When smb_direct_disconnect_rdma_connection() turns SMBDIRECT_SOCKET_CREATED
into SMBDIRECT_SOCKET_ERROR, we'll have the situation that
smb_direct_disconnect_rdma_work() will set SMBDIRECT_SOCKET_DISCONNECTING
and call rdma_disconnect(), which likely fails as we never reached
the RDMA_CM_EVENT_ESTABLISHED. it means that
wait_event(sc->status_wait, sc->status == SMBDIRECT_SOCKET_DISCONNECTED)
in free_transport() will hang forever in SMBDIRECT_SOCKET_DISCONNECTING
never reaching SMBDIRECT_SOCKET_DISCONNECTED.
So we directly go from SMBDIRECT_SOCKET_CREATED to
SMBDIRECT_SOCKET_DISCONNECTED.
Fixes: b3fd52a0d8 ("smb: server: let smb_direct_disconnect_rdma_connection() set SMBDIRECT_SOCKET_ERROR...")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When the per-IP connection limit is exceeded in ksmbd_kthread_fn(),
the code sets ret = -EAGAIN and continues the accept loop without
closing the just-accepted socket. That leaks one socket per rejected
attempt from a single IP and enables a trivial remote DoS.
Release client_sk before continuing.
This bug was found with ZeroPath.
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb_direct_prepare_negotiation() posts a recv and then, if
smb_direct_accept_client() fails, calls put_recvmsg() on the same
buffer. That unmaps and recycles a buffer that is still posted on
the QP., which can lead to device DMA into unmapped or reused memory.
Track whether the recv was posted and only return it if it was never
posted. If accept fails after a post, leave it for teardown to drain
and complete safely.
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull i2c fix from Wolfram Sang:
"Two reverts merged into one commit to handle a regression caused by a
wrong cleanup because the underlying implications were unclear"
* tag 'i2c-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: muxes: pca954x: Fix broken reset-gpio usage
Pull Kbuild fixes from Nathan Chancellor:
- Strip trailing padding bytes from modules.builtin.modinfo to fix
error during modules_install with certain versions of kmod
- Drop unused static inline function warning in .c files with clang
from W=1 to W=2
- Ensure kernel-doc.py invocations use the PYTHON3 make variable to
ensure user's choice of Python interpreter is always respected
* tag 'kbuild-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Let kernel-doc.py use PYTHON3 override
compiler_types: Move unused static inline functions warning to W=2
kbuild: Strip trailing padding bytes from modules.builtin.modinfo
It is possible to force a specific version of python to be used when
building the kernel by passing PYTHON3= on the make command line.
However kernel-doc.py is currently called with python3 hard-coded and
thus ignores this setting.
Use $(PYTHON3) to run $(KERNELDOC) so that the desired version of
python is used.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://patch.msgid.link/20251107192933.2bfe9e57@endymion
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Pull drm fix from Dave Airlie:
"Brown paper bag, the dma mask fix which I applied and actually looked
through for bad things, actually broke newer GPUs, there might be some
latent part in the boot path that is assuming 32-bit still, but we
will figure that out elsewhere.
nouveau:
- revert DMA mask change"
* tag 'drm-fixes-2025-11-09' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/nouveau: set DMA mask before creating the flush page"
Pull x86 fixes from Ingo Molnar:
- Fix AMD PCI root device caching regression that triggers
on certain firmware variants
- Fix the zen5_rdseed_microcode[] array to be NULL-terminated
- Add more AMD models to microcode signature checking
* tag 'x86-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Add more known models to entry sign checking
x86/CPU/AMD: Add missing terminator for zen5_rdseed_microcode
x86/amd_node: Fix AMD root device caching
Pull scheduler fix from Ingo Molnar:
"Fix a group-throttling bug in the fair scheduler"
* tag 'sched-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Prevent cfs_rq from being unthrottled with zero runtime_remaining
Pull perf event fix from Ingo Molnar:
"Fix a system hang caused by cpu-clock events deadlock"
* tag 'perf-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix system hang caused by cpu-clock usage
Pull locking fix from Ingo Molnar:
"Fix (well, cut in half) a futex performance regression on PowerPC"
* tag 'locking-urgent-2025-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Optimize per-cpu reference counting
Pull io_uring fix from Jens Axboe:
"Single fix in there, fixing an overflow in calculating the needed
segments for converting into a bvec array"
* tag 'io_uring-6.18-20251107' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix regbuf vector size truncation
Pull xfs fixes from Carlos Maiolino:
"This contain fixes for the RT and zoned allocator, and a few fixes for
atomic writes"
* tag 'xfs-fixes-6.18-rc5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: free xfs_busy_extents structure when no RT extents are queued
xfs: fix zone selection in xfs_select_open_zone_mru
xfs: fix a rtgroup leak when xfs_init_zone fails
xfs: fix various problems in xfs_atomic_write_cow_iomap_begin
xfs: fix delalloc write failures in software-provided atomic writes
This reverts commit ebe7556050.
