Merge pull request #146 from kamalmostafa/rpi-patches

spi/spi-bcm2708: respect per-transfer SPI clock speed_hz value

Documentation/HOWTO

@@ -275,8 +275,8 @@ versions.
 If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
 kernel is the current stable kernel.
 
-2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are
-released as needs dictate.  The normal release period is approximately 
+2.6.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+are released as needs dictate.  The normal release period is approximately
 two weeks, but it can be longer if there are no pressing problems.  A
 security-related problem, instead, can cause a release to happen almost
 instantly.

Documentation/development-process/5.Posting

@@ -271,10 +271,10 @@ copies should go to:
    the linux-kernel list.
 
  - If you are fixing a bug, think about whether the fix should go into the
-   next stable update.  If so, stable@kernel.org should get a copy of the
-   patch.  Also add a "Cc: stable@kernel.org" to the tags within the patch
-   itself; that will cause the stable team to get a notification when your
-   fix goes into the mainline.
+   next stable update.  If so, stable@vger.kernel.org should get a copy of
+   the patch.  Also add a "Cc: stable@vger.kernel.org" to the tags within
+   the patch itself; that will cause the stable team to get a notification
+   when your fix goes into the mainline.
 
 When selecting recipients for a patch, it is good to have an idea of who
 you think will eventually accept the patch and get it merged.  While it

Documentation/hwspinlock.txt

@@ -39,23 +39,20 @@ independent, drivers.
      in case an unused hwspinlock isn't available. Users of this
      API will usually want to communicate the lock's id to the remote core
      before it can be used to achieve synchronization.
-     Can be called from an atomic context (this function will not sleep) but
-     not from within interrupt context.
+     Should be called from a process context (might sleep).
 
   struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
    - assign a specific hwspinlock id and return its address, or NULL
      if that hwspinlock is already in use. Usually board code will
      be calling this function in order to reserve specific hwspinlock
      ids for predefined purposes.
-     Can be called from an atomic context (this function will not sleep) but
-     not from within interrupt context.
+     Should be called from a process context (might sleep).
 
   int hwspin_lock_free(struct hwspinlock *hwlock);
    - free a previously-assigned hwspinlock; returns 0 on success, or an
      appropriate error code on failure (e.g. -EINVAL if the hwspinlock
      is already free).
-     Can be called from an atomic context (this function will not sleep) but
-     not from within interrupt context.
+     Should be called from a process context (might sleep).
 
   int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout);
    - lock a previously-assigned hwspinlock with a timeout limit (specified in
@@ -232,15 +229,14 @@ int hwspinlock_example2(void)
 
   int hwspin_lock_register(struct hwspinlock *hwlock);
    - to be called from the underlying platform-specific implementation, in
-     order to register a new hwspinlock instance. Can be called from an atomic
-     context (this function will not sleep) but not from within interrupt
-     context. Returns 0 on success, or appropriate error code on failure.
+     order to register a new hwspinlock instance. Should be called from
+     a process context (this function might sleep).
+     Returns 0 on success, or appropriate error code on failure.
 
   struct hwspinlock *hwspin_lock_unregister(unsigned int id);
    - to be called from the underlying vendor-specific implementation, in order
      to unregister an existing (and unused) hwspinlock instance.
-     Can be called from an atomic context (will not sleep) but not from
-     within interrupt context.
+     Should be called from a process context (this function might sleep).
      Returns the address of hwspinlock on success, or NULL on error (e.g.
      if the hwspinlock is sill in use).
 

Documentation/power/runtime_pm.txt

@@ -782,6 +782,16 @@ will behave normally, not taking the autosuspend delay into account.
 Similarly, if the power.use_autosuspend field isn't set then the autosuspend
 helper functions will behave just like the non-autosuspend counterparts.
 
+Under some circumstances a driver or subsystem may want to prevent a device
+from autosuspending immediately, even though the usage counter is zero and the
+autosuspend delay time has expired.  If the ->runtime_suspend() callback
+returns -EAGAIN or -EBUSY, and if the next autosuspend delay expiration time is
+in the future (as it normally would be if the callback invoked
+pm_runtime_mark_last_busy()), the PM core will automatically reschedule the
+autosuspend.  The ->runtime_suspend() callback can't do this rescheduling
+itself because no suspend requests of any kind are accepted while the device is
+suspending (i.e., while the callback is running).
+
 The implementation is well suited for asynchronous use in interrupt contexts.
 However such use inevitably involves races, because the PM core can't
 synchronize ->runtime_suspend() callbacks with the arrival of I/O requests.

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -408,6 +408,7 @@ STAC92HD83*
   ref		Reference board
   mic-ref	Reference board with power management for ports
   dell-s14	Dell laptop
+  dell-vostro-3500	Dell Vostro 3500 laptop
   hp		HP laptops with (inverted) mute-LED
   hp-dv7-4000	HP dv-7 4000
   auto		BIOS setup (default)

Documentation/stable_kernel_rules.txt

@@ -24,10 +24,10 @@ Rules on what kind of patches are accepted, and which ones are not, into the
 Procedure for submitting patches to the -stable tree:
 
  - Send the patch, after verifying that it follows the above rules, to
-   stable@kernel.org.  You must note the upstream commit ID in the changelog
-   of your submission.
+   stable@vger.kernel.org.  You must note the upstream commit ID in the
+   changelog of your submission.
  - To have the patch automatically included in the stable tree, add the tag
-     Cc: stable@kernel.org
+     Cc: stable@vger.kernel.org
    in the sign-off area. Once the patch is merged it will be applied to
    the stable tree without anything else needing to be done by the author
    or subsystem maintainer.
@@ -35,10 +35,10 @@ Procedure for submitting patches to the -stable tree:
    cherry-picked than this can be specified in the following format in
    the sign-off area:
 
-     Cc: <stable@kernel.org> # .32.x: a1f84a3: sched: Check for idle
-     Cc: <stable@kernel.org> # .32.x: 1b9508f: sched: Rate-limit newidle
-     Cc: <stable@kernel.org> # .32.x: fd21073: sched: Fix affinity logic
-     Cc: <stable@kernel.org> # .32.x
+     Cc: <stable@vger.kernel.org> # .32.x: a1f84a3: sched: Check for idle
+     Cc: <stable@vger.kernel.org> # .32.x: 1b9508f: sched: Rate-limit newidle
+     Cc: <stable@vger.kernel.org> # .32.x: fd21073: sched: Fix affinity logic
+     Cc: <stable@vger.kernel.org> # .32.x
     Signed-off-by: Ingo Molnar <mingo@elte.hu>
 
    The tag sequence has the meaning of:

Documentation/usb/usbmon.txt

@@ -47,10 +47,11 @@ This allows to filter away annoying devices that talk continuously.
 
 2. Find which bus connects to the desired device
 
-Run "cat /proc/bus/usb/devices", and find the T-line which corresponds to
-the device. Usually you do it by looking for the vendor string. If you have
-many similar devices, unplug one and compare two /proc/bus/usb/devices outputs.
-The T-line will have a bus number. Example:
+Run "cat /sys/kernel/debug/usb/devices", and find the T-line which corresponds
+to the device. Usually you do it by looking for the vendor string. If you have
+many similar devices, unplug one and compare the two
+/sys/kernel/debug/usb/devices outputs. The T-line will have a bus number.
+Example:
 
 T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
 D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
@@ -58,7 +59,10 @@ P:  Vendor=0557 ProdID=2004 Rev= 1.00
 S:  Manufacturer=ATEN
 S:  Product=UC100KM V2.00
 
-Bus=03 means it's bus 3.
+"Bus=03" means it's bus 3. Alternatively, you can look at the output from
+"lsusb" and get the bus number from the appropriate line. Example:
+
+Bus 003 Device 002: ID 0557:2004 ATEN UC100KM V2.00
 
 3. Start 'cat'
 

MAINTAINERS

@@ -1230,7 +1230,7 @@ F:	Documentation/aoe/
 F:	drivers/block/aoe/
 
 ATHEROS ATH GENERIC UTILITIES
-M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:	"Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 F:	drivers/net/wireless/ath/*
@@ -1238,7 +1238,7 @@ F:	drivers/net/wireless/ath/*
 ATHEROS ATH5K WIRELESS DRIVER
 M:	Jiri Slaby <jirislaby@gmail.com>
 M:	Nick Kossifidis <mickflemm@gmail.com>
-M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:	"Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
 M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
@@ -1247,10 +1247,10 @@ S:	Maintained
 F:	drivers/net/wireless/ath/ath5k/
 
 ATHEROS ATH9K WIRELESS DRIVER
-M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
-M:	Jouni Malinen <jmalinen@atheros.com>
-M:	Vasanthakumar Thiagarajan <vasanth@atheros.com>
-M:	Senthil Balasubramanian <senthilkumar@atheros.com>
+M:	"Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
+M:	Jouni Malinen <jouni@qca.qualcomm.com>
+M:	Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
+M:	Senthil Balasubramanian <senthilb@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath9k
@@ -6129,7 +6129,7 @@ F:	arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
 M:	Greg Kroah-Hartman <greg@kroah.com>
-L:	stable@kernel.org
+L:	stable@vger.kernel.org
 S:	Maintained
 
 STAGING SUBSYSTEM

Makefile

@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 1
-SUBLEVEL = 0
+SUBLEVEL = 9
 EXTRAVERSION =
 NAME = "Divemaster Edition"
 

arch/arm/Kconfig

@@ -896,6 +896,21 @@ config PLAT_SPEAR
 	help
 	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
 
+config ARCH_BCM2708
+	bool "Broadcom BCM2708 family"
+	select CPU_V6
+	select ARM_AMBA
+	select HAVE_CLK
+	select HAVE_SCHED_CLOCK
+	select NEED_MACH_MEMORY_H
+	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
+	select ARM_ERRATA_411920
+	select MACH_BCM2708
+	select VC4
+	help
+	  This enables support for Broadcom BCM2708 boards.
+
 config ARCH_VT8500
 	bool "VIA/WonderMedia 85xx"
 	select CPU_ARM926T
@@ -1042,6 +1057,7 @@ source "arch/arm/plat-versatile/Kconfig"
 source "arch/arm/mach-vt8500/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
+source "arch/arm/mach-bcm2708/Kconfig"
 
 # Definitions to make life easier
 config ARCH_ACORN
@@ -1297,6 +1313,18 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config PL310_ERRATA_769419
+	bool "PL310 errata: no automatic Store Buffer drain"
+	depends on CACHE_L2X0
+	help
+	  On revisions of the PL310 prior to r3p2, the Store Buffer does
+	  not automatically drain. This can cause normal, non-cacheable
+	  writes to be retained when the memory system is idle, leading
+	  to suboptimal I/O performance for drivers using coherent DMA.
+	  This option adds a write barrier to the cpu_idle loop so that,
+	  on systems with an outer cache, the store buffer is drained
+	  explicitly.
+
 endmenu
 
 source "arch/arm/common/Kconfig"

arch/arm/Kconfig.debug

@@ -72,6 +72,191 @@ config DEBUG_LL
 	  in the kernel.  This is helpful if you are debugging code that
 	  executes before the console is initialized.
 
+	  Note that selecting this option will limit the kernel to a single
+	  UART definition, as specified below. Attempting to boot the kernel
+	  image on a different platform *will not work*, so this option should
+	  not be enabled for kernels that are intended to be portable.
+
+choice
+	prompt "Kernel low-level debugging port"
+	depends on DEBUG_LL
+
+	config DEBUG_LL_UART_NONE
+		bool "No low-level debugging UART"
+		help
+		  Say Y here if your platform doesn't provide a UART option
+		  below. This relies on your platform choosing the right UART
+		  definition internally in order for low-level debugging to
+		  work.
+
+	config DEBUG_ICEDCC
+		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the EmbeddedICE macrocell's DCC channel using
+		  co-processor 14. This is known to work on the ARM9 style ICE
+		  channel and on the XScale with the PEEDI.
+
+		  Note that the system will appear to hang during boot if there
+		  is nothing connected to read from the DCC.
+
+	config DEBUG_FOOTBRIDGE_COM1
+		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+		depends on FOOTBRIDGE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the 8250 at PCI COM1.
+
+	config DEBUG_DC21285_PORT
+		bool "Kernel low-level debugging messages via footbridge serial port"
+		depends on FOOTBRIDGE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port in the DC21285 (Footbridge).
+
+	config DEBUG_CLPS711X_UART1
+		bool "Kernel low-level debugging messages via UART1"
+		depends on ARCH_CLPS711X
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the first serial port on these devices.
+
+	config DEBUG_CLPS711X_UART2
+		bool "Kernel low-level debugging messages via UART2"
+		depends on ARCH_CLPS711X
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the second serial port on these devices.
+
+	config DEBUG_HIGHBANK_UART
+		bool "Kernel low-level debugging messages via Highbank UART"
+		depends on ARCH_HIGHBANK
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the UART on Highbank based devices.
+
+	config DEBUG_IMX1_UART
+		bool "i.MX1 Debug UART"
+		depends on SOC_IMX1
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX1.
+
+	config DEBUG_IMX23_UART
+		bool "i.MX23 Debug UART"
+		depends on SOC_IMX23
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX23.
+
+	config DEBUG_IMX25_UART
+		bool "i.MX25 Debug UART"
+		depends on SOC_IMX25
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX25.
+
+	config DEBUG_IMX21_IMX27_UART
+		bool "i.MX21 and i.MX27 Debug UART"
+		depends on SOC_IMX21 || SOC_IMX27
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX21 or i.MX27.
+
+	config DEBUG_IMX28_UART
+		bool "i.MX28 Debug UART"
+		depends on SOC_IMX28
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX28.
+
+	config DEBUG_IMX31_IMX35_UART
+		bool "i.MX31 and i.MX35 Debug UART"
+		depends on SOC_IMX31 || SOC_IMX35
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX31 or i.MX35.
+
+	config DEBUG_IMX51_UART
+		bool "i.MX51 Debug UART"
+		depends on SOC_IMX51
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX51.
+
+	config DEBUG_IMX50_IMX53_UART
+		bool "i.MX50 and i.MX53 Debug UART"
+		depends on SOC_IMX50 || SOC_IMX53
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX50 or i.MX53.
+
+	config DEBUG_IMX6Q_UART
+		bool "i.MX6Q Debug UART"
+		depends on SOC_IMX6Q
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6Q.
+
+	config DEBUG_S3C_UART0
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 0 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART1
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 1 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART2
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 2 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_REALVIEW_STD_PORT
+		bool "RealView Default UART"
+		depends on ARCH_REALVIEW
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on RealView EB, PB11MP, PBA8
+		  and PBX platforms.
+
+	config DEBUG_REALVIEW_PB1176_PORT
+		bool "RealView PB1176 UART"
+		depends on MACH_REALVIEW_PB1176
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the standard serial port on the RealView
+		  PB1176 platform.
+
+	config DEBUG_BCM2708_UART0
+		bool "Broadcom BCM2708 UART0 (PL011)"
+		depends on MACH_BCM2708
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
+endchoice
+
 config EARLY_PRINTK
 	bool "Early printk"
 	depends on DEBUG_LL

arch/arm/Makefile

@@ -196,6 +196,7 @@ machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx
 machine-$(CONFIG_MACH_SPEAR600)		:= spear6xx
 machine-$(CONFIG_ARCH_ZYNQ)		:= zynq
+machine-$(CONFIG_ARCH_BCM2708)		:= bcm2708
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.

arch/arm/configs/bcmrpi_cutdown_defconfig

@@ -0,0 +1,552 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="-cutdown"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_TINY_RCU=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SCHED_AUTOGROUP=y
+# CONFIG_UID16 is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_BCM2708=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6_PRIVACY=y
+CONFIG_NET_PKTGEN=m
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRTTY_SIR=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_MESH=y
+CONFIG_WIMAX=m
+CONFIG_NET_9P=m
+CONFIG_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_MISC_DEVICES=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_MAC80211_HWSIM=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_B43=m
+CONFIG_B43LEGACY=m
+CONFIG_HOSTAP=m
+CONFIG_IWM=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RTL8192CU=m
+CONFIG_WL1251=m
+CONFIG_WL12XX_MENU=m
+CONFIG_ZD1211RW=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_PPP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_NETCONSOLE=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_SERIO=m
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BCM2708_WDT=m
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_VIDEO_DEV=m
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_HDPVR=m
+CONFIG_USB_PWC=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_BCM2835=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=m
+CONFIG_USB_DWCOTG=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_BCM2708=y
+CONFIG_MMC_SDHCI_BCM2708_DMA=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_9P_FS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y

arch/arm/configs/bcmrpi_defconfig

@@ -0,0 +1,894 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_TINY_RCU=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_BCM2708=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
+CONFIG_KEXEC=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6_PRIVACY=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XT_SET=m
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_SET=m
+CONFIG_IP_SET_BITMAP_IP=m
+CONFIG_IP_SET_BITMAP_IPMAC=m
+CONFIG_IP_SET_BITMAP_PORT=m
+CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPPORT=m
+CONFIG_IP_SET_HASH_IPPORTIP=m
+CONFIG_IP_SET_HASH_IPPORTNET=m
+CONFIG_IP_SET_HASH_NET=m
+CONFIG_IP_SET_HASH_NETPORT=m
+CONFIG_IP_SET_HASH_NETIFACE=m
+CONFIG_IP_SET_LIST_SET=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_NET_PKTGEN=m
+CONFIG_HAMRADIO=y
+CONFIG_AX25=m
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_YAM=m
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRTTY_SIR=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_MESH=y
+CONFIG_WIMAX=m
+CONFIG_NET_9P=m
+CONFIG_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_DEVTMPFS=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_MISC_DEVICES=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_DELAY=m
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_TUN=m
+CONFIG_PHYLIB=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_MAC80211_HWSIM=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_B43=m
+CONFIG_B43_PHY_N=y
+CONFIG_B43LEGACY=m
+CONFIG_HOSTAP=m
+CONFIG_IWM=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RTL8192CU=m
+CONFIG_WL1251=m
+CONFIG_WL12XX_MENU=m
+CONFIG_ZD1211RW=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_NETCONSOLE=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_SERIO=m
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_TTY_PRINTK=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_BCM2708=m
+CONFIG_SPI=y
+CONFIG_SPI_BCM2708=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_W1=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_MASTER_DS1WM=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2408=m
+CONFIG_W1_SLAVE_DS2423=m
+CONFIG_W1_SLAVE_DS2431=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_W1_SLAVE_DS2780=m
+CONFIG_W1_SLAVE_BQ27000=m
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BCM2708_WDT=m
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_VIDEO_DEV=m
+CONFIG_DVB_CORE=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_TLG2300=m
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_USB_ET61X251=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_PWC=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_SI470X=y
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
+CONFIG_DVB_USB=m
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_SMS_SIANO_MDTV=m
+CONFIG_SMS_USB_DRV=m
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_BCM2835=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=m
+CONFIG_USB_DWCOTG=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_BCM2708=y
+CONFIG_MMC_SDHCI_BCM2708_DMA=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_STAGING=y
+CONFIG_W35UND=m
+CONFIG_PRISM2_USB=m
+CONFIG_R8712U=m
+CONFIG_R8712_AP=y
+CONFIG_ZRAM=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FANOTIFY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_FSCACHE_HISTOGRAM=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+CONFIG_NFSD=m
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_9P_FS=m
+CONFIG_9P_FS_POSIX_ACL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_PREEMPT_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_STACK_TRACER=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_KGDB=y
+CONFIG_KGDB_KDB=y
+CONFIG_KDB_KEYBOARD=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y

arch/arm/configs/bcmrpi_emergency_defconfig

@@ -0,0 +1,532 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../target_fs"
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_BCM2708=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_AEABI=y
+CONFIG_SECCOMP=y
+CONFIG_CC_STACKPROTECTOR=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext3 rootwait"
+CONFIG_KEXEC=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NET_PKTGEN=m
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRTTY_SIR=m
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_MESH=y
+CONFIG_WIMAX=m
+CONFIG_NET_9P=m
+CONFIG_NFC=m
+CONFIG_NFC_PN533=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_MISC_DEVICES=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_MD=y
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=m
+CONFIG_MDIO_BITBANG=m
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_MAC80211_HWSIM=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_B43=m
+CONFIG_B43LEGACY=m
+CONFIG_HOSTAP=m
+CONFIG_IWM=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RTL8192CU=m
+CONFIG_WL1251=m
+CONFIG_WL12XX_MENU=m
+CONFIG_ZD1211RW=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_WIMAX_I2400M_USB=m
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_USB_NET_CX82310_ETH=m
+CONFIG_USB_NET_KALMIA=m
+CONFIG_USB_NET_INT51X1=m
+CONFIG_USB_IPHETH=m
+CONFIG_USB_SIERRA_NET=m
+CONFIG_USB_VL600=m
+CONFIG_PPP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_NETCONSOLE=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_SERIO=m
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BCM2708_WDT=m
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_ALOOP=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_BCM2835=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_UA101=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_6FIRE=m
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_ACRUX=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_HID_EMS_FF=m
+CONFIG_HID_ELECOM=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_HOLTEK=m
+CONFIG_HID_KEYTOUCH=m
+CONFIG_HID_KYE=m
+CONFIG_HID_UCLOGIC=m
+CONFIG_HID_WALTOP=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LCPOWER=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MAGICMOUSE=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_ORTEK=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_PICOLCD=m
+CONFIG_HID_QUANTA=m
+CONFIG_HID_ROCCAT=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SPEEDLINK=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_HID_WACOM=m
+CONFIG_HID_WIIMOTE=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_HID_ZYDACRON=m
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=m
+CONFIG_USB_DWCOTG=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_STORAGE_ENE_UB6250=m
+CONFIG_USB_UAS=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_QCAUX=m
+CONFIG_USB_SERIAL_QUALCOMM=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_SYMBOL=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
+CONFIG_USB_SERIAL_ZIO=m
+CONFIG_USB_SERIAL_SSU100=m
+CONFIG_USB_SERIAL_DEBUG=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_YUREX=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_BCM2708=y
+CONFIG_MMC_SDHCI_BCM2708_DMA=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_JFS_STATISTICS=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
+CONFIG_GFS2_FS=m
+CONFIG_OCFS2_FS=m
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_FANOTIFY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_FSCACHE_HISTOGRAM=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_9P_FS=m
+CONFIG_9P_FS_POSIX_ACL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_STACK_TRACER=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_KGDB=y
+CONFIG_KGDB_KDB=y
+CONFIG_KDB_KEYBOARD=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y

arch/arm/configs/ezx_defconfig

@@ -287,7 +287,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y

arch/arm/configs/imote2_defconfig

@@ -263,7 +263,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y

arch/arm/configs/magician_defconfig

@@ -132,7 +132,7 @@ CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m

arch/arm/configs/zeus_defconfig

@@ -140,7 +140,7 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m

arch/arm/kernel/head.S

@@ -356,7 +356,7 @@ __secondary_data:
  *  r13 = *virtual* address to jump to upon completion
  */
 __enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
 	orr	r0, r0, #CR_A
 #else
 	bic	r0, r0, #CR_A

arch/arm/kernel/process.c

@@ -192,6 +192,9 @@ void cpu_idle(void)
 #endif
 
 			local_irq_disable();
+#ifdef CONFIG_PL310_ERRATA_769419
+			wmb();
+#endif
 			if (hlt_counter) {
 				local_irq_enable();
 				cpu_relax();

arch/arm/kernel/setup.c

@@ -890,6 +890,12 @@ void __init setup_arch(char **cmdline_p)
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
+#ifdef CONFIG_ZONE_DMA
+	if (mdesc->dma_zone_size) {
+		extern unsigned long arm_dma_zone_size;
+		arm_dma_zone_size = mdesc->dma_zone_size;
+	}
+#endif
 	if (mdesc->soft_reboot)
 		reboot_setup("s");
 
@@ -920,12 +926,6 @@ void __init setup_arch(char **cmdline_p)
 
 	tcm_init();
 
-#ifdef CONFIG_ZONE_DMA
-	if (mdesc->dma_zone_size) {
-		extern unsigned long arm_dma_zone_size;
-		arm_dma_zone_size = mdesc->dma_zone_size;
-	}
-#endif
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	handle_arch_irq = mdesc->handle_irq;
 #endif

arch/arm/mach-at91/at91cap9_devices.c

@@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {

arch/arm/mach-at91/at91rm9200_devices.c

@@ -75,7 +75,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

arch/arm/mach-at91/at91sam9260.c

@@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
-	CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
-	CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
 };
 

arch/arm/mach-at91/at91sam9260_devices.c

@@ -76,7 +76,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

arch/arm/mach-at91/at91sam9261_devices.c

@@ -79,7 +79,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

arch/arm/mach-at91/at91sam9263_devices.c

@@ -86,7 +86,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -191,7 +191,7 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 static struct resource usba_udc_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_UDPHS_FIFO,

