In the case of a full GPU reset (e.g. because GuC has died or because
GuC's hang detection has been disabled), the driver can't rely on GuC
reporting the guilty context. Instead, the driver needs to scan all
active contexts and find one that is currently executing, as per the
execlist mode behaviour. In GuC mode, this scan is different to
execlist mode as the active request list is handled very differently.
Similarly, the request state dump in debugfs needs to be handled
differently when in GuC submission mode.
Also refactured some of the request scanning code to avoid duplication
across the multiple code paths that are now replicating it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-20-matthew.brost@intel.com
We receive notification of an engine reset from GuC at its
completion. Meaning GuC has potentially cleared any HW state
we may have been interested in capturing. GuC resumes scheduling
on the engine post-reset, as the resets are meant to be transparent,
further muddling our error state.
There is ongoing work to define an API for a GuC debug state dump. The
suggestion for now is to manually disable FW initiated resets in cases
where debug state is needed.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-19-matthew.brost@intel.com
This is only used by GRAPHICS_VER == 6 and GRAPHICS_VER == 7. All other
recent platforms do not depend on this field, so it doesn't make much
sense to keep it generic like that. Instead, just do a mapping from
engine class to HW ID in the single place that is needed.
v2: use macros with the direct register address instead of calculating
from the legacy HW_ID (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723002551.3906535-1-lucas.demarchi@intel.com
The engine hw_id is only used by RING_FAULT_REG(), which is not used
by GRAPHICS_VER >= 8. We did use hw_id on recent platforms to set
the engine's guc_id, but that is not the case anymore since
commit c784e5249e ("drm/i915/guc: Update to use firmware v49.0.1"):
now we only use class and id information to generate guc_id.
We tend to keep adding new defines just to be consistent, but let's try
to remove them and let them defined to 0 for engines that only exist on
gen8+ platforms.
v2: Reword commit message and add information about when we stopped
using hw_id (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720232014.3302645-3-lucas.demarchi@intel.com
Previously, we were storing the ring size in the ring pointer before it
was actually allocated. We would then guard setting the ring size on
checking for CONTEXT_ALLOC_BIT. This is error-prone at best and really
only saves us a few bytes on something that already burns at least 4K.
Instead, this patch adds a new ring_size field and makes everything use
that.
v2 (Daniel Vetter):
- Replace 512 * SZ_4K with SZ_2M
v2 (Jason Ekstrand):
- Rebase on top of page migration code
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-3-jason@jlekstrand.net
Introduce i915_sched_engine object which is lower level data structure
that i915_scheduler / generic code can operate on without touching
execlist specific structures. This allows additional submission backends
to be added without breaking the layering. Currently the execlists
backend uses 1 of these object per each engine (physical or virtual) but
future backends like the GuC will point to less instances utilizing the
reference counting.
This is a bit of detour to integrating the i915 with the DRM scheduler
but this object will still exist when the DRM scheduler lands in the
i915. It will however look a bit different. It will encapsulate the
drm_gpu_scheduler object plus and common variables (to the backends)
related to scheduling. Regardless this is a step in the right direction.
This patch starts the aforementioned transition by moving the priolist
into the i915_sched_engine object.
v3:
(Jason Ekstrand)
Update comment next to intel_engine_cs.virtual
Add kernel doc
(Checkpatch)
Fix double the in commit message
v4:
(Daniele)
Update comment message.
Add comment about subclass field
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618010638.98941-2-matthew.brost@intel.com
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com
Driver Changes:
- Prepare for local/device memory support on DG1 by starting
to use it for kernel internal allocations: context, ring
and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)
- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)
- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
Instead of sharing pages with breadcrumbs, give each timeline a
single page. This allows unrelated timelines not to share locks
any more during command submission.
As an additional benefit, seqno wraparound no longer requires
i915_vma_pin, which means we no longer need to worry about a
potential -EDEADLK at a point where we are ready to submit.
Changes since v1:
- Fix erroneous i915_vma_acquire that should be a i915_vma_release (ickle).
- Extra check for completion in intel_read_hwsp().
Changes since v2:
- Fix inconsistent indent in hwsp_alloc() (kbuild)
- memset entire cacheline to 0.
Changes since v3:
- Do same in intel_timeline_reset_seqno(), and clflush for good measure.
Changes since v4:
- Use refcounting on timeline, instead of relying on i915_active.
- Fix waiting on kernel requests.
Changes since v5:
- Bump amount of slots to maximum (256), for best wraparounds.
- Add hwsp_offset to i915_request to fix potential wraparound hang.