Tested the latest kernel on my GB203 and this seems to break it somehow.
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: GSP-FMC boot failed (mbox: 0x0000000b)
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: init failed, -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau: drm:00000000:00000080: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: drm: Device allocation failed: -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: probe with driver nouveau failed with error -5
Not sure why, I went over the patch and thought it should have worked, but there must be some
32-bit problem maybe in the FMC boot path.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull drm fixes from Dave Airlie:
"Back from travel, thanks to Simona for handling things. regular fixes,
seems about the right size, but spread out a bit.
amdgpu has the usual range of fixes, xe has a few fixes, and nouveau
has a couple of fixes, one for blackwell modifiers on 8/16 bit
surfaces.
Otherwise a few small fixes for mediatek, sched, imagination and
pixpaper.
sched:
- Fix deadlock
amdgpu:
- Reset fixes
- Misc fixes
- Panel scaling fixes
- HDMI fix
- S0ix fixes
- Hibernation fix
- Secure display fix
- Suspend fix
- MST fix
amdkfd:
- Process cleanup fix
xe:
- Fix missing synchronization on unbind
- Fix device shutdown when doing FLR
- Fix user fence signaling order
i915:
- Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD
- Fix conversion between clock ticks and nanoseconds
mediatek:
- Disable AFBC support on Mediatek DRM driver
- Add pm_runtime support for GCE power control
imagination:
- kconfig: Fix dependencies
nouveau:
- Set DMA mask earlier
- Advertize correct modifiers for GB20x
pixpaper:
- kconfig: Fix dependencies"
* tag 'drm-fixes-2025-11-08' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe: Enforce correct user fence signaling order using
drm/xe: Do clean shutdown also when using flr
drm/xe: Move declarations under conditional branch
drm/xe/guc: Synchronize Dead CT worker with unbind
drm/amd/display: Enable mst when it's detected but yet to be initialized
drm/amdgpu: Fix wait after reset sequence in S3
drm/amd: Fix suspend failure with secure display TA
drm/amdgpu: fix gpu page fault after hibernation on PF passthrough
drm/tiny: pixpaper: add explicit dependency on MMU
drm/nouveau: Advertise correct modifiers on GB20x
drm: define NVIDIA DRM format modifiers for GB20x
drm/nouveau: set DMA mask before creating the flush page
drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb
drm/amd/display: Fix NULL deref in debugfs odm_combine_segments
drm/amdkfd: Don't clear PT after process killed
drm/amdgpu/smu: Handle S0ix for vangogh
drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
drm/amd/display: Fix black screen with HDMI outputs
drm/amd/display: Don't stretch non-native images by default in eDP
drm/amd/pm: fix missing device_attr cleanup in amdgpu_pm_sysfs_init()
...
Pull parisc fix from Helge Deller:
- fix crash triggered by unaligned access in parisc unwinder
* tag 'parisc-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid crash due to unaligned access in unwinder
Pull iommufd fixes from Jason Gunthorpe:
- Syzkaller found a case where maths overflows can cause divide by 0
- Typo in a compiler bug warning fix in the selftests broke the
selftests
- type1 compatability had a mismatch when unmapping an already unmapped
range, it should succeed
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Make vfio_compat's unmap succeed if the range is already empty
iommufd/selftest: Fix ioctl return value in _test_cmd_trigger_vevents()
iommufd: Don't overflow during division for dirty tracking
Per Nathan, clang catches unused "static inline" functions in C files
since commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Linus said:
> So I entirely ignore W=1 issues, because I think so many of the extra
> warnings are bogus.
>
> But if this one in particular is causing more problems than most -
> some teams do seem to use W=1 as part of their test builds - it's fine
> to send me a patch that just moves bad warnings to W=2.
>
> And if anybody uses W=2 for their test builds, that's THEIR problem..
Here is the change to bump the warning from W=1 to W=2.
Fixes: 6863f5643d ("kbuild: allow Clang to find unused static inline functions for W=1 build")
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251106105000.2103276-1-andriy.shevchenko@linux.intel.com
[nathan: Adjust comment as well]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
SMB2_change_notify called smb2_validate_iov() but ignored the return
code, then kmemdup()ed using server provided OutputBufferOffset/Length.