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -75,7 +75,7 @@ void __init at91_add_device_hdmac(void) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {

arch/arm/mach-bcm2708/Kconfig

@@ -0,0 +1,32 @@
+menu "Broadcom BCM2708 Implementations"
+	depends on ARCH_BCM2708
+
+config MACH_BCM2708
+	bool "Broadcom BCM2708 Development Platform"
+	select CPU_V6
+	help
+	  Include support for the Broadcom(R) BCM2708 platform.
+
+config BCM2708_GPIO
+	bool "BCM2708 gpio support"
+	depends on MACH_BCM2708
+	select ARCH_REQUIRE_GPIOLIB
+        default y
+	help
+	  Include support for the Broadcom(R) BCM2708 gpio.
+
+config BCM2708_VCMEM
+	bool "Videocore Memory"
+	depends on MACH_BCM2708
+        default y
+        help
+          Helper for videocore memory access and total size allocation.	   
+
+config BCM2708_NOL2CACHE
+	bool "Videocore L2 cache disable"
+	depends on MACH_BCM2708
+        default n
+        help
+          Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt.
+
+endmenu

arch/arm/mach-bcm2708/Makefile

@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-$(CONFIG_MACH_BCM2708) 	+= clock.o bcm2708.o armctrl.o vcio.o power.o dma.o
+obj-$(CONFIG_BCM2708_GPIO)	+= bcm2708_gpio.o
+obj-$(CONFIG_BCM2708_VCMEM)	+= vc_mem.o
+

arch/arm/mach-bcm2708/Makefile.boot

@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000

arch/arm/mach-bcm2708/armctrl.c

@@ -0,0 +1,399 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/armctrl.c
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/version.h>
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39)
+#include <linux/syscore_ops.h>
+#else
+#include <linux/sysdev.h>
+#endif
+#include <linux/interrupt.h>
+
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include "armctrl.h"
+
+/* For support of kernels >= 3.0 assume only one VIC for now*/
+static unsigned int remap_irqs[(INTERRUPT_ARASANSDIO + 1) - INTERRUPT_JPEG] = {
+	INTERRUPT_VC_JPEG,
+	INTERRUPT_VC_USB,
+	INTERRUPT_VC_3D,
+	INTERRUPT_VC_DMA2,
+	INTERRUPT_VC_DMA3,
+	INTERRUPT_VC_I2C,
+	INTERRUPT_VC_SPI,
+	INTERRUPT_VC_I2SPCM,
+	INTERRUPT_VC_SDIO,
+	INTERRUPT_VC_UART,
+	INTERRUPT_VC_ARASANSDIO
+};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+static void armctrl_mask_irq(struct irq_data *d)
+#else
+static void armctrl_mask_irq(unsigned int irq)
+#endif
+{
+	static const unsigned int disables[4] = {
+		IO_ADDRESS(ARM_IRQ_DIBL1),
+		IO_ADDRESS(ARM_IRQ_DIBL2),
+		IO_ADDRESS(ARM_IRQ_DIBL3),
+		0
+	};
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+	unsigned int data = (unsigned int)irq_get_chip_data(d->irq);
+#else
+	unsigned int data = (unsigned int)get_irq_chip_data(irq);
+#endif
+	writel(1 << (data & 0x1f), __io(disables[(data >> 5) & 0x3]));
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+static void armctrl_unmask_irq(struct irq_data *d)
+#else
+static void armctrl_unmask_irq(unsigned int irq)
+#endif
+{
+	static const unsigned int enables[4] = {
+		IO_ADDRESS(ARM_IRQ_ENBL1),
+		IO_ADDRESS(ARM_IRQ_ENBL2),
+		IO_ADDRESS(ARM_IRQ_ENBL3),
+		0
+	};
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+	unsigned int data = (unsigned int)irq_get_chip_data(d->irq);
+#else
+	unsigned int data = (unsigned int)get_irq_chip_data(irq);
+#endif
+	writel(1 << (data & 0x1f), __io(enables[(data >> 5) & 0x3]));
+}
+
+#if defined(CONFIG_PM)
+
+/* for kernels 3.xx use the new syscore_ops apis but for older kernels use the sys dev class */
+
+/* Static defines
+ * struct armctrl_device - VIC PM device (< 3.xx)
+ * @sysdev: The system device which is registered. (< 3.xx)
+ * @irq: The IRQ number for the base of the VIC.
+ * @base: The register base for the VIC.
+ * @resume_sources: A bitmask of interrupts for resume.
+ * @resume_irqs: The IRQs enabled for resume.
+ * @int_select: Save for VIC_INT_SELECT.
+ * @int_enable: Save for VIC_INT_ENABLE.
+ * @soft_int: Save for VIC_INT_SOFT.
+ * @protect: Save for VIC_PROTECT.
+ */
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39)
+struct armctrl_device {
+	struct sys_device sysdev;
+#else
+	struct armctrl_info {
+#endif
+		void __iomem *base;
+		int irq;
+		u32 resume_sources;
+		u32 resume_irqs;
+		u32 int_select;
+		u32 int_enable;
+		u32 soft_int;
+		u32 protect;
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39)
+};
+#else
+	} armctrl;
+#endif
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39)
+
+static struct armctrl_device armctrl_devices[1];
+
+static inline struct armctrl_device *to_vic(struct sys_device *sys)
+{
+	return container_of(sys, struct armctrl_device, sysdev);
+}
+
+static int armctrl_id;
+
+static int armctrl_class_resume(struct sys_device *dev)
+{
+#if 0  // FIXME
+	struct armctrl_device *armctrl = to_vic(dev);
+	void __iomem *base = armctrl->base;
+
+	printk(KERN_DEBUG "%s: resuming armctrl at %p\n", __func__, base);
+
+	writel(armctrl->int_select, base + VIC_INT_SELECT);
+	writel(armctrl->protect, base + VIC_PROTECT);
+
+	/* set the enabled ints and then clear the non-enabled */
+	writel(armctrl->int_enable, base + VIC_INT_ENABLE);
+	writel(~armctrl->int_enable, base + VIC_INT_ENABLE_CLEAR);
+
+	/* and the same for the soft-int register */
+
+	writel(armctrl->soft_int, base + VIC_INT_SOFT);
+	writel(~armctrl->soft_int, base + VIC_INT_SOFT_CLEAR);
+#endif
+	return 0;
+}
+
+static int armctrl_class_suspend(struct sys_device *dev, pm_message_t state)
+{
+#if 0				// FIXME
+	struct armctrl_device *armctrl = to_vic(dev);
+	void __iomem *base = armctrl->base;
+
+	printk(KERN_DEBUG "%s: suspending armctrl at %p\n", __func__, base);
+
+	armctrl->int_select = readl(base + VIC_INT_SELECT);
+	armctrl->int_enable = readl(base + VIC_INT_ENABLE);
+	armctrl->soft_int = readl(base + VIC_INT_SOFT);
+	armctrl->protect = readl(base + VIC_PROTECT);
+
+	/* set the interrupts (if any) that are used for
+	 * resuming the system */
+
+	writel(armctrl->resume_irqs, base + VIC_INT_ENABLE);
+	writel(~armctrl->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+#endif
+	return 0;
+}
+
+struct sysdev_class armctrl_class = {
+	.name = "armctrl",
+	.suspend = armctrl_class_suspend,
+	.resume = armctrl_class_resume,
+};
+
+#endif // < 2.6.39
+
+static int armctrl_suspend(void)
+{
+	return 0;
+}
+
+static void armctrl_resume(void)
+{
+	return;
+}
+
+
+/**
+ * armctrl_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * For older kernels (< 3.xx) do -
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init armctrl_pm_register(void __iomem * base, unsigned int irq,
+				       u32 resume_sources)
+{
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39)
+	struct armctrl_device *v;
+
+	if (armctrl_id >= ARRAY_SIZE(armctrl_devices))
+		printk(KERN_ERR
+		       "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n",
+		       __func__);
+	else {
+		v = &armctrl_devices[armctrl_id];
+		v->base = base;
+		v->resume_sources = resume_sources;
+		v->irq = irq;
+		armctrl_id++;
+	}
+#else
+	armctrl.base = base;
+	armctrl.resume_sources = resume_sources;
+	armctrl.irq = irq;
+#endif
+}
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39)
+
+/**
+ * armctrl_pm_init - initicall to register VIC pm
+ *
+ * This is called via late_initcall() to register
+ * the resources for the VICs due to the early
+ * nature of the VIC's registration.
+*/
+static int __init armctrl_pm_init(void)
+{
+	struct armctrl_device *dev = armctrl_devices;
+	int err;
+	int id;
+
+	if (armctrl_id == 0)
+		return 0;
+
+	err = sysdev_class_register(&armctrl_class);
+	if (err) {
+		printk(KERN_ERR "%s: cannot register class\n", __func__);
+		return err;
+	}
+
+	for (id = 0; id < armctrl_id; id++, dev++) {
+		dev->sysdev.id = id;
+		dev->sysdev.cls = &armctrl_class;
+
+		err = sysdev_register(&dev->sysdev);
+		if (err) {
+			printk(KERN_ERR "%s: failed to register device\n",
+			       __func__);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+late_initcall(armctrl_pm_init);
+
+#endif // VERSION check
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+static int armctrl_set_wake(struct irq_data *d, unsigned int on)
+#else
+static int armctrl_set_wake(unsigned int irq, unsigned int on)
+#endif
+{
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39)
+	struct armctrl_device *armctrl = &armctrl_devices[0];
+#endif
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+	unsigned int off = d->irq & 31;
+#else
+	unsigned int off = irq & 31;
+#endif
+	u32 bit = 1 << off;
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,39)
+	if (!armctrl)
+		return -EINVAL;
+
+	if (!(bit & armctrl->resume_sources))
+		return -EINVAL;
+
+	if (on)
+		armctrl->resume_irqs |= bit;
+	else
+		armctrl->resume_irqs &= ~bit;
+#else
+	if (!(bit & armctrl.resume_sources))
+		return -EINVAL;
+
+	if (on)
+		armctrl.resume_irqs |= bit;
+	else
+		armctrl.resume_irqs &= ~bit;
+#endif
+
+	return 0;
+}
+
+#else
+static inline void armctrl_pm_register(void __iomem *base, unsigned int irq,
+				       u32 arg1)
+{
+}
+#define armctrl_suspend NULL
+#define armctrl_resume NULL
+#define armctrl_set_wake NULL
+#endif /* CONFIG_PM */
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39)
+
+static struct syscore_ops armctrl_syscore_ops = {
+	.suspend = armctrl_suspend,
+        .resume = armctrl_resume,
+};
+
+/**
+ * armctrl_syscore_init - initicall to register VIC pm functions
+ *
+ * This is called via late_initcall() to register
+ * the resources for the VICs due to the early
+ * nature of the VIC's registration.
+*/
+static int __init armctrl_syscore_init(void)
+{
+	register_syscore_ops(&armctrl_syscore_ops);
+	return 0;
+}
+
+late_initcall(armctrl_syscore_init);
+
+#endif
+
+static struct irq_chip armctrl_chip = {
+	.name = "ARMCTRL",
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+	.irq_ack = armctrl_mask_irq,
+	.irq_mask = armctrl_mask_irq,
+	.irq_unmask = armctrl_unmask_irq,
+	.irq_set_wake = armctrl_set_wake,
+#else
+	.ack = armctrl_mask_irq,
+	.mask = armctrl_mask_irq,
+	.unmask = armctrl_unmask_irq,
+	.set_wake = armctrl_set_wake,
+#endif
+};
+
+/**
+ * armctrl_init - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @armctrl_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+int __init armctrl_init(void __iomem * base, unsigned int irq_start,
+			u32 armctrl_sources, u32 resume_sources)
+{
+	unsigned int irq;
+
+	for (irq = 0; irq < NR_IRQS; irq++) {
+		unsigned int data = irq;
+		if (irq >= INTERRUPT_JPEG)
+			data = remap_irqs[irq - INTERRUPT_JPEG];
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)
+		irq_set_chip(irq, &armctrl_chip);
+		irq_set_chip_data(irq, (void *)data);
+		irq_set_handler(irq, handle_level_irq);
+#else
+		set_irq_chip(irq, &armctrl_chip);
+		set_irq_chip_data(irq, (void *)data);
+		set_irq_handler(irq, handle_level_irq);
+#endif
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_DISABLED);
+	}
+
+	armctrl_pm_register(base, irq_start, resume_sources);
+	return 0;
+}

arch/arm/mach-bcm2708/armctrl.h

@@ -0,0 +1,27 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/armctrl.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __BCM2708_ARMCTRL_H
+#define __BCM2708_ARMCTRL_H
+
+extern int __init armctrl_init(void __iomem * base, unsigned int irq_start,
+			       u32 armctrl_sources, u32 resume_sources);
+
+#endif

arch/arm/mach-bcm2708/bcm2708.c

@@ -0,0 +1,769 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/bcm2708.c
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/clockchips.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include <linux/version.h>
+#include <linux/clkdev.h>
+#include <asm/system.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/sched_clock.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/timex.h>
+#include <mach/dma.h>
+#include <mach/vcio.h>
+#include <mach/system.h>
+
+#include "bcm2708.h"
+#include "armctrl.h"
+#include "clock.h"
+
+/* Effectively we have an IOMMU (ARM<->VideoCore map) that is set up to
+ * give us IO access only to 64Mbytes of physical memory (26 bits).  We could
+ * represent this window by setting our dmamasks to 26 bits but, in fact
+ * we're not going to use addresses outside this range (they're not in real
+ * memory) so we don't bother.
+ *
+ * In the future we might include code to use this IOMMU to remap other
+ * physical addresses onto VideoCore memory then the use of 32-bits would be
+ * more legitimate.
+ */
+#define DMA_MASK_BITS_COMMON 32
+
+static DEFINE_CLOCK_DATA(cd);
+
+/* command line parameters */
+static unsigned boardrev, serial;
+
+static void __init bcm2708_init_led(void);
+
+void __init bcm2708_init_irq(void)
+{
+	armctrl_init(__io_address(ARMCTRL_IC_BASE), 0, 0, 0);
+}
+
+static struct map_desc bcm2708_io_desc[] __initdata = {
+	{
+	 .virtual = IO_ADDRESS(ARMCTRL_BASE),
+	 .pfn = __phys_to_pfn(ARMCTRL_BASE),
+	 .length = SZ_4K,
+	 .type = MT_DEVICE},
+	{
+	 .virtual = IO_ADDRESS(UART0_BASE),
+	 .pfn = __phys_to_pfn(UART0_BASE),
+	 .length = SZ_4K,
+	 .type = MT_DEVICE},
+	{
+	 .virtual = IO_ADDRESS(UART1_BASE),
+	 .pfn = __phys_to_pfn(UART1_BASE),
+	 .length = SZ_4K,
+	 .type = MT_DEVICE},
+#ifdef CONFIG_MMC_BCM2708	/* broadcom legacy SD */
+	{
+	 .virtual = IO_ADDRESS(MMCI0_BASE),
+	 .pfn = __phys_to_pfn(MMCI0_BASE),
+	 .length = SZ_4K,
+	 .type = MT_DEVICE},
+#endif
+	{
+	 .virtual = IO_ADDRESS(DMA_BASE),
+	 .pfn = __phys_to_pfn(DMA_BASE),
+	 .length = SZ_4K,
+	 .type = MT_DEVICE},
+	{
+	 .virtual = IO_ADDRESS(MCORE_BASE),
+	 .pfn = __phys_to_pfn(MCORE_BASE),
+	 .length = SZ_4K,
+	 .type = MT_DEVICE},
+	{
+	 .virtual = IO_ADDRESS(ST_BASE),
+	 .pfn = __phys_to_pfn(ST_BASE),
+	 .length = SZ_4K,
+	 .type = MT_DEVICE},
+	{
+	 .virtual = IO_ADDRESS(USB_BASE),
+	 .pfn = __phys_to_pfn(USB_BASE),
+	 .length = SZ_128K,
+	 .type = MT_DEVICE},
+	{
+	 .virtual = IO_ADDRESS(PM_BASE),
+	 .pfn = __phys_to_pfn(PM_BASE),
+	 .length = SZ_4K,
+	 .type = MT_DEVICE},
+	{
+	 .virtual = IO_ADDRESS(GPIO_BASE),
+	 .pfn = __phys_to_pfn(GPIO_BASE),
+	 .length = SZ_4K,
+	 .type = MT_DEVICE}
+};
+
+void __init bcm2708_map_io(void)
+{
+	iotable_init(bcm2708_io_desc, ARRAY_SIZE(bcm2708_io_desc));
+}
+
+/* The STC is a free running counter that increments at the rate of 1MHz */
+#define STC_FREQ_HZ 1000000
+
+/*
+ * Constants generated by clocks_calc_mult_shift(m, s, 1MHz, NSEC_PER_SEC, 60).
+ * This gives a resolution of about 1us and a wrap period of about 1h11min.
+ */
+#define SC_MULT		4194304000u
+#define SC_SHIFT	22
+
+static cycle_t stc_read_cycles(struct clocksource *cs)
+{
+	/* STC: a free running counter that increments at the rate of 1MHz */
+	return (cycle_t) readl(__io_address(ST_BASE + 0x04));
+}
+
+static struct clocksource clocksource_stc = {
+	.name = "stc",
+	.rating = 300,
+	.read = stc_read_cycles,
+	.mask = CLOCKSOURCE_MASK(32),
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+unsigned long frc_clock_ticks32(void)
+{
+	return (unsigned long)stc_read_cycles(&clocksource_stc);
+}
+
+static void __init bcm2708_clocksource_init(void)
+{
+	if (clocksource_register_hz(&clocksource_stc, STC_FREQ_HZ)) {
+		printk(KERN_ERR "timer: failed to initialize clock "
+		       "source %s\n", clocksource_stc.name);
+	}
+}
+
+unsigned long long sched_clock(void)
+{
+	u32 cyc = clocksource_stc.read(&clocksource_stc);
+	return cyc_to_fixed_sched_clock(&cd, cyc, clocksource_stc.mask,
+			SC_MULT, SC_SHIFT);
+}
+
+static void notrace bcm2708_update_sched_clock(void)
+{
+	u32 cyc = clocksource_stc.read(&clocksource_stc);
+	update_sched_clock(&cd, cyc, clocksource_stc.mask);
+}
+
+/*
+ * These are fixed clocks.
+ */
+static struct clk ref24_clk = {
+	.rate = UART0_CLOCK,	/* The UART is clocked at 3MHz via APB_CLK */
+};
+
+static struct clk osc_clk = {
+#ifdef CONFIG_ARCH_BCM2708_CHIPIT
+	.rate = 27000000,
+#else
+	.rate = 500000000,	/* ARM clock is set from the VideoCore booter */
+#endif
+};
+
+/* warning - the USB needs a clock > 34MHz */
+
+static struct clk sdhost_clk = {
+#ifdef CONFIG_ARCH_BCM2708_CHIPIT
+	.rate = 4000000,	/* 4MHz */
+#else
+	.rate = 250000000,	/* 250MHz */
+#endif
+};
+
+static struct clk_lookup lookups[] = {
+	{			/* UART0 */
+	 .dev_id = "dev:f1",
+	 .clk = &ref24_clk,
+	 },
+	{			/* USB */
+	 .dev_id = "bcm2708_usb",
+	 .clk = &osc_clk,
+#ifdef CONFIG_MMC_BCM2708
+	 },
+	{			/* MCI */
+	 .dev_id = "bcm2708_mci.0",
+	 .clk = &sdhost_clk,
+#endif
+	 }, {	/* SPI */
+		 .dev_id = "bcm2708_spi.0",
+		 .clk = &sdhost_clk,
+	 }, {	/* BSC0 */
+		 .dev_id = "bcm2708_i2c.0",
+		 .clk = &sdhost_clk,
+	 }, {	/* BSC1 */
+		 .dev_id = "bcm2708_i2c.1",
+		 .clk = &sdhost_clk,
+	 }
+};
+
+#define UART0_IRQ	{ IRQ_UART, NO_IRQ }
+#define UART0_DMA	{ 15, 14 }
+
+AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+};
+
+static struct resource bcm2708_dmaman_resources[] = {
+	{
+	 .start = DMA_BASE,
+	 .end = DMA_BASE + SZ_4K - 1,
+	 .flags = IORESOURCE_MEM,
+	 }
+};
+
+static struct platform_device bcm2708_dmaman_device = {
+	.name = BCM_DMAMAN_DRIVER_NAME,
+	.id = 0,		/* first bcm2708_dma */
+	.resource = bcm2708_dmaman_resources,
+	.num_resources = ARRAY_SIZE(bcm2708_dmaman_resources),
+};
+
+#ifdef CONFIG_MMC_BCM2708
+static struct resource bcm2708_mci_resources[] = {
+	{
+	 .start = MMCI0_BASE,
+	 .end = MMCI0_BASE + SZ_4K - 1,
+	 .flags = IORESOURCE_MEM,
+	 },
+	{
+	 .start = IRQ_SDIO,
+	 .end = IRQ_SDIO,
+	 .flags = IORESOURCE_IRQ,
+	 }
+};
+
+static struct platform_device bcm2708_mci_device = {
+	.name = "bcm2708_mci",
+	.id = 0,		/* first bcm2708_mci */
+	.resource = bcm2708_mci_resources,
+	.num_resources = ARRAY_SIZE(bcm2708_mci_resources),
+	.dev = {
+		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
+		},
+};
+#endif /* CONFIG_MMC_BCM2708 */
+
+static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
+
+static struct platform_device bcm2708_fb_device = {
+	.name = "bcm2708_fb",
+	.id = -1,		/* only one bcm2708_fb */
+	.resource = NULL,
+	.num_resources = 0,
+	.dev = {
+		.dma_mask = &fb_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
+		},
+};
+
+static struct plat_serial8250_port bcm2708_uart1_platform_data[] = {
+	{
+	 .mapbase = UART1_BASE + 0x40,
+	 .irq = IRQ_AUX,
+	 .uartclk = 125000000,
+	 .regshift = 2,
+	 .iotype = UPIO_MEM,
+	 .flags = UPF_FIXED_TYPE | UPF_IOREMAP | UPF_SKIP_TEST,
+	 .type = PORT_8250,
+	 },
+	{},
+};
+
+static struct platform_device bcm2708_uart1_device = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = bcm2708_uart1_platform_data,
+		},
+};
+
+static struct resource bcm2708_usb_resources[] = {
+	[0] = {
+	       .start = USB_BASE,
+	       .end = USB_BASE + SZ_128K - 1,
+	       .flags = IORESOURCE_MEM,
+	       },
+	[1] = {
+	       .start = IRQ_USB,
+	       .end = IRQ_USB,
+	       .flags = IORESOURCE_IRQ,
+	       },
+};
+
+static u64 usb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
+
+static struct platform_device bcm2708_usb_device = {
+	.name = "bcm2708_usb",
+	.id = -1,		/* only one bcm2708_usb */
+	.resource = bcm2708_usb_resources,
+	.num_resources = ARRAY_SIZE(bcm2708_usb_resources),
+	.dev = {
+		.dma_mask = &usb_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
+		},
+};
+
+static struct resource bcm2708_vcio_resources[] = {
+	[0] = {			/* mailbox/semaphore/doorbell access */
+	       .start = MCORE_BASE,
+	       .end = MCORE_BASE + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	       },
+};
+
+static u64 vcio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
+
+static struct platform_device bcm2708_vcio_device = {
+	.name = BCM_VCIO_DRIVER_NAME,
+	.id = -1,		/* only one VideoCore I/O area */
+	.resource = bcm2708_vcio_resources,
+	.num_resources = ARRAY_SIZE(bcm2708_vcio_resources),
+	.dev = {
+		.dma_mask = &vcio_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
+		},
+};
+
+#ifdef CONFIG_BCM2708_GPIO
+#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio"
+
+static struct resource bcm2708_gpio_resources[] = {
+	[0] = {			/* general purpose I/O */
+	       .start = GPIO_BASE,
+	       .end = GPIO_BASE + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	       },
+};
+
+static u64 gpio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
+
+static struct platform_device bcm2708_gpio_device = {
+	.name = BCM_GPIO_DRIVER_NAME,
+	.id = -1,		/* only one VideoCore I/O area */
+	.resource = bcm2708_gpio_resources,
+	.num_resources = ARRAY_SIZE(bcm2708_gpio_resources),
+	.dev = {
+		.dma_mask = &gpio_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
+		},
+};
+#endif
+
+static struct resource bcm2708_systemtimer_resources[] = {
+	[0] = {			/* system timer access */
+	       .start = ST_BASE,
+	       .end = ST_BASE + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	       },
+	{
+	 .start = IRQ_TIMER3,
+	 .end = IRQ_TIMER3,
+	 .flags = IORESOURCE_IRQ,
+	 }
+
+};
+
+static u64 systemtimer_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
+
+static struct platform_device bcm2708_systemtimer_device = {
+	.name = "bcm2708_systemtimer",
+	.id = -1,		/* only one VideoCore I/O area */
+	.resource = bcm2708_systemtimer_resources,
+	.num_resources = ARRAY_SIZE(bcm2708_systemtimer_resources),
+	.dev = {
+		.dma_mask = &systemtimer_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
+		},
+};
+
+#ifdef CONFIG_MMC_SDHCI_BCM2708	/* Arasan emmc SD */
+static struct resource bcm2708_emmc_resources[] = {
+	[0] = {
+	       .start = EMMC_BASE,
+	       .end = EMMC_BASE + SZ_256 - 1,	/* we only need this area */
+	       /* the memory map actually makes SZ_4K available  */
+	       .flags = IORESOURCE_MEM,
+	       },
+	[1] = {
+	       .start = IRQ_ARASANSDIO,
+	       .end = IRQ_ARASANSDIO,
+	       .flags = IORESOURCE_IRQ,
+	       },
+};
+
+static u64 bcm2708_emmc_dmamask = 0xffffffffUL;
+
+struct platform_device bcm2708_emmc_device = {
+	.name = "bcm2708_sdhci",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bcm2708_emmc_resources),
+	.resource = bcm2708_emmc_resources,
+	.dev = {
+		.dma_mask = &bcm2708_emmc_dmamask,
+		.coherent_dma_mask = 0xffffffffUL},
+};
+#endif /* CONFIG_MMC_SDHCI_BCM2708 */
+
+static struct resource bcm2708_powerman_resources[] = {
+	[0] = {
+	       .start = PM_BASE,
+	       .end = PM_BASE + SZ_256 - 1,
+	       .flags = IORESOURCE_MEM,
+	       },
+};
+
+static u64 powerman_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
+
+struct platform_device bcm2708_powerman_device = {
+	.name = "bcm2708_powerman",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bcm2708_powerman_resources),
+	.resource = bcm2708_powerman_resources,
+	.dev = {
+		.dma_mask = &powerman_dmamask,
+		.coherent_dma_mask = 0xffffffffUL},
+};
+
+static struct platform_device bcm2708_alsa_devices[] = {
+	[0] = {
+	       .name = "bcm2835_AUD0",
+	       .id = 0,		/* first audio device */
+	       .resource = 0,
+	       .num_resources = 0,
+	       },
+};
+
+static struct resource bcm2708_spi_resources[] = {
+	{
+		.start = SPI0_BASE,
+		.end = SPI0_BASE + SZ_256 - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_SPI,
+		.end = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device bcm2708_spi_device = {
+	.name = "bcm2708_spi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bcm2708_spi_resources),
+	.resource = bcm2708_spi_resources,
+};
+
+static struct spi_board_info bcm2708_spi_devices[] = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 500000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.mode = SPI_MODE_0,
+	}, {
+		.modalias = "spidev",
+		.max_speed_hz = 500000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_0,
+	}
+};
+
+static struct resource bcm2708_bsc0_resources[] = {
+	{
+		.start = BSC0_BASE,
+		.end = BSC0_BASE + SZ_256 - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = INTERRUPT_I2C,
+		.end = INTERRUPT_I2C,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device bcm2708_bsc0_device = {
+	.name = "bcm2708_i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bcm2708_bsc0_resources),
+	.resource = bcm2708_bsc0_resources,
+};
+
+
+static struct resource bcm2708_bsc1_resources[] = {
+	{
+		.start = BSC1_BASE,
+		.end = BSC1_BASE + SZ_256 - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = INTERRUPT_I2C,
+		.end = INTERRUPT_I2C,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device bcm2708_bsc1_device = {
+	.name = "bcm2708_i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bcm2708_bsc1_resources),
+	.resource = bcm2708_bsc1_resources,
+};
+
+int __init bcm_register_device(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = platform_device_register(pdev);
+	if (ret)
+		pr_debug("Unable to register platform device '%s': %d\n",
+			 pdev->name, ret);
+
+	return ret;
+}
+
+/* We can't really power off, but if we do the normal reset scheme, and indicate to bootcode.bin not to reboot, then most of the chip will be powered off */
+static void bcm2708_power_off(void)
+{
+	/* we set the watchdog hard reset bit here to distinguish this reset from the normal (full) reset. bootcode.bin will not reboot after a hard reset */
+	uint32_t pm_rsts = readl(IO_ADDRESS(PM_RSTS));
+	pm_rsts = PM_PASSWORD | (pm_rsts & PM_RSTC_WRCFG_CLR) | PM_RSTS_HADWRH_SET;
+	writel(pm_rsts, IO_ADDRESS(PM_RSTS));
+	/* continue with normal reset mechanism */
+	arch_reset(0, "");
+}
+
+void __init bcm2708_init(void)
+{
+	int i;
+
+	pm_power_off = bcm2708_power_off;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	bcm_register_device(&bcm2708_dmaman_device);
+	bcm_register_device(&bcm2708_vcio_device);
+#ifdef CONFIG_BCM2708_GPIO
+	bcm_register_device(&bcm2708_gpio_device);
+#endif
+	bcm_register_device(&bcm2708_systemtimer_device);
+#ifdef CONFIG_MMC_BCM2708
+	bcm_register_device(&bcm2708_mci_device);
+#endif
+	bcm_register_device(&bcm2708_fb_device);
+	bcm_register_device(&bcm2708_usb_device);
+	bcm_register_device(&bcm2708_uart1_device);
+	bcm_register_device(&bcm2708_powerman_device);
+#ifdef CONFIG_MMC_SDHCI_BCM2708
+	bcm_register_device(&bcm2708_emmc_device);
+#endif
+	bcm2708_init_led();
+	for (i = 0; i < ARRAY_SIZE(bcm2708_alsa_devices); i++)
+		bcm_register_device(&bcm2708_alsa_devices[i]);
+
+	bcm_register_device(&bcm2708_spi_device);
+	bcm_register_device(&bcm2708_bsc0_device);
+	bcm_register_device(&bcm2708_bsc1_device);
+
+#ifdef CONFIG_BCM2708_VCMEM
+	{
+		extern void vc_mem_connected_init(void);
+		vc_mem_connected_init();
+	}
+#endif
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+	system_rev = boardrev;
+	system_serial_low = serial;
+
+#ifdef CONFIG_SPI
+	spi_register_board_info(bcm2708_spi_devices,
+			ARRAY_SIZE(bcm2708_spi_devices));
+#endif
+}
+
+#define TIMER_PERIOD DIV_ROUND_CLOSEST(STC_FREQ_HZ, HZ)
+
+static void timer_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *clk)
+{
+	unsigned long stc;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		stc = readl(__io_address(ST_BASE + 0x04));
+		writel(stc + TIMER_PERIOD, __io_address(ST_BASE + 0x18));	/* stc3 */
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		printk(KERN_ERR "timer_set_mode: unhandled mode:%d\n",
+		       (int)mode);
+		break;
+	}
+
+}
+
+static int timer_set_next_event(unsigned long cycles,
+				struct clock_event_device *unused)
+{
+	unsigned long stc;
+
+	stc = readl(__io_address(ST_BASE + 0x04));
+	writel(stc + cycles, __io_address(ST_BASE + 0x18));	/* stc3 */
+	return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+	.name = "timer0",
+	.shift = 32,
+	.features = CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = timer_set_mode,
+	.set_next_event = timer_set_next_event,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t bcm2708_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &timer0_clockevent;
+
+	writel(1 << 3, __io_address(ST_BASE + 0x00));	/* stcs clear timer int */
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction bcm2708_timer_irq = {
+	.name = "BCM2708 Timer Tick",
+	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler = bcm2708_timer_interrupt,
+};
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static void __init bcm2708_timer_init(void)
+{
+	/* init high res timer */
+	bcm2708_clocksource_init();
+
+	/*
+	 * Initialise to a known state (all timers off)
+	 */
+	writel(0, __io_address(ARM_T_CONTROL));
+	/*
+	 * Make irqs happen for the system timer
+	 */
+	setup_irq(IRQ_TIMER3, &bcm2708_timer_irq);
+
+	init_fixed_sched_clock(&cd, bcm2708_update_sched_clock, 32,
+		STC_FREQ_HZ, SC_MULT, SC_SHIFT);
+
+	timer0_clockevent.mult =
+	    div_sc(STC_FREQ_HZ, NSEC_PER_SEC, timer0_clockevent.shift);
+	timer0_clockevent.max_delta_ns =
+	    clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+	timer0_clockevent.min_delta_ns =
+	    clockevent_delta2ns(0xf, &timer0_clockevent);
+
+	timer0_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&timer0_clockevent);
+}
+
+struct sys_timer bcm2708_timer = {
+	.init = bcm2708_timer_init,
+};
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led bcm2708_leds[] = {
+	[0] = {
+	       .gpio = 16,
+	       .name = "led0",
+	       .default_trigger = "mmc0",
+	       .active_low = 1,
+	       },
+};
+
+static struct gpio_led_platform_data bcm2708_led_pdata = {
+	.num_leds = ARRAY_SIZE(bcm2708_leds),
+	.leds = bcm2708_leds,
+};
+
+static struct platform_device bcm2708_led_device = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &bcm2708_led_pdata,
+		},
+};
+
+static void __init bcm2708_init_led(void)
+{
+	platform_device_register(&bcm2708_led_device);
+}
+#else
+static inline void bcm2708_init_led(void)
+{
+}
+#endif
+
+MACHINE_START(BCM2708, "BCM2708")
+    /* Maintainer: Broadcom Europe Ltd. */
+    .map_io = bcm2708_map_io,.init_irq = bcm2708_init_irq,.timer =
+    &bcm2708_timer,.init_machine =
+    bcm2708_init, MACHINE_END module_param(boardrev, uint, 0644);
+module_param(serial, uint, 0644);

