In blamed commit, I missed that get_dist_table() was allocating
memory using GFP_KERNEL, and acquiring qdisc lock to perform
the swap of newly allocated table with current one.
In this patch, get_dist_table() is allocating memory and
copy user data before we acquire the qdisc lock.
Then we perform swap operations while being protected by the lock.
Note that after this patch netem_change() no longer can do partial changes.
If an error is returned, qdisc conf is left unchanged.
Fixes: 2174a08db8 ("sch_netem: acquire qdisc lock in netem_change()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230622181503.2327695-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
igc: TX timestamping fixes
This is the fixes part of the series intended to add support for using
the 4 timestamp registers present in i225/i226.
Moving the timestamp handling to be inline with the interrupt handling
has the advantage of improving the TX timestamping retrieval latency,
here are some numbers using ntpperf:
Before:
$ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o -37
| responses | TX timestamp offset (ns)
rate clients | lost invalid basic xleave | min mean max stddev
1000 100 0.00% 0.00% 0.00% 100.00% -56 +9 +52 19
1500 150 0.00% 0.00% 0.00% 100.00% -40 +30 +75 22
2250 225 0.00% 0.00% 0.00% 100.00% -11 +29 +72 15
3375 337 0.00% 0.00% 0.00% 100.00% -18 +40 +88 22
5062 506 0.00% 0.00% 0.00% 100.00% -19 +23 +77 15
7593 759 0.00% 0.00% 0.00% 100.00% +7 +47 +5168 43
11389 1138 0.00% 0.00% 0.00% 100.00% -11 +41 +5240 39
17083 1708 0.00% 0.00% 0.00% 100.00% +19 +60 +5288 50
25624 2562 0.00% 0.00% 0.00% 100.00% +1 +56 +5368 58
38436 3843 0.00% 0.00% 0.00% 100.00% -84 +12 +8847 66
57654 5765 0.00% 0.00% 100.00% 0.00%
86481 8648 0.00% 0.00% 100.00% 0.00%
129721 12972 0.00% 0.00% 100.00% 0.00%
194581 16384 0.00% 0.00% 100.00% 0.00%
291871 16384 27.35% 0.00% 72.65% 0.00%
437806 16384 50.05% 0.00% 49.95% 0.00%
After:
$ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o -37
| responses | TX timestamp offset (ns)
rate clients | lost invalid basic xleave | min mean max stddev
1000 100 0.00% 0.00% 0.00% 100.00% -44 +0 +61 19
1500 150 0.00% 0.00% 0.00% 100.00% -6 +39 +81 16
2250 225 0.00% 0.00% 0.00% 100.00% -22 +25 +69 15
3375 337 0.00% 0.00% 0.00% 100.00% -28 +15 +56 14
5062 506 0.00% 0.00% 0.00% 100.00% +7 +78 +143 27
7593 759 0.00% 0.00% 0.00% 100.00% -54 +24 +144 47
11389 1138 0.00% 0.00% 0.00% 100.00% -90 -33 +28 21
17083 1708 0.00% 0.00% 0.00% 100.00% -50 -2 +35 14
25624 2562 0.00% 0.00% 0.00% 100.00% -62 +7 +66 23
38436 3843 0.00% 0.00% 0.00% 100.00% -33 +30 +5395 36
57654 5765 0.00% 0.00% 100.00% 0.00%
86481 8648 0.00% 0.00% 100.00% 0.00%
129721 12972 0.00% 0.00% 100.00% 0.00%
194581 16384 19.50% 0.00% 80.50% 0.00%
291871 16384 35.81% 0.00% 64.19% 0.00%
437806 16384 55.40% 0.00% 44.60% 0.00%
During this series, and to show that as is always the case, things are
never easy as they should be, a hardware issue was found, and it took
some time to find the workaround(s). The bug and workaround are better
explained in patch 4/4.
Note: the workaround has a simpler alternative, but it would involve
adding support for the other timestamp registers, and only using the
TXSTMP{H/L}_0 as a way to clear the interrupt. But I feel bad about
throwing this kind of resources away. Didn't test this extensively but
it should work.
