gstreamer-plugins-bad: enable wayland for OpenGL in vc4graphics

Signed-off-by: Moorthy Baskar <moorthy.bs@ltts.com>

README

@@ -65,7 +65,7 @@ branch: master
 revision: HEAD
 
 URI: git://git.openembedded.org/meta-openembedded
-layers: meta-oe, meta-multimedia
+layers: meta-oe, meta-multimedia, meta-networking, meta-python
 branch: master
 revision: HEAD
 
@@ -77,8 +77,11 @@ b. Add needed layer to bblayers.conf:
 c. Set MACHINE in local.conf to one of the supported boards:
     - raspberrypi
     - raspberrypi0
+    - raspberrypi0-wifi
     - raspberrypi2
     - raspberrypi3
+    - raspberrypi-cm (dummy alias for raspberrypi)
+    - raspberrypi-cm3 (dummy alias for raspberrypi2)
 d. bitbake rpi-hwup-image
 e. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
 f. Boot your RPI.
@@ -241,11 +244,10 @@ List of currently supported models:
 
 3.O. Enable UART
 ===============
+RaspberryPi 0, 1, 2 and CM will have UART console enabled by default.
 
-RaspberryPi 1, 2 and CM will have UART console enabled by default.
+RaspberryPi 0 WiFi and 3 does not have the UART enabled by default because this
-
+needs a fixed core frequency and enable_uart wil set it to the minimum. Certain
-RaspberryPi 3 does not have the UART enabled by default because this needs a
-fixed core frequency and enable_uart wil set it to the minimum. Certain
 operations - 60fps h264 decode, high quality deinterlace - which aren't
 performed on the ARM may be affected, and we wouldn't want to do that to users
 who don't want to use the serial port. Users who want serial console support on
@@ -318,11 +320,12 @@ Feel free to ask any kind of questions but always prepend your email subject
 with "[meta-raspberrypi]". This is because we use the 'yocto' mailing list and
 not a perticular 'meta-raspberrypi' mailing list.
 
-To contribute to this layer you should send the patches for review to the
+7.B. Patches and pull requests
-above specified mailing list.
+==============================
-The patches should be compliant with the openembedded patch guidelines:
-http://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
 
+To contribute to this project you should send pull requests to the github mirror
+(<https://github.com/agherzan/meta-raspberrypi>). **Additionally** you can send
+the patches for review to the above specified mailing list.
 
 When creating patches, please use something like:
 
@@ -332,7 +335,7 @@ When sending patches to mailing list, please use something like:
 
     git send-email --to yocto@yoctoproject.org <generated patch>
 
-7.B. Github issues
+7.C. Github issues
 ==================
 In order to manage and trace the meta-raspberrypi issues, we use github issues:
     https://github.com/agherzan/meta-raspberrypi/issues

classes/sdcard_image-rpi.bbclass

@@ -35,6 +35,7 @@ KERNEL_INITRAMFS ?= ""
 # Kernel image name
 SDIMG_KERNELIMAGE_raspberrypi  ?= "kernel.img"
 SDIMG_KERNELIMAGE_raspberrypi2 ?= "kernel7.img"
+SDIMG_KERNELIMAGE_raspberrypi3-64 ?= "kernel8.img"
 
 # Boot partition volume id
 BOOTDD_VOLUME_ID ?= "${MACHINE}"

conf/machine/include/rpi-base.inc

@@ -13,12 +13,14 @@ XSERVER = " \
     ${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "xf86-video-modesetting", "xf86-video-fbdev", d)} \
     "
 
-# Really supported starting from linux-raspberrypi 3.18.y only
 KERNEL_DEVICETREE ?= " \
+    bcm2708-rpi-0-w.dtb \
     bcm2708-rpi-b.dtb \
     bcm2708-rpi-b-plus.dtb \
     bcm2709-rpi-2-b.dtb \
     bcm2710-rpi-3-b.dtb \
+    bcm2708-rpi-cm.dtb \
+    bcm2710-rpi-cm3.dtb \
     \
     overlays/hifiberry-amp.dtbo \
     overlays/hifiberry-dac.dtbo \
@@ -40,7 +42,7 @@ KERNEL_DEVICETREE ?= " \
     "
 KERNEL_IMAGETYPE ?= "Image"
 