arch/arm/mach-bcm2708/bcm2708.h

@@ -0,0 +1,51 @@
+/*
+ * linux/arch/arm/mach-bcm2708/bcm2708.h
+ *
+ * BCM2708 machine support header
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __BCM2708_BCM2708_H
+#define __BCM2708_BCM2708_H
+
+#include <linux/amba/bus.h>
+
+extern void __init bcm2708_init(void);
+extern void __init bcm2708_init_irq(void);
+extern void __init bcm2708_map_io(void);
+extern struct sys_timer bcm2708_timer;
+extern unsigned int mmc_status(struct device *dev);
+
+#define AMBA_DEVICE(name, busid, base, plat)			\
+static struct amba_device name##_device = {			\
+	.dev		= {					\
+		.coherent_dma_mask = ~0,			\
+		.init_name = busid,				\
+		.platform_data = plat,				\
+	},							\
+	.res		= {					\
+		.start	= base##_BASE,		\
+		.end	= (base##_BASE) + SZ_4K - 1,\
+		.flags	= IORESOURCE_MEM,			\
+	},							\
+	.dma_mask	= ~0,					\
+	.irq		= base##_IRQ,				\
+	/* .dma		= base##_DMA,*/				\
+}
+
+#endif

arch/arm/mach-bcm2708/bcm2708_gpio.c

@@ -0,0 +1,339 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/bcm2708_gpio.c
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <mach/platform.h>
+#include <mach/gpio.h>
+
+#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio"
+#define DRIVER_NAME BCM_GPIO_DRIVER_NAME
+#define BCM_GPIO_USE_IRQ 1
+
+#define GPIOFSEL(x)  (0x00+(x)*4)
+#define GPIOSET(x)   (0x1c+(x)*4)
+#define GPIOCLR(x)   (0x28+(x)*4)
+#define GPIOLEV(x)   (0x34+(x)*4)
+#define GPIOEDS(x)   (0x40+(x)*4)
+#define GPIOREN(x)   (0x4c+(x)*4)
+#define GPIOFEN(x)   (0x58+(x)*4)
+#define GPIOHEN(x)   (0x64+(x)*4)
+#define GPIOLEN(x)   (0x70+(x)*4)
+#define GPIOAREN(x)  (0x7c+(x)*4)
+#define GPIOAFEN(x)  (0x88+(x)*4)
+#define GPIOUD(x)    (0x94+(x)*4)
+#define GPIOUDCLK(x) (0x98+(x)*4)
+
+enum { GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT,
+	GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4,
+	GPIO_FSEL_ALT0, GPIO_FSEL_ALT1,
+	GPIO_FSEL_ALT2, GPIO_FSEL_ALT3,
+};
+
+	/* Each of the two spinlocks protects a different set of hardware
+	 * regiters and data structurs. This decouples the code of the IRQ from
+	 * the GPIO code. This also makes the case of a GPIO routine call from
+	 * the IRQ code simpler.
+	 */
+static DEFINE_SPINLOCK(lock);	/* GPIO registers */
+
+struct bcm2708_gpio {
+	struct list_head list;
+	void __iomem *base;
+	struct gpio_chip gc;
+	unsigned long rising;
+	unsigned long falling;
+};
+
+static int bcm2708_set_function(struct gpio_chip *gc, unsigned offset,
+				int function)
+{
+	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
+	unsigned long flags;
+	unsigned gpiodir;
+	unsigned gpio_bank = offset / 10;
+	unsigned gpio_field_offset = (offset - 10 * gpio_bank) * 3;
+
+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set_function %p (%d,%d)\n", gc, offset, function);
+	if (offset >= ARCH_NR_GPIOS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&lock, flags);
+
+	gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank));
+	gpiodir &= ~(7 << gpio_field_offset);
+	gpiodir |= function << gpio_field_offset;
+	writel(gpiodir, gpio->base + GPIOFSEL(gpio_bank));
+	spin_unlock_irqrestore(&lock, flags);
+	gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank));
+
+	return 0;
+}
+
+static int bcm2708_gpio_dir_in(struct gpio_chip *gc, unsigned offset)
+{
+	return bcm2708_set_function(gc, offset, GPIO_FSEL_INPUT);
+}
+
+static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value);
+static int bcm2708_gpio_dir_out(struct gpio_chip *gc, unsigned offset,
+				int value)
+{
+	int ret;
+	ret = bcm2708_set_function(gc, offset, GPIO_FSEL_OUTPUT);
+	if (ret >= 0)
+		bcm2708_gpio_set(gc, offset, value);
+	return ret;
+}
+
+static int bcm2708_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
+	unsigned gpio_bank = offset / 32;
+	unsigned gpio_field_offset = (offset - 32 * gpio_bank);
+	unsigned lev;
+
+	if (offset >= ARCH_NR_GPIOS)
+		return 0;
+	lev = readl(gpio->base + GPIOLEV(gpio_bank));
+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_get %p (%d)=%d\n", gc, offset, 0x1 & (lev>>gpio_field_offset));
+	return 0x1 & (lev >> gpio_field_offset);
+}
+
+static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
+	unsigned gpio_bank = offset / 32;
+	unsigned gpio_field_offset = (offset - 32 * gpio_bank);
+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set %p (%d=%d)\n", gc, offset, value);
+	if (offset >= ARCH_NR_GPIOS)
+		return;
+	if (value)
+		writel(1 << gpio_field_offset, gpio->base + GPIOSET(gpio_bank));
+	else
+		writel(1 << gpio_field_offset, gpio->base + GPIOCLR(gpio_bank));
+}
+
+/*************************************************************************************************************************
+ * bcm2708 GPIO IRQ
+ */
+
+#if BCM_GPIO_USE_IRQ
+
+#define IRQ_TO_GPIO(x)	irq_to_gpio(x)
+
+static int bcm2708_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	return gpio_to_irq(gpio);
+}
+
+static int bcm2708_gpio_irq_set_type(struct irq_data *d, unsigned type)
+{
+	unsigned irq = d->irq;
+	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
+
+	if (type & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	if (type & IRQ_TYPE_EDGE_RISING) {
+		gpio->rising |= (1 << IRQ_TO_GPIO(irq));
+	} else {
+		gpio->rising &= ~(1 << IRQ_TO_GPIO(irq));
+	}
+
+	if (type & IRQ_TYPE_EDGE_FALLING) {
+		gpio->falling |= (1 << IRQ_TO_GPIO(irq));
+	} else {
+		gpio->falling &= ~(1 << IRQ_TO_GPIO(irq));
+	}
+	return 0;
+}
+
+static void bcm2708_gpio_irq_mask(struct irq_data *d)
+{
+	unsigned irq = d->irq;
+	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
+	unsigned gn = IRQ_TO_GPIO(irq);
+	unsigned gb = gn / 32;
+	unsigned long rising = readl(gpio->base + GPIOREN(gb));
+	unsigned long falling = readl(gpio->base + GPIOFEN(gb));
+
+	writel(rising & ~(1 << gn), gpio->base + GPIOREN(gb));
+	writel(falling & ~(1 << gn), gpio->base + GPIOFEN(gb));
+}
+
+static void bcm2708_gpio_irq_unmask(struct irq_data *d)
+{
+	unsigned irq = d->irq;
+	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
+	unsigned gn = IRQ_TO_GPIO(irq);
+	unsigned gb = gn / 32;
+	unsigned long rising = readl(gpio->base + GPIOREN(gb));
+	unsigned long falling = readl(gpio->base + GPIOFEN(gb));
+
+	gn = gn % 32;
+
+	writel(1 << gn, gpio->base + GPIOEDS(gb));
+
+	if (gpio->rising & (1 << gn)) {
+		writel(rising | (1 << gn), gpio->base + GPIOREN(gb));
+	} else {
+		writel(rising & ~(1 << gn), gpio->base + GPIOREN(gb));
+	}
+
+	if (gpio->falling & (1 << gn)) {
+		writel(falling | (1 << gn), gpio->base + GPIOFEN(gb));
+	} else {
+		writel(falling & ~(1 << gn), gpio->base + GPIOFEN(gb));
+	}
+}
+
+static struct irq_chip bcm2708_irqchip = {
+	.name = "GPIO",
+	.irq_enable = bcm2708_gpio_irq_unmask,
+	.irq_disable = bcm2708_gpio_irq_mask,
+	.irq_unmask = bcm2708_gpio_irq_unmask,
+	.irq_mask = bcm2708_gpio_irq_mask,
+	.irq_set_type = bcm2708_gpio_irq_set_type,
+};
+
+static irqreturn_t bcm2708_gpio_interrupt(int irq, void *dev_id)
+{
+	unsigned long edsr;
+	unsigned bank;
+	int i;
+	unsigned gpio;
+	for (bank = 0; bank <= 1; bank++) {
+		edsr = readl(__io_address(GPIO_BASE) + GPIOEDS(bank));
+		for_each_set_bit(i, &edsr, 32) {
+			gpio = i + bank * 32;
+			generic_handle_irq(gpio_to_irq(gpio));
+		}
+		writel(0xffffffff, __io_address(GPIO_BASE) + GPIOEDS(bank));
+	}
+	return IRQ_HANDLED;
+}
+
+static struct irqaction bcm2708_gpio_irq = {
+	.name = "BCM2708 GPIO catchall handler",
+	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler = bcm2708_gpio_interrupt,
+};
+
+static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb)
+{
+	unsigned irq;
+
+	ucb->gc.to_irq = bcm2708_gpio_to_irq;
+
+	for (irq = GPIO_IRQ_START; irq < (GPIO_IRQ_START + GPIO_IRQS); irq++) {
+		irq_set_chip_data(irq, ucb);
+		irq_set_chip(irq, &bcm2708_irqchip);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+	setup_irq(IRQ_GPIO3, &bcm2708_gpio_irq);
+}
+
+#else
+
+static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb)
+{
+}
+
+#endif /* #if BCM_GPIO_USE_IRQ ***************************************************************************************************************** */
+
+static int bcm2708_gpio_probe(struct platform_device *dev)
+{
+	struct bcm2708_gpio *ucb;
+	struct resource *res;
+	int err = 0;
+
+	printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_probe %p\n", dev);
+
+	ucb = kzalloc(sizeof(*ucb), GFP_KERNEL);
+	if (NULL == ucb) {
+		printk(KERN_ERR DRIVER_NAME ": failed to allocate "
+		       "mailbox memory\n");
+		err = -ENOMEM;
+		goto err;
+	}
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+
+	platform_set_drvdata(dev, ucb);
+	ucb->base = __io_address(GPIO_BASE);
+
+	ucb->gc.label = "bcm2708_gpio";
+	ucb->gc.base = 0;
+	ucb->gc.ngpio = ARCH_NR_GPIOS;
+	ucb->gc.owner = THIS_MODULE;
+
+	ucb->gc.direction_input = bcm2708_gpio_dir_in;
+	ucb->gc.direction_output = bcm2708_gpio_dir_out;
+	ucb->gc.get = bcm2708_gpio_get;
+	ucb->gc.set = bcm2708_gpio_set;
+	ucb->gc.can_sleep = 0;
+
+	bcm2708_gpio_irq_init(ucb);
+
+	err = gpiochip_add(&ucb->gc);
+	if (err)
+		goto err;
+
+err:
+	return err;
+
+}
+
+static int bcm2708_gpio_remove(struct platform_device *dev)
+{
+	int err = 0;
+	struct bcm2708_gpio *ucb = platform_get_drvdata(dev);
+
+	printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_remove %p\n", dev);
+
+	err = gpiochip_remove(&ucb->gc);
+
+	platform_set_drvdata(dev, NULL);
+	kfree(ucb);
+
+	return err;
+}
+
+static struct platform_driver bcm2708_gpio_driver = {
+	.probe = bcm2708_gpio_probe,
+	.remove = bcm2708_gpio_remove,
+	.driver = {
+		   .name = "bcm2708_gpio"},
+};
+
+static int __init bcm2708_gpio_init(void)
+{
+	return platform_driver_register(&bcm2708_gpio_driver);
+}
+
+static void __exit bcm2708_gpio_exit(void)
+{
+	platform_driver_unregister(&bcm2708_gpio_driver);
+}
+
+module_init(bcm2708_gpio_init);
+module_exit(bcm2708_gpio_exit);
+
+MODULE_DESCRIPTION("Broadcom BCM2708 GPIO driver");
+MODULE_LICENSE("GPL");

arch/arm/mach-bcm2708/clock.c

@@ -0,0 +1,61 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/clock.c
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return -EIO;
+}
+EXPORT_SYMBOL(clk_set_rate);

arch/arm/mach-bcm2708/clock.h

@@ -0,0 +1,24 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/clock.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+struct module;
+
+struct clk {
+	unsigned long		rate;
+};

