Dinh writes:
firmware: stratix10-svc: fix saving contoller data for v6.18
- Fix the incorrect use of platform_set_drvdata and dev_set_drvdata
* tag 'stratix10_svc_fix_v6.18' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (237 commits)
firmware: stratix10-svc: fix bug in saving controller data
Linux 6.18-rc4
objtool: Fix skip_alt_group() for non-alternative STAC/CLAC
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
x86/mm: Ensure clear_page() variants always have __kcfi_typeid_ symbols
PCI: Do not size non-existing prefetchable window
Revert "PCI: qcom: Remove custom ASPM enablement code"
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
null_blk: set dma alignment to logical block size
xfs: document another racy GC case in xfs_zoned_map_extent
xfs: prevent gc from picking the same zone twice
drm/ast: Clear preserved bits from register output value
s390: Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
drm/imx: parallel-display: add the bridge before attaching it
drm/imx: parallel-display: convert to devm_drm_bridge_alloc() API
blk-crypto: use BLK_STS_INVAL for alignment errors
regulator: bd718x7: Fix voltages scaled by resistor divider
x86/cpu: Add/fix core comments for {Panther,Nova} Lake
...
Jonathan writes:
IIO: Fixes for 6.18 (set 1)
The usual mixed back of brand new and ancient bugs.
dmaengine buffer / core
- Add new callback to allow fetching the providing device for a DMA
channel. Use this to get the right device for the dmaengine buffer
implementation.
adi,ad4030
- Fix incorrect _scale value for common-mode channels.
adi,ad7124
- Fix gain and offset for temperature channel.
adi,ad7280a
- Fix a factor of 10 error when setting the balance timer.
adi,ad7380
- Fix sampling frequency to account for need to trigger twice per scan
for some supported chips.
adi,adxl355
- Ensure a long enough wait after SW reset.
bosch,bmc150
- Fix wrong assumption that interrupts are always available.
bosch,bmp280
- Fix the measurement time calculation.
richtek,rtq6056
- Fix wrong sign bit when sign extending.
samsung,ssp
- Fix cleanup of registered mfd devices on error.
st,lsm6dsx
- Fix wrong sized array for register information.
- Fix a wrong time stamp calculation for some devices.
st,stm32-dfsdm
- Update handling of st,adc-alt-channel to reflect binding change as
part of moving to iio-backend framework.
ti,hdc3020
- Fix wrong units for temperature and humidity. Also the thresholds
and hysteresis.
* tag 'iio-fixes-for-6.18a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: accel: bmc150: Fix irq assumption regression
iio: st_lsm6dsx: Fixed calibrated timestamp calculation
iio: humditiy: hdc3020: fix units for thresholds and hysteresis
iio: humditiy: hdc3020: fix units for temperature and humidity measurement
iio: imu: st_lsm6dsx: fix array size for st_lsm6dsx_settings fields
iio: accel: fix ADXL355 startup race condition
iio: adc: ad7124: fix temperature channel
iio:common:ssp_sensors: Fix an error handling path ssp_probe()
iio: adc: ad7280a: fix ad7280_store_balance_timer()
iio: buffer-dmaengine: enable .get_dma_dev()
iio: buffer-dma: support getting the DMA channel
iio: buffer: support getting dma channel from the buffer
iio: pressure: bmp280: correct meas_time_us calculation
iio: adc: stm32-dfsdm: fix st,adc-alt-channel property handling
iio: adc: ad7380: fix SPI offload trigger rate
iio: adc: rtq6056: Correct the sign bit index
iio: adc: ad4030: Fix _scale value for common-mode channels
The code in bmc150-accel-core.c unconditionally calls
bmc150_accel_set_interrupt() in the iio_buffer_setup_ops,
such as on the runtime PM resume path giving a kernel
splat like this if the device has no interrupts:
Unable to handle kernel NULL pointer dereference at virtual
address 00000001 when read
PC is at bmc150_accel_set_interrupt+0x98/0x194
LR is at __pm_runtime_resume+0x5c/0x64
(...)