Also, as Marc Kleine-Budde suggested, after some consensus is reached
on this series, most parts of it will be proposed for igb.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Work around HW bug causing missing timestamps
igc: Retrieve TX timestamp during interrupt handling
igc: Check if hardware TX timestamping is enabled earlier
igc: Fix race condition in PTP tx code
====================
Link: https://lore.kernel.org/r/20230622165244.2202786-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2023-06-22
Oliver Hartkopp's patch fixes the return value in the error path of
isotp_sendmsg() in the CAN ISOTP protocol.
* tag 'linux-can-fixes-for-6.4-20230622' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: isotp: isotp_sendmsg(): fix return error fix on TX path
====================
Link: https://lore.kernel.org/r/20230622090122.574506-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix an issue where the kernel would stall during netboot, showing the
"sched: RT throttling activated" message. This stall was triggered by
the behavior of the mii_interrupt bit (Bit 7 - DP83TD510E_STS_MII_INT)
in the DP83TD510E's PHY_STS Register (Address = 0x10). The DP83TD510E
datasheet (2020) states that the bit clears on write, however, in
practice, the bit clears on read.
This discrepancy had significant implications on the driver's interrupt
handling. The PHY_STS Register was used by handle_interrupt() to check
for pending interrupts and by read_status() to get the current link
status. The call to read_status() was unintentionally clearing the
mii_interrupt status bit without deasserting the IRQ pin, causing
handle_interrupt() to miss other pending interrupts. This issue was most
apparent during netboot.
The fix refrains from using the PHY_STS Register for interrupt handling.
Instead, we now solely rely on the INTERRUPT_REG_1 Register (Address =
0x12) and INTERRUPT_REG_2 Register (Address = 0x13) for this purpose.
These registers directly influence the IRQ pin state and are latched
high until read.
Note: The INTERRUPT_REG_2 Register (Address = 0x13) exists and can also
be used for interrupt handling, specifically for "Aneg page received
interrupt" and "Polarity change interrupt". However, these features are
currently not supported by this driver.
Fixes: 165cd04fe2 ("net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY")
Cc: <stable@vger.kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230621043848.3806124-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a possible deadlock in netlink_set_err() [1]
A similar issue was fixed in commit 1d482e666b ("netlink: disable IRQs
for netlink_lock_table()") in netlink_lock_table()
This patch adds IRQ safety to netlink_set_err() and __netlink_diag_dump()
which were not covered by cited commit.
[1]
WARNING: possible irq lock inversion dependency detected
6.4.0-rc6-syzkaller-00240-g4e9f0ec38852 #0 Not tainted
syz-executor.2/23011 just changed the state of lock:
ffffffff8e1a7a58 (nl_table_lock){.+.?}-{2:2}, at: netlink_set_err+0x2e/0x3a0 net/netlink/af_netlink.c:1612
but this lock was taken by another, SOFTIRQ-safe lock in the past:
(&local->queue_stop_reason_lock){..-.}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(nl_table_lock);
local_irq_disable();
lock(&local->queue_stop_reason_lock);
lock(nl_table_lock);
<Interrupt>
lock(&local->queue_stop_reason_lock);
*** DEADLOCK ***
Fixes: 1d482e666b ("netlink: disable IRQs for netlink_lock_table()")
Reported-by: syzbot+a7d200a347f912723e5c@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=a7d200a347f912723e5c
Link: https://lore.kernel.org/netdev/000000000000e38d1605fea5747e@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230621154337.1668594-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 49725ffc15 ("net: stmmac: power up/down serdes in
stmmac_open/release") correctly added a call to the serdes_powerdown()
callback to stmmac_release() but did not remove the one from
stmmac_remove() which leads to a doubled call to serdes_powerdown().
This can lead to all kinds of problems: in the case of the qcom ethqos
driver, it caused an unbalanced regulator disable splat.
Fixes: 49725ffc15 ("net: stmmac: power up/down serdes in stmmac_open/release")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230621135537.376649-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update email addresses of Marvell octeon_ep driver maintainers.
Also remove a former maintainer.
As a maintainer below are the responsibilities:
- Pushing the bug fixes and new features to upstream.
- Responsible for reviewing the external changes
submitted for the octeon_ep driver.