arch/arm/mach-bcm2708/dma.c

@@ -0,0 +1,397 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/dma.c
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/scatterlist.h>
+
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+/*****************************************************************************\
+ *									     *
+ * Configuration							     *
+ *									     *
+\*****************************************************************************/
+
+#define CACHE_LINE_MASK 31
+#define DRIVER_NAME BCM_DMAMAN_DRIVER_NAME
+#define DEFAULT_DMACHAN_BITMAP 0x10  /* channel 4 only */
+
+/* valid only for channels 0 - 14, 15 has its own base address */
+#define BCM2708_DMA_CHAN(n)	((n)<<8) /* base address */
+#define BCM2708_DMA_CHANIO(dma_base, n) \
+   ((void __iomem *)((char *)(dma_base)+BCM2708_DMA_CHAN(n)))
+
+
+/*****************************************************************************\
+ *									     *
+ * DMA Auxilliary Functions						     *
+ *									     *
+\*****************************************************************************/
+
+/* A DMA buffer on an arbitrary boundary may separate a cache line into a
+   section inside the DMA buffer and another section outside it.
+   Even if we flush DMA buffers from the cache there is always the chance that
+   during a DMA someone will access the part of a cache line that is outside
+   the DMA buffer - which will then bring in unwelcome data.
+   Without being able to dictate our own buffer pools we must insist that
+   DMA buffers consist of a whole number of cache lines.
+*/
+
+extern int
+bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len)
+{
+	int i;
+
+	for (i = 0; i < sg_len; i++) {
+		if (sg_ptr[i].offset & CACHE_LINE_MASK ||
+		    sg_ptr[i].length & CACHE_LINE_MASK)
+			return 0;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(bcm_sg_suitable_for_dma);
+
+extern void
+bcm_dma_start(void __iomem *dma_chan_base, dma_addr_t control_block)
+{
+	dsb();	/* ARM data synchronization (push) operation */
+
+	writel(control_block,	     dma_chan_base + BCM2708_DMA_ADDR);
+	writel(BCM2708_DMA_ACTIVE,   dma_chan_base + BCM2708_DMA_CS);
+}
+
+extern void bcm_dma_wait_idle(void __iomem *dma_chan_base)
+{
+  dsb();
+
+  /* ugly busy wait only option for now */
+  while (readl(dma_chan_base + BCM2708_DMA_CS) & BCM2708_DMA_ACTIVE);
+}
+
+EXPORT_SYMBOL_GPL(bcm_dma_start);
+
+/* Complete an ongoing DMA (assuming its results are to be ignored)
+   Does nothing if there is no DMA in progress.
+   This routine waits for the current AXI transfer to complete before
+   terminating the current DMA.	 If the current transfer is hung on a DREQ used
+   by an uncooperative peripheral the AXI transfer may never complete.	In this
+   case the routine times out and return a non-zero error code.
+   Use of this routine doesn't guarantee that the ongoing or aborted DMA
+   does not produce an interrupt.
+*/
+extern int
+bcm_dma_abort(void __iomem *dma_chan_base)
+{
+	unsigned long int cs;
+	int rc = 0;
+
+	cs = readl(dma_chan_base + BCM2708_DMA_CS);
+
+	if (BCM2708_DMA_ACTIVE & cs) {
+		long int timeout = 10000;
+
+		/* write 0 to the active bit - pause the DMA */
+		writel(0, dma_chan_base + BCM2708_DMA_CS);
+
+		/* wait for any current AXI transfer to complete */
+		while (0 != (cs & BCM2708_DMA_ISPAUSED) && --timeout >= 0)
+			cs = readl(dma_chan_base + BCM2708_DMA_CS);
+
+		if (0 != (cs & BCM2708_DMA_ISPAUSED)) {
+			/* we'll un-pause when we set of our next DMA */
+			rc = -ETIMEDOUT;
+
+		} else if (BCM2708_DMA_ACTIVE & cs) {
+			/* terminate the control block chain */
+			writel(0, dma_chan_base + BCM2708_DMA_NEXTCB);
+
+			/* abort the whole DMA */
+			writel(BCM2708_DMA_ABORT | BCM2708_DMA_ACTIVE,
+			       dma_chan_base + BCM2708_DMA_CS);
+		}
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_dma_abort);
+
+
+/***************************************************************************** \
+ *									     *
+ * DMA Manager Device Methods						     *
+ *									     *
+\*****************************************************************************/
+
+struct vc_dmaman {
+	void __iomem *dma_base;
+	u32 chan_available; /* bitmap of available channels */
+	u32 has_feature[BCM_DMA_FEATURE_COUNT]; /* bitmap of feature presence */
+};
+
+static void vc_dmaman_init(struct vc_dmaman *dmaman, void __iomem *dma_base,
+			   u32 chans_available)
+{
+	dmaman->dma_base = dma_base;
+	dmaman->chan_available = chans_available;
+	dmaman->has_feature[BCM_DMA_FEATURE_FAST_ORD] = 0x0c;  /* chans 2 & 3 */
+}
+
+static int vc_dmaman_chan_alloc(struct vc_dmaman *dmaman,
+				unsigned preferred_feature_set)
+{
+	u32 chans;
+	int feature;
+
+	chans = dmaman->chan_available;
+	for (feature = 0; feature < BCM_DMA_FEATURE_COUNT; feature++)
+		/* select the subset of available channels with the desired
+		   feature so long as some of the candidate channels have that
+		   feature */
+		if ((preferred_feature_set & (1 << feature)) &&
+		    (chans & dmaman->has_feature[feature]))
+			chans &= dmaman->has_feature[feature];
+
+	if (chans) {
+		int chan = 0;
+		/* return the ordinal of the first channel in the bitmap */
+		while (chans != 0 && (chans & 1) == 0) {
+			chans >>= 1;
+			chan++;
+		}
+		/* claim the channel */
+		dmaman->chan_available &= ~(1 << chan);
+		return chan;
+	} else
+		return -ENOMEM;
+}
+
+static int vc_dmaman_chan_free(struct vc_dmaman *dmaman, int chan)
+{
+	if (chan < 0)
+		return -EINVAL;
+	else if ((1 << chan) & dmaman->chan_available)
+		return -EIDRM;
+	else {
+		dmaman->chan_available |= (1 << chan);
+		return 0;
+	}
+}
+
+/*****************************************************************************\
+ *									     *
+ * DMA IRQs								     *
+ *									     *
+\*****************************************************************************/
+
+static unsigned char bcm_dma_irqs[] = {
+	IRQ_DMA0,
+	IRQ_DMA1,
+	IRQ_DMA2,
+	IRQ_DMA3,
+	IRQ_DMA4,
+	IRQ_DMA5,
+	IRQ_DMA6,
+	IRQ_DMA7,
+	IRQ_DMA8,
+	IRQ_DMA9,
+	IRQ_DMA10,
+	IRQ_DMA11,
+	IRQ_DMA12
+};
+
+
+/***************************************************************************** \
+ *									     *
+ * DMA Manager Monitor							     *
+ *									     *
+\*****************************************************************************/
+
+static struct device *dmaman_dev;	/* we assume there's only one! */
+
+extern int bcm_dma_chan_alloc(unsigned preferred_feature_set,
+			      void __iomem **out_dma_base, int *out_dma_irq)
+{
+	if (!dmaman_dev)
+		return -ENODEV;
+	else {
+		struct vc_dmaman *dmaman  = dev_get_drvdata(dmaman_dev);
+		int rc;
+
+		device_lock(dmaman_dev);
+		rc = vc_dmaman_chan_alloc(dmaman, preferred_feature_set);
+		if (rc >= 0) {
+			*out_dma_base = BCM2708_DMA_CHANIO(dmaman->dma_base,
+							   rc);
+			*out_dma_irq = bcm_dma_irqs[rc];
+		}
+		device_unlock(dmaman_dev);
+
+		return rc;
+	}
+}
+EXPORT_SYMBOL_GPL(bcm_dma_chan_alloc);
+
+extern int bcm_dma_chan_free(int channel)
+{
+	if (dmaman_dev) {
+		struct vc_dmaman *dmaman = dev_get_drvdata(dmaman_dev);
+		int rc;
+
+		device_lock(dmaman_dev);
+		rc = vc_dmaman_chan_free(dmaman, channel);
+		device_unlock(dmaman_dev);
+
+		return rc;
+	} else
+		return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(bcm_dma_chan_free);
+
+static int dev_dmaman_register(const char *dev_name, struct device *dev)
+{
+	int rc = dmaman_dev ? -EINVAL : 0;
+	dmaman_dev = dev;
+	return rc;
+}
+
+static void dev_dmaman_deregister(const char *dev_name, struct device *dev)
+{
+	dmaman_dev = NULL;
+}
+
+/*****************************************************************************\
+ *									     *
+ * DMA Device								     *
+ *									     *
+\*****************************************************************************/
+
+static int dmachans = -1; /* module parameter */
+
+static int bcm_dmaman_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct vc_dmaman *dmaman;
+	struct resource *dma_res = NULL;
+	void __iomem *dma_base = NULL;
+	int have_dma_region = 0;
+
+	dmaman = kzalloc(sizeof(*dmaman), GFP_KERNEL);
+	if (NULL == dmaman) {
+		printk(KERN_ERR DRIVER_NAME ": failed to allocate "
+		       "DMA management memory\n");
+		ret = -ENOMEM;
+	} else {
+
+		dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (dma_res == NULL) {
+			printk(KERN_ERR DRIVER_NAME ": failed to obtain memory "
+			       "resource\n");
+			ret = -ENODEV;
+		} else if (!request_mem_region(dma_res->start,
+					       resource_size(dma_res),
+					       DRIVER_NAME)) {
+			dev_err(&pdev->dev, "cannot obtain DMA region\n");
+			ret = -EBUSY;
+		} else {
+			have_dma_region = 1;
+			dma_base = ioremap(dma_res->start,
+					   resource_size(dma_res));
+			if (!dma_base) {
+				dev_err(&pdev->dev, "cannot map DMA region\n");
+				ret = -ENOMEM;
+			} else {
+				/* use module parameter if one was provided */
+				if (dmachans > 0)
+					vc_dmaman_init(dmaman, dma_base,
+						       dmachans);
+				else
+					vc_dmaman_init(dmaman, dma_base,
+						       DEFAULT_DMACHAN_BITMAP);
+
+				platform_set_drvdata(pdev, dmaman);
+				dev_dmaman_register(DRIVER_NAME, &pdev->dev);
+
+				printk(KERN_INFO DRIVER_NAME ": DMA manager "
+				       "at %p\n", dma_base);
+			}
+		}
+	}
+	if (ret != 0) {
+		if (dma_base)
+			iounmap(dma_base);
+		if (dma_res && have_dma_region)
+			release_mem_region(dma_res->start,
+					   resource_size(dma_res));
+		if (dmaman)
+			kfree(dmaman);
+	}
+	return ret;
+}
+
+static int bcm_dmaman_remove(struct platform_device *pdev)
+{
+	struct vc_dmaman *dmaman = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	dev_dmaman_deregister(DRIVER_NAME, &pdev->dev);
+	kfree(dmaman);
+
+	return 0;
+}
+
+static struct platform_driver bcm_dmaman_driver = {
+	.probe = bcm_dmaman_probe,
+	.remove = bcm_dmaman_remove,
+
+	.driver = {
+		   .name = DRIVER_NAME,
+		   .owner = THIS_MODULE,
+		   },
+};
+
+/*****************************************************************************\
+ *									     *
+ * Driver init/exit							     *
+ *									     *
+\*****************************************************************************/
+
+static int __init bcm_dmaman_drv_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&bcm_dmaman_driver);
+	if (ret != 0) {
+		printk(KERN_ERR DRIVER_NAME ": failed to register "
+		       "on platform\n");
+	}
+
+	return ret;
+}
+
+static void __exit bcm_dmaman_drv_exit(void)
+{
+	platform_driver_unregister(&bcm_dmaman_driver);
+}
+
+module_init(bcm_dmaman_drv_init);
+module_exit(bcm_dmaman_drv_exit);
+
+module_param(dmachans, int, 0644);
+
+MODULE_AUTHOR("Gray Girling <grayg@broadcom.com>");
+MODULE_DESCRIPTION("DMA channel manager driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM_DESC(dmachans, "Bitmap of DMA channels available to the ARM");

arch/arm/mach-bcm2708/include/mach/arm_control.h

@@ -0,0 +1,419 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/arm_control.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __BCM2708_ARM_CONTROL_H
+#define __BCM2708_ARM_CONTROL_H
+
+/*
+ * Definitions and addresses for the ARM CONTROL logic
+ * This file is manually generated.
+ */
+
+#define ARM_BASE  0x7E00B000
+
+/* Basic configuration */
+#define ARM_CONTROL0  HW_REGISTER_RW(ARM_BASE+0x000)
+#define ARM_C0_SIZ128M   0x00000000
+#define ARM_C0_SIZ256M   0x00000001
+#define ARM_C0_SIZ512M   0x00000002
+#define ARM_C0_SIZ1G     0x00000003
+#define ARM_C0_BRESP0    0x00000000
+#define ARM_C0_BRESP1    0x00000004
+#define ARM_C0_BRESP2    0x00000008
+#define ARM_C0_BOOTHI    0x00000010
+#define ARM_C0_UNUSED05  0x00000020 /* free */
+#define ARM_C0_FULLPERI  0x00000040
+#define ARM_C0_UNUSED78  0x00000180 /* free */
+#define ARM_C0_JTAGMASK  0x00000E00
+#define ARM_C0_JTAGOFF   0x00000000
+#define ARM_C0_JTAGBASH  0x00000800 /* Debug on GPIO off */
+#define ARM_C0_JTAGGPIO  0x00000C00 /* Debug on GPIO on */
+#define ARM_C0_APROTMSK  0x0000F000
+#define ARM_C0_DBG0SYNC  0x00010000 /* VPU0 halt sync */
+#define ARM_C0_DBG1SYNC  0x00020000 /* VPU1 halt sync */
+#define ARM_C0_SWDBGREQ  0x00040000 /* HW debug request */
+#define ARM_C0_PASSHALT  0x00080000 /* ARM halt passed to debugger */
+#define ARM_C0_PRIO_PER  0x00F00000 /* per priority mask */
+#define ARM_C0_PRIO_L2   0x0F000000
+#define ARM_C0_PRIO_UC   0xF0000000
+
+#define ARM_C0_APROTPASS  0x0000A000 /* Translate 1:1 */
+#define ARM_C0_APROTUSER  0x00000000 /* Only user mode */
+#define ARM_C0_APROTSYST  0x0000F000 /* Only system mode */
+
+
+#define ARM_CONTROL1  HW_REGISTER_RW(ARM_BASE+0x440)
+#define ARM_C1_TIMER     0x00000001 /* re-route timer IRQ  to VC */
+#define ARM_C1_MAIL      0x00000002 /* re-route Mail IRQ   to VC */
+#define ARM_C1_BELL0     0x00000004 /* re-route Doorbell 0 to VC */
+#define ARM_C1_BELL1     0x00000008 /* re-route Doorbell 1 to VC */
+#define ARM_C1_PERSON    0x00000100 /* peripherals on */
+#define ARM_C1_REQSTOP   0x00000200 /* ASYNC bridge request stop */
+
+#define ARM_STATUS    HW_REGISTER_RW(ARM_BASE+0x444)
+#define ARM_S_ACKSTOP    0x80000000 /* Bridge stopped */
+#define ARM_S_READPEND   0x000003FF /* pending reads counter */
+#define ARM_S_WRITPEND   0x000FFC00 /* pending writes counter */
+
+#define ARM_ERRHALT   HW_REGISTER_RW(ARM_BASE+0x448)
+#define ARM_EH_PERIBURST  0x00000001 /* Burst write seen on peri bus */
+#define ARM_EH_ILLADDRS1  0x00000002 /* Address bits 25-27 error */
+#define ARM_EH_ILLADDRS2  0x00000004 /* Address bits 31-28 error */
+#define ARM_EH_VPU0HALT   0x00000008 /* VPU0 halted & in debug mode */
+#define ARM_EH_VPU1HALT   0x00000010 /* VPU1 halted & in debug mode */
+#define ARM_EH_ARMHALT    0x00000020 /* ARM in halted debug mode */
+
+#define ARM_ID_SECURE HW_REGISTER_RW(ARM_BASE+0x00C)
+#define ARM_ID        HW_REGISTER_RW(ARM_BASE+0x44C)
+#define ARM_IDVAL        0x364D5241
+
+/* Translation memory */
+#define ARM_TRANSLATE HW_REGISTER_RW(ARM_BASE+0x100)
+/* 32 locations: 0x100.. 0x17F */
+/* 32 spare means we CAN go to 64 pages.... */
+
+
+/* Interrupts */
+#define ARM_IRQ_PEND0 HW_REGISTER_RW(ARM_BASE+0x200)        /* Top IRQ bits */
+#define ARM_I0_TIMER    0x00000001 /* timer IRQ */
+#define ARM_I0_MAIL     0x00000002 /* Mail IRQ */
+#define ARM_I0_BELL0    0x00000004 /* Doorbell 0 */
+#define ARM_I0_BELL1    0x00000008 /* Doorbell 1 */
+#define ARM_I0_BANK1    0x00000100 /* Bank1 IRQ */
+#define ARM_I0_BANK2    0x00000200 /* Bank2 IRQ */
+
+#define ARM_IRQ_PEND1 HW_REGISTER_RW(ARM_BASE+0x204) /* All bank1 IRQ bits */
+/* todo: all I1_interrupt sources */
+#define ARM_IRQ_PEND2 HW_REGISTER_RW(ARM_BASE+0x208) /* All bank2 IRQ bits */
+/* todo: all I2_interrupt sources */
+
+#define ARM_IRQ_FAST  HW_REGISTER_RW(ARM_BASE+0x20C) /* FIQ control */
+#define ARM_IF_INDEX    0x0000007F     /* FIQ select */
+#define ARM_IF_ENABLE   0x00000080     /* FIQ enable */
+#define ARM_IF_VCMASK   0x0000003F     /* FIQ = (index from VC source) */
+#define ARM_IF_TIMER    0x00000040     /* FIQ = ARM timer */
+#define ARM_IF_MAIL     0x00000041     /* FIQ = ARM Mail */
+#define ARM_IF_BELL0    0x00000042     /* FIQ = ARM Doorbell 0 */
+#define ARM_IF_BELL1    0x00000043     /* FIQ = ARM Doorbell 1 */
+#define ARM_IF_VP0HALT  0x00000044     /* FIQ = VPU0 Halt seen */
+#define ARM_IF_VP1HALT  0x00000045     /* FIQ = VPU1 Halt seen */
+#define ARM_IF_ILLEGAL  0x00000046     /* FIQ = Illegal access seen */
+
+#define ARM_IRQ_ENBL1 HW_REGISTER_RW(ARM_BASE+0x210) /* Bank1 enable bits */
+#define ARM_IRQ_ENBL2 HW_REGISTER_RW(ARM_BASE+0x214) /* Bank2 enable bits */
+#define ARM_IRQ_ENBL3 HW_REGISTER_RW(ARM_BASE+0x218) /* ARM irqs enable bits */
+#define ARM_IRQ_DIBL1 HW_REGISTER_RW(ARM_BASE+0x21C) /* Bank1 disable bits */
+#define ARM_IRQ_DIBL2 HW_REGISTER_RW(ARM_BASE+0x220) /* Bank2 disable bits */
+#define ARM_IRQ_DIBL3 HW_REGISTER_RW(ARM_BASE+0x224) /* ARM irqs disable bits */
+#define ARM_IE_TIMER    0x00000001     /* Timer IRQ */
+#define ARM_IE_MAIL     0x00000002     /* Mail IRQ */
+#define ARM_IE_BELL0    0x00000004     /* Doorbell 0 */
+#define ARM_IE_BELL1    0x00000008     /* Doorbell 1 */
+#define ARM_IE_VP0HALT  0x00000010     /* VPU0 Halt */
+#define ARM_IE_VP1HALT  0x00000020     /* VPU1 Halt */
+#define ARM_IE_ILLEGAL  0x00000040     /* Illegal access seen */
+
+/* Timer */
+/* For reg. fields see sp804 spec. */
+#define ARM_T_LOAD    HW_REGISTER_RW(ARM_BASE+0x400)
+#define ARM_T_VALUE   HW_REGISTER_RW(ARM_BASE+0x404)
+#define ARM_T_CONTROL HW_REGISTER_RW(ARM_BASE+0x408)
+#define ARM_T_IRQCNTL HW_REGISTER_RW(ARM_BASE+0x40C)
+#define ARM_T_RAWIRQ  HW_REGISTER_RW(ARM_BASE+0x410)
+#define ARM_T_MSKIRQ  HW_REGISTER_RW(ARM_BASE+0x414)
+#define ARM_T_RELOAD  HW_REGISTER_RW(ARM_BASE+0x418)
+#define ARM_T_PREDIV  HW_REGISTER_RW(ARM_BASE+0x41c)
+#define ARM_T_FREECNT HW_REGISTER_RW(ARM_BASE+0x420)
+
+#define TIMER_CTRL_ONESHOT  (1 << 0)
+#define TIMER_CTRL_32BIT    (1 << 1)
+#define TIMER_CTRL_DIV1     (0 << 2)
+#define TIMER_CTRL_DIV16    (1 << 2)
+#define TIMER_CTRL_DIV256   (2 << 2)
+#define TIMER_CTRL_IE       (1 << 5)
+#define TIMER_CTRL_PERIODIC (1 << 6)
+#define TIMER_CTRL_ENABLE   (1 << 7)
+#define TIMER_CTRL_DBGHALT  (1 << 8)
+#define TIMER_CTRL_ENAFREE  (1 << 9)
+#define TIMER_CTRL_FREEDIV_SHIFT 16)
+#define TIMER_CTRL_FREEDIV_MASK  0xff
+
+/* Semaphores, Doorbells, Mailboxes */
+#define ARM_SBM_OWN0  (ARM_BASE+0x800)
+#define ARM_SBM_OWN1  (ARM_BASE+0x900)
+#define ARM_SBM_OWN2  (ARM_BASE+0xA00)
+#define ARM_SBM_OWN3  (ARM_BASE+0xB00)
+
+/* MAILBOXES
+ * Register flags are common across all
+ * owner registers. See end of this section
+ *
+ * Semaphores, Doorbells, Mailboxes Owner 0
+ *
+ */
+
+#define ARM_0_SEMS       HW_REGISTER_RW(ARM_SBM_OWN0+0x00)
+#define ARM_0_SEM0       HW_REGISTER_RW(ARM_SBM_OWN0+0x00)
+#define ARM_0_SEM1       HW_REGISTER_RW(ARM_SBM_OWN0+0x04)
+#define ARM_0_SEM2       HW_REGISTER_RW(ARM_SBM_OWN0+0x08)
+#define ARM_0_SEM3       HW_REGISTER_RW(ARM_SBM_OWN0+0x0C)
+#define ARM_0_SEM4       HW_REGISTER_RW(ARM_SBM_OWN0+0x10)
+#define ARM_0_SEM5       HW_REGISTER_RW(ARM_SBM_OWN0+0x14)
+#define ARM_0_SEM6       HW_REGISTER_RW(ARM_SBM_OWN0+0x18)
+#define ARM_0_SEM7       HW_REGISTER_RW(ARM_SBM_OWN0+0x1C)
+#define ARM_0_BELL0      HW_REGISTER_RW(ARM_SBM_OWN0+0x40)
+#define ARM_0_BELL1      HW_REGISTER_RW(ARM_SBM_OWN0+0x44)
+#define ARM_0_BELL2      HW_REGISTER_RW(ARM_SBM_OWN0+0x48)
+#define ARM_0_BELL3      HW_REGISTER_RW(ARM_SBM_OWN0+0x4C)
+/* MAILBOX 0 access in Owner 0 area */
+/* Some addresses should ONLY be used by owner 0 */
+#define ARM_0_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN0+0x80)  /* .. 0x8C (4 locations) */
+#define ARM_0_MAIL0_RD   HW_REGISTER_RW(ARM_SBM_OWN0+0x80)  /* .. 0x8C (4 locations) Normal read */
+#define ARM_0_MAIL0_POL  HW_REGISTER_RW(ARM_SBM_OWN0+0x90)  /* none-pop read */
+#define ARM_0_MAIL0_SND  HW_REGISTER_RW(ARM_SBM_OWN0+0x94)  /* Sender read (only LS 2 bits) */
+#define ARM_0_MAIL0_STA  HW_REGISTER_RW(ARM_SBM_OWN0+0x98)  /* Status read */
+#define ARM_0_MAIL0_CNF  HW_REGISTER_RW(ARM_SBM_OWN0+0x9C)  /* Config read/write */
+/* MAILBOX 1 access in Owner 0 area */
+/* Owner 0 should only WRITE to this mailbox */
+#define ARM_0_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN0+0xA0)   /* .. 0xAC (4 locations) */
+/*#define ARM_0_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_0_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN0+0xB0) */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_0_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN0+0xB4) */ /* DO NOT USE THIS !!!!! */
+#define ARM_0_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN0+0xB8)   /* Status read */
+/*#define ARM_0_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN0+0xBC) */ /* DO NOT USE THIS !!!!! */
+/* General SEM, BELL, MAIL config/status */
+#define ARM_0_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN0+0xE0)  /* semaphore clear/debug register */
+#define ARM_0_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN0+0xE4)  /* Doorbells clear/debug register */
+#define ARM_0_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN0+0xF8)  /* ALL interrupts */
+#define ARM_0_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN0+0xFC)  /* IRQS pending for owner 0 */
+
+/* Semaphores, Doorbells, Mailboxes Owner 1 */
+#define ARM_1_SEMS       HW_REGISTER_RW(ARM_SBM_OWN1+0x00)
+#define ARM_1_SEM0       HW_REGISTER_RW(ARM_SBM_OWN1+0x00)
+#define ARM_1_SEM1       HW_REGISTER_RW(ARM_SBM_OWN1+0x04)
+#define ARM_1_SEM2       HW_REGISTER_RW(ARM_SBM_OWN1+0x08)
+#define ARM_1_SEM3       HW_REGISTER_RW(ARM_SBM_OWN1+0x0C)
+#define ARM_1_SEM4       HW_REGISTER_RW(ARM_SBM_OWN1+0x10)
+#define ARM_1_SEM5       HW_REGISTER_RW(ARM_SBM_OWN1+0x14)
+#define ARM_1_SEM6       HW_REGISTER_RW(ARM_SBM_OWN1+0x18)
+#define ARM_1_SEM7       HW_REGISTER_RW(ARM_SBM_OWN1+0x1C)
+#define ARM_1_BELL0      HW_REGISTER_RW(ARM_SBM_OWN1+0x40)
+#define ARM_1_BELL1      HW_REGISTER_RW(ARM_SBM_OWN1+0x44)
+#define ARM_1_BELL2      HW_REGISTER_RW(ARM_SBM_OWN1+0x48)
+#define ARM_1_BELL3      HW_REGISTER_RW(ARM_SBM_OWN1+0x4C)
+/* MAILBOX 0 access in Owner 0 area */
+/* Owner 1 should only WRITE to this mailbox */
+#define ARM_1_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN1+0x80)  /* .. 0x8C (4 locations) */
+/*#define ARM_1_MAIL0_RD  HW_REGISTER_RW(ARM_SBM_OWN1+0x80) */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_1_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN1+0x90) */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_1_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN1+0x94) */ /* DO NOT USE THIS !!!!! */
+#define ARM_1_MAIL0_STA  HW_REGISTER_RW(ARM_SBM_OWN1+0x98)  /* Status read */
+/*#define ARM_1_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0x9C) */ /* DO NOT USE THIS !!!!! */
+/* MAILBOX 1 access in Owner 0 area */
+#define ARM_1_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN1+0xA0)  /* .. 0xAC (4 locations) */
+#define ARM_1_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN1+0xA0)  /* .. 0xAC (4 locations) Normal read */
+#define ARM_1_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN1+0xB0)  /* none-pop read */
+#define ARM_1_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN1+0xB4)  /* Sender read (only LS 2 bits) */
+#define ARM_1_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN1+0xB8)  /* Status read */
+#define ARM_1_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN1+0xBC)
+/* General SEM, BELL, MAIL config/status */
+#define ARM_1_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN1+0xE0)  /* semaphore clear/debug register */
+#define ARM_1_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN1+0xE4)  /* Doorbells clear/debug register */
+#define ARM_1_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN1+0xFC)  /* IRQS pending for owner 1 */
+#define ARM_1_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN1+0xF8)  /* ALL interrupts */
+
+/* Semaphores, Doorbells, Mailboxes Owner 2 */
+#define ARM_2_SEMS       HW_REGISTER_RW(ARM_SBM_OWN2+0x00)
+#define ARM_2_SEM0       HW_REGISTER_RW(ARM_SBM_OWN2+0x00)
+#define ARM_2_SEM1       HW_REGISTER_RW(ARM_SBM_OWN2+0x04)
+#define ARM_2_SEM2       HW_REGISTER_RW(ARM_SBM_OWN2+0x08)
+#define ARM_2_SEM3       HW_REGISTER_RW(ARM_SBM_OWN2+0x0C)
+#define ARM_2_SEM4       HW_REGISTER_RW(ARM_SBM_OWN2+0x10)
+#define ARM_2_SEM5       HW_REGISTER_RW(ARM_SBM_OWN2+0x14)
+#define ARM_2_SEM6       HW_REGISTER_RW(ARM_SBM_OWN2+0x18)
+#define ARM_2_SEM7       HW_REGISTER_RW(ARM_SBM_OWN2+0x1C)
+#define ARM_2_BELL0      HW_REGISTER_RW(ARM_SBM_OWN2+0x40)
+#define ARM_2_BELL1      HW_REGISTER_RW(ARM_SBM_OWN2+0x44)
+#define ARM_2_BELL2      HW_REGISTER_RW(ARM_SBM_OWN2+0x48)
+#define ARM_2_BELL3      HW_REGISTER_RW(ARM_SBM_OWN2+0x4C)
+/* MAILBOX 0 access in Owner 2 area */
+/* Owner 2 should only WRITE to this mailbox */
+#define ARM_2_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN2+0x80)   /* .. 0x8C (4 locations) */
+/*#define ARM_2_MAIL0_RD  HW_REGISTER_RW(ARM_SBM_OWN2+0x80)  */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_2_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN2+0x90)  */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_2_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN2+0x94)  */ /* DO NOT USE THIS !!!!! */
+#define ARM_2_MAIL0_STA  HW_REGISTER_RW(ARM_SBM_OWN2+0x98)   /* Status read */
+/*#define ARM_2_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0x9C)  */ /* DO NOT USE THIS !!!!! */
+/* MAILBOX 1 access in Owner 2 area */
+/* Owner 2 should only WRITE to this mailbox */
+#define ARM_2_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN2+0xA0)   /* .. 0xAC (4 locations) */
+/*#define ARM_2_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_2_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN2+0xB0) */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_2_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN2+0xB4) */ /* DO NOT USE THIS !!!!! */
+#define ARM_2_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN2+0xB8)   /* Status read */
+/*#define ARM_2_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN2+0xBC) */ /* DO NOT USE THIS !!!!! */
+/* General SEM, BELL, MAIL config/status */
+#define ARM_2_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN2+0xE0)  /* semaphore clear/debug register */
+#define ARM_2_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN2+0xE4)  /* Doorbells clear/debug register */
+#define ARM_2_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN2+0xFC)  /* IRQS pending for owner 2 */
+#define ARM_2_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN2+0xF8)  /* ALL interrupts */
+
+/* Semaphores, Doorbells, Mailboxes Owner 3 */
+#define ARM_3_SEMS       HW_REGISTER_RW(ARM_SBM_OWN3+0x00)
+#define ARM_3_SEM0       HW_REGISTER_RW(ARM_SBM_OWN3+0x00)
+#define ARM_3_SEM1       HW_REGISTER_RW(ARM_SBM_OWN3+0x04)
+#define ARM_3_SEM2       HW_REGISTER_RW(ARM_SBM_OWN3+0x08)
+#define ARM_3_SEM3       HW_REGISTER_RW(ARM_SBM_OWN3+0x0C)
+#define ARM_3_SEM4       HW_REGISTER_RW(ARM_SBM_OWN3+0x10)
+#define ARM_3_SEM5       HW_REGISTER_RW(ARM_SBM_OWN3+0x14)
+#define ARM_3_SEM6       HW_REGISTER_RW(ARM_SBM_OWN3+0x18)
+#define ARM_3_SEM7       HW_REGISTER_RW(ARM_SBM_OWN3+0x1C)
+#define ARM_3_BELL0      HW_REGISTER_RW(ARM_SBM_OWN3+0x40)
+#define ARM_3_BELL1      HW_REGISTER_RW(ARM_SBM_OWN3+0x44)
+#define ARM_3_BELL2      HW_REGISTER_RW(ARM_SBM_OWN3+0x48)
+#define ARM_3_BELL3      HW_REGISTER_RW(ARM_SBM_OWN3+0x4C)
+/* MAILBOX 0 access in Owner 3 area */
+/* Owner 3 should only WRITE to this mailbox */
+#define ARM_3_MAIL0_WRT  HW_REGISTER_RW(ARM_SBM_OWN3+0x80)   /* .. 0x8C (4 locations) */
+/*#define ARM_3_MAIL0_RD  HW_REGISTER_RW(ARM_SBM_OWN3+0x80)  */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_3_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN3+0x90)  */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_3_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN3+0x94)  */ /* DO NOT USE THIS !!!!! */
+#define ARM_3_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN3+0x98)    /* Status read */
+/*#define ARM_3_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0x9C)  */ /* DO NOT USE THIS !!!!! */
+/* MAILBOX 1 access in Owner 3 area */
+/* Owner 3 should only WRITE to this mailbox */
+#define ARM_3_MAIL1_WRT  HW_REGISTER_RW(ARM_SBM_OWN3+0xA0)   /* .. 0xAC (4 locations) */
+/*#define ARM_3_MAIL1_RD   HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_3_MAIL1_POL  HW_REGISTER_RW(ARM_SBM_OWN3+0xB0) */ /* DO NOT USE THIS !!!!! */
+/*#define ARM_3_MAIL1_SND  HW_REGISTER_RW(ARM_SBM_OWN3+0xB4) */ /* DO NOT USE THIS !!!!! */
+#define ARM_3_MAIL1_STA  HW_REGISTER_RW(ARM_SBM_OWN3+0xB8)   /* Status read */
+/*#define ARM_3_MAIL1_CNF  HW_REGISTER_RW(ARM_SBM_OWN3+0xBC) */ /* DO NOT USE THIS !!!!! */
+/* General SEM, BELL, MAIL config/status */
+#define ARM_3_SEMCLRDBG   HW_REGISTER_RW(ARM_SBM_OWN3+0xE0)  /* semaphore clear/debug register */
+#define ARM_3_BELLCLRDBG  HW_REGISTER_RW(ARM_SBM_OWN3+0xE4)  /* Doorbells clear/debug register */
+#define ARM_3_MY_IRQS     HW_REGISTER_RW(ARM_SBM_OWN3+0xFC)  /* IRQS pending for owner 3 */
+#define ARM_3_ALL_IRQS    HW_REGISTER_RW(ARM_SBM_OWN3+0xF8)  /* ALL interrupts */
+
+
+
+/*  Mailbox flags. Valid for all owners */
+
+/* Mailbox status register (...0x98) */
+#define ARM_MS_FULL       0x80000000
+#define ARM_MS_EMPTY      0x40000000
+#define ARM_MS_LEVEL      0x400000FF /* Max. value depdnds on mailbox depth parameter */
+
+/* MAILBOX config/status register (...0x9C) */
+/* ANY write to this register clears the error bits! */
+#define ARM_MC_IHAVEDATAIRQEN    0x00000001 /* mailbox irq enable:  has data */
+#define ARM_MC_IHAVESPACEIRQEN   0x00000002 /* mailbox irq enable:  has space */
+#define ARM_MC_OPPISEMPTYIRQEN   0x00000004 /* mailbox irq enable: Opp. is empty */
+#define ARM_MC_MAIL_CLEAR        0x00000008 /* mailbox clear write 1, then  0 */
+#define ARM_MC_IHAVEDATAIRQPEND  0x00000010 /* mailbox irq pending:  has space */
+#define ARM_MC_IHAVESPACEIRQPEND 0x00000020 /* mailbox irq pending: Opp. is empty */
+#define ARM_MC_OPPISEMPTYIRQPEND 0x00000040 /* mailbox irq pending */
+/* Bit 7 is unused */
+#define ARM_MC_ERRNOOWN   0x00000100 /* error : none owner read from mailbox */
+#define ARM_MC_ERROVERFLW 0x00000200 /* error : write to fill mailbox */
+#define ARM_MC_ERRUNDRFLW 0x00000400 /* error : read from empty mailbox */
+
+/* Semaphore clear/debug register (...0xE0) */
+#define ARM_SD_OWN0      0x00000003  /* Owner of sem 0 */
+#define ARM_SD_OWN1      0x0000000C  /* Owner of sem 1 */
+#define ARM_SD_OWN2      0x00000030  /* Owner of sem 2 */
+#define ARM_SD_OWN3      0x000000C0  /* Owner of sem 3 */
+#define ARM_SD_OWN4      0x00000300  /* Owner of sem 4 */
+#define ARM_SD_OWN5      0x00000C00  /* Owner of sem 5 */
+#define ARM_SD_OWN6      0x00003000  /* Owner of sem 6 */
+#define ARM_SD_OWN7      0x0000C000  /* Owner of sem 7 */
+#define ARM_SD_SEM0      0x00010000  /* Status of sem 0 */
+#define ARM_SD_SEM1      0x00020000  /* Status of sem 1 */
+#define ARM_SD_SEM2      0x00040000  /* Status of sem 2 */
+#define ARM_SD_SEM3      0x00080000  /* Status of sem 3 */
+#define ARM_SD_SEM4      0x00100000  /* Status of sem 4 */
+#define ARM_SD_SEM5      0x00200000  /* Status of sem 5 */
+#define ARM_SD_SEM6      0x00400000  /* Status of sem 6 */
+#define ARM_SD_SEM7      0x00800000  /* Status of sem 7 */
+
+/* Doorbells clear/debug register (...0xE4) */
+#define ARM_BD_OWN0      0x00000003  /* Owner of doorbell 0 */
+#define ARM_BD_OWN1      0x0000000C  /* Owner of doorbell 1 */
+#define ARM_BD_OWN2      0x00000030  /* Owner of doorbell 2 */
+#define ARM_BD_OWN3      0x000000C0  /* Owner of doorbell 3 */
+#define ARM_BD_BELL0     0x00000100  /* Status of doorbell 0 */
+#define ARM_BD_BELL1     0x00000200  /* Status of doorbell 1 */
+#define ARM_BD_BELL2     0x00000400  /* Status of doorbell 2 */
+#define ARM_BD_BELL3     0x00000800  /* Status of doorbell 3 */
+
+/* MY IRQS register (...0xF8) */
+#define ARM_MYIRQ_BELL   0x00000001  /* This owner has a doorbell IRQ */
+#define ARM_MYIRQ_MAIL   0x00000002  /* This owner has a mailbox  IRQ */
+
+/* ALL IRQS register (...0xF8) */
+#define ARM_AIS_BELL0 0x00000001  /* Doorbell 0 IRQ pending */
+#define ARM_AIS_BELL1 0x00000002  /* Doorbell 1 IRQ pending */
+#define ARM_AIS_BELL2 0x00000004  /* Doorbell 2 IRQ pending */
+#define ARM_AIS_BELL3 0x00000008  /* Doorbell 3 IRQ pending */
+#define ARM_AIS0_HAVEDATA 0x00000010  /* MAIL 0 has data IRQ pending */
+#define ARM_AIS0_HAVESPAC 0x00000020  /* MAIL 0 has space IRQ pending */
+#define ARM_AIS0_OPPEMPTY 0x00000040  /* MAIL 0 opposite is empty IRQ */
+#define ARM_AIS1_HAVEDATA 0x00000080  /* MAIL 1 has data IRQ pending */
+#define ARM_AIS1_HAVESPAC 0x00000100  /* MAIL 1 has space IRQ pending */
+#define ARM_AIS1_OPPEMPTY 0x00000200  /* MAIL 1 opposite is empty IRQ */
+/* Note   that bell-0, bell-1 and MAIL0 IRQ go only to the ARM */
+/* Whilst that bell-2, bell-3 and MAIL1 IRQ go only to the VC */
+/* */
+/* ARM JTAG BASH */
+/* */
+#define AJB_BASE 0x7e2000c0
+
+#define AJBCONF HW_REGISTER_RW(AJB_BASE+0x00)
+#define   AJB_BITS0    0x000000
+#define   AJB_BITS4    0x000004
+#define   AJB_BITS8    0x000008
+#define   AJB_BITS12   0x00000C
+#define   AJB_BITS16   0x000010
+#define   AJB_BITS20   0x000014
+#define   AJB_BITS24   0x000018
+#define   AJB_BITS28   0x00001C
+#define   AJB_BITS32   0x000020
+#define   AJB_BITS34   0x000022
+#define   AJB_OUT_MS   0x000040
+#define   AJB_OUT_LS   0x000000
+#define   AJB_INV_CLK  0x000080
+#define   AJB_D0_RISE  0x000100
+#define   AJB_D0_FALL  0x000000
+#define   AJB_D1_RISE  0x000200
+#define   AJB_D1_FALL  0x000000
+#define   AJB_IN_RISE  0x000400
+#define   AJB_IN_FALL  0x000000
+#define   AJB_ENABLE   0x000800
+#define   AJB_HOLD0    0x000000
+#define   AJB_HOLD1    0x001000
+#define   AJB_HOLD2    0x002000
+#define   AJB_HOLD3    0x003000
+#define   AJB_RESETN   0x004000
+#define   AJB_CLKSHFT  16
+#define   AJB_BUSY     0x80000000
+#define AJBTMS HW_REGISTER_RW(AJB_BASE+0x04)
+#define AJBTDI HW_REGISTER_RW(AJB_BASE+0x08)
+#define AJBTDO HW_REGISTER_RW(AJB_BASE+0x0c)
+
+#endif