Call trace:
bmc150_accel_set_interrupt from bmc150_accel_buffer_postenable+0x40/0x108
bmc150_accel_buffer_postenable from __iio_update_buffers+0xbe0/0xcbc
__iio_update_buffers from enable_store+0x84/0xc8
enable_store from kernfs_fop_write_iter+0x154/0x1b4
This bug seems to have been in the driver since the beginning,
but it only manifests recently, I do not know why.
Store the IRQ number in the state struct, as this is a common
pattern in other drivers, then use this to determine if we have
IRQ support or not.
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The MOST subsystem has a non-standard registration function which frees
the interface on registration failures and on deregistration.
This unsurprisingly leads to bugs in the MOST drivers, and a couple of
recent changes turned a reference underflow and use-after-free in the
USB driver into several double free and a use-after-free on late probe
failures.
Fixes: 723de0f917 ("staging: most: remove device from interface structure")
Fixes: 4b12709026 ("most: usb: Fix use-after-free in hdm_disconnect")
Fixes: a8cc9e5fcb ("most: usb: hdm_probe: Fix calling put_device() before device initialization")
Cc: stable@vger.kernel.org
Cc: Christian Gromm <christian.gromm@microchip.com>
Cc: Victoria Votokina <Victoria.Votokina@kaspersky.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251029093029.28922-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function qcom_slim_ngd_notify_slaves() calls of_slim_get_device() which
internally uses device_find_child() to obtain a device reference.
According to the device_find_child() documentation,
the caller must drop the reference with put_device() after use.
Found via static analysis and this is similar to commit 4e65bda827
("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
Fixes: 917809e228 ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251027060601.33228-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They
both are of the same data and overrides each other. This resulted in the
rmmod of the svc driver to fail and throw a kernel panic for kthread_stop
and fifo free.
Fixes: b5dc75c915 ("firmware: stratix10-svc: extend svc to support new RSU features")
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Ang Tien Sung <tiensung.ang@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Pull spi fix from Mark Brown:
"One new device ID for an Intel SoC"
* tag 'spi-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: intel: Add support for Oak Stream SPI serial flash
Pull regulator fix from Mark Brown:
"A simple fix for a missed part of an API conversion in the bd718x7
driver"
* tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: bd718x7: Fix voltages scaled by resistor divider
Pull regmap fixes from Mark Brown:
"One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers"
* tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Correct documentation of wake_invert flag
regmap: slimbus: fix bus_context pointer in regmap init calls
Pull misc x86 fixes from Ingo Molnar:
- Limit AMD microcode Entrysign sha256 signature checking to
known CPU generations
- Disable AMD RDSEED32 on certain Zen5 CPUs that have a
microcode version before when the microcode-based fix was
issued for the AMD-SB-7055 erratum
- Fix FPU AMD XFD state synchronization on signal delivery
- Fix (work around) a SSE4a-disassembly related build failure
on X86_NATIVE_CPU=y builds
- Extend the AMD Zen6 model space with a new range of models
- Fix <asm/intel-family.h> CPU model comments
- Fix the CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y build, which
was unhappy due to missing kCFI type annotations of clear_page()
variants
* tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Ensure clear_page() variants always have __kcfi_typeid_ symbols
x86/cpu: Add/fix core comments for {Panther,Nova} Lake
x86/CPU/AMD: Extend Zen6 model range
x86/build: Disable SSE4a
x86/fpu: Ensure XFD state on signal delivery
x86/CPU/AMD: Add RDSEED fix for Zen5
x86/microcode/AMD: Limit Entrysign signature checking to known generations
Pull perf event fixes from Ingo Molnar:
"Miscellaneous fixes and CPU model updates:
- Fix an out-of-bounds access on non-hybrid platforms in the Intel
PMU DS code, reported by KASAN
- Add WildcatLake PMU and uncore support: it's identical to the
PantherLake version"
* tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add uncore PMU support for Wildcat Lake
perf/x86/intel: Add PMU support for WildcatLake
perf/x86/intel: Fix KASAN global-out-of-bounds warning
Pull objtool fix from Ingo Molnar:
"Fix objtool warning when faced with raw STAC/CLAC instructions"
* tag 'objtool-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix skip_alt_group() for non-alternative STAC/CLAC
Pull xfs fixes from Carlos Maiolino:
"Just a single bug fix (and documentation for the issue)"
* tag 'xfs-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document another racy GC case in xfs_zoned_map_extent
xfs: prevent gc from picking the same zone twice
Pull Kbuild fixes from Nathan Chancellor:
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support
for it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
* tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
KMSAN: Restore dynamic check for '-fsanitize=kernel-memory'
kbuild: align modinfo section for Secureboot Authenticode EDK2 compat
kbuild: install-extmod-build: Fix when given dir outside the build dir
MAINTAINERS: Update Kconfig section
Fix bug where make nconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014144405.3975275-2-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Fix bug where make menuconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014154933.3990990-1-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Mark migrate_disable/enable() as always_inline to avoid issues with
partial inlining (Yonghong Song)
- Fix powerpc stack register definition in libbpf bpf_tracing.h (Andrii
Nakryiko)
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
When building with CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y, there is a series
of errors from the various versions of clear_page() not having __kcfi_typeid_
symbols.
