configs: Add CGROUP_BPF and BPF_SYSCALL

Enabling CONFIG_CGROUP_BPF allows BPF filters to access cgroup-local
storage, which is useful for control network interactions at the
cgroup level. CONFIG_BPF_SYSCALL is required to make use of it.

See: https://github.com/raspberrypi/linux/issues/3294

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,34 @@
+---
+name: Bug report
+about: Create a report to help us fix your issue
+
+---
+
+**Is this the right place for my bug report?**
+This repository contains the Linux kernel used on the Raspberry Pi. If you believe that the issue you are seeing is kernel-related, this is the right place. If not, we have other repositories for the GPU firmware at [github.com/raspberrypi/firmware](https://github.com/raspberrypi/firmware) and Raspberry Pi userland applications at [github.com/raspberrypi/userland](https://github.com/raspberrypi/userland). If you have problems with the Raspbian distribution packages, report them in the [github.com/RPi-Distro/repo](https://github.com/RPi-Distro/repo). If you simply have a question, then [the Raspberry Pi forums](https://www.raspberrypi.org/forums) are the best place to ask it.
+
+**Describe the bug**
+Add a clear and concise description of what you think the bug is.
+
+**To reproduce**
+List the steps required to reproduce the issue.
+
+**Expected behaviour**
+Add a clear and concise description of what you expected to happen.
+
+**Actual behaviour**
+Add a clear and concise description of what actually happened.
+
+**System**
+ Copy and paste the results of the raspinfo command in to this section. Alternatively, copy and paste a pastebin link, or add answers to the following questions:
+
+* Which model of Raspberry Pi? e.g. Pi3B+, PiZeroW
+* Which OS and version (`cat /etc/rpi-issue`)?
+* Which firmware version (`vcgencmd version`)?
+* Which kernel version (`uname -a`)?
+
+**Logs**
+If applicable, add the relevant output from `dmesg` or similar.
+
+**Additional context**
+Add any other relevant context for the problem.

.gitignore

@@ -17,6 +17,7 @@
 *.c.[012]*.*
 *.dt.yaml
 *.dtb
+*.dtbo
 *.dtb.S
 *.dwo
 *.elf

Documentation/admin-guide/hw-vuln/index.rst

@@ -9,5 +9,6 @@ are configurable at compile, boot or run time.
 .. toctree::
    :maxdepth: 1
 
+   spectre
    l1tf
    mds

Documentation/admin-guide/hw-vuln/spectre.rst

@@ -0,0 +1,769 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Spectre Side Channels
+=====================
+
+Spectre is a class of side channel attacks that exploit branch prediction
+and speculative execution on modern CPUs to read memory, possibly
+bypassing access controls. Speculative execution side channel exploits
+do not modify memory but attempt to infer privileged data in the memory.
+
+This document covers Spectre variant 1 and Spectre variant 2.
+
+Affected processors
+-------------------
+
+Speculative execution side channel methods affect a wide range of modern
+high performance processors, since most modern high speed processors
+use branch prediction and speculative execution.
+
+The following CPUs are vulnerable:
+
+    - Intel Core, Atom, Pentium, and Xeon processors
+
+    - AMD Phenom, EPYC, and Zen processors
+
+    - IBM POWER and zSeries processors
+
+    - Higher end ARM processors
+
+    - Apple CPUs
+
+    - Higher end MIPS CPUs
+
+    - Likely most other high performance CPUs. Contact your CPU vendor for details.
+
+Whether a processor is affected or not can be read out from the Spectre
+vulnerability files in sysfs. See :ref:`spectre_sys_info`.
+
+Related CVEs
+------------
+
+The following CVE entries describe Spectre variants:
+
+   =============   =======================  ==========================
+   CVE-2017-5753   Bounds check bypass      Spectre variant 1
+   CVE-2017-5715   Branch target injection  Spectre variant 2
+   CVE-2019-1125   Spectre v1 swapgs        Spectre variant 1 (swapgs)
+   =============   =======================  ==========================
+
+Problem
+-------
+
+CPUs use speculative operations to improve performance. That may leave
+traces of memory accesses or computations in the processor's caches,
+buffers, and branch predictors. Malicious software may be able to
+influence the speculative execution paths, and then use the side effects
+of the speculative execution in the CPUs' caches and buffers to infer
+privileged data touched during the speculative execution.
+
+Spectre variant 1 attacks take advantage of speculative execution of
+conditional branches, while Spectre variant 2 attacks use speculative
+execution of indirect branches to leak privileged memory.
+See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[7] <spec_ref7>`
+:ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
+
+Spectre variant 1 (Bounds Check Bypass)
+---------------------------------------
+
+The bounds check bypass attack :ref:`[2] <spec_ref2>` takes advantage
+of speculative execution that bypasses conditional branch instructions
+used for memory access bounds check (e.g. checking if the index of an
+array results in memory access within a valid range). This results in
+memory accesses to invalid memory (with out-of-bound index) that are
+done speculatively before validation checks resolve. Such speculative
+memory accesses can leave side effects, creating side channels which
+leak information to the attacker.
+
+There are some extensions of Spectre variant 1 attacks for reading data
+over the network, see :ref:`[12] <spec_ref12>`. However such attacks
+are difficult, low bandwidth, fragile, and are considered low risk.
+
+Note that, despite "Bounds Check Bypass" name, Spectre variant 1 is not
+only about user-controlled array bounds checks.  It can affect any
+conditional checks.  The kernel entry code interrupt, exception, and NMI
+handlers all have conditional swapgs checks.  Those may be problematic
+in the context of Spectre v1, as kernel code can speculatively run with
+a user GS.
+
+Spectre variant 2 (Branch Target Injection)
+-------------------------------------------
+
+The branch target injection attack takes advantage of speculative
+execution of indirect branches :ref:`[3] <spec_ref3>`.  The indirect
+branch predictors inside the processor used to guess the target of
+indirect branches can be influenced by an attacker, causing gadget code
+to be speculatively executed, thus exposing sensitive data touched by
+the victim. The side effects left in the CPU's caches during speculative
+execution can be measured to infer data values.
+
+.. _poison_btb:
+
+In Spectre variant 2 attacks, the attacker can steer speculative indirect
+branches in the victim to gadget code by poisoning the branch target
+buffer of a CPU used for predicting indirect branch addresses. Such
+poisoning could be done by indirect branching into existing code,
+with the address offset of the indirect branch under the attacker's
+control. Since the branch prediction on impacted hardware does not
+fully disambiguate branch address and uses the offset for prediction,
+this could cause privileged code's indirect branch to jump to a gadget
+code with the same offset.
+
+The most useful gadgets take an attacker-controlled input parameter (such
+as a register value) so that the memory read can be controlled. Gadgets
+without input parameters might be possible, but the attacker would have
+very little control over what memory can be read, reducing the risk of
+the attack revealing useful data.
+
+One other variant 2 attack vector is for the attacker to poison the
+return stack buffer (RSB) :ref:`[13] <spec_ref13>` to cause speculative
+subroutine return instruction execution to go to a gadget.  An attacker's
+imbalanced subroutine call instructions might "poison" entries in the
+return stack buffer which are later consumed by a victim's subroutine
+return instructions.  This attack can be mitigated by flushing the return
+stack buffer on context switch, or virtual machine (VM) exit.
+
+On systems with simultaneous multi-threading (SMT), attacks are possible
+from the sibling thread, as level 1 cache and branch target buffer
+(BTB) may be shared between hardware threads in a CPU core.  A malicious
+program running on the sibling thread may influence its peer's BTB to
+steer its indirect branch speculations to gadget code, and measure the
+speculative execution's side effects left in level 1 cache to infer the
+victim's data.
+
+Attack scenarios
+----------------
+
+The following list of attack scenarios have been anticipated, but may
+not cover all possible attack vectors.
+
+1. A user process attacking the kernel
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Spectre variant 1
+~~~~~~~~~~~~~~~~~
+
+   The attacker passes a parameter to the kernel via a register or
+   via a known address in memory during a syscall. Such parameter may
+   be used later by the kernel as an index to an array or to derive
+   a pointer for a Spectre variant 1 attack.  The index or pointer
+   is invalid, but bound checks are bypassed in the code branch taken
+   for speculative execution. This could cause privileged memory to be
+   accessed and leaked.
+
+   For kernel code that has been identified where data pointers could
+   potentially be influenced for Spectre attacks, new "nospec" accessor
+   macros are used to prevent speculative loading of data.
+
+Spectre variant 1 (swapgs)
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+   An attacker can train the branch predictor to speculatively skip the
+   swapgs path for an interrupt or exception.  If they initialize
+   the GS register to a user-space value, if the swapgs is speculatively
+   skipped, subsequent GS-related percpu accesses in the speculation
+   window will be done with the attacker-controlled GS value.  This
+   could cause privileged memory to be accessed and leaked.
+
+   For example:
+
+   ::
+
+     if (coming from user space)
+         swapgs
+     mov %gs:<percpu_offset>, %reg
+     mov (%reg), %reg1
+
+   When coming from user space, the CPU can speculatively skip the
+   swapgs, and then do a speculative percpu load using the user GS
+   value.  So the user can speculatively force a read of any kernel
+   value.  If a gadget exists which uses the percpu value as an address
+   in another load/store, then the contents of the kernel value may
+   become visible via an L1 side channel attack.
+
+   A similar attack exists when coming from kernel space.  The CPU can
+   speculatively do the swapgs, causing the user GS to get used for the
+   rest of the speculative window.
+
+Spectre variant 2
+~~~~~~~~~~~~~~~~~
+
+   A spectre variant 2 attacker can :ref:`poison <poison_btb>` the branch
+   target buffer (BTB) before issuing syscall to launch an attack.
+   After entering the kernel, the kernel could use the poisoned branch
+   target buffer on indirect jump and jump to gadget code in speculative
+   execution.
+
+   If an attacker tries to control the memory addresses leaked during
+   speculative execution, he would also need to pass a parameter to the
+   gadget, either through a register or a known address in memory. After
+   the gadget has executed, he can measure the side effect.
+
+   The kernel can protect itself against consuming poisoned branch
+   target buffer entries by using return trampolines (also known as
+   "retpoline") :ref:`[3] <spec_ref3>` :ref:`[9] <spec_ref9>` for all
+   indirect branches. Return trampolines trap speculative execution paths
+   to prevent jumping to gadget code during speculative execution.
+   x86 CPUs with Enhanced Indirect Branch Restricted Speculation
+   (Enhanced IBRS) available in hardware should use the feature to
+   mitigate Spectre variant 2 instead of retpoline. Enhanced IBRS is
+   more efficient than retpoline.
+
+   There may be gadget code in firmware which could be exploited with
+   Spectre variant 2 attack by a rogue user process. To mitigate such
+   attacks on x86, Indirect Branch Restricted Speculation (IBRS) feature
+   is turned on before the kernel invokes any firmware code.
+
+2. A user process attacking another user process
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   A malicious user process can try to attack another user process,
+   either via a context switch on the same hardware thread, or from the
+   sibling hyperthread sharing a physical processor core on simultaneous
+   multi-threading (SMT) system.
+
+   Spectre variant 1 attacks generally require passing parameters
+   between the processes, which needs a data passing relationship, such
+   as remote procedure calls (RPC).  Those parameters are used in gadget
+   code to derive invalid data pointers accessing privileged memory in
+   the attacked process.
+
+   Spectre variant 2 attacks can be launched from a rogue process by
+   :ref:`poisoning <poison_btb>` the branch target buffer.  This can
+   influence the indirect branch targets for a victim process that either
+   runs later on the same hardware thread, or running concurrently on
+   a sibling hardware thread sharing the same physical core.
+
+   A user process can protect itself against Spectre variant 2 attacks
+   by using the prctl() syscall to disable indirect branch speculation
+   for itself.  An administrator can also cordon off an unsafe process
+   from polluting the branch target buffer by disabling the process's
+   indirect branch speculation. This comes with a performance cost
+   from not using indirect branch speculation and clearing the branch
+   target buffer.  When SMT is enabled on x86, for a process that has
+   indirect branch speculation disabled, Single Threaded Indirect Branch
+   Predictors (STIBP) :ref:`[4] <spec_ref4>` are turned on to prevent the
+   sibling thread from controlling branch target buffer.  In addition,
+   the Indirect Branch Prediction Barrier (IBPB) is issued to clear the
+   branch target buffer when context switching to and from such process.
+
+   On x86, the return stack buffer is stuffed on context switch.
+   This prevents the branch target buffer from being used for branch
+   prediction when the return stack buffer underflows while switching to
+   a deeper call stack. Any poisoned entries in the return stack buffer
+   left by the previous process will also be cleared.
+
+   User programs should use address space randomization to make attacks
+   more difficult (Set /proc/sys/kernel/randomize_va_space = 1 or 2).
+
+3. A virtualized guest attacking the host
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The attack mechanism is similar to how user processes attack the
+   kernel.  The kernel is entered via hyper-calls or other virtualization
+   exit paths.
+
+   For Spectre variant 1 attacks, rogue guests can pass parameters
+   (e.g. in registers) via hyper-calls to derive invalid pointers to
+   speculate into privileged memory after entering the kernel.  For places
+   where such kernel code has been identified, nospec accessor macros
+   are used to stop speculative memory access.
+
+   For Spectre variant 2 attacks, rogue guests can :ref:`poison
+   <poison_btb>` the branch target buffer or return stack buffer, causing
+   the kernel to jump to gadget code in the speculative execution paths.
+
+   To mitigate variant 2, the host kernel can use return trampolines
+   for indirect branches to bypass the poisoned branch target buffer,
+   and flushing the return stack buffer on VM exit.  This prevents rogue
+   guests from affecting indirect branching in the host kernel.
+
+   To protect host processes from rogue guests, host processes can have
+   indirect branch speculation disabled via prctl().  The branch target
+   buffer is cleared before context switching to such processes.
+
+4. A virtualized guest attacking other guest
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   A rogue guest may attack another guest to get data accessible by the
+   other guest.
+
+   Spectre variant 1 attacks are possible if parameters can be passed
+   between guests.  This may be done via mechanisms such as shared memory
+   or message passing.  Such parameters could be used to derive data
+   pointers to privileged data in guest.  The privileged data could be
+   accessed by gadget code in the victim's speculation paths.
+
+   Spectre variant 2 attacks can be launched from a rogue guest by
+   :ref:`poisoning <poison_btb>` the branch target buffer or the return
+   stack buffer. Such poisoned entries could be used to influence
+   speculation execution paths in the victim guest.
+
+   Linux kernel mitigates attacks to other guests running in the same
+   CPU hardware thread by flushing the return stack buffer on VM exit,
+   and clearing the branch target buffer before switching to a new guest.
+
+   If SMT is used, Spectre variant 2 attacks from an untrusted guest
+   in the sibling hyperthread can be mitigated by the administrator,
+   by turning off the unsafe guest's indirect branch speculation via
+   prctl().  A guest can also protect itself by turning on microcode
+   based mitigations (such as IBPB or STIBP on x86) within the guest.
+
+.. _spectre_sys_info:
+
+Spectre system information
+--------------------------
+
+The Linux kernel provides a sysfs interface to enumerate the current
+mitigation status of the system for Spectre: whether the system is
+vulnerable, and which mitigations are active.
+
+The sysfs file showing Spectre variant 1 mitigation status is:
+
+   /sys/devices/system/cpu/vulnerabilities/spectre_v1
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable.
+     * - 'Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers'
+       - The swapgs protections are disabled; otherwise it has
+         protection in the kernel on a case by case base with explicit
+         pointer sanitation and usercopy LFENCE barriers.
+     * - 'Mitigation: usercopy/swapgs barriers and __user pointer sanitization'
+       - Protection in the kernel on a case by case base with explicit
+         pointer sanitation, usercopy LFENCE barriers, and swapgs LFENCE
+         barriers.
+
+However, the protections are put in place on a case by case basis,
+and there is no guarantee that all possible attack vectors for Spectre
+variant 1 are covered.
+
+The spectre_v2 kernel file reports if the kernel has been compiled with
+retpoline mitigation or if the CPU has hardware mitigation, and if the
+CPU has support for additional process-specific mitigation.
+
+This file also reports CPU features enabled by microcode to mitigate
+attack between user processes:
+
+1. Indirect Branch Prediction Barrier (IBPB) to add additional
+   isolation between processes of different users.
+2. Single Thread Indirect Branch Predictors (STIBP) to add additional
+   isolation between CPU threads running on the same core.
+
+These CPU features may impact performance when used and can be enabled
+per process on a case-by-case base.
+
+The sysfs file showing Spectre variant 2 mitigation status is:
+
+   /sys/devices/system/cpu/vulnerabilities/spectre_v2
+
+The possible values in this file are:
+
+  - Kernel status:
+
+  ====================================  =================================
+  'Not affected'                        The processor is not vulnerable
+  'Vulnerable'                          Vulnerable, no mitigation
+  'Mitigation: Full generic retpoline'  Software-focused mitigation
+  'Mitigation: Full AMD retpoline'      AMD-specific software mitigation
+  'Mitigation: Enhanced IBRS'           Hardware-focused mitigation
+  ====================================  =================================
+
+  - Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is
+    used to protect against Spectre variant 2 attacks when calling firmware (x86 only).
+
+  ========== =============================================================
+  'IBRS_FW'  Protection against user program attacks when calling firmware
+  ========== =============================================================
+
+  - Indirect branch prediction barrier (IBPB) status for protection between
+    processes of different users. This feature can be controlled through
+    prctl() per process, or through kernel command line options. This is
+    an x86 only feature. For more details see below.
+
+  ===================   ========================================================
+  'IBPB: disabled'      IBPB unused
+  'IBPB: always-on'     Use IBPB on all tasks
+  'IBPB: conditional'   Use IBPB on SECCOMP or indirect branch restricted tasks
+  ===================   ========================================================
+
+  - Single threaded indirect branch prediction (STIBP) status for protection
+    between different hyper threads. This feature can be controlled through
+    prctl per process, or through kernel command line options. This is x86
+    only feature. For more details see below.
+
+  ====================  ========================================================
+  'STIBP: disabled'     STIBP unused
+  'STIBP: forced'       Use STIBP on all tasks
+  'STIBP: conditional'  Use STIBP on SECCOMP or indirect branch restricted tasks
+  ====================  ========================================================
+
+  - Return stack buffer (RSB) protection status:
+
+  =============   ===========================================
+  'RSB filling'   Protection of RSB on context switch enabled
+  =============   ===========================================
+
+Full mitigation might require a microcode update from the CPU
+vendor. When the necessary microcode is not available, the kernel will
+report vulnerability.
+
+Turning on mitigation for Spectre variant 1 and Spectre variant 2
+-----------------------------------------------------------------
+
+1. Kernel mitigation
+^^^^^^^^^^^^^^^^^^^^
+
+Spectre variant 1
+~~~~~~~~~~~~~~~~~
+
+   For the Spectre variant 1, vulnerable kernel code (as determined
+   by code audit or scanning tools) is annotated on a case by case
+   basis to use nospec accessor macros for bounds clipping :ref:`[2]
+   <spec_ref2>` to avoid any usable disclosure gadgets. However, it may
+   not cover all attack vectors for Spectre variant 1.
+
+   Copy-from-user code has an LFENCE barrier to prevent the access_ok()
+   check from being mis-speculated.  The barrier is done by the
+   barrier_nospec() macro.
+
+   For the swapgs variant of Spectre variant 1, LFENCE barriers are
+   added to interrupt, exception and NMI entry where needed.  These
+   barriers are done by the FENCE_SWAPGS_KERNEL_ENTRY and
+   FENCE_SWAPGS_USER_ENTRY macros.
+
+Spectre variant 2
+~~~~~~~~~~~~~~~~~
+
+   For Spectre variant 2 mitigation, the compiler turns indirect calls or
+   jumps in the kernel into equivalent return trampolines (retpolines)
+   :ref:`[3] <spec_ref3>` :ref:`[9] <spec_ref9>` to go to the target
+   addresses.  Speculative execution paths under retpolines are trapped
+   in an infinite loop to prevent any speculative execution jumping to
+   a gadget.
+
+   To turn on retpoline mitigation on a vulnerable CPU, the kernel
+   needs to be compiled with a gcc compiler that supports the
+   -mindirect-branch=thunk-extern -mindirect-branch-register options.
+   If the kernel is compiled with a Clang compiler, the compiler needs
+   to support -mretpoline-external-thunk option.  The kernel config
+   CONFIG_RETPOLINE needs to be turned on, and the CPU needs to run with
+   the latest updated microcode.
+
+   On Intel Skylake-era systems the mitigation covers most, but not all,
+   cases. See :ref:`[3] <spec_ref3>` for more details.
+
+   On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
+   IBRS on x86), retpoline is automatically disabled at run time.
+
+   The retpoline mitigation is turned on by default on vulnerable
+   CPUs. It can be forced on or off by the administrator
+   via the kernel command line and sysfs control files. See
+   :ref:`spectre_mitigation_control_command_line`.
+
+   On x86, indirect branch restricted speculation is turned on by default
+   before invoking any firmware code to prevent Spectre variant 2 exploits
+   using the firmware.
+
+   Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+   and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
+   attacks on the kernel generally more difficult.
+
+2. User program mitigation
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   User programs can mitigate Spectre variant 1 using LFENCE or "bounds
+   clipping". For more details see :ref:`[2] <spec_ref2>`.
+
+   For Spectre variant 2 mitigation, individual user programs
+   can be compiled with return trampolines for indirect branches.
+   This protects them from consuming poisoned entries in the branch
+   target buffer left by malicious software.  Alternatively, the
+   programs can disable their indirect branch speculation via prctl()
+   (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+   On x86, this will turn on STIBP to guard against attacks from the
+   sibling thread when the user program is running, and use IBPB to
+   flush the branch target buffer when switching to/from the program.
+
+   Restricting indirect branch speculation on a user program will
+   also prevent the program from launching a variant 2 attack
+   on x86.  All sand-boxed SECCOMP programs have indirect branch
+   speculation restricted by default.  Administrators can change
+   that behavior via the kernel command line and sysfs control files.
+   See :ref:`spectre_mitigation_control_command_line`.
+
+   Programs that disable their indirect branch speculation will have
+   more overhead and run slower.
+
+   User programs should use address space randomization
+   (/proc/sys/kernel/randomize_va_space = 1 or 2) to make attacks more
+   difficult.
+
+3. VM mitigation
+^^^^^^^^^^^^^^^^
+
+   Within the kernel, Spectre variant 1 attacks from rogue guests are
+   mitigated on a case by case basis in VM exit paths. Vulnerable code
+   uses nospec accessor macros for "bounds clipping", to avoid any
+   usable disclosure gadgets.  However, this may not cover all variant
+   1 attack vectors.
+
+   For Spectre variant 2 attacks from rogue guests to the kernel, the
+   Linux kernel uses retpoline or Enhanced IBRS to prevent consumption of
+   poisoned entries in branch target buffer left by rogue guests.  It also
+   flushes the return stack buffer on every VM exit to prevent a return
+   stack buffer underflow so poisoned branch target buffer could be used,
+   or attacker guests leaving poisoned entries in the return stack buffer.
+
+   To mitigate guest-to-guest attacks in the same CPU hardware thread,
+   the branch target buffer is sanitized by flushing before switching
+   to a new guest on a CPU.
+
+   The above mitigations are turned on by default on vulnerable CPUs.
+
+   To mitigate guest-to-guest attacks from sibling thread when SMT is
+   in use, an untrusted guest running in the sibling thread can have
+   its indirect branch speculation disabled by administrator via prctl().
+
+   The kernel also allows guests to use any microcode based mitigation
+   they choose to use (such as IBPB or STIBP on x86) to protect themselves.
+
+.. _spectre_mitigation_control_command_line:
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+Spectre variant 2 mitigation can be disabled or force enabled at the
+kernel command line.
+
+	nospectre_v1
+
+		[X86,PPC] Disable mitigations for Spectre Variant 1
+		(bounds check bypass). With this option data leaks are
+		possible in the system.
+
+	nospectre_v2
+
+		[X86] Disable all mitigations for the Spectre variant 2
+		(indirect branch prediction) vulnerability. System may
+		allow data leaks with this option, which is equivalent
+		to spectre_v2=off.
+
+
+        spectre_v2=
+
+		[X86] Control mitigation of Spectre variant 2
+		(indirect branch speculation) vulnerability.
+		The default operation protects the kernel from
+		user space attacks.
+
+		on
+			unconditionally enable, implies
+			spectre_v2_user=on
+		off
+			unconditionally disable, implies
+		        spectre_v2_user=off
+		auto
+			kernel detects whether your CPU model is
+		        vulnerable
+
+		Selecting 'on' will, and 'auto' may, choose a
+		mitigation method at run time according to the
+		CPU, the available microcode, the setting of the
+		CONFIG_RETPOLINE configuration option, and the
+		compiler with which the kernel was built.
+
+		Selecting 'on' will also enable the mitigation
+		against user space to user space task attacks.
+
+		Selecting 'off' will disable both the kernel and
+		the user space protections.
+
+		Specific mitigations can also be selected manually:
+
+		retpoline
+					replace indirect branches
+		retpoline,generic
+					google's original retpoline
+		retpoline,amd
+					AMD-specific minimal thunk
+
+		Not specifying this option is equivalent to
+		spectre_v2=auto.
+
+For user space mitigation:
+
+        spectre_v2_user=
+
+		[X86] Control mitigation of Spectre variant 2
+		(indirect branch speculation) vulnerability between
+		user space tasks
+
+		on
+			Unconditionally enable mitigations. Is
+			enforced by spectre_v2=on
+
+		off
+			Unconditionally disable mitigations. Is
+			enforced by spectre_v2=off
+
+		prctl
+			Indirect branch speculation is enabled,
+			but mitigation can be enabled via prctl
+			per thread. The mitigation control state
+			is inherited on fork.
+
+		prctl,ibpb
+			Like "prctl" above, but only STIBP is
+			controlled per thread. IBPB is issued
+			always when switching between different user
+			space processes.
+
+		seccomp
+			Same as "prctl" above, but all seccomp
+			threads will enable the mitigation unless
+			they explicitly opt out.
+
+		seccomp,ibpb
+			Like "seccomp" above, but only STIBP is
+			controlled per thread. IBPB is issued
+			always when switching between different
+			user space processes.
+
+		auto
+			Kernel selects the mitigation depending on
+			the available CPU features and vulnerability.
+
+		Default mitigation:
+		If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
+
+		Not specifying this option is equivalent to
+		spectre_v2_user=auto.
+
+		In general the kernel by default selects
+		reasonable mitigations for the current CPU. To
+		disable Spectre variant 2 mitigations, boot with
+		spectre_v2=off. Spectre variant 1 mitigations
+		cannot be disabled.
+
+Mitigation selection guide
+--------------------------
+
+1. Trusted userspace
+^^^^^^^^^^^^^^^^^^^^
+
+   If all userspace applications are from trusted sources and do not
+   execute externally supplied untrusted code, then the mitigations can
+   be disabled.
+
+2. Protect sensitive programs
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   For security-sensitive programs that have secrets (e.g. crypto
+   keys), protection against Spectre variant 2 can be put in place by
+   disabling indirect branch speculation when the program is running
+   (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+
+3. Sandbox untrusted programs
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   Untrusted programs that could be a source of attacks can be cordoned
+   off by disabling their indirect branch speculation when they are run
+   (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+   This prevents untrusted programs from polluting the branch target
+   buffer.  All programs running in SECCOMP sandboxes have indirect
+   branch speculation restricted by default. This behavior can be
+   changed via the kernel command line and sysfs control files. See
+   :ref:`spectre_mitigation_control_command_line`.
+
+3. High security mode
+^^^^^^^^^^^^^^^^^^^^^
+
+   All Spectre variant 2 mitigations can be forced on
+   at boot time for all programs (See the "on" option in
+   :ref:`spectre_mitigation_control_command_line`).  This will add
+   overhead as indirect branch speculations for all programs will be
+   restricted.
+
+   On x86, branch target buffer will be flushed with IBPB when switching
+   to a new program. STIBP is left on all the time to protect programs
+   against variant 2 attacks originating from programs running on
+   sibling threads.
+
+   Alternatively, STIBP can be used only when running programs
+   whose indirect branch speculation is explicitly disabled,
+   while IBPB is still used all the time when switching to a new
+   program to clear the branch target buffer (See "ibpb" option in
+   :ref:`spectre_mitigation_control_command_line`).  This "ibpb" option
+   has less performance cost than the "on" option, which leaves STIBP
+   on all the time.
+
+References on Spectre
+---------------------
+
+Intel white papers:
+
+.. _spec_ref1:
+
+[1] `Intel analysis of speculative execution side channels <https://newsroom.intel.com/wp-content/uploads/sites/11/2018/01/Intel-Analysis-of-Speculative-Execution-Side-Channels.pdf>`_.
+
+.. _spec_ref2:
+
+[2] `Bounds check bypass <https://software.intel.com/security-software-guidance/software-guidance/bounds-check-bypass>`_.
+
+.. _spec_ref3:
+
+[3] `Deep dive: Retpoline: A branch target injection mitigation <https://software.intel.com/security-software-guidance/insights/deep-dive-retpoline-branch-target-injection-mitigation>`_.
+
+.. _spec_ref4:
+
+[4] `Deep Dive: Single Thread Indirect Branch Predictors <https://software.intel.com/security-software-guidance/insights/deep-dive-single-thread-indirect-branch-predictors>`_.
+
+AMD white papers:
+
+.. _spec_ref5:
+
+[5] `AMD64 technology indirect branch control extension <https://developer.amd.com/wp-content/resources/Architecture_Guidelines_Update_Indirect_Branch_Control.pdf>`_.
+
+.. _spec_ref6:
+
+[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/90343-B_SoftwareTechniquesforManagingSpeculation_WP_7-18Update_FNL.pdf>`_.
+
+ARM white papers:
+
+.. _spec_ref7:
+
+[7] `Cache speculation side-channels <https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability/download-the-whitepaper>`_.
+
+.. _spec_ref8:
+
+[8] `Cache speculation issues update <https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability/latest-updates/cache-speculation-issues-update>`_.
+
+Google white paper:
+
+.. _spec_ref9:
+
+[9] `Retpoline: a software construct for preventing branch-target-injection <https://support.google.com/faqs/answer/7625886>`_.
+
+MIPS white paper:
+
+.. _spec_ref10:
+
+[10] `MIPS: response on speculative execution and side channel vulnerabilities <https://www.mips.com/blog/mips-response-on-speculative-execution-and-side-channel-vulnerabilities/>`_.
+
+Academic papers:
+
+.. _spec_ref11:
+
+[11] `Spectre Attacks: Exploiting Speculative Execution <https://spectreattack.com/spectre.pdf>`_.
+
+.. _spec_ref12:
+
+[12] `NetSpectre: Read Arbitrary Memory over Network <https://arxiv.org/abs/1807.10535>`_.
+
+.. _spec_ref13:
+
+[13] `Spectre Returns! Speculation Attacks using the Return Stack Buffer <https://www.usenix.org/system/files/conference/woot18/woot18-paper-koruyeh.pdf>`_.

