Added hwmon/thermal driver for reporting core temperature. Thanks Dorian

BCM270x: Move thermal sensor to Device Tree

Add Device Tree support to bcm2835-thermal driver.
Add thermal sensor device to Device Tree.
Don't add platform device when booting in DT mode.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>

drivers/thermal/Kconfig

@@ -302,6 +302,13 @@ config INTEL_POWERCLAMP
 	  enforce idle time which results in more package C-state residency. The
 	  user interface is exposed via generic thermal framework.
 
+config THERMAL_BCM2835
+	depends on RASPBERRYPI_FIRMWARE
+	tristate "BCM2835 Thermal Driver"
+	help
+	  This will enable temperature monitoring for the Broadcom BCM2835
+	  chip. If built as a module, it will be called 'bcm2835-thermal'.
+
 config X86_PKG_TEMP_THERMAL
 	tristate "X86 package temperature thermal driver"
 	depends on X86_THERMAL_VECTOR

drivers/thermal/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_MAX77620_THERMAL)	+= max77620_thermal.o
 obj-$(CONFIG_QORIQ_THERMAL)	+= qoriq_thermal.o
 obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
 obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
+obj-$(CONFIG_THERMAL_BCM2835)	+= bcm2835-thermal.o
 obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
 obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE)	+= intel_soc_dts_iosf.o
 obj-$(CONFIG_INTEL_SOC_DTS_THERMAL)	+= intel_soc_dts_thermal.o

drivers/thermal/bcm2835-thermal.c

@@ -0,0 +1,109 @@
+/*****************************************************************************
+* Copyright 2011 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+static int bcm2835_thermal_get_property(struct thermal_zone_device *tz,
+					int *temp, u32 tag)
+{
+	struct rpi_firmware *fw = tz->devdata;
+	struct {
+		u32 id;
+		u32 val;
+	} packet;
+	int ret;
+
+	*temp = 0;
+	packet.id = 0;
+	ret = rpi_firmware_property(fw, tag, &packet, sizeof(packet));
+	if (ret) {
+		dev_err(&tz->device, "Failed to get temperature\n");
+		return ret;
+	}
+
+	*temp = packet.val;
+	dev_dbg(&tz->device, "%stemp=%d\n",
+		tag == RPI_FIRMWARE_GET_MAX_TEMPERATURE ? "max" : "", *temp);
+
+	return 0;
+}
+
+static int bcm2835_thermal_get_temp(struct thermal_zone_device *tz,
+				    int *temp)
+{
+	return bcm2835_thermal_get_property(tz, temp,
+					    RPI_FIRMWARE_GET_TEMPERATURE);
+}
+
+static struct thermal_zone_device_ops ops  = {
+	.get_temp = bcm2835_thermal_get_temp,
+};
+
+static int bcm2835_thermal_probe(struct platform_device *pdev)
+{
+	struct device_node *fw_np;
+	struct rpi_firmware *fw;
+	struct thermal_zone_device *tz;
+
+	fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0);
+	if (!fw_np) {
+		dev_err(&pdev->dev, "Missing firmware node\n");
+		return -ENOENT;
+	}
+	fw = rpi_firmware_get(fw_np);
+	if (!fw)
+		return -EPROBE_DEFER;
+
+	tz = thermal_zone_device_register("bcm2835_thermal", 0, 0, fw, &ops,
+					  NULL, 0, 0);
+	if (IS_ERR(tz)) {
+		dev_err(&pdev->dev, "Failed to register the thermal device\n");
+		return PTR_ERR(tz);
+	}
+
+	platform_set_drvdata(pdev, tz);
+
+	return 0;
+}
+
+static int bcm2835_thermal_remove(struct platform_device *pdev)
+{
+	thermal_zone_device_unregister(platform_get_drvdata(pdev));
+
+	return 0;
+}
+
+static const struct of_device_id bcm2835_thermal_of_match_table[] = {
+	{ .compatible = "brcm,bcm2835-thermal", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_thermal_of_match_table);
+
+static struct platform_driver bcm2835_thermal_driver = {
+	.probe = bcm2835_thermal_probe,
+	.remove = bcm2835_thermal_remove,
+	.driver = {
+		.name = "bcm2835_thermal",
+		.of_match_table = bcm2835_thermal_of_match_table,
+	},
+};
+module_platform_driver(bcm2835_thermal_driver);
+
+MODULE_AUTHOR("Dorian Peake");
+MODULE_AUTHOR("Noralf Trønnes");
+MODULE_DESCRIPTION("Thermal driver for bcm2835 chip");
+MODULE_LICENSE("GPL");