-MACHINE_FEATURES += "apm usbhost keyboard vfat ext2 screen touchscreen alsa bluetooth wifi sdio"
+MACHINE_FEATURES += "apm usbhost keyboard vfat ext2 screen touchscreen alsa bluetooth wifi sdio ${@bb.utils.contains('DISABLE_VC4GRAPHICS', '1', '', 'vc4graphics', d)}"
 
 # Raspberry Pi has no hardware clock
 MACHINE_FEATURES_BACKFILL_CONSIDERED = "rtc"

conf/machine/raspberrypi-cm.conf

@@ -0,0 +1,6 @@
+#@TYPE: Machine
+#@NAME: RaspberryPi Compute Module (CM1)
+#@DESCRIPTION: Machine configuration for the RaspberryPi Compute Module (CM1)
+
+MACHINEOVERRIDES = "raspberrypi:${MACHINE}"
+include conf/machine/raspberrypi.conf

conf/machine/raspberrypi-cm3.conf

@@ -0,0 +1,6 @@
+#@TYPE: Machine
+#@NAME: RaspberryPi Compute Module 3 (CM3)
+#@DESCRIPTION: Machine configuration for the RaspberryPi Compute Module 3 (CM3)
+
+MACHINEOVERRIDES = "raspberrypi2:${MACHINE}"
+include conf/machine/raspberrypi2.conf

conf/machine/raspberrypi.conf

@@ -7,8 +7,7 @@ DEFAULTTUNE ?= "arm1176jzfshf"
 require conf/machine/include/tune-arm1176jzf-s.inc
 include conf/machine/include/rpi-base.inc
 
-SERIAL_CONSOLE = "115200 ttyAMA0"
+SERIAL_CONSOLE ?= "115200 ttyAMA0"
 
 UBOOT_MACHINE = "rpi_config"
 VC4_CMA_SIZE_raspberrypi ?= "cma-64"
-

conf/machine/raspberrypi0-wifi.conf

@@ -0,0 +1,15 @@
+#@TYPE: Machine
+#@NAME: RaspberryPi Zero WiFi Development Board
+#@DESCRIPTION: Machine configuration for the RaspberryPi Zero  WiFi board (https://www.raspberrypi.org/blog/raspberry-pi-zero-w-joins-family/)
+
+DEFAULTTUNE ?= "arm1176jzfshf"
+require conf/machine/include/tune-arm1176jzf-s.inc
+include conf/machine/include/rpi-base.inc
+
+MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430"
+
+SDIMG_KERNELIMAGE ?= "kernel.img"
+KERNEL_DEFCONFIG ?= "bcmrpi_defconfig"
+UBOOT_MACHINE ?= "rpi_config"
+SERIAL_CONSOLE ?= "115200 ttyS0"
+VC4_CMA_SIZE ?= "cma-128"

conf/machine/raspberrypi0.conf

@@ -7,4 +7,3 @@ include conf/machine/raspberrypi.conf
 
 SERIAL_CONSOLE = "115200 ttyAMA0"
 VC4_CMA_SIZE ?= "cma-128"
-

conf/machine/raspberrypi2.conf

@@ -7,8 +7,7 @@ DEFAULTTUNE ?= "cortexa7thf-neon-vfpv4"
 require conf/machine/include/tune-cortexa7.inc
 include conf/machine/include/rpi-base.inc
 
-SERIAL_CONSOLE = "115200 ttyAMA0"
+SERIAL_CONSOLE ?= "115200 ttyAMA0"
 