Documentation/admin-guide/kernel-parameters.txt

@@ -2587,7 +2587,7 @@
 				expose users to several CPU vulnerabilities.
 				Equivalent to: nopti [X86,PPC]
 					       kpti=0 [ARM64]
-					       nospectre_v1 [PPC]
+					       nospectre_v1 [X86,PPC]
 					       nobp=0 [S390]
 					       nospectre_v2 [X86,PPC,S390,ARM64]
 					       spectre_v2_user=off [X86]
@@ -2936,9 +2936,9 @@
 			nosmt=force: Force disable SMT, cannot be undone
 				     via the sysfs control file.
 
-	nospectre_v1	[PPC] Disable mitigations for Spectre Variant 1 (bounds
-			check bypass). With this option data leaks are possible
-			in the system.
+	nospectre_v1	[X86,PPC] Disable mitigations for Spectre Variant 1
+			(bounds check bypass). With this option data leaks are
+			possible in the system.
 
 	nospectre_v2	[X86,PPC_FSL_BOOK3E,ARM64] Disable all mitigations for
 			the Spectre variant 2 (indirect branch prediction)
@@ -4055,6 +4055,13 @@
 			Run specified binary instead of /init from the ramdisk,
 			used for early userspace startup. See initrd.
 
+	rdrand=		[X86]
+			force - Override the decision by the kernel to hide the
+				advertisement of RDRAND support (this affects
+				certain AMD processors because of buggy BIOS
+				support, specifically around the suspend/resume
+				path).
+
 	rdt=		[HW,X86,RDT]
 			Turn on/off individual RDT features. List is:
 			cmt, mbmtotal, mbmlocal, l3cat, l3cdp, l2cat, l2cdp,
@@ -5102,12 +5109,6 @@
 			emulate     [default] Vsyscalls turn into traps and are
 			            emulated reasonably safely.
 
-			native      Vsyscalls are native syscall instructions.
-			            This is a little bit faster than trapping
-			            and makes a few dynamic recompilers work
-			            better than they would in emulation mode.
-			            It also makes exploits much easier to write.
-
 			none        Vsyscalls don't work at all.  This makes
 			            them quite hard to use for exploits but
 			            might break your system.

Documentation/atomic_t.txt

@@ -194,6 +194,9 @@ These helper barriers exist because architectures have varying implicit
 ordering on their SMP atomic primitives. For example our TSO architectures
 provide full ordered atomics and these barriers are no-ops.
 
