mirror of
https://github.com/raspberrypi/linux.git
synced 2026-01-03 17:51:52 +00:00
cc75154c2f
make dtbs_check:
arch/arm/boot/dts/renesas/r8a7791-koelsch.dtb: hdmi@39: 'avdd-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
arch/arm/boot/dts/renesas/r8a7791-koelsch.dtb: hdmi@39: 'dvdd-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
arch/arm/boot/dts/renesas/r8a7791-koelsch.dtb: hdmi@39: 'pvdd-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
arch/arm/boot/dts/renesas/r8a7791-koelsch.dtb: hdmi@39: 'dvdd-3v-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
arch/arm/boot/dts/renesas/r8a7791-koelsch.dtb: hdmi@39: 'bgvdd-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
...
Fix this by adding the missing power supply properties, and by adding
fixed regulators where needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6c49fd83d327a68040f052bd9fd96fe25b0fc301.1698068647.git.geert+renesas@glider.be
140 lines
2.2 KiB
Plaintext
140 lines
2.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module
|
|
*
|
|
* Copyright (C) 2017 Renesas Electronics Corp.
|
|
*/
|
|
|
|
/ {
|
|
aliases {
|
|
serial1 = &scif1;
|
|
serial4 = &hscif1;
|
|
};
|
|
|
|
cec_clock: cec-clock {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <12000000>;
|
|
};
|
|
|
|
hdmi-out {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_out: endpoint {
|
|
remote-endpoint = <&adv7511_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "1P8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&can1 {
|
|
pinctrl-0 = <&can1_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&du {
|
|
pinctrl-0 = <&du_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
ports {
|
|
port@0 {
|
|
endpoint {
|
|
remote-endpoint = <&adv7511_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hscif1 {
|
|
pinctrl-0 = <&hscif1_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c5 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
hdmi@39 {
|
|
compatible = "adi,adv7511w";
|
|
reg = <0x39>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&cec_clock>;
|
|
clock-names = "cec";
|
|
|
|
avdd-supply = <®_1p8v>;
|
|
dvdd-supply = <®_1p8v>;
|
|
pvdd-supply = <®_1p8v>;
|
|
dvdd-3v-supply = <®_3p3v>;
|
|
bgvdd-supply = <®_1p8v>;
|
|
|
|
adi,input-depth = <8>;
|
|
adi,input-colorspace = "rgb";
|
|
adi,input-clock = "1x";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
adv7511_in: endpoint {
|
|
remote-endpoint = <&du_out_rgb>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
adv7511_out: endpoint {
|
|
remote-endpoint = <&hdmi_con_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pfc {
|
|
can1_pins: can1 {
|
|
groups = "can1_data_d";
|
|
function = "can1";
|
|
};
|
|
|
|
du_pins: du {
|
|
groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
|
|
function = "du";
|
|
};
|
|
|
|
hscif1_pins: hscif1 {
|
|
groups = "hscif1_data_c", "hscif1_ctrl_c";
|
|
function = "hscif1";
|
|
};
|
|
|
|
scif1_pins: scif1 {
|
|
groups = "scif1_data_d";
|
|
function = "scif1";
|
|
};
|
|
};
|
|
|
|
&scif1 {
|
|
pinctrl-0 = <&scif1_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
status = "okay";
|
|
};
|