By wiring up sid.h in GFX6, we end up with a few duplicated defines such as
the golden registers. Let's clean this up.
[TAHITI,VERDE, HAINAN]_GB_ADDR_CONFIG_GOLDEN were defined both in sid.h
and under si_enums.h, with different values. Keep the values used under radeon
and move them under gfx_v6_0.c where they are used (as it is done under cik)
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Let's begin the cleanup in sid.h to prevent warnings and errors when wiring
sid.h into dce_v6_0.c.
This is a bigger cleanup.
Many defines found under sid.h have already been properly moved
into the different "_d.h" and "_sh_mask.h", so they should have been
already removed from sid.h and properly linked in where needed.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of only triggering a wedged event for complete GPU resets,
trigger for ring resets. Regardless of the reset, it's useful for
userspace to know that it happened because the kernel will reject
further submissions from that app.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN 2.5 uses the PG callback to enable VCN DPM which is
a global state. As such, we need to make sure all instances
are in the same state.
v2: switch to a ref count (Lijo)
v3: switch to its own idle work handler
v4: fix logic in DPG handling
Fixes: 4ce4fe2720 ("drm/amdgpu/vcn: use per instance callbacks for idle work handler")
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Encode socket id to CPER record id to be unique across devices.
v2: add pointer check for adev->smuio.funcs->get_socket_id
v2: set 0 if adev->smuio.funcs->get_socket_id is NULL
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For gfx_v9_4_3 specifically, before regGB_ADDR_CONFIG is overwritten
in gfx hw_init it is read out to popluate the gb_addr_config_fields
in the sw_init stage, which causes mismatch.
Fix it by using the golden value in sw_init as well.
v2: This is a driver-set golden reg and keep as it is (Lijo)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For default policy, driver will issue an RMA event when the number of
bad pages is greater than 8 physical rows, rather than reaches 8
physical rows, don't rely on threshold configurable parameters in
default mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While the entry get in svm_range_unmap_from_cpu is the last entry, and
the entry is page fault, it also need to be dropped. So for equal case,
it also need to be dropped.
v2:
Only modify the svm_range_restore_pages.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Xiaogang Chen<xiaogang.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran SRIOV VF cannot access the power brake feature regs.
The accesses can be skipped to avoid a dmesg warning.
v2: Remove redundant asic type check
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran SRIOV VF does not have write permissions to GRBM_CTNL.
This access can be skipped to avoid a dmesg warning.
v2: Use GC IP version check instead of asic check
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To reset hung SDMA queues on GFX 9.4+ for the GFX9 family, a soft reset
must be issued through SMU. Since soft resets will reset an entire SDMA
engine, use a common KGD call to do the reset as the KGD will handle
avoiding a reset of in flight GFX and paging queues on that engine.
In addition, create a common call for all reset types to simplify
the handling of module parameter settings that block gpu resets.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for CPERs on VFs.
VFs do not receive PMFW messages directly; as such, they need to
query them from the host. To avoid hitting host event guard,
CPER queries need to be rate limited. CPER queries share the same
RAS telemetry buffer as error count query, so a mutex protecting
the shared buffer was added as well.
For readability, the amdgpu_detect_virtualization was refactored
into multiple individual functions.
Signed-off-by: Tony Yi <Tony.Yi@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update amdgv_sriovmsg.h and mxgpu_nv.h to add new definitions for
CPER support on VFs. PMFW ACA messages are not available on VFs,
and VFs must query CPERs from host.
Signed-off-by: Tony Yi <Tony.Yi@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After a full device reset, shared memory region will clear out and it's
not possible to reliably save the region in case of RAS errors.
Reinitialize the flags if required.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCE6 was missing soft reset, but it was easily identifiable under radeon.
This should be it, pretty much as it is done under DCE8 and DCE10.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For vcn_v_5_0_1, set power state to gating during hw fini. Also there may
be scenario where VCN engine hangs during a job execution, then it's not
safe to assume that set_pg_state works fine during hw_fini to put the state
to gated. After a reset, we can assume that it's in the default state,
therefore reset the driver maintained state. Put the default state as gated
during reset as per this assumption.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates the SDMA scheduler mask handling to include the page queue
if it exists. The scheduler mask is calculated based on the number of SDMA
instances and the presence of the page queue. The mask is updated to reflect
the state of both the SDMA gfx ring and the page queue.
Changes:
- Add handling for the SDMA page queue in `amdgpu_debugfs_sdma_sched_mask_set`.
- Update scheduler mask calculations to include the page queue.
- Modify `amdgpu_debugfs_sdma_sched_mask_get` to return the correct mask value.
This change is necessary to verify multiple queues (SDMA gfx queue + page queue)
and ensure proper scheduling and state management for SDMA instances.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN v5.0.1 also will need register offset normalization. Reuse the logic
from VCN v4.0.3. Also, avoid HDP flush similar to VCN v4.0.3
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update parameter description in the vcn_v5_0_0_is_idle function
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1231: warning: Function parameter or struct member 'ip_block' not described in 'vcn_v5_0_0_is_idle'
drivers/gpu/drm/amd/amdgpu/vcn_v5_0_0.c:1231: warning: Excess function parameter 'handle' description in 'vcn_v5_0_0_is_idle'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous references to a non-existent `adev` parameter have been
removed & corrected to reflect the use of the `vinst` pointer, which
points to the VCN instance structure, in the below files:
- vcn_v1_0.c
- vcn_v2_0.c
- vcn_v3_0.c
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c:624: warning: Function parameter or struct member 'vinst' not described in 'vcn_v1_0_enable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c:624: warning: Excess function parameter 'adev' description in 'vcn_v1_0_enable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:376: warning: Function parameter or struct member 'vinst' not described in 'vcn_v2_0_mc_resume'
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:376: warning: Excess function parameter 'adev' description in 'vcn_v2_0_mc_resume'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:776: warning: Function parameter or struct member 'vinst' not described in 'vcn_v3_0_disable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:776: warning: Excess function parameter 'adev' description in 'vcn_v3_0_disable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:776: warning: Excess function parameter 'inst' description in 'vcn_v3_0_disable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:965: warning: Function parameter or struct member 'vinst' not described in 'vcn_v3_0_enable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:965: warning: Excess function parameter 'adev' description in 'vcn_v3_0_enable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c:965: warning: Excess function parameter 'inst' description in 'vcn_v3_0_enable_clock_gating'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add APIs to initialize XGMI speed, width details and get to max
bandwidth supported. It is assumed that a device only supports same
generation of XGMI links with uniform width.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
