psplash: Raise alternatives priority to 200

Alternatives priority of psplash in poky is now 100,
so we need something higher (fixes #381).

Signed-off-by: Gianluigi Tiesi <sherpya@netfarm.it>

README.md

@@ -10,10 +10,11 @@ Yocto BSP layer for the Raspberry Pi boards - <http://www.raspberrypi.org/>.
 ## Quick links
 
 * Git repository web frontend:
-  <http://git.yoctoproject.org/cgit/cgit.cgi/meta-raspberrypi/>
+  <https://github.com/agherzan/meta-raspberrypi>
 * Mailing list (yocto mailing list): <yocto@yoctoproject.org>
 * Issues management (Github Issues):
   <https://github.com/agherzan/meta-raspberrypi/issues>
+* Documentation: <http://meta-raspberrypi.readthedocs.io/en/latest/>
 
 ## Description
 
@@ -46,7 +47,7 @@ This layer depends on:
 1. source poky/oe-init-build-env rpi-build
 2. Add this layer to bblayers.conf and the dependencies above
 3. Set MACHINE in local.conf to one of the supported boards
-4. bitbake rpi-hwup-image
+4. bitbake core-image-base
 5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
 6. Boot your RPI.
 

classes/linux-raspberrypi-base.bbclass

@@ -1,29 +0,0 @@
-inherit linux-kernel-base
-
-def get_dts(d, ver=None):
-    import re
-
-    staging_dir = d.getVar("STAGING_KERNEL_BUILDDIR")
-    dts = d.getVar("KERNEL_DEVICETREE")
-
-    # d.getVar() might return 'None' as a normal string
-    # leading to 'is None' check isn't enough.
-    # TODO: Investigate if this is a bug in bitbake
-    if ver is None or ver == "None":
-        ''' if 'ver' isn't set try to grab the kernel version
-        from the kernel staging '''
-        ver = get_kernelversion_file(staging_dir)
-
-    return dts
-
-
-def split_overlays(d, out, ver=None):
-    dts = get_dts(d, ver)
-    if out:
-        overlays = oe.utils.str_filter_out('\S+\-overlay\.dtb$', dts, d)
-        overlays = oe.utils.str_filter_out('\S+\.dtbo$', overlays, d)
-    else:
-        overlays = oe.utils.str_filter('\S+\-overlay\.dtb$', dts, d) + \
-                   " " + oe.utils.str_filter('\S+\.dtbo$', dts, d)
-
-    return overlays

classes/sdcard_image-rpi.bbclass

@@ -1,8 +1,7 @@
 inherit image_types
-inherit linux-raspberrypi-base
 
 #
-# Create an image that can by written onto a SD card using dd.
+# Create an image that can be written onto a SD card using dd.
 #
 # The disk layout used is:
 #
@@ -29,9 +28,6 @@ IMAGE_TYPEDEP_rpi-sdimg = "${SDIMG_ROOTFS_TYPE}"
 # Set kernel and boot loader
 IMAGE_BOOTLOADER ?= "bcm2835-bootfiles"
 
-# Set initramfs extension
-KERNEL_INITRAMFS ?= ""
-
 # Kernel image name
 SDIMG_KERNELIMAGE_raspberrypi  ?= "kernel.img"
 SDIMG_KERNELIMAGE_raspberrypi2 ?= "kernel7.img"
@@ -48,16 +44,22 @@ IMAGE_ROOTFS_ALIGNMENT = "4096"
 
 # Use an uncompressed ext3 by default as rootfs
 SDIMG_ROOTFS_TYPE ?= "ext3"
-SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
+SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${SDIMG_ROOTFS_TYPE}"
 
-IMAGE_DEPENDS_rpi-sdimg = " \
-			parted-native \
-			mtools-native \
-			dosfstools-native \
+# For the names of kernel artifacts
+inherit kernel-artifact-names
+
+do_image_rpi_sdimg[depends] = " \
+    parted-native:do_populate_sysroot \
+    mtools-native:do_populate_sysroot \
+    dosfstools-native:do_populate_sysroot \
     virtual/kernel:do_deploy \
-			${IMAGE_BOOTLOADER} \
-			${@bb.utils.contains('KERNEL_IMAGETYPE', 'uImage', 'u-boot', '',d)} \
-			"
+    ${IMAGE_BOOTLOADER}:do_deploy \
+    ${@bb.utils.contains('RPI_USE_U_BOOT', '1', 'u-boot:do_deploy', '',d)} \
+    ${@bb.utils.contains('RPI_USE_U_BOOT', '1', 'rpi-u-boot-scr:do_deploy', '',d)} \
+"
+
+do_image_rpi_sdimg[recrdeps] = "do_build"
 
 # SD card image name
 SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.rpi-sdimg"
@@ -72,6 +74,23 @@ SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.rpi-sdimg"
 # Additional files and/or directories to be copied into the vfat partition from the IMAGE_ROOTFS.
 FATPAYLOAD ?= ""
 
+# SD card vfat partition image name
+SDIMG_VFAT_DEPLOY ?= "${RPI_USE_U_BOOT}"
+SDIMG_VFAT = "${IMAGE_NAME}.vfat"
+SDIMG_LINK_VFAT = "${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.vfat"
+
+def split_overlays(d, out, ver=None):
+    dts = d.getVar("KERNEL_DEVICETREE")
+    # Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' (4.1.x) or by '.dtbo' (4.4.9+) string and will be put in a dedicated folder
+    if out:
+        overlays = oe.utils.str_filter_out('\S+\-overlay\.dtb$', dts, d)
+        overlays = oe.utils.str_filter_out('\S+\.dtbo$', overlays, d)
+    else:
+        overlays = oe.utils.str_filter('\S+\-overlay\.dtb$', dts, d) + \
+                   " " + oe.utils.str_filter('\S+\.dtbo$', dts, d)
+
+    return overlays
+
 IMAGE_CMD_rpi-sdimg () {
 
     # Align partitions
@@ -82,7 +101,7 @@ IMAGE_CMD_rpi-sdimg () {
     echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTFS_SIZE KiB"
 
     # Check if we are building with device tree support
-	DTS="${@get_dts(d)}"
+    DTS="${KERNEL_DEVICETREE}"
 
     # Initialize sdcard image file
     dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE}
@@ -99,39 +118,37 @@ IMAGE_CMD_rpi-sdimg () {
     # Create a vfat image with boot files
     BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
     rm -f ${WORKDIR}/boot.img
-	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
+    mkfs.vfat -F32 -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
     mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/* ::/
     if test -n "${DTS}"; then
-		# Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' (4.1.x) or by '.dtbo' (4.4.9+) string and will be put in a dedicated folder
-		DT_OVERLAYS="${@split_overlays(d, 0)}"
-		DT_ROOT="${@split_overlays(d, 1)}"
-
         # Copy board device trees to root folder
-		for DTB in $DT_ROOT; do
-			DTB_BASE_NAME=`basename ${DTB} .dtb`
-
-			mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::${DTB_BASE_NAME}.dtb
+        for dtbf in ${@split_overlays(d, True)}; do
+            dtb=`basename $dtbf`
+            mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/$dtb ::$dtb
         done
 
         # Copy device tree overlays to dedicated folder
         mmd -i ${WORKDIR}/boot.img overlays
-		for DTB in $DT_OVERLAYS; do
-				DTB_EXT=${DTB##*.}
-				DTB_BASE_NAME=`basename ${DTB} ."${DTB_EXT}"`
-
-			mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.${DTB_EXT} ::overlays/${DTB_BASE_NAME}.${DTB_EXT}
+        for dtbf in ${@split_overlays(d, False)}; do
+            dtb=`basename $dtbf`
+            mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/$dtb ::overlays/$dtb
         done
     fi
-	case "${KERNEL_IMAGETYPE}" in
-	"uImage")
+    if [ "${RPI_USE_U_BOOT}" = "1" ]; then
         mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::${SDIMG_KERNELIMAGE}
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::uImage
         mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
-		;;
-	*)
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::${SDIMG_KERNELIMAGE}
-		;;
-	esac
+        if [ ! -z "${INITRAMFS_IMAGE}" -a "${INITRAMFS_IMAGE_BUNDLE}" = "1" ]; then
+            mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${INITRAMFS_LINK_NAME}.bin ::${KERNEL_IMAGETYPE}
+        else
+            mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE} ::${KERNEL_IMAGETYPE}
+        fi
+    else
+        if [ ! -z "${INITRAMFS_IMAGE}" -a "${INITRAMFS_IMAGE_BUNDLE}" = "1" ]; then
+            mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${INITRAMFS_LINK_NAME}.bin ::${SDIMG_KERNELIMAGE}
+        else
+            mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE} ::${SDIMG_KERNELIMAGE}
+        fi
+    fi
 
     if [ -n ${FATPAYLOAD} ] ; then
         echo "Copying payload into VFAT"
@@ -145,14 +162,20 @@ IMAGE_CMD_rpi-sdimg () {
     echo "${IMAGE_NAME}" > ${WORKDIR}/image-version-info
     mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}/image-version-info ::
 
+    # Deploy vfat partition
+    if [ "${SDIMG_VFAT_DEPLOY}" = "1" ]; then
+        cp ${WORKDIR}/boot.img ${IMGDEPLOYDIR}/${SDIMG_VFAT}
+        ln -sf ${SDIMG_VFAT} ${SDIMG_LINK_VFAT}
+    fi
+
     # Burn Partitions
-	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+    dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
     # If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
     if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
     then
-		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+        xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
     else
-		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+        dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
     fi
 
     # Optionally apply compression

conf/layer.conf

@@ -9,6 +9,24 @@ BBFILE_COLLECTIONS += "raspberrypi"
 BBFILE_PATTERN_raspberrypi := "^${LAYERDIR}/"
 BBFILE_PRIORITY_raspberrypi = "9"
 
+LAYERSERIES_COMPAT_raspberrypi = "sumo thud"
+
 # Additional license directories.
 LICENSE_PATH += "${LAYERDIR}/files/custom-licenses"
 
+# The dynamic-layers directory hosts the extensions and layer specific
+# modifications.
+#
+# The .bbappend and .bb files are included if the respective layer
+# collection is available.
+BBFILES += "${@' '.join('${LAYERDIR}/dynamic-layers/%s/recipes*/*/*.bbappend' % layer \
+               for layer in BBFILE_COLLECTIONS.split())}"
+BBFILES += "${@' '.join('${LAYERDIR}/dynamic-layers/%s/recipes*/*/*.bb' % layer \
+               for layer in BBFILE_COLLECTIONS.split())}"
+
+BBFILES_DYNAMIC += " \
+    openembedded-layer:${LAYERDIR}/dynamic-layers/openembedded-layer/*/*/*.bb \
+    openembedded-layer:${LAYERDIR}/dynamic-layers/openembedded-layer/*/*/*.bbappend \
+    qt5-layer:${LAYERDIR}/dynamic-layers/qt5-layer/*/*/*.bb \
+    qt5-layer:${LAYERDIR}/dynamic-layers/qt5-layer/*/*/*.bbappend \
+"

conf/machine/include/rpi-base.inc

@@ -6,6 +6,7 @@ SOC_FAMILY = "rpi"
 include conf/machine/include/soc-family.inc
 
 IMAGE_FSTYPES ?= "tar.bz2 ext3 rpi-sdimg"
+WKS_FILE ?= "sdimage-raspberrypi.wks"
 
 XSERVER = " \
     xserver-xorg \
@@ -13,15 +14,10 @@ XSERVER = " \
     ${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "xf86-video-modesetting", "xf86-video-fbdev", d)} \
     "
 
-KERNEL_DEVICETREE ?= " \
-    bcm2708-rpi-0-w.dtb \
-    bcm2708-rpi-b.dtb \
-    bcm2708-rpi-b-plus.dtb \
-    bcm2709-rpi-2-b.dtb \
-    bcm2710-rpi-3-b.dtb \
-    bcm2708-rpi-cm.dtb \
-    bcm2710-rpi-cm3.dtb \
-    \
+RPI_KERNEL_DEVICETREE_OVERLAYS ?= " \
+    overlays/at86rf233.dtbo \
+    overlays/dwc2.dtbo \
+    overlays/gpio-key.dtbo \
     overlays/hifiberry-amp.dtbo \
     overlays/hifiberry-dac.dtbo \
     overlays/hifiberry-dacplus.dtbo \
@@ -30,25 +26,54 @@ KERNEL_DEVICETREE ?= " \
     overlays/iqaudio-dac.dtbo \
     overlays/iqaudio-dacplus.dtbo \
     overlays/lirc-rpi.dtbo \
+    overlays/pi3-disable-bt.dtbo \
+    overlays/pi3-miniuart-bt.dtbo \
     overlays/pitft22.dtbo \
     overlays/pitft28-resistive.dtbo \
     overlays/pitft35-resistive.dtbo \
     overlays/pps-gpio.dtbo \
     overlays/rpi-ft5406.dtbo \
-    overlays/w1-gpio.dtbo \
-    overlays/w1-gpio-pullup.dtbo \
-    overlays/pi3-disable-bt.dtbo \
-    overlays/pi3-miniuart-bt.dtbo \
+    overlays/rpi-poe.dtbo \
     overlays/vc4-kms-v3d.dtbo \
+    overlays/w1-gpio-pullup.dtbo \
+    overlays/w1-gpio.dtbo \
     "
-KERNEL_IMAGETYPE ?= "Image"
+
+RPI_KERNEL_DEVICETREE ?= " \
+    bcm2708-rpi-0-w.dtb \
+    bcm2708-rpi-b.dtb \
+    bcm2708-rpi-b-plus.dtb \
+    bcm2709-rpi-2-b.dtb \
+    bcm2710-rpi-3-b.dtb \
+    bcm2710-rpi-3-b-plus.dtb \
+    bcm2708-rpi-cm.dtb \
+    bcm2710-rpi-cm3.dtb \
+    "
+
+KERNEL_DEVICETREE ?= " \
+    ${RPI_KERNEL_DEVICETREE} \
+    ${RPI_KERNEL_DEVICETREE_OVERLAYS} \
+    "
+
+# By default:
+#
+# * When u-boot is disabled use the "Image" format which can be directly loaded
+#   by the rpi firmware.
+#
+# * When u-boot is enabled use the "uImage" format and the "bootm" command
+#   within u-boot to load the kernel.
+KERNEL_BOOTCMD ??= "bootm"
+KERNEL_IMAGETYPE_UBOOT ??= "uImage"
+KERNEL_IMAGETYPE_DIRECT ??= "zImage"
+KERNEL_IMAGETYPE ?= "${@bb.utils.contains('RPI_USE_U_BOOT', '1', \
+        '${KERNEL_IMAGETYPE_UBOOT}', '${KERNEL_IMAGETYPE_DIRECT}', d)}"
 
 MACHINE_FEATURES += "apm usbhost keyboard vfat ext2 screen touchscreen alsa bluetooth wifi sdio"
 
 # Raspberry Pi has no hardware clock
 MACHINE_FEATURES_BACKFILL_CONSIDERED = "rtc"
 
-MACHINE_EXTRA_RRECOMMENDS += " kernel-modules"
+MACHINE_EXTRA_RRECOMMENDS += " kernel-modules udev-rules-rpi"
 
 # Set Raspberrypi splash image
 SPLASH = "psplash-raspberrypi"
@@ -60,32 +85,35 @@ def make_dtb_boot_files(d):
     imgtyp = d.getVar('KERNEL_IMAGETYPE')
 
     def transform(dtb):
+        base = os.path.basename(dtb)
         if dtb.endswith('dtb'):
             # eg: whatever/bcm2708-rpi-b.dtb has:
-            #     DEPLOYDIR file: ${KERNEL_IMAGETYPE}-bcm2708-rpi-b.dtb
+            #     DEPLOYDIR file: bcm2708-rpi-b.dtb
             #     destination: bcm2708-rpi-b.dtb
-            base = os.path.basename(dtb)
-            src = '{}-{}'.format(imgtyp, base)
-            dst = base
-            return '{};{}'.format(src, dst)
+            return base
         elif dtb.endswith('dtbo'):
             # overlay dtb:
             # eg: overlays/hifiberry-amp.dtbo has:
-            #     DEPLOYDIR file: ${KERNEL_IMAGETYPE}-hifiberry-amp.dtbo
+            #     DEPLOYDIR file: hifiberry-amp.dtbo
             #     destination: overlays/hifiberry-amp.dtbo
-            base = os.path.basename(dtb)
-            src = '{}-{}'.format(imgtyp, base)
-            dst = dtb
-            return '{};{}'.format(src, dtb)
+            return '{};{}'.format(base, dtb)
 
     return ' '.join([transform(dtb) for dtb in alldtbs.split(' ') if dtb])
 
 
 IMAGE_BOOT_FILES ?= "bcm2835-bootfiles/* \
                  ${@make_dtb_boot_files(d)} \
-                 ${KERNEL_IMAGETYPE};${SDIMG_KERNELIMAGE} \
+                 ${@bb.utils.contains('RPI_USE_U_BOOT', '1', \
+                    '${KERNEL_IMAGETYPE} u-boot.bin;${SDIMG_KERNELIMAGE} boot.scr', \
+                    '${KERNEL_IMAGETYPE};${SDIMG_KERNELIMAGE}', d)} \
                  "
+do_image_wic[depends] += " \
+    bcm2835-bootfiles:do_deploy \
+    ${@bb.utils.contains('RPI_USE_U_BOOT', '1', 'u-boot:do_deploy', '',d)} \
+    "
+
+do_image_wic[recrdeps] = "do_build"
 
 # The kernel image is installed into the FAT32 boot partition and does not need
 # to also be installed into the rootfs.
-RDEPENDS_kernel-base = ""
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""

conf/machine/include/rpi-default-providers.inc

@@ -6,5 +6,5 @@ PREFERRED_PROVIDER_virtual/egl ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4
 PREFERRED_PROVIDER_virtual/libgles2 ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "mesa", "userland", d)}"
 PREFERRED_PROVIDER_virtual/libgl ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "mesa", "mesa-gl", d)}"
 PREFERRED_PROVIDER_virtual/mesa ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "mesa", "mesa-gl", d)}"
-PREFERRED_PROVIDER_libgbm ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "mesa", "mesa-gl", d)}"
+PREFERRED_PROVIDER_virtual/libgbm ?= "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "mesa", "mesa-gl", d)}"
 PREFERRED_PROVIDER_jpeg ?= "jpeg"

conf/machine/include/rpi-default-versions.inc

@@ -1,3 +1,3 @@
 # RaspberryPi BSP default versions
 
-PREFERRED_VERSION_linux-raspberrypi ??= "4.9.%"
+PREFERRED_VERSION_linux-raspberrypi ??= "4.14.%"

conf/machine/raspberrypi-cm3.conf

@@ -2,5 +2,11 @@
 #@NAME: RaspberryPi Compute Module 3 (CM3)
 #@DESCRIPTION: Machine configuration for the RaspberryPi Compute Module 3 (CM3)
 
-MACHINEOVERRIDES = "raspberrypi2:${MACHINE}"
-include conf/machine/raspberrypi2.conf
+DEFAULTTUNE ?= "cortexa7thf-neon-vfpv4"
+require conf/machine/include/tune-cortexa7.inc
+include conf/machine/include/rpi-base.inc
+
+KBUILD_DEFCONFIG ?= "bcm2709_defconfig"
+SDIMG_KERNELIMAGE ?= "kernel7.img"
+UBOOT_MACHINE = "rpi_3_32b_config"
+SERIAL_CONSOLES ?= "115200;ttyAMA0"

conf/machine/raspberrypi.conf

@@ -7,7 +7,6 @@ DEFAULTTUNE ?= "arm1176jzfshf"
 require conf/machine/include/tune-arm1176jzf-s.inc
 include conf/machine/include/rpi-base.inc
 
-SERIAL_CONSOLE ?= "115200 ttyAMA0"
+SERIAL_CONSOLES ?= "115200;ttyAMA0"
 
 UBOOT_MACHINE = "rpi_config"
-VC4_CMA_SIZE_raspberrypi ?= "cma-64"

conf/machine/raspberrypi0-wifi.conf

@@ -6,10 +6,11 @@ DEFAULTTUNE ?= "arm1176jzfshf"
 require conf/machine/include/tune-arm1176jzf-s.inc
 include conf/machine/include/rpi-base.inc
 
-MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430"
+MACHINE_EXTRA_RRECOMMENDS += "\
+    linux-firmware-rpidistro-bcm43430 \
+    bluez-firmware-rpidistro-bcm43430a1-hcd \
+"
 
 SDIMG_KERNELIMAGE ?= "kernel.img"
-KERNEL_DEFCONFIG ?= "bcmrpi_defconfig"
-UBOOT_MACHINE ?= "rpi_config"
-SERIAL_CONSOLE ?= "115200 ttyS0"
-VC4_CMA_SIZE ?= "cma-128"
+UBOOT_MACHINE ?= "rpi_0_w_defconfig"
+SERIAL_CONSOLES ?= "115200;ttyS0"

conf/machine/raspberrypi0.conf

@@ -5,5 +5,4 @@
 MACHINEOVERRIDES = "raspberrypi:${MACHINE}"
 include conf/machine/raspberrypi.conf
 
