Patch series "kdump: use generic functions to simplify crashkernel
reservation in arch", v3.
In the current arm64, crashkernel=,high support has been finished after
several rounds of posting and careful reviewing. The code in arm64 which
parses crashkernel kernel parameters firstly, then reserve memory can be a
good example for other ARCH to refer to.
Whereas in x86_64, the code mixing crashkernel parameter parsing and
memory reserving is twisted, and looks messy. Refactoring the code to
make it more readable maintainable is necessary.
Here, firstly abstract the crashkernel parameter parsing code into
parse_crashkernel() to make it be able to parse crashkernel=,high|low.
Then abstract the crashkernel memory reserving code into a generic
function reserve_crashkernel_generic(). Finally, in ARCH which
crashkernel=,high support is needed, a simple arch_reserve_crashkernel()
can be added to call above two functions. This can remove the duplicated
implmentation code in each ARCH, like arm64, x86_64 and riscv.
crashkernel=512M,high
crashkernel=512M,high crashkernel=256M,low
crashkernel=512M,high crashkernel=0M,low
crashkernel=0M,high crashkernel=256M,low
crashkernel=512M
crashkernel=512M@0x4f000000
crashkernel=1G-4G:256M,4G-64G:320M,64G-:576M
crashkernel=0M
This patch (of 9):
In all call sites of __parse_crashkernel(), the parameter 'name' is
hardcoded as "crashkernel=". So remove the unnecessary parameter 'name',
add local varibale 'name' inside __parse_crashkernel() instead.
Link: https://lkml.kernel.org/r/20230914033142.676708-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20230914033142.676708-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
do/while_each_thread should be avoided when possible.
Plus I _think_ this change allows to avoid lock_task_sighand() but I am
not sure, I forgot everything about taskstats. In any case, this code
does not look right in that the same thread can be accounted twice:
taskstats_exit() can account the exiting thread in signal->stats and drop
->siglock but this thread is still on the thread-group list, so
lock_task_sighand() can't help.
Link: https://lkml.kernel.org/r/20230909214951.GA24274@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
rcu_report_dead() has to be called locally by the CPU that is going to
exit the RCU state machine. Passing a cpu argument here is error-prone
and leaves the possibility for a racy remote call.
Use local access instead.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
rcu_report_dead() is the last RCU word from the CPU down through the
hotplug path. It is called in the idle loop right before the CPU shuts
down for good. Because it removes the CPU from the grace period state
machine and reports an ultimate quiescent state if necessary, no further
use of RCU is allowed. Therefore it is expected that IRQs are disabled
upon calling this function and are not to be re-enabled again until the
CPU shuts down.
Remove the IRQs disablement from that function and verify instead that
it is actually called with IRQs disabled as it is expected at that
special point in the idle path.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Since the actual slab freeing is deferred when calling kvfree_rcu(), so
is the kmemleak_free() callback informing kmemleak of the object
deletion. From the perspective of the kvfree_rcu() caller, the object is
freed and it may remove any references to it. Since kmemleak does not
scan RCU internal data storing the pointer, it will report such objects
as leaks during the grace period.
Tell kmemleak to ignore such objects on the kvfree_call_rcu() path. Note
that the tiny RCU implementation does not have such issue since the
objects can be tracked from the rcu_ctrlblk structure.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://lore.kernel.org/all/F903A825-F05F-4B77-A2B5-7356282FBA2C@apple.com/
Cc: <stable@vger.kernel.org>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2023-10-02
We've added 11 non-merge commits during the last 12 day(s) which contain
a total of 12 files changed, 176 insertions(+), 41 deletions(-).
The main changes are:
1) Fix BPF verifier to reset backtrack_state masks on global function
exit as otherwise subsequent precision tracking would reuse them,
from Andrii Nakryiko.
2) Several sockmap fixes for available bytes accounting,
from John Fastabend.
3) Reject sk_msg egress redirects to non-TCP sockets given this
is only supported for TCP sockets today, from Jakub Sitnicki.
4) Fix a syzkaller splat in bpf_mprog when hitting maximum program
limits with BPF_F_BEFORE directive, from Daniel Borkmann
and Nikolay Aleksandrov.
