When the imx500 driver is used as part of the 'AI Camera', the poweroff
state is never reached as the camera and gpio driver share a regulator.
By releasing the GPIOs when they are not in use, 'AI Camera' is able to
achieve a powered-down state.
Signed-off-by: Richard Oliver <richard.oliver@raspberrypi.com>
This change amends various error-paths in imx500_start_streaming() to
ensure that pm_runtime refcounts do not remain erroneously incremented
on failure.
Signed-off-by: Richard Oliver <richard.oliver@raspberrypi.com>
The clock using by IMX500 in 'AI Camera' is gpio-gated. The GPIO used is
provided by an I2C-controlled rpi-rp2040-gpio-bridge on 'AI Camera'.
Both the IMX500 and gpio-bridge share a common regulator for their power
supply. Using 'gpio-gate-clock', the 'AI Camera' will never be
powered-down as the GPIO provided by the gpio-bridge is always claimed
by the clock driver. Switching to 'gpio-gate-clock-releasing' causes the
GPIO to be released by the clock driver when the clock is not needed.
This allows 'AI Camera' to be powered-down.
Signed-off-by: Richard Oliver <richard.oliver@raspberrypi.com>
Document the gpio-gate-clock-releasing compatible string that enables
acquire/release GPIO semantics on gpio-gated clocks.
Signed-off-by: Richard Oliver <richard.oliver@raspberrypi.com>
Add support for the 'gpio-gate-clock-releasing' compatible string. The
behaviour is identical to that of 'gpio-gate-clock' but the gpio is
acquired on 'enable' and released on 'disable'.
Signed-off-by: Richard Oliver <richard.oliver@raspberrypi.com>
Due to possible instabilities, reduce the mmap read lock time to only
cover the call to find_vdma().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Currently four nearly identical overlays (sc16is750-spi0 / -spi1
and sc16is752-spi0 / -spi1) are provided. Besides the redundant
configuration all of them lack support for other SPI interfaces
than spi0 and spi1.
Thus refactor the common definitions into a generic sc16is75x-spi
overlay which provides support for all known spi / cs combinations.
Also choose the chip type via dtparam rather than different overlay.
Remove the existing overlays, replacing them with rename rules in the
overlay map.
Signed-off-by: Nicolai Buchwitz <n.buchwitz@kunbus.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Now that the current trees are passing the thorough/try-all mode of
overlaycheck (mainly by excluding trying to apply the vl805 overlay
on a CM4S), use it in the build checks.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
commit 4aaffc8575 upstream.
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178
Fixes: 2965e6355d ("drm/amd: Add Suspend/Hibernate notification callback support")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 06f2dcc241)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 364618c89d upstream.
This patch introduces the ucsi_con_mutex_lock / ucsi_con_mutex_unlock
functions to the UCSI driver. ucsi_con_mutex_lock ensures the connector
mutex is only locked if a connection is established and the partner pointer
is valid. This resolves a deadlock scenario where
ucsi_displayport_remove_partner holds con->mutex waiting for
dp_altmode_work to complete while dp_altmode_work attempts to acquire it.
Cc: stable <stable@kernel.org>
Fixes: af8622f6a5 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250424084429.3220757-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c1798259b upstream.
Since commit 559358282e ("drm/fb-helper: Don't use the preferred depth
for the BPP default"), RGB565 displays such as the CFAF240320X no longer
render correctly: colors are distorted and the content is shown twice
horizontally.
This regression is due to the fbdev emulation layer defaulting to 32 bits
per pixel, whereas the display expects 16 bpp (RGB565). As a result, the
framebuffer data is incorrectly interpreted by the panel.
Fix the issue by calling drm_client_setup_with_fourcc() with a format
explicitly selected based on the display's bits-per-pixel value. For 16
bpp, use DRM_FORMAT_RGB565; for other values, fall back to the previous
behavior. This ensures that the allocated framebuffer format matches the
hardware expectations, avoiding color and layout corruption.