 UBOOT_MACHINE = "rpi_2_config"
 VC4_CMA_SIZE ?= "cma-256"
-

conf/machine/raspberrypi3-64.conf

@@ -0,0 +1,41 @@
+#@TYPE: Machine
+#@NAME: RaspberryPi 3 Development Board
+#@DESCRIPTION: Machine configuration for the RaspberryPi 3 in 64 bits mode
+
+MACHINEOVERRIDES = "raspberrypi3:${MACHINE}"
+
+MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430"
+
+# Set this early so it overrides rpi-default-versions.inc
+PREFERRED_VERSION_linux-raspberrypi ?= "4.9.%"
+
+require conf/machine/include/arm/arch-armv8.inc
+include conf/machine/include/rpi-base.inc
+
+KERNEL_DEVICETREE = " \
+    broadcom/bcm2710-rpi-3-b.dtb \
+    broadcom/bcm2837-rpi-3-b.dtb \
+    \
+    overlays/hifiberry-amp.dtbo \
+    overlays/hifiberry-dac.dtbo \
+    overlays/hifiberry-dacplus.dtbo \
+    overlays/hifiberry-digi.dtbo \
+    overlays/i2c-rtc.dtbo \
+    overlays/iqaudio-dac.dtbo \
+    overlays/iqaudio-dacplus.dtbo \
+    overlays/lirc-rpi.dtbo \
+    overlays/pitft22.dtbo \
+    overlays/pitft28-resistive.dtbo \
+    overlays/pps-gpio.dtbo \
+    overlays/rpi-ft5406.dtbo \
+    overlays/w1-gpio.dtbo \
+    overlays/w1-gpio-pullup.dtbo \
+    overlays/pi3-disable-bt.dtbo \
+    overlays/pi3-miniuart-bt.dtbo \
+    overlays/vc4-kms-v3d.dtbo \
+    "
+
+SERIAL_CONSOLE ?= "115200 ttyS0"
+VC4_CMA_SIZE ?= "cma-256"
+
+UBOOT_MACHINE = "rpi_3_config"

conf/machine/raspberrypi3.conf

@@ -2,12 +2,14 @@
 #@NAME: RaspberryPi 3 Development Board
 #@DESCRIPTION: Machine configuration for the RaspberryPi 3
 
-MACHINEOVERRIDES = "raspberrypi2:${MACHINE}"
+DEFAULTTUNE ?= "cortexa7thf-neon-vfpv4"
+require conf/machine/include/tune-cortexa7.inc
+include conf/machine/include/rpi-base.inc
 
 MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430"
 
-include conf/machine/raspberrypi2.conf
+SDIMG_KERNELIMAGE ?= "kernel7.img"
-
+KERNEL_DEFCONFIG ?= "bcm2709_defconfig"
-SERIAL_CONSOLE = "115200 ttyS0"
+UBOOT_MACHINE ?= "rpi_2_config"
+SERIAL_CONSOLE ?= "115200 ttyS0"
 VC4_CMA_SIZE ?= "cma-256"
-

recipes-bsp/bootfiles/rpi-config_git.bb

@@ -112,6 +112,12 @@ do_deploy() {
     fi
 }
 
+do_deploy_append_raspberrypi3-64() {
+    # Device Tree support
+    echo "# Load correct Device Tree for Aarch64" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    echo "device_tree=bcm2710-rpi-3-b.dtb" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+}
+
 addtask deploy before do_package after do_install
 do_deploy[dirs] += "${DEPLOYDIR}/bcm2835-bootfiles"
 

recipes-bsp/common/firmware.inc

@@ -1,10 +1,10 @@
-RPIFW_DATE ?= "20161125"
+RPIFW_DATE ?= "20170405"
 RPIFW_SRC_URI ?= "https://github.com/raspberrypi/firmware/archive/1.${RPIFW_DATE}.tar.gz"
 RPIFW_S ?= "${WORKDIR}/firmware-1.${RPIFW_DATE}"
 
 SRC_URI = "${RPIFW_SRC_URI}"
-SRC_URI[md5sum] = "a9281d2869e2d7673a83d41bacfa66c2"
+SRC_URI[md5sum] = "ea82d14a7cd8cfae9b78e00d4e56bc71"
-SRC_URI[sha256sum] = "744e050630621c70991c91e0ee8663dc2f579e743583ca762b13b00bc75859bc"
+SRC_URI[sha256sum] = "2f4e5bddbac1372590db203002c35cbba3fb9d6172a93c314ee27bf05ae13bff"
 
