raspi/linux
1
0
Fork 1
mirror of https://github.com/raspberrypi/linux.git synced 2025-12-06 01:49:46 +00:00
Code Issues Projects Releases Wiki Activity

New overlay for PiScreen2r

Browse Source
This commit is contained in:
mwilliams03
2015-10-18 17:07:24 -07:00
committed by popcornmix
parent 6422bafd14
commit 05afaaa4dd
3 changed files with 115 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/boot/dts/overlays/Makefile
View File

@@ -35,6 +35,7 @@ dtb-$(RPI_DT_OVERLAYS) += mcp2515-can1-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += mmc-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += mz61581-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += piscreen-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += piscreen2r-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += pitft28-resistive-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += pps-gpio-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += pwm-overlay.dtb

14
arch/arm/boot/dts/overlays/README
View File

@@ -425,6 +425,20 @@ Params: speed Display SPI bus speed
xohms Touchpanel sensitivity (X-plate resistance)
Name: piscreen2r
Info: PiScreen 2 with resistive TP display by OzzMaker.com
Load: dtoverlay=piscreen2r,<param>=<val>
Params: speed Display SPI bus speed
rotate Display rotation {0,90,180,270}
fps Delay between frame updates
debug Debug output level {0-7}
xohms Touchpanel sensitivity (X-plate resistance)
Name: pitft28-resistive
Info: Adafruit PiTFT 2.8" resistive touch screen
Load: dtoverlay=pitft28-resistive,<param>=<val>

100
arch/arm/boot/dts/overlays/piscreen2r-overlay.dts Normal file
View File

@@ -0,0 +1,100 @@
/*
* Device Tree overlay for PiScreen2 3.5" TFT with resistive touch by Ozzmaker.com
*
*/
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
fragment@0 {
target = <&spi0>;
__overlay__ {
status = "okay";
spidev@0{
status = "disabled";
};
spidev@1{
status = "disabled";
};
};
};
fragment@1 {
target = <&gpio>;
__overlay__ {
piscreen2_pins: piscreen2_pins {
brcm,pins = <17 25 24 22>;
brcm,function = <0 1 1 1>; /* in out out out */
};
};
};
fragment@2 {
target = <&spi0>;
__overlay__ {
/* needed to avoid dtc warning */
#address-cells = <1>;
#size-cells = <0>;
piscreen2: piscreen2@0{
compatible = "ilitek,ili9486";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&piscreen2_pins>;
bgr;
spi-max-frequency = <64000000>;
rotate = <90>;
fps = <30>;
buswidth = <8>;
regwidth = <16>;
txbuflen = <32768>;
reset-gpios = <&gpio 25 0>;
dc-gpios = <&gpio 24 0>;
led-gpios = <&gpio 22 1>;
debug = <0>;
init = <0x10000b0 0x00
0x1000011
0x20000ff
0x100003a 0x55
0x1000036 0x28
0x10000c0 0x11 0x09
0x10000c1 0x41
0x10000c5 0x00 0x00 0x00 0x00
0x10000b6 0x00 0x02
0x10000f7 0xa9 0x51 0x2c 0x2
0x10000be 0x00 0x04
0x10000e9 0x00
0x1000011
0x1000029>;
};
piscreen2_ts: piscreen2-ts@1 {
compatible = "ti,ads7846";
reg = <1>;
spi-max-frequency = <2000000>;
interrupts = <17 2>; /* high-to-low edge triggered */
interrupt-parent = <&gpio>;
pendown-gpio = <&gpio 17 0>;
ti,swap-xy;
ti,x-plate-ohms = /bits/ 16 <100>;
ti,pressure-max = /bits/ 16 <255>;
};
};
};
__overrides__ {
speed = <&piscreen2>,"spi-max-frequency:0";
rotate = <&piscreen2>,"rotate:0";
fps = <&piscreen2>,"fps:0";
debug = <&piscreen2>,"debug:0";
xohms = <&piscreen2_ts>,"ti,x-plate-ohms;0";
};
};