$ cat kernel/configs/repro.config
CONFIG_CFI=y
# CONFIG_LTO_NONE is not set
CONFIG_LTO_CLANG_FULL=y
$ make -skj"$(nproc)" ARCH=x86_64 LLVM=1 clean defconfig repro.config bzImage
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_rep
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_rep)
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_orig
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_orig)
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_erms
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_erms)
With full LTO, it is possible for LLVM to realize that these functions never
have their address taken (as they are only used within an alternative, which
will make them a direct call) across the whole kernel and either drop or skip
generating their kCFI type identification symbols.
clear_page_{rep,orig,erms}() are defined in clear_page_64.S with
SYM_TYPED_FUNC_START as a result of
2981557cb0 ("x86,kcfi: Fix EXPORT_SYMBOL vs kCFI"),
as exported functions are free to be called indirectly thus need kCFI type
identifiers.
Use KCFI_REFERENCE with these clear_page() functions to force LLVM to see
these functions as address-taken and generate then keep the kCFI type
identifiers.
Fixes: 2981557cb0 ("x86,kcfi: Fix EXPORT_SYMBOL vs kCFI")
Closes: https://github.com/ClangBuiltLinux/linux/issues/2128
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patch.msgid.link/20251013-x86-fix-clear_page-cfi-full-lto-errors-v1-1-d69534c0be61@kernel.org
Pull drm fixes from Simona Vetter:
"Looks like stochastics conspired to make this one a bit bigger, but
nothing scary at all. Also first examples of the new Link: tags, yay!
Next week Dave should be back.
Drivers:
- mediatek: uaf in unbind, fixes -rc2 boot regression
- radeon: devm conversion fixes
- amdgpu: VPE idle handler, re-enable DM idle optimization, DCN3,
SMU, vblank, HDP eDP, powerplay fixes for fiji/iceland
- msm: bunch of gem error path fixes, gmu fw parsing fix, dpu fixes
- intel: fix dmc/dc6 asserts on ADL-S
- xe: fix xe_validation_guard(), wake device handling around gt reset
- ast: fix display output on AST2300
- etnaviv: fix gpu flush
- imx: fix parallel bridge handling
- nouveau: scheduler locking fix
- panel: fixes for kingdisplay-kd097d04 and sitronix-st7789v
Core Changes:
- CI: disable broken sanity job
- sysfb: fix NULL pointer access
- sched: fix SIGKILL handling, locking for race condition
- dma_fence: better timeline name for signalled fences"
* tag 'drm-fixes-2025-10-31' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/ast: Clear preserved bits from register output value
drm/imx: parallel-display: add the bridge before attaching it
drm/imx: parallel-display: convert to devm_drm_bridge_alloc() API
drm/panel: kingdisplay-kd097d04: Disable EoTp
drm/panel: sitronix-st7789v: fix sync flags for t28cp45tn89
drm/xe: Do not wake device during a GT reset
drm/xe: Fix uninitialized return value from xe_validation_guard()
drm/msm/dpu: Fix adjusted mode clock check for 3d merge
drm/msm/dpu: Disable broken YUV on QSEED2 hardware
drm/msm/dpu: Require linear modifier for writeback framebuffers
drm/msm/dpu: Fix pixel extension sub-sampling
drm/msm/dpu: Disable scaling for unsupported scaler types
drm/msm/dpu: Propagate error from dpu_assign_plane_resources
drm/msm/dpu: Fix allocation of RGB SSPPs without scaling
drm/msm: dsi: fix PLL init in bonded mode
drm/i915/dmc: Clear HRR EVT_CTL/HTP to zero on ADL-S
drm/amd/display: Fix incorrect return of vblank enable on unconfigured crtc
drm/amd/display: Add HDR workaround for a specific eDP
drm/amdgpu: fix SPDX header on cyan_skillfish_reg_init.c
drm/amdgpu: fix SPDX header on irqsrcs_vcn_5_0.h
...