 PV = "${RPIFW_DATE}"
 

recipes-bsp/u-boot/files/0003-Include-lowlevel_init.o-for-rpi2.patch

@@ -0,0 +1,25 @@
+From 1eb01436bc57ad32519a4567a1c9ec82d52d60a1 Mon Sep 17 00:00:00 2001
+From: Paul Barker <paul@paulbarker.me.uk>
+Date: Tue, 29 Nov 2016 19:47:49 +0000
+Subject: [PATCH] Include lowlevel_init.o for rpi2
+
+Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
+Upstream-status: Inappropriate
+    (not needed upstream as rpi_2 board directory is removed in latest
+    version)
+---
+ board/raspberrypi/rpi_2/Makefile | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/board/raspberrypi/rpi_2/Makefile b/board/raspberrypi/rpi_2/Makefile
+index d82cd21..9f865c5 100644
+--- a/board/raspberrypi/rpi_2/Makefile
++++ b/board/raspberrypi/rpi_2/Makefile
+@@ -5,3 +5,4 @@
+ #
+
+ obj-y	:= ../rpi/rpi.o
++obj-y	+= ../rpi/lowlevel_init.o
+--
+2.1.4
+

recipes-bsp/u-boot/u-boot_%.bbappend

@@ -3,4 +3,5 @@ RDEPENDS_${PN}_append_rpi = " rpi-u-boot-scr"
 SRC_URI_append_rpi = " \
     file://0001-arm-add-save_boot_params-for-ARM1176.patch \
     file://0002-rpi-passthrough-of-the-firmware-provided-FDT-blob.patch \
+    file://0003-Include-lowlevel_init.o-for-rpi2.patch \
     "

recipes-core/udev/udev-rules-rpi.bb

@@ -0,0 +1,12 @@
+DESCRIPTION = "udev rules for Raspberry Pi Boards"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+
+SRC_URI = " file://99-com.rules"
+
+S = "${WORKDIR}"
+
+do_install () {
+    install -d ${D}${sysconfdir}/udev/rules.d
+    install -m 0644 ${WORKDIR}/99-com.rules ${D}${sysconfdir}/udev/rules.d/
+}

recipes-core/udev/udev-rules-rpi/99-com.rules

@@ -0,0 +1,21 @@
+KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\
+	ALIASES=/proc/device-tree/aliases; \
+	if cmp -s $ALIASES/uart0 $ALIASES/serial0; then \
+		echo 0;\
+	elif cmp -s $ALIASES/uart0 $ALIASES/serial1; then \
+		echo 1; \
+	else \
+		exit 1; \
+	fi\
+'", SYMLINK+="serial%c"
+
+KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\
+	ALIASES=/proc/device-tree/aliases; \
+	if cmp -s $ALIASES/uart1 $ALIASES/serial0; then \
+		echo 0; \
+	elif cmp -s $ALIASES/uart1 $ALIASES/serial1; then \
+		echo 1; \
+	else \
+		exit 1; \
+	fi \
+'", SYMLINK+="serial%c"

recipes-graphics/userland/userland_git.bb

@@ -7,10 +7,9 @@ LIC_FILES_CHKSUM = "file://LICENCE;md5=0448d6488ef8cc380632b1569ee6d196"
 
 PR = "r5"
 
-PROVIDES = "virtual/libgles2 \
+PROVIDES = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', 'virtual/libgles2 virtual/egl', d)}"
-            virtual/egl"
 
-RPROVIDES_${PN} += "libgles2 libgl"
+RPROVIDES_${PN} += "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', 'libgles2 egl', d)}"
 
 COMPATIBLE_MACHINE = "raspberrypi"
 
@@ -58,6 +57,14 @@ do_install_append () {
 		sed -i 's/include "vcos_futex_mutex.h"/include "pthreads\/vcos_futex_mutex.h"/g' ${f}
 		sed -i 's/include "vcos_platform_types.h"/include "pthreads\/vcos_platform_types.h"/g' ${f}
 	done
+        if [ "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}" = "1" ]; then
+                rm -rf ${D}${libdir}/libEGL*
+                rm -rf ${D}${libdir}/libGLES*
+                rm -rf ${D}${libdir}/libwayland-*
+                rm -rf ${D}${libdir}/pkgconfig/egl.pc ${D}${libdir}/pkgconfig/glesv2.pc \
+                        ${D}${libdir}/pkgconfig/wayland-egl.pc
+                rm -rf ${D}${includedir}/EGL ${D}${includedir}/GLES* ${D}${includedir}/KHR
+        fi
 }
 