- Reply to maintainers questions in a timely manner.
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Devicetree bindings should be picked up by subsystem maintainers,
but respective pattern for Bluetooth drivers was missing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from ipsec, bpf, mptcp and netfilter.
Current release - regressions:
- netfilter: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
- eth: mlx5e:
- fix scheduling of IPsec ASO query while in atomic
- free IRQ rmap and notifier on kernel shutdown
Current release - new code bugs:
- phy: manual remove LEDs to ensure correct ordering
Previous releases - regressions:
- mptcp: fix possible divide by zero in recvmsg()
- dsa: revert "net: phy: dp83867: perform soft reset and retain
established link"
Previous releases - always broken:
- sched: netem: acquire qdisc lock in netem_change()
- bpf:
- fix verifier id tracking of scalars on spill
- fix NULL dereference on exceptions
- accept function names that contain dots
- netfilter: disallow element updates of bound anonymous sets
- mptcp: ensure listener is unhashed before updating the sk status
- xfrm:
- add missed call to delete offloaded policies
- fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets
- selftests: fixes for FIPS mode
- dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling
- eth: sfc: use budget for TX completions
Misc:
- wifi: iwlwifi: add support for SO-F device with PCI id 0x7AF0"
* tag 'net-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
revert "net: align SO_RCVMARK required privileges with SO_MARK"
net: wwan: iosm: Convert single instance struct member to flexible array
sch_netem: acquire qdisc lock in netem_change()
selftests: forwarding: Fix race condition in mirror installation
wifi: mac80211: report all unusable beacon frames
mptcp: ensure listener is unhashed before updating the sk status
mptcp: drop legacy code around RX EOF
mptcp: consolidate fallback and non fallback state machine
mptcp: fix possible list corruption on passive MPJ
mptcp: fix possible divide by zero in recvmsg()
mptcp: handle correctly disconnect() failures
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
bpf/btf: Accept function names that contain dots
Revert "net: phy: dp83867: perform soft reset and retain established link"
net: mdio: fix the wrong parameters
netfilter: nf_tables: Fix for deleting base chains with payload
netfilter: nfnetlink_osf: fix module autoload
netfilter: nf_tables: drop module reference after updating chain
netfilter: nf_tables: disallow timeout for anonymous sets
netfilter: nf_tables: disallow updates of anonymous sets
...
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly save/restore PMUSERNR_EL0 when host userspace is using
PMU counters directly
- Fix GICv2 emulation on GICv3 after the locking rework
- Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
document why
Generic:
- Avoid setting page table entries pointing to a deleted memslot if a
host page table entry is changed concurrently with the deletion"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Avoid illegal stage2 mapping on invalid memory slot
KVM: arm64: Use raw_smp_processor_id() in kvm_pmu_probe_armpmu()
KVM: arm64: Restore GICv2-on-GICv3 functionality
KVM: arm64: PMU: Don't overwrite PMUSERENR with vcpu loaded
KVM: arm64: PMU: Restore the host's PMUSERENR_EL0
Pull powerpc fix from Michael Ellerman:
- Disable IRQs when switching mm in exit_lazy_flush_tlb() called from
exit_mmap()
Thanks to Nicholas Piggin and Sachin Sant.
* tag 'powerpc-6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/radix: Fix exit lazy tlb mm switch with irqs enabled
Pull pci fix from Bjorn Helgaas:
- Transfer Intel LGM GW PCIe maintenance from Rahul Tanwar to Chuanhua
Lei (Zhu YiXin)
* tag 'pci-v6.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Chuanhua Lei as Intel LGM GW PCIe maintainer
Pull x86 platform driver fix from Hans de Goede:
"One small fix for an AMD PMF driver issue which is causing issues for
users of just released AMD laptop models"
* tag 'platform-drivers-x86-v6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Register notify handler only if SPS is enabled
Pull io_uring fixes from Jens Axboe:
"A fix for a race condition with poll removal and linked timeouts, and
then a few followup fixes/tweaks for the msg_control patch from last
week.