Pull pci fixes from Bjorn Helgaas:
- Restore custom qcom ASPM enablement code so L1 PM Substates are
enabled as they were in v6.17 even though the PCI core now enables
just L0s and L1 by default (Bjorn Helgaas)
- Size prefetchable bridge windows only when they actually exist, to
avoid a WARN_ON() regression (Ilpo Järvinen)
* tag 'pci-v6.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Do not size non-existing prefetchable window
Revert "PCI: qcom: Remove custom ASPM enablement code"
Pull VFIO fixes from Alex Williamson:
- Fix overflows in vfio type1 backend for mappings at the end of the
64-bit address space, resulting in leaked pinned memory.
New selftest support included to avoid such issues in the future
(Alex Mastro)
* tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio:
vfio: selftests: add end of address space DMA map/unmap tests
vfio: selftests: update DMA map/unmap helpers to support more test kinds
vfio/type1: handle DMA map/unmap up to the addressable limit
vfio/type1: move iova increment to unmap_unpin_*() caller
vfio/type1: sanitize for overflow using check_*_overflow()
pbus_size_mem() should only be called for bridge windows that exist but
__pci_bus_size_bridges() may point 'pref' to a resource that does not exist
(has zero flags) in case of non-root buses.
When prefetchable bridge window does not exist, the same non-prefetchable
bridge window is sized more than once which may result in duplicating
entries into the realloc_head list. Duplicated entries are shown in this
log and trigger a WARN_ON() because realloc_head had residual entries after
the resource assignment algorithm:
pci 0000:00:03.0: [11ab:6820] type 01 class 0x060400 PCIe Root Port
pci 0000:00:03.0: PCI bridge to [bus 00]
pci 0000:00:03.0: bridge window [io 0x0000-0x0fff]
pci 0000:00:03.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:00:03.0: bridge window [mem 0x00200000-0x003fffff] to [bus 02] add_size 200000 add_align 200000
pci 0000:00:03.0: bridge window [mem 0x00200000-0x003fffff] to [bus 02] add_size 200000 add_align 200000
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe03fffff]: assigned
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe03fffff]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/pci/setup-bus.c:2373 pci_assign_unassigned_root_bus_resources+0x1bc/0x234
Check resource flags of 'pref' and only size the prefetchable window if the
resource has the IORESOURCE_PREFETCH flag.
Fixes: ae88d0b9c5 ("PCI: Use pbus_select_window_for_type() during mem window sizing")
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Closes: https://lore.kernel.org/r/51e8cf1c62b8318882257d6b5a9de7fdaaecc343.camel@gmail.com/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Link: https://patch.msgid.link/20251027132423.8841-1-ilpo.jarvinen@linux.intel.com
This reverts commit a729c16646.
Prior to a729c16646 ("PCI: qcom: Remove custom ASPM enablement code"),
the qcom controller driver enabled ASPM, including L0s, L1, and L1 PM
Substates, for all devices powered on at the time the controller driver
enumerates them.
ASPM was *not* enabled for devices powered on later by pwrctrl (unless the
kernel was built with PCIEASPM_POWERSAVE or PCIEASPM_POWER_SUPERSAVE, or
the user enabled ASPM via module parameter or sysfs).
