João Paulo Rechi Vita 39f0228a40 Bluetooth: Add new 13d3:3501 QCA_ROME device ...

[ Upstream commit 881cec4f6b ]

Without the QCA ROME setup routine this adapter fails to establish a SCO
connection.

T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3501 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

2019-07-26 09:12:49 +02:00

..

ath3k.c

Bluetooth: ath3k: add more information to error message

2018-09-28 19:27:50 +02:00

bcm203x.c

Bluetooth: mark expected switch fall-throughs

2017-10-14 09:25:51 +02:00

bfusb.c

bluetooth: bfusb: Replace GFP_ATOMIC with GFP_KERNEL in bfusb_send_frame()

2018-07-23 18:05:00 +02:00

bluecard_cs.c

bluetooth: bluecard_cs: Replace GFP_ATOMIC with GFP_KERNEL in bluecard_hci_set_baud_rate()

2018-07-23 18:05:00 +02:00

bpa10x.c

bluetooth: bpa10x: Replace GFP_ATOMIC with GFP_KERNEL in bpa10x_send_frame()

2018-07-23 18:05:00 +02:00

bt3c_cs.c

Bluetooth: bt3c_cs: Fix obsolete function

2018-09-27 12:57:39 +02:00

btbcm.c

Bluetooth: btbcm: Add default address for BCM43341B

2019-05-31 06:43:26 -07:00

btbcm.h

Bluetooth: btbcm: Allow using btbcm_initialize() for reinit

2018-05-18 06:37:51 +02:00

btintel.c

Bluetooth: btintel: Create common function for firmware download

2018-01-25 09:28:40 +01:00

btintel.h

Bluetooth: btintel: Create common function for firmware download

2018-01-25 09:28:40 +01:00

btmrvl_debugfs.c

Bluetooth: btmrvl: Re-use kstrtol_from_user()

2018-05-30 08:16:05 +02:00

btmrvl_drv.h

Bluetooth: btmrvl: Drop unused GPIO includes

2019-01-22 09:51:20 +01:00

btmrvl_main.c

Bluetooth: btmrvl: support sysfs initiated firmware coredump

2018-05-29 15:59:50 +02:00

btmrvl_sdio.c

Bluetooth: btmrvl: add support for sd8977 chipset

2019-01-22 09:51:20 +01:00

btmrvl_sdio.h

btmrvl: add platform specific wakeup interrupt support

2016-05-02 19:26:15 +02:00

btmtkuart.c

Bluetooth: mediatek: Fixed incorrect type in assignment

2019-05-31 06:43:26 -07:00

btqca.c

Bluetooth: hci_qca: Add helper to set device address

2019-01-22 09:51:18 +01:00

btqca.h

Bluetooth: hci_qca: Add helper to set device address

2019-01-22 09:51:18 +01:00

btqcomsmd.c

Bluetooth: btqcomsmd: use HCI_QUIRK_USE_BDADDR_PROPERTY

2019-02-26 10:08:26 +01:00

btrsi.c

Bluetooth: btrsi: fix bt tx timeout issue

2018-09-27 12:53:40 +02:00

btrtl.c

Bluetooth: btrtl: Restore old logic to assume firmware is already loaded

2019-01-28 13:23:59 +01:00

btrtl.h

Bluetooth: btrtl: Add support for a config filename postfix

2018-08-03 13:27:46 +02:00

btsdio.c

Bluetooth: btsdio: Do not bind to non-removable BCM43430

2018-10-14 10:23:47 +02:00

btusb.c

Bluetooth: Add new 13d3:3501 QCA_ROME device

2019-07-26 09:12:49 +02:00

btwilink.c

Bluetooth: Style fix - align block comments

2017-07-22 08:39:39 +02:00

dtl1_cs.c

networking: add and use skb_put_u8()

2017-06-16 11:48:40 -04:00

h4_recv.h

Bluetooth: remove redundant zero check on count

2019-02-18 11:46:45 +01:00

hci_ag6xx.c

Bluetooth: hci_uart: Add diag and address support for Intel/AG6xx

2016-02-29 19:25:22 +02:00

hci_ath.c

Bluetooth: hci_ath: Replace mdelay with msleep in ath_wakeup_ar3k

2018-02-07 09:47:04 +01:00

hci_bcm.c

Bluetooth: hci_bcm: Fix empty regulator supplies for Intel Macs

2019-05-11 07:49:55 +02:00

hci_bcsp.c

Bluetooth: hci_bcsp: Fix memory leak in rx_skb

2019-07-26 09:12:49 +02:00

hci_h4.c

Bluetooth: hci_uart: Check if socket buffer is ERR_PTR in h4_recv_buf()

2019-01-22 09:51:19 +01:00

hci_h5.c

Bluetooth: hci_h5: Turn off RTL8723BS on suspend, reprobe on resume

2018-12-19 00:49:33 +01:00

hci_intel.c

Bluetooth: hci_intel: clean an indentation issue, remove extraneous spaces

2018-12-19 00:46:30 +01:00

hci_ldisc.c

Bluetooth: hci_ldisc: Postpone HCI_UART_PROTO_READY bit set in hci_uart_set_proto()

2019-02-26 09:55:39 +01:00

hci_ll.c

Bluetooth: hci_serdev: Move serdev_device_close/open into common hci_serdev code

2018-05-30 08:47:42 +02:00

hci_mrvl.c

networking: introduce and use skb_put_data()

2017-06-16 11:48:37 -04:00

hci_nokia.c

bluetooth: hci_nokia: Don't include linux/unaligned/le_struct.h directly.

2018-06-17 08:38:55 +09:00

hci_qca.c

Bluetooth: hci_qca: Give enough time to ROME controller to bootup.

2019-05-31 06:43:26 -07:00

hci_serdev.c

Bluetooth: hci_serdev: Remove setting of HCI_QUIRK_RESET_ON_CLOSE.

2018-12-19 00:41:59 +01:00

hci_uart.h

Bluetooth: hci_serdev: Fix HCI_UART_INIT_PENDING not working

2018-05-30 08:49:20 +02:00

hci_vhci.c

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11 14:34:03 -08:00

Kconfig

Bluetooth: btmrvl: add support for sd8977 chipset

2019-01-22 09:51:20 +01:00

Makefile

Bluetooth: mediatek: Add protocol support for MediaTek serial devices

2018-08-07 21:33:25 +02:00