+NOTE: when the atomic RmW ops are fully ordered, they should also imply a
+compiler barrier.
+
 Thus:
 
   atomic_fetch_add();

Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt

@@ -0,0 +1,9 @@
+Armadeus ST0700 Adapt. A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with
+an adapter board.
+
+Required properties:
+- compatible: "armadeus,st0700-adapt"
+- power-supply: see panel-common.txt
+
+Optional properties:
+- backlight: see panel-common.txt

Documentation/devicetree/bindings/hwmon/rpi-poe-fan.txt

@@ -0,0 +1,55 @@
+Bindings for the Raspberry Pi PoE HAT fan
+
+Required properties:
+- compatible	: "raspberrypi,rpi-poe-fan"
+- firmware	: Reference to the RPi firmware device node
+- pwms		: the PWM that is used to control the PWM fan
+- cooling-levels      : PWM duty cycle values in a range from 0 to 255
+			which correspond to thermal cooling states
+
+Example:
+	fan0: rpi-poe-fan@0 {
+		compatible = "raspberrypi,rpi-poe-fan";
+		firmware = <&firmware>;
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 50 150 255>;
+		status = "okay";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			trips {
+				threshold: trip-point@0 {
+					temperature = <45000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				target: trip-point@1 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_hot: cpu_hot@0 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&threshold>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu_hot>;
+					cooling-device = <&fan0 2 3>;
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml

@@ -23,16 +23,17 @@ properties:
   reg:
     maxItems: 1
 
-  ti,linear-mapping-mode:
-    description: |
-      Enable linear mapping mode. If disabled, then it will use exponential
-      mapping mode in which the ramp up/down appears to have a more uniform
-      transition to the human eye.
-    type: boolean
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
 
 required:
   - compatible
   - reg
+  - '#address-cells'
+  - '#size-cells'
 
 patternProperties:
   "^led@[01]$":
@@ -48,7 +49,6 @@ patternProperties:
           in this property. The two current sinks can be controlled
           independently with both banks, or bank A can be configured to control
           both sinks with the led-sources property.
-        maxItems: 1
         minimum: 0
         maximum: 1
 
@@ -73,6 +73,13 @@ patternProperties:
         minimum: 0
         maximum: 255
 
+      ti,linear-mapping-mode:
+        description: |
+          Enable linear mapping mode. If disabled, then it will use exponential
+          mapping mode in which the ramp up/down appears to have a more uniform
+          transition to the human eye.
+        type: boolean
+
     required:
       - reg
 

Documentation/devicetree/bindings/media/bcm2835-unicam.txt

@@ -0,0 +1,85 @@
+Broadcom BCM283x Camera Interface (Unicam)
+------------------------------------------
+
+The Unicam block on BCM283x SoCs is the receiver for either
+CSI-2 or CCP2 data from image sensors or similar devices.
+
+The main platform using this SoC is the Raspberry Pi family of boards.
+On the Pi the VideoCore firmware can also control this hardware block,
+and driving it from two different processors will cause issues.
+To avoid this, the firmware checks the device tree configuration
+during boot. If it finds device tree nodes called csi0 or csi1 then
+it will stop the firmware accessing the block, and it can then
+safely be used via the device tree binding.
+
+Required properties:
+===================
+- compatible	: must be "brcm,bcm2835-unicam".
+- reg		: physical base address and length of the register sets for the
+		  device.
+- interrupts	: should contain the IRQ line for this Unicam instance.
+- clocks	: list of clock specifiers, corresponding to entries in
+		  clock-names property.
+- clock-names	: must contain an "lp" entry, matching entries in the
+		  clocks property.
+
+Unicam supports a single port node. It should contain one 'port' child node
+with child 'endpoint' node. Please refer to the bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Within the endpoint node the "remote-endpoint" and "data-lanes" properties
+are mandatory.
+Data lane reordering is not supported so the data lanes must be in order,
+starting at 1. The number of data lanes should represent the number of
+usable lanes for the hardware block. That may be limited by either the SoC or
+how the platform presents the interface, and the lower value must be used.
+
+Lane reordering is not supported on the clock lane either, so the optional
+property "clock-lane" will implicitly be <0>.
+Similarly lane inversion is not supported, therefore "lane-polarities" will
+implicitly be <0 0 0 0 0>.
+Neither of these values will be checked.
+
+Example:
+	csi1: csi1@7e801000 {
+		compatible = "brcm,bcm2835-unicam";
+		reg = <0x7e801000 0x800>,
+		      <0x7e802004 0x4>;
+		interrupts = <2 7>;
+		clocks = <&clocks BCM2835_CLOCK_CAM1>;
+		clock-names = "lp";
+
+		port {
+			csi1_ep: endpoint {
+				remote-endpoint = <&tc358743_0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	i2c0: i2c@7e205000 {
+		tc358743: csi-hdmi-bridge@0f {
+			compatible = "toshiba,tc358743";
+			reg = <0x0f>;
+
+			clocks = <&tc358743_clk>;
+			clock-names = "refclk";
+
+			tc358743_clk: bridge-clk {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <27000000>;
+			};
+
+			port {
+				tc358743_0: endpoint {
+					remote-endpoint = <&csi1_ep>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+					clock-noncontinuous;
+					link-frequencies =
+						/bits/ 64 <297000000>;
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/media/i2c/imx219.txt

@@ -0,0 +1,59 @@
+* Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
+
+The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor with
+an active array size of 3280H x 2464V. It is programmable through I2C
+interface. The I2C address is fixed to 0x10 as per sensor data sheet.
+Image data is sent through MIPI CSI-2, which is configured as either 2 or 4
+data lanes.
+
+Required Properties:
+- compatible: value should be "sony,imx219" for imx219 sensor
+- reg: I2C bus address of the device
+- clocks: reference to the xclk input clock.
+- clock-names: should be "xclk".
+- DOVDD-supply: Digital I/O voltage supply, 1.8 volts
+- AVDD-supply: Analog voltage supply, 2.8 volts
+- DVDD-supply: Digital core voltage supply, 1.2 volts
+
+Optional Properties:
+- xclr-gpios: reference to the GPIO connected to the xclr pin, if any. Must be
+	      released after all supplies are applied.
+	      This is an active high signal to the imx219.
+
+The imx219 device node should contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Endpoint node required properties for CSI-2 connection are:
+- remote-endpoint: a phandle to the bus receiver's endpoint node.
+- clock-lanes: should be set to <0> (clock lane on hardware lane 0)
+- data-lanes: should be set to <1 2>, or  <1 2 3 4> (two or four lane CSI-2
+  supported)
+
+Example:
+	sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&imx219_clk>;
+		clock-names = "xclk";
+		xclr-gpios = <&gpio_sensor 0 0>;
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v */
+		DVDD-supply = <&vgen2_reg>;  /* 1.2v */
+
+		imx219_clk: camera-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+
+		port {
+			sensor_out: endpoint {
+				remote-endpoint = <&csiss_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};

Documentation/devicetree/bindings/media/i2c/irs1125.txt

@@ -0,0 +1,48 @@
+* Infineon irs1125 time of flight sensor
+
+The Infineon irs1125 is a time of flight digital image sensor with
+an active array size of 352H x 286V. It is programmable through I2C
+interface. The I2C address defaults to 0x3D, but can be reconfigured
+to address 0x3C or 0x41 via I2C commands. Image data is sent through
+MIPI CSI-2, which is configured as either 1 or 2 data lanes.
+
+Required Properties:
+- compatible: value should be "infineon,irs1125" for irs1125 sensor
+- reg: I2C bus address of the device
+- clocks: reference to the xclk input clock.
+- pwdn-gpios: reference to the GPIO connected to the reset pin.
+	      This is an active low signal to the iirs1125.
+
+The irs1125 device node should contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Endpoint node required properties for CSI-2 connection are:
+- remote-endpoint: a phandle to the bus receiver's endpoint node.
+- clock-lanes: should be set to <0> (clock lane on hardware lane 0)
+- data-lanes: should be set to <1> or <1 2> (one or two lane CSI-2
+  supported)
+
+Example:
+	sensor@10 {
+		compatible = "infineon,irs1125";
+		reg = <0x3D>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&irs1125_clk>;
+		pwdn-gpios = <&gpio 5 0>;
+
+		irs1125_clk: camera-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+
+		port {
+			sensor_out: endpoint {
+				remote-endpoint = <&csiss_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};

Documentation/devicetree/bindings/media/i2c/ov5647.txt

@@ -10,6 +10,9 @@ Required properties:
 - reg			: I2C slave address of the sensor.
 - clocks		: Reference to the xclk clock.
 
+Optional Properties:
+- pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any.
+
 The common video interfaces bindings (see video-interfaces.txt) should be
 used to specify link to the image data receiver. The OV5647 device
 node should contain one 'port' child node with an 'endpoint' subnode.
@@ -26,6 +29,7 @@ Example:
 			compatible = "ovti,ov5647";
 			reg = <0x36>;
 			clocks = <&camera_clk>;
+			pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
 			port {
 				camera_1: endpoint {
 					remote-endpoint = <&csi1_ep1>;

Documentation/devicetree/bindings/misc/brcm,bcm2835-smi-dev.txt

@@ -0,0 +1,17 @@
+* Broadcom BCM2835 SMI character device driver.
+
+SMI or secondary memory interface is a peripheral specific to certain Broadcom
+SOCs, and is helpful for talking to things like parallel-interface displays
+and NAND flashes (in fact, most things with a parallel register interface).
+
+This driver adds a character device which provides a user-space interface to
+an instance of the SMI driver.
+
+Required properties:
+- compatible: "brcm,bcm2835-smi-dev"
+- smi_handle: a phandle to the smi node.
+
+Optional properties:
+- None.
+
+

Documentation/devicetree/bindings/misc/brcm,bcm2835-smi.txt

@@ -0,0 +1,48 @@
+* Broadcom BCM2835 SMI driver.
+
+SMI or secondary memory interface is a peripheral specific to certain Broadcom
+SOCs, and is helpful for talking to things like parallel-interface displays
+and NAND flashes (in fact, most things with a parallel register interface).
+
+Required properties:
+- compatible: "brcm,bcm2835-smi"
+- reg: Should contain location and length of SMI registers and SMI clkman regs
+- interrupts: *the* SMI interrupt.
+- pinctrl-names: should be "default".
+- pinctrl-0: the phandle of the gpio pin node.
+- brcm,smi-clock-source: the clock source for clkman
+- brcm,smi-clock-divisor: the integer clock divisor for clkman
+- dmas: the dma controller phandle and the DREQ number (4 on a 2835)
+- dma-names: the name used by the driver to request its channel.
+  Should be "rx-tx".
+
+Optional properties:
+- None.
+
+Examples:
+
+8 data pin configuration:
+
+smi: smi@7e600000 {
+	compatible = "brcm,bcm2835-smi";
+	reg = <0x7e600000 0x44>, <0x7e1010b0 0x8>;
+	interrupts = <2 16>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+	brcm,smi-clock-source = <6>;
+	brcm,smi-clock-divisor = <4>;
+	dmas = <&dma 4>;
+	dma-names = "rx-tx";
+
+	status = "okay";
+};
+
+smi_pins: smi_pins {
+	brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+	/* Alt 1: SMI */
+	brcm,function = <5 5 5 5 5 5 5 5 5 5 5 5 5 5>;
+	/* /CS, /WE and /OE are pulled high, as they are
+	   generally active low signals */
+	brcm,pull = <2 2 2 2 2 2 0 0 0 0 0 0 0 0>;
+};
+

Documentation/devicetree/bindings/net/marvell-orion-mdio.txt

@@ -16,7 +16,7 @@ Required properties:
 
 Optional properties:
 - interrupts: interrupt line number for the SMI error/done interrupt
-- clocks: phandle for up to three required clocks for the MDIO instance
+- clocks: phandle for up to four required clocks for the MDIO instance
 
 The child nodes of the MDIO driver are the individual PHY devices
 connected to this MDIO bus. They must have a "reg" property given the

Documentation/devicetree/bindings/net/microchip,lan78xx.txt

@@ -14,6 +14,9 @@ Optional properties of the embedded PHY:
 - microchip,led-modes: a 0..4 element vector, with each element configuring
   the operating mode of an LED. Omitted LEDs are turned off. Allowed values
   are defined in "include/dt-bindings/net/microchip-lan78xx.h".
+- microchip,downshift-after: sets the number of failed auto-negotiation
+  attempts after which the link is downgraded from 1000BASE-T. Should be one of
+  2, 3, 4, 5 or 0, where 0 means never downshift.
 
 Example:
 

Documentation/devicetree/bindings/pci/brcmstb-pcie.txt

@@ -0,0 +1,59 @@
+Brcmstb PCIe Host Controller Device Tree Bindings
+
+Required Properties:
+- compatible
+  "brcm,bcm7425-pcie" -- for 7425 family MIPS-based SOCs.
+  "brcm,bcm7435-pcie" -- for 7435 family MIPS-based SOCs.
+  "brcm,bcm7445-pcie" -- for 7445 and later ARM based SOCs (not including
+      the 7278).
+  "brcm,bcm7278-pcie"  -- for 7278 family ARM-based SOCs.
+
+- reg -- the register start address and length for the PCIe reg block.
+- interrupts -- two interrupts are specified; the first interrupt is for
+     the PCI host controller and the second is for MSI if the built-in
+     MSI controller is to be used.
+- interrupt-names -- names of the interrupts (above): "pcie" and "msi".
+- #address-cells -- set to <3>.
+- #size-cells -- set to <2>.
+- #interrupt-cells: set to <1>.
+- interrupt-map-mask and interrupt-map, standard PCI properties to define the
+     mapping of the PCIe interface to interrupt numbers.
+- ranges: ranges for the PCI memory and I/O regions.
+- linux,pci-domain -- should be unique per host controller.
+
+Optional Properties:
+- clocks -- phandle of pcie clock.
+- clock-names -- set to "sw_pcie" if clocks is used.
+- dma-ranges -- Specifies the inbound memory mapping regions when
+     an "identity map" is not possible.
+- msi-controller -- this property is typically specified to have the
+     PCIe controller use its internal MSI controller.
+- msi-parent -- set to use an external MSI interrupt controller.
+- brcm,enable-ssc -- (boolean) indicates usage of spread-spectrum clocking.
+- max-link-speed --  (integer) indicates desired generation of link:
+     1 => 2.5 Gbps (gen1), 2 => 5.0 Gbps (gen2), 3 => 8.0 Gbps (gen3).
+
+Example Node:
+
+pcie0: pcie@f0460000 {
+		reg = <0x0 0xf0460000 0x0 0x9310>;
+		interrupts = <0x0 0x0 0x4>;
+		compatible = "brcm,bcm7445-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x02000000 0x00000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x08000000
+			  0x02000000 0x00000000 0x08000000 0x00000000 0xc8000000 0x00000000 0x08000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &intc 0 47 3
+				 0 0 0 2 &intc 0 48 3
+				 0 0 0 3 &intc 0 49 3
+				 0 0 0 4 &intc 0 50 3>;
+		clocks = <&sw_pcie0>;
+		clock-names = "sw_pcie";
+		msi-parent = <&pcie0>;  /* use PCIe's internal MSI controller */
+		msi-controller;         /* use PCIe's internal MSI controller */
+		brcm,ssc;
+		max-link-speed = <1>;
+		linux,pci-domain = <0>;
+	};

Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt

@@ -31,6 +31,7 @@ Optional properties:
 - inactive-delay-ms: Delay (default 100) to wait after driving gpio inactive
 - timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is
               specified, 3000 ms is used.
+- export : Export the GPIO line to the sysfs system
 
 Examples:
 

Documentation/devicetree/bindings/riscv/sifive.yaml

@@ -19,7 +19,7 @@ properties:
   compatible:
     items:
       - enum:
-          - sifive,freedom-unleashed-a00
+          - sifive,hifive-unleashed-a00
       - const: sifive,fu540-c000
       - const: sifive,fu540
 ...

Documentation/devicetree/bindings/rtc/rtc.txt

@@ -26,6 +26,7 @@ below.
 - trickle-diode-disable :   Do not use internal trickle charger diode Should be
                             given if internal trickle charger diode should be
                             disabled
+- backup-switchover-mode :  Configure RTC backup power supply switch behaviour
 - wakeup-source :           Enables wake up of host system on alarm
 - quartz-load-femtofarads : The capacitive load of the quartz(x-tal),
                             expressed in femto Farad (fF).

Documentation/devicetree/bindings/serial/pl011.yaml

@@ -100,6 +100,12 @@ properties:
       - $ref: /schemas/types.yaml#/definitions/uint32
       - default: 3000
 
+  cts-event-workaround:
+    description:
+      Enables the (otherwise vendor-specific) workaround for the
+      CTS-induced TX lockup.
+    type: boolean
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/usb/usb251xb.txt

@@ -64,10 +64,8 @@ Optional properties :
  - power-on-time-ms : Specifies the time it takes from the time the host
 	initiates the power-on sequence to a port until the port has adequate
 	power. The value is given in ms in a 0 - 510 range (default is 100ms).
- - swap-dx-lanes : Specifies the downstream ports which will swap the
-	differential-pair (D+/D-), default is not-swapped.
- - swap-us-lanes : Selects the upstream port differential-pair (D+/D-)
-	swapping (boolean, default is not-swapped)
+ - swap-dx-lanes : Specifies the ports which will swap the differential-pair
+	(D+/D-), default is not-swapped.
 