Check the return of smb2_validate_iov() and bail out on error.
Discovered with help from the ZeroPath security tooling.
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: stable@vger.kernel.org
Fixes: e3e9463414 ("smb3: improve SMB3 change notification support")
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull gpio fixes from Bartosz Golaszewski:
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config()
callback in the driver
- correct schema $id path in ti,twl4030 DT bindings
* tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tb10x: Drop unused tb10x_set_bits() function
gpio: aggregator: restore the set_config operation
gpiolib: fix invalid pointer access in debugfs
gpio: swnode: don't use the swnode's name as the key for GPIO lookup
dt-bindings: gpio: ti,twl4030: Correct the schema $id path
Pull tracing fixes from Steven Rostedt:
- Check for reader catching up in ring_buffer_map_get_reader()
If the reader catches up to the writer in the memory mapped ring
buffer then calling rb_get_reader_page() will return NULL as there's
no pages left. But this isn't checked for before calling
rb_get_reader_page() and the return of NULL causes a warning.
If it is detected that the reader caught up to the writer, then
simply exit the routine
- Fix memory leak in histogram create_field_var()
The couple of the error paths in create_field_var() did not properly
clean up what was allocated. Make sure everything is freed properly
on error
- Fix help message of tools latency_collector
The help message incorrectly stated that "-t" was the same as
"--threads" whereas "--threads" is actually represented by "-e"
* tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/tools: Fix incorrcet short option in usage text for --threads
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
Pull slab fix from Vlastimil Babka:
- Fix for potential infinite loop in kmalloc_nolock() when debugging
is enabled for the cache (Vlastimil Babka)
* tag 'slab-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: prevent infinite loop in kmalloc_nolock() with debugging
Pull io_uring fixes from Jens Axboe:
- Remove the sync refill API that was added in this release, in
anticipation of doing it in a better way for the next release
- Fix type extension for calculating size off nr_pages, like we do
in other spots
* tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix types for region size calulation
io_uring/zcrx: remove sync refill uapi
Pull SCSI fixes from James Bottomley:
"All fixes in the UFS driver.
The big contributor to the diffstats is the Intel controller S0ix/S3
fix which has to special case the suspend/resume patch for intel
controllers in ufshcd-pci.c"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix invalid probe error return value
scsi: ufs: ufs-pci: Set UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE for Intel ADL
scsi: ufs: core: Add a quirk to suppress link_startup_again
scsi: ufs: ufs-pci: Fix S0ix/S3 for Intel controllers
scsi: ufs: core: Revert "Make HID attributes visible"
scsi: ufs: core: Reduce link startup failure logging
scsi: ufs: core: Fix a race condition related to the "hid" attribute group
scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3)
Pull smb server fixes from Steve French:
- More safely detect RDMA capable devices correctly
* tag 'v6.18-rc4-smb-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: detect RDMA capable netdevs include IPoIB
ksmbd: detect RDMA capable lower devices when bridge and vlan netdev is used
The help message incorrectly listed '-t' as the short option for
--threads, but the actual getopt_long configuration uses '-e'.
This mismatch can confuse users and lead to incorrect command-line
usage. This patch updates the usage string to correctly show:
"-e, --threads NRTHR"
to match the implementation.
Note: checkpatch.pl reports a false-positive spelling warning on
'Run', which is intentional.
Link: https://patch.msgid.link/20251106031040.1869-1-zhangchujun@cmss.chinamobile.com
Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Prevent application hangs caused by out-of-order fence signaling when
user fences are attached. Use drm_syncobj (via dma-fence-chain) to
guarantee that each user fence signals in order, regardless of the
signaling order of the attached fences. Ensure user fence writebacks to
user space occur in the correct sequence.
v7:
- Skip drm_syncbj create of error (CI)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251031234050.3043507-2-matthew.brost@intel.com
(cherry picked from commit adda4e855ab6409a3edaa585293f1f2069ab7299)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The function create_field_var() allocates memory for 'val' through
create_hist_field() inside parse_atom(), and for 'var' through
create_var(), which in turn allocates var->type and var->var.name
internally. Simply calling kfree() to release these structures will
result in memory leaks.
Use destroy_hist_field() to properly free 'val', and explicitly release
the memory of var->type and var->var.name before freeing 'var' itself.
Link: https://patch.msgid.link/20251106120132.3639920-1-zilin@seu.edu.cn
Fixes: 02205a6752 ("tracing: Add support for 'field variables'")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull probe fixes from Masami Hiramatsu:
- tprobe-events: Fix to register tracepoint correctly
tprobe-events missed to set tracepoint data structure before
registering callback when enabling it. This sets it correctly.