5) Fix BPF memory allocator to use kmalloc_size_roundup() to adjust
size_index for selecting a bpf_mem_cache, from Hou Tao.
6) Fix arch_prepare_bpf_trampoline return code for s390 JIT,
from Song Liu.
7) Fix bpf_trampoline_get when CONFIG_BPF_JIT is turned off,
from Leon Hwang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Use kmalloc_size_roundup() to adjust size_index
selftest/bpf: Add various selftests for program limits
bpf, mprog: Fix maximum program check on mprog attachment
bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets
bpf, sockmap: Add tests for MSG_F_PEEK
bpf, sockmap: Do not inc copied_seq when PEEK flag set
bpf: tcp_read_skb needs to pop skb regardless of seq
bpf: unconditionally reset backtrack_state masks on global func exit
bpf: Fix tr dereferencing
selftests/bpf: Check bpf_cubic_acked() is called via struct_ops
s390/bpf: Let arch_prepare_bpf_trampoline return program size
====================
Link: https://lore.kernel.org/r/20231002113417.2309-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are several scenarios that have come up where having a user_event
persist even if the process that registered it exits. The main one is
having a daemon create events on bootup that shouldn't get deleted if
the daemon has to exit or reload. Another is within OpenTelemetry
exporters, they wish to potentially check if a user_event exists on the
system to determine if exporting the data out should occur. The
user_event in this case must exist even in the absence of the owning
process running (such as the above daemon case).
Expose the previously internal flag USER_EVENT_REG_PERSIST to user
processes. Upon register or delete of events with this flag, ensure the
user is perfmon_capable to prevent random user processes with access to
tracefs from creating events that persist after exit.
Link: https://lkml.kernel.org/r/20230912180704.1284-2-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ring buffer of global_trace is set to the minimum size in
order to save memory on boot up and then it will be expand when
some trace feature enabled.
However currently operations under an instance can also cause
global_trace ring buffer being expanded, and the expanded memory
would be wasted if global_trace then not being used.
See following case, we enable 'sched_switch' event in instance 'A', then
ring buffer of global_trace is unexpectedly expanded to be 1410KB, also
the '(expanded: 1408)' from 'buffer_size_kb' of instance is confusing.
# cd /sys/kernel/tracing
# mkdir instances/A
# cat buffer_size_kb
7 (expanded: 1408)
# cat instances/A/buffer_size_kb
1410 (expanded: 1408)
# echo sched:sched_switch > instances/A/set_event
# cat buffer_size_kb
1410
# cat instances/A/buffer_size_kb
1410
To fix it, we can:
- Make 'ring_buffer_expanded' as a member of 'struct trace_array';
- Make 'ring_buffer_expanded' of instance is defaultly true,
global_trace is defaultly false;
- In order not to expose 'global_trace' outside of file
'kernel/trace/trace.c', introduce trace_set_ring_buffer_expanded()
to set 'ring_buffer_expanded' as 'true';
- Pass the expected trace_array to tracing_update_buffers().
Link: https://lore.kernel.org/linux-trace-kernel/20230906091837.3998020-1-zhengyejian1@huawei.com
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
commit 'be65de6b03aa ("fs: Remove dcookies support")' removed the
syscall definition for lookup_dcookie. However, syscall tables still
point to the old sys_lookup_dcookie() definition. Update syscall tables
of all architectures to directly point to sys_ni_syscall() instead.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org> # for perf
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The expectation is that placing a task at avg_vruntime() makes it
eligible. Turns out there is a corner case where this is not the case.
Specifically, avg_vruntime() relies on the fact that integer division
is a flooring function (eg. it discards the remainder). By this
property the value returned is slightly left of the true average.
However! when the average is a negative (relative to min_vruntime) the
effect is flipped and it becomes a ceil, with the result that the
returned value is just right of the average and thus not eligible.
