dwc_otg: fix summarize urb->actual_length for isochronous transfers

Kernel does not copy input data of ISO transfers to userspace
if actual_length is set only in ISO transfers and not summarized
in urb->actual_length. Fixes raspberrypi/linux#903

Documentation/devicetree/bindings/clock/imx31-clock.txt

@@ -77,7 +77,7 @@ Examples:
 clks: ccm@53f80000{
 	compatible = "fsl,imx31-ccm";
 	reg = <0x53f80000 0x4000>;
-	interrupts = <0 31 0x04 0 53 0x04>;
+	interrupts = <31>, <53>;
 	#clock-cells = <1>;
 };
 

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt

@@ -12,6 +12,11 @@ Required properties:
 - vref-supply: The regulator supply ADC reference voltage.
 - #io-channel-cells: Should be 1, see ../iio-bindings.txt
 
+Optional properties:
+- resets: Must contain an entry for each entry in reset-names if need support
+	  this option. See ../reset/reset.txt for details.
+- reset-names: Must include the name "saradc-apb".
+
 Example:
 	saradc: saradc@2006c000 {
 		compatible = "rockchip,saradc";
@@ -19,6 +24,8 @@ Example:
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		#io-channel-cells = <1>;
 		vref-supply = <&vcc18>;
 	};

Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt

@@ -81,9 +81,9 @@ pm8916:
 	l14, l15, l16, l17, l18
 
 pm8941:
-	s1, s2, s3, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14,
-	l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
-	mvs1, mvs2
+	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
+	5vs1, 5vs2
 
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt - with additional custom properties described below:

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -33,6 +33,7 @@ auo	AU Optronics Corporation
 avago	Avago Technologies
 avic	Shanghai AVIC Optoelectronics Co., Ltd.
 axis	Axis Communications AB
+blokaslabs	Vilniaus Blokas UAB
 bosch	Bosch Sensortec GmbH
 boundary	Boundary Devices Inc.
 brcm	Broadcom Corporation

Documentation/kernel-parameters.txt

@@ -1371,7 +1371,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
 			     controllers
 	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
-	i8042.reset	[HW] Reset the controller during init and cleanup
+	i8042.reset	[HW] Reset the controller during init, cleanup and
+			     suspend-to-ram transitions, only during s2r
+			     transitions, or never reset
+			Format: { 1 | Y | y | 0 | N | n }
+			1, Y, y: always reset controller
+			0, N, n: don't ever reset controller
+			Default: only on s2r transitions on x86; most other
+			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset  [HW] Reset device connected to KBD port
 

Documentation/mic/mpssd/mpssd.c

@@ -1538,9 +1538,9 @@ set_cmdline(struct mic_info *mic)
 
 	len = snprintf(buffer, PATH_MAX,
 		"clocksource=tsc highres=off nohz=off ");
-	len += snprintf(buffer + len, PATH_MAX,
+	len += snprintf(buffer + len, PATH_MAX - len,
 		"cpufreq_on;corec6_off;pc3_off;pc6_off ");
-	len += snprintf(buffer + len, PATH_MAX,
+	len += snprintf(buffer + len, PATH_MAX - len,
 		"ifcfg=static;address,172.31.%d.1;netmask,255.255.255.0",
 		mic->id + 1);
 

Documentation/pinctrl.txt

@@ -831,7 +831,7 @@ separate memory range only intended for GPIO driving, and the register
 range dealing with pin config and pin multiplexing get placed into a
 different memory range and a separate section of the data sheet.
 
-A flag "strict" in struct pinctrl_desc is available to check and deny
+A flag "strict" in struct pinmux_ops is available to check and deny
 simultaneous access to the same pin from GPIO and pin multiplexing
 consumers on hardware of this type. The pinctrl driver should set this flag
 accordingly.

Documentation/virtual/kvm/api.txt

@@ -1991,6 +1991,7 @@ registers, find a list below:
   PPC   | KVM_REG_PPC_TM_VSCR           | 32
   PPC   | KVM_REG_PPC_TM_DSCR           | 64
   PPC   | KVM_REG_PPC_TM_TAR            | 64
+  PPC   | KVM_REG_PPC_TM_XER            | 64
         |                               |
   MIPS  | KVM_REG_MIPS_R0               | 64
           ...

Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 4
-SUBLEVEL = 21
+SUBLEVEL = 48
 EXTRAVERSION =
 NAME = Blurry Fish Butt
 
@@ -128,6 +128,10 @@ _all:
 # Cancel implicit rules on top Makefile
 $(CURDIR)/Makefile Makefile: ;
 
+ifneq ($(words $(subst :, ,$(CURDIR))), 1)
+  $(error main directory cannot contain spaces nor colons)
+endif
+
 ifneq ($(KBUILD_OUTPUT),)
 # Invoke a second make in the output directory, passing relevant variables
 # check that the output directory actually exists
@@ -391,11 +395,12 @@ KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
 		   -Werror-implicit-function-declaration \
 		   -Wno-format-security \
-		   -std=gnu89
+		   -std=gnu89 $(call cc-option,-fno-PIE)
+
 
 KBUILD_AFLAGS_KERNEL :=
 KBUILD_CFLAGS_KERNEL :=
-KBUILD_AFLAGS   := -D__ASSEMBLY__
+KBUILD_AFLAGS   := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
 KBUILD_AFLAGS_MODULE  := -DMODULE
 KBUILD_CFLAGS_MODULE  := -DMODULE
 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
@@ -495,6 +500,12 @@ ifeq ($(KBUILD_EXTMOD),)
                 endif
         endif
 endif
+# install and module_install need also be processed one by one
+ifneq ($(filter install,$(MAKECMDGOALS)),)
+        ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
+	        mixed-targets := 1
+        endif
+endif
 
 ifeq ($(mixed-targets),1)
 # ===========================================================================
@@ -606,11 +617,17 @@ ARCH_CFLAGS :=
 include arch/$(SRCARCH)/Makefile
 
 KBUILD_CFLAGS	+= $(call cc-option,-fno-delete-null-pointer-checks,)
+KBUILD_CFLAGS	+= $(call cc-disable-warning,maybe-uninitialized,)
+KBUILD_CFLAGS	+= $(call cc-disable-warning,frame-address,)
 
 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,)
+KBUILD_CFLAGS	+= -Os
 else
+ifdef CONFIG_PROFILE_ALL_BRANCHES
 KBUILD_CFLAGS	+= -O2
+else
+KBUILD_CFLAGS   += -O2
+endif
 endif
 
 # Tell gcc to never replace conditional load with a non-conditional one
@@ -1260,7 +1277,7 @@ help:
 	@echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
 	@echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
 	@echo  '  dir/            - Build all files in dir and below'
-	@echo  '  dir/file.[oisS] - Build specified target only'
+	@echo  '  dir/file.[ois]  - Build specified target only'
 	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
 	@echo  '                    (requires a recent binutils and recent build (System.map))'
 	@echo  '  dir/file.ko     - Build module including final link'
@@ -1500,11 +1517,11 @@ image_name:
 # Clear a bunch of variables before executing the submake
 tools/: FORCE
 	$(Q)mkdir -p $(objtree)/tools
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(O) subdir=tools -C $(src)/tools/
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(shell cd $(objtree) && /bin/pwd) subdir=tools -C $(src)/tools/
 
 tools/%: FORCE
 	$(Q)mkdir -p $(objtree)/tools
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(O) subdir=tools -C $(src)/tools/ $*
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(shell cd $(objtree) && /bin/pwd) subdir=tools -C $(src)/tools/ $*
 
 # Single targets
 # ---------------------------------------------------------------------------

arch/alpha/include/asm/uaccess.h

@@ -371,14 +371,6 @@ __copy_tofrom_user_nocheck(void *to, const void *from, long len)
 	return __cu_len;
 }
 
-extern inline long
-__copy_tofrom_user(void *to, const void *from, long len, const void __user *validate)
-{
-	if (__access_ok((unsigned long)validate, len, get_fs()))
-		len = __copy_tofrom_user_nocheck(to, from, len);
-	return len;
-}
-
 #define __copy_to_user(to, from, n)					\
 ({									\
 	__chk_user_ptr(to);						\
@@ -393,17 +385,22 @@ __copy_tofrom_user(void *to, const void *from, long len, const void __user *vali
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
-
 extern inline long
 copy_to_user(void __user *to, const void *from, long n)
 {
-	return __copy_tofrom_user((__force void *)to, from, n, to);
+	if (likely(__access_ok((unsigned long)to, n, get_fs())))
+		n = __copy_tofrom_user_nocheck((__force void *)to, from, n);
+	return n;
 }
 
 extern inline long
 copy_from_user(void *to, const void __user *from, long n)
 {
-	return __copy_tofrom_user(to, (__force void *)from, n, from);
+	if (likely(__access_ok((unsigned long)from, n, get_fs())))
+		n = __copy_tofrom_user_nocheck(to, (__force void *)from, n);
+	else
+		memset(to, 0, n);
+	return n;
 }
 
 extern void __do_clear_user(void);

arch/arc/include/asm/cacheflush.h

@@ -85,6 +85,10 @@ void flush_anon_page(struct vm_area_struct *vma,
  */
 #define PG_dc_clean	PG_arch_1
 
+#define CACHE_COLORS_NUM	4
+#define CACHE_COLORS_MSK	(CACHE_COLORS_NUM - 1)
+#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & CACHE_COLORS_MSK)
+
 /*
  * Simple wrapper over config option
  * Bootup code ensures that hardware matches kernel configuration
@@ -94,8 +98,6 @@ static inline int cache_is_vipt_aliasing(void)
 	return IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
 }
 
-#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & 1)
-
 /*
  * checks if two addresses (after page aligning) index into same cache set
  */

arch/arc/include/asm/delay.h

@@ -22,10 +22,13 @@
 static inline void __delay(unsigned long loops)
 {
 	__asm__ __volatile__(
-	"	lp  1f	\n"
-	"	nop	\n"
-	"1:		\n"
-	: "+l"(loops));
+	"	mov lp_count, %0	\n"
+	"	lp  1f			\n"
+	"	nop			\n"
+	"1:				\n"
+	:
+        : "r"(loops)
+        : "lp_count");
 }
 
 extern void __bad_udelay(void);

arch/arc/include/asm/pgtable.h

@@ -277,8 +277,7 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
 
 #define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-#define pfn_pte(pfn, prot)	(__pte(((pte_t)(pfn) << PAGE_SHIFT) | \
-				 pgprot_val(prot)))
+#define pfn_pte(pfn, prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
 #define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 
 /*

arch/arc/include/asm/uaccess.h

@@ -83,7 +83,10 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\
@@ -101,7 +104,11 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
+	"	mov %R1, 0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\

arch/arc/kernel/signal.c

@@ -107,13 +107,13 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
 	struct user_regs_struct uregs;
 
 	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
-	if (!err)
-		set_current_blocked(&set);
-
 	err |= __copy_from_user(&uregs.scratch,
 				&(sf->uc.uc_mcontext.regs.scratch),
 				sizeof(sf->uc.uc_mcontext.regs.scratch));
+	if (err)
+		return err;
 
+	set_current_blocked(&set);
 	regs->bta	= uregs.scratch.bta;
 	regs->lp_start	= uregs.scratch.lp_start;
 	regs->lp_end	= uregs.scratch.lp_end;
@@ -138,7 +138,7 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
 	regs->r0	= uregs.scratch.r0;
 	regs->sp	= uregs.scratch.sp;
 
-	return err;
+	return 0;
 }
 
 static inline int is_do_ss_needed(unsigned int magic)

arch/arc/kernel/time.c

@@ -130,14 +130,17 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 		cycle_t  full;
 	} stamp;
 
-
-	__asm__ __volatile(
-	"1:						\n"
-	"	lr		%0, [AUX_RTC_LOW]	\n"
-	"	lr		%1, [AUX_RTC_HIGH]	\n"
-	"	lr		%2, [AUX_RTC_CTRL]	\n"
-	"	bbit0.nt	%2, 31, 1b		\n"
-	: "=r" (stamp.low), "=r" (stamp.high), "=r" (status));
+	/*
+	 * hardware has an internal state machine which tracks readout of
+	 * low/high and updates the CTRL.status if
+	 *  - interrupt/exception taken between the two reads
+	 *  - high increments after low has been read
+	 */
+	do {
+		stamp.low = read_aux_reg(AUX_RTC_LOW);
+		stamp.high = read_aux_reg(AUX_RTC_HIGH);
+		status = read_aux_reg(AUX_RTC_CTRL);
+	} while (!(status & _BITUL(31)));
 
 	return stamp.full;
 }

arch/arc/kernel/unaligned.c

@@ -241,8 +241,9 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 	if (state.fault)
 		goto fault;
 
+	/* clear any remanants of delay slot */
 	if (delay_mode(regs)) {
-		regs->ret = regs->bta;
+		regs->ret = regs->bta ~1U;
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;

arch/arc/mm/cache.c

@@ -960,11 +960,16 @@ void arc_cache_init(void)
 		/* check for D-Cache aliasing on ARCompact: ARCv2 has PIPT */
 		if (is_isa_arcompact()) {
 			int handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
+			int num_colors = dc->sz_k/dc->assoc/TO_KB(PAGE_SIZE);
 
-			if (dc->alias && !handled)
-				panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
-			else if (!dc->alias && handled)
+			if (dc->alias) {
+				if (!handled)
+					panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
+				if (CACHE_COLORS_NUM != num_colors)
+					panic("CACHE_COLORS_NUM not optimized for config\n");
+			} else if (!dc->alias && handled) {
 				panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
+			}
 		}
 	}
 

arch/arm/boot/compressed/head.S

@@ -776,7 +776,7 @@ __armv7_mmu_cache_on:
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
 		bic     r6, r6, #1 << 31        @ 32-bit translation system
-		bic     r6, r6, #3 << 0         @ use only ttbr0
+		bic     r6, r6, #(7 << 0) | (1 << 4)	@ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control

arch/arm/boot/dts/Makefile

@@ -18,9 +18,6 @@ endif
 ifeq ($(CONFIG_ARCH_BCM2835),y)
    RPI_DT_OVERLAYS=y
 endif
-ifeq ($(RPI_DT_OVERLAYS),y)
-    dts-dirs += overlays
-endif
 
 dtb-$(CONFIG_ARCH_ALPINE) += \
 	alpine-db.dtb
@@ -809,10 +806,11 @@ dtstree		:= $(srctree)/$(src)
 dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
 
 always		:= $(dtb-y)
-subdir-y	:= $(dts-dirs)
+subdir-y	:= overlays
 clean-files	:= *.dtb
 