-SERIAL_CONSOLE ?= "115200 ttyAMA0"
-VC4_CMA_SIZE ?= "cma-128"
+SERIAL_CONSOLES ?= "115200;ttyAMA0"

conf/machine/raspberrypi2.conf

@@ -7,7 +7,6 @@ DEFAULTTUNE ?= "cortexa7thf-neon-vfpv4"
 require conf/machine/include/tune-cortexa7.inc
 include conf/machine/include/rpi-base.inc
 
-SERIAL_CONSOLE ?= "115200 ttyAMA0"
+SERIAL_CONSOLES ?= "115200;ttyAMA0"
 
 UBOOT_MACHINE = "rpi_2_config"
-VC4_CMA_SIZE ?= "cma-256"

conf/machine/raspberrypi3-64.conf

@@ -2,39 +2,32 @@
 #@NAME: RaspberryPi 3 Development Board
 #@DESCRIPTION: Machine configuration for the RaspberryPi 3 in 64 bits mode
 
-MACHINEOVERRIDES = "raspberrypi3:raspberrypi:${MACHINE}"
+MACHINEOVERRIDES = "raspberrypi3:${MACHINE}"
 
-MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430"
+MACHINE_EXTRA_RRECOMMENDS += "\
+    linux-firmware-rpidistro-bcm43430 \
+    linux-firmware-rpidistro-bcm43455 \
+    bluez-firmware-rpidistro-bcm43430a1-hcd \
+    bluez-firmware-rpidistro-bcm4345c0-hcd \
+"
 
 require conf/machine/include/arm/arch-armv8.inc
 include conf/machine/include/rpi-base.inc
 
-KERNEL_DEVICETREE = " \
+RPI_KERNEL_DEVICETREE = " \
     broadcom/bcm2710-rpi-3-b.dtb \
+    broadcom/bcm2710-rpi-3-b-plus.dtb \
     broadcom/bcm2837-rpi-3-b.dtb \
-    \
-    overlays/hifiberry-amp.dtbo \
-    overlays/hifiberry-dac.dtbo \
-    overlays/hifiberry-dacplus.dtbo \
-    overlays/hifiberry-digi.dtbo \
-    overlays/i2c-rtc.dtbo \
-    overlays/iqaudio-dac.dtbo \
-    overlays/iqaudio-dacplus.dtbo \
-    overlays/lirc-rpi.dtbo \
-    overlays/pitft22.dtbo \
-    overlays/pitft28-resistive.dtbo \
-    overlays/pitft35-resistive.dtbo \
-    overlays/pps-gpio.dtbo \
-    overlays/rpi-ft5406.dtbo \
-    overlays/w1-gpio.dtbo \
-    overlays/w1-gpio-pullup.dtbo \
-    overlays/pi3-disable-bt.dtbo \
-    overlays/pi3-miniuart-bt.dtbo \
-    overlays/vc4-kms-v3d.dtbo \
     "
 
-SERIAL_CONSOLE ?= "115200 ttyS0"
-VC4_CMA_SIZE ?= "cma-256"
+SERIAL_CONSOLES ?= "115200;ttyS0"
 
 UBOOT_MACHINE = "rpi_3_config"
 MACHINE_FEATURES_append = " vc4graphics"
+
+# When u-boot is enabled we need to use the "Image" format and the "booti"
+# command to load the kernel
+KERNEL_IMAGETYPE_UBOOT ?= "Image"
+# "zImage" not supported on arm64 and ".gz" images not supported by bootloader yet
+KERNEL_IMAGETYPE_DIRECT ?= "Image"
+KERNEL_BOOTCMD ?= "booti"

conf/machine/raspberrypi3.conf

@@ -6,10 +6,13 @@ DEFAULTTUNE ?= "cortexa7thf-neon-vfpv4"
 require conf/machine/include/tune-cortexa7.inc
 include conf/machine/include/rpi-base.inc
 
-MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430"
+MACHINE_EXTRA_RRECOMMENDS += "\
+    linux-firmware-rpidistro-bcm43430 \
+    linux-firmware-rpidistro-bcm43455 \
+    bluez-firmware-rpidistro-bcm43430a1-hcd \
+    bluez-firmware-rpidistro-bcm4345c0-hcd \
+"
 
 SDIMG_KERNELIMAGE ?= "kernel7.img"
-KERNEL_DEFCONFIG ?= "bcm2709_defconfig"
 UBOOT_MACHINE = "rpi_3_32b_config"
-SERIAL_CONSOLE ?= "115200 ttyS0"
-VC4_CMA_SIZE ?= "cma-256"
+SERIAL_CONSOLES ?= "115200;ttyS0"

docs/conf.py

@@ -120,7 +120,7 @@ todo_include_todos = False
 # The theme to use for HTML and HTML Help pages.  See the documentation for
 # a list of builtin themes.
 #
-html_theme = 'alabaster'
+# html_theme = 'alabaster'
 
 # Theme options are theme-specific and customize the look and feel of a theme
 # further.  For a list of options available for each theme, see the

docs/contributing.md

@@ -2,37 +2,108 @@
 
 ## Mailing list
 
-The main communication tool we use is a mailing list:
+The main communication tool in use is the Yocto Project mailing list:
+
 * <yocto@yoctoproject.org>
 * <https://lists.yoctoproject.org/listinfo/yocto>
 
-Feel free to ask any kind of questions but always prepend your email subject
-with "[meta-raspberrypi]". This is because we use the 'yocto' mailing list and
-not a perticular 'meta-raspberrypi' mailing list.
+Feel free to ask any kind of questions but please always prepend your email
+subject with `[meta-raspberrypi]` as this is the global *Yocto* mailing
+list and not a dedicated *meta-raspberrypi* mailing list.
 
-## Patches and pull requests
+## Formatting patches
 
-All the contributions should be compliant with the openembedded patch
-guidelines: <http://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines>
+First and foremost, all of the contributions to the layer must be compliant
+with the standard openembedded patch guidelines:
 
-To contribute to this project you should send pull requests to the github mirror
-(<https://github.com/agherzan/meta-raspberrypi>). **Additionally** you can send
-the patches for review to the above specified mailing list.
+* <http://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines>
 
-When creating patches for the mailing list, please use something like:
+In summary, your commit log messages should be formatted as follows:
+
+    <layer-component>: <short log/statement of what needed to be changed>
+
+    (Optional pointers to external resources, such as defect tracking)
+
+    The intent of your change.
+
+    (Optional: if it's not clear from above, how your change resolves
+    the issues in the first part)
+
+    Signed-off-by: Your Name <yourname@youremail.com>
+
+The `<layer-component>` is the layer component name that your changes affect.
+It is important that you choose it correctly. A simple guide for selecting a
+a good component name is the following:
+
+* For changes that affect *layer recipes*, please just use the **base names**
+  of the affected recipes, separated by commas (`,`), as the component name.
+  For example: use `omxplayer` instead of `omxplayer_git.bb`. If you are
+  adding new recipe(s), just use the new recipe(s) base name(s). An example
+  for changes to multiple recipes would be `userland,vc-graphics,wayland`.
+* For changes that affect the *layer documentation*, please just use `docs`
+  as the component name.
+* For changes that affect *other files*, i.e. under the `conf` directory,
+  please use the full path as the component name, e.g. `conf/layer.conf`.
+* For changes that affect the *layer itself* and do not fall into any of
+  the above cases, please use `meta-raspberrypi` as the component name.
+
+A full example of a suitable commit log message is below:
+
+    foobar: Adjusted the foo setting in bar
+
+    When using foobar on systems with less than a gigabyte of RAM common
+    usage patterns often result in an Out-of-memory condition causing
+    slowdowns and unexpected application termination.
+
+    Low-memory systems should continue to function without running into
+    memory-starvation conditions with minimal cost to systems with more
+    available memory.  High-memory systems will be less able to use the
+    full extent of the system, a dynamically tunable option may be best,
+    long-term.
+
+    The foo setting in bar was decreased from X to X-50% in order to
+    ensure we don't exhaust all system memory with foobar threads.
+
+    Signed-off-by: Joe Developer <joe.developer@example.com>
+
+A common issue during patch reviewing is commit log formatting, please review
+the above formatting guidelines carefully before sending your patches.
+
+## Sending patches
+
+The preferred method to contribute to this project is to send pull
+requests to the GitHub mirror of the layer:
+
+* <https://github.com/agherzan/meta-raspberrypi>
+
+**In addition**, you may send patches for review to the above specified
+mailing list. In this case, when creating patches using `git` please make
+sure to use the following formatting for the message subject:
 
     git format-patch -s --subject-prefix='meta-raspberrypi][PATCH' origin
 
-When sending patches to the mailing list, please use something like:
+Then, for sending patches to the mailing list, you may use this command:
 
     git send-email --to yocto@yoctoproject.org <generated patch>
 
-## Github issues
+## GitHub issues
 
-In order to manage and trace the meta-raspberrypi issues, we use github issues:
-<https://github.com/agherzan/meta-raspberrypi/issues>
+In order to manage and track the layer issues more efficiently, the
+GitHub issues facility is used by this project:
+
+* <https://github.com/agherzan/meta-raspberrypi/issues>
+
+If you submit patches that have a GitHub issue associated, please make sure to
+use standard GitHub keywords, e.g. `closes`, `resolves` or `fixes`, before the
+"Signed-off-by" tag to close the relevant issues automatically:
+
+    foobar: Adjusted the foo setting in bar
+
+    Fixes: #324
+
+    Signed-off-by: Joe Developer <joe.developer@example.com>
+
+More information on the available GitHub close keywords can be found here:
+
+* <https://help.github.com/articles/closing-issues-using-keywords>
 
-If you push patches which have a github issue associated, please provide the
-issue number in the commit log just before "Signed-off-by" line(s). Example line
-for a bug:
-`[Issue #13]`

docs/extra-build-config.md

@@ -32,6 +32,8 @@ Accommodate the values above to your own needs (ex: ext3 / ext4).
 * `GPU_MEM_1024`: GPU memory in megabyte for the 1024MB Raspberry Pi. Ignored by
   the 256MB/512MB RP. Overrides gpu_mem. Max 944. Default not set.
 
+See: <https://www.raspberrypi.org/documentation/configuration/config-txt/memory.md>
+
 ## Add purchased license codecs
 
 To add you own licenses use variables `KEY_DECODE_MPG2` and `KEY_DECODE_WVC1` in
@@ -44,6 +46,7 @@ You can supply more licenses separated by comma. Example:
 
     KEY_DECODE_WVC1 = "0x12345678,0xabcdabcd,0x87654321"
 
+See: <https://www.raspberrypi.org/documentation/configuration/config-txt/codeclicence.md>
 
 ## Disable overscan
 
@@ -53,18 +56,57 @@ local.conf:
 
     DISABLE_OVERSCAN = "1"
 
+## Disable splash screen
+
+By default a rainbow splash screen is shown after the GPU firmware is loaded.
+To disable this set this variable in local.conf:
+
+    DISABLE_SPLASH = "1"
+
+## Boot delay
+
+The Raspberry Pi waits a number of seconds after loading the GPU firmware and
+before loading the kernel. By default it is one second. This is useful if your
+SD card needs a while to get ready before Linux is able to boot from it.
+To remove (or adjust) this delay set these variables in local.conf:
+
+    BOOT_DELAY = "0"
+    BOOT_DELAY_MS = "0"
+
 ## Set overclocking options
 
-The Raspberry PI can be overclocked. As of now overclocking up to the "Turbo
+The Raspberry Pi can be overclocked. As of now overclocking up to the "Turbo
 Mode" is officially supported by the raspbery and does not void warranty. Check
-the config.txt for a detailed description of options and modes. Example turbo
-mode:
+the config.txt for a detailed description of options and modes. The following
+variables are supported in local.conf: `ARM_FREQ`, `GPU_FREQ`, `CORE_FREQ`,
+`SDRAM_FREQ` and `OVER_VOLTAGE`.
+
+Example official settings for Turbo Mode in Raspberry Pi 2:
 
     ARM_FREQ = "1000"
     CORE_FREQ = "500"
     SDRAM_FREQ = "500"
     OVER_VOLTAGE = "6"
 
+See: <https://www.raspberrypi.org/documentation/configuration/config-txt/overclocking.md>
+
+## HDMI and composite video options
+
+The Raspberry Pi can output video over HDMI or SDTV composite (the RCA connector).
+By default the video mode for these is autodetected on boot: the HDMI mode is
+selected according to the connected monitor's EDID information and the composite
+mode is defaulted to NTSC using a 4:3 aspect ratio. Check the config.txt for a
+detailed description of options and modes. The following variables are supported in
+local.conf: `HDMI_FORCE_HOTPLUG`, `HDMI_DRIVE`, `HDMI_GROUP`, `HDMI_MODE`,
+`CONFIG_HDMI_BOOST`, `SDTV_MODE`, `SDTV_ASPECT` and `DISPLAY_ROTATE`.
+
+Example to force HDMI output to 720p in CEA mode:
+
+    HDMI_GROUP = "1"
+    HDMI_MODE = "4"
+
+See: <https://www.raspberrypi.org/documentation/configuration/config-txt/video.md>
+
 ## Video camera support with V4L2 drivers
 
 Set this variable to enable support for the video camera (Linux 3.12.4+
@@ -95,30 +137,39 @@ this variable in local.conf:
 
     ENABLE_KGDB = "1"
 
+## Disable rpi boot logo
+
+To disable rpi boot logo, set this variable in local.conf:
+
+    DISABLE_RPI_BOOT_LOGO = "1"
+
 ## Boot to U-Boot
 
 To have u-boot load kernel image, set in your local.conf:
 
-    KERNEL_IMAGETYPE = "uImage"
+    RPI_USE_U_BOOT = "1"
 
-This will make kernel.img be u-boot image which will load uImage. By default,
-kernel.img is the actual kernel image (ex. Image).
+This will select the appropriate image format for use with u-boot automatically.
+For further customisation the KERNEL_IMAGETYPE and KERNEL_BOOTCMD variables can
+be overridden to select the exact kernel image type (eg. zImage) and u-boot
+command (eg. bootz) to be used.
 
 ## Image with Initramfs
 
 To build an initramfs image:
 
-* Set this 3 kernel variables (in linux-raspberrypi.inc for example)
+* Set this 3 kernel variables (in kernel's do_configure_prepend in linux-raspberrypi.inc after the line kernel_configure_variable LOCALVERSION "\"\""
+)
   - kernel_configure_variable BLK_DEV_INITRD y
   - kernel_configure_variable INITRAMFS_SOURCE ""
   - kernel_configure_variable RD_GZIP y
 
-* Set the yocto variables (in linux-raspberrypi.inc for example)
-  - `INITRAMFS_IMAGE = "<a name for your initramfs image>"`
+* Set the yocto variables (e.g. in local.conf)
+  - `INITRAMFS_IMAGE = "<name for your initramfs image>"`
   - `INITRAMFS_IMAGE_BUNDLE = "1"`
-
-* Set the meta-rasberrypi variable (in raspberrypi.conf for example)
-  - `KERNEL_INITRAMFS = "-initramfs"`
+  - `BOOT_SPACE = "1073741"`
+  - `INITRAMFS_MAXSIZE = "315400"`
+  - `IMAGE_FSTYPES_pn-${INITRAMFS_IMAGE} = "${INITRAMFS_FSTYPES}"`
 
 ## Enable SPI bus
 
@@ -171,10 +222,42 @@ needs a fixed core frequency and enable_uart wil set it to the minimum. Certain
 operations - 60fps h264 decode, high quality deinterlace - which aren't
 performed on the ARM may be affected, and we wouldn't want to do that to users
 who don't want to use the serial port. Users who want serial console support on
-RaspberryPi3 will have to explicitely set in local.conf:
+RaspberryPi3 will have to explicitly set in local.conf:
 
     ENABLE_UART = "1"
 
 Ref.:
 * <https://github.com/raspberrypi/firmware/issues/553>
 * <https://github.com/RPi-Distro/repo/issues/22>
+
+## Enable USB Peripheral (Gadget) support
+
+The standard USB driver only supports host mode operations.  Users who
+want to use gadget modules like g_ether should set the following in
+local.conf:
+
+    ENABLE_DWC2_PERIPHERAL = "1"
+
+## Enable Openlabs 802.15.4 radio module
+
+When using device tree kernels, set this variable to enable the 802.15.4 hat:
+
+    ENABLE_AT86RF = "1"
+
+See: <https://openlabs.co/OSHW/Raspberry-Pi-802.15.4-radio>
+
+## Manual additions to config.txt
+
+The `RPI_EXTRA_CONFIG` variable can be used to manually add additional lines to
+the `config.txt` file if there is not a specific option above for the
+configuration you need. To add multiple lines you must include `\n` separators.
+If double-quotes are needed in the lines you are adding you can use single
+quotes around the whole string.
+
+For example, to add a comment containing a double-quote and a configuration
+option:
+
+    RPI_EXTRA_CONFIG = ' \n \
+        # Raspberry Pi 7\" display/touch screen \n \
+        lcd_rotate=2 \n \
+        '

docs/layer-contents.md

@@ -9,16 +9,26 @@
 * raspberrypi3
 * raspberrypi3-64 (64 bit kernel & userspace)
 * raspberrypi-cm (dummy alias for raspberrypi)
-* raspberrypi-cm3 (dummy alias for raspberrypi2)
+* raspberrypi-cm3
+
+Note: The raspberrypi3 machines include support for Raspberry Pi 3B+.
 
 ## Images
 
-* rpi-hwup-image
-  * Hardware up image
-
-* rpi-basic-image
-  * Based on rpi-hwup-image with some added features (ex: splash)
-
 * rpi-test-image
-  * Image based on rpi-basic-image which includes most of the packages in this
+  * Image based on core-image-base which includes most of the packages in this
     layer and some media samples.
+
+For other uses it's recommended to base images on `core-image-minimal` or
+`core-image-base` as appropriate. The old image names (`rpi-hwup-image` and
+`rpi-basic-image`) are deprecated.
+
+## WiFi and Bluetooth Firmware
+
+Be aware that the WiFi and Bluetooth firmware for the supported boards
+is not available in the base version of `linux-firmware` from OE-Core
+(poky). The files are added from Raspbian repositories in this layer's
+bbappends to that recipe. All machines define
+`MACHINE_EXTRA_RRECOMMENDS` to include the required wireless firmware;
+raspberrypi3 supports 3, 3B, and 3B+ and so include multiple firmware
+packages.

dynamic-layers/openembedded-layer/recipes-core/packagegroups/packagegroup-meta-oe.bbappend

@@ -0,0 +1 @@
+RDEPENDS_packagegroup-meta-oe-kernel_remove_rpi = "bpftool"

dynamic-layers/openembedded-layer/recipes-kernel/linux/bpftool.bbappend

@@ -0,0 +1,3 @@
+# remove it when we upgrade to kernel > 4.14
+#
+COMPATIBLE_HOST_rpi = "null"

dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend

@@ -0,0 +1,17 @@
+PACKAGECONFIG_GL_rpi = "${@bb.utils.contains('DISTRO_FEATURES', 'x11 opengl', 'gl', \
+                        bb.utils.contains('DISTRO_FEATURES',     'opengl', 'eglfs gles2', \
+                                                                       '', d), d)}"
+PACKAGECONFIG_GL_append_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', ' gbm kms', '', d)}"
+PACKAGECONFIG_FONTS_rpi = "fontconfig"
+PACKAGECONFIG_append_rpi = " libinput examples tslib xkb xkbcommon-evdev"
+PACKAGECONFIG_remove_rpi = "tests"
+
+OE_QTBASE_EGLFS_DEVICE_INTEGRATION_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', 'eglfs_brcm', d)}"
+
+do_configure_prepend_rpi() {
+    # Add the appropriate EGLFS_DEVICE_INTEGRATION
+    if [ "${@d.getVar('OE_QTBASE_EGLFS_DEVICE_INTEGRATION')}" != "" ]; then
+        echo "EGLFS_DEVICE_INTEGRATION = ${OE_QTBASE_EGLFS_DEVICE_INTEGRATION}" >> ${S}/mkspecs/oe-device-extra.pri
+    fi
+}
+RDEPENDS_${PN}_append_rpi = " userland"

recipes-bsp/bootfiles/bcm2835-bootfiles.bb

@@ -3,13 +3,15 @@ LICENSE = "Proprietary"
 
 LIC_FILES_CHKSUM = "file://LICENCE.broadcom;md5=4a4d169737c0786fb9482bb6d30401d1"
 
-inherit deploy
+inherit deploy nopackages
 
 include recipes-bsp/common/firmware.inc
 
-RDEPENDS_${PN} = "rpi-config"
+INHIBIT_DEFAULT_DEPS = "1"
 
-COMPATIBLE_MACHINE = "raspberrypi"
+DEPENDS = "rpi-config"
+
+COMPATIBLE_MACHINE = "^rpi$"
 
 S = "${RPIFW_S}/boot"
 
@@ -32,7 +34,7 @@ do_deploy() {
     touch ${DEPLOYDIR}/${PN}/${PN}-${PV}.stamp
 }
 