 Examples:
 	usb2512b@2c {

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -0,0 +1,463 @@
+Device tree binding vendor prefix registry.  Keep list in alphabetical order.
+
+This isn't an exhaustive list, but you should add new prefixes to it before
+using them to avoid name-space collisions.
+
+abilis	Abilis Systems
+abracon	Abracon Corporation
+actions	Actions Semiconductor Co., Ltd.
+active-semi	Active-Semi International Inc
+ad	Avionic Design GmbH
+adafruit	Adafruit Industries, LLC
+adapteva	Adapteva, Inc.
+adaptrum	Adaptrum, Inc.
+adh	AD Holdings Plc.
+adi	Analog Devices, Inc.
+advantech	Advantech Corporation
+aeroflexgaisler	Aeroflex Gaisler AB
+al	Annapurna Labs
+allo	Allo.com
+allwinner	Allwinner Technology Co., Ltd.
+alphascale	AlphaScale Integrated Circuits Systems, Inc.
+altr	Altera Corp.
+amarula	Amarula Solutions
+amazon	Amazon.com, Inc.
+amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
+amd	Advanced Micro Devices (AMD), Inc.
+amediatech	Shenzhen Amediatech Technology Co., Ltd
+amlogic	Amlogic, Inc.
+ampire	Ampire Co., Ltd.
+ams	AMS AG
+amstaos	AMS-Taos Inc.
+analogix	Analogix Semiconductor, Inc.
+andestech	Andes Technology Corporation
+apm	Applied Micro Circuits Corporation (APM)
+aptina	Aptina Imaging
+arasan	Arasan Chip Systems
+archermind ArcherMind Technology (Nanjing) Co., Ltd.
+arctic	Arctic Sand
+aries	Aries Embedded GmbH
+arm	ARM Ltd.
+armadeus	ARMadeus Systems SARL
+arrow	Arrow Electronics
+artesyn	Artesyn Embedded Technologies Inc.
+asahi-kasei	Asahi Kasei Corp.
+aspeed	ASPEED Technology Inc.
+asus	AsusTek Computer Inc.
+atlas	Atlas Scientific LLC
+atmel	Atmel Corporation
+auo	AU Optronics Corporation
+auvidea Auvidea GmbH
+avago	Avago Technologies
+avia	avia semiconductor
+avic	Shanghai AVIC Optoelectronics Co., Ltd.
+avnet	Avnet, Inc.
+axentia	Axentia Technologies AB
+axis	Axis Communications AB
+bananapi BIPAI KEJI LIMITED
+bhf	Beckhoff Automation GmbH & Co. KG
+bitmain	Bitmain Technologies
+blokaslabs	Vilniaus Blokas UAB
+boe	BOE Technology Group Co., Ltd.
+bosch	Bosch Sensortec GmbH
+boundary	Boundary Devices Inc.
+brcm	Broadcom Corporation
+buffalo	Buffalo, Inc.
+bticino Bticino International
+calxeda	Calxeda
+capella	Capella Microsystems, Inc
+cascoda	Cascoda, Ltd.
+catalyst	Catalyst Semiconductor, Inc.
+cavium	Cavium, Inc.
+cdns	Cadence Design Systems Inc.
+cdtech	CDTech(H.K.) Electronics Limited
+ceva	Ceva, Inc.
+chipidea	Chipidea, Inc
+chipone		ChipOne
+chipspark	ChipSPARK
+chrp	Common Hardware Reference Platform
+chunghwa	Chunghwa Picture Tubes Ltd.
+ciaa	Computadora Industrial Abierta Argentina
+cirrus	Cirrus Logic, Inc.
+cloudengines	Cloud Engines, Inc.
+cnm	Chips&Media, Inc.
+cnxt	Conexant Systems, Inc.
+compulab	CompuLab Ltd.
+cortina	Cortina Systems, Inc.
+cosmic	Cosmic Circuits
+crane	Crane Connectivity Solutions
+creative	Creative Technology Ltd
+crystalfontz	Crystalfontz America, Inc.
+csky	Hangzhou C-SKY Microsystems Co., Ltd
+cubietech	Cubietech, Ltd.
+cypress	Cypress Semiconductor Corporation
+cznic	CZ.NIC, z.s.p.o.
+dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
+dataimage	DataImage, Inc.
+davicom	DAVICOM Semiconductor, Inc.
+delta	Delta Electronics, Inc.
+denx	Denx Software Engineering
+devantech	Devantech, Ltd.
+dh	DH electronics GmbH
+digi	Digi International Inc.
+digilent	Diglent, Inc.
+dioo	Dioo Microcircuit Co., Ltd
+dlc	DLC Display Co., Ltd.
+dlg	Dialog Semiconductor
+dlink	D-Link Corporation
+dmo	Data Modul AG
+domintech	Domintech Co., Ltd.
+dongwoon	Dongwoon Anatech
+dptechnics	DPTechnics
+dragino	Dragino Technology Co., Limited
+ea	Embedded Artists AB
+ebs-systart EBS-SYSTART GmbH
+ebv	EBV Elektronik
+eckelmann	Eckelmann AG
+edt	Emerging Display Technologies
+eeti	eGalax_eMPIA Technology Inc
+elan	Elan Microelectronic Corp.
+elgin	Elgin S/A.
+embest	Shenzhen Embest Technology Co., Ltd.
+emlid	Emlid, Ltd.
+emmicro	EM Microelectronic
+emtrion	emtrion GmbH
+endless	Endless Mobile, Inc.
+energymicro	Silicon Laboratories (formerly Energy Micro AS)
+engicam	Engicam S.r.l.
+epcos	EPCOS AG
+epfl	Ecole Polytechnique Fédérale de Lausanne
+epson	Seiko Epson Corp.
+est	ESTeem Wireless Modems
+ettus	NI Ettus Research
+eukrea  Eukréa Electromatique
+everest	Everest Semiconductor Co. Ltd.
+everspin	Everspin Technologies, Inc.
+exar	Exar Corporation
+excito	Excito
+ezchip	EZchip Semiconductor
+facebook	Facebook
+fairphone	Fairphone B.V.
+faraday	Faraday Technology Corporation
+fastrax	Fastrax Oy
+fcs	Fairchild Semiconductor
+feiyang	Shenzhen Fly Young Technology Co.,LTD.
+firefly	Firefly
+focaltech	FocalTech Systems Co.,Ltd
+friendlyarm	Guangzhou FriendlyARM Computer Tech Co., Ltd
+fsl	Freescale Semiconductor
+fujitsu	Fujitsu Ltd.
+gateworks	Gateworks Corporation
+gcw Game Consoles Worldwide
+ge	General Electric Company
+geekbuying	GeekBuying
+gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+geniatech	Geniatech, Inc.
+giantec	Giantec Semiconductor, Inc.
+giantplus	Giantplus Technology Co., Ltd.
+globalscale	Globalscale Technologies, Inc.
+globaltop	GlobalTop Technology, Inc.
+gmt	Global Mixed-mode Technology, Inc.
+goodix	Shenzhen Huiding Technology Co., Ltd.
+google	Google, Inc.
+grinn	Grinn
+grmn	Garmin Limited
+gumstix	Gumstix, Inc.
+gw	Gateworks Corporation
+hannstar	HannStar Display Corporation
+haoyu	Haoyu Microelectronic Co. Ltd.
+hardkernel	Hardkernel Co., Ltd
+hideep	HiDeep Inc.
+himax	Himax Technologies, Inc.
+hisilicon	Hisilicon Limited.
+hit	Hitachi Ltd.
+hitex	Hitex Development Tools
+holt	Holt Integrated Circuits, Inc.
+honeywell	Honeywell
+hp	Hewlett Packard
+holtek	Holtek Semiconductor, Inc.
+hwacom	HwaCom Systems Inc.
+i2se	I2SE GmbH
+ibm	International Business Machines (IBM)
+icplus	IC Plus Corp.
+idt	Integrated Device Technologies, Inc.
+ifi	Ingenieurburo Fur Ic-Technologie (I/F/I)
+ilitek	ILI Technology Corporation (ILITEK)
+img	Imagination Technologies Ltd.
+infineon Infineon Technologies
+inforce	Inforce Computing
+ingenic	Ingenic Semiconductor
+innolux	Innolux Corporation
+inside-secure	INSIDE Secure
+intel	Intel Corporation
+intercontrol	Inter Control Group
+invensense	InvenSense Inc.
+inversepath	Inverse Path
+iom	Iomega Corporation
+isee	ISEE 2007 S.L.
+isil	Intersil
+issi	Integrated Silicon Solutions Inc.
+itead	ITEAD Intelligent Systems Co.Ltd
+iwave  iWave Systems Technologies Pvt. Ltd.
+jdi	Japan Display Inc.
+jedec	JEDEC Solid State Technology Association
+jianda	Jiandangjing Technology Co., Ltd.
+karo	Ka-Ro electronics GmbH
+keithkoep	Keith & Koep GmbH
+keymile	Keymile GmbH
+khadas	Khadas
+kiebackpeter    Kieback & Peter GmbH
+kinetic Kinetic Technologies
+kingdisplay	King & Display Technology Co., Ltd.
+kingnovel	Kingnovel Technology Co., Ltd.
+koe	Kaohsiung Opto-Electronics Inc.
+kosagi	Sutajio Ko-Usagi PTE Ltd.
+kyo	Kyocera Corporation
+lacie	LaCie
+laird	Laird PLC
+lantiq	Lantiq Semiconductor
+lattice	Lattice Semiconductor
+lego	LEGO Systems A/S
+lemaker	Shenzhen LeMaker Technology Co., Ltd.
+lenovo	Lenovo Group Ltd.
+lg	LG Corporation
+libretech	Shenzhen Libre Technology Co., Ltd
+licheepi	Lichee Pi
+linaro	Linaro Limited
+linksys	Belkin International, Inc. (Linksys)
+linux	Linux-specific binding
+linx	Linx Technologies
+lltc	Linear Technology Corporation
+logicpd	Logic PD, Inc.
+lsi	LSI Corp. (LSI Logic)
+lwn	Liebherr-Werk Nenzing GmbH
+macnica	Macnica Americas
+marvell	Marvell Technology Group Ltd.
+maxim	Maxim Integrated Products
+mbvl	Mobiveil Inc.
+mcube	mCube
+meas	Measurement Specialties
+mediatek	MediaTek Inc.
+megachips	MegaChips
+mele	Shenzhen MeLE Digital Technology Ltd.
+melexis	Melexis N.V.
+melfas	MELFAS Inc.
+mellanox	Mellanox Technologies
+memsic	MEMSIC Inc.
+merrii	Merrii Technology Co., Ltd.
+micrel	Micrel Inc.
+microchip	Microchip Technology Inc.
+microcrystal	Micro Crystal AG
+micron	Micron Technology Inc.
+mikroe		MikroElektronika d.o.o.
+minix	MINIX Technology Ltd.
+miramems	MiraMEMS Sensing Technology Co., Ltd.
+mitsubishi	Mitsubishi Electric Corporation
+mosaixtech	Mosaix Technologies, Inc.
+motorola	Motorola, Inc.
+moxa	Moxa Inc.
+mpl	MPL AG
+mqmaker	mqmaker Inc.
+mscc	Microsemi Corporation
+msi	Micro-Star International Co. Ltd.
+mti	Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
+multi-inno	Multi-Inno Technology Co.,Ltd
+mundoreader	Mundo Reader S.L.
+murata	Murata Manufacturing Co., Ltd.
+mxicy	Macronix International Co., Ltd.
+myir	MYIR Tech Limited
+national	National Semiconductor
+nec	NEC LCD Technologies, Ltd.
+neonode		Neonode Inc.
+netgear	NETGEAR
+netlogic	Broadcom Corporation (formerly NetLogic Microsystems)
+netron-dy	Netron DY
+netxeon		Shenzhen Netxeon Technology CO., LTD
+nexbox	Nexbox
+nextthing	Next Thing Co.
+newhaven	Newhaven Display International
+ni	National Instruments
+nintendo	Nintendo
+nlt	NLT Technologies, Ltd.
+nokia	Nokia
+nordic	Nordic Semiconductor
+novtech NovTech, Inc.
+nutsboard	NutsBoard
+nuvoton	Nuvoton Technology Corporation
+nvd	New Vision Display
+nvidia	NVIDIA
+nxp	NXP Semiconductors
+okaya	Okaya Electric America, Inc.
+oki	Oki Electric Industry Co., Ltd.
+olimex	OLIMEX Ltd.
+olpc	One Laptop Per Child
+onion	Onion Corporation
+onnn	ON Semiconductor Corp.
+ontat	On Tat Industrial Company
+opalkelly	Opal Kelly Incorporated
+opencores	OpenCores.org
+openrisc	OpenRISC.io
+option	Option NV
+oranth	Shenzhen Oranth Technology Co., Ltd.
+ORCL	Oracle Corporation
+orisetech	Orise Technology
+ortustech	Ortus Technology Co., Ltd.
+ovti	OmniVision Technologies
+oxsemi	Oxford Semiconductor, Ltd.
+panasonic	Panasonic Corporation
+parade	Parade Technologies Inc.
+pda	Precision Design Associates, Inc.
+pericom	Pericom Technology Inc.
+pervasive	Pervasive Displays, Inc.
+phicomm PHICOMM Co., Ltd.
+phytec	PHYTEC Messtechnik GmbH
+picochip	Picochip Ltd
+pine64	Pine64
+pixcir  PIXCIR MICROELECTRONICS Co., Ltd
+plantower Plantower Co., Ltd
+plathome	Plat'Home Co., Ltd.
+plda	PLDA
+plx	Broadcom Corporation (formerly PLX Technology)
+pni	PNI Sensor Corporation
+portwell	Portwell Inc.
+poslab	Poslab Technology Co., Ltd.
+powervr	PowerVR (deprecated, use img)
+probox2	PROBOX2 (by W2COMP Co., Ltd.)
+pulsedlight	PulsedLight, Inc
+qca	Qualcomm Atheros, Inc.
+qcom	Qualcomm Technologies, Inc
+qemu	QEMU, a generic and open source machine emulator and virtualizer
+qi	Qi Hardware
+qiaodian	QiaoDian XianShi Corporation
+qnap	QNAP Systems, Inc.
+radxa	Radxa
+raidsonic	RaidSonic Technology GmbH
+ralink	Mediatek/Ralink Technology Corp.
+ramtron	Ramtron International
+raspberrypi	Raspberry Pi Foundation
+raydium	Raydium Semiconductor Corp.
+rda	Unisoc Communications, Inc.
+realtek Realtek Semiconductor Corp.
+renesas	Renesas Electronics Corporation
+richtek	Richtek Technology Corporation
+ricoh	Ricoh Co. Ltd.
+rikomagic	Rikomagic Tech Corp. Ltd
+riscv	RISC-V Foundation
+rockchip	Fuzhou Rockchip Electronics Co., Ltd
+rohm	ROHM Semiconductor Co., Ltd
+roofull	Shenzhen Roofull Technology Co, Ltd
+samsung	Samsung Semiconductor
+samtec	Samtec/Softing company
+sancloud	Sancloud Ltd
+sandisk	Sandisk Corporation
+sbs	Smart Battery System
+schindler	Schindler
+seagate	Seagate Technology PLC
+semtech	Semtech Corporation
+sensirion	Sensirion AG
+sff	Small Form Factor Committee
+sgd	Solomon Goldentek Display Corporation
+sgx	SGX Sensortech
+sharp	Sharp Corporation
+shimafuji	Shimafuji Electric, Inc.
+si-en	Si-En Technology Ltd.
+sifive	SiFive, Inc.
+sigma	Sigma Designs, Inc.
+sii	Seiko Instruments, Inc.
+sil	Silicon Image
+silabs	Silicon Laboratories
+silead	Silead Inc.
+silergy	Silergy Corp.
+siliconmitus	Silicon Mitus, Inc.
+simtek
+sirf	SiRF Technology, Inc.
+sis	Silicon Integrated Systems Corp.
+sitronix	Sitronix Technology Corporation
+skyworks	Skyworks Solutions, Inc.
+smsc	Standard Microsystems Corporation
+snps	Synopsys, Inc.
+socionext	Socionext Inc.
+solidrun	SolidRun
+solomon        Solomon Systech Limited
+sony	Sony Corporation
+spansion	Spansion Inc.
+sprd	Spreadtrum Communications Inc.
+sst	Silicon Storage Technology, Inc.
+st	STMicroelectronics
+starry	Starry Electronic Technology (ShenZhen) Co., LTD
+startek	Startek
+ste	ST-Ericsson
+stericsson	ST-Ericsson
+summit	Summit microelectronics
+sunchip	Shenzhen Sunchip Technology Co., Ltd
+SUNW	Sun Microsystems, Inc
+swir	Sierra Wireless
+syna	Synaptics Inc.
+synology	Synology, Inc.
+tbs	TBS Technologies
+tbs-biometrics	Touchless Biometric Systems AG
+tcg	Trusted Computing Group
+tcl	Toby Churchill Ltd.
+technexion	TechNexion
+technologic	Technologic Systems
+tempo	Tempo Semiconductor
+techstar	Shenzhen Techstar Electronics Co., Ltd.
+terasic	Terasic Inc.
+thine	THine Electronics, Inc.
+ti	Texas Instruments
+tianma	Tianma Micro-electronics Co., Ltd.
+tlm	Trusted Logic Mobility
+tmt	Tecon Microprocessor Technologies, LLC.
+topeet  Topeet
+toradex	Toradex AG
+toshiba	Toshiba Corporation
+toumaz	Toumaz
+tpk	TPK U.S.A. LLC
+tplink	TP-LINK Technologies Co., Ltd.
+tpo	TPO
+tronfy	Tronfy
+tronsmart	Tronsmart
+truly	Truly Semiconductors Limited
+tsd	Theobroma Systems Design und Consulting GmbH
+tyan	Tyan Computer Corporation
+u-blox	u-blox
+ucrobotics	uCRobotics
+ubnt	Ubiquiti Networks
+udoo	Udoo
+uniwest	United Western Technologies Corp (UniWest)
+upisemi	uPI Semiconductor Corp.
+urt	United Radiant Technology Corporation
+usi	Universal Scientific Industrial Co., Ltd.
+v3	V3 Semiconductor
+vamrs	Vamrs Ltd.
+variscite	Variscite Ltd.
+via	VIA Technologies, Inc.
+virtio	Virtual I/O Device Specification, developed by the OASIS consortium
+vishay	Vishay Intertechnology, Inc
+vitesse	Vitesse Semiconductor Corporation
+vivante	Vivante Corporation
+vocore VoCore Studio
+voipac	Voipac Technologies s.r.o.
+vot	Vision Optical Technology Co., Ltd.
+wd	Western Digital Corp.
+wetek	WeTek Electronics, limited.
+wexler	Wexler
+whwave  Shenzhen whwave Electronics, Inc.
+wi2wi	Wi2Wi, Inc.
+winbond Winbond Electronics corp.
+winstar	Winstar Display Corp.
+wlf	Wolfson Microelectronics
+wm	Wondermedia Technologies, Inc.
+x-powers	X-Powers
+xes	Extreme Engineering Solutions (X-ES)
+xillybus	Xillybus Ltd.
+xlnx	Xilinx
+xunlong	Shenzhen Xunlong Software CO.,Limited
+ysoft	Y Soft Corporation a.s.
+zarlink	Zarlink Semiconductor
+zeitec	ZEITEC Semiconductor Co., LTD.
+zidoo	Shenzhen Zidoo Technology Co., Ltd.
+zii	Zodiac Inflight Innovations
+zte	ZTE Corp.
+zyxel	ZyXEL Communications Corp.