 # Enable fixups to support overlays on BCM2708 platforms
 ifeq ($(RPI_DT_OVERLAYS),y)
 	DTC_FLAGS ?= -@ -H epapr
+	dts-dirs += overlays
 endif

arch/arm/boot/dts/armada-390.dtsi

@@ -47,6 +47,8 @@
 #include "armada-39x.dtsi"
 
 / {
+	compatible = "marvell,armada390";
+
 	soc {
 		internal-regs {
 			pinctrl@18000 {
@@ -54,4 +56,5 @@
 				reg = <0x18000 0x20>;
 			};
 		};
+	};
 };

arch/arm/boot/dts/bcm2708-rpi-cm.dtsi

@@ -36,6 +36,11 @@
 	status = "okay";
 };
 
+&audio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+};
+
 / {
 	__overrides__ {
 		core_freq = <&clk_core>,"clock-frequency:0";

arch/arm/boot/dts/bcm2708_common.dtsi

@@ -456,7 +456,7 @@
 			reg = <2>;
 			#clock-cells = <0>;
 			clock-output-names = "uart0_pclk";
-			clock-frequency = <3000000>;
+			clock-frequency = <48000000>;
 		};
 
 		clk_apb_p: clock@3 {

arch/arm/boot/dts/bcm2710-rpi-cm3.dts

@@ -7,11 +7,14 @@
 	model = "Raspberry Pi Compute Module 3";
 };
 
-&gpio {
+&uart0 {
+	status = "okay";
+};
 
-	mmc_pins: mmc_pins {
+&gpio {
+	sdhost_pins: sdhost_pins {
 		brcm,pins = <48 49 50 51 52 53>;
-		brcm,function = <7>; /* alt3 */
+		brcm,function = <4>; /* alt0 */
 		brcm,pull = <0 2 2 2 2 2>;
 	};
 
@@ -46,9 +49,9 @@
 	};
 };
 
-&mmc {
+&sdhost {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc_pins>;
+	pinctrl-0 = <&sdhost_pins>;
 	non-removable;
 	bus-width = <4>;
 	status = "okay";

arch/arm/boot/dts/da850-evm.dts

@@ -85,6 +85,7 @@
 				#size-cells = <1>;
 				compatible = "m25p64";
 				spi-max-frequency = <30000000>;
+				m25p,fast-read;
 				reg = <0>;
 				partition@0 {
 					label = "U-Boot-SPL";

arch/arm/boot/dts/imx31.dtsi

@@ -30,11 +30,11 @@
 		};
 	};
 
-	avic: avic-interrupt-controller@60000000 {
+	avic: interrupt-controller@68000000 {
 		compatible = "fsl,imx31-avic", "fsl,avic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		reg = <0x60000000 0x100000>;
+		reg = <0x68000000 0x100000>;
 	};
 
 	soc {
@@ -110,13 +110,6 @@
 				interrupts = <19>;
 				clocks = <&clks 25>;
 			};
-
-			clks: ccm@53f80000{
-				compatible = "fsl,imx31-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <0 31 0x04 0 53 0x04>;
-				#clock-cells = <1>;
-			};
 		};
 
 		aips@53f00000 { /* AIPS2 */
@@ -126,6 +119,13 @@
 			reg = <0x53f00000 0x100000>;
 			ranges;
 
+			clks: ccm@53f80000{
+				compatible = "fsl,imx31-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>, <53>;
+				#clock-cells = <1>;
+			};
+
 			gpt: timer@53f90000 {
 				compatible = "fsl,imx31-gpt";
 				reg = <0x53f90000 0x4000>;

arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi

@@ -319,8 +319,6 @@
 		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
 		model = "imx6q-nitrogen6_max-sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
 		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
@@ -401,6 +399,8 @@
 
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
 		clocks = <&clks 201>;
 		VDDA-supply = <&reg_2p5v>;

arch/arm/boot/dts/imx6qdl.dtsi

@@ -221,7 +221,7 @@
 					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
 						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
-						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",

arch/arm/boot/dts/kirkwood-ib62x0.dts

@@ -113,7 +113,7 @@
 
 	partition@e0000 {
 		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
+		reg = <0xe0000 0x20000>;
 	};
 
 	partition@100000 {

arch/arm/boot/dts/omap3-overo-base.dtsi

@@ -223,7 +223,9 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x20000000>;
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
+		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
 
 	nand@0,0 {
 		linux,mtd-name= "micron,mt29c4g96maz";

arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi

@@ -55,8 +55,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/omap3-overo-tobi-common.dtsi

@@ -27,8 +27,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi

@@ -15,9 +15,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <4 0 0x2b000000 0x1000000>,	/* CS4 */
-		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	smsc1: ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;

arch/arm/boot/dts/overlays/Makefile

@@ -16,6 +16,7 @@ dtbo-$(RPI_DT_OVERLAYS) += adau1977-adc.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += ads1015.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += ads7846.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += akkordion-iqdacplus.dtbo
+dtbo-$(RPI_DT_OVERLAYS) += allo-piano-dac-pcm512x-audio.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += at86rf233.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += audioinjector-wm8731-audio.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += audremap.dtbo
@@ -27,6 +28,7 @@ dtbo-$(RPI_DT_OVERLAYS) += dpi24.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += dwc-otg.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += dwc2.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += enc28j60.dtbo
+dtbo-$(RPI_DT_OVERLAYS) += enc28j60-spi2.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += gpio-ir.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += gpio-poweroff.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += hifiberry-amp.dtbo
@@ -40,6 +42,7 @@ dtbo-$(RPI_DT_OVERLAYS) += i2c-gpio.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += i2c-mux.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += i2c-pwm-pca9685a.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += i2c-rtc.dtbo
+dtbo-$(RPI_DT_OVERLAYS) += i2c-sensor.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += i2c0-bcm2708.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += i2c1-bcm2708.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += i2s-gpio28-31.dtbo
@@ -54,16 +57,20 @@ dtbo-$(RPI_DT_OVERLAYS) += mcp23017.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += mcp23s17.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += mcp2515-can0.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += mcp2515-can1.dtbo
+dtbo-$(RPI_DT_OVERLAYS) += mcp3008.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += mmc.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += mz61581.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += pi3-act-led.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += pi3-disable-bt.dtbo
+dtbo-$(RPI_DT_OVERLAYS) += pi3-disable-wifi.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += pi3-miniuart-bt.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += piscreen.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += piscreen2r.dtbo
+dtbo-$(RPI_DT_OVERLAYS) += pisound.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += pitft22.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += pitft28-capacitive.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += pitft28-resistive.dtbo
+dtbo-$(RPI_DT_OVERLAYS) += pitft35-resistive.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += pps-gpio.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += pwm.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += pwm-2chan.dtbo
@@ -87,6 +94,7 @@ dtbo-$(RPI_DT_OVERLAYS) += smi-dev.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += smi-nand.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += spi-gpio35-39.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += spi-rtc.dtbo
+dtbo-$(RPI_DT_OVERLAYS) += spi0-cs.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += spi0-hw-cs.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += spi1-1cs.dtbo
 dtbo-$(RPI_DT_OVERLAYS) += spi1-2cs.dtbo

arch/arm/boot/dts/overlays/README

@@ -61,7 +61,7 @@ this becomes a line in config.txt:
 
     dtoverlay=lirc-rpi
 
-This causes the file /boot/overlays/lirc-rpi-overlay.dtb to be loaded. By
+This causes the file /boot/overlays/lirc-rpi.dtbo to be loaded. By
 default it will use GPIOs 17 (out) and 18 (in), but this can be modified using
 DT parameters:
 
@@ -235,6 +235,26 @@ Params: 24db_digital_gain       Allow gain to be applied via the PCM512x codec
                                 that does not result in clipping/distortion!)
 
 
+Name:   allo-piano-dac-pcm512x-audio
+Info:   Configures the Allo Piano DAC (2.0/2.1) audio cards.
+        (NB. This initial support is for 2.0 channel audio ONLY! ie. stereo.
+        The subwoofer outputs on the Piano 2.1 are not currently supported!)
+Load:   dtoverlay=allo-piano-dac-pcm512x-audio,<param>
+Params: 24db_digital_gain       Allow gain to be applied via the PCM512x codec
+                                Digital volume control.
+                                (The default behaviour is that the Digital
+                                volume control is limited to a maximum of
+                                0dB. ie. it can attenuate but not provide
+                                gain. For most users, this will be desired
+                                as it will prevent clipping. By appending
+                                the 24db_digital_gain parameter, the Digital
+                                volume control will allow up to 24dB of
+                                gain. If this parameter is enabled, it is the
+                                responsibility of the user to ensure that
+                                the Digital volume control is set to a value
+                                that does not result in clipping/distortion!)
+
+
 Name:   at86rf233
 Info:   Configures the Atmel AT86RF233 802.15.4 low-power WPAN transceiver,
         connected to spi0.0
@@ -263,8 +283,7 @@ Params: swap_lr                 Reverse the channel allocation, which will also
 
 
 Name:   bmp085_i2c-sensor
-Info:   Configures the BMP085/BMP180 digital barometric pressure and temperature
-        sensors from Bosch Sensortec
+Info:   This overlay is now deprecated - see i2c-sensor
 Load:   dtoverlay=bmp085_i2c-sensor
 Params: <None>
 
@@ -324,13 +343,21 @@ Params: dr_mode                 Dual role mode: "host", "peripheral" or "otg"
 
 
 Name:   enc28j60
-Info:   Overlay for the Microchip ENC28J60 Ethernet Controller (SPI)
+Info:   Overlay for the Microchip ENC28J60 Ethernet Controller on SPI0
 Load:   dtoverlay=enc28j60,<param>=<val>
 Params: int_pin                 GPIO used for INT (default 25)
 
         speed                   SPI bus speed (default 12000000)
 
 
+Name:   enc28j60-spi2
+Info:   Overlay for the Microchip ENC28J60 Ethernet Controller on SPI2
+Load:   dtoverlay=enc28j60-spi2,<param>=<val>
+Params: int_pin                 GPIO used for INT (default 39)
+
+        speed                   SPI bus speed (default 12000000)
+
+
 Name:   gpio-ir
 Info:   Use GPIO pin as rc-core style infrared receiver input. The rc-core-
         based gpio_ir_recv driver maps received keys directly to a
@@ -478,7 +505,11 @@ Params: addr                    I2C address of PCA9685A (default 0x40)
 Name:   i2c-rtc
 Info:   Adds support for a number of I2C Real Time Clock devices
 Load:   dtoverlay=i2c-rtc,<param>=<val>
-Params: ds1307                  Select the DS1307 device
+Params: abx80x                  Select one of the ABx80x family:
+                                  AB0801, AB0803, AB0804, AB0805,
+                                  AB1801, AB1803, AB1804, AB1805
+
+        ds1307                  Select the DS1307 device
 
         ds1339                  Select the DS1339 device
 
@@ -494,12 +525,28 @@ Params: ds1307                  Select the DS1307 device
 
         pcf8563                 Select the PCF8563 device
 
-        trickle-resistor-ohms   Resistor value for trickle charge (DS1339-only)
+        trickle-diode-type      Diode type for trickle charge - "standard" or
+                                "schottky" (ABx80x only)
+
+        trickle-resistor-ohms   Resistor value for trickle charge (DS1339,
+                                ABx80x)
 
         wakeup-source           Specify that the RTC can be used as a wakeup
                                 source
 
 
+Name:   i2c-sensor
+Info:   Adds support for a number of I2C barometric pressure and temperature
+        sensors on i2c_arm
+Load:   dtoverlay=i2c-sensor,<param>=<val>
+Params: bmp085                  Select the Bosch sensortronic BMP085
+
+        bmp280                  Select the Bosch sensortronic BMP280
+
+        si7020                  Select the Silicon Labs Si7013/20/21 humidity/
+                                temperature sensor
+
+
 Name:   i2c0-bcm2708
 Info:   Enable the i2c_bcm2708 driver for the i2c0 bus. Not all pin combinations
         are usable on all platforms.
@@ -689,6 +736,15 @@ Params: oscillator              Clock frequency for the CAN controller (Hz)
         interrupt               GPIO for interrupt signal
 
 
+Name:   mcp3008
+Info:   Configures MCP3008 A/D converters
+        For devices on spi1 or spi2, the interfaces should be enabled
+        with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays.
+Load:   dtoverlay=mcp3008,<param>[=<val>]
+Params: spi<n>-<m>-present      boolean, configure device at spi<n>, cs<m>
+        spi<n>-<m>-speed        integer, set the spi bus speed for this device
+
+
 Name:   mmc
 Info:   Selects the bcm2835-mmc SD/MMC driver, optionally with overclock
 Load:   dtoverlay=mmc,<param>=<val>
@@ -746,6 +802,12 @@ Load:   dtoverlay=pi3-disable-bt
 Params: <None>
 
 
+Name:   pi3-disable-wifi
+Info:   Disable Pi3 onboard WiFi
+Load:   dtoverlay=pi3-disable-wifi
+Params: <None>
+
+
 Name:   pi3-miniuart-bt
 Info:   Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore
         UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum
@@ -788,6 +850,12 @@ Params: speed                   Display SPI bus speed
         xohms                   Touchpanel sensitivity (X-plate resistance)
 
 
+Name:   pisound
+Info:   Configures the Blokas Labs pisound card
+Load:   dtoverlay=pisound
+Params: <None>
+
+
 Name:   pitft22
 Info:   Adafruit PiTFT 2.2" screen
 Load:   dtoverlay=pitft22,<param>=<val>
@@ -834,6 +902,18 @@ Params: speed                   Display SPI bus speed
         debug                   Debug output level {0-7}
 
