Even if it is not a real issue at the moment since concurrent access to
mcu message queue is protected by mcu mutex, make the code more robust
and move mcu queue free space check inside queue spinlock critical section.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set intr1 to 0 in mt7996_irq_tasklet() in order to avoid possible
uninitialized variable usage if wed is not active for hif2.
Fixes: 83eafc9251 ("wifi: mt76: mt7996: add wed tx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Before sending suspend & wow command to FW, its length should be
4-bytes alignd.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
During chip recovery (e.g. chip reset), there is a possible situation that
kernel worker reset_work is holding the lock and waiting for kernel thread
stat_worker to be parked, while stat_worker is waiting for the release of
the same lock.
It causes a deadlock resulting in the dumping of hung tasks messages and
possible rebooting of the device.
This patch prevents the execution of stat_worker during the chip recovery.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7920e is a mt7921 series chipset with 802.11ax 2x2:2SS support.
The major difference is in firmware side only, at this moment.
This patch would add some mandatory changes for new chip id and
firmware download control.
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fixes issues with scanning and low power output at some rates.
Fixes: f75e4779d2 ("wifi: mt76: mt7996: add txpower setting support")
Signed-off-by: Chad Monroe <chad@monroe.io>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The wcid can be NULL. It should be checked for validity before
dereferencing it to avoid crash.
Fixes: 098428c400 ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This flag is needed for the PSE client reset. Fixes watchdog reset issues.
Fixes: c677dda165 ("wifi: mt76: mt7603: improve watchdog reset reliablity")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use the correct WMM AC queue instead of the MGMT one to fix potential issues
with aggregation sequence number tracking. Drop non-bufferable packets.
Fixes: fca9615f1a ("mt76: mt7603: fix up hardware queue index for PS filtered packets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When pre-calibration data is missing, do not fail the driver probe.
Instead, just print a warning and fall back to regular calibration.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add pre-calibration for mt7986 and mt7916. It has different data size
with mt7915. Group cal needs 54k and 94k for 2G + 5G and 2G + 6G,
respectively. DPD cal needs 300k.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Send an update to the MCU whenever the settings change
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set correct beamformer capabilities for station vif in HE PHY
capabilities IE.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not report measurements if the airtime counter was cleared since the
last update (possibly by firmware)
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mcu command format are different for mt7915 and mt7986.
Fix the mt7915_mcu_wed_wa_tx_stats to support mt7915 and mt7986.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When queueing packets, only the MT76_RESET flag of the primary PHY
is checked. If the primary PHY is scanning or changing channels, this can
lead to packet loss for tx on the second PHY.
Fix this by passing the phy to the .tx_queue_skb op and using it to check
the correct flag.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Commit 3e2f544dd8 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240426093156.2002258-2-leitao@debian.org
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Move qtnfmac driver to leverage the core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240426093156.2002258-1-leitao@debian.org
Tony Nguyen says:
====================
net: intel: start The Great Code Dedup + Page Pool for iavf
Alexander Lobakin says:
Here's a two-shot: introduce {,Intel} Ethernet common library (libeth and
libie) and switch iavf to Page Pool. Details are in the commit messages;
here's a summary:
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules. Before introducing new changes, which would need to be
copied over again, start decoupling the already existing duplicate
functionality into a new module, which will be shared between several
Intel Ethernet drivers. The first name that came to my mind was
"libie" -- "Intel Ethernet common library". Also this sounds like
"lovelie" (-> one word, no "lib I E" pls) and can be expanded as
"lib Internet Explorer" :P
The "generic", pure-software part is placed separately, so that it can be
easily reused in any driver by any vendor without linking to the Intel
pre-200G guts. In a few words, it's something any modern driver does the
same way, but nobody moved it level up (yet).
The series is only the beginning. From now on, adding every new feature
or doing any good driver refactoring will remove much more lines than add
for quite some time. There's a basic roadmap with some deduplications
planned already, not speaking of that touching every line now asks:
"can I share this?". The final destination is very ambitious: have only
one unified driver for at least i40e, ice, iavf, and idpf with a struct
ops for each generation. That's never gonna happen, right? But you still
can at least try.