-addtask deploy before do_package after do_install
+addtask deploy before do_build after do_install
 do_deploy[dirs] += "${DEPLOYDIR}/${PN}"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"

recipes-bsp/bootfiles/rpi-config_git.bb

@@ -3,9 +3,9 @@ DESCRIPTION = "Commented config.txt file for the Raspberry Pi. \
                the ARM core is initialised. It can be used to set various \
                system configuration parameters."
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
 
-COMPATIBLE_MACHINE = "raspberrypi"
+COMPATIBLE_MACHINE = "^rpi$"
 
 SRCREV = "648ffc470824c43eb0d16c485f4c24816b32cd6f"
 SRC_URI = "git://github.com/Evilpaul/RPi-config.git;protocol=git;branch=master \
@@ -15,14 +15,17 @@ S = "${WORKDIR}/git"
 
 PR = "r5"
 
+INHIBIT_DEFAULT_DEPS = "1"
+
 PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
 PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}"
 PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}"
 PITFT35r="${@bb.utils.contains("MACHINE_FEATURES", "pitft35r", "1", "0", d)}"
 
 VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
+VC4DTBO ?= "vc4-kms-v3d"
 
-inherit deploy
+inherit deploy nopackages
 
 do_deploy() {
     install -d ${DEPLOYDIR}/bcm2835-bootfiles
@@ -30,25 +33,33 @@ do_deploy() {
     cp ${S}/config.txt ${DEPLOYDIR}/bcm2835-bootfiles/
 
     if [ -n "${KEY_DECODE_MPG2}" ]; then
-        sed -i '/#decode_MPG2/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#decode_MPG2=/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${KEY_DECODE_WVC1}" ]; then
-        sed -i '/#decode_WVC1/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#decode_WVC1=/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${DISABLE_OVERSCAN}" ]; then
-        sed -i '/#disable_overscan/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#disable_overscan=/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
+    if [ -n "${DISABLE_SPLASH}" ]; then
+        sed -i '/#disable_splash=/ c\disable_splash=${DISABLE_SPLASH}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Set overclocking options
     if [ -n "${ARM_FREQ}" ]; then
-        sed -i '/#arm_freq/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#arm_freq=/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${GPU_FREQ}" ]; then
+        sed -i '/#gpu_freq=/ c\gpu_freq=${GPU_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${CORE_FREQ}" ]; then
-        sed -i '/#core_freq/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#core_freq=/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${SDRAM_FREQ}" ]; then
-        sed -i '/#sdram_freq/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#sdram_freq=/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${OVER_VOLTAGE}" ]; then
-        sed -i '/#over_voltage/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#over_voltage=/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
 
     # GPU memory
@@ -56,13 +67,47 @@ do_deploy() {
         sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${GPU_MEM_256}" ]; then
-        sed -i '/#gpu_mem_256/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#gpu_mem_256=/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${GPU_MEM_512}" ]; then
-        sed -i '/#gpu_mem_512/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#gpu_mem_512=/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${GPU_MEM_1024}" ]; then
-        sed -i '/#gpu_mem_1024/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#gpu_mem_1024=/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Set boot delay
+    if [ -n "${BOOT_DELAY}" ]; then
+        sed -i '/#boot_delay=/ c\boot_delay=${BOOT_DELAY}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${BOOT_DELAY_MS}" ]; then
+        sed -i '/#boot_delay_ms=/ c\boot_delay_ms=${BOOT_DELAY_MS}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Set HDMI and composite video options
+    if [ -n "${HDMI_FORCE_HOTPLUG}" ]; then
+        sed -i '/#hdmi_force_hotplug=/ c\hdmi_force_hotplug=${HDMI_FORCE_HOTPLUG}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${HDMI_DRIVE}" ]; then
+        sed -i '/#hdmi_drive=/ c\hdmi_drive=${HDMI_DRIVE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${HDMI_GROUP}" ]; then
+        sed -i '/#hdmi_group=/ c\hdmi_group=${HDMI_GROUP}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${HDMI_MODE}" ]; then
+        sed -i '/#hdmi_mode=/ c\hdmi_mode=${HDMI_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${CONFIG_HDMI_BOOST}" ]; then
+        sed -i '/#config_hdmi_boost=/ c\config_hdmi_boost=${CONFIG_HDMI_BOOST}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${SDTV_MODE}" ]; then
+        sed -i '/#sdtv_mode=/ c\sdtv_mode=${SDTV_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${SDTV_ASPECT}" ]; then
+        sed -i '/#sdtv_aspect=/ c\sdtv_aspect=${SDTV_ASPECT}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${DISPLAY_ROTATE}" ]; then
+        sed -i '/#display_rotate=/ c\display_rotate=${DISPLAY_ROTATE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
 
     # Video camera support
@@ -83,6 +128,7 @@ do_deploy() {
         echo "dtparam=spi=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
 
+    # I2C support
     if [ -n "${ENABLE_I2C}" ] || [ "${PITFT}" = "1" ]; then
         echo "# Enable I2C" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtparam=i2c1=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
@@ -94,12 +140,10 @@ do_deploy() {
         echo "# Enable PITFT22 display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtoverlay=pitft22,rotate=270,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
-
     if [ "${PITFT28r}" = "1" ]; then
         echo "# Enable PITFT28r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtoverlay=pitft28-resistive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
-
     if [ "${PITFT35r}" = "1" ]; then
         echo "# Enable PITFT35r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtoverlay=pitft35-resistive,rotate=90,speed=42000000,fps=20" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
@@ -114,7 +158,7 @@ do_deploy() {
     # VC4 Graphics support
     if [ "${VC4GRAPHICS}" = "1" ]; then
         echo "# Enable VC4 Graphics" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
-        echo "dtoverlay=vc4-kms-v3d,${VC4_CMA_SIZE}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtoverlay=${VC4DTBO}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
 
     # Waveshare "C" 1024x600 7" Rev2.1 IPS capacitive touch (http://www.waveshare.com/7inch-HDMI-LCD-C.htm)
@@ -126,15 +170,32 @@ do_deploy() {
         echo "hdmi_cvt 1024 600 60 6 0 0 0" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "hdmi_drive=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
+
+    # DWC2 USB peripheral support
+    if [ "${ENABLE_DWC2_PERIPHERAL}" = "1" ]; then
+        echo "# Enable USB peripheral mode" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtoverlay=dwc2,dr_mode=peripheral" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # AT86RF23X support
+    if [ "${ENABLE_AT86RF}" = "1" ]; then
+        echo "# Enable AT86RF23X" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtoverlay=at86rf233,speed=3000000" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Append extra config if the user has provided any
+    printf "${RPI_EXTRA_CONFIG}\n" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
 }
 
 do_deploy_append_raspberrypi3-64() {
-    # Device Tree support
-    echo "# Load correct Device Tree for Aarch64" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
-    echo "device_tree=bcm2710-rpi-3-b.dtb" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    echo "# have a properly sized image" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    echo "disable_overscan=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+
+    echo "# Enable audio (loads snd_bcm2835)" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    echo "dtparam=audio=on" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
 }
 
-addtask deploy before do_package after do_install
+addtask deploy before do_build after do_install
 do_deploy[dirs] += "${DEPLOYDIR}/bcm2835-bootfiles"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"

recipes-bsp/common/firmware.inc

@@ -1,10 +1,11 @@
-RPIFW_DATE ?= "20170405"
-RPIFW_SRC_URI ?= "https://github.com/raspberrypi/firmware/archive/1.${RPIFW_DATE}.tar.gz"
-RPIFW_S ?= "${WORKDIR}/firmware-1.${RPIFW_DATE}"
+RPIFW_DATE ?= "20190212"
+SRCREV ?= "83977fe3b6ef54c1d29c83b0a778d330f523441f"
+RPIFW_SRC_URI ?= "https://github.com/raspberrypi/firmware/archive/${SRCREV}.tar.gz"
+RPIFW_S ?= "${WORKDIR}/firmware-${SRCREV}"
 
 SRC_URI = "${RPIFW_SRC_URI}"
-SRC_URI[md5sum] = "ea82d14a7cd8cfae9b78e00d4e56bc71"
-SRC_URI[sha256sum] = "2f4e5bddbac1372590db203002c35cbba3fb9d6172a93c314ee27bf05ae13bff"
+SRC_URI[md5sum] = "5ccdb5447cbdd3ee0158a514f7b76cb9"
+SRC_URI[sha256sum] = "9a34ccc4a51695a33206cc6c8534f615ba5a30fcbce5fa3add400ecc6b80ad8a"
+
 
 PV = "${RPIFW_DATE}"
-

recipes-bsp/rpi-u-boot-scr/files/boot.cmd

@@ -1,3 +0,0 @@
-fdt addr ${fdt_addr} && fdt get value bootargs /chosen bootargs
-fatload mmc 0:1 ${kernel_addr_r} uImage
-bootm ${kernel_addr_r} - ${fdt_addr}

recipes-bsp/rpi-u-boot-scr/files/boot.cmd.in

@@ -0,0 +1,3 @@
+fdt addr ${fdt_addr} && fdt get value bootargs /chosen bootargs
+fatload mmc 0:1 ${kernel_addr_r} @@KERNEL_IMAGETYPE@@
+@@KERNEL_BOOTCMD@@ ${kernel_addr_r} - ${fdt_addr}

recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb

@@ -1,17 +1,22 @@
 SUMMARY = "U-boot boot scripts for Raspberry Pi"
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
-COMPATIBLE_MACHINE = "rpi"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
+COMPATIBLE_MACHINE = "^rpi$"
 
 DEPENDS = "u-boot-mkimage-native"
 
-SRC_URI = "file://boot.cmd"
+INHIBIT_DEFAULT_DEPS = "1"
+
+SRC_URI = "file://boot.cmd.in"
 
 do_compile() {
+    sed -e 's/@@KERNEL_IMAGETYPE@@/${KERNEL_IMAGETYPE}/' \
+        -e 's/@@KERNEL_BOOTCMD@@/${KERNEL_BOOTCMD}/' \
+        "${WORKDIR}/boot.cmd.in" > "${WORKDIR}/boot.cmd"
     mkimage -A arm -T script -C none -n "Boot script" -d "${WORKDIR}/boot.cmd" boot.scr
 }
 
-inherit deploy
+inherit deploy nopackages
 
 do_deploy() {
     install -d ${DEPLOYDIR}

recipes-bsp/u-boot/u-boot_%.bbappend

@@ -1 +1 @@
-RDEPENDS_${PN}_append_rpi = " rpi-u-boot-scr"
+DEPENDS_append_rpi = " rpi-u-boot-scr"

recipes-connectivity/bluez5/bluez5/brcm43438.service

@@ -1,12 +0,0 @@
-[Unit]
-Description=Broadcom BCM43438 bluetooth HCI
-ConditionPathIsDirectory=/proc/device-tree/soc/gpio@7e200000/bt_pins
-Before=bluetooth.service
-After=dev-ttyAMA0.device
-
-[Service]
-Type=simple
-ExecStart=/usr/bin/hciattach -n /dev/ttyAMA0 bcm43xx 921600 noflow -
-
-[Install]
-WantedBy=multi-user.target

recipes-connectivity/bluez5/bluez5_%.bbappend

@@ -1,26 +1,16 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 
-SRC_URI_append_raspberrypi3 = " \
-    file://BCM43430A1.hcd \
+BCM_BT_SOURCES =  " \
     file://0001-bcm43xx-Add-bcm43xx-3wire-variant.patch \
     file://0002-bcm43xx-The-UART-speed-must-be-reset-after-the-firmw.patch \
     file://0003-Increase-firmware-load-timeout-to-30s.patch \
     file://0004-Move-the-43xx-firmware-into-lib-firmware.patch \
-    file://brcm43438.service \
-    "
+"
 
-do_install_append_raspberrypi3() {
-    install -d ${D}/lib/firmware/brcm/
-    install -m 0644 ${WORKDIR}/BCM43430A1.hcd ${D}/lib/firmware/brcm/BCM43430A1.hcd
+BCM_BT_RDEPENDS = "pi-bluetooth"
 
-    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
-        install -d ${D}${systemd_unitdir}/system
-        install -m 0644 ${WORKDIR}/brcm43438.service ${D}${systemd_unitdir}/system
-    fi
-}
+SRC_URI_append_raspberrypi0-wifi = " ${BCM_BT_SOURCES}"
+SRC_URI_append_raspberrypi3 = " ${BCM_BT_SOURCES}"
 
-FILES_${PN}_append_raspberrypi3 = " \
-    /lib/firmware/brcm/BCM43430A1.hcd \
-    "
-
-SYSTEMD_SERVICE_${PN}_append_raspberrypi3 = " brcm43438.service"
+RDEPENDS_${PN}_append_raspberrypi0-wifi = " ${BCM_BT_RDEPENDS}"
+RDEPENDS_${PN}_append_raspberrypi3 = " ${BCM_BT_RDEPENDS}"

recipes-connectivity/pi-bluetooth/pi-bluetooth/0001-bthelper-correct-path-for-hciconfig-under-Yocto.patch

@@ -0,0 +1,28 @@
+From af91c96951a11f81f5cea88a0010161592c89310 Mon Sep 17 00:00:00 2001
+From: "Peter A. Bigot" <pab@pabigot.com>
+Date: Wed, 14 Nov 2018 09:19:51 -0600
+Subject: [PATCH] bthelper: correct path for hciconfig under Yocto
+
+Upstream-Status: Inapproprate [OE-specific]
+Signed-off-by: Peter A. Bigot <pab@pabigot.com>
+---
+ usr/bin/bthelper | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/usr/bin/bthelper b/usr/bin/bthelper
+index 255fdeb..4e1a1a4 100755
+--- a/usr/bin/bthelper
++++ b/usr/bin/bthelper
+@@ -10,7 +10,7 @@ fi
+ 
+ dev="$1"
+ # Need to bring hci up before looking at MAC as it can be all zeros during init
+-/bin/hciconfig "$dev" up
+-/bin/hciconfig "$dev" |grep -q "BD Address: B8:27:EB:" || exit 0
++/usr/bin/hciconfig "$dev" up
++/usr/bin/hciconfig "$dev" |grep -q "BD Address: B8:27:EB:" || exit 0
+ /usr/bin/hcitool -i "$dev" cmd 0x3f 0x1c 0x01 0x02 0x00 0x01 0x01 > /dev/null
+ 
+-- 
+2.17.1
+

recipes-connectivity/pi-bluetooth/pi-bluetooth_git.bb

@@ -0,0 +1,46 @@
+SUMMARY = "Script to properly configure BT-HCI on Raspberry Pi"
+HOMEPAGE = "https://github.com/RPi-Distro/pi-bluetooth"
+SECTION = "kernel"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "\
+    file://debian/copyright;md5=6af8de3c8ee71f8e91e9b22f84ff2022 \
+"
+
+SRC_URI = "\
+    git://github.com/RPi-Distro/pi-bluetooth \
+    file://0001-bthelper-correct-path-for-hciconfig-under-Yocto.patch \
+"
+SRCREV = "2e1a393955910aea67bbf3c921be35a66e8a8fbe"
+PV = "1.1+git${SRCPV}"
+
+S = "${WORKDIR}/git"
+
+# hciuart.service replaces what was brcm43438.service 
+inherit systemd
+SYSTEMD_SERVICE_${PN} = "\
+    hciuart.service \
+    bthelper@.service \
+"
+
+inherit allarch
+
+do_install() {
+    install -d ${D}${sysconfdir}/udev/rules.d
+    install -m 0644 ${S}/lib/udev/rules.d/* ${D}${sysconfdir}/udev/rules.d
+
+    install -d ${D}${bindir}
+    install -m 0755 ${S}/usr/bin/bthelper ${D}${bindir}
+    install -m 0755 ${S}/usr/bin/btuart ${D}${bindir}
+
+    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
+        install -d ${D}${systemd_system_unitdir}
+        install -m 0644 ${S}/debian/pi-bluetooth.bthelper@.service ${D}${systemd_system_unitdir}/bthelper@.service
+        install -m 0644 ${S}/debian/pi-bluetooth.hciuart.service ${D}${systemd_system_unitdir}/hciuart.service
+    fi
+}
+
+FILES_${PN} = "\
+    ${bindir} \
+    ${sysconfdir} \
+    ${systemd_unitdir}/system \
+"

recipes-core/images/rpi-basic-image.bb

@@ -1,6 +1,15 @@
-# Base this image on rpi-hwup-image
-include rpi-hwup-image.bb
+# Base this image on core-image-minimal
+include recipes-core/images/core-image-minimal.bb
+
+# Include modules in rootfs
+IMAGE_INSTALL += " \
+	kernel-modules \
+	"
 
 SPLASH = "psplash-raspberrypi"
 
 IMAGE_FEATURES += "ssh-server-dropbear splash"
+
+do_image_prepend() {
+    bb.warn("The image 'rpi-basic-image' is deprecated, please use 'core-image-base' instead")
+}

recipes-core/images/rpi-hwup-image.bb

@@ -5,3 +5,7 @@ include recipes-core/images/core-image-minimal.bb
 IMAGE_INSTALL += " \
 	kernel-modules \
 	"
+
+do_image_prepend() {
+    bb.warn("The image 'rpi-hwup-image' is deprecated, please use 'core-image-base' instead")
+}

recipes-core/images/rpi-test-image.bb

@@ -1,4 +1,6 @@
-# Base this image on rpi-basic-image
-include rpi-basic-image.bb
+# Base this image on core-image-base
+include recipes-core/images/core-image-base.bb
+
+COMPATIBLE_MACHINE = "^rpi$"
 
 IMAGE_INSTALL_append = " packagegroup-rpi-test"

recipes-core/packagegroups/packagegroup-core-tools-testapps.bbappend

@@ -0,0 +1,2 @@
+# mesa-demos needs gles1 and userland driver does not have it, works ok with vc4 graphics driver
+X11GLTOOLS_remove_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', 'mesa-demos', d)}"

recipes-core/packagegroups/packagegroup-rpi-test.bb

@@ -1,11 +1,15 @@
 DESCRIPTION = "RaspberryPi Test Packagegroup"
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
 
 inherit packagegroup
 
+COMPATIBLE_MACHINE = "^rpi$"
+
+OMXPLAYER  = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', 'omxplayer', d)}"
+
 RDEPENDS_${PN} = "\
-    omxplayer \
+    ${OMXPLAYER} \
     bcm2835-tests \
     wiringpi \
     rpio \

recipes-core/psplash/psplash_%.bbappend

@@ -1,4 +1,3 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
 SPLASH_IMAGES_append_rpi = " file://psplash-raspberrypi-img.h;outsuffix=raspberrypi"
-ALTERNATIVE_PRIORITY_psplash-raspberrypi[psplash] = "10"
-
+ALTERNATIVE_PRIORITY_psplash-raspberrypi[psplash] = "200"

recipes-core/udev/udev-rules-rpi.bb

@@ -1,11 +1,13 @@
 DESCRIPTION = "udev rules for Raspberry Pi Boards"
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
 
 SRC_URI = " file://99-com.rules"
 
 S = "${WORKDIR}"
 
+INHIBIT_DEFAULT_DEPS = "1"
+
 do_install () {
     install -d ${D}${sysconfdir}/udev/rules.d
     install -m 0644 ${WORKDIR}/99-com.rules ${D}${sysconfdir}/udev/rules.d/

recipes-core/udev/udev-rules-udisks-rpi/80-udisks-rpi.rules

@@ -0,0 +1,10 @@
+##############################################################################################################
+
+# Partitions which desktops should not display
+#
+
+# boot partition
+ENV{ID_FS_TYPE}=="vfat", ENV{ID_FS_LABEL}=="raspberrypi", \
+  ENV{UDISKS_PRESENTATION_HIDE}="1", ENV{UDISKS_IGNORE}="1"
+
+##############################################################################################################

recipes-core/udev/udev-rules-udisks-rpi_1.0.bb

@@ -0,0 +1,13 @@
+DESCRIPTION = "add udisk/udev rule to hide boot partition from udev"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
+SRC_URI = "file://80-udisks-rpi.rules"
+
+INHIBIT_DEFAULT_DEPS = "1"
+
+do_install () {
+	install -d ${D}${base_libdir}/udev/rules.d
+	install -m 644 ${WORKDIR}/80-udisks-rpi.rules ${D}${base_libdir}/udev/rules.d
+}
+
+FILES_${PN} = "${base_libdir}/udev/rules.d"

recipes-devtools/bcm2835/bcm2835_1.52.bb

@@ -8,7 +8,7 @@ AUTHOR = "Mike McCauley (mikem@open.com.au)"
 LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
 
-COMPATIBLE_MACHINE = "raspberrypi"
+COMPATIBLE_MACHINE = "^rpi$"
 
 SRC_URI = "http://www.airspayce.com/mikem/bcm2835/bcm2835-${PV}.tar.gz"
 

recipes-devtools/pi-blaster/files/0001-pi-blaster-Include-sys-sysmacros.h-for-makedev.patch

@@ -0,0 +1,32 @@
+From 6a6b705ff5cba960c54bdb4d4bcdaa3b00a854a2 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sat, 11 Aug 2018 10:24:24 -0700
+Subject: [PATCH] pi-blaster: Include sys/sysmacros.h for makedev()
+
+In glibc 2.28+ this header is not included indirectly anymore
+
+fixes
+
+ld: pi-blaster.o: in function `mbox_open':
+pi-blaster.c:(.text+0x28): undefined reference to `makedev'
+collect2: error: ld returned 1 exit status
+
+Upstream-Status: Submitted [https://github.com/sarfata/pi-blaster/pull/100]
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ pi-blaster.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/pi-blaster.c b/pi-blaster.c
+index 6cfd010..fc4e686 100644
+--- a/pi-blaster.c
++++ b/pi-blaster.c
+@@ -41,6 +41,7 @@ static char VERSION[] = "SNAPSHOT";
+ #include <sys/time.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
++#include <sys/sysmacros.h>
+ #include <fcntl.h>
+ #include <sys/mman.h>
+ #include "mailbox.h"

recipes-devtools/pi-blaster/files/remove-initscript-lsb-dependency.patch

@@ -1,13 +1,28 @@
-Remove dependencies on LSB functions
+From 1338f98a279616f4e5e9ea30a25d1dfa0c7df5d6 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Petter=20Mab=C3=A4cker?= <petter@technux.se>
+Date: Sun, 4 Jun 2017 12:22:40 +0200
+Subject: [PATCH] Remove dependencies on LSB functions
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+See this as a rebase of the previous 'Remove dependencies on LSB
+functions patch' with only minor modifications from the original version,
+based on the work done by Alex Lennon <ajlennon@dynamicdevices.co.uk> in
+'25fd817 pi-blaster: Added recipe'.
 