 
+Name:   pitft35-resistive
+Info:   Adafruit PiTFT 3.5" resistive touch screen
+Load:   dtoverlay=pitft35-resistive,<param>=<val>
+Params: speed                   Display SPI bus speed
+
+        rotate                  Display rotation {0,90,180,270}
+
+        fps                     Delay between frame updates
+
+        debug                   Debug output level {0-7}
+
+
 Name:   pps-gpio
 Info:   Configures the pps-gpio (pulse-per-second time signal via GPIO).
 Load:   dtoverlay=pps-gpio,<param>=<val>
@@ -1060,7 +1140,7 @@ Params: <None>
 
 
 Name:   spi-gpio35-39
-Info:   move SPI function block to GPIO 35 to 39
+Info:   Move SPI function block to GPIO 35 to 39
 Load:   dtoverlay=spi-gpio35-39
 Params: <None>
 
@@ -1071,6 +1151,13 @@ Load:   dtoverlay=spi-rtc,<param>=<val>
 Params: pcf2123                 Select the PCF2123 device
 
 
+Name:   spi0-cs
+Info:   Allows the (software) CS pins for SPI0 to be changed
+Load:   dtoverlay=spi0-cs,<param>=<val>
+Params: cs0_pin                 GPIO pin for CS0 (default 8)
+        cs1_pin                 GPIO pin for CS1 (default 7)
+
+
 Name:   spi0-hw-cs
 Info:   Re-enables hardware CS/CE (chip selects) for SPI0
 Load:   dtoverlay=spi0-hw-cs

arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts

@@ -0,0 +1,54 @@
+/*
+ * Definitions for Allo Piano DAC (2.0/2.1) boards
+ *
+ * NB. The Piano DAC 2.1 board contains 2x TI PCM5142 DAC's. One DAC is stereo
+ * (left/right) and the other provides a subwoofer output, using DSP on the
+ * chip for digital high/low pass crossover.
+ * The initial support for this hardware, that doesn't require any codec driver
+ * modifications, uses only one DAC chip for stereo (left/right) output, the
+ * chip with 0x4c slave address. The other chip at 0x4d is currently ignored!
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2708";
+
+	fragment@0 {
+		target = <&i2s>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c1>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			pcm5142@4c {
+				#sound-dai-cells = <0>;
+				compatible = "ti,pcm5142";
+				reg = <0x4c>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@2 {
+		target = <&sound>;
+		piano_dac: __overlay__ {
+			compatible = "allo,piano-dac";
+			i2s-controller = <&i2s>;
+			status = "okay";
+		};
+	};
+
+	__overrides__ {
+		24db_digital_gain =
+			<&piano_dac>,"allo,24db_digital_gain?";
+	};
+};

arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts

@@ -0,0 +1,47 @@
+// Overlay for the Microchip ENC28J60 Ethernet Controller - SPI2 Compute Module
+// Interrupt pin: 39
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2708";
+
+	fragment@0 {
+		target = <&spi2>;
+		__overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "okay";
+
+			eth1: enc28j60@0{
+				compatible = "microchip,enc28j60";
+				reg = <0>; /* CE0 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&eth1_pins>;
+				interrupt-parent = <&gpio>;
+				interrupts = <39 0x2>; /* falling edge */
+				spi-max-frequency = <12000000>;
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&gpio>;
+		__overlay__ {
+			eth1_pins: eth1_pins {
+				brcm,pins = <39>;
+				brcm,function = <0>; /* in */
+				brcm,pull = <0>; /* none */
+			};
+		};
+	};
+
+	__overrides__ {
+		int_pin = <&eth1>, "interrupts:0",
+		          <&eth1_pins>, "brcm,pins:0";
+		speed   = <&eth1>, "spi-max-frequency:0";
+	};
+};

arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts

@@ -12,6 +12,13 @@
 			#size-cells = <0>;
 			status = "okay";
 
+			abx80x: abx80x@69 {
+				compatible = "abracon,abx80x";
+				reg = <0x69>;
+				abracon,tc-diode = "standard";
+				abracon,tc-resistor = <0>;
+				status = "disable";
+			};
 			ds1307: ds1307@68 {
 				compatible = "maxim,ds1307";
 				reg = <0x68>;
@@ -56,6 +63,7 @@
 		};
 	};
 	__overrides__ {
+		abx80x = <&abx80x>,"status";
 		ds1307 = <&ds1307>,"status";
 		ds1339 = <&ds1339>,"status";
 		ds3231 = <&ds3231>,"status";
@@ -64,7 +72,9 @@
 		pcf2127 = <&pcf2127>,"status";
 		pcf8523 = <&pcf8523>,"status";
 		pcf8563 = <&pcf8563>,"status";
-		trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0";
+		trickle-diode-type = <&abx80x>,"abracon,tc-diode";
+		trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0",
+					<&abx80x>,"abracon,tc-resistor";
 		wakeup-source = <&ds1339>,"wakeup-source?",
 				<&ds3231>,"wakeup-source?",
 				<&mcp7940x>,"wakeup-source?",

arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts

@@ -0,0 +1,41 @@
+// Definitions for I2C based sensors using the Industrial IO interface.
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2708";
+
+	fragment@0 {
+		target = <&i2c_arm>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			bmp085: bmp085@77 {
+				compatible = "bosch,bmp085";
+				reg = <0x77>;
+				default-oversampling = <3>;
+				status = "disable";
+			};
+
+			bmp280: bmp280@76 {
+				compatible = "bosch,bmp280";
+				reg = <0x76>;
+				status = "disable";
+			};
+
+			si7020: si7020@40 {
+				compatible = "si7020";
+				reg = <0x40>;
+				status = "disable";
+			};
+		};
+	};
+
+	__overrides__ {
+		bmp085 = <&bmp085>,"status";
+		bmp280 = <&bmp280>,"status";
+		si7020 = <&si7020>,"status";
+	};
+};

arch/arm/boot/dts/overlays/mcp3008-overlay.dts

@@ -0,0 +1,205 @@
+/*
+ * Device tree overlay for Microchip mcp3008 10-Bit A/D Converters
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+	fragment@0 {
+		target = <&spidev0>;
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@1 {
+		target = <&spidev1>;
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@2 {
+		target-path = "spi1/spidev@0";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@3 {
+		target-path = "spi1/spidev@1";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@4 {
+		target-path = "spi1/spidev@2";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@5 {
+		target-path = "spi2/spidev@0";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@6 {
+		target-path = "spi2/spidev@1";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@7 {
+		target-path = "spi2/spidev@2";
+		__dormant__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@8 {
+		target = <&spi0>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3008_00: mcp3008@0 {
+				compatible = "mcp3008";
+				reg = <0>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@9 {
+		target = <&spi0>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3008_01: mcp3008@1 {
+				compatible = "mcp3008";
+				reg = <1>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@10 {
+		target = <&spi1>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3008_10: mcp3008@0 {
+				compatible = "mcp3008";
+				reg = <0>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@11 {
+		target = <&spi1>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3008_11: mcp3008@1 {
+				compatible = "mcp3008";
+				reg = <1>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@12 {
+		target = <&spi1>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3008_12: mcp3008@2 {
+				compatible = "mcp3008";
+				reg = <2>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@13 {
+		target = <&spi2>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3008_20: mcp3008@0 {
+				compatible = "mcp3008";
+				reg = <0>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@14 {
+		target = <&spi2>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3008_21: mcp3008@1 {
+				compatible = "mcp3008";
+				reg = <1>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	fragment@15 {
+		target = <&spi2>;
+		__dormant__ {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcp3008_22: mcp3008@2 {
+				compatible = "mcp3008";
+				reg = <2>;
+				spi-max-frequency = <1600000>;
+			};
+		};
+	};
+
+	__overrides__ {
+		spi0-0-present = <0>, "+0+8";
+		spi0-1-present = <0>, "+1+9";
+		spi1-0-present = <0>, "+2+10";
+		spi1-1-present = <0>, "+3+11";
+		spi1-2-present = <0>, "+4+12";
+		spi2-0-present = <0>, "+5+13";
+		spi2-1-present = <0>, "+6+14";
+		spi2-2-present = <0>, "+7+15";
+		spi0-0-speed = <&mcp3008_00>, "spi-max-frequency:0";
+		spi0-1-speed = <&mcp3008_01>, "spi-max-frequency:0";
+		spi1-0-speed = <&mcp3008_10>, "spi-max-frequency:0";
+		spi1-1-speed = <&mcp3008_11>, "spi-max-frequency:0";
+		spi1-2-speed = <&mcp3008_12>, "spi-max-frequency:0";
+		spi2-0-speed = <&mcp3008_20>, "spi-max-frequency:0";
+		spi2-1-speed = <&mcp3008_21>, "spi-max-frequency:0";
+		spi2-2-speed = <&mcp3008_22>, "spi-max-frequency:0";
+	};
+};

arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts

@@ -0,0 +1,13 @@
+/dts-v1/;
+/plugin/;
+
+/{
+	compatible = "brcm,bcm2708";
+
+	fragment@0 {
+		target = <&mmc>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+};

arch/arm/boot/dts/overlays/pisound-overlay.dts

@@ -0,0 +1,120 @@
+/*
+ * pisound Linux kernel module.
+ * Copyright (C) 2016  Vilniaus Blokas UAB, http://blokas.io/pisound
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "brcm,bcm2708";
+
+	fragment@0 {
+		target = <&spi0>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&spidev0>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@2 {
+		target = <&spidev1>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@3 {
+		target = <&spi0>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pisound_spi: pisound_spi@0{
+				compatible = "blokaslabs,pisound-spi";
+				reg = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_pins>;
+				spi-max-frequency = <1000000>;
+			};
+		};
+	};
+
+	fragment@4 {
+		target-path = "/";
+		__overlay__ {
+			pcm5102a-codec {
+				#sound-dai-cells = <0>;
+				compatible = "ti,pcm5102a";
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@5 {
+		target = <&sound>;
+		__overlay__ {
+			compatible = "blokaslabs,pisound";
+			i2s-controller = <&i2s>;
+			status = "okay";
+
+			pinctrl-0 = <&pisound_button_pins>;
+
+			osr-gpios =
+				<&gpio 13 GPIO_ACTIVE_HIGH>,
+				<&gpio 26 GPIO_ACTIVE_HIGH>,
+				<&gpio 16 GPIO_ACTIVE_HIGH>;
+
+			reset-gpios =
+				<&gpio 12 GPIO_ACTIVE_HIGH>,
+				<&gpio 24 GPIO_ACTIVE_HIGH>;
+
+			data_available-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+
+			button-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fragment@6 {
+		target = <&gpio>;
+		__overlay__ {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pisound_button_pins>;
+
+			pisound_button_pins: pisound_button_pins {
+				brcm,pins = <17>;
+				brcm,function = <0>; // Input
+				brcm,pull = <2>; // Pull-Up
+			};
+		};
+	};
+
+	fragment@7 {
+		target = <&i2s>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+};

arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts

@@ -0,0 +1,121 @@
+/*
+ * Device Tree overlay for Adafruit PiTFT 3.5" resistive touch screen
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+	fragment@0 {
+		target = <&spi0>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&spidev0>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@2 {
+		target = <&spidev1>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@3 {
+		target = <&gpio>;
+		__overlay__ {
+			pitft_pins: pitft_pins {
+				brcm,pins = <24 25>;
+				brcm,function = <0 1>; /* in out */
+				brcm,pull = <2 0>; /* pullup none */
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&spi0>;
+		__overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pitft: pitft@0{
+				compatible = "himax,hx8357d";
+				reg = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pitft_pins>;
+
+				spi-max-frequency = <32000000>;
+				rotate = <90>;
+				fps = <25>;
+				bgr;
+				buswidth = <8>;
+				dc-gpios = <&gpio 25 0>;
+				debug = <0>;
+			};
+
+			pitft_ts@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stmpe610";
+				reg = <1>;
+
+				spi-max-frequency = <500000>;
+				irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */
+				interrupts = <24 2>; /* high-to-low edge triggered */
+				interrupt-parent = <&gpio>;
+				interrupt-controller;
+
+				stmpe_touchscreen {
+					compatible = "st,stmpe-ts";
+					st,sample-time = <4>;
+					st,mod-12b = <1>;
+					st,ref-sel = <0>;
+					st,adc-freq = <2>;
+					st,ave-ctrl = <3>;
+					st,touch-det-delay = <4>;
+					st,settling = <2>;
+					st,fraction-z = <7>;
+					st,i-drive = <0>;
+				};
+
+				stmpe_gpio: stmpe_gpio {
+					#gpio-cells = <2>;
+					compatible = "st,stmpe-gpio";
+					/*
+					 * only GPIO2 is wired/available
+					 * and it is wired to the backlight
+					 */
+					st,norequest-mask = <0x7b>;
+				};
+			};
+		};
+	};
+
+	fragment@5 {
+		target-path = "/soc";
+		__overlay__ {
+			backlight {
+				compatible = "gpio-backlight";
+				gpios = <&stmpe_gpio 2 0>;
+				default-on;
+			};
+		};
+	};
+
+	__overrides__ {
+		speed =   <&pitft>,"spi-max-frequency:0";
+		rotate =  <&pitft>,"rotate:0";
+		fps =     <&pitft>,"fps:0";
+		debug =   <&pitft>,"debug:0";
+	};
+};

arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts

@@ -18,14 +18,14 @@
 	fragment@1 {
 		target = <&spi0_cs_pins>;
 		__overlay__ {
-			bcrm,pins = <36 35>;
+			brcm,pins = <36 35>;
 		};
 	};
 
 	fragment@2 {
 		target = <&spi0_pins>;
 		__overlay__ {
-			bcrm,pins = <37 38 39>;
+			brcm,pins = <37 38 39>;
 		};
 	};
 };

arch/arm/boot/dts/overlays/spi0-cs-overlay.dts

@@ -0,0 +1,29 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
+
+	fragment@0 {
+		target = <&spi0_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <8 7>;
+		};
+	};
+
+	fragment@1 {
+		target = <&spi0>;
+		frag1: __overlay__ {
+			cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
+			status = "okay";
+		};
+	};
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs1_pin  = <&frag0>,"brcm,pins:4",
+			   <&frag1>,"cs-gpios:16";
+	};
+};