Not super important, particularly the sparse fixup, as it was broken
before that recent commit. But let's get it sorted for real for this
release, rather than just have it broken a bit differently"
* tag 'io_uring-6.4-2023-06-21' of git://git.kernel.dk/linux:
io_uring/net: use the correct msghdr union member in io_sendmsg_copy_hdr
io_uring/net: disable partial retries for recvmsg with cmsg
io_uring/net: clear msg_controllen on partial sendmsg retry
io_uring/poll: serialize poll linked timer start with poll removal
Pull cgroup fixes from Tejun Heo:
"It's late but here are two bug fixes. Both fix problems which can be
severe but are very confined in scope. The risk to most use cases
should be minimal.
- Fix for an old bug which triggers if a cgroup subsystem is
remounted to a different hierarchy while someone is reading its
cgroup.procs/tasks file. The risk is pretty low given how seldom
cgroup subsystems are moved across hierarchies.
- We moved cpus_read_lock() outside of cgroup internal locks a while
ago but forgot to update the legacy_freezer leading to lockdep
triggers. Fixed"
* tag 'cgroup-for-6.4-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Do not corrupt task iteration when rebinding subsystem
cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex in freezer_css_{online,offline}()
KVM/arm64 fixes for 6.4, take #4
- Correctly save/restore PMUSERNR_EL0 when host userspace is using
PMU counters directly
- Fix GICv2 emulation on GICv3 after the locking rework
- Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
document why...
We run into guest hang in edk2 firmware when KSM is kept as running on
the host. The edk2 firmware is waiting for status 0x80 from QEMU's pflash
device (TYPE_PFLASH_CFI01) during the operation of sector erasing or
buffered write. The status is returned by reading the memory region of
the pflash device and the read request should have been forwarded to QEMU
and emulated by it. Unfortunately, the read request is covered by an
illegal stage2 mapping when the guest hang issue occurs. The read request
is completed with QEMU bypassed and wrong status is fetched. The edk2
firmware runs into an infinite loop with the wrong status.
The illegal stage2 mapping is populated due to same page sharing by KSM
at (C) even the associated memory slot has been marked as invalid at (B)
when the memory slot is requested to be deleted. It's notable that the
active and inactive memory slots can't be swapped when we're in the middle
of kvm_mmu_notifier_change_pte() because kvm->mn_active_invalidate_count
is elevated, and kvm_swap_active_memslots() will busy loop until it reaches
to zero again. Besides, the swapping from the active to the inactive memory
slots is also avoided by holding &kvm->srcu in __kvm_handle_hva_range(),
corresponding to synchronize_srcu_expedited() in kvm_swap_active_memslots().
CPU-A CPU-B
----- -----
ioctl(kvm_fd, KVM_SET_USER_MEMORY_REGION)
kvm_vm_ioctl_set_memory_region
kvm_set_memory_region
__kvm_set_memory_region
kvm_set_memslot(kvm, old, NULL, KVM_MR_DELETE)
kvm_invalidate_memslot
kvm_copy_memslot
kvm_replace_memslot
kvm_swap_active_memslots (A)
kvm_arch_flush_shadow_memslot (B)
same page sharing by KSM
kvm_mmu_notifier_invalidate_range_start
:
kvm_mmu_notifier_change_pte
kvm_handle_hva_range
__kvm_handle_hva_range
kvm_set_spte_gfn (C)
:
kvm_mmu_notifier_invalidate_range_end
Fix the issue by skipping the invalid memory slot at (C) to avoid the
illegal stage2 mapping so that the read request for the pflash's status
is forwarded to QEMU and emulated by it. In this way, the correct pflash's
status can be returned from QEMU to break the infinite loop in the edk2
firmware.
We tried a git-bisect and the first problematic commit is cd4c718352 ("
KVM: arm64: Convert to the gfn-based MMU notifier callbacks"). With this,
clean_dcache_guest_page() is called after the memory slots are iterated
in kvm_mmu_notifier_change_pte(). clean_dcache_guest_page() is called
before the iteration on the memory slots before this commit. This change
literally enlarges the racy window between kvm_mmu_notifier_change_pte()
and memory slot removal so that we're able to reproduce the issue in a
practical test case. However, the issue exists since commit d5d8184d35
("KVM: ARM: Memory virtualization setup").