 Upstream-Status: Inappropriate [configuration]
 
-Signed-off-by: Alex Lennon <ajlennon@dynamicdevices.co.uk>
+Signed-off-by: Petter Mabäcker <petter@technux.se>
+---
+ debian/pi-blaster.init | 38 +++++++-------------------------------
+ 1 file changed, 7 insertions(+), 31 deletions(-)
 
-diff -ur git.org/pi-blaster.boot.sh git/pi-blaster.boot.sh
---- git.org/pi-blaster.boot.sh	2014-05-20 14:49:44.378582168 +0100
-+++ git/pi-blaster.boot.sh	2014-05-20 14:51:08.330582386 +0100
-@@ -28,12 +28,12 @@
+diff --git a/debian/pi-blaster.init b/debian/pi-blaster.init
+index b142d70..01a686c 100644
+--- a/debian/pi-blaster.init
++++ b/debian/pi-blaster.init
+@@ -28,12 +28,12 @@ SCRIPTNAME=/etc/init.d/$NAME
  [ -r /etc/default/$NAME ] && . /etc/default/$NAME
  
  # Load the VERBOSE setting and other rcS variables
@@ -22,7 +37,7 @@ diff -ur git.org/pi-blaster.boot.sh git/pi-blaster.boot.sh
  
  #
  # Function that starts the daemon/service
-@@ -77,48 +77,23 @@
+@@ -77,48 +77,24 @@ do_stop()
  
  case "$1" in
    start)
@@ -52,6 +67,7 @@ diff -ur git.org/pi-blaster.boot.sh git/pi-blaster.boot.sh
  	# 'force-reload' alias
  	#
 -	log_daemon_msg "Restarting $DESC" "$NAME"
++	echo "Restarting $DESC" "$NAME"
  	do_stop
 -	case "$?" in
 -	  0|1)
@@ -71,7 +87,10 @@ diff -ur git.org/pi-blaster.boot.sh git/pi-blaster.boot.sh
  	;;
    *)
 -	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
-+	echo "Usage: $SCRIPTNAME {start|stop|restart}" >&2
++	echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
  	exit 3
  	;;
  esac
+-- 
+1.9.1
+

recipes-devtools/pi-blaster/pi-blaster.inc

@@ -1,21 +0,0 @@
-DESCRIPTION = "This project enables PWM on the GPIO pins you request of a Raspberry Pi."
-HOMEPAGE = "https://github.com/sarfata/pi-blaster/"
-SECTION = "devel/libs"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://README.md;beginline=157;endline=170;md5=f20832f31126609af5a7bf2340014540"
-
-SRC_URI = "git://github.com/sarfata/pi-blaster \
-           file://remove-initscript-lsb-dependency.patch \
-"
-
-S = "${WORKDIR}/git"
-
-inherit update-rc.d autotools
-
-INITSCRIPT_PACKAGES = "${PN}"
-INITSCRIPT_NAME_${PN} = "${PN}.boot.sh"
-INITSCRIPT_PARAMS_${PN} = "defaults 15 85"
-
-COMPATIBLE_MACHINE = "raspberrypi"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"

recipes-devtools/pi-blaster/pi-blaster_git.bb

@@ -1,3 +1,24 @@
-require pi-blaster.inc
+DESCRIPTION = "This project enables PWM on the GPIO pins you request of a Raspberry Pi."
+HOMEPAGE = "https://github.com/sarfata/pi-blaster/"
+SECTION = "devel/libs"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://README.md;beginline=244;endline=268;md5=86d10e4bcf4b4014d306dde7c1d2a80d"
 
-SRCREV = "ec5e1b4c6191d8f9a538497dbbb86f9cf0de7016"
+SRC_URI = "git://github.com/sarfata/pi-blaster \
+           file://remove-initscript-lsb-dependency.patch \
+           file://0001-pi-blaster-Include-sys-sysmacros.h-for-makedev.patch \
+           "
+
+S = "${WORKDIR}/git"
+
+SRCREV = "e981aa5d7624c75a4d4afcddcbd235f25e32ffe4"
+
+inherit update-rc.d autotools
+
+INITSCRIPT_PACKAGES = "${PN}"
+INITSCRIPT_NAME_${PN} = "${PN}.boot.sh"
+INITSCRIPT_PARAMS_${PN} = "defaults 15 85"
+
+COMPATIBLE_MACHINE = "^rpi$"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"

recipes-devtools/python/python-sense-hat_2.2.0.bb

@@ -4,16 +4,12 @@ SECTION = "devel/python"
 LICENSE = "BSD"
 LIC_FILES_CHKSUM = "file://LICENCE.txt;md5=d80fe312e1ff5fbd97369b093bf21cda"
 
-SRCNAME = "sense-hat"
+inherit setuptools pypi
 
-SRC_URI = "https://pypi.python.org/packages/source/s/${SRCNAME}/${SRCNAME}-${PV}.tar.gz"
+PYPI_PACKAGE = "sense-hat"
 
-SRC_URI[md5sum] = "71217f15ea963040f06e2f50722186ca"
-SRC_URI[sha256sum] = "c6c76707c0ea514e4b0f1f96f1b5b79755875891aae037df7434b6aad7b9dbca"
-
-S = "${WORKDIR}/${SRCNAME}-${PV}"
-
-inherit setuptools
+SRC_URI[md5sum] = "69929250cb72349a8a82edf2584b1d83"
+SRC_URI[sha256sum] = "f000998d042d96ed722d459312e1bebd0107f9f3015cd34b3e4fabcab9c800af"
 
 DEPENDS += " \
     jpeg \

recipes-devtools/python/rpi-gpio_0.6.2.bb

@@ -1,21 +0,0 @@
-DESCRIPTION = "A module to control Raspberry Pi GPIO channels"
-HOMEPAGE = "http://code.google.com/p/raspberry-gpio-python/"
-SECTION = "devel/python"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://LICENCE.txt;md5=9b95630a648966b142f1a0dcea001cb7"
-
-SRCNAME = "RPi.GPIO"
-
-SRC_URI = "\
-          http://pypi.python.org/packages/source/R/RPi.GPIO/${SRCNAME}-${PV}.tar.gz \
-          file://0001-Remove-nested-functions.patch \
-          "
-SRC_URI[md5sum] = "9db86fd5f3bae872de9dbb068ee0b096"
-SRC_URI[sha256sum] = "82acff0ef6bbe3cdf6f4dbdd73d96add5294bb94baf7f51c1d901861af3c2392"
-
-S = "${WORKDIR}/${SRCNAME}-${PV}"
-
-inherit distutils
-
-COMPATIBLE_MACHINE = "raspberrypi"
-

recipes-devtools/python/rpi-gpio_0.6.3.bb

@@ -0,0 +1,14 @@
+DESCRIPTION = "A module to control Raspberry Pi GPIO channels"
+HOMEPAGE = "http://code.google.com/p/raspberry-gpio-python/"
+SECTION = "devel/python"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://LICENCE.txt;md5=9b95630a648966b142f1a0dcea001cb7"
+
+PYPI_PACKAGE = "RPi.GPIO"
+inherit pypi distutils
+
+SRC_URI += "file://0001-Remove-nested-functions.patch"
+SRC_URI[md5sum] = "e4abe1cfb5eacebe53078032256eb837"
+SRC_URI[sha256sum] = "a5fc0eb5e401963b6c0a03650da6b42c4005f02d962b81241d96c98d0a578516"
+
+COMPATIBLE_MACHINE = "^rpi$"

recipes-devtools/python/rpio_0.10.0.bb

@@ -5,16 +5,19 @@ SECTION = "devel/python"
 LICENSE = "LGPLv3+"
 LIC_FILES_CHKSUM = "file://README.rst;beginline=41;endline=53;md5=d5d95d7486a4d98c999675c23196b25a"
 
-SRCNAME = "RPIO"
+PYPI_PACKAGE = "RPIO"
+inherit pypi
 
-SRC_URI = "http://pypi.python.org/packages/source/R/RPIO/${SRCNAME}-${PV}.tar.gz \
-           file://0001-include-sys-types.h-explicitly-for-getting-caddr_t-d.patch \
-           "
-S = "${WORKDIR}/${SRCNAME}-${PV}"
+SRC_URI += "file://0001-include-sys-types.h-explicitly-for-getting-caddr_t-d.patch"
 
 inherit setuptools
 
-COMPATIBLE_MACHINE = "raspberrypi"
+COMPATIBLE_MACHINE = "^rpi$"
+
+RDEPENDS_${PN} = "\
+    python-logging \
+    python-threading \
+"
 
 SRC_URI[md5sum] = "cefc45422833dcafcd59b78dffc540f4"
 SRC_URI[sha256sum] = "b89f75dec9de354681209ebfaedfe22b7c178aacd91a604a7bd6d92024e4cf7e"

recipes-devtools/raspi-gpio/raspi-gpio_git.bb

@@ -0,0 +1,16 @@
+DESCRIPTION = "Tool to help debug / hack at the BCM283x GPIO"
+HOMEPAGE = "https://github.com/RPi-Distro/raspi-gpio"
+SECTION = "devel/libs"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=a14affa234debc057b47cdca615b2192"
+
+COMPATIBLE_MACHINE = "^rpi$"
+
+inherit autotools
+
+SRCREV = "2df7b8684e2e36b080cda315d78d5ba16f8f18b0"
+SRC_URI = "git://github.com/RPi-Distro/raspi-gpio.git;protocol=https;branch=master \
+          "
+
+S = "${WORKDIR}/git"
+

recipes-devtools/wiringpi/files/0001-Add-initial-cross-compile-support.patch

@@ -1,29 +1,33 @@
-From 4ed727aa9e528f130fdc8798df771037a1f22fc9 Mon Sep 17 00:00:00 2001
-From: Andrea Galbusera <gizero@gmail.com>
-Date: Mon, 3 Apr 2017 14:48:14 +0200
-Subject: [PATCH] =?UTF-8?q?Add=20initial=20cross=20compile=20support=20(re?=
- =?UTF-8?q?base=20from=20Petter=20Mab=C3=A4cker=20<petter@technux.se>=20ve?=
- =?UTF-8?q?rsion)?=
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
+From 32f3cad3c41161693659a902062fa0c01c0338ed Mon Sep 17 00:00:00 2001
+From: ErikHH <erik.hoogeveen@outlook.com>
+Date: Thu, 20 Dec 2018 15:33:45 +0100
+Subject: [PATCH 1/1] Add initial cross compile support
 
+Signed-off-by: ErikHH <erik.hoogeveen@outlook.com>
 ---
- devLib/Makefile             | 54 +++++++++++++++++++++++++--------------------
- examples/Gertboard/Makefile | 20 +++++++++++------
- examples/Makefile           | 20 +++++++++++------
- examples/PiFace/Makefile    | 20 +++++++++++------
- examples/PiGlow/Makefile    |  4 ++--
- examples/q2w/Makefile       |  4 ++--
- gpio/Makefile               | 29 ++++++++++++------------
- wiringPi/Makefile           | 50 +++++++++++++++++++++++------------------
- 8 files changed, 116 insertions(+), 85 deletions(-)
+ devLib/Makefile             | 55 +++++++++++++++++++++----------------
+ examples/Gertboard/Makefile | 22 +++++++++------
+ examples/Makefile           | 22 +++++++++------
+ examples/PiFace/Makefile    | 22 +++++++++------
+ examples/PiGlow/Makefile    |  4 +--
+ examples/q2w/Makefile       |  4 +--
+ gpio/Makefile               | 29 +++++++++----------
+ wiringPi/Makefile           | 47 +++++++++++++++++--------------
+ 8 files changed, 119 insertions(+), 86 deletions(-)
 
 diff --git a/devLib/Makefile b/devLib/Makefile
-index cf665d6..040c03a 100644
+index cf665d6..d193a9d 100644
 --- a/devLib/Makefile
 +++ b/devLib/Makefile
-@@ -31,15 +31,19 @@ ifneq ($V,1)
+@@ -22,6 +22,7 @@
+ #################################################################################
+ 
+ VERSION=$(shell cat ../VERSION)
++DYN_VERS_MAJ=$(word 1,$(subst ., ,$(VERSION)))
+ DESTDIR?=/usr
+ PREFIX?=/local
+ 
+@@ -31,15 +32,19 @@ ifneq ($V,1)
  Q ?= @
  endif
  
@@ -51,7 +55,7 @@ index cf665d6..040c03a 100644
  
  LIBS    =
  
-@@ -68,16 +72,16 @@ $(STATIC):	$(OBJ)
+@@ -68,16 +73,16 @@ $(STATIC):	$(OBJ)
  
  $(DYNAMIC):	$(OBJ)
  	$Q echo "[Link (Dynamic)]"
@@ -71,7 +75,7 @@ index cf665d6..040c03a 100644
  
  .PHONY:	tags
  tags:	$(SRC)
-@@ -88,22 +92,22 @@ tags:	$(SRC)
+@@ -88,22 +93,22 @@ tags:	$(SRC)
  .PHONY:	install
  install:	$(DYNAMIC)
  	$Q echo "[Install Headers]"
@@ -104,7 +108,7 @@ index cf665d6..040c03a 100644
  
  .PHONY:	install-deb
  install-deb:	$(DYNAMIC)
-@@ -118,9 +122,11 @@ install-deb:	$(DYNAMIC)
+@@ -118,9 +123,11 @@ install-deb:	$(DYNAMIC)
  .PHONY:	uninstall
  uninstall:
  	$Q echo "[UnInstall]"
@@ -132,11 +136,12 @@ index 1939ad6..98d1415 100644
 -CC	= gcc
 -INCLUDE	= -I/usr/local/include
 -CFLAGS	= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
-+DESTDIR?=/usr
-+PREFIX?=/local
- 
+-
 -LDFLAGS	= -L/usr/local/lib
 -LDLIBS    = -lwiringPi -lwiringPiDev -lpthread -lm
++DESTDIR?=/usr
++PREFIX?=/local
++
 +INCLUDE_DIR?=$(DESTDIR)$(PREFIX)/include
 +LIB_DIR?=$(DESTDIR)$(PREFIX)/lib
 +
@@ -164,11 +169,12 @@ index 6d87885..8623816 100644
 -CC	= gcc
 -INCLUDE	= -I/usr/local/include
 -CFLAGS	= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
-+DESTDIR?=/usr
-+PREFIX?=/local
- 
+-
 -LDFLAGS	= -L/usr/local/lib
 -LDLIBS    = -lwiringPi -lwiringPiDev -lpthread -lm -lcrypt -lrt
++DESTDIR?=/usr
++PREFIX?=/local
++
 +INCLUDE_DIR?=$(DESTDIR)$(PREFIX)/include
 +LIB_DIR?=$(DESTDIR)$(PREFIX)/lib
 +
@@ -196,11 +202,12 @@ index f937c14..ad030b3 100644
 -CC	= gcc
 -INCLUDE	= -I/usr/local/include
 -CFLAGS	= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
-+DESTDIR?=/usr
-+PREFIX?=/local
- 
+-
 -LDFLAGS	= -L/usr/local/lib
 -LDLIBS    = -lwiringPi -lwiringPiDev -lpthread -lm
++DESTDIR?=/usr
++PREFIX?=/local
++
 +INCLUDE_DIR?=$(DESTDIR)$(PREFIX)/include
 +LIB_DIR?=$(DESTDIR)$(PREFIX)/lib
 +
@@ -250,7 +257,7 @@ index 8f773bf..14aa6e4 100644
  
  ###############################################################################
 diff --git a/gpio/Makefile b/gpio/Makefile
-index f41a005..22753ee 100644
+index 9ec160d..a294242 100644
 --- a/gpio/Makefile
 +++ b/gpio/Makefile
 @@ -30,13 +30,17 @@ ifneq ($V,1)
@@ -286,8 +293,8 @@ index f41a005..22753ee 100644
 -	$Q chown root.root	$(DESTDIR)$(PREFIX)/bin/gpio
 -	$Q chmod 4755		$(DESTDIR)$(PREFIX)/bin/gpio
 -endif
--	$Q mkdir -p		$(DESTDIR)$(PREFIX)/man/man1
--	$Q cp gpio.1		$(DESTDIR)$(PREFIX)/man/man1
+-	$Q mkdir -p		$(DESTDIR)$(PREFIX)/share/man/man1
+-	$Q cp gpio.1		$(DESTDIR)$(PREFIX)/share/man/man1
 +	$Q install -d $(BIN_DIR)
 +	$Q install -m 4755 -o root -g root gpio $(BIN_DIR)
 +	$Q install -d $(DESTDIR)$(PREFIX)/share/man/man1
@@ -301,14 +308,18 @@ index f41a005..22753ee 100644
  	$Q echo "[UnInstall]"
 -	$Q rm -f $(DESTDIR)$(PREFIX)/bin/gpio
 +	$Q rm -f $(BIN_DIR)/gpio
- 	$Q rm -f $(DESTDIR)$(PREFIX)/man/man1/gpio.1
+ 	$Q rm -f $(DESTDIR)$(PREFIX)/share/man/man1/gpio.1
  
  .PHONY:	depend
 diff --git a/wiringPi/Makefile b/wiringPi/Makefile
-index e1868b9..e39f75a 100644
+index 287fa58..3423d3f 100644
 --- a/wiringPi/Makefile
 +++ b/wiringPi/Makefile
-@@ -25,19 +25,23 @@ VERSION=$(shell cat ../VERSION)
+@@ -22,25 +22,30 @@
+ #################################################################################
+ 
+ VERSION=$(shell cat ../VERSION)
++DYN_VERS_MAJ=$(word 1,$(subst ., ,$(VERSION)))
  DESTDIR?=/usr
  PREFIX?=/local
  
@@ -336,19 +347,24 @@ index e1868b9..e39f75a 100644
 +CC	?= gcc
 +INCLUDE	?= -I.
  DEFS	= -D_GNU_SOURCE
- CFLAGS	= $(DEBUG) $(DEFS) -Wformat=2 -Wall -Wextra -Winline $(INCLUDE) -pipe -fPIC
+-CFLAGS	= $(DEBUG) $(DEFS) -Wformat=2 -Wall -Wextra -Winline $(INCLUDE) -pipe -fPIC
+-#CFLAGS	= $(DEBUG) $(DEFS) -Wformat=2 -Wall -Wextra -Wconversion -Winline $(INCLUDE) -pipe -fPIC
++CFLAGS	= $(DEBUG) $(DEFS) $(INCLUDE) -Wformat=2 -Wall -Wextra -Winline -pipe -fPIC
++#CFLAGS	= $(DEBUG) $(DEFS) $(INCLUDE) -Wformat=2 -Wall -Wextra -Wconversion -Winline -pipe -fPIC
  
-@@ -78,17 +82,17 @@ $(STATIC):	$(OBJ)
+ LIBS    = -lm -lpthread -lrt -lcrypt
+ 
+@@ -75,17 +80,17 @@ static:
  
  $(DYNAMIC):	$(OBJ)
  	$Q echo "[Link (Dynamic)]"
 -	$Q $(CC) -shared -Wl,-soname,libwiringPi.so$(WIRINGPI_SONAME_SUFFIX) -o libwiringPi.so.$(VERSION) $(LIBS) $(OBJ)
-+	$Q $(CC) $(LDFLAGS) -shared -Wl,-soname,$(BASE_NAME).so.$(DYN_VERS_MAJ) -o $(BASE_NAME).so $(LIBS) $(OBJ)
++	$Q $(CC) $(LDFLAGS) -shared -Wl,-soname,$(BASE_NAME).so.$(DYN_VERS_MAJ) -o $(BASE_NAME).so $(OBJ) $(LIBS)
  