arch/arm/mach-bcm2708/include/mach/arm_power.h

@@ -0,0 +1,60 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/include/mach/arm_power.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ARM_POWER_H
+#define _ARM_POWER_H
+
+/* Use meaningful names on each side */
+#ifdef __VIDEOCORE__
+#define PREFIX(x) ARM_##x
+#else
+#define PREFIX(x) BCM_##x
+#endif
+
+enum {
+	PREFIX(POWER_SDCARD_BIT),
+	PREFIX(POWER_UART_BIT),
+	PREFIX(POWER_MINIUART_BIT),
+	PREFIX(POWER_USB_BIT),
+	PREFIX(POWER_I2C0_BIT),
+	PREFIX(POWER_I2C1_BIT),
+	PREFIX(POWER_I2C2_BIT),
+	PREFIX(POWER_SPI_BIT),
+	PREFIX(POWER_CCP2TX_BIT),
+
+	PREFIX(POWER_MAX)
+};
+
+enum {
+	PREFIX(POWER_SDCARD) = (1 << PREFIX(POWER_SDCARD_BIT)),
+	PREFIX(POWER_UART) = (1 << PREFIX(POWER_UART_BIT)),
+	PREFIX(POWER_MINIUART) = (1 << PREFIX(POWER_MINIUART_BIT)),
+	PREFIX(POWER_USB) = (1 << PREFIX(POWER_USB_BIT)),
+	PREFIX(POWER_I2C0) = (1 << PREFIX(POWER_I2C0_BIT)),
+	PREFIX(POWER_I2C1_MASK) = (1 << PREFIX(POWER_I2C1_BIT)),
+	PREFIX(POWER_I2C2_MASK) = (1 << PREFIX(POWER_I2C2_BIT)),
+	PREFIX(POWER_SPI_MASK) = (1 << PREFIX(POWER_SPI_BIT)),
+	PREFIX(POWER_CCP2TX_MASK) = (1 << PREFIX(POWER_CCP2TX_BIT)),
+
+	PREFIX(POWER_MASK) = (1 << PREFIX(POWER_MAX)) - 1,
+	PREFIX(POWER_NONE) = 0
+};
+
+#endif

arch/arm/mach-bcm2708/include/mach/clkdev.h

@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif

arch/arm/mach-bcm2708/include/mach/debug-macro.S

@@ -0,0 +1,22 @@
+/* arch/arm/mach-bcm2708/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2010 Broadcom
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <mach/platform.h>
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, =UART0_BASE
+		ldr	\rv, =IO_ADDRESS(UART0_BASE)
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>

arch/arm/mach-bcm2708/include/mach/dma.h

@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/include/mach/dma.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#ifndef _MACH_BCM2708_DMA_H
+#define _MACH_BCM2708_DMA_H
+
+#define BCM_DMAMAN_DRIVER_NAME "bcm2708_dma"
+
+/* DMA CS Control and Status bits */
+#define BCM2708_DMA_ACTIVE	(1 << 0)
+#define BCM2708_DMA_INT		(1 << 2)
+#define BCM2708_DMA_ISPAUSED	(1 << 4)  /* Pause requested or not active */
+#define BCM2708_DMA_ISHELD	(1 << 5)  /* Is held by DREQ flow control */
+#define BCM2708_DMA_ERR		(1 << 8)
+#define BCM2708_DMA_ABORT	(1 << 30) /* stop current CB, go to next, WO */
+#define BCM2708_DMA_RESET	(1 << 31) /* WO, self clearing */
+
+/* DMA control block "info" field bits */
+#define BCM2708_DMA_INT_EN	(1 << 0)
+#define BCM2708_DMA_TDMODE	(1 << 1)
+#define BCM2708_DMA_WAIT_RESP	(1 << 3)
+#define BCM2708_DMA_D_INC	(1 << 4)
+#define BCM2708_DMA_D_WIDTH	(1 << 5)
+#define BCM2708_DMA_D_DREQ	(1 << 6)
+#define BCM2708_DMA_S_INC	(1 << 8)
+#define BCM2708_DMA_S_WIDTH	(1 << 9)
+#define BCM2708_DMA_S_DREQ	(1 << 10)
+
+#define	BCM2708_DMA_BURST(x)	(((x)&0xf) << 12)
+#define	BCM2708_DMA_PER_MAP(x)	((x) << 16)
+#define	BCM2708_DMA_WAITS(x)	(((x)&0x1f) << 21)
+
+#define BCM2708_DMA_DREQ_EMMC	11
+#define BCM2708_DMA_DREQ_SDHOST	13
+
+#define BCM2708_DMA_CS		0x00 /* Control and Status */
+#define BCM2708_DMA_ADDR	0x04
+/* the current control block appears in the following registers - read only */
+#define BCM2708_DMA_INFO	0x08
+#define BCM2708_DMA_NEXTCB	0x1C
+#define BCM2708_DMA_DEBUG	0x20
+
+#define BCM2708_DMA4_CS		(BCM2708_DMA_CHAN(4)+BCM2708_DMA_CS)
+#define BCM2708_DMA4_ADDR	(BCM2708_DMA_CHAN(4)+BCM2708_DMA_ADDR)
+
+#define BCM2708_DMA_TDMODE_LEN(w, h) ((h) << 16 | (w))
+
+struct bcm2708_dma_cb {
+	unsigned long info;
+	unsigned long src;
+	unsigned long dst;
+	unsigned long length;
+	unsigned long stride;
+	unsigned long next;
+	unsigned long pad[2];
+};
+
+extern int bcm_sg_suitable_for_dma(struct scatterlist *sg_ptr, int sg_len);
+extern void bcm_dma_start(void __iomem *dma_chan_base,
+			  dma_addr_t control_block);
+extern void bcm_dma_wait_idle(void __iomem *dma_chan_base);
+extern int /*rc*/ bcm_dma_abort(void __iomem *dma_chan_base);
+
+/* When listing features we can ask for when allocating DMA channels give
+   those with higher priority smaller ordinal numbers */
+#define BCM_DMA_FEATURE_FAST_ORD 0
+#define BCM_DMA_FEATURE_FAST	 (1<<BCM_DMA_FEATURE_FAST_ORD)
+#define BCM_DMA_FEATURE_COUNT	 1
+
+/* return channel no or -ve error */
+extern int bcm_dma_chan_alloc(unsigned preferred_feature_set,
+			      void __iomem **out_dma_base, int *out_dma_irq);
+extern int bcm_dma_chan_free(int channel);
+
+
+#endif /* _MACH_BCM2708_DMA_H */

arch/arm/mach-bcm2708/include/mach/entry-macro.S

@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for BCM2708 platforms
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/hardware.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =IO_ADDRESS(ARMCTRL_IC_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		/* get masked status */
+		ldr	\irqstat, [\base, #(ARM_IRQ_PEND0 - ARMCTRL_IC_BASE)]
+		mov	\irqnr, #(ARM_IRQ0_BASE + 31)
+		and	\tmp, \irqstat, #0x300		 @ save bits 8 and 9
+		/* clear bits 8 and 9, and test */
+		bics	\irqstat, \irqstat, #0x300
+		bne	1010f
+
+		tst	\tmp, #0x100
+		ldrne	\irqstat, [\base, #(ARM_IRQ_PEND1 - ARMCTRL_IC_BASE)]
+		movne \irqnr, #(ARM_IRQ1_BASE + 31)
+		@ Mask out the interrupts also present in PEND0 - see SW-5809
+		bicne \irqstat, #((1<<7) | (1<<9) | (1<<10))
+		bicne \irqstat, #((1<<18) | (1<<19))
+		bne	1010f
+
+		tst	\tmp, #0x200
+		ldrne \irqstat, [\base, #(ARM_IRQ_PEND2 - ARMCTRL_IC_BASE)]
+		movne \irqnr, #(ARM_IRQ2_BASE + 31)
+		@ Mask out the interrupts also present in PEND0 - see SW-5809
+		bicne \irqstat, #((1<<21) | (1<<22) | (1<<23) | (1<<24) | (1<<25))
+		bicne \irqstat, #((1<<30))
+		beq 1020f
+
+1010:
+		@ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1))
+		@ N.B. CLZ is an ARM5 instruction.
+		sub	\tmp, \irqstat, #1
+		eor	\irqstat, \irqstat, \tmp
+		clz	\tmp, \irqstat
+		sub	\irqnr, \tmp
+
+1020:	@ EQ will be set if no irqs pending
+
+		.endm

arch/arm/mach-bcm2708/include/mach/frc.h

@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-bcm2708/include/mach/timex.h
+ *
+ *  BCM2708 free running counter (timer)
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _MACH_FRC_H
+#define _MACH_FRC_H
+
+#define FRC_TICK_RATE		(1000000)
+
+/*! Free running counter incrementing at the CLOCK_TICK_RATE
+    (slightly faster than frc_clock_ticks63()
+ */
+extern unsigned long frc_clock_ticks32(void);
+
+/*! Free running counter incrementing at the CLOCK_TICK_RATE
+ *  Note - top bit should be ignored (see cnt32_to_63)
+ */
+extern unsigned long long frc_clock_ticks63(void);
+
+#endif

arch/arm/mach-bcm2708/include/mach/gpio.h

@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#define ARCH_NR_GPIOS 54 // number of gpio lines
+
+#include <asm-generic/gpio.h>
+#include <mach/platform.h>
+#include <mach/irqs.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned gpio)
+{
+        return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+        __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+        return __gpio_cansleep(gpio);
+}
+
+
+static inline unsigned irq_to_gpio(unsigned irq) {
+	return (irq-GPIO_IRQ_START);
+}
+
+static inline unsigned gpio_to_irq(unsigned gpio) {
+	return GPIO_IRQ_START+gpio;
+}
+#endif /* CONFIG_GPIOLIB */
+
+#endif

arch/arm/mach-bcm2708/include/mach/hardware.h

@@ -0,0 +1,28 @@
+/*
+ *  arch/arm/mach-bcm2708/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the BCM2708 devices.
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+#endif

arch/arm/mach-bcm2708/include/mach/io.h

@@ -0,0 +1,28 @@
+/*
+ *  arch/arm/mach-bcm2708/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif

arch/arm/mach-bcm2708/include/mach/irqs.h

@@ -0,0 +1,196 @@
+/*
+ *  arch/arm/mach-bcm2708/include/mach/irqs.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _BCM2708_IRQS_H_
+#define _BCM2708_IRQS_H_
+
+#include <mach/platform.h>
+
+/*
+ *  IRQ interrupts definitions are the same as the INT definitions
+ *  held within platform.h
+ */
+#define IRQ_ARMCTRL_START     0
+#define IRQ_TIMER0            (IRQ_ARMCTRL_START + INTERRUPT_TIMER0)
+#define IRQ_TIMER1            (IRQ_ARMCTRL_START + INTERRUPT_TIMER1)
+#define IRQ_TIMER2            (IRQ_ARMCTRL_START + INTERRUPT_TIMER2)
+#define IRQ_TIMER3            (IRQ_ARMCTRL_START + INTERRUPT_TIMER3)
+#define IRQ_CODEC0            (IRQ_ARMCTRL_START + INTERRUPT_CODEC0)
+#define IRQ_CODEC1            (IRQ_ARMCTRL_START + INTERRUPT_CODEC1)
+#define IRQ_CODEC2            (IRQ_ARMCTRL_START + INTERRUPT_CODEC2)
+#define IRQ_JPEG              (IRQ_ARMCTRL_START + INTERRUPT_JPEG)
+#define IRQ_ISP               (IRQ_ARMCTRL_START + INTERRUPT_ISP)
+#define IRQ_USB               (IRQ_ARMCTRL_START + INTERRUPT_USB)
+#define IRQ_3D                (IRQ_ARMCTRL_START + INTERRUPT_3D)
+#define IRQ_TRANSPOSER        (IRQ_ARMCTRL_START + INTERRUPT_TRANSPOSER)
+#define IRQ_MULTICORESYNC0    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC0)
+#define IRQ_MULTICORESYNC1    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC1)
+#define IRQ_MULTICORESYNC2    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC2)
+#define IRQ_MULTICORESYNC3    (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC3)
+#define IRQ_DMA0              (IRQ_ARMCTRL_START + INTERRUPT_DMA0)
+#define IRQ_DMA1              (IRQ_ARMCTRL_START + INTERRUPT_DMA1)
+#define IRQ_DMA2              (IRQ_ARMCTRL_START + INTERRUPT_DMA2)
+#define IRQ_DMA3              (IRQ_ARMCTRL_START + INTERRUPT_DMA3)
+#define IRQ_DMA4              (IRQ_ARMCTRL_START + INTERRUPT_DMA4)
+#define IRQ_DMA5              (IRQ_ARMCTRL_START + INTERRUPT_DMA5)
+#define IRQ_DMA6              (IRQ_ARMCTRL_START + INTERRUPT_DMA6)
+#define IRQ_DMA7              (IRQ_ARMCTRL_START + INTERRUPT_DMA7)
+#define IRQ_DMA8              (IRQ_ARMCTRL_START + INTERRUPT_DMA8)
+#define IRQ_DMA9              (IRQ_ARMCTRL_START + INTERRUPT_DMA9)
+#define IRQ_DMA10             (IRQ_ARMCTRL_START + INTERRUPT_DMA10)
+#define IRQ_DMA11             (IRQ_ARMCTRL_START + INTERRUPT_DMA11)
+#define IRQ_DMA12             (IRQ_ARMCTRL_START + INTERRUPT_DMA12)
+#define IRQ_AUX               (IRQ_ARMCTRL_START + INTERRUPT_AUX)
+#define IRQ_ARM               (IRQ_ARMCTRL_START + INTERRUPT_ARM)
+#define IRQ_VPUDMA            (IRQ_ARMCTRL_START + INTERRUPT_VPUDMA)
+#define IRQ_HOSTPORT          (IRQ_ARMCTRL_START + INTERRUPT_HOSTPORT)
+#define IRQ_VIDEOSCALER       (IRQ_ARMCTRL_START + INTERRUPT_VIDEOSCALER)
+#define IRQ_CCP2TX            (IRQ_ARMCTRL_START + INTERRUPT_CCP2TX)
+#define IRQ_SDC               (IRQ_ARMCTRL_START + INTERRUPT_SDC)
+#define IRQ_DSI0              (IRQ_ARMCTRL_START + INTERRUPT_DSI0)
+#define IRQ_AVE               (IRQ_ARMCTRL_START + INTERRUPT_AVE)
+#define IRQ_CAM0              (IRQ_ARMCTRL_START + INTERRUPT_CAM0)
+#define IRQ_CAM1              (IRQ_ARMCTRL_START + INTERRUPT_CAM1)
+#define IRQ_HDMI0             (IRQ_ARMCTRL_START + INTERRUPT_HDMI0)
+#define IRQ_HDMI1             (IRQ_ARMCTRL_START + INTERRUPT_HDMI1)
+#define IRQ_PIXELVALVE1       (IRQ_ARMCTRL_START + INTERRUPT_PIXELVALVE1)
+#define IRQ_I2CSPISLV         (IRQ_ARMCTRL_START + INTERRUPT_I2CSPISLV)
+#define IRQ_DSI1              (IRQ_ARMCTRL_START + INTERRUPT_DSI1)
+#define IRQ_PWA0              (IRQ_ARMCTRL_START + INTERRUPT_PWA0)
+#define IRQ_PWA1              (IRQ_ARMCTRL_START + INTERRUPT_PWA1)
+#define IRQ_CPR               (IRQ_ARMCTRL_START + INTERRUPT_CPR)
+#define IRQ_SMI               (IRQ_ARMCTRL_START + INTERRUPT_SMI)
+#define IRQ_GPIO0             (IRQ_ARMCTRL_START + INTERRUPT_GPIO0)
+#define IRQ_GPIO1             (IRQ_ARMCTRL_START + INTERRUPT_GPIO1)
+#define IRQ_GPIO2             (IRQ_ARMCTRL_START + INTERRUPT_GPIO2)
+#define IRQ_GPIO3             (IRQ_ARMCTRL_START + INTERRUPT_GPIO3)
+#define IRQ_I2C               (IRQ_ARMCTRL_START + INTERRUPT_I2C)
+#define IRQ_SPI               (IRQ_ARMCTRL_START + INTERRUPT_SPI)
+#define IRQ_I2SPCM            (IRQ_ARMCTRL_START + INTERRUPT_I2SPCM)
+#define IRQ_SDIO              (IRQ_ARMCTRL_START + INTERRUPT_SDIO)
+#define IRQ_UART              (IRQ_ARMCTRL_START + INTERRUPT_UART)
+#define IRQ_SLIMBUS           (IRQ_ARMCTRL_START + INTERRUPT_SLIMBUS)
+#define IRQ_VEC               (IRQ_ARMCTRL_START + INTERRUPT_VEC)
+#define IRQ_CPG               (IRQ_ARMCTRL_START + INTERRUPT_CPG)
+#define IRQ_RNG               (IRQ_ARMCTRL_START + INTERRUPT_RNG)
+#define IRQ_ARASANSDIO        (IRQ_ARMCTRL_START + INTERRUPT_ARASANSDIO)
+#define IRQ_AVSPMON           (IRQ_ARMCTRL_START + INTERRUPT_AVSPMON)
+
+#define IRQ_ARM_TIMER         (IRQ_ARMCTRL_START + INTERRUPT_ARM_TIMER)
+#define IRQ_ARM_MAILBOX       (IRQ_ARMCTRL_START + INTERRUPT_ARM_MAILBOX)
+#define IRQ_ARM_DOORBELL_0    (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_0)
+#define IRQ_ARM_DOORBELL_1    (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_1)
+#define IRQ_VPU0_HALTED       (IRQ_ARMCTRL_START + INTERRUPT_VPU0_HALTED)
+#define IRQ_VPU1_HALTED       (IRQ_ARMCTRL_START + INTERRUPT_VPU1_HALTED)
+#define IRQ_ILLEGAL_TYPE0     (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE0)
+#define IRQ_ILLEGAL_TYPE1     (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE1)
+#define IRQ_PENDING1          (IRQ_ARMCTRL_START + INTERRUPT_PENDING1)
+#define IRQ_PENDING2          (IRQ_ARMCTRL_START + INTERRUPT_PENDING2)
+
+/*
+ *  FIQ interrupts definitions are the same as the INT definitions.
+ */
+#define FIQ_TIMER0            INT_TIMER0
+#define FIQ_TIMER1            INT_TIMER1
+#define FIQ_TIMER2            INT_TIMER2
+#define FIQ_TIMER3            INT_TIMER3
+#define FIQ_CODEC0            INT_CODEC0
+#define FIQ_CODEC1            INT_CODEC1
+#define FIQ_CODEC2            INT_CODEC2
+#define FIQ_JPEG              INT_JPEG
+#define FIQ_ISP               INT_ISP
+#define FIQ_USB               INT_USB
+#define FIQ_3D                INT_3D
+#define FIQ_TRANSPOSER        INT_TRANSPOSER
+#define FIQ_MULTICORESYNC0    INT_MULTICORESYNC0
+#define FIQ_MULTICORESYNC1    INT_MULTICORESYNC1
+#define FIQ_MULTICORESYNC2    INT_MULTICORESYNC2
+#define FIQ_MULTICORESYNC3    INT_MULTICORESYNC3
+#define FIQ_DMA0              INT_DMA0
+#define FIQ_DMA1              INT_DMA1
+#define FIQ_DMA2              INT_DMA2
+#define FIQ_DMA3              INT_DMA3
+#define FIQ_DMA4              INT_DMA4
+#define FIQ_DMA5              INT_DMA5
+#define FIQ_DMA6              INT_DMA6
+#define FIQ_DMA7              INT_DMA7
+#define FIQ_DMA8              INT_DMA8
+#define FIQ_DMA9              INT_DMA9
+#define FIQ_DMA10             INT_DMA10
+#define FIQ_DMA11             INT_DMA11
+#define FIQ_DMA12             INT_DMA12
+#define FIQ_AUX               INT_AUX
+#define FIQ_ARM               INT_ARM
+#define FIQ_VPUDMA            INT_VPUDMA
+#define FIQ_HOSTPORT          INT_HOSTPORT
+#define FIQ_VIDEOSCALER       INT_VIDEOSCALER
+#define FIQ_CCP2TX            INT_CCP2TX
+#define FIQ_SDC               INT_SDC
+#define FIQ_DSI0              INT_DSI0
+#define FIQ_AVE               INT_AVE
+#define FIQ_CAM0              INT_CAM0
+#define FIQ_CAM1              INT_CAM1
+#define FIQ_HDMI0             INT_HDMI0
+#define FIQ_HDMI1             INT_HDMI1
+#define FIQ_PIXELVALVE1       INT_PIXELVALVE1
+#define FIQ_I2CSPISLV         INT_I2CSPISLV
+#define FIQ_DSI1              INT_DSI1
+#define FIQ_PWA0              INT_PWA0
+#define FIQ_PWA1              INT_PWA1
+#define FIQ_CPR               INT_CPR
+#define FIQ_SMI               INT_SMI
+#define FIQ_GPIO0             INT_GPIO0
+#define FIQ_GPIO1             INT_GPIO1
+#define FIQ_GPIO2             INT_GPIO2
+#define FIQ_GPIO3             INT_GPIO3
+#define FIQ_I2C               INT_I2C
+#define FIQ_SPI               INT_SPI
+#define FIQ_I2SPCM            INT_I2SPCM
+#define FIQ_SDIO              INT_SDIO
+#define FIQ_UART              INT_UART
+#define FIQ_SLIMBUS           INT_SLIMBUS
+#define FIQ_VEC               INT_VEC
+#define FIQ_CPG               INT_CPG
+#define FIQ_RNG               INT_RNG
+#define FIQ_ARASANSDIO        INT_ARASANSDIO
+#define FIQ_AVSPMON           INT_AVSPMON
+
+#define FIQ_ARM_TIMER         INT_ARM_TIMER
+#define FIQ_ARM_MAILBOX       INT_ARM_MAILBOX
+#define FIQ_ARM_DOORBELL_0    INT_ARM_DOORBELL_0
+#define FIQ_ARM_DOORBELL_1    INT_ARM_DOORBELL_1
+#define FIQ_VPU0_HALTED       INT_VPU0_HALTED
+#define FIQ_VPU1_HALTED       INT_VPU1_HALTED
+#define FIQ_ILLEGAL_TYPE0     INT_ILLEGAL_TYPE0
+#define FIQ_ILLEGAL_TYPE1     INT_ILLEGAL_TYPE1
+#define FIQ_PENDING1          INT_PENDING1
+#define FIQ_PENDING2          INT_PENDING2
+
+#define HARD_IRQS	      (64 + 21)
+#define GPIO_IRQ_START	      HARD_IRQS
+
+#define GPIO_IRQS	      32*5
+
+#define NR_IRQS		      HARD_IRQS+GPIO_IRQS
+
+
+#endif /* _BCM2708_IRQS_H_ */

arch/arm/mach-bcm2708/include/mach/memory.h

@@ -0,0 +1,64 @@
+/*
+ *  arch/arm/mach-bcm2708/include/mach/memory.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* Memory overview:
+
+   [ARMcore] <--virtual addr-->
+   [ARMmmu] <--physical addr-->
+   [GERTmap] <--bus add-->
+   [VCperiph]
+
+*/
+
+/*
+ * Physical DRAM offset.
+ */
+#define PLAT_PHYS_OFFSET	UL(0x00000000)
+#define VC_ARMMEM_OFFSET	UL(0x00000000)   /* offset in VC of ARM memory */
+
+#ifdef CONFIG_BCM2708_NOL2CACHE
+ #define _REAL_BUS_OFFSET UL(0xC0000000)   /* don't use L1 or L2 caches */
+#else
+ #define _REAL_BUS_OFFSET UL(0x40000000)   /* use L2 cache */
+#endif
+
+/* We're using the memory at 64M in the VideoCore for Linux - this adjustment
+ * will provide the offset into this area as well as setting the bits that
+ * stop the L1 and L2 cache from being used
+ *
+ * WARNING: this only works because the ARM is given memory at a fixed location
+ *          (ARMMEM_OFFSET)
+ */
+#define BUS_OFFSET          (VC_ARMMEM_OFFSET + _REAL_BUS_OFFSET)
+#define __virt_to_bus(x)    ((x) + (BUS_OFFSET - PAGE_OFFSET))
+#define __bus_to_virt(x)    ((x) - (BUS_OFFSET - PAGE_OFFSET))
+#define __pfn_to_bus(x)     (__pfn_to_phys(x) + (BUS_OFFSET - PLAT_PHYS_OFFSET))
+#define __bus_to_pfn(x)     __phys_to_pfn((x) - (BUS_OFFSET - PLAT_PHYS_OFFSET))
+
+/*
+ * Consistent DMA area set to 2M. Framebuffer now allocated on host
+ */
+
+
+#define CONSISTENT_DMA_SIZE 0x00200000
+
+#endif

arch/arm/mach-bcm2708/include/mach/platform.h

@@ -0,0 +1,223 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/platform.h
+ *
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _BCM2708_PLATFORM_H
+#define _BCM2708_PLATFORM_H
+
+
+/* macros to get at IO space when running virtually */
+#define IO_ADDRESS(x)	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+
+#define __io_address(a)     __io(IO_ADDRESS(a))
+
+
+/*
+ *  SDRAM
+ */
+#define BCM2708_SDRAM_BASE           0x00000000
+
+/*
+ *  Logic expansion modules
+ *
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  BCM2708 ARMCTRL Registers
+ * ------------------------------------------------------------------------
+ */
+
+#define HW_REGISTER_RW(addr) (addr)
+#define HW_REGISTER_RO(addr) (addr)
+
+#include "arm_control.h"
+#undef ARM_BASE
+
+/*
+ * Definitions and addresses for the ARM CONTROL logic
+ * This file is manually generated.
+ */
+
+#define BCM2708_PERI_BASE        0x20000000
+#define ST_BASE                  (BCM2708_PERI_BASE + 0x3000)   /* System Timer */
+#define DMA_BASE		 (BCM2708_PERI_BASE + 0x7000)	/* DMA controller */
+#define ARM_BASE                 (BCM2708_PERI_BASE + 0xB000)	 /* BCM2708 ARM control block */
+#define PM_BASE			 (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */
+#define GPIO_BASE                (BCM2708_PERI_BASE + 0x200000) /* GPIO */
+#define UART0_BASE               (BCM2708_PERI_BASE + 0x201000)	/* Uart 0 */
+#define MMCI0_BASE               (BCM2708_PERI_BASE + 0x202000) /* MMC interface */
+#define SPI0_BASE		 (BCM2708_PERI_BASE + 0x204000) /* SPI0 */
+#define BSC0_BASE		 (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
+#define UART1_BASE               (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */
+#define EMMC_BASE                (BCM2708_PERI_BASE + 0x300000) /* eMMC interface */
+#define SMI_BASE		 (BCM2708_PERI_BASE + 0x600000) /* SMI */
+#define BSC1_BASE		 (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */
+#define USB_BASE                 (BCM2708_PERI_BASE + 0x980000) /* DTC_OTG USB controller */
+#define MCORE_BASE               (BCM2708_PERI_BASE + 0x0000)   /* Fake frame buffer device (actually the multicore sync block*/
+
+#define ARMCTRL_BASE             (ARM_BASE + 0x000)
+#define ARMCTRL_IC_BASE          (ARM_BASE + 0x200)           /* ARM interrupt controller */
+#define ARMCTRL_TIMER0_1_BASE    (ARM_BASE + 0x400)           /* Timer 0 and 1 */
+#define ARMCTRL_0_SBM_BASE       (ARM_BASE + 0x800)           /* User 0 (ARM)'s Semaphores Doorbells and Mailboxes */
+
+
+/*
+ * Interrupt assignments
+ */
+
+#define ARM_IRQ1_BASE                  0
+#define INTERRUPT_TIMER0               (ARM_IRQ1_BASE + 0)
+#define INTERRUPT_TIMER1               (ARM_IRQ1_BASE + 1)
+#define INTERRUPT_TIMER2               (ARM_IRQ1_BASE + 2)
+#define INTERRUPT_TIMER3               (ARM_IRQ1_BASE + 3)
+#define INTERRUPT_CODEC0               (ARM_IRQ1_BASE + 4)
+#define INTERRUPT_CODEC1               (ARM_IRQ1_BASE + 5)
+#define INTERRUPT_CODEC2               (ARM_IRQ1_BASE + 6)
+#define INTERRUPT_VC_JPEG              (ARM_IRQ1_BASE + 7)
+#define INTERRUPT_ISP                  (ARM_IRQ1_BASE + 8)
+#define INTERRUPT_VC_USB               (ARM_IRQ1_BASE + 9)
+#define INTERRUPT_VC_3D                (ARM_IRQ1_BASE + 10)
+#define INTERRUPT_TRANSPOSER           (ARM_IRQ1_BASE + 11)
+#define INTERRUPT_MULTICORESYNC0       (ARM_IRQ1_BASE + 12)
+#define INTERRUPT_MULTICORESYNC1       (ARM_IRQ1_BASE + 13)
+#define INTERRUPT_MULTICORESYNC2       (ARM_IRQ1_BASE + 14)
+#define INTERRUPT_MULTICORESYNC3       (ARM_IRQ1_BASE + 15)
+#define INTERRUPT_DMA0                 (ARM_IRQ1_BASE + 16)
+#define INTERRUPT_DMA1                 (ARM_IRQ1_BASE + 17)
+#define INTERRUPT_VC_DMA2              (ARM_IRQ1_BASE + 18)
+#define INTERRUPT_VC_DMA3              (ARM_IRQ1_BASE + 19)
+#define INTERRUPT_DMA4                 (ARM_IRQ1_BASE + 20)
+#define INTERRUPT_DMA5                 (ARM_IRQ1_BASE + 21)
+#define INTERRUPT_DMA6                 (ARM_IRQ1_BASE + 22)
+#define INTERRUPT_DMA7                 (ARM_IRQ1_BASE + 23)
+#define INTERRUPT_DMA8                 (ARM_IRQ1_BASE + 24)
+#define INTERRUPT_DMA9                 (ARM_IRQ1_BASE + 25)
+#define INTERRUPT_DMA10                (ARM_IRQ1_BASE + 26)
+#define INTERRUPT_DMA11                (ARM_IRQ1_BASE + 27)
+#define INTERRUPT_DMA12                (ARM_IRQ1_BASE + 28)
+#define INTERRUPT_AUX                (ARM_IRQ1_BASE + 29)
+#define INTERRUPT_ARM                  (ARM_IRQ1_BASE + 30)
+#define INTERRUPT_VPUDMA               (ARM_IRQ1_BASE + 31)
+
+#define ARM_IRQ2_BASE                  32
+#define INTERRUPT_HOSTPORT             (ARM_IRQ2_BASE + 0)
+#define INTERRUPT_VIDEOSCALER          (ARM_IRQ2_BASE + 1)
+#define INTERRUPT_CCP2TX               (ARM_IRQ2_BASE + 2)
+#define INTERRUPT_SDC                  (ARM_IRQ2_BASE + 3)
+#define INTERRUPT_DSI0                 (ARM_IRQ2_BASE + 4)
+#define INTERRUPT_AVE                  (ARM_IRQ2_BASE + 5)
+#define INTERRUPT_CAM0                 (ARM_IRQ2_BASE + 6)
+#define INTERRUPT_CAM1                 (ARM_IRQ2_BASE + 7)
+#define INTERRUPT_HDMI0                (ARM_IRQ2_BASE + 8)
+#define INTERRUPT_HDMI1                (ARM_IRQ2_BASE + 9)
+#define INTERRUPT_PIXELVALVE1          (ARM_IRQ2_BASE + 10)
+#define INTERRUPT_I2CSPISLV            (ARM_IRQ2_BASE + 11)
+#define INTERRUPT_DSI1                 (ARM_IRQ2_BASE + 12)
+#define INTERRUPT_PWA0                 (ARM_IRQ2_BASE + 13)
+#define INTERRUPT_PWA1                 (ARM_IRQ2_BASE + 14)
+#define INTERRUPT_CPR                  (ARM_IRQ2_BASE + 15)
+#define INTERRUPT_SMI                  (ARM_IRQ2_BASE + 16)
+#define INTERRUPT_GPIO0                (ARM_IRQ2_BASE + 17)
+#define INTERRUPT_GPIO1                (ARM_IRQ2_BASE + 18)
+#define INTERRUPT_GPIO2                (ARM_IRQ2_BASE + 19)
+#define INTERRUPT_GPIO3                (ARM_IRQ2_BASE + 20)
+#define INTERRUPT_VC_I2C               (ARM_IRQ2_BASE + 21)
+#define INTERRUPT_VC_SPI               (ARM_IRQ2_BASE + 22)
+#define INTERRUPT_VC_I2SPCM            (ARM_IRQ2_BASE + 23)
+#define INTERRUPT_VC_SDIO              (ARM_IRQ2_BASE + 24)
+#define INTERRUPT_VC_UART              (ARM_IRQ2_BASE + 25)
+#define INTERRUPT_SLIMBUS              (ARM_IRQ2_BASE + 26)
+#define INTERRUPT_VEC                  (ARM_IRQ2_BASE + 27)
+#define INTERRUPT_CPG                  (ARM_IRQ2_BASE + 28)
+#define INTERRUPT_RNG                  (ARM_IRQ2_BASE + 29)
+#define INTERRUPT_VC_ARASANSDIO        (ARM_IRQ2_BASE + 30)
+#define INTERRUPT_AVSPMON              (ARM_IRQ2_BASE + 31)
+
+#define ARM_IRQ0_BASE                  64
+#define INTERRUPT_ARM_TIMER            (ARM_IRQ0_BASE + 0)
+#define INTERRUPT_ARM_MAILBOX          (ARM_IRQ0_BASE + 1)
+#define INTERRUPT_ARM_DOORBELL_0       (ARM_IRQ0_BASE + 2)
+#define INTERRUPT_ARM_DOORBELL_1       (ARM_IRQ0_BASE + 3)
+#define INTERRUPT_VPU0_HALTED          (ARM_IRQ0_BASE + 4)
+#define INTERRUPT_VPU1_HALTED          (ARM_IRQ0_BASE + 5)
+#define INTERRUPT_ILLEGAL_TYPE0        (ARM_IRQ0_BASE + 6)
+#define INTERRUPT_ILLEGAL_TYPE1        (ARM_IRQ0_BASE + 7)
+#define INTERRUPT_PENDING1             (ARM_IRQ0_BASE + 8)
+#define INTERRUPT_PENDING2             (ARM_IRQ0_BASE + 9)
+#define INTERRUPT_JPEG                 (ARM_IRQ0_BASE + 10)
+#define INTERRUPT_USB                  (ARM_IRQ0_BASE + 11)
+#define INTERRUPT_3D                   (ARM_IRQ0_BASE + 12)
+#define INTERRUPT_DMA2                 (ARM_IRQ0_BASE + 13)
+#define INTERRUPT_DMA3                 (ARM_IRQ0_BASE + 14)
+#define INTERRUPT_I2C                  (ARM_IRQ0_BASE + 15)
+#define INTERRUPT_SPI                  (ARM_IRQ0_BASE + 16)
+#define INTERRUPT_I2SPCM               (ARM_IRQ0_BASE + 17)
+#define INTERRUPT_SDIO                 (ARM_IRQ0_BASE + 18)
+#define INTERRUPT_UART                 (ARM_IRQ0_BASE + 19)
+#define INTERRUPT_ARASANSDIO           (ARM_IRQ0_BASE + 20)
+
+#define MAXIRQNUM                      (32 + 32 + 20)
+#define MAXFIQNUM                      (32 + 32 + 20)
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/*
+ *  These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+/*
+ * Watchdog
+ */
+#define PM_RSTC			       (PM_BASE+0x1c)
+#define PM_RSTS			       (PM_BASE+0x20)
+#define PM_WDOG			       (PM_BASE+0x24)
+
+#define PM_WDOG_RESET                                         0000000000
+#define PM_PASSWORD		       0x5a000000
+#define PM_WDOG_TIME_SET	       0x000fffff
+#define PM_RSTC_WRCFG_CLR              0xffffffcf
+#define PM_RSTC_WRCFG_SET              0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET       0x00000020
+#define PM_RSTC_RESET                  0x00000102
+
+#define PM_RSTS_HADPOR_SET                                 0x00001000
+#define PM_RSTS_HADSRH_SET                                 0x00000400
+#define PM_RSTS_HADSRF_SET                                 0x00000200
+#define PM_RSTS_HADSRQ_SET                                 0x00000100
+#define PM_RSTS_HADWRH_SET                                 0x00000040
+#define PM_RSTS_HADWRF_SET                                 0x00000020
+#define PM_RSTS_HADWRQ_SET                                 0x00000010
+#define PM_RSTS_HADDRH_SET                                 0x00000004
+#define PM_RSTS_HADDRF_SET                                 0x00000002
+#define PM_RSTS_HADDRQ_SET                                 0x00000001
+
+#define UART0_CLOCK      3000000
+
+#endif
+
+/* END */

