mirror of
https://github.com/raspberrypi/linux.git
synced 2025-12-06 01:49:46 +00:00
45eb038029
[ Upstream commit9f299d3264] To use additional properties 'bluetooth' on serial, need replace false with 'type: object' for 'additionalProperties' to make it as a node, else will run into dtbs_check warnings. 'arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes:af1c2d8169("dt-bindings: serial: Convert STM32 UART to json-schema") Reported-by: kernel test robot <lkp@intel.com> Tested-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1616757302-7889-8-git-send-email-dillon.minfei@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
98 lines
1.6 KiB
YAML
98 lines
1.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/serial/st,stm32-uart.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
maintainers:
|
|
- Erwan Le Ray <erwan.leray@st.com>
|
|
|
|
title: STMicroelectronics STM32 USART bindings
|
|
|
|
allOf:
|
|
- $ref: rs485.yaml
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- st,stm32-uart
|
|
- st,stm32f7-uart
|
|
- st,stm32h7-uart
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
label:
|
|
description: label associated with this uart
|
|
|
|
st,hw-flow-ctrl:
|
|
description: enable hardware flow control (deprecated)
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
|
|
uart-has-rtscts: true
|
|
|
|
dmas:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
dma-names:
|
|
items:
|
|
enum: [ rx, tx ]
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
cts-gpios:
|
|
maxItems: 1
|
|
|
|
rts-gpios:
|
|
maxItems: 1
|
|
|
|
wakeup-source: true
|
|
|
|
rs485-rts-delay: true
|
|
rs485-rts-active-low: true
|
|
linux,rs485-enabled-at-boot-time: true
|
|
rs485-rx-during-tx: true
|
|
|
|
if:
|
|
required:
|
|
- st,hw-flow-ctrl
|
|
then:
|
|
properties:
|
|
cts-gpios: false
|
|
rts-gpios: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
|
|
additionalProperties:
|
|
type: object
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/stm32mp1-clks.h>
|
|
usart1: serial@40011000 {
|
|
compatible = "st,stm32-uart";
|
|
reg = <0x40011000 0x400>;
|
|
interrupts = <37>;
|
|
clocks = <&rcc 0 164>;
|
|
dmas = <&dma2 2 4 0x414 0x0>,
|
|
<&dma2 7 4 0x414 0x0>;
|
|
dma-names = "rx", "tx";
|
|
rs485-rts-active-low;
|
|
};
|
|
|
|
...
|