Fixes: af4cf40470 ("sched/fair: Add cfs_rq::avg_vruntime")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The validation of the value written to sched_rt_period_us was broken
because:
- the sysclt_sched_rt_period is declared as unsigned int
- parsed by proc_do_intvec()
- the range is asserted after the value parsed by proc_do_intvec()
Because of this negative values written to the file were written into a
unsigned integer that were later on interpreted as large positive
integers which did passed the check:
if (sysclt_sched_rt_period <= 0)
return EINVAL;
This commit fixes the parsing by setting explicit range for both
perid_us and runtime_us into the sched_rt_sysctls table and processes
the values with proc_dointvec_minmax() instead.
Alternatively if we wanted to use full range of unsigned int for the
period value we would have to split the proc_handler and use
proc_douintvec() for it however even the
Documentation/scheduller/sched-rt-group.rst describes the range as 1 to
INT_MAX.
As far as I can tell the only problem this causes is that the sysctl
file allows writing negative values which when read back may confuse
userspace.
There is also a LTP test being submitted for these sysctl files at:
http://patchwork.ozlabs.org/project/ltp/patch/20230901144433.2526-1-chrubis@suse.cz/
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231002115553.3007-2-chrubis@suse.cz
Pull misc fixes from Andrew Morton:
"Fourteen hotfixes, eleven of which are cc:stable. The remainder
pertain to issues which were introduced after 6.5"
* tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Crash: add lock to serialize crash hotplug handling
selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error
mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified
mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
mm, memcg: reconsider kmem.limit_in_bytes deprecation
mm: zswap: fix potential memory corruption on duplicate store
arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries
mm: hugetlb: add huge page size param to set_huge_pte_at()
maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
maple_tree: add mas_is_active() to detect in-tree walks
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
mm: abstract moving to the next PFN
mm: report success more often from filemap_map_folio_range()
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
Pull scheduler fix from Ingo Molnar:
"Fix a RT tasks related lockup/live-lock during CPU offlining"
* tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Fix live lock between select_fallback_rq() and RT push
Pull tracing fixes from Steven Rostedt:
- Make sure 32-bit applications using user events have aligned access
when running on a 64-bit kernel.
- Add cond_resched in the loop that handles converting enums in
print_fmt string is trace events.
- Fix premature wake ups of polling processes in the tracing ring
buffer. When a task polls waiting for a percentage of the ring buffer
to be filled, the writer still will wake it up at every event. Add
the polling's percentage to the "shortest_full" list to tell the
writer when to wake it up.
- For eventfs dir lookups on dynamic events, an event system's only
event could be removed, leaving its dentry with no children. This is
totally legitimate. But in eventfs_release() it must not access the
children array, as it is only allocated when the dentry has children.
* tag 'trace-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Test for dentries array allocated in eventfs_release()
tracing/user_events: Align set_bit() address for all archs
tracing: relax trace_event_eval_update() execution with cond_resched()
ring-buffer: Update "shortest_full" in polling
All architectures should use a long aligned address passed to set_bit().
User processes can pass either a 32-bit or 64-bit sized value to be
updated when tracing is enabled when on a 64-bit kernel. Both cases are
ensured to be naturally aligned, however, that is not enough. The
address must be long aligned without affecting checks on the value
within the user process which require different adjustments for the bit
for little and big endian CPUs.
Add a compat flag to user_event_enabler that indicates when a 32-bit
value is being used on a 64-bit kernel. Long align addresses and correct
the bit to be used by set_bit() to account for this alignment. Ensure
compat flags are copied during forks and used during deletion clears.
Link: https://lore.kernel.org/linux-trace-kernel/20230925230829.341-2-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/20230914131102.179100-1-cleger@rivosinc.com/
Cc: stable@vger.kernel.org
Fixes: 7235759084 ("tracing/user_events: Use remote writes for event enablement")
Reported-by: Clément Léger <cleger@rivosinc.com>
Suggested-by: Clément Léger <cleger@rivosinc.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When kernel is compiled without preemption, the eval_map_work_func()
(which calls trace_event_eval_update()) will not be preempted up to its
complete execution. This can actually cause a problem since if another
CPU call stop_machine(), the call will have to wait for the
eval_map_work_func() function to finish executing in the workqueue
before being able to be scheduled. This problem was observe on a SMP
system at boot time, when the CPU calling the initcalls executed
clocksource_done_booting() which in the end calls stop_machine(). We
observed a 1 second delay because one CPU was executing
eval_map_work_func() and was not preempted by the stop_machine() task.