arch/arm/mach-bcm2708/include/mach/power.h

@@ -0,0 +1,26 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/power.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This device provides a shared mechanism for controlling the power to
+ * VideoCore subsystems.
+ */
+
+#ifndef _MACH_BCM2708_POWER_H
+#define _MACH_BCM2708_POWER_H
+
+#include <linux/types.h>
+#include <mach/arm_power.h>
+
+typedef unsigned int BCM_POWER_HANDLE_T;
+
+extern int bcm_power_open(BCM_POWER_HANDLE_T *handle);
+extern int bcm_power_request(BCM_POWER_HANDLE_T handle, uint32_t request);
+extern int bcm_power_close(BCM_POWER_HANDLE_T handle);
+
+#endif

arch/arm/mach-bcm2708/include/mach/system.h

@@ -0,0 +1,53 @@
+/*
+ *  arch/arm/mach-bcm2708/include/mach/system.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	uint32_t pm_rstc, pm_wdog;
+	uint32_t timeout = 10;
+
+	/* Setup watchdog for reset */
+	pm_rstc = readl(IO_ADDRESS(PM_RSTC));
+
+	pm_wdog = PM_PASSWORD | (timeout & PM_WDOG_TIME_SET); // watchdog timer = timer clock / 16; need password (31:16) + value (11:0)
+	pm_rstc = PM_PASSWORD | (pm_rstc & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET;
+
+	writel(pm_wdog, IO_ADDRESS(PM_WDOG));
+	writel(pm_rstc, IO_ADDRESS(PM_RSTC));
+}
+
+#endif

arch/arm/mach-bcm2708/include/mach/timex.h

@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-bcm2708/include/mach/timex.h
+ *
+ *  BCM2708 sysem clock frequency
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(1000000)

arch/arm/mach-bcm2708/include/mach/uncompress.h

@@ -0,0 +1,85 @@
+/*
+ *  arch/arm/mach-bcn2708/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/io.h>
+#include <linux/amba/serial.h>
+#include <mach/hardware.h>
+
+#define UART_BAUD 115200
+
+#define BCM2708_UART_DR	UART0_BASE + UART01x_DR
+#define BCM2708_UART_FR	UART0_BASE + UART01x_FR
+#define BCM2708_UART_IBRD UART0_BASE + UART011_IBRD
+#define BCM2708_UART_FBRD UART0_BASE + UART011_FBRD
+#define BCM2708_UART_LCRH UART0_BASE + UART011_LCRH
+#define BCM2708_UART_CR UART0_BASE + UART011_CR
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	while (__raw_readl(BCM2708_UART_FR) & UART01x_FR_TXFF)
+		barrier();
+
+	__raw_writel(c, BCM2708_UART_DR);
+}
+
+static inline void flush(void)
+{
+	int fr;
+
+	do {
+		fr = __raw_readl(BCM2708_UART_FR);
+		barrier();
+	} while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
+}
+
+static inline void arch_decomp_setup(void)
+{
+	int temp, div, rem, frac;
+
+	temp = 16 * UART_BAUD;
+	div = UART0_CLOCK / temp;
+	rem = UART0_CLOCK % temp;
+	temp = (8 * rem) / UART_BAUD;
+	frac = (temp >> 1) + (temp & 1);
+
+	/* Make sure the UART is disabled before we start */
+	__raw_writel(0, BCM2708_UART_CR);
+
+	/* Set the baud rate */
+	__raw_writel(div, BCM2708_UART_IBRD);
+	__raw_writel(frac, BCM2708_UART_FBRD);
+
+	/* Set the UART to 8n1, FIFO enabled */
+	__raw_writel(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, BCM2708_UART_LCRH);
+
+	/* Enable the UART */
+	__raw_writel(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE,
+			BCM2708_UART_CR);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
+

arch/arm/mach-bcm2708/include/mach/vc_mem.h

@@ -0,0 +1,35 @@
+/*****************************************************************************
+* Copyright 2010 - 2011 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#if !defined( VC_MEM_H )
+#define VC_MEM_H
+
+#include <linux/ioctl.h>
+
+#define VC_MEM_IOC_MAGIC  'v'
+
+#define VC_MEM_IOC_MEM_PHYS_ADDR    _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long )
+#define VC_MEM_IOC_MEM_SIZE         _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int )
+#define VC_MEM_IOC_MEM_BASE         _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int )
+
+#if defined( __KERNEL__ )
+#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF
+
+extern unsigned long mm_vc_mem_phys_addr;
+extern unsigned int  mm_vc_mem_size;
+extern int vc_mem_get_current_size( void );
+#endif
+
+#endif  /* VC_MEM_H */
+

arch/arm/mach-bcm2708/include/mach/vcio.h

@@ -0,0 +1,42 @@
+/*
+ *  arch/arm/mach-bcm2708/include/mach/vcio.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _MACH_BCM2708_VCIO_H
+#define _MACH_BCM2708_VCIO_H
+
+/* Routines to handle I/O via the VideoCore "ARM control" registers
+ * (semaphores, doorbells, mailboxes)
+ */
+
+#define BCM_VCIO_DRIVER_NAME "bcm2708_vcio"
+
+/* Constants shared with the ARM identifying separate mailbox channels */
+#define MBOX_CHAN_POWER   0 /* for use by the power management interface */
+#define MBOX_CHAN_FB      1 /* for use by the frame buffer */
+#define MBOX_CHAN_VUART   2 /* for use by the virtual UART */
+#define MBOX_CHAN_VCHIQ   3 /* for use by the VCHIQ interface */
+#define MBOX_CHAN_LEDS    4 /* for use by the leds interface */
+#define MBOX_CHAN_BUTTONS 5 /* for use by the buttons interface */
+#define MBOX_CHAN_TOUCH   6 /* for use by the touchscreen interface */
+#define MBOX_CHAN_COUNT   7
+
+extern int /*rc*/ bcm_mailbox_read(unsigned chan, uint32_t *data28);
+extern int /*rc*/ bcm_mailbox_write(unsigned chan, uint32_t data28);
+
+#endif

arch/arm/mach-bcm2708/include/mach/vmalloc.h

@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-bcm2708/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		(0xd8000000)

arch/arm/mach-bcm2708/power.c

@@ -0,0 +1,194 @@
+/*
+ *	 linux/arch/arm/mach-bcm2708/power.c
+ *
+ *	 Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This device provides a shared mechanism for controlling the power to
+ * VideoCore subsystems.
+ */
+
+#include <linux/module.h>
+#include <linux/semaphore.h>
+#include <linux/bug.h>
+#include <mach/power.h>
+#include <mach/vcio.h>
+#include <mach/arm_power.h>
+
+#define DRIVER_NAME "bcm2708_power"
+
+#define BCM_POWER_MAXCLIENTS 4
+#define BCM_POWER_NOCLIENT (1<<31)
+
+/* Some drivers expect there devices to be permanently powered */
+#define BCM_POWER_ALWAYS_ON (BCM_POWER_USB)
+
+#if 1
+#define DPRINTK printk
+#else
+#define DPRINTK if (0) printk
+#endif
+
+struct state_struct {
+	uint32_t global_request;
+	uint32_t client_request[BCM_POWER_MAXCLIENTS];
+	struct semaphore client_mutex;
+	struct semaphore mutex;
+} g_state;
+
+int bcm_power_open(BCM_POWER_HANDLE_T *handle)
+{
+	BCM_POWER_HANDLE_T i;
+	int ret = -EBUSY;
+
+	down(&g_state.client_mutex);
+
+	for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) {
+		if (g_state.client_request[i] == BCM_POWER_NOCLIENT) {
+			g_state.client_request[i] = BCM_POWER_NONE;
+			*handle = i;
+			ret = 0;
+			break;
+		}
+	}
+
+	up(&g_state.client_mutex);
+
+	DPRINTK("bcm_power_open() -> %d\n", *handle);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bcm_power_open);
+
+int bcm_power_request(BCM_POWER_HANDLE_T handle, uint32_t request)
+{
+	int rc = 0;
+
+	DPRINTK("bcm_power_request(%d, %x)\n", handle, request);
+
+	if ((handle < BCM_POWER_MAXCLIENTS) &&
+	    (g_state.client_request[handle] != BCM_POWER_NOCLIENT)) {
+		if (down_interruptible(&g_state.mutex) != 0) {
+			DPRINTK("bcm_power_request -> interrupted\n");
+			return -EINTR;
+		}
+
+		if (request != g_state.client_request[handle]) {
+			uint32_t others_request = 0;
+			uint32_t global_request;
+			BCM_POWER_HANDLE_T i;
+
+			for (i = 0; i < BCM_POWER_MAXCLIENTS; i++) {
+				if (i != handle)
+					others_request |=
+					    g_state.client_request[i];
+			}
+			others_request &= ~BCM_POWER_NOCLIENT;
+
+			global_request = request | others_request;
+			if (global_request != g_state.global_request) {
+				uint32_t actual;
+
+				/* Send a request to VideoCore */
+				bcm_mailbox_write(MBOX_CHAN_POWER,
+						  global_request << 4);
+
+				/* Wait for a response during power-up */
+				if (global_request & ~g_state.global_request) {
+					rc = bcm_mailbox_read(MBOX_CHAN_POWER,
+							      &actual);
+					DPRINTK
+					    ("bcm_mailbox_read -> %08x, %d\n",
+					     actual, rc);
+					actual >>= 4;
+				} else {
+					rc = 0;
+					actual = global_request;
+				}
+
+				if (rc == 0) {
+					if (actual != global_request) {
+						printk(KERN_ERR
+						     "%s: prev global %x, new global %x, actual %x, request %x, others_request %x\n",
+						     __func__,
+						     g_state.global_request,
+						     global_request, actual, request, others_request);
+						/* A failure */
+						BUG_ON((others_request & actual)
+						       != others_request);
+						request &= actual;
+						rc = -EIO;
+					}
+
+					g_state.global_request = actual;
+					g_state.client_request[handle] =
+					    request;
+				}
+			}
+		}
+		up(&g_state.mutex);
+	} else {
+		rc = -EINVAL;
+	}
+	DPRINTK("bcm_power_request -> %d\n", rc);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_power_request);
+
+int bcm_power_close(BCM_POWER_HANDLE_T handle)
+{
+	int rc;
+
+	DPRINTK("bcm_power_close(%d)\n", handle);
+
+	rc = bcm_power_request(handle, BCM_POWER_NONE);
+	if (rc == 0)
+		g_state.client_request[handle] = BCM_POWER_NOCLIENT;
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_power_close);
+
+static int __init bcm_power_init(void)
+{
+#if defined(BCM_POWER_ALWAYS_ON)
+	BCM_POWER_HANDLE_T always_on_handle;
+#endif
+	int rc = 0;
+	int i;
+
+	printk(KERN_INFO "bcm_power: Broadcom power driver\n");
+	bcm_mailbox_write(MBOX_CHAN_POWER, 0);
+
+	for (i = 0; i < BCM_POWER_MAXCLIENTS; i++)
+		g_state.client_request[i] = BCM_POWER_NOCLIENT;
+
+	sema_init(&g_state.client_mutex, 1);
+	sema_init(&g_state.mutex, 1);
+
+	g_state.global_request = 0;
+
+#if defined(BCM_POWER_ALWAYS_ON)
+	if (BCM_POWER_ALWAYS_ON) {
+		bcm_power_open(&always_on_handle);
+		bcm_power_request(always_on_handle, BCM_POWER_ALWAYS_ON);
+	}
+#endif
+
+	return rc;
+}
+
+static void __exit bcm_power_exit(void)
+{
+	bcm_mailbox_write(MBOX_CHAN_POWER, 0);
+}
+
+arch_initcall(bcm_power_init);	/* Initialize early */
+module_exit(bcm_power_exit);
+
+MODULE_AUTHOR("Phil Elwell");
+MODULE_DESCRIPTION("Interface to BCM2708 power management");
+MODULE_LICENSE("GPL");

arch/arm/mach-bcm2708/vc_mem.c

@@ -0,0 +1,466 @@
+/*****************************************************************************
+* Copyright 2010 - 2011 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_ARCH_KONA
+#include <chal/chal_ipc.h>
+#elif CONFIG_ARCH_BCM2708
+#else
+#include <csp/chal_ipc.h>
+#endif
+
+#include "mach/vc_mem.h"
+//#include "interface/vchiq_arm/vchiq_connected.h"
+
+#define DRIVER_NAME  "vc-mem"
+
+// Uncomment to enable debug logging
+//#define ENABLE_DBG
+
+#if defined(ENABLE_DBG)
+#define LOG_DBG( fmt, ... )  printk( KERN_INFO fmt "\n", ##__VA_ARGS__ )
+#else
+#define LOG_DBG( fmt, ... )
+#endif
+#define LOG_ERR( fmt, ... )  printk( KERN_ERR fmt "\n", ##__VA_ARGS__ )
+
+// Device (/dev) related variables
+static dev_t vc_mem_devnum = 0;
+static struct class *vc_mem_class = NULL;
+static struct cdev vc_mem_cdev;
+static int vc_mem_inited = 0;
+
+// Proc entry
+static struct proc_dir_entry *vc_mem_proc_entry;
+
+/*
+ * Videocore memory addresses and size
+ *
+ * Drivers that wish to know the videocore memory addresses and sizes should
+ * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in
+ * headers. This allows the other drivers to not be tied down to a a certain
+ * address/size at compile time.
+ *
+ * In the future, the goal is to have the videocore memory virtual address and
+ * size be calculated at boot time rather than at compile time. The decision of
+ * where the videocore memory resides and its size would be in the hands of the
+ * bootloader (and/or kernel). When that happens, the values of these variables
+ * would be calculated and assigned in the init function.
+ */
+#ifdef CONFIG_ARCH_KONA
+
+#include <mach/io_map.h>
+unsigned long mm_vc_mem_phys_addr = VC_EMI;
+
+#elif CONFIG_ARCH_BCM2708
+
+// in the 2835 VC in mapped above ARM, but ARM has full access to VC space
+unsigned long mm_vc_mem_phys_addr = 0x00000000;
+
+#else
+
+#include <mach/csp/mm_io.h>
+unsigned long mm_vc_mem_phys_addr = MM_ADDR_IO_VC_EMI;
+
+#endif
+
+unsigned int mm_vc_mem_size = 0;
+unsigned int mm_vc_mem_base = 0;
+
+EXPORT_SYMBOL(mm_vc_mem_phys_addr);
+EXPORT_SYMBOL(mm_vc_mem_size);
+EXPORT_SYMBOL(mm_vc_mem_base);
+
+/****************************************************************************
+*
+*   vc_mem_open
+*
+***************************************************************************/
+
+static int
+vc_mem_open(struct inode *inode, struct file *file)
+{
+	(void) inode;
+	(void) file;
+
+	LOG_DBG("%s: called file = 0x%p", __func__, file);
+
+	return 0;
+}
+
+/****************************************************************************
+*
+*   vc_mem_release
+*
+***************************************************************************/
+
+static int
+vc_mem_release(struct inode *inode, struct file *file)
+{
+	(void) inode;
+	(void) file;
+
+	LOG_DBG("%s: called file = 0x%p", __func__, file);
+
+	return 0;
+}
+
+/****************************************************************************
+*
+*   vc_mem_get_size
+*
+***************************************************************************/
+
+static void
+vc_mem_get_size(void)
+{
+	mm_vc_mem_size = 256 * 1024 * 1024;	// Static for now
+}
+
+/****************************************************************************
+*
+*   vc_mem_get_base
+*
+***************************************************************************/
+
+static void
+vc_mem_get_base(void)
+{
+	mm_vc_mem_base = 128 * 1024 * 1024;	// Static for now
+}
+
+/****************************************************************************
+*
+*   vc_mem_get_current_size
+*
+***************************************************************************/
+
+int
+vc_mem_get_current_size(void)
+{
+	vc_mem_get_size();
+	return mm_vc_mem_size;
+}
+
+EXPORT_SYMBOL_GPL(vc_mem_get_current_size);
+
+/****************************************************************************
+*
+*   vc_mem_ioctl
+*
+***************************************************************************/
+
+static long
+vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int rc = 0;
+
+	(void) cmd;
+	(void) arg;
+
+	LOG_DBG("%s: called file = 0x%p", __func__, file);
+
+	switch (cmd) {
+	case VC_MEM_IOC_MEM_PHYS_ADDR:
+		{
+			LOG_DBG("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p",
+				__func__, (void *) mm_vc_mem_phys_addr);
+
+			if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr,
+					 sizeof (mm_vc_mem_phys_addr)) != 0) {
+				rc = -EFAULT;
+			}
+			break;
+		}
+	case VC_MEM_IOC_MEM_SIZE:
+		{
+			// Get the videocore memory size first
+			vc_mem_get_size();
+
+			LOG_DBG("%s: VC_MEM_IOC_MEM_SIZE=%u", __func__,
+				mm_vc_mem_size);
+
+			if (copy_to_user((void *) arg, &mm_vc_mem_size,
+					 sizeof (mm_vc_mem_size)) != 0) {
+				rc = -EFAULT;
+			}
+			break;
+		}
+	case VC_MEM_IOC_MEM_BASE:
+		{
+			// Get the videocore memory base
+			vc_mem_get_base();
+
+			LOG_DBG("%s: VC_MEM_IOC_MEM_BASE=%u", __func__,
+				mm_vc_mem_base);
+
+			if (copy_to_user((void *) arg, &mm_vc_mem_base,
+					 sizeof (mm_vc_mem_base)) != 0) {
+				rc = -EFAULT;
+			}
+			break;
+		}
+	default:
+		{
+			return -ENOTTY;
+		}
+	}
+	LOG_DBG("%s: file = 0x%p returning %d", __func__, file, rc);
+
+	return rc;
+}
+
+/****************************************************************************
+*
+*   vc_mem_mmap
+*
+***************************************************************************/
+
+static int
+vc_mem_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	int rc = 0;
+	unsigned long length = vma->vm_end - vma->vm_start;
+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+
+	LOG_DBG("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx",
+		__func__, (long) vma->vm_start, (long) vma->vm_end,
+		(long) vma->vm_pgoff);
+
+	if (offset + length > mm_vc_mem_size) {
+		LOG_ERR("%s: length %ld is too big", __func__, length);
+		return -EINVAL;
+	}
+	// Do not cache the memory map
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	rc = remap_pfn_range(vma, vma->vm_start,
+			     (mm_vc_mem_phys_addr >> PAGE_SHIFT) +
+			     vma->vm_pgoff, length, vma->vm_page_prot);
+	if (rc != 0) {
+		LOG_ERR("%s: remap_pfn_range failed (rc=%d)", __func__, rc);
+	}
+
+	return rc;
+}
+
+/****************************************************************************
+*
+*   File Operations for the driver.
+*
+***************************************************************************/
+
+static const struct file_operations vc_mem_fops = {
+	.owner = THIS_MODULE,
+	.open = vc_mem_open,
+	.release = vc_mem_release,
+	.unlocked_ioctl = vc_mem_ioctl,
+	.mmap = vc_mem_mmap,
+};
+
+/****************************************************************************
+*
+*   vc_mem_proc_read
+*
+***************************************************************************/
+
+static int
+vc_mem_proc_read(char *buf, char **start, off_t offset, int count, int *eof,
+		 void *data)
+{
+	char *p = buf;
+
+	(void) start;
+	(void) count;
+	(void) data;
+
+	if (offset > 0) {
+		*eof = 1;
+		return 0;
+	}
+	// Get the videocore memory size first
+	vc_mem_get_size();
+
+	p += sprintf(p, "Videocore memory:\n");
+	if (mm_vc_mem_phys_addr != 0)
+		p += sprintf(p, "   Physical address: 0x%p\n",
+			     (void *) mm_vc_mem_phys_addr);
+	else
+		p += sprintf(p, "   Physical address: 0x00000000\n");
+	p += sprintf(p, "   Length (bytes):   %u\n", mm_vc_mem_size);
+
+	*eof = 1;
+	return p - buf;
+}
+
+/****************************************************************************
+*
+*   vc_mem_proc_write
+*
+***************************************************************************/
+
+static int
+vc_mem_proc_write(struct file *file, const char __user * buffer,
+		  unsigned long count, void *data)
+{
+	int rc = -EFAULT;
+	char input_str[10];
+
+	memset(input_str, 0, sizeof (input_str));
+
+	if (count > sizeof (input_str)) {
+		LOG_ERR("%s: input string length too long", __func__);
+		goto out;
+	}
+
+	if (copy_from_user(input_str, buffer, count - 1)) {
+		LOG_ERR("%s: failed to get input string", __func__);
+		goto out;
+	}
+
+	if (strncmp(input_str, "connect", strlen("connect")) == 0) {
+		// Get the videocore memory size from the videocore
+		vc_mem_get_size();
+	}
+
+      out:
+	return rc;
+}
+
+/****************************************************************************
+*
+*   vc_mem_connected_init
+*
+*   This function is called once the videocore has been connected.
+*
+***************************************************************************/
+
+void
+vc_mem_connected_init(void)
+{
+	int rc = -EFAULT;
+	struct device *dev;
+
+	LOG_DBG("%s: called", __func__);
+
+	vc_mem_get_size();
+
+	printk("vc-mem: mm_vc_mem_phys_addr = 0x%08lx\n", mm_vc_mem_phys_addr);
+	printk("vc-mem: mm_vc_mem_size      = 0x%08x (%u MiB)\n",
+	       mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024));
+
+	if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) {
+		LOG_ERR("%s: alloc_chrdev_region failed (rc=%d)", __func__, rc);
+		goto out_err;
+	}
+
+	cdev_init(&vc_mem_cdev, &vc_mem_fops);
+	if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) {
+		LOG_ERR("%s: cdev_add failed (rc=%d)", __func__, rc);
+		goto out_unregister;
+	}
+
+	vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME);
+	if (IS_ERR(vc_mem_class)) {
+		rc = PTR_ERR(vc_mem_class);
+		LOG_ERR("%s: class_create failed (rc=%d)", __func__, rc);
+		goto out_cdev_del;
+	}
+
+	dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL,
+			    DRIVER_NAME);
+	if (IS_ERR(dev)) {
+		rc = PTR_ERR(dev);
+		LOG_ERR("%s: device_create failed (rc=%d)", __func__, rc);
+		goto out_class_destroy;
+	}
+
+	vc_mem_proc_entry = create_proc_entry(DRIVER_NAME, 0444, NULL);
+	if (vc_mem_proc_entry == NULL) {
+		rc = -EFAULT;
+		LOG_ERR("%s: create_proc_entry failed", __func__);
+		goto out_device_destroy;
+	}
+	vc_mem_proc_entry->read_proc = vc_mem_proc_read;
+	vc_mem_proc_entry->write_proc = vc_mem_proc_write;
+
+	vc_mem_inited = 1;
+	return;
+
+      out_device_destroy:
+	device_destroy(vc_mem_class, vc_mem_devnum);
+
+      out_class_destroy:
+	class_destroy(vc_mem_class);
+	vc_mem_class = NULL;
+
+      out_cdev_del:
+	cdev_del(&vc_mem_cdev);
+
+      out_unregister:
+	unregister_chrdev_region(vc_mem_devnum, 1);
+
+      out_err:
+	return;
+}
+
+/****************************************************************************
+*
+*   vc_mem_init
+*
+***************************************************************************/
+
+static int __init
+vc_mem_init(void)
+{
+	printk(KERN_INFO "vc-mem: Videocore memory driver\n");
+
+	//vchiq_add_connected_callback(vc_mem_connected_init);
+
+	return 0;
+}
+
+/****************************************************************************
+*
+*   vc_mem_exit
+*
+***************************************************************************/
+
+static void __exit
+vc_mem_exit(void)
+{
+	LOG_DBG("%s: called", __func__);
+
+	if (vc_mem_inited) {
+		remove_proc_entry(vc_mem_proc_entry->name, NULL);
+		device_destroy(vc_mem_class, vc_mem_devnum);
+		class_destroy(vc_mem_class);
+		cdev_del(&vc_mem_cdev);
+		unregister_chrdev_region(vc_mem_devnum, 1);
+	}
+}
+
+module_init(vc_mem_init);
+module_exit(vc_mem_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Broadcom Corporation");