 # Shared libs from userland package  build aren't versioned, so we need
@@ -77,3 +84,4 @@ FILES_${PN}-dbg += "${libdir}/plugins/.debug"
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
 RDEPENDS_${PN} += "bash"
+RDEPENDS_${PN} += "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "libegl-mesa", "", d)}"

recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d/10-evdev.conf

@@ -1,40 +0,0 @@
-#
-# Catch-all evdev loader for udev-based systems
-# We don't simply match on any device since that also adds accelerometers
-# and other devices that we don't really want to use. The list below
-# matches everything but joysticks.
-
-Section "InputClass"
-        Identifier "evdev pointer catchall"
-        MatchIsPointer "on"
-        MatchDevicePath "/dev/input/event*"
-        Driver "evdev"
-EndSection
-
-Section "InputClass"
-        Identifier "evdev keyboard catchall"
-        MatchIsKeyboard "on"
-        MatchDevicePath "/dev/input/event*"
-        Driver "evdev"
-EndSection
-
-Section "InputClass"
-        Identifier "evdev touchpad catchall"
-        MatchIsTouchpad "on"
-        MatchDevicePath "/dev/input/event*"
-        Driver "evdev"
-EndSection
-
-Section "InputClass"
-        Identifier "evdev tablet catchall"
-        MatchIsTablet "on"
-        MatchDevicePath "/dev/input/event*"
-        Driver "evdev"
-EndSection
-
-Section "InputClass"
-        Identifier "evdev touchscreen catchall"
-        MatchIsTouchscreen "on"
-        MatchDevicePath "/dev/input/event*"
-        Driver "evdev"
-EndSection

recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend

@@ -1,16 +1,14 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 
-SRC_URI_append_rpi = " file://xorg.conf.d/10-evdev.conf \
+SRC_URI_append_rpi = " \
     file://xorg.conf.d/98-pitft.conf \
     file://xorg.conf.d/99-calibration.conf \
-                     "
+"
 
 do_install_append_rpi () {
-	install -d ${D}/${sysconfdir}/X11/xorg.conf.d/
-	install -m 0644 ${WORKDIR}/xorg.conf.d/10-evdev.conf ${D}/${sysconfdir}/X11/xorg.conf.d/
-
     PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
     if [ "${PITFT}" = "1" ]; then
+        install -d ${D}/${sysconfdir}/X11/xorg.conf.d/
         install -m 0644 ${WORKDIR}/xorg.conf.d/98-pitft.conf ${D}/${sysconfdir}/X11/xorg.conf.d/
         install -m 0644 ${WORKDIR}/xorg.conf.d/99-calibration.conf ${D}/${sysconfdir}/X11/xorg.conf.d/
     fi

recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend

@@ -7,3 +7,5 @@ PACKAGECONFIG_rpi ?= " \
     ${@bb.utils.contains("DISTRO_FEATURES", "wayland", "xwayland", "", d)} \
     ${@bb.utils.contains("DISTRO_FEATURES", "systemd", "systemd", "", d)} \
 "
+
+XSERVER_RRECOMMENDS_append = " xf86-input-libinput"

recipes-kernel/linux-firmware/files/brcmfmac43430-sdio.txt

@@ -0,0 +1,66 @@
+# NVRAM file for BCM943430WLPTH
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0727
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0727
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=84
+txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x77711111
+propbw202gpo=0xdd
+
+# OFDM IIR :
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+# PAPD mode:
+papdmode=1
+papdvalidtest=1
+pacalidx2g=42
+papdepsoffset=-22
+papdendidx=58
+
+# LTECX flags
+ltecxmux=0
+ltecxpadnum=0x0102
+ltecxfnsel=0x44
+ltecxgcigpio=0x01
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
+muxenab=0x1
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+
+#VCO freq 326.4MHz
+spurconfig=0x3 
+
+edonthd20l=-75
+edoffthd20ul=-80