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -137,6 +137,8 @@ patternProperties:
     description: Beckhoff Automation GmbH & Co. KG
   "^bitmain,.*":
     description: Bitmain Technologies
+  "^blokaslabs,.*":
+    description: Vilniaus Blokas UAB
   "^boe,.*":
     description: BOE Technology Group Co., Ltd.
   "^bosch,.*":

Documentation/devicetree/configfs-overlays.txt

@@ -0,0 +1,31 @@
+Howto use the configfs overlay interface.
+
+A device-tree configfs entry is created in /config/device-tree/overlays
+and and it is manipulated using standard file system I/O.
+Note that this is a debug level interface, for use by developers and
+not necessarily something accessed by normal users due to the
+security implications of having direct access to the kernel's device tree.
+
+* To create an overlay you mkdir the directory:
+
+	# mkdir /config/device-tree/overlays/foo
+
+* Either you echo the overlay firmware file to the path property file.
+
+	# echo foo.dtbo >/config/device-tree/overlays/foo/path
+
+* Or you cat the contents of the overlay to the dtbo file
+
+	# cat foo.dtbo >/config/device-tree/overlays/foo/dtbo
+
+The overlay file will be applied, and devices will be created/destroyed
+as required.
+
+To remove it simply rmdir the directory.
+
+	# rmdir /config/device-tree/overlays/foo
+
+The rationalle of the dual interface (firmware & direct copy) is that each is
+better suited to different use patterns. The firmware interface is what's
+intended to be used by hardware managers in the kernel, while the copy interface
+make sense for developers (since it avoids problems with namespaces).

Documentation/fb/modedb.txt

@@ -51,6 +51,20 @@ To force the VGA output to be enabled and drive a specific mode say:
 Specifying the option multiple times for different ports is possible, e.g.:
     video=LVDS-1:d video=HDMI-1:D
 
+Options can also be passed after the mode, using commas as separator.
+
+       Sample usage: 720x480,rotate=180 - 720x480 mode, rotated by 180 degrees
+
+Valid options are:
+
+  - margin_top, margin_bottom, margin_left, margin_right (integer):
+    Number of pixels in the margins, typically to deal with overscan on TVs
+  - reflect_x (boolean): Perform an axial symmetry on the X axis
+  - reflect_y (boolean): Perform an axial symmetry on the Y axis
+  - rotate (integer): Rotate the initial framebuffer by x
+    degrees. Valid values are 0, 90, 180 and 270.
+
+
 ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo *****
 
 What is the VESA(TM) Coordinated Video Timings (CVT)?

Documentation/filesystems/overlayfs.txt

@@ -302,7 +302,7 @@ beneath or above the path of another overlay lower layer path.
 
 Using an upper layer path and/or a workdir path that are already used by
 another overlay mount is not allowed and may fail with EBUSY.  Using
-partially overlapping paths is not allowed but will not fail with EBUSY.
+partially overlapping paths is not allowed and may fail with EBUSY.
 If files are accessed from two overlayfs mounts which share or overlap the
 upper layer and/or workdir path the behavior of the overlay is undefined,
 though it will not result in a crash or deadlock.

Documentation/hwmon/rpi-poe-fan

@@ -0,0 +1,15 @@
+Kernel driver rpi-poe-fan
+=====================
+
+This driver enables the use of the Raspberry Pi PoE HAT fan.
+
+Author: Serge Schneider <serge@raspberrypi.org>
+
+Description
+-----------
+
+The driver implements a simple interface for driving the Raspberry Pi PoE
+(Power over Ethernet) HAT fan. The driver passes commands to the Raspberry Pi
+firmware through the mailbox property interface. The firmware then forwards
+the commands to the board over I2C on the ID_EEPROM pins. The driver exposes
+the fan to the user space through the hwmon sysfs interface.

Documentation/networking/tls-offload.rst

@@ -445,24 +445,6 @@ These flags will be acted upon accordingly by the core ``ktls`` code.
 TLS device feature flags only control adding of new TLS connection
 offloads, old connections will remain active after flags are cleared.
 
-Known bugs
-==========
-
-skb_orphan() leaks clear text
------------------------------
-
-Currently drivers depend on the :c:member:`sk` member of
-:c:type:`struct sk_buff <sk_buff>` to identify segments requiring
-encryption. Any operation which removes or does not preserve the socket
-association such as :c:func:`skb_orphan` or :c:func:`skb_clone`
-will cause the driver to miss the packets and lead to clear text leaks.
-
-Redirects leak clear text
--------------------------
-
-In the RX direction, if segment has already been decrypted by the device
-and it gets redirected or mirrored - clear text will be transmitted out.
-
 .. _pre_tls_data:
 
 Transmission of pre-TLS data

Documentation/scheduler/sched-pelt.c

@@ -20,7 +20,8 @@ void calc_runnable_avg_yN_inv(void)
 	int i;
 	unsigned int x;
 
-	printf("static const u32 runnable_avg_yN_inv[] = {");
+	/* To silence -Wunused-but-set-variable warnings. */
+	printf("static const u32 runnable_avg_yN_inv[] __maybe_unused = {");
 	for (i = 0; i < HALFLIFE; i++) {
 		x = ((1UL<<32)-1)*pow(y, i);
 

Documentation/sound/hd-audio/models.rst

@@ -260,6 +260,9 @@ alc295-hp-x360
     HP Spectre X360 fixups
 alc-sense-combo
     Headset button support for Chrome platform
+huawei-mbx-stereo
+    Enable initialization verbs for Huawei MBX stereo speakers;
+    might be risky, try this at your own risk
 
 ALC66x/67x/892
 ==============

Documentation/userspace-api/spec_ctrl.rst

@@ -49,6 +49,8 @@ If PR_SPEC_PRCTL is set, then the per-task control of the mitigation is
 available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
 misfeature will fail.
 
+.. _set_spec_ctrl:
+
 PR_SET_SPECULATION_CTRL
 -----------------------
 

Documentation/vm/hmm.rst

@@ -231,7 +231,7 @@ respect in order to keep things properly synchronized. The usage pattern is::
       ret = hmm_range_snapshot(&range);
       if (ret) {
           up_read(&mm->mmap_sem);
-          if (ret == -EAGAIN) {
+          if (ret == -EBUSY) {
             /*
              * No need to check hmm_range_wait_until_valid() return value
              * on retry we will get proper error with hmm_range_snapshot()

MAINTAINERS

@@ -3130,6 +3130,13 @@ S:	Maintained
 N:	bcm2835
 F:	drivers/staging/vc04_services
 
+BROADCOM BCM2835 CAMERA DRIVER
+M:	Dave Stevenson <dave.stevenson@raspberrypi.org>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/platform/bcm2835/
+F:	Documentation/devicetree/bindings/media/bcm2835-unicam.txt
+
 BROADCOM BCM47XX MIPS ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 2
-SUBLEVEL = 0
+SUBLEVEL = 21
 EXTRAVERSION =
 NAME = Bobtail Squid
 
@@ -467,6 +467,7 @@ KBUILD_CFLAGS_MODULE  := -DMODULE
 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
 KBUILD_LDFLAGS :=
 GCC_PLUGINS_CFLAGS :=
+CLANG_FLAGS :=
 
 export ARCH SRCARCH CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
 export CPP AR NM STRIP OBJCOPY OBJDUMP PAHOLE KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
@@ -519,7 +520,7 @@ endif
 
 ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),)
 ifneq ($(CROSS_COMPILE),)
-CLANG_FLAGS	:= --target=$(notdir $(CROSS_COMPILE:%-=%))
+CLANG_FLAGS	+= --target=$(notdir $(CROSS_COMPILE:%-=%))
 GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)elfedit))
 CLANG_FLAGS	+= --prefix=$(GCC_TOOLCHAIN_DIR)
 GCC_TOOLCHAIN	:= $(realpath $(GCC_TOOLCHAIN_DIR)/..)
@@ -528,6 +529,7 @@ ifneq ($(GCC_TOOLCHAIN),)
 CLANG_FLAGS	+= --gcc-toolchain=$(GCC_TOOLCHAIN)
 endif
 CLANG_FLAGS	+= -no-integrated-as
+CLANG_FLAGS	+= -Werror=unknown-warning-option
 KBUILD_CFLAGS	+= $(CLANG_FLAGS)
 KBUILD_AFLAGS	+= $(CLANG_FLAGS)
 export CLANG_FLAGS
@@ -1244,6 +1246,9 @@ ifneq ($(dtstree),)
 %.dtb: prepare3 scripts_dtc
 	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
 
+%.dtbo: prepare3 scripts_dtc
+	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
+
 PHONY += dtbs dtbs_install dt_binding_check
 dtbs dtbs_check: prepare3 scripts_dtc
 	$(Q)$(MAKE) $(build)=$(dtstree)

arch/arc/kernel/unwind.c

@@ -181,11 +181,6 @@ static void *__init unw_hdr_alloc_early(unsigned long sz)
 	return memblock_alloc_from(sz, sizeof(unsigned int), MAX_DMA_ADDRESS);
 }
 
-static void *unw_hdr_alloc(unsigned long sz)
-{
-	return kmalloc(sz, GFP_KERNEL);
-}
-
 static void init_unwind_table(struct unwind_table *table, const char *name,
 			      const void *core_start, unsigned long core_size,
 			      const void *init_start, unsigned long init_size,
@@ -366,6 +361,10 @@ ret_err:
 }
 
 #ifdef CONFIG_MODULES
+static void *unw_hdr_alloc(unsigned long sz)
+{
+	return kmalloc(sz, GFP_KERNEL);
+}
 
 static struct unwind_table *last_table;
 

arch/arm/Kconfig

@@ -75,7 +75,7 @@ config ARM
 	select HAVE_EXIT_THREAD
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
-	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
+	select HAVE_FUNCTION_TRACER if !XIP_KERNEL && (CC_IS_GCC || CLANG_VERSION >= 100000)
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IDE if PCI || ISA || PCMCIA
@@ -1545,8 +1545,9 @@ config ARM_PATCH_IDIV
 	  code to do integer division.
 
 config AEABI
-	bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && !CPU_V7M && !CPU_V6 && !CPU_V6K
-	default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K
+	bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && \
+		!CPU_V7M && !CPU_V6 && !CPU_V6K && !CC_IS_CLANG
+	default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K || CC_IS_CLANG
 	help
 	  This option allows for the kernel to be compiled using the latest
 	  ARM ABI (aka EABI).  This is only useful if you are using a user

arch/arm/Makefile

@@ -112,6 +112,10 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
+ifeq ($(CONFIG_CC_IS_CLANG),y)
+CFLAGS_ABI	+= -meabi gnu
+endif
+
 # Accept old syntax despite ".syntax unified"
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 

arch/arm/boot/dts/Makefile

@@ -1,4 +1,18 @@
 # SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_BCM2835) += \
+	bcm2708-rpi-b.dtb \
+	bcm2708-rpi-b-plus.dtb \
+	bcm2708-rpi-cm.dtb \
+	bcm2708-rpi-zero.dtb \
+	bcm2708-rpi-zero-w.dtb \
+	bcm2709-rpi-2-b.dtb \
+	bcm2710-rpi-2-b.dtb \
+	bcm2710-rpi-3-b.dtb \
+	bcm2711-rpi-4-b.dtb \
+	bcm2710-rpi-3-b-plus.dtb \
+	bcm2710-rpi-cm3.dtb
+
 dtb-$(CONFIG_ARCH_ALPINE) += \
 	alpine-db.dtb
 dtb-$(CONFIG_MACH_ARTPEC6) += \
@@ -83,6 +97,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2837-rpi-3-b.dtb \
 	bcm2837-rpi-3-b-plus.dtb \
 	bcm2837-rpi-cm3-io3.dtb \
+	bcm2838-rpi-4-b.dtb \
 	bcm2835-rpi-zero.dtb \
 	bcm2835-rpi-zero-w.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -1276,3 +1291,13 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-opp-zaius.dtb \
 	aspeed-bmc-portwell-neptune.dtb \
 	aspeed-bmc-quanta-q71l.dtb
+
+targets += dtbs dtbs_install
+targets += $(dtb-y)
+
+subdir-y	:= overlays
+
+# Enable fixups to support overlays on BCM2835 platforms
+ifeq ($(CONFIG_ARCH_BCM2835),y)
+	DTC_FLAGS ?= -@
+endif

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -185,7 +185,7 @@
 			uart0: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <72>;
 				status = "disabled";
 				dmas = <&edma 26 0>, <&edma 27 0>;
@@ -934,7 +934,7 @@
 			uart1: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <73>;
 				status = "disabled";
 				dmas = <&edma 28 0>, <&edma 29 0>;
@@ -966,7 +966,7 @@
 			uart2: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <74>;
 				status = "disabled";
 				dmas = <&edma 30 0>, <&edma 31 0>;
@@ -1614,7 +1614,7 @@
 			uart3: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <44>;
 				status = "disabled";
 			};
@@ -1644,7 +1644,7 @@
 			uart4: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <45>;
 				status = "disabled";
 			};
@@ -1674,7 +1674,7 @@
 			uart5: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <46>;
 				status = "disabled";
 			};
@@ -1758,6 +1758,8 @@
 
 		target-module@cc000 {			/* 0x481cc000, ap 60 46.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xcc020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
@@ -1780,6 +1782,8 @@
 
 		target-module@d0000 {			/* 0x481d0000, ap 62 42.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd0020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,

arch/arm/boot/dts/am33xx.dtsi

@@ -234,13 +234,33 @@
 			interrupt-names = "edma3_tcerrint";
 		};
 
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
+		target-module@47810000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <29>;
-			reg = <0x47810000 0x1000>;
-			status = "disabled";
+			reg = <0x478102fc 0x4>,
+			      <0x47810110 0x4>,
+			      <0x47810114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x47810000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				ti,needs-special-reset;
+				interrupts = <29>;
+				reg = <0x0 0x1000>;
+			};
 		};
 
 		usb: usb@47400000 {

arch/arm/boot/dts/am3517-evm.dts

@@ -124,10 +124,11 @@
 	};
 
 	lcd0: display@0 {
-		compatible = "panel-dpi";
+		/* This isn't the exact LCD, but the timings meet spec */
+		/* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
 		label = "15";
-		status = "okay";
-		pinctrl-names = "default";
+		backlight = <&bl>;
 		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;	/* gpio176, lcd INI */
 		vcc-supply = <&vdd_io_reg>;
 