arch/arm/mach-bcm2708/vcio.c

@@ -0,0 +1,304 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/vcio.c
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This device provides a shared mechanism for writing to the mailboxes,
+ * semaphores, doorbells etc. that are shared between the ARM and the
+ * VideoCore processor
+ */
+
+#if defined(CONFIG_SERIAL_BCM_MBOX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <linux/io.h>
+
+#include <mach/vcio.h>
+#include <mach/platform.h>
+
+#define DRIVER_NAME BCM_VCIO_DRIVER_NAME
+
+/* ----------------------------------------------------------------------
+ *	Mailbox
+ * -------------------------------------------------------------------- */
+
+/* offsets from a mail box base address */
+#define MAIL_WRT	0x00	/* write - and next 4 words */
+#define MAIL_RD		0x00	/* read - and next 4 words */
+#define MAIL_POL	0x10	/* read without popping the fifo */
+#define MAIL_SND	0x14	/* sender ID (bottom two bits) */
+#define MAIL_STA	0x18	/* status */
+#define MAIL_CNF	0x1C	/* configuration */
+
+#define MBOX_MSG(chan, data28)		(((data28) & ~0xf) | ((chan) & 0xf))
+#define MBOX_MSG_LSB(chan, data28) (((data28) << 4) | ((chan) & 0xf))
+#define MBOX_CHAN(msg)			((msg) & 0xf)
+#define MBOX_DATA28(msg)		((msg) & ~0xf)
+#define MBOX_DATA28_LSB(msg)		(((uint32_t)msg) >> 4)
+
+#define MBOX_MAGIC 0xd0d0c0de
+
+struct vc_mailbox {
+	struct device *dev;	/* parent device */
+	void __iomem *status;
+	void __iomem *config;
+	void __iomem *read;
+	void __iomem *write;
+	uint32_t msg[MBOX_CHAN_COUNT];
+	struct semaphore sema[MBOX_CHAN_COUNT];
+	uint32_t magic;
+};
+
+static void mbox_init(struct vc_mailbox *mbox_out, struct device *dev,
+		      uint32_t addr_mbox)
+{
+	int i;
+
+	mbox_out->dev = dev;
+	mbox_out->status = __io_address(addr_mbox + MAIL_STA);
+	mbox_out->config = __io_address(addr_mbox + MAIL_CNF);
+	mbox_out->read = __io_address(addr_mbox + MAIL_RD);
+	/* Write to the other mailbox */
+	mbox_out->write =
+	    __io_address((addr_mbox ^ ARM_0_MAIL0_WRT ^ ARM_0_MAIL1_WRT) +
+			 MAIL_WRT);
+
+	for (i = 0; i < MBOX_CHAN_COUNT; i++) {
+		mbox_out->msg[i] = 0;
+		sema_init(&mbox_out->sema[i], 0);
+	}
+
+	/* Enable the interrupt on data reception */
+	writel(ARM_MC_IHAVEDATAIRQEN, mbox_out->config);
+
+	mbox_out->magic = MBOX_MAGIC;
+}
+
+static int mbox_write(struct vc_mailbox *mbox, unsigned chan, uint32_t data28)
+{
+	int rc;
+
+	if (mbox->magic != MBOX_MAGIC)
+		rc = -EINVAL;
+	else {
+		/* wait for the mailbox FIFO to have some space in it */
+		while (0 != (readl(mbox->status) & ARM_MS_FULL))
+			cpu_relax();
+
+		writel(MBOX_MSG(chan, data28), mbox->write);
+		rc = 0;
+	}
+	return rc;
+}
+
+static int mbox_read(struct vc_mailbox *mbox, unsigned chan, uint32_t *data28)
+{
+	int rc;
+
+	if (mbox->magic != MBOX_MAGIC)
+		rc = -EINVAL;
+	else {
+		down(&mbox->sema[chan]);
+		*data28 = MBOX_DATA28(mbox->msg[chan]);
+		mbox->msg[chan] = 0;
+		rc = 0;
+	}
+	return rc;
+}
+
+static irqreturn_t mbox_irq(int irq, void *dev_id)
+{
+	/* wait for the mailbox FIFO to have some data in it */
+	struct vc_mailbox *mbox = (struct vc_mailbox *) dev_id;
+	int status = readl(mbox->status);
+	int ret = IRQ_NONE;
+
+	while (!(status & ARM_MS_EMPTY)) {
+		uint32_t msg = readl(mbox->read);
+		int chan = MBOX_CHAN(msg);
+		if (chan < MBOX_CHAN_COUNT) {
+			if (mbox->msg[chan]) {
+				/* Overflow */
+				printk(KERN_ERR DRIVER_NAME
+				       ": mbox chan %d overflow - drop %08x\n",
+				       chan, msg);
+			} else {
+				mbox->msg[chan] = (msg | 0xf);
+				up(&mbox->sema[chan]);
+			}
+		} else {
+			printk(KERN_ERR DRIVER_NAME
+			       ": invalid channel selector (msg %08x)\n", msg);
+		}
+		ret = IRQ_HANDLED;
+		status = readl(mbox->status);
+	}
+	return ret;
+}
+
+static struct irqaction mbox_irqaction = {
+	.name = "ARM Mailbox IRQ",
+	.flags = IRQF_DISABLED | IRQF_IRQPOLL,
+	.handler = mbox_irq,
+};
+
+/* ----------------------------------------------------------------------
+ *	Mailbox Methods
+ * -------------------------------------------------------------------- */
+
+static struct device *mbox_dev;	/* we assume there's only one! */
+
+static int dev_mbox_write(struct device *dev, unsigned chan, uint32_t data28)
+{
+	int rc;
+
+	struct vc_mailbox *mailbox = dev_get_drvdata(dev);
+	device_lock(dev);
+	rc = mbox_write(mailbox, chan, data28);
+	device_unlock(dev);
+
+	return rc;
+}
+
+static int dev_mbox_read(struct device *dev, unsigned chan, uint32_t *data28)
+{
+	int rc;
+
+	struct vc_mailbox *mailbox = dev_get_drvdata(dev);
+	device_lock(dev);
+	rc = mbox_read(mailbox, chan, data28);
+	device_unlock(dev);
+
+	return rc;
+}
+
+extern int bcm_mailbox_write(unsigned chan, uint32_t data28)
+{
+	if (mbox_dev)
+		return dev_mbox_write(mbox_dev, chan, data28);
+	else
+		return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(bcm_mailbox_write);
+
+extern int bcm_mailbox_read(unsigned chan, uint32_t *data28)
+{
+	if (mbox_dev)
+		return dev_mbox_read(mbox_dev, chan, data28);
+	else
+		return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(bcm_mailbox_read);
+
+static void dev_mbox_register(const char *dev_name, struct device *dev)
+{
+	mbox_dev = dev;
+}
+
+/* ----------------------------------------------------------------------
+ *	Platform Device for Mailbox
+ * -------------------------------------------------------------------- */
+
+static int bcm_vcio_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct vc_mailbox *mailbox;
+
+	mailbox = kzalloc(sizeof(*mailbox), GFP_KERNEL);
+	if (NULL == mailbox) {
+		printk(KERN_ERR DRIVER_NAME ": failed to allocate "
+		       "mailbox memory\n");
+		ret = -ENOMEM;
+	} else {
+		struct resource *res;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (res == NULL) {
+			printk(KERN_ERR DRIVER_NAME ": failed to obtain memory "
+			       "resource\n");
+			ret = -ENODEV;
+			kfree(mailbox);
+		} else {
+			/* should be based on the registers from res really */
+			mbox_init(mailbox, &pdev->dev, ARM_0_MAIL0_RD);
+
+			platform_set_drvdata(pdev, mailbox);
+			dev_mbox_register(DRIVER_NAME, &pdev->dev);
+
+			mbox_irqaction.dev_id = mailbox;
+			setup_irq(IRQ_ARM_MAILBOX, &mbox_irqaction);
+			printk(KERN_INFO DRIVER_NAME ": mailbox at %p\n",
+			       __io_address(ARM_0_MAIL0_RD));
+		}
+	}
+	return ret;
+}
+
+static int bcm_vcio_remove(struct platform_device *pdev)
+{
+	struct vc_mailbox *mailbox = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(mailbox);
+
+	return 0;
+}
+
+static struct platform_driver bcm_mbox_driver = {
+	.probe = bcm_vcio_probe,
+	.remove = bcm_vcio_remove,
+
+	.driver = {
+		   .name = DRIVER_NAME,
+		   .owner = THIS_MODULE,
+		   },
+};
+
+static int __init bcm_mbox_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "mailbox: Broadcom VideoCore Mailbox driver\n");
+
+	ret = platform_driver_register(&bcm_mbox_driver);
+	if (ret != 0) {
+		printk(KERN_ERR DRIVER_NAME ": failed to register "
+		       "on platform\n");
+	} 
+
+	return ret;
+}
+
+static void __exit bcm_mbox_exit(void)
+{
+	platform_driver_unregister(&bcm_mbox_driver);
+}
+
+arch_initcall(bcm_mbox_init);	/* Initialize early */
+module_exit(bcm_mbox_exit);
+
+MODULE_AUTHOR("Gray Girling");
+MODULE_DESCRIPTION("ARM I/O to VideoCore processor");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bcm-mbox");

arch/arm/mach-davinci/board-da850-evm.c

@@ -748,7 +748,7 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
 	.tdm_slots	= 2,
 	.serial_dir	= da850_iis_serializer_direction,
-	.asp_chan_q	= EVENTQ_1,
+	.asp_chan_q	= EVENTQ_0,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -563,7 +563,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 	int val;
 	u32 value;
 
-	if (!vpif_vsclkdis_reg || !cpld_client)
+	if (!vpif_vidclkctl_reg || !cpld_client)
 		return -ENXIO;
 
 	val = i2c_smbus_read_byte(cpld_client);
@@ -571,7 +571,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 		return val;
 
 	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(vpif_vsclkdis_reg);
+	value = __raw_readl(vpif_vidclkctl_reg);
 	if (mux_mode) {
 		val &= VPIF_INPUT_TWO_CHANNEL;
 		value |= VIDCH1CLK;
@@ -579,7 +579,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 		val |= VPIF_INPUT_ONE_CHANNEL;
 		value &= ~VIDCH1CLK;
 	}
-	__raw_writel(value, vpif_vsclkdis_reg);
+	__raw_writel(value, vpif_vidclkctl_reg);
 	spin_unlock_irqrestore(&vpif_reg_lock, flags);
 
 	err = i2c_smbus_write_byte(cpld_client, val);

arch/arm/mach-exynos4/platsmp.c

@@ -193,12 +193,10 @@ void __init smp_init_cpus(void)
 	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
 	/* sanity check */
-	if (ncores > NR_CPUS) {
-		printk(KERN_WARNING
-		       "EXYNOS4: no. of cores (%d) greater than configured "
-		       "maximum of %d - clipping\n",
-		       ncores, NR_CPUS);
-		ncores = NR_CPUS;
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
 	}
 
 	for (i = 0; i < ncores; i++)

arch/arm/mach-msm/platsmp.c

@@ -156,6 +156,12 @@ void __init smp_init_cpus(void)
 {
 	unsigned int i, ncores = get_core_count();
 
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
 

arch/arm/mach-mxs/clock-mx28.c

@@ -404,7 +404,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
 	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg | (1 << clk->enable_shift)) {				\
+	if (reg & (1 << clk->enable_shift)) {				\
 		pr_err("%s: clock is gated\n", __func__);		\
 		return -EINVAL;						\
 	}								\

arch/arm/mach-mxs/include/mach/mxs.h

@@ -30,6 +30,7 @@
  */
 #define cpu_is_mx23()		(					\
 		machine_is_mx23evk() ||					\
+		machine_is_stmp378x() ||				\
 		0)
 #define cpu_is_mx28()		(					\
 		machine_is_mx28evk() ||					\

arch/arm/mach-omap2/Kconfig

@@ -329,6 +329,7 @@ config MACH_OMAP4_PANDA
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
 	depends on ARCH_OMAP3
+	select ARM_AMBA
 	select OC_ETM
 	help
 	  Say Y here to enable debugging hardware of omap3

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -193,7 +193,7 @@ static struct platform_device rx51_charger_device = {
 static void __init rx51_charger_init(void)
 {
 	WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
-		GPIOF_OUT_INIT_LOW, "isp1704_reset"));
+		GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
 
 	platform_device_register(&rx51_charger_device);
 }

arch/arm/mach-omap2/omap-smp.c

@@ -109,12 +109,10 @@ void __init smp_init_cpus(void)
 	ncores = scu_get_core_count(scu_base);
 
 	/* sanity check */
-	if (ncores > NR_CPUS) {
-		printk(KERN_WARNING
-		       "OMAP4: no. of cores (%d) greater than configured "
-		       "maximum of %d - clipping\n",
-		       ncores, NR_CPUS);
-		ncores = NR_CPUS;
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
 	}
 
 	for (i = 0; i < ncores; i++)

arch/arm/mach-omap2/omap_hwmod.c

@@ -749,7 +749,7 @@ static int _count_mpu_irqs(struct omap_hwmod *oh)
 		ohii = &oh->mpu_irqs[i++];
 	} while (ohii->irq != -1);
 
-	return i;
+	return i-1;
 }
 
 /**
@@ -772,7 +772,7 @@ static int _count_sdma_reqs(struct omap_hwmod *oh)
 		ohdi = &oh->sdma_reqs[i++];
 	} while (ohdi->dma_req != -1);
 
-	return i;
+	return i-1;
 }
 
 /**
@@ -795,7 +795,7 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
 		mem = &os->addr[i++];
 	} while (mem->pa_start != mem->pa_end);
 
-	return i;
+	return i-1;
 }
 
 /**

arch/arm/mach-omap2/pm.c

@@ -23,6 +23,7 @@
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include "pm.h"
+#include "twl-common.h"
 
 static struct omap_device_pm_latency *pm_lats;
 
@@ -251,11 +252,8 @@ postcore_initcall(omap2_common_pm_init);
 
 static int __init omap2_common_pm_late_init(void)
 {
-	/* Init the OMAP TWL parameters */
-	omap3_twl_init();
-	omap4_twl_init();
-
 	/* Init the voltage layer */
+	omap_pmic_late_init();
 	omap_voltage_late_init();
 
 	/* Initialize the voltages */

arch/arm/mach-omap2/smartreflex.c

@@ -137,7 +137,7 @@ static irqreturn_t sr_interrupt(int irq, void *data)
 		sr_write_reg(sr_info, ERRCONFIG_V1, status);
 	} else if (sr_info->ip_type == SR_TYPE_V2) {
 		/* Read the status bits */
-		sr_read_reg(sr_info, IRQSTATUS);
+		status = sr_read_reg(sr_info, IRQSTATUS);
 
 		/* Clear them by writing back */
 		sr_write_reg(sr_info, IRQSTATUS, status);

arch/arm/mach-omap2/twl-common.c

@@ -30,6 +30,7 @@
 #include <plat/usb.h>
 
 #include "twl-common.h"
+#include "pm.h"
 
 static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.addr		= 0x48,
@@ -48,6 +49,16 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
+void __init omap_pmic_late_init(void)
+{
+	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
+	if (!pmic_i2c_board_info.irq)
+		return;
+
+	omap3_twl_init();
+	omap4_twl_init();
+}
+
 #if defined(CONFIG_ARCH_OMAP3)
 static struct twl4030_usb_data omap3_usb_pdata = {
 	.usb_mode	= T2_USB_MODE_ULPI,

arch/arm/mach-omap2/twl-common.h

@@ -1,6 +1,8 @@
 #ifndef __OMAP_PMIC_COMMON__
 #define __OMAP_PMIC_COMMON__
 
+#include <plat/irqs.h>
+
 #define TWL_COMMON_PDATA_USB		(1 << 0)
 #define TWL_COMMON_PDATA_BCI		(1 << 1)
 #define TWL_COMMON_PDATA_MADC		(1 << 2)
@@ -30,6 +32,7 @@ struct twl4030_platform_data;
 
 void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
 		    struct twl4030_platform_data *pmic_data);
+void omap_pmic_late_init(void);
 
 static inline void omap2_pmic_init(const char *pmic_type,
 				   struct twl4030_platform_data *pmic_data)

arch/arm/mach-pxa/balloon3.c

@@ -307,7 +307,7 @@ static inline void balloon3_mmc_init(void) {}
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static void balloon3_udc_command(int cmd)
 {
 	if (cmd == PXA2XX_UDC_CMD_CONNECT)

arch/arm/mach-pxa/cm-x300.c

@@ -775,7 +775,6 @@ static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
 
 static void __init cm_x300_init_wi2wi(void)
 {
-	int bt_reset, wlan_en;
 	int err;
 
 	if (system_rev < 130) {
@@ -791,12 +790,11 @@ static void __init cm_x300_init_wi2wi(void)
 	}
 
 	udelay(10);
-	gpio_set_value(bt_reset, 0);
+	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
 	udelay(10);
-	gpio_set_value(bt_reset, 1);
+	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
 
-	gpio_free(wlan_en);
-	gpio_free(bt_reset);
+	gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
 }
 
 /* MFP */

arch/arm/mach-pxa/colibri-pxa320.c

@@ -146,7 +146,7 @@ static void __init colibri_pxa320_init_eth(void)
 static inline void __init colibri_pxa320_init_eth(void) {}
 #endif /* CONFIG_AX88796 */
 
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
 	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
 	.gpio_pullup		= -1,

arch/arm/mach-pxa/gumstix.c

@@ -106,7 +106,7 @@ static void __init gumstix_mmc_init(void)
 }
 #endif
 
-#ifdef CONFIG_USB_GADGET_PXA25X
+#ifdef CONFIG_USB_PXA25X
 static struct gpio_vbus_mach_info gumstix_udc_info = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,

arch/arm/mach-pxa/include/mach/palm27x.h

@@ -37,8 +37,8 @@ extern void __init palm27x_lcd_init(int power,
 static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {}
 #endif
 
-#if	defined(CONFIG_USB_GADGET_PXA27X) || \
-	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if	defined(CONFIG_USB_PXA27X) || \
+	defined(CONFIG_USB_PXA27X_MODULE)
 extern void __init palm27x_udc_init(int vbus, int pullup,
 					int vbus_inverted);
 #else

arch/arm/mach-pxa/palm27x.c

@@ -164,8 +164,8 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if	defined(CONFIG_USB_GADGET_PXA27X) || \
-	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if	defined(CONFIG_USB_PXA27X) || \
+	defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info palm27x_udc_info = {
 	.gpio_vbus_inverted	= 1,
 };

arch/arm/mach-pxa/palmtc.c

@@ -338,7 +338,7 @@ static inline void palmtc_mkp_init(void) {}
 /******************************************************************************
  * UDC
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
+#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
 static struct gpio_vbus_mach_info palmtc_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,

arch/arm/mach-pxa/vpac270.c

@@ -343,7 +343,7 @@ static inline void vpac270_uhc_init(void) {}
 /******************************************************************************
  * USB Gadget
  ******************************************************************************/
-#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
 static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
 	.gpio_vbus		= GPIO41_VPAC270_UDC_DETECT,
 	.gpio_pullup		= -1,

arch/arm/mach-realview/platsmp.c

@@ -52,12 +52,10 @@ void __init smp_init_cpus(void)
 	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
 	/* sanity check */
-	if (ncores > NR_CPUS) {
-		printk(KERN_WARNING
-		       "Realview: no. of cores (%d) greater than configured "
-		       "maximum of %d - clipping\n",
-		       ncores, NR_CPUS);
-		ncores = NR_CPUS;
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
 	}
 
 	for (i = 0; i < ncores; i++)

arch/arm/mach-shmobile/platsmp.c

@@ -56,6 +56,12 @@ void __init smp_init_cpus(void)
 	unsigned int ncores = shmobile_smp_get_core_count();
 	unsigned int i;
 
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
 

arch/arm/mach-tegra/platsmp.c

@@ -114,10 +114,10 @@ void __init smp_init_cpus(void)
 {
 	unsigned int i, ncores = scu_get_core_count(scu_base);
 
-	if (ncores > NR_CPUS) {
-		printk(KERN_ERR "Tegra: no. of cores (%u) greater than configured (%u), clipping\n",
-			ncores, NR_CPUS);
-		ncores = NR_CPUS;
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
 	}
 
 	for (i = 0; i < ncores; i++)

arch/arm/mach-ux500/cpu.c

@@ -99,7 +99,27 @@ static void ux500_l2x0_inv_all(void)
 	ux500_cache_sync();
 }
 
-static int ux500_l2x0_init(void)
+static int __init ux500_l2x0_unlock(void)
+{
+	int i;
+
+	/*
+	 * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
+	 * apparently locks both caches before jumping to the kernel. The
+	 * l2x0 core will not touch the unlock registers if the l2x0 is
+	 * already enabled, so we do it right here instead. The PL310 has
+	 * 8 sets of registers, one per possible CPU.
+	 */
+	for (i = 0; i < 8; i++) {
+		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+			       i * L2X0_LOCKDOWN_STRIDE);
+		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+			       i * L2X0_LOCKDOWN_STRIDE);
+	}
+	return 0;
+}
+
+static int __init ux500_l2x0_init(void)
 {
 	if (cpu_is_u5500())
 		l2x0_base = __io_address(U5500_L2CC_BASE);
@@ -108,6 +128,9 @@ static int ux500_l2x0_init(void)
 	else
 		ux500_unknown_soc();
 
+	/* Unlock before init */
+	ux500_l2x0_unlock();
+
 	/* 64KB way size, 8 way associativity, force WA */
 	l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
 

arch/arm/mach-ux500/platsmp.c

@@ -156,12 +156,10 @@ void __init smp_init_cpus(void)
 	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
 	/* sanity check */
-	if (ncores > NR_CPUS) {
-		printk(KERN_WARNING
-		       "U8500: no. of cores (%d) greater than configured "
-		       "maximum of %d - clipping\n",
-		       ncores, NR_CPUS);
-		ncores = NR_CPUS;
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
 	}
 
 	for (i = 0; i < ncores; i++)

arch/arm/mach-vexpress/ct-ca9x4.c

@@ -221,6 +221,12 @@ static void ct_ca9x4_init_cpu_map(void)
 {
 	int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU));
 
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
 	for (i = 0; i < ncores; ++i)
 		set_cpu_possible(i, true);
 

arch/arm/mm/Kconfig

@@ -390,7 +390,7 @@ config CPU_PJ4
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || MACH_BCM2708
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_V6

arch/arm/mm/alignment.c

@@ -855,9 +855,11 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	case 0x08000000:	/* ldm or stm, or thumb-2 32bit instruction */
 		if (thumb2_32b)
 			handler = do_alignment_t32_to_handler(&instr, regs, &offset);
-		else
+		else {
+                        offset.un = 0; /* to keep compiler happy */
 			handler = do_alignment_ldmstm;
-		break;
+		}
+                break;
 
 	default:
 		goto bad;

arch/arm/mm/proc-v6.S

@@ -70,10 +70,19 @@ ENTRY(cpu_v6_reset)
  *
  *	IRQs are already disabled.
  */
+
+/* See jira SW-5991 for details of this workaround */
 ENTRY(cpu_v6_do_idle)
-	mov	r1, #0
-	mcr	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
-	mcr	p15, 0, r1, c7, c0, 4		@ wait for interrupt
+	.align 5
+	mov     r1, #2
+1:	subs	r1, #1
+	nop
+	mcreq	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
+	mcreq	p15, 0, r1, c7, c0, 4		@ wait for interrupt
+	nop
+	nop
+	nop
+	bne 1b
 	mov	pc, lr
 
 ENTRY(cpu_v6_dcache_clean_area)

arch/arm/oprofile/common.c

@@ -116,7 +116,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	return oprofile_perf_init(ops);
 }
 
-void __exit oprofile_arch_exit(void)
+void oprofile_arch_exit(void)
 {
 	oprofile_perf_exit();
 }

arch/arm/plat-mxc/include/mach/iomux-v3.h

@@ -89,11 +89,11 @@ typedef u64 iomux_v3_cfg_t;
 #define PAD_CTL_HYS			(1 << 8)
 
 #define PAD_CTL_PKE			(1 << 7)
-#define PAD_CTL_PUE			(1 << 6)
-#define PAD_CTL_PUS_100K_DOWN		(0 << 4)
-#define PAD_CTL_PUS_47K_UP		(1 << 4)
-#define PAD_CTL_PUS_100K_UP		(2 << 4)
-#define PAD_CTL_PUS_22K_UP		(3 << 4)
+#define PAD_CTL_PUE			(1 << 6 | PAD_CTL_PKE)
+#define PAD_CTL_PUS_100K_DOWN		(0 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_47K_UP		(1 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP		(2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP		(3 << 4 | PAD_CTL_PUE)
 
 #define PAD_CTL_ODE			(1 << 3)
 

arch/arm/plat-mxc/pwm.c

@@ -32,6 +32,9 @@
 #define MX3_PWMSAR                0x0C    /* PWM Sample Register */
 #define MX3_PWMPR                 0x10    /* PWM Period Register */
 #define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN                (1 << 24)
+#define MX3_PWMCR_WAITEN                (1 << 23)
+#define MX3_PWMCR_DBGEN			(1 << 22)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
 #define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
 #define MX3_PWMCR_EN              (1 << 0)
@@ -74,10 +77,21 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 		do_div(c, period_ns);
 		duty_cycles = c;
 
+		/*
+		 * according to imx pwm RM, the real period value should be
+		 * PERIOD value in PWMPR plus 2.
+		 */
+		if (period_cycles > 2)
+			period_cycles -= 2;
+		else
+			period_cycles = 0;
+
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
 
-		cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+		cr = MX3_PWMCR_PRESCALER(prescale) |
+			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+			MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
 
 		if (cpu_is_mx25())
 			cr |= MX3_PWMCR_CLKSRC_IPG;

arch/powerpc/include/asm/sections.h

@@ -8,7 +8,7 @@
 
 #ifdef __powerpc64__
 
-extern char _end[];
+extern char __end_interrupts[];
 
 static inline int in_kernel_text(unsigned long addr)
 {

arch/powerpc/include/asm/sparsemem.h

@@ -16,7 +16,7 @@
 #endif /* CONFIG_SPARSEMEM */
 
 #ifdef CONFIG_MEMORY_HOTPLUG
-extern void create_section_mapping(unsigned long start, unsigned long end);
+extern int create_section_mapping(unsigned long start, unsigned long end);
 extern int remove_section_mapping(unsigned long start, unsigned long end);
 #ifdef CONFIG_NUMA
 extern int hot_add_scn_to_nid(unsigned long scn_addr);