recipes-kernel/linux-firmware/linux-firmware_%.bbappend

@@ -0,0 +1,12 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+SRC_URI += "file://brcmfmac43430-sdio.txt"
+
+do_install_append() {
+	install -D -m 0644 ${WORKDIR}/brcmfmac43430-sdio.txt ${D}/lib/firmware/brcm/brcmfmac43430-sdio.txt
+}
+
+FILES_${PN}-bcm43430 += " \
+  /lib/firmware/brcm/brcmfmac43430-sdio.txt \
+"
+

recipes-kernel/linux/linux-raspberrypi-4.1/0001-dts-add-overlay-for-pitft22.patch

@@ -1,110 +0,0 @@
-From a28bd410022b32a64e208f04b45add6326990332 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petter=20Mab=C3=A4cker?= <petter@technux.se>
-Date: Fri, 8 Jan 2016 09:02:44 +0100
-Subject: [PATCH] dts: add overlay for pitft22
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Upstream-Status: Pending
-
-Add the pitft22 overlay from adafruit Adafruit-Pi-Kernel-o-Matic repo:
-https://github.com/adafruit/Adafruit-Pi-Kernel-o-Matic
-
-Signed-off-by: Petter Mabäcker <petter@technux.se>
----
- arch/arm/boot/dts/overlays/Makefile            |  1 +
- arch/arm/boot/dts/overlays/pitft22-overlay.dts | 69 ++++++++++++++++++++++++++
- 2 files changed, 70 insertions(+)
- create mode 100755 arch/arm/boot/dts/overlays/pitft22-overlay.dts
-
-diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile
-index 1a60e9c..a2535a2 100644
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -37,6 +37,7 @@ dtb-$(RPI_DT_OVERLAYS) += mmc-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += mz61581-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += piscreen-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += piscreen2r-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += pitft22-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += pitft28-capacitive-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += pitft28-resistive-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += pps-gpio-overlay.dtb
-diff --git a/arch/arm/boot/dts/overlays/pitft22-overlay.dts b/arch/arm/boot/dts/overlays/pitft22-overlay.dts
-new file mode 100755
-index 0000000..894ba22
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/pitft22-overlay.dts
-@@ -0,0 +1,69 @@
-+/*
-+ * Device Tree overlay for pitft by Adafruit
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+        compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+        fragment@0 {
-+                target = <&spi0>;
-+                __overlay__ {
-+                        status = "okay";
-+
-+                        spidev@0{
-+                                status = "disabled";
-+                        };
-+
-+                        spidev@1{
-+                                status = "disabled";
-+                        };
-+                };
-+        };
-+
-+        fragment@1 {
-+                target = <&gpio>;
-+                __overlay__ {
-+                        pitft_pins: pitft_pins {
-+                                brcm,pins = <25>;
-+                                brcm,function = <1>; /* out */
-+                                brcm,pull = <0>; /* none */
-+                        };
-+                };
-+        };
-+
-+        fragment@2 {
-+                target = <&spi0>;
-+                __overlay__ {
-+                        /* needed to avoid dtc warning */
-+                        #address-cells = <1>;
-+                        #size-cells = <0>;
-+
-+                        pitft: pitft@0{
-+                                compatible = "ilitek,ili9340";
-+                                reg = <0>;
-+                                pinctrl-names = "default";
-+                                pinctrl-0 = <&pitft_pins>;
-+
-+                                spi-max-frequency = <32000000>;
-+                                rotate = <90>;
-+                                fps = <25>;
-+                                bgr;
-+                                buswidth = <8>;
-+                                dc-gpios = <&gpio 25 0>;
-+                                debug = <0>;
-+                        };
-+
-+                };
-+        };
-+
-+        __overrides__ {
-+                speed =   <&pitft>,"spi-max-frequency:0";
-+                rotate =  <&pitft>,"rotate:0";
-+                fps =     <&pitft>,"fps:0";
-+                debug =   <&pitft>,"debug:0";
-+        };
-+};
--- 
-1.9.1
-

recipes-kernel/linux/linux-raspberrypi-4.1/0002-vmcs-Remove-unused-sm_cache_map_vector-definition.patch