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -5,6 +5,7 @@
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 / {
 	model = "Qualcomm APQ8064";
@@ -354,22 +355,50 @@
 
 					compatible = "qcom,pm8921-gpio";
 					reg = <0x150>;
-					interrupts = <192 1>, <193 1>, <194 1>,
-						     <195 1>, <196 1>, <197 1>,
-						     <198 1>, <199 1>, <200 1>,
-						     <201 1>, <202 1>, <203 1>,
-						     <204 1>, <205 1>, <206 1>,
-						     <207 1>, <208 1>, <209 1>,
-						     <210 1>, <211 1>, <212 1>,
-						     <213 1>, <214 1>, <215 1>,
-						     <216 1>, <217 1>, <218 1>,
-						     <219 1>, <220 1>, <221 1>,
-						     <222 1>, <223 1>, <224 1>,
-						     <225 1>, <226 1>, <227 1>,
-						     <228 1>, <229 1>, <230 1>,
-						     <231 1>, <232 1>, <233 1>,
-						     <234 1>, <235 1>;
-
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
 					gpio-controller;
 					#gpio-cells = <2>;
 
@@ -381,9 +410,18 @@
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupts =
-					<128 1>, <129 1>, <130 1>, <131 1>,
-					<132 1>, <133 1>, <134 1>, <135 1>,
-					<136 1>, <137 1>, <138 1>, <139 1>;
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
 				};
 
 				rtc@11d {

arch/arm/boot/dts/r8a7794.dtsi

@@ -1023,7 +1023,7 @@
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>,
+			clocks = <&mp_clk>, <&hp_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
 			#clock-cells = <1>;

arch/arm/boot/dts/stih407-family.dtsi

@@ -497,8 +497,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mmc0>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			bus-width = <8>;
 			non-removable;
 		};
@@ -512,8 +513,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd1>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			resets = <&softreset STIH407_MMC1_SOFTRESET>;
 			bus-width = <4>;
 		};

arch/arm/boot/dts/stih410.dtsi

@@ -41,7 +41,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -57,7 +58,8 @@
 			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -71,7 +73,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a83c00 0x100>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -87,7 +90,8 @@
 			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -83,7 +83,7 @@
 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};

arch/arm/common/sa1111.c

@@ -869,9 +869,9 @@ struct sa1111_save_data {
 
 #ifdef CONFIG_PM
 
-static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
+static int sa1111_suspend_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags;
 	unsigned int val;
@@ -934,9 +934,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
  *	restored by their respective drivers, and must be called
  *	via LDM after this function.
  */
-static int sa1111_resume(struct platform_device *dev)
+static int sa1111_resume_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags, id;
 	void __iomem *base;
@@ -952,7 +952,7 @@ static int sa1111_resume(struct platform_device *dev)
 	id = sa1111_readl(sachip->base + SA1111_SKID);
 	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 		__sa1111_remove(sachip);
-		platform_set_drvdata(dev, NULL);
+		dev_set_drvdata(dev, NULL);
 		kfree(save);
 		return 0;
 	}
@@ -1003,8 +1003,8 @@ static int sa1111_resume(struct platform_device *dev)
 }
 
 #else
-#define sa1111_suspend NULL
-#define sa1111_resume  NULL
+#define sa1111_suspend_noirq NULL
+#define sa1111_resume_noirq  NULL
 #endif
 
 static int sa1111_probe(struct platform_device *pdev)
@@ -1038,6 +1038,11 @@ static int sa1111_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct dev_pm_ops sa1111_pm_ops = {
+	.suspend_noirq = sa1111_suspend_noirq,
+	.resume_noirq = sa1111_resume_noirq,
+};
+
 /*
  *	Not sure if this should be on the system bus or not yet.
  *	We really want some way to register a system device at
@@ -1050,10 +1055,9 @@ static int sa1111_remove(struct platform_device *pdev)
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
 	.remove		= sa1111_remove,
-	.suspend	= sa1111_suspend,
-	.resume		= sa1111_resume,
 	.driver		= {
 		.name	= "sa1111",
+		.pm	= &sa1111_pm_ops,
 	},
 };
 

arch/arm/configs/bcm2709_defconfig

@@ -358,6 +358,7 @@ CONFIG_BAYCOM_SER_HDX=m
 CONFIG_YAM=m
 CONFIG_CAN=m
 CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
 CONFIG_CAN_MCP251X=m
 CONFIG_IRDA=m
 CONFIG_IRLAN=m
@@ -407,7 +408,9 @@ CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=5
 CONFIG_MTD=m
 CONFIG_MTD_BLOCK=m
+CONFIG_MTD_M25P80=m
 CONFIG_MTD_NAND=m
+CONFIG_MTD_SPI_NOR=m
 CONFIG_MTD_UBI=m
 CONFIG_OF_CONFIGFS=y
 CONFIG_ZRAM=m
@@ -438,6 +441,7 @@ CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_LOG_USERSPACE=m
 CONFIG_DM_RAID=m
@@ -879,7 +883,10 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m
 CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m
 CONFIG_SND_DIGIDAC1_SOUNDCARD=m
 CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m
+CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m
+CONFIG_SND_PISOUND=m
 CONFIG_SND_SOC_ADAU1701=m
+CONFIG_SND_SOC_AK4554=m
 CONFIG_SND_SOC_WM8804_I2C=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SOUND_PRIME=m
@@ -963,6 +970,7 @@ CONFIG_USB_MICROTEK=m
 CONFIG_USBIP_CORE=m
 CONFIG_USBIP_VHCI_HCD=m
 CONFIG_USBIP_HOST=m
+CONFIG_USB_DWC2=m
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
@@ -1036,6 +1044,20 @@ CONFIG_USB_SPEEDTOUCH=m
 CONFIG_USB_CXACRU=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_XUSBATM=m
+CONFIG_USB_GADGET=m
+CONFIG_USB_ZERO=m
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_HID=m
+CONFIG_USB_G_WEBCAM=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_BCM2835=y
@@ -1058,6 +1080,7 @@ CONFIG_LEDS_TRIGGER_CAMERA=m
 CONFIG_LEDS_TRIGGER_INPUT=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
+CONFIG_RTC_DRV_ABX80X=m
 CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_DS1374=m
 CONFIG_RTC_DRV_DS1672=m
@@ -1115,6 +1138,7 @@ CONFIG_FB_TFT_BD663474=m
 CONFIG_FB_TFT_HX8340BN=m
 CONFIG_FB_TFT_HX8347D=m
 CONFIG_FB_TFT_HX8353D=m
+CONFIG_FB_TFT_HX8357D=m
 CONFIG_FB_TFT_ILI9163=m
 CONFIG_FB_TFT_ILI9320=m
 CONFIG_FB_TFT_ILI9325=m
@@ -1151,6 +1175,7 @@ CONFIG_IIO_KFIFO_BUF=m
 CONFIG_MCP320X=m
 CONFIG_MCP3422=m
 CONFIG_DHT11=m
+CONFIG_HTU21=m
 CONFIG_PWM_BCM2835=m
 CONFIG_PWM_PCA9685=m
 CONFIG_RASPBERRYPI_FIRMWARE=y

arch/arm/configs/bcmrpi_defconfig

@@ -351,6 +351,7 @@ CONFIG_BAYCOM_SER_HDX=m
 CONFIG_YAM=m
 CONFIG_CAN=m
 CONFIG_CAN_VCAN=m
+CONFIG_CAN_SLCAN=m
 CONFIG_CAN_MCP251X=m
 CONFIG_IRDA=m
 CONFIG_IRLAN=m
@@ -400,7 +401,9 @@ CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=5
 CONFIG_MTD=m
 CONFIG_MTD_BLOCK=m
+CONFIG_MTD_M25P80=m
 CONFIG_MTD_NAND=m
+CONFIG_MTD_SPI_NOR=m
 CONFIG_MTD_UBI=m
 CONFIG_OF_CONFIGFS=y
 CONFIG_ZRAM=m
@@ -431,6 +434,7 @@ CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_LOG_USERSPACE=m
 CONFIG_DM_RAID=m
@@ -871,7 +875,10 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m
 CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m
 CONFIG_SND_DIGIDAC1_SOUNDCARD=m
 CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m
+CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m
+CONFIG_SND_PISOUND=m
 CONFIG_SND_SOC_ADAU1701=m
+CONFIG_SND_SOC_AK4554=m
 CONFIG_SND_SOC_WM8804_I2C=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SOUND_PRIME=m
@@ -1065,6 +1072,7 @@ CONFIG_LEDS_TRIGGER_CAMERA=m
 CONFIG_LEDS_TRIGGER_INPUT=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
+CONFIG_RTC_DRV_ABX80X=m
 CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_DS1374=m
 CONFIG_RTC_DRV_DS1672=m
@@ -1122,6 +1130,7 @@ CONFIG_FB_TFT_BD663474=m
 CONFIG_FB_TFT_HX8340BN=m
 CONFIG_FB_TFT_HX8347D=m
 CONFIG_FB_TFT_HX8353D=m
+CONFIG_FB_TFT_HX8357D=m
 CONFIG_FB_TFT_ILI9163=m
 CONFIG_FB_TFT_ILI9320=m
 CONFIG_FB_TFT_ILI9325=m
@@ -1158,6 +1167,7 @@ CONFIG_IIO_KFIFO_BUF=m
 CONFIG_MCP320X=m
 CONFIG_MCP3422=m
 CONFIG_DHT11=m
+CONFIG_HTU21=m
 CONFIG_PWM_BCM2835=m
 CONFIG_PWM_PCA9685=m
 CONFIG_RASPBERRYPI_FIRMWARE=y

arch/arm/crypto/aes-ce-glue.c

@@ -87,8 +87,13 @@ static int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
 		u32 *rki = ctx->key_enc + (i * kwords);
 		u32 *rko = rki + kwords;
 
+#ifndef CONFIG_CPU_BIG_ENDIAN
 		rko[0] = ror32(ce_aes_sub(rki[kwords - 1]), 8);
 		rko[0] = rko[0] ^ rki[0] ^ rcon[i];
+#else
+		rko[0] = rol32(ce_aes_sub(rki[kwords - 1]), 8);
+		rko[0] = rko[0] ^ rki[0] ^ (rcon[i] << 24);
+#endif
 		rko[1] = rko[0] ^ rki[1];
 		rko[2] = rko[1] ^ rki[2];
 		rko[3] = rko[2] ^ rki[3];
@@ -279,7 +284,7 @@ static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		err = blkcipher_walk_done(desc, &walk,
 					  walk.nbytes % AES_BLOCK_SIZE);
 	}
-	if (nbytes) {
+	if (walk.nbytes % AES_BLOCK_SIZE) {
 		u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 __aligned(8) tail[AES_BLOCK_SIZE];

arch/arm/crypto/ghash-ce-glue.c

@@ -226,6 +226,27 @@ static int ghash_async_digest(struct ahash_request *req)
 	}
 }
 
+static int ghash_async_import(struct ahash_request *req, const void *in)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+
+	desc->tfm = cryptd_ahash_child(ctx->cryptd_tfm);
+	desc->flags = req->base.flags;
+
+	return crypto_shash_import(desc, in);
+}
+
+static int ghash_async_export(struct ahash_request *req, void *out)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+
+	return crypto_shash_export(desc, out);
+}
+
 static int ghash_async_setkey(struct crypto_ahash *tfm, const u8 *key,
 			      unsigned int keylen)
 {
@@ -274,7 +295,10 @@ static struct ahash_alg ghash_async_alg = {
 	.final			= ghash_async_final,
 	.setkey			= ghash_async_setkey,
 	.digest			= ghash_async_digest,
+	.import			= ghash_async_import,
+	.export			= ghash_async_export,
 	.halg.digestsize	= GHASH_DIGEST_SIZE,
+	.halg.statesize		= sizeof(struct ghash_desc_ctx),
 	.halg.base		= {
 		.cra_name	= "ghash",
 		.cra_driver_name = "ghash-ce",

arch/arm/include/asm/cputype.h

@@ -81,6 +81,9 @@
 #define ARM_CPU_XSCALE_ARCH_V2		0x4000
 #define ARM_CPU_XSCALE_ARCH_V3		0x6000
 
+/* Qualcomm implemented cores */
+#define ARM_CPU_PART_SCORPION		0x510002d0
+
 extern unsigned int processor_id;
 
 #ifdef CONFIG_CPU_CP15

arch/arm/include/asm/dma-mapping.h

@@ -119,7 +119,7 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
 /* The ARM override for dma_max_pfn() */
 static inline unsigned long dma_max_pfn(struct device *dev)
 {
-	return PHYS_PFN_OFFSET + dma_to_pfn(dev, *dev->dma_mask);
+	return dma_to_pfn(dev, *dev->dma_mask);
 }
 #define dma_max_pfn(dev) dma_max_pfn(dev)
 

arch/arm/include/asm/floppy.h

@@ -17,7 +17,7 @@
 
 #define fd_outb(val,port)			\
 	do {					\
-		if ((port) == FD_DOR)		\
+		if ((port) == (u32)FD_DOR)	\
 			fd_setdor((val));	\
 		else				\
 			outb((val),(port));	\

arch/arm/kernel/devtree.c

@@ -87,6 +87,8 @@ void __init arm_dt_init_cpu_maps(void)
 		return;
 
 	for_each_child_of_node(cpus, cpu) {
+		const __be32 *cell;
+		int prop_bytes;
 		u32 hwid;
 
 		if (of_node_cmp(cpu->type, "cpu"))
@@ -98,7 +100,8 @@ void __init arm_dt_init_cpu_maps(void)
 		 * properties is considered invalid to build the
 		 * cpu_logical_map.
 		 */
-		if (of_property_read_u32(cpu, "reg", &hwid)) {
+		cell = of_get_property(cpu, "reg", &prop_bytes);
+		if (!cell || prop_bytes < sizeof(*cell)) {
 			pr_debug(" * %s missing reg property\n",
 				     cpu->full_name);
 			of_node_put(cpu);
@@ -106,10 +109,15 @@ void __init arm_dt_init_cpu_maps(void)
 		}
 