Tested on a CFAF240320X display with an RGB565 configuration, confirming
correct colors and layout after applying this patch.
Cc: stable@vger.kernel.org
Fixes: 559358282e ("drm/fb-helper: Don't use the preferred depth for the BPP default")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250417103458.2496790-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f063a28002 upstream.
The threaded IRQ function in this driver is reading the flag twice: once to
lock a mutex and once to unlock it. Even though the code setting the flag
is designed to prevent it, there are subtle cases where the flag could be
true at the mutex_lock stage and false at the mutex_unlock stage. This
results in the mutex not being unlocked, resulting in a deadlock.
Fix it by making the opt3001_irq() code generally more robust, reading the
flag into a variable and using the variable value at both stages.
Fixes: 94a9b7b180 ("iio: light: add support for TI's opt3001 light sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20250321-opt3001-irq-fix-v1-1-6c520d851562@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[Fixed conflict while applying on 6.12]
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fefc075182 upstream.
The page allocator tracks the number of zones that have unaccepted memory
using static_branch_enc/dec() and uses that static branch in hot paths to
determine if it needs to deal with unaccepted memory.
Borislav and Thomas pointed out that the tracking is racy: operations on
static_branch are not serialized against adding/removing unaccepted pages
to/from the zone.
Sanity checks inside static_branch machinery detects it:
WARNING: CPU: 0 PID: 10 at kernel/jump_label.c:276 __static_key_slow_dec_cpuslocked+0x8e/0xa0
The comment around the WARN() explains the problem:
/*
* Warn about the '-1' case though; since that means a
* decrement is concurrent with a first (0->1) increment. IOW
* people are trying to disable something that wasn't yet fully
* enabled. This suggests an ordering problem on the user side.
*/
The effect of this static_branch optimization is only visible on
microbenchmark.
Instead of adding more complexity around it, remove it altogether.
Link: https://lkml.kernel.org/r/20250506133207.1009676-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: dcdfdd40fa ("mm: Add support for unaccepted memory")
Link: https://lore.kernel.org/all/20250506092445.GBaBnVXXyvnazly6iF@fat_crate.local
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03552d8ac0 upstream.
The workqueue used for the reset worker is marked as WQ_MEM_RECLAIM,
while the GSC one isn't (and can't be as we need to do memory
allocations in the gsc worker). Therefore, we can't flush the latter
from the former.
The reason why we had such a flush was to avoid interrupting either
the GSC FW load or in progress GSC proxy operations. GSC proxy
operations fall into 2 categories:
1) GSC proxy init: this only happens once immediately after GSC FW load
and does not support being interrupted. The only way to recover from
an interruption of the proxy init is to do an FLR and re-load the GSC.
2) GSC proxy request: this can happen in response to a request that
the driver sends to the GSC. If this is interrupted, the GSC FW will
timeout and the driver request will be failed, but overall the GSC
will keep working fine.
Flushing the work allowed us to avoid interruption in both cases (unless
the hang came from the GSC engine itself, in which case we're toast
anyway). However, a failure on a proxy request is tolerable if we're in
a scenario where we're triggering a GT reset (i.e., something is already
gone pretty wrong), so what we really need to avoid is interrupting
the init flow, which we can do by polling on the register that reports
when the proxy init is complete (as that ensure us that all the load and
init operations have been completed).
Note that during suspend we still want to do a flush of the worker to
make sure it completes any operations involving the HW before the power
is cut.
v2: fix spelling in commit msg, rename waiter function (Julia)
Fixes: dd0e89e5ed ("drm/xe/gsc: GSC FW load")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4830
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://lore.kernel.org/r/20250502155104.2201469-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 12370bfcc4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db363b0a1d upstream.
