Limiting the number of available VMIDs to enforce isolation causes some
issues with gang submit and applying certain HW workarounds which
require multiple VMIDs to work correctly.
So instead start to track all submissions to the relevant engines in a
per partition data structure and use the dma_fences of the submissions
to enforce isolation similar to what a VMID limit does.
v2: use ~0l for jobs without isolation to distinct it from kernel
submissions which uses NULL for the owner. Add some warning when we
are OOM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the critical submission path memory allocations can't wait for
reclaim since that can potentially wait for submissions to finish.
Finally clean that up and mark most memory allocations in the critical
path with GFP_NOWAIT. The only exception left is the dma_fence_array()
used when no VMID is available, but that will be cleaned up later on.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV, skip the SDMA queue reset and return
error. The engine/queue reset failure will trigger
FLR in the sequence.
v2: do not add queue reset support mask for sriov
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In certain cases, it's desirable to avoid PMFW log transactions to
system memory. Add a mask bit to decide whether to allocate smu pool in
device memory or system memory.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to make the workload profile setup dependent
on the results of cancelling the delayed work thread.
We have all of the necessary checking in place for the
workload profile reference counting, so separate the
two. As it is now, we can theoretically end up with
the call from begin_use happening while the worker
thread is executing which would result in the profile
not getting set for that submission. It should not
affect the reference counting.
v2: bail early if the the profile is already active (Lijo)
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to make the workload profile setup dependent
on the results of cancelling the delayed work thread.
We have all of the necessary checking in place for the
workload profile reference counting, so separate the
two. As it is now, we can theoretically end up with
the call from begin_use happening while the worker
thread is executing which would result in the profile
not getting set for that submission. It should not
affect the reference counting.
v2: bail early if the the profile is already active (Lijo)
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to make sure the workload profile ref counts are
balanced. This isn't currently the case because we can
increment the count on submissions, but the decrement may
be delayed as work comes in. Track when we enable the
workload profile so the references are balanced.
v2: switch to a mutex and active flag
v3: fix mutex init
Fixes: 1443dd3c67 ("drm/amd/pm: fix and simplify workload handling")
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to make sure the workload profile ref counts are
balanced. This isn't currently the case because we can
increment the count on submissions, but the decrement may
be delayed as work comes in. Track when we enable the
workload profile so the references are balanced.
v2: switch to a mutex and active flag
v3: fix mutex init
Fixes: 8fdb3958e3 ("drm/amdgpu/gfx: add ring helpers for setting workload profile")
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Tested-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always use MTYPE_UC if UNCACHED flag is specified.
This makes kernarg region uncached and it restores
usermode cache disable debug flag functionality.
Do not set MTYPE_UC for COHERENT flag, on GFX12 coherence is handled by
shader code.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit eb6cdfb807)
Cc: stable@vger.kernel.org # 6.12.x
In gfx_v12_0_cp_gfx_load_me_microcode_rs64(), gfx_v12_0_pfp_fini() is
incorrectly used to free 'me' field of 'gfx', since gfx_v12_0_pfp_fini()
can only release 'pfp' field of 'gfx'. The release function of 'me' field
should be gfx_v12_0_me_fini().
Fixes: 52cb80c12e ("drm/amdgpu: Add gfx v12_0 ip block support (v6)")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ebdc52607a)
Cc: stable@vger.kernel.org # 6.12.x
XGMI and WAFL share the same versions. Use WAFL version if XGMI version
is not present in discovery.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The scheduler should restart only if the reset operation
succeeds This ensures that new tasks are only submitted
to the queues after a successful reset.
Fixes: 4c02f73016 ("drm/amdgpu: Introduce conditional user queue suspension for SDMA resets")
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse.Zhang <Jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mistake of computation for remain size of CPER ring will cause
unbreakable while cycle when CPER ring overflow.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shorten the gfx idle worker timeout. This is to sync with
DAL when there is no activity on the screen. Original 1
second can not sync with DAL, so DAL can not apply MALL
when the workload type is not bootup default.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCI_CLASS_ACCELERATOR_PROCESSING devices won't ever be
the sysfb, so there is no need to free conflicting
apertures.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move to probe so we can check the PCI device type and
only apply the drm_firmware_drivers_only() check for
PCI DISPLAY classes. Also add a module parameter to
override the nomodeset kernel parameter as a workaround
for platforms that have this hardcoded on their kernel
command lines.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a number of systems and cloud providers out there
that have nomodeset hardcoded in their kernel parameters
to block nouveau for the nvidia driver. This prevents the
amdgpu driver from loading. Unfortunately the end user cannot
easily change this. The preferred way to block modules from
loading is to use modprobe.blacklist=<driver>. That is what
providers should be using to block specific drivers.
Drop the check to allow the driver to load even when nomodeset
is specified on the kernel command line.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always use MTYPE_UC if UNCACHED flag is specified.
This makes kernarg region uncached and it restores
usermode cache disable debug flag functionality.
Do not set MTYPE_UC for COHERENT flag, on GFX12 coherence is handled by
shader code.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In gfx_v12_0_cp_gfx_load_me_microcode_rs64(), gfx_v12_0_pfp_fini() is
incorrectly used to free 'me' field of 'gfx', since gfx_v12_0_pfp_fini()
can only release 'pfp' field of 'gfx'. The release function of 'me' field
should be gfx_v12_0_me_fini().
Fixes: 52cb80c12e ("drm/amdgpu: Add gfx v12_0 ip block support (v6)")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdgpu_sriov_multi_vf_mode to replace amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev).
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dequeue retry timeout controls the interval between checks for unmet
conditions. On MI series, reduce this from 0x40 to 0x1 (~ 1 uS). The
cost of additional bandwidth consumed by CP when polling memory
shouldn't be substantial.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just use the default values. There's not need to
get the value from hardware and it could cause problems
if we do that at runtime and gfxoff is active.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just use the default values. There's not need to
get the value from hardware and it could cause problems
if we do that at runtime and gfxoff is active.
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
XGMI v4.8.0 is not used in any SOCs. Remove the associated functions.
Also, ensure get_xgmi_info callback pointer is not NULL before calling
the function.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PRT BOs may not have any backing store, so bo->tbo.resource will be
NULL. Check for that before dereferencing.
Fixes: 0cce5f285d ("drm/amdkfd: Check correct memory types for is_system variable")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For coherence with DCE8 et DCE10, add or move some values under sid.h
and remove duplicated from si_enums.h.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