- tprobe-events: Fix to put tracepoint_user when disable the event
tprobe-events missed to unregister tracepoint callback when the event
is disabled. This ensures to unregister it.
* tag 'probes-fixes-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: tprobe-events: Fix to put tracepoint_user when disable the tprobe
tracing: tprobe-events: Fix to register tracepoint correctly
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Add James Clark as a perf tools reviewer
- Handle '1' type symbols in /proc/kallsyms, related to anonymous
Rust closures in the DRM panic QR encoder, caught by 'perf test'
- Sync kernel header copies: MSRs, uprobe syscall,
DRM_IOCTL_GEM_CHANGE_HANDLE, KVM exit reasons, etc
* tag 'perf-tools-fixes-for-v6.18-1-2025-11-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf symbols: Handle '1' symbols in /proc/kallsyms
tools headers asm: Sync fls headers header with the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources to handle new exit reasons
tools headers svm: Sync svm headers with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
MAINTAINERS: Add James Clark as a perf tools reviewer
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h to pick DRM_IOCTL_GEM_CHANGE_HANDLE
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers x86: Sync table due to introducion of uprobe syscall
tools headers: Sync uapi/linux/fcntl.h with the kernel sources
tools headers: Sync uapi/linux/prctl.h with the kernel source
tools headers uapi: Update fs.h with the kernel sources
tools arch x86: Sync msr-index.h to pick AMD64_{PERF_CNTR_GLOBAL_STATUS_SET,SAVIC_CONTROL}, IA32_L3_QOS_{ABMC,EXT}_CFG
Pull RISC-V fixes from Paul Walmsley:
- A fix to disable KASAN checks while walking a non-current task's
stackframe (following x86)
- A fix for a kvrealloc()-related memory leak in
module_frob_arch_sections()
- Two replacements of strcpy() with strscpy()
- A change to use the RISC-V .insn assembler directive when possible to
assemble instructions from hex opcodes
- Some low-impact fixes in the ptdump code and kprobes test code
* tag 'riscv-for-linus-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
cpuidle: riscv-sbi: Replace deprecated strcpy in sbi_cpuidle_init_cpu
riscv: KGDB: Replace deprecated strcpy in kgdb_arch_handle_qxfer_pkt
riscv: asm: use .insn for making custom instructions
riscv: tests: Make RISCV_KPROBES_KUNIT tristate
riscv: tests: Rename kprobes_test_riscv to kprobes_riscv
riscv: Fix memory leak in module_frob_arch_sections()
riscv: ptdump: use seq_puts() in pt_dump_seq_puts() macro
riscv: stacktrace: Disable KASAN checks for non-current tasks
Pull ACPI fixes from Rafael Wysocki:
"These fix a coding mistake in the ACPI Smart Battery Subsystem (SBS)
driver and two documentation issues:
- Fix computation of the battery->present value in acpi_battery_read()
to work when battery->id is not zero (Dan Carpenter)
- Fix comment typo in the ACPI CPPC library (Chu Guangqing)
- Fix I2C device references in two ASL examples in the firmware guide
that were broken by a previous update (Jonas Gorski)"
* tag 'acpi-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: SBS: Fix present test in acpi_battery_read()
ACPI: CPPC: Fix typo in a comment
Documentation: ACPI: i2c-muxes: fix I2C device references
Since __tracepoint_user_init() calls tracepoint_user_register() without
initializing tuser->tpoint with given tracpoint, it does not register
tracepoint stub function as callback correctly, and tprobe does not work.
Initializing tuser->tpoint correctly before tracepoint_user_register()
so that it sets up tracepoint callback.
I confirmed below example works fine again.
echo "t sched_switch preempt prev_pid=prev->pid next_pid=next->pid" > /sys/kernel/tracing/dynamic_events
echo 1 > /sys/kernel/tracing/events/tracepoints/sched_switch/enable
cat /sys/kernel/tracing/trace_pipe
Link: https://lore.kernel.org/all/176244793514.155515.6466348656998627773.stgit@devnote2/
Fixes: 2867495dea ("tracing: tprobe-events: Register tracepoint when enable tprobe event")
Reported-by: Beau Belgrave <beaub@linux.microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Beau Belgrave <beaub@linux.microsoft.com>
Merge two documentation fixes for 6.18-rc5, a commet typo fix in the
ACPI CPPC library (Chu Guangqing) and fixes for two ASL examples in the
firmware guide (Jonas Gorski).
* acpi-cppc:
ACPI: CPPC: Fix typo in a comment
* acpi-docs:
Documentation: ACPI: i2c-muxes: fix I2C device references