Cc: stable@vger.kernel.org # v3.9+
Fixes: d5d8184d35 ("KVM: ARM: Memory virtualization setup")
Reported-by: Shuai Hu <hshuai@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Message-Id: <20230615054259.14911-1-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's an hardware issue that can cause missing timestamps. The bug
is that the interrupt is only cleared if the IGC_TXSTMPH_0 register is
read.
The bug can cause a race condition if a timestamp is captured at the
wrong time, and we will miss that timestamp. To reduce the time window
that the problem is able to happen, in case no timestamp was ready, we
read the "previous" value of the timestamp registers, and we compare
with the "current" one, if it didn't change we can be reasonably sure
that no timestamp was captured. If they are different, we use the new
value as the captured timestamp.
The HW bug is not easy to reproduce, got to reproduce it when smashing
the NIC with timestamping requests from multiple applications (e.g.
multiple ntpperf instances + ptp4l), after 10s of minutes.
This workaround has more impact when multiple timestamp registers are
used, and the IGC_TXSTMPH_0 register always need to be read, so the
interrupt is cleared.
Fixes: 2c344ae245 ("igc: Add support for TX timestamping")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Before requesting a packet transmission to be hardware timestamped,
check if the user has TX timestamping enabled. Fixes an issue that if
a packet was internally forwarded to the NIC, and it had the
SKBTX_HW_TSTAMP flag set, the driver would mark that timestamp as
skipped.
In reality, that timestamp was "not for us", as TX timestamp could
never be enabled in the NIC.
Checking if the TX timestamping is enabled earlier has a secondary
effect that when TX timestamping is disabled, there's no need to check
for timestamp timeouts.
We should only take care to free any pending timestamp when TX
timestamping is disabled, as that skb would never be released
otherwise.
Fixes: 2c344ae245 ("igc: Add support for TX timestamping")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, the igc driver supports timestamping only one tx packet at a
time. During the transmission flow, the skb that requires hardware
timestamping is saved in adapter->ptp_tx_skb. Once hardware has the
timestamp, an interrupt is delivered, and adapter->ptp_tx_work is
scheduled. In igc_ptp_tx_work(), we read the timestamp register, update
adapter->ptp_tx_skb, and notify the network stack.
While the thread executing the transmission flow (the user process
running in kernel mode) and the thread executing ptp_tx_work don't
access adapter->ptp_tx_skb concurrently, there are two other places
where adapter->ptp_tx_skb is accessed: igc_ptp_tx_hang() and
igc_ptp_suspend().
igc_ptp_tx_hang() is executed by the adapter->watchdog_task worker
thread which runs periodically so it is possible we have two threads
accessing ptp_tx_skb at the same time. Consider the following scenario:
right after __IGC_PTP_TX_IN_PROGRESS is set in igc_xmit_frame_ring(),
igc_ptp_tx_hang() is executed. Since adapter->ptp_tx_start hasn't been
written yet, this is considered a timeout and adapter->ptp_tx_skb is
cleaned up.
This patch fixes the issue described above by adding the ptp_tx_lock to
protect access to ptp_tx_skb and ptp_tx_start fields from igc_adapter.
Since igc_xmit_frame_ring() called in atomic context by the networking
stack, ptp_tx_lock is defined as a spinlock, and the irq safe variants
of lock/unlock are used.
With the introduction of the ptp_tx_lock, the __IGC_PTP_TX_IN_PROGRESS
flag doesn't provide much of a use anymore so this patch gets rid of it.
Fixes: 2c344ae245 ("igc: Add support for TX timestamping")
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
This is v3, including a crash fix for patch 01/14.
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix UDP segmentation with IPVS tunneled traffic, from Terin Stock.
2) Fix chain binding transaction logic, add a bound flag to rule
transactions. Remove incorrect logic in nft_data_hold() and
nft_data_release().
3) Add a NFT_TRANS_PREPARE_ERROR deactivate state to deal with releasing
the set/chain as a follow up to 1240eb93f0 ("netfilter: nf_tables:
incorrect error path handling with NFT_MSG_NEWRULE")
4) Drop map element references from preparation phase instead of
set destroy path, otherwise bogus EBUSY with transactions such as:
flush chain ip x y
delete chain ip x w
where chain ip x y contains jump/goto from set elements.