 		/*
-		 * 8 MSBs must be set to 0 in the DT since the reg property
+		 * Bits n:24 must be set to 0 in the DT since the reg property
 		 * defines the MPIDR[23:0].
 		 */
-		if (hwid & ~MPIDR_HWID_BITMASK) {
+		do {
+			hwid = be32_to_cpu(*cell++);
+			prop_bytes -= sizeof(*cell);
+		} while (!hwid && prop_bytes > 0);
+
+		if (prop_bytes || (hwid & ~MPIDR_HWID_BITMASK)) {
 			of_node_put(cpu);
 			return;
 		}

arch/arm/kernel/hw_breakpoint.c

@@ -1066,6 +1066,22 @@ static int __init arch_hw_breakpoint_init(void)
 		return 0;
 	}
 
+	/*
+	 * Scorpion CPUs (at least those in APQ8060) seem to set DBGPRSR.SPD
+	 * whenever a WFI is issued, even if the core is not powered down, in
+	 * violation of the architecture.  When DBGPRSR.SPD is set, accesses to
+	 * breakpoint and watchpoint registers are treated as undefined, so
+	 * this results in boot time and runtime failures when these are
+	 * accessed and we unexpectedly take a trap.
+	 *
+	 * It's not clear if/how this can be worked around, so we blacklist
+	 * Scorpion CPUs to avoid these issues.
+	*/
+	if (read_cpuid_part() == ARM_CPU_PART_SCORPION) {
+		pr_info("Scorpion CPU detected. Hardware breakpoints and watchpoints disabled\n");
+		return 0;
+	}
+
 	has_ossr = core_has_os_save_restore();
 
 	/* Determine how many BRPs/WRPs are available. */

arch/arm/kernel/smp_tlb.c

@@ -9,6 +9,7 @@
  */
 #include <linux/preempt.h>
 #include <linux/smp.h>
+#include <linux/uaccess.h>
 
 #include <asm/smp_plat.h>
 #include <asm/tlbflush.h>
@@ -40,8 +41,11 @@ static inline void ipi_flush_tlb_mm(void *arg)
 static inline void ipi_flush_tlb_page(void *arg)
 {
 	struct tlb_args *ta = (struct tlb_args *)arg;
+	unsigned int __ua_flags = uaccess_save_and_enable();
 
 	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
+
+	uaccess_restore(__ua_flags);
 }
 
 static inline void ipi_flush_tlb_kernel_page(void *arg)
@@ -54,8 +58,11 @@ static inline void ipi_flush_tlb_kernel_page(void *arg)
 static inline void ipi_flush_tlb_range(void *arg)
 {
 	struct tlb_args *ta = (struct tlb_args *)arg;
+	unsigned int __ua_flags = uaccess_save_and_enable();
 
 	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+
+	uaccess_restore(__ua_flags);
 }
 
 static inline void ipi_flush_tlb_kernel_range(void *arg)

arch/arm/kvm/arm.c

@@ -155,8 +155,6 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	int i;
 
-	kvm_free_stage2_pgd(kvm);
-
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		if (kvm->vcpus[i]) {
 			kvm_arch_vcpu_free(kvm->vcpus[i]);

arch/arm/kvm/mmu.c

@@ -1852,6 +1852,7 @@ void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots)
 
 void kvm_arch_flush_shadow_all(struct kvm *kvm)
 {
+	kvm_free_stage2_pgd(kvm);
 }
 
 void kvm_arch_flush_shadow_memslot(struct kvm *kvm,

arch/arm/mach-davinci/da850.c

@@ -298,6 +298,16 @@ static struct clk emac_clk = {
 	.gpsc		= 1,
 };
 
+/*
+ * In order to avoid adding the emac_clk to the clock lookup table twice (and
+ * screwing up the linked list in the process) create a separate clock for
+ * mdio inheriting the rate from emac_clk.
+ */
+static struct clk mdio_clk = {
+	.name		= "mdio",
+	.parent		= &emac_clk,
+};
+
 static struct clk mcasp_clk = {
 	.name		= "mcasp",
 	.parent		= &pll0_sysclk2,
@@ -462,7 +472,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
-	CLK("davinci_mdio.0",	"fck",		&emac_clk),
+	CLK("davinci_mdio.0",	"fck",		&mdio_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("da8xx_lcdc.0",	"fck",		&lcdc_clk),
 	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),

arch/arm/mach-imx/pm-imx6.c

@@ -295,7 +295,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val &= ~BM_CLPCR_SBYOS;
 		if (cpu_is_imx6sl())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
-		if (cpu_is_imx6sl() || cpu_is_imx6sx())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -310,7 +310,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
-		if (cpu_is_imx6sl())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
 		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -243,10 +243,9 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 		save_state = 1;
 		break;
 	case PWRDM_POWER_RET:
-		if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) {
+		if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE))
 			save_state = 0;
-			break;
-		}
+		break;
 	default:
 		/*
 		 * CPUx CSWR is invalid hardware state. Also CPUx OSWR

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c

@@ -1474,6 +1474,7 @@ static void omap_hwmod_am43xx_rst(void)
 {
 	RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET);
 	RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET);
+	RSTST(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTST_OFFSET);
 	RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET);
 }
 

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -723,8 +723,20 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
  * display serial interface controller
  */
 
+static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 	.name = "dsi",
+	.sysc	= &omap3xxx_dsi_sysc,
 };
 
 static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {

arch/arm/mach-omap2/prcm43xx.h

@@ -39,6 +39,7 @@
 
 /* RM RSTST offsets */
 #define AM43XX_RM_GFX_RSTST_OFFSET			0x0014
+#define AM43XX_RM_PER_RSTST_OFFSET			0x0014
 #define AM43XX_RM_WKUP_RSTST_OFFSET			0x0014
 
 /* CM instances */

arch/arm/mach-pxa/idp.c

@@ -83,7 +83,8 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_USE_DMA | SMC91X_NOWAIT,
 };
 
 static struct platform_device smc91x_device = {

arch/arm/mach-pxa/pxa_cplds_irqs.c

@@ -41,30 +41,35 @@ static irqreturn_t cplds_irq_handler(int in_irq, void *d)
 	unsigned long pending;
 	unsigned int bit;
 
-	pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
-	for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
-		generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
+	do {
+		pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+		for_each_set_bit(bit, &pending, CPLDS_NB_IRQ) {
+			generic_handle_irq(irq_find_mapping(fpga->irqdomain,
+							    bit));
+		}
+	} while (pending);
 
 	return IRQ_HANDLED;
 }
 
-static void cplds_irq_mask_ack(struct irq_data *d)
+static void cplds_irq_mask(struct irq_data *d)
 {
 	struct cplds *fpga = irq_data_get_irq_chip_data(d);
 	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int set, bit = BIT(cplds_irq);
+	unsigned int bit = BIT(cplds_irq);
 
 	fpga->irq_mask &= ~bit;
 	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
-	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
 }
 
 static void cplds_irq_unmask(struct irq_data *d)
 {
 	struct cplds *fpga = irq_data_get_irq_chip_data(d);
 	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int bit = BIT(cplds_irq);
+	unsigned int set, bit = BIT(cplds_irq);
+
+	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
 
 	fpga->irq_mask |= bit;
 	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
@@ -72,7 +77,8 @@ static void cplds_irq_unmask(struct irq_data *d)
 
 static struct irq_chip cplds_irq_chip = {
 	.name		= "pxa_cplds",
-	.irq_mask_ack	= cplds_irq_mask_ack,
+	.irq_ack	= cplds_irq_mask,
+	.irq_mask	= cplds_irq_mask,
 	.irq_unmask	= cplds_irq_unmask,
 	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
 };

arch/arm/mach-pxa/xcep.c

@@ -120,7 +120,8 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata xcep_smc91x_info = {
-	.flags	= SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
 };
 
 static struct platform_device smc91x_device = {

arch/arm/mach-realview/core.c

@@ -95,7 +95,8 @@ static struct smsc911x_platform_config smsc911x_config = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_NOWAIT,
 };
 
 static struct platform_device realview_eth_device = {

arch/arm/mach-sa1100/clock.c

@@ -125,6 +125,8 @@ static unsigned long clk_36864_get_rate(struct clk *clk)
 }
 
 static struct clkops clk_36864_ops = {
+	.enable		= clk_cpu_enable,
+	.disable	= clk_cpu_disable,
 	.get_rate	= clk_36864_get_rate,
 };
 
@@ -140,9 +142,8 @@ static struct clk_lookup sa11xx_clkregs[] = {
 	CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
 };
 
-static int __init sa11xx_clk_init(void)
+int __init sa11xx_clk_init(void)
 {
 	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
 	return 0;
 }
-core_initcall(sa11xx_clk_init);

arch/arm/mach-sa1100/generic.c

@@ -34,6 +34,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 #include <clocksource/pxa.h>
@@ -95,6 +96,8 @@ static void sa1100_power_off(void)
 
 void sa11x0_restart(enum reboot_mode mode, const char *cmd)
 {
+	clear_reset_status(RESET_STATUS_ALL);
+
 	if (mode == REBOOT_SOFT) {
 		/* Jump into ROM at address 0 */
 		soft_restart(0);
@@ -388,6 +391,7 @@ void __init sa1100_init_irq(void)
 	sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
 
 	sa1100_init_gpio();
+	sa11xx_clk_init();
 }
 
 /*

arch/arm/mach-sa1100/generic.h

@@ -44,3 +44,5 @@ int sa11x0_pm_init(void);
 #else
 static inline int sa11x0_pm_init(void) { return 0; }
 #endif
+
+int sa11xx_clk_init(void);

arch/arm/mach-sa1100/pleb.c

@@ -45,7 +45,7 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_16BIT | SMC91X_USE_8BIT | SMC91X_NOWAIT,
 };
 
 static struct platform_device smc91x_device = {

arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c

@@ -41,40 +41,27 @@
 
 #define REGULATOR_IRQ_MASK	BIT(2)	/* IRQ2, active low */
 
+/* start of DA9210 System Control and Event Registers */
+#define DA9210_REG_MASK_A		0x54
+
 static void __iomem *irqc;
 
-static const u8 da9063_mask_regs[] = {
-	DA9063_REG_IRQ_MASK_A,
-	DA9063_REG_IRQ_MASK_B,
-	DA9063_REG_IRQ_MASK_C,
-	DA9063_REG_IRQ_MASK_D,
+/* first byte sets the memory pointer, following are consecutive reg values */
+static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
+static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
+
+static struct i2c_msg da9xxx_msgs[2] = {
+	{
+		.addr = 0x58,
+		.len = ARRAY_SIZE(da9063_irq_clr),
+		.buf = da9063_irq_clr,
+	}, {
+		.addr = 0x68,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
+	},
 };
 
-/* DA9210 System Control and Event Registers */
-#define DA9210_REG_MASK_A		0x54
-#define DA9210_REG_MASK_B		0x55
-
-static const u8 da9210_mask_regs[] = {
-	DA9210_REG_MASK_A,
-	DA9210_REG_MASK_B,
-};
-
-static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[],
-			     unsigned int nregs)
-{
-	unsigned int i;
-
-	dev_info(&client->dev, "Masking %s interrupt sources\n", client->name);
-
-	for (i = 0; i < nregs; i++) {
-		int error = i2c_smbus_write_byte_data(client, regs[i], ~0);
-		if (error) {
-			dev_err(&client->dev, "i2c error %d\n", error);
-			return;
-		}
-	}
-}
-
 static int regulator_quirk_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
 {
@@ -93,12 +80,15 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 	client = to_i2c_client(dev);
 	dev_dbg(dev, "Detected %s\n", client->name);
 
-	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")))
-		da9xxx_mask_irqs(client, da9063_mask_regs,
-				 ARRAY_SIZE(da9063_mask_regs));
-	else if (client->addr == 0x68 && !strcmp(client->name, "da9210"))
-		da9xxx_mask_irqs(client, da9210_mask_regs,
-				 ARRAY_SIZE(da9210_mask_regs));
+	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
+		int ret;
+
+		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
+		if (ret != ARRAY_SIZE(da9xxx_msgs))
+			dev_err(&client->dev, "i2c error %d\n", ret);
+	}
 
 	mon = ioread32(irqc + IRQC_MONITOR);
 	if (mon & REGULATOR_IRQ_MASK)

arch/arm/mach-ux500/pm.c

@@ -134,8 +134,8 @@ bool prcmu_pending_irq(void)
  */
 bool prcmu_is_cpu_in_wfi(int cpu)
 {
-	return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 :
-		     PRCM_ARM_WFI_STANDBY_WFI0;
+	return readl(PRCM_ARM_WFI_STANDBY) &
+		(cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : PRCM_ARM_WFI_STANDBY_WFI0);
 }
 
 /*

arch/arm/mach-zynq/common.c

@@ -59,7 +59,7 @@ void __iomem *zynq_scu_base;
 static void __init zynq_memory_init(void)
 {
 	if (!__pa(PAGE_OFFSET))
-		memblock_reserve(__pa(PAGE_OFFSET), __pa(swapper_pg_dir));
+		memblock_reserve(__pa(PAGE_OFFSET), 0x80000);
 }
 
 static struct platform_device zynq_cpuidle_device = {

arch/arm/vfp/vfpmodule.c

@@ -183,8 +183,11 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 		 * case the thread migrates to a different CPU. The
 		 * restoring is done lazily.
 		 */
-		if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu])
-			vfp_save_state(vfp_current_hw_state[cpu], fpexc);
+		if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) {
+			/* vfp_save_state oopses on VFP11 if EX bit set */
+			fmxr(FPEXC, fpexc & ~FPEXC_EX);
+ 			vfp_save_state(vfp_current_hw_state[cpu], fpexc);
+		}
 #endif
 
 		/*
@@ -467,13 +470,16 @@ static int vfp_pm_suspend(void)
 	/* if vfp is on, then save state for resumption */
 	if (fpexc & FPEXC_EN) {
 		pr_debug("%s: saving vfp state\n", __func__);
+		/* vfp_save_state oopses on VFP11 if EX bit set */
+		fmxr(FPEXC, fpexc & ~FPEXC_EX);
 		vfp_save_state(&ti->vfpstate, fpexc);
 