- Ensure timeline wrap test works with the changes.
- Assign hwsp in intel_timeline_read_hwsp() within the rcu lock to
fix a hang.
Changes since v6:
- Rename i915_request_active_offset to i915_request_active_seqno(),
and elaborate the function. (tvrtko)
Changes since v7:
- Move hunk to where it belongs. (jekstrand)
- Replace CACHELINE_BYTES with TIMELINE_SEQNO_BYTES. (jekstrand)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> #v1
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-2-maarten.lankhorst@linux.intel.com
Highlights:
- Alderlake S enabling, via topic branch (Aditya, Anusha, Caz, José, Lucas, Matt, Tejas)
- Refactor display code to shrink intel_display.c etc. (Dave)
- Support more gen 9 and Tigerlake PCH combinations (Lyude, Tejas)
- Add eDP MSO support (Jani)
Display:
- Refactor to support multiple PSR instances (Gwan-gyeong)
- Link training debug logging updates (Sean)
- Updates to eDP fixed mode handling (Jani)
- Disable PSR2 on JSL/EHL (Edmund)
- Support DDR5 and LPDDR5 for bandwidth computation (Clint, José)
- Update VBT DP max link rate table (Shawn)
- Disable the QSES check for HDCP2.2 over MST (Juston)
- PSR updates, refactoring, selective fetch (José, Gwan-gyeong)
- Display init sequence refactoring (Lucas)
- Limit LSPCON to gen 9 and 10 platforms (Ankit)
- Fix DDI lane polarity per VBT info (Uma)
- Fix HDMI vswing programming location in mode set (Ville)
- Various display improvements and refactorings and cleanups (Ville)
- Clean up DDI clock routing and readout (Ville)
- Workaround async flip + VT-d corruption on HSW/BDW (Ville)
- SAGV watermark fixes and cleanups (Ville)
- Silence pipe tracepoint WARNs (Ville)
Other:
- Remove require_force_probe protection from RKL, may need to be revisited (Tejas)
- Detect loss of MMIO access (Matt)
- GVT display improvements
- drm/i915: Disable runtime power management during shutdown (Imre)
- Perf/OA updates (Umesh)
- Remove references to struct drm_device.pdev, via topic branch (Thomas)
- Backmerge (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v99rnk1g.fsf@intel.com
Commit 311a50e76a ("drm/i915: Add support for mandatory cmdparsing")
introduced mandatory command parsing but setup failures were not
translated into wedging the GPU which was probably the intent.
Possible errors come in two categories. Either the sanity check on
internal tables has failed, which should be caught in CI unless an
affected platform would be missed in testing; or memory allocation failure
happened during driver load, which should be extremely unlikely but for
correctness should still be handled.
v2:
* Tidy coding style. (Chris)
[airlied: cherry-picked to avoid rc1 base]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 311a50e76a ("drm/i915: Add support for mandatory cmdparsing")
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210302114213.1102223-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 5a1a659762d35a6dc51047c9127c011303c77b7f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Rather than having special case code for opportunistically calling
process_csb() and performing a direct submit while holding the engine
spinlock for submitting the request, simply call the tasklet directly.
This allows us to retain the direct submission path, including the CS
draining to allow fast/immediate submissions, without requiring any
duplicated code paths, and most importantly greatly simplifying the
control flow by removing reentrancy. This will enable us to close a few
races in the virtual engines in the next few patches.
The trickiest part here is to ensure that paired operations (such as
schedule_in/schedule_out) remain under consistent locking domains,
e.g. when pulled outside of the engine->active.lock
v2: Use bh kicking, see commit 3c53776e29 ("Mark HI and TASKLET
softirq synchronous").
v3: Update engine-reset to be tasklet aware
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201224135544.1713-1-chris@chris-wilson.co.uk
We plan to expand upon the number of available statuses for when we
pretty-print the requests along the timelines, and so need a new set of
flags. We have settled upon:
Unready [U]
- initial status after being submitted, the request is not
ready for execution as it is waiting for external fences
Ready [R]
- all fences the request was waiting on have been signaled,
and the request is now ready for execution and will be
in a backend queue
- a ready request may still need to wait on semaphores
[internal fences]
Ready/virtual [V]
- same as ready, but queued over multiple backends
Executing [E]
- the request has been transferred from the backend queue and
submitted for execution on HW
- a completed request may still be regarded as executing, its
status may not be updated until it is retired and removed
from the lists
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119165616.10834-3-chris@chris-wilson.co.uk