In the current implementation, the SMB filesystem on a mount point can
trigger upcalls from the kernel to the userspace to enable certain
functionalities like spnego, dns_resolution, amongst others. These upcalls
usually either happen in the context of the mount or in the context of an
application/user. The upcall handler for cifs, cifs.upcall already has
existing code which switches the namespaces to the caller's namespace
before handling the upcall. This behaviour is expected for scenarios like
multiuser mounts, but might not cover all single user scenario with
services such as Kubernetes, where the mount can happen from different
locations such as on the host, from an app container, or a driver pod
which does the mount on behalf of a different pod.
This patch introduces a new mount option called upcall_target, to
customise the upcall behaviour. upcall_target can take 'mount' and 'app'
as possible values. This aids use cases like Kubernetes where the mount
happens on behalf of the application in another container altogether.
Having this new mount option allows the mount command to specify where the
upcall should happen: 'mount' for resolving the upcall to the host
namespace, and 'app' for resolving the upcall to the ns of the calling
thread. This will enable both the scenarios where the Kerberos credentials
can be found on the application namespace or the host namespace to which
just the mount operation is "delegated".
Reviewed-by: Shyam Prasad <shyam.prasad@microsoft.com>
Reviewed-by: Bharath S M <bharathsm@microsoft.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ca9590c39 upstream.
Currently, a local dma_cap_mask_t variable is used to store device
cap_mask within udma_of_xlate(). However, the DMA_PRIVATE flag in
the device cap_mask can get cleared when the last channel is released.
This can happen right after storing the cap_mask locally in
udma_of_xlate(), and subsequent dma_request_channel() can fail due to
mismatch in the cap_mask. Fix this by removing the local dma_cap_mask_t
variable and directly using the one from the dma_device structure.
Fixes: 25dcb5dd7b ("dmaengine: ti: New driver for K3 UDMA")
Cc: stable@vger.kernel.org
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Link: https://lore.kernel.org/r/20250417075521.623651-1-y-abhilashchandra@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b3ab7f2cb upstream.
After a recent change [1] in clang's randstruct implementation to
randomize structures that only contain function pointers, there is an
error because qede_ll_ops get randomized but does not use a designated
initializer for the first member:
drivers/net/ethernet/qlogic/qede/qede_main.c:206:2: error: a randomized struct can only be initialized with a designated initializer
206 | {
| ^
Explicitly initialize the common member using a designated initializer
to fix the build.
Cc: stable@vger.kernel.org
Fixes: 035f7f87b7 ("randstruct: Enable Clang support")
Link: 04364fb888 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250507-qede-fix-clang-randstruct-v1-1-5ccc15626fba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d6c39c89f upstream.
The ring buffer is made up of sub buffers (sometimes called pages as they
are by default PAGE_SIZE). It has the following "pages":
"tail page" - this is the page that the next write will write to
"head page" - this is the page that the reader will swap the reader page with.
"reader page" - This belongs to the reader, where it will swap the head
page from the ring buffer so that the reader does not
race with the writer.
The writer may end up on the "reader page" if the ring buffer hasn't
written more than one page, where the "tail page" and the "head page" are
the same.
The persistent ring buffer has meta data that points to where these pages
exist so on reboot it can re-create the pointers to the cpu_buffer
descriptor. But when the commit page is on the reader page, the logic is
incorrect.
The check to see if the commit page is on the reader page checked if the
head page was the reader page, which would never happen, as the head page
is always in the ring buffer. The correct check would be to test if the
commit page is on the reader page. If that's the case, then it can exit
out early as the commit page is only on the reader page when there's only
one page of data in the buffer. There's no reason to iterate the ring
buffer pages to find the "commit page" as it is already found.
To trigger this bug:
# echo 1 > /sys/kernel/tracing/instances/boot_mapped/events/syscalls/sys_enter_fchownat/enable
# touch /tmp/x
# chown sshd /tmp/x
# reboot
On boot up, the dmesg will have:
Ring buffer meta [0] is from previous boot!