Adding a call to cond_resched() in trace_event_eval_update() allows
other tasks to be executed and thus continue working asynchronously
like before without blocking any pending task at boot time.
Link: https://lore.kernel.org/linux-trace-kernel/20230929191637.416931-1-cleger@rivosinc.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
It was discovered that the ring buffer polling was incorrectly stating
that read would not block, but that's because polling did not take into
account that reads will block if the "buffer-percent" was set. Instead,
the ring buffer polling would say reads would not block if there was any
data in the ring buffer. This was incorrect behavior from a user space
point of view. This was fixed by commit 42fb0a1e84 by having the polling
code check if the ring buffer had more data than what the user specified
"buffer percent" had.
The problem now is that the polling code did not register itself to the
writer that it wanted to wait for a specific "full" value of the ring
buffer. The result was that the writer would wake the polling waiter
whenever there was a new event. The polling waiter would then wake up, see
that there's not enough data in the ring buffer to notify user space and
then go back to sleep. The next event would wake it up again.
Before the polling fix was added, the code would wake up around 100 times
for a hackbench 30 benchmark. After the "fix", due to the constant waking
of the writer, it would wake up over 11,0000 times! It would never leave
the kernel, so the user space behavior was still "correct", but this
definitely is not the desired effect.
To fix this, have the polling code add what it's waiting for to the
"shortest_full" variable, to tell the writer not to wake it up if the
buffer is not as full as it expects to be.
Note, after this fix, it appears that the waiter is now woken up around 2x
the times it was before (~200). This is a tremendous improvement from the
11,000 times, but I will need to spend some time to see why polling is
more aggressive in its wakeups than the read blocking code.
Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 42fb0a1e84 ("tracing/ring-buffer: Have polling block on watermark")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Tested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull dma-mapping fixes from Christoph Hellwig:
- fix the narea calculation in swiotlb initialization (Ross Lagerwall)
- fix the check whether a device has used swiotlb (Petr Tesarik)
* tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix the check whether a device has used software IO TLB
swiotlb: use the calculated number of areas
Commit d52b59315b ("bpf: Adjust size_index according to the value of
KMALLOC_MIN_SIZE") uses KMALLOC_MIN_SIZE to adjust size_index, but as
reported by Nathan, the adjustment is not enough, because
__kmalloc_minalign() also decides the minimal alignment of slab object
as shown in new_kmalloc_cache() and its value may be greater than
KMALLOC_MIN_SIZE (e.g., 64 bytes vs 8 bytes under a riscv QEMU VM).
Instead of invoking __kmalloc_minalign() in bpf subsystem to find the
maximal alignment, just using kmalloc_size_roundup() directly to get the
corresponding slab object size for each allocation size. If these two
sizes are unmatched, adjust size_index to select a bpf_mem_cache with
unit_size equal to the object_size of the underlying slab cache for the
allocation size.
Fixes: 822fb26bdb ("bpf: Add a hint to allocated objects.")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/bpf/20230914181407.GA1000274@dev-arch.thelio-3990X/
Signed-off-by: Hou Tao <houtao1@huawei.com>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230928101558.2594068-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Eric reported that handling corresponding crash hotplug event can be
failed easily when many memory hotplug event are notified in a short
period. They failed because failing to take __kexec_lock.
=======
[ 78.714569] Fallback order for Node 0: 0
[ 78.714575] Built 1 zonelists, mobility grouping on. Total pages: 1817886
[ 78.717133] Policy zone: Normal
[ 78.724423] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate
[ 78.727207] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate
[ 80.056643] PEFILE: Unsigned PE binary
=======
The memory hotplug events are notified very quickly and very many, while
the handling of crash hotplug is much slower relatively. So the atomic
variable __kexec_lock and kexec_trylock() can't guarantee the
serialization of crash hotplug handling.
Here, add a new mutex lock __crash_hotplug_lock to serialize crash hotplug
handling specifically. This doesn't impact the usage of __kexec_lock.
