[Why]
VBIOS DMCUB firmware doesn't set the dal_fw bit and we end up hanging
waiting for HW power up done because of it.
[How]
Simplify the path and allow mailbox_rdy to be a functional check when
we detect VBIOS firmware.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence
[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the first if statement, we're checking if 'replay' is NULL. But in
the second if statement, we're not checking if 'replay' is NULL again
before calling replay->funcs->replay_set_power_opt().
if (replay == NULL && force_static)
return false;
...
if (link->replay_settings.replay_feature_enabled &&
replay->funcs->replay_set_power_opt) {
replay->funcs->replay_set_power_opt(replay, *power_opts, panel_inst);
link->replay_settings.replay_power_opt_active = *power_opts;
}
If 'replay' is NULL, this will cause a null pointer dereference.
Fixes the below found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:895 edp_set_replay_allow_active() error: we previously assumed 'replay' could be null (see line 887)
Fixes: c7ddc0a800 ("drm/amd/display: Add Functions to enable Freesync Panel Replay")
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Suggested-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Summary:
* Revert some changes related to pixel encoding and clocks that cause
corruption
* IPS hang fix and FGCG enable by default for DCN35
* PSR-SU/Replay fixes
* Plane clip size change treated as medium update
* Fix for checking link alignment done during link training.
* HDMI compliance test fixes and other improvements
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dcn30_get_gamcor_current() function is responsible for determining
the current gamma correction mode used by the display controller.
However, the 'mode' variable, which stores the gamma correction mode,
was not initialized before its first usage, leading to an uninitialized
symbol error.
Thus initializes the 'mode' variable with a default value of LUT_BYPASS
before the conditional statements in the function, improves code clarity
and stability, ensuring correct behavior of the
dcn30_get_gamcor_current() function in determining the gamma correction
mode.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'.
Fixes: 03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of a cleanup amdgpu_dm_fini() function, which is typically
called when a device is being shut down or a driver is being unloaded
The below error message suggests that there is a potential null pointer
dereference issue with adev->dm.dc.
In the below, line of code where adev->dm.dc is used without a preceding
null check:
for (i = 0; i < adev->dm.dc->caps.max_links; i++) {
To fix this issue, add a null check for adev->dm.dc before this line.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943)
Fixes: 006c26a0f1 ("drm/amd/display: Fix crash on device remove/driver unload")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when 'find_dcfclk_for_voltage()' function is looping over
VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks
array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7).
When the loop variable i reaches 7, the function tries to access
clock_table->DcfClocks[7]. However, since the size of the DcfClocks
array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of
the array, leading to a buffer overflow.
Reported by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'max_chunks_fbc_mode' is only declared and assigned a value under a
specific condition in the following lines:
if (data->fbc_en[i] == 1) {
max_chunks_fbc_mode = 128 - dmif_chunk_buff_margin;
}
If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode
will not be initialized if it's used outside of this for loop.
Ensure that 'max_chunks_fbc_mode' is properly initialized before it's
used. Initialize it to a default value right after its declaration to
ensure that it gets a value assigned under all possible control flow
paths.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wait_time_microsec = max(wait_time_microsec, (uint32_t)
DPIA_CLK_SYNC_DELAY);
Above line is trying to assign the maximum value between
'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec.
However, 'wait_time_microsec' has not been assigned a value before this
line, initialize 'wait_time_microsec' at the point of declaration.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'.
Fixes: 630168a973 ("drm/amd/display: move dp link training logic to link_dp_training")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These ANDs should be ORs or it will lead to a NULL dereference.
Fixes: fb5a3d0370 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'")
Fixes: 886571d217 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'")
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have observed that there are quite a number of PSR-SU panels on the
market that are unable to keep up with what user space throws at them,
resulting in hangs and random black screens. So, make damage clips
support configurable and disable it by default for PSR-SU displays.
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Without acquiring DMCUB hw lock, a race condition is caused with
Panel Replay feature, which will trigger a hang. Indicate that a
lock is necessary to prevent this when replay feature is enabled.
[How]
To allow dmub hw lock on Replay.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dcn30_get_gamcor_current() function is responsible for determining
the current gamma correction mode used by the display controller.
However, the 'mode' variable, which stores the gamma correction mode,
was not initialized before its first usage, leading to an uninitialized
symbol error.
Thus initializes the 'mode' variable with a default value of LUT_BYPASS
before the conditional statements in the function, improves code clarity
and stability, ensuring correct behavior of the
dcn30_get_gamcor_current() function in determining the gamma correction
mode.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'.
Fixes: 03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Read modify write hazards can occur when using a single shared scratch
register between driver and firmware leading to driver accessing DCN
in IPS2 and a system hang.