@@ -1,31 +0,0 @@
-The code using it also ifdef'ed with 0, anyyd gcc 6
-complains
-
-error: 'sm_cache_map_vector' defined but not used
-
-The code using it also ifdef'ed out
-
-Upstream-status: Denied [https://github.com/raspberrypi/linux/pull/1528]
-
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
----
- drivers/char/broadcom/vc_sm/vmcs_sm.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/char/broadcom/vc_sm/vmcs_sm.c
-+++ b/drivers/char/broadcom/vc_sm/vmcs_sm.c
-@@ -197,12 +197,14 @@ struct SM_STATE_T {
- static struct SM_STATE_T *sm_state;
- static int sm_inited;
- 
-+#if 0
- static const char *const sm_cache_map_vector[] = {
- 	"(null)",
- 	"host",
- 	"videocore",
- 	"host+videocore",
- };
-+#endif
- 
- /* ---- Private Function Prototypes -------------------------------------- */
- 

recipes-kernel/linux/linux-raspberrypi-4.1/0003-fix-gcc6.patch

@@ -1,78 +0,0 @@
-Fix compile with GCC6
-
-Upstream-status: Denied [https://github.com/raspberrypi/linux/pull/1528]
-
-Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
-
-Index: source/include/linux/compiler-gcc6.h
-===================================================================
---- /dev/null
-+++ source/include/linux/compiler-gcc6.h
-@@ -0,0 +1,67 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used				__attribute__((__used__))
-+#define __must_check			__attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+   to them will be unlikely.  This means a lot of manual unlikely()s
-+   are unnecessary now for any paths leading to the usual suspects
-+   like BUG(), printk(), panic() etc. [but let's keep them for now for
-+   older compilers]
-+
-+   Early snapshots of gcc 4.3 don't support this and we can't detect this
-+   in the preprocessor, but we can live with this because they're unreleased.
-+   Maketime probing would be overkill here.
-+
-+   gcc also has a __attribute__((__hot__)) to move hot functions into
-+   a special section, but I don't see any sense in this right now in
-+   the kernel context */
-+#define __cold			__attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable.  This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased.  Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone	__attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
-+
-+#define KASAN_ABI_VERSION 4

recipes-kernel/linux/linux-raspberrypi-4.7/0001-fix-dtbo-rules.patch

@@ -1,44 +0,0 @@
-From 13c8784da3dbd977f64cec740eba775b6fab11c2 Mon Sep 17 00:00:00 2001
-From: Herve Jourdain <herve.jourdain@neuf.fr>
-Date: Fri, 20 May 2016 16:02:23 +0800
-Subject: [yocto][meta-raspberrypi][PATCH v4 4/5] linux-raspberrypi_4.4.inc:
- support for .dtbo files for dtb overlays
-
-Upstream-Status: Pending
-
-Kernel 4.4.6+ on RaspberryPi support .dtbo files for overlays, instead of .dtb.
-Patch the kernel, which has faulty rules to generate .dtbo the way yocto does
-
-Signed-off-by: Herve Jourdain <herve.jourdain@neuf.fr>
----
- .../0001-fix-dtbo-rules.patch                      | 27 ++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
- create mode 100644 recipes-kernel/linux/linux-raspberrypi-4.4/0001-fix-dtbo-rules.patch
-
-diff --git a/arch/arm/Makefile b/arch/arm/Makefile
-index a2e7cf7..673c1cb 100644
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -333,6 +333,8 @@ $(INSTALL_TARGETS):
- 
- %.dtb: | scripts
- 	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
-+%.dtbo: | scripts
-+	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
- 
- PHONY += dtbs dtbs_install
- 
-diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
-index 3079c4f..6cc3766 100644
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -293,7 +293,8 @@ $(obj)/%.dtb: $(src)/%.dts FORCE
- 	$(call if_changed_dep,dtc)
- 
- quiet_cmd_dtco = DTCO    $@
--cmd_dtco = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
-+cmd_dtco = mkdir -p $(dir ${dtc-tmp}) ; \
-+	$(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
- 	$(objtree)/scripts/dtc/dtc -@ -H epapr -O dtb -o $@ -b 0 \
- 		-i $(dir $<) $(DTC_FLAGS) \
- 		-d $(depfile).dtc.tmp $(dtc-tmp) ; \