5) Pipapo set type does not regard generation mask from the walk
iteration.
6) Fix reference count underflow in set element reference to
stateful object.
7) Several patches to tighten the nf_tables API:
- disallow set element updates of bound anonymous set
- disallow unbound anonymous set/chain at the end of transaction.
- disallow updates of anonymous set.
- disallow timeout configuration for anonymous sets.
8) Fix module reference leak in chain updates.
9) Fix nfnetlink_osf module autoload.
10) Fix deletion of basechain when NFTA_CHAIN_HOOK is specified as
in iptables-nft.
This Netfilter batch is larger than usual at this stage, I am aware we
are fairly late in the -rc cycle, if you prefer to route them through
net-next, please let me know.
netfilter pull request 23-06-21
* tag 'nf-23-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Fix for deleting base chains with payload
netfilter: nfnetlink_osf: fix module autoload
netfilter: nf_tables: drop module reference after updating chain
netfilter: nf_tables: disallow timeout for anonymous sets
netfilter: nf_tables: disallow updates of anonymous sets
netfilter: nf_tables: reject unbound chain set before commit phase
netfilter: nf_tables: reject unbound anonymous set before commit phase
netfilter: nf_tables: disallow element updates of bound anonymous sets
netfilter: nf_tables: fix underflow in object reference counter
netfilter: nft_set_pipapo: .walk does not deal with generations
netfilter: nf_tables: drop map element references from preparation phase
netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
netfilter: nf_tables: fix chain binding transaction logic
ipvs: align inner_mac_header for encapsulation
====================
Link: https://lore.kernel.org/r/20230621100731.68068-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 1f86123b97 ("net: align SO_RCVMARK required
privileges with SO_MARK") because the reasoning in the commit message
is not really correct:
SO_RCVMARK is used for 'reading' incoming skb mark (via cmsg), as such
it is more equivalent to 'getsockopt(SO_MARK)' which has no priv check
and retrieves the socket mark, rather than 'setsockopt(SO_MARK) which
sets the socket mark and does require privs.
Additionally incoming skb->mark may already be visible if
sysctl_fwmark_reflect and/or sysctl_tcp_fwmark_accept are enabled.
Furthermore, it is easier to block the getsockopt via bpf
(either cgroup setsockopt hook, or via syscall filters)
then to unblock it if it requires CAP_NET_RAW/ADMIN.
On Android the socket mark is (among other things) used to store
the network identifier a socket is bound to. Setting it is privileged,
but retrieving it is not. We'd like unprivileged userspace to be able
to read the network id of incoming packets (where mark is set via
iptables [to be moved to bpf])...
An alternative would be to add another sysctl to control whether
setting SO_RCVMARK is privilged or not.
(or even a MASK of which bits in the mark can be exposed)
But this seems like over-engineering...
Note: This is a non-trivial revert, due to later merged commit e42c7beee7
("bpf: net: Consider has_current_bpf_ctx() when testing capable() in sk_setsockopt()")
which changed both 'ns_capable' into 'sockopt_ns_capable' calls.
Fixes: 1f86123b97 ("net: align SO_RCVMARK required privileges with SO_MARK")
Cc: Larysa Zaremba <larysa.zaremba@intel.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Patrick Rohr <prohr@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230618103130.51628-1-maze@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With commit d674a8f123 ("can: isotp: isotp_sendmsg(): fix return
error on FC timeout on TX path") the missing correct return value in
the case of a protocol error was introduced.
But the way the error value has been read and sent to the user space
does not follow the common scheme to clear the error after reading
which is provided by the sock_error() function. This leads to an error
report at the following write() attempt although everything should be
working.
Fixes: d674a8f123 ("can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path")
Reported-by: Carsten Schmidt <carsten.schmidt-achim@t-online.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230607072708.38809-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.
If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.
Fix this by setting the neighbor's state to permanent in a couple of
tests, so that it is always valid.