[How]
Add infrastructure for using REGION6 as a shared firmware state between
driver and firmware. This region is uncachable.
Replace the existing get/set idle calls with reads/writes to the
(volatile) shared firmware state blocks that a separated by at least
a cache line between firmware and driver.
Remove the workarounds that required rewriting/checking read modify
write hazards.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Need to fix some broken logic and sequencing in initial commit
[HOW]
Fix logic handling override deprogramming when exiting SQ128.
Don't exit early from dp_set_hw_lane_settings for DP2/FIXED_VS case.
Move LTTPR 128b/132b check out of requires_hwss and check during
runtime, as LTTPR caps are not populated on initial call.
Add pending_test_pattern to link state to allow HWSS to set FFE overrides
on retimer TX and/or skip setting APU TX FFE depending on requested pattern.
Use updated clock source for SQ128 override sequence.
Skip HW FFE preset programming when performing test pattern overrides.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
sw has most of the fgcg enabled which is the same as HW default.
but driver disabled some due to enable flag not initialized.
comparing HW state, we still need to enable dpp and dio.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When clip size is changed recout and viewport size would require an
update. When the update is clip size only current driver fails to
program the update into hardware.
[how]
Set a new clip_size_change flag when it is detected and set MED update
type and reprogram scaling params in next program pipe.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of a cleanup amdgpu_dm_fini() function, which is typically
called when a device is being shut down or a driver is being unloaded
The below error message suggests that there is a potential null pointer
dereference issue with adev->dm.dc.
In the below, line of code where adev->dm.dc is used without a preceding
null check:
for (i = 0; i < adev->dm.dc->caps.max_links; i++) {
To fix this issue, add a null check for adev->dm.dc before this line.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943)
Fixes: 006c26a0f1 ("drm/amd/display: Fix crash on device remove/driver unload")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, if the abmlevel module parameter is set, it is possible for
user space to override the ABM level at some point after boot. However,
that is undesirable because it means that we aren't respecting the
user's wishes with regard to the level that they want to use. So,
prevent user space from changing the ABM level if the module parameter
is set to a non-auto value.
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL
before the call to dc_enable_dmub_notifications(), check
beforehand to ensure there will not be a possible NULL-ptr-deref
there.
Also, since commit 1e88eb1b2c ("drm/amd/display: Drop
CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in
'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy().
Clean up by combining them all under one 'if'.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 81927e2808 ("drm/amd/display: Support for DMUB AUX")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when 'find_dcfclk_for_voltage()' function is looping over
VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks
array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7).
When the loop variable i reaches 7, the function tries to access
clock_table->DcfClocks[7]. However, since the size of the DcfClocks
array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of
the array, leading to a buffer overflow.
Reported by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'max_chunks_fbc_mode' is only declared and assigned a value under a
specific condition in the following lines:
if (data->fbc_en[i] == 1) {
max_chunks_fbc_mode = 128 - dmif_chunk_buff_margin;
}
If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode
will not be initialized if it's used outside of this for loop.
Ensure that 'max_chunks_fbc_mode' is properly initialized before it's
used. Initialize it to a default value right after its declaration to
ensure that it gets a value assigned under all possible control flow
paths.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wait_time_microsec = max(wait_time_microsec, (uint32_t)
DPIA_CLK_SYNC_DELAY);
Above line is trying to assign the maximum value between
'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec.
However, 'wait_time_microsec' has not been assigned a value before this
line, initialize 'wait_time_microsec' at the point of declaration.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'.
Fixes: 630168a973 ("drm/amd/display: move dp link training logic to link_dp_training")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These ANDs should be ORs or it will lead to a NULL dereference.
Fixes: fb5a3d0370 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'")
Fixes: 886571d217 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'")
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have observed that there are quite a number of PSR-SU panels on the
market that are unable to keep up with what user space throws at them,
resulting in hangs and random black screens. So, make damage clips
support configurable and disable it by default for PSR-SU displays.
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y
and CONFIG_WERROR=y enabled) has a few new instances of
-Wframe-larger-than for the mode support and system configuration
functions:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20v2.c:3393:6: error: stack frame size (2144) exceeds limit (2048) in 'dml20v2_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3393 | void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:3520:6: error: stack frame size (2192) exceeds limit (2048) in 'dml21_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3520 | void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20.c:3286:6: error: stack frame size (2128) exceeds limit (2048) in 'dml20_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3286 | void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
Without the sanitizers enabled, there are no warnings.
This was the catalyst for commit 6740ec97bc ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml2") and that same
change was made to dml in commit 5b750b2253 ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml") but the
frame_warn_flag variable was not applied to all files. Do so now to
clear up the warnings and make all these files consistent.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issue/1990
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
