pcs_config,
.pcs_an_restart = mt7530_pcs_an_restart,
};
static const struct phylink_pcs_ops mt7531_pcs_ops = {
.pcs_validate = mt753x_pcs_validate,
.pcs_get_state = mt7531_pcs_get_state,
.pcs_config = mt753x_pcs_config,
.pcs_an_restart = mt7531_pcs_an_restart,
.pcs_link_up = mt7531_pcs_link_up,
};
static int
mt753x_setup(struct dsa_switch *ds)
{
struct mt7530_priv *priv = ds->priv;
int i, ret;
/* Initialise the PCS devices */
for (i = 0; i < priv->ds->num_ports; i++) {
priv->pcs[i].pcs.ops = priv->info->pcs_ops;
priv->pcs[i].priv = priv;
priv->pcs[i].port = i;
if (mt753x_is_mac_port(i))
priv->pcs[i].pcs.poll = 1;
}
ret = priv->info->sw_setup(ds);
if (ret)
return ret;
ret = mt7530_setup_irq(priv);
if (ret)
return ret;
ret = mt7530_setup_mdio(priv);
if (ret && priv->irq)
mt7530_free_irq_common(priv);
return ret;
}
static int mt753x_get_mac_eee(struct dsa_switch *ds, int port,
struct ethtool_eee *e)
{
struct mt7530_priv *priv = ds->priv;
u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
e->tx_lpi_timer = GET_LPI_THRESH(eeecr);
return 0;
}
static int mt753x_set_mac_eee(struct dsa_switch *ds, int port,
struct ethtool_eee *e)
{
struct mt7530_priv *priv = ds->priv;
u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN;
if (e->tx_lpi_timer > 0xFFF)
return -EINVAL;
set = SET_LPI_THRESH(e->tx_lpi_timer);
if (!e->tx_lpi_enabled)
/* Force LPI Mode without a delay */
set |= LPI_MODE_EN;
mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set);
return 0;
}
static const struct dsa_switch_ops mt7530_switch_ops = {
.get_tag_protocol = mtk_get_tag_protocol,
.setup = mt753x_setup,
.preferred_default_local_cpu_port = mt753x_preferred_default_local_cpu_port,
.get_strings = mt7530_get_strings,
.get_ethtool_stats = mt7530_get_ethtool_stats,
.get_sset_count = mt7530_get_sset_count,
.set_ageing_time = mt7530_set_ageing_time,
.port_enable = mt7530_port_enable,
.port_disable = mt7530_port_disable,
.port_change_mtu = mt7530_port_change_mtu,
.port_max_mtu = mt7530_port_max_mtu,
.port_stp_state_set = mt7530_stp_state_set,
.port_pre_bridge_flags = mt7530_port_pre_bridge_flags,
.port_bridge_flags = mt7530_port_bridge_flags,
.port_bridge_join = mt7530_port_bridge_join,
.port_bridge_leave = mt7530_port_bridge_leave,
.port_fdb_add = mt7530_port_fdb_add,
.port_fdb_del = mt7530_port_fdb_del,
.port_fdb_dump = mt7530_port_fdb_dump,
.port_mdb_add = mt7530_port_mdb_add,
.port_mdb_del = mt7530_port_mdb_del,
.port_vlan_filtering = mt7530_port_vlan_filtering,
.port_vlan_add = mt7530_port_vlan_add,
.port_vlan_del = mt7530_port_vlan_del,
.port_mirror_add = mt753x_port_mirror_add,
.port_mirror_del = mt753x_port_mirror_del,
.phylink_get_caps = mt753x_phylink_get_caps,
.phylink_mac_select_pcs = mt753x_phylink_mac_select_pcs,
.phylink_mac_config = mt753x_phylink_mac_config,
.phylink_mac_link_down = mt753x_phylink_mac_link_down,
.phylink_mac_link_up = mt753x_phylink_mac_link_up,
.get_mac_eee = mt753x_get_mac_eee,
.set_mac_eee = mt753x_set_mac_eee,
};
static const struct mt753x_info mt753x_table[] = {
[ID_MT7621] = {
.id = ID_MT7621,
.pcs_ops = &mt7530_pcs_ops,
.sw_setup = mt7530_setup,
.phy_read_c22 = mt7530_phy_read_c22,
.phy_write_c22 = mt7530_phy_write_c22,
.phy_read_c45 = mt7530_phy_read_c45,
.phy_write_c45 = mt7530_phy_write_c45,
.pad_setup = mt7530_pad_clk_setup,
.mac_port_get_caps = mt7530_mac_port_get_caps,
.mac_port_config = mt7530_mac_config,
},
[ID_MT7530] = {
.id = ID_MT7530,
.pcs_ops = &mt7530_pcs_ops,
.sw_setup = mt7530_setup,
.phy_read_c22 = mt7530_phy_read_c22,
.phy_write_c22 = mt7530_phy_write_c22,
.phy_read_c45 = mt7530_phy_read_c45,
.phy_write_c45 = mt7530_phy_write_c45,
.pad_setup = mt7530_pad_clk_setup,
.mac_port_get_caps = mt7530_mac_port_get_caps,
.mac_port_config = mt7530_mac_config,