Fixes: 35c31d5c32 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d")
Fixes: 239e754af8 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/268816ac729cb6028c7a34d4dda6f4ec7af55333.1687264607.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matthieu Baerts says:
====================
mptcp: fixes for 6.4
Patch 1 correctly handles disconnect() failures that can happen in some
specific cases: now the socket state is set as unconnected as expected.
That fixes an issue introduced in v6.2.
Patch 2 fixes a divide by zero bug in mptcp_recvmsg() with a fix similar
to a recent one from Eric Dumazet for TCP introducing sk_wait_pending
flag. It should address an issue present in MPTCP from almost the
beginning, from v5.9.
Patch 3 fixes a possible list corruption on passive MPJ even if the race
seems very unlikely, better be safe than sorry. The possible issue is
present from v5.17.
Patch 4 consolidates fallback and non fallback state machines to avoid
leaking some MPTCP sockets. The fix is likely needed for versions from
v5.11.
Patch 5 drops code that is no longer used after the introduction of
patch 4/6. This is not really a fix but this patch can probably land in
the -net tree as well not to leave unused code.
Patch 6 ensures listeners are unhashed before updating their sk status
to avoid possible deadlocks when diag info are going to be retrieved
with a lock. Even if it should not be visible with the way we are
currently getting diag info, the issue is present from v5.17.
====================
Link: https://lore.kernel.org/r/20230620-upstream-net-20230620-misc-fixes-for-v6-4-v1-0-f36aa5eae8b9@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP protocol access the listener subflow in a lockless
manner in a couple of places (poll, diag). That works only if
the msk itself leaves the listener status only after that the
subflow itself has been closed/disconnected. Otherwise we risk
deadlock in diag, as reported by Christoph.
Address the issue ensuring that the first subflow (the listener
one) is always disconnected before updating the msk socket status.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/407
Fixes: b29fcfb54c ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thanks to the previous patch -- "mptcp: consolidate fallback and non
fallback state machine" -- we can finally drop the "temporary hack"
used to detect rx eof.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An orphaned msk releases the used resources via the worker,
when the latter first see the msk in CLOSED status.
If the msk status transitions to TCP_CLOSE in the release callback
invoked by the worker's final release_sock(), such instance of the
workqueue will not take any action.
Additionally the MPTCP code prevents scheduling the worker once the
socket reaches the CLOSE status: such msk resources will be leaked.
The only code path that can trigger the above scenario is the
__mptcp_check_send_data_fin() in fallback mode.
Address the issue removing the special handling of fallback socket
in __mptcp_check_send_data_fin(), consolidating the state machine
for fallback and non fallback socket.
Since non-fallback sockets do not send and do not receive data_fin,
the mptcp code can update the msk internal status to match the next
step in the SM every time data fin (ack) should be generated or
received.
As a consequence we can remove a bunch of checks for fallback from
the fastpath.
Fixes: 6e628cd3a8 ("mptcp: use mptcp release_cb for delayed tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At passive MPJ time, if the msk socket lock is held by the user,
the new subflow is appended to the msk->join_list under the msk
data lock.
In mptcp_release_cb()/__mptcp_flush_join_list(), the subflows in
that list are moved from the join_list into the conn_list under the
msk socket lock.
Append and removal could race, possibly corrupting such list.
Address the issue splicing the join list into a temporary one while
still under the msk data lock.
Found by code inspection, the race itself should be almost impossible
to trigger in practice.
Fixes: 3e5014909b ("mptcp: cleanup MPJ subflow list handling")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the mptcp code has assumes that disconnect() can fail only
at mptcp_sendmsg_fastopen() time - to avoid a deadlock scenario - and
don't even bother returning an error code.
Soon mptcp_disconnect() will handle more error conditions: let's track
them explicitly.
As a bonus, explicitly annotate TCP-level disconnect as not failing:
the mptcp code never blocks for event on the subflows.
Fixes: 7d803344fd ("mptcp: fix deadlock in fastopen error path")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2023-06-21
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 7 files changed, 181 insertions(+), 15 deletions(-).
The main changes are:
1) Fix a verifier id tracking issue with scalars upon spill,
from Maxim Mikityanskiy.
2) Fix NULL dereference if an exception is generated while a BPF
subprogram is running, from Krister Johansen.
3) Fix a BTF verification failure when compiling kernel with LLVM_IAS=0,
from Florent Revest.