Ring buffer meta [1] is from previous boot!
Ring buffer meta [2] is from previous boot!
Ring buffer meta [3] is from previous boot!
Ring buffer meta [4] commit page not found
Ring buffer meta [5] is from previous boot!
Ring buffer meta [6] is from previous boot!
Ring buffer meta [7] is from previous boot!
Where the buffer on CPU 4 had a "commit page not found" error and that
buffer is cleared and reset causing the output to be empty and the data lost.
When it works correctly, it has:
# cat /sys/kernel/tracing/instances/boot_mapped/trace_pipe
<...>-1137 [004] ..... 998.205323: sys_enter_fchownat: __syscall_nr=0x104 (260) dfd=0xffffff9c (4294967196) filename=(0xffffc90000a0002c) user=0x3e8 (1000) group=0xffffffff (4294967295) flag=0x0 (0
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250513115032.3e0b97f7@gandalf.local.home
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78ab4be549 upstream.
A warning on driver removal started occurring after commit 9dd05df840
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().
WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100
CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy)
Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024
RIP: 0010:__netif_napi_del_locked+0xf0/0x100
Call Trace:
<TASK>
mt76_dma_cleanup+0x54/0x2f0 [mt76]
mt7921_pci_remove+0xd5/0x190 [mt7921e]
pci_device_remove+0x47/0xc0
device_release_driver_internal+0x19e/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xb0
__do_sys_delete_module.isra.0+0x197/0x2e0
do_syscall_64+0x7b/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2ac515a5d7 ("mt76: mt76x02: use napi polling for tx cleanup")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fe4a44b7f upstream.
The response buffer for the CREATE request handled by smb311_posix_mkdir()
is leaked on the error path (goto err_free_rsp_buf) because the structure
pointer *rsp passed to free_rsp_buf() is not assigned until *after* the
error condition is checked.
As *rsp is initialised to NULL, free_rsp_buf() becomes a no-op and the leak
is instead reported by __kmem_cache_shutdown() upon subsequent rmmod of
cifs.ko if (and only if) the error path has been hit.
Pass rsp_iov.iov_base to free_rsp_buf() instead, similar to the code in
other functions in smb2pdu.c for which *rsp is assigned late.
Cc: stable@vger.kernel.org
Signed-off-by: Jethro Donaldson <devel@jro.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8007fad54 upstream.
The REPORT ZONES buffer size is currently limited by the HBA's maximum
segment count to ensure the buffer can be mapped. However, the block
layer further limits the number of iovec entries to 1024 when allocating
a bio.
To avoid allocation of buffers too large to be mapped, further restrict
the maximum buffer size to BIO_MAX_INLINE_VECS.
Replace the UIO_MAXIOV symbolic name with the more contextually
appropriate BIO_MAX_INLINE_VECS.
Fixes: b091ac6168 ("sd_zbc: Fix report zones buffer allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Siwinski <ssiwinski@atto.com>
Link: https://lore.kernel.org/r/20250508200122.243129-1-ssiwinski@atto.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54c4c58713 upstream.
It has been observed on the Renesas RZ/G3S SoC that unbinding and binding
the PHY driver leads to role autodetection failures. This issue occurs when
PHY 3 is the first initialized PHY. PHY 3 does not have an interrupt
associated with the USB2_INT_ENABLE register (as
rcar_gen3_int_enable[3] = 0). As a result, rcar_gen3_init_otg() is called
to initialize OTG without enabling PHY interrupts.
To resolve this, add rcar_gen3_is_any_otg_rphy_initialized() and call it in
role_store(), role_show(), and rcar_gen3_init_otg(). At the same time,
rcar_gen3_init_otg() is only called when initialization for a PHY with
interrupt bits is in progress. As a result, the
struct rcar_gen3_phy::otg_initialized is no longer needed.
Fixes: 549b6b55b0 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs")
Cc: stable@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250507125032.565017-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