After f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and ASPM states for
devicetree platforms"), the PCI core enabled all ASPM states for all
devices whether powered on initially or by pwrctrl, so a729c16646 was
unnecessary and reverted.
But f3ac2ff148 was too aggressive and broke platforms that didn't support
CLKREQ# or required device-specific configuration for L1 Substates, so
df5192d9bb ("PCI/ASPM: Enable only L0s and L1 for devicetree platforms")
enabled only L0s and L1.
On Qualcomm platforms, this left L1 Substates disabled, which was a
regression. Revert a729c16646 so L1 Substates will be enabled on devices
that are initially powered on. Devices powered on by pwrctrl will be
addressed later.
Fixes: df5192d9bb ("PCI/ASPM: Enable only L0s and L1 for devicetree platforms")
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/lkml/aPuXZlaawFmmsLmX@hovoldconsulting.com/
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251024210514.1365996-1-helgaas@kernel.org
Pull block fixes from Jens Axboe:
- Fix blk-crypto reporting EIO when EINVAL is the correct error code
- Two bug fixes for the block zone support
- NVME pull request via Keith:
- Target side authentication fixup
- Peer-to-peer metadata fixup
- null_blk DMA alignment fix
* tag 'block-6.18-20251031' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
null_blk: set dma alignment to logical block size
blk-crypto: use BLK_STS_INVAL for alignment errors
block: make REQ_OP_ZONE_OPEN a write operation
block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL
nvme-pci: use blk_map_iter for p2p metadata
nvmet-auth: update sc_c in host response
Pull s390 fixes from Heiko Carstens:
- Use correct locking in zPCI event code to avoid deadlock
- Get rid of irqs_registered flag in zpci_dev structure and restore IRQ
unconditionally for zPCI devices. This fixes sit uations where the
flag was not correctly updated
- Fix potential memory leak kernel page table dumper code
- Disable (revert) ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP for s390 again.
The optimized hugetlb vmemmap code modifies kernel page tables in a
way which does not work on s390 and leads to reproducible kernel
crashes due to stale TLB entries. This needs to be addressed with
some larger changes. For now simply disable the feature
- Update defconfigs
* tag 's390-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
s390/mm: Fix memory leak in add_marker() when kvrealloc() fails
s390/pci: Restore IRQ unconditionally for the zPCI device
s390: Update defconfigs
s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdump
The arm64 JIT supports BPF_ST with BPF_PROBE_MEM32 (arena) by using the
tmp2 register to hold the dst + arena_vm_base value and using tmp2 as the
new dst register. But this is broken because in case is_lsi_offset()
returns false the tmp2 will be clobbered by emit_a64_mov_i(1, tmp2, off,
ctx); and hence the emitted store instruction will be of the form:
strb w10, [x11, x11]
Fix this by using the third temporary register to hold the dst +
arena_vm_base.
Fixes: 339af577ec ("bpf: Add arm64 JIT support for PROBE_MEM32 pseudo instructions.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251030121715.55214-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The build fails with llvm 21/22:
$ make LLVM=1 -j
...
LD vmlinux.o
GEN .vmlinux.objs
...
BTF .tmp_vmlinux1.btf.o
...
AS .tmp_vmlinux2.kallsyms.o
LD vmlinux.unstripped
BTFIDS vmlinux.unstripped
WARN: resolve_btfids: unresolved symbol migrate_enable
WARN: resolve_btfids: unresolved symbol migrate_disable
make[2]: *** [vmlinux.unstripped] Error 255
make[2]: *** Deleting file 'vmlinux.unstripped'
make[1]: *** [Makefile:1242: vmlinux] Error 2
make: *** [Makefile:248: __sub-make] Error 2
Two functions with identical names but different addresses are
considered ambiguous and removed by "pahole" from vmlinux BTF.
Later resolve_btfids warns since it cannot find them.
Commit 378b770819 ("sched: Make migrate_{en,dis}able() inline") made
them inlineable in most places, but in vmlinux built with llvm 21 and 22
there are four symbols for migrate_{enable,disable}:
three static functions and one global function.