@@ -136,22 +137,6 @@
 				remote-endpoint = <&dpi_out>;
 			};
 		};
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <3>;
-			hback-porch = <2>;
-			hsync-len = <42>;
-			vback-porch = <3>;
-			vfront-porch = <4>;
-			vsync-len = <11>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
 	};
 
 	bl: backlight {

arch/arm/boot/dts/am4372.dtsi

@@ -228,13 +228,33 @@
 			interrupt-names = "edma3_tcerrint";
 		};
 
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x47810000 0x1000>;
+		target-module@47810000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
+			reg = <0x478102fc 0x4>,
+			      <0x47810110 0x4>,
+			      <0x47810114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x47810000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				ti,needs-special-reset;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1000>;
+			};
 		};
 
 		sham: sham@53100000 {

arch/arm/boot/dts/am437x-l4.dtsi

@@ -1574,6 +1574,8 @@
 
 		target-module@cc000 {			/* 0x481cc000, ap 50 46.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xcc020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
@@ -1593,6 +1595,8 @@
 
 		target-module@d0000 {			/* 0x481d0000, ap 52 3a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd0020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;

arch/arm/boot/dts/am571x-idk.dts

@@ -175,14 +175,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 };
 
 &mmc2 {

arch/arm/boot/dts/am572x-idk.dts

@@ -16,14 +16,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 };
 
 &mmc2 {

arch/arm/boot/dts/am574x-idk.dts

@@ -24,14 +24,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_default>;
-	pinctrl-3 = <&mmc1_pins_hs>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>;
-	pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>;
 };
 
 &mmc2 {

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

@@ -379,7 +379,7 @@
 	};
 };
 
-&gpio7 {
+&gpio7_target {
 	ti,no-reset-on-init;
 	ti,no-idle-on-init;
 };
@@ -430,6 +430,7 @@
 
 	bus-width = <4>;
 	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+	no-1-8-v;
 };
 
 &mmc2 {

arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts

@@ -16,14 +16,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
 	vmmc-supply = <&vdd_3v3>;
 	vqmmc-supply = <&ldo1_reg>;
 };

arch/arm/boot/dts/am57xx-beagle-x15-revc.dts

@@ -16,14 +16,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 	vmmc-supply = <&vdd_3v3>;
 	vqmmc-supply = <&ldo1_reg>;
 };

arch/arm/boot/dts/bcm2708-rpi-b-plus.dts

@@ -0,0 +1,125 @@
+/dts-v1/;
+
+#include "bcm2708.dtsi"
+#include "bcm2708-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model B+";
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <1>; /* output */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins = <40 45>;
+		brcm,function = <4>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 47 0>;
+	};
+
+	pwr_led: pwr {
+		label = "led1";
+		linux,default-trigger = "input";
+		gpios = <&gpio 35 0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		pwr_led_gpio = <&pwr_led>,"gpios:4";
+		pwr_led_activelow = <&pwr_led>,"gpios:8";
+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2708-rpi-b.dts

@@ -0,0 +1,115 @@
+/dts-v1/;
+
+#include "bcm2708.dtsi"
+#include "bcm2708-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b", "brcm,bcm2835";
+	model = "Raspberry Pi Model B";
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <1>; /* output */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <6>; /* alt2 */
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins = <40 45>;
+		brcm,function = <4>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 16 1>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2708-rpi-cm.dts

@@ -0,0 +1,98 @@
+/dts-v1/;
+
+#include "bcm2708-rpi-cm.dtsi"
+#include "bcm283x-rpi-csi0-2lane.dtsi"
+#include "bcm283x-rpi-csi1-4lane.dtsi"
+
+/ {
+	compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+	model = "Raspberry Pi Compute Module";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <1>; /* output */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins;
+		brcm,function;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+};

arch/arm/boot/dts/bcm2708-rpi-cm.dtsi

@@ -0,0 +1,18 @@
+#include "bcm2708.dtsi"
+#include "bcm2708-rpi.dtsi"
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 47 0>;
+	};
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2708-rpi-zero-w.dts

@@ -0,0 +1,163 @@
+/dts-v1/;
+
+#include "bcm2708.dtsi"
+#include "bcm2708-rpi.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+	model = "Raspberry Pi Zero W";
+
+	chosen {
+		bootargs = "coherent_pool=1M 8250.nr_uarts=1";
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		mmc1 = &mmcnr;
+	};
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <1>; /* output */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	sdio_pins: sdio_pins {
+		brcm,pins = <34 35 36 37 38 39>;
+		brcm,function = <7>; /* ALT3 = SD1 */
+		brcm,pull = <0 2 2 2 2 2>;
+	};
+
+	bt_pins: bt_pins {
+		brcm,pins = <43>;
+		brcm,function = <4>; /* alt0:GPCLK2 */
+		brcm,pull = <0>; /* none */
+	};
+
+	uart0_pins: uart0_pins {
+		brcm,pins = <30 31 32 33>;
+		brcm,function = <7>; /* alt3=UART0 */
+		brcm,pull = <2 0 0 2>; /* up none none up */
+	};
+
+	uart1_pins: uart1_pins {
+		brcm,pins;
+		brcm,function;
+		brcm,pull;
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins = <>;
+		brcm,function = <>;
+	};
+};
+
+&mmcnr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins &bt_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 47 0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2708-rpi-zero.dts

@@ -0,0 +1,118 @@
+/dts-v1/;
+
+#include "bcm2708.dtsi"
+#include "bcm2708-rpi.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
+	model = "Raspberry Pi Zero";
+
+	chosen {
+		bootargs = "coherent_pool=1M";
+	};
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <1>; /* output */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins = <>;
+		brcm,function = <>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 47 0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2708-rpi.dtsi

@@ -0,0 +1,154 @@
+/* Downstream modifications to bcm2835-rpi.dtsi */
+
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	aliases {
+		audio = &audio;
+		aux = &aux;
+		sound = &sound;
+		soc = &soc;
+		dma = &dma;
+		intc = &intc;
+		watchdog = &watchdog;
+		random = &random;
+		mailbox = &mailbox;
+		gpio = &gpio;
+		uart0 = &uart0;
+		sdhost = &sdhost;
+		mmc0 = &sdhost;
+		i2s = &i2s;
+		spi0 = &spi0;
+		i2c0 = &i2c0;
+		uart1 = &uart1;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		mmc = &mmc;
+		mmc1 = &mmc;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		usb = &usb;
+		leds = &leds;
+		fb = &fb;
+		thermal = &thermal;
+		axiperf = &axiperf;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+	};
+
+	soc {
+		gpiomem {
+			compatible = "brcm,bcm2835-gpiomem";
+			reg = <0x7e200000 0x1000>;
+		};
+
+		fb: fb {
+			compatible = "brcm,bcm2708-fb";
+			firmware = <&firmware>;
+			status = "okay";
+		};
+
+		vcsm: vcsm {
+			compatible = "raspberrypi,bcm2835-vcsm";
+			firmware = <&firmware>;
+			status = "okay";
+		};
+
+		/* Onboard audio */
+		audio: audio {
+			compatible = "brcm,bcm2835-audio";
+			brcm,pwm-channels = <8>;
+			status = "disabled";
+		};
+
+		/* External sound card */
+		sound: sound {
+			status = "disabled";
+		};
+	};
+
+	__overrides__ {
+		cache_line_size;
+
+		uart0 = <&uart0>,"status";
+		uart1 = <&uart1>,"status";
+		i2s = <&i2s>,"status";
+		spi = <&spi0>,"status";
+		i2c0 = <&i2c0>,"status";
+		i2c1 = <&i2c1>,"status";
+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
+
+		audio = <&audio>,"status";
+		watchdog = <&watchdog>,"status";
+		random = <&random>,"status";
+		sd_overclock = <&sdhost>,"brcm,overclock-50:0";
+		sd_force_pio = <&sdhost>,"brcm,force-pio?";
+		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
+		sd_debug     = <&sdhost>,"brcm,debug";
+		sdio_overclock = <&mmc>,"brcm,overclock-50:0",
+				 <&mmcnr>,"brcm,overclock-50:0";
+		axiperf      = <&axiperf>,"status";
+	};
+};
+
+&hdmi {
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "disabled";
+};
+
+&txp {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&clocks {
+	firmware = <&firmware>;
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio48>;
+	bus-width = <4>;
+};
+
+sdhost_pins: &sdhost_gpio48 {
+	/* Add alias */
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	brcm,overclock-50 = <0>;
+	brcm,pio-limit = <1>;
+	status = "okay";
+};
+
+&cpu_thermal {
+	/delete-node/ trips;
+};
+
+&vec {
+	status = "disabled";
+};

arch/arm/boot/dts/bcm2708.dtsi

@@ -0,0 +1,10 @@
+#include "bcm2835.dtsi"
+#include "bcm270x.dtsi"
+
+/ {
+	/delete-node/ cpus;
+
+	__overrides__ {
+		arm_freq;
+	};
+};

arch/arm/boot/dts/bcm2709-rpi-2-b.dts

@@ -0,0 +1,125 @@
+/dts-v1/;
+
+#include "bcm2709.dtsi"
+#include "bcm2709-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+	model = "Raspberry Pi 2 Model B";
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <1>; /* output */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins = <40 45>;
+		brcm,function = <4>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 47 0>;
+	};
+
+	pwr_led: pwr {
+		label = "led1";
+		linux,default-trigger = "input";
+		gpios = <&gpio 35 0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		pwr_led_gpio = <&pwr_led>,"gpios:4";
+		pwr_led_activelow = <&pwr_led>,"gpios:8";
+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2709-rpi.dtsi

@@ -0,0 +1,5 @@
+#include "bcm2708-rpi.dtsi"
+
+&vchiq {
+	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
+};

arch/arm/boot/dts/bcm2709.dtsi

@@ -0,0 +1,18 @@
+#include "bcm2836.dtsi"
+#include "bcm270x.dtsi"
+
+/ {
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x01000000>,
+		         <0x40000000 0x40000000 0x00040000>;
+
+		/delete-node/ timer@7e003000;
+	};
+
+	__overrides__ {
+		arm_freq = <&v7_cpu0>, "clock-frequency:0",
+			   <&v7_cpu1>, "clock-frequency:0",
+			   <&v7_cpu2>, "clock-frequency:0",
+			   <&v7_cpu3>, "clock-frequency:0";
+	};
+};

arch/arm/boot/dts/bcm270x.dtsi

@@ -0,0 +1,165 @@
+/* Downstream bcm283x.dtsi diff */
+#include <dt-bindings/power/raspberrypi-power.h>
+
+/ {
+	chosen {
+		bootargs = "coherent_pool=1M";
+		/delete-property/ stdout-path;
+	};
+
+	soc: soc {
+
+		watchdog: watchdog@7e100000 {
+			/* Add label */
+		};
+
+		random: rng@7e104000 {
+			/* Add label */
+		};
+
+		gpio@7e200000 { /* gpio */
+			interrupts = <2 17>, <2 18>;
+
+			dpi_18bit_gpio0: dpi_18bit_gpio0 {
+				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
+					     12 13 14 15 16 17 18 19
+					     20 21>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+		};
+
+		serial@7e201000 { /* uart0 */
+			/* Enable CTS bug workaround */
+			cts-event-workaround;
+		};
+
+		i2s@7e203000 { /* i2s */
+			#sound-dai-cells = <0>;
+			reg = <0x7e203000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_PCM>;
+		};
+
+		spi0: spi@7e204000 {
+			/* Add label */
+			dmas = <&dma 6>, <&dma 7>;
+			dma-names = "tx", "rx";
+		};
+
+		pixelvalve0: pixelvalve@7e206000 {
+			/* Add label */
+			status = "disabled";
+		};
+
+		pixelvalve1: pixelvalve@7e207000 {
+			/* Add label */
+			status = "disabled";
+		};
+
+		dpi: dpi@7e208000 {
+			compatible = "brcm,bcm2835-dpi";
+			reg = <0x7e208000 0x8c>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>,
+				 <&clocks BCM2835_CLOCK_DPI>;
+			clock-names = "core", "pixel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		/delete-node/ sdhci@7e300000;
+
+		sdhci: mmc: mmc@7e300000 {
+			compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
+			dmas = <&dma 11>;
+			dma-names = "rx-tx";
+			brcm,overclock-50 = <0>;
+			status = "disabled";
+		};
+
+		/* A clone of mmc but with non-removable set */
+		mmcnr: mmcnr@7e300000 {
+			compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
+			dmas = <&dma 11>;
+			dma-names = "rx-tx";
+			brcm,overclock-50 = <0>;
+			non-removable;
+			status = "disabled";
+		};
+
+		hvs: hvs@7e400000 {
+			/* Add label */
+			status = "disabled";
+		};
+
+		firmwarekms: firmwarekms@7e600000 {
+			compatible = "raspberrypi,rpi-firmware-kms";
+			/* SMI interrupt reg */
+			reg = <0x7e600000 0x100>;
+			interrupts = <2 16>;
+			brcm,firmware = <&firmware>;
+			status = "disabled";
+		};
+
+		smi: smi@7e600000 {
+			compatible = "brcm,bcm2835-smi";
+			reg = <0x7e600000 0x100>;
+			interrupts = <2 16>;
+			clocks = <&clocks BCM2835_CLOCK_SMI>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_SMI>;
+			assigned-clock-rates = <125000000>;
+			dmas = <&dma 4>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		pixelvalve2: pixelvalve@7e807000 {
+			/* Add label */
+			status = "disabled";
+		};
+
+		hdmi@7e902000 { /* hdmi */
+			status = "disabled";
+		};
+
+		usb@7e980000 { /* usb */
+			compatible = "brcm,bcm2708-usb";
+			reg = <0x7e980000 0x10000>,
+			      <0x7e006000 0x1000>;
+			interrupt-names = "usb",
+					  "soft";
+			interrupts = <1 9>,
+				     <2 0>;
+		};
+
+		v3d@7ec00000 { /* vd3 */
+			compatible = "brcm,vc4-v3d";
+			power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+			status = "disabled";
+		};
+
+		axiperf: axiperf {
+			compatible = "brcm,bcm2835-axiperf";
+			reg = <0x7e009800 0x100>,
+			      <0x7ee08000 0x100>;
+			firmware = <&firmware>;
+			status = "disabled";
+		};
+	};
+
+	__overrides__ {
+		cam0-pwdn-ctrl;
+		cam0-pwdn;
+		cam0-led-ctrl;
+		cam0-led;
+	};
+};
+
+&vc4 {
+	status = "disabled";
+};

arch/arm/boot/dts/bcm2710-rpi-2-b.dts

@@ -0,0 +1,125 @@
+/dts-v1/;
+
+#include "bcm2710.dtsi"
+#include "bcm2709-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837";
+	model = "Raspberry Pi 2 Model B rev 1.2";
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <1>; /* output */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins = <40 45>;
+		brcm,function = <4>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 47 0>;
+	};
+
+	pwr_led: pwr {
+		label = "led1";
+		linux,default-trigger = "input";
+		gpios = <&gpio 35 0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		pwr_led_gpio = <&pwr_led>,"gpios:4";
+		pwr_led_activelow = <&pwr_led>,"gpios:8";
+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts

@@ -0,0 +1,183 @@
+/dts-v1/;
+
+#include "bcm2710.dtsi"
+#include "bcm2709-rpi.dtsi"
+#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B+";
+
+	chosen {
+		bootargs = "coherent_pool=1M 8250.nr_uarts=1";
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		mmc1 = &mmcnr;
+	};
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <1>; /* output */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	sdio_pins: sdio_pins {
+		brcm,pins =     <34 35 36 37 38 39>;
+		brcm,function = <7>; // alt3 = SD1
+		brcm,pull =     <0 2 2 2 2 2>;
+	};
+
+	bt_pins: bt_pins {
+		brcm,pins = <43>;
+		brcm,function = <4>; /* alt0:GPCLK2 */
+		brcm,pull = <0>;
+	};
+
+	uart0_pins: uart0_pins {
+		brcm,pins = <32 33>;
+		brcm,function = <7>; /* alt3=UART0 */
+		brcm,pull = <0 2>;
+	};
+
+	uart1_pins: uart1_pins {
+		brcm,pins;
+		brcm,function;
+		brcm,pull;
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins = <40 41>;
+		brcm,function = <4>;
+	};
+};
+
+&mmcnr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&firmware {
+	expgpio: expgpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins &bt_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 29 0>;
+	};
+
+	pwr_led: pwr {
+		label = "led1";
+		linux,default-trigger = "default-on";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		pwr_led_gpio = <&pwr_led>,"gpios:4";
+		pwr_led_activelow = <&pwr_led>,"gpios:8";
+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2710-rpi-3-b.dts