  .c.o:
  	$Q echo [Compile] $<
 -	$Q $(CC) -c $(CFLAGS) $< -o $@
-+	$Q $(CC) -c $(CFLAGS) -fPIC $< -o $@
++	$Q $(CC) $(CFLAGS) $(LIBS) -c $< -o $@
  
  
  .PHONY:	clean
@@ -359,7 +375,7 @@ index e1868b9..e39f75a 100644
  
  .PHONY:	tags
  tags:	$(SRC)
-@@ -99,22 +103,22 @@ tags:	$(SRC)
+@@ -96,13 +101,13 @@ tags:	$(SRC)
  .PHONY:	install
  install:	$(DYNAMIC)
  	$Q echo "[Install Headers]"
@@ -377,22 +393,9 @@ index e1868b9..e39f75a 100644
 +	$Q ln -sf $(DYNAMIC)						$(LIB_DIR)/$(BASE_NAME).so
 +	$Q ln -sf $(DYNAMIC)						$(LIB_DIR)/$(BASE_NAME).so.$(DYN_VERS_MAJ)
  
- .PHONY:	install-static
- install-static:	$(STATIC)
- 	$Q echo "[Install Headers]"
--	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/include
--	$Q install -m 0644 $(HEADERS)					$(DESTDIR)$(PREFIX)/include
-+	$Q install -m 0755 -d						$(INCLUDE_DIR)
-+	$Q install -m 0644 $(HEADERS)					$(INCLUDE_DIR)
- 	$Q echo "[Install Static Lib]"
--	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/lib
--	$Q install -m 0755 libwiringPi.a					$(DESTDIR)$(PREFIX)/lib
-+	$Q install -m 0755 -d						$(LIB_DIR)
-+	$Q install -m 0755 $(STATIC)					$(LIB_DIR)
- 
  .PHONY:	install-deb
  install-deb:	$(DYNAMIC)
-@@ -129,9 +133,11 @@ install-deb:	$(DYNAMIC)
+@@ -117,9 +122,11 @@ install-deb:	$(DYNAMIC)
  .PHONY:	uninstall
  uninstall:
  	$Q echo "[UnInstall]"
@@ -408,5 +411,5 @@ index e1868b9..e39f75a 100644
  
  .PHONY:	depend
 -- 
-2.7.4
+2.19.1
 

recipes-devtools/wiringpi/wiringpi_git.bb

@@ -4,8 +4,10 @@ SECTION = "devel/libs"
 LICENSE = "LGPLv3+"
 LIC_FILES_CHKSUM = "file://COPYING.LESSER;md5=e6a600fd5e1d9cbde2d983680233ad02"
 
-# tag 2.44
-SRCREV = "96344ff7125182989f98d3be8d111952a8f74e15"
+DEPENDS += "virtual/crypt"
+
+# tag 2.46
+SRCREV = "8d188fa0e00bb8c6ff6eddd07bf92857e9bd533a"
 
 S = "${WORKDIR}/git"
 
@@ -13,7 +15,7 @@ SRC_URI = "git://git.drogon.net/wiringPi \
            file://0001-Add-initial-cross-compile-support.patch \
            "
 
-COMPATIBLE_MACHINE = "raspberrypi"
+COMPATIBLE_MACHINE = "^rpi$"
 
 CFLAGS_prepend = "-I${S}/wiringPi -I${S}/devLib "
 

recipes-graphics/eglinfo/eglinfo-fb_%.bbappend

@@ -1,2 +1,2 @@
 EGLINFO_DEVICE_rpi  = "raspberrypi"
-COMPATIBLE_HOST_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', 'null', '"(.*)"', d)}"
+COMPATIBLE_HOST_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', 'null', '(.*)', d)}"

recipes-graphics/kmscube/kmscube_%.bbappend

@@ -0,0 +1,2 @@
+# userland driver EGL implementation does not have all needed bits for it so remove it from build
+COMPATIBLE_HOST_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '(.*)', 'null', d)}"

recipes-graphics/mesa/mesa-demos_%.bbappend

@@ -0,0 +1,2 @@
+# mesa-demos need libgles1 and userland driver does not have it
+COMPATIBLE_HOST_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '(.*)', 'null', d)}"

recipes-graphics/mesa/mesa_%.bbappend

@@ -1,3 +1,7 @@
-PACKAGECONFIG_append_rpi = " gallium"
-GALLIUMDRIVERS_rpi = "vc4"
+# DRI3 note:
+# With oe-core commit 8509e2e1a87578882b71948ccef3b50ccf1228b3 dri3 is set
+# as default. To state out clearly that Raspi needs dri3 and to avoid surprises
+# in case oe-core changes this default, we set dri3 explicitly.
+PACKAGECONFIG_append_rpi = " gallium ${@bb.utils.contains('DISTRO_FEATURES', 'x11 opengl', 'x11 dri3', '', d)}"
+GALLIUMDRIVERS_append_rpi = ",vc4"
 DRIDRIVERS_rpi = ""

recipes-graphics/piglit/piglit_%.bbappend

@@ -0,0 +1,5 @@
+# mesa-demos need libgles1 and userland driver does not have it so remove it from piglit rdeps
+RDEPENDS_${PN}_remove_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', 'mesa-demos', d)}"
+# it needs EGL >= 11 but userland says it provided version 10, remove it from build
+# | --   Requested 'egl >= 11.0' but version of EGL is 10
+COMPATIBLE_HOST_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '(.*)', 'null', d)}"

recipes-graphics/userland/files/0001-Allow-applications-to-set-next-resource-handle.patch

@@ -1,7 +1,7 @@
-From f6540119d5b064361ffcb370373794932f97bfdd Mon Sep 17 00:00:00 2001
+From 08d56c1174e27573ae8df2a7b9e6632afd0bfe86 Mon Sep 17 00:00:00 2001
 From: Dom Cobley <dc4@broadcom.com>
 Date: Tue, 9 Jul 2013 09:26:26 -0400
-Subject: [PATCH 01/13] Allow applications to set next resource handle
+Subject: [PATCH 01/18] Allow applications to set next resource handle
 
 This patch adds provisions in userland to
 let apps callers set the next rendereing dispmanx resource.
@@ -9,10 +9,10 @@ It's useful for implementing, say, a buffer carousel.
 ---
  interface/khronos/common/khrn_client_rpc.h |  2 ++
  interface/khronos/common/khrn_int_ids.h    |  2 ++
- interface/khronos/egl/egl_client.c         | 30 +++++++++++++++++++++++++++---
- interface/khronos/egl/egl_client_surface.c | 24 +++++++++++++++++++++++-
+ interface/khronos/egl/egl_client.c         | 30 +++++++++++++++++++---
+ interface/khronos/egl/egl_client_surface.c | 24 ++++++++++++++++-
  interface/khronos/egl/egl_client_surface.h |  3 ++-
- interface/khronos/egl/egl_int_impl.h       |  5 +++--
+ interface/khronos/egl/egl_int_impl.h       |  5 ++--
  6 files changed, 59 insertions(+), 7 deletions(-)
 
 diff --git a/interface/khronos/common/khrn_client_rpc.h b/interface/khronos/common/khrn_client_rpc.h
@@ -204,5 +204,5 @@ index 8a5734c..51b3580 100644
  
  FN(void, eglIntGetColorData_impl, (EGL_SURFACE_ID_T s, KHRN_IMAGE_FORMAT_T format, uint32_t width, uint32_t height, int32_t stride, uint32_t y_offset, void *data))
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0002-wayland-Add-support-for-the-Wayland-winsys.patch

@@ -1,7 +1,7 @@
-From 61a9d792ed774af43e592aa8fdb2a18488696d0f Mon Sep 17 00:00:00 2001
+From da60a2a34a48e2b324fceae608964814488cc8fb Mon Sep 17 00:00:00 2001
 From: Tomeu Vizoso <tomeu.vizoso@collabora.com>
 Date: Tue, 1 Oct 2013 13:19:20 +0200
-Subject: [PATCH 02/13] wayland: Add support for the Wayland winsys
+Subject: [PATCH 02/18] wayland: Add support for the Wayland winsys
 
 * Adds EGL_WL_bind_wayland_display extension
 * Adds wayland-egl library
@@ -16,38 +16,40 @@ a DispmanX display from the clients.
 TODO: wl_dispmanx_server_buffer should probably be defined in a
 private header that can be included from EGL and vc_* instead of in
 vc_vchi_dispmanx.h
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
 ---
- .gitignore                                         |   2 +
+ .gitignore                                    |   1 +
  CMakeLists.txt                                |  11 +
  README.md                                     |   4 +
  buildme                                       |  10 +-
  .../linux/apps/raspicam/CMakeLists.txt        |   2 +-
- interface/khronos/CMakeLists.txt                   |  53 ++++-
+ interface/khronos/CMakeLists.txt              |  54 +++-
  interface/khronos/common/khrn_client.c        |  15 ++
  interface/khronos/common/khrn_client.h        |  10 +
  interface/khronos/common/khrn_client_mangle.h |   3 +
- interface/khronos/common/khrn_client_platform.h    |   8 +
- interface/khronos/common/khrn_client_unmangle.h    |   3 +
- .../common/linux/khrn_client_platform_linux.c      | 115 ++++++++--
- interface/khronos/common/linux/khrn_wayland.c      | 215 ++++++++++++++++++
+ .../khronos/common/khrn_client_platform.h     |   8 +
+ .../khronos/common/khrn_client_unmangle.h     |   3 +
+ .../common/linux/khrn_client_platform_linux.c | 115 +++++++-
+ interface/khronos/common/linux/khrn_wayland.c | 215 +++++++++++++++
  .../common/linux/khrn_wayland.h}              |  46 +---
- interface/khronos/egl/egl_client.c                 |  92 +++++---
+ interface/khronos/egl/egl_client.c            |  92 +++++--
  interface/khronos/egl/egl_client_get_proc.c   |  11 +
- interface/khronos/egl/egl_client_surface.c         |  42 +++-
- interface/khronos/egl/egl_client_surface.h         |  38 +++-
+ interface/khronos/egl/egl_client_surface.c    |  42 ++-
+ interface/khronos/egl/egl_client_surface.h    |  38 ++-
  interface/khronos/egl/egl_int_impl.h          |   2 +-
- interface/khronos/ext/egl_wayland.c                | 246 +++++++++++++++++++++
+ interface/khronos/ext/egl_wayland.c           | 246 ++++++++++++++++++
  interface/khronos/include/EGL/eglext.h        |  23 ++
- interface/khronos/wayland-egl/wayland-egl-priv.h   |  53 +++++
+ .../khronos/wayland-egl/wayland-egl-priv.h    |  53 ++++
  interface/khronos/wayland-egl/wayland-egl.c   |  59 +++++
- interface/khronos/wayland-egl/wayland-egl.pc.in    |  10 +
+ .../khronos/wayland-egl/wayland-egl.pc.in     |  10 +
  interface/vmcs_host/CMakeLists.txt            |  21 +-
  interface/vmcs_host/vc_dispmanx.h             |  10 +
- interface/vmcs_host/vc_vchi_dispmanx.c             |  42 ++++
+ interface/vmcs_host/vc_vchi_dispmanx.c        |  42 +++
  interface/vmcs_host/vc_vchi_dispmanx.h        |  15 ++
- interface/wayland/dispmanx.xml                     | 123 +++++++++++
- makefiles/cmake/Wayland.cmake                      |  72 ++++++
- 30 files changed, 1258 insertions(+), 98 deletions(-)
+ interface/wayland/dispmanx.xml                | 123 +++++++++
+ makefiles/cmake/Wayland.cmake                 |  72 +++++
+ 30 files changed, 1257 insertions(+), 99 deletions(-)
  create mode 100644 interface/khronos/common/linux/khrn_wayland.c
  copy interface/{vmcs_host/vc_vchi_dispmanx.h => khronos/common/linux/khrn_wayland.h} (56%)
  create mode 100644 interface/khronos/ext/egl_wayland.c
@@ -58,14 +60,13 @@ vc_vchi_dispmanx.h
  create mode 100644 makefiles/cmake/Wayland.cmake
 
 diff --git a/.gitignore b/.gitignore
-index 4a88665..5da71a9 100644
+index 63570f1..1459436 100644
 --- a/.gitignore
 +++ b/.gitignore
-@@ -13,3 +13,5 @@ build/
- *.lai
- *.la
- *.a
-+
+@@ -30,3 +30,4 @@ build/
+ *.pts
+ *.ppm
+ *.mkv
 +*~
 diff --git a/CMakeLists.txt b/CMakeLists.txt
 index cfc8ae5..673a5ad 100644
@@ -90,13 +91,13 @@ index cfc8ae5..673a5ad 100644
  
  # Global include paths
 diff --git a/README.md b/README.md
-index 358d2b4..4da4448 100644
+index 94b93b8..50b90b1 100644
 --- a/README.md
 +++ b/README.md
-@@ -4,3 +4,7 @@ EGL, mmal, GLESv2, vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.
- 
- Use buildme to build. It requires cmake to be installed and an arm cross compiler. It is set up to use this one:
+@@ -6,3 +6,7 @@ Use buildme to build. It requires cmake to be installed and an arm cross compile
  https://github.com/raspberrypi/tools/tree/master/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian
+ 
+ Note that this repository does not contain the source for the edid_parser and vcdbg binaries due to licensing restrictions.
 +
 +To build support for the Wayland winsys in EGL, execute the buildme script like this:
 +
@@ -132,20 +133,20 @@ index b8fd440..a780bb6 100755
  
  	if [ "$1" != "" ]; then
 diff --git a/host_applications/linux/apps/raspicam/CMakeLists.txt b/host_applications/linux/apps/raspicam/CMakeLists.txt
-index e6aa6b8..69059cb 100644
+index 42636e8..d47ad55 100644
 --- a/host_applications/linux/apps/raspicam/CMakeLists.txt
 +++ b/host_applications/linux/apps/raspicam/CMakeLists.txt
-@@ -28,7 +28,7 @@ add_executable(raspividyuv  ${COMMON_SOURCES} RaspiVidYUV.c)
+@@ -33,7 +33,7 @@ add_executable(raspividyuv  ${COMMON_SOURCES} RaspiVidYUV.c)
  
  set (MMAL_LIBS mmal_core mmal_util mmal_vc_client)
  
--target_link_libraries(raspistill ${MMAL_LIBS} vcos bcm_host brcmGLESv2 brcmEGL m)
-+target_link_libraries(raspistill ${MMAL_LIBS} vcos bcm_host brcmGLESv2 brcmEGL m ${WAYLAND_SERVER_LIBRARIES} ${WAYLAND_CLIENT_LIBRARIES})
+-target_link_libraries(raspistill ${MMAL_LIBS} vcos bcm_host brcmGLESv2 brcmEGL m dl)
++target_link_libraries(raspistill ${MMAL_LIBS} vcos bcm_host brcmGLESv2 brcmEGL m dl ${WAYLAND_SERVER_LIBRARIES} ${WAYLAND_CLIENT_LIBRARIES})
  target_link_libraries(raspiyuv   ${MMAL_LIBS} vcos bcm_host)
  target_link_libraries(raspivid   ${MMAL_LIBS} vcos bcm_host)
  target_link_libraries(raspividyuv   ${MMAL_LIBS} vcos bcm_host)
 diff --git a/interface/khronos/CMakeLists.txt b/interface/khronos/CMakeLists.txt
-index 9ad615b..3d3571a 100644
+index 9ad615b..95c0e11 100644
 --- a/interface/khronos/CMakeLists.txt
 +++ b/interface/khronos/CMakeLists.txt
 @@ -6,6 +6,12 @@
@@ -161,7 +162,7 @@ index 9ad615b..3d3571a 100644
  set(EGL_SOURCE
     egl/egl_client_config.c
     egl/egl_client_context.c
-@@ -55,12 +61,56 @@ set(CLIENT_SOURCE
+@@ -55,12 +61,55 @@ set(CLIENT_SOURCE
     common/khrn_int_hash_asm.s
     common/khrn_client_cache.c)
  
@@ -169,8 +170,7 @@ index 9ad615b..3d3571a 100644
 +   khrn_client
 +   vchiq_arm
 +   vcos
-+   bcm_host
-+   -lm)
++   bcm_host)
 +
 +if (BUILD_WAYLAND)
 +   set(EGL_SOURCE
@@ -218,16 +218,25 @@ index 9ad615b..3d3571a 100644
  # TODO do we need EGL_static and GLESv2_static now that khrn_static exists?
  add_library(EGL_static STATIC ${EGL_SOURCE})
  add_library(GLESv2_static STATIC ${GLES_SOURCE})
-@@ -72,8 +122,7 @@ include_directories (../../host_applications/linux/libs/sm )
+@@ -72,8 +121,7 @@ include_directories (../../host_applications/linux/libs/sm )
  set(VCSM_LIBS vcsm)
  add_definitions(-DKHRONOS_HAVE_VCSM)
  endif()
 -
 -target_link_libraries(EGL khrn_client vchiq_arm vcos bcm_host ${VCSM_LIBS} -lm)
-+target_link_libraries(EGL ${EGL_LIBS} ${VCSM_LIBS})
++target_link_libraries(EGL ${EGL_LIBS} ${VCSM_LIBS} -lm)
  target_link_libraries(GLESv2 EGL khrn_client vcos)
  target_link_libraries(WFC EGL)
  target_link_libraries(OpenVG EGL)
+@@ -87,7 +135,7 @@ add_library(brcmGLESv2 ${SHARED} ${GLES_SOURCE})
+ add_library(brcmOpenVG ${SHARED} ${VG_SOURCE})
+ add_library(brcmWFC ${SHARED} ${WFC_SOURCE})
+ 
+-target_link_libraries(brcmEGL khrn_client vchiq_arm vcos bcm_host ${VCSM_LIBS} -lm)
++target_link_libraries(brcmEGL ${EGL_LIBS} ${VCSM_LIBS} -lm)
+ target_link_libraries(brcmGLESv2 brcmEGL khrn_client vcos)
+ target_link_libraries(brcmWFC brcmEGL)
+ target_link_libraries(brcmOpenVG brcmEGL)
 diff --git a/interface/khronos/common/khrn_client.c b/interface/khronos/common/khrn_client.c
 index ef4babd..d7e798e 100644
 --- a/interface/khronos/common/khrn_client.c
@@ -808,16 +817,16 @@ index b8bb374..03fe67b 100644
  /*
  TODO: do an RPC call to make sure the Khronos vll is loaded (and that it stays loaded until eglTerminate)
  Also affects global image (and possibly others?)
-@@ -451,6 +444,9 @@ EGLAPI const char EGLAPIENTRY * eglQueryString(EGLDisplay dpy, EGLint name)
+@@ -450,6 +443,9 @@ EGLAPI const char EGLAPIENTRY * eglQueryString(EGLDisplay dpy, EGLint name)
+ #ifdef EGL_KHR_fence_sync
              "EGL_KHR_fence_sync "
  #endif
- #endif
++#endif
 +#if EGL_WL_bind_wayland_display
 +            "EGL_WL_bind_wayland_display "
-+#endif
+ #endif
              ;
           break;
-       case EGL_VENDOR:
 @@ -655,8 +651,7 @@ EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig c
                                  false,
                                  EGL_NO_TEXTURE,
@@ -1885,5 +1894,5 @@ index 0000000..ad90d30
 +    set(${_sources} ${${_sources}} PARENT_SCOPE)
 +endfunction()
 -- 
-2.12.2
+2.19.1
 

recipes-graphics/userland/files/0003-wayland-Add-Wayland-example.patch

@@ -1,16 +1,16 @@
-From 08679675740d92f022e0fd46207a42589c9f6c51 Mon Sep 17 00:00:00 2001
+From 976cc9355fe18487cd84e313e76f397ab47a4bf8 Mon Sep 17 00:00:00 2001
 From: Tomeu Vizoso <tomeu.vizoso@collabora.com>
 Date: Tue, 1 Oct 2013 13:19:20 +0200
-Subject: [PATCH 03/13] wayland: Add Wayland example
+Subject: [PATCH 03/18] wayland: Add Wayland example
 
 ---
  .../linux/apps/hello_pi/CMakeLists.txt        |   1 +
- .../apps/hello_pi/hello_wayland/CMakeLists.txt     |   8 +
- .../apps/hello_pi/hello_wayland/Djenne_128_128.raw |   3 +
- .../linux/apps/hello_pi/hello_wayland/Makefile     |   5 +
- .../hello_wayland/cube_texture_and_coords.h        | 100 ++++
- .../linux/apps/hello_pi/hello_wayland/triangle.c   | 666 +++++++++++++++++++++
- host_applications/linux/apps/hello_pi/rebuild.sh   |   3 +-
+ .../hello_pi/hello_wayland/CMakeLists.txt     |   8 +
+ .../hello_pi/hello_wayland/Djenne_128_128.raw |   3 +
+ .../apps/hello_pi/hello_wayland/Makefile      |   5 +
+ .../hello_wayland/cube_texture_and_coords.h   | 100 +++
+ .../apps/hello_pi/hello_wayland/triangle.c    | 666 ++++++++++++++++++
+ .../linux/apps/hello_pi/rebuild.sh            |   3 +-
  7 files changed, 785 insertions(+), 1 deletion(-)
  create mode 100644 host_applications/linux/apps/hello_pi/hello_wayland/CMakeLists.txt
  create mode 100644 host_applications/linux/apps/hello_pi/hello_wayland/Djenne_128_128.raw
@@ -862,5 +862,5 @@ index 8225dd5..0be6ce7 100755
 -
 +make -C hello_wayland
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0004-wayland-egl-Add-bcm_host-to-dependencies.patch