Fix the issue by marking migrate_{enable,disable} as always inline.
The alternative is to mark them as notrace/nokprobe which is more
drastic. Only bpf programs are prevented from attaching to these
functions. The rest of the tracing shouldn't be affected.
[note: Peter ok-ed the patch, Alexei rewrote commit log]
Fixes: 378b770819 ("sched: Make migrate_{en,dis}able() inline")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Menglong Dong <menglong.dong@linux.dev>
Link: https://lore.kernel.org/r/20251029183646.3811774-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull smb client fixes from Steve French:
- fix potential UAF in statfs
- DFS fix for expired referrals
- fix minor modinfo typo
- small improvement to reconnect for smbdirect
* tag '6.18-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: call smbd_destroy() in the same splace as kernel_sock_shutdown()/sock_release()
smb: client: handle lack of IPC in dfs_cache_refresh()
smb: client: fix potential cfid UAF in smb2_query_info_compound
cifs: fix typo in enable_gcm_256 module parameter
This driver assumes that bio vectors are memory aligned to the logical
block size, so set the queue limit to reflect that.
Unless we set up the limit based on the logical block size, we will go
out of page bounds in copy_to_nullb / copy_from_nullb.
Apparently this wasn't noticed so far because none of the tests generate
such buffers, but since commit 851c4c96db ("xfs: implement
XFS_IOC_DIOINFO in terms of vfs_getattr") xfstests generates unaligned
I/O, which now lead to memory corruption when using null_blk devices
with 4k block size.
Fixes: bf8d08532b ("iomap: add support for dma aligned direct-io")
Fixes: b1a000d3b8 ("block: relax direct io memory alignment")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became slightly bigger than usual due
to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas
- A few HD-audio quirks, and USB-audio regression fixes for Presonus"
* tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable mic on Vaio RPL
ASoC: dt-bindings: pm4125-sdw: correct number of soundwire ports
ASoC: renesas: rz-ssi: Use proper dma_buffer_pos after resume
ASoC: soc_sdw_utils: remove cs42l43 component_name
ASoC: fsl_sai: Fix sync error in consumer mode
ASoC: Fix build for sdw_utils
ALSA: hda/realtek: Fix mute led for HP Victus 15-fa1xxx (MB 8C2D)
ASoC: rt721: fix prepare clock stop failed
ALSA: usb-audio: don't log messages meant for 1810c when initializing 1824c
ASoC: mediatek: Fix double pm_runtime_disable in remove functions
ASoC: fsl_micfil: correct the endian format for DSD
ASoC: fsl_sai: fix bit order for DSD format
ASoC: Intel: avs: Use snd_codec format when initializing probe
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
ASoC: Intel: avs: Unprepare a stream when XRUN occurs
ASoC: sdw_utils: add name_prefix for rt1321 part id
ASoC: qdsp6: q6asm: do not sleep while atomic
ASoC: Intel: soc-acpi-intel-ptl-match: Remove cs42l43 match from sdw link3
ASOC: max98090/91: fix for filter configuration: AHPF removed DMIC2_HPF added
ASoC: amd: acp: Add ACP7.0 match entries for cs35l56 and cs42l43
...
Pull crypto fixes from Herbert Xu:
- Fix double free in aspeed
- Fix req->nbytes clobbering in s390/phmac
* tag 'v6.18-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: aspeed - fix double free caused by devm
crypto: s390/phmac - Do not modify the req->nbytes value
Pull SCSI fixes from James Bottomley:
"ufs driver plus two core fixes.
One core fix makes the unit attention counters atomic (just in case
multiple commands detect them) and the other is fixing a merge window
regression caused by changes in the block tree"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Fix the unit attention counter implementation
scsi: ufs: core: Declare tx_lanes witout initialization
scsi: ufs: core: Initialize value of an attribute returned by uic cmd
scsi: ufs: core: Fix error handler host_sem issue
scsi: core: Fix a regression triggered by scsi_host_busy()
Besides blocks being invalidated, there is another case when the original
mapping could have changed between querying the rmap for GC and calling
xfs_zoned_map_extent. Document it there as it took us quite some time
to figure out what is going on while developing the multiple-GC
protection fix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When we are picking a zone for gc it might already be in the pipeline
which can lead to us moving the same data twice resulting in in write
amplification and a very unfortunate case where we keep on garbage
collecting the zone we just filled with migrated data stopping all
forward progress.