@@ -0,0 +1,194 @@
+/dts-v1/;
+
+#include "bcm2710.dtsi"
+#include "bcm2709-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B";
+
+	chosen {
+		bootargs = "coherent_pool=1M 8250.nr_uarts=1";
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		mmc1 = &mmcnr;
+	};
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <1>; /* output */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	sdio_pins: sdio_pins {
+		brcm,pins =     <34 35 36 37 38 39>;
+		brcm,function = <7>; // alt3 = SD1
+		brcm,pull =     <0 2 2 2 2 2>;
+	};
+
+	bt_pins: bt_pins {
+		brcm,pins = <43>;
+		brcm,function = <4>; /* alt0:GPCLK2 */
+		brcm,pull = <0>;
+	};
+
+	uart0_pins: uart0_pins {
+		brcm,pins = <32 33>;
+		brcm,function = <7>; /* alt3=UART0 */
+		brcm,pull = <0 2>;
+	};
+
+	uart1_pins: uart1_pins {
+		brcm,pins;
+		brcm,function;
+		brcm,pull;
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins = <40 41>;
+		brcm,function = <4>;
+	};
+};
+
+&mmcnr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&soc {
+	virtgpio: virtgpio {
+		compatible = "brcm,bcm2835-virtgpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		firmware = <&firmware>;
+		status = "okay";
+	};
+
+};
+
+&firmware {
+	expgpio: expgpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins &bt_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&virtgpio 0 0>;
+	};
+
+	pwr_led: pwr {
+		label = "led1";
+		linux,default-trigger = "input";
+		gpios = <&expgpio 7 0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		pwr_led_gpio = <&pwr_led>,"gpios:4";
+		pwr_led_activelow = <&pwr_led>,"gpios:8";
+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2710-rpi-cm3.dts

@@ -0,0 +1,135 @@
+/dts-v1/;
+
+#include "bcm2710.dtsi"
+#include "bcm2709-rpi.dtsi"
+#include "bcm283x-rpi-csi0-2lane.dtsi"
+#include "bcm283x-rpi-csi1-4lane.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+	model = "Raspberry Pi Compute Module 3";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <1>; /* output */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins;
+		brcm,function;
+	};
+};
+
+&soc {
+	virtgpio: virtgpio {
+		compatible = "brcm,bcm2835-virtgpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		firmware = <&firmware>;
+		status = "okay";
+	};
+
+};
+
+&firmware {
+	expgpio: expgpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&virtgpio 0 0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>;
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2710.dtsi

@@ -0,0 +1,25 @@
+#include "bcm2837.dtsi"
+#include "bcm270x.dtsi"
+
+/ {
+	compatible = "brcm,bcm2837", "brcm,bcm2836";
+
+	arm-pmu {
+#ifdef RPI364
+		compatible = "arm,armv8-pmuv3", "arm,cortex-a7-pmu";
+#else
+		compatible = "arm,cortex-a7-pmu";
+#endif
+	};
+
+	soc {
+		/delete-node/ timer@7e003000;
+	};
+
+	__overrides__ {
+		arm_freq = <&cpu0>, "clock-frequency:0",
+		       <&cpu1>, "clock-frequency:0",
+		       <&cpu2>, "clock-frequency:0",
+		       <&cpu3>, "clock-frequency:0";
+	};
+};

arch/arm/boot/dts/bcm2711-rpi-4-b.dts

@@ -0,0 +1,338 @@
+/dts-v1/;
+
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
+
+/ {
+	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
+	model = "Raspberry Pi 4 Model B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0>;
+	};
+
+	chosen {
+		bootargs = "coherent_pool=1M 8250.nr_uarts=1 cma=64M";
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		mmc0 = &emmc2;
+		mmc1 = &mmcnr;
+		mmc2 = &sdhost;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		/delete-property/ ethernet;
+		/delete-property/ intc;
+		ethernet0 = &genet;
+	};
+};
+
+&soc {
+	virtgpio: virtgpio {
+		compatible = "brcm,bcm2835-virtgpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		firmware = <&firmware>;
+		status = "okay";
+	};
+};
+
+&mmcnr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "PWR_LED_OFF",
+				  "GLOBAL_RESET",
+				  "VDD_SD_IO_SEL",
+				  "CAM_GPIO",
+				  "",
+				  "";
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins &bt_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
+	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+
+	spidev0: spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+
+	spidev1: spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <125000000>;
+	};
+};
+
+// =============================================
+// Board specific stuff here
+
+/ {
+
+	sd_io_1v8_reg: sd_io_1v8_reg {
+		status = "okay";
+		compatible = "regulator-gpio";
+		vin-supply = <&vdd_5v0_reg>;
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+	};
+};
+
+&sdhost {
+	status = "disabled";
+};
+
+&emmc2 {
+	status = "okay";
+	broken-cd;
+	vqmmc-supply = <&sd_io_1v8_reg>;
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+	};
+
+	pwr_led: pwr {
+		label = "led1";
+		linux,default-trigger = "default-on";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
+&sdhost_gpio48 {
+	brcm,pins = <22 23 24 25 26 27>;
+	brcm,function = <BCM2835_FSEL_ALT0>;
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <9 10 11>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+
+	spi0_cs_pins: spi0_cs_pins {
+		brcm,pins = <8 7>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi3_pins: spi3_pins {
+		brcm,pins = <1 2 3>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi3_cs_pins: spi3_cs_pins {
+		brcm,pins = <0 24>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi4_pins: spi4_pins {
+		brcm,pins = <5 6 7>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi4_cs_pins: spi4_cs_pins {
+		brcm,pins = <4 25>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi5_pins: spi5_pins {
+		brcm,pins = <13 14 15>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi5_cs_pins: spi5_cs_pins {
+		brcm,pins = <12 26>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	spi6_pins: spi6_pins {
+		brcm,pins = <19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	spi6_cs_pins: spi6_cs_pins {
+		brcm,pins = <18 27>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c3_pins: i2c3 {
+		brcm,pins = <4 5>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c4_pins: i2c4 {
+		brcm,pins = <8 9>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c5_pins: i2c5 {
+		brcm,pins = <12 13>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2c6_pins: i2c6 {
+		brcm,pins = <22 23>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+		brcm,pull = <BCM2835_PUD_UP>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+
+	sdio_pins: sdio_pins {
+		brcm,pins =     <34 35 36 37 38 39>;
+		brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
+		brcm,pull =     <0 2 2 2 2 2>;
+	};
+
+	bt_pins: bt_pins {
+		brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0
+				 // to fool pinctrl
+		brcm,function = <0>;
+		brcm,pull = <2>;
+	};
+
+	uart0_pins: uart0_pins {
+		brcm,pins = <32 33>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+		brcm,pull = <0 2>;
+	};
+
+	uart1_pins: uart1_pins {
+		brcm,pins;
+		brcm,function;
+		brcm,pull;
+	};
+
+	uart2_pins: uart2_pins {
+		brcm,pins = <0 1>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
+
+	uart3_pins: uart3_pins {
+		brcm,pins = <4 5>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
+
+	uart4_pins: uart4_pins {
+		brcm,pins = <8 9>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
+
+	uart5_pins: uart5_pins {
+		brcm,pins = <12 13>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <0 2>;
+	};
+
+	audio_pins: audio_pins {
+		brcm,pins = <40 41>;
+		brcm,function = <4>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		pwr_led_gpio = <&pwr_led>,"gpios:4";
+		pwr_led_activelow = <&pwr_led>,"gpios:8";
+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2711-rpi.dtsi

@@ -0,0 +1,7 @@
+#include "bcm2708-rpi.dtsi"
+#include "bcm2838-rpi.dtsi"
+
+&v3d {
+     /* Undo the overwriting by bcm270x.dtsi */
+     power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+};

arch/arm/boot/dts/bcm2711.dtsi

@@ -0,0 +1,44 @@
+#include "bcm2838.dtsi"
+#include "bcm270x.dtsi"
+
+/ {
+	soc {
+		/delete-node/ v3d@7ec00000;
+	};
+
+	__overrides__ {
+		arm_freq;
+	};
+};
+
+&v3d {
+	status = "disabled";
+};
+
+&firmwarekms {
+	interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&smi {
+	interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmcnr {
+	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	reg = <0x7e980000 0x10000>,
+	      <0x7e00b200 0x200>;
+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio {
+	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+};

arch/arm/boot/dts/bcm2835-common.dtsi

@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations.
+ */
+
+/ {
+	soc {
+		timer@7e003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			/* This could be a reference to BCM2835_CLOCK_TIMER,
+			 * but we don't have the driver using the common clock
+			 * support yet.
+			 */
+			clock-frequency = <1000000>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		thermal: thermal@7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		v3d: v3d@7ec00000 {
+			compatible = "brcm,bcm2835-v3d";
+			reg = <0x7ec00000 0x1000>;
+			interrupts = <1 10>;
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+		};
+	};
+};
+
+&gpio {
+	i2c_slave_gpio18: i2c_slave_gpio18 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	jtag_gpio4: jtag_gpio4 {
+		brcm,pins = <4 5 6 12 13>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+};

arch/arm/boot/dts/bcm2835-rpi-a-plus.dts

@@ -3,6 +3,7 @@
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
 
 / {
 	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
@@ -99,6 +100,8 @@
 
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
 };
 
 &pwm {
@@ -107,6 +110,13 @@
 	status = "okay";
 };
 
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2835-rpi-a.dts

@@ -3,6 +3,7 @@
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
 
 / {
 	compatible = "raspberrypi,model-a", "brcm,bcm2835";
@@ -94,6 +95,8 @@
 
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
 };
 
 &pwm {
@@ -102,6 +105,13 @@
 	status = "okay";
 };
 
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2835-rpi-b-plus.dts

@@ -4,6 +4,7 @@
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
@@ -101,6 +102,8 @@
 
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
 };
 
 &pwm {
@@ -109,6 +112,13 @@
 	status = "okay";
 };
 
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts

@@ -4,6 +4,7 @@
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
@@ -94,6 +95,8 @@
 
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
 };
 
 &pwm {
@@ -102,6 +105,13 @@
 	status = "okay";
 };
 
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2835-rpi-b.dts

@@ -4,6 +4,7 @@
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
@@ -89,6 +90,8 @@
 
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
 };
 
 &pwm {
@@ -97,6 +100,13 @@
 	status = "okay";
 };
 
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts

@@ -79,6 +79,15 @@
 
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
 };
 
 &uart0 {

arch/arm/boot/dts/bcm2835-rpi-zero-w.dts

@@ -100,12 +100,15 @@
 
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
 };
 
 &sdhci {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+	bus-width = <4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	non-removable;
 	status = "okay";
@@ -116,6 +119,13 @@
 	};
 };
 
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;

arch/arm/boot/dts/bcm2835-rpi-zero.dts

@@ -7,6 +7,7 @@
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
 
 / {
 	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
@@ -96,6 +97,15 @@
 
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
 };
 
 &uart0 {

arch/arm/boot/dts/bcm2835-rpi.dtsi

@@ -34,6 +34,22 @@
 			interrupts = <0 2>;
 		};
 	};
+
+	vdd_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_5v0_reg: fixedregulator_5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 };
 
 &gpio {
@@ -68,19 +84,6 @@
 	status = "okay";
 };
 
-&sdhci {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio48>;
-	bus-width = <4>;
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	status = "okay";
-	bus-width = <4>;
-};
-
 &usb {
 	power-domains = <&power RPI_POWER_DOMAIN_USB>;
 };
@@ -90,6 +93,10 @@
 	status = "okay";
 };
 
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
+
 &vec {
 	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
 	status = "okay";
@@ -102,3 +109,11 @@
 &dsi1 {
 	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
 };
+
+&csi0 {
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
+};
+
+&csi1 {
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+};

arch/arm/boot/dts/bcm2835.dtsi

@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";

arch/arm/boot/dts/bcm2836-rpi-2-b.dts

@@ -4,6 +4,7 @@
 #include "bcm2836-rpi.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
 
 / {
 	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
@@ -105,6 +106,8 @@
 
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
 };
 
 &pwm {
@@ -113,6 +116,13 @@
 	status = "okay";
 };
 
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio14>;

arch/arm/boot/dts/bcm2836.dtsi

@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";

arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts

@@ -124,6 +124,8 @@
 
 &hdmi {
 	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
 };
 
 &pwm {

arch/arm/boot/dts/bcm2837-rpi-3-b.dts

@@ -4,6 +4,7 @@
 #include "bcm2836-rpi.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-csi1-2lane.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
@@ -125,6 +126,8 @@
 
 &hdmi {
 	hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
 };
 
 /* uart0 communicates with the BT module */

arch/arm/boot/dts/bcm2837.dtsi

@@ -1,4 +1,5 @@
 #include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2837";

arch/arm/boot/dts/bcm2838-rpi-4-b.dts

@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2838.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2838-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
+	model = "Raspberry Pi 4 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		reg = <0 0 0x40000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	};
+
+	sd_io_1v8_reg: sd_io_1v8_reg {
+		status = "okay";
+		compatible = "regulator-gpio";
+		vin-supply = <&vdd_5v0_reg>;
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "PWR_LED_OFF",
+				  "GLOBAL_RESET",
+				  "VDD_SD_IO_SEL",
+				  "CAM_GPIO",
+				  "",
+				  "";
+		status = "okay";
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* EMMC2 is used to drive the SD card */
+&emmc2 {
+	status = "okay";
+	broken-cd;
+	vqmmc-supply = <&sd_io_1v8_reg>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};

arch/arm/boot/dts/bcm2838-rpi.dtsi

@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	soc {
+		/delete-node/ mailbox@7e00b840;
+	};
+};
+
+&scb {
+	vchiq: mailbox@7e00b840 {
+		compatible = "brcm,bcm2838-vchiq";
+		reg = <0 0x7e00b840 0x3c>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&dma {
+	/* The VPU firmware uses DMA channel 11 for VCHIQ */
+	brcm,dma-channel-mask = <0x1f5>;
+};
+
+&dma40 {
+	/* The VPU firmware DMA channel 11 for VCHIQ */
+	brcm,dma-channel-mask = <0x7000>;
+};