Link: https://lkml.kernel.org/r/20230926120905.392903-1-bhe@redhat.com
Fixes: 2472627561 ("crash: add generic infrastructure for crash hotplug support")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Inspired by recent enhancements to comments in kernel/time/tick-sched.c,
go through the entire file and fix/unify its comments:
- Fix over a dozen typos, spelling mistakes & cases of bad grammar.
- Re-phrase sentences that I needed to read three times to understand.
[ I used the following arbitrary rule-of-thumb:
- if I had to read a comment twice, it was usually my fault,
- if I had to read it a third time, it was the comment's fault. ]
- Comma updates:
- Add commas where needed
- Remove commas where not needed
- In cases where a comma is optional, choose one variant and try to
standardize it over similar sentences in the file.
- Standardize on standalone 'NOHZ' spelling in free-flowing comments:
s/nohz/NOHZ
s/no idle tick/NOHZ
Still keep 'dynticks' as a popular synonym.
- Standardize on referring to variable names within free-flowing
comments with the "'var'" nomenclature, and function names as
"function_name()".
- Standardize on '64-bit' and '32-bit':
s/32bit/32-bit
s/64bit/64-bit
- Standardize on 'IRQ work':
s/irq work/IRQ work
- A few other tidyups I probably missed to list.
No change in functionality intended - other than one small change to
a syslog output string.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/ZRVCNeMcSQcXS36N@gmail.com
atomic_t variables are currently used to implement reference counters
with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows and
underflows. This is important since overflows and underflows can lead
to use-after-free situation and be exploitable.
The variable group_info.usage is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
**Important note for maintainers:
Some functions from refcount_t API defined in refcount.h have different
memory ordering guarantees than their atomic counterparts. Please check
Documentation/core-api/refcount-vs-atomic.rst for more information.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in some
rare cases it might matter. Please double check that you don't have
some undocumented memory guarantees for this variable usage.
For the group_info.usage it might make a difference in following places:
- put_group_info(): decrement in refcount_dec_and_test() only
provides RELEASE ordering and ACQUIRE ordering on success vs. fully
ordered atomic counterpart
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Link: https://lore.kernel.org/r/20230818041456.gonna.009-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Rename unqueue_multiple() as futex_unqueue_multiple(), and make both
that and futex_wait_multiple_setup() available for external users. This
is in preparation for wiring up vectored waits in io_uring.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To make it more generically useful, augment it with allowing the caller
to pass in the wake handler and wake data. Convert the futex_waitv()
syscall, passing in the default handlers.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With handling multiple futex_q for waitv, we cannot easily go from the
futex_q to data related to that request or queue. Add a wake_data
argument that belongs to the wake handler assigned.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the unqueue and lock_ptr clear into a helper that futex_wake_mark()
calls. Add it to the public functions as well, in preparation for using
it outside the core futex code.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for having another waker that isn't futex_wake_mark(),
add a wake handler in futex_q. No extra data is associated with the
handler outside of struct futex_q itself. futex_wake_mark() is defined as
the standard wakeup helper, now set through futex_q_init like other
defaults.
Normal sync futex waiting relies on wake_q holding tasks that should
be woken up. This is what futex_wake_mark() does, it'll unqueue the
futex and add the associated task to the wake queue. For async usage of
futex waiting, rather than having tasks sleeping on the futex, we'll
need to deal with a futex wake differently. For the planned io_uring
case, that means posting a completion event for the task in question.
Having a definable wake handler can help support that use case.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need this for validating the futex2 flags outside of the normal
futex syscalls.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
find_energy_efficient_cpu() bails out early if effective util of the
task is 0 as the delta at this point will be zero and there's nothing
for EAS to do. When uclamp is being used, this could lead to wrong
decisions when uclamp_max is set to 0. In this case the task is capped
to performance point 0, but it is actually running and consuming energy
and we can benefit from EAS energy calculations.
Rework the condition so that it bails out when both util and uclamp_min
are 0.
We can do that without needing to use uclamp_task_util(); remove it.
Fixes: d81304bc61 ("sched/uclamp: Cater for uclamp in find_energy_efficient_cpu()'s early exit condition")
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230916232955.2099394-3-qyousef@layalina.io