 		/* disable, just in case */
 		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
 	} else if (vfp_current_hw_state[ti->cpu]) {
 #ifndef CONFIG_SMP
-		fmxr(FPEXC, fpexc | FPEXC_EN);
+		/* vfp_save_state oopses on VFP11 if EX bit set */
+		fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN);
 		vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc);
 		fmxr(FPEXC, fpexc);
 #endif
@@ -536,7 +542,8 @@ void vfp_sync_hwstate(struct thread_info *thread)
 		/*
 		 * Save the last VFP state on this CPU.
 		 */
-		fmxr(FPEXC, fpexc | FPEXC_EN);
+		/* vfp_save_state oopses on VFP11 if EX bit set */
+		fmxr(FPEXC, (fpexc & ~FPEXC_EX) | FPEXC_EN);
 		vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN);
 		fmxr(FPEXC, fpexc);
 	}
@@ -608,6 +615,7 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
 	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
 	unsigned long fpexc;
 	int err = 0;
+	u32 fpsid = fmrx(FPSID);
 
 	/* Disable VFP to avoid corrupting the new thread state. */
 	vfp_flush_hwstate(thread);
@@ -631,8 +639,12 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
 	/* Ensure the VFP is enabled. */
 	fpexc |= FPEXC_EN;
 
-	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
-	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
+	/* Mask FPXEC_EX and FPEXC_FP2V if not required by VFP arch */
+	if ((fpsid & FPSID_ARCH_MASK) != (1 << FPSID_ARCH_BIT)) {
+		/* Ensure FPINST2 is invalid and the exception flag is cleared. */
+		fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
+	}
+
 	hwstate->fpexc = fpexc;
 
 	__get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
@@ -702,7 +714,8 @@ void kernel_neon_begin(void)
 	cpu = get_cpu();
 
 	fpexc = fmrx(FPEXC) | FPEXC_EN;
-	fmxr(FPEXC, fpexc);
+	/* vfp_save_state oopses on VFP11 if EX bit set */
+	fmxr(FPEXC, fpexc & ~FPEXC_EX);	
 
 	/*
 	 * Save the userland NEON/VFP state. Under UP,

arch/arm/xen/enlighten.c

@@ -239,8 +239,7 @@ static int __init xen_guest_init(void)
 	 * for secondary CPUs as they are brought up.
 	 * For uniformity we use VCPUOP_register_vcpu_info even on cpu0.
 	 */
-	xen_vcpu_info = __alloc_percpu(sizeof(struct vcpu_info),
-			                       sizeof(struct vcpu_info));
+	xen_vcpu_info = alloc_percpu(struct vcpu_info);
 	if (xen_vcpu_info == NULL)
 		return -ENOMEM;
 

arch/arm64/crypto/aes-ce-ccm-core.S

@@ -9,6 +9,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 
 	.text
 	.arch	armv8-a+crypto
@@ -19,7 +20,7 @@
 	 */
 ENTRY(ce_aes_ccm_auth_data)
 	ldr	w8, [x3]			/* leftover from prev round? */
-	ld1	{v0.2d}, [x0]			/* load mac */
+	ld1	{v0.16b}, [x0]			/* load mac */
 	cbz	w8, 1f
 	sub	w8, w8, #16
 	eor	v1.16b, v1.16b, v1.16b
@@ -31,7 +32,7 @@ ENTRY(ce_aes_ccm_auth_data)
 	beq	8f				/* out of input? */
 	cbnz	w8, 0b
 	eor	v0.16b, v0.16b, v1.16b
-1:	ld1	{v3.2d}, [x4]			/* load first round key */
+1:	ld1	{v3.16b}, [x4]			/* load first round key */
 	prfm	pldl1strm, [x1]
 	cmp	w5, #12				/* which key size? */
 	add	x6, x4, #16
@@ -41,17 +42,17 @@ ENTRY(ce_aes_ccm_auth_data)
 	mov	v5.16b, v3.16b
 	b	4f
 2:	mov	v4.16b, v3.16b
-	ld1	{v5.2d}, [x6], #16		/* load 2nd round key */
+	ld1	{v5.16b}, [x6], #16		/* load 2nd round key */
 3:	aese	v0.16b, v4.16b
 	aesmc	v0.16b, v0.16b
-4:	ld1	{v3.2d}, [x6], #16		/* load next round key */
+4:	ld1	{v3.16b}, [x6], #16		/* load next round key */
 	aese	v0.16b, v5.16b
 	aesmc	v0.16b, v0.16b
-5:	ld1	{v4.2d}, [x6], #16		/* load next round key */
+5:	ld1	{v4.16b}, [x6], #16		/* load next round key */
 	subs	w7, w7, #3
 	aese	v0.16b, v3.16b
 	aesmc	v0.16b, v0.16b
-	ld1	{v5.2d}, [x6], #16		/* load next round key */
+	ld1	{v5.16b}, [x6], #16		/* load next round key */
 	bpl	3b
 	aese	v0.16b, v4.16b
 	subs	w2, w2, #16			/* last data? */
@@ -60,7 +61,7 @@ ENTRY(ce_aes_ccm_auth_data)
 	ld1	{v1.16b}, [x1], #16		/* load next input block */
 	eor	v0.16b, v0.16b, v1.16b		/* xor with mac */
 	bne	1b
-6:	st1	{v0.2d}, [x0]			/* store mac */
+6:	st1	{v0.16b}, [x0]			/* store mac */
 	beq	10f
 	adds	w2, w2, #16
 	beq	10f
@@ -79,7 +80,7 @@ ENTRY(ce_aes_ccm_auth_data)
 	adds	w7, w7, #1
 	bne	9b
 	eor	v0.16b, v0.16b, v1.16b
-	st1	{v0.2d}, [x0]
+	st1	{v0.16b}, [x0]
 10:	str	w8, [x3]
 	ret
 ENDPROC(ce_aes_ccm_auth_data)
@@ -89,27 +90,27 @@ ENDPROC(ce_aes_ccm_auth_data)
 	 * 			 u32 rounds);
 	 */
 ENTRY(ce_aes_ccm_final)
-	ld1	{v3.2d}, [x2], #16		/* load first round key */
-	ld1	{v0.2d}, [x0]			/* load mac */
+	ld1	{v3.16b}, [x2], #16		/* load first round key */
+	ld1	{v0.16b}, [x0]			/* load mac */
 	cmp	w3, #12				/* which key size? */
 	sub	w3, w3, #2			/* modified # of rounds */
-	ld1	{v1.2d}, [x1]			/* load 1st ctriv */
+	ld1	{v1.16b}, [x1]			/* load 1st ctriv */
 	bmi	0f
 	bne	3f
 	mov	v5.16b, v3.16b
 	b	2f
 0:	mov	v4.16b, v3.16b
-1:	ld1	{v5.2d}, [x2], #16		/* load next round key */
+1:	ld1	{v5.16b}, [x2], #16		/* load next round key */
 	aese	v0.16b, v4.16b
 	aesmc	v0.16b, v0.16b
 	aese	v1.16b, v4.16b
 	aesmc	v1.16b, v1.16b
-2:	ld1	{v3.2d}, [x2], #16		/* load next round key */
+2:	ld1	{v3.16b}, [x2], #16		/* load next round key */
 	aese	v0.16b, v5.16b
 	aesmc	v0.16b, v0.16b
 	aese	v1.16b, v5.16b
 	aesmc	v1.16b, v1.16b
-3:	ld1	{v4.2d}, [x2], #16		/* load next round key */
+3:	ld1	{v4.16b}, [x2], #16		/* load next round key */
 	subs	w3, w3, #3
 	aese	v0.16b, v3.16b
 	aesmc	v0.16b, v0.16b
@@ -120,47 +121,47 @@ ENTRY(ce_aes_ccm_final)
 	aese	v1.16b, v4.16b
 	/* final round key cancels out */
 	eor	v0.16b, v0.16b, v1.16b		/* en-/decrypt the mac */
-	st1	{v0.2d}, [x0]			/* store result */
+	st1	{v0.16b}, [x0]			/* store result */
 	ret
 ENDPROC(ce_aes_ccm_final)
 
 	.macro	aes_ccm_do_crypt,enc
 	ldr	x8, [x6, #8]			/* load lower ctr */
-	ld1	{v0.2d}, [x5]			/* load mac */
-	rev	x8, x8				/* keep swabbed ctr in reg */
+	ld1	{v0.16b}, [x5]			/* load mac */
+CPU_LE(	rev	x8, x8			)	/* keep swabbed ctr in reg */
 0:	/* outer loop */
-	ld1	{v1.1d}, [x6]			/* load upper ctr */
+	ld1	{v1.8b}, [x6]			/* load upper ctr */
 	prfm	pldl1strm, [x1]
 	add	x8, x8, #1
 	rev	x9, x8
 	cmp	w4, #12				/* which key size? */
 	sub	w7, w4, #2			/* get modified # of rounds */
 	ins	v1.d[1], x9			/* no carry in lower ctr */
-	ld1	{v3.2d}, [x3]			/* load first round key */
+	ld1	{v3.16b}, [x3]			/* load first round key */
 	add	x10, x3, #16
 	bmi	1f
 	bne	4f
 	mov	v5.16b, v3.16b
 	b	3f
 1:	mov	v4.16b, v3.16b
-	ld1	{v5.2d}, [x10], #16		/* load 2nd round key */
+	ld1	{v5.16b}, [x10], #16		/* load 2nd round key */
 2:	/* inner loop: 3 rounds, 2x interleaved */
 	aese	v0.16b, v4.16b
 	aesmc	v0.16b, v0.16b
 	aese	v1.16b, v4.16b
 	aesmc	v1.16b, v1.16b
-3:	ld1	{v3.2d}, [x10], #16		/* load next round key */
+3:	ld1	{v3.16b}, [x10], #16		/* load next round key */
 	aese	v0.16b, v5.16b
 	aesmc	v0.16b, v0.16b
 	aese	v1.16b, v5.16b
 	aesmc	v1.16b, v1.16b
-4:	ld1	{v4.2d}, [x10], #16		/* load next round key */
+4:	ld1	{v4.16b}, [x10], #16		/* load next round key */
 	subs	w7, w7, #3
 	aese	v0.16b, v3.16b
 	aesmc	v0.16b, v0.16b
 	aese	v1.16b, v3.16b
 	aesmc	v1.16b, v1.16b
-	ld1	{v5.2d}, [x10], #16		/* load next round key */
+	ld1	{v5.16b}, [x10], #16		/* load next round key */
 	bpl	2b
 	aese	v0.16b, v4.16b
 	aese	v1.16b, v4.16b
@@ -177,14 +178,14 @@ ENDPROC(ce_aes_ccm_final)
 	eor	v0.16b, v0.16b, v2.16b		/* xor mac with pt ^ rk[last] */
 	st1	{v1.16b}, [x0], #16		/* write output block */
 	bne	0b
-	rev	x8, x8
-	st1	{v0.2d}, [x5]			/* store mac */
+CPU_LE(	rev	x8, x8			)
+	st1	{v0.16b}, [x5]			/* store mac */
 	str	x8, [x6, #8]			/* store lsb end of ctr (BE) */
 5:	ret
 
 6:	eor	v0.16b, v0.16b, v5.16b		/* final round mac */
 	eor	v1.16b, v1.16b, v5.16b		/* final round enc */
-	st1	{v0.2d}, [x5]			/* store mac */
+	st1	{v0.16b}, [x5]			/* store mac */
 	add	w2, w2, #16			/* process partial tail block */
 7:	ldrb	w9, [x1], #1			/* get 1 byte of input */
 	umov	w6, v1.b[0]			/* get top crypted ctr byte */

arch/arm64/crypto/aes-ce-cipher.c

@@ -47,24 +47,24 @@ static void aes_cipher_encrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
 	kernel_neon_begin_partial(4);
 
 	__asm__("	ld1	{v0.16b}, %[in]			;"
-		"	ld1	{v1.2d}, [%[key]], #16		;"
+		"	ld1	{v1.16b}, [%[key]], #16		;"
 		"	cmp	%w[rounds], #10			;"
 		"	bmi	0f				;"
 		"	bne	3f				;"
 		"	mov	v3.16b, v1.16b			;"
 		"	b	2f				;"
 		"0:	mov	v2.16b, v1.16b			;"
-		"	ld1	{v3.2d}, [%[key]], #16		;"
+		"	ld1	{v3.16b}, [%[key]], #16		;"
 		"1:	aese	v0.16b, v2.16b			;"
 		"	aesmc	v0.16b, v0.16b			;"
-		"2:	ld1	{v1.2d}, [%[key]], #16		;"
+		"2:	ld1	{v1.16b}, [%[key]], #16		;"
 		"	aese	v0.16b, v3.16b			;"
 		"	aesmc	v0.16b, v0.16b			;"
-		"3:	ld1	{v2.2d}, [%[key]], #16		;"
+		"3:	ld1	{v2.16b}, [%[key]], #16		;"
 		"	subs	%w[rounds], %w[rounds], #3	;"
 		"	aese	v0.16b, v1.16b			;"
 		"	aesmc	v0.16b, v0.16b			;"
-		"	ld1	{v3.2d}, [%[key]], #16		;"
+		"	ld1	{v3.16b}, [%[key]], #16		;"
 		"	bpl	1b				;"
 		"	aese	v0.16b, v2.16b			;"
 		"	eor	v0.16b, v0.16b, v3.16b		;"
@@ -92,24 +92,24 @@ static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
 	kernel_neon_begin_partial(4);
 
 	__asm__("	ld1	{v0.16b}, %[in]			;"
-		"	ld1	{v1.2d}, [%[key]], #16		;"
+		"	ld1	{v1.16b}, [%[key]], #16		;"
 		"	cmp	%w[rounds], #10			;"
 		"	bmi	0f				;"
 		"	bne	3f				;"
 		"	mov	v3.16b, v1.16b			;"
 		"	b	2f				;"
 		"0:	mov	v2.16b, v1.16b			;"
-		"	ld1	{v3.2d}, [%[key]], #16		;"
+		"	ld1	{v3.16b}, [%[key]], #16		;"
 		"1:	aesd	v0.16b, v2.16b			;"
 		"	aesimc	v0.16b, v0.16b			;"
-		"2:	ld1	{v1.2d}, [%[key]], #16		;"
+		"2:	ld1	{v1.16b}, [%[key]], #16		;"
 		"	aesd	v0.16b, v3.16b			;"
 		"	aesimc	v0.16b, v0.16b			;"
-		"3:	ld1	{v2.2d}, [%[key]], #16		;"
+		"3:	ld1	{v2.16b}, [%[key]], #16		;"
 		"	subs	%w[rounds], %w[rounds], #3	;"
 		"	aesd	v0.16b, v1.16b			;"
 		"	aesimc	v0.16b, v0.16b			;"
-		"	ld1	{v3.2d}, [%[key]], #16		;"
+		"	ld1	{v3.16b}, [%[key]], #16		;"
 		"	bpl	1b				;"
 		"	aesd	v0.16b, v2.16b			;"
 		"	eor	v0.16b, v0.16b, v3.16b		;"
@@ -173,7 +173,12 @@ int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
 		u32 *rki = ctx->key_enc + (i * kwords);
 		u32 *rko = rki + kwords;
 