arch/arm/boot/dts/bcm2838.dtsi

@@ -0,0 +1,746 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/ {
+	compatible = "brcm,bcm2838";
+
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gicv2>;
+
+	soc {
+		ranges = <0x7e000000  0x0 0xfe000000  0x01800000>,
+			 <0x7c000000  0x0 0xfc000000  0x02000000>,
+			 <0x40000000  0x0 0xff800000  0x00800000>;
+		/* Emulate a contiguous 30-bit address range for DMA */
+		dma-ranges = <0xc0000000  0x0 0x00000000  0x3c000000>;
+
+		/delete-node/ interrupt-controller@7e00f300;
+		/delete-node/ v3d@7ec00000;
+
+		local_intc: local_intc@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+		};
+
+		gicv2: gic400@40041000 {
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "arm,gic-400";
+			reg =	<0x40041000 0x1000>,
+				<0x40042000 0x2000>,
+				<0x40044000 0x2000>,
+				<0x40046000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		thermal: thermal@7d5d2200 {
+			compatible = "brcm,avs-tmon-bcm2838";
+			reg = <0x7d5d2200 0x2c>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tmon";
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			#thermal-sensor-cells = <0>;
+			status = "okay";
+		};
+
+		pm: watchdog@7e100000 {
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>,
+			      <0x7ec11000 0x20>;
+		};
+
+		rng@7e104000 {
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart2: serial@7e201400 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201400 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart3: serial@7e201600 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201600 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart4: serial@7e201800 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201800 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart5: serial@7e201a00 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201a00 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		spi@7e204000 {
+			reg = <0x7e204000 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spi3: spi@7e204600 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204600 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@7e204800 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204800 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi5: spi@7e204a00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204a00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi6: spi@7e204c00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204c00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@7e205600 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205600 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@7e205800 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205800 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@7e205a00 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205a00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@7e205c00 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205c00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pixelvalve@7e206000 {
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pixelvalve@7e207000 {
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm1: pwm@7e20c800 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c800 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		emmc2: emmc2@7e340000 {
+			compatible = "brcm,bcm2711-emmc2";
+			status = "okay";
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2711_CLOCK_EMMC2>;
+			reg = <0x7e340000 0x100>;
+		};
+
+		hvs@7e400000 {
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pixelvalve@7e807000 {
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+		};
+	};
+
+	v3dbus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <2>;
+		ranges = <0x7c500000  0x0 0xfc500000  0x0 0x03300000>,
+			 <0x40000000  0x0 0xff800000  0x0 0x00800000>;
+		dma-ranges = <0x00000000  0x0 0x00000000  0x4 0x00000000>;
+
+		v3d: v3d@7ec04000 {
+			compatible = "brcm,2711-v3d";
+			reg =
+			    <0x7ec00000 0x0 0x4000>,
+			    <0x7ec04000 0x0 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			clocks = <&clocks BCM2835_CLOCK_V3D>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+	};
+
+	scb: scb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x0 0x40000000  0x0 0xff800000  0x00800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>,
+			 <0x0 0x00000000  0x0 0x00000000  0xfc000000>;
+		dma-ranges = <0x0 0x00000000  0x0 0x00000000  0xfc000000>;
+
+		pcie_0: pcie@7d500000 {
+			reg = <0x0 0x7d500000 0x9310>,
+			      <0x0 0x7e00f300 0x20>;
+			msi-controller;
+			msi-parent = <&pcie_0>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			bus-range = <0x0 0x01>;
+			compatible = "brcm,bcm7211-pcie", "brcm,bcm7445-pcie",
+				     "brcm,pci-plat-dev";
+			max-link-speed = <2>;
+			tot-num-pcie = <1>;
+			linux,pci-domain = <0>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+						IRQ_TYPE_LEVEL_HIGH
+					 0 0 0 2 &gicv2 GIC_SPI 144
+						IRQ_TYPE_LEVEL_HIGH
+					 0 0 0 3 &gicv2 GIC_SPI 145
+						IRQ_TYPE_LEVEL_HIGH
+					 0 0 0 4 &gicv2 GIC_SPI 146
+						IRQ_TYPE_LEVEL_HIGH>;
+
+			/* Map outbound accesses from scb:0x6_00000000-03ffffff
+			 * to pci:0x0_f8000000-fbffffff
+			 */
+			ranges = <0x02000000 0x0 0xf8000000  0x6 0x00000000
+				  0x0 0x04000000>;
+			/* Map inbound accesses from pci:0x0_00000000..ffffffff
+			 * to scb:0x0_00000000-ffffffff
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000  0x0 0x00000000
+				      0x1 0x00000000>;
+			status = "okay";
+		};
+
+		genet: genet@7d580000 {
+			compatible = "brcm,genet-v5";
+			reg = <0x0 0x7d580000 0x10000>;
+			status = "okay";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			phy-handle = <&phy1>;
+			phy-mode = "rgmii";
+			mdio@e14 {
+				#address-cells = <0x0>;
+				#size-cells = <0x1>;
+				compatible = "brcm,genet-mdio-v5";
+				reg = <0xe14 0x8>;
+				reg-names = "mdio";
+				phy1: genet-phy@0 {
+					compatible =
+						"ethernet-phy-ieee802.3-c22";
+					/* No interrupts - use PHY_POLL */
+					max-speed = <1000>;
+					reg = <0x1>;
+				};
+			};
+		};
+
+		dma40: dma@7e007b00 {
+			compatible = "brcm,bcm2838-dma";
+			reg = <0x0 0x7e007b00 0x400>;
+			interrupts =
+				<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4 11 */
+				<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4 12 */
+				<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, /* dma4 13 */
+				<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; /* dma4 14 */
+			interrupt-names = "dma11",
+				"dma12",
+				"dma13",
+				"dma14";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7800>;
+		};
+		/* DMA4 - 40 bit DMA engines */
+
+		xhci: xhci@7e9c0000 {
+			compatible = "generic-xhci";
+			status = "disabled";
+			reg = <0x0 0x7e9c0000 0x100000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hevc-decoder@7eb00000 {
+			compatible = "raspberrypi,rpivid-hevc-decoder";
+			reg = <0x0 0x7eb00000 0x10000>;
+			status = "okay";
+		};
+
+		rpivid-local-intc@7eb10000 {
+			compatible = "raspberrypi,rpivid-local-intc";
+			reg = <0x0 0x7eb10000 0x1000>;
+			status = "okay";
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		h264-decoder@7eb20000 {
+			compatible = "raspberrypi,rpivid-h264-decoder";
+			reg = <0x0 0x7eb20000 0x10000>;
+			status = "okay";
+		};
+
+		vp9-decoder@7eb30000 {
+			compatible = "raspberrypi,rpivid-vp9-decoder";
+			reg = <0x0 0x7eb30000 0x10000>;
+			status = "okay";
+		};
+	};
+};
+
+&clk_osc {
+	clock-frequency = <54000000>;
+};
+
+&clocks {
+	compatible = "brcm,bcm2711-cprman";
+};
+
+&cpu_thermal {
+	coefficients = <(-487)  410040>;
+};
+
+&dsi0 {
+	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&dsi1 {
+	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio {
+	compatible = "brcm,bcm2711-gpio", "brcm,bcm2835-gpio";
+
+	gpclk0_gpio49: gpclk0_gpio49 {
+		brcm,pins = <49>;
+		brcm,function = <BCM2835_FSEL_ALT1>;
+		brcm,pull = <BCM2835_PUD_OFF>;
+	};
+	gpclk1_gpio50: gpclk1_gpio50 {
+		brcm,pins = <50>;
+		brcm,function = <BCM2835_FSEL_ALT1>;
+		brcm,pull = <BCM2835_PUD_OFF>;
+	};
+	gpclk2_gpio51: gpclk2_gpio51 {
+		brcm,pins = <51>;
+		brcm,function = <BCM2835_FSEL_ALT1>;
+		brcm,pull = <BCM2835_PUD_OFF>;
+	};
+
+	i2c0_gpio46: i2c0_gpio46 {
+		brcm,pins = <46 47>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	i2c1_gpio46: i2c1_gpio46 {
+		brcm,pins = <46 47>;
+		brcm,function = <BCM2835_FSEL_ALT1>;
+	};
+	i2c3_gpio2: i2c3_gpio2 {
+		brcm,pins = <2 3>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	i2c3_gpio4: i2c3_gpio4 {
+		brcm,pins = <4 5>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	i2c4_gpio6: i2c4_gpio6 {
+		brcm,pins = <6 7>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	i2c4_gpio8: i2c4_gpio8 {
+		brcm,pins = <8 9>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	i2c5_gpio10: i2c5_gpio10 {
+		brcm,pins = <10 11>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	i2c5_gpio12: i2c5_gpio12 {
+		brcm,pins = <12 13>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	i2c6_gpio0: i2c6_gpio0 {
+		brcm,pins = <0 1>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	i2c6_gpio22: i2c6_gpio22 {
+		brcm,pins = <22 23>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	i2c_slave_gpio8: i2c_slave_gpio8 {
+		brcm,pins = <8 9 10 11>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	jtag_gpio48: jtag_gpio48 {
+		brcm,pins = <48 49 50 51 52 53>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+	};
+
+	mii_gpio28: mii_gpio28 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+	};
+	mii_gpio36: mii_gpio36 {
+		brcm,pins = <36 37 38 39>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+
+	pcm_gpio50: pcm_gpio50 {
+		brcm,pins = <50 51 52 53>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+
+	pwm0_gpio52: pwm0_gpio52 {
+		brcm,pins = <52>;
+		brcm,function = <BCM2835_FSEL_ALT1>;
+		brcm,pull = <BCM2835_PUD_OFF>;
+	};
+	pwm1_gpio53: pwm1_gpio53 {
+		brcm,pins = <53>;
+		brcm,function = <BCM2835_FSEL_ALT1>;
+		brcm,pull = <BCM2835_PUD_OFF>;
+	};
+
+	/* The following group consists of:
+         *  RGMII_START_STOP
+         *  RGMII_RX_OK
+         */
+	rgmii_gpio35: rgmii_gpio35 {
+		brcm,pins = <35 36>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+	};
+	rgmii_irq_gpio34: rgmii_irq_gpio34 {
+		brcm,pins = <34>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	rgmii_irq_gpio39: rgmii_irq_gpio39 {
+		brcm,pins = <39>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+	};
+	rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
+		brcm,pins = <28 29>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
+		brcm,pins = <37 38>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+	};
+
+	spi0_gpio46: spi0_gpio46 {
+		brcm,pins = <46 47 48 49>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+	spi2_gpio46: spi2_gpio46 {
+		brcm,pins = <46 47 48 49 50>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	spi3_gpio0: spi3_gpio0 {
+		brcm,pins = <0 1 2 3>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+	spi4_gpio4: spi4_gpio4 {
+		brcm,pins = <4 5 6 7>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+	spi5_gpio12: spi5_gpio12 {
+		brcm,pins = <12 13 14 15>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+	spi6_gpio18: spi6_gpio18 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	uart2_gpio0: uart2_gpio0 {
+		brcm,pins = <0 1>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
+	};
+	uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
+		brcm,pins = <2 3>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
+	};
+	uart3_gpio4: uart3_gpio4 {
+		brcm,pins = <4 5>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
+	};
+	uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
+		brcm,pins = <6 7>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
+	};
+	uart4_gpio8: uart4_gpio8 {
+		brcm,pins = <8 9>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
+	};
+	uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
+		brcm,pins = <10 11>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
+	};
+	uart5_gpio12: uart5_gpio12 {
+		brcm,pins = <12 13>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
+	};
+	uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
+		brcm,pins = <14 15>;
+		brcm,function = <BCM2835_FSEL_ALT4>;
+		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
+	};
+};
+
+&vec {
+	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+	status = "disabled";
+};
+
+&hdmi {
+	interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi2 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&csi0 {
+	interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&csi1 {
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdhci {
+	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c0 {
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c2 {
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio {
+	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mailbox {
+	interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rng {
+	compatible = "brcm,bcm2838-rng200";
+};
+
+&sdhost {
+	interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&dma {
+	reg = <0x7e007000 0xb00>;
+	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite  7 */
+		<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite  8 */
+		<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite  9 */
+		<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; /* dmalite 10 */
+	interrupt-names = "dma0",
+			  "dma1",
+			  "dma2",
+			  "dma3",
+			  "dma4",
+			  "dma5",
+			  "dma6",
+			  "dma7",
+			  "dma8",
+			  "dma9",
+			  "dma10";
+	brcm,dma-channel-mask = <0x07f5>;
+};
+
+&txp {
+	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+};

arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
+&csi0 {
+	port {
+		endpoint {
+			data-lanes = <1 2>;
+		};
+	};
+};

arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
+&csi1 {
+	port {
+		endpoint {
+			data-lanes = <1 2>;
+		};
+	};
+};

arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
+&csi1 {
+	port {
+		endpoint {
+			data-lanes = <1 2 3 4>;
+		};
+	};
+};

arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi

@@ -29,6 +29,9 @@
 					#size-cells = <0x0>;
 					eth_phy: ethernet-phy@1 {
 						reg = <1>;
+						microchip,eee-enabled;
+						microchip,tx-lpi-timer = <600>; /* non-aggressive*/
+						microchip,downshift-after = <2>;
 						microchip,led-modes = <
 							LAN78XX_LINK_1000_ACTIVITY
 							LAN78XX_LINK_10_100_ACTIVITY
@@ -39,3 +42,15 @@
 		};
 	};
 };
+
+
+/ {
+	__overrides__ {
+		eee = <&eth_phy>,"microchip,eee-enabled?";
+		tx_lpi_timer = <&eth_phy>,"microchip,tx-lpi-timer:0";
+		eth_led0 = <&eth_phy>,"microchip,led-modes:0";
+		eth_led1 = <&eth_phy>,"microchip,led-modes:4";
+		eth_downshift_after = <&eth_phy>,"microchip,downshift-after:0";
+		eth_max_speed = <&eth_phy>,"max-speed:0";
+	};
+};

arch/arm/boot/dts/bcm283x.dtsi

@@ -56,18 +56,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		timer@7e003000 {
-			compatible = "brcm,bcm2835-system-timer";
-			reg = <0x7e003000 0x1000>;
-			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-			/* This could be a reference to BCM2835_CLOCK_TIMER,
-			 * but we don't have the driver using the common clock
-			 * support yet.
-			 */
-			clock-frequency = <1000000>;
-		};
-
-		txp@7e004000 {
+		txp: txp@7e004000 {
 			compatible = "brcm,bcm2835-txp";
 			reg = <0x7e004000 0x20>;
 			interrupts = <1 11>;
@@ -114,13 +103,6 @@
 			brcm,dma-channel-mask = <0x7f35>;
 		};
 
-		intc: interrupt-controller@7e00b200 {
-			compatible = "brcm,bcm2835-armctrl-ic";
-			reg = <0x7e00b200 0x200>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
 		pm: watchdog@7e100000 {
 			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
 			#power-domain-cells = <1>;
@@ -149,7 +131,7 @@
 				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
 		};
 
-		rng@7e104000 {
+		rng: rng@7e104000 {
 			compatible = "brcm,bcm2835-rng";
 			reg = <0x7e104000 0x10>;
 			interrupts = <2 29>;
@@ -184,8 +166,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			/* Defines pin muxing groups according to
-			 * BCM2835-ARM-Peripherals.pdf page 102.
+			/* Defines common pin muxing groups
 			 *
 			 * While each pin can have its mux selected
 			 * for various functions individually, some
@@ -263,15 +244,7 @@
 				brcm,pins = <44 45>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
-			i2c_slave_gpio18: i2c_slave_gpio18 {
-				brcm,pins = <18 19 20 21>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
 
-			jtag_gpio4: jtag_gpio4 {
-				brcm,pins = <4 5 6 12 13>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
 			jtag_gpio22: jtag_gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
@@ -397,7 +370,7 @@
 
 		uart0: serial@7e201000 {
 			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x1000>;
+			reg = <0x7e201000 0x200>;
 			interrupts = <2 25>;
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
@@ -410,7 +383,7 @@
 			reg = <0x7e202000 0x100>;
 			interrupts = <2 24>;
 			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			dmas = <&dma 13>;
+			dmas = <&dma (13|(1<<29))>;
 			dma-names = "rx-tx";
 			status = "disabled";
 		};
@@ -428,9 +401,11 @@
 
 		spi: spi@7e204000 {
 			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204000 0x1000>;
+			reg = <0x7e204000 0x200>;
 			interrupts = <2 22>;
 			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			dmas = <&dma 6>, <&dma 7>;
+			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -438,7 +413,7 @@
 
 		i2c0: i2c@7e205000 {
 			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205000 0x1000>;
+			reg = <0x7e205000 0x200>;
 			interrupts = <2 21>;
 			clocks = <&clocks BCM2835_CLOCK_VPU>;
 			#address-cells = <1>;
@@ -488,14 +463,6 @@
 
 		};
 
-		thermal: thermal@7e212000 {
-			compatible = "brcm,bcm2835-thermal";
-			reg = <0x7e212000 0x8>;
-			clocks = <&clocks BCM2835_CLOCK_TSENS>;
-			#thermal-sensor-cells = <0>;
-			status = "disabled";
-		};
-
 		aux: aux@7e215000 {
 			compatible = "brcm,bcm2835-aux";
 			#clock-cells = <1>;
@@ -575,6 +542,32 @@
 			status = "disabled";
 		};
 
+		csi0: csi@7e800000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e800000 0x800>,
+			      <0x7e802000 0x4>;
+			interrupts = <2 6>;
+			clocks = <&clocks BCM2835_CLOCK_CAM0>;
+			clock-names = "lp";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		csi1: csi@7e801000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e801000 0x800>,
+			      <0x7e802004 0x4>;
+			interrupts = <2 7>;
+			clocks = <&clocks BCM2835_CLOCK_CAM1>;
+			clock-names = "lp";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
 		i2c1: i2c@7e804000 {
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e804000 0x1000>;
@@ -635,13 +628,6 @@
 			phy-names = "usb2-phy";
 		};
 
-		v3d: v3d@7ec00000 {
-			compatible = "brcm,bcm2835-v3d";
-			reg = <0x7ec00000 0x1000>;
-			interrupts = <1 10>;
-			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
-		};
-
 		vc4: gpu {
 			compatible = "brcm,bcm2835-vc4";
 		};

arch/arm/boot/dts/bcm47094-linksys-panamera.dts

@@ -126,6 +126,9 @@
 	};
 
 	mdio-bus-mux {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		/* BIT(9) = 1 => external mdio */
 		mdio_ext: mdio@200 {
 			reg = <0x200>;

arch/arm/boot/dts/dra7-evm.dts

@@ -498,7 +498,7 @@
 	phy-supply = <&ldousb_reg>;
 };
 
-&gpio7 {
+&gpio7_target {
 	ti,no-reset-on-init;
 	ti,no-idle-on-init;
 };

arch/arm/boot/dts/dra7-l4.dtsi

@@ -1261,7 +1261,7 @@
 			};
 		};
 
-		target-module@51000 {			/* 0x48051000, ap 45 2e.0 */
+		gpio7_target: target-module@51000 {		/* 0x48051000, ap 45 2e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "gpio7";
 			reg = <0x51000 0x4>,
@@ -3025,7 +3025,7 @@
 
 		target-module@80000 {			/* 0x48480000, ap 31 16.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x80000 0x4>;
+			reg = <0x80020 0x4>;
 			reg-names = "rev";
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>;
 			clock-names = "fck";
@@ -4577,7 +4577,7 @@
 
 		target-module@c000 {			/* 0x4ae3c000, ap 30 04.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xc000 0x4>;
+			reg = <0xc020 0x4>;
 			reg-names = "rev";
 			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>;
 			clock-names = "fck";

arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi

@@ -32,7 +32,7 @@
  *
  * Datamanual Revisions:
  *
- * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
+ * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
  * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
  *
  */
@@ -229,45 +229,45 @@
 
 	mmc3_pins_default: mmc3_pins_default {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_hs: mmc3_pins_hs {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_sdr12: mmc3_pins_sdr12 {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_sdr25: mmc3_pins_sdr25 {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 

arch/arm/boot/dts/exynos5420-peach-pit.dts

@@ -440,6 +440,7 @@
 				regulator-name = "vdd_ldo10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};