Fix this by introducing a count of on-going GC operations on a zone, and
skip any zone with ongoing GC when picking a new victim.
Fixes: 080d01c41 ("xfs: implement zoned garbage collection")
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Co-developed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Pull kselftest fixes from Shuah Khan:
"Fix build warning in cachestat found during clang build and add
tmpshmcstat to .gitignore"
* tag 'linux_kselftest-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: cachestat: Fix warning on declaration under label
selftests/cachestat: add tmpshmcstat file to .gitignore
Pull kunit fixes from Shuah Khan:
"Fix log overwrite in param_tests and fixes incorrect cast of priv
pointer in test_dev_action().
Update email address for Rae Moar in MAINTAINERS KUnit entry"
* tag 'linux_kselftest-kunit-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
MAINTAINERS: Update KUnit email address for Rae Moar
kunit: prevent log overwrite in param_tests
kunit: test_dev_action: Correctly cast 'priv' pointer to long*
Pull ACPI fixes from Rafael Wysocki:
"These fix three ACPI driver issues and add version checks to two ACPI
table parsers:
- Call input_free_device() on failing input device registration as
necessary (and mentioned in the input subsystem documentation) in
the ACPI button driver (Kaushlendra Kumar)
- Fix use-after-free in acpi_video_switch_brightness() by canceling a
delayed work during tear-down (Yuhao Jiang)
- Use platform device for devres-related actions in the ACPI fan
driver to allow device-managed resources to be cleaned up properly
(Armin Wolf)
- Add version checks to the MRRM and SPCR table parsers (Tony Luck
and Punit Agrawal)"
* tag 'acpi-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: SPCR: Check for table version when using precise baudrate
ACPI: MRRM: Check revision of MRRM table
ACPI: fan: Use platform device for devres-related actions
ACPI: fan: Use ACPI handle when retrieving _FST
ACPI: video: Fix use-after-free in acpi_video_switch_brightness()
ACPI: button: Call input_free_device() on failing input device registration
Pull power management fixes from Rafael Wysocki:
"These fix three regressions, two recent ones and one introduced during
the 6.17 development cycle:
- Add an exit latency check to the menu cpuidle governor in the case
when it considers using a real idle state instead of a polling one
to address a performance regression (Rafael Wysocki)
- Revert an attempted cleanup of a system suspend code path that
introduced a regression elsewhere (Samuel Wu)
- Allow pm_restrict_gfp_mask() to be called multiple times in a row
and adjust pm_restore_gfp_mask() accordingly to avoid having to
play nasty games with these calls during hibernation (Rafael
Wysocki)"
* tag 'pm-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Allow pm_restrict_gfp_mask() stacking
cpuidle: governors: menu: Select polling state in some more cases
Revert "PM: sleep: Make pm_wakeup_clear() call more clear"
Pull fbdev fixes from Helge Deller:
- atyfb: Avoid hard lock up when PLL not initialized (Daniel Palmer)
- pvr2fb: Fix build error when CONFIG_PVR2_DMA enabled (Florian Fuchs)
- bitblit: Fix out-of-bounds read in bit_putcs* (Junjie Cao)
- valkyriefb: Fix reference count leak (Miaoqian Lin)
- fbcon: Fix slab-use-after-free in fb_mode_is_equal (Quanmin Yan)
- fb.h: Fix typo in "vertical" (Piyush Choudhary)
* tag 'fbdev-for-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: atyfb: Check if pll_ops->init_pll failed
fbcon: Set fb_display[i]->mode to NULL when the mode is released
fbdev: bitblit: bound-check glyph index in bit_putcs*
fbdev: pvr2fb: Fix leftover reference to ONCHIP_NR_DMA_CHANNELS
fbdev: valkyriefb: Fix reference count leak in valkyriefb_init
video: fb: Fix typo in comment in fb.h