recipes-kernel/linux/linux-raspberrypi.inc

@@ -18,6 +18,7 @@ PV = "${LINUX_VERSION}+git${SRCPV}"
 # NOTE: For now we pull in the default config from the RPi kernel GIT tree.
 KERNEL_DEFCONFIG_raspberrypi ?= "bcmrpi_defconfig"
 KERNEL_DEFCONFIG_raspberrypi2 ?= "bcm2709_defconfig"
+KERNEL_DEFCONFIG_raspberrypi3-64 ?= "bcmrpi3_defconfig"
 
 # CMDLINE for raspberrypi
 CMDLINE = "dwc_otg.lpm_enable=0 console=serial0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"

recipes-kernel/linux/linux-raspberrypi_4.1.bb

@@ -1,12 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
-
-LINUX_VERSION ?= "4.1.21"
-
-SRCREV = "ff45bc0e8917c77461b2901e2743e6339bb70413"
-SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.1.y \
-           file://0001-dts-add-overlay-for-pitft22.patch \
-           file://0002-vmcs-Remove-unused-sm_cache_map_vector-definition.patch \
-           file://0003-fix-gcc6.patch \
-          "
-
-require linux-raspberrypi.inc

recipes-kernel/linux/linux-raspberrypi_4.4.bb

@@ -1,9 +1,10 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
 
-LINUX_VERSION ?= "4.4.35"
+LINUX_VERSION ?= "4.4.50"
 
-SRCREV = "5d765c8b5782de7ed49f623c107f1b395429b560"
+SRCREV = "04c8e47067d4873c584395e5cb260b4f170a99ea"
 SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.4.y \
            file://0001-fix-dtbo-rules.patch \
 "
+
 require linux-raspberrypi.inc

recipes-kernel/linux/linux-raspberrypi_4.7.bb

@@ -1,9 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
-
-LINUX_VERSION ?= "4.7.7"
-
-SRCREV = "a45a35c08598b23f9fd82e49c83b46c7d536244f"
-SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.7.y \
-           file://0001-fix-dtbo-rules.patch \
-"
-require linux-raspberrypi.inc

recipes-kernel/linux/linux-raspberrypi_4.8.bb

@@ -1,8 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
-
-LINUX_VERSION ?= "4.8.16"
-
-SRCREV = "061dccce6cf6705bbb5da29a643f4b0ad1d11630"
-SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.8.y \
-"
-require linux-raspberrypi.inc

recipes-kernel/linux/linux-raspberrypi_4.9.bb

@@ -1,8 +1,13 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
 
-LINUX_VERSION ?= "4.9.2"
+LINUX_VERSION ?= "4.9.27"
 
-SRCREV = "4052b0da7dbab0df22ca8733cf50b3e573e221e0"
+SRCREV = "9a5f215eda12bad29b35040dff00d0346fe517e2"
 SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.9.y \
 "
 require linux-raspberrypi.inc
+
+# A LOADADDR is needed when building a uImage format kernel. This value is not
+# set by default in rpi-4.8.y and later branches so we need to provide it
+# manually. This value unused if KERNEL_IMAGETYPE is not uImage.
+KERNEL_EXTRA_ARGS += "LOADADDR=0x00008000"

recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_%.bbappend

@@ -3,7 +3,9 @@ EXTRA_OECONF_append_rpi = " CPPFLAGS='-I${STAGING_INCDIR}/interface/vcos/pthread
 
 # if using bcm driver enable dispmanx not when using VC4 driver
 
-PACKAGECONFIG_append_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', ' dispmanx', d)}"
+PACKAGECONFIG_append_rpi = " ${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', \
+                                    bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d), \
+                                    'dispmanx', d)}"
 
 PACKAGECONFIG_GL_rpi = "egl gles2"