@@ -1,7 +1,7 @@
-From eb9d0eb386b9b3df519a299887b45962c03e732c Mon Sep 17 00:00:00 2001
+From c379bd2dc575256084d9e36fc11a347e20660130 Mon Sep 17 00:00:00 2001
 From: Khem Raj <raj.khem@gmail.com>
 Date: Mon, 10 Aug 2015 02:38:27 -0700
-Subject: [PATCH 04/13] wayland-egl: Add bcm_host to dependencies
+Subject: [PATCH 04/18] wayland-egl: Add bcm_host to dependencies
 
 It uses headers like vcos_platform_types.h but does not
 depend on module which should add the required include paths
@@ -24,5 +24,5 @@ index 8bafc15..fd259c9 100644
  Libs: -L${libdir} -lwayland-egl
  Cflags: -I${includedir}
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0005-interface-remove-faulty-assert-to-make-weston-happy-.patch

@@ -1,7 +1,7 @@
-From ef3162e061a3231fbf836208f98c38c7c5581a9e Mon Sep 17 00:00:00 2001
+From bd940c32878d401f311215270579ff513c2f3999 Mon Sep 17 00:00:00 2001
 From: "Yann E. MORIN" <yann.morin.1998@free.fr>
 Date: Sat, 24 Jan 2015 22:07:19 +0100
-Subject: [PATCH 05/13] interface: remove faulty assert() to make weston happy
+Subject: [PATCH 05/18] interface: remove faulty assert() to make weston happy
  at runtime
 
 This was removed after a discussion on IRC with the weston guys
@@ -13,7 +13,7 @@ Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
  1 file changed, 1 deletion(-)
 
 diff --git a/interface/vmcs_host/vc_vchi_dispmanx.c b/interface/vmcs_host/vc_vchi_dispmanx.c
-index 45f4cff..5d0368c 100755
+index eab146e..29e0dee 100755
 --- a/interface/vmcs_host/vc_vchi_dispmanx.c
 +++ b/interface/vmcs_host/vc_vchi_dispmanx.c
 @@ -1306,7 +1306,6 @@ static void *dispmanx_notify_func( void *arg ) {
@@ -25,5 +25,5 @@ index 45f4cff..5d0368c 100755
              }
           } else {
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0006-zero-out-wl-buffers-in-egl_surface_free.patch

@@ -1,7 +1,7 @@
-From 846e9271cf6a264e7e1f4e33be64df990ff39a74 Mon Sep 17 00:00:00 2001
+From 466f28ce302f68ac39be750f4b55285791f43ab1 Mon Sep 17 00:00:00 2001
 From: Khem Raj <raj.khem@gmail.com>
 Date: Sat, 6 Feb 2016 11:10:47 -0800
-Subject: [PATCH 06/13] zero-out wl buffers in egl_surface_free
+Subject: [PATCH 06/18] zero-out wl buffers in egl_surface_free
 
 origins from buildroot
 
@@ -29,5 +29,5 @@ index 42350bf..1f923d9 100644
  #endif
     }
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0007-initialize-front-back-wayland-buffers.patch

@@ -1,7 +1,7 @@
-From 15510fdf1c753c967b509046616b1e1a11b5b772 Mon Sep 17 00:00:00 2001
+From b4a2967513f7d0f5f3caee8cf6cbc7a7a085ebac Mon Sep 17 00:00:00 2001
 From: Khem Raj <raj.khem@gmail.com>
 Date: Sat, 6 Feb 2016 11:11:41 -0800
-Subject: [PATCH 07/13] initialize front back wayland buffers
+Subject: [PATCH 07/18] initialize front back wayland buffers
 
 origins from metrological wayland support
 
@@ -30,5 +30,5 @@ index 1f923d9..9a9582c 100644
     }
  #endif
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0008-Remove-RPC_FLUSH.patch

@@ -1,7 +1,7 @@
-From 1df080ab9528b82321cf87d71927314294ef7121 Mon Sep 17 00:00:00 2001
+From 14c22987dfa9fec02794856cd15b2d64b4b81c32 Mon Sep 17 00:00:00 2001
 From: Khem Raj <raj.khem@gmail.com>
 Date: Sat, 6 Feb 2016 11:09:18 -0800
-Subject: [PATCH 08/13] Remove RPC_FLUSH
+Subject: [PATCH 08/18] Remove RPC_FLUSH
 
 Origins from buildroot
 
@@ -23,5 +23,5 @@ index f9b7287..b04ffef 100644
        }
  #endif
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0009-fix-cmake-dependency-race.patch

@@ -1,7 +1,7 @@
-From 11842307cc0e32bac6ef7622e7791ca7a0e9fa61 Mon Sep 17 00:00:00 2001
+From e510be221276d06e630ab93452ecb712d3921790 Mon Sep 17 00:00:00 2001
 From: Khem Raj <raj.khem@gmail.com>
 Date: Sat, 6 Feb 2016 13:12:47 -0800
-Subject: [PATCH 09/13] fix cmake dependency race
+Subject: [PATCH 09/18] fix cmake dependency race
 
 Fixes errors like
 
@@ -74,5 +74,5 @@ index f0bae30..8c44c58 100644
  	struct wl_resource *resource;
  	struct wl_dispmanx *dispmanx;
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0010-Fix-for-framerate-with-nested-composition.patch

@@ -1,7 +1,7 @@
-From 532dc7dc11877a9dae0f3d101c9bfdacc50840ca Mon Sep 17 00:00:00 2001
+From 8e6cde08077eadfe563dc17c19995ebc48e30b97 Mon Sep 17 00:00:00 2001
 From: Khem Raj <raj.khem@gmail.com>
 Date: Tue, 29 Mar 2016 20:38:30 -0700
-Subject: [PATCH 10/13] Fix for framerate with nested composition
+Subject: [PATCH 10/18] Fix for framerate with nested composition
 
 frame rate appears irregular and lower than expected when using nested composition.
 
@@ -56,5 +56,5 @@ index 03fe67b..13a110c 100644
  #ifdef ANDROID
                 CLIENT_UNLOCK();
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0011-build-shared-library-for-vchostif.patch

@@ -1,7 +1,7 @@
-From 37ff90075102407d3abb3899b8c6ef64f6230207 Mon Sep 17 00:00:00 2001
+From 9a97d60262999093d6ce8cb688279506c210d802 Mon Sep 17 00:00:00 2001
 From: Khem Raj <raj.khem@gmail.com>
 Date: Sat, 2 Apr 2016 10:37:24 -0700
-Subject: [PATCH 11/13] build shared library for vchostif
+Subject: [PATCH 11/18] build shared library for vchostif
 
 Fixes #149
 
@@ -24,5 +24,5 @@ index c415176..d0cca1a 100755
  #add_library(bufman            vc_vchi_bufman.c            )
  
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0012-implement-buffer-wrapping-interface-for-dispmanx.patch

@@ -1,14 +1,14 @@
-From ce130bff946c3b78fc4dbbf98d9b16b5152f2e85 Mon Sep 17 00:00:00 2001
+From fedd7668152049c15ed58c7058e5f4a9c1fac7cb Mon Sep 17 00:00:00 2001
 From: Khem Raj <raj.khem@gmail.com>
 Date: Sat, 2 Apr 2016 10:54:59 -0700
-Subject: [PATCH 12/13] implement buffer wrapping interface for dispmanx
+Subject: [PATCH 12/18] implement buffer wrapping interface for dispmanx
 
 Courtesy: Zan Dobersek
 
 Signed-off-by: Khem Raj <raj.khem@gmail.com>
 ---
- interface/khronos/ext/egl_wayland.c | 42 +++++++++++++++++++++++++++++++++++++
- interface/wayland/dispmanx.xml      | 10 +++++++++
+ interface/khronos/ext/egl_wayland.c | 42 +++++++++++++++++++++++++++++
+ interface/wayland/dispmanx.xml      | 10 +++++++
  2 files changed, 52 insertions(+)
 
 diff --git a/interface/khronos/ext/egl_wayland.c b/interface/khronos/ext/egl_wayland.c
@@ -88,5 +88,5 @@ index c18626d..11ed1ef 100644
  
  </protocol>
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0013-Implement-triple-buffering-for-wayland.patch

@@ -1,7 +1,7 @@
-From 14d915a63a4e69290966543ce12edd615bfa9a25 Mon Sep 17 00:00:00 2001
+From 65f8bca55aead676cd06fc3210aeffef1f2158c6 Mon Sep 17 00:00:00 2001
 From: Jeff Wannamaker <jeff_wannamaker@cable.comcast.com>
 Date: Thu, 19 Jan 2017 18:56:07 +0000
-Subject: [PATCH 13/13] Implement triple buffering for wayland
+Subject: [PATCH 13/18] Implement triple buffering for wayland
 
 Change from double to triple buffering for wayland.
 This enables higher frame rates without tearing artifacts
@@ -67,10 +67,11 @@ diff --git a/interface/khronos/egl/egl_client_surface.h b/interface/khronos/egl/
 index e328b77..58a3184 100644
 --- a/interface/khronos/egl/egl_client_surface.h
 +++ b/interface/khronos/egl/egl_client_surface.h
-@@ -313,6 +313,17 @@ typedef struct {
+@@ -312,6 +312,17 @@ typedef struct {
+    */
     struct wl_dispmanx_client_buffer *front_wl_buffer;
  
-    /*
++   /*
 +      middle_wl_buffer
 +
 +      Validity:
@@ -81,10 +82,9 @@ index e328b77..58a3184 100644
 +   */
 +   struct wl_dispmanx_client_buffer *middle_wl_buffer;
 +
-+   /*
+    /*
        back_wl_buffer
  
-       Validity:
 -- 
-2.12.0
+2.19.1
 

recipes-graphics/userland/files/0014-GLES2-gl2ext.h-Define-GL_R8_EXT-and-GL_RG8_EXT.patch

@@ -1,30 +1,35 @@
-From 55a66f56a14eb8c3ae8294860e49efc9c9598c46 Mon Sep 17 00:00:00 2001
+From dc1d07d835e1fe70c957a655d6fbb8cde65775af Mon Sep 17 00:00:00 2001
 From: Khem Raj <raj.khem@gmail.com>
 Date: Wed, 10 May 2017 06:39:34 +0000
-Subject: [PATCH] GLES2/gl2ext.h: Define GL_R8_EXT and GL_RG8_EXT
+Subject: [PATCH 14/18] GLES2/gl2ext.h: Define GL_R8_EXT and GL_RG8_EXT
 
 weston code uses these defines
 Upstream-Status: Pending
 
 Signed-off-by: Khem Raj <raj.khem@gmail.com>
 ---
- interface/khronos/include/GLES2/gl2ext.h | 3 +++
- 1 file changed, 3 insertions(+)
+ interface/khronos/include/GLES2/gl2ext.h | 8 ++++++++
+ 1 file changed, 8 insertions(+)
 
 diff --git a/interface/khronos/include/GLES2/gl2ext.h b/interface/khronos/include/GLES2/gl2ext.h
-index 4eacf7f..283e3e1 100644
+index 4eacf7f..b1acc9f 100644
 --- a/interface/khronos/include/GLES2/gl2ext.h
 +++ b/interface/khronos/include/GLES2/gl2ext.h
-@@ -327,6 +327,9 @@ typedef void* GLeglImageOES;
+@@ -327,6 +327,14 @@ typedef void* GLeglImageOES;
  #define GL_RGBX_BRCM                                            0x80EE
  #endif
  
++#ifndef GL_EXT_texture_rg
++#define GL_EXT_texture_rg 1
++#define GL_RED_EXT                                              0x1903
++#define GL_RG_EXT                                               0x8227
 +#define GL_R8_EXT                                               0x8229
 +#define GL_RG8_EXT                                              0x822B
++#endif /* GL_EXT_texture_rg */
 +
  /* GL_EXT_texture_type_2_10_10_10_REV */
  #ifndef GL_EXT_texture_type_2_10_10_10_REV
  #define GL_UNSIGNED_INT_2_10_10_10_REV_EXT                      0x8368
 -- 
-1.9.1
+2.19.1
 

recipes-graphics/userland/files/0015-EGL-glplatform.h-define-EGL_CAST.patch

@@ -0,0 +1,32 @@
+From b5fa294c0d8fcb6dd5bfbfb96a0885dd9f3ae609 Mon Sep 17 00:00:00 2001
+From: Andrea Galbusera <gizero@gmail.com>
+Date: Fri, 14 Jul 2017 09:52:54 +0200
+Subject: [PATCH 15/18] EGL/glplatform.h: define EGL_CAST
+
+C++ / C typecast macros for special EGL handle values: used by libepoxy code
+The definition comes from the updated version of this header in mesa.
+
+Upstream-Status: Pending
+---
+ interface/khronos/include/EGL/eglplatform.h | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/interface/khronos/include/EGL/eglplatform.h b/interface/khronos/include/EGL/eglplatform.h
+index 1f7c930..c39d425 100644
+--- a/interface/khronos/include/EGL/eglplatform.h
++++ b/interface/khronos/include/EGL/eglplatform.h
+@@ -202,4 +202,11 @@ EGLAPI void EGLAPIENTRY BEGL_GetDefaultDriverInterfaces(BEGL_DriverInterfaces *i
+ #include "interface/khronos/common/khrn_client_mangle.h"
+ #endif
+ 
++/* C++ / C typecast macros for special EGL handle values */
++#if defined(__cplusplus)
++#define EGL_CAST(type, value) (static_cast<type>(value))
++#else
++#define EGL_CAST(type, value) ((type) (value))
++#endif
++
+ #endif /* __eglplatform_h */
+-- 
+2.19.1
+

recipes-graphics/userland/files/0016-Allow-multiple-wayland-compositor-state-data-per-pro.patch

@@ -0,0 +1,145 @@
+From bff03f92c0d8bae113e0c7234c719f8385808b38 Mon Sep 17 00:00:00 2001
+From: Jeff Wannamaker <jeff_wannamaker@cable.comcast.com>
+Date: Sat, 27 Jan 2018 12:28:31 -0500
+Subject: [PATCH 16/18] Allow multiple wayland compositor state data per
+ process
+
+When eglBindWaylandDisplayWL is called store the wl_global
+created in a list associated with the wayland display.
+This allows multiple wayland compositor instances to be
+created and used per process. This scenario is common for
+applications integrating externl process UI elements
+via embedded composition e.g. westeros
+
+Signed-off-by: Jeff Wannamaker <jeff_wannamaker@cable.comcast.com>
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ interface/khronos/common/khrn_client.c |  2 +-
+ interface/khronos/common/khrn_client.h | 11 +++++-
+ interface/khronos/ext/egl_wayland.c    | 50 ++++++++++++++++++++++----
+ 3 files changed, 55 insertions(+), 8 deletions(-)
+
+diff --git a/interface/khronos/common/khrn_client.c b/interface/khronos/common/khrn_client.c
+index d7e798e..60bdb63 100644
+--- a/interface/khronos/common/khrn_client.c
++++ b/interface/khronos/common/khrn_client.c
+@@ -147,7 +147,7 @@ bool client_process_state_init(CLIENT_PROCESS_STATE_T *process)
+ {
+    if (!process->inited) {
+ #ifdef BUILD_WAYLAND
+-      process->wl_global = NULL;
++      process->wlStateMap = NULL;
+ #endif
+ 
+       if (!khrn_pointer_map_init(&process->contexts, 64))
+diff --git a/interface/khronos/common/khrn_client.h b/interface/khronos/common/khrn_client.h
+index 615f7b4..4fa86f7 100644
+--- a/interface/khronos/common/khrn_client.h
++++ b/interface/khronos/common/khrn_client.h
+@@ -170,6 +170,15 @@ static INLINE CLIENT_THREAD_STATE_T *CLIENT_GET_CHECK_THREAD_STATE(void)
+    return (CLIENT_THREAD_STATE_T *)platform_tls_get_check(client_tls);
+ }
+ 
++#ifdef BUILD_WAYLAND
++typedef struct WAYLAND_STATE
++{
++   struct WAYLAND_STATE *next;
++   struct wl_display *display;
++   struct wl_global *wl_global;
++} WAYLAND_STATE_T;
++#endif
++
+ /*
+    per-process state
+ 
+@@ -318,7 +327,7 @@ struct CLIENT_PROCESS_STATE {
+    struct wl_event_queue *wl_queue;
+ 
+    /* Compositor-side Wayland state */
+-   struct wl_global *wl_global;
++   WAYLAND_STATE_T *wlStateMap;
+ #endif
+ };
+ 
+diff --git a/interface/khronos/ext/egl_wayland.c b/interface/khronos/ext/egl_wayland.c
+index 9ef89cd..abd5ab3 100644
+--- a/interface/khronos/ext/egl_wayland.c
++++ b/interface/khronos/ext/egl_wayland.c
+@@ -208,17 +208,38 @@ eglBindWaylandDisplayWL(EGLDisplay dpy, struct wl_display *display)
+ {
+    CLIENT_THREAD_STATE_T *thread;
+    CLIENT_PROCESS_STATE_T *process;
++   WAYLAND_STATE_T *stateIter;
++   WAYLAND_STATE_T *stateNew;
++   struct wl_global *wl_global;
+ 
+    if (!CLIENT_LOCK_AND_GET_STATES(dpy, &thread, &process))
+       return EGL_FALSE;
+ 
+-   if (process->wl_global != NULL)
++   stateIter= process->wlStateMap;
++   while( stateIter )
++   {
++      if ( stateIter->display == display )
++         goto error;
++      stateIter= stateIter->next;
++   }
++
++   wl_global = wl_global_create(display, &wl_dispmanx_interface, 1,
++                                NULL, bind_dispmanx);
++   if (wl_global == NULL)
+       goto error;
+ 
+-   process->wl_global = wl_global_create(display, &wl_dispmanx_interface, 1,
+-                                         NULL, bind_dispmanx);
+-   if (process->wl_global == NULL)
++   stateNew= (WAYLAND_STATE_T*)calloc( 1, sizeof(WAYLAND_STATE_T));
++   if (stateNew == NULL )
++   {
++      wl_global_destroy(wl_global);
+       goto error;
++   }
++
++   stateNew->next= process->wlStateMap;
++   stateNew->display= display;
++   stateNew->wl_global= wl_global;
++   process->wlStateMap= stateNew;
++   CLIENT_UNLOCK();
+ 
+    return EGL_TRUE;
+ 
+@@ -232,12 +253,29 @@ eglUnbindWaylandDisplayWL(EGLDisplay dpy, struct wl_display *display)
+ {
+    CLIENT_THREAD_STATE_T *thread;
+    CLIENT_PROCESS_STATE_T *process;
++   WAYLAND_STATE_T *stateIter;
++   WAYLAND_STATE_T *statePrev;
+ 
+    if (!CLIENT_LOCK_AND_GET_STATES(dpy, &thread, &process))
+       return EGL_FALSE;
+ 
+-   wl_global_destroy(process->wl_global);
+-   process->wl_global = NULL;
++   statePrev= NULL;
++   stateIter= process->wlStateMap;
++   while( stateIter )
++   {
++      if ( stateIter->display == display )
++      {
++         wl_global_destroy(stateIter->wl_global);
++         if ( statePrev )
++            statePrev->next= stateIter->next;
++         else
++            process->wlStateMap= stateIter->next;
++         free( stateIter );
++         break;
++      }
++      statePrev= stateIter;
++      stateIter= stateIter->next;
++   }
+ 
+    CLIENT_UNLOCK();
+ 
+-- 
+2.19.1
+

recipes-graphics/userland/files/0017-khronos-backport-typedef-for-EGL_EXT_image_dma_buf_i.patch