PP conversion for iavf lands within the same series as these two are tied
closely. libie will support Page Pool model only, so that a driver can't
use much of the lib until it's converted. iavf is only the example, the
rest will eventually be converted soon on a per-driver basis. That is
when it gets really interesting. Stay tech.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
MAINTAINERS: add entry for libeth and libie
iavf: switch to Page Pool
iavf: pack iavf_ring more efficiently
libeth: add Rx buffer management
page_pool: add DMA-sync-for-CPU inline helper
page_pool: constify some read-only function arguments
slab: introduce kvmalloc_array_node() and kvcalloc_node()
iavf: drop page splitting and recycling
iavf: kill "legacy-rx" for good
net: intel: introduce {, Intel} Ethernet common library
====================
Link: https://lore.kernel.org/r/20240424203559.3420468-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fragment lookup should only be performed, when
at least one of the fragment flags are set.
This change was deliberately not included in commit
68aba00483 ("net: sparx5: flower: fix fragment flags handling")
as it's only needed for future proffing the code, since
"mask" is currently only set in conjunction with the
fragment flags.
(The 3rd flag FLOW_DIS_ENCAPSULATION is only used with "key")
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Someone complains the message appears continuously. This occurs
because the device is woken from UPS mode, and the driver re-loads
the firmware.
When the device enters runtime suspend and cable is unplugged, the
device would enter UPS mode. If the runtime resume occurs, and the
device is woken from UPS mode, the driver has to re-load the firmware
and causes the message. If someone wakes the device continuously, the
message would be shown continuously, too. Use dev_dbg to avoid it.
Note that, the function could be called before register_netdev(), so I
don't use netif_info() or netif_dbg().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20240424084532.159649-1-hayeswang@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enhance the quirk for Fibrestore 2.5G copper SFP module. The original
commit e27aca3760 ("net: sfp: add quirk for FS's 2.5G copper SFP")
introducing the quirk says that the PHY is inaccessible, but that is
not true.
The module uses Rollball protocol to talk to the PHY, and needs a 4
second wait before probing it, same as FS 10G module.
The PHY inside the module is Realtek RTL8221B-VB-CG PHY. The realtek
driver recently gained support to set it up via clause 45 accesses.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240423085039.26957-2-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While testing TCP performance with latest trees,
I saw suspect SOCKET_BACKLOG drops.
tcp_add_backlog() computes its limit with :
limit = (u32)READ_ONCE(sk->sk_rcvbuf) +
(u32)(READ_ONCE(sk->sk_sndbuf) >> 1);
limit += 64 * 1024;
This does not take into account that sk->sk_backlog.len
is reset only at the very end of __release_sock().
Both sk->sk_backlog.len and sk->sk_rmem_alloc could reach
sk_rcvbuf in normal conditions.
We should double sk->sk_rcvbuf contribution in the formula
to absorb bubbles in the backlog, which happen more often
for very fast flows.
This change maintains decent protection against abuses.
Fixes: c377411f24 ("net: sk_add_backlog() take rmem_alloc into account")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240423125620.3309458-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.10
The second "new features" pull request for v6.10 with changes both in
stack and in drivers. This time the pull request is rather small and
nothing special standing out except maybe that we have several
kernel-doc fixes. Great to see that we are getting warning free
wireless code (until new warnings are added).
Major changes:
rtl8xxxu:
* enable Management Frame Protection (MFP) support
rtw88:
* disable unsupported interface type of mesh point for all chips, and only
support station mode for SDIO chips.
* tag 'wireless-next-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (63 commits)
wifi: mac80211: handle link ID during management Tx
wifi: mac80211: handle sdata->u.ap.active flag with MLO
wifi: cfg80211: add return docs for regulatory functions
wifi: cfg80211: make some regulatory functions void
wifi: mac80211: add return docs for sta_info_flush()
wifi: mac80211: keep mac80211 consistent on link activation failure
wifi: mac80211: simplify ieee80211_assign_link_chanctx()
wifi: mac80211: reserve chanctx during find
wifi: cfg80211: fix cfg80211 function kernel-doc
wifi: mac80211_hwsim: Use wider regulatory for custom for 6GHz tests
wifi: iwlwifi: mvm: Don't allow EMLSR when the RSSI is low
wifi: iwlwifi: mvm: disable EMLSR when we suspend with wowlan
wifi: iwlwifi: mvm: get periodic statistics in EMLSR
wifi: iwlwifi: mvm: don't recompute EMLSR mode in can_activate_links
wifi: iwlwifi: mvm: implement EMLSR prevention mechanism.
wifi: iwlwifi: mvm: exit EMLSR upon missed beacon
wifi: iwlwifi: mvm: init vif works only once
wifi: iwlwifi: mvm: Add helper functions to update EMLSR status
wifi: iwlwifi: mvm: Implement new link selection algorithm
wifi: iwlwifi: mvm: move EMLSR/links code
...
====================
Link: https://lore.kernel.org/r/20240424100122.217AEC113CE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