+#ifndef CONFIG_CPU_BIG_ENDIAN
 		rko[0] = ror32(aes_sub(rki[kwords - 1]), 8) ^ rcon[i] ^ rki[0];
+#else
+		rko[0] = rol32(aes_sub(rki[kwords - 1]), 8) ^ (rcon[i] << 24) ^
+			 rki[0];
+#endif
 		rko[1] = rko[0] ^ rki[1];
 		rko[2] = rko[1] ^ rki[2];
 		rko[3] = rko[2] ^ rki[3];

arch/arm64/crypto/aes-ce.S

@@ -10,6 +10,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 
 #define AES_ENTRY(func)		ENTRY(ce_ ## func)
 #define AES_ENDPROC(func)	ENDPROC(ce_ ## func)

arch/arm64/crypto/aes-glue.c

@@ -211,7 +211,7 @@ static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		err = blkcipher_walk_done(desc, &walk,
 					  walk.nbytes % AES_BLOCK_SIZE);
 	}
-	if (nbytes) {
+	if (walk.nbytes % AES_BLOCK_SIZE) {
 		u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 __aligned(8) tail[AES_BLOCK_SIZE];

arch/arm64/crypto/aes-modes.S

@@ -193,15 +193,16 @@ AES_ENTRY(aes_cbc_encrypt)
 	cbz		w6, .Lcbcencloop
 
 	ld1		{v0.16b}, [x5]			/* get iv */
-	enc_prepare	w3, x2, x5
+	enc_prepare	w3, x2, x6
 
 .Lcbcencloop:
 	ld1		{v1.16b}, [x1], #16		/* get next pt block */
 	eor		v0.16b, v0.16b, v1.16b		/* ..and xor with iv */
-	encrypt_block	v0, w3, x2, x5, w6
+	encrypt_block	v0, w3, x2, x6, w7
 	st1		{v0.16b}, [x0], #16
 	subs		w4, w4, #1
 	bne		.Lcbcencloop
+	st1		{v0.16b}, [x5]			/* return iv */
 	ret
 AES_ENDPROC(aes_cbc_encrypt)
 
@@ -211,7 +212,7 @@ AES_ENTRY(aes_cbc_decrypt)
 	cbz		w6, .LcbcdecloopNx
 
 	ld1		{v7.16b}, [x5]			/* get iv */
-	dec_prepare	w3, x2, x5
+	dec_prepare	w3, x2, x6
 
 .LcbcdecloopNx:
 #if INTERLEAVE >= 2
@@ -248,7 +249,7 @@ AES_ENTRY(aes_cbc_decrypt)
 .Lcbcdecloop:
 	ld1		{v1.16b}, [x1], #16		/* get next ct block */
 	mov		v0.16b, v1.16b			/* ...and copy to v0 */
-	decrypt_block	v0, w3, x2, x5, w6
+	decrypt_block	v0, w3, x2, x6, w7
 	eor		v0.16b, v0.16b, v7.16b		/* xor with iv => pt */
 	mov		v7.16b, v1.16b			/* ct is next iv */
 	st1		{v0.16b}, [x0], #16
@@ -256,6 +257,7 @@ AES_ENTRY(aes_cbc_decrypt)
 	bne		.Lcbcdecloop
 .Lcbcdecout:
 	FRAME_POP
+	st1		{v7.16b}, [x5]			/* return iv */
 	ret
 AES_ENDPROC(aes_cbc_decrypt)
 
@@ -267,24 +269,15 @@ AES_ENDPROC(aes_cbc_decrypt)
 
 AES_ENTRY(aes_ctr_encrypt)
 	FRAME_PUSH
-	cbnz		w6, .Lctrfirst		/* 1st time around? */
-	umov		x5, v4.d[1]		/* keep swabbed ctr in reg */
-	rev		x5, x5
-#if INTERLEAVE >= 2
-	cmn		w5, w4			/* 32 bit overflow? */
-	bcs		.Lctrinc
-	add		x5, x5, #1		/* increment BE ctr */
-	b		.LctrincNx
-#else
-	b		.Lctrinc
-#endif
-.Lctrfirst:
+	cbz		w6, .Lctrnotfirst	/* 1st time around? */
 	enc_prepare	w3, x2, x6
 	ld1		{v4.16b}, [x5]
-	umov		x5, v4.d[1]		/* keep swabbed ctr in reg */
-	rev		x5, x5
+
+.Lctrnotfirst:
+	umov		x8, v4.d[1]		/* keep swabbed ctr in reg */
+	rev		x8, x8
 #if INTERLEAVE >= 2
-	cmn		w5, w4			/* 32 bit overflow? */
+	cmn		w8, w4			/* 32 bit overflow? */
 	bcs		.Lctrloop
 .LctrloopNx:
 	subs		w4, w4, #INTERLEAVE
@@ -292,11 +285,11 @@ AES_ENTRY(aes_ctr_encrypt)
 #if INTERLEAVE == 2
 	mov		v0.8b, v4.8b
 	mov		v1.8b, v4.8b
-	rev		x7, x5
-	add		x5, x5, #1
+	rev		x7, x8
+	add		x8, x8, #1
 	ins		v0.d[1], x7
-	rev		x7, x5
-	add		x5, x5, #1
+	rev		x7, x8
+	add		x8, x8, #1
 	ins		v1.d[1], x7
 	ld1		{v2.16b-v3.16b}, [x1], #32	/* get 2 input blocks */
 	do_encrypt_block2x
@@ -305,7 +298,7 @@ AES_ENTRY(aes_ctr_encrypt)
 	st1		{v0.16b-v1.16b}, [x0], #32
 #else
 	ldr		q8, =0x30000000200000001	/* addends 1,2,3[,0] */
-	dup		v7.4s, w5
+	dup		v7.4s, w8
 	mov		v0.16b, v4.16b
 	add		v7.4s, v7.4s, v8.4s
 	mov		v1.16b, v4.16b
@@ -323,18 +316,12 @@ AES_ENTRY(aes_ctr_encrypt)
 	eor		v2.16b, v7.16b, v2.16b
 	eor		v3.16b, v5.16b, v3.16b
 	st1		{v0.16b-v3.16b}, [x0], #64
-	add		x5, x5, #INTERLEAVE
+	add		x8, x8, #INTERLEAVE
 #endif
-	cbz		w4, .LctroutNx
-.LctrincNx:
-	rev		x7, x5
+	rev		x7, x8
 	ins		v4.d[1], x7
+	cbz		w4, .Lctrout
 	b		.LctrloopNx
-.LctroutNx:
-	sub		x5, x5, #1
-	rev		x7, x5
-	ins		v4.d[1], x7
-	b		.Lctrout
 .Lctr1x:
 	adds		w4, w4, #INTERLEAVE
 	beq		.Lctrout
@@ -342,30 +329,39 @@ AES_ENTRY(aes_ctr_encrypt)
 .Lctrloop:
 	mov		v0.16b, v4.16b
 	encrypt_block	v0, w3, x2, x6, w7
+
+	adds		x8, x8, #1		/* increment BE ctr */
+	rev		x7, x8
+	ins		v4.d[1], x7
+	bcs		.Lctrcarry		/* overflow? */
+
+.Lctrcarrydone:
 	subs		w4, w4, #1
 	bmi		.Lctrhalfblock		/* blocks < 0 means 1/2 block */
 	ld1		{v3.16b}, [x1], #16
 	eor		v3.16b, v0.16b, v3.16b
 	st1		{v3.16b}, [x0], #16
-	beq		.Lctrout
-.Lctrinc:
-	adds		x5, x5, #1		/* increment BE ctr */
-	rev		x7, x5
-	ins		v4.d[1], x7
-	bcc		.Lctrloop		/* no overflow? */
+	bne		.Lctrloop
+
+.Lctrout:
+	st1		{v4.16b}, [x5]		/* return next CTR value */
+	FRAME_POP
+	ret
+
+.Lctrhalfblock:
+	ld1		{v3.8b}, [x1]
+	eor		v3.8b, v0.8b, v3.8b
+	st1		{v3.8b}, [x0]
+	FRAME_POP
+	ret
+
+.Lctrcarry:
 	umov		x7, v4.d[0]		/* load upper word of ctr  */
 	rev		x7, x7			/* ... to handle the carry */
 	add		x7, x7, #1
 	rev		x7, x7
 	ins		v4.d[0], x7
-	b		.Lctrloop
-.Lctrhalfblock:
-	ld1		{v3.8b}, [x1]
-	eor		v3.8b, v0.8b, v3.8b
-	st1		{v3.8b}, [x0]
-.Lctrout:
-	FRAME_POP
-	ret
+	b		.Lctrcarrydone
 AES_ENDPROC(aes_ctr_encrypt)
 	.ltorg
 
@@ -386,7 +382,8 @@ AES_ENDPROC(aes_ctr_encrypt)
 	.endm
 
 .Lxts_mul_x:
-	.word		1, 0, 0x87, 0
+CPU_LE(	.quad		1, 0x87		)
+CPU_BE(	.quad		0x87, 1		)
 
 AES_ENTRY(aes_xts_encrypt)
 	FRAME_PUSH

arch/arm64/crypto/aes-neon.S

@@ -9,6 +9,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 
 #define AES_ENTRY(func)		ENTRY(neon_ ## func)
 #define AES_ENDPROC(func)	ENDPROC(neon_ ## func)
@@ -83,13 +84,13 @@
 	.endm
 
 	.macro		do_block, enc, in, rounds, rk, rkp, i
-	ld1		{v15.16b}, [\rk]
+	ld1		{v15.4s}, [\rk]
 	add		\rkp, \rk, #16
 	mov		\i, \rounds
 1111:	eor		\in\().16b, \in\().16b, v15.16b		/* ^round key */
 	tbl		\in\().16b, {\in\().16b}, v13.16b	/* ShiftRows */
 	sub_bytes	\in
-	ld1		{v15.16b}, [\rkp], #16
+	ld1		{v15.4s}, [\rkp], #16
 	subs		\i, \i, #1
 	beq		2222f
 	.if		\enc == 1
@@ -229,7 +230,7 @@
 	.endm
 
 	.macro		do_block_2x, enc, in0, in1 rounds, rk, rkp, i
-	ld1		{v15.16b}, [\rk]
+	ld1		{v15.4s}, [\rk]
 	add		\rkp, \rk, #16
 	mov		\i, \rounds
 1111:	eor		\in0\().16b, \in0\().16b, v15.16b	/* ^round key */
@@ -237,7 +238,7 @@
 	sub_bytes_2x	\in0, \in1
 	tbl		\in0\().16b, {\in0\().16b}, v13.16b	/* ShiftRows */
 	tbl		\in1\().16b, {\in1\().16b}, v13.16b	/* ShiftRows */
-	ld1		{v15.16b}, [\rkp], #16
+	ld1		{v15.4s}, [\rkp], #16
 	subs		\i, \i, #1
 	beq		2222f
 	.if		\enc == 1
@@ -254,7 +255,7 @@
 	.endm
 
 	.macro		do_block_4x, enc, in0, in1, in2, in3, rounds, rk, rkp, i
-	ld1		{v15.16b}, [\rk]
+	ld1		{v15.4s}, [\rk]
 	add		\rkp, \rk, #16
 	mov		\i, \rounds
 1111:	eor		\in0\().16b, \in0\().16b, v15.16b	/* ^round key */
@@ -266,7 +267,7 @@
 	tbl		\in1\().16b, {\in1\().16b}, v13.16b	/* ShiftRows */
 	tbl		\in2\().16b, {\in2\().16b}, v13.16b	/* ShiftRows */
 	tbl		\in3\().16b, {\in3\().16b}, v13.16b	/* ShiftRows */
-	ld1		{v15.16b}, [\rkp], #16
+	ld1		{v15.4s}, [\rkp], #16
 	subs		\i, \i, #1
 	beq		2222f
 	.if		\enc == 1
@@ -306,12 +307,16 @@
 	.text
 	.align		4
 .LForward_ShiftRows:
-	.byte		0x0, 0x5, 0xa, 0xf, 0x4, 0x9, 0xe, 0x3
-	.byte		0x8, 0xd, 0x2, 0x7, 0xc, 0x1, 0x6, 0xb
+CPU_LE(	.byte		0x0, 0x5, 0xa, 0xf, 0x4, 0x9, 0xe, 0x3	)
+CPU_LE(	.byte		0x8, 0xd, 0x2, 0x7, 0xc, 0x1, 0x6, 0xb	)
+CPU_BE(	.byte		0xb, 0x6, 0x1, 0xc, 0x7, 0x2, 0xd, 0x8	)
+CPU_BE(	.byte		0x3, 0xe, 0x9, 0x4, 0xf, 0xa, 0x5, 0x0	)
 
 .LReverse_ShiftRows:
-	.byte		0x0, 0xd, 0xa, 0x7, 0x4, 0x1, 0xe, 0xb
-	.byte		0x8, 0x5, 0x2, 0xf, 0xc, 0x9, 0x6, 0x3
+CPU_LE(	.byte		0x0, 0xd, 0xa, 0x7, 0x4, 0x1, 0xe, 0xb	)
+CPU_LE(	.byte		0x8, 0x5, 0x2, 0xf, 0xc, 0x9, 0x6, 0x3	)
+CPU_BE(	.byte		0x3, 0x6, 0x9, 0xc, 0xf, 0x2, 0x5, 0x8	)
+CPU_BE(	.byte		0xb, 0xe, 0x1, 0x4, 0x7, 0xa, 0xd, 0x0	)
 