@@ -0,0 +1,38 @@
+From 8efd81e96bdd3be68063a6fd32be4755225e93b2 Mon Sep 17 00:00:00 2001
+From: Hugo Hromic <hhromic@gmail.com>
+Date: Sun, 13 May 2018 10:49:04 +0100
+Subject: [PATCH 17/18] khronos: backport typedef for
+ EGL_EXT_image_dma_buf_import
+
+The `gstreamer1.0-plugins-base` package version `1.14` uses `EGL_EXT_image_dma_buf_import`, which
+expects the `EGLuint64KHR` typedef that is present in recent versions of Khronos.
+However, the older version included in userland does not provide it.
+
+This patch backports the missing typedef from recent Khronos into userland.
+See: <https://www.khronos.org/registry/EGL/api/EGL/eglext.h>
+
+Submitted to userland in <https://github.com/raspberrypi/userland/pull/467>
+
+Upstream-Status: Submitted
+---
+ interface/khronos/include/EGL/eglext.h | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/interface/khronos/include/EGL/eglext.h b/interface/khronos/include/EGL/eglext.h
+index d7e5ba7..dcc90ce 100755
+--- a/interface/khronos/include/EGL/eglext.h
++++ b/interface/khronos/include/EGL/eglext.h
+@@ -190,6 +190,10 @@ typedef EGLBoolean (EGLAPIENTRYP PFNEGLSIGNALSYNCKHRPROC) (EGLDisplay dpy, EGLSy
+ typedef EGLBoolean (EGLAPIENTRYP PFNEGLGETSYNCATTRIBKHRPROC) (EGLDisplay dpy, EGLSyncKHR sync, EGLint attribute, EGLint *value);
+ #endif
+ 
++#ifndef EGL_KHR_uint64_typedef
++#define EGL_KHR_uint64_typedef 1
++typedef khronos_uint64_t EGLuint64KHR;
++#endif /* EGL_KHR_uint64_typedef */
+ 
+ #ifndef EGL_WL_bind_wayland_display
+ #define EGL_WL_bind_wayland_display 1
+-- 
+2.19.1
+

recipes-graphics/userland/files/0018-Add-EGL_IMG_context_priority-related-defines.patch

@@ -0,0 +1,35 @@
+From 9cfea4761ba68776fd9bfac671b74c7174f99029 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sun, 15 Jul 2018 00:48:38 -0700
+Subject: [PATCH 18/18] Add EGL_IMG_context_priority related defines
+
+These defines are needed for compiling weston 4.x
+taken from Khronos headers
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ interface/khronos/include/EGL/eglext.h | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+diff --git a/interface/khronos/include/EGL/eglext.h b/interface/khronos/include/EGL/eglext.h
+index dcc90ce..6842bf9 100755
+--- a/interface/khronos/include/EGL/eglext.h
++++ b/interface/khronos/include/EGL/eglext.h
+@@ -93,6 +93,14 @@ typedef EGLImageKHR (EGLAPIENTRYP PFNEGLCREATEIMAGEKHRPROC) (EGLDisplay dpy, EGL
+ typedef EGLBoolean (EGLAPIENTRYP PFNEGLDESTROYIMAGEKHRPROC) (EGLDisplay dpy, EGLImageKHR image);
+ #endif
+ 
++#ifndef EGL_IMG_context_priority
++#define EGL_IMG_context_priority 1
++#define EGL_CONTEXT_PRIORITY_LEVEL_IMG		0x3102
++#define EGL_CONTEXT_PRIORITY_HIGH_IMG		0x3101
++#define EGL_CONTEXT_PRIORITY_MEDIUM_IMG		0x3102
++#define EGL_CONTEXT_PRIORITY_LOW_IMG		0x3103
++#endif /* EGL_IMG_context_priority */
++
+ #ifndef EGL_KHR_vg_parent_image
+ #define EGL_KHR_vg_parent_image 1
+ #define EGL_VG_PARENT_IMAGE_KHR			0x30BA	/* eglCreateImageKHR target */
+-- 
+2.19.1
+

recipes-graphics/userland/userland_git.bb

@@ -5,18 +5,18 @@ vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG."
 LICENSE = "BSD-3-Clause"
 LIC_FILES_CHKSUM = "file://LICENCE;md5=0448d6488ef8cc380632b1569ee6d196"
 
-PR = "r5"
+PROVIDES += "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "", "virtual/libgles2 virtual/egl", d)}"
 
-PROVIDES = "virtual/libgles2 \
-            virtual/egl"
-
-RPROVIDES_${PN} += "libgles2 egl"
-
-COMPATIBLE_MACHINE = "raspberrypi"
+RPROVIDES_${PN} += "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "", "libgles2 egl libegl libegl1 libglesv2-2", d)}"
+COMPATIBLE_MACHINE = "^rpi$"
 
 SRCBRANCH = "master"
 SRCFORK = "raspberrypi"
-SRCREV = "50d3cb5f4ee95a9513bb9f94d661947e9e6ac085"
+SRCREV = "d574b51a60a075baefe863670466ee24e6c4256e"
+
+# Use the date of the above commit as the package version. Update this when
+# SRCREV is changed.
+PV = "20181120"
 
 SRC_URI = "\
     git://github.com/${SRCFORK}/userland.git;protocol=git;branch=${SRCBRANCH} \
@@ -34,6 +34,10 @@ SRC_URI = "\
     file://0012-implement-buffer-wrapping-interface-for-dispmanx.patch \
     file://0013-Implement-triple-buffering-for-wayland.patch \
     file://0014-GLES2-gl2ext.h-Define-GL_R8_EXT-and-GL_RG8_EXT.patch \
+    file://0015-EGL-glplatform.h-define-EGL_CAST.patch \
+    file://0016-Allow-multiple-wayland-compositor-state-data-per-pro.patch \
+    file://0017-khronos-backport-typedef-for-EGL_EXT_image_dma_buf_i.patch \
+    file://0018-Add-EGL_IMG_context_priority-related-defines.patch \
 "
 S = "${WORKDIR}/git"
 
@@ -60,6 +64,14 @@ do_install_append () {
 		sed -i 's/include "vcos_futex_mutex.h"/include "pthreads\/vcos_futex_mutex.h"/g' ${f}
 		sed -i 's/include "vcos_platform_types.h"/include "pthreads\/vcos_platform_types.h"/g' ${f}
 	done
+	if [ "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}" = "1" ]; then
+		rm -rf ${D}${libdir}/libEGL*
+		rm -rf ${D}${libdir}/libGLES*
+		rm -rf ${D}${libdir}/libwayland-*
+		rm -rf ${D}${libdir}/pkgconfig/egl.pc ${D}${libdir}/pkgconfig/glesv2.pc \
+			${D}${libdir}/pkgconfig/wayland-egl.pc
+		rm -rf ${D}${includedir}/EGL ${D}${includedir}/GLES* ${D}${includedir}/KHR
+	fi
 }
 
 # Shared libs from userland package  build aren't versioned, so we need
@@ -79,3 +91,4 @@ FILES_${PN}-dbg += "${libdir}/plugins/.debug"
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
 RDEPENDS_${PN} += "bash"
+RDEPENDS_${PN} += "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "libegl-mesa", "", d)}"

recipes-graphics/vc-graphics/vc-graphics.inc

@@ -4,7 +4,9 @@ LICENSE = "Proprietary"
 LIC_FILES_CHKSUM = "file://LICENCE;md5=86e53f5f5909ee66900418028de11780"
 
 PROVIDES = "virtual/libgles2 virtual/egl"
-COMPATIBLE_MACHINE = "raspberrypi"
+COMPATIBLE_MACHINE = "^rpi$"
+
+INHIBIT_DEFAULT_DEPS = "1"
 
 include recipes-bsp/common/firmware.inc
 

recipes-graphics/wayland/wayland_%.bbappend

@@ -0,0 +1,7 @@
+# until fully tested, prefer `libwayland-egl` provided by `userland` instead of `wayland` when not using vc4graphics
+do_install_append_rpi () {
+    if [ "${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}" = "0" ]; then
+        rm -f ${D}${libdir}/libwayland-egl*
+        rm -f ${D}${libdir}/pkgconfig/wayland-egl.pc
+    fi
+}

recipes-graphics/wayland/weston_%.bbappend

@@ -1,12 +1,10 @@
-EXTRA_OECONF_append_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', ' --enable-rpi-compositor WESTON_NATIVE_BACKEND=rpi-backend.so', d)}"
-
 PACKAGECONFIG_remove_rpi = "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', 'fbdev', '', d)}"
 
-EXTRA_OECONF += "--disable-xwayland-test \
+EXTRA_OECONF_append_rpi = " \
+    --disable-xwayland-test \
     --disable-simple-egl-clients \
+    ${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', ' \
+        --disable-resize-optimization \
+        --disable-setuid-install \
+    ', d)} \
 "
-
-EXTRA_OECONF += "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', '--enable-rpi-compositor', d)}"
-EXTRA_OECONF += "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', '--disable-resize-optimization', d)}"
-EXTRA_OECONF += "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', '--disable-setuid-install', d)}"
-EXTRA_OECONF += "${@bb.utils.contains('MACHINE_FEATURES', 'vc4graphics', '', 'WESTON_NATIVE_BACKEND=rpi-backend.so', d)}"

recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend

@@ -4,7 +4,6 @@ SRC_URI_append_rpi = " \
     file://xorg.conf.d/98-pitft.conf \
     file://xorg.conf.d/99-calibration.conf \
 "
-
 do_install_append_rpi () {
     PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
     if [ "${PITFT}" = "1" ]; then

recipes-kernel/bluez-firmware-rpidistro/bluez-firmware-rpidistro_git.bb

@@ -0,0 +1,84 @@
+SUMMARY = "Linux kernel Bluetooth firmware files from Raspbian distribution"
+DESCRIPTION = "Updated Bluetooth firmware files for RaspberryPi hardware. \
+RPi-Distro obtains these directly from Cypress; they are not submitted \
+to linux-firmware for general use."
+HOMEPAGE = "https://github.com/RPi-Distro/bluez-firmware"
+SECTION = "kernel"
+
+# Upstream has provided[^1] licensing information in the Debian
+# copyright file.  The wording of the Cypress license subsequently
+# changed in linux-firmware.
+#
+# Rather than make assumptions about what's supposed to be what, we'll
+# use the license implied by the source of these files, named to avoid
+# conflicts with linux-firmware.
+#
+# [^1]: https://github.com/RPi-Distro/bluez-firmware/issues/1
+LICENSE = "Firmware-cypress-rpidistro"
+LIC_FILES_CHKSUM = "\
+    file://LICENCE.cypress-rpidistro;md5=852f9d10cbedba1f6c439729bd0617b4 \
+"
+
+# These are not common licenses, set NO_GENERIC_LICENSE for them
+# so that the license files will be copied from fetched source
+NO_GENERIC_LICENSE[Firmware-cypress-rpidistro] = "LICENCE.cypress-rpidistro"
+
+SRC_URI = "git://github.com/RPi-Distro/bluez-firmware"
+SRCREV = "96eefffcccc725425fd83be5e0704a5c32b79e54"
+PV = "0.0+git${SRCPV}"
+
+S = "${WORKDIR}/git"
+
+inherit allarch
+
+CLEANBROKEN = "1"
+
+do_extract_lic() {
+    # Extract the license from the Debian copyright file
+    sed -e '1,23d' ${S}/debian/copyright > ${S}/LICENCE.cypress-rpidistro
+}
+# Must be before both do_install and do_populate_lic.  Putting it before
+# their common ancestor works; other approaches do not.
+addtask extract_lic after do_unpack before do_patch
+
+do_compile() {
+    :
+}
+
+do_install() {
+    install -d ${D}${nonarch_base_libdir}/firmware/brcm
+
+    cp LICENCE.cypress-rpidistro ${D}${nonarch_base_libdir}/firmware
+    install -m 0644 broadcom/BCM434*.hcd ${D}${nonarch_base_libdir}/firmware/brcm/
+}
+
+PACKAGES = "\
+    ${PN}-cypress-license \
+    ${PN}-bcm43430a1-hcd \
+    ${PN}-bcm4345c0-hcd \
+"
+
+LICENSE_${PN}-bcm43430a1-hcd = "Firmware-cypress-rpidistro"
+LICENSE_${PN}-bcm4345c0-hcd = "Firmware-cypress-rpidistro"
+LICENSE_${PN}-cypress-license = "Firmware-cypress-rpidistro"
+
+FILES_${PN}-cypress-license = "\
+    ${nonarch_base_libdir}/firmware/LICENCE.cypress-rpidistro \
+"
+FILES_${PN}-bcm43430a1-hcd = "\
+    ${nonarch_base_libdir}/firmware/brcm/BCM43430A1.hcd \
+"
+FILES_${PN}-bcm4345c0-hcd = "\
+    ${nonarch_base_libdir}/firmware/brcm/BCM4345C0.hcd \
+"
+
+RDEPENDS_${PN}-bcm43430a1-hcd += "${PN}-cypress-license"
+RDEPENDS_${PN}-bcm4345c0-hcd += "${PN}-cypress-license"
+RCONFLICTS_${PN}-bcm43430a1-hcd = "linux-firmware-bcm43430a1-hcd"
+RREPLACES_${PN}-bcm43430a1-hcd = "linux-firmware-bcm43430a1-hcd"
+RCONFLICTS_${PN}-bcm43435c0-hcd = "linux-firmware-bcm4345c0-hcd"
+RREPLACES_${PN}-bcm43435c0-hcd = "linux-firmware-bcm4345c0-hcd"
+
+# Firmware files are generally not run on the CPU, so they can be
+# allarch despite being architecture specific
+INSANE_SKIP = "arch"

recipes-kernel/linux-firmware-rpidistro/linux-firmware-rpidistro_git.bb

@@ -0,0 +1,96 @@
+SUMMARY = "Linux kernel firmware files from Raspbian distribution"
+DESCRIPTION = "Updated firmware files for RaspberryPi hardware. \
+RPi-Distro obtains these directly from Cypress; they are not submitted \
+to linux-firmware for general use."
+HOMEPAGE = "https://github.com/RPi-Distro/firmware-nonfree"
+SECTION = "kernel"
+
+# In maintained upstream linux-firmware:
+# * brcmfmac43430-sdio falls under LICENCE.cypress
+# * brcmfmac43455-sdio falls under LICENCE.broadcom_bcm43xx
+#
+# It is likely[^1] that both of these should be under LICENCE.cypress.
+# Further, at this time the text of LICENCE.broadcom_bcm43xx is the same
+# in linux-firmware and RPi-Distro/firmware-nonfree, but this may
+# change.
+#
+# Rather than make assumptions about what's supposed to be what, we'll
+# use the license implied by the source of these files, named to avoid
+# conflicts with linux-firmware.
+#
+# [^1]: https://github.com/RPi-Distro/bluez-firmware/issues/1
+LICENSE = "\
+    Firmware-broadcom_bcm43xx-rpidistro \
+    & WHENCE \
+"
+LIC_FILES_CHKSUM = "\
+    file://LICENCE.broadcom_bcm43xx;md5=3160c14df7228891b868060e1951dfbc \
+    file://WHENCE;md5=a9c2c217f513c20e1d16b384b3e2c12d \
+"
+
+# These are not common licenses, set NO_GENERIC_LICENSE for them
+# so that the license files will be copied from fetched source
+NO_GENERIC_LICENSE[Firmware-broadcom_bcm43xx-rpidistro] = "LICENCE.broadcom_bcm43xx"
+NO_GENERIC_LICENSE[WHENCE] = "WHENCE"
+
+SRC_URI = "git://github.com/RPi-Distro/firmware-nonfree"
+SRCREV = "b518de45ced519e8f7a499f4778100173402ae43"
+PV = "0.0+git${SRCPV}"
+
+S = "${WORKDIR}/git"
+
+inherit allarch
+
+CLEANBROKEN = "1"
+
+do_compile() {
+    :
+}
+
+do_install() {
+    install -d ${D}${nonarch_base_libdir}/firmware/brcm
+
+    cp ./LICENCE.broadcom_bcm43xx ${D}${nonarch_base_libdir}/firmware/LICENCE.broadcom_bcm43xx-rpidistro
+
+    # Replace outdated linux-firmware files with updated ones from
+    # raspbian firmware-nonfree. Raspbian adds blobs and nvram
+    # definitions that are also necessary so copy those too.
+    for fw in brcmfmac43430-sdio brcmfmac43455-sdio ; do
+        install -m 0644 brcm/${fw}.* ${D}${nonarch_base_libdir}/firmware/brcm/
+    done
+}
+
+PACKAGES = "\
+    ${PN}-broadcom-license \
+    ${PN}-bcm43430 \
+    ${PN}-bcm43455 \
+"
+
+LICENSE_${PN}-bcm43430 = "Firmware-broadcom_bcm43xx-rpidistro"
+LICENSE_${PN}-bcm43455 = "Firmware-broadcom_bcm43xx-rpidistro"
+LICENSE_${PN}-broadcom-license = "Firmware-broadcom_bcm43xx-rpidistro"
+FILES_${PN}-broadcom-license = "${nonarch_base_libdir}/firmware/LICENCE.broadcom_bcm43xx-rpidistro"
+FILES_${PN}-bcm43430 = "${nonarch_base_libdir}/firmware/brcm/brcmfmac43430*"
+FILES_${PN}-bcm43455 = "${nonarch_base_libdir}/firmware/brcm/brcmfmac43455*"
+RDEPENDS_${PN}-bcm43430 += "${PN}-broadcom-license"
+RDEPENDS_${PN}-bcm43455 += "${PN}-broadcom-license"
+RCONFLICTS_${PN}-bcm43430 = "\
+    linux-firmware-bcm43430 \
+    linux-firmware-raspbian-bcm43430 \
+"
+RREPLACES_${PN}-bcm43430 = "\
+    linux-firmware-bcm43430 \
+    linux-firmware-raspbian-bcm43430 \
+"
+RCONFLICTS_${PN}-bcm43455 = "\
+    linux-firmware-bcm43455 \
+    linux-firmware-raspbian-bcm43455 \
+"
+RREPLACES_${PN}-bcm43455 = "\
+    linux-firmware-bcm43455 \
+    linux-firmware-raspbian-bcm43455 \
+"
+
+# Firmware files are generally not run on the CPU, so they can be
+# allarch despite being architecture specific
+INSANE_SKIP = "arch"

recipes-kernel/linux-firmware/files/brcmfmac43430-sdio.txt

@@ -1,66 +0,0 @@
-# NVRAM file for BCM943430WLPTH
-# 2.4 GHz, 20 MHz BW mode
-
-# The following parameter values are just placeholders, need to be updated.
-manfid=0x2d0
-prodid=0x0727
-vendid=0x14e4
-devid=0x43e2
-boardtype=0x0727
-boardrev=0x1101
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-sromrev=11
-boardflags=0x00404201
-boardflags3=0x08000000
-xtalfreq=37400
-nocrc=1
-ag0=255
-aa2g=1
-ccode=ALL
-
-pa0itssit=0x20
-extpagain2g=0
-#PA parameters for 2.4GHz, measured at CHIP OUTPUT
-pa2ga0=-168,7161,-820
-AvVmid_c0=0x0,0xc8
-cckpwroffset0=5
-
-# PPR params
-maxp2ga0=84
-txpwrbckof=6
-cckbw202gpo=0
-legofdmbw202gpo=0x66111111
-mcsbw202gpo=0x77711111
-propbw202gpo=0xdd
-
-# OFDM IIR :
-ofdmdigfilttype=18
-ofdmdigfilttypebe=18
-# PAPD mode:
-papdmode=1
-papdvalidtest=1
-pacalidx2g=42
-papdepsoffset=-22
-papdendidx=58
-
-# LTECX flags
-ltecxmux=0
-ltecxpadnum=0x0102
-ltecxfnsel=0x44
-ltecxgcigpio=0x01
-
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-
-deadman_to=0xffffffff
-# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
-muxenab=0x1
-# CLDO PWM voltage settings - 0x4 - 1.1 volt
-#cldo_pwm=0x4
-
-#VCO freq 326.4MHz
-spurconfig=0x3 
-
-edonthd20l=-75
-edoffthd20ul=-80

recipes-kernel/linux-firmware/linux-firmware_%.bbappend

@@ -1,12 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
-
-SRC_URI += "file://brcmfmac43430-sdio.txt"
-
-do_install_append() {
-	install -D -m 0644 ${WORKDIR}/brcmfmac43430-sdio.txt ${D}/lib/firmware/brcm/brcmfmac43430-sdio.txt
-}
-
-FILES_${PN}-bcm43430 += " \
-  /lib/firmware/brcm/brcmfmac43430-sdio.txt \
-"
-

recipes-kernel/linux/files/0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch

@@ -0,0 +1,62 @@
+From e6ebc8e654bba53f28af5229a1069fc74fa58b7b Mon Sep 17 00:00:00 2001
+From: Jason Wessel <jason.wessel@windriver.com>
+Date: Thu, 25 Sep 2014 11:26:49 -0700
+Subject: [PATCH] menuconfig,check-lxdiaglog.sh: Allow specification of ncurses
+ location
+
+In some cross build environments such as the Yocto Project build
+environment it provides an ncurses library that is compiled
+differently than the host's version.  This causes display corruption
+problems when the host's curses includes are used instead of the
+includes from the provided compiler are overridden.  There is a second
+case where there is no curses libraries at all on the host system and
+menuconfig will just fail entirely.
+
+The solution is simply to allow an override variable in
+check-lxdialog.sh for environments such as the Yocto Project.  Adding
+a CROSS_CURSES_LIB and CROSS_CURSES_INC solves the issue and allowing
+compiling and linking against the right headers and libraries.
+
+Upstream-Status: submitted [https://lkml.org/lkml/2013/3/3/103]
+
+Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
+cc: Michal Marek <mmarek@suse.cz>
+cc: linux-kbuild@vger.kernel.org
+Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
+Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
+---
+ scripts/kconfig/lxdialog/check-lxdialog.sh | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+ mode change 100755 => 100644 scripts/kconfig/lxdialog/check-lxdialog.sh
+
+diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh
+old mode 100755
+new mode 100644
+index 5075ebf2d3b9..ba9242101190
+--- a/scripts/kconfig/lxdialog/check-lxdialog.sh
++++ b/scripts/kconfig/lxdialog/check-lxdialog.sh
+@@ -4,6 +4,10 @@
+ # What library to link
+ ldflags()
+ {
++	if [ "$CROSS_CURSES_LIB" != "" ]; then
++		echo "$CROSS_CURSES_LIB"
++		exit
++	fi
+ 	pkg-config --libs ncursesw 2>/dev/null && exit
+ 	pkg-config --libs ncurses 2>/dev/null && exit
+ 	for ext in so a dll.a dylib ; do
+@@ -21,6 +25,10 @@ ldflags()
+ # Where is ncurses.h?
+ ccflags()
+ {
++	if [ x"$CROSS_CURSES_INC" != x ]; then
++		echo "$CROSS_CURSES_INC"
++		exit
++	fi
+ 	if pkg-config --cflags ncursesw 2>/dev/null; then
+ 		echo '-DCURSES_LOC="<ncurses.h>" -DNCURSES_WIDECHAR=1'
+ 	elif pkg-config --cflags ncurses 2>/dev/null; then
+-- 
+2.14.3
+

recipes-kernel/linux/files/rpi-kernel-misc.cfg

@@ -0,0 +1 @@
+CONFIG_SENSORS_RPI_POE_FAN=m

recipes-kernel/linux/linux-raspberrypi-dev.bb

@@ -7,20 +7,16 @@ python __anonymous() {
 
 FILESEXTRAPATHS_prepend := "${THISDIR}/linux-raspberrypi:"
 
-LINUX_VERSION ?= "4.11"
-LINUX_RPI_DEV_BRANCH ?= "rpi-4.11.y"
+LINUX_VERSION ?= "4.16"
+LINUX_RPI_DEV_BRANCH ?= "rpi-4.16.y"
 
 SRCREV = "${AUTOREV}"
-SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=${LINUX_RPI_DEV_BRANCH} \
-           file://0001-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch \
-"
+SRC_URI = " \
+    git://github.com/raspberrypi/linux.git;protocol=git;branch=${LINUX_RPI_DEV_BRANCH} \
+    file://0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch \
+    "
 require linux-raspberrypi.inc
 
-# A LOADADDR is needed when building a uImage format kernel. This value is not
-# set by default in rpi-4.8.y and later branches so we need to provide it
-# manually. This value unused if KERNEL_IMAGETYPE is not uImage.
-KERNEL_EXTRA_ARGS += "LOADADDR=0x00008000"
-
 # Disable version check so that we don't have to edit this recipe every time
 # upstream bumps the version
 KERNEL_VERSION_SANITY_SKIP = "1"

recipes-kernel/linux/linux-raspberrypi-dev/0001-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch

@@ -1,29 +0,0 @@
-From 922ce1fd0eb810b713f6ffa9a7ab97c11b6e38cf Mon Sep 17 00:00:00 2001
-From: Khem Raj <raj.khem@gmail.com>
-Date: Fri, 10 Feb 2017 17:57:08 -0800
-Subject: [PATCH] build/arm64: Add rules for .dtbo files for dts overlays
-
-We now create overlays as .dtbo files.
-
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
----
- arch/arm64/Makefile | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
-index 3635b8662724..822fefeb1cd0 100644
---- a/arch/arm64/Makefile
-+++ b/arch/arm64/Makefile
-@@ -113,6 +113,9 @@ zinstall install:
- %.dtb: scripts
- 	$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
- 
-+%.dtbo: | scripts
-+	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
-+
- PHONY += dtbs dtbs_install
- 
- dtbs: prepare scripts
--- 
-2.11.1
-

recipes-kernel/linux/linux-raspberrypi-rt_4.14.bb

@@ -0,0 +1,9 @@
+LINUX_VERSION ?= "4.14.81"
+
+SRCREV = "acf578d07d57480674d5361df9171fe9528765cb"
+SRC_URI = " \
+    git://github.com/raspberrypi/linux.git;branch=rpi-4.14.y-rt \
+    file://0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch \
+    "
+
+require linux-raspberrypi.inc

recipes-kernel/linux/linux-raspberrypi.inc

@@ -1,49 +1,128 @@
-require linux-rpi.inc
-inherit linux-raspberrypi-base
-
 DESCRIPTION = "Linux Kernel for Raspberry Pi"
 SECTION = "kernel"
 LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
 
-SRC_URI += " \
-        file://defconfig \
-        "
-
-COMPATIBLE_MACHINE = "raspberrypi"
+COMPATIBLE_MACHINE = "^rpi$"
 
 PE = "1"
 PV = "${LINUX_VERSION}+git${SRCPV}"
 
-# NOTE: For now we pull in the default config from the RPi kernel GIT tree.
-KERNEL_DEFCONFIG_raspberrypi ?= "bcmrpi_defconfig"
-KERNEL_DEFCONFIG_raspberrypi2 ?= "bcm2709_defconfig"
-KERNEL_DEFCONFIG_raspberrypi3-64 ?= "bcmrpi3_defconfig"
+inherit kernel siteinfo
+require recipes-kernel/linux/linux-yocto.inc
+
+SRC_URI += "file://rpi-kernel-misc.cfg"
+
+KCONFIG_MODE = "--alldefconfig"
+KBUILD_DEFCONFIG_raspberrypi0-wifi ?= "bcmrpi_defconfig"
+KBUILD_DEFCONFIG_raspberrypi ?= "bcmrpi_defconfig"
+KBUILD_DEFCONFIG_raspberrypi2 ?= "bcm2709_defconfig"
+KBUILD_DEFCONFIG_raspberrypi3 ?= "bcm2709_defconfig"
+KBUILD_DEFCONFIG_raspberrypi3-64 ?= "bcmrpi3_defconfig"
 
 # CMDLINE for raspberrypi
-CMDLINE ?= "dwc_otg.lpm_enable=0 console=serial0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
+SERIAL = "${@oe.utils.conditional("ENABLE_UART", "1", "console=serial0,115200", "", d)}"
+CMDLINE ?= "dwc_otg.lpm_enable=0 ${SERIAL} root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
 
 # Add the kernel debugger over console kernel command line option if enabled
-CMDLINE_append = ' ${@base_conditional("ENABLE_KGDB", "1", "kgdboc=serial0,115200", "", d)}'
+CMDLINE_append = ' ${@oe.utils.conditional("ENABLE_KGDB", "1", "kgdboc=serial0,115200", "", d)}'
 
-UDEV_GE_141 ?= "1"
+# Disable rpi logo on boot
+CMDLINE_append += ' ${@oe.utils.conditional("DISABLE_RPI_BOOT_LOGO", "1", "logo.nologo", "", d)}'
+
+# You can define CMDLINE_DEBUG as "debug" in your local.conf or distro.conf
+# to enable kernel debugging.
+CMDLINE_DEBUG ?= ""
+CMDLINE_append = " ${CMDLINE_DEBUG}"
 
 KERNEL_MODULE_AUTOLOAD += "${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "stmpe-ts", "", d)}"
 
-# Set programmatically some variables during recipe parsing
-# See http://www.yoctoproject.org/docs/current/bitbake-user-manual/bitbake-user-manual.html#anonymous-python-functions
-python __anonymous () {
-    kerneltype = d.getVar('KERNEL_IMAGETYPE')
-    kerneldt = get_dts(d, d.getVar('LINUX_VERSION'))
-    d.setVar("KERNEL_DEVICETREE", kerneldt)
+# A LOADADDR is needed when building a uImage format kernel. This value is not
+# set by default in rpi-4.8.y and later branches so we need to provide it
+# manually. This value unused if KERNEL_IMAGETYPE is not uImage.
+KERNEL_EXTRA_ARGS += "LOADADDR=0x00008000"
+
+# Set a variable in .configure
+# $1 - Configure variable to be set
+# $2 - value [n/y/value]
+kernel_configure_variable() {
+    # Remove the config
+    CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;"
+    if test "$2" = "n"
+    then
+        echo "# CONFIG_$1 is not set" >> ${B}/.config
+    else
+        echo "CONFIG_$1=$2" >> ${B}/.config
+    fi
 }
 
-do_kernel_configme_prepend() {
-    install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available."
+config_setup() {
+    # From kernel.bbclass. Unfortunately, this is needed to support builds that
+    # use devtool. The reason is as follows:
+    #
+    # - In devtool builds, externalsrc.bbclass gets inherited and sets a list of
+    # SRCTREECOVEREDTASKS, which don't get run because they affect the source
+    # tree and, when using devtool, we want the developer's changes to be the
+    # single source of truth. kernel-yocto.bbclass adds do_kernel_configme to
+    # SRCTREECOVEREDTASKS, so it doesn't run in a devtool build., In a normal
+    # non-devtool build, do_kernel_configme creates ${B}.config.
+    #
+    # - Normally (e.g. in linux-yocto), it would be OK that do_kernel_configme
+    # doesn't run, because the first few lines of do_configure in kernel.bbclass
+    # populate ${B}.config from either ${S}.config (if it exists) for custom
+    # developer changes, or otherwise from ${WORDIR}/defconfig.
+    #
+    # - In linux-raspberrypi, we add do_configure_prepend, which tweaks
+    # ${B}.config. Since this runs *before* the kernel.bbclass do_configure,
+    # ${B}.config doesn't yet exist and we hit an error. Thus we need to move
+    # the logic from do_configure up to before our do_configure_prepend. Because
+    # we are copying only a portion of do_configure and not the whole thing,
+    # there is no clean way to do it using OE functionality, so we just
+    # copy-and-paste.
+    if [ "${S}" != "${B}" ] && [ -f "${S}/.config" ] && [ ! -f "${B}/.config" ]; then
+        mv "${S}/.config" "${B}/.config"
+    fi
+
+    # Copy defconfig to .config if .config does not exist. This allows
+    # recipes to manage the .config themselves in do_configure_prepend().
+    if [ -f "${WORKDIR}/defconfig" ] && [ ! -f "${B}/.config" ]; then
+        cp "${WORKDIR}/defconfig" "${B}/.config"
+    fi
 }
 
-do_install_prepend() {
-    install -d ${D}/lib/firmware
+do_configure_prepend() {
+    config_setup
+
+    mv -f ${B}/.config ${B}/.config.patched
+    CONF_SED_SCRIPT=""
+
+    # Localversion
+    kernel_configure_variable LOCALVERSION "\"\""
+
+    if [ "${INITRAMFS_IMAGE_BUNDLE}" = "1" ]; then
+        kernel_configure_variable OVERLAY_FS y
+        kernel_configure_variable SQUASHFS y
+        kernel_configure_variable UBIFS_FS y
+    fi
+
+    # Activate the configuration options for VC4
+    VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
+    if [ "${VC4GRAPHICS}" = "1" ]; then
+        kernel_configure_variable I2C_BCM2835 y
+        kernel_configure_variable DRM y
+        kernel_configure_variable DRM_FBDEV_EMULATION y
+        kernel_configure_variable DRM_VC4 y
+    fi
+
+    # Keep this the last line
+    # Remove all modified configs and add the rest to .config
+    sed -e "${CONF_SED_SCRIPT}" < '${B}/.config.patched' >> '${B}/.config'
+    rm -f ${B}/.config.patched
+}
+
+do_compile_append_raspberrypi3-64() {
+    cc_extra=$(get_cc_option)
+    oe_runmake dtbs CC="${KERNEL_CC} $cc_extra " LD="${KERNEL_LD}" ${KERNEL_EXTRA_ARGS}
 }
 
 do_deploy_append() {

recipes-kernel/linux/linux-raspberrypi/defconfig

@@ -1 +0,0 @@
-# Dummy file to get through do_kernel_configme.

recipes-kernel/linux/linux-raspberrypi_4.14.bb

@@ -0,0 +1,9 @@
+LINUX_VERSION ?= "4.14.112"
+
+SRCREV = "6b5c4a2508403839af29ef44059d04acbe0ee204"
+SRC_URI = " \
+    git://github.com/raspberrypi/linux.git;branch=rpi-4.14.y \
+    file://0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch \
+    "
+
+require linux-raspberrypi.inc

recipes-kernel/linux/linux-raspberrypi_4.9.bb

@@ -1,13 +1,11 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
 
-LINUX_VERSION ?= "4.9.27"
+LINUX_VERSION ?= "4.9.80"
 
-SRCREV = "9a5f215eda12bad29b35040dff00d0346fe517e2"
-SRC_URI = "git://github.com/raspberrypi/linux.git;branch=rpi-4.9.y"
+SRCREV = "7f9c648dad6473469b4133898fa6bb8d818ecff9"
+SRC_URI = " \
+    git://github.com/raspberrypi/linux.git;branch=rpi-4.9.y \
+    file://0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch \
+    "
 
 require linux-raspberrypi.inc
-
-# A LOADADDR is needed when building a uImage format kernel. This value is not
-# set by default in rpi-4.8.y and later branches so we need to provide it
-# manually. This value unused if KERNEL_IMAGETYPE is not uImage.
-KERNEL_EXTRA_ARGS += "LOADADDR=0x00008000"

recipes-kernel/linux/linux-rpi.inc

@@ -1,148 +0,0 @@
-DESCRIPTION = "Linux Kernel"
-SECTION = "kernel"
-LICENSE = "GPLv2"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
-
-inherit kernel siteinfo
-require recipes-kernel/linux/linux-yocto.inc
-
-# Enable OABI compat for people stuck with obsolete userspace
-ARM_KEEP_OABI ?= "1"
-
-# Quirk for udev greater or equal 141
-UDEV_GE_141 ?= "1"
-
-# You can define CMDLINE_DEBUG as "debug" in your local.conf or distro.conf
-# to enable kernel debugging.
-CMDLINE_DEBUG ?= ""
-CMDLINE_append = " ${CMDLINE_DEBUG}"
-
-KERNEL_INITRAMFS ?= '${@base_conditional("INITRAMFS_IMAGE_BUNDLE", "1", "1", "", d)}'
-
-# Set a variable in .configure
-# $1 - Configure variable to be set
-# $2 - value [n/y/value]
-kernel_configure_variable() {
-    # Remove the config
-    CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;"
-    if test "$2" = "n"
-    then
-        echo "# CONFIG_$1 is not set" >> ${B}/.config
-    else
-        echo "CONFIG_$1=$2" >> ${B}/.config
-    fi
-}
-
-do_configure_prepend() {
-    # Clean .config
-    echo "" > ${B}/.config
-    CONF_SED_SCRIPT=""
-
-    # oabi / eabi support
-    kernel_configure_variable AEABI y
-    if [ "${ARM_KEEP_OABI}" = "1" ] ; then
-        kernel_configure_variable OABI_COMPAT y
-    else
-        kernel_configure_variable OABI_COMPAT n
-    fi
-
-    # Set cmdline
-    kernel_configure_variable CMDLINE "\"${CMDLINE}\""
-
-    # Localversion
-    kernel_configure_variable LOCALVERSION "\"\""
-    kernel_configure_variable LOCALVERSION_AUTO n
-
-    # Udev quirks
-    # Newer versions of udev mandate that sysfs doesn't have deprecated entries
-    if [ "${UDEV_GE_141}" = "1" ] ; then
-        kernel_configure_variable SYSFS_DEPRECATED n
-        kernel_configure_variable SYSFS_DEPRECATED_V2 n
-        kernel_configure_variable HOTPLUG y
-        kernel_configure_variable UEVENT_HELPER_PATH "\"\""
-        kernel_configure_variable UNIX y
-        kernel_configure_variable SYSFS y
-        kernel_configure_variable PROC_FS y
-        kernel_configure_variable TMPFS y
-        kernel_configure_variable INOTIFY_USER y
-        kernel_configure_variable SIGNALFD y
-        kernel_configure_variable TMPFS_POSIX_ACL y
-        kernel_configure_variable BLK_DEV_BSG y
-        kernel_configure_variable DEVTMPFS y
-        kernel_configure_variable DEVTMPFS_MOUNT y
-    fi
-
-    # Newer inits like systemd need cgroup support
-    if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then
-        kernel_configure_variable CGROUP_SCHED y
-        kernel_configure_variable CGROUPS y
-        kernel_configure_variable CGROUP_NS y
-        kernel_configure_variable CGROUP_FREEZER y
-        kernel_configure_variable CGROUP_DEVICE y
-        kernel_configure_variable CPUSETS y
-        kernel_configure_variable PROC_PID_CPUSET y
-        kernel_configure_variable CGROUP_CPUACCT y
-        kernel_configure_variable RESOURCE_COUNTERS y
-    fi
-
-    # root-over-nfs-over-usb-eth support. Limited, but should cover some cases
-    # Enable this by setting a proper CMDLINE_NFSROOT_USB.
-    if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
-        oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
-        kernel_configure_variable INET y
-        kernel_configure_variable IP_PNP y
-        kernel_configure_variable USB_GADGET y
-        kernel_configure_variable USB_GADGET_SELECTED y
-        kernel_configure_variable USB_ETH y
-        kernel_configure_variable NFS_FS y
-        kernel_configure_variable ROOT_NFS y
-        kernel_configure_variable ROOT_NFS y
-        kernel_configure_variable CMDLINE "\"${CMDLINE_NFSROOT_USB}\""
-    fi
-    if [ ! -z "${KERNEL_INITRAMFS}" ]; then
-        kernel_configure_variable BLK_DEV_INITRD y
-        kernel_configure_variable INITRAMFS_SOURCE ""
-        kernel_configure_variable RD_GZIP y
-        kernel_configure_variable OVERLAY_FS y
-        kernel_configure_variable SQUASHFS y
-        kernel_configure_variable UBIFS_FS y
-    fi
-    # Activate CONFIG_LEGACY_PTYS
-    kernel_configure_variable LEGACY_PTYS y
-
-    # Activate the configuration options for VC4
-    VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
-    if [ ${VC4GRAPHICS} = "1" ]; then
-        kernel_configure_variable I2C_BCM2835 y
-        kernel_configure_variable DRM y
-        kernel_configure_variable DRM_FBDEV_EMULATION y
-        kernel_configure_variable DRM_VC4 y
-        kernel_configure_variable FB_BCM2708 n
-    fi
-
-    # Keep this the last line
-    # Remove all modified configs and add the rest to .config
-    sed -e "${CONF_SED_SCRIPT}" < '${WORKDIR}/defconfig' >> '${B}/.config'
-
-    yes '' | oe_runmake oldconfig
-}
-
-# Automatically depend on lzop-native if CONFIG_KERNEL_LZO is enabled
-python () {
-    try:
-        defconfig = bb.fetch2.localpath('file://defconfig', d)
-    except bb.fetch2.FetchError:
-        return
-
-    try:
-        configfile = open(defconfig)
-    except IOError:
-        return
-
-    if 'CONFIG_KERNEL_LZO=y\n' in configfile.readlines():
-        depends = d.getVar('DEPENDS', False)
-        d.setVar('DEPENDS', depends + ' lzop-native')
-
-    configfile.close()
-}

recipes-multimedia/gstreamer/gstreamer1.0-omx-1.10/0002-fix-decoder-flushing.patch

@@ -1,16 +0,0 @@
-diff --git a/omx/gstomx.c b/omx/gstomx.c
-index 69696c4..c382019 100644
---- a/omx/gstomx.c
-+++ b/omx/gstomx.c
-@@ -1508,8 +1508,8 @@ gst_omx_port_set_flushing (GstOMXPort * port, GstClockTime timeout,
-     last_error = OMX_ErrorNone;
-     gst_omx_component_handle_messages (comp);
-     while (signalled && last_error == OMX_ErrorNone && !port->flushed
--        && port->buffers
--        && port->buffers->len > g_queue_get_length (&port->pending_buffers)) {
-+     /* && port->buffers
-+        && port->buffers->len > g_queue_get_length (&port->pending_buffers) */) {
-       signalled = gst_omx_component_wait_message (comp, timeout);
-       if (signalled)
-         gst_omx_component_handle_messages (comp);
-

recipes-multimedia/gstreamer/gstreamer1.0-omx-1.10/0003-no-timeout-on-get-state.patch

@@ -1,16 +0,0 @@
-diff --git a/omx/gstomxvideodec.c b/omx/gstomxvideodec.c
-index 0d4e7a1..a0d9c74 100644
---- a/omx/gstomxvideodec.c
-+++ b/omx/gstomxvideodec.c
-@@ -1697,9 +1697,9 @@ gst_omx_video_dec_stop (GstVideoDecoder * decoder)
-   g_cond_broadcast (&self->drain_cond);
-   g_mutex_unlock (&self->drain_lock);
- 
--  gst_omx_component_get_state (self->dec, 5 * GST_SECOND);
-+  gst_omx_component_get_state (self->dec, 0);
- #if defined (USE_OMX_TARGET_RPI) && defined (HAVE_GST_GL)
--  gst_omx_component_get_state (self->egl_render, 1 * GST_SECOND);
-+  gst_omx_component_get_state (self->egl_render, 0);
- #endif
- 
-   gst_buffer_replace (&self->codec_data, NULL);