4) Fix expected_attach_type enforcement for kprobe_multi link,
from Jiri Olsa.
5) Fix a bpf_jit_dump issue for x86_64 to pick the correct JITed image,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
bpf/btf: Accept function names that contain dots
selftests/bpf: add a test for subprogram extables
bpf: ensure main program has an extable
bpf: Fix a bpf_jit_dump issue for x86_64 with sysctl bpf_jit_enable.
selftests/bpf: Add test cases to assert proper ID tracking on spill
bpf: Fix verifier id tracking of scalars on spill
====================
Link: https://lore.kernel.org/r/20230621101116.16122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull timer fix from Thomas Gleixner:
"A single regression fix for a regression fix:
For a long time the tick was aligned to clock MONOTONIC so that the
tick event happened at a multiple of nanoseconds per tick starting
from clock MONOTONIC = 0.
At some point this changed as the refined jiffies clocksource which is
used during boot before the TSC or other clocksources becomes usable,
was adjusted with a boot offset, so that time 0 is closer to the point
where the kernel starts.
This broke the assumption in the tick code that when the tick setup
happens early on ktime_get() will return a multiple of nanoseconds per
tick. As a consequence applications which aligned their periodic
execution so that it does not collide with the tick were not longer
guaranteed that the tick period starts from time 0.
The fix for this regression was to realign the tick when it is
initially set up to a multiple of tick periods. That works as long as
the underlying tick device supports periodic mode, but breaks under
certain conditions when the tick device supports only one shot mode.
Depending on the offset, the alignment delta to clock MONOTONIC can
get in a range where the minimal programming delta of the underlying
clock event device is larger than the calculated delta to the next
tick. This results in a boot hang as the tick code tries to play catch
up, but as the tick never fires jiffies are not advanced so it keeps
trying for ever.
Solve this by moving the tick alignement into the NOHZ / HIGHRES
enablement code because at that point it is guaranteed that the
underlying clocksource is high resolution capable and not longer
depending on the tick.
This is far before user space starts, so at the point where
applications try to align their timers, the old behaviour of the tick
happening at a multiple of nanoseconds per tick starting from clock
MONOTONIC = 0 is restored"
* tag 'timers-urgent-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/common: Align tick period during sched_timer setup
Pull virtio fix from Michael Tsirkin:
"A last minute revert to fix a regression"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
Revert "virtio-blk: support completion batching for the IRQ path"
Pull spi fix from Mark Brown:
"One last fix for SPI, just a simple fix for incorrect handling of
probe deferral for DMA in the Qualcomm GENI driver"
* tag 'spi-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()
Pull regulator fix from Mark Brown:
"One simple fix for v6.4, some incorrectly specified bitfield masks in
the PCA9450 driver"
* tag 'regulator-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pca9450: Fix LDO3OUT and LDO4OUT MASK
Pull regmap fix from Mark Brown:
"One more fix for v6.4
The earlier fix to take account of the register data size when
limiting raw register writes exposed the fact that the Intel AVMM bus
was incorrectly specifying too low a limit on the maximum data
transfer, it is only capable of transmitting one register so had set a
transfer size limit that couldn't fit both the value and the the
register address into a single message"
* tag 'regmap-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: spi-avmm: Fix regmap_bus max_raw_write
Rather than assign the user pointer to msghdr->msg_control, assign it
to msghdr->msg_control_user to make sparse happy. They are in a union
so the end result is the same, but let's avoid new sparse warnings and
squash this one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306210654.mDMcyMuB-lkp@intel.com/
Fixes: cac9e4418f ("io_uring/net: save msghdr->msg_control for retries")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We cannot sanely handle partial retries for recvmsg if we have cmsg
attached. If we don't, then we'd just be overwriting the initial cmsg
header on retries. Alternatively we could increment and handle this
appropriately, but it doesn't seem worth the complication.
Move the MSG_WAITALL check into the non-multishot case while at it,
since MSG_WAITALL is explicitly disabled for multishot anyway.
Link: https://lore.kernel.org/io-uring/0b0d4411-c8fd-4272-770b-e030af6919a0@kernel.dk/
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