 .LForward_Sbox:
 	.byte		0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5

arch/arm64/crypto/ghash-ce-core.S

@@ -29,8 +29,8 @@
 	 *			   struct ghash_key const *k, const char *head)
 	 */
 ENTRY(pmull_ghash_update)
-	ld1		{SHASH.16b}, [x3]
-	ld1		{XL.16b}, [x1]
+	ld1		{SHASH.2d}, [x3]
+	ld1		{XL.2d}, [x1]
 	movi		MASK.16b, #0xe1
 	ext		SHASH2.16b, SHASH.16b, SHASH.16b, #8
 	shl		MASK.2d, MASK.2d, #57
@@ -74,6 +74,6 @@ CPU_LE(	rev64		T1.16b, T1.16b	)
 
 	cbnz		w0, 0b
 
-	st1		{XL.16b}, [x1]
+	st1		{XL.2d}, [x1]
 	ret
 ENDPROC(pmull_ghash_update)

arch/arm64/crypto/sha1-ce-core.S

@@ -78,7 +78,7 @@ ENTRY(sha1_ce_transform)
 	ld1r		{k3.4s}, [x6]
 
 	/* load state */
-	ldr		dga, [x0]
+	ld1		{dgav.4s}, [x0]
 	ldr		dgb, [x0, #16]
 
 	/* load sha1_ce_state::finalize */
@@ -144,7 +144,7 @@ CPU_LE(	rev32		v11.16b, v11.16b	)
 	b		1b
 
 	/* store new state */
-3:	str		dga, [x0]
+3:	st1		{dgav.4s}, [x0]
 	str		dgb, [x0, #16]
 	ret
 ENDPROC(sha1_ce_transform)

arch/arm64/crypto/sha2-ce-core.S

@@ -85,7 +85,7 @@ ENTRY(sha2_ce_transform)
 	ld1		{v12.4s-v15.4s}, [x8]
 
 	/* load state */
-	ldp		dga, dgb, [x0]
+	ld1		{dgav.4s, dgbv.4s}, [x0]
 
 	/* load sha256_ce_state::finalize */
 	ldr		w4, [x0, #:lo12:sha256_ce_offsetof_finalize]
@@ -148,6 +148,6 @@ CPU_LE(	rev32		v19.16b, v19.16b	)
 	b		1b
 
 	/* store new state */
-3:	stp		dga, dgb, [x0]
+3:	st1		{dgav.4s, dgbv.4s}, [x0]
 	ret
 ENDPROC(sha2_ce_transform)

arch/arm64/include/asm/cpufeature.h

@@ -77,7 +77,7 @@ struct arm64_cpu_capabilities {
 	const char *desc;
 	u16 capability;
 	bool (*matches)(const struct arm64_cpu_capabilities *);
-	void (*enable)(void *);		/* Called on all active CPUs */
+	int (*enable)(void *);		/* Called on all active CPUs */
 	union {
 		struct {	/* To be used for erratum handling only */
 			u32 midr_model;

arch/arm64/include/asm/futex.h

@@ -121,6 +121,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;
 
 	asm volatile("// futex_atomic_cmpxchg_inatomic\n"
+ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
 "	prfm	pstl1strm, %2\n"
 "1:	ldxr	%w1, %2\n"
 "	sub	%w3, %w1, %w4\n"
@@ -137,6 +138,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 "	.align	3\n"
 "	.quad	1b, 4b, 2b, 4b\n"
 "	.popsection\n"
+ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
 	: "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp)
 	: "r" (oldval), "r" (newval), "Ir" (-EFAULT)
 	: "memory");

arch/arm64/include/asm/percpu.h

@@ -44,48 +44,44 @@ static inline unsigned long __percpu_##op(void *ptr,			\
 									\
 	switch (size) {							\
 	case 1:								\
-		do {							\
-			asm ("//__per_cpu_" #op "_1\n"			\
-			"ldxrb	  %w[ret], %[ptr]\n"			\
+		asm ("//__per_cpu_" #op "_1\n"				\
+		"1:	ldxrb	  %w[ret], %[ptr]\n"			\
 			#asm_op " %w[ret], %w[ret], %w[val]\n"		\
-			"stxrb	  %w[loop], %w[ret], %[ptr]\n"		\
-			: [loop] "=&r" (loop), [ret] "=&r" (ret),	\
-			  [ptr] "+Q"(*(u8 *)ptr)			\
-			: [val] "Ir" (val));				\
-		} while (loop);						\
+		"	stxrb	  %w[loop], %w[ret], %[ptr]\n"		\
+		"	cbnz	  %w[loop], 1b"				\
+		: [loop] "=&r" (loop), [ret] "=&r" (ret),		\
+		  [ptr] "+Q"(*(u8 *)ptr)				\
+		: [val] "Ir" (val));					\
 		break;							\
 	case 2:								\
-		do {							\
-			asm ("//__per_cpu_" #op "_2\n"			\
-			"ldxrh	  %w[ret], %[ptr]\n"			\
+		asm ("//__per_cpu_" #op "_2\n"				\
+		"1:	ldxrh	  %w[ret], %[ptr]\n"			\
 			#asm_op " %w[ret], %w[ret], %w[val]\n"		\
-			"stxrh	  %w[loop], %w[ret], %[ptr]\n"		\
-			: [loop] "=&r" (loop), [ret] "=&r" (ret),	\
-			  [ptr]  "+Q"(*(u16 *)ptr)			\
-			: [val] "Ir" (val));				\
-		} while (loop);						\
+		"	stxrh	  %w[loop], %w[ret], %[ptr]\n"		\
+		"	cbnz	  %w[loop], 1b"				\
+		: [loop] "=&r" (loop), [ret] "=&r" (ret),		\
+		  [ptr]  "+Q"(*(u16 *)ptr)				\
+		: [val] "Ir" (val));					\
 		break;							\
 	case 4:								\
-		do {							\
-			asm ("//__per_cpu_" #op "_4\n"			\
-			"ldxr	  %w[ret], %[ptr]\n"			\
+		asm ("//__per_cpu_" #op "_4\n"				\
+		"1:	ldxr	  %w[ret], %[ptr]\n"			\
 			#asm_op " %w[ret], %w[ret], %w[val]\n"		\
-			"stxr	  %w[loop], %w[ret], %[ptr]\n"		\
-			: [loop] "=&r" (loop), [ret] "=&r" (ret),	\
-			  [ptr] "+Q"(*(u32 *)ptr)			\
-			: [val] "Ir" (val));				\
-		} while (loop);						\
+		"	stxr	  %w[loop], %w[ret], %[ptr]\n"		\
+		"	cbnz	  %w[loop], 1b"				\
+		: [loop] "=&r" (loop), [ret] "=&r" (ret),		\
+		  [ptr] "+Q"(*(u32 *)ptr)				\
+		: [val] "Ir" (val));					\
 		break;							\
 	case 8:								\
-		do {							\
-			asm ("//__per_cpu_" #op "_8\n"			\
-			"ldxr	  %[ret], %[ptr]\n"			\
+		asm ("//__per_cpu_" #op "_8\n"				\
+		"1:	ldxr	  %[ret], %[ptr]\n"			\
 			#asm_op " %[ret], %[ret], %[val]\n"		\
-			"stxr	  %w[loop], %[ret], %[ptr]\n"		\
-			: [loop] "=&r" (loop), [ret] "=&r" (ret),	\
-			  [ptr] "+Q"(*(u64 *)ptr)			\
-			: [val] "Ir" (val));				\
-		} while (loop);						\
+		"	stxr	  %w[loop], %[ret], %[ptr]\n"		\
+		"	cbnz	  %w[loop], 1b"				\
+		: [loop] "=&r" (loop), [ret] "=&r" (ret),		\
+		  [ptr] "+Q"(*(u64 *)ptr)				\
+		: [val] "Ir" (val));					\
 		break;							\
 	default:							\
 		BUILD_BUG();						\
@@ -150,44 +146,40 @@ static inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
 
 	switch (size) {
 	case 1:
-		do {
-			asm ("//__percpu_xchg_1\n"
-			"ldxrb %w[ret], %[ptr]\n"
-			"stxrb %w[loop], %w[val], %[ptr]\n"
-			: [loop] "=&r"(loop), [ret] "=&r"(ret),
-			  [ptr] "+Q"(*(u8 *)ptr)
-			: [val] "r" (val));
-		} while (loop);
+		asm ("//__percpu_xchg_1\n"
+		"1:	ldxrb	%w[ret], %[ptr]\n"
+		"	stxrb	%w[loop], %w[val], %[ptr]\n"
+		"	cbnz	%w[loop], 1b"
+		: [loop] "=&r"(loop), [ret] "=&r"(ret),
+		  [ptr] "+Q"(*(u8 *)ptr)
+		: [val] "r" (val));
 		break;
 	case 2:
-		do {
-			asm ("//__percpu_xchg_2\n"
-			"ldxrh %w[ret], %[ptr]\n"
-			"stxrh %w[loop], %w[val], %[ptr]\n"
-			: [loop] "=&r"(loop), [ret] "=&r"(ret),
-			  [ptr] "+Q"(*(u16 *)ptr)
-			: [val] "r" (val));
-		} while (loop);
+		asm ("//__percpu_xchg_2\n"
+		"1:	ldxrh	%w[ret], %[ptr]\n"
+		"	stxrh	%w[loop], %w[val], %[ptr]\n"
+		"	cbnz	%w[loop], 1b"
+		: [loop] "=&r"(loop), [ret] "=&r"(ret),
+		  [ptr] "+Q"(*(u16 *)ptr)
+		: [val] "r" (val));
 		break;
 	case 4:
-		do {
-			asm ("//__percpu_xchg_4\n"
-			"ldxr %w[ret], %[ptr]\n"
-			"stxr %w[loop], %w[val], %[ptr]\n"
-			: [loop] "=&r"(loop), [ret] "=&r"(ret),
-			  [ptr] "+Q"(*(u32 *)ptr)
-			: [val] "r" (val));
-		} while (loop);
+		asm ("//__percpu_xchg_4\n"
+		"1:	ldxr	%w[ret], %[ptr]\n"
+		"	stxr	%w[loop], %w[val], %[ptr]\n"
+		"	cbnz	%w[loop], 1b"
+		: [loop] "=&r"(loop), [ret] "=&r"(ret),
+		  [ptr] "+Q"(*(u32 *)ptr)
+		: [val] "r" (val));
 		break;
 	case 8:
-		do {
-			asm ("//__percpu_xchg_8\n"
-			"ldxr %[ret], %[ptr]\n"
-			"stxr %w[loop], %[val], %[ptr]\n"
-			: [loop] "=&r"(loop), [ret] "=&r"(ret),
-			  [ptr] "+Q"(*(u64 *)ptr)
-			: [val] "r" (val));
-		} while (loop);
+		asm ("//__percpu_xchg_8\n"
+		"1:	ldxr	%[ret], %[ptr]\n"
+		"	stxr	%w[loop], %[val], %[ptr]\n"
+		"	cbnz	%w[loop], 1b"
+		: [loop] "=&r"(loop), [ret] "=&r"(ret),
+		  [ptr] "+Q"(*(u64 *)ptr)
+		: [val] "r" (val));
 		break;
 	default:
 		BUILD_BUG();

arch/arm64/include/asm/processor.h

@@ -186,6 +186,6 @@ static inline void spin_lock_prefetch(const void *x)
 
 #endif
 
-void cpu_enable_pan(void *__unused);
+int cpu_enable_pan(void *__unused);
 
 #endif /* __ASM_PROCESSOR_H */

arch/arm64/include/asm/spinlock.h

@@ -312,4 +312,14 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 #define arch_read_relax(lock)	cpu_relax()
 #define arch_write_relax(lock)	cpu_relax()
 
+/*
+ * Accesses appearing in program order before a spin_lock() operation
+ * can be reordered with accesses inside the critical section, by virtue
+ * of arch_spin_lock being constructed using acquire semantics.
+ *
+ * In cases where this is problematic (e.g. try_to_wake_up), an
+ * smp_mb__before_spinlock() can restore the required ordering.
+ */
+#define smp_mb__before_spinlock()	smp_mb()
+
 #endif /* __ASM_SPINLOCK_H */

arch/arm64/include/uapi/asm/ptrace.h

@@ -76,6 +76,7 @@ struct user_fpsimd_state {
 	__uint128_t	vregs[32];
 	__u32		fpsr;
 	__u32		fpcr;
+	__u32		__reserved[2];
 };
 
 struct user_hwdebug_state {

arch/arm64/kernel/cpufeature.c

@@ -19,7 +19,9 @@
 #define pr_fmt(fmt) "CPU features: " fmt
 
 #include <linux/bsearch.h>
+#include <linux/cpumask.h>
 #include <linux/sort.h>
+#include <linux/stop_machine.h>
 #include <linux/types.h>
 #include <asm/cpu.h>
 #include <asm/cpufeature.h>
@@ -764,7 +766,13 @@ static void enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps)
 
 	for (i = 0; caps[i].desc; i++)
 		if (caps[i].enable && cpus_have_cap(caps[i].capability))
-			on_each_cpu(caps[i].enable, NULL, true);
+			/*
+			 * Use stop_machine() as it schedules the work allowing
+			 * us to modify PSTATE, instead of on_each_cpu() which
+			 * uses an IPI, giving us a PSTATE that disappears when
+			 * we return.
+			 */
+			stop_machine(caps[i].enable, NULL, cpu_online_mask);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm64/kernel/debug-monitors.c

@@ -422,8 +422,10 @@ int kernel_active_single_step(void)
 /* ptrace API */
 void user_enable_single_step(struct task_struct *task)
 {
-	set_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP);
-	set_regs_spsr_ss(task_pt_regs(task));
+	struct thread_info *ti = task_thread_info(task);
+
+	if (!test_and_set_ti_thread_flag(ti, TIF_SINGLESTEP))
+		set_regs_spsr_ss(task_pt_regs(task));
 }
 
 void user_disable_single_step(struct task_struct *task)

arch/arm64/kernel/entry.S

@@ -562,7 +562,7 @@ el0_inv:
 	mov	x0, sp
 	mov	x1, #BAD_SYNC
 	mov	x2, x25
-	bl	bad_mode
+	bl	bad_el0_sync
 	b	ret_to_user
 ENDPROC(el0_sync)