},
[ID_MT7531] = {
.id = ID_MT7531,
.pcs_ops = &mt7531_pcs_ops,
.sw_setup = mt7531_setup,
.phy_read_c22 = mt7531_ind_c22_phy_read,
.phy_write_c22 = mt7531_ind_c22_phy_write,
.phy_read_c45 = mt7531_ind_c45_phy_read,
.phy_write_c45 = mt7531_ind_c45_phy_write,
.pad_setup = mt7531_pad_setup,
.cpu_port_config = mt7531_cpu_port_config,
.mac_port_get_caps = mt7531_mac_port_get_caps,
.mac_port_config = mt7531_mac_config,
},
};
static const struct of_device_id mt7530_of_match[] = {
{ .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
{ .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
{ .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, mt7530_of_match);
static int
mt7530_probe(struct mdio_device *mdiodev)
{
struct mt7530_priv *priv;
struct device_node *dn;
dn = mdiodev->dev.of_node;
priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
if (!priv->ds)
return -ENOMEM;
priv->ds->dev = &mdiodev->dev;
priv->ds->num_ports = MT7530_NUM_PORTS;
/* Use medatek,mcm property to distinguish hardware type that would
* casues a little bit differences on power-on sequence.
*/
priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
if (priv->mcm) {
dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
if (IS_ERR(priv->rstc)) {
dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
return PTR_ERR(priv->rstc);
}
}
/* Get the hardware identifier from the devicetree node.
* We will need it for some of the clock and regulator setup.
*/
priv->info = of_device_get_match_data(&mdiodev->dev);
if (!priv->info)
return -EINVAL;
/* Sanity check if these required device operations are filled
* properly.
*/
if (!priv->info->sw_setup || !priv->info->pad_setup ||
!priv->info->phy_read_c22 || !priv->info->phy_write_c22 ||
!priv->info->mac_port_get_caps ||
!priv->info->mac_port_config)
return -EINVAL;
priv->id = priv->info->id;
if (priv->id == ID_MT7530) {
priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
if (IS_ERR(priv->core_pwr))
return PTR_ERR(priv->core_pwr);
priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
if (IS_ERR(priv->io_pwr))
return PTR_ERR(priv->io_pwr);
}
/* Not MCM that indicates switch works as the remote standalone
* integrated circuit so the GPIO pin would be used to complete
* the reset, otherwise memory-mapped register accessing used
* through syscon provides in the case of MCM.
*/
if (!priv->mcm) {
priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(priv->reset)) {
dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
return PTR_ERR(priv->reset);
}
}
priv->bus = mdiodev->bus;
priv->dev = &mdiodev->dev;
priv->ds->priv = priv;
priv->ds->ops = &mt7530_switch_ops;
mutex_init(&priv->reg_mutex);
dev_set_drvdata(&mdiodev->dev, priv);
return dsa_register_switch(priv->ds);
}
static void
mt7530_remove(struct mdio_device *mdiodev)
{
struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
int ret = 0;
if (!priv)
return;
ret = regulator_disable(priv->core_pwr);
if (ret < 0)
dev_err(priv->dev,
"Failed to disable core power: %d\n", ret);
ret = regulator_disable(priv->io_pwr);
if (ret < 0)
dev_err(priv->dev, "Failed to disable io pwr: %d\n",
ret);
if (priv->irq)
mt7530_free_irq(priv);
dsa_unregister_switch(priv->ds);
mutex_destroy(&priv->reg_mutex);
}
static void mt7530_shutdown(struct mdio_device *mdiodev)
{
struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
if (!priv)
return;
dsa_switch_shutdown(priv->ds);
dev_set_drvdata(&mdiodev->dev, NULL);
}
static struct mdio_driver mt7530_mdio_driver = {
.probe = mt7530_probe,
.remove = mt7530_remove,
.shutdown = mt7530_shutdown,
.mdiodrv.driver = {
.name = "mt7530",
.of_match_table = mt7530_of_match,
},
};
mdio_module_driver(mt7530_mdio_driver);
MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink