OV9281 appears to drop the clock to LP mode between frames, but
the overlay didn't define this at both ends of the CSI2 link.
The overlay also had an incorrect link frequency defined, not that
the driver ever checked for one.
Fix both issues.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Commit "4e52889 media: atmel: atmel-isc-base: expose white
balance as v4l2 controls" in the upstream kernels reserves
(V4L2_CID_USER_BASE + 0x10c0) for use by the Atmel ISC,
therefore we have a control collision with our existing
define for V4L2_CID_USER_BCM2835_ISP_BASE.
Update V4L2_CID_USER_BCM2835_ISP_BASE to + 0x10e0 as the
next available block.
NB ABI breakage for libcamera (the only user of these controls).
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
commit 45cb6653b0 upstream.
Return -EINVAL for authenc(hmac(sha1),cbc(aes)),
authenc(hmac(sha256),cbc(aes)) and authenc(hmac(sha512),cbc(aes))
if the cipher length is not multiple of the AES block.
This is to prevent an undefined device behaviour.
Fixes: d370cec321 ("crypto: qat - Intel(R) QAT crypto interface")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dominik Przychodni <dominik.przychodni@intel.com>
[giovanni.cabiddu@intel.com: reworded commit message]
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10a2f0b311 upstream.
The setkey function for GCM/CCM algorithms didn't verify the key
length before copying the key and subtracting the salt length.
This patch delays the copying of the key til after the verification
has been done. It also adds checks on the key length to ensure
that it's at least as long as the salt.
Fixes: 9d12ba86f8 ("crypto: brcm - Add Broadcom SPU driver")
Cc: <stable@vger.kernel.org>
Reported-by: kiyin(尹亮) <kiyin@tencent.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0891fb39ba upstream.
Since commit c330fb1ddc ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.")
Xen is using the chip_data pointer for storing IRQ specific data. When
running as a HVM domain this can result in problems for legacy IRQs, as
those might use chip_data for their own purposes.
Use a local array for this purpose in case of legacy IRQs, avoiding the
double use.
Cc: stable@vger.kernel.org
Fixes: c330fb1ddc ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Stefan Bader <stefan.bader@canonical.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200930091614.13660-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2bb80b8bd upstream.
With suitably crafted reiserfs image and mount command reiserfs will
crash when trying to verify that XATTR_ROOT directory can be looked up
in / as that recurses back to xattr code like:
xattr_lookup+0x24/0x280 fs/reiserfs/xattr.c:395
reiserfs_xattr_get+0x89/0x540 fs/reiserfs/xattr.c:677
reiserfs_get_acl+0x63/0x690 fs/reiserfs/xattr_acl.c:209
get_acl+0x152/0x2e0 fs/posix_acl.c:141
check_acl fs/namei.c:277 [inline]
acl_permission_check fs/namei.c:309 [inline]
generic_permission+0x2ba/0x550 fs/namei.c:353
do_inode_permission fs/namei.c:398 [inline]
inode_permission+0x234/0x4a0 fs/namei.c:463
lookup_one_len+0xa6/0x200 fs/namei.c:2557
reiserfs_lookup_privroot+0x85/0x1e0 fs/reiserfs/xattr.c:972
reiserfs_fill_super+0x2b51/0x3240 fs/reiserfs/super.c:2176
mount_bdev+0x24f/0x360 fs/super.c:1417
Fix the problem by bailing from reiserfs_xattr_get() when xattrs are not
yet initialized.
CC: stable@vger.kernel.org
Reported-by: syzbot+9b33c9b118d77ff59b6f@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6cf87e5edd upstream.
There exist many FT2232-based JTAG+UART adapter designs in which
FT2232 Channel A is used for JTAG and Channel B is used for UART.
The best way to handle them in Linux is to have the ftdi_sio driver
create a ttyUSB device only for Channel B and not for Channel A:
a ttyUSB device for Channel A would be bogus and will disappear as
soon as the user runs OpenOCD or other applications that access
Channel A for JTAG from userspace, causing undesirable noise for
users. The ftdi_sio driver already has a dedicated quirk for such
JTAG+UART FT2232 adapters, and it requires assigning custom USB IDs
to such adapters and adding these IDs to the driver with the
ftdi_jtag_quirk applied.
Boutique hardware manufacturer Falconia Partners LLC has created a
couple of JTAG+UART adapter designs (one buffered, one unbuffered)
as part of FreeCalypso project, and this hardware is specifically made
to be used with Linux hosts, with the intent that Channel A will be
accessed only from userspace via appropriate applications, and that
Channel B will be supported by the ftdi_sio kernel driver, presenting
a standard ttyUSB device to userspace. Toward this end the hardware
manufacturer will be programming FT2232 EEPROMs with custom USB IDs,
specifically with the intent that these IDs will be recognized by
the ftdi_sio driver with the ftdi_jtag_quirk applied.
Signed-off-by: Mychaela N. Falconia <falcon@freecalypso.org>
[johan: insert in PID order and drop unused define]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 339ddaa626 upstream.
Starting with the upgrade to v5.8-rc3, I've noticed I wasn't able to
connect to my Bluetooth headset properly anymore. While connecting to
the device would eventually succeed, bluetoothd seemed to be confused
about the current connection state where the state was flapping hence
and forth. Bisecting this issue led to commit 3ca44c16b0 (Bluetooth:
Consolidate encryption handling in hci_encrypt_cfm, 2020-05-19), which
refactored `hci_encrypt_cfm` to also handle updating the connection
state.
The commit in question changed the code to call `hci_connect_cfm` inside
`hci_encrypt_cfm` and to change the connection state. But with the
conversion, we now only update the connection state if a status was set
already. In fact, the reverse should be true: the status should be
updated if no status is yet set. So let's fix the isuse by reversing the
condition.
Fixes: 3ca44c16b0 ("Bluetooth: Consolidate encryption handling in hci_encrypt_cfm")
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ca44c16b0 upstream.
This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection
state is BT_CONFIG so callers don't have to check the state.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Hans-Christian Noren Egtvedt <hegtvedt@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b560a208cd upstream.
This checks if BT_HS is enabled relecting it on MGMT_SETTING_HS instead
of always reporting it as supported.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f19425641c upstream.
Only sockets will have the chan->data set to an actual sk, channels
like A2MP would have its own data which would likely cause a crash when
calling sk_filter, in order to fix this a new callback has been
introduced so channels can implement their own filtering if necessary.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac36d37e94 upstream.
Although the Generic Event Device is a Hardware-reduced
platfom device in principle, it should not be restricted to
ACPI_REDUCED_HARDWARE_ONLY.
Kernels supporting both fixed and hardware-reduced ACPI platforms
should be able to probe the GED when dynamically detecting that a
platform is hardware-reduced. For that, the driver must be
unconditionally built in.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Vishnu Rangayyan <vishnu.rangayyan@apple.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a30a3d2067 upstream
inc_block_group_ro does a calculation to see if we have enough room left
over if we mark this block group as read only in order to see if it's ok
to mark the block group as read only.
The problem is this calculation _only_ works for data, where our used is
always less than our total. For metadata we will overcommit, so this
will almost always fail for metadata.
Fix this by exporting btrfs_can_overcommit, and then see if we have
enough space to remove the remaining free space in the block group we
are trying to mark read only. If we do then we can mark this block
group as read only.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver crashed while a NULL pointer returned by i2c_get_adapter()
has been used to access the i2c bus functions.
The headphone probing function hb_hp_probe() now returns -EPROBE_DEFER
in case the i2c module has not been loaded yet.
Signed-off-by: Joerg Schambacher <joerg@i2audio.com>
commit b560a208cd upstream.
This checks if BT_HS is enabled relecting it on MGMT_SETTING_HS instead
of always reporting it as supported.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit b176dd0ef6 upstream.
Bluetooth High Speed requires hardware support which is very uncommon
nowadays since HS has not pickup interest by the industry.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit f19425641c upstream.
Only sockets will have the chan->data set to an actual sk, channels
like A2MP would have its own data which would likely cause a crash when
calling sk_filter, in order to fix this a new callback has been
introduced so channels can implement their own filtering if necessary.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit eddb773211 upstream.
This fixes various places where a stack variable is used uninitialized.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit 0fedc63fad upstream.
syzbot is able to trigger a failure case inside the loop in
tcf_action_init(), and when this happens we clean up with
tcf_action_destroy(). But, as these actions are already inserted
into the global IDR, other parallel process could free them
before tcf_action_destroy(), then we will trigger a use-after-free.
Fix this by deferring the insertions even later, after the loop,
and committing all the insertions in a separate loop, so we will
never fail in the middle of the insertions any more.
One side effect is that the window between alloction and final
insertion becomes larger, now it is more likely that the loop in
tcf_del_walker() sees the placeholder -EBUSY pointer. So we have
to check for error pointer in tcf_del_walker().
Reported-and-tested-by: syzbot+2287853d392e4b42374a@syzkaller.appspotmail.com
Fixes: 0190c1d452 ("net: sched: atomically check-allocate action")
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e49d8c22f1 upstream.
All TC actions call tcf_idr_insert() for new action at the end
of their ->init(), so we can actually move it to a central place
in tcf_action_init_1().
And once the action is inserted into the global IDR, other parallel
process could free it immediately as its refcnt is still 1, so we can
not fail after this, we need to move it after the goto action
validation to avoid handling the failure case after insertion.
This is found during code review, is not directly triggered by syzbot.
And this prepares for the next patch.
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d093bc236 upstream.
Declare GRE offload support with respect to the inner protocol. Add a
list of supported inner protocols on which the driver can offload
checksum and GSO. For other protocols, inform the stack to do the needed
operations. There is no noticeable impact on GRE performance.
Fixes: 2729984149 ("net/mlx5e: Support TSO and TX checksum offloads for GRE tunnels")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4296adc3e3 upstream.
Openvswitch allows to drop a packet's Ethernet header, therefore
skb_mpls_push() and skb_mpls_pop() might be called with ethernet=true
and mac_len=0. In that case the pointer passed to skb_mod_eth_type()
doesn't point to an Ethernet header and the new Ethertype is written at
unexpected locations.
Fix this by verifying that mac_len is big enough to contain an Ethernet
header.
Fixes: fa4e0f8855 ("net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86bccd0367 upstream.
We got reports from GKE customers flows being reset by netfilter
conntrack unless nf_conntrack_tcp_be_liberal is set to 1.
Traces seemed to suggest ACK packet being dropped by the
packet capture, or more likely that ACK were received in the
wrong order.
wscale=7, SYN and SYNACK not shown here.
This ACK allows the sender to send 1871*128 bytes from seq 51359321 :
New right edge of the window -> 51359321+1871*128=51598809
09:17:23.389210 IP A > B: Flags [.], ack 51359321, win 1871, options [nop,nop,TS val 10 ecr 999], length 0
09:17:23.389212 IP B > A: Flags [.], seq 51422681:51424089, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 1408
09:17:23.389214 IP A > B: Flags [.], ack 51422681, win 1376, options [nop,nop,TS val 10 ecr 999], length 0
09:17:23.389253 IP B > A: Flags [.], seq 51424089:51488857, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 64768
09:17:23.389272 IP A > B: Flags [.], ack 51488857, win 859, options [nop,nop,TS val 10 ecr 999], length 0
09:17:23.389275 IP B > A: Flags [.], seq 51488857:51521241, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 32384
Receiver now allows to send 606*128=77568 from seq 51521241 :
New right edge of the window -> 51521241+606*128=51598809
09:17:23.389296 IP A > B: Flags [.], ack 51521241, win 606, options [nop,nop,TS val 10 ecr 999], length 0
09:17:23.389308 IP B > A: Flags [.], seq 51521241:51553625, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 32384
It seems the sender exceeds RWIN allowance, since 51611353 > 51598809
09:17:23.389346 IP B > A: Flags [.], seq 51553625:51611353, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 57728
09:17:23.389356 IP B > A: Flags [.], seq 51611353:51618393, ack 1577, win 268, options [nop,nop,TS val 999 ecr 10], length 7040
09:17:23.389367 IP A > B: Flags [.], ack 51611353, win 0, options [nop,nop,TS val 10 ecr 999], length 0
netfilter conntrack is not happy and sends RST
09:17:23.389389 IP A > B: Flags [R], seq 92176528, win 0, length 0
09:17:23.389488 IP B > A: Flags [R], seq 174478967, win 0, length 0
Now imagine ACK were delivered out of order and tcp_add_backlog() sets window based on wrong packet.
New right edge of the window -> 51521241+859*128=51631193
Normally TCP stack handles OOO packets just fine, but it
turns out tcp_add_backlog() does not. It can update the window
field of the aggregated packet even if the ACK sequence
of the last received packet is too old.
Many thanks to Alexandre Ferrieux for independently reporting the issue
and suggesting a fix.
Fixes: 4f693b55c3 ("tcp: implement coalescing on backlog queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4243219141 ]
In mmc_queue_setup_discard() the mmc driver queue's discard_granularity
might be set as 0 (when card->pref_erase > max_discard) while the mmc
device still declares to support discard operation. This is buggy and
triggered the following kernel warning message,
WARNING: CPU: 0 PID: 135 at __blkdev_issue_discard+0x200/0x294
CPU: 0 PID: 135 Comm: f2fs_discard-17 Not tainted 5.9.0-rc6 #1
Hardware name: Google Kevin (DT)
pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--)
pc : __blkdev_issue_discard+0x200/0x294
lr : __blkdev_issue_discard+0x54/0x294
sp : ffff800011dd3b10
x29: ffff800011dd3b10 x28: 0000000000000000 x27: ffff800011dd3cc4 x26: ffff800011dd3e18 x25: 000000000004e69b x24: 0000000000000c40 x23: ffff0000f1deaaf0 x22: ffff0000f2849200 x21: 00000000002734d8 x20: 0000000000000008 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000394 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 00000000000008b0 x9 : ffff800011dd3cb0 x8 : 000000000004e69b x7 : 0000000000000000 x6 : ffff0000f1926400 x5 : ffff0000f1940800 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 0000000000000008 x1 : 00000000002734d8 x0 : 0000000000000000 Call trace:
__blkdev_issue_discard+0x200/0x294
__submit_discard_cmd+0x128/0x374
__issue_discard_cmd_orderly+0x188/0x244
__issue_discard_cmd+0x2e8/0x33c
issue_discard_thread+0xe8/0x2f0
kthread+0x11c/0x120
ret_from_fork+0x10/0x1c
---[ end trace e4c8023d33dfe77a ]---
This patch fixes the issue by setting discard_granularity as SECTOR_SIZE
instead of 0 when (card->pref_erase > max_discard) is true. Now no more
complain from __blkdev_issue_discard() for the improper value of discard
granularity.
This issue is exposed after commit b35fd7422c ("block: check queue's
limits.discard_granularity in __blkdev_issue_discard()"), a "Fixes:" tag
is also added for the commit to make sure people won't miss this patch
after applying the change of __blkdev_issue_discard().
Fixes: e056a1b5b6 ("mmc: queue: let host controllers specify maximum discard timeout")
Fixes: b35fd7422c ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()").
Reported-and-tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20201002013852.51968-1-colyli@suse.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38b1dc47a3 ]
If someone calls setsockopt() twice to set a server key keyring, the first
keyring is leaked.
Fix it to return an error instead if the server key keyring is already set.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fea9911124 ]
The keyring containing the server's tokens isn't network-namespaced, so it
shouldn't be looked up with a network namespace. It is expected to be
owned specifically by the server, so namespacing is unnecessary.
Fixes: a58946c158 ("keys: Pass the network namespace into request_key mechanism")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa1d113a0f ]
conn->state_lock may be taken in softirq mode, but a previous patch
replaced an outer lock in the response-packet event handling code, and lost
the _bh from that when doing so.
Fix this by applying the _bh annotation to the state_lock locking.
Fixes: a1399f8bb0 ("rxrpc: Call channels should have separate call number spaces")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a059cd5ca ]
If rxrpc_read() (which allows KEYCTL_READ to read a key), sees a token of a
type it doesn't recognise, it can BUG in a couple of places, which is
unnecessary as it can easily get back to userspace.
Fix this to print an error message instead.
Fixes: 99455153d0 ("RxRPC: Parse security index 5 keys (Kerberos 5)")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56305118e0 ]
The session key should be encoded with just the 8 data bytes and
no length; ENCODE_DATA precedes it with a 4 byte length, which
confuses some existing tools that try to parse this format.
Add an ENCODE_BYTES macro that does not include a length, and use
it for the key. Also adjust the expected length.
Note that commit 774521f353 ("rxrpc: Fix an assertion in
rxrpc_read()") had fixed a BUG by changing the length rather than
fixing the encoding. The original length was correct.
Fixes: 99455153d0 ("RxRPC: Parse security index 5 keys (Kerberos 5)")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4a16052bc ]
When interface is attached while in promiscuous mode and with VLAN
filtering turned off, both configurations are not respected and VLAN
filtering is performed.
There are 2 flows which add the any-vid rules during interface attach:
VLAN creation table and set rx mode. Each is relaying on the other to
add any-vid rules, eventually non of them does.
Fix this by adding any-vid rules on VLAN creation regardless of
promiscuous mode.
Fixes: 9df30601c8 ("net/mlx5e: Restore vlan filter after seamless reset")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c7353b6f7 ]
Prior to this patch unloading an interface in promiscuous mode with RX
VLAN filtering feature turned off - resulted in a warning. This is due
to a wrong condition in the VLAN rules cleanup flow, which left the
any-vid rules in the VLAN steering table. These rules prevented
destroying the flow group and the flow table.
The any-vid rules are removed in 2 flows, but none of them remove it in
case both promiscuous is set and VLAN filtering is off. Fix the issue by
changing the condition of the VLAN table cleanup flow to clean also in
case of promiscuous mode.
mlx5_core 0000:00:08.0: mlx5_destroy_flow_group:2123:(pid 28729): Flow group 20 wasn't destroyed, refcount > 1
mlx5_core 0000:00:08.0: mlx5_destroy_flow_group:2123:(pid 28729): Flow group 19 wasn't destroyed, refcount > 1
mlx5_core 0000:00:08.0: mlx5_destroy_flow_table:2112:(pid 28729): Flow table 262149 wasn't destroyed, refcount > 1
...
...
------------[ cut here ]------------
FW pages counter is 11560 after reclaiming all pages
WARNING: CPU: 1 PID: 28729 at
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:660
mlx5_reclaim_startup_pages+0x178/0x230 [mlx5_core]
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
mlx5_function_teardown+0x2f/0x90 [mlx5_core]
mlx5_unload_one+0x71/0x110 [mlx5_core]
remove_one+0x44/0x80 [mlx5_core]
pci_device_remove+0x3e/0xc0
device_release_driver_internal+0xfb/0x1c0
device_release_driver+0x12/0x20
pci_stop_bus_device+0x68/0x90
pci_stop_and_remove_bus_device+0x12/0x20
hv_eject_device_work+0x6f/0x170 [pci_hyperv]
? __schedule+0x349/0x790
process_one_work+0x206/0x400
worker_thread+0x34/0x3f0
? process_one_work+0x400/0x400
kthread+0x126/0x140
? kthread_park+0x90/0x90
ret_from_fork+0x22/0x30
---[ end trace 6283bde8d26170dc ]---
Fixes: 9df30601c8 ("net/mlx5e: Restore vlan filter after seamless reset")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3c9402373 ]
Prior to this fix, in Striding RQ mode the driver was vulnerable when
receiving packets in the range (stride size - headroom, stride size].
Where stride size is calculated by mtu+headroom+tailroom aligned to the
closest power of 2.
Usually, this filtering is performed by the HW, except for a few cases:
- Between 2 VFs over the same PF with different MTUs
- On bluefield, when the host physical function sets a larger MTU than
the ARM has configured on its representor and uplink representor.
When the HW filtering is not present, packets that are larger than MTU
might be harmful for the RQ's integrity, in the following impacts:
1) Overflow from one WQE to the next, causing a memory corruption that
in most cases is unharmful: as the write happens to the headroom of next
packet, which will be overwritten by build_skb(). In very rare cases,
high stress/load, this is harmful. When the next WQE is not yet reposted
and points to existing SKB head.
2) Each oversize packet overflows to the headroom of the next WQE. On
the last WQE of the WQ, where addresses wrap-around, the address of the
remainder headroom does not belong to the next WQE, but it is out of the
memory region range. This results in a HW CQE error that moves the RQ
into an error state.
Solution:
Add a page buffer at the end of each WQE to absorb the leak. Actually
the maximal overflow size is headroom but since all memory units must be
of the same size, we use page size to comply with UMR WQEs. The increase
in memory consumption is of a single page per RQ. Initialize the mkey
with all MTTs pointing to a default page. When the channels are
activated, UMR WQEs will redirect the RX WQEs to the actual memory from
the RQ's pool, while the overflow MTTs remain mapped to the default page.
Fixes: 73281b78a3 ("net/mlx5e: Derive Striding RQ size from MTU")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50b2412b7e ]
Upon command completion timeout, driver simulates a forced command
completion. In a rare case where real interrupt for that command arrives
simultaneously, it might release the command entry while the forced
handler might still access it.
Fix that by adding an entry refcount, to track current amount of allowed
handlers. Command entry to be released only when this refcount is
decremented to zero.
Command refcount is always initialized to one. For callback commands,
command completion handler is the symmetric flow to decrement it. For
non-callback commands, it is wait_func().
Before ringing the doorbell, increment the refcount for the real completion
handler. Once the real completion handler is called, it will decrement it.
For callback commands, once the delayed work is scheduled, increment the
refcount. Upon callback command completion handler, we will try to cancel
the timeout callback. In case of success, we need to decrement the callback
refcount as it will never run.
In addition, gather the entry index free and the entry free into a one
flow for all command types release.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a03b8a35a ]
Open vSwitch and Linux bridge will disable LRO of the interface
when this interface added to them. Now when disable the LRO, the
virtio-net csum is disable too. That drops the forwarding performance.
Fixes: a02e8964ea ("virtio-net: ethtool configurable LRO")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9666ea66a7 ]
Adds the missing .stop entry in the Belkin driver_info structure.
Fixes: e20bd60bf6 ("net: usb: asix88179_178a: Add support for the Belkin B2B128")
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 709a16be05 ]
Mistakenly bit 2 was set instead of bit 3 as in the vendor driver.
Fixes: a7a92cf815 ("r8169: sync PCIe PHY init with vendor driver 8.047.01")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7286502858 ]
If mlxsw_sp_acl_tcam_group_id_get() fails, the mutex initialized earlier
is not destroyed.
Fix this by initializing the mutex after calling the function. This is
symmetric to mlxsw_sp_acl_tcam_group_del().
Fixes: 5ec2ee28d2 ("mlxsw: spectrum_acl: Introduce a mutex to guard region list updates")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4663ff6025 ]
To start also "phy state machine", with UP state as it should be,
the phy_start() has to be used, in another case machine even is not
triggered. After this change negotiation is supposed to be triggered
by SM workqueue.
It's not correct usage, but it appears after the following patch,
so add it as a fix.
Fixes: 74a992b359 ("net: phy: add phy_check_link_status")
Signed-off-by: Ivan Khoronzhuk <ikhoronz@cisco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc5cbd73eb ]
With the support of generic PM callbacks, drivers no longer need to use
legacy .suspend() and .resume() in which they had to maintain PCI states
changes and device's power state themselves. The required operations are
done by PCI core.
PCI drivers are not expected to invoke PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(),
pci_set_power_state(), etc. Their tasks are completed by PCI core itself.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e94ee17134 ]
The struct flowi must never be interpreted by itself as its size
depends on the address family. Therefore it must always be grouped
with its original family value.
In this particular instance, the original family value is lost in
the function xfrm_state_find. Therefore we get a bogus read when
it's coupled with the wrong family which would occur with inter-
family xfrm states.
This patch fixes it by keeping the original family value.
Note that the same bug could potentially occur in LSM through
the xfrm_state_pol_flow_match hook. I checked the current code
there and it seems to be safe for now as only secid is used which
is part of struct flowi_common. But that API should be changed
so that so that we don't get new bugs in the future. We could
do that by replacing fl with just secid or adding a family field.
Reported-by: syzbot+577fbac3145a6eb2e7a5@syzkaller.appspotmail.com
Fixes: 48b8d78315 ("[XFRM]: State selection update to use inner...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afdd1ebb72 ]
When FUJITSU_LAPTOP is enabled and NEW_LEDS is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for LEDS_CLASS
Depends on [n]: NEW_LEDS [=n]
Selected by [y]:
- FUJITSU_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && INPUT [=y] && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] || ACPI_VIDEO [=n]=n)
The reason is that FUJITSU_LAPTOP selects LEDS_CLASS without depending on
or selecting NEW_LEDS while LEDS_CLASS is subordinate to NEW_LEDS.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Fixes: d89bcc83e7 ("platform/x86: fujitsu-laptop: select LEDS_CLASS")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7241c5a697 ]
EEE should be only be enabled during stmmac_mac_link_up() when the
link are up and being set up properly. set_eee should only do settings
configuration and disabling the eee.
Without this fix, turning on EEE using ethtool will return
"Operation not supported". This is due to the driver is in a dead loop
waiting for eee to be advertised in the for eee to be activated but the
driver will only configure the EEE advertisement after the eee is
activated.
Ethtool should only return "Operation not supported" if there is no EEE
capbility in the MAC controller.
Fixes: 8a7493e58a ("net: stmmac: Fix a race in EEE enable callback")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8366685b28 ]
When we clone state only add_time was cloned. It missed values like
bytes, packets. Now clone the all members of the structure.
v1->v3:
- use memcpy to copy the entire structure
Fixes: 80c9abaabf ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7aa05d3047 ]
XFRMA_SEC_CTX was not cloned from the old to the new.
Migrate this attribute during XFRMA_MSG_MIGRATE
v1->v2:
- return -ENOMEM on error
v2->v3:
- fix return type to int
Fixes: 80c9abaabf ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91a46c6d1b ]
XFRMA_REPLAY_ESN_VAL was not cloned completely from the old to the new.
Migrate this attribute during XFRMA_MSG_MIGRATE
v1->v2:
- move curleft cloning to a separate patch
Fixes: af2f464e32 ("xfrm: Assign esn pointers when cloning a state")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 545e5c5716 ]
XFRMA_SET_MARK and XFRMA_SET_MARK_MASK was not cloned from the old
to the new. Migrate these two attributes during XFRMA_MSG_MIGRATE
Fixes: 9b42c1f179 ("xfrm: Extend the output_mark to support input direction and masking.")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8aa7b526dc upstream.
With multiple DNAT rules it's possible that after destination
translation the resulting tuples collide.
For example, two openvswitch flows:
nw_dst=10.0.0.10,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20))
nw_dst=10.0.0.20,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20))
Assuming two TCP clients initiating the following connections:
10.0.0.10:5000->10.0.0.10:10
10.0.0.10:5000->10.0.0.20:10
Both tuples would translate to 10.0.0.10:5000->20.0.0.1:20 causing
nf_conntrack_confirm() to fail because of tuple collision.
Netfilter handles this case by allocating a null binding for SNAT at
egress by default. Perform the same operation in openvswitch for DNAT
if no explicit SNAT is requested by the user and allocate a null binding
for SNAT for packets in the "original" direction.
Reported-at: https://bugzilla.redhat.com/1877128
Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: 05752523e5 ("openvswitch: Interface with NAT.")
Signed-off-by: Dumitru Ceara <dceara@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a9e774959 upstream.
The variable "i" isn't initialized back correctly after the first loop
under the label inst_rollback gets executed.
The value of "i" is assigned to be option_count - 1, and the ensuing
loop (under alloc_rollback) begins by initializing i--.
Thus, the value of i when the loop begins execution will now become
i = option_count - 2.
Thus, when kfree(dst_opts[i]) is called in the second loop in this
order, (i.e., inst_rollback followed by alloc_rollback),
dst_optsp[option_count - 2] is the first element freed, and
dst_opts[option_count - 1] does not get freed, and thus, a memory
leak is caused.
This memory leak can be fixed, by assigning i = option_count (instead of
option_count - 1).
Fixes: 80f7c6683f ("team: add support for per-port options")
Reported-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com
Tested-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89d01748b2 upstream.
Some devices set needed_headroom. If we ignore it, we might
end up crashing in various skb_push() for example in ipgre_header()
since some layers assume enough headroom has been reserved.
Fixes: 1d76efe157 ("team: add support for non-ethernet devices")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5b3f43364 upstream.
When the NACK and BUS error bits are set by the hardware, the driver is
responsible for clearing them by writing "1" into the corresponding
status registers.
Hence perform the necessary operations in owl_i2c_interrupt().
Fixes: d211e62af4 ("i2c: Add Actions Semiconductor Owl family S900 I2C driver")
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1334d3b4e4 upstream.
Apparently, 15 cycles of the peripheral clock are used by the controller
for sampling and filtering. Because this was not known before, the rate
calculation is slightly off.
Clean up and fix the calculation taking this filtering delay into account.
Fixes: 30021e3707 ("i2c: add support for Amlogic Meson I2C controller")
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28683e847e upstream.
When the slave address is written in do_start(), SLAVE_ADDR is written
completely. This may overwrite some setting related to the clock rate
or signal filtering.
Fix this by writing only the bits related to slave address. To avoid
causing unexpected changed, explicitly disable filtering or high/low
clock mode which may have been left over by the bootloader.
Fixes: 30021e3707 ("i2c: add support for Amlogic Meson I2C controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64b7f674c2 upstream.
On setxattr() syscall path due to an apprent typo the size of a dynamically
allocated memory chunk for storing struct smb2_file_full_ea_info object is
computed incorrectly, to be more precise the first addend is the size of
a pointer instead of the wanted object size. Coincidentally it makes no
difference on 64-bit platforms, however on 32-bit targets the following
memcpy() writes 4 bytes of data outside of the dynamically allocated memory.
=============================================================================
BUG kmalloc-16 (Not tainted): Redzone overwritten
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc
INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201
INFO: Object 0x6f171df3 @offset=352 fp=0x00000000
Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69 ........snrub.fi
Redzone 79e69a6f: 73 68 32 0a sh2.
Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
CPU: 0 PID: 8196 Comm: attr Tainted: G B 5.9.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
Call Trace:
dump_stack+0x54/0x6e
print_trailer+0x12c/0x134
check_bytes_and_report.cold+0x3e/0x69
check_object+0x18c/0x250
free_debug_processing+0xfe/0x230
__slab_free+0x1c0/0x300
kfree+0x1d3/0x220
smb2_set_ea+0x27d/0x540
cifs_xattr_set+0x57f/0x620
__vfs_setxattr+0x4e/0x60
__vfs_setxattr_noperm+0x4e/0x100
__vfs_setxattr_locked+0xae/0xd0
vfs_setxattr+0x4e/0xe0
setxattr+0x12c/0x1a0
path_setxattr+0xa4/0xc0
__ia32_sys_lsetxattr+0x1d/0x20
__do_fast_syscall_32+0x40/0x70
do_fast_syscall_32+0x29/0x60
do_SYSENTER_32+0x15/0x20
entry_SYSENTER_32+0x9f/0xf2
Fixes: 5517554e43 ("cifs: Add support for writing attributes on SMB2+")
Signed-off-by: Vladimir Zapolskiy <vladimir@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45a36a18d0 upstream.
xfrm interfaces currently test for !skb->ignore_df when deciding
whether to update the pmtu on the skb's dst. Because of this, no pmtu
exception is created when we do something like:
ping -s 1438 <dest>
By dropping this check, the pmtu exception will be created and the
next ping attempt will work.
Fixes: f203b76d78 ("xfrm: Add virtual xfrm interfaces")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d4194abfc upstream.
Currently nvme_tcp_try_send_data() doesn't use kernel_sendpage() to
send slab pages. But for pages allocated by __get_free_pages() without
__GFP_COMP, which also have refcount as 0, they are still sent by
kernel_sendpage() to remote end, this is problematic.
The new introduced helper sendpage_ok() checks both PageSlab tag and
page_count counter, and returns true if the checking page is OK to be
sent by kernel_sendpage().
This patch fixes the page checking issue of nvme_tcp_try_send_data()
with sendpage_ok(). If sendpage_ok() returns true, send this page by
kernel_sendpage(), otherwise use sock_no_sendpage to handle this page.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf83a17ede upstream.
commit a10674bf24 ("tcp: detecting the misuse of .sendpage for Slab
objects") adds the checks for Slab pages, but the pages don't have
page_count are still missing from the check.
Network layer's sendpage method is not designed to send page_count 0
pages neither, therefore both PageSlab() and page_count() should be
both checked for the sending page. This is exactly what sendpage_ok()
does.
This patch uses sendpage_ok() in do_tcp_sendpages() to detect misused
.sendpage, to make the code more robust.
Fixes: a10674bf24 ("tcp: detecting the misuse of .sendpage for Slab objects")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c381b07941 upstream.
The original problem was from nvme-over-tcp code, who mistakenly uses
kernel_sendpage() to send pages allocated by __get_free_pages() without
__GFP_COMP flag. Such pages don't have refcount (page_count is 0) on
tail pages, sending them by kernel_sendpage() may trigger a kernel panic
from a corrupted kernel heap, because these pages are incorrectly freed
in network stack as page_count 0 pages.
This patch introduces a helper sendpage_ok(), it returns true if the
checking page,
- is not slab page: PageSlab(page) is false.
- has page refcount: page_count(page) is not zero
All drivers who want to send page to remote end by kernel_sendpage()
may use this helper to check whether the page is OK. If the helper does
not return true, the driver should try other non sendpage method (e.g.
sock_no_sendpage()) to handle the page.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 033b5d7755 upstream.
There have been elusive reports of filemap_fault() hitting its
VM_BUG_ON_PAGE(page_to_pgoff(page) != offset, page) on kernels built
with CONFIG_READ_ONLY_THP_FOR_FS=y.
Suren has hit it on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y and
CONFIG_NUMA is not set: and he has analyzed it down to how khugepaged
without NUMA reuses the same huge page after collapse_file() failed
(whereas NUMA targets its allocation to the respective node each time).
And most of us were usually testing with CONFIG_NUMA=y kernels.
collapse_file(old start)
new_page = khugepaged_alloc_page(hpage)
__SetPageLocked(new_page)
new_page->index = start // hpage->index=old offset
new_page->mapping = mapping
xas_store(&xas, new_page)
filemap_fault
page = find_get_page(mapping, offset)
// if offset falls inside hpage then
// compound_head(page) == hpage
lock_page_maybe_drop_mmap()
__lock_page(page)
// collapse fails
xas_store(&xas, old page)
new_page->mapping = NULL
unlock_page(new_page)
collapse_file(new start)
new_page = khugepaged_alloc_page(hpage)
__SetPageLocked(new_page)
new_page->index = start // hpage->index=new offset
new_page->mapping = mapping // mapping becomes valid again
// since compound_head(page) == hpage
// page_to_pgoff(page) got changed
VM_BUG_ON_PAGE(page_to_pgoff(page) != offset)
An initial patch replaced __SetPageLocked() by lock_page(), which did
fix the race which Suren illustrates above. But testing showed that it's
not good enough: if the racing task's __lock_page() gets delayed long
after its find_get_page(), then it may follow collapse_file(new start)'s
successful final unlock_page(), and crash on the same VM_BUG_ON_PAGE.
It could be fixed by relaxing filemap_fault()'s VM_BUG_ON_PAGE to a
check and retry (as is done for mapping), with similar relaxations in
find_lock_entry() and pagecache_get_page(): but it's not obvious what
else might get caught out; and khugepaged non-NUMA appears to be unique
in exposing a page to page cache, then revoking, without going through
a full cycle of freeing before reuse.
Instead, non-NUMA khugepaged_prealloc_page() release the old page
if anyone else has a reference to it (1% of cases when I tested).
Although never reported on huge tmpfs, I believe its find_lock_entry()
has been at similar risk; but huge tmpfs does not rely on khugepaged
for its normal working nearly so much as READ_ONLY_THP_FOR_FS does.
Reported-by: Denis Lisov <dennis.lissov@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206569
Link: https://lore.kernel.org/linux-mm/?q=20200219144635.3b7417145de19b65f258c943%40linux-foundation.org
Reported-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/linux-xfs/?q=20200616013309.GB815%40lca.pw
Reported-and-analyzed-by: Suren Baghdasaryan <surenb@google.com>
Fixes: 87c460a0bd ("mm/khugepaged: collapse_shmem() without freezing new_page")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org # v4.9+
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bab690930 upstream.
When try_module_get() fails in the nvme_dev_open() it returns without
releasing the ctrl reference which was taken earlier.
Put the ctrl reference which is taken before calling the
try_module_get() in the error return code path.
Fixes: 52a3974feb "nvme-core: get/put ctrl and transport module in nvme_dev_open/release()"
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d4572a9d7 upstream.
[BUG]
When the data space is exhausted, even if the inode has NOCOW attribute,
we will still refuse to truncate unaligned range due to ENOSPC.
The following script can reproduce it pretty easily:
#!/bin/bash
dev=/dev/test/test
mnt=/mnt/btrfs
umount $dev &> /dev/null
umount $mnt &> /dev/null
mkfs.btrfs -f $dev -b 1G
mount -o nospace_cache $dev $mnt
touch $mnt/foobar
chattr +C $mnt/foobar
xfs_io -f -c "pwrite -b 4k 0 4k" $mnt/foobar > /dev/null
xfs_io -f -c "pwrite -b 4k 0 1G" $mnt/padding &> /dev/null
sync
xfs_io -c "fpunch 0 2k" $mnt/foobar
umount $mnt
Currently this will fail at the fpunch part.
[CAUSE]
Because btrfs_truncate_block() always reserves space without checking
the NOCOW attribute.
Since the writeback path follows NOCOW bit, we only need to bother the
space reservation code in btrfs_truncate_block().
[FIX]
Make btrfs_truncate_block() follow btrfs_buffered_write() to try to
reserve data space first, and fall back to NOCOW check only when we
don't have enough space.
Such always-try-reserve is an optimization introduced in
btrfs_buffered_write(), to avoid expensive btrfs_check_can_nocow() call.
This patch will export check_can_nocow() as btrfs_check_can_nocow(), and
use it in btrfs_truncate_block() to fix the problem.
Reported-by: Martin Doucha <martin.doucha@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 260a63395f upstream.
If we attempt to do a RWF_NOWAIT write against a file range for which we
can only do NOCOW for a part of it, due to the existence of holes or
shared extents for example, we proceed with the write as if it were
possible to NOCOW the whole range.
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ touch /mnt/sdj/bar
$ chattr +C /mnt/sdj/bar
$ xfs_io -d -c "pwrite -S 0xab -b 256K 0 256K" /mnt/bar
wrote 262144/262144 bytes at offset 0
256 KiB, 1 ops; 0.0003 sec (694.444 MiB/sec and 2777.7778 ops/sec)
$ xfs_io -c "fpunch 64K 64K" /mnt/bar
$ sync
$ xfs_io -d -c "pwrite -N -V 1 -b 128K -S 0xfe 0 128K" /mnt/bar
wrote 131072/131072 bytes at offset 0
128 KiB, 1 ops; 0.0007 sec (160.051 MiB/sec and 1280.4097 ops/sec)
This last write should fail with -EAGAIN since the file range from 64K to
128K is a hole. On xfs it fails, as expected, but on ext4 it currently
succeeds because apparently it is expensive to check if there are extents
allocated for the whole range, but I'll check with the ext4 people.
Fix the issue by checking if check_can_nocow() returns a number of
NOCOW'able bytes smaller then the requested number of bytes, and if it
does return -EAGAIN.
Fixes: edf064e7c6 ("btrfs: nowait aio support")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b7faadd98 upstream.
[BUG]
When deleting large files (which cross block group boundary) with
discard mount option, we find some btrfs_discard_extent() calls only
trimmed part of its space, not the whole range:
btrfs_discard_extent: type=0x1 start=19626196992 len=2144530432 trimmed=1073741824 ratio=50%
type: bbio->map_type, in above case, it's SINGLE DATA.
start: Logical address of this trim
len: Logical length of this trim
trimmed: Physically trimmed bytes
ratio: trimmed / len
Thus leaving some unused space not discarded.
[CAUSE]
When discard mount option is specified, after a transaction is fully
committed (super block written to disk), we begin to cleanup pinned
extents in the following call chain:
btrfs_commit_transaction()
|- btrfs_finish_extent_commit()
|- find_first_extent_bit(unpin, 0, &start, &end, EXTENT_DIRTY);
|- btrfs_discard_extent()
However, pinned extents are recorded in an extent_io_tree, which can
merge adjacent extent states.
When a large file gets deleted and it has adjacent file extents across
block group boundary, we will get a large merged range like this:
|<--- BG1 --->|<--- BG2 --->|
|//////|<-- Range to discard --->|/////|
To discard that range, we have the following calls:
btrfs_discard_extent()
|- btrfs_map_block()
| Returned bbio will end at BG1's end. As btrfs_map_block()
| never returns result across block group boundary.
|- btrfs_issuse_discard()
Issue discard for each stripe.
So we will only discard the range in BG1, not the remaining part in BG2.
Furthermore, this bug is not that reliably observed, for above case, if
there is no other extent in BG2, BG2 will be empty and btrfs will trim
all space of BG2, covering up the bug.
[FIX]
- Allow __btrfs_map_block_for_discard() to modify @length parameter
btrfs_map_block() uses its @length paramter to notify the caller how
many bytes are mapped in current call.
With __btrfs_map_block_for_discard() also modifing the @length,
btrfs_discard_extent() now understands when to do extra trim.
- Call btrfs_map_block() in a loop until we hit the range end Since we
now know how many bytes are mapped each time, we can iterate through
each block group boundary and issue correct trim for each range.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d974619a7 upstream.
The old code goes:
offset = logical - em->start;
length = min_t(u64, em->len - offset, length);
Where @length calculation is dependent on offset, it can take reader
several more seconds to find it's just the same code as:
offset = logical - em->start;
length = min_t(u64, em->start + em->len - logical, length);
Use above code to make the length calculate independent from other
variable, thus slightly increase the readability.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9722b10148 upstream.
When doing an incremental send and a file has extents shared with itself
at different file offsets, it's possible for send to emit clone operations
that will fail at the destination because the source range goes beyond the
file's current size. This happens when the file size has increased in the
send snapshot, there is a hole between the shared extents and both shared
extents are at file offsets which are greater the file's size in the
parent snapshot.
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt/sdb
$ xfs_io -f -c "pwrite -S 0xf1 0 64K" /mnt/sdb/foobar
$ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/base
$ btrfs send -f /tmp/1.snap /mnt/sdb/base
# Create a 320K extent at file offset 512K.
$ xfs_io -c "pwrite -S 0xab 512K 64K" /mnt/sdb/foobar
$ xfs_io -c "pwrite -S 0xcd 576K 64K" /mnt/sdb/foobar
$ xfs_io -c "pwrite -S 0xef 640K 64K" /mnt/sdb/foobar
$ xfs_io -c "pwrite -S 0x64 704K 64K" /mnt/sdb/foobar
$ xfs_io -c "pwrite -S 0x73 768K 64K" /mnt/sdb/foobar
# Clone part of that 320K extent into a lower file offset (192K).
# This file offset is greater than the file's size in the parent
# snapshot (64K). Also the clone range is a bit behind the offset of
# the 320K extent so that we leave a hole between the shared extents.
$ xfs_io -c "reflink /mnt/sdb/foobar 448K 192K 192K" /mnt/sdb/foobar
$ btrfs subvolume snapshot -r /mnt/sdb /mnt/sdb/incr
$ btrfs send -p /mnt/sdb/base -f /tmp/2.snap /mnt/sdb/incr
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ btrfs receive -f /tmp/1.snap /mnt/sdc
$ btrfs receive -f /tmp/2.snap /mnt/sdc
ERROR: failed to clone extents to foobar: Invalid argument
The problem is that after processing the extent at file offset 256K, which
refers to the first 128K of the 320K extent created by the buffered write
operations, we have 'cur_inode_next_write_offset' set to 384K, which
corresponds to the end offset of the partially shared extent (256K + 128K)
and to the current file size in the receiver. Then when we process the
extent at offset 512K, we do extent backreference iteration to figure out
if we can clone the extent from some other inode or from the same inode,
and we consider the extent at offset 256K of the same inode as a valid
source for a clone operation, which is not correct because at that point
the current file size in the receiver is 384K, which corresponds to the
end of last processed extent (at file offset 256K), so using a clone
source range from 256K to 256K + 320K is invalid because that goes past
the current size of the file (384K) - this makes the receiver get an
-EINVAL error when attempting the clone operation.
So fix this by excluding clone sources that have a range that goes beyond
the current file size in the receiver when iterating extent backreferences.
A test case for fstests follows soon.
Fixes: 11f2069c11 ("Btrfs: send, allow clone operations within the same file")
CC: stable@vger.kernel.org # 5.5+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11f2069c11 upstream.
For send we currently skip clone operations when the source and
destination files are the same. This is so because clone didn't support
this case in its early days, but support for it was added back in May
2013 by commit a96fbc7288 ("Btrfs: allow file data clone within a
file"). This change adds support for it.
Example:
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdd /mnt/sdd
$ xfs_io -f -c "pwrite -S 0xab -b 64K 0 64K" /mnt/sdd/foobar
$ xfs_io -c "reflink /mnt/sdd/foobar 0 64K 64K" /mnt/sdd/foobar
$ btrfs subvolume snapshot -r /mnt/sdd /mnt/sdd/snap
$ mkfs.btrfs -f /dev/sde
$ mount /dev/sde /mnt/sde
$ btrfs send /mnt/sdd/snap | btrfs receive /mnt/sde
Without this change file foobar at the destination has a single 128Kb
extent:
$ filefrag -v /mnt/sde/snap/foobar
Filesystem type is: 9123683e
File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 31: 0.. 31: 32: last,unknown_loc,delalloc,eof
/mnt/sde/snap/foobar: 1 extent found
With this we get a single 64Kb extent that is shared at file offsets 0
and 64K, just like in the source filesystem:
$ filefrag -v /mnt/sde/snap/foobar
Filesystem type is: 9123683e
File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 15: 3328.. 3343: 16: shared
1: 16.. 31: 3328.. 3343: 16: 3344: last,shared,eof
/mnt/sde/snap/foobar: 2 extents found
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 845b89127b upstream.
By default, PCI drivers with runtime PM enabled will skip the calls
to suspend and resume on system PM. For this driver, we don't want
that, as we need to perform additional steps for system PM to work
properly on all systems. So instruct the PM core to not skip these
calls.
Fixes: a9c8088c79 ("i2c: i801: Don't restore config registers on runtime PM")
Reported-by: Volker Rümelin <volker.ruemelin@googlemail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
[iwamatsu: Use DPM_FLAG_NEVER_SKIP instead of DPM_FLAG_NO_DIRECT_COMPLETE]
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29b4f5f188 upstream.
Since glibc 2.28 when running 'perf top --stdio', input handling no
longer works, but hitting any key always just prints the "Mapped keys"
help text.
To fix it, call clearerr() in the display_thread() loop to clear any EOF
sticky errors, as instructed in the glibc NEWS file
(https://sourceware.org/git/?p=glibc.git;a=blob;f=NEWS):
* All stdio functions now treat end-of-file as a sticky condition. If you
read from a file until EOF, and then the file is enlarged by another
process, you must call clearerr or another function with the same effect
(e.g. fseek, rewind) before you can read the additional data. This
corrects a longstanding C99 conformance bug. It is most likely to affect
programs that use stdio to read interactive input from a terminal.
(Bug #1190.)
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200305083714.9381-2-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbd660e6b2 upstream.
Commit 2d4f27999b ("perf data: Add global path holder") missed path
conversion in tests/topology.c, causing the "Session topology" testcase
to "hang" (waits forever for input from stdin) when doing "ssh $VM perf
test".
Can be reproduced by running "cat | perf test topo", and crashed by
replacing cat with true:
$ true | perf test -v topo
40: Session topology :
--- start ---
test child forked, pid 3638
templ file: /tmp/perf-test-QPvAch
incompatible file format
incompatible file format (rerun with -v to learn more)
free(): invalid pointer
test child interrupted
---- end ----
Session topology: FAILED!
Committer testing:
Reproduced the above result before the patch and after it is back
working:
# true | perf test -v topo
41: Session topology :
--- start ---
test child forked, pid 19374
templ file: /tmp/perf-test-YOTEQg
CPU 0, core 0, socket 0
CPU 1, core 1, socket 0
CPU 2, core 2, socket 0
CPU 3, core 3, socket 0
CPU 4, core 0, socket 0
CPU 5, core 1, socket 0
CPU 6, core 2, socket 0
CPU 7, core 3, socket 0
test child finished with 0
---- end ----
Session topology: Ok
#
Fixes: 2d4f27999b ("perf data: Add global path holder")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200423115341.562782-1-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 720ef73d1a upstream.
Evaluating ACPI _BCL could fail, then ACPI buffer size will be set to 0.
When reuse this ACPI buffer, AE_BUFFER_OVERFLOW will be triggered.
Re-initialize buffer size will make ACPI evaluate successfully.
Fixes: 46445b6b89 ("thinkpad-acpi: fix handle locate for video and query of _BCL")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8169bd3e6e upstream.
2 recent commits:
cfae58ed68 ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE
on the 9 / "Laptop" chasis-type")
1fac39fd03 ("platform/x86: intel-vbtn: Also handle tablet-mode switch on
"Detachable" and "Portable" chassis-types")
Enabled reporting of SW_TABLET_MODE on more devices since the vbtn ACPI
interface is used by the firmware on some of those devices to report this.
Testing has shown that unconditionally enabling SW_TABLET_MODE reporting
on all devices with a chassis type of 8 ("Portable") or 10 ("Notebook")
which support the VGBS method is a very bad idea.
Many of these devices are normal laptops (non 2-in-1) models with a VGBS
which always returns 0, which we translate to SW_TABLET_MODE=1. This in
turn causes userspace (libinput) to suppress events from the builtin
keyboard and touchpad, making the laptop essentially unusable.
Since the problem of wrongly reporting SW_TABLET_MODE=1 in combination
with libinput, leads to a non-usable system. Where as OTOH many people will
not even notice when SW_TABLET_MODE is not being reported, this commit
changes intel_vbtn_has_switches() to use a DMI based allow-list.
The new DMI based allow-list matches on the 31 ("Convertible") and
32 ("Detachable") chassis-types, as these clearly are 2-in-1s and
so far if they support the intel-vbtn ACPI interface they all have
properly working SW_TABLET_MODE reporting.
Besides these 2 generic matches, it also contains model specific matches
for 2-in-1 models which use a different chassis-type and which are known
to have properly working SW_TABLET_MODE reporting.
This has been tested on the following 2-in-1 devices:
Dell Venue 11 Pro 7130 vPro
HP Pavilion X2 10-p002nd
HP Stream x360 Convertible PC 11
Medion E1239T
Fixes: cfae58ed68 ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type")
BugLink: https://forum.manjaro.org/t/keyboard-and-touchpad-only-work-on-kernel-5-6/22668
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175599
Cc: Barnabás Pőcze <pobrn@protonmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f38b06db8 upstream.
clang static analysis flags this represenative problem
thinkpad_acpi.c:2523:7: warning: Branch condition evaluates
to a garbage value
if (!oldn->mute ||
^~~~~~~~~~~
In hotkey_kthread() mute is conditionally set by hotkey_read_nvram()
but unconditionally checked by hotkey_compare_and_issue_event().
So the tp_nvram_state variable s[2] needs to be initialized.
Fixes: 01e88f2598 ("ACPI: thinkpad-acpi: add CMOS NVRAM polling for hot keys (v9)")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: mark gross <mgross@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d823346876 upstream.
Commit cfae58ed68 ("platform/x86: intel-vbtn: Only blacklist
SW_TABLET_MODE on the 9 / "Laptop" chasis-type") restored SW_TABLET_MODE
reporting on the HP stream x360 11 series on which it was previously broken
by commit de9647efea ("platform/x86: intel-vbtn: Only activate tablet
mode switch on 2-in-1's").
It turns out that enabling SW_TABLET_MODE reporting on devices with a
chassis-type of 10 ("Notebook") causes SW_TABLET_MODE to always report 1
at boot on the HP Pavilion 11 x360, which causes libinput to disable the
kbd and touchpad.
The HP Pavilion 11 x360's ACPI VGBS method sets bit 4 instead of bit 6 when
NOT in tablet mode at boot. Inspecting all the DSDTs in my DSDT collection
shows only one other model, the Medion E1239T ever setting bit 4 and it
always sets this together with bit 6.
So lets treat bit 4 as a second bit which when set indicates the device not
being in tablet-mode, as we already do for bit 6.
While at it also prefix all VGBS constant defines with "VGBS_".
Fixes: cfae58ed68 ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4013c1496c upstream.
Kernel threads intentionally do CLONE_FS in order to follow any changes
that 'init' does to set up the root directory (or cwd).
It is admittedly a bit odd, but it avoids the situation where 'init'
does some extensive setup to initialize the system environment, and then
we execute a usermode helper program, and it uses the original FS setup
from boot time that may be very limited and incomplete.
[ Both Al Viro and Eric Biederman point out that 'pivot_root()' will
follow the root regardless, since it fixes up other users of root (see
chroot_fs_refs() for details), but overmounting root and doing a
chroot() would not. ]
However, Vegard Nossum noticed that the CLONE_FS not only means that we
follow the root and current working directories, it also means we share
umask with whatever init changed it to. That wasn't intentional.
Just reset umask to the original default (0022) before actually starting
the usermode helper program.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we queue work in io_poll_wake(), it will leads to list double
add. So we should add the list when the callback func is the
io_sq_wq_submit_work.
The following oops was seen:
list_add double add: new=ffff9ca6a8f1b0e0, prev=ffff9ca62001cee8,
next=ffff9ca6a8f1b0e0.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:31!
Call Trace:
<IRQ>
io_poll_wake+0xf3/0x230
__wake_up_common+0x91/0x170
__wake_up_common_lock+0x7a/0xc0
io_commit_cqring+0xea/0x280
? blkcg_iolatency_done_bio+0x2b/0x610
io_cqring_add_event+0x3e/0x60
io_complete_rw+0x58/0x80
dio_complete+0x106/0x250
blk_update_request+0xa0/0x3b0
blk_mq_end_request+0x1a/0x110
blk_mq_complete_request+0xd0/0xe0
nvme_irq+0x129/0x270 [nvme]
__handle_irq_event_percpu+0x7b/0x190
handle_irq_event_percpu+0x30/0x80
handle_irq_event+0x3c/0x60
handle_edge_irq+0x91/0x1e0
do_IRQ+0x4d/0xd0
common_interrupt+0xf/0xf
Fixes: 1c4404efcf ("io_uring: make sure async workqueue is canceled on exit")
Reported-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the process 0 has been initialized io_uring is complete, and
then fork process 1. If process 1 exits and it leads to delete
all reqs from the task_list. If we kill process 0. We will not
send SIGINT signal to the kworker. So we can not remove the req
from the task_list. The io_sq_wq_submit_work() can do that for
us.
Fixes: 1c4404efcf ("io_uring: make sure async workqueue is canceled on exit")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The store to req->flags and load req->work_task should not be
reordering in io_cancel_async_work(). We should make sure that
either we store REQ_F_CANCE flag to req->flags or we see the
req->work_task setted in io_sq_wq_submit_work().
Fixes: 1c4404efcf ("io_uring: make sure async workqueue is canceled on exit")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit
1c4404efcf2c0> ("<io_uring: make sure async workqueue is canceled on exit>")
doesn't solve the resource leak problem totally! When kworker is doing a
io task for the io_uring, The process which submitted the io task has
received a SIGKILL signal from the user. Then the io_cancel_async_work
function could have sent a SIGINT signal to the kworker, but the judging
condition is wrong. So it doesn't send a SIGINT signal to the kworker,
then caused the resource leaking problem.
Why the juding condition is wrong? The process is a multi-threaded process,
we call the thread of the process which has submitted the io task Thread1.
So the req->task is the current macro of the Thread1. when all the threads
of the process have done exit procedure, the last thread will call the
io_cancel_async_work, but the last thread may not the Thread1, so the task
is not equal and doesn't send the SIGINT signal. To fix this bug, we alter
the task attribute of the req with struct files_struct. And check the files
instead.
Fixes: 1c4404efcf ("io_uring: make sure async workqueue is canceled on exit")
Signed-off-by: Yinyin Zhu <zhuyinyin@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77972b55fb upstream.
This reverts commit 1838d6c62f.
This commit moved the ravb_mdio_init() call (and thus the
of_mdiobus_register() call) from the ravb_probe() to the ravb_open()
call. This causes a regression during system resume (s2idle/s2ram), as
new PHY devices cannot be bound while suspended.
During boot, the Micrel PHY is detected like this:
Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=228)
ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
During system suspend, (A) defer_all_probes is set to true, and (B)
usermodehelper_disabled is set to UMH_DISABLED, to avoid drivers being
probed while suspended.
A. If CONFIG_MODULES=n, phy_device_register() calling device_add()
merely adds the device, but does not probe it yet, as
really_probe() returns early due to defer_all_probes being set:
dpm_resume+0x128/0x4f8
device_resume+0xcc/0x1b0
dpm_run_callback+0x74/0x340
ravb_resume+0x190/0x1b8
ravb_open+0x84/0x770
of_mdiobus_register+0x1e0/0x468
of_mdiobus_register_phy+0x1b8/0x250
of_mdiobus_phy_device_register+0x178/0x1e8
phy_device_register+0x114/0x1b8
device_add+0x3d4/0x798
bus_probe_device+0x98/0xa0
device_initial_probe+0x10/0x18
__device_attach+0xe4/0x140
bus_for_each_drv+0x64/0xc8
__device_attach_driver+0xb8/0xe0
driver_probe_device.part.11+0xc4/0xd8
really_probe+0x32c/0x3b8
Later, phy_attach_direct() notices no PHY driver has been bound,
and falls back to the Generic PHY, leading to degraded operation:
Generic PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=POLL)
ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
B. If CONFIG_MODULES=y, request_module() returns early with -EBUSY due
to UMH_DISABLED, and MDIO initialization fails completely:
mdio_bus e6800000.ethernet-ffffffff:00: error -16 loading PHY driver module for ID 0x00221622
ravb e6800000.ethernet eth0: failed to initialize MDIO
PM: dpm_run_callback(): ravb_resume+0x0/0x1b8 returns -16
PM: Device e6800000.ethernet failed to resume: error -16
Ignoring -EBUSY in phy_request_driver_module(), like was done for
-ENOENT in commit 21e194425a ("net: phy: fix issue with loading
PHY driver w/o initramfs"), would makes it fall back to the Generic
PHY, like in the CONFIG_MODULES=n case.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6735b4632d upstream.
syzbot has reported an issue in the framebuffer layer, where a malicious
user may overflow our built-in font data buffers.
In order to perform a reliable range check, subsystems need to know
`FONTDATAMAX` for each built-in font. Unfortunately, our font descriptor,
`struct console_font` does not contain `FONTDATAMAX`, and is part of the
UAPI, making it infeasible to modify it.
For user-provided fonts, the framebuffer layer resolves this issue by
reserving four extra words at the beginning of data buffers. Later,
whenever a function needs to access them, it simply uses the following
macros:
Recently we have gathered all the above macros to <linux/font.h>. Let us
do the same thing for built-in fonts, prepend four extra words (including
`FONTDATAMAX`) to their data buffers, so that subsystems can use these
macros for all fonts, no matter built-in or user-provided.
This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS
macros into linux/font.h".
Cc: stable@vger.kernel.org
Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/ef18af00c35fb3cc826048a5f70924ed6ddce95b.1600953813.git.yepeilin.cs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fsm-demo demonstrates the usage of the gpio-fsm driver. It is
designed to be used with a set of "traffic light" LEDs on GPIOs
7, 8 and 25.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
The gpio-fsm driver implements simple state machines that allow GPIOs
to be controlled in response to inputs from other GPIOs - real and
soft/virtual - and time delays. It can:
+ create dummy GPIOs for drivers that demand them,
+ drive multiple GPIOs from a single input, with optional delays,
+ add a debounce circuit to an input,
+ drive pattern sequences onto LEDs
etc.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
V4L2_PIX_FMT_BGR32 is deprecated as it is ambiguous over where
the alpha byte is.
Swap to the newer V4L2_PIX_FMT_BGRX32 format.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
commit 1cc5ef91d2 upstream.
The indexes to the nf_nat_l[34]protos arrays come from userspace. So
check the tuple's family, e.g. l3num, when creating the conntrack in
order to prevent an OOB memory access during setup. Here is an example
kernel panic on 4.14.180 when userspace passes in an index greater than
NFPROTO_NUMPROTO.
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:...
Process poc (pid: 5614, stack limit = 0x00000000a3933121)
CPU: 4 PID: 5614 Comm: poc Tainted: G S W O 4.14.180-g051355490483
Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM
task: 000000002a3dfffe task.stack: 00000000a3933121
pc : __cfi_check_fail+0x1c/0x24
lr : __cfi_check_fail+0x1c/0x24
...
Call trace:
__cfi_check_fail+0x1c/0x24
name_to_dev_t+0x0/0x468
nfnetlink_parse_nat_setup+0x234/0x258
ctnetlink_parse_nat_setup+0x4c/0x228
ctnetlink_new_conntrack+0x590/0xc40
nfnetlink_rcv_msg+0x31c/0x4d4
netlink_rcv_skb+0x100/0x184
nfnetlink_rcv+0xf4/0x180
netlink_unicast+0x360/0x770
netlink_sendmsg+0x5a0/0x6a4
___sys_sendmsg+0x314/0x46c
SyS_sendmsg+0xb4/0x108
el0_svc_naked+0x34/0x38
This crash is not happening since 5.4+, however, ctnetlink still
allows for creating entries with unsupported layer 3 protocol number.
Fixes: c1d10adb4a ("[NETFILTER]: Add ctnetlink port for nf_conntrack")
Signed-off-by: Will McVicker <willmcvicker@google.com>
[pablo@netfilter.org: rebased original patch on top of nf.git]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe0a916c1e upstream.
Checking for the lack of epitems refering to the epoll we want to insert into
is not enough; we might have an insertion of that epoll into another one that
has already collected the set of files to recheck for excessive reverse paths,
but hasn't gotten to creating/inserting the epitem for it.
However, any such insertion in progress can be detected - it will update the
generation count in our epoll when it's done looking through it for files
to check. That gets done under ->mtx of our epoll and that allows us to
detect that safely.
We are *not* holding epmutex here, so the generation count is not stable.
However, since both the update of ep->gen by loop check and (later)
insertion into ->f_ep_link are done with ep->mtx held, we are fine -
the sequence is
grab epmutex
bump loop_check_gen
...
grab tep->mtx // 1
tep->gen = loop_check_gen
...
drop tep->mtx // 2
...
grab tep->mtx // 3
...
insert into ->f_ep_link
...
drop tep->mtx // 4
bump loop_check_gen
drop epmutex
and if the fastpath check in another thread happens for that
eventpoll, it can come
* before (1) - in that case fastpath is just fine
* after (4) - we'll see non-empty ->f_ep_link, slow path
taken
* between (2) and (3) - loop_check_gen is stable,
with ->mtx providing barriers and we end up taking slow path.
Note that ->f_ep_link emptiness check is slightly racy - we are protected
against insertions into that list, but removals can happen right under us.
Not a problem - in the worst case we'll end up taking a slow path for
no good reason.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38adf94e16 upstream.
Move the quirked chunk_sectors setting to the same location as noiob so
one place registers this setting. And since the noiob value is only used
locally, remove the member from struct nvme_ns.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f85086f95f upstream.
In register_mem_sect_under_node() the system_state's value is checked to
detect whether the call is made during boot time or during an hot-plug
operation. Unfortunately, that check against SYSTEM_BOOTING is wrong
because regular memory is registered at SYSTEM_SCHEDULING state. In
addition, memory hot-plug operation can be triggered at this system
state by the ACPI [1]. So checking against the system state is not
enough.
The consequence is that on system with interleaved node's ranges like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
This can be seen on PowerPC LPAR after multiple memory hot-plug and
hot-unplug operations are done. At the next reboot the node's memory
ranges can be interleaved and since the call to link_mem_sections() is
made in topology_init() while the system is in the SYSTEM_SCHEDULING
state, the node's id is not checked, and the sections registered to
multiple nodes:
$ ls -l /sys/devices/system/memory/memory21/node*
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
In that case, the system is able to boot but if later one of theses
memory blocks is hot-unplugged and then hot-plugged, the sysfs
inconsistency is detected and this is triggering a BUG_ON():
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This patch addresses the root cause by not relying on the system_state
value to detect whether the call is due to a hot-plug operation. An
extra parameter is added to link_mem_sections() detailing whether the
operation is due to a hot-plug operation.
[1] According to Oscar Salvador, using this qemu command line, ACPI
memory hotplug operations are raised at SYSTEM_SCHEDULING state:
$QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \
-m size=$MEM,slots=255,maxmem=4294967296k \
-numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \
-object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \
-object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \
-object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \
-object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \
-object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \
-object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \
-object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \
Fixes: 4fbce63391 ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1d0da8335 upstream.
Patch series "mm: fix memory to node bad links in sysfs", v3.
Sometimes, firmware may expose interleaved memory layout like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
In that case, we can see memory blocks assigned to multiple nodes in
sysfs:
$ ls -l /sys/devices/system/memory/memory21
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
-rw-r--r-- 1 root root 65536 Aug 24 05:27 online
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index
drwxr-xr-x 2 root root 0 Aug 24 05:27 power
-r--r--r-- 1 root root 65536 Aug 24 05:27 removable
-rw-r--r-- 1 root root 65536 Aug 24 05:27 state
lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory
-rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent
-r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones
The same applies in the node's directory with a memory21 link in both
the node1 and node2's directory.
This is wrong but doesn't prevent the system to run. However when
later, one of these memory blocks is hot-unplugged and then hot-plugged,
the system is detecting an inconsistency in the sysfs layout and a
BUG_ON() is raised:
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This has been seen on PowerPC LPAR.
The root cause of this issue is that when node's memory is registered,
the range used can overlap another node's range, thus the memory block
is registered to multiple nodes in sysfs.
There are two issues here:
(a) The sysfs memory and node's layouts are broken due to these
multiple links
(b) The link errors in link_mem_sections() should not lead to a system
panic.
To address (a) register_mem_sect_under_node should not rely on the
system state to detect whether the link operation is triggered by a hot
plug operation or not. This is addressed by the patches 1 and 2 of this
series.
Issue (b) will be addressed separately.
This patch (of 2):
The memmap_context enum is used to detect whether a memory operation is
due to a hot-add operation or happening at boot time.
Make it general to the hotplug operation and rename it as
meminit_context.
There is no functional change introduced by this patch
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com
Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b8bd42361 upstream.
Currently io_ticks is approximated by adding one at each start and end of
requests if jiffies counter has changed. This works perfectly for requests
shorter than a jiffy or if one of requests starts/ends at each jiffy.
If disk executes just one request at a time and they are longer than two
jiffies then only first and last jiffies will be accounted.
Fix is simple: at the end of request add up into io_ticks jiffies passed
since last update rather than just one jiffy.
Example: common HDD executes random read 4k requests around 12ms.
fio --name=test --filename=/dev/sdb --rw=randread --direct=1 --runtime=30 &
iostat -x 10 sdb
Note changes of iostat's "%util" 8,43% -> 99,99% before/after patch:
Before:
Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
sdb 0,00 0,00 82,60 0,00 330,40 0,00 8,00 0,96 12,09 12,09 0,00 1,02 8,43
After:
Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
sdb 0,00 0,00 82,50 0,00 330,00 0,00 8,00 1,00 12,10 12,10 0,00 12,12 99,99
Now io_ticks does not loose time between start and end of requests, but
for queue-depth > 1 some I/O time between adjacent starts might be lost.
For load estimation "%util" is not as useful as average queue length,
but it clearly shows how often disk queue is completely empty.
Fixes: 5b18b5a737 ("block: delete part_round_stats and switch to less precise counting")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
From: "Banerjee, Debabrata" <dbanerje@akamai.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 09a6b0bc3b ]
Commit f227e3ec3b ("random32: update the net random state on interrupt
and activity") broke compilation and was temporarily fixed by Linus in
83bdc7275e ("random32: remove net_rand_state from the latent entropy
gcc plugin") by entirely moving net_rand_state out of the things handled
by the latent_entropy GCC plugin.
From what I understand when reading the plugin code, using the
__latent_entropy attribute on a declaration was the wrong part and
simply keeping the __latent_entropy attribute on the variable definition
was the correct fix.
Fixes: 83bdc7275e ("random32: remove net_rand_state from the latent entropy gcc plugin")
Acked-by: Willy Tarreau <w@1wt.eu>
Cc: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efe84d408b ]
When building with
$ HOST_EXTRACFLAGS=-g make
the expectation is that host tools are built with debug informations.
This however doesn't happen if the Makefile assigns a new value to the
HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for
the first assignment.
Fixes: e3fd9b5384 ("scripts/dtc: consolidate include path options in Makefile")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2bd970aa6 ]
the i2c_ram structure is missing the sdmatmp field mentionned in
datasheet for MPC8272 at paragraph 36.5. With this field missing, the
hardware would write past the allocated memory done through
cpm_muram_alloc for the i2c_ram structure and land in memory allocated
for the buffers descriptors corrupting the cbd_bufaddr field. Since this
field is only set during setup(), the first i2c transaction would work
and the following would send data read from an arbitrary memory
location.
Fixes: 61045dbe9d ("i2c: Add support for I2C bus on Freescale CPM1/CPM2 controllers")
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e640b1eec ]
GPIO_U is mapped to the least significant byte of input/output mask, and
the byte in "output" mask should be 0 because GPIO_U is input only. All
the other bits need to be 1 because GPIO_V/W/X support both input and
output modes.
Similarly, GPIO_Y/Z are mapped to the 2 least significant bytes, and the
according bits need to be 1 because GPIO_Y/Z support both input and
output modes.
Fixes: ab4a85534c ("gpio: aspeed: Add in ast2600 details to Aspeed driver")
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf0d394e88 ]
Currently, the IRQ setup for the SGPIO driver enables all interrupts in
dual-edge trigger mode. Since the default handler is handle_bad_irq, any
state change on input GPIOs will trigger bad IRQ warnings.
This change applies sensible IRQ defaults: single-edge trigger, and all
IRQs disabled.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Fixes: 7db47faae7 ("gpio: aspeed: Add SGPIO driver")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac67b07e26 ]
Currently, the aspeed-sgpio driver exposes up to 80 GPIO lines,
corresponding to the 80 status bits available in hardware. Each of these
lines can be configured as either an input or an output.
However, each of these GPIOs is actually an input *and* an output; we
actually have 80 inputs plus 80 outputs.
This change expands the maximum number of GPIOs to 160; the lower half
of this range are the input-only GPIOs, the upper half are the outputs.
We fix the GPIO directions to correspond to this mapping.
This also fixes a bug when setting GPIOs - we were reading from the
input register, making it impossible to set more than one output GPIO.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Fixes: 7db47faae7 ("gpio: aspeed: Add SGPIO driver")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3bb0f796f ]
The ChipID IO region has it's own clock, which is being disabled while
scanning for unused clocks. It turned out that some CPU hotplug, CPU idle
or even SOC firmware code depends on the reads from that area. Fix the
mysterious hang caused by entering deep CPU idle state by ignoring the
'chipid' clock during unused clocks scan, as there are no direct clients
for it which will keep it enabled.
Fixes: e062b57177 ("clk: exynos4: register clocks using common clock framework")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200922124046.10496-1-m.szyprowski@samsung.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5105660ee8 ]
Commit bff1cef5f2 ("clk: tegra: Don't enable already enabled PLLs")
added checks to avoid enabling PLLs that have already been enabled by
the bootloader. However, the PLL_E configuration inherited from the
bootloader isn't necessarily the one that is needed for the kernel.
This can cause SATA to fail like this:
[ 5.310270] phy phy-sata.6: phy poweron failed --> -110
[ 5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110
[ 5.323022] tegra-ahci: probe of 70027000.sata failed with error -110
Fix this by always programming the PLL_E. This ensures that any mis-
configuration by the bootloader will be overwritten by the kernel.
Fixes: bff1cef5f2 ("clk: tegra: Don't enable already enabled PLLs")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Tested-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d33030e2ee ]
nfs_readdir_page_filler() iterates over entries in a directory, reusing
the same security label buffer, but does not reset the buffer's length.
This causes decode_attr_security_label() to return -ERANGE if an entry's
security label is longer than the previous one's. This error, in
nfs4_decode_dirent(), only gets passed up as -EAGAIN, which causes another
failed attempt to copy into the buffer. The second error is ignored and
the remaining entries do not show up in ls, specifically the getdents64()
syscall.
Reproduce by creating multiple files in NFS and giving one of the later
files a longer security label. ls will not see that file nor any that are
added afterwards, though they will exist on the backend.
In nfs_readdir_page_filler(), reset security label buffer length before
every reuse
Signed-off-by: Jeffrey Mitchell <jeffrey.mitchell@starlab.io>
Fixes: b4487b9354 ("nfs: Fix getxattr kernel panic and memory overflow")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fcface659 ]
The raw interrupt status of GPIO maybe set before the interrupt is enabled,
which would trigger the interrupt event once enabled it from user side.
This is the case for edge interrupts only. Adding a clear operation when
setting interrupt type can avoid that.
There're a few considerations for the solution:
1) This issue is for edge interrupt only; The interrupts requested by users
are IRQ_TYPE_LEVEL_HIGH as default, so clearing interrupt when request
is useless.
2) The interrupt type can be set to edge when request and following up
with clearing it though, but the problem is still there once users set
the interrupt type to level trggier.
3) We can add a clear operation after each time of setting interrupt
enable bit, but it is redundant for level trigger interrupt.
Therefore, the solution is this patch seems the best for now.
Fixes: 9a3821c2bb ("gpio: Add GPIO driver for Spreadtrum SC9860 platform")
Signed-off-by: Taiping Lai <taiping.lai@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e0e8dac98 ]
The lldd may have made calls to delete a remote port or local port and
the delete is in progress when the cli then attempts to create a new
controller. Currently, this proceeds without error although it can't be
very successful.
Fix this by validating that both the host port and remote port are
present when a new controller is to be created.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50b7c24390 ]
Currently, we use nvmeq->q_depth as the upper limit for a valid tag in
nvme_handle_cqe(), it is not correct. Because the available tag number
is recorded in tagset, which is not equal to nvmeq->q_depth.
The nvme driver registers interrupts for queues before initializing the
tagset, because it uses the number of successful request_irq() calls to
configure the tagset parameters. This allows a race condition with the
current tag validity check if the controller happens to produce an
interrupt with a corrupted CQE before the tagset is initialized.
Replace the driver's indirect tag check with the one already provided by
the block layer.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72f04da48a ]
It would seem none of the kernel continuous integration does this:
$ cd tools/io_uring
$ make
Otherwise it may have noticed:
cc -Wall -Wextra -g -D_GNU_SOURCE -c -o io_uring-bench.o
io_uring-bench.c
io_uring-bench.c:133:12: error: static declaration of ‘gettid’
follows non-static declaration
133 | static int gettid(void)
| ^~~~~~
In file included from /usr/include/unistd.h:1170,
from io_uring-bench.c:27:
/usr/include/x86_64-linux-gnu/bits/unistd_ext.h:34:16: note:
previous declaration of ‘gettid’ was here
34 | extern __pid_t gettid (void) __THROW;
| ^~~~~~
make: *** [<builtin>: io_uring-bench.o] Error 1
The problem on Ubuntu 20.04 (with lk 5.9.0-rc5) is that unistd.h
already defines gettid(). So prefix the local definition with
"lk_".
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 795d6379a4 ]
For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to
4194304. During boot the kernel sets a new value based on number of CPUs
but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default
becomes 131072 which needs six digits.
This value can be increased during run time but must not exceed the
initial upper limit.
Systemd sometime after v241 sets it to the upper limit during boot. The
result is that when the pid exceeds five digits, the trace output is a
little hard to read because it is no longer properly padded (same like
on big iron with 98+ CPUs).
Increase the pid padding to seven digits.
Link: https://lkml.kernel.org/r/20200904082331.dcdkrr3bkn3e4qlg@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fb030a704 ]
This patch sets skb->protocol before transmitting frames on the HDLC
device, so that a user listening on the HDLC device with an AF_PACKET
socket will see outgoing frames' sll_protocol field correctly set and
consistent with that of incoming frames.
1. Control frames in hdlc_cisco and hdlc_ppp
When these drivers send control frames, skb->protocol is not set.
This value should be set to htons(ETH_P_HDLC), because when receiving
control frames, their skb->protocol is set to htons(ETH_P_HDLC).
When receiving, hdlc_type_trans in hdlc.h is called, which then calls
cisco_type_trans or ppp_type_trans. The skb->protocol of control frames
is set to htons(ETH_P_HDLC) so that the control frames can be received
by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the
control frames.
2. hdlc_fr
When this driver sends control frames, skb->protocol is set to internal
values used in this driver.
When this driver sends data frames (from upper stacked PVC devices),
skb->protocol is the same as that of the user data packet being sent on
the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3)
(for Ethernet-emulating PVC devices).
However, skb->protocol for both control frames and data frames should be
set to htons(ETH_P_HDLC), because when receiving, all frames received on
the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC).
When receiving, hdlc_type_trans in hdlc.h is called, and because this
driver doesn't provide a type_trans function in struct hdlc_proto,
all frames will have their skb->protocol set to htons(ETH_P_HDLC).
The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx
to process the frames (control frames are consumed and data frames
are re-received on upper PVC devices).
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83f9a9c8c1 ]
This driver is a virtual driver stacked on top of Ethernet interfaces.
When this driver transmits data on the Ethernet device, the skb->protocol
setting is inconsistent with the Ethernet header prepended to the skb.
This causes a user listening on the Ethernet interface with an AF_PACKET
socket, to see different sll_protocol values for incoming and outgoing
frames, because incoming frames would have this value set by parsing the
Ethernet header.
This patch changes the skb->protocol value for outgoing Ethernet frames,
making it consistent with the Ethernet header prepended. This makes a
user listening on the Ethernet device with an AF_PACKET socket, to see
the same sll_protocol value for incoming and outgoing frames.
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 933a3752ba ]
the callers rely upon having any iov_iter_truncate() done inside
->direct_IO() countered by iov_iter_reexpand().
Reported-by: Qian Cai <cai@redhat.com>
Tested-by: Qian Cai <cai@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4202c9fdf0 ]
Some WinCE devices face connectivity issues via the NDIS interface. They
fail to register, resulting in -110 timeout errors and failures during the
probe procedure.
In this kind of WinCE devices, the Windows-side ndis driver needs quite
more time to be loaded and configured, so that the linux rndis host queries
to them fail to be responded correctly on time.
More specifically, when INIT is called on the WinCE side - no other
requests can be served by the Client and this results in a failed QUERY
afterwards.
The increase of the waiting time on the side of the linux rndis host in
the command-response loop leaves the INIT process to complete and respond
to a QUERY, which comes afterwards. The WinCE devices with this special
"feature" in their ndis driver are satisfied by this fix.
Signed-off-by: Olympia Giannou <olympia.giannou@leica-geosystems.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee460417d2 ]
Increase Rx ring size to address issue where hardware is reaching
the receive work limit.
Before:
[ 102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached
Signed-off-by: Lucy Yan <lucyyan@google.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44a049c426 ]
PVC devices are virtual devices in this driver stacked on top of the
actual HDLC device. They are the devices normal users would use.
PVC devices have two types: normal PVC devices and Ethernet-emulating
PVC devices.
When transmitting data with PVC devices, the ndo_start_xmit function
will prepend a header of 4 or 10 bytes. Currently this driver requests
this headroom to be reserved for normal PVC devices by setting their
hard_header_len to 10. However, this does not work when these devices
are used with AF_PACKET/RAW sockets. Also, this driver does not request
this headroom for Ethernet-emulating PVC devices (but deals with this
problem by reallocating the skb when needed, which is not optimal).
This patch replaces hard_header_len with needed_headroom, and set
needed_headroom for Ethernet-emulating PVC devices, too. This makes
the driver to request headroom for all PVC devices in all cases.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a39d0d7bdf upstream.
A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.
Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: e008fa6fb4 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: stable@vger.kernel.org
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b40341fad6 upstream.
The first thing that the ftrace function callback helper functions should do
is to check for recursion. Peter Zijlstra found that when
"rcu_is_watching()" had its notrace removed, it caused perf function tracing
to crash. This is because the call of rcu_is_watching() is tested before
function recursion is checked and and if it is traced, it will cause an
infinite recursion loop.
rcu_is_watching() should still stay notrace, but to prevent this should
never had crashed in the first place. The recursion prevention must be the
first thing done in callback functions.
Link: https://lore.kernel.org/r/20200929112541.GM2628@hirez.programming.kicks-ass.net
Cc: stable@vger.kernel.org
Cc: Paul McKenney <paulmck@kernel.org>
Fixes: c68c0fa293 ("ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A bug existed in the XFS reflink code between v5.1 and v5.5 in which
the mapping for a COW IO was not trimmed to the mapping of the COW
extent that was found. This resulted in a too-short copy, and
corruption of other files which shared the original extent.
(This happened only when extent size hints were set, which bypasses
delalloc and led to this code path.)
This was (inadvertently) fixed upstream with
36adcbace2 "xfs: fill out the srcmap in iomap_begin"
and related patches which moved lots of this functionality to
the iomap subsystem.
Hence, this is a -stable only patch, targeted to fix this
corruption vector without other major code changes.
Fixes: 78f0cc9d55 ("xfs: don't use delalloc extents for COW on files with extsize hints")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df12eb6d6c ]
Whenever the vsock backend on the host sends a packet through the RX
queue, it expects an answer on the TX queue. Unfortunately, there is one
case where the host side will hang waiting for the answer and might
effectively never recover if no timeout mechanism was implemented.
This issue happens when the guest side starts binding to the socket,
which insert a new bound socket into the list of already bound sockets.
At this time, we expect the guest to also start listening, which will
trigger the sk_state to move from TCP_CLOSE to TCP_LISTEN. The problem
occurs if the host side queued a RX packet and triggered an interrupt
right between the end of the binding process and the beginning of the
listening process. In this specific case, the function processing the
packet virtio_transport_recv_pkt() will find a bound socket, which means
it will hit the switch statement checking for the sk_state, but the
state won't be changed into TCP_LISTEN yet, which leads the code to pick
the default statement. This default statement will only free the buffer,
while it should also respond to the host side, by sending a packet on
its TX queue.
In order to simply fix this unfortunate chain of events, it is important
that in case the default statement is entered, and because at this stage
we know the host side is waiting for an answer, we must send back a
packet containing the operation VIRTIO_VSOCK_OP_RST.
One could say that a proper timeout mechanism on the host side will be
enough to avoid the backend to hang. But the point of this patch is to
ensure the normal use case will be provided with proper responsiveness
when it comes to establishing the connection.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c7246dc45 ]
We are going to add 'struct vsock_sock *' parameter to
virtio_transport_get_ops().
In some cases, like in the virtio_transport_reset_no_sock(),
we don't have any socket assigned to the packet received,
so we can't use the virtio_transport_get_ops().
In order to allow virtio_transport_reset_no_sock() to use the
'.send_pkt' callback from the 'vhost_transport' or 'virtio_transport',
we add the 'struct virtio_transport *' to it and to its caller:
virtio_transport_recv_pkt().
We moved the 'vhost_transport' and 'virtio_transport' definition,
to pass their address to the virtio_transport_recv_pkt().
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 214b0e1ad0 upstream.
The offset of regmap is incorrect, j * 8 is move to the
wrong register.
for example:
asume i = 0, j = 1. we want to set KPY5 as interrupt
falling edge mode, regmap[0][1] should be TC3589x_GPIOIBE1 0xcd
but, regmap[i] + j * 8 = TC3589x_GPIOIBE0 + 8 ,point to 0xd4,
this is TC3589x_GPIOIE2 not TC3589x_GPIOIBE1.
Fixes: d88b25be35 ("gpio: Add TC35892 GPIO driver")
Cc: Cc: stable@vger.kernel.org
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45ccf65567 upstream.
The gpio-siox driver uses handle_nested_irq() to implement its
interrupt support. This is only capable of handling threaded irq
actions. For a hardirq action it triggers a NULL pointer oops.
(It calls action->thread_fn which is NULL then.)
Prevent registration of a hardirq action by setting
gpio_irq_chip::threaded to true.
Cc: u.kleine-koenig@pengutronix.de
Fixes: be8c8facc7 ("gpio: new driver to work with a 8x12 siox")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b405533c2 upstream.
commit 2b74b0a04d ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()")
adds important bounds checking however it unfortunately also introduces a
bug with respect to section 3.3.1 of the NCM specification.
wDatagramIndex[1] : "Byte index, in little endian, of the second datagram
described by this NDP16. If zero, then this marks the end of the sequence
of datagrams in this NDP16."
wDatagramLength[1]: "Byte length, in little endian, of the second datagram
described by this NDP16. If zero, then this marks the end of the sequence
of datagrams in this NDP16."
wDatagramIndex[1] and wDatagramLength[1] respectively then may be zero but
that does not mean we should throw away the data referenced by
wDatagramIndex[0] and wDatagramLength[0] as is currently the case.
Breaking the loop on (index2 == 0 || dg_len2 == 0) should come at the end
as was previously the case and checks for index2 and dg_len2 should be
removed since zero is valid.
I'm not sure how much testing the above patch received but for me right now
after enumeration ping doesn't work. Reverting the commit restores ping,
scp, etc.
The extra validation associated with wDatagramIndex[0] and
wDatagramLength[0] appears to be valid so, this change removes the incorrect
restriction on wDatagramIndex[1] and wDatagramLength[1] restoring data
processing between host and device.
Fixes: 2b74b0a04d ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()")
Cc: Ilja Van Sprundel <ivansprundel@ioactive.com>
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20200920170158.1217068-1-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c8f353272 upstream.
We use a device's allocation state tree to track ranges in a device used
for allocated chunks, and we set ranges in this tree when allocating a new
chunk. However after a device replace operation, we were not setting the
allocated ranges in the new device's allocation state tree, so that tree
is empty after a device replace.
This means that a fitrim operation after a device replace will trim the
device ranges that have allocated chunks and extents, as we trim every
range for which there is not a range marked in the device's allocation
state tree. It is also important during chunk allocation, since the
device's allocation state is used to determine if a range is already
allocated when allocating a new chunk.
This is trivial to reproduce and the following script triggers the bug:
$ cat reproducer.sh
#!/bin/bash
DEV1="/dev/sdg"
DEV2="/dev/sdh"
DEV3="/dev/sdi"
wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null
# Create a raid1 test fs on 2 devices.
mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null
mount $DEV1 /mnt/btrfs
xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo
echo "Starting to replace $DEV1 with $DEV3"
btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs
echo
echo "Running fstrim"
fstrim /mnt/btrfs
echo
echo "Unmounting filesystem"
umount /mnt/btrfs
echo "Mounting filesystem in degraded mode using $DEV3 only"
wipefs -a $DEV1 $DEV2 &> /dev/null
mount -o degraded $DEV3 /mnt/btrfs
if [ $? -ne 0 ]; then
dmesg | tail
echo
echo "Failed to mount in degraded mode"
exit 1
fi
echo
echo "File foo data (expected all bytes = 0xab):"
od -A d -t x1 /mnt/btrfs/foo
umount /mnt/btrfs
When running the reproducer:
$ ./replace-test.sh
wrote 10485760/10485760 bytes at offset 0
10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec)
Starting to replace /dev/sdg with /dev/sdi
Running fstrim
Unmounting filesystem
Mounting filesystem in degraded mode using /dev/sdi only
mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error.
[19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started
[19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished
[19582.208293] BTRFS info (device sdi): allowing degraded mounts
[19582.208298] BTRFS info (device sdi): disk space caching is enabled
[19582.208301] BTRFS info (device sdi): has skinny extents
[19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing
[19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed
[19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0
[19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5
[19582.231576] BTRFS error (device sdi): open_ctree failed
Failed to mount in degraded mode
So fix by setting all allocated ranges in the replace target device when
the replace operation is finishing, when we are holding the chunk mutex
and we can not race with new chunk allocations.
A test case for fstests follows soon.
Fixes: 1c11b63eff ("btrfs: replace pending/pinned chunks lists with io tree")
CC: stable@vger.kernel.org # 5.2+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 5.4 kernel changes the way a number of display drivers use GPIOs.
That change has exposed flaws/broken a number of display overlays, so
after a trickle of single-display patches this is a best-guess attempt
to fix the remainder. As none of these changes have been tested on real
displays there is a possibility that this either doesn't fix the
problem or even breaks something that was working - apologies if that
is the case.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
commit 95364f3670 upstream.
In case a driver wants to return an error from qc_prep, return enum
ata_completion_errors. sata_mv is one of those drivers -- see the next
patch. Other drivers return the newly defined AC_ERR_OK.
[v2] use enum ata_completion_errors and AC_ERR_OK.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee1dfad532 upstream.
dm_queue_split() is removed because __split_and_process_bio() _must_
handle splitting bios to ensure proper bio submission and completion
ordering as a bio is split.
Otherwise, multiple recursive calls to ->submit_bio will cause multiple
split bios to be allocated from the same ->bio_split mempool at the same
time. This would result in deadlock in low memory conditions because no
progress could be made (only one bio is available in ->bio_split
mempool).
This fix has been verified to still fix the loss of performance, due
to excess splitting, that commit 120c9257f5 provided.
Fixes: 120c9257f5 ("Revert "dm: always call blk_queue_split() in dm_process_bio()"")
Cc: stable@vger.kernel.org # 5.0+, requires custom backport due to 5.9 changes
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4ad98e4b7 upstream.
KVM currently assumes that an instruction abort can never be a write.
This is in general true, except when the abort is triggered by
a S1PTW on instruction fetch that tries to update the S1 page tables
(to set AF, for example).
This can happen if the page tables have been paged out and brought
back in without seeing a direct write to them (they are thus marked
read only), and the fault handling code will make the PT executable(!)
instead of writable. The guest gets stuck forever.
In these conditions, the permission fault must be considered as
a write so that the Stage-1 update can take place. This is essentially
the I-side equivalent of the problem fixed by 60e21a0ef5 ("arm64: KVM:
Take S1 walks into account when determining S2 write faults").
Update kvm_is_write_fault() to return true on IABT+S1PTW, and introduce
kvm_vcpu_trap_is_exec_fault() that only return true when no faulting
on a S1 fault. Additionally, kvm_vcpu_dabt_iss1tw() is renamed to
kvm_vcpu_abt_iss1tw(), as the above makes it plain that it isn't
specific to data abort.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200915104218.1284701-2-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3f7b1bb20 upstream.
Currently to make sure that every page table entry is read just once
gup_fast walks perform READ_ONCE and pass pXd value down to the next
gup_pXd_range function by value e.g.:
static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
...
pudp = pud_offset(&p4d, addr);
This function passes a reference on that local value copy to pXd_offset,
and might get the very same pointer in return. This happens when the
level is folded (on most arches), and that pointer should not be
iterated.
On s390 due to the fact that each task might have different 5,4 or
3-level address translation and hence different levels folded the logic
is more complex and non-iteratable pointer to a local copy leads to
severe problems.
Here is an example of what happens with gup_fast on s390, for a task
with 3-level paging, crossing a 2 GB pud boundary:
// addr = 0x1007ffff000, end = 0x10080001000
static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
{
unsigned long next;
pud_t *pudp;
// pud_offset returns &p4d itself (a pointer to a value on stack)
pudp = pud_offset(&p4d, addr);
do {
// on second iteratation reading "random" stack value
pud_t pud = READ_ONCE(*pudp);
// next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390
next = pud_addr_end(addr, end);
...
} while (pudp++, addr = next, addr != end); // pudp++ iterating over stack
return 1;
}
This happens since s390 moved to common gup code with commit
d1874a0c28 ("s390/mm: make the pxd_offset functions more robust") and
commit 1a42010cdc ("s390/mm: convert to the generic
get_user_pages_fast code").
s390 tried to mimic static level folding by changing pXd_offset
primitives to always calculate top level page table offset in pgd_offset
and just return the value passed when pXd_offset has to act as folded.
What is crucial for gup_fast and what has been overlooked is that
PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly.
And the latter is not possible with dynamic folding.
To fix the issue in addition to pXd values pass original pXdp pointers
down to gup_pXd_range functions. And introduce pXd_offset_lockless
helpers, which take an additional pXd entry value parameter. This has
already been discussed in
https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1
Fixes: 1a42010cdc ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.2+]
Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4166343058 upstream.
SWP_FS is used to make swap_{read,write}page() go through the
filesystem, and it's only used for swap files over NFS. So, !SWP_FS
means non NFS for now, it could be either file backed or device backed.
Something similar goes with legacy SWP_FILE.
So in order to achieve the goal of the original patch, SWP_BLKDEV should
be used instead.
FS corruption can be observed with SSD device + XFS + fragmented
swapfile due to CONFIG_THP_SWAP=y.
I reproduced the issue with the following details:
Environment:
QEMU + upstream kernel + buildroot + NVMe (2 GB)
Kernel config:
CONFIG_BLK_DEV_NVME=y
CONFIG_THP_SWAP=y
Some reproducible steps:
mkfs.xfs -f /dev/nvme0n1
mkdir /tmp/mnt
mount /dev/nvme0n1 /tmp/mnt
bs="32k"
sz="1024m" # doesn't matter too much, I also tried 16m
xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
xfs_io -f -c "pwrite -F -S 0 -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fsync" /tmp/mnt/sw
mkswap /tmp/mnt/sw
swapon /tmp/mnt/sw
stress --vm 2 --vm-bytes 600M # doesn't matter too much as well
Symptoms:
- FS corruption (e.g. checksum failure)
- memory corruption at: 0xd2808010
- segfault
Fixes: f0eea189e8 ("mm, THP, swap: Don't allocate huge cluster for file backed swap device")
Fixes: 38d8b4e6bd ("mm, THP, swap: delay splitting THP during swap out")
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Eric Sandeen <esandeen@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200820045323.7809-1-hsiangkao@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19a508bd1a upstream.
NULL pointer dereference is observed while exporting the dmabuf but
failed to allocate the 'struct file' which results into the dropping of
the allocated dentry corresponding to this file in the dmabuf fs, which
is ending up in dma_buf_release() and accessing the uninitialzed
dentry->d_fsdata.
Call stack on 5.4 is below:
dma_buf_release+0x2c/0x254 drivers/dma-buf/dma-buf.c:88
__dentry_kill+0x294/0x31c fs/dcache.c:584
dentry_kill fs/dcache.c:673 [inline]
dput+0x250/0x380 fs/dcache.c:859
path_put+0x24/0x40 fs/namei.c:485
alloc_file_pseudo+0x1a4/0x200 fs/file_table.c:235
dma_buf_getfile drivers/dma-buf/dma-buf.c:473 [inline]
dma_buf_export+0x25c/0x3ec drivers/dma-buf/dma-buf.c:585
Fix this by checking for the valid pointer in the dentry->d_fsdata.
Fixes: 4ab59c3c63 ("dma-buf: Move dma_buf_release() from fops to dentry_ops")
Cc: <stable@vger.kernel.org> [5.7+]
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/391319/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 709192d531 upstream.
A discard request that writes zeros using the global kernel internal
ZERO_PAGE will fail for machines with more than 2GB of memory due to the
location of the ZERO_PAGE.
Fix this by using a driver owned global zero page allocated with GFP_DMA
flag set.
Fixes: 28b841b3a7 ("s390/dasd: Add discard support for FBA devices")
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46bbe5c671 upstream.
clang static analyzer reports this problem
trace_events_hist.c:3824:3: warning: Attempt to free
released memory
kfree(hist_data->attrs->var_defs.name[i]);
In parse_var_defs() if there is a problem allocating
var_defs.expr, the earlier var_defs.name is freed.
This free is duplicated by free_var_defs() which frees
the rest of the list.
Because free_var_defs() has to run anyway, remove the
second free fom parse_var_defs().
Link: https://lkml.kernel.org/r/20200907135845.15804-1-trix@redhat.com
Cc: stable@vger.kernel.org
Fixes: 30350d65ac ("tracing: Add variable support to hist triggers")
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e1b6d63d6 upstream.
LLVM implemented a recent "libcall optimization" that lowers calls to
`sprintf(dest, "%s", str)` where the return value is used to
`stpcpy(dest, str) - dest`.
This generally avoids the machinery involved in parsing format strings.
`stpcpy` is just like `strcpy` except it returns the pointer to the new
tail of `dest`. This optimization was introduced into clang-12.
Implement this so that we don't observe linkage failures due to missing
symbol definitions for `stpcpy`.
Similar to last year's fire drill with: commit 5f074f3e19
("lib/string.c: implement a basic bcmp")
The kernel is somewhere between a "freestanding" environment (no full
libc) and "hosted" environment (many symbols from libc exist with the
same type, function signature, and semantics).
As Peter Anvin notes, there's not really a great way to inform the
compiler that you're targeting a freestanding environment but would like
to opt-in to some libcall optimizations (see pr/47280 below), rather
than opt-out.
Arvind notes, -fno-builtin-* behaves slightly differently between GCC
and Clang, and Clang is missing many __builtin_* definitions, which I
consider a bug in Clang and am working on fixing.
Masahiro summarizes the subtle distinction between compilers justly:
To prevent transformation from foo() into bar(), there are two ways in
Clang to do that; -fno-builtin-foo, and -fno-builtin-bar. There is
only one in GCC; -fno-buitin-foo.
(Any difference in that behavior in Clang is likely a bug from a missing
__builtin_* definition.)
Masahiro also notes:
We want to disable optimization from foo() to bar(),
but we may still benefit from the optimization from
foo() into something else. If GCC implements the same transform, we
would run into a problem because it is not -fno-builtin-bar, but
-fno-builtin-foo that disables that optimization.
In this regard, -fno-builtin-foo would be more future-proof than
-fno-built-bar, but -fno-builtin-foo is still potentially overkill. We
may want to prevent calls from foo() being optimized into calls to
bar(), but we still may want other optimization on calls to foo().
It seems that compilers today don't quite provide the fine grain control
over which libcall optimizations pseudo-freestanding environments would
prefer.
Finally, Kees notes that this interface is unsafe, so we should not
encourage its use. As such, I've removed the declaration from any
header, but it still needs to be exported to avoid linkage errors in
modules.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Andy Lavr <andy.lavr@gmail.com>
Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200914161643.938408-1-ndesaulniers@google.com
Link: https://bugs.llvm.org/show_bug.cgi?id=47162
Link: https://bugs.llvm.org/show_bug.cgi?id=47280
Link: https://github.com/ClangBuiltLinux/linux/issues/1126
Link: https://man7.org/linux/man-pages/man3/stpcpy.3.html
Link: https://pubs.opengroup.org/onlinepubs/9699919799/functions/stpcpy.html
Link: https://reviews.llvm.org/D85963
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f74249057 upstream.
We found a Mic detection issue on many Lenovo laptops, those laptops
belong to differnt models and they have different audio design like
internal mic connects to the codec or PCH, they all have this problem,
the problem is if plugging a headset before powerup/reboot the
machine, after booting up, the headphone could be detected but Mic
couldn't. If we plug out and plug in the headset, both headphone and
Mic could be detected then.
Through debugging we found the codec on those laptops are same, it is
alc257, and if we don't disable the 3k pulldown in alc256_shutup(),
the issue will be fixed. So far there is no pop noise or power
consumption regression on those laptops after this change.
Cc: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200914065118.19238-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f04839ec4 upstream.
Initial FLOGIs are failing with the following message:
lpfc 0000:13:00.1: 1:(0):0820 FLOGI Failed (x300). BBCredit Not Supported
In a prior patch, the READ_SPARAM command was re-ordered to post after
CONFIG_LINK as the driver is expected to update the driver's copy of the
service parameters for the FLOGI payload. If the bb-credit recovery feature
is enabled, this is fine. But on adapters were bb-credit recovery isn't
enabled, it would cause the FLOGI to fail.
Fix by restoring the original command order (READ_SPARAM before
CONFIG_LINK), and after issuing CONFIG_LINK, detect bb-credit recovery
support and reissuing READ_SPARAM to obtain the updated service parameters
(effectively adding in the fix command order).
[mkp: corrected SHA]
Link: https://lore.kernel.org/r/20200911200147.110826-1-james.smart@broadcom.com
Fixes: 835214f5d5 ("scsi: lpfc: Fix broken Credit Recovery after driver load")
CC: <stable@vger.kernel.org> # v5.7+
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86a82ae0b5 upstream.
Several people reported in the kernel bugzilla that between v4.12 and v4.13
the magic which works around broken hardware and BIOSes to find the proper
timer interrupt delivery mode stopped working for some older affected
platforms which need to fall back to ExtINT delivery mode.
The reason is that the core code changed to keep track of the masked and
disabled state of an interrupt line more accurately to avoid the expensive
hardware operations.
That broke an assumption in i8259_make_irq() which invokes
disable_irq_nosync();
irq_set_chip_and_handler();
enable_irq();
Up to v4.12 this worked because enable_irq() unconditionally unmasked the
interrupt line, but after the state tracking improvements this is not
longer the case because the IO/APIC uses lazy disabling. So the line state
is unmasked which means that enable_irq() does not call into the new irq
chip to unmask it.
In principle this is a shortcoming of the core code, but it's more than
unclear whether the core code should try to reset state. At least this
cannot be done unconditionally as that would break other existing use cases
where the chip type is changed, e.g. when changing the trigger type, but
the callers expect the state to be preserved.
As the way how check_timer() is switching the delivery modes is truly
unique, the obvious fix is to simply unmask the i8259 manually after
changing the mode to ExtINT delivery and switching the irq chip to the
legacy PIC.
Note, that the fixes tag is not really precise, but identifies the commit
which broke the assumptions in the IO/APIC and i8259 code and that's the
kernel version to which this needs to be backported.
Fixes: bf22ff45be ("genirq: Avoid unnecessary low level irq function calls")
Reported-by: p_c_chan@hotmail.com
Reported-by: ecm4@mail.com
Reported-by: perdigao1@yahoo.com
Reported-by: matzes@users.sourceforge.net
Reported-by: rvelascog@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: p_c_chan@hotmail.com
Tested-by: matzes@users.sourceforge.net
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197769
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8d214c4816 ]
Reset the MMU context during kvm_set_cr4() if SMAP or PKE is toggled.
Recent commits to (correctly) not reload PDPTRs when SMAP/PKE are
toggled inadvertantly skipped the MMU context reset due to the mask
of bits that triggers PDPTR loads also being used to trigger MMU context
resets.
Fixes: 427890aff8 ("kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode")
Fixes: cb957adb4e ("kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode")
Cc: Jim Mattson <jmattson@google.com>
Cc: Peter Shier <pshier@google.com>
Cc: Oliver Upton <oupton@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200923215352.17756-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbb5a79d2f ]
Currently we wrongly set the mask of value of LDO2/4 both to the mask of
LDO2, and the LDO4 voltage configuration is left untouched. This leads
to conflict when LDO2/4 are both in use.
Fix this issue by setting different vsel_mask to both regulators.
Fixes: db4a555f7c ("regulator: axp20x: use defines for masks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Link: https://lore.kernel.org/r/20200923005142.147135-1-icenowy@aosc.io
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e393fbe6fa ]
Commit 442e14a2c5 ("MIPS: Add 1074K CPU support explicitly.") split
1074K from the 74K as an unique CPU type, while it missed to add the
'CPU_1074K' in __get_cpu_type(). So let's add it back.
Fixes: 442e14a2c5 ("MIPS: Add 1074K CPU support explicitly.")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 472eb39103 ]
clang static analysis flags this problem
hpioctl.c:513:7: warning: Branch condition evaluates to
a garbage value
if (pci.ap_mem_base[idx]) {
^~~~~~~~~~~~~~~~~~~~
If there is a failure in the middle of the memory space loop,
only some of the memory spaces need to be cleaned up.
At the error handler, idx holds the number of successful
memory spaces mapped. So rework the handler loop to use the
old idx.
There is a second problem, the memory space loop conditionally
iomaps()/sets the mem_base so it is necessay to initize pci.
Fixes: 719f82d398 ("ALSA: Add support of AudioScience ASI boards")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20200913165230.17166-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b959ba9f46 ]
When LIB80211_CRYPT_CCMP is enabled and CRYPTO is disabled, it results in unmet
direct dependencies config warning. The reason is that LIB80211_CRYPT_CCMP
selects CRYPTO_AES and CRYPTO_CCM, which are subordinate to CRYPTO. This is
reproducible with CRYPTO disabled and R8188EU enabled, where R8188EU selects
LIB80211_CRYPT_CCMP but does not select or depend on CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: a11e2f8548 ("lib80211: use crypto API ccm(aes) transform for CCMP processing")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Link: https://lore.kernel.org/r/20200909095452.3080-1-fazilyildiran@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2369e82704 ]
Scenario:
* Multicast frame send from BLA backbone gateways (multiple nodes
with their bat0 bridged together, with BLA enabled) sharing the same
LAN to nodes in the mesh
Issue:
* Nodes receive the frame multiple times on bat0 from the mesh,
once from each foreign BLA backbone gateway which shares the same LAN
with another
For multicast frames via batman-adv broadcast packets coming from the
same BLA backbone but from different backbone gateways duplicates are
currently detected via a CRC history of previously received packets.
However this CRC so far was not performed for multicast frames received
via batman-adv unicast packets. Fixing this by appyling the same check
for such packets, too.
Room for improvements in the future: Ideally we would introduce the
possibility to not only claim a client, but a complete originator, too.
This would allow us to only send a multicast-in-unicast packet from a BLA
backbone gateway claiming the node and by that avoid potential redundant
transmissions in the first place.
Fixes: 279e89b228 ("batman-adv: add broadcast duplicate check")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74c09b7275 ]
Scenario:
* Multicast frame send from mesh to a BLA backbone (multiple nodes
with their bat0 bridged together, with BLA enabled)
Issue:
* BLA backbone nodes receive the frame multiple times on bat0,
once from mesh->bat0 and once from each backbone_gw from LAN
For unicast, a node will send only to the best backbone gateway
according to the TQ. However for multicast we currently cannot determine
if multiple destination nodes share the same backbone if they don't share
the same backbone with us. So we need to keep sending the unicasts to
all backbone gateways and let the backbone gateways decide which one
will forward the frame. We can use the CLAIM mechanism to make this
decision.
One catch: The batman-adv gateway feature for DHCP packets potentially
sends multicast packets in the same batman-adv unicast header as the
multicast optimizations code. And we are not allowed to drop those even
if we did not claim the source address of the sender, as for such
packets there is only this one multicast-in-unicast packet.
How can we distinguish the two cases?
The gateway feature uses a batman-adv unicast 4 address header. While
the multicast-to-unicasts feature uses a simple, 3 address batman-adv
unicast header. So let's use this to distinguish.
Fixes: fe2da6ff27 ("batman-adv: check incoming packet type for bla")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3236d215ad ]
Scenario:
* Multicast frame send from a BLA backbone (multiple nodes with
their bat0 bridged together, with BLA enabled)
Issue:
* BLA backbone nodes receive the frame multiple times on bat0
For multicast frames received via batman-adv broadcast packets the
originator of the broadcast packet is checked before decapsulating and
forwarding the frame to bat0 (batadv_bla_is_backbone_gw()->
batadv_recv_bcast_packet()). If it came from a node which shares the
same BLA backbone with us then it is not forwarded to bat0 to avoid a
loop.
When sending a multicast frame in a non-4-address batman-adv unicast
packet we are currently missing this check - and cannot do so because
the batman-adv unicast packet has no originator address field.
However, we can simply fix this on the sender side by only sending the
multicast frame via unicasts to interested nodes which do not share the
same BLA backbone with us. This also nicely avoids some unnecessary
transmissions on mesh side.
Note that no infinite loop was observed, probably because of dropping
via batadv_interface_tx()->batadv_bla_tx(). However the duplicates still
utterly confuse switches/bridges, ICMPv6 duplicate address detection and
neighbor discovery and therefore leads to long delays before being able
to establish TCP connections, for instance. And it also leads to the Linux
bridge printing messages like:
"br-lan: received packet on eth1 with own address as source address ..."
Fixes: 2d3f6ccc4e ("batman-adv: Modified forwarding behaviour for multicast packets")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af5ad17854 ]
When NVME_TCP is enabled and CRYPTO is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for CRYPTO_CRC32C
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- NVME_TCP [=y] && INET [=y] && BLK_DEV_NVME [=y]
The reason is that NVME_TCP selects CRYPTO_CRC32C without depending on or
selecting CRYPTO while CRYPTO_CRC32C is subordinate to CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: 79fd751d61 ("nvme: tcp: selects CRYPTO_CRC32C for nvme-tcp")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bba9dab86 ]
The fix for receiving (internally generated) bla packets outside the
interrupt context introduced the usage of in_interrupt(). But this
functionality is only defined in linux/preempt.h which was not included
with the same patch.
Fixes: 279e89b228 ("batman-adv: bla: use netif_rx_ni when not in interrupt context")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6a18d3611 ]
Bryce reported that he saw the following with:
0: r6 = r1
1: r1 = 12
2: r0 = *(u16 *)skb[r1]
The xlated sequence was incorrectly clobbering r2 with pointer
value of r6 ...
0: (bf) r6 = r1
1: (b7) r1 = 12
2: (bf) r1 = r6
3: (bf) r2 = r1
4: (85) call bpf_skb_load_helper_16_no_cache#7692160
... and hence call to the load helper never succeeded given the
offset was too high. Fix it by reordering the load of r6 to r1.
Other than that the insn has similar calling convention than BPF
helpers, that is, r0 - r5 are scratch regs, so nothing else
affected after the insn.
Fixes: e0cea7ce98 ("bpf: implement ld_abs/ld_ind in native bpf")
Reported-by: Bryce Kahle <bryce.kahle@datadoghq.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/cace836e4d07bb63b1a53e49c5dfb238a040c298.1599512096.git.daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 526e81b990 ]
The openvswitch module fails initialization when used in a kernel
without IPv6 enabled. nf_conncount_init() fails because the ct code
unconditionally tries to initialize the netns IPv6 related bit,
regardless of the build option. The change below ignores the IPv6
part if not enabled.
Note that the corresponding _put() function already has this IPv6
configuration check.
Fixes: 11efd5cb04 ("openvswitch: Support conntrack zone limit")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dda5b3384 ]
The unicast packet rerouting code makes several assumptions. For
instance it assumes that there is always exactly one destination in the
TT. This breaks for multicast frames in a unicast packets in several ways:
For one thing if there is actually no TT entry and the destination node
was selected due to the multicast tvlv flags it announced. Then an
intermediate node will wrongly drop the packet.
For another thing if there is a TT entry but the TTVN of this entry is
newer than the originally addressed destination node: Then the
intermediate node will wrongly redirect the packet, leading to
duplicated multicast packets at a multicast listener and missing
packets at other multicast listeners or multicast routers.
Fixing this by not applying the unicast packet rerouting to batman-adv
unicast packets with a multicast payload. We are not able to detect a
roaming multicast listener at the moment and will just continue to send
the multicast frame to both the new and old destination for a while in
case of such a roaming multicast listener.
Fixes: a73105b8d4 ("batman-adv: improved client announcement mechanism")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2b947879c ]
eni_init_one() misses to call pci_disable_device() in an error path.
Jump to err_disable to fix it.
Fixes: ede58ef28e ("atm: remove deprecated use of pci api")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 097930e85f ]
It seems that due to a copy & paste error the void pointer
in batadv_choose_backbone_gw() is cast to the wrong type.
Fixing this by using "struct batadv_bla_backbone_gw" instead of "struct
batadv_bla_claim" which better matches the caller's side.
For now it seems that we were lucky because the two structs both have
their orig/vid and addr/vid in the beginning. However I stumbled over
this issue when I was trying to add some debug variables in front of
"orig" in batadv_backbone_gw, which caused hash lookups to fail.
Fixes: 07568d0369 ("batman-adv: don't rely on positions in struct for hashing")
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4afc850e2e ]
Following commit e186967865 ("mwifiex: Prevent memory corruption
handling keys") the mwifiex driver fails to authenticate with certain
networks, specifically networks with 256 bit keys, and repeatedly asks
for the password. The kernel log repeats the following lines (id and
bssid redacted):
mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid>
mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully
mwifiex_pcie 0000:01:00.0: crypto keys added
mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3
Tracking down this problem lead to the overflow check introduced by the
aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This
check fails on networks with 256 bit keys due to the current storage
size for AES keys in struct mwifiex_aes_param being only 128 bit.
To fix this issue, increase the storage size for AES keys to 256 bit.
Fixes: e186967865 ("mwifiex: Prevent memory corruption handling keys")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reported-by: Kaloyan Nikolov <konik98@gmail.com>
Tested-by: Kaloyan Nikolov <konik98@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200825153829.38043-1-luzmaximilian@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db6c6a0df8 ]
When a function is annotated with STACK_FRAME_NON_STANDARD, objtool
doesn't validate its code paths. It also skips sibling call detection
within the function.
But sibling call detection is actually needed for the case where the
ignored function doesn't have any return instructions. Otherwise
objtool naively marks the function as implicit static noreturn, which
affects the reachability of its callers, resulting in "unreachable
instruction" warnings.
Fix it by just enabling sibling call detection for ignored functions.
The 'insn->ignore' check in add_jump_destinations() is no longer needed
after
e6da956795 ("objtool: Don't use ignore flag for fake jumps").
Fixes the following warning:
arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction
which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/5b1e2536cdbaa5246b60d7791b76130a74082c62.1599751464.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21653a4181 ]
Some ACPI i2c-devices _STA method (which is used to detect if the device
is present) use autodetection code which probes which device is present
over i2c. This requires the I2C ACPI OpRegion handler to be registered
before we enumerate i2c-clients under the i2c-adapter.
This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and
ThinkBook 15 IIL not getting an i2c-client instantiated and thus not
working.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f228aab21 ]
Don't check drm_crtc_state::active for this either, per its
documentation in include/drm/drm_crtc.h:
* Hence drivers must not consult @active in their various
* &drm_mode_config_funcs.atomic_check callback to reject an atomic
* commit.
atomic_remove_fb disables the CRTC as needed for disabling the primary
plane.
This prevents at least the following problems if the primary plane gets
disabled (e.g. due to destroying the FB assigned to the primary plane,
as happens e.g. with mutter in Wayland mode):
* The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID
(which enables the cursor plane).
* If the cursor plane was enabled, changing the legacy DPMS property
value from off to on returned EINVAL.
v2:
* Minor changes to code comment and commit log, per review feedback.
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4790a8894 ]
[why]
Recent characterization shows increased stutter latencies on some SKUs,
leading to underflow.
[how]
Update SOC params to account for this worst case latency.
Signed-off-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 087d764159 ]
In the resume stage of GPU recovery, start_cpsch will call pm_init
which set pm->allocated as false, cause the next pm_release_ib has
no chance to release ib memory.
Add pm_release_ib in stop_cpsch which will be called in the suspend
stage of GPU recovery.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcb2b70cdb ]
Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem.
Sometimes these functions are not inlined, and then the build
complains about section mismatch.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a1d6db23d ]
Mask the IRQ status to only the bits that the driver checks. This
prevents excessive driver warnings when operating in slave mode
when additional bits are set that the driver doesn't handle.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66d18dbda8 ]
Without this we get lockdep failures. They're spurious failures as SMP isn't
up when ftrace_init_nop() is called. As far as I can tell the easiest fix is
to just take the lock, which also seems like the safest fix.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5a2cda4f1 ]
When the wm8958_mic_detect, wm8994_mic_detect functions get called from
the machine driver, e.g. from the card's late_probe() callback, the CODEC
device may be PM runtime suspended and any regmap writes have no effect.
Add PM runtime calls to these functions to ensure the device registers
are updated as expected.
This suppresses an error during boot
"wm8994-codec: ASoC: error at snd_soc_component_update_bits on wm8994-codec"
caused by the regmap access error due to the cache_only flag being set.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200827173357.31891-2-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc62d68e2a ]
exceptions may be traversed using list_for_each_entry_rcu()
outside of an RCU read side critical section BUT under the
protection of decgroup_mutex. Hence add the corresponding
lockdep expression to fix the following false-positive
warning:
[ 2.304417] =============================
[ 2.304418] WARNING: suspicious RCU usage
[ 2.304420] 5.5.4-stable #17 Tainted: G E
[ 2.304422] -----------------------------
[ 2.304424] security/device_cgroup.c:355 RCU-list traversed in non-reader section!!
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05b29021fb ]
Commit 3b4b19721e ("nvme: fix possible deadlock when I/O is
blocked") reverted multipath head disk revalidation due to deadlocks
caused by holding the bd_mutex during revalidate.
Updating the multipath disk blockdev size is still required though for
userspace to be able to observe any resizing while the device is
mounted. Directly update the bdev inode size to avoid unnecessarily
holding the bdev->bd_mutex.
Fixes: 3b4b19721e ("nvme: fix possible deadlock when I/O is
blocked")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 659d4587fe ]
Compile the kernel for arm 32 platform, the build warning found.
To fix that, should use div_u64() for divisions.
| net/openvswitch/meter.c:396: undefined reference to `__udivdi3'
[add more commit msg, change reported tag, and use div_u64 instead
of do_div by Tonghao]
Fixes: e57358873b ("net: openvswitch: use u64 for meter bucket")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6630529ae ]
We've received a regression report on Intel HD-audio controller that
wakes up immediately after S3 suspend. The bisection leads to the
commit c4c8dd6ef8 ("ALSA: hda: Skip controller resume if not
needed"). This commit replaces the system-suspend to use
pm_runtime_force_suspend() instead of the direct call of
__azx_runtime_suspend(). However, by some really mysterious reason,
pm_runtime_force_suspend() causes a spurious wakeup (although it calls
the same __azx_runtime_suspend() internally).
As an ugly workaround for now, revert the behavior to call
__azx_runtime_suspend() and __azx_runtime_resume() for those old Intel
platforms that may exhibit such a problem, while keeping the new
standard pm_runtime_force_suspend() and pm_runtime_force_resume()
pair for the remaining chips.
Fixes: c4c8dd6ef8 ("ALSA: hda: Skip controller resume if not needed")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208649
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200727164443.4233-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d6762af30 ]
HD-audio codec driver applies a tricky procedure to forcibly perform
the runtime resume by mimicking the usage count even if the device has
been runtime-suspended beforehand. This was needed to assure to
trigger the jack detection update after the system resume.
And recently we also applied the similar logic to the HD-audio
controller side. However this seems leading to some inconsistency,
and eventually PCI controller gets screwed up.
This patch is an attempt to fix and clean up those behavior: instead
of the tricky runtime resume procedure, the existing jackpoll work is
scheduled when such a forced codec resume is required. The jackpoll
work will power up the codec, and this alone should suffice for the
jack status update in usual cases. If the extra polling is requested
(by checking codec->jackpoll_interval), the manual update is invoked
after that, and the codec is powered down again.
Also, we filter the spurious wake up of the codec from the controller
runtime resume by checking codec->relaxed_resume flag. If this flag
is set, basically we don't need to wake up explicitly, but it's
supposed to be done via the audio component notifier.
Fixes: c4c8dd6ef8 ("ALSA: hda: Skip controller resume if not needed")
Link: https://lore.kernel.org/r/20200422203744.26299-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8510895baf ]
A big uncore event group is split into multiple small groups which only
include the uncore events from the same PMU. This has been supported in
the commit 3cdc5c2cb9 ("perf parse-events: Handle uncore event
aliases in small groups properly").
If the event's PMU name starts to repeat, it must be a new event.
That can be used to distinguish the leader from other members.
But now it only compares the pointer of pmu_name
(leader->pmu_name == evsel->pmu_name).
If we use "perf stat -M LLC_MISSES.PCIE_WRITE -a" on cascadelakex,
the event list is:
evsel->name evsel->pmu_name
---------------------------------------------------------------
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_4 (as leader)
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_2
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_0
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_5
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_3
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_1
unc_iio_data_req_of_cpu.mem_write.part1 uncore_iio_4
......
For the event "unc_iio_data_req_of_cpu.mem_write.part1" with
"uncore_iio_4", it should be the event from PMU "uncore_iio_4".
It's not a new leader for this PMU.
But if we use "(leader->pmu_name == evsel->pmu_name)", the check
would be failed and the event is stored to leaders[] as a new
PMU leader.
So this patch uses strcmp to compare the PMU name between events.
Fixes: d4953f7ef1 ("perf parse-events: Fix 3 use after frees found with clang ASAN")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200430003618.17002-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6544abc520 ]
Currently, when using _of_add_opp_table_v2 parsed_static_opps is
increased and this value is used in _opp_remove_all_static() to
check if there are static opp entries that need to be freed.
Unfortunately this does not happen when using _of_add_opp_table_v1(),
which leads to warnings.
This patch increases parsed_static_opps in _of_add_opp_table_v1() in a
similar way as in _of_add_opp_table_v2().
Fixes: 03758d6026 ("opp: Replace list_kref with a local counter")
Cc: v5.6+ <stable@vger.kernel.org> # v5.6+
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
[ Viresh: Do the operation with lock held and set the value to 1 instead
of incrementing it ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d68f4e43a4 ]
The mt76_led_cleanup() function is called unconditionally, which
leads to a link error when CONFIG_LEDS is a loadable module or
disabled but mt76 is built-in:
drivers/net/wireless/mediatek/mt76/mac80211.o: In function `mt76_unregister_device':
mac80211.c:(.text+0x2ac): undefined reference to `led_classdev_unregister'
Use the same trick that is guarding the registration, using an
IS_ENABLED() check for the CONFIG_MT76_LEDS symbol that indicates
whether LEDs can be used or not.
Fixes: 36f7e2b2bb ("mt76: do not use devm API for led classdev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c16f39d14a ]
When CONFIG_MTD_UBI_FASTMAP is enabled, fm_anchor will be assigned
a free PEB during ubi_wl_init() or ubi_update_fastmap(). However
if fastmap is not used or disabled on the MTD device, ubi_wl_entry
related with the PEB will not be freed during detach.
So Fix it by freeing the unused fastmap anchor during detach.
Fixes: f9c34bb529 ("ubi: Fix producing anchor PEBs")
Reported-by: syzbot+f317896aae32eb281a58@syzkaller.appspotmail.com
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 463538a383 ]
Commit 5aa98879ef ("s390/cpum_sf: prohibit callchain data collection")
prohibits call graph sampling for hardware events on s390. The
information recorded is out of context and does not match.
On s390 this commit now breaks test case 68 Zstd perf.data
compression/decompression.
Therefore omit call graph sampling on s390 in this test.
Output before:
[root@t35lp46 perf]# ./perf test -Fv 68
68: Zstd perf.data compression/decompression :
--- start ---
Collecting compressed record file:
Error:
cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
Try 'perf stat'
---- end ----
Zstd perf.data compression/decompression: FAILED!
[root@t35lp46 perf]#
Output after:
[root@t35lp46 perf]# ./perf test -Fv 68
68: Zstd perf.data compression/decompression :
--- start ---
Collecting compressed record file:
500+0 records in
500+0 records out
256000 bytes (256 kB, 250 KiB) copied, 0.00615638 s, 41.6 MB/s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.004 MB /tmp/perf.data.X3M,
compressed (original 0.002 MB, ratio is 3.609) ]
Checking compressed events stats:
# compressed : Zstd, level = 1, ratio = 4
COMPRESSED events: 1
2ELIFREPh---- end ----
Zstd perf.data compression/decompression: Ok
[root@t35lp46 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200729135314.91281-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa91e4aa17 ]
[BUG]
When running tests like generic/013 on test device with btrfs quota
enabled, it can normally lead to data leak, detected at unmount time:
BTRFS warning (device dm-3): qgroup 0/5 has unreleased space, type 0 rsv 4096
------------[ cut here ]------------
WARNING: CPU: 11 PID: 16386 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs]
RIP: 0010:close_ctree+0x1dc/0x323 [btrfs]
Call Trace:
btrfs_put_super+0x15/0x17 [btrfs]
generic_shutdown_super+0x72/0x110
kill_anon_super+0x18/0x30
btrfs_kill_super+0x17/0x30 [btrfs]
deactivate_locked_super+0x3b/0xa0
deactivate_super+0x40/0x50
cleanup_mnt+0x135/0x190
__cleanup_mnt+0x12/0x20
task_work_run+0x64/0xb0
__prepare_exit_to_usermode+0x1bc/0x1c0
__syscall_return_slowpath+0x47/0x230
do_syscall_64+0x64/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace caf08beafeca2392 ]---
BTRFS error (device dm-3): qgroup reserved space leaked
[CAUSE]
In the offending case, the offending operations are:
2/6: writev f2X[269 1 0 0 0 0] [1006997,67,288] 0
2/7: truncate f2X[269 1 0 0 48 1026293] 18388 0
The following sequence of events could happen after the writev():
CPU1 (writeback) | CPU2 (truncate)
-----------------------------------------------------------------
btrfs_writepages() |
|- extent_write_cache_pages() |
|- Got page for 1003520 |
| 1003520 is Dirty, no writeback |
| So (!clear_page_dirty_for_io()) |
| gets called for it |
|- Now page 1003520 is Clean. |
| | btrfs_setattr()
| | |- btrfs_setsize()
| | |- truncate_setsize()
| | New i_size is 18388
|- __extent_writepage() |
| |- page_offset() > i_size |
|- btrfs_invalidatepage() |
|- Page is clean, so no qgroup |
callback executed
This means, the qgroup reserved data space is not properly released in
btrfs_invalidatepage() as the page is Clean.
[FIX]
Instead of checking the dirty bit of a page, call
btrfs_qgroup_free_data() unconditionally in btrfs_invalidatepage().
As qgroup rsv are completely bound to the QGROUP_RESERVED bit of
io_tree, not bound to page status, thus we won't cause double freeing
anyway.
Fixes: 0b34c261e2 ("btrfs: qgroup: Prevent qgroup->reserved from going subzero")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 823a65409c ]
When an rport event (RPORT_EV_READY) is updated without work being queued,
avoid taking an additional reference.
This issue was leading to memory leak. Trace from KMEMLEAK tool:
unreferenced object 0xffff8888259e8780 (size 512):
comm "kworker/2:1", jiffies 4433237386 (age 113021.971s)
hex dump (first 32 bytes):
58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
backtrace:
[<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
[<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
[<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
[<00000000e0eb6893>] process_one_work+0x382/0x6c0
[<000000002dfd9e21>] worker_thread+0x57/0x5c0
[<00000000b648204f>] kthread+0x1a0/0x1c0
[<0000000072f5ab20>] ret_from_fork+0x35/0x40
[<000000001d5c05d8>] 0xffffffffffffffff
Below is the log sequence which leads to memory leak. Here we get the
RPORT_EV_READY and RPORT_EV_STOP back to back, which lead to overwrite the
event RPORT_EV_READY by event RPORT_EV_STOP. Because of this, kref_count
gets incremented by 1.
kernel: host0: rport fffce5: Received PLOGI request
kernel: host0: rport fffce5: Received PLOGI in INIT state
kernel: host0: rport fffce5: Port is Ready
kernel: host0: rport fffce5: Received PRLI request while in state Ready
kernel: host0: rport fffce5: PRLI rspp type 8 active 1 passive 0
kernel: host0: rport fffce5: Received LOGO request while in state Ready
kernel: host0: rport fffce5: Delete port
kernel: host0: rport fffce5: Received PLOGI request
kernel: host0: rport fffce5: Received PLOGI in state Delete - send busy
kernel: host0: rport fffce5: work event 3
kernel: host0: rport fffce5: lld callback ev 3
kernel: host0: rport fffce5: work delete
Link: https://lore.kernel.org/r/20200626094959.32151-1-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71f2bf85e9 ]
Handling of extra kref which is done by lookup table in case rdata is
already present in list.
This issue was leading to memory leak. Trace from KMEMLEAK tool:
unreferenced object 0xffff8888259e8780 (size 512):
comm "kworker/2:1", pid 182614, jiffies 4433237386 (age 113021.971s)
hex dump (first 32 bytes):
58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
backtrace:
[<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
[<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
[<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
[<00000000e0eb6893>] process_one_work+0x382/0x6c0
[<000000002dfd9e21>] worker_thread+0x57/0x5c0
[<00000000b648204f>] kthread+0x1a0/0x1c0
[<0000000072f5ab20>] ret_from_fork+0x35/0x40
[<000000001d5c05d8>] 0xffffffffffffffff
Below is the log sequence which leads to memory leak. Here we get the
nested "Received PLOGI request" for same port and this request leads to
call the fc_rport_create() twice for the same rport.
kernel: host1: rport fffce5: Received PLOGI request
kernel: host1: rport fffce5: Received PLOGI in INIT state
kernel: host1: rport fffce5: Port is Ready
kernel: host1: rport fffce5: Received PRLI request while in state Ready
kernel: host1: rport fffce5: PRLI rspp type 8 active 1 passive 0
kernel: host1: rport fffce5: Received LOGO request while in state Ready
kernel: host1: rport fffce5: Delete port
kernel: host1: rport fffce5: Received PLOGI request
kernel: host1: rport fffce5: Received PLOGI in state Delete - send busy
Link: https://lore.kernel.org/r/20200622101212.3922-2-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5af7fef39d ]
When using 802.1X over mesh networks, at first an ordinary
mesh peering is established, then the 802.1X EAPOL dialog
happens, afterwards an authenticated mesh peering exchange
(AMPE) happens, finally the peering is complete and we can
set the STA authorized flag.
As 802.1X is an intermediate step here and key material is
not yet exchanged for stations we have to skip mesh path lookup
for these EAPOL frames. Otherwise the already configure mesh
group encryption key would be used to send a mesh path request
which no one can decipher, because we didn't already establish
key material on both peers, like with SAE and directly using AMPE.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200617082637.22670-2-markus.theil@tu-ilmenau.de
[remove pointless braces, remove unnecessary local variable,
the list can only process one such frame (or its fragments)]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b4b19721e ]
Revert fab7772bfb ("nvme-multipath: revalidate nvme_ns_head gendisk
in nvme_validate_ns")
When adding a new namespace to the head disk (via nvme_mpath_set_live)
we will see partition scan which triggers I/O on the mpath device node.
This process will usually be triggered from the scan_work which holds
the scan_lock. If I/O blocks (if we got ana change currently have only
available paths but none are accessible) this can deadlock on the head
disk bd_mutex as both partition scan I/O takes it, and head disk revalidation
takes it to check for resize (also triggered from scan_work on a different
path). See trace [1].
The mpath disk revalidation was originally added to detect online disk
size change, but this is no longer needed since commit cb224c3af4
("nvme: Convert to use set_capacity_revalidate_and_notify") which already
updates resize info without unnecessarily revalidating the disk (the
mpath disk doesn't even implement .revalidate_disk fop).
[1]:
--
kernel: INFO: task kworker/u65:9:494 blocked for more than 241 seconds.
kernel: Tainted: G OE 5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u65:9 D 0 494 2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: schedule_preempt_disabled+0xe/0x10
kernel: __mutex_lock.isra.0+0x182/0x4f0
kernel: __mutex_lock_slowpath+0x13/0x20
kernel: mutex_lock+0x2e/0x40
kernel: revalidate_disk+0x63/0xa0
kernel: __nvme_revalidate_disk+0xfe/0x110 [nvme_core]
kernel: nvme_revalidate_disk+0xa4/0x160 [nvme_core]
kernel: ? evict+0x14c/0x1b0
kernel: revalidate_disk+0x2b/0xa0
kernel: nvme_validate_ns+0x49/0x940 [nvme_core]
kernel: ? blk_mq_free_request+0xd2/0x100
kernel: ? __nvme_submit_sync_cmd+0xbe/0x1e0 [nvme_core]
kernel: nvme_scan_work+0x24f/0x380 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x249/0x400
kernel: kthread+0x104/0x140
kernel: ? process_one_work+0x380/0x380
kernel: ? kthread_park+0x80/0x80
kernel: ret_from_fork+0x1f/0x40
...
kernel: INFO: task kworker/u65:1:2630 blocked for more than 241 seconds.
kernel: Tainted: G OE 5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u65:1 D 0 2630 2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: io_schedule+0x16/0x40
kernel: do_read_cache_page+0x438/0x830
kernel: ? __switch_to_asm+0x34/0x70
kernel: ? file_fdatawait_range+0x30/0x30
kernel: read_cache_page+0x12/0x20
kernel: read_dev_sector+0x27/0xc0
kernel: read_lba+0xc1/0x220
kernel: ? kmem_cache_alloc_trace+0x19c/0x230
kernel: efi_partition+0x1e6/0x708
kernel: ? vsnprintf+0x39e/0x4e0
kernel: ? snprintf+0x49/0x60
kernel: check_partition+0x154/0x244
kernel: rescan_partitions+0xae/0x280
kernel: __blkdev_get+0x40f/0x560
kernel: blkdev_get+0x3d/0x140
kernel: __device_add_disk+0x388/0x480
kernel: device_add_disk+0x13/0x20
kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel: ? nvme_update_ns_ana_state+0x60/0x60 [nvme_core]
kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel: nvme_validate_ns+0x396/0x940 [nvme_core]
kernel: ? blk_mq_free_request+0xd2/0x100
kernel: nvme_scan_work+0x24f/0x380 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x249/0x400
kernel: kthread+0x104/0x140
kernel: ? process_one_work+0x380/0x380
kernel: ? kthread_park+0x80/0x80
kernel: ret_from_fork+0x1f/0x40
--
Fixes: fab7772bfb ("nvme-multipath: revalidate nvme_ns_head gendisk
in nvme_validate_ns")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb13fa0227 ]
Looks like some drivers define MTD names with a colon in it, thus
making mtdpart= parsing impossible. Let's fix the parser to gracefully
handle that case: the last ':' in a partition definition sequence is
considered instead of the first one.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ron Minnich <rminnich@google.com>
Tested-by: Ron Minnich <rminnich@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abb242f571 ]
The move_lock is a per-memcg lock, but the VM accounting code that needs
to acquire it comes from the page and follows page->mem_cgroup under RCU
protection. That means that the page becomes unlocked not when we drop
the move_lock, but when we update page->mem_cgroup. And that assignment
doesn't imply any memory ordering. If that pointer write gets reordered
against the reads of the page state - page_mapped, PageDirty etc. the
state may change while we rely on it being stable and we can end up
corrupting the counters.
Place an SMP memory barrier to make sure we're done with all page state by
the time the new page->mem_cgroup becomes visible.
Also replace the open-coded move_lock with a lock_page_memcg() to make it
more obvious what we're serializing against.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-3-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6c1f098f2 ]
"prev_offset" is a static variable in swapin_nr_pages() that can be
accessed concurrently with only mmap_sem held in read mode as noticed by
KCSAN,
BUG: KCSAN: data-race in swap_cluster_readahead / swap_cluster_readahead
write to 0xffffffff92763830 of 8 bytes by task 14795 on cpu 17:
swap_cluster_readahead+0x2a6/0x5e0
swapin_readahead+0x92/0x8dc
do_swap_page+0x49b/0xf20
__handle_mm_fault+0xcfb/0xd70
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x715
page_fault+0x34/0x40
1 lock held by (dnf)/14795:
#0: ffff897bd2e98858 (&mm->mmap_sem#2){++++}-{3:3}, at: do_page_fault+0x143/0x715
do_user_addr_fault at arch/x86/mm/fault.c:1405
(inlined by) do_page_fault at arch/x86/mm/fault.c:1535
irq event stamp: 83493
count_memcg_event_mm+0x1a6/0x270
count_memcg_event_mm+0x119/0x270
__do_softirq+0x365/0x589
irq_exit+0xa2/0xc0
read to 0xffffffff92763830 of 8 bytes by task 1 on cpu 22:
swap_cluster_readahead+0xfd/0x5e0
swapin_readahead+0x92/0x8dc
do_swap_page+0x49b/0xf20
__handle_mm_fault+0xcfb/0xd70
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x715
page_fault+0x34/0x40
1 lock held by systemd/1:
#0: ffff897c38f14858 (&mm->mmap_sem#2){++++}-{3:3}, at: do_page_fault+0x143/0x715
irq event stamp: 43530289
count_memcg_event_mm+0x1a6/0x270
count_memcg_event_mm+0x119/0x270
__do_softirq+0x365/0x589
irq_exit+0xa2/0xc0
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200402213748.2237-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc3da0461c ]
Nothing ensures that session will still be valid by the time we
dereference the pointer. Take and put a reference.
In principle, we should always be able to get a reference here, but
throw a warning if that's ever not the case.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11362b1bef ]
There is a potential race condition between hypervisor page faults
and flushing a memslot. It is possible for a page fault to read the
memslot before a memslot is updated and then write a PTE to the
partition-scoped page tables after kvmppc_radix_flush_memslot has
completed. (Note that this race has never been explicitly observed.)
To close this race, it is sufficient to increment the MMU sequence
number while the kvm->mmu_lock is held. That will cause
mmu_notifier_retry() to return true, and the page fault will then
return to the guest without inserting a PTE.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c36cac28cb ]
In btrfs_submit_direct(), if we fail to allocate the btrfs_dio_private,
we complete the ordered extent range. However, we don't mark that the
range doesn't need to be cleaned up from btrfs_direct_IO() until later.
Therefore, if we fail to allocate the btrfs_dio_private, we complete the
ordered extent range twice. We could fix this by updating
unsubmitted_oe_range earlier, but it's cleaner to reorganize the code so
that creating the btrfs_dio_private and submitting the bios are
separate, and once the btrfs_dio_private is created, cleanup always
happens through the btrfs_dio_private.
The logic around unsubmitted_oe_range_end and unsubmitted_oe_range_start
is really subtle. We have the following:
1. btrfs_direct_IO sets those two to the same value.
2. When we call __blockdev_direct_IO unless
btrfs_get_blocks_direct->btrfs_get_blocks_direct_write is called to
modify unsubmitted_oe_range_start so that start < end. Cleanup
won't happen.
3. We come into btrfs_submit_direct - if it dip allocation fails we'd
return with oe_range_end now modified so cleanup will happen.
4. If we manage to allocate the dip we reset the unsubmitted range
members to be equal so that cleanup happens from
btrfs_endio_direct_write.
This 4-step logic is not really obvious, especially given it's scattered
across 3 functions.
Fixes: f28a492878 ("Btrfs: fix leaking of ordered extents after direct IO write error")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
[ add range start/end logic explanation from Nikolay ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c09c03091 ]
Deleting a subvolume on a full filesystem leads to ENOSPC followed by a
forced read-only. This is not a transaction abort and the filesystem is
otherwise ok, so the error should be just propagated to the callers.
This is caused by unnecessary call to btrfs_handle_fs_error for all
errors, except EAGAIN. This does not make sense as the standard
transaction abort mechanism is in btrfs_drop_snapshot so all relevant
failures are handled.
Originally in commit cb1b69f450 ("Btrfs: forced readonly when
btrfs_drop_snapshot() fails") there was no return value at all, so the
btrfs_std_error made some sense but once the error handling and
propagation has been implemented we don't need it anymore.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c0e69ae1b ]
If the SS PHY is in P3, there is no pipe_clk, HW may use suspend_clk
for function, as suspend_clk is slow so EP command need more time to
complete, e.g, imx8M suspend_clk is 32K, set ep configuration will
take about 380us per below trace time stamp(44.286278 - 44.285897
= 0.000381):
configfs_acm.sh-822 [000] d..1 44.285896: dwc3_writel: addr
000000006d59aae1 value 00000401
configfs_acm.sh-822 [000] d..1 44.285897: dwc3_readl: addr
000000006d59aae1 value 00000401
... ...
configfs_acm.sh-822 [000] d..1 44.286278: dwc3_readl: addr
000000006d59aae1 value 00000001
configfs_acm.sh-822 [000] d..1 44.286279: dwc3_gadget_ep_cmd:
ep0out: cmd 'Set Endpoint Configuration' [401] params 00001000
00000500 00000000 --> status: Successful
This was originally found on Hisilicon Kirin Soc that need more time
for the device controller to clear the CmdAct of DEPCMD.
Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48021f9813 ]
If uboot passes a blank string to console_setup then it results in
a trashed memory. Ultimately, the kernel crashes during freeing up
the memory.
This fix checks if there is a blank parameter being
passed to console_setup from uboot. In case it detects that
the console parameter is blank then it doesn't setup the serial
device and it gracefully exits.
Link: https://lore.kernel.org/r/20200522065306.83-1-shreyas.joshi@biamp.com
Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: Better format the commit message and code, remove unnecessary brackets.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc455f4c88 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7372dfb3f ]
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00583fbe80 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49ee3c2ab5 ]
We are seeing a deadlock in e1000 down when NAPI is being disabled. Looking
over the kernel function trace of the system it appears that the interface
is being closed and then a reset is hitting which deadlocks the interface
as the NAPI interface is already disabled.
To prevent this from happening I am disabling the reset task when
__E1000_DOWN is already set. In addition code has been added so that we set
the __E1000_DOWN while holding the __E1000_RESET flag in e1000_close in
order to guarantee that the reset task will not run after we have started
the close call.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Maxim Zhukov <mussitantesmortem@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7646585a3 ]
In free memory of gpu path, remove bo from validate_list to make sure
restore worker don't access the BO any more, then unregister bo MMU
interval notifier. Otherwise, the restore worker will crash in the
middle of validating BO user pages if MMU interval notifer is gone.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fcc4ae6fa ]
APEI is unable to do all of its error handling work in nmi-context, so
it defers non-fatal work onto the irq_work queue. arch_irq_work_raise()
sends an IPI to the calling cpu, but this is not guaranteed to be taken
before returning to user-space.
Unless the exception interrupted a context with irqs-masked,
irq_work_run() can run immediately. Otherwise return -EINPROGRESS to
indicate ghes_notify_sea() found some work to do, but it hasn't
finished yet.
With this apei_claim_sea() returning '0' means this external-abort was
also notification of a firmware-first RAS error, and that APEI has
processed the CPER records.
Signed-off-by: James Morse <james.morse@arm.com>
Tested-by: Tyler Baicar <baicar@os.amperecomputing.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7f40c233a ]
The comparison of hcd->irq to less than zero for an error check will
never be true because hcd->irq is an unsigned int. Fix this by
assigning the int retval to the return of platform_get_irq and checking
this for the -ve error condition and assigning hcd->irq to retval.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: c856b4b0fd ("USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200515165453.104028-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ddd9ced9a ]
A GETATTR request can race with FUSE_NOTIFY_INVAL_INODE, resulting in the
attribute cache being updated with stale information after the
invalidation.
Fix this by bumping the attribute version in fuse_reverse_inval_inode().
Reported-by: Krzysztof Rusek <rusek@9livesdata.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32f98877c5 ]
page_count() is unstable. Unless there has been an RCU grace period
between when the page was removed from the page cache and now, a
speculative reference may exist from the page cache.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea740bd5f5 ]
Way back when I was writing the RPC/RDMA server-side backchannel
code, I misread the TCP backchannel reply handler logic. When
svc_tcp_recvfrom() successfully receives a backchannel reply, it
does not return -EAGAIN. It sets XPT_DATA and returns zero.
Update svc_rdma_recvfrom() to return zero. Here, XPT_DATA doesn't
need to be set again: it is set whenever a new message is received,
behind a spin lock in a single threaded context.
Also, if handling the cb reply is not successful, the message is
simply dropped. There's no special message framing to deal with as
there is in the TCP case.
Now that the handle_bc_reply() return value is ignored, I've removed
the dprintk call sites in the error exit of handle_bc_reply() in
favor of trace points in other areas that already report the error
cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49826937e7 ]
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
bt_bmc_config_irq(). And in the function bt_bmc_probe(),
when get irq failed, it will print error message. So use
platform_get_irq_optional() to simplify code. Finally in the
function bt_bmc_remove() should make the right status check
if get irq failed.
Signed-off-by: Shengju Zhang <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Message-Id: <20200505102906.17196-1-tangbin@cmss.chinamobile.com>
[Also set bt_bmc->irq to a negative value if devm_request_irq() fails.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 547a734863 ]
'exynos_dsi_parse_dt()' takes a reference to 'dsi->in_bridge_node'.
This must be released in the error handling path.
In order to do that, add an error handling path and move the
'exynos_dsi_parse_dt()' call from the beginning to the end of the probe
function to ease the error handling path.
This function only sets some variables which are used only in the
'transfer' function.
The call chain is:
.transfer
--> exynos_dsi_host_transfer
--> exynos_dsi_init
--> exynos_dsi_enable_clock (use burst_clk_rate and esc_clk_rate)
--> exynos_dsi_set_pll (use pll_clk_rate)
While at it, also handle cases where 'component_add()' fails.
This patch is similar to commit 70505c2ef9 ("drm/exynos: dsi: Remove bridge node reference in removal")
which fixed the issue in the remove function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c637fa1512 ]
The unsol event handling code has a loop retrieving the read/write
indices and the arrays without locking while the append to the array
may happen concurrently. This may lead to some inconsistency.
Although there hasn't been any proof of this bad results, it's still
safer to protect the racy accesses.
This patch adds the spinlock protection around the unsol handling loop
for addressing it. Here we take bus->reg_lock as the writer side
snd_hdac_bus_queue_event() is also protected by that lock.
Link: https://lore.kernel.org/r/20200516062556.30951-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d31676a8d ]
Some variants of the samsung tty driver can pick which clock
to use for their baud rate generation. In the DT conversion,
a default clock was selected to be used if a specific one wasn't
assigned and then a comparison of which clock rate worked better
was done. Unfortunately, the comparison was implemented in such
a way that only the default clock was ever actually compared.
Fix this by iterating through all possible clocks, except when a
specific clock has already been picked via clk_sel (which is
only possible via board files).
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/BN6PR04MB06604E63833EA41837EBF77BA3A30@BN6PR04MB0660.namprd04.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0771d7df81 ]
Upon receipt of a service subscription request from user via a topology
connection, one 'sub' object will be allocated in kernel, so it will be
able to send an event of the service if any to the user correspondingly
then. Also, in case of any failure, the connection will be shutdown and
all the pertaining 'sub' objects will be freed.
However, there is a race condition as follows resulting in memory leak:
receive-work connection send-work
| | |
sub-1 |<------//-------| |
sub-2 |<------//-------| |
| |<---------------| evt for sub-x
sub-3 |<------//-------| |
: : :
: : :
| /--------| |
| | * peer closed |
| | | |
| | |<-------X-------| evt for sub-y
| | |<===============|
sub-n |<------/ X shutdown |
-> orphan | |
That is, the 'receive-work' may get the last subscription request while
the 'send-work' is shutting down the connection due to peer close.
We had a 'lock' on the connection, so the two actions cannot be carried
out simultaneously. If the last subscription is allocated e.g. 'sub-n',
before the 'send-work' closes the connection, there will be no issue at
all, the 'sub' objects will be freed. In contrast the last subscription
will become orphan since the connection was closed, and we released all
references.
This commit fixes the issue by simply adding one test if the connection
remains in 'connected' state right after we obtain the connection lock,
then a subscription object can be created as usual, otherwise we ignore
it.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Reported-by: Thang Ngo <thang.h.ngo@dektech.com.au>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fede8076aa ]
KVM is not handling the case where EIP wraps around the 32-bit address
space (that is, outside long mode). This is needed both in vmx.c
and in emulate.c. SVM with NRIPS is okay, but it can still print
an error to dmesg due to integer overflow.
Reported-by: Nick Peterson <everdox@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adf1d69264 ]
After sending Inquiry Cancel command to the controller, it is possible
that Inquiry Complete event comes before Inquiry Cancel command complete
event. In this case the Inquiry Cancel command will have status of
Command Disallowed since there is no Inquiry session to be cancelled.
This case should not be treated as error, otherwise we can reach an
inconsistent state.
Example of a btmon trace when this happened:
< HCI Command: Inquiry Cancel (0x01|0x0002) plen 0
> HCI Event: Inquiry Complete (0x01) plen 1
Status: Success (0x00)
> HCI Event: Command Complete (0x0e) plen 4
Inquiry Cancel (0x01|0x0002) ncmd 1
Status: Command Disallowed (0x0c)
Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05942b8c36 ]
The USB phy takes some time to reset, so make sure we give it to it. The
delay length was taken from the 4x12 phy driver.
This manifested in issues with the DWC2 driver since commit fe369e1826
("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.")
where the endianness check would read the DWC ID as 0 due to the phy still
resetting, resulting in the wrong endian mode being chosen.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/BN6PR04MB06605D52502816E500683553A3D10@BN6PR04MB0660.namprd04.prod.outlook.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44c99904cf ]
Depending on the board design, the I2C controllers found on Tegra SoCs
may require pinmuxing in order to function. This is done as part of the
driver's runtime suspend/resume operations. However, the PM core does
not allow devices to go into runtime suspend during system sleep to
avoid potential races with the suspend/resume of their parents.
As a result of this, when Tegra SoCs resume from system suspend, their
I2C controllers may have lost the pinmux state in hardware, whereas the
pinctrl subsystem is not aware of this. To fix this, make sure that if
the I2C controller is not runtime suspended, the runtime suspend code is
still executed in order to disable the module clock (which we don't need
to be enabled during sleep) and set the pinmux to the idle state.
Conversely, make sure that the I2C controller is properly resumed when
waking up from sleep so that pinmux settings are properly restored.
This fixes a bug seen with DDC transactions to an HDMI monitor timing
out when resuming from system suspend.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbfc35a486 ]
In a couple of places in the slub memory allocator, the code uses
"s->offset" as a check to see if the free pointer is put right after the
object. That check is no longer true with commit 3202fa62fb ("slub:
relocate freelist pointer to middle of object").
As a result, echoing "1" into the validate sysfs file, e.g. of dentry,
may cause a bunch of "Freepointer corrupt" error reports like the
following to appear with the system in panic afterwards.
=============================================================================
BUG dentry(666:pmcd.service) (Tainted: G B): Freepointer corrupt
-----------------------------------------------------------------------------
To fix it, use the check "s->offset == s->inuse" in the new helper
function freeptr_outside_object() instead. Also add another helper
function get_info_end() to return the end of info block (inuse + free
pointer if not overlapping with object).
Fixes: 3202fa62fb ("slub: relocate freelist pointer to middle of object")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Vitaly Nikolenko <vnik@duasynt.com>
Cc: Silvio Cesare <silvio.cesare@gmail.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Changbin Du <changbin.du@gmail.com>
Link: http://lkml.kernel.org/r/20200429135328.26976-1-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 266150c94c ]
Realloc of size zero is a free not an error, avoid this causing a double
free. Caught by clang's address sanitizer:
==2634==ERROR: AddressSanitizer: attempting double-free on 0x6020000015f0 in thread T0:
#0 0x5649659297fd in free llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:123:3
#1 0x5649659e9251 in __zfree tools/lib/zalloc.c:13:2
#2 0x564965c0f92c in mem2node__exit tools/perf/util/mem2node.c:114:2
#3 0x564965a08b4c in perf_c2c__report tools/perf/builtin-c2c.c:2867:2
#4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10
#5 0x564965944348 in run_builtin tools/perf/perf.c:312:11
#6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8
#7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2
#8 0x564965942e41 in main tools/perf/perf.c:538:3
0x6020000015f0 is located 0 bytes inside of 1-byte region [0x6020000015f0,0x6020000015f1)
freed by thread T0 here:
#0 0x564965929da3 in realloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x564965c0f55e in mem2node__init tools/perf/util/mem2node.c:97:16
#2 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8
#3 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10
#4 0x564965944348 in run_builtin tools/perf/perf.c:312:11
#5 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8
#6 0x5649659440c4 in run_argv tools/perf/perf.c:408:2
#7 0x564965942e41 in main tools/perf/perf.c:538:3
previously allocated by thread T0 here:
#0 0x564965929c42 in calloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x5649659e9220 in zalloc tools/lib/zalloc.c:8:9
#2 0x564965c0f32d in mem2node__init tools/perf/util/mem2node.c:61:12
#3 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8
#4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10
#5 0x564965944348 in run_builtin tools/perf/perf.c:312:11
#6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8
#7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2
#8 0x564965942e41 in main tools/perf/perf.c:538:3
v2: add a WARN_ON_ONCE when the free condition arises.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200320182347.87675-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc3d870e41 ]
Presently the list initialization is done only in
dynamic-resolution-change state, which leads to list corruptions
and use-after-free. Init list_head unconditionally in
vdec_stop_capture called by vb2 stop_streaming without takeing
into account current codec state.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bea0c5c942 ]
Devlink health core conditions the reporter's recovery with the
expiration of the grace period. This is not relevant for the first
recovery. Explicitly demand that the grace period will only apply to
recoveries other than the first.
Fixes: c8e1da0bf9 ("devlink: Add health report functionality")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97fff7c8de ]
Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e98fa02c4f ]
There is a race window in which an entity begins throttling before quota
is added to the pool, but does not finish throttling until after we have
finished with distribute_cfs_runtime(). This entity is not observed by
distribute_cfs_runtime() because it was not on the throttled list at the
time that distribution was running. This race manifests as rare
period-length statlls for such entities.
Rather than heavy-weight the synchronization with the progress of
distribution, we can fix this by aborting throttling if bandwidth has
become available. Otherwise, we immediately add the entity to the
throttled list so that it can be observed by a subsequent distribution.
Additionally, we can remove the case of adding the throttled entity to
the head of the throttled list, and simply always add to the tail.
Thanks to 26a8b12747, distribute_cfs_runtime() no longer holds onto
its own pool of runtime. This means that if we do hit the !assign and
distribute_running case, we know that distribution is about to end.
Signed-off-by: Paul Turner <pjt@google.com>
Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/20200410225208.109717-2-joshdon@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98448cdfe7 ]
We don't need to be quite as strict about mismatched AArch32 support,
which is good because the friendly hardware folks have been busy
mismatching this to their hearts' content.
* We don't care about EL2 or EL3 (there are silly comments concerning
the latter, so remove those)
* EL1 support is gated by the ARM64_HAS_32BIT_EL1 capability and handled
gracefully when a mismatch occurs
* EL0 support is gated by the ARM64_HAS_32BIT_EL0 capability and handled
gracefully when a mismatch occurs
Relax the AArch32 checks to FTR_NONSTRICT.
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200421142922.18950-8-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 969ce8b526 ]
It's likely that the vcpu fails to handle all virtual interrupts if
userspace decides to destroy it, leaving the pending ones stay in the
ap_list. If the un-handled one is a LPI, its vgic_irq structure will
be eventually leaked because of an extra refcount increment in
vgic_queue_irq_unlock().
This was detected by kmemleak on almost every guest destroy, the
backtrace is as follows:
unreferenced object 0xffff80725aed5500 (size 128):
comm "CPU 5/KVM", pid 40711, jiffies 4298024754 (age 166366.512s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 01 a9 73 6d 80 ff ff ...........sm...
c8 61 ee a9 00 20 ff ff 28 1e 55 81 6c 80 ff ff .a... ..(.U.l...
backtrace:
[<000000004bcaa122>] kmem_cache_alloc_trace+0x2dc/0x418
[<0000000069c7dabb>] vgic_add_lpi+0x88/0x418
[<00000000bfefd5c5>] vgic_its_cmd_handle_mapi+0x4dc/0x588
[<00000000cf993975>] vgic_its_process_commands.part.5+0x484/0x1198
[<000000004bd3f8e3>] vgic_its_process_commands+0x50/0x80
[<00000000b9a65b2b>] vgic_mmio_write_its_cwriter+0xac/0x108
[<0000000009641ebb>] dispatch_mmio_write+0xd0/0x188
[<000000008f79d288>] __kvm_io_bus_write+0x134/0x240
[<00000000882f39ac>] kvm_io_bus_write+0xe0/0x150
[<0000000078197602>] io_mem_abort+0x484/0x7b8
[<0000000060954e3c>] kvm_handle_guest_abort+0x4cc/0xa58
[<00000000e0d0cd65>] handle_exit+0x24c/0x770
[<00000000b44a7fad>] kvm_arch_vcpu_ioctl_run+0x460/0x1988
[<0000000025fb897c>] kvm_vcpu_ioctl+0x4f8/0xee0
[<000000003271e317>] do_vfs_ioctl+0x160/0xcd8
[<00000000e7f39607>] ksys_ioctl+0x98/0xd8
Fix it by retiring all pending LPIs in the ap_list on the destroy path.
p.s. I can also reproduce it on a normal guest shutdown. It is because
userspace still send LPIs to vcpu (through KVM_SIGNAL_MSI ioctl) while
the guest is being shutdown and unable to handle it. A little strange
though and haven't dig further...
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
[maz: moved the distributor deallocation down to avoid an UAF splat]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200414030349.625-2-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44b8fb6eaa ]
After registering character device the file operation callbacks can be
called. The open callback registers interrupt handler.
Therefore interrupt handler can execute in parallel with rest of the init
function. To avoid such data race initialize telclk_interrupt variable
and struct alarm_events before registering character device.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200417153451.1551-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b849dd84b6 ]
While trying to "dd" to the block device for a USB stick, I
encountered a hung task warning (blocked for > 120 seconds). I
managed to come up with an easy way to reproduce this on my system
(where /dev/sdb is the block device for my USB stick) with:
while true; do dd if=/dev/zero of=/dev/sdb bs=4M; done
With my reproduction here are the relevant bits from the hung task
detector:
INFO: task udevd:294 blocked for more than 122 seconds.
...
udevd D 0 294 1 0x00400008
Call trace:
...
mutex_lock_nested+0x40/0x50
__blkdev_get+0x7c/0x3d4
blkdev_get+0x118/0x138
blkdev_open+0x94/0xa8
do_dentry_open+0x268/0x3a0
vfs_open+0x34/0x40
path_openat+0x39c/0xdf4
do_filp_open+0x90/0x10c
do_sys_open+0x150/0x3c8
...
...
Showing all locks held in the system:
...
1 lock held by dd/2798:
#0: ffffff814ac1a3b8 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x50/0x204
...
dd D 0 2798 2764 0x00400208
Call trace:
...
schedule+0x8c/0xbc
io_schedule+0x1c/0x40
wait_on_page_bit_common+0x238/0x338
__lock_page+0x5c/0x68
write_cache_pages+0x194/0x500
generic_writepages+0x64/0xa4
blkdev_writepages+0x24/0x30
do_writepages+0x48/0xa8
__filemap_fdatawrite_range+0xac/0xd8
filemap_write_and_wait+0x30/0x84
__blkdev_put+0x88/0x204
blkdev_put+0xc4/0xe4
blkdev_close+0x28/0x38
__fput+0xe0/0x238
____fput+0x1c/0x28
task_work_run+0xb0/0xe4
do_notify_resume+0xfc0/0x14bc
work_pending+0x8/0x14
The problem appears related to the fact that my USB disk is terribly
slow and that I have a lot of RAM in my system to cache things.
Specifically my writes seem to be happening at ~15 MB/s and I've got
~4 GB of RAM in my system that can be used for buffering. To write 4
GB of buffer to disk thus takes ~4000 MB / ~15 MB/s = ~267 seconds.
The 267 second number is a problem because in __blkdev_put() we call
sync_blockdev() while holding the bd_mutex. Any other callers who
want the bd_mutex will be blocked for the whole time.
The problem is made worse because I believe blkdev_put() specifically
tells other tasks (namely udev) to go try to access the device at right
around the same time we're going to hold the mutex for a long time.
Putting some traces around this (after disabling the hung task detector),
I could confirm:
dd: 437.608600: __blkdev_put() right before sync_blockdev() for sdb
udevd: 437.623901: blkdev_open() right before blkdev_get() for sdb
dd: 661.468451: __blkdev_put() right after sync_blockdev() for sdb
udevd: 663.820426: blkdev_open() right after blkdev_get() for sdb
A simple fix for this is to realize that sync_blockdev() works fine if
you're not holding the mutex. Also, it's not the end of the world if
you sync a little early (though it can have performance impacts).
Thus we can make a guess that we're going to need to do the sync and
then do it without holding the mutex. We still do one last sync with
the mutex but it should be much, much faster.
With this, my hung task warnings for my test case are gone.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bec49a9e05 ]
When it is not possible for a non-privilege perf command to monitor at
the kernel level (:k), the fallback code forces a :u. That works if the
event was previously monitoring both levels. But if the event was
already constrained to kernel only, then it does not make sense to
restrict it to user only.
Given the code works by exclusion, a kernel only event would have:
attr->exclude_user = 1
The fallback code would add:
attr->exclude_kernel = 1
In the end the end would not monitor in either the user level or kernel
level. In other words, it would count nothing.
An event programmed to monitor kernel only cannot be switched to user
only without seriously warning the user.
This patch forces an error in this case to make it clear the request
cannot really be satisfied.
Behavior with paranoid 1:
$ sudo bash -c "echo 1 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Performance counter stats for 'sleep 1':
1,520,413 cycles:k
1.002361664 seconds time elapsed
0.002480000 seconds user
0.000000000 seconds sys
Old behavior with paranoid 2:
$ sudo bash -c "echo 2 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Performance counter stats for 'sleep 1':
0 cycles:ku
1.002358127 seconds time elapsed
0.002384000 seconds user
0.000000000 seconds sys
New behavior with paranoid 2:
$ sudo bash -c "echo 2 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Error:
You may not have permission to collect stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
which controls use of the performance events system by
unprivileged users (without CAP_PERFMON or CAP_SYS_ADMIN).
The current value is 2:
-1: Allow use of (almost) all events by all users
Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
>= 0: Disallow ftrace function tracepoint by users without CAP_PERFMON or CAP_SYS_ADMIN
Disallow raw tracepoint access by users without CAP_SYS_PERFMON or CAP_SYS_ADMIN
>= 1: Disallow CPU event access by users without CAP_PERFMON or CAP_SYS_ADMIN
>= 2: Disallow kernel profiling by users without CAP_PERFMON or CAP_SYS_ADMIN
To make this setting permanent, edit /etc/sysctl.conf too, e.g.:
kernel.perf_event_paranoid = -1
v2 of this patch addresses the review feedback from jolsa@redhat.com.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200414161550.225588-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7289fdb5dc ]
Fixes a NULL pointer dereference, caused by the PIT firing an interrupt
before the interrupt table has been initialized.
SET_PIT2 can race with the creation of the IRQchip. In particular,
if SET_PIT2 is called with a low PIT timer period (after the creation of
the IOAPIC, but before the instantiation of the irq routes), the PIT can
fire an interrupt at an uninitialized table.
Signed-off-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200416191152.259434-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aec7db3b13 ]
I made a mistake with my previous fix, I assumed that we didn't need to
mess with the reloc roots once we were out of the part of relocation where
we are actually moving the extents.
The subtle thing that I missed is that btrfs_init_reloc_root() also
updates the last_trans for the reloc root when we do
btrfs_record_root_in_trans() for the corresponding fs_root. I've added a
comment to make sure future me doesn't make this mistake again.
This showed up as a WARN_ON() in btrfs_copy_root() because our
last_trans didn't == the current transid. This could happen if we
snapshotted a fs root with a reloc root after we set
rc->create_reloc_tree = 0, but before we actually merge the reloc root.
Worth mentioning that the regression produced the following warning
when running snapshot creation and balance in parallel:
BTRFS info (device sdc): relocating block group 30408704 flags metadata|dup
------------[ cut here ]------------
WARNING: CPU: 0 PID: 12823 at fs/btrfs/ctree.c:191 btrfs_copy_root+0x26f/0x430 [btrfs]
CPU: 0 PID: 12823 Comm: btrfs Tainted: G W 5.6.0-rc7-btrfs-next-58 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:btrfs_copy_root+0x26f/0x430 [btrfs]
RSP: 0018:ffffb96e044279b8 EFLAGS: 00010202
RAX: 0000000000000009 RBX: ffff9da70bf61000 RCX: ffffb96e04427a48
RDX: ffff9da733a770c8 RSI: ffff9da70bf61000 RDI: ffff9da694163818
RBP: ffff9da733a770c8 R08: fffffffffffffff8 R09: 0000000000000002
R10: ffffb96e044279a0 R11: 0000000000000000 R12: ffff9da694163818
R13: fffffffffffffff8 R14: ffff9da6d2512000 R15: ffff9da714cdac00
FS: 00007fdeacf328c0(0000) GS:ffff9da735e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a2a5b8a118 CR3: 00000001eed78002 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? create_reloc_root+0x49/0x2b0 [btrfs]
? kmem_cache_alloc_trace+0xe5/0x200
create_reloc_root+0x8b/0x2b0 [btrfs]
btrfs_reloc_post_snapshot+0x96/0x5b0 [btrfs]
create_pending_snapshot+0x610/0x1010 [btrfs]
create_pending_snapshots+0xa8/0xd0 [btrfs]
btrfs_commit_transaction+0x4c7/0xc50 [btrfs]
? btrfs_mksubvol+0x3cd/0x560 [btrfs]
btrfs_mksubvol+0x455/0x560 [btrfs]
__btrfs_ioctl_snap_create+0x15f/0x190 [btrfs]
btrfs_ioctl_snap_create_v2+0xa4/0xf0 [btrfs]
? mem_cgroup_commit_charge+0x6e/0x540
btrfs_ioctl+0x12d8/0x3760 [btrfs]
? do_raw_spin_unlock+0x49/0xc0
? _raw_spin_unlock+0x29/0x40
? __handle_mm_fault+0x11b3/0x14b0
? ksys_ioctl+0x92/0xb0
ksys_ioctl+0x92/0xb0
? trace_hardirqs_off_thunk+0x1a/0x1c
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5c/0x280
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fdeabd3bdd7
Fixes: 2abc726ab4 ("btrfs: do not init a reloc root if we aren't relocating")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4c8dd6ef8 ]
The HD-audio controller does system-suspend and resume operations by
directly calling its helpers __azx_runtime_suspend() and
__azx_runtime_resume(). However, in general, we don't have to resume
always the device fully at the system resume; typically, if a device
has been runtime-suspended, we can leave it to runtime resume.
Usually for achieving this, the driver would call
pm_runtime_force_suspend() and pm_runtime_force_resume() pairs in the
system suspend and resume ops. Unfortunately, this doesn't work for
the resume path in our case. For handling the jack detection at the
system resume, a child codec device may need the (literally) forcibly
resume even if it's been runtime-suspended, and for that, the
controller device must be also resumed even if it's been suspended.
This patch is an attempt to improve the situation. It replaces the
direct __azx_runtime_suspend()/_resume() calls with with
pm_runtime_force_suspend() and pm_runtime_force_resume() with a slight
trick as we've done for the codec side. More exactly:
- azx_has_pm_runtime() check is dropped from azx_runtime_suspend() and
azx_runtime_resume(), so that it can be properly executed from the
system-suspend/resume path
- The WAKEEN handling depends on the card's power state now; it's set
and cleared only for the runtime-suspend
- azx_resume() checks whether any codec may need the forcible resume
beforehand. If the forcible resume is required, it does temporary
PM refcount up/down for actually triggering the runtime resume.
- A new helper function, hda_codec_need_resume(), is introduced for
checking whether the codec needs a forcible runtime-resume, and the
existing code is rewritten with that.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09ef5283fd ]
On passing requirement to vm_unmapped_area, arch_get_unmapped_area and
arch_get_unmapped_area_topdown did not set align_offset. Internally on
both unmapped_area and unmapped_area_topdown, if info->align_mask is 0,
then info->align_offset was meaningless.
But commit df529cabb7 ("mm: mmap: add trace point of
vm_unmapped_area") always prints info->align_offset even though it is
uninitialized.
Fix this uninitialized value issue by setting it to 0 explicitly.
Before:
vm_unmapped_area: addr=0x755b155000 err=0 total_vm=0x15aaf0 flags=0x1 len=0x109000 lo=0x8000 hi=0x75eed48000 mask=0x0 ofs=0x4022
After:
vm_unmapped_area: addr=0x74a4ca1000 err=0 total_vm=0x168ab1 flags=0x1 len=0x9000 lo=0x8000 hi=0x753d94b000 mask=0x0 ofs=0x0
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20200409094035.19457-1-jaewon31.kim@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04bef61e5d ]
kfd_pre_reset will free mem_objs allocated by kfd_gtt_sa_allocate
Without this change, sriov tdr code path will never free those allocated
memories and get memory leak.
v2:add a bugfix for kiq ring test fail
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62849a9612 ]
The kernel test robot triggered a warning with the following race:
task-ctx A interrupt-ctx B
worker
-> process_one_work()
-> work_item()
-> schedule();
-> sched_submit_work()
-> wq_worker_sleeping()
-> ->sleeping = 1
atomic_dec_and_test(nr_running)
__schedule(); *interrupt*
async_page_fault()
-> local_irq_enable();
-> schedule();
-> sched_submit_work()
-> wq_worker_sleeping()
-> if (WARN_ON(->sleeping)) return
-> __schedule()
-> sched_update_worker()
-> wq_worker_running()
-> atomic_inc(nr_running);
-> ->sleeping = 0;
-> sched_update_worker()
-> wq_worker_running()
if (!->sleeping) return
In this context the warning is pointless everything is fine.
An interrupt before wq_worker_sleeping() will perform the ->sleeping
assignment (0 -> 1 > 0) twice.
An interrupt after wq_worker_sleeping() will trigger the warning and
nr_running will be decremented (by A) and incremented once (only by B, A
will skip it). This is the case until the ->sleeping is zeroed again in
wq_worker_running().
Remove the WARN statement because this condition may happen. Document
that preemption around wq_worker_sleeping() needs to be disabled to
protect ->sleeping and not just as an optimisation.
Fixes: 6d25be5782 ("sched/core, workqueues: Distangle worker accounting from rq lock")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: https://lkml.kernel.org/r/20200327074308.GY11705@shao2-debian
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21f9024355 ]
In case rdma accept fails at nvmet_rdma_queue_connect(), release work is
scheduled. Later on, a new RDMA CM event may arrive since we didn't
destroy the cm-id and call nvmet_rdma_queue_connect_fail(), which
schedule another release work. This will cause calling
nvmet_rdma_free_queue twice. To fix this we implicitly destroy the cm_id
with non-zero ret code, which guarantees that new rdma_cm events will
not arrive afterwards. Also add a qp pointer to nvmet_rdma_queue
structure, so we can use it when the cm_id pointer is NULL or was
destroyed.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fab7dc477 ]
Move the test for whether a task is already queued to prevent
corruption of the timer list in __rpc_sleep_on_priority_timeout().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5644e1fbbf ]
pgdat->kswapd_classzone_idx could be accessed concurrently in
wakeup_kswapd(). Plain writes and reads without any lock protection
result in data races. Fix them by adding a pair of READ|WRITE_ONCE() as
well as saving a branch (compilers might well optimize the original code
in an unintentional way anyway). While at it, also take care of
pgdat->kswapd_order and non-kswapd threads in allow_direct_reclaim(). The
data races were reported by KCSAN,
BUG: KCSAN: data-race in wakeup_kswapd / wakeup_kswapd
write to 0xffff9f427ffff2dc of 4 bytes by task 7454 on cpu 13:
wakeup_kswapd+0xf1/0x400
wakeup_kswapd at mm/vmscan.c:3967
wake_all_kswapds+0x59/0xc0
wake_all_kswapds at mm/page_alloc.c:4241
__alloc_pages_slowpath+0xdcc/0x1290
__alloc_pages_slowpath at mm/page_alloc.c:4512
__alloc_pages_nodemask+0x3bb/0x450
alloc_pages_vma+0x8a/0x2c0
do_anonymous_page+0x16e/0x6f0
__handle_mm_fault+0xcd5/0xd40
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
1 lock held by mtest01/7454:
#0: ffff9f425afe8808 (&mm->mmap_sem#2){++++}, at:
do_page_fault+0x143/0x6f9
do_user_addr_fault at arch/x86/mm/fault.c:1405
(inlined by) do_page_fault at arch/x86/mm/fault.c:1539
irq event stamp: 6944085
count_memcg_event_mm+0x1a6/0x270
count_memcg_event_mm+0x119/0x270
__do_softirq+0x34c/0x57c
irq_exit+0xa2/0xc0
read to 0xffff9f427ffff2dc of 4 bytes by task 7472 on cpu 38:
wakeup_kswapd+0xc8/0x400
wake_all_kswapds+0x59/0xc0
__alloc_pages_slowpath+0xdcc/0x1290
__alloc_pages_nodemask+0x3bb/0x450
alloc_pages_vma+0x8a/0x2c0
do_anonymous_page+0x16e/0x6f0
__handle_mm_fault+0xcd5/0xd40
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
1 lock held by mtest01/7472:
#0: ffff9f425a9ac148 (&mm->mmap_sem#2){++++}, at:
do_page_fault+0x143/0x6f9
irq event stamp: 6793561
count_memcg_event_mm+0x1a6/0x270
count_memcg_event_mm+0x119/0x270
__do_softirq+0x34c/0x57c
irq_exit+0xa2/0xc0
BUG: KCSAN: data-race in kswapd / wakeup_kswapd
write to 0xffff90973ffff2dc of 4 bytes by task 820 on cpu 6:
kswapd+0x27c/0x8d0
kthread+0x1e0/0x200
ret_from_fork+0x27/0x50
read to 0xffff90973ffff2dc of 4 bytes by task 6299 on cpu 0:
wakeup_kswapd+0xf3/0x450
wake_all_kswapds+0x59/0xc0
__alloc_pages_slowpath+0xdcc/0x1290
__alloc_pages_nodemask+0x3bb/0x450
alloc_pages_vma+0x8a/0x2c0
do_anonymous_page+0x170/0x700
__handle_mm_fault+0xc9f/0xd00
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/1582749472-5171-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 218209487c ]
si->inuse_pages could be accessed concurrently as noticed by KCSAN,
write to 0xffff98b00ebd04dc of 4 bytes by task 82262 on cpu 92:
swap_range_free+0xbe/0x230
swap_range_free at mm/swapfile.c:719
swapcache_free_entries+0x1be/0x250
free_swap_slot+0x1c8/0x220
__swap_entry_free.constprop.19+0xa3/0xb0
free_swap_and_cache+0x53/0xa0
unmap_page_range+0x7e0/0x1ce0
unmap_single_vma+0xcd/0x170
unmap_vmas+0x18b/0x220
exit_mmap+0xee/0x220
mmput+0xe7/0x240
do_exit+0x598/0xfd0
do_group_exit+0x8b/0x180
get_signal+0x293/0x13d0
do_signal+0x37/0x5d0
prepare_exit_to_usermode+0x1b7/0x2c0
ret_from_intr+0x32/0x42
read to 0xffff98b00ebd04dc of 4 bytes by task 82499 on cpu 46:
try_to_unuse+0x86b/0xc80
try_to_unuse at mm/swapfile.c:2185
__x64_sys_swapoff+0x372/0xd40
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The plain reads in try_to_unuse() are outside si->lock critical section
which result in data races that could be dangerous to be used in a loop.
Fix them by adding READ_ONCE().
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/1582578903-29294-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faffdfa04f ]
Mount failure issue happens under the scenario: Application forked dozens
of threads to mount the same number of cramfs images separately in docker,
but several mounts failed with high probability. Mount failed due to the
checking result of the page(read from the superblock of loop dev) is not
uptodate after wait_on_page_locked(page) returned in function cramfs_read:
wait_on_page_locked(page);
if (!PageUptodate(page)) {
...
}
The reason of the checking result of the page not uptodate: systemd-udevd
read the loopX dev before mount, because the status of loopX is Lo_unbound
at this time, so loop_make_request directly trigger the calling of io_end
handler end_buffer_async_read, which called SetPageError(page). So It
caused the page can't be set to uptodate in function
end_buffer_async_read:
if(page_uptodate && !PageError(page)) {
SetPageUptodate(page);
}
Then mount operation is performed, it used the same page which is just
accessed by systemd-udevd above, Because this page is not uptodate, it
will launch a actual read via submit_bh, then wait on this page by calling
wait_on_page_locked(page). When the I/O of the page done, io_end handler
end_buffer_async_read is called, because no one cleared the page
error(during the whole read path of mount), which is caused by
systemd-udevd reading, so this page is still in "PageError" status, which
can't be set to uptodate in function end_buffer_async_read, then caused
mount failure.
But sometimes mount succeed even through systemd-udeved read loopX dev
just before, The reason is systemd-udevd launched other loopX read just
between step 3.1 and 3.2, the steps as below:
1, loopX dev default status is Lo_unbound;
2, systemd-udved read loopX dev (page is set to PageError);
3, mount operation
1) set loopX status to Lo_bound;
==>systemd-udevd read loopX dev<==
2) read loopX dev(page has no error)
3) mount succeed
As the loopX dev status is set to Lo_bound after step 3.1, so the other
loopX dev read by systemd-udevd will go through the whole I/O stack, part
of the call trace as below:
SYS_read
vfs_read
do_sync_read
blkdev_aio_read
generic_file_aio_read
do_generic_file_read:
ClearPageError(page);
mapping->a_ops->readpage(filp, page);
here, mapping->a_ops->readpage() is blkdev_readpage. In latest kernel,
some function name changed, the call trace as below:
blkdev_read_iter
generic_file_read_iter
generic_file_buffered_read:
/*
* A previous I/O error may have been due to temporary
* failures, eg. mutipath errors.
* Pg_error will be set again if readpage fails.
*/
ClearPageError(page);
/* Start the actual read. The read will unlock the page*/
error=mapping->a_ops->readpage(flip, page);
We can see ClearPageError(page) is called before the actual read,
then the read in step 3.2 succeed.
This patch is to add the calling of ClearPageError just before the actual
read of read path of cramfs mount. Without the patch, the call trace as
below when performing cramfs mount:
do_mount
cramfs_read
cramfs_blkdev_read
read_cache_page
do_read_cache_page:
filler(data, page);
or
mapping->a_ops->readpage(data, page);
With the patch, the call trace as below when performing mount:
do_mount
cramfs_read
cramfs_blkdev_read
read_cache_page:
do_read_cache_page:
ClearPageError(page); <== new add
filler(data, page);
or
mapping->a_ops->readpage(data, page);
With the patch, mount operation trigger the calling of
ClearPageError(page) before the actual read, the page has no error if no
additional page error happen when I/O done.
Signed-off-by: Xianting Tian <xianting_tian@126.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: <yubin@h3c.com>
Link: http://lkml.kernel.org/r/1583318844-22971-1-git-send-email-xianting_tian@126.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0d14fc43d ]
Clang warns:
mm/kmemleak.c:1955:28: warning: array comparison always evaluates to a constant [-Wtautological-compare]
if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)
^
mm/kmemleak.c:1955:60: warning: array comparison always evaluates to a constant [-Wtautological-compare]
if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)
These are not true arrays, they are linker defined symbols, which are just
addresses. Using the address of operator silences the warning and does
not change the resulting assembly with either clang/ld.lld or gcc/ld
(tested with diff + objdump -Dr).
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/895
Link: http://lkml.kernel.org/r/20200220051551.44000-1-natechancellor@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a36e8ba60b ]
IMC(In-memory Collection Counters) does performance monitoring in
two different modes, i.e accumulation mode(core-imc and thread-imc events),
and trace mode(trace-imc events). A cpu thread can either be in
accumulation-mode or trace-mode at a time and this is done via the LDBAR
register in POWER architecture. The current design does not address the
races between thread-imc and trace-imc events.
Patch implements a global id and lock to avoid the races between
core, trace and thread imc events. With this global id-lock
implementation, the system can either run core, thread or trace imc
events at a time. i.e. to run any core-imc events, thread/trace imc events
should not be enabled/monitored.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200313055238.8656-1-anju@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08ca8b21f7 ]
When a subrequest is being detached from the subgroup, we want to
ensure that it is not holding the group lock, or in the process
of waiting for the group lock.
Fixes: 5b2b5187fa ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8edf5332c3 ]
Without this commit, a PCIe hotplug port can stop generating interrupts on
hotplug events, so device adds and removals will not be seen:
The pciehp interrupt handler pciehp_isr() reads the Slot Status register
and then writes back to it to clear the bits that caused the interrupt. If
a different interrupt event bit gets set between the read and the write,
pciehp_isr() returns without having cleared all of the interrupt event
bits. If this happens when the MSI isn't masked (which by default it isn't
in handle_edge_irq(), and which it will never be when MSI per-vector
masking is not supported), we won't get any more hotplug interrupts from
that device.
That is expected behavior, according to the PCIe Base Spec r5.0, section
6.7.3.4, "Software Notification of Hot-Plug Events".
Because the Presence Detect Changed and Data Link Layer State Changed event
bits can both get set at nearly the same time when a device is added or
removed, this is more likely to happen than it might seem. The issue was
found (and can be reproduced rather easily) by connecting and disconnecting
an NVMe storage device on at least one system model where the NVMe devices
were being connected to an AMD PCIe port (PCI device 0x1022/0x1483).
Fix the issue by modifying pciehp_isr() to loop back and re-read the Slot
Status register immediately after writing to it, until it sees that all of
the event status bits have been cleared.
[lukas: drop loop count limitation, write "events" instead of "status",
don't loop back in INTx and poll modes, tweak code comment & commit msg]
Link: https://lore.kernel.org/r/78b4ced5072bfe6e369d20e8b47c279b8c7af12e.1582121613.git.lukas@wunner.de
Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c6cd7021a ]
The Miditech MIDIFACE 16x16 (USB ID 1290:1749) has more than one extra
endpoint descriptor.
The first extra descriptor is: 0x06 0x30 0x00 0x00 0x00 0x00
As the code in snd_usbmidi_get_ms_info() looks only at the
first extra descriptor to find USB_DT_CS_ENDPOINT the device
as such is recognized but there is neither input nor output
configured.
The patch iterates through the extra descriptors to find the
proper one. With this patch the device is correctly configured.
Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Link: https://lore.kernel.org/r/1c3b431a86f69e1d60745b6110cdb93c299f120b.camel@domdv.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acc5af3efa ]
In “ubifs_check_node”, when the value of "node_len" is abnormal,
the code will goto label of "out_len" for execution. Then, in the
following "ubifs_dump_node", if inode type is "UBIFS_DATA_NODE",
in "print_hex_dump", an out-of-bounds access may occur due to the
wrong "ch->len".
Therefore, when the value of "node_len" is abnormal, data length
should to be adjusted to a reasonable safe range. At this time,
structured data is not credible, so dump the corrupted data directly
for analysis.
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81423c7855 ]
When inodes with extended attributes are evicted, xent is not freed in one
exit branch.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Fixes: 9ca2d73264 ("ubifs: Limit number of xattrs per inode")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72e0ef0e5f ]
On some EFI systems, the video BIOS is provided by the EFI firmware. The
boot stub code stores the physical address of the ROM image in pdev->rom.
Currently we attempt to access this pointer using phys_to_virt(), which
doesn't work with CONFIG_HIGHMEM.
On these systems, attempting to load the radeon module on a x86_32 kernel
can result in the following:
BUG: unable to handle page fault for address: 3e8ed03c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
CPU: 0 PID: 317 Comm: systemd-udevd Not tainted 5.6.0-rc3-next-20200228 #2
Hardware name: Apple Computer, Inc. MacPro1,1/Mac-F4208DC8, BIOS MP11.88Z.005C.B08.0707021221 07/02/07
EIP: radeon_get_bios+0x5ed/0xe50 [radeon]
Code: 00 00 84 c0 0f 85 12 fd ff ff c7 87 64 01 00 00 00 00 00 00 8b 47 08 8b 55 b0 e8 1e 83 e1 d6 85 c0 74 1a 8b 55 c0 85 d2 74 13 <80> 38 55 75 0e 80 78 01 aa 0f 84 a4 03 00 00 8d 74 26 00 68 dc 06
EAX: 3e8ed03c EBX: 00000000 ECX: 3e8ed03c EDX: 00010000
ESI: 00040000 EDI: eec04000 EBP: eef3fc60 ESP: eef3fbe0
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010206
CR0: 80050033 CR2: 3e8ed03c CR3: 2ec77000 CR4: 000006d0
Call Trace:
r520_init+0x26/0x240 [radeon]
radeon_device_init+0x533/0xa50 [radeon]
radeon_driver_load_kms+0x80/0x220 [radeon]
drm_dev_register+0xa7/0x180 [drm]
radeon_pci_probe+0x10f/0x1a0 [radeon]
pci_device_probe+0xd4/0x140
Fix the issue by updating all drivers which can access a platform provided
ROM. Instead of calling the helper function pci_platform_rom() which uses
phys_to_virt(), call ioremap() directly on the pdev->rom.
radeon_read_platform_bios() previously directly accessed an __iomem
pointer. Avoid this by calling memcpy_fromio() instead of kmemdup().
pci_platform_rom() now has no remaining callers, so remove it.
Link: https://lore.kernel.org/r/20200319021623.5426-1-mikel@mikelr.com
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b25b60d7bf ]
'maxlen' is the total size of the destination buffer. There is only one
caller and this value is 256.
When we compute the size already used and what we would like to add in
the buffer, the trailling NULL character is not taken into account.
However, this trailling character will be added by the 'strcat' once we
have checked that we have enough place.
So, there is a off-by-one issue and 1 byte of the stack could be
erroneously overwridden.
Take into account the trailling NULL, when checking if there is enough
place in the destination buffer.
While at it, also replace a 'sprintf' by a safer 'snprintf', check for
output truncation and avoid a superfluous 'strlen'.
Fixes: dc9a16e49d ("svc: Add /proc/sys/sunrpc/transport files")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ cel: very minor fix to documenting comment
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e16e83a62 ]
Correct race condition where ioaccel is re-enabled before the raid_map is
updated. For RAID_1, RAID_1ADM, and RAID 5/6 there is a BUG_ON called which
is bad.
- Change event thread to disable ioaccel only. Send all requests down the
RAID path instead.
- Have rescan thread handle offload_enable.
- Since there is only one rescan allowed at a time, turning
offload_enabled on/off should not be racy. Each handler queues up a
rescan if one is already in progress.
- For timing diagram, offload_enabled is initially off due to a change
(transformation: splitmirror/remirror), ...
otbe = offload_to_be_enabled
oe = offload_enabled
Time Event Rescan Completion Request
Worker Worker Thread Thread
---- ------ ------ ---------- -------
T0 | | + UA |
T1 | + rescan started | 0x3f |
T2 + Event | | 0x0e |
T3 + Ack msg | | |
T4 | + if (!dev[i]->oe && | |
T5 | | dev[i]->otbe) | |
T6 | | get_raid_map | |
T7 + otbe = 1 | | |
T8 | | | |
T9 | + oe = otbe | |
T10 | | | + ioaccel request
T11 * BUG_ON
T0 - I/O completion with UA 0x3f 0x0e sets rescan flag.
T1 - rescan worker thread starts a rescan.
T2 - event comes in
T3 - event thread starts and issues "Acknowledge" message
...
T6 - rescan thread has bypassed code to reload new raid map.
...
T7 - event thread runs and sets offload_to_be_enabled
...
T9 - rescan thread turns on offload_enabled.
T10- request comes in and goes down ioaccel path.
T11- BUG_ON.
- After the patch is applied, ioaccel_enabled can only be re-enabled in
the re-scan thread.
Link: https://lore.kernel.org/r/158472877894.14200.7077843399036368335.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Matt Perricone <matt.perricone@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26e28deb81 ]
libiscsi calls the check_protection transport handler only if SCSI-Respose
is received. So, the handler is never called if iSCSI task is completed
for some other reason like a timeout or error handling. And this behavior
looks correct. But the iSER does not handle this case properly because it
puts a non-checked signature MR to the free pool. Then the error occurs at
reusing the MR because it is not allowed to invalidate a signature MR
without checking.
This commit adds an extra check to iser_unreg_mem_fastreg(), which is a
part of the task cleanup flow. Now the signature MR is checked there if it
is needed.
Link: https://lore.kernel.org/r/20200325151210.1548-1-sergeygo@mellanox.com
Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0ca2c35dd ]
The RXE driver doesn't set sys_image_guid and user space applications see
zeros. This causes to pyverbs tests to fail with the following traceback,
because the IBTA spec requires to have valid sys_image_guid.
Traceback (most recent call last):
File "./tests/test_device.py", line 51, in test_query_device
self.verify_device_attr(attr)
File "./tests/test_device.py", line 74, in verify_device_attr
assert attr.sys_image_guid != 0
In order to fix it, set sys_image_guid to be equal to node_guid.
Before:
5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid
0000:0000:0000:0000
After:
5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid
5054:00ff:feaa:5363
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200323112800.1444784-1-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27fb5a72f5 ]
I noticed that fsfreeze can take a very long time to freeze an XFS if
there happens to be a GETFSMAP caller running in the background. I also
happened to notice the following in dmesg:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 43492 at fs/xfs/xfs_super.c:853 xfs_quiesce_attr+0x83/0x90 [xfs]
Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 ip_set_hash_ip ip_set_hash_net xt_tcpudp xt_set ip_set_hash_mac ip_set nfnetlink ip6table_filter ip6_tables bfq iptable_filter sch_fq_codel ip_tables x_tables nfsv4 af_packet [last unloaded: xfs]
CPU: 2 PID: 43492 Comm: xfs_io Not tainted 5.6.0-rc4-djw #rc4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:xfs_quiesce_attr+0x83/0x90 [xfs]
Code: 7c 07 00 00 85 c0 75 22 48 89 df 5b e9 96 c1 00 00 48 c7 c6 b0 2d 38 a0 48 89 df e8 57 64 ff ff 8b 83 7c 07 00 00 85 c0 74 de <0f> 0b 48 89 df 5b e9 72 c1 00 00 66 90 0f 1f 44 00 00 41 55 41 54
RSP: 0018:ffffc900030f3e28 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff88802ac54000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff81e4a6f0 RDI: 00000000ffffffff
RBP: ffff88807859f070 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000010 R12: 0000000000000000
R13: ffff88807859f388 R14: ffff88807859f4b8 R15: ffff88807859f5e8
FS: 00007fad1c6c0fc0(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0c7d237000 CR3: 0000000077f01003 CR4: 00000000001606a0
Call Trace:
xfs_fs_freeze+0x25/0x40 [xfs]
freeze_super+0xc8/0x180
do_vfs_ioctl+0x70b/0x750
? __fget_files+0x135/0x210
ksys_ioctl+0x3a/0xb0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
These two things appear to be related. The assertion trips when another
thread initiates a fsmap request (which uses an empty transaction) after
the freezer waited for m_active_trans to hit zero but before the the
freezer executes the WARN_ON just prior to calling xfs_log_quiesce.
The lengthy delays in freezing happen because the freezer calls
xfs_wait_buftarg to clean out the buffer lru list. Meanwhile, the
GETFSMAP caller is continuing to grab and release buffers, which means
that it can take a very long time for the buffer lru list to empty out.
We fix both of these races by calling sb_start_write to obtain freeze
protection while using empty transactions for GETFSMAP and for metadata
scrubbing. The other two users occur during mount, during which time we
cannot fs freeze.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce1518139e ]
Calling nvme_sysfs_delete() when the controller is in the middle of
creation may cause several bugs. If the controller is in NEW state we
remove delete_controller file and don't delete the controller. The user
will not be able to use nvme disconnect command on that controller again,
although the controller may be active. Other bugs may happen if the
controller is in the middle of create_ctrl callback and
nvme_do_delete_ctrl() starts. For example, freeing I/O tagset at
nvme_do_delete_ctrl() before it was allocated at create_ctrl callback.
To fix all those races don't allow the user to delete the controller
before it was fully created.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b780d7415a ]
In case nvme_sysfs_delete() is called by the user before taking the ctrl
reference count, the ctrl may be freed during the creation and cause the
bug. Take the reference as soon as the controller is externally visible,
which is done by cdev_device_add() in nvme_init_ctrl(). Also take the
reference count at the core layer instead of taking it on each transport
separately.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 764e933209 ]
The nvme multipath error handling defaults to controller reset if the
error is unknown. There are, however, no existing nvme status codes that
indicate a reset should be used, and resetting causes unnecessary
disruption to the rest of IO.
Change nvme's error handling to first check if failover should happen.
If not, let the normal error handling take over rather than reset the
controller.
Based-on-a-patch-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Meneghini <johnm@netapp.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6914303824 ]
This changes perf_event_set_clock to use the new exec_update_mutex
instead of cred_guard_mutex.
This should be safe, as the credentials are only used for reading.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76518d3798 ]
This changes do_io_accounting to use the new exec_update_mutex
instead of cred_guard_mutex.
This fixes possible deadlocks when the trace is accessing
/proc/$pid/io for instance.
This should be safe, as the credentials are only used for reading.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2db9dbf71b ]
This changes lock_trace to use the new exec_update_mutex
instead of cred_guard_mutex.
This fixes possible deadlocks when the trace is accessing
/proc/$pid/stack for instance.
This should be safe, as the credentials are only used for reading,
and task->mm is updated on execve under the new exec_update_mutex.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 454e3126cb ]
This changes kcmp_epoll_target to use the new exec_update_mutex
instead of cred_guard_mutex.
This should be safe, as the credentials are only used for reading,
and furthermore ->mm and ->sighand are updated on execve,
but only under the new exec_update_mutex.
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2de4e82318 ]
This adds test cases for ptrace deadlocks.
Additionally fixes a compile problem in get_syscall_info.c,
observed with gcc-4.8.4:
get_syscall_info.c: In function 'get_syscall_info':
get_syscall_info.c:93:3: error: 'for' loop initial declarations are only
allowed in C99 mode
for (unsigned int i = 0; i < ARRAY_SIZE(args); ++i) {
^
get_syscall_info.c:93:3: note: use option -std=c99 or -std=gnu99 to compile
your code
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e74fabd39 ]
This fixes a deadlock in the tracer when tracing a multi-threaded
application that calls execve while more than one thread are running.
I observed that when running strace on the gcc test suite, it always
blocks after a while, when expect calls execve, because other threads
have to be terminated. They send ptrace events, but the strace is no
longer able to respond, since it is blocked in vm_access.
The deadlock is always happening when strace needs to access the
tracees process mmap, while another thread in the tracee starts to
execve a child process, but that cannot continue until the
PTRACE_EVENT_EXIT is handled and the WIFEXITED event is received:
strace D 0 30614 30584 0x00000000
Call Trace:
__schedule+0x3ce/0x6e0
schedule+0x5c/0xd0
schedule_preempt_disabled+0x15/0x20
__mutex_lock.isra.13+0x1ec/0x520
__mutex_lock_killable_slowpath+0x13/0x20
mutex_lock_killable+0x28/0x30
mm_access+0x27/0xa0
process_vm_rw_core.isra.3+0xff/0x550
process_vm_rw+0xdd/0xf0
__x64_sys_process_vm_readv+0x31/0x40
do_syscall_64+0x64/0x220
entry_SYSCALL_64_after_hwframe+0x44/0xa9
expect D 0 31933 30876 0x80004003
Call Trace:
__schedule+0x3ce/0x6e0
schedule+0x5c/0xd0
flush_old_exec+0xc4/0x770
load_elf_binary+0x35a/0x16c0
search_binary_handler+0x97/0x1d0
__do_execve_file.isra.40+0x5d4/0x8a0
__x64_sys_execve+0x49/0x60
do_syscall_64+0x64/0x220
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This changes mm_access to use the new exec_update_mutex
instead of cred_guard_mutex.
This patch is based on the following patch by Eric W. Biederman:
"[PATCH 0/5] Infrastructure to allow fixing exec deadlocks"
Link: https://lore.kernel.org/lkml/87v9ne5y4y.fsf_-_@x220.int.ebiederm.org/
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eea9673250 ]
The cred_guard_mutex is problematic as it is held over possibly
indefinite waits for userspace. The possible indefinite waits for
userspace that I have identified are: The cred_guard_mutex is held in
PTRACE_EVENT_EXIT waiting for the tracer. The cred_guard_mutex is
held over "put_user(0, tsk->clear_child_tid)" in exit_mm(). The
cred_guard_mutex is held over "get_user(futex_offset, ...") in
exit_robust_list. The cred_guard_mutex held over copy_strings.
The functions get_user and put_user can trigger a page fault which can
potentially wait indefinitely in the case of userfaultfd or if
userspace implements part of the page fault path.
In any of those cases the userspace process that the kernel is waiting
for might make a different system call that winds up taking the
cred_guard_mutex and result in deadlock.
Holding a mutex over any of those possibly indefinite waits for
userspace does not appear necessary. Add exec_update_mutex that will
just cover updating the process during exec where the permissions and
the objects pointed to by the task struct may be out of sync.
The plan is to switch the users of cred_guard_mutex to
exec_update_mutex one by one. This lets us move forward while still
being careful and not introducing any regressions.
Link: https://lore.kernel.org/lkml/20160921152946.GA24210@dhcp22.suse.cz/
Link: https://lore.kernel.org/lkml/AM6PR03MB5170B06F3A2B75EFB98D071AE4E60@AM6PR03MB5170.eurprd03.prod.outlook.com/
Link: https://lore.kernel.org/linux-fsdevel/20161102181806.GB1112@redhat.com/
Link: https://lore.kernel.org/lkml/20160923095031.GA14923@redhat.com/
Link: https://lore.kernel.org/lkml/20170213141452.GA30203@redhat.com/
Ref: 45c1a159b85b ("Add PTRACE_O_TRACEVFORKDONE and PTRACE_O_TRACEEXIT facilities.")
Ref: 456f17cd1a28 ("[PATCH] user-vm-unlock-2.5.31-A2")
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1ee7e1f5c ]
If '-o' was used more than 64 times in a single invocation of gpio-hammer,
this could lead to an overflow of the 'lines' array. This commit fixes
this by avoiding the overflow and giving a proper diagnostic back to the
user
Signed-off-by: Gabriel Ravier <gabravier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee44d0b788 ]
When we fail allocating the DMA buffers in axienet_dma_bd_init(), we
report this error, but carry on with initialisation nevertheless.
This leads to a kernel panic when the driver later wants to send a
packet, as it uses uninitialised data structures.
Make the axienet_device_reset() routine return an error value, as it
contains the DMA buffer initialisation. Make sure we propagate the error
up the chain and eventually fail the driver initialisation, to avoid
relying on non-initialised buffers.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cf4df30a9 ]
Terminate and flush DMA internal buffers, before pushing RX data to
higher layer. Otherwise, this will lead to data corruption, as driver
would end up pushing stale buffer data to higher layer while actual data
is still stuck inside DMA hardware and has yet not arrived at the
memory.
While at that, replace deprecated dmaengine_terminate_all() with
dmaengine_terminate_async().
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319110344.21348-2-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f19c3f6c81 ]
When port's throttle callback is called, it should stop pushing any more
data into TTY buffer to avoid buffer overflow. This means driver has to
stop HW from receiving more data and assert the HW flow control. For
UARTs with auto HW flow control (such as 8250_omap) manual assertion of
flow control line is not possible and only way is to allow RX FIFO to
fill up, thus trigger auto HW flow control logic.
Therefore make sure that 8250 generic IRQ handler does not drain data
when port is stopped (i.e UART_LSR_DR is unset in read_status_mask). Not
servicing, RX FIFO would trigger auto HW flow control when FIFO
occupancy reaches preset threshold, thus halting RX.
Since, error conditions in UART_LSR register are cleared just by reading
the register, data has to be drained in case there are FIFO errors, else
error information will lost.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319103230.16867-2-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b02e407cb ]
So far only the reset bit it set, but the handler executing the reset
is not scheduled. Therefore nothing will happen until some other action
schedules the handler. Improve this by ensuring that the handler is
scheduled.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a0afa0ecf ]
If we have an error while processing the reloc roots we could leak roots
that were added to rc->reloc_roots before we hit the error. We could
have also not removed the reloc tree mapping from our rb_tree, so clean
up any remaining nodes in the reloc root rb_tree.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use rbtree_postorder_for_each_entry_safe ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2abc726ab4 ]
We previously were checking if the root had a dead root before accessing
root->reloc_root in order to avoid a use-after-free type bug. However
this scenario happens after we've unset the reloc control, so we would
have been saved if we'd simply checked for fs_info->reloc_control. At
this point during relocation we no longer need to be creating new reloc
roots, so simply move this check above the reloc_root checks to avoid
any future races and confusion.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf2cbe044d ]
Clang warns:
../kernel/trace/trace.c:9335:33: warning: array comparison always
evaluates to true [-Wtautological-compare]
if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
^
1 warning generated.
These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning and
does not change the runtime result of the check (tested with some print
statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU).
Link: http://lkml.kernel.org/r/20200220051011.26113-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/893
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0478b4fc5f ]
If the opp table specifies opp-supported-hw as a property but the driver
has not set a supported hardware value the OPP subsystem will reject
all the table entries.
Set a "default" value that will match the default table entries but not
conflict with any possible real bin values. Also fix a small memory leak
and free the buffer allocated by nvmem_cell_read().
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dff3064c7 ]
On P9 DD2.2 due to a CPU defect some TM instructions need to be emulated by
KVM. This is handled at first by the hardware raising a softpatch interrupt
when certain TM instructions that need KVM assistance are executed in the
guest. Althought some TM instructions per Power ISA are invalid forms they
can raise a softpatch interrupt too. For instance, 'tresume.' instruction
as defined in the ISA must have bit 31 set (1), but an instruction that
matches 'tresume.' PO and XO opcode fields but has bit 31 not set (0), like
0x7cfe9ddc, also raises a softpatch interrupt. Similarly for 'treclaim.'
and 'trechkpt.' instructions with bit 31 = 0, i.e. 0x7c00075c and
0x7c0007dc, respectively. Hence, if a code like the following is executed
in the guest it will raise a softpatch interrupt just like a 'tresume.'
when the TM facility is enabled ('tabort. 0' in the example is used only
to enable the TM facility):
int main() { asm("tabort. 0; .long 0x7cfe9ddc;"); }
Currently in such a case KVM throws a complete trace like:
[345523.705984] WARNING: CPU: 24 PID: 64413 at arch/powerpc/kvm/book3s_hv_tm.c:211 kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.705985] Modules linked in: kvm_hv(E) xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat
iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ebtable_filter ebtables ip6table_filter
ip6_tables iptable_filter bridge stp llc sch_fq_codel ipmi_powernv at24 vmx_crypto ipmi_devintf ipmi_msghandler
ibmpowernv uio_pdrv_genirq kvm opal_prd uio leds_powernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp
libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456
async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear tg3
crct10dif_vpmsum crc32c_vpmsum ipr [last unloaded: kvm_hv]
[345523.706030] CPU: 24 PID: 64413 Comm: CPU 0/KVM Tainted: G W E 5.5.0+ #1
[345523.706031] NIP: c0080000072cb9c0 LR: c0080000072b5e80 CTR: c0080000085c7850
[345523.706034] REGS: c000000399467680 TRAP: 0700 Tainted: G W E (5.5.0+)
[345523.706034] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 24022428 XER: 00000000
[345523.706042] CFAR: c0080000072b5e7c IRQMASK: 0
GPR00: c0080000072b5e80 c000000399467910 c0080000072db500 c000000375ccc720
GPR04: c000000375ccc720 00000003fbec0000 0000a10395dda5a6 0000000000000000
GPR08: 000000007cfe9ddc 7cfe9ddc000005dc 7cfe9ddc7c0005dc c0080000072cd530
GPR12: c0080000085c7850 c0000003fffeb800 0000000000000001 00007dfb737f0000
GPR16: c0002001edcca558 0000000000000000 0000000000000000 0000000000000001
GPR20: c000000001b21258 c0002001edcca558 0000000000000018 0000000000000000
GPR24: 0000000001000000 ffffffffffffffff 0000000000000001 0000000000001500
GPR28: c0002001edcc4278 c00000037dd80000 800000050280f033 c000000375ccc720
[345523.706062] NIP [c0080000072cb9c0] kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.706065] LR [c0080000072b5e80] kvmppc_handle_exit_hv.isra.53+0x3e8/0x798 [kvm_hv]
[345523.706066] Call Trace:
[345523.706069] [c000000399467910] [c000000399467940] 0xc000000399467940 (unreliable)
[345523.706071] [c000000399467950] [c000000399467980] 0xc000000399467980
[345523.706075] [c0000003994679f0] [c0080000072bd1c4] kvmhv_run_single_vcpu+0xa1c/0xb80 [kvm_hv]
[345523.706079] [c000000399467ac0] [c0080000072bd8e0] kvmppc_vcpu_run_hv+0x5b8/0xb00 [kvm_hv]
[345523.706087] [c000000399467b90] [c0080000085c93cc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[345523.706095] [c000000399467bb0] [c0080000085c582c] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
[345523.706101] [c000000399467c40] [c0080000085b7498] kvm_vcpu_ioctl+0x3d0/0x7b0 [kvm]
[345523.706105] [c000000399467db0] [c0000000004adf9c] ksys_ioctl+0x13c/0x170
[345523.706107] [c000000399467e00] [c0000000004adff8] sys_ioctl+0x28/0x80
[345523.706111] [c000000399467e20] [c00000000000b278] system_call+0x5c/0x68
[345523.706112] Instruction dump:
[345523.706114] 419e0390 7f8a4840 409d0048 6d497c00 2f89075d 419e021c 6d497c00 2f8907dd
[345523.706119] 419e01c0 6d497c00 2f8905dd 419e00a4 <0fe00000> 38210040 38600000 ebc1fff0
and then treats the executed instruction as a 'nop'.
However the POWER9 User's Manual, in section "4.6.10 Book II Invalid
Forms", informs that for TM instructions bit 31 is in fact ignored, thus
for the TM-related invalid forms ignoring bit 31 and handling them like the
valid forms is an acceptable way to handle them. POWER8 behaves the same
way too.
This commit changes the handling of the cases here described by treating
the TM-related invalid forms that can generate a softpatch interrupt
just like their valid forms (w/ bit 31 = 1) instead of as a 'nop' and by
gently reporting any other unrecognized case to the host and treating it as
illegal instruction instead of throwing a trace and treating it as a 'nop'.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-By: Michael Neuling <mikey@neuling.org>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bede86a39d ]
When creating a cm_id during REQ the id immediately becomes visible to the
other MAD handlers, and shortly after the state is moved to IB_CM_REQ_RCVD
This allows cm_rej_handler() to run concurrently and free the work:
CPU 0 CPU1
cm_req_handler()
ib_create_cm_id()
cm_match_req()
id_priv->state = IB_CM_REQ_RCVD
cm_rej_handler()
cm_acquire_id()
spin_lock(&id_priv->lock)
switch (id_priv->state)
case IB_CM_REQ_RCVD:
cm_reset_to_idle()
kfree(id_priv->timewait_info);
goto destroy
destroy:
kfree(id_priv->timewait_info);
id_priv->timewait_info = NULL
Causing a double free or worse.
Do not free the timewait_info without also holding the
id_priv->lock. Simplify this entire flow by making the free unconditional
during cm_destroy_id() and removing the confusing special case error
unwind during creation of the timewait_info.
This also fixes a leak of the timewait if cm_destroy_id() is called in
IB_CM_ESTABLISHED with an XRC TGT QP. The state machine will be left in
ESTABLISHED while it needed to transition through IB_CM_TIMEWAIT to
release the timewait pointer.
Also fix a leak of the timewait_info if the caller mis-uses the API and
does ib_send_cm_reqs().
Fixes: a977049dac ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20200310092545.251365-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a451b12311 ]
In NFSv4, the lock stateids are tied to the lockowner, and the open stateid,
so that the action of closing the file also results in either an automatic
loss of the locks, or an error of the form NFS4ERR_LOCKS_HELD.
In practice this means we must not add new locks to the open stateid
after the close process has been invoked. In fact doing so, can result
in the following panic:
kernel BUG at lib/list_debug.c:51!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 2 PID: 1085 Comm: nfsd Not tainted 5.6.0-rc3+ #2
Hardware name: VMware, Inc. VMware7,1/440BX Desktop Reference Platform, BIOS VMW71.00V.14410784.B64.1908150010 08/15/2019
RIP: 0010:__list_del_entry_valid.cold+0x31/0x55
Code: 1a 3d 9b e8 74 10 c2 ff 0f 0b 48 c7 c7 f0 1a 3d 9b e8 66 10 c2 ff 0f 0b 48 89 f2 48 89 fe 48 c7 c7 b0 1a 3d 9b e8 52 10 c2 ff <0f> 0b 48 89 fe 4c 89 c2 48 c7 c7 78 1a 3d 9b e8 3e 10 c2 ff 0f 0b
RSP: 0018:ffffb296c1d47d90 EFLAGS: 00010246
RAX: 0000000000000054 RBX: ffff8ba032456ec8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8ba039e99cc8 RDI: ffff8ba039e99cc8
RBP: ffff8ba032456e60 R08: 0000000000000781 R09: 0000000000000003
R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ba009a4abe0
R13: ffff8ba032456e8c R14: 0000000000000000 R15: ffff8ba00adb01d8
FS: 0000000000000000(0000) GS:ffff8ba039e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb213f0b008 CR3: 00000001347de006 CR4: 00000000003606e0
Call Trace:
release_lock_stateid+0x2b/0x80 [nfsd]
nfsd4_free_stateid+0x1e9/0x210 [nfsd]
nfsd4_proc_compound+0x414/0x700 [nfsd]
? nfs4svc_decode_compoundargs+0x407/0x4c0 [nfsd]
nfsd_dispatch+0xc1/0x200 [nfsd]
svc_process_common+0x476/0x6f0 [sunrpc]
? svc_sock_secure_port+0x12/0x30 [sunrpc]
? svc_recv+0x313/0x9c0 [sunrpc]
? nfsd_svc+0x2d0/0x2d0 [nfsd]
svc_process+0xd4/0x110 [sunrpc]
nfsd+0xe3/0x140 [nfsd]
kthread+0xf9/0x130
? nfsd_destroy+0x50/0x50 [nfsd]
? kthread_park+0x90/0x90
ret_from_fork+0x1f/0x40
The fix is to ensure that lock creation tests for whether or not the
open stateid is unhashed, and to fail if that is the case.
Fixes: 659aefb68e ("nfsd: Ensure we don't recognise lock stateids after freeing them")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8d74ea3c0 ]
Synchronize with the results from the CRQs before continuing with
the initialization. This avoids trying to send TPM commands while
the rtce buffer has not been allocated, yet.
This patch fixes an existing race condition that may occurr if the
hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE
request sent during initialization and therefore the ibmvtpm->rtce_buf
has not been allocated at the time the first TPM command is sent.
Fixes: 132f762947 ("drivers/char/tpm: Add new device driver to support IBM vTPM")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e107cf869 ]
In xchk_dir_actor, we attempt to validate the directory hash structures
by performing a directory entry lookup by (hashed) name. If the lookup
returns ENOENT, that means that the hash information is corrupt. The
_process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cb5deb5bc ]
If we decide that a directory free block is corrupt, we must take care
not to leak a buffer pointer to the caller. After xfs_trans_brelse
returns, the buffer can be freed or reused, which means that we have to
set *bpp back to NULL.
Callers are supposed to notice the nonzero return value and not use the
buffer pointer, but we should code more defensively, even if all current
callers handle this situation correctly.
Fixes: de14c5f541 ("xfs: verify free block header fields")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cbd7814bb ]
SiFive's UART has a software controller clock divider that produces the
final baud rate clock. Whenever the clock that drives the UART is
changed this divider must be updated accordingly, and given that these
two events are controlled by software they cannot be done atomically.
During the period between updating the UART's driving clock and internal
divider the UART will transmit a different baud rate than what the user
has configured, which will probably result in a corrupted transmission
stream.
The SiFive UART has a FIFO, but due to an issue with the programming
interface there is no way to directly determine when the UART has
finished transmitting. We're essentially restricted to dead reckoning
in order to figure that out: we can use the FIFO's TX busy register to
figure out when the last frame has begun transmission and just delay for
a long enough that the last frame is guaranteed to get out.
As far as the actual implementation goes: I've modified the existing
existing clock notifier function to drain both the FIFO and the shift
register in on PRE_RATE_CHANGE. As far as I know there is no hardware
flow control in this UART, so there's no good way to ask the other end
to stop transmission while we can't receive (inserting software flow
control messages seems like a bad idea here).
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Tested-by: Yash Shah <yash.shah@sifive.com>
Link: https://lore.kernel.org/r/20200307042637.83728-1-palmer@dabbelt.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7463e2dc6 ]
The shifting of buf[3] by 24 bits to the left will be promoted to
a 32 bit signed int and then sign-extended to an unsigned long. In
the unlikely event that the the top bit of buf[3] is set then all
then all the upper bits end up as also being set because of
the sign-extension and this affect the ev->post_bit_error sum.
Fix this by using the temporary u32 variable bit_error to avoid
the sign-extension promotion. This also removes the need to do the
computation twice.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 267897a470 ("[media] tda10071: implement DVBv5 statistics")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9f5baa136 ]
When 'etm->instructions_sample_period' is less than
'tidq->period_instructions', the function cs_etm__sample() cannot handle
this case properly with its logic.
Let's see below flow as an example:
- If we set itrace option '--itrace=i4', then function cs_etm__sample()
has variables with initialized values:
tidq->period_instructions = 0
etm->instructions_sample_period = 4
- When the first packet is coming:
packet->instr_count = 10; the number of instructions executed in this
packet is 10, thus update period_instructions as below:
tidq->period_instructions = 0 + 10 = 10
instrs_over = 10 - 4 = 6
offset = 10 - 6 - 1 = 3
tidq->period_instructions = instrs_over = 6
- When the second packet is coming:
packet->instr_count = 10; in the second pass, assume 10 instructions
in the trace sample again:
tidq->period_instructions = 6 + 10 = 16
instrs_over = 16 - 4 = 12
offset = 10 - 12 - 1 = -3 -> the negative value
tidq->period_instructions = instrs_over = 12
So after handle these two packets, there have below issues:
The first issue is that cs_etm__instr_addr() returns the address within
the current trace sample of the instruction related to offset, so the
offset is supposed to be always unsigned value. But in fact, function
cs_etm__sample() might calculate a negative offset value (in handling
the second packet, the offset is -3) and pass to cs_etm__instr_addr()
with u64 type with a big positive integer.
The second issue is it only synthesizes 2 samples for sample period = 4.
In theory, every packet has 10 instructions so the two packets have
total 20 instructions, 20 instructions should generate 5 samples
(4 x 5 = 20). This is because cs_etm__sample() only calls once
cs_etm__synth_instruction_sample() to generate instruction sample per
range packet.
This patch fixes the logic in function cs_etm__sample(); the basic
idea for handling coming packet is:
- To synthesize the first instruction sample, it combines the left
instructions from the previous packet and the head of the new
packet; then generate continuous samples with sample period;
- At the tail of the new packet, if it has the rest instructions,
these instructions will be left for the sequential sample.
Suggested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8719b6d29d ]
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Message-Id: <20200304005049.5291-1-afzal.mohd.ma@gmail.com>
[heiko.carstens@de.ibm.com: replace pr_err with panic]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a33691c4c ]
Currently there are only 10 bytes to store the cpu-topology 'name'
information. Only 10 bytes copied into cluster/thread/core names.
If the cluster ID exceeds 2-digit number, it will result in the data
corruption, and ending up in a dead loop in the parsing routines. The
same applies to the thread names with more that 3-digit number.
This issue was found using the boundary tests under virtualised
environment like QEMU.
Let us increase the buffer to fix such potential issues.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Link: https://lore.kernel.org/r/1583294092-5929-1-git-send-email-prime.zeng@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3e5ea6ee5 ]
Jeff Moyer has reported that one of xfstests triggers a warning when run
on DAX-enabled filesystem:
WARNING: CPU: 76 PID: 51024 at mm/memory.c:2317 wp_page_copy+0xc40/0xd50
...
wp_page_copy+0x98c/0xd50 (unreliable)
do_wp_page+0xd8/0xad0
__handle_mm_fault+0x748/0x1b90
handle_mm_fault+0x120/0x1f0
__do_page_fault+0x240/0xd70
do_page_fault+0x38/0xd0
handle_page_fault+0x10/0x30
The warning happens on failed __copy_from_user_inatomic() which tries to
copy data into a CoW page.
This happens because of race between MADV_DONTNEED and CoW page fault:
CPU0 CPU1
handle_mm_fault()
do_wp_page()
wp_page_copy()
do_wp_page()
madvise(MADV_DONTNEED)
zap_page_range()
zap_pte_range()
ptep_get_and_clear_full()
<TLB flush>
__copy_from_user_inatomic()
sees empty PTE and fails
WARN_ON_ONCE(1)
clear_page()
The solution is to re-try __copy_from_user_inatomic() under PTL after
checking that PTE is matches the orig_pte.
The second copy attempt can still fail, like due to non-readable PTE, but
there's nothing reasonable we can do about, except clearing the CoW page.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Justin He <Justin.He@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: http://lkml.kernel.org/r/20200218154151.13349-1-kirill.shutemov@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dce8e23710 ]
KCSAN find inode->i_disksize could be accessed concurrently.
BUG: KCSAN: data-race in ext4_mark_iloc_dirty / ext4_write_end
write (marked) to 0xffff8b8932f40090 of 8 bytes by task 66792 on cpu 0:
ext4_write_end+0x53f/0x5b0
ext4_da_write_end+0x237/0x510
generic_perform_write+0x1c4/0x2a0
ext4_buffered_write_iter+0x13a/0x210
ext4_file_write_iter+0xe2/0x9b0
new_sync_write+0x29c/0x3a0
__vfs_write+0x92/0xa0
vfs_write+0xfc/0x2a0
ksys_write+0xe8/0x140
__x64_sys_write+0x4c/0x60
do_syscall_64+0x8a/0x2a0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
read to 0xffff8b8932f40090 of 8 bytes by task 14414 on cpu 1:
ext4_mark_iloc_dirty+0x716/0x1190
ext4_mark_inode_dirty+0xc9/0x360
ext4_convert_unwritten_extents+0x1bc/0x2a0
ext4_convert_unwritten_io_end_vec+0xc5/0x150
ext4_put_io_end+0x82/0x130
ext4_writepages+0xae7/0x16f0
do_writepages+0x64/0x120
__writeback_single_inode+0x7d/0x650
writeback_sb_inodes+0x3a4/0x860
__writeback_inodes_wb+0xc4/0x150
wb_writeback+0x43f/0x510
wb_workfn+0x3b2/0x8a0
process_one_work+0x39b/0x7e0
worker_thread+0x88/0x650
kthread+0x1d4/0x1f0
ret_from_fork+0x35/0x40
The plain read is outside of inode->i_data_sem critical section
which results in a data race. Fix it by adding READ_ONCE().
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Link: https://lore.kernel.org/r/1582556566-3909-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df8e34ac27 ]
[why]
When combining two or more pipes in DSC mode, there will always be more
than 1 slice per line. In this case, as per DSC rules, the sink device
is expecting that the ICH is reset at the end of each slice line (i.e.
ICH_RESET_AT_END_OF_LINE must be configured based on the number of
slices at the output of ODM). It is recommended that software set
ICH_RESET_AT_END_OF_LINE = 0xF for each DSC in the ODM combine. However
the current code only set ICH_RESET_AT_END_OF_LINE = 0xF when number of
slice per DSC engine is greater than 1 instead of number of slice per
output after ODM combine.
[how]
Add is_odm in dsc config. Set ICH_RESET_AT_END_OF_LINE = 0xF if either
is_odm or number of slice per DSC engine is greater than 1.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4b78169e3 ]
The last jump to free_exit in mm_iommu_do_alloc() happens after page
pointers in struct mm_iommu_table_group_mem_t were already converted to
physical addresses. Thus calling put_page() on these physical addresses
will likely crash.
This moves the loop which calculates the pageshift and converts page
struct pointers to physical addresses later after the point when
we cannot fail; thus eliminating the need to convert pointers back.
Fixes: eb9d7a62c3 ("powerpc/mm_iommu: Fix potential deadlock")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191223060351.26359-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08bb4da901 ]
Some controllers have been observed to send zero'd events under some
conditions. This change guards against this condition as well as adding
a trace to facilitate diagnosability of this condition.
Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6dd255bdd ]
Some released ACPI FW for Huawei boards describes incorrect the port IO
address range for child devices, in that it tells us the IO port max range
is 0x3fff for each child device, which is not correct. The address range
should be [e4:e8) or similar. With this incorrect upper range, the child
device IO port resources overlap.
As such, the kernel thinks that the LPC host serial device is a child of
the IPMI device:
root@(none)$ more /proc/ioports
[...]
00ffc0e3-00ffffff : hisi-lpc-ipmi.0.auto
00ffc0e3-00ffc0e3 : ipmi_si
00ffc0e4-00ffc0e4 : ipmi_si
00ffc0e5-00ffc0e5 : ipmi_si
00ffc2f7-00ffffff : serial8250.1.auto
00ffc2f7-00ffc2fe : serial
root@(none)$
They should both be siblings. Note that these are logical PIO addresses,
which have a direct mapping from the FW IO port ranges.
This shows up as a real issue when we enable CONFIG_KASAN and
CONFIG_DEBUG_TEST_DRIVER_REMOVE - we see use-after-free warnings in the
host removal path:
==================================================================
BUG: KASAN: use-after-free in release_resource+0x38/0xc8
Read of size 8 at addr ffff0026accdbc38 by task swapper/0/1
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00001-g68e186e77b5c-dirty #1593
Hardware name: Huawei Taishan 2180 /D03, BIOS Hisilicon D03 IT20 Nemo 2.0 RC0 03/30/2018
Call trace:
dump_backtrace+0x0/0x290
show_stack+0x14/0x20
dump_stack+0xf0/0x14c
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x12c/0x23c
kasan_report+0xc/0x18
__asan_load8+0x94/0xb8
release_resource+0x38/0xc8
platform_device_del.part.10+0x80/0xe0
platform_device_unregister+0x20/0x38
hisi_lpc_acpi_remove_subdev+0x10/0x20
device_for_each_child+0xc8/0x128
hisi_lpc_acpi_remove+0x4c/0xa8
hisi_lpc_remove+0xbc/0xc0
platform_drv_remove+0x3c/0x68
really_probe+0x174/0x548
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa4/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x234/0x2f0
driver_register+0xbc/0x1d0
__platform_driver_register+0x7c/0x88
hisi_lpc_driver_init+0x18/0x20
do_one_initcall+0xb4/0x258
kernel_init_freeable+0x248/0x2c0
kernel_init+0x10/0x118
ret_from_fork+0x10/0x1c
...
The issue here is that the kernel created an incorrect parent-child
resource dependency between two devices, and references the false parent
node when deleting the second child device, when it had been deleted
already.
Fix up the child device resources from FW to create proper IO port
resource relationships for broken FW.
With this, the IO port layout looks more healthy:
root@(none)$ more /proc/ioports
[...]
00ffc0e3-00ffc0e7 : hisi-lpc-ipmi.0.auto
00ffc0e3-00ffc0e3 : ipmi_si
00ffc0e4-00ffc0e4 : ipmi_si
00ffc0e5-00ffc0e5 : ipmi_si
00ffc2f7-00ffc2ff : serial8250.1.auto
00ffc2f7-00ffc2fe : serial
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00d996a43 ]
Fields in "struct timer_rand_state" could be accessed concurrently.
Lockless plain reads and writes result in data races. Fix them by adding
pairs of READ|WRITE_ONCE(). The data races were reported by KCSAN,
BUG: KCSAN: data-race in add_timer_randomness / add_timer_randomness
write to 0xffff9f320a0a01d0 of 8 bytes by interrupt on cpu 22:
add_timer_randomness+0x100/0x190
add_timer_randomness at drivers/char/random.c:1152
add_disk_randomness+0x85/0x280
scsi_end_request+0x43a/0x4a0
scsi_io_completion+0xb7/0x7e0
scsi_finish_command+0x1ed/0x2a0
scsi_softirq_done+0x1c9/0x1d0
blk_done_softirq+0x181/0x1d0
__do_softirq+0xd9/0x57c
irq_exit+0xa2/0xc0
do_IRQ+0x8b/0x190
ret_from_intr+0x0/0x42
cpuidle_enter_state+0x15e/0x980
cpuidle_enter+0x69/0xc0
call_cpuidle+0x23/0x40
do_idle+0x248/0x280
cpu_startup_entry+0x1d/0x1f
start_secondary+0x1b2/0x230
secondary_startup_64+0xb6/0xc0
no locks held by swapper/22/0.
irq event stamp: 32871382
_raw_spin_unlock_irqrestore+0x53/0x60
_raw_spin_lock_irqsave+0x21/0x60
_local_bh_enable+0x21/0x30
irq_exit+0xa2/0xc0
read to 0xffff9f320a0a01d0 of 8 bytes by interrupt on cpu 2:
add_timer_randomness+0xe8/0x190
add_disk_randomness+0x85/0x280
scsi_end_request+0x43a/0x4a0
scsi_io_completion+0xb7/0x7e0
scsi_finish_command+0x1ed/0x2a0
scsi_softirq_done+0x1c9/0x1d0
blk_done_softirq+0x181/0x1d0
__do_softirq+0xd9/0x57c
irq_exit+0xa2/0xc0
do_IRQ+0x8b/0x190
ret_from_intr+0x0/0x42
cpuidle_enter_state+0x15e/0x980
cpuidle_enter+0x69/0xc0
call_cpuidle+0x23/0x40
do_idle+0x248/0x280
cpu_startup_entry+0x1d/0x1f
start_secondary+0x1b2/0x230
secondary_startup_64+0xb6/0xc0
no locks held by swapper/2/0.
irq event stamp: 37846304
_raw_spin_unlock_irqrestore+0x53/0x60
_raw_spin_lock_irqsave+0x21/0x60
_local_bh_enable+0x21/0x30
irq_exit+0xa2/0xc0
Reported by Kernel Concurrency Sanitizer on:
Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018
Link: https://lore.kernel.org/r/1582648024-13111-1-git-send-email-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54f529a680 ]
SDEI has private events that need registering and enabling on each CPU.
CPUs can come and go while we are trying to do this. SDEI tries to avoid
these problems by setting the reregister flag before the register call,
so any CPUs that come online register the event too. Sticking plaster
like this doesn't work, as if the register call fails, a CPU that
subsequently comes online will register the event before reregister
is cleared.
Take cpus_read_lock() around the register and enable calls. We don't
want surprise CPUs to do the wrong thing if they race with these calls
failing.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb0858d8bc ]
Looks like the iavf code actually experienced a race condition, when a
developer took code before the check for chain 0 was put to helper.
So use tc_cls_can_offload_and_chain0() helper instead of direct check and
move the check to _cb() so this is similar to i40e code.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a37963c7a ]
If an element is freed via RCU then recursion into BPF instrumentation
functions is not a concern. The element is already detached from the map
and the RCU callback does not hold any locks on which a kprobe, perf event
or tracepoint attached BPF program could deadlock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.259118710@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16171bffc8 ]
Alex Shi reported the pkey macros above arch_set_user_pkey_access()
to be unused. They are unused, and even refer to a nonexistent
CONFIG option.
But, they might have served a good use, which was to ensure that
the code does not try to set values that would not fit in the
PKRU register. As it stands, a too-large 'pkey' value would
be likely to silently overflow the u32 new_pkru_bits.
Add a check to look for overflows. Also add a comment to remind
any future developer to closely examine the types used to store
pkey values if arch_max_pkey() ever changes.
This boots and passes the x86 pkey selftests.
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200122165346.AD4DA150@viggo.jf.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9dfd3fb08 ]
For the duration of mapping eVMCS, it derefences ->memslots without holding
->srcu or ->slots_lock when accessing hv assist page. This patch fixes it by
moving nested_sync_vmcs12_to_shadow to prepare_guest_switch, where the SRCU
is already taken.
It can be reproduced by running kvm's evmcs_test selftest.
=============================
warning: suspicious rcu usage
5.6.0-rc1+ #53 tainted: g w ioe
-----------------------------
./include/linux/kvm_host.h:623 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by evmcs_test/8507:
#0: ffff9ddd156d00d0 (&vcpu->mutex){+.+.}, at:
kvm_vcpu_ioctl+0x85/0x680 [kvm]
stack backtrace:
cpu: 6 pid: 8507 comm: evmcs_test tainted: g w ioe 5.6.0-rc1+ #53
hardware name: dell inc. optiplex 7040/0jctf8, bios 1.4.9 09/12/2016
call trace:
dump_stack+0x68/0x9b
kvm_read_guest_cached+0x11d/0x150 [kvm]
kvm_hv_get_assist_page+0x33/0x40 [kvm]
nested_enlightened_vmentry+0x2c/0x60 [kvm_intel]
nested_vmx_handle_enlightened_vmptrld.part.52+0x32/0x1c0 [kvm_intel]
nested_sync_vmcs12_to_shadow+0x439/0x680 [kvm_intel]
vmx_vcpu_run+0x67a/0xe60 [kvm_intel]
vcpu_enter_guest+0x35e/0x1bc0 [kvm]
kvm_arch_vcpu_ioctl_run+0x40b/0x670 [kvm]
kvm_vcpu_ioctl+0x370/0x680 [kvm]
ksys_ioctl+0x235/0x850
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x77/0x780
entry_syscall_64_after_hwframe+0x49/0xbe
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 147f1a1fe5 ]
The "u" field in the event has three states, -1/0/1. Using u8 however means that
comparison with -1 will always fail, so change to signed char.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb3063d319 ]
From the comment above the definition of the roundup_pow_of_two() macro:
The result is undefined when n == 0.
Hence only pass positive values to roundup_pow_of_two(). This patch fixes
the following UBSAN complaint:
UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
Call Trace:
dump_stack+0xa5/0xe6
ubsan_epilogue+0x9/0x26
__ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9
rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe]
rxe_modify_qp+0x59/0x70 [rdma_rxe]
_ib_modify_qp+0x5aa/0x7c0 [ib_core]
ib_modify_qp+0x3b/0x50 [ib_core]
cma_modify_qp_rtr+0x234/0x260 [rdma_cm]
__rdma_accept+0x1a7/0x650 [rdma_cm]
nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma]
cma_cm_event_handler+0x6b/0x330 [rdma_cm]
cma_ib_req_handler+0xe60/0x22d0 [rdma_cm]
cm_process_work+0x30/0x140 [ib_cm]
cm_req_handler+0x11f4/0x1cd0 [ib_cm]
cm_work_handler+0xb8/0x344e [ib_cm]
process_one_work+0x569/0xb60
worker_thread+0x7a/0x5d0
kthread+0x1e6/0x210
ret_from_fork+0x24/0x30
Link: https://lore.kernel.org/r/20200217205714.26937-1-bvanassche@acm.org
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bbc835376 ]
This test places a kprobe to function getname_flags() in the kernel
which has the following prototype:
struct filename *getname_flags(const char __user *filename, int flags, int *empty)
The 'filename' argument points to a filename located in user space memory.
Looking at commit 88903c4643 ("tracing/probe: Add ustring type for
user-space string") the kprobe should indicate that user space memory is
accessed.
Output before:
[root@m35lp76 perf]# ./perf test 66 67
66: Use vfs_getname probe to get syscall args filenames : FAILED!
67: Check open filename arg using perf trace + vfs_getname: FAILED!
[root@m35lp76 perf]#
Output after:
[root@m35lp76 perf]# ./perf test 66 67
66: Use vfs_getname probe to get syscall args filenames : Ok
67: Check open filename arg using perf trace + vfs_getname: Ok
[root@m35lp76 perf]#
Comments from Masami Hiramatsu:
This bug doesn't happen on x86 or other archs on which user address
space and kernel address space is the same. On some arches (ppc64 in
this case?) user address space is partially or completely the same as
kernel address space.
(Yes, they switch the world when running into the kernel) In this case,
we need to use different data access functions for each space.
That is why I introduced the "ustring" type for kprobe events.
As far as I can see, Thomas's patch is sane. Thomas, could you show us
your result on your test environment?
Comments from Thomas Richter:
Test results for s/390 included above.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200217102111.61137-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93eaec7625 ]
Fixes a theoretical issue where it could potentially overwrite an existing
descriptor entry (and leaking its skb)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9379df2fd9 ]
During the cleanup of the aggregation session, a rx handler (or release timer)
on another CPU might still hold a pointer to the reorder buffer and could
attempt to release some packets.
Clearing pointers during cleanup avoids a theoretical use-after-free bug here.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9195189e00 ]
The libkcapi test which causes kernel panic is
aead asynchronous vmsplice multiple test.
./bin/kcapi -v -d 4 -x 10 -c "ccm(aes)"
-q 4edb58e8d5eb6bc711c43a6f3693daebde2e5524f1b55297abb29f003236e43d
-t a7877c99 -n 674742abd0f5ba -k 2861fd0253705d7875c95ba8a53171b4
-a fb7bc304a3909e66e2e0c5ef952712dd884ce3e7324171369f2c5db1adc48c7d
This patch avoids dma_mapping of a zero length sg which causes the panic,
by using sg_nents_for_len which maps only upto a specific length
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3b9c187dc ]
There are currently three counters to track the IRQ context of a lock
chain - nr_hardirq_chains, nr_softirq_chains and nr_process_chains.
They are incremented when a new lock chain is added, but they are
not decremented when a lock chain is removed. That causes some of the
statistic counts reported by /proc/lockdep_stats to be incorrect.
IRQ
Fix that by decrementing the right counter when a lock chain is removed.
Since inc_chains() no longer accesses hardirq_context and softirq_context
directly, it is moved out from the CONFIG_TRACE_IRQFLAGS conditional
compilation block.
Fixes: a0b0fd53e1 ("locking/lockdep: Free lock classes that are no longer in use")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200206152408.24165-2-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cb9e1ddaa ]
Coverity reported a memory corruption error for the fdmi attributes
routines:
CID 15768 [Memory Corruption] Out-of-bounds access on FDMI
Sloppy coding of the fmdi structures. In both the lpfc_fdmi_attr_def and
lpfc_fdmi_reg_port_list structures, a field was placed at the start of
payload that may have variable content. The field was given an arbitrary
type (uint32_t). The code then uses the field name to derive an address,
which it used in things such as memset and memcpy. The memset sizes or
memcpy lengths were larger than the arbitrary type, thus coverity reported
an error.
Fix by replacing the arbitrary fields with the real field structures
describing the payload.
Link: https://lore.kernel.org/r/20200128002312.16346-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 821bc882ac ]
When performing reset testing, the eq's list for related hwqs was getting
corrupted. In cases where there is not a 1:1 eq to hwq, the eq is
shared. The eq maintains a list of hwqs utilizing it in case of cpu
offlining and polling. During the reset, the hwqs are being torn down so
they can be recreated. The recreation was getting confused by seeing a
non-null eq assignment on the eq and the eq list became corrupt.
Correct by clearing the hdwq eq assignment when the hwq is cleaned up.
Link: https://lore.kernel.org/r/20200128002312.16346-6-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39c4f1a965 ]
The driver is occasionally seeing the following SLI Port error, requiring
reset and reinit:
Port Status Event: ... error 1=0x52004a01, error 2=0x218
The failure means an RQ timeout. That is, the adapter had received
asynchronous receive frames, ran out of buffer slots to place the frames,
and the driver did not replenish the buffer slots before a timeout
occurred. The driver should not be so slow in replenishing buffers that a
timeout can occur.
When the driver received all the frames of a sequence, it allocates an IOCB
to put the frames in. In a situation where there was no IOCB available for
the frame of a sequence, the RQ buffer corresponding to the first frame of
the sequence was not returned to the FW. Eventually, with enough traffic
encountering the situation, the timeout occurred.
Fix by releasing the buffer back to firmware whenever there is no IOCB for
the first frame.
[mkp: typo]
Link: https://lore.kernel.org/r/20200128002312.16346-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d269a8e2a ]
If seq_file .next function does not change position index,
read after some lseek can generate unexpected output.
$ dd if=/sys/fs/selinux/avc/cache_stats # usual output
lookups hits misses allocations reclaims frees
817223 810034 7189 7189 6992 7037
1934894 1926896 7998 7998 7632 7683
1322812 1317176 5636 5636 5456 5507
1560571 1551548 9023 9023 9056 9115
0+1 records in
0+1 records out
189 bytes copied, 5,1564e-05 s, 3,7 MB/s
$# read after lseek to midle of last line
$ dd if=/sys/fs/selinux/avc/cache_stats bs=180 skip=1
dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset
056 9115 <<<< end of last line
1560571 1551548 9023 9023 9056 9115 <<< whole last line once again
0+1 records in
0+1 records out
45 bytes copied, 8,7221e-05 s, 516 kB/s
$# read after lseek beyond end of of file
$ dd if=/sys/fs/selinux/avc/cache_stats bs=1000 skip=1
dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset
1560571 1551548 9023 9023 9056 9115 <<<< generates whole last line
0+1 records in
0+1 records out
36 bytes copied, 9,0934e-05 s, 396 kB/s
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70b3eeed49 ]
Common Criteria calls out for any action that modifies the audit trail to
be recorded. That usually is interpreted to mean insertion or removal of
rules. It is not required to log modification of the inode information
since the watch is still in effect. Additionally, if the rule is a never
rule and the underlying file is one they do not want events for, they
get an event for this bookkeeping update against their wishes.
Since no device/inode info is logged at insertion and no device/inode
information is logged on update, there is nothing meaningful being
communicated to the admin by the CONFIG_CHANGE updated_rules event. One
can assume that the rule was not "modified" because it is still watching
the intended target. If the device or inode cannot be resolved, then
audit_panic is called which is sufficient.
The correct resolution is to drop logging config_update events since
the watch is still in effect but just on another unknown inode.
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85e148fb96 ]
[Why]
these registers should have been double buffered. SW workaround we will have SW program the more aggressive (lower) values
whenever we are upating this register, so we will not have underflow at expense of less optimzal request pattern.
[How]
there is a driver bug where we don't check for 0, which is uninitialzed HW default. since 0 is smaller than any value we need to program,
driver end up with not programming these registers
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9ceb060b3 ]
perf does not know how to deal with a __builtin_bswap32() call, and
complains. All other functions just store the xid etc in host endian
form, so let's do that in the tracepoint for nfsd_file_acquire too.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86b18aaa2b ]
sk_buff.qlen can be accessed concurrently as noticed by KCSAN,
BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg
read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96:
unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821
net/unix/af_unix.c:1761
____sys_sendmsg+0x33e/0x370
___sys_sendmsg+0xa6/0xf0
__sys_sendmsg+0x69/0xf0
__x64_sys_sendmsg+0x51/0x70
do_syscall_64+0x91/0xb47
entry_SYSCALL_64_after_hwframe+0x49/0xbe
write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99:
__skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029
__skb_try_recv_datagram+0xbe/0x220
unix_dgram_recvmsg+0xee/0x850
____sys_recvmsg+0x1fb/0x210
___sys_recvmsg+0xa2/0xf0
__sys_recvmsg+0x66/0xf0
__x64_sys_recvmsg+0x51/0x70
do_syscall_64+0x91/0xb47
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Since only the read is operating as lockless, it could introduce a logic
bug in unix_recvq_full() due to the load tearing. Fix it by adding
a lockless variant of skb_queue_len() and unix_recvq_full() where
READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to
the commit d7d16a8935 ("net: add skb_queue_empty_lockless()").
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d011d5057 ]
RIRB interrupt status getting cleared after the write pointer is read
causes a race condition, where last response(s) into RIRB may remain
unserviced by IRQ, eventually causing azx_rirb_get_response to fall
back to polling mode. Clearing the RIRB interrupt status ahead of
write pointer access ensures that this condition is avoided.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Viswanath L <viswanathl@nvidia.com>
Link: https://lore.kernel.org/r/1580983853-351-1-git-send-email-viswanathl@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10c8d69f31 ]
If seq_file .next fuction does not change position index, read after
some lseek can generate unexpected output.
In Aug 2018 NeilBrown noticed commit 1f4aace60b ("fs/seq_file.c:
simplify seq_file iteration code and interface") "Some ->next functions
do not increment *pos when they return NULL... Note that such ->next
functions are buggy and should be fixed. A simple demonstration is
dd if=/proc/swaps bs=1000 skip=1
Choose any block size larger than the size of /proc/swaps. This will
always show the whole last line of /proc/swaps"
Described problem is still actual. If you make lseek into middle of
last output line following read will output end of last line and whole
last line once again.
$ dd if=/proc/swaps bs=1 # usual output
Filename Type Size Used Priority
/dev/dm-0 partition 4194812 97536 -2
104+0 records in
104+0 records out
104 bytes copied
$ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice
dd: /proc/swaps: cannot skip to specified offset
v/dm-0 partition 4194812 97536 -2
/dev/dm-0 partition 4194812 97536 -2
3+1 records in
3+1 records out
131 bytes copied
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Link: http://lkml.kernel.org/r/bd8cfd7b-ac95-9b91-f9e7-e8438bd5047d@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jann Horn <jannh@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c08fc896b ]
There is no lock preventing both l2cap_sock_release() and
chan->ops->close() from running at the same time.
If we consider Thread A running l2cap_chan_timeout() and Thread B running
l2cap_sock_release(), expected behavior is:
A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb()
A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill()
B::l2cap_sock_release()->sock_orphan()
B::l2cap_sock_release()->l2cap_sock_kill()
where,
sock_orphan() clears "sk->sk_socket" and l2cap_sock_teardown_cb() marks
socket as SOCK_ZAPPED.
In l2cap_sock_kill(), there is an "if-statement" that checks if both
sock_orphan() and sock_teardown() has been run i.e. sk->sk_socket is NULL
and socket is marked as SOCK_ZAPPED. Socket is killed if the condition is
satisfied.
In the race condition, following occurs:
A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb()
B::l2cap_sock_release()->sock_orphan()
B::l2cap_sock_release()->l2cap_sock_kill()
A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill()
In this scenario, "if-statement" is true in both B::l2cap_sock_kill() and
A::l2cap_sock_kill() and we hit "refcount: underflow; use-after-free" bug.
Similar condition occurs at other places where teardown/sock_kill is
happening:
l2cap_disconnect_rsp()->l2cap_chan_del()->l2cap_sock_teardown_cb()
l2cap_disconnect_rsp()->l2cap_sock_close_cb()->l2cap_sock_kill()
l2cap_conn_del()->l2cap_chan_del()->l2cap_sock_teardown_cb()
l2cap_conn_del()->l2cap_sock_close_cb()->l2cap_sock_kill()
l2cap_disconnect_req()->l2cap_chan_del()->l2cap_sock_teardown_cb()
l2cap_disconnect_req()->l2cap_sock_close_cb()->l2cap_sock_kill()
l2cap_sock_cleanup_listen()->l2cap_chan_close()->l2cap_sock_teardown_cb()
l2cap_sock_cleanup_listen()->l2cap_sock_kill()
Protect teardown/sock_kill and orphan/sock_kill by adding hold_lock on
l2cap channel to ensure that the socket is killed only after marked as
zapped and orphan.
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e749e09db3 ]
Some syntax needs to be more rigorous for python 3.
Backwards compatibility tested with python 2.7
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af4ddd607d ]
test.d/ftrace/func-filter-glob.tc is failing on s390 because it has
ARCH_INLINE_SPIN_LOCK and friends set to 'y'. So the usual
__raw_spin_lock symbol isn't in the ftrace function list. Change
'*aw*lock' to '*spin*lock' which would hopefully match some of the
locking functions on all platforms.
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a6bed4fe0 ]
If the caller passes in a NULL cap_reservation, and we can't allocate
one then ensure that we fail gracefully.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b362498a7 ]
Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC
"EZ Connect g").
This device uses ar5523 chipset and requires firmware to be loaded. Even
though pid of the device is 4507, this patch adds it as 4506 so that
AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid
4507.
Signed-off-by: Mert Dirik <mertdirik@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40ff1ddb55 ]
The stacktrace code can read beyond the stack size, when it attempts to
read pt_regs from exception frames.
This can happen on normal, non-corrupt stacks. Since the unwind
information in the extable is not correct for function prologues, the
unwinding code can return data from the stack which is not actually the
caller function address, and if in_entry_text() happens to succeed on
this value, we can end up reading data from outside the task's stack
when attempting to read pt_regs, since there is no bounds check.
Example:
[<8010e729>] (unwind_backtrace) from [<8010a9c9>] (show_stack+0x11/0x14)
[<8010a9c9>] (show_stack) from [<8057d8d7>] (dump_stack+0x87/0xac)
[<8057d8d7>] (dump_stack) from [<8012271d>] (tasklet_action_common.constprop.4+0xa5/0xa8)
[<8012271d>] (tasklet_action_common.constprop.4) from [<80102333>] (__do_softirq+0x11b/0x31c)
[<80102333>] (__do_softirq) from [<80122485>] (irq_exit+0xad/0xd8)
[<80122485>] (irq_exit) from [<8015f3d7>] (__handle_domain_irq+0x47/0x84)
[<8015f3d7>] (__handle_domain_irq) from [<8036a523>] (gic_handle_irq+0x43/0x78)
[<8036a523>] (gic_handle_irq) from [<80101a49>] (__irq_svc+0x69/0xb4)
Exception stack(0xeb491f58 to 0xeb491fa0)
1f40: 7eb14794 00000000
1f60: ffffffff 008dd32c 008dd324 ffffffff 008dd314 0000002a 801011e4 eb490000
1f80: 0000002a 7eb1478c 50c5387d eb491fa8 80101001 8023d09c 40080033 ffffffff
[<80101a49>] (__irq_svc) from [<8023d09c>] (do_pipe2+0x0/0xac)
[<8023d09c>] (do_pipe2) from [<ffffffff>] (0xffffffff)
Exception stack(0xeb491fc8 to 0xeb492010)
1fc0: 008dd314 0000002a 00511ad8 008de4c8 7eb14790 7eb1478c
1fe0: 00511e34 7eb14774 004c8557 76f44098 60080030 7eb14794 00000000 00000000
2000: 00000001 00000000 ea846c00 ea847cc0
In this example, the stack limit is 0xeb492000, but 16 bytes outside the
stack have been read.
Fix it by adding bounds checks.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbc3b92ce0 ]
I noticed when trying to use the trace-cmd python interface that reading the raw
buffer wasn't working for kernel_stack events. This is because it uses a
stubbed version of __dynamic_array that doesn't do the __data_loc trick and
encode the length of the array into the field. Instead it just shows up as a
size of 0. So change this to __array and set the len to FTRACE_STACK_ENTRIES
since this is what we actually do in practice and matches how user_stack_trace
works.
Link: http://lkml.kernel.org/r/1411589652-1318-1-git-send-email-jbacik@fb.com
Signed-off-by: Josef Bacik <jbacik@fb.com>
[ Pulled from the archeological digging of my INBOX ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 268d3636df ]
Currently, kmemdup is applied to the firmware data, and it invokes
kmalloc under the hood. The firmware size and patch_length are big (more
than PAGE_SIZE), and on some low-end systems (like ASUS E202SA) kmalloc
may fail to allocate a contiguous chunk under high memory usage and
fragmentation:
Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821a_fw.bin
kworker/u9:2: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
<stack trace follows>
As firmware load happens on each resume, Bluetooth will stop working
after several iterations, when the kernel fails to allocate an order-4
page.
This patch replaces kmemdup with kvmalloc+memcpy. It's not required to
have a contiguous chunk here, because it's not mapped to the device
directly.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e0942c030 ]
Many drivers don't check for errors when they get a 0xFFs response from an
MMIO load. As a result after an EEH event occurs a driver can get stuck in
a polling loop unless it some kind of internal timeout logic.
Currently EEH tries to detect and report stuck drivers by dumping a stack
trace after eeh_dev_check_failure() is called EEH_MAX_FAILS times on an
already frozen PE. The value of EEH_MAX_FAILS was chosen so that a dump
would occur every few seconds if the driver was spinning in a loop. This
results in a lot of spurious stack traces in the kernel log.
Fix this by limiting it to printing one stack trace for each PE freeze. If
the driver is truely stuck the kernel's hung task detector is better suited
to reporting the probelm anyway.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Tested-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191016012536.22588-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90d2f1da83 ]
If nfsd_file_mark_find_or_create() keeps winning the race for the
nfsd_file_fsnotify_group->mark_mutex against nfsd_file_mark_put()
then it can soft lock up, since fsnotify_add_inode_mark() ends
up always finding an existing entry.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32dab6828c ]
Use kzalloc() to allocate auxiliary buffer structure initialized
with all zeroes to avoid random value in trace output.
Avoid double access to SBD hardware flags.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6d2a5c263 ]
Inspired by btrfs-progs github issue #208, where chunk item in chunk
tree has invalid num_stripes (0).
Although that can already be caught by current btrfs_check_chunk_valid(),
that function doesn't really check item size as it needs to handle chunk
item in super block sys_chunk_array().
This patch will add two extra checks for chunk items in chunk tree:
- Basic chunk item size
If the item is smaller than btrfs_chunk (which already contains one
stripe), exit right now as reading num_stripes may even go beyond
eb boundary.
- Item size check against num_stripes
If item size doesn't match with calculated chunk size, then either the
item size or the num_stripes is corrupted. Error out anyway.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5d5605ca3 ]
Potentially it is possible that interrupt may fire after transfer timeout.
That may not end up well for the next transfer because interrupt handling
may race with hardware resetting.
This is very unlikely to happen in practice, but anyway let's prevent the
potential problem by enabling interrupt only at the moments when it is
actually necessary to get some interrupt event.
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6adc57cff ]
For DSC MST, sometimes monitors would break out
in full-screen static. The issue traced back to the
PPS generation code, where these variables were being used
uninitialized and were picking up garbage.
memset to 0 to avoid this
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3df663a147 ]
There is a race condition in acpi_ec_get_query_handler()
theoretically allowing query handlers to go away before refernce
counting them.
In order to avoid it, call kref_get() on query handlers under
ec->mutex.
Also simplify the code a bit while at it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f643ee295c ]
The original patch bringed in the "SCTP ACK tracking trace event"
feature was committed at Dec.20, 2017, it replaced jprobe usage
with trace events, and bringed in two trace events, one is
TRACE_EVENT(sctp_probe), another one is TRACE_EVENT(sctp_probe_path).
The original patch intended to trigger the trace_sctp_probe_path in
TRACE_EVENT(sctp_probe) as below code,
+TRACE_EVENT(sctp_probe,
+
+ TP_PROTO(const struct sctp_endpoint *ep,
+ const struct sctp_association *asoc,
+ struct sctp_chunk *chunk),
+
+ TP_ARGS(ep, asoc, chunk),
+
+ TP_STRUCT__entry(
+ __field(__u64, asoc)
+ __field(__u32, mark)
+ __field(__u16, bind_port)
+ __field(__u16, peer_port)
+ __field(__u32, pathmtu)
+ __field(__u32, rwnd)
+ __field(__u16, unack_data)
+ ),
+
+ TP_fast_assign(
+ struct sk_buff *skb = chunk->skb;
+
+ __entry->asoc = (unsigned long)asoc;
+ __entry->mark = skb->mark;
+ __entry->bind_port = ep->base.bind_addr.port;
+ __entry->peer_port = asoc->peer.port;
+ __entry->pathmtu = asoc->pathmtu;
+ __entry->rwnd = asoc->peer.rwnd;
+ __entry->unack_data = asoc->unack_data;
+
+ if (trace_sctp_probe_path_enabled()) {
+ struct sctp_transport *sp;
+
+ list_for_each_entry(sp, &asoc->peer.transport_addr_list,
+ transports) {
+ trace_sctp_probe_path(sp, asoc);
+ }
+ }
+ ),
But I found it did not work when I did testing, and trace_sctp_probe_path
had no output, I finally found that there is trace buffer lock
operation(trace_event_buffer_reserve) in include/trace/trace_events.h:
static notrace void \
trace_event_raw_event_##call(void *__data, proto) \
{ \
struct trace_event_file *trace_file = __data; \
struct trace_event_data_offsets_##call __maybe_unused __data_offsets;\
struct trace_event_buffer fbuffer; \
struct trace_event_raw_##call *entry; \
int __data_size; \
\
if (trace_trigger_soft_disabled(trace_file)) \
return; \
\
__data_size = trace_event_get_offsets_##call(&__data_offsets, args); \
\
entry = trace_event_buffer_reserve(&fbuffer, trace_file, \
sizeof(*entry) + __data_size); \
\
if (!entry) \
return; \
\
tstruct \
\
{ assign; } \
\
trace_event_buffer_commit(&fbuffer); \
}
The reason caused no output of trace_sctp_probe_path is that
trace_sctp_probe_path written in TP_fast_assign part of
TRACE_EVENT(sctp_probe), and it will be placed( { assign; } ) after the
trace_event_buffer_reserve() when compiler expands Macro,
entry = trace_event_buffer_reserve(&fbuffer, trace_file, \
sizeof(*entry) + __data_size); \
\
if (!entry) \
return; \
\
tstruct \
\
{ assign; } \
so trace_sctp_probe_path finally can not acquire trace_event_buffer
and return no output, that is to say the nest of tracepoint entry function
is not allowed. The function call flow is:
trace_sctp_probe()
-> trace_event_raw_event_sctp_probe()
-> lock buffer
-> trace_sctp_probe_path()
-> trace_event_raw_event_sctp_probe_path() --nested
-> buffer has been locked and return no output.
This patch is to remove trace_sctp_probe_path from the TP_fast_assign
part of TRACE_EVENT(sctp_probe) to avoid the nest of entry function,
and trigger sctp_probe_path_trace in sctp_outq_sack.
After this patch, you can enable both events individually,
# cd /sys/kernel/debug/tracing
# echo 1 > events/sctp/sctp_probe/enable
# echo 1 > events/sctp/sctp_probe_path/enable
Or, you can enable all the events under sctp.
# echo 1 > events/sctp/enable
Signed-off-by: Kevin Kou <qdkevin.kou@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be0709e449 ]
NVMe device re-discovery does not complete. Dev_loss_tmo messages seen on
initiator after recovery from a link disturbance.
The failing case is the following:
When the driver (as a NVME target) receives a PLOGI, the driver initiates
an "unreg rpi" mailbox command. While the mailbox command is in progress,
the driver requests that an ACC be sent to the initiator. The target's ACC
is received by the initiator and the initiator then transmits a PLOGI. The
driver receives the PLOGI prior to receiving the completion for the PLOGI
response WQE that sent the ACC. (Different delivery sources from the hw so
the race is very possible). Given the PLOGI is prior to the ACC completion
(signifying PLOGI exchange complete), the driver LS_RJT's the PRLI. The
"unreg rpi" mailbox then completes. Since PRLI has been received, the
driver transmits a PLOGI to restart discovery, which the initiator then
ACC's. If the driver processes the (re)PLOGI ACC prior to the completing
the handling for the earlier ACC it sent the intiators original PLOGI,
there is no state change for completion of the (re)PLOGI. The ndlp remains
in "PLOGI Sent" and the initiator continues sending PRLI's which are
rejected by the target until timeout or retry is reached.
Fix by: When in target mode, defer sending an ACC for the received PLOGI
until unreg RPI completes.
Link: https://lore.kernel.org/r/20191218235808.31922-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03758d6026 ]
A kref or refcount isn't the right tool to be used here for counting
number of devices that are sharing the static OPPs created for the OPP
table. For example, we are reinitializing the kref again, after it
reaches a value of 0 and frees the resources, if the static OPPs get
added for the same OPP table structure (as the OPP table structure was
never freed). That is messy and very unclear.
This patch makes parsed_static_opps an unsigned integer and uses it to
count the number of users of the static OPPs. The increment and
decrement to parsed_static_opps is done under opp_table->lock now to
make sure no races are possible if the OPP table is getting added and
removed in parallel (which doesn't happen in practice, but can in
theory).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e72eab2e7 ]
When setting DMA for video capture from CSI channel, if the DMA size
is not given, it ends up writing as much data as sent by the camera.
This may lead to overwriting the buffers causing memory corruption.
Observed green lines on the default framebuffer.
Restrict the DMA to maximum height as specified in the S_FMT ioctl.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 135517d356 ]
Problem:
Due to a race between drm_sched_cleanup_jobs in sched thread and
drm_sched_job_timedout in timeout work there is a possiblity that
bad job was already freed while still being accessed from the
timeout thread.
Fix:
Instead of just peeking at the bad job in the mirror list
remove it from the list under lock and then put it back later when
we are garanteed no race with main sched thread is possible which
is after the thread is parked.
v2: Lock around processing ring_mirror_list in drm_sched_cleanup_jobs.
v3: Rebase on top of drm-misc-next. v2 is not needed anymore as
drm_sched_get_cleanup_job already has a lock there.
v4: Fix comments to relfect latest code in drm-misc.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Tested-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/342356
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf07132f96 ]
This patch proposes to require marked atomic accesses surrounding
raw_write_seqcount_barrier. We reason that otherwise there is no way to
guarantee propagation nor atomicity of writes before/after the barrier
[1]. For example, consider the compiler tears stores either before or
after the barrier; in this case, readers may observe a partial value,
and because readers are unaware that writes are going on (writes are not
in a seq-writer critical section), will complete the seq-reader critical
section while having observed some partial state.
[1] https://lwn.net/Articles/793253/
This came up when designing and implementing KCSAN, because KCSAN would
flag these accesses as data-races. After careful analysis, our reasoning
as above led us to conclude that the best thing to do is to propose an
amendment to the raw_seqcount_barrier usage.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97de863673 ]
Disabling the display using MCDE currently results in a warning
together with a delay caused by some timeouts:
mcde a0350000.mcde: MCDE display is disabled
------------[ cut here ]------------
WARNING: CPU: 0 PID: 20 at drivers/gpu/drm/drm_atomic_helper.c:2258 drm_atomic_helper_commit_hw_done+0xe0/0xe4
Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
Workqueue: events drm_mode_rmfb_work_fn
[<c010f468>] (unwind_backtrace) from [<c010b54c>] (show_stack+0x10/0x14)
[<c010b54c>] (show_stack) from [<c079dd90>] (dump_stack+0x84/0x98)
[<c079dd90>] (dump_stack) from [<c011d1b0>] (__warn+0xb8/0xd4)
[<c011d1b0>] (__warn) from [<c011d230>] (warn_slowpath_fmt+0x64/0xc4)
[<c011d230>] (warn_slowpath_fmt) from [<c0413048>] (drm_atomic_helper_commit_hw_done+0xe0/0xe4)
[<c0413048>] (drm_atomic_helper_commit_hw_done) from [<c04159cc>] (drm_atomic_helper_commit_tail_rpm+0x44/0x6c)
[<c04159cc>] (drm_atomic_helper_commit_tail_rpm) from [<c0415f5c>] (commit_tail+0x50/0x10c)
[<c0415f5c>] (commit_tail) from [<c04160dc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c04160dc>] (drm_atomic_helper_commit) from [<c0430790>] (drm_framebuffer_remove+0x390/0x428)
[<c0430790>] (drm_framebuffer_remove) from [<c0430860>] (drm_mode_rmfb_work_fn+0x38/0x48)
[<c0430860>] (drm_mode_rmfb_work_fn) from [<c01368a8>] (process_one_work+0x1f0/0x43c)
[<c01368a8>] (process_one_work) from [<c0136d48>] (worker_thread+0x254/0x55c)
[<c0136d48>] (worker_thread) from [<c013c014>] (kthread+0x124/0x150)
[<c013c014>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xeb14dfb0 to 0xeb14dff8)
dfa0: 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace 314909bcd4c7d50c ]---
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out
The reason for this is that there is a vblank event pending, but we
never handle it after disabling the vblank interrupts.
Check if there is an vblank event pending when disabling the display,
and clear it by sending a fake vblank event in that case.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-8-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49afb806cb ]
When a socket is suddenly shutdown or released, it will reject all the
unreceived messages in its receive queue. This applies to a connected
socket too, whereas there is only one 'FIN' message required to be sent
back to its peer in this case.
In case there are many messages in the queue and/or some connections
with such messages are shutdown at the same time, the link layer will
easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level
because of the message rejections. As a result, the link will be taken
down. Moreover, immediately when the link is re-established, the socket
layer can continue to reject the messages and the same issue happens...
The commit refactors the '__tipc_shutdown()' function to only send one
'FIN' in the situation mentioned above. For the connectionless case, it
is unavoidable but usually there is no rejections for such socket
messages because they are 'dest-droppable' by default.
In addition, the new code makes the other socket states clear
(e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1de6fc752 ]
Omar Sandoval reported that a 4G fallocate on the realtime device causes
filesystem shutdowns due to a log reservation overflow that happens when
we log the rtbitmap updates. Factor rtbitmap/rtsummary updates into the
the tr_write and tr_itruncate log reservation calculation.
"The following reproducer results in a transaction log overrun warning
for me:
mkfs.xfs -f -r rtdev=/dev/vdc -d rtinherit=1 -m reflink=0 /dev/vdb
mount -o rtdev=/dev/vdc /dev/vdb /mnt
fallocate -l 4G /mnt/foo
Reported-by: Omar Sandoval <osandov@osandov.com>
Tested-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af74262337 ]
When pulling in Divya Indi's patch, I made a minor fix to remove unneeded
braces. I commited my fix up via "git commit -a --amend". Unfortunately, I
didn't realize I had some changes I was testing in the module code, and
those changes were applied to Divya's patch as well.
This reverts the accidental updates to the module code.
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Divya Indi <divya.indi@oracle.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Fixes: e585e6469d ("tracing: Verify if trace array exists before destroying it.")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bda9498dd ]
In kvm_vgic_dist_init() called from kvm_vgic_map_resources(), if
dist->vgic_model is invalid, dist->spis will be freed without set
dist->spis = NULL. And in vgicv2 resources clean up path,
__kvm_vgic_destroy() will be called to free allocated resources.
And dist->spis will be freed again in clean up chain because we
forget to set dist->spis = NULL in kvm_vgic_dist_init() failed
path. So double free would happen.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1574923128-19956-1-git-send-email-linmiaohe@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a50cb80f2 ]
Registering the same notifier to a hook repeatedly can cause the hook
list to form a ring or lose other members of the list.
case1: An infinite loop in notifier_chain_register() can cause soft lockup
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test2);
case2: An infinite loop in notifier_chain_register() can cause soft lockup
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_call_chain(&test_notifier_list, 0, NULL);
case3: lose other hook test2
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test2);
atomic_notifier_chain_register(&test_notifier_list, &test1);
case4: Unregister returns 0, but the hook is still in the linked list,
and it is not really registered. If you call
notifier_call_chain after ko is unloaded, it will trigger oops.
If the system is configured with softlockup_panic and the same hook is
repeatedly registered on the panic_notifier_list, it will cause a loop
panic.
Add a check in notifier_chain_register(), intercepting duplicate
registrations to avoid infinite loops
Link: http://lkml.kernel.org/r/1568861888-34045-2-git-send-email-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef8c84effc ]
It looks like BPF program that handles BPF_SOCK_OPS_STATE_CB state
can race with the bpf_map_lookup_elem("global_map"); I sometimes
see the failures in this test and re-running helps.
Since we know that we expect the callback to be called 3 times (one
time for listener socket, two times for both ends of the connection),
let's export this number and add simple retry logic around that.
Also, let's make EXPECT_EQ() not return on failure, but continue
evaluating all conditions; that should make potential debugging
easier.
With this fix in place I don't observe the flakiness anymore.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Lawrence Brakmo <brakmo@fb.com>
Link: https://lore.kernel.org/bpf/20191204190955.170934-1-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca2ef4ffab ]
A kernel built with KASAN && FTRACE_WITH_REGS && !MODULES, produces a
boot-time splat in the bowels of ftrace:
| [ 0.000000] ftrace: allocating 32281 entries in 127 pages
| [ 0.000000] ------------[ cut here ]------------
| [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2019 ftrace_bug+0x27c/0x328
| [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-rc3-00008-g7f08ae53a7e3 #13
| [ 0.000000] Hardware name: linux,dummy-virt (DT)
| [ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO)
| [ 0.000000] pc : ftrace_bug+0x27c/0x328
| [ 0.000000] lr : ftrace_init+0x640/0x6cc
| [ 0.000000] sp : ffffa000120e7e00
| [ 0.000000] x29: ffffa000120e7e00 x28: ffff00006ac01b10
| [ 0.000000] x27: ffff00006ac898c0 x26: dfffa00000000000
| [ 0.000000] x25: ffffa000120ef290 x24: ffffa0001216df40
| [ 0.000000] x23: 000000000000018d x22: ffffa0001244c700
| [ 0.000000] x21: ffffa00011bf393c x20: ffff00006ac898c0
| [ 0.000000] x19: 00000000ffffffff x18: 0000000000001584
| [ 0.000000] x17: 0000000000001540 x16: 0000000000000007
| [ 0.000000] x15: 0000000000000000 x14: ffffa00010432770
| [ 0.000000] x13: ffff940002483519 x12: 1ffff40002483518
| [ 0.000000] x11: 1ffff40002483518 x10: ffff940002483518
| [ 0.000000] x9 : dfffa00000000000 x8 : 0000000000000001
| [ 0.000000] x7 : ffff940002483519 x6 : ffffa0001241a8c0
| [ 0.000000] x5 : ffff940002483519 x4 : ffff940002483519
| [ 0.000000] x3 : ffffa00011780870 x2 : 0000000000000001
| [ 0.000000] x1 : 1fffe0000d591318 x0 : 0000000000000000
| [ 0.000000] Call trace:
| [ 0.000000] ftrace_bug+0x27c/0x328
| [ 0.000000] ftrace_init+0x640/0x6cc
| [ 0.000000] start_kernel+0x27c/0x654
| [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x30/0x60 with crng_init=0
| [ 0.000000] ---[ end trace 0000000000000000 ]---
| [ 0.000000] ftrace faulted on writing
| [ 0.000000] [<ffffa00011bf393c>] _GLOBAL__sub_D_65535_0___tracepoint_initcall_level+0x4/0x28
| [ 0.000000] Initializing ftrace call sites
| [ 0.000000] ftrace record flags: 0
| [ 0.000000] (0)
| [ 0.000000] expected tramp: ffffa000100b3344
This is due to an unfortunate combination of several factors.
Building with KASAN results in the compiler generating anonymous
functions to register/unregister global variables against the shadow
memory. These functions are placed in .text.startup/.text.exit, and
given mangled names like _GLOBAL__sub_{I,D}_65535_0_$OTHER_SYMBOL. The
kernel linker script places these in .init.text and .exit.text
respectively, which are both discarded at runtime as part of initmem.
Building with FTRACE_WITH_REGS uses -fpatchable-function-entry=2, which
also instruments KASAN's anonymous functions. When these are discarded
with the rest of initmem, ftrace removes dangling references to these
call sites.
Building without MODULES implicitly disables STRICT_MODULE_RWX, and
causes arm64's patch_map() function to treat any !core_kernel_text()
symbol as something that can be modified in-place. As core_kernel_text()
is only true for .text and .init.text, with the latter depending on
system_state < SYSTEM_RUNNING, we'll treat .exit.text as something that
can be patched in-place. However, .exit.text is mapped read-only.
Hence in this configuration the ftrace init code blows up while trying
to patch one of the functions generated by KASAN.
We could try to filter out the call sites in .exit.text rather than
initializing them, but this would be inconsistent with how we handle
.init.text, and requires hooking into core bits of ftrace. The behaviour
of patch_map() is also inconsistent today, so instead let's clean that
up and have it consistently handle .exit.text.
This patch teaches patch_map() to handle .exit.text at init time,
preventing the boot-time splat above. The flow of patch_map() is
reworked to make the logic clearer and minimize redundant
conditionality.
Fixes: 3b23e4991f ("arm64: implement ftrace with regs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Torsten Duwe <duwe@suse.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82a829dc8c ]
issue:
kernel would report a warning from a double unpin
during the driver unloading on the CSB bo
why:
we unpin it during hw_fini, and there will be another
unpin in sw_fini on CSB bo.
fix:
actually we don't need to pin/unpin it during
hw_init/fini since it is created with kernel pinned,
we only need to fullfill the CSB again during hw_init
to prevent CSB/VRAM lost after S3
v2:
get_csb in init_rlc so hw_init() will make CSIB content
back even after reset or s3
v3:
use bo_create_kernel instead of bo_create_reserved for CSB
otherwise the bo_free_kernel() on CSB is not aligned and
would lead to its internal reserve pending there forever
take care of gfx7/8 as well
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c4da70c83 ]
Realtime files in XFS allocate extents in rextsize units. However, the
written/unwritten state of those extents is still tracked in blocksize
units. Therefore, a realtime file can be split up into written and
unwritten extents that are not necessarily aligned to the realtime
extent size. __xfs_bunmapi() has some logic to handle these various
corner cases. Consider how it handles the following case:
1. The last extent is unwritten.
2. The last extent is smaller than the realtime extent size.
3. startblock of the last extent is not aligned to the realtime extent
size, but startblock + blockcount is.
In this case, __xfs_bunmapi() calls xfs_bmap_add_extent_unwritten_real()
to set the second-to-last extent to unwritten. This should merge the
last and second-to-last extents, so __xfs_bunmapi() moves on to the
second-to-last extent.
However, if the size of the last and second-to-last extents combined is
greater than MAXEXTLEN, xfs_bmap_add_extent_unwritten_real() does not
merge the two extents. When that happens, __xfs_bunmapi() skips past the
last extent without unmapping it, thus leaking the space.
Fix it by only unwriting the minimum amount needed to align the last
extent to the realtime extent size, which is guaranteed to merge with
the last extent.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bcaad1f9f ]
CALL_ON_STACK is intended to be used for temporary stack switching with
potential return to the caller.
When CALL_ON_STACK is misused to switch from nodat stack to task stack
back_chain information would later lead stack unwinder from task stack into
(per cpu) nodat stack which is reused for other purposes. This would
yield confusing unwinding result or errors.
To avoid that introduce CALL_ON_STACK_NORETURN to be used instead. It
makes sure that back_chain is zeroed and unwinder finishes gracefully
ending up at task pt_regs.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02ce94c229 ]
Don't overwrite return value if system call was cancelled at entry by
ptrace. Return status code from do_syscall_trace_enter so that
pt_regs::syscall doesn't need to be changed to skip syscall.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acb874a7c0 ]
It was observed Baytrail-based chromebooks could cause continuous PLL
unlocked when using playback stream and capture stream simultaneously.
Specifically, starting a capture stream after started a playback stream.
As a result, the audio data could corrupt or turn completely silent.
As the datasheet suggested, the maximum PLL lock time should be 7 msec.
The workaround resets the codec softly by toggling SHDN off and on if
PLL failed to lock for 10 msec. Notably, there is no suggested hold
time for SHDN off.
On Baytrail-based chromebooks, it would easily happen continuous PLL
unlocked if there is a 10 msec delay between SHDN off and on. Removes
the msleep().
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-2-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 803e74be04 ]
We must stop GC, once the segment becomes fully valid. Otherwise, it can
produce another dirty segments by moving valid blocks in the segment partially.
Ramon hit no free segment panic sometimes and saw this case happens when
validating reliable file pinning feature.
Signed-off-by: Ramon Pantin <pantin@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bd4540836 ]
Currenly we doesn't assume that a server may break a lease
from RWH to RW which causes us setting a wrong lease state
on a file and thus mistakenly flushing data and byte-range
locks and purging cached data on the client. This leads to
performance degradation because subsequent IOs go directly
to the server.
Fix this by propagating new lease state and epoch values
to the oplock break handler through cifsFileInfo structure
and removing the use of cifsInodeInfo flags for that. It
allows to avoid some races of several lease/oplock breaks
using those flags in parallel.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b1116bbe8 ]
Move the same error code assignments so that such exception handling
can be better reused at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a264abad51 ]
RPC tasks on the backchannel never invoke xprt_complete_rqst(), so
there is no way to report their tk_status at completion. Also, any
RPC task that exits via rpc_exit_task() before it is replied to will
also disappear without a trace.
Introduce a trace point that is symmetrical with rpc_task_begin that
captures the termination status of each RPC task.
Sample trace output for callback requests initiated on the server:
kworker/u8:12-448 [003] 127.025240: rpc_task_end: task:50@3 flags=ASYNC|DYNAMIC|SOFT|SOFTCONN|SENT runstate=RUNNING|ACTIVE status=0 action=rpc_exit_task
kworker/u8:12-448 [002] 127.567310: rpc_task_end: task:51@3 flags=ASYNC|DYNAMIC|SOFT|SOFTCONN|SENT runstate=RUNNING|ACTIVE status=0 action=rpc_exit_task
kworker/u8:12-448 [001] 130.506817: rpc_task_end: task:52@3 flags=ASYNC|DYNAMIC|SOFT|SOFTCONN|SENT runstate=RUNNING|ACTIVE status=0 action=rpc_exit_task
Odd, though, that I never see trace_rpc_task_complete, either in the
forward or backchannel. Should it be removed?
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a817fa73c ]
This is needed primarily to avoid races in dealing with rx aggregation
related data structures
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36f7e2b2bb ]
With the devm API, the unregister happens after the device cleanup is done,
after which the struct mt76_dev which contains the led_cdev has already been
freed. This leads to a use-after-free bug that can crash the system.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c47c1be51 ]
Before this patch, gfs2_create_inode had a use-after-free for the
iopen glock in some error paths because it did this:
gfs2_glock_put(io_gl);
fail_gunlock2:
if (io_gl)
clear_bit(GLF_INODE_CREATING, &io_gl->gl_flags);
In some cases, the io_gl was used for create and only had one
reference, so the glock might be freed before the clear_bit().
This patch tries to straighten it out by only jumping to the
error paths where iopen is properly set, and moving the
gfs2_glock_put after the clear_bit.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3d7c2292d ]
With large eMMC cards, it is possible to create general purpose
partitions that are bigger than 4GB. The size member of the mmc_part
struct is only an unsigned int which overflows for gp partitions larger
than 4GB. Change this to a u64 to handle the overflow.
Signed-off-by: Bradley Bolen <bradleybolen@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9c34bb529 ]
When a new fastmap is about to be written UBI must make sure it has a
free block for a fastmap anchor available. For this ubi_update_fastmap()
calls ubi_ensure_anchor_pebs(). This stopped working with 2e8f08deab
("ubi: Fix races around ubi_refill_pools()"), with this commit the wear
leveling code is blocked and can no longer produce free PEBs. UBI then
more often than not falls back to write the new fastmap anchor to the
same block it was already on which means the same erase block gets
erased during each fastmap write and wears out quite fast.
As the locking prevents us from producing the anchor PEB when we
actually need it, this patch changes the strategy for creating the
anchor PEB. We no longer create it on demand right before we want to
write a fastmap, but instead we create an anchor PEB right after we have
written a fastmap. This gives us enough time to produce a new anchor PEB
before it is needed. To make sure we have an anchor PEB for the very
first fastmap write we call ubi_ensure_anchor_pebs() during
initialisation as well.
Fixes: 2e8f08deab ("ubi: Fix races around ubi_refill_pools()")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a2b5932db ]
The leaf format xattr addition helper xfs_attr3_leaf_add_work()
adjusts the block freemap in a couple places. The first update drops
the size of the freemap that the caller had already selected to
place the xattr name/value data. Before the function returns, it
also checks whether the entries array has encroached on a freemap
range by virtue of the new entry addition. This is necessary because
the entries array grows from the start of the block (but end of the
block header) towards the end of the block while the name/value data
grows from the end of the block in the opposite direction. If the
associated freemap is already empty, however, size is zero and the
subtraction underflows the field and causes corruption.
This is reproduced rarely by generic/070. The observed behavior is
that a smaller sized freemap is aligned to the end of the entries
list, several subsequent xattr additions land in larger freemaps and
the entries list expands into the smaller freemap until it is fully
consumed and then underflows. Note that it is not otherwise a
corruption for the entries array to consume an empty freemap because
the nameval list (i.e. the firstused pointer in the xattr header)
starts beyond the end of the corrupted freemap.
Update the freemap size modification to account for the fact that
the freemap entry can be empty and thus stale.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e840093367 ]
We are overoptimistic about taking the fast path there; seeing
the same value in ->d_parent after having grabbed a reference
to that parent does *not* mean that it has remained our parent
all along.
That wouldn't be a big deal (in the end it is our parent and
we have grabbed the reference we are about to return), but...
the situation with barriers is messed up.
We might have hit the following sequence:
d is a dentry of /tmp/a/b
CPU1: CPU2:
parent = d->d_parent (i.e. dentry of /tmp/a)
rename /tmp/a/b to /tmp/b
rmdir /tmp/a, making its dentry negative
grab reference to parent,
end up with cached parent->d_inode (NULL)
mkdir /tmp/a, rename /tmp/b to /tmp/a/b
recheck d->d_parent, which is back to original
decide that everything's fine and return the reference we'd got.
The trouble is, caller (on CPU1) will observe dget_parent()
returning an apparently negative dentry. It actually is positive,
but CPU1 has stale ->d_inode cached.
Use d->d_seq to see if it has been moved instead of rechecking ->d_parent.
NOTE: we are *NOT* going to retry on any kind of ->d_seq mismatch;
we just go into the slow path in such case. We don't wait for ->d_seq
to become even either - again, if we are racing with renames, we
can bloody well go to slow path anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c13704f568 ]
Previously, the kernel sometimes assigned more MMIO or MMIO_PREF space than
desired. For example, if the user requested 128M of space with
"pci=realloc,hpmemsize=128M", we sometimes assigned 256M:
pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0xa00fffff] = 256M
pci 0000:06:04.0: BAR 14: assigned [mem 0xa0200000-0xb01fffff] = 256M
With this patch applied:
pci 0000:06:01.0: BAR 14: assigned [mem 0x90100000-0x980fffff] = 128M
pci 0000:06:04.0: BAR 14: assigned [mem 0x98200000-0xa01fffff] = 128M
This happened when in the first pass, the MMIO_PREF succeeded but the MMIO
failed. In the next pass, because MMIO_PREF was already assigned, the
attempt to assign MMIO_PREF returned an error code instead of success
(nothing more to do, already allocated). Hence, the size which was actually
allocated, but thought to have failed, was placed in the MMIO window.
The bug resulted in the MMIO_PREF being added to the MMIO window, which
meant doubling if MMIO_PREF size = MMIO size. With a large MMIO_PREF, the
MMIO window would likely fail to be assigned altogether due to lack of
32-bit address space.
Change find_free_bus_resource() to do the following:
- Return first unassigned resource of the correct type.
- If there is none, return first assigned resource of the correct type.
- If none of the above, return NULL.
Returning an assigned resource of the correct type allows the caller to
distinguish between already assigned and no resource of the correct type.
Add checks in pbus_size_io() and pbus_size_mem() to return success if
resource returned from find_free_bus_resource() is already allocated.
This avoids pbus_size_io() and pbus_size_mem() returning error code to
__pci_bus_size_bridges() when a resource has been successfully assigned in
a previous pass. This fixes the existing behaviour where space for a
resource could be reserved multiple times in different parent bridge
windows.
Link: https://lore.kernel.org/lkml/20190531171216.20532-2-logang@deltatee.com/T/#u
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203243
Link: https://lore.kernel.org/r/PS2P216MB075563AA6AD242AA666EDC6A80760@PS2P216MB0755.KORP216.PROD.OUTLOOK.COM
Reported-by: Kit Chow <kchow@gigaio.com>
Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f599d8423 ]
On x86, purgatory() copies the first 640K of memory to a backup region
because the kernel needs those first 640K for the real mode trampoline
during boot, among others.
However, when SME is enabled, the kernel cannot properly copy the old
memory to the backup area but reads only its encrypted contents. The
result is that the crash tool gets invalid pointers when parsing vmcore:
crash> kmem -s|grep -i invalid
kmem: dma-kmalloc-512: slab:ffffd77680001c00 invalid freepointer:a6086ac099f0c5a4
kmem: dma-kmalloc-512: slab:ffffd77680001c00 invalid freepointer:a6086ac099f0c5a4
crash>
So reserve the remaining low 1M memory when the crashkernel option is
specified (after reserving real mode memory) so that allocated memory
does not fall into the low 1M area and thus the copying of the contents
of the first 640k to a backup region in purgatory() can be avoided
altogether.
This way, it does not need to be included in crash dumps or used for
anything except the trampolines that must live in the low 1M.
[ bp: Heavily rewrite commit message, flip check logic in
crash_reserve_low_1M().]
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: bhe@redhat.com
Cc: Dave Young <dyoung@redhat.com>
Cc: d.hatayama@fujitsu.com
Cc: dhowells@redhat.com
Cc: ebiederm@xmission.com
Cc: horms@verge.net.au
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jürgen Gross <jgross@suse.com>
Cc: kexec@lists.infradead.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: vgoyal@redhat.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191108090027.11082-2-lijiang@redhat.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204793
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34cf78bf34 ]
This patch fix a lost wake-up problem caused by the race between
mca_cannibalize_lock and bch_cannibalize_unlock.
Consider two processes, A and B. Process A is executing
mca_cannibalize_lock, while process B takes c->btree_cache_alloc_lock
and is executing bch_cannibalize_unlock. The problem happens that after
process A executes cmpxchg and will execute prepare_to_wait. In this
timeslice process B executes wake_up, but after that process A executes
prepare_to_wait and set the state to TASK_INTERRUPTIBLE. Then process A
goes to sleep but no one will wake up it. This problem may cause bcache
device to dead.
Signed-off-by: Guoju Fang <fangguoju@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ef193822b ]
Bug link: https://bugzilla.kernel.org/show_bug.cgi?id=195657
cmd/rsp buffers are expected to be in the same ACPI region.
For Zen+ CPUs BIOS's might report two different regions, some of
them also report region sizes inconsistent with values from TPM
registers.
Memory configuration on ASRock x470 ITX:
db0a0000-dc59efff : Reserved
dc57e000-dc57efff : MSFT0101:00
dc582000-dc582fff : MSFT0101:00
Work around the issue by storing ACPI regions declared for the
device in a fixed array and adding an array for pointers to
corresponding possibly allocated resources in crb_map_io function.
This data was previously held for a single resource
in struct crb_priv (iobase field) and local variable io_res in
crb_map_io function. ACPI resources array is used to find index of
corresponding region for each buffer and make the buffer size
consistent with region's length. Array of pointers to allocated
resources is used to map the region at most once.
Signed-off-by: Ivan Lazeev <ivan.lazeev@gmail.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b195e10158 ]
If a child device calls mfd_cell_{en,dis}able() without an appropriate
call-back being set, we are likely to encounter a panic. Avoid this
by adding suitable checking.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03976af89e ]
Else there may be a double-free problem, because cfi->cfiq will
be freed by mtd_do_chip_probe() if both the two invocations of
check_cmd_set() return failure.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0a3665f71 ]
This patch fixes the call trace caused by the kernel when the Rx/Tx
descriptor size change request is initiated via ethtool when DCB is
configured. ice_set_ringparam() should use vsi->num_txq instead of
vsi->alloc_txq as it represents the queues that are enabled in the
driver when DCB is enabled/disabled. Otherwise, queue index being
used can go out of range.
For example, when vsi->alloc_txq has 104 queues and with 3 TCS enabled
via DCB, each TC gets 34 queues, vsi->num_txq will be 102 and only 102
queues will be enabled.
Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit add66fcbd3 ]
On architectures where loff_t is wider than pgoff_t, the expression
((page->index + 1) << PAGE_SHIFT) can overflow. Rewrite to use the page
offset, which we already compute here anyway.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 460370ab20 ]
PFN flags are (unsigned long long), fix the alloc_dax_region() calling
convention to fix warnings of the form:
>> include/linux/pfn_t.h:18:17: warning: large integer implicitly truncated to unsigned type [-Woverflow]
#define PFN_DEV (1ULL << (BITS_PER_LONG_LONG - 3))
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c1e803eac ]
When reading sysfs nvme_info file while a remote port leaves and comes
back, a NULL pointer is encountered. The issue is due to ndlp list
corruption as the the nvme_info_show does not use the same lock as the rest
of the code.
Correct by removing the rcu_xxx_lock calls and replace by the host_lock and
phba->hbaLock spinlocks that are used by the rest of the driver. Given
we're called from sysfs, we are safe to use _irq rather than _irqsave.
Link: https://lore.kernel.org/r/20191105005708.7399-4-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53b4b2aeee ]
There is another kHz-conversion bug in the code, resulting in integer
overflow. Although, this time the resulting value is 4294966296 and it's
close to ULONG_MAX, which is okay in this case.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ba01df72b ]
Partitioned request-based devices cannot be used as underlying devices
for request-based DM because no partition offsets are added to each
incoming request. As such, until now, stacking on partitioned devices
would _always_ result in data corruption (e.g. wiping the partition
table, writing to other partitions, etc). Fix this by disallowing
request-based stacking on partitions.
While at it, since all .request_fn support has been removed from block
core, remove legacy dm-table code that differentiated between blk-mq and
.request_fn request-based.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c6082b903 ]
Error was detected by PVS-Studio:
V512 A call of the 'sprintf' function will lead to overflow of
the buffer 'led_data->led_cdev_name'.
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 249bd9087a ]
AIO+DIO can extend the file size on IO completion, and it holds
no inode locks while the IO is in flight. Therefore, a race
condition exists in file size updates if we do something like this:
aio-thread fallocate-thread
lock inode
submit IO beyond inode->i_size
unlock inode
.....
lock inode
break layouts
if (off + len > inode->i_size)
new_size = off + len
.....
inode_dio_wait()
<blocks>
.....
completes
inode->i_size updated
inode_dio_done()
....
<wakes>
<does stuff no long beyond EOF>
if (new_size)
xfs_vn_setattr(inode, new_size)
Yup, that attempt to extend the file size in the fallocate code
turns into a truncate - it removes the whatever the aio write
allocated and put to disk, and reduced the inode size back down to
where the fallocate operation ends.
Fundamentally, xfs_file_fallocate() not compatible with racing
AIO+DIO completions, so we need to move the inode_dio_wait() call
up to where the lock the inode and break the layouts.
Secondly, storing the inode size and then using it unchecked without
holding the ILOCK is not safe; we can only do such a thing if we've
locked out and drained all IO and other modification operations,
which we don't do initially in xfs_file_fallocate.
It should be noted that some of the fallocate operations are
compound operations - they are made up of multiple manipulations
that may zero data, and so we may need to flush and invalidate the
file multiple times during an operation. However, we only need to
lock out IO and other space manipulation operations once, as that
lockout is maintained until the entire fallocate operation has been
completed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e3a7c2ec9 ]
[Why]
We're leaking memory by not freeing the gamma used to calculate the
transfer function for legacy gamma.
[How]
Release the gamma after we're done with it.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49ea07d33d ]
Multiple changes squashed in single patch to avoid tick-tock effect
and avoid breaking compilation/bisect
1. Per the hardware documentation, all changes to MCP_CONFIG,
MCP_CONTROL, MCP_CMDCTRL and MCP_PHYCTRL need to be validated with a
self-clearing write to MCP_CONFIG_UPDATE. Add a helper and do the
update when the CONFIG is changed.
2. Move interrupt enable after interrupt handler registration
3. Add a new helper to start the hardware bus reset with maximum duration
to make sure the Slave(s) correctly detect the reset pattern and to
ensure electrical conflicts can be resolved.
4. flush command FIFOs
Better error handling will be provided after interrupt disable is
provided in follow-up patches.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022235448.17586-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f8a4f1d87 ]
[commit message is verbose for discussion purposes - will trim it
down later. Some questions about implementation details at the end.]
Zorro Lang recently ran a new test to stress single inode extent
counts now that they are no longer limited by memory allocation.
The test was simply:
# xfs_io -f -c "falloc 0 40t" /mnt/scratch/big-file
# ~/src/xfstests-dev/punch-alternating /mnt/scratch/big-file
This test uncovered a problem where the hole punching operation
appeared to finish with no error, but apparently only created 268M
extents instead of the 10 billion it was supposed to.
Further, trying to punch out extents that should have been present
resulted in success, but no change in the extent count. It looked
like a silent failure.
While running the test and observing the behaviour in real time,
I observed the extent coutn growing at ~2M extents/minute, and saw
this after about an hour:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next ; \
> sleep 60 ; \
> xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 127657993
fsxattr.nextents = 129683339
#
And a few minutes later this:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 4177861124
#
Ah, what? Where did that 4 billion extra extents suddenly come from?
Stop the workload, unmount, mount:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 166044375
#
And it's back at the expected number. i.e. the extent count is
correct on disk, but it's screwed up in memory. I loaded up the
extent list, and immediately:
# xfs_io -f -c "stat" /mnt/scratch/big-file |grep next
fsxattr.nextents = 4192576215
#
It's bad again. So, where does that number come from?
xfs_fill_fsxattr():
if (ip->i_df.if_flags & XFS_IFEXTENTS)
fa->fsx_nextents = xfs_iext_count(&ip->i_df);
else
fa->fsx_nextents = ip->i_d.di_nextents;
And that's the behaviour I just saw in a nutshell. The on disk count
is correct, but once the tree is loaded into memory, it goes whacky.
Clearly there's something wrong with xfs_iext_count():
inline xfs_extnum_t xfs_iext_count(struct xfs_ifork *ifp)
{
return ifp->if_bytes / sizeof(struct xfs_iext_rec);
}
Simple enough, but 134M extents is 2**27, and that's right about
where things went wrong. A struct xfs_iext_rec is 16 bytes in size,
which means 2**27 * 2**4 = 2**31 and we're right on target for an
integer overflow. And, sure enough:
struct xfs_ifork {
int if_bytes; /* bytes in if_u1 */
....
Once we get 2**27 extents in a file, we overflow if_bytes and the
in-core extent count goes wrong. And when we reach 2**28 extents,
if_bytes wraps back to zero and things really start to go wrong
there. This is where the silent failure comes from - only the first
2**28 extents can be looked up directly due to the overflow, all the
extents above this index wrap back to somewhere in the first 2**28
extents. Hence with a regular pattern, trying to punch a hole in the
range that didn't have holes mapped to a hole in the first 2**28
extents and so "succeeded" without changing anything. Hence "silent
failure"...
Fix this by converting if_bytes to a int64_t and converting all the
index variables and size calculations to use int64_t types to avoid
overflows in future. Signed integers are still used to enable easy
detection of extent count underflows. This enables scalability of
extent counts to the limits of the on-disk format - MAXEXTNUM
(2**31) extents.
Current testing is at over 500M extents and still going:
fsxattr.nextents = 517310478
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cf78b6b12 ]
When the option is RTC_PLL_GET, pll will be copied to userland
via copy_to_user. pll is initialized using mach_get_rtc_pll indirect
call and mach_get_rtc_pll is only assigned with function
q40_get_rtc_pll in arch/m68k/q40/config.c.
In function q40_get_rtc_pll, the field pll_ctrl is not initialized.
This will leak uninitialized stack content to userland.
Fix this by zeroing the uninitialized field.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Link: https://lore.kernel.org/r/20190927121544.7650-1-huangfq.daxian@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83d116c530 ]
When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there
will be a double page fault in __copy_from_user_inatomic of cow_user_page.
To reproduce the bug, the cmd is as follows after you deployed everything:
make -C src/test/vmmalloc_fork/ TEST_TIME=60m check
Below call trace is from arm64 do_page_fault for debugging purpose:
[ 110.016195] Call trace:
[ 110.016826] do_page_fault+0x5a4/0x690
[ 110.017812] do_mem_abort+0x50/0xb0
[ 110.018726] el1_da+0x20/0xc4
[ 110.019492] __arch_copy_from_user+0x180/0x280
[ 110.020646] do_wp_page+0xb0/0x860
[ 110.021517] __handle_mm_fault+0x994/0x1338
[ 110.022606] handle_mm_fault+0xe8/0x180
[ 110.023584] do_page_fault+0x240/0x690
[ 110.024535] do_mem_abort+0x50/0xb0
[ 110.025423] el0_da+0x20/0x24
The pte info before __copy_from_user_inatomic is (PTE_AF is cleared):
[ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003,
pmd=000000023d4b3003, pte=360000298607bd3
As told by Catalin: "On arm64 without hardware Access Flag, copying from
user will fail because the pte is old and cannot be marked young. So we
always end up with zeroed page after fork() + CoW for pfn mappings. we
don't always have a hardware-managed access flag on arm64."
This patch fixes it by calling pte_mkyoung. Also, the parameter is
changed because vmf should be passed to cow_user_page()
Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error
in case there can be some obscure use-case (by Kirill).
[1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork
Signed-off-by: Jia He <justin.he@arm.com>
Reported-by: Yibo Cai <Yibo.Cai@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35ff867b76 ]
When sriov_numvfs is being updated, we call the driver->sriov_configure()
function, which may enable VFs and call probe functions, which may make new
devices visible. This all happens before before sriov_numvfs_store()
updates sriov->num_VFs, so previously, concurrent sysfs reads of
sriov_numvfs returned stale values.
Serialize the sysfs read vs the write so the read returns the correct
num_VFs value.
[bhelgaas: hold device_lock instead of checking mutex_is_locked()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=202991
Link: https://lore.kernel.org/r/20190911072736.32091-1-pierre.cregut@orange.com
Signed-off-by: Pierre Crégut <pierre.cregut@orange.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 486a884984 ]
The memory of ar->debug.tpc_stats_final is reallocated every debugfs
reading, it should be freed in ath10k_debug_destroy() for the last
allocation.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00035
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5329b2d5b ]
If firmware reports rate_max > WMI_TPC_RATE_MAX(WMI_TPC_FINAL_RATE_MAX)
or num_tx_chain > WMI_TPC_TX_N_CHAIN, it will cause array out-of-bounds
access, so print a warning and reset to avoid memory corruption.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00035
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c98f021e4 ]
Make dma_fence_enable_sw_signaling() behave like its
dma_fence_add_callback() and dma_fence_default_wait() counterparts and
perform the test to enable signaling under the fence->lock, along with
the action to do so. This ensure that should an implementation be trying
to flush the cb_list (by signaling) on retirement before freeing the
fence, it can do so in a race-free manner.
See also 0fc89b6802 ("dma-fence: Simply wrap dma_fence_signal_locked
with dma_fence_signal").
v2: Refactor all 3 enable_signaling paths to use a common function.
v3: Don't argue, just keep the tracepoint in the existing spot.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004101140.32713-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bd0a112ec ]
[WHY]
When changing DPP global ref clock, DTO adjustments must take effect
immediately, or else underflow may occur.
It appears the original decision to double-buffer DTO adjustments was made to
prevent underflows that occur when raising DPP ref clock (which is not
double-buffered), but that same decision causes similar issues when
lowering DPP global ref clock. The better solution is to order the
adjustments according to whether clocks are being raised or lowered.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e3e24b420 ]
Currently, the SELinux LSM prevents one from setting the
`security.selinux` xattr on an inode without a policy first being
loaded. However, this restriction is problematic: it makes it impossible
to have newly created files with the correct label before actually
loading the policy.
This is relevant in distributions like Fedora, where the policy is
loaded by systemd shortly after pivoting out of the initrd. In such
instances, all files created prior to pivoting will be unlabeled. One
then has to relabel them after pivoting, an operation which inherently
races with other processes trying to access those same files.
Going further, there are use cases for creating the entire root
filesystem on first boot from the initrd (e.g. Container Linux supports
this today[1], and we'd like to support it in Fedora CoreOS as well[2]).
One can imagine doing this in two ways: at the block device level (e.g.
laying down a disk image), or at the filesystem level. In the former,
labeling can simply be part of the image. But even in the latter
scenario, one still really wants to be able to set the right labels when
populating the new filesystem.
This patch enables this by changing behaviour in the following two ways:
1. allow `setxattr` if we're not initialized
2. don't try to set the in-core inode SID if we're not initialized;
instead leave it as `LABEL_INVALID` so that revalidation may be
attempted at a later time
Note the first hunk of this patch is mostly the same as a previously
discussed one[3], though it was part of a larger series which wasn't
accepted.
[1] https://coreos.com/os/docs/latest/root-filesystem-placement.html
[2] https://github.com/coreos/fedora-coreos-tracker/issues/94
[3] https://www.spinics.net/lists/linux-initramfs/msg04593.html
Co-developed-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 359e10f087 ]
After exchanging PLOGI on an SLI-3 adapter, the PRLI exchange failed. Link
trace showed the port was assigned a non-zero n_port_id, but didn't use the
address on the PRLI. The assigned address is set on the port by the
CONFIG_LINK mailbox command. The driver responded to the PRLI before the
mailbox command completed. Thus the PRLI response used the old n_port_id.
Defer the PRLI response until CONFIG_LINK completes.
Link: https://lore.kernel.org/r/20190922035906.10977-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When operating as a USB device, when the device is disconnected the suspend interrupt is called rather than the disconnect interrupt, this results in the state remaining as "configured". This change changes the state to "not attached" instead when the suspend interrupt is called.
"cac8c90 staging: vc04_service: codec: Allow start_streaming to update
the buffernum" allowed the number of buffers configured to be decreased
as well as increased, but there is no requirement for all buffers to
have been queued when start_streaming is called.
Only allow increasing the buffernum.
Fixes: "cac8c90 staging: vc04_service: codec: Allow start_streaming to update the buffernum"
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
cs42xx8.c exports cs42xx8_of_match, so there's no need to redefine it
in cs42xx8-i2c.c - doing so breaks linking when loadable module
support is disabled. It would be tidy to use the exported match table
in cs42xx8.c's of_match_table member, but an imported symbol can't be
used in a module's MODULE_DEVICE_TABLE declaration. Instead, rename
the duplicated declarations so as not to clash.
See: https://github.com/raspberrypi/linux/issues/3873
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
If the RBUF logic is not reset when the kernel starts then there
may be some data left over from any network boot loader. If the
64-byte packet headers are enabled then this can be fatal.
Extend bcmgenet_dma_disable to do perform the reset, but not when
called from bcmgenet_resume in order to preserve a wake packet.
N.B. This different handling of resume is just based on a hunch -
why else wouldn't one reset the RBUF as well as the TBUF? If this
isn't the case then it's easy to change the patch to make the RBUF
reset unconditional.
See: https://github.com/raspberrypi/linux/issues/3850
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
commit e52d58d54a upstream.
When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode),
current driver disables interrupt remapping when it updates the IRTE
so that the upper and lower 64-bit values can be updated safely.
However, this creates a small window, where the interrupt could
arrive and result in IO_PAGE_FAULT (for interrupt) as shown below.
IOMMU Driver Device IRQ
============ ===========
irte.RemapEn=0
...
change IRTE IRQ from device ==> IO_PAGE_FAULT !!
...
irte.RemapEn=1
This scenario has been observed when changing irq affinity on a system
running I/O-intensive workload, in which the destination APIC ID
in the IRTE is updated.
Instead, use cmpxchg_double() to update the 128-bit IRTE at once without
disabling the interrupt remapping. However, this means several features,
which require GA (128-bit IRTE) support will also be affected if cmpxchg16b
is not supported (which is unprecedented for AMD processors w/ IOMMU).
Fixes: 880ac60e25 ("iommu/amd: Introduce interrupt remapping ops structure")
Reported-by: Sean Osborne <sean.m.osborne@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Erik Rockstrom <erik.rockstrom@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200903093822.52012-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3336cab25 upstream.
We've met softlockup with "CONFIG_PREEMPT_NONE=y", when the target memcg
doesn't have any reclaimable memory.
It can be easily reproduced as below:
watchdog: BUG: soft lockup - CPU#0 stuck for 111s![memcg_test:2204]
CPU: 0 PID: 2204 Comm: memcg_test Not tainted 5.9.0-rc2+ #12
Call Trace:
shrink_lruvec+0x49f/0x640
shrink_node+0x2a6/0x6f0
do_try_to_free_pages+0xe9/0x3e0
try_to_free_mem_cgroup_pages+0xef/0x1f0
try_charge+0x2c1/0x750
mem_cgroup_charge+0xd7/0x240
__add_to_page_cache_locked+0x2fd/0x370
add_to_page_cache_lru+0x4a/0xc0
pagecache_get_page+0x10b/0x2f0
filemap_fault+0x661/0xad0
ext4_filemap_fault+0x2c/0x40
__do_fault+0x4d/0xf9
handle_mm_fault+0x1080/0x1790
It only happens on our 1-vcpu instances, because there's no chance for
oom reaper to run to reclaim the to-be-killed process.
Add a cond_resched() at the upper shrink_node_memcgs() to solve this
issue, this will mean that we will get a scheduling point for each memcg
in the reclaimed hierarchy without any dependency on the reclaimable
memory in that memcg thus making it more predictable.
Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/1598495549-67324-1-git-send-email-xlpang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Julius Hemanth Pitti <jpitti@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5116a8ade3 ]
When phy_is_started() was added to catch incorrect PHY states,
phy_stop() would not be qualified against PHY_DOWN. It is possible to
reach that state when the PHY driver has been unbound and the network
device is then brought down.
Fixes: 2b3e88ea65 ("net: phy: improve phy state checking")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2b727df7c ]
If we have unbound the PHY driver prior to calling phy_detach() (often
via phy_disconnect()) then we can cause a NULL pointer de-reference
accessing the driver owner member. The steps to reproduce are:
echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind
ip link set eth0 down
Fixes: cafe8df8b9 ("net: phy: Fix lack of reference count on PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9423361da5 ]
The napi_schedule() call will only schedule the NAPI if it is not
already running. To make sure that we do not deactivate interrupts
without scheduling NAPI only deactivate the interrupts in case NAPI also
gets scheduled.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c582a7fea9 ]
Use napi_complete_done() and activate the interrupts when this function
returns true. This way the generic NAPI code can take care of activating
the interrupts.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 74c7b80e22 ]
netif_tx_napi_add() should be used for NAPI in the TX direction instead
of the netif_napi_add() function.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dea36631e6 ]
The call to netif_wake_queue() when the TX descriptors were freed was
missing. When there are no TX buffers available the TX queue will be
stopped, but it was not started again when they are available again,
this is fixed in this patch.
Fixes: fe1a56420c ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d69753fa1e ]
Returning "unknown" as a temperature value violates the hwmon interface
rules. Appropriate error codes should be returned via device_attribute
show instead. These will ultimately be propagated to the user via the
file system interface.
In addition to the corrected error handling, it is an even better idea to
not present the sensor in sysfs at all if it is known that the read will
definitely fail. Given that temp1_input is currently the only sensor
reported, ensure no hwmon registration if TEMP_MONITOR_QUERY is not
supported or if it will fail due to access permissions. Something smarter
may be needed if and when other sensors are added.
Fixes: 12cce90b93 ("bnxt_en: fix HWRM error when querying VF temperature")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8f0bcd19b1 ]
The set of TLS TX global SW counters in mlx5e_tls_sw_stats_desc
is updated from all rings by using atomic ops.
This set of stats is used only in the FPGA TLS use case, not in
the Connect-X TLS one, where regular per-ring counters are used.
Do not expose them in the Connect-X use case, as this would cause
counter duplication. For example, tx_tls_drop_no_sync_data would
appear twice in the ethtool stats.
Fixes: d2ead1f360 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6cec0229ab ]
The cited commit creates peer miss group during switchdev mode
initialization in order to handle miss packets correctly while in VF
LAG mode. This is done regardless of FW support of such groups which
could cause rules setups failure later on.
Fix by adding FW capability check before creating peer groups/rule.
Fixes: ac004b8321 ("net/mlx5e: E-Switch, Add peer miss rules")
Signed-off-by: Maor Dickman <maord@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ff48b6222e ]
In tipc_buf_append() it may change skb's frag_list, and it causes
problems when this skb is cloned. skb_unclone() doesn't really
make this skb's flag_list available to change.
Shuang Li has reported an use-after-free issue because of this
when creating quite a few macvlan dev over the same dev, where
the broadcast packets will be cloned and go up to the stack:
[ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0
[ ] Call Trace:
[ ] dump_stack+0x7c/0xb0
[ ] print_address_description.constprop.7+0x1a/0x220
[ ] kasan_report.cold.10+0x37/0x7c
[ ] check_memory_region+0x183/0x1e0
[ ] pskb_expand_head+0x86d/0xea0
[ ] process_backlog+0x1df/0x660
[ ] net_rx_action+0x3b4/0xc90
[ ]
[ ] Allocated by task 1786:
[ ] kmem_cache_alloc+0xbf/0x220
[ ] skb_clone+0x10a/0x300
[ ] macvlan_broadcast+0x2f6/0x590 [macvlan]
[ ] macvlan_process_broadcast+0x37c/0x516 [macvlan]
[ ] process_one_work+0x66a/0x1060
[ ] worker_thread+0x87/0xb10
[ ]
[ ] Freed by task 3253:
[ ] kmem_cache_free+0x82/0x2a0
[ ] skb_release_data+0x2c3/0x6e0
[ ] kfree_skb+0x78/0x1d0
[ ] tipc_recvmsg+0x3be/0xa40 [tipc]
So fix it by using skb_unshare() instead, which would create a new
skb for the cloned frag and it'll be safe to change its frag_list.
The similar things were also done in sctp_make_reassembled_event(),
which is using skb_copy().
Reported-by: Shuang Li <shuali@redhat.com>
Fixes: 37e22164a8 ("tipc: rename and move message reassembly function")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a4b5cc9e10 ]
I confirmed that the problem fixed by commit 2a63866c8b ("tipc: fix
shutdown() of connectionless socket") also applies to stream socket.
----------
#include <sys/socket.h>
#include <unistd.h>
#include <sys/wait.h>
int main(int argc, char *argv[])
{
int fds[2] = { -1, -1 };
socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds);
if (fork() == 0)
_exit(read(fds[0], NULL, 1));
shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */
wait(NULL); /* To be woken up by _exit(). */
return 0;
}
----------
Since shutdown(SHUT_RDWR) should affect all processes sharing that socket,
unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right
behavior.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b5b73b26b3 ]
It's possible that the user specifies an interval that couldn't allow
any packet to be transmitted. This also avoids the issue of the
hrtimer handler starving the other threads because it's running too
often.
The solution is to reject interval sizes that according to the current
link speed wouldn't allow any packet to be transmitted.
Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com
Fixes: 5a781ccbd1 ("tc: Add support for configuring the taprio scheduler")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fe81d9f618 ]
When calculating ancestor_size with IPv6 enabled, simply using
sizeof(struct ipv6_pinfo) doesn't account for extra bytes needed for
alignment in the struct sctp6_sock. On x86, there aren't any extra
bytes, but on ARM the ipv6_pinfo structure is aligned on an 8-byte
boundary so there were 4 pad bytes that were omitted from the
ancestor_size calculation. This would lead to corruption of the
pd_lobby pointers, causing an oops when trying to free the sctp
structure on socket close.
Fixes: 636d25d557 ("sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant")
Signed-off-by: Henry Ptasinski <hptasinski@google.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2fb541c862 ]
Currently there is concurrent reset and enqueue operation for the
same lockless qdisc when there is no lock to synchronize the
q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in
qdisc_deactivate() called by dev_deactivate_queue(), which may cause
out-of-bounds access for priv->ring[] in hns3 driver if user has
requested a smaller queue num when __dev_xmit_skb() still enqueue a
skb with a larger queue_mapping after the corresponding qdisc is
reset, and call hns3_nic_net_xmit() with that skb later.
Reused the existing synchronize_net() in dev_deactivate_many() to
make sure skb with larger queue_mapping enqueued to old qdisc(which
is saved in dev_queue->qdisc_sleeping) will always be reset when
dev_reset_queue() is called.
Fixes: 6b3ba9146f ("net: sched: allow qdiscs to handle locking")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cefc23554f ]
Currently, when an FTE is allocated, its refcount is decreased to 0
with the purpose it will not be a stand alone steering object and every
rule (destination) of the FTE would increase the refcount.
When mlx5_cleanup_fs is called while not all rules were deleted by the
steering users, it hit refcount underflow on the FTE once clean_tree
calls to tree_remove_node after the deleted rules already decreased
the refcount to 0.
FTE is no longer destroyed implicitly when the last rule (destination)
is deleted. mlx5_del_flow_rules avoids it by increasing the refcount on
the FTE and destroy it explicitly after all rules were deleted. So we
can avoid the refcount underflow by making FTE as stand alone object.
In addition need to set del_hw_func to FTE so the HW object will be
destroyed when the FTE is deleted from the cleanup_tree flow.
refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 15715 at lib/refcount.c:28 refcount_warn_saturate+0xd9/0xe0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
tree_put_node+0xf2/0x140 [mlx5_core]
clean_tree+0x4e/0xf0 [mlx5_core]
clean_tree+0x4e/0xf0 [mlx5_core]
clean_tree+0x4e/0xf0 [mlx5_core]
clean_tree+0x5f/0xf0 [mlx5_core]
clean_tree+0x4e/0xf0 [mlx5_core]
clean_tree+0x5f/0xf0 [mlx5_core]
mlx5_cleanup_fs+0x26/0x270 [mlx5_core]
mlx5_unload+0x2e/0xa0 [mlx5_core]
mlx5_unload_one+0x51/0x120 [mlx5_core]
mlx5_devlink_reload_down+0x51/0x90 [mlx5_core]
devlink_reload+0x39/0x120
? devlink_nl_cmd_reload+0x43/0x220
genl_rcv_msg+0x1e4/0x420
? genl_family_rcv_msg_attrs_parse+0x100/0x100
netlink_rcv_skb+0x47/0x110
genl_rcv+0x24/0x40
netlink_unicast+0x217/0x2f0
netlink_sendmsg+0x30f/0x430
sock_sendmsg+0x30/0x40
__sys_sendto+0x10e/0x140
? handle_mm_fault+0xc4/0x1f0
? do_page_fault+0x33f/0x630
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x48/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 718ce4d601 ("net/mlx5: Consolidate update FTE for all removal changes")
Fixes: bd71b08ec2 ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db7cd91a4b ]
When IPV6_SEG6_HMAC is enabled and CRYPTO is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for CRYPTO_HMAC
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]
WARNING: unmet direct dependencies detected for CRYPTO_SHA1
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]
WARNING: unmet direct dependencies detected for CRYPTO_SHA256
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]
The reason is that IPV6_SEG6_HMAC selects CRYPTO_HMAC, CRYPTO_SHA1, and
CRYPTO_SHA256 without depending on or selecting CRYPTO while those configs
are subordinate to CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e1b9efe6ba ]
When a netdev is enslaved to a bridge, its parent identifier is queried.
This is done so that packets that were already forwarded in hardware
will not be forwarded again by the bridge device between netdevs
belonging to the same hardware instance.
The operation fails when the netdev is an upper of netdevs with
different parent identifiers.
Instead of failing the enslavement, have dev_get_port_parent_id() return
'-EOPNOTSUPP' which will signal the bridge to skip the query operation.
Other callers of the function are not affected by this change.
Fixes: 7e1146e8c1 ("net: devlink: introduce devlink_compat_switch_id_get() helper")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4ddcaf1ebb ]
When removing a port from a VLAN we are just erasing the
member config for the VLAN, which is wrong: other ports
can be using it.
Just mask off the port and only zero out the rest of the
member config once ports using of the VLAN are removed
from it.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: d8652956cf ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 297e77e53e ]
The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The
field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where
each value is a number of a buffer to direct that priority's traffic to.
That value is however never validated to lie within the bounds set by
DCBX_MAX_BUFFERS. The only driver that currently implements the callback is
mlx5 (maintainers CCd), and that does not do any validation either, in
particual allowing incorrect configuration if the prio2buffer value does
not fit into 4 bits.
Instead of offloading the need to validate the buffer index to drivers, do
it right there in core, and bounce the request if the value is too large.
CC: Parav Pandit <parav@nvidia.com>
CC: Saeed Mahameed <saeedm@nvidia.com>
Fixes: e549f6f9c0 ("net/dcb: Add dcbnl buffer attribute")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 99f62a7460 ]
When calling the RCU brother of br_vlan_get_pvid(), lockdep warns:
=============================
WARNING: suspicious RCU usage
5.9.0-rc3-01631-g13c17acb8e38-dirty #814 Not tainted
-----------------------------
net/bridge/br_private.h:1054 suspicious rcu_dereference_protected() usage!
Call trace:
lockdep_rcu_suspicious+0xd4/0xf8
__br_vlan_get_pvid+0xc0/0x100
br_vlan_get_pvid_rcu+0x78/0x108
The warning is because br_vlan_get_pvid_rcu() calls nbp_vlan_group()
which calls rtnl_dereference() instead of rcu_dereference(). In turn,
rtnl_dereference() calls rcu_dereference_protected() which assumes
operation under an RCU write-side critical section, which obviously is
not the case here. So, when the incorrect primitive is used to access
the RCU-protected VLAN group pointer, READ_ONCE() is not used, which may
cause various unexpected problems.
I'm sad to say that br_vlan_get_pvid() and br_vlan_get_pvid_rcu() cannot
share the same implementation. So fix the bug by splitting the 2
functions, and making br_vlan_get_pvid_rcu() retrieve the VLAN groups
under proper locking annotations.
Fixes: 7582f5b70f ("bridge: add br_vlan_get_pvid_rcu()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2fbc6e89b2 ]
Kfir reported that pmtu exceptions are not created properly for
deployments where multipath routes use the same device.
After some digging I see 2 compounding problems:
1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after*
the route lookup. This is the second use case where this has
been a problem (the first is related to use of vti devices with
VRF). I can not find any reason for the oif to be changed after the
lookup; the code goes back to the start of git. It does not seem
logical so remove it.
2. fib_lookups for exceptions do not call fib_select_path to handle
multipath route selection based on the hash.
The end result is that the fib_lookup used to add the exception
always creates it based using the first leg of the route.
An example topology showing the problem:
| host1
+------+
| eth0 | .209
+------+
|
+------+
switch | br0 |
+------+
|
+---------+---------+
| host2 | host3
+------+ +------+
| eth0 | .250 | eth0 | 192.168.252.252
+------+ +------+
+-----+ +-----+
| vti | .2 | vti | 192.168.247.3
+-----+ +-----+
\ /
=================================
tunnels
192.168.247.1/24
for h in host1 host2 host3; do
ip netns add ${h}
ip -netns ${h} link set lo up
ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1
done
ip netns add switch
ip -netns switch li set lo up
ip -netns switch link add br0 type bridge stp 0
ip -netns switch link set br0 up
for n in 1 2 3; do
ip -netns switch link add eth-sw type veth peer name eth-h${n}
ip -netns switch li set eth-h${n} master br0 up
ip -netns switch li set eth-sw netns host${n} name eth0
done
ip -netns host1 addr add 192.168.252.209/24 dev eth0
ip -netns host1 link set dev eth0 up
ip -netns host1 route add 192.168.247.0/24 \
nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0
ip -netns host2 addr add 192.168.252.250/24 dev eth0
ip -netns host2 link set dev eth0 up
ip -netns host2 addr add 192.168.252.252/24 dev eth0
ip -netns host3 link set dev eth0 up
ip netns add tunnel
ip -netns tunnel li set lo up
ip -netns tunnel li add br0 type bridge
ip -netns tunnel li set br0 up
for n in $(seq 11 20); do
ip -netns tunnel addr add dev br0 192.168.247.${n}/24
done
for n in 2 3
do
ip -netns tunnel link add vti${n} type veth peer name eth${n}
ip -netns tunnel link set eth${n} mtu 1360 master br0 up
ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up
ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24
done
ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3
ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11
ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15
ip -netns host1 ro ls cache
Before this patch the cache always shows exceptions against the first
leg in the multipath route; 192.168.252.250 per this example. Since the
hash has an initial random seed, you may need to vary the final octet
more than what is listed. In my tests, using addresses between 11 and 19
usually found 1 that used both legs.
With this patch, the cache will have exceptions for both legs.
Fixes: 4895c771c7 ("ipv4: Add FIB nexthop exceptions")
Reported-by: Kfir Itzhak <mastertheknife@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1869e226a7 ]
flowi4_multipath_hash was added by the commit referenced below for
tunnels. Unfortunately, the patch did not initialize the new field
for several fast path lookups that do not initialize the entire flow
struct to 0. Fix those locations. Currently, flowi4_multipath_hash
is random garbage and affects the hash value computed by
fib_multipath_hash for multipath selection.
Fixes: 24ba14406c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ba9e04a7dd ]
Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we
echo the TOS value of the received packets in the response.
However, we do not want to echo the lower 2 ECN bits in accordance
with RFC 3168 6.1.5 robustness principles.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 66d42ed8b2 ]
There are a couple bugs here:
1) If opt[1] is zero then this results in a forever loop. If the value
is less than 2 then it is invalid.
2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can
result in memory corruption.
In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead
of "len" because, if "opt[1]" is less than sizeof(valid_accm) then
"nak_len" gets out of sync and it can lead to memory corruption in the
next iterations through the loop. In case of LCP_OPTION_MAGIC, the
only valid value for opt[1] is 6, but the code is trying to log invalid
data so we should only discard the data when "len" is less than 6
because that leads to a read overflow.
Reported-by: ChenNan Of Chaitin Security Research Lab <whutchennan@gmail.com>
Fixes: e022c2f07a ("WAN: new synchronous PPP implementation for generic HDLC.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 34beb21594 ]
This patch adds transport ports information for route lookup so that
IPsec can select Geneve tunnel traffic to do encryption. This is
needed for OVS/OVN IPsec with encrypted Geneve tunnels.
This can be tested by configuring a host-host VPN using an IKE
daemon and specifying port numbers. For example, for an
Openswan-type configuration, the following parameters should be
configured on both hosts and IPsec set up as-per normal:
$ cat /etc/ipsec.conf
conn in
...
left=$IP1
right=$IP2
...
leftprotoport=udp/6081
rightprotoport=udp
...
conn out
...
left=$IP1
right=$IP2
...
leftprotoport=udp
rightprotoport=udp/6081
...
The tunnel can then be setup using "ip" on both hosts (but
changing the relevant IP addresses):
$ ip link add tun type geneve id 1000 remote $IP2
$ ip addr add 192.168.0.1/24 dev tun
$ ip link set tun up
This can then be tested by pinging from $IP1:
$ ping 192.168.0.2
Without this patch the traffic is unencrypted on the wire.
Fixes: 2d07dc79fe ("geneve: add initial netdev driver for GENEVE tunnels")
Signed-off-by: Qiuyu Xiao <qiuyu.xiao.qyx@gmail.com>
Signed-off-by: Mark Gray <mark.d.gray@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 94cc242a06 ]
Pass the correct offset to clear the stale filter hit
bytes counter. Otherwise, the counter starts incrementing
from the stale information, instead of 0.
Fixes: 12b276fbf6 ("cxgb4: add support to create hash filters")
Signed-off-by: Ganji Aravind <ganji.aravind@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f4a26a9b31 ]
Fix the memory leak in mps during module unload
path by freeing mps reference entries if the list
adpter->mps_ref is not already empty
Fixes: 28b3870578 ("cxgb4: Re-work the logic for mps refcounting")
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b16939b59c ]
bnxt_fw_reset_task() which runs from a workqueue can race with
bnxt_remove_one(). For example, if firmware reset and VF FLR are
happening at about the same time.
bnxt_remove_one() already cancels the workqueue and waits for it
to finish, but we need to do this earlier before the devlink
reporters are destroyed. This will guarantee that
the devlink reporters will always be valid when bnxt_fw_reset_task()
is still running.
Fixes: b148bb238c ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b340dc680e ]
When the driver goes through PCIe AER reset in error state, all
firmware messages will timeout because the PCIe bus is no longer
accessible. This can lead to AER reset taking many minutes to
complete as each firmware command takes time to timeout.
Define a new macro BNXT_NO_FW_ACCESS() to skip these firmware messages
when either firmware is in fatal error state or when
pci_channel_offline() is true. It now takes a more reasonable 20 to
30 seconds to complete AER recovery.
Fixes: b4fff2079d ("bnxt_en: Do not send firmware messages if firmware is in error state.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc8e58f832 ]
The following deadlock scenario is triggered by syzbot:
Thread A: Thread B:
tcf_idr_check_alloc()
...
populate_metalist()
rtnl_unlock()
rtnl_lock()
...
request_module() tcf_idr_check_alloc()
rtnl_lock()
At this point, thread A is waiting for thread B to release RTNL
lock, while thread B is waiting for thread A to commit the IDR
change with tcf_idr_insert() later.
Break this deadlock situation by preloading ife modules earlier,
before tcf_idr_check_alloc(), this is fine because we only need
to load modules we need potentially.
Reported-and-tested-by: syzbot+80e32b5d1f9923f8ace6@syzkaller.appspotmail.com
Fixes: 0190c1d452 ("net: sched: atomically check-allocate action")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ec0abae6dc ]
A migrating transparent huge page has to already be unmapped. Otherwise,
the page could be modified while it is being copied to a new page and data
could be lost. The function __split_huge_pmd() checks for a PMD migration
entry before calling __split_huge_pmd_locked() leading one to think that
__split_huge_pmd_locked() can handle splitting a migrating PMD.
However, the code always increments the page->_mapcount and adjusts the
memory control group accounting assuming the page is mapped.
Also, if the PMD entry is a migration PMD entry, the call to
is_huge_zero_pmd(*pmd) is incorrect because it calls pmd_pfn(pmd) instead
of migration_entry_to_pfn(pmd_to_swp_entry(pmd)). Fix these problems by
checking for a PMD migration entry.
Fixes: 84c3fc4e9c ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org> [4.14+]
Link: https://lkml.kernel.org/r/20200903183140.19055-1-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ae4dff882 ]
Indentation and logic clearly show that this code is missing
parenthesis.
Fixes: 9f13457377 ("ibmvnic fix NULL tx_pools and rx_tools issue at do_reset")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f13457377 ]
At the time of do_rest, ibmvnic tries to re-initalize the tx_pools
and rx_pools to avoid re-allocating the long term buffer. However
there is a window inside do_reset that the tx_pools and
rx_pools were freed before re-initialized making it possible to deference
null pointers.
This patch fix this issue by always check the tx_pool
and rx_pool are not NULL after ibmvnic_login. If so, re-allocating
the pools. This will avoid getting into calling reset_tx/rx_pools with
NULL adapter tx_pools/rx_pools pointer. Also add null pointer check in
reset_tx_pools and reset_rx_pools to safe handle NULL pointer case.
Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e2ec512825 upstream.
DM was calling generic_fsdax_supported() to determine whether a device
referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that
they don't have to duplicate common generic checks. High level code
should call dax_supported() helper which that calls into appropriate
helper for the particular device. This problem manifested itself as
kernel messages:
dm-3: error: dax access failed (-95)
when lvm2-testsuite run in cases where a DM device was stacked on top of
another DM device.
Fixes: 7bf7eac8d6 ("dax: Arrange for dax_supported check to span multiple devices")
Cc: <stable@vger.kernel.org>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9683182612 upstream.
There is a race during page offline that can lead to infinite loop:
a page never ends up on a buddy list and __offline_pages() keeps
retrying infinitely or until a termination signal is received.
Thread#1 - a new process:
load_elf_binary
begin_new_exec
exec_mmap
mmput
exit_mmap
tlb_finish_mmu
tlb_flush_mmu
release_pages
free_unref_page_list
free_unref_page_prepare
set_pcppage_migratetype(page, migratetype);
// Set page->index migration type below MIGRATE_PCPTYPES
Thread#2 - hot-removes memory
__offline_pages
start_isolate_page_range
set_migratetype_isolate
set_pageblock_migratetype(page, MIGRATE_ISOLATE);
Set migration type to MIGRATE_ISOLATE-> set
drain_all_pages(zone);
// drain per-cpu page lists to buddy allocator.
Thread#1 - continue
free_unref_page_commit
migratetype = get_pcppage_migratetype(page);
// get old migration type
list_add(&page->lru, &pcp->lists[migratetype]);
// add new page to already drained pcp list
Thread#2
Never drains pcp again, and therefore gets stuck in the loop.
The fix is to try to drain per-cpu lists again after
check_pages_isolated_cb() fails.
Fixes: c52e75935f ("mm: remove extra drain pages on pcp list")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200903140032.380431-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20200904151448.100489-2-pasha.tatashin@soleen.com
Link: http://lkml.kernel.org/r/20200904070235.GA15277@dhcp22.suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02186d8897 upstream.
A recent fix to the dm_dax_supported() flow uncovered a latent bug. When
dm_get_live_table() fails it is still required to drop the
srcu_read_lock(). Without this change the lvm2 test-suite triggers this
warning:
# lvm2-testsuite --only pvmove-abort-all.sh
WARNING: lock held when returning to user space!
5.9.0-rc5+ #251 Tainted: G OE
------------------------------------------------
lvm/1318 is leaving the kernel with locks still held!
1 lock held by lvm/1318:
#0: ffff9372abb5a340 (&md->io_barrier){....}-{0:0}, at: dm_get_live_table+0x5/0xb0 [dm_mod]
...and later on this hang signature:
INFO: task lvm:1344 blocked for more than 122 seconds.
Tainted: G OE 5.9.0-rc5+ #251
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:lvm state:D stack: 0 pid: 1344 ppid: 1 flags:0x00004000
Call Trace:
__schedule+0x45f/0xa80
? finish_task_switch+0x249/0x2c0
? wait_for_completion+0x86/0x110
schedule+0x5f/0xd0
schedule_timeout+0x212/0x2a0
? __schedule+0x467/0xa80
? wait_for_completion+0x86/0x110
wait_for_completion+0xb0/0x110
__synchronize_srcu+0xd1/0x160
? __bpf_trace_rcu_utilization+0x10/0x10
__dm_suspend+0x6d/0x210 [dm_mod]
dm_suspend+0xf6/0x140 [dm_mod]
Fixes: 7bf7eac8d6 ("dax: Arrange for dax_supported check to span multiple devices")
Cc: <stable@vger.kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Reported-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Link: https://lore.kernel.org/r/160045867590.25663.7548541079217827340.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 437ef802e0 upstream.
There are 2 problems with it:
1. "<" vs expected "<<"
2. the shift number is an IOMMU page number mask, not an address
mask as the IOMMU page shift is missing.
This did not hit us before f1565c24b5 ("powerpc: use the generic
dma_ops_bypass mode") because we had additional code to handle bypass
mask so this chunk (almost?) never executed.However there were
reports that aacraid does not work with "iommu=nobypass".
After f1565c24b5, aacraid (and probably others which call
dma_get_required_mask() before setting the mask) was unable to enable
64bit DMA and fall back to using IOMMU which was known not to work,
one of the problems is double free of an IOMMU page.
This fixes DMA for aacraid, both with and without "iommu=nobypass" in
the kernel command line. Verified with "stress-ng -d 4".
Fixes: 6a5c7be5e4 ("powerpc: Override dma_get_required_mask by platform hook and ops")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200908015106.79661-1-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29231826f3 upstream.
The CRC calculation done by genksyms is triggered when the parser hits
EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the
types of the function parameters, and uses that as the input for the CRC
calculation. In the case of forward-declared structs, the type expands
to 'UNKNOWN'. Following this, it appears that the result of the
expansion of each type is cached somewhere, and seems to be re-used
when/if the same type is seen again for another exported symbol in the
same C file.
Unfortunately, this can cause CRC 'stability' issues when a struct
definition becomes visible in the middle of a C file. For example, let's
assume code with the following pattern:
struct foo;
int bar(struct foo *arg)
{
/* Do work ... */
}
EXPORT_SYMBOL_GPL(bar);
/* This contains struct foo's definition */
#include "foo.h"
int baz(struct foo *arg)
{
/* Do more work ... */
}
EXPORT_SYMBOL_GPL(baz);
Here, baz's CRC will be computed using the expansion of struct foo that
was cached after bar's CRC calculation ('UNKOWN' here). But if
EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol
trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded
late, during baz's CRC calculation, which now has visibility over the
full struct definition, hence resulting in a different CRC for baz.
The proper fix for this certainly is in genksyms, but that will take me
some time to get right. In the meantime, we have seen one occurrence of
this in the ehci-hcd code which hits this problem because of the way it
includes C files halfway through the code together with an unlucky mix
of symbol trimming.
In order to workaround this, move the include done in ehci-hub.c early
in ehci-hcd.c, hence making sure the struct definitions are visible to
the entire file. This improves CRC stability of the ehci-hcd exports
even when symbol trimming is enabled.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6186d7fb5 upstream.
Tests showed that under stress conditions the kernel may
temporary fail to allocate 256k with kmalloc. However,
this fix reworks the related code in the cca_findcard2()
function to use kvmalloc instead.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09e43968db upstream.
The x86-64 psABI [0] specifies special relocation types
(R_X86_64_[REX_]GOTPCRELX) for indirection through the Global Offset
Table, semantically equivalent to R_X86_64_GOTPCREL, which the linker
can take advantage of for optimization (relaxation) at link time. This
is supported by LLD and binutils versions 2.26 onwards.
The compressed kernel is position-independent code, however, when using
LLD or binutils versions before 2.27, it must be linked without the -pie
option. In this case, the linker may optimize certain instructions into
a non-position-independent form, by converting foo@GOTPCREL(%rip) to $foo.
This potential issue has been present with LLD and binutils-2.26 for a
long time, but it has never manifested itself before now:
- LLD and binutils-2.26 only relax
movq foo@GOTPCREL(%rip), %reg
to
leaq foo(%rip), %reg
which is still position-independent, rather than
mov $foo, %reg
which is permitted by the psABI when -pie is not enabled.
- GCC happens to only generate GOTPCREL relocations on mov instructions.
- CLang does generate GOTPCREL relocations on non-mov instructions, but
when building the compressed kernel, it uses its integrated assembler
(due to the redefinition of KBUILD_CFLAGS dropping -no-integrated-as),
which has so far defaulted to not generating the GOTPCRELX
relocations.
Nick Desaulniers reports [1,2]:
"A recent change [3] to a default value of configuration variable
(ENABLE_X86_RELAX_RELOCATIONS OFF -> ON) in LLVM now causes Clang's
integrated assembler to emit R_X86_64_GOTPCRELX/R_X86_64_REX_GOTPCRELX
relocations. LLD will relax instructions with these relocations based
on whether the image is being linked as position independent or not.
When not, then LLD will relax these instructions to use absolute
addressing mode (R_RELAX_GOT_PC_NOPIC). This causes kernels built with
Clang and linked with LLD to fail to boot."
Patch series [4] is a solution to allow the compressed kernel to be
linked with -pie unconditionally, but even if merged is unlikely to be
backported. As a simple solution that can be applied to stable as well,
prevent the assembler from generating the relaxed relocation types using
the -mrelax-relocations=no option. For ease of backporting, do this
unconditionally.
[0] https://gitlab.com/x86-psABIs/x86-64-ABI/-/blob/master/x86-64-ABI/linker-optimization.tex#L65
[1] https://lore.kernel.org/lkml/20200807194100.3570838-1-ndesaulniers@google.com/
[2] https://github.com/ClangBuiltLinux/linux/issues/1121
[3] https://reviews.llvm.org/rGc41a18cf61790fc898dcda1055c3efbf442c14c0
[4] https://lore.kernel.org/lkml/20200731202738.2577854-1-nivedita@alum.mit.edu/
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200812004308.1448603-1-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3b33d3c43 upstream.
Variable populated, which is a member of struct pcpu_chunk, is used as a
unit of size of unsigned long.
However, size of populated is miscounted. So, I fix this minor part.
Fixes: 8ab16c43ea ("percpu: change the number of pages marked in the first_chunk pop bitmap")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Sunghyun Jin <mcsmonk@gmail.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66d402e2e9 upstream.
On suspend the original host configuration gets restored. The
resume routine has to undo this, otherwise the SMBus master
may be left in disabled state or in i2c mode.
[JD: Rebased on v5.8, moved the write into i801_setup_hstcfg.]
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 386e15a650 upstream.
Sometimes the embedded controller firmware does not
terminate the list of alternate modes that the partner
supports in its response to the GET_ALTERNATE_MODES command.
Instead the firmware returns the supported alternate modes
over and over again until the driver stops requesting them.
If that happens, the number of modes for each alternate mode
will exceed the maximum 6 that is defined in the USB Power
Delivery specification. Making sure that can't happen by
adding a check for it.
This fixes NULL pointer dereference that is caused by the
overrun.
Fixes: ad74b8649b ("usb: typec: ucsi: Preliminary support for alternate modes")
Cc: stable@vger.kernel.org
Reported-by: Zwane Mwaikambo <zwanem@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200916090034.25119-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6eb158ec0a ]
The driver-specific usage of the DMA_CTRL_ACK flag was replaced with a
custom flag in commit ceeeb99cd8 ("dmaengine: mxs: rename custom flag"),
but i2c-mxs was not updated to use the new flag, completely breaking I2C
transactions using DMA.
Fixes: ceeeb99cd8 ("dmaengine: mxs: rename custom flag")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32f6865c7a ]
Running the eBPF test_verifier leads to random errors looking like this:
[ 6525.735488] Unexpected kernel BRK exception at EL1
[ 6525.735502] Internal error: ptrace BRK handler: f2000100 [#1] SMP
[ 6525.741609] Modules linked in: nls_utf8 cifs libdes libarc4 dns_resolver fscache binfmt_misc nls_ascii nls_cp437 vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul efi_pstore sha2_ce sha256_arm64 sha1_ce evdev efivars efivarfs ip_tables x_tables autofs4 btrfs blake2b_generic xor xor_neon zstd_compress raid6_pq libcrc32c crc32c_generic ahci xhci_pci libahci xhci_hcd igb libata i2c_algo_bit nvme realtek usbcore nvme_core scsi_mod t10_pi netsec mdio_devres of_mdio gpio_keys fixed_phy libphy gpio_mb86s7x
[ 6525.787760] CPU: 3 PID: 7881 Comm: test_verifier Tainted: G W 5.9.0-rc1+ #47
[ 6525.796111] Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Jun 6 2020
[ 6525.804812] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
[ 6525.810390] pc : bpf_prog_c3d01833289b6311_F+0xc8/0x9f4
[ 6525.815613] lr : bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c
[ 6525.820832] sp : ffff8000130cbb80
[ 6525.824141] x29: ffff8000130cbbb0 x28: 0000000000000000
[ 6525.829451] x27: 000005ef6fcbf39b x26: 0000000000000000
[ 6525.834759] x25: ffff8000130cbb80 x24: ffff800011dc7038
[ 6525.840067] x23: ffff8000130cbd00 x22: ffff0008f624d080
[ 6525.845375] x21: 0000000000000001 x20: ffff800011dc7000
[ 6525.850682] x19: 0000000000000000 x18: 0000000000000000
[ 6525.855990] x17: 0000000000000000 x16: 0000000000000000
[ 6525.861298] x15: 0000000000000000 x14: 0000000000000000
[ 6525.866606] x13: 0000000000000000 x12: 0000000000000000
[ 6525.871913] x11: 0000000000000001 x10: ffff8000000a660c
[ 6525.877220] x9 : ffff800010951810 x8 : ffff8000130cbc38
[ 6525.882528] x7 : 0000000000000000 x6 : 0000009864cfa881
[ 6525.887836] x5 : 00ffffffffffffff x4 : 002880ba1a0b3e9f
[ 6525.893144] x3 : 0000000000000018 x2 : ffff8000000a4374
[ 6525.898452] x1 : 000000000000000a x0 : 0000000000000009
[ 6525.903760] Call trace:
[ 6525.906202] bpf_prog_c3d01833289b6311_F+0xc8/0x9f4
[ 6525.911076] bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c
[ 6525.915957] bpf_dispatcher_xdp_func+0x14/0x20
[ 6525.920398] bpf_test_run+0x70/0x1b0
[ 6525.923969] bpf_prog_test_run_xdp+0xec/0x190
[ 6525.928326] __do_sys_bpf+0xc88/0x1b28
[ 6525.932072] __arm64_sys_bpf+0x24/0x30
[ 6525.935820] el0_svc_common.constprop.0+0x70/0x168
[ 6525.940607] do_el0_svc+0x28/0x88
[ 6525.943920] el0_sync_handler+0x88/0x190
[ 6525.947838] el0_sync+0x140/0x180
[ 6525.951154] Code: d4202000 d4202000 d4202000 d4202000 (d4202000)
[ 6525.957249] ---[ end trace cecc3f93b14927e2 ]---
The reason is the offset[] creation and later usage, while building
the eBPF body. The code currently omits the first instruction, since
build_insn() will increase our ctx->idx before saving it.
That was fine up until bounded eBPF loops were introduced. After that
introduction, offset[0] must be the offset of the end of prologue which
is the start of the 1st insn while, offset[n] holds the
offset of the end of n-th insn.
When "taken loop with back jump to 1st insn" test runs, it will
eventually call bpf2a64_offset(-1, 2, ctx). Since negative indexing is
permitted, the current outcome depends on the value stored in
ctx->offset[-1], which has nothing to do with our array.
If the value happens to be 0 the tests will work. If not this error
triggers.
commit 7c2e988f40 ("bpf: fix x64 JIT code generation for jmp to 1st insn")
fixed an indentical bug on x86 when eBPF bounded loops were introduced.
So let's fix it by creating the ctx->offset[] differently. Track the
beginning of instruction and account for the extra instruction while
calculating the arm instruction offsets.
Fixes: 2589726d12 ("bpf: introduce bounded loops")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Jiri Olsa <jolsa@kernel.org>
Co-developed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Co-developed-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200917084925.177348-1-ilias.apalodimas@linaro.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0680a62231 ]
if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64c194c007 ]
mtk_ddp_comp_init() is called in a loop in mtk_drm_probe(), if it
fail, previous successive init component is not proccessed.
Thus uninitialize valid component and put their device if component
init failed.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b959b97860 ]
On A20R machines the interrupt pending bits in cause register need to be
updated by requesting the chipset to do it. This needs to be done to
find the interrupt cause and after interrupt service. In
commit 0b888c7f3a ("MIPS: SNI: Convert to new irq_chip functions") the
function to do after service update got lost, which caused spurious
interrupts.
Fixes: 0b888c7f3a ("MIPS: SNI: Convert to new irq_chip functions")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d26383dcb2 ]
The following leaks were detected by ASAN:
Indirect leak of 360 byte(s) in 9 object(s) allocated from:
#0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
#1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
#2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
#3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
#4 0x560578e07045 in test__pmu tests/pmu.c:155
#5 0x560578de109b in run_test tests/builtin-test.c:410
#6 0x560578de109b in test_and_print tests/builtin-test.c:440
#7 0x560578de401a in __cmd_test tests/builtin-test.c:661
#8 0x560578de401a in cmd_test tests/builtin-test.c:807
#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: cff7f956ec ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b12eea5ad8 ]
The evsel->unit borrows a pointer of pmu event or alias instead of
owns a string. But tool event (duration_time) passes a result of
strdup() caused a leak.
It was found by ASAN during metric test:
Direct leak of 210 byte(s) in 70 object(s) allocated from:
#0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
#1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414
#2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414
#3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
#4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
#5 0x559fbbcc95da in __parse_events util/parse-events.c:2141
#6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406
#7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393
#8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415
#9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498
#10 0x559fbbc0109b in run_test tests/builtin-test.c:410
#11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
#12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
#13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
#14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
#15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
#16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
#17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
#18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308
Fixes: f0fbb114e3 ("perf stat: Implement duration_time as a proper event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 564c836fd9 ]
Commit 930beb5ac0 ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") forgot
to select the correct MIPS_L1_CACHE_SHIFT for SNI RM. This breaks non
coherent DMA because of a wrong allocation alignment.
Fixes: 930beb5ac0 ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a39e8c4d9 ]
When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf
test signal':
Program received signal SIGSEGV, Segmentation fault.
0x0000000000c68548 in __test_function ()
(gdb) bt
#0 0x0000000000c68548 in __test_function ()
#1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61
#2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ...
#3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ...
#4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ...
#5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ...
...
It's caused by the symbol __test_function being in the ".bss" section:
$ readelf -a ./perf | less
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[28] .bss NOBITS 0000000000c356a0 008346a0
00000000000511f8 0000000000000000 WA 0 0 32
$ nm perf | grep __test_function
0000000000c68548 B __test_function
I guess most of the time we're just lucky the inline asm ended up in the
".text" section, so making it specific explicit with push and pop
section clauses.
$ readelf -a ./perf | less
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[13] .text PROGBITS 0000000000431240 00031240
0000000000306faa 0000000000000000 AX 0 0 16
$ nm perf | grep __test_function
00000000004d62c8 T __test_function
Committer testing:
$ readelf -wi ~/bin/perf | grep producer -m1
<c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all
^^^^^
^^^^^
^^^^^
$
Before:
$ perf test signal
20: Breakpoint overflow signal handler : FAILED!
$
After:
$ perf test signal
20: Breakpoint overflow signal handler : Ok
$
Fixes: 8fd34e1cce ("perf test: Improve bp_signal")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20200911130005.1842138-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19873eec7e ]
After we Stop and later Start a VM that uses Accelerated Networking (NIC
SR-IOV), currently the VF vmbus device's Instance GUID can change, so after
vmbus_bus_resume() -> vmbus_request_offers(), vmbus_onoffer() can not find
the original vmbus channel of the VF, and hence we can't complete()
vmbus_connection.ready_for_resume_event in check_ready_for_resume_event(),
and the VM hangs in vmbus_bus_resume() forever.
Fix the issue by adding a timeout, so the resuming can still succeed, and
the saved state is not lost, and according to my test, the user can disable
Accelerated Networking and then will be able to SSH into the VM for
further recovery. Also prevent the VM in question from suspending again.
The host will be fixed so in future the Instance GUID will stay the same
across hibernation.
Fixes: d8bd2d442b ("Drivers: hv: vmbus: Resume after fixing up old primary channels")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200905025555.45614-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c4b205a20 ]
On g12 and following platforms, The first channel of record with more than
2 channels ends being placed randomly on an even channel of the output.
On these SoCs, a bit was added to force the first channel to be placed at
the beginning of the output. Apparently the behavior if the bit is not set
is not easily predictable. According to the documentation, this bit is not
present on the axg series.
Set the bit on g12 and fix the problem.
Fixes: a3c23a8ad4 ("ASoC: meson: axg-toddr: add g12a support")
Reported-by: Nicolas Belin <nbelin@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200828151438.350974-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 103a8542cb ]
If the hypervisor doesn't support hugepages, the kernel ends up allocating a large
number of page table pages. The early page table allocation was wrongly
setting the max memblock limit to ppc64_rma_size with radix translation
which resulted in boot failure as shown below.
Kernel panic - not syncing:
early_alloc_pgtable: Failed to allocate 16777216 bytes align=0x1000000 nid=-1 from=0x0000000000000000 max_addr=0xffffffffffffffff
CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-24.9-default+ #2
Call Trace:
[c0000000016f3d00] [c0000000007c6470] dump_stack+0xc4/0x114 (unreliable)
[c0000000016f3d40] [c00000000014c78c] panic+0x164/0x418
[c0000000016f3dd0] [c000000000098890] early_alloc_pgtable+0xe0/0xec
[c0000000016f3e60] [c0000000010a5440] radix__early_init_mmu+0x360/0x4b4
[c0000000016f3ef0] [c000000001099bac] early_init_mmu+0x1c/0x3c
[c0000000016f3f10] [c00000000109a320] early_setup+0x134/0x170
This was because the kernel was checking for the radix feature before we enable the
feature via mmu_features. This resulted in the kernel using hash restrictions on
radix.
Rework the early init code such that the kernel boot with memblock restrictions
as imposed by hash. At that point, the kernel still hasn't finalized the
translation the kernel will end up using.
We have three different ways of detecting radix.
1. dt_cpu_ftrs_scan -> used only in case of PowerNV
2. ibm,pa-features -> Used when we don't use cpu_dt_ftr_scan
3. CAS -> Where we negotiate with hypervisor about the supported translation.
We look at 1 or 2 early in the boot and after that, we look at the CAS vector to
finalize the translation the kernel will use. We also support a kernel command
line option (disable_radix) to switch to hash.
Update the memblock limit after mmu_early_init_devtree() if the kernel is going
to use radix translation. This forces some of the memblock allocations we do before
mmu_early_init_devtree() to be within the RMA limit.
Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Reported-by: Shirisha Ganta <shiganta@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200828100852.426575-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c27ea23ff ]
On Linux 5.9-rc1 I get the following warning with apq8016-sbc:
WARNING: CPU: 2 PID: 69 at sound/core/init.c:207 snd_card_new+0x36c/0x3b0 [snd]
CPU: 2 PID: 69 Comm: kworker/2:1 Not tainted 5.9.0-rc1 #1
Workqueue: events deferred_probe_work_func
pc : snd_card_new+0x36c/0x3b0 [snd]
lr : snd_card_new+0xf4/0x3b0 [snd]
Call trace:
snd_card_new+0x36c/0x3b0 [snd]
snd_soc_bind_card+0x340/0x9a0 [snd_soc_core]
snd_soc_register_card+0xf4/0x110 [snd_soc_core]
devm_snd_soc_register_card+0x44/0xa0 [snd_soc_core]
apq8016_sbc_platform_probe+0x11c/0x140 [snd_soc_apq8016_sbc]
This warning was introduced in
commit 81033c6b58 ("ALSA: core: Warn on empty module").
It looks like we are supposed to set card->owner to THIS_MODULE.
Fix this for all the qcom ASoC drivers.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 79119c7986 ("ASoC: qcom: Add Storm machine driver")
Fixes: bdb052e81f ("ASoC: qcom: add apq8016 sound card support")
Fixes: a6f933f63f ("ASoC: qcom: apq8096: Add db820c machine driver")
Fixes: 6b1687bf76 ("ASoC: qcom: add sdm845 sound card support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200820154511.203072-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9c006bc78 ]
A new warning in Clang points out that the initialization of
mux_pll_src_4plls_p appears incorrect:
../drivers/clk/rockchip/clk-rk3228.c:140:58: warning: suspicious
concatenation of string literals in an array initialization; did you
mean to separate the elements with a comma? [-Wstring-concatenation]
PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy" "usb480m" };
^
,
../drivers/clk/rockchip/clk-rk3228.c:140:48: note: place parentheses
around the string literal to silence warning
PNAME(mux_pll_src_4plls_p) = { "cpll", "gpll", "hdmiphy" "usb480m" };
^
1 warning generated.
Given the name of the variable and the same variable name in rv1108, it
seems that this should have been four distinct elements. Fix it up by
adding the comma as suggested.
Fixes: 307a2e9ac5 ("clk: rockchip: add clock controller for rk3228")
Link: https://github.com/ClangBuiltLinux/linux/issues/1123
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200810044020.2063350-1-natechancellor@gmail.com
Reviewed-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15e9e35cd1 ]
MIPS defines two kvm types:
#define KVM_VM_MIPS_TE 0
#define KVM_VM_MIPS_VZ 1
In Documentation/virt/kvm/api.rst it is said that "You probably want to
use 0 as machine type", which implies that type 0 be the "automatic" or
"default" type. And, in user-space libvirt use the null-machine (with
type 0) to detect the kvm capability, which returns "KVM not supported"
on a VZ platform.
I try to fix it in QEMU but it is ugly:
https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html
And Thomas Huth suggests me to change the definition of kvm type:
https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html
So I define like this:
#define KVM_VM_MIPS_AUTO 0
#define KVM_VM_MIPS_VZ 1
#define KVM_VM_MIPS_TE 2
Since VZ and TE cannot co-exists, using type 0 on a TE platform will
still return success (so old user-space tools have no problems on new
kernels); the advantage is that using type 0 on a VZ platform will not
return failure. So, the only problem is "new user-space tools use type
2 on old kernels", but if we treat this as a kernel bug, we can backport
this patch to old stable kernels.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1599734031-28746-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b59a7ca154 ]
In the prepare_message callback the bus driver has the
opportunity to split a transfer into smaller chunks.
spi_map_msg is done after prepare_message.
Function spi_res_release releases the splited transfers
in the message. Therefore spi_res_release should be called
after spi_map_msg.
The previous try at this was commit c9ba7a16d0
which released the splited transfers after
spi_finalize_current_message had been called.
This introduced a race since the message struct could be
out of scope because the spi_sync call got completed.
Fixes this leak on spi bus driver spi-bcm2835.c when transfer
size is greater than 65532:
Kmemleak:
sg_alloc_table+0x28/0xc8
spi_map_buf+0xa4/0x300
__spi_pump_messages+0x370/0x748
__spi_sync+0x1d4/0x270
spi_sync+0x34/0x58
spi_test_execute_msg+0x60/0x340 [spi_loopback_test]
spi_test_run_iter+0x548/0x578 [spi_loopback_test]
spi_test_run_test+0x94/0x140 [spi_loopback_test]
spi_test_run_tests+0x150/0x180 [spi_loopback_test]
spi_loopback_test_probe+0x50/0xd0 [spi_loopback_test]
spi_drv_probe+0x84/0xe0
Signed-off-by: Gustav Wiklander <gustavwi@axis.com>
Link: https://lore.kernel.org/r/20200908151129.15915-1-gustav.wiklander@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a355aeb24 ]
If something goes wrong (such as the SCL being stuck low) then we need
to reset the PCA chip. The issue with this is that on reset we lose all
config settings and the chip ends up in a disabled state which results
in a lock up/high CPU usage. We need to re-apply any configuration that
had previously been set and re-enable the chip.
Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20d0a107fb ]
Reading past end of file returns EOF for aligned reads but -EINVAL for
unaligned reads on f2fs. While documentation is not strict about this
corner case, most filesystem returns EOF on this case, like iomap
filesystems. This patch consolidates the behavior for f2fs, by making
it return EOF(0).
it can be verified by a read loop on a file that does a partial read
before EOF (A file that doesn't end at an aligned address). The
following code fails on an unaligned file on f2fs, but not on
btrfs, ext4, and xfs.
while (done < total) {
ssize_t delta = pread(fd, buf + done, total - done, off + done);
if (!delta)
break;
...
}
It is arguable whether filesystems should actually return EOF or
-EINVAL, but since iomap filesystems support it, and so does the
original DIO code, it seems reasonable to consolidate on that.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2cab031ba ]
If the sbi->ckpt->next_free_nid is not NAT block aligned and if there
are free nids in that NAT block between the start of the block and
next_free_nid, then those free nids will not be scanned in scan_nat_page().
This results into mismatch between nm_i->available_nids and the sum of
nm_i->free_nid_count of all NAT blocks scanned. And nm_i->available_nids
will always be greater than the sum of free nids in all the blocks.
Under this condition, if we use all the currently scanned free nids,
then it will loop forever in f2fs_alloc_nid() as nm_i->available_nids
is still not zero but nm_i->free_nid_count of that partially scanned
NAT block is zero.
Fix this to align the nm_i->next_scan_nid to the first nid of the
corresponding NAT block.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8a8a18505 ]
Yang Yang reported the following crash caused by requeueing a flush
request in Kyber:
[ 2.517297] Unable to handle kernel paging request at virtual address ffffffd8071c0b00
...
[ 2.517468] pc : clear_bit+0x18/0x2c
[ 2.517502] lr : sbitmap_queue_clear+0x40/0x228
[ 2.517503] sp : ffffff800832bc60 pstate : 00c00145
...
[ 2.517599] Process ksoftirqd/5 (pid: 51, stack limit = 0xffffff8008328000)
[ 2.517602] Call trace:
[ 2.517606] clear_bit+0x18/0x2c
[ 2.517619] kyber_finish_request+0x74/0x80
[ 2.517627] blk_mq_requeue_request+0x3c/0xc0
[ 2.517637] __scsi_queue_insert+0x11c/0x148
[ 2.517640] scsi_softirq_done+0x114/0x130
[ 2.517643] blk_done_softirq+0x7c/0xb0
[ 2.517651] __do_softirq+0x208/0x3bc
[ 2.517657] run_ksoftirqd+0x34/0x60
[ 2.517663] smpboot_thread_fn+0x1c4/0x2c0
[ 2.517667] kthread+0x110/0x120
[ 2.517669] ret_from_fork+0x10/0x18
This happens because Kyber doesn't track flush requests, so
kyber_finish_request() reads a garbage domain token. Only call the
scheduler's requeue_request() hook if RQF_ELVPRIV is set (like we do for
the finish_request() hook in blk_mq_free_request()). Now that we're
handling it in blk-mq, also remove the check from BFQ.
Reported-by: Yang Yang <yang.yang@vivo.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceb1e0874d ]
Cancel async event work in case async event has been queued up, and
nvme_tcp_submit_async_event() runs after event has been freed.
Signed-off-by: David Milburn <dmilburn@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 925dd04c1f ]
Cancel async event work in case async event has been queued up, and
nvme_rdma_submit_async_event() runs after event has been freed.
Signed-off-by: David Milburn <dmilburn@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e126e8210e ]
Cancel async event work in case async event has been queued up, and
nvme_fc_submit_async_event() runs after event has been freed.
Signed-off-by: David Milburn <dmilburn@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ae90d7640 ]
I found this when compiling a kbuild random config with GCC 11. The
config enables CONFIG_DEBUG_SECTION_MISMATCH, which sets CFLAGS
-fno-inline-functions-called-once. This causes the call to cache_loop in
cache.c to not be inlined causing the below compile error.
In file included from arch/openrisc/mm/cache.c:13:
arch/openrisc/mm/cache.c: In function 'cache_loop':
./arch/openrisc/include/asm/spr.h:16:27: warning: 'asm' operand 0 probably does not match constraints
16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \
| ^~~~~~~
arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr'
25 | mtspr(reg, line);
| ^~~~~
./arch/openrisc/include/asm/spr.h:16:27: error: impossible constraint in 'asm'
16 | #define mtspr(_spr, _val) __asm__ __volatile__ ( \
| ^~~~~~~
arch/openrisc/mm/cache.c:25:3: note: in expansion of macro 'mtspr'
25 | mtspr(reg, line);
| ^~~~~
make[1]: *** [scripts/Makefile.build:283: arch/openrisc/mm/cache.o] Error 1
The asm constraint "K" requires a immediate constant argument to mtspr,
however because of no inlining a register argument is passed causing a
failure. Fix this by using __always_inline.
Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01ec372cef ]
RHBZ: 1871246
If during cifs_lookup()/get_inode_info() we encounter a DFS link
and we use the cifsacl or modefromsid mount options we must suppress
any -EREMOTE errors that triggers or else we will not be able to follow
the DFS link and automount the target.
This fixes an issue with modefromsid/cifsacl where these mountoptions
would break DFS and we would no longer be able to access the share.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2b8610024 ]
Enabling a whole subsystem from a single driver 'select' is frowned
upon and won't be accepted in new drivers, that need to use 'depends on'
instead. Existing selection of DMAENGINES will then cause circular
dependencies. Replace them with a dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c6b6c793e ]
Since p points at raw xdr data, there's no guarantee that it's NULL
terminated, so we should give a length. And probably escape any special
characters too.
Reported-by: Zhi Li <yieli@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 644c9f40cf ]
If a write delegation isn't available, the Linux NFS client uses
a zero-stateid when performing a SETATTR.
NFSv4.0 provides no mechanism for an NFS server to match such a
request to a particular client. It recalls all delegations for that
file, even delegations held by the client issuing the request. If
that client happens to hold a read delegation, the server will
recall it immediately, resulting in an NFS4ERR_DELAY/CB_RECALL/
DELEGRETURN sequence.
Optimize out this pipeline bubble by having the client return any
delegations it may hold on a file before it issues a
SETATTR(zero-stateid) on that file.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 837ba18dfc ]
The "tx/rx-transfer - crossing PAGE_SIZE" test always fails when
len=131071 and rx_offset >= 5:
spi-loopback-test spi0.0: Running test tx/rx-transfer - crossing PAGE_SIZE
...
with iteration values: len = 131071, tx_off = 0, rx_off = 3
with iteration values: len = 131071, tx_off = 0, rx_off = 4
with iteration values: len = 131071, tx_off = 0, rx_off = 5
loopback strangeness - rx changed outside of allowed range at: ...a4321000
spi_msg@ffffffd5a4157690
frame_length: 131071
actual_length: 131071
spi_transfer@ffffffd5a41576f8
len: 131071
tx_buf: ffffffd5a4340ffc
Note that rx_offset > 3 can only occur if the SPI controller driver sets
->dma_alignment to a higher value than 4, so most SPI controller drivers
are not affect.
The allocated Rx buffer is of size SPI_TEST_MAX_SIZE_PLUS, which is 132
KiB (assuming 4 KiB pages). This test uses an initial offset into the
rx_buf of PAGE_SIZE - 4, and a len of 131071, so the range expected to
be written in this transfer ends at (4096 - 4) + 5 + 131071 == 132 KiB,
which is also the end of the allocated buffer. But the code which
verifies the content of the buffer reads a byte beyond the allocated
buffer and spuriously fails because this out-of-bounds read doesn't
return the expected value.
Fix this by using ITERATE_LEN instead of ITERATE_MAX_LEN to avoid
testing sizes which cause out-of-bounds reads.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20200902132341.7079-1-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59ae97a7a9 ]
If the zero duty cycle doesn't correspond to any voltage in the voltage
table, the PWM regulator returns an -EINVAL from get_voltage_sel() which
results in the core erroring out with a "failed to get the current
voltage" and ending up not applying the machine constraints.
Instead, return -ENOTRECOVERABLE which makes the core set the voltage
since it's at an unknown value.
For example, with this device tree:
fooregulator {
compatible = "pwm-regulator";
pwms = <&foopwm 0 100000>;
regulator-min-microvolt = <2250000>;
regulator-max-microvolt = <2250000>;
regulator-name = "fooregulator";
regulator-always-on;
regulator-boot-on;
voltage-table = <2250000 30>;
};
Before this patch:
fooregulator: failed to get the current voltage(-22)
After this patch:
fooregulator: Setting 2250000-2250000uV
fooregulator: 2250 mV
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20200902130952.24880-1-vincent.whitchurch@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b08e89f98 ]
The driver is unable to successfully login with remote device. During pt2pt
login, the driver completes its FLOGI request with the remote device having
WWN precedence. The remote device issues its own (delayed) FLOGI after
accepting the driver's and, upon transmitting the FLOGI, immediately
recognizes it has already processed the driver's FLOGI thus it transitions
to sending a PLOGI before waiting for an ACC to its FLOGI.
In the driver, the FLOGI is received and an ACC sent, followed by the PLOGI
being received and an ACC sent. The issue is that the PLOGI reception
occurs before the response from the adapter from the FLOGI ACC is
received. Processing of the PLOGI sets state flags to perform the REG_RPI
mailbox command and proceed with the rest of discovery on the port. The
same completion routine used by both FLOGI and PLOGI is generic in
nature. One of the things it does is clear flags, and those flags happen to
drive the rest of discovery. So what happened was the PLOGI processing set
the flags, the FLOGI ACC completion cleared them, thus when the PLOGI ACC
completes it doesn't see the flags and stops.
Fix by modifying the generic completion routine to not clear the rest of
discovery flag (NLP_ACC_REGLOGIN) unless the completion is also associated
with performing a mailbox command as part of its handling. For things such
as FLOGI ACC, there isn't a subsequent action to perform with the adapter,
thus there is no mailbox cmd ptr. PLOGI ACC though will perform REG_RPI
upon completion, thus there is a mailbox cmd ptr.
Link: https://lore.kernel.org/r/20200828175332.130300-3-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d7a9520f0 ]
A client should be able to handle getting an ERR_DELAY error
while doing a LOCK call to reclaim state due to delegation being
recalled. This is a transient error that can happen due to server
moving its volumes and invalidating its file location cache and
upon reference to it during the LOCK call needing to do an
expensive lookup (leading to an ERR_DELAY error on a PUTFH).
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4d820543c5 upstream.
When using vf_ops->ndo_select_queue, the number of queues of VF is
usually bigger than the synthetic NIC. This condition may happen
often.
Remove "unlikely" from the comparison of ndev->real_num_tx_queues.
Fixes: b3bf5666a5 ("hv_netvsc: defer queue selection to VF")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eabe861881 upstream.
pskb_carve_frag_list() may return -ENOMEM in pskb_carve_inside_nonlinear().
we should handle this correctly or we would get wrong sk_buff.
Fixes: 6fa01ccd88 ("skbuff: Add pskb_extract() helper function")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ed9ec9b08 upstream.
The driver for Marvell switches puts all ports in IGMP snooping mode
which results in all IGMP/MLD frames that ingress on the ports to be
forwarded to the CPU only.
The bridge code in the kernel can then interpret these frames and act
upon them, for instance by updating the mdb in the switch to reflect
multicast memberships of stations connected to the ports. However,
the IGMP/MLD frames must then also be forwarded to other ports of the
bridge so external IGMP queriers can track membership reports, and
external multicast clients can receive query reports from foreign IGMP
queriers.
Currently, this is impossible as the EDSA tagger sets offload_fwd_mark
on the skb when it unwraps the tagged frames, and that will make the
switchdev layer prevent the skb from egressing on any other port of
the same switch.
To fix that, look at the To_CPU code in the DSA header and make
forwarding of the frame possible for trapped IGMP packets.
Introduce some #defines for the frame types to make the code a bit more
comprehensive.
This was tested on a Marvell 88E6352 variant.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbcc89b630 upstream.
Since transactions may be freed shortly after they're created, before
a log_flush occurs, we need to initialize their ail1 and ail2 lists
earlier. Before this patch, the ail1 list was initialized in gfs2_log_flush().
This moves the initialization to the point when the transaction is first
created.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 40249c6962 ]
Using gcov to collect coverage data for kernels compiled with GCC 10.1
causes random malfunctions and kernel crashes. This is the result of a
changed GCOV_COUNTERS value in GCC 10.1 that causes a mismatch between
the layout of the gcov_info structure created by GCC profiling code and
the related structure used by the kernel.
Fix this by updating the in-kernel GCOV_COUNTERS value. Also re-enable
config GCOV_KERNEL for use with GCC 10.
Reported-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Tested-and-Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cfd54fa83a upstream.
Userspace drivers that use a SetConfiguration() request to "lightweight"
reset an already configured usb device might cause data toggles to get out
of sync between the device and host, and the device becomes unusable.
The xHCI host requires endpoints to be dropped and added back to reset the
toggle. If USB core notices the new configuration is the same as the
current active configuration it will avoid these extra steps by calling
usb_reset_configuration() instead of usb_set_configuration().
A SetConfiguration() request will reset the device side data toggles.
Make sure usb_reset_configuration() function also drops and adds back the
endpoints to ensure data toggles are in sync.
To avoid code duplication split the current usb_disable_device() function
and reuse the endpoint specific part.
Cc: stable <stable@vger.kernel.org>
Tested-by: Martin Thierer <mthierer@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200901082528.12557-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fb884ffe9 upstream.
For the obscure cases where PMD and PUD are the same size
(64kB pages with 42bit VA, for example, which results in only
two levels of page tables), we can't map anything as a PUD,
because there is... erm... no PUD to speak of. Everything is
either a PMD or a PTE.
So let's only try and map a PUD when its size is different from
that of a PMD.
Cc: stable@vger.kernel.org
Fixes: b8e0ba7c8b ("KVM: arm64: Add support for creating PUD hugepages at stage 2")
Reported-by: Gavin Shan <gshan@redhat.com>
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 973c096f6a upstream.
Yunhai Zhang recently fixed a VGA software scrollback bug in commit
ebfdfeeae8 ("vgacon: Fix for missing check in scrollback handling"),
but that then made people look more closely at some of this code, and
there were more problems on the vgacon side, but also the fbcon software
scrollback.
We don't really have anybody who maintains this code - probably because
nobody actually _uses_ it any more. Sure, people still use both VGA and
the framebuffer consoles, but they are no longer the main user
interfaces to the kernel, and haven't been for decades, so these kinds
of extra features end up bitrotting and not really being used.
So rather than try to maintain a likely unused set of code, I'll just
aggressively remove it, and see if anybody even notices. Maybe there
are people who haven't jumped on the whole GUI badnwagon yet, and think
it's just a fad. And maybe those people use the scrollback code.
If that turns out to be the case, we can resurrect this again, once
we've found the sucker^Wmaintainer for it who actually uses it.
Reported-by: NopNop Nop <nopitydays@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: 张云海 <zhangyunhai@nsfocus.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50145474f6 upstream.
This (and the VGA soft scrollback) turns out to have various nasty small
special cases that nobody really is willing to fight. The soft
scrollback code was really useful a few decades ago when you typically
used the console interactively as the main way to interact with the
machine, but that just isn't the case any more.
So it's not worth dragging along.
Tested-by: Yuan Ming <yuanmingbuaa@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60b1af64eb upstream.
'parent' sysfs reads will yield '\0' bytes when the interface name has 15
chars, and there will no "\n" output.
To reproduce, create one interface with 15 chars:
[root@test ~]# ip a s enp0s29u1u7u3c2
2: enp0s29u1u7u3c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether 02:21:28:57:47:17 brd ff:ff:ff:ff:ff:ff
inet6 fe80::ac41:338f:5bcd:c222/64 scope link noprefixroute
valid_lft forever preferred_lft forever
[root@test ~]# modprobe rdma_rxe
[root@test ~]# echo enp0s29u1u7u3c2 > /sys/module/rdma_rxe/parameters/add
[root@test ~]# cat /sys/class/infiniband/rxe0/parent
enp0s29u1u7u3c2[root@test ~]#
[root@test ~]# f="/sys/class/infiniband/rxe0/parent"
[root@test ~]# echo "$(<"$f")"
-bash: warning: command substitution: ignored null byte in input
enp0s29u1u7u3c2
Use scnprintf and PAGE_SIZE to fill the sysfs output buffer.
Cc: stable@vger.kernel.org
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200820153646.31316-1-yi.zhang@redhat.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f44d04e696 upstream.
It turns out that currently we rely only on sysfs attribute
permissions:
$ ll /sys/bus/rbd/{add*,remove*}
--w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add
--w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add_single_major
--w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/remove
--w------- 1 root root 4096 Sep 3 20:38 /sys/bus/rbd/remove_single_major
This means that images can be mapped and unmapped (i.e. block devices
can be created and deleted) by a UID 0 process even after it drops all
privileges or by any process with CAP_DAC_OVERRIDE in its user namespace
as long as UID 0 is mapped into that user namespace.
Be consistent with other virtual block devices (loop, nbd, dm, md, etc)
and require CAP_SYS_ADMIN in the initial user namespace for mapping and
unmapping, and also for dumping the configuration string and refreshing
the image header.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0c393e210 upstream.
SDHCI changed from using a tasklet to finish requests, to using an IRQ
thread i.e. commit c07a48c265 ("mmc: sdhci: Remove finish_tasklet").
Because this increased the latency to complete requests, a preparatory
change was made to complete the request from the IRQ handler if
possible i.e. commit 19d2f695f4 ("mmc: sdhci: Call mmc_request_done()
from IRQ handler if possible"). That alleviated the situation for MMC
block devices because the MMC block driver makes use of mmc_pre_req()
and mmc_post_req() so that successful requests are completed in the IRQ
handler and any DMA unmapping is handled separately in mmc_post_req().
However SDIO was still affected, and an example has been reported with
up to 20% degradation in performance.
Looking at SDIO I/O helper functions, sdio_io_rw_ext_helper() appeared
to be a possible candidate for making use of asynchronous requests
within its I/O loops, but analysis revealed that these loops almost
never iterate more than once, so the complexity of the change would not
be warrented.
Instead, mmc_pre_req() and mmc_post_req() are added before and after I/O
submission (mmc_wait_for_req) in mmc_io_rw_extended(). This still has
the potential benefit of reducing the duration of interrupt handlers, as
well as addressing the latency issue for SDHCI. It also seems a more
reasonable solution than forcing drivers to do everything in the IRQ
handler.
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: c07a48c265 ("mmc: sdhci: Remove finish_tasklet")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200903082007.18715-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f71800228d upstream.
The TVE200 will occasionally print a bunch of lost interrupts
and similar dmesg messages, sometimes during boot and sometimes
after disabling and coming back to enablement. This is probably
because the hardware is left in an unknown state by the boot
loader that displays a logo.
This can be fixed by bringing the controller into a known state
by resetting the controller while enabling it. We retry reset 5
times like the vendor driver does. We also put the controller
into reset before de-clocking it and clear all interrupts before
enabling the vblank IRQ.
This makes the video enable/disable/enable cycle rock solid
on the D-Link DIR-685. Tested extensively.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed43ffea78 upstream.
The iSCSI target login thread might get stuck with the following stack:
cat /proc/`pidof iscsi_np`/stack
[<0>] down_interruptible+0x42/0x50
[<0>] iscsit_access_np+0xe3/0x167
[<0>] iscsi_target_locate_portal+0x695/0x8ac
[<0>] __iscsi_target_login_thread+0x855/0xb82
[<0>] iscsi_target_login_thread+0x2f/0x5a
[<0>] kthread+0xfa/0x130
[<0>] ret_from_fork+0x1f/0x30
This can be reproduced via the following steps:
1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing
PDU exchange in the login thread and before the negotiation is finished
the the network link goes down. At this point A has not finished login
and tpg->np_login_sem is held.
2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing
PDU exchange in the login thread the target expects to process remaining
login PDUs in workqueue context.
3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new
socket. A' will wait for tpg->np_login_sem with np->np_login_timer
loaded to wait for at most 15 seconds. The lock is held by A so A'
eventually times out.
4. Before A' got timeout initiator B gets negotiation failed and calls
iscsi_target_login_drop()->iscsi_target_login_sess_out(). The
np->np_login_timer is canceled and initiator A' will hang forever.
Because A' is now in the login thread, no new login requests can be
serviced.
Fix this by moving iscsi_stop_login_thread_timer() out of
iscsi_target_login_sess_out(). Also remove iscsi_np parameter from
iscsi_target_login_sess_out().
Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com
Cc: stable@vger.kernel.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a7416f947 upstream.
The recent commit 7d8196641e ("regulator: Remove pointer table
overallocation") changed the size of coupled_rdevs and now KASAN is able
to detect slab-out-of-bounds problem in regulator_unlock_recursive(),
which is a legit problem caused by a typo in the code. The recursive
unlock function uses n_coupled value of a parent regulator for unlocking
supply regulator, while supply's n_coupled should be used. In practice
problem may only affect platforms that use coupled regulators.
Cc: stable@vger.kernel.org # 5.0+
Fixes: f8702f9e4a ("regulator: core: Use ww_mutex for regulators locking")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200831204335.19489-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87fe29b61f upstream.
Move all allocations outside of the regulator_lock()ed section.
======================================================
WARNING: possible circular locking dependency detected
5.7.13+ #535 Not tainted
------------------------------------------------------
f2fs_discard-179:7/702 is trying to acquire lock:
c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0
but task is already holding lock:
cb95b080 (&dcc->cmd_lock){+.+.}-{3:3}, at: __issue_discard_cmd+0xec/0x5f8
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
[...]
-> #3 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire.part.11+0x40/0x50
fs_reclaim_acquire+0x24/0x28
__kmalloc_track_caller+0x54/0x218
kstrdup+0x40/0x5c
create_regulator+0xf4/0x368
regulator_resolve_supply+0x1a0/0x200
regulator_register+0x9c8/0x163c
[...]
other info that might help us debug this:
Chain exists of:
regulator_list_mutex --> &sit_i->sentry_lock --> &dcc->cmd_lock
[...]
Fixes: f8702f9e4a ("regulator: core: Use ww_mutex for regulators locking")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/6eebc99b2474f4ffaa0405b15178ece0e7e4f608.1597195321.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73a32129f8 upstream.
Allocating memory with regulator_list_mutex held makes lockdep unhappy
when memory pressure makes the system do fs_reclaim on eg. eMMC using
a regulator. Push the lock inside regulator_init_coupling() after the
allocation.
======================================================
WARNING: possible circular locking dependency detected
5.7.13+ #533 Not tainted
------------------------------------------------------
kswapd0/383 is trying to acquire lock:
cca78ca4 (&sbi->write_io[i][j].io_rwsem){++++}-{3:3}, at: __submit_merged_write_cond+0x104/0x154
but task is already holding lock:
c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire.part.11+0x40/0x50
fs_reclaim_acquire+0x24/0x28
__kmalloc+0x54/0x218
regulator_register+0x860/0x1584
dummy_regulator_probe+0x60/0xa8
[...]
other info that might help us debug this:
Chain exists of:
&sbi->write_io[i][j].io_rwsem --> regulator_list_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(regulator_list_mutex);
lock(fs_reclaim);
lock(&sbi->write_io[i][j].io_rwsem);
*** DEADLOCK ***
1 lock held by kswapd0/383:
#0: c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50
[...]
Fixes: d8ca7d184b ("regulator: core: Introduce API for regulators coupling customization")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1a889cf7f61c6429c9e6b34ddcdde99be77a26b6.1597195321.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c78544eaa upstream.
When faulting in the pages for the user supplied buffer for the search
ioctl, we are passing only the base address of the buffer to the function
fault_in_pages_writeable(). This means that after the first iteration of
the while loop that searches for leaves, when we have a non-zero offset,
stored in 'sk_offset', we try to fault in a wrong page range.
So fix this by adding the offset in 'sk_offset' to the base address of the
user supplied buffer when calling fault_in_pages_writeable().
Several users have reported that the applications compsize and bees have
started to operate incorrectly since commit a48b73eca4 ("btrfs: fix
potential deadlock in the search ioctl") was added to stable trees, and
these applications make heavy use of the search ioctls. This fixes their
issues.
Link: https://lore.kernel.org/linux-btrfs/632b888d-a3c3-b085-cdf5-f9bb61017d92@lechevalier.se/
Link: https://github.com/kilobyte/compsize/issues/34
Fixes: a48b73eca4 ("btrfs: fix potential deadlock in the search ioctl")
CC: stable@vger.kernel.org # 4.4+
Tested-by: A L <mail@lechevalier.se>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fccc0007b8 upstream.
Nikolay reported a lockdep splat in generic/476 that I could reproduce
with btrfs/187.
======================================================
WARNING: possible circular locking dependency detected
5.9.0-rc2+ #1 Tainted: G W
------------------------------------------------------
kswapd0/100 is trying to acquire lock:
ffff9e8ef38b6268 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x330
but task is already holding lock:
ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x65/0x80
slab_pre_alloc_hook.constprop.0+0x20/0x200
kmem_cache_alloc_trace+0x3a/0x1a0
btrfs_alloc_device+0x43/0x210
add_missing_dev+0x20/0x90
read_one_chunk+0x301/0x430
btrfs_read_sys_array+0x17b/0x1b0
open_ctree+0xa62/0x1896
btrfs_mount_root.cold+0x12/0xea
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x10d/0x379
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
path_mount+0x434/0xc00
__x64_sys_mount+0xe3/0x120
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__mutex_lock+0x7e/0x7e0
btrfs_chunk_alloc+0x125/0x3a0
find_free_extent+0xdf6/0x1210
btrfs_reserve_extent+0xb3/0x1b0
btrfs_alloc_tree_block+0xb0/0x310
alloc_tree_block_no_bg_flush+0x4a/0x60
__btrfs_cow_block+0x11a/0x530
btrfs_cow_block+0x104/0x220
btrfs_search_slot+0x52e/0x9d0
btrfs_lookup_inode+0x2a/0x8f
__btrfs_update_delayed_inode+0x80/0x240
btrfs_commit_inode_delayed_inode+0x119/0x120
btrfs_evict_inode+0x357/0x500
evict+0xcf/0x1f0
vfs_rmdir.part.0+0x149/0x160
do_rmdir+0x136/0x1a0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&delayed_node->mutex){+.+.}-{3:3}:
__lock_acquire+0x1184/0x1fa0
lock_acquire+0xa4/0x3d0
__mutex_lock+0x7e/0x7e0
__btrfs_release_delayed_node.part.0+0x3f/0x330
btrfs_evict_inode+0x24c/0x500
evict+0xcf/0x1f0
dispose_list+0x48/0x70
prune_icache_sb+0x44/0x50
super_cache_scan+0x161/0x1e0
do_shrink_slab+0x178/0x3c0
shrink_slab+0x17c/0x290
shrink_node+0x2b2/0x6d0
balance_pgdat+0x30a/0x670
kswapd+0x213/0x4c0
kthread+0x138/0x160
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Chain exists of:
&delayed_node->mutex --> &fs_info->chunk_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&fs_info->chunk_mutex);
lock(fs_reclaim);
lock(&delayed_node->mutex);
*** DEADLOCK ***
3 locks held by kswapd0/100:
#0: ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
#1: ffffffffa9d65c50 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x115/0x290
#2: ffff9e8e9da260e0 (&type->s_umount_key#48){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0
stack backtrace:
CPU: 1 PID: 100 Comm: kswapd0 Tainted: G W 5.9.0-rc2+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x92/0xc8
check_noncircular+0x12d/0x150
__lock_acquire+0x1184/0x1fa0
lock_acquire+0xa4/0x3d0
? __btrfs_release_delayed_node.part.0+0x3f/0x330
__mutex_lock+0x7e/0x7e0
? __btrfs_release_delayed_node.part.0+0x3f/0x330
? __btrfs_release_delayed_node.part.0+0x3f/0x330
? lock_acquire+0xa4/0x3d0
? btrfs_evict_inode+0x11e/0x500
? find_held_lock+0x2b/0x80
__btrfs_release_delayed_node.part.0+0x3f/0x330
btrfs_evict_inode+0x24c/0x500
evict+0xcf/0x1f0
dispose_list+0x48/0x70
prune_icache_sb+0x44/0x50
super_cache_scan+0x161/0x1e0
do_shrink_slab+0x178/0x3c0
shrink_slab+0x17c/0x290
shrink_node+0x2b2/0x6d0
balance_pgdat+0x30a/0x670
kswapd+0x213/0x4c0
? _raw_spin_unlock_irqrestore+0x46/0x60
? add_wait_queue_exclusive+0x70/0x70
? balance_pgdat+0x670/0x670
kthread+0x138/0x160
? kthread_create_worker_on_cpu+0x40/0x40
ret_from_fork+0x1f/0x30
This is because we are holding the chunk_mutex when we call
btrfs_alloc_device, which does a GFP_KERNEL allocation. We don't want
to switch that to a GFP_NOFS lock because this is the only place where
it matters. So instead use memalloc_nofs_save() around the allocation
in order to avoid the lockdep splat.
Reported-by: Nikolay Borisov <nborisov@suse.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea57788eb7 upstream.
[BUG]
A completely sane converted fs will cause kernel warning at balance
time:
[ 1557.188633] BTRFS info (device sda7): relocating block group 8162107392 flags data
[ 1563.358078] BTRFS info (device sda7): found 11722 extents
[ 1563.358277] BTRFS info (device sda7): leaf 7989321728 gen 95 total ptrs 213 free space 3458 owner 2
[ 1563.358280] item 0 key (7984947200 169 0) itemoff 16250 itemsize 33
[ 1563.358281] extent refs 1 gen 90 flags 2
[ 1563.358282] ref#0: tree block backref root 4
[ 1563.358285] item 1 key (7985602560 169 0) itemoff 16217 itemsize 33
[ 1563.358286] extent refs 1 gen 93 flags 258
[ 1563.358287] ref#0: shared block backref parent 7985602560
[ 1563.358288] (parent 7985602560 is NOT ALIGNED to nodesize 16384)
[ 1563.358290] item 2 key (7985635328 169 0) itemoff 16184 itemsize 33
...
[ 1563.358995] BTRFS error (device sda7): eb 7989321728 invalid extent inline ref type 182
[ 1563.358996] ------------[ cut here ]------------
[ 1563.359005] WARNING: CPU: 14 PID: 2930 at 0xffffffff9f231766
Then with transaction abort, and obviously failed to balance the fs.
[CAUSE]
That mentioned inline ref type 182 is completely sane, it's
BTRFS_SHARED_BLOCK_REF_KEY, it's some extra check making kernel to
believe it's invalid.
Commit 64ecdb647d ("Btrfs: add one more sanity check for shared ref
type") introduced extra checks for backref type.
One of the requirement is, parent bytenr must be aligned to node size,
which is not correct.
One example is like this:
0 1G 1G+4K 2G 2G+4K
| |///////////////////|//| <- A chunk starts at 1G+4K
| | <- A tree block get reserved at bytenr 1G+4K
Then we have a valid tree block at bytenr 1G+4K, but not aligned to
nodesize (16K).
Such chunk is not ideal, but current kernel can handle it pretty well.
We may warn about such tree block in the future, but should not reject
them.
[FIX]
Change the alignment requirement from node size alignment to sector size
alignment.
Also, to make our lives a little easier, also output @iref when
btrfs_get_extent_inline_ref_type() failed, so we can locate the item
easier.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205475
Fixes: 64ecdb647d ("Btrfs: add one more sanity check for shared ref type")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ update comments and messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89226a296d upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte u8 array on the stack. As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here. We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
The additional forcing of the 8 byte alignment of the timestamp
is not strictly necessary but makes the code less fragile by
making this explicit.
Fixes: c7eeea93ac ("iio: Add Freescale MMA8452Q 3-axis accelerometer driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e5ac1f220 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte u8 array on the stack As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here. We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
The force alignment of ts is not strictly necessary in this particularly
case but does make the code less fragile.
Fixes: a84ef0d181 ("iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95ad67577d upstream.
iio_push_to_buffers_with_timestamp assumes 8 byte alignment which
is not guaranteed by an array of smaller elements.
Note that whilst in this particular case the alignment forcing
of the ts element is not strictly necessary it acts as good
documentation. Doing this where not necessary should cut
down on the number of cut and paste introduced errors elsewhere.
Fixes: 0427a106a9 ("iio: accel: kxsd9: Add triggered buffer handling")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb1a148ef4 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
The explicit alignment of ts is necessary to ensure consistent
padding for x86_32 in which the ts would otherwise be 4 byte aligned.
Fixes: 283d26917a ("iio: chemical: ccs811: Add triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 523628852a upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv().
This data is allocated with kzalloc so no data can leak appart
from previous readings.
It is necessary to force the alignment of ts to avoid the padding
on x86_32 being different from 64 bit platorms (it alows for
4 bytes aligned 8 byte types.
Fixes: 06ad7ea10e ("max44000: Initial triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02ad21cefb upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc so no data can leak apart from
previous readings.
The explicit alignment of ts is not necessary in this case as by
coincidence the padding will end up the same, however I consider
it to make the code less fragile and have included it.
Fixes: bc11ca4a0b ("iio:magnetometer:ak8975: triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54f82df2ba upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv().
This data is allocated with kzalloc so no data can leak apart
from previous readings.
The eplicit alignment of ts is necessary to ensure correct padding
on x86_32 where s64 is only aligned to 4 bytes.
Fixes: 08e05d1fce ("ti-adc081c: Initial triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db8f06d97e upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc so no data can leak apart
from previous readings.
The explicit alignment of ts is necessary to ensure correct padding
on architectures where s64 is only 4 bytes aligned such as x86_32.
Fixes: a9e9c7153e ("iio: adc: add max1117/max1118/max1119 ADC driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8cd222feb upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 32 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak apart from previous readings. The explicit alignment
isn't technically needed here, but it reduced fragility and avoids
cut and paste into drivers where it will be needed.
If we want this in older stables will need manual backport due to
driver reworks.
Fixes: c43a102e67 ("iio: ina2xx: add support for TI INA2xx Power Monitors")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a661b571e3 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv().
This data is allocated with kzalloc so no data can leak apart from
previous readings.
The force alignment of ts is not strictly necessary in this case
but reduces the fragility of the code.
Fixes: 3691e5a694 ("iio: adc: add driver for the ti-adc084s021 chip")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mårten Lindahl <martenli@axis.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6f86f7243 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by moving
to a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
Fixes tag is beyond some major refactoring so likely manual backporting
would be needed to get that far back.
Whilst the force alignment of the ts is not strictly necessary, it
does make the code less fragile.
Fixes: 3bbec97733 ("iio: bmc150_accel: add support for hardware fifo")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f60e8bb842 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte s16 array on the stack As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here. We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
In this case the forced alignment of the ts is necessary to ensure
correct padding on x86_32 where the s64 would only be 4 byte aligned.
Fixes: 16b0526153 ("mb1232.c: add distance iio sensor with i2c")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2684d50034 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
Here we use a structure on the stack. The driver already did an
explicit memset so no data leak was possible.
Forced alignment of ts is not strictly necessary but probably makes
the code slightly less fragile.
Note there has been some rework in this driver of the years, so no
way this will apply cleanly all the way back.
Fixes: 2690be9051 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 336306790b upstream.
BMI160 Minimium gyroscope frequency in normal mode is 25Hz.
When older EC firmware do not report their sensors frequencies,
use 25Hz as the minimum for gyroscope to be sure it works on BMI160.
Fixes: ae7b02ad2f ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e71e6dbe96 upstream.
To stop conversion ads1015_set_power_state() function call unimplemented
function __pm_runtime_suspend() from pm_runtime_put_autosuspend()
if CONFIG_PM is not set.
In case of CONFIG_PM is not set: __pm_runtime_suspend() returns -ENOSYS,
so ads1015_read_raw() failed because ads1015_set_power_state() returns an
error.
If CONFIG_PM is disabled, there is no need to start/stop conversion.
Fix it by adding return 0 function variant if CONFIG_PM is not set.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Fixes: ecc24e72f4 ("iio: adc: Add TI ADS1015 ADC driver support")
Tested-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d98299885c ]
On my R9 390, the voltage was reported as a constant 1000 mV.
This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor()
function, where some magic constants were used in a condition,
to determine whether the voltage should be read from PLANE2_VID
or PLANE1_VID. The VDDC mask was incorrectly used, instead of
the VDDGFX mask.
This patch changes the code to use the correct defined constants
(and apply the correct bitshift), thus resulting in correct voltage reporting.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13774d81f3 ]
In snd_hdac_device_init pm_runtime_set_active is called to
increase child_count in parent device. But when it is failed
to build connection with GPU for one case that integrated
graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be
invoked to clean up a HD-audio extended codec base device. At
this time the child_count of parent is not decreased, which
makes parent device can't get suspended.
This patch calls pm_runtime_set_suspended to decrease child_count
in parent device in snd_hdac_device_exit to match with
snd_hdac_device_init. pm_runtime_set_suspended can make sure that
it will not decrease child_count if the device is already suspended.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200902154218.1440441-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0328feda7 ]
In the arm64 module linker script, the section .text.ftrace_trampoline
is specified unconditionally regardless of whether CONFIG_DYNAMIC_FTRACE
is enabled (this is simply due to the limitation that module linker
scripts are not preprocessed like the vmlinux one).
Normally, for .plt and .text.ftrace_trampoline, the section flags
present in the module binary wouldn't matter since module_frob_arch_sections()
would assign them manually anyway. However, the arm64 module loader only
sets the section flags for .text.ftrace_trampoline when CONFIG_DYNAMIC_FTRACE=y.
That's only become problematic recently due to a recent change in
binutils-2.35, where the .text.ftrace_trampoline section (along with the
.plt section) is now marked writable and executable (WAX).
We no longer allow writable and executable sections to be loaded due to
commit 5c3a7db0c7 ("module: Harden STRICT_MODULE_RWX"), so this is
causing all modules linked with binutils-2.35 to be rejected under arm64.
Drop the IS_ENABLED(CONFIG_DYNAMIC_FTRACE) check in module_frob_arch_sections()
so that the section flags for .text.ftrace_trampoline get properly set to
SHF_EXECINSTR|SHF_ALLOC, without SHF_WRITE.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: http://lore.kernel.org/r/20200831094651.GA16385@linux-8ccs
Link: https://lore.kernel.org/r/20200901160016.3646-1-jeyu@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eacc9c5a92 ]
This fixes the behavior of the scaling_max_freq and scaling_min_freq
sysfs files in systems which had turbo disabled by the BIOS.
Caleb noticed that the HWP is programmed to operate in the wrong
P-state range on his system when the CPUFREQ policy min/max frequency
is set via sysfs. This seems to be because in his system
intel_pstate_get_hwp_max() is returning the maximum turbo P-state even
though turbo was disabled by the BIOS, which causes intel_pstate to
scale kHz frequencies incorrectly e.g. setting the maximum turbo
frequency whenever the maximum guaranteed frequency is requested via
sysfs.
Tested-by: Caleb Callaway <caleb.callaway@intel.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Minor subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43298db300 ]
After commit f6ebbcf08f ("cpufreq: intel_pstate: Implement passive
mode with HWP enabled") it is possible to change the driver status
to "off" via sysfs with HWP enabled, which effectively causes the
driver to unregister itself, but HWP remains active and it forces the
minimum performance, so even if another cpufreq driver is loaded,
it will not be able to control the CPU frequency.
For this reason, make the driver refuse to change the status to
"off" with HWP enabled.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26907eb605 ]
HSDK board has Micrel KSZ9031, recent commit
bcf3440c6d ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
caused a breakdown of Ethernet.
Using 'phy-mode = "rgmii"' is not correct because accodring RGMII
specification it is necessary to have delay on RX (PHY to MAX)
which is not generated in case of "rgmii".
Using "rgmii-id" adds necessary delay and solves the issue.
Also adding name of PHY placed on HSDK board.
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7429ea53d ]
When input_mt_init_slots() fails, input should be freed
to prevent memleak. When input_register_device() fails,
we should call input_mt_destroy_slots() to free memory
allocated by input_mt_init_slots().
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a545ebe38 ]
This driver didn't set hard_header_len. This patch sets hard_header_len
for it according to its header_ops->create function.
This driver's header_ops->create function (cisco_hard_header) creates
a header of (struct hdlc_header), so hard_header_len should be set to
sizeof(struct hdlc_header).
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 724a419ea2 ]
When operating in XInput mode, the 8bitdo SN30 Pro+ requires the same
quirk as the official Xbox One Bluetooth controllers for rumble to
function.
Other controllers like the N30 Pro 2, SF30 Pro, SN30 Pro, etc. probably
also need this quirk, but I do not have the hardware to test.
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77df710ba6 ]
The Saitek X52 family of joysticks has a pair of axes that were
originally (by the Windows driver) used as mouse pointer controls. The
corresponding usage page is the Game Controls page, which is not
recognized by the generic HID driver, and therefore, both axes get
mapped to ABS_MISC. The quirk makes the second axis get mapped to
ABS_MISC+1, and therefore made available separately.
One Saitek X52 device is already fixed. This patch fixes the other two
known devices with VID/PID 06a3:0255 and 06a3:0762.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2362acb678 ]
If the controller becomes unresponsive in the middle of a reset, we
will hang because we are waiting for the freeze to complete, but that
cannot happen since we have commands that are inflight holding the
q_usage_counter, and we can't blindly fail requests that times out.
So give a timeout and if we cannot wait for queue freeze before
unfreezing, fail and have the error handling take care how to
proceed (either schedule a reconnect of remove the controller).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0475a8dcbc ]
When a request times out in a LIVE state, we simply trigger error
recovery and let the error recovery handle the request cancellation,
however when a request times out in a non LIVE state, we make sure to
complete it immediately as it might block controller setup or teardown
and prevent forward progress.
However tearing down the entire set of I/O and admin queues causes
freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really
an overkill to what we actually need, which is to just fence controller
teardown that may be running, stop the queue, and cancel the request if
it is not already completed.
Now that we have the controller teardown_lock, we can safely serialize
request cancellation. This addresses a hang caused by calling extra
queue freeze on controller namespaces, causing unfreeze to not complete
correctly.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5110f40241 ]
In the timeout handler we may need to complete a request because the
request that timed out may be an I/O that is a part of a serial sequence
of controller teardown or initialization. In order to complete the
request, we need to fence any other context that may compete with us
and complete the request that is timing out.
In this case, we could have a potential double completion in case
a hard-irq or a different competing context triggered error recovery
and is running inflight request cancellation concurrently with the
timeout handler.
Protect using a ctrl teardown_lock to serialize contexts that may
complete a cancelled request due to error recovery or a reset.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5c01f4f7f ]
If the controller becomes unresponsive in the middle of a reset, we will
hang because we are waiting for the freeze to complete, but that cannot
happen since we have commands that are inflight holding the
q_usage_counter, and we can't blindly fail requests that times out.
So give a timeout and if we cannot wait for queue freeze before
unfreezing, fail and have the error handling take care how to proceed
(either schedule a reconnect of remove the controller).
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 236187c4ed ]
When a request times out in a LIVE state, we simply trigger error
recovery and let the error recovery handle the request cancellation,
however when a request times out in a non LIVE state, we make sure to
complete it immediately as it might block controller setup or teardown
and prevent forward progress.
However tearing down the entire set of I/O and admin queues causes
freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really
an overkill to what we actually need, which is to just fence controller
teardown that may be running, stop the queue, and cancel the request if
it is not already completed.
Now that we have the controller teardown_lock, we can safely serialize
request cancellation. This addresses a hang caused by calling extra
queue freeze on controller namespaces, causing unfreeze to not complete
correctly.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4d61470ae ]
In the timeout handler we may need to complete a request because the
request that timed out may be an I/O that is a part of a serial sequence
of controller teardown or initialization. In order to complete the
request, we need to fence any other context that may compete with us
and complete the request that is timing out.
In this case, we could have a potential double completion in case
a hard-irq or a different competing context triggered error recovery
and is running inflight request cancellation concurrently with the
timeout handler.
Protect using a ctrl teardown_lock to serialize contexts that may
complete a cancelled request due to error recovery or a reset.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cf0d7c0f3 ]
Users can detect if the wait has completed or not and take appropriate
actions based on this information (e.g. weather to continue
initialization or rather fail and schedule another initialization
attempt).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7144f5c4c ]
NVME_CTRL_NEW should never see any I/O, because in order to start
initialization it has to transition to NVME_CTRL_CONNECTING and from
there it will never return to this state.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6ce7d7b4a ]
When handling commands without in-capsule data, we assign the ttag
assuming we already have the queue commands array allocated (based
on the queue size information in the connect data payload). However
if the connect itself did not send the connect data in-capsule we
have yet to allocate the queue commands,and we will assign a bogus
ttag and suffer a NULL dereference when we receive the corresponding
h2cdata pdu.
Fix this by checking if we already allocated commands before
dereferencing it when handling h2cdata, if we didn't, its for sure a
connect and we should use the preallocated connect command.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89d29997f1 ]
eznps driver is supposed to be platform independent however it ends up
including stuff from inside arch/arc headers leading to rand config
build errors.
The quick hack to fix this (proper fix is too much chrun for non active
user-base) is to add following to nps platform agnostic header.
- copy AUX_IENABLE from arch/arc header
- move CTOP_AUX_IACK from arch/arc/plat-eznps/*/**
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91244d1084 ]
Set the skb's network_header before it is passed to the underlying
Ethernet device for transmission.
This patch fixes the following issue:
When we use this driver with AF_PACKET sockets, there would be error
messages of:
protocol 0805 is buggy, dev (Ethernet interface name)
printed in the system "dmesg" log.
This is because skbs passed down to the Ethernet device for transmission
don't have their network_header properly set, and the dev_queue_xmit_nit
function in net/core/dev.c complains about this.
Reason of setting the network_header to this place (at the end of the
Ethernet header, and at the beginning of the Ethernet payload):
Because when this driver receives an skb from the Ethernet device, the
network_header is also set at this place.
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 657f101930 ]
The inode chunk allocation transaction reserves inobt_maxlevels-1
blocks to accommodate a full split of the inode btree. A full split
requires an allocation for every existing level and a new root
block, which means inobt_maxlevels is the worst case block
requirement for a transaction that inserts to the inobt. This can
lead to a transaction block reservation overrun when tmpfile
creation allocates an inode chunk and expands the inobt to its
maximum depth. This problem has been observed in conjunction with
overlayfs, which makes frequent use of tmpfiles internally.
The existing reservation code goes back as far as the Linux git repo
history (v2.6.12). It was likely never observed as a problem because
the traditional file/directory creation transactions also include
worst case block reservation for directory modifications, which most
likely is able to make up for a single block deficiency in the inode
allocation portion of the calculation. tmpfile support is relatively
more recent (v3.15), less heavily used, and only includes the inode
allocation block reservation as tmpfiles aren't linked into the
directory tree on creation.
Fix up the inode alloc block reservation macro and a couple of the
block allocator minleft parameters that enforce an allocation to
leave enough free blocks in the AG for a full inobt split.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a156998fc9 ]
when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL
and it is udp packet, which has a dest port as the IANA assigned.
the hardware is expected to do the checksum offload, but the
hardware will not do the checksum offload when udp dest port is
6081.
This patch fixes it by doing the checksum in software.
Reported-by: Li Bing <libing@winhong.com>
Signed-off-by: Yi Li <yili@winhong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 216116eae4 ]
The Tegra HDA codec HW implementation has an issue related to not
swapping the 2 channel Audio Sample Packet(ASP) channel mapping.
Whatever the FL and FR mapping specified the left channel always
comes out of left speaker and right channel on right speaker. So
add condition to disallow the swapping of FL,FR during the playback.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20200825052415.20626-2-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f97c04c316 ]
When down_killable() fails, skb_resp should be freed
just like when st95hf_spi_send() fails.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ee39c1448 ]
The underlying Ethernet device may request necessary tailroom to be
allocated by setting needed_tailroom. This driver should also set
needed_tailroom to request the tailroom needed by the underlying
Ethernet device to be allocated.
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc5453a5b7 ]
If an sctp connection gets re-used, heartbeats are flagged as invalid
because their vtag doesn't match.
Handle this in a similar way as TCP conntrack when it suspects that the
endpoints and conntrack are out-of-sync.
When a HEARTBEAT request fails its vtag validation, flag this in the
conntrack state and accept the packet.
When a HEARTBEAT_ACK is received with an invalid vtag in the reverse
direction after we allowed such a HEARTBEAT through, assume we are
out-of-sync and re-set the vtag info.
v2: remove left-over snippet from an older incarnation that moved
new_state/old_state assignments, thats not needed so keep that
as-is.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe81d927b7 ]
Newer version of HSDK aka HSDK-4xD (with dual issue HS48x4 CPU) wired up
the perf interrupt, so enable that in DT.
This is OK for old HSDK where this irq is ignored because pct irq is not
wired up in hardware.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 686e0a0c8c ]
The string was incorrectly defined before from least to most specific,
swap the compatible strings accordingly.
Fixes: ff73917d38 ("ARM64: dts: Add QSPI Device Tree node for NS2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b793dab8d8 ]
The string was incorrectly defined before from least to most
specific, swap the compatible strings accordingly.
Fixes: 1c8f406507 ("ARM: dts: BCM5301X: convert to iProc QSPI")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1ecc40a95 ]
The string was incorrectly defined before from least to most
specific, swap the compatible strings accordingly.
Fixes: 329f98c197 ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d663186293 ]
The string was incorrectly defined before from least to most specific,
swap the compatible strings accordingly.
Fixes: b9099ec754 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b089c1ef7 ]
Currently we allocate rx buffers in a single contiguous buffers for
headers (iser and iscsi) and data trailer. This means that most likely the
data starting offset is aligned to 76 bytes (size of both headers).
This worked fine for years, but at some point this broke, resulting in
data corruptions in isert when a command comes with immediate data and the
underlying backend device assumes 512 bytes buffer alignment.
We assume a hard-requirement for all direct I/O buffers to be 512 bytes
aligned. To fix this, we should avoid passing unaligned buffers for I/O.
Instead, we allocate our recv buffers with some extra space such that we
can have the data portion align to 512 byte boundary. This also means that
we cannot reference headers or data using structure but rather
accessors (as they may move based on alignment). Also, get rid of the
wrong __packed annotation from iser_rx_desc as this has only harmful
effects (not aligned to anything).
This affects the rx descriptors for iscsi login and data plane.
Fixes: 3d75ca0ade ("block: introduce multi-page bvec helpers")
Link: https://lore.kernel.org/r/20200904195039.31687-1-sagi@grimberg.me
Reported-by: Stephen Rust <srust@blockbridge.com>
Tested-by: Doug Dumitru <doug@dumitru.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cd896a5e8 ]
If we hit the UINT_MAX limit of bio->bi_iter.bi_size and so we are anyway
not merging this page in this bio, then it make sense to make same_page
also as false before returning.
Without this patch, we hit below WARNING in iomap.
This mostly happens with very large memory system and / or after tweaking
vm dirty threshold params to delay writeback of dirty data.
WARNING: CPU: 18 PID: 5130 at fs/iomap/buffered-io.c:74 iomap_page_release+0x120/0x150
CPU: 18 PID: 5130 Comm: fio Kdump: loaded Tainted: G W 5.8.0-rc3 #6
Call Trace:
__remove_mapping+0x154/0x320 (unreliable)
iomap_releasepage+0x80/0x180
try_to_release_page+0x94/0xe0
invalidate_inode_page+0xc8/0x110
invalidate_mapping_pages+0x1dc/0x540
generic_fadvise+0x3c8/0x450
xfs_file_fadvise+0x2c/0xe0 [xfs]
vfs_fadvise+0x3c/0x60
ksys_fadvise64_64+0x68/0xe0
sys_fadvise64+0x28/0x40
system_call_exception+0xf8/0x1c0
system_call_common+0xf0/0x278
Fixes: cc90bc6842 ("block: fix "check bi_size overflow before merge"")
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73a5379937 ]
Right now we are failing requests based on the controller state (which
is checked inline in nvmf_check_ready) however we should definitely
accept requests if the queue is live.
When entering controller reset, we transition the controller into
NVME_CTRL_RESETTING, and then return BLK_STS_RESOURCE for non-mpath
requests (have blk_noretry_request set).
This is also the case for NVME_REQ_USER for the wrong reason. There
shouldn't be any reason for us to reject this I/O in a controller reset.
We do want to prevent passthru commands on the admin queue because we
need the controller to fully initialize first before we let user passthru
admin commands to be issued.
In a non-mpath setup, this means that the requests will simply be
requeued over and over forever not allowing the q_usage_counter to drop
its final reference, causing controller reset to hang if running
concurrently with heavy I/O.
Fixes: 35897b920c ("nvme-fabrics: fix and refine state checks in __nvmf_check_ready")
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea8be08cc9 ]
The 'spi_stm32 44004000.spi: Communication suspended' message means that
when using PIO, the kernel did not read the FIFO fast enough and so the
SPI controller paused the transfer. Currently, this is printed on every
single such event, so if the kernel is busy and the controller is pausing
the transfers often, the kernel will be all the more busy scrolling this
message into the log buffer every few milliseconds. That is not helpful.
Instead, rate-limit the message and print it every once in a while. It is
not possible to use the default dev_warn_ratelimited(), because that is
still too verbose, as it prints 10 lines (DEFAULT_RATELIMIT_BURST) every
5 seconds (DEFAULT_RATELIMIT_INTERVAL). The policy here is to print 1 line
every 50 seconds (DEFAULT_RATELIMIT_INTERVAL * 10), because 1 line is more
than enough and the cycles saved on printing are better left to the CPU to
handle the SPI. However, dev_warn_once() is also not useful, as the user
should be aware that this condition is possibly recurring or ongoing. Thus
the custom rate-limit policy.
Finally, turn the message from dev_warn() to dev_dbg(), since the system
does not suffer any sort of malfunction if this message appears, it is
just slowing down. This further reduces the printing into the log buffer
and frees the CPU to do useful work.
Fixes: dcbe0d84df ("spi: add driver for STM32 SPI controller")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Amelie Delaunay <amelie.delaunay@st.com>
Cc: Antonio Borneo <borneo.antonio@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200905151913.117775-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d5dcefb7b ]
As the comments in this patch say, if we tune and find all phases are
valid it's _almost_ as bad as no phases being found valid. Probably
all phases are not really reliable but we didn't detect where the
unreliable place is. That means we'll essentially be guessing and
hoping we get a good phase.
This is not just a problem in theory. It was causing real problems on
a real board. On that board, most often phase 10 is found as the only
invalid phase, though sometimes 10 and 11 are invalid and sometimes
just 11. Some percentage of the time, however, all phases are found
to be valid. When this happens, the current logic will decide to use
phase 11. Since phase 11 is sometimes found to be invalid, this is a
bad choice. Sure enough, when phase 11 is picked we often get mmc
errors later in boot.
I have seen cases where all phases were found to be valid 3 times in a
row, so increase the retry count to 10 just to be extra sure.
Fixes: 415b5a75da ("mmc: sdhci-msm: Add platform_execute_tuning implementation")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200827075809.1.If179abf5ecb67c963494db79c3bc4247d987419b@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cf9bfe9be ]
The commit 61d7437ed1 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040")
broke resume for eMMC HS400. When the system suspends the eMMC controller
is powered down. So, on resume we need to reinitialize the controller.
Although, amd_sdhci_host was not getting cleared, so the DLL was never
re-enabled on resume. This results in HS400 being non-functional.
To fix the problem, this change clears the tuned_clock flag, clears the
dll_enabled flag and disables the DLL on reset.
Fixes: 61d7437ed1 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200831150517.1.I93c78bfc6575771bb653c9d3fca5eb018a08417d@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fbbf2148a ]
clang static analysis flags this problem
stream.c:844:9: warning: Use of memory after
it is freed
kfree(bus->defer_msg.msg->buf);
^~~~~~~~~~~~~~~~~~~~~~~
This happens in an error handler cleaning up memory
allocated for elements in a list.
list_for_each_entry(m_rt, &stream->master_list, stream_node) {
bus = m_rt->bus;
kfree(bus->defer_msg.msg->buf);
kfree(bus->defer_msg.msg);
}
And is triggered when the call to sdw_bank_switch() fails.
There are a two problems.
First, when sdw_bank_switch() fails, though it frees memory it
does not clear bus's reference 'defer_msg.msg' to that memory.
The second problem is the freeing msg->buf. In some cases
msg will be NULL so this will dereference a null pointer.
Need to check before freeing.
Fixes: 99b8a5d608 ("soundwire: Add bank switch routine")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200902202650.14189-1-trix@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28b0865714 ]
When the returned speed from __ethtool_get_link_ksettings() is
SPEED_UNKNOWN this will lead to reporting a wrong speed and width for
providers that uses ib_get_eth_speed(), fix that by defaulting the
netdev_speed to SPEED_1000 in case the returned value from
__ethtool_get_link_ksettings() is SPEED_UNKNOWN.
Fixes: d41861942f ("IB/core: Add generic function to extract IB speed from netdev")
Link: https://lore.kernel.org/r/20200902124304.170912-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53de092f47 ]
It was discovered that sdparm will fail when attempting to disable write
cache on a SATA disk connected via libsas.
In the ATA command set the write cache state is controlled through the SET
FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and
the latter command is what is used in the SCSI-ATA translation layer. A
subtle difference is that a MODE SELECT carries data whereas SET FEATURES
is defined as a non-data command in ATA.
Set the DMA data direction to DMA_NONE if the requested ATA command is
identified as non-data.
[mkp: commit desc]
Fixes: fa1c1e8f1e ("[SCSI] Add SATA support to libsas")
Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.com
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f2f98f270 ]
"interrupt" is not a valid property. Using proper name fixes dtbs_check
warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dt.yaml: tmu@30260000: 'interrupts' is a required property
Fixes: e464fd2ba4 ("arm64: dts: imx8mq: enable the multi sensor TMU")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81dbbb417d ]
According to the Reference Manual, the correct size is 512 MiB.
Without this fix, probing the QSPI fails:
fsl-quadspi 1550000.spi: ioremap failed for resource
[mem 0x40000000-0x7fffffff]
fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed
fsl-quadspi: probe of 1550000.spi failed with error -12
Fixes: 85f8ee78ab ("ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c1e4f7e9e ]
The following 4 tests in timers can take longer than the default 45
seconds that added in commit 852c8cbf34 ("selftests/kselftest/runner.sh:
Add 45 second timeout per test") to run:
* nsleep-lat - 2m7.350s
* set-timer-lat - 2m0.66s
* inconsistency-check - 1m45.074s
* raw_skew - 2m0.013s
Thus they will be marked as failed with the current 45s setting:
not ok 3 selftests: timers: nsleep-lat # TIMEOUT
not ok 4 selftests: timers: set-timer-lat # TIMEOUT
not ok 6 selftests: timers: inconsistency-check # TIMEOUT
not ok 7 selftests: timers: raw_skew # TIMEOUT
Disable the timeout setting for timers can make these tests finish
properly:
ok 3 selftests: timers: nsleep-lat
ok 4 selftests: timers: set-timer-lat
ok 6 selftests: timers: inconsistency-check
ok 7 selftests: timers: raw_skew
https://bugs.launchpad.net/bugs/1864626
Fixes: 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 467bf30142 ]
Move another allocation out of regulator_list_mutex-protected region, as
reclaim might want to take the same lock.
WARNING: possible circular locking dependency detected
5.7.13+ #534 Not tainted
------------------------------------------------------
kswapd0/383 is trying to acquire lock:
c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0
but task is already holding lock:
c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire.part.11+0x40/0x50
fs_reclaim_acquire+0x24/0x28
kmem_cache_alloc_trace+0x40/0x1e8
regulator_register+0x384/0x1630
devm_regulator_register+0x50/0x84
reg_fixed_voltage_probe+0x248/0x35c
[...]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(regulator_list_mutex);
lock(fs_reclaim);
lock(regulator_list_mutex);
*** DEADLOCK ***
[...]
2 locks held by kswapd0/383:
#0: c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50
#1: cb70e5e0 (hctx->srcu){....}-{0:0}, at: hctx_lock+0x60/0xb8
[...]
Fixes: 541d052d72 ("regulator: core: Only support passing enable GPIO descriptors")
[this commit only changes context]
Fixes: f8702f9e4a ("regulator: core: Use ww_mutex for regulators locking")
[this is when the regulator_list_mutex was introduced in reclaim locking path]
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/41fe6a9670335721b48e8f5195038c3d67a3bf92.1597195321.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1db7b80a6 ]
A previous commit removed the panel-dpi driver, which made the
SOM-LV video stop working because it relied on the DPI driver
for setting video timings. Now that the simple-panel driver is
available in omap2plus, this patch migrates the SOM-LV dev kits
to use a similar panel and remove the manual timing requirements.
A similar patch was already done and applied to the Torpedo family.
Fixes: 8bf4b16211 ("drm/omap: Remove panel-dpi driver")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d26e9a028 ]
Older versions of U-Boot would pinmux the whole board, but as
the bootloader got updated, it started to only pinmux the pins
it needed, and expected Linux to configure what it needed.
Unfortunately this caused an issue with the audio, because the
mcbsp2 pins were configured in the device tree but never
referenced by the driver. When U-Boot stopped muxing the audio
pins, the audio died.
This patch adds the references to the associate the pin controller
with the mcbsp2 driver which makes audio operate again.
Fixes: 5cb8b0fa55 ("ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7dfee6768 ]
Older versions of U-Boot would pinmux the whole board, but as
the bootloader got updated, it started to only pinmux the pins
it needed, and expected Linux to configure what it needed.
Unfortunately this caused an issue with the audio, because the
mcbsp2 pins were configured in the device tree, they were never
referenced by the driver. When U-Boot stopped muxing the audio
pins, the audio died.
This patch adds the references to the associate the pin controller
with the mcbsp2 driver which makes audio operate again.
Fixes: 739f85bba5 ("ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96e97bc07e ]
napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent
netpoll from accessing rings before init is complete. However, the
same is not done for fresh napi instances in netif_napi_add(),
even though we expect NAPI instances to be added as disabled.
This causes crashes during driver reconfiguration (enabling XDP,
changing the channel count) - if there is any printk() after
netif_napi_add() but before napi_enable().
To ensure memory ordering is correct we need to use RCU accessors.
Reported-by: Rob Sherwood <rsher@fb.com>
Fixes: 2d8bff1269 ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2a63866c8b ]
syzbot is reporting hung task at nbd_ioctl() [1], for there are two
problems regarding TIPC's connectionless socket's shutdown() operation.
----------
#include <fcntl.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/nbd.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
const int fd = open("/dev/nbd0", 3);
alarm(5);
ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0));
ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */
return 0;
}
----------
One problem is that wait_for_completion() from flush_workqueue() from
nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when
nbd_start_device_ioctl() received a signal at wait_event_interruptible(),
for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from
nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl()
is failing to wake up a WQ thread sleeping at wait_woken() from
tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from
nbd_read_stat() from recv_work() scheduled by nbd_start_device() from
nbd_start_device_ioctl(). Fix this problem by always invoking
sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is
called.
The other problem is that tipc_wait_for_rcvmsg() cannot return when
tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to
SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg()
needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this
problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown()
does) when the socket is connectionless.
[1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2
Reported-by: syzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 09e31cf0c5 ]
Since commit 9c66d15646 ("taprio: Add support for hardware
offloading") there's a bit of inconsistency when offloading schedules
to the hardware:
In software mode, the gate masks are specified in terms of traffic
classes, so if say "sched-entry S 03 20000", it means that the traffic
classes 0 and 1 are open for 20us; when taprio is offloaded to
hardware, the gate masks are specified in terms of hardware queues.
The idea here is to fix hardware offloading, so schedules in hardware
and software mode have the same behavior. What's needed to do is to
map traffic classes to queues when applying the offload to the driver.
Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3106ecb43a ]
With disabling bh in the whole sctp_get_port_local(), when
snum == 0 and too many ports have been used, the do-while
loop will take the cpu for a long time and cause cpu stuck:
[ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s!
[ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940
[ ] Call Trace:
[ ] _raw_spin_lock+0xc1/0xd0
[ ] sctp_get_port_local+0x527/0x650 [sctp]
[ ] sctp_do_bind+0x208/0x5e0 [sctp]
[ ] sctp_autobind+0x165/0x1e0 [sctp]
[ ] sctp_connect_new_asoc+0x355/0x480 [sctp]
[ ] __sctp_connect+0x360/0xb10 [sctp]
There's no need to disable bh in the whole function of
sctp_get_port_local. So fix this cpu stuck by removing
local_bh_disable() called at the beginning, and using
spin_lock_bh() instead.
The same thing was actually done for inet_csk_get_port() in
Commit ea8add2b19 ("tcp/dccp: better use of ephemeral
ports in bind()").
Thanks to Marcelo for pointing the buggy code out.
v1->v2:
- use cond_resched() to yield cpu to other tasks if needed,
as Eric noticed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d3b990b7f3 ]
This patch fixes two main problems seen when removing NetLabel
mappings: memory leaks and potentially extra audit noise.
The memory leaks are caused by not properly free'ing the mapping's
address selector struct when free'ing the entire entry as well as
not properly cleaning up a temporary mapping entry when adding new
address selectors to an existing entry. This patch fixes both these
problems such that kmemleak reports no NetLabel associated leaks
after running the SELinux test suite.
The potentially extra audit noise was caused by the auditing code in
netlbl_domhsh_remove_entry() being called regardless of the entry's
validity. If another thread had already marked the entry as invalid,
but not removed/free'd it from the list of mappings, then it was
possible that an additional mapping removal audit record would be
generated. This patch fixes this by returning early from the removal
function when the entry was previously marked invalid. This change
also had the side benefit of improving the code by decreasing the
indentation level of large chunk of code by one (accounting for most
of the diffstat).
Fixes: 63c4168874 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping")
Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 05d4487197 ]
Cited commit added the possible value of '2', but it cannot be set. Fix
it by adjusting the maximum value to '2'. This is consistent with the
corresponding IPv4 sysctl.
Before:
# sysctl -w net.ipv6.fib_multipath_hash_policy=2
sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 0
After:
# sysctl -w net.ipv6.fib_multipath_hash_policy=2
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 2
Fixes: d8f74f0975 ("ipv6: Support multipath hashing on inner IP pkts")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Composite is an alternative to HDMI/DPI/DSI on Pi4 as it
requires very particular clock setups.
Add an option to vc4-kms-v3d-pi4 to enable composite and
disable all other graphics outputs.
NB This must be used in conjunction with enable_tvout=1
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
The include file bcm283x-rpi-i2c0mux_0_XX.dtsi was setting
pinctrl-0 on i2c0mux, as were the individual platform DT files.
Remove this duplication and rely on the include file.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
The i2c0 overlay was assigning pinctrl settings to node i2c0,
which is now the port@0 output of the mux. That leaves a high
chance of it colliding with the port@1 output and not doing
what was intended.
Set the i2c0 overlay to disable i2c0mux, set the pin-ctrl on
the root i2c controller, and redirect the alias, so overall it
behaves exactly as before.
Combining with dtparam=i2c_vc=on is going to cause conflicts,
so this is noted in the README.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
commit a092b7233f upstream.
The buffer size is 2 Bytes and we expect to receive the same amount of
data. But sometimes we receive less data and run into uninit-was-stored
issue upon read. Hence modify the error check on the return value to match
with the buffer size as a prevention.
Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com
Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17743798d8 upstream.
There is a race between the assignment of `table->data` and write value
to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on
the other thread.
CPU0: CPU1:
proc_sys_write
hugetlb_sysctl_handler proc_sys_call_handler
hugetlb_sysctl_handler_common hugetlb_sysctl_handler
table->data = &tmp; hugetlb_sysctl_handler_common
table->data = &tmp;
proc_doulongvec_minmax
do_proc_doulongvec_minmax sysctl_head_finish
__do_proc_doulongvec_minmax unuse_table
i = table->data;
*i = val; // corrupt CPU1's stack
Fix this by duplicating the `table`, and only update the duplicate of
it. And introduce a helper of proc_hugetlb_doulongvec_minmax() to
simplify the code.
The following oops was seen:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
Code: Bad RIP value.
...
Call Trace:
? set_max_huge_pages+0x3da/0x4f0
? alloc_pool_huge_page+0x150/0x150
? proc_doulongvec_minmax+0x46/0x60
? hugetlb_sysctl_handler_common+0x1c7/0x200
? nr_hugepages_store+0x20/0x20
? copy_fd_bitmaps+0x170/0x170
? hugetlb_sysctl_handler+0x1e/0x20
? proc_sys_call_handler+0x2f1/0x300
? unregister_sysctl_table+0xb0/0xb0
? __fd_install+0x78/0x100
? proc_sys_write+0x14/0x20
? __vfs_write+0x4d/0x90
? vfs_write+0xef/0x240
? ksys_write+0xc0/0x160
? __ia32_sys_read+0x50/0x50
? __close_fd+0x129/0x150
? __x64_sys_write+0x43/0x50
? do_syscall_64+0x6c/0x200
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: e5ff215941 ("hugetlb: multiple hstates for multiple page sizes")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13e45417ce upstream.
The usage of "capture group (...)" in the immediate condition after `&&`
results in `$1` being uninitialized. This issues a warning "Use of
uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl
line 2638".
I noticed this bug while running checkpatch on the set of commits from
v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in
their commit message.
This bug was introduced in the script by commit e518e9a59e
("checkpatch: emit an error when there's a diff in a changelog"). It
has been in the script since then.
The author intended to store the match made by capture group in variable
`$1`. This should have contained the name of the file as `[\w/]+`
matched. However, this couldn't be accomplished due to usage of capture
group and `$1` in the same regular expression.
Fix this by placing the capture group in the condition before `&&`.
Thus, `$1` can be initialized to the text that capture group matches
thereby setting it to the desired and required value.
Fixes: e518e9a59e ("checkpatch: emit an error when there's a diff in a changelog")
Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8048822bac upstream.
commit b5a84ecf02 ("mmc: tegra: Add Tegra210 support")
Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra
SDMMC hawdware for data timeout to achive better timeout than using
SDCLK and using TMCLK is recommended.
USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register
SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or
SDCLK for data timeout.
Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used
for data timeout by Tegra SDMMC hardware and having TMCLK not enabled
is not recommended.
So, this patch adds quirk NVQUIRK_HAS_TMCLK for SoC having separate
timeout clock and keeps TMCLK enabled all the time.
Fixes: b5a84ecf02 ("mmc: tegra: Add Tegra210 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-8-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebfa440ce3 upstream.
SR-IOV VFs do not implement the memory enable bit of the command
register, therefore this bit is not set in config space after
pci_enable_device(). This leads to an unintended difference
between PF and VF in hand-off state to the user. We can correct
this by setting the initial value of the memory enable bit in our
virtualized config space. There's really no need however to
ever fault a user on a VF though as this would only indicate an
error in the user's management of the enable bit, versus a PF
where the same access could trigger hardware faults.
Fixes: abafbc551f ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a653b205f upstream.
The following error ocurred when testing disk online/offline:
[ 301.798344] device-mapper: thin: 253:5: aborting current metadata transaction
[ 301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction
[ 301.849206] Aborting journal on device dm-26-8.
[ 301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted
[ 301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30
[ 301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data]
Reason is:
metadata_operation_failed
abort_transaction
dm_pool_abort_metadata
__create_persistent_data_objects
r = __open_or_format_metadata
if (r) --> If failed will free pmd->bm but pmd->bm not set NULL
dm_block_manager_destroy(pmd->bm);
set_pool_mode
dm_pool_metadata_read_only(pool->pmd);
dm_bm_set_read_only(pmd->bm); --> use-after-free
Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and
dm_bm_set_read_write functions. If bm is NULL it means creating the
bm failed and so dm_bm_is_read_only must return true.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7785a9e4c2 upstream.
Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto
wait structures declared on stack before their use with
crypto_wait_req().
Fixes: 39d13a1ac4 ("dm crypt: reuse eboiv skcipher for IV generation")
Fixes: bbb1658461 ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e27fec66f0 upstream.
The dm-integrity target did not report errors in bitmap mode just after
creation. The reason is that the function integrity_recalc didn't clean up
ic->recalc_bitmap as it proceeded with recalculation.
Fix this by updating the bitmap accordingly -- the double shift serves
to rounddown.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 468dfca38b ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c322ee9320 upstream.
Commit 935fcc56ab ("dm mpath: only flush workqueue when needed")
changed flush_multipath_work() to avoid needless workqueue
flushing (of a multipath global workqueue). But that change didn't
realize the surrounding flush_multipath_work() code should also only
run if 'pg_init_in_progress' is set.
Fix this by only doing all of flush_multipath_work()'s PG init related
work if 'pg_init_in_progress' is set.
Otherwise multipath_wait_for_pg_init_completion() will run
unconditionally but the preceeding flush_workqueue(kmpath_handlerd)
may not. This could lead to deadlock (though only if kmpath_handlerd
never runs a corresponding work to decrement 'pg_init_in_progress').
It could also be, though highly unlikely, that the kmpath_handlerd
work that does PG init completes before 'pg_init_in_progress' is set,
and then an intervening DM table reload's multipath_postsuspend()
triggers flush_multipath_work().
Fixes: 935fcc56ab ("dm mpath: only flush workqueue when needed")
Cc: stable@vger.kernel.org
Reported-by: Ben Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9e040efcc upstream.
The function dax_direct_access doesn't take partitions into account,
it always maps pages from the beginning of the device. Therefore,
persistent_memory_claim() must get the partition offset using
get_start_sect() and add it to the page offsets passed to
dax_direct_access().
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 48debafe4f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5aeac7c4b1 upstream.
ioc_pd_free() grabs irq-safe ioc->lock without ensuring that irq is disabled
when it can be called with irq disabled or enabled. This has a small chance
of causing A-A deadlocks and triggers lockdep splats. Use irqsave operations
instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b5455636f upstream.
All three generations of Sandisk SSDs lock up hard intermittently.
Experiments showed that disabling NCQ lowered the failure rate significantly
and the kernel has been disabling NCQ for some models of SD7's and 8's,
which is obviously undesirable.
Karthik worked with Sandisk to root cause the hard lockups to trim commands
larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which
limits max trim size to 128M and applies it to all three generations of
Sandisk SSDs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Karthik Shivaram <karthikgs@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de1b0ee490 upstream.
If a driver leaves the limit settings as the defaults, then we don't
initialize bdi->io_pages. This means that file systems may need to
work around bdi->io_pages == 0, which is somewhat messy.
Initialize the default value just like we do for ->ra_pages.
Cc: stable@vger.kernel.org
Fixes: 9491ae4aad ("mm: don't cap request size based on read-ahead setting")
Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3a84a8d0d upstream.
The basic permission bits (protection bits in AmigaOS) have been broken
in Linux' AFFS - it would only set bits, but never delete them.
Also, contrary to the documentation, the Archived bit was not handled.
Let's fix this for good, and set the bits such that Linux and classic
AmigaOS can coexist in the most peaceful manner.
Also, update the documentation to represent the current state of things.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2e2d73fa2 upstream.
Device drivers do not expect to have change_protocol or wakeup
re-programming to be accesed after rc_unregister_device(). This can
cause the device driver to access deallocated resources.
Cc: <stable@vger.kernel.org> # 4.16+
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df57d73276 upstream.
For Intel controllers, SDHCI_RESET_ALL resets also CQHCI registers.
Normally, SDHCI_RESET_ALL is not used while CQHCI is enabled, but that can
happen on the error path. e.g. if mmc_cqe_recovery() fails, mmc_blk_reset()
is called which, for a eMMC that does not support HW Reset, will cycle the
bus power and the driver will perform SDHCI_RESET_ALL.
So whenever performing SDHCI_RESET_ALL ensure CQHCI is deactivated.
That will force the driver to reinitialize CQHCI when it is next used.
A similar change was done already for sdhci-msm, and other drivers using
CQHCI might benefit from a similar change, if they also have CQHCI reset
by SDHCI_RESET_ALL.
Fixes: 8ee82bda23 ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Cc: stable@vger.kernel.org # 5.4.x: 0ffa6cfbd9: mmc: cqhci: Add cqhci_deactivate()
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200819121848.16967-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 855d388df2 upstream.
This patch fixs eMMC-Access on mt7622/Bpi-64.
Before we got these Errors on mounting eMMC ion R64:
[ 48.664925] blk_update_request: I/O error, dev mmcblk0, sector 204800 op 0x1:(WRITE)
flags 0x800 phys_seg 1 prio class 0
[ 48.676019] Buffer I/O error on dev mmcblk0p1, logical block 0, lost sync page write
This patch adds a optional reset management for msdc.
Sometimes the bootloader does not bring msdc register
to default state, so need reset the msdc controller.
Cc: <stable@vger.kernel.org> # v5.4+
Fixes: 966580ad23 ("mmc: mediatek: add support for MT7622 SoC")
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20200814014346.6496-4-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a6660d049 upstream.
There've been quite a few regression reports about the lowered volume
(reduced to ca 65% from the previous level) on Lenovo Thinkpad X1
after the commit d2cd795c4e ("ALSA: hda - fixup for the bass speaker
on Lenovo Carbon X1 7th gen"). Although the commit itself does the
right thing from HD-audio POV in order to have a volume control for
bass speakers, it seems that the machine has some secret recipe under
the hood.
Through experiments, Benjamin Poirier found out that the following
routing gives the best result:
* DAC1 (NID 0x02) -> Speaker pin (NID 0x14)
* DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) &
Headphone pin (0x21)
* DAC3 (NID 0x06) -> Unused
DAC1 seems to have some equalizer internally applied, and you'd get
again the output in a bad quality if you connect this to the
headphone pin. Hence the headphone is connected to DAC2, which is now
shared with the bass speaker pin. DAC3 has no volume amp, hence it's
not connected at all.
For achieving the routing above, this patch introduced a couple of
workarounds:
* The connection list of bass speaker pin (NID 0x17) is reduced not to
include DAC3 (NID 0x06)
* Pass preferred_pairs array to specify the fixed connection
Here, both workarounds are needed because the generic parser prefers
the individual DAC assignment over others.
When the routing above is applied, the generic parser creates the two
volume controls "Front" and "Bass Speaker". Since we have only two
DACs for three output pins, those are not fully controlling each
output individually, and it would confuse PulseAudio. For avoiding
the pitfall, in this patch, we rename those volume controls to some
unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and
concentrate only on the still good-working "Master" volume control.
If a user still wants to control each DAC volume, they can still
change manually via "DAC1" and "DAC2" volume controls.
Fixes: d2cd795c4e ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276
Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com
Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bd8bce897 upstream.
Tascam FE-8 is known to support communication by asynchronous transaction
only. The support can be implemented in userspace application and
snd-firewire-ctl-services project has the support. However, ALSA
firewire-tascam driver is bound to the model.
This commit changes device entries so that the model is excluded. In a
commit 53b3ffee78 ("ALSA: firewire-tascam: change device probing
processing"), I addressed to the concern that version field in
configuration differs depending on installed firmware. However, as long
as I checked, the version number is fixed. It's safe to return version
number back to modalias.
Fixes: 53b3ffee78 ("ALSA: firewire-tascam: change device probing processing")
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200823075537.56255-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 858e0ad930 upstream.
When system is suspended with active audio playback to HDMI/DP, two
alternative sequences can happen at resume:
a) monitor is detected first and ALSA prepare follows normal
stream setup sequence, or
b) ALSA prepare is called first, but monitor is not yet detected,
so PCM is restarted without a pin,
In case of (b), on i915 systems, haswell_verify_D0() is not called at
resume and the pin power state may be incorrect. Result is lack of audio
after resume with no error reported back to user-space.
Fix the problem by always verifying converter and pin state in the
i915_pin_cvt_fixup().
BugLink: https://github.com/thesofproject/linux/issues/2388
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200826170306.701566-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eed8f88b10 upstream.
This reverts commit 61eee4a7fc ("ALSA: hda: Add support for Loongson
7A1000 controller") to fix the following error on the Loongson LS7A
platform:
rcu: INFO: rcu_preempt self-detected stall on CPU
<SNIP>
NMI backtrace for cpu 0
CPU: 0 PID: 68 Comm: kworker/0:2 Not tainted 5.8.0+ #3
Hardware name: , BIOS
Workqueue: events azx_probe_work [snd_hda_intel]
<SNIP>
Call Trace:
[<ffffffff80211a64>] show_stack+0x9c/0x130
[<ffffffff8065a740>] dump_stack+0xb0/0xf0
[<ffffffff80665774>] nmi_cpu_backtrace+0x134/0x140
[<ffffffff80665910>] nmi_trigger_cpumask_backtrace+0x190/0x200
[<ffffffff802b1abc>] rcu_dump_cpu_stacks+0x12c/0x190
[<ffffffff802b08cc>] rcu_sched_clock_irq+0xa2c/0xfc8
[<ffffffff802b91d4>] update_process_times+0x2c/0xb8
[<ffffffff802cad80>] tick_sched_timer+0x40/0xb8
[<ffffffff802ba5f0>] __hrtimer_run_queues+0x118/0x1d0
[<ffffffff802bab74>] hrtimer_interrupt+0x12c/0x2d8
[<ffffffff8021547c>] c0_compare_interrupt+0x74/0xa0
[<ffffffff80296bd0>] __handle_irq_event_percpu+0xa8/0x198
[<ffffffff80296cf0>] handle_irq_event_percpu+0x30/0x90
[<ffffffff8029d958>] handle_percpu_irq+0x88/0xb8
[<ffffffff80296124>] generic_handle_irq+0x44/0x60
[<ffffffff80b3cfd0>] do_IRQ+0x18/0x28
[<ffffffff8067ace4>] plat_irq_dispatch+0x64/0x100
[<ffffffff80209a20>] handle_int+0x140/0x14c
[<ffffffff802402e8>] irq_exit+0xf8/0x100
Because AZX_DRIVER_GENERIC can not work well for Loongson LS7A HDA
controller, it needs some workarounds which are not merged into the
upstream kernel at this time, so it should revert this patch now.
Fixes: 61eee4a7fc ("ALSA: hda: Add support for Loongson 7A1000 controller")
Cc: <stable@vger.kernel.org> # 5.9-rc1+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1598348388-2518-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit d55dad8b1d.
Upstream commit af199a1a9c ("net: dsa: microchip: set the correct
number of ports") seems to have been applied twice on top of the 5.4
branch. This revert the second instance of said commit.
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a48b73eca4 ]
With the conversion of the tree locks to rwsem I got the following
lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc7-00165-g04ec4da5f45f-dirty #922 Not tainted
------------------------------------------------------
compsize/11122 is trying to acquire lock:
ffff889fabca8768 (&mm->mmap_lock#2){++++}-{3:3}, at: __might_fault+0x3e/0x90
but task is already holding lock:
ffff889fe720fe40 (btrfs-fs-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (btrfs-fs-00){++++}-{3:3}:
down_write_nested+0x3b/0x70
__btrfs_tree_lock+0x24/0x120
btrfs_search_slot+0x756/0x990
btrfs_lookup_inode+0x3a/0xb4
__btrfs_update_delayed_inode+0x93/0x270
btrfs_async_run_delayed_root+0x168/0x230
btrfs_work_helper+0xd4/0x570
process_one_work+0x2ad/0x5f0
worker_thread+0x3a/0x3d0
kthread+0x133/0x150
ret_from_fork+0x1f/0x30
-> #1 (&delayed_node->mutex){+.+.}-{3:3}:
__mutex_lock+0x9f/0x930
btrfs_delayed_update_inode+0x50/0x440
btrfs_update_inode+0x8a/0xf0
btrfs_dirty_inode+0x5b/0xd0
touch_atime+0xa1/0xd0
btrfs_file_mmap+0x3f/0x60
mmap_region+0x3a4/0x640
do_mmap+0x376/0x580
vm_mmap_pgoff+0xd5/0x120
ksys_mmap_pgoff+0x193/0x230
do_syscall_64+0x50/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&mm->mmap_lock#2){++++}-{3:3}:
__lock_acquire+0x1272/0x2310
lock_acquire+0x9e/0x360
__might_fault+0x68/0x90
_copy_to_user+0x1e/0x80
copy_to_sk.isra.32+0x121/0x300
search_ioctl+0x106/0x200
btrfs_ioctl_tree_search_v2+0x7b/0xf0
btrfs_ioctl+0x106f/0x30a0
ksys_ioctl+0x83/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Chain exists of:
&mm->mmap_lock#2 --> &delayed_node->mutex --> btrfs-fs-00
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-fs-00);
lock(&delayed_node->mutex);
lock(btrfs-fs-00);
lock(&mm->mmap_lock#2);
*** DEADLOCK ***
1 lock held by compsize/11122:
#0: ffff889fe720fe40 (btrfs-fs-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180
stack backtrace:
CPU: 17 PID: 11122 Comm: compsize Kdump: loaded Not tainted 5.8.0-rc7-00165-g04ec4da5f45f-dirty #922
Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018
Call Trace:
dump_stack+0x78/0xa0
check_noncircular+0x165/0x180
__lock_acquire+0x1272/0x2310
lock_acquire+0x9e/0x360
? __might_fault+0x3e/0x90
? find_held_lock+0x72/0x90
__might_fault+0x68/0x90
? __might_fault+0x3e/0x90
_copy_to_user+0x1e/0x80
copy_to_sk.isra.32+0x121/0x300
? btrfs_search_forward+0x2a6/0x360
search_ioctl+0x106/0x200
btrfs_ioctl_tree_search_v2+0x7b/0xf0
btrfs_ioctl+0x106f/0x30a0
? __do_sys_newfstat+0x5a/0x70
? ksys_ioctl+0x83/0xc0
ksys_ioctl+0x83/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The problem is we're doing a copy_to_user() while holding tree locks,
which can deadlock if we have to do a page fault for the copy_to_user().
This exists even without my locking changes, so it needs to be fixed.
Rework the search ioctl to do the pre-fault and then
copy_to_user_nofault for the copying.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6570bc79c0 upstream.
Commit 323ebb61e3 ("net: use listified RX for handling GRO_NORMAL
skbs") made use of listified skb processing for the users of
napi_gro_frags().
The same technique can be used in a way more common napi_gro_receive()
to speed up non-merged (GRO_NORMAL) skbs for a wide range of drivers
including gro_cells and mac80211 users.
This slightly changes the return value in cases where skb is being
dropped by the core stack, but it seems to have no impact on related
drivers' functionality.
gro_normal_batch is left untouched as it's very individual for every
single system configuration and might be tuned in manual order to
achieve an optimal performance.
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Hyunsoon Kim <h10.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3beaa253f upstream.
These are special extent buffers that get rewound in order to lookup
the state of the tree at a specific point in time. As such they do not
go through the normal initialization paths that set their lockdep class,
so handle them appropriately when they are created and before they are
locked.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad24466588 upstream.
When flipping over to the rw_semaphore I noticed I'd get a lockdep splat
in replace_path(), which is weird because we're swapping the reloc root
with the actual target root. Turns out this is because we're using the
root->root_key.objectid as the root id for the newly allocated tree
block when setting the lockdep class, however we need to be using the
actual owner of this new block, which is saved in owner.
The affected path is through btrfs_copy_root as all other callers of
btrfs_alloc_tree_block (which calls init_new_buffer) have root_objectid
== root->root_key.objectid .
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e89c4a9c8e upstream.
I got the following lockdep splat while testing:
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc7-00172-g021118712e59 #932 Not tainted
------------------------------------------------------
btrfs/229626 is trying to acquire lock:
ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450
but task is already holding lock:
ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #7 (&fs_info->scrub_lock){+.+.}-{3:3}:
__mutex_lock+0x9f/0x930
btrfs_scrub_dev+0x11c/0x630
btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4
btrfs_ioctl+0x2799/0x30a0
ksys_ioctl+0x83/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__mutex_lock+0x9f/0x930
btrfs_run_dev_stats+0x49/0x480
commit_cowonly_roots+0xb5/0x2a0
btrfs_commit_transaction+0x516/0xa60
sync_filesystem+0x6b/0x90
generic_shutdown_super+0x22/0x100
kill_anon_super+0xe/0x30
btrfs_kill_super+0x12/0x20
deactivate_locked_super+0x29/0x60
cleanup_mnt+0xb8/0x140
task_work_run+0x6d/0xb0
__prepare_exit_to_usermode+0x1cc/0x1e0
do_syscall_64+0x5c/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
__mutex_lock+0x9f/0x930
btrfs_commit_transaction+0x4bb/0xa60
sync_filesystem+0x6b/0x90
generic_shutdown_super+0x22/0x100
kill_anon_super+0xe/0x30
btrfs_kill_super+0x12/0x20
deactivate_locked_super+0x29/0x60
cleanup_mnt+0xb8/0x140
task_work_run+0x6d/0xb0
__prepare_exit_to_usermode+0x1cc/0x1e0
do_syscall_64+0x5c/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}:
__mutex_lock+0x9f/0x930
btrfs_record_root_in_trans+0x43/0x70
start_transaction+0xd1/0x5d0
btrfs_dirty_inode+0x42/0xd0
touch_atime+0xa1/0xd0
btrfs_file_mmap+0x3f/0x60
mmap_region+0x3a4/0x640
do_mmap+0x376/0x580
vm_mmap_pgoff+0xd5/0x120
ksys_mmap_pgoff+0x193/0x230
do_syscall_64+0x50/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #3 (&mm->mmap_lock#2){++++}-{3:3}:
__might_fault+0x68/0x90
_copy_to_user+0x1e/0x80
perf_read+0x141/0x2c0
vfs_read+0xad/0x1b0
ksys_read+0x5f/0xe0
do_syscall_64+0x50/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #2 (&cpuctx_mutex){+.+.}-{3:3}:
__mutex_lock+0x9f/0x930
perf_event_init_cpu+0x88/0x150
perf_event_init+0x1db/0x20b
start_kernel+0x3ae/0x53c
secondary_startup_64+0xa4/0xb0
-> #1 (pmus_lock){+.+.}-{3:3}:
__mutex_lock+0x9f/0x930
perf_event_init_cpu+0x4f/0x150
cpuhp_invoke_callback+0xb1/0x900
_cpu_up.constprop.26+0x9f/0x130
cpu_up+0x7b/0xc0
bringup_nonboot_cpus+0x4f/0x60
smp_init+0x26/0x71
kernel_init_freeable+0x110/0x258
kernel_init+0xa/0x103
ret_from_fork+0x1f/0x30
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
__lock_acquire+0x1272/0x2310
lock_acquire+0x9e/0x360
cpus_read_lock+0x39/0xb0
alloc_workqueue+0x378/0x450
__btrfs_alloc_workqueue+0x15d/0x200
btrfs_alloc_workqueue+0x51/0x160
scrub_workers_get+0x5a/0x170
btrfs_scrub_dev+0x18c/0x630
btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4
btrfs_ioctl+0x2799/0x30a0
ksys_ioctl+0x83/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Chain exists of:
cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->scrub_lock);
lock(&fs_devs->device_list_mutex);
lock(&fs_info->scrub_lock);
lock(cpu_hotplug_lock);
*** DEADLOCK ***
2 locks held by btrfs/229626:
#0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630
#1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630
stack backtrace:
CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932
Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018
Call Trace:
dump_stack+0x78/0xa0
check_noncircular+0x165/0x180
__lock_acquire+0x1272/0x2310
lock_acquire+0x9e/0x360
? alloc_workqueue+0x378/0x450
cpus_read_lock+0x39/0xb0
? alloc_workqueue+0x378/0x450
alloc_workqueue+0x378/0x450
? rcu_read_lock_sched_held+0x52/0x80
__btrfs_alloc_workqueue+0x15d/0x200
btrfs_alloc_workqueue+0x51/0x160
scrub_workers_get+0x5a/0x170
btrfs_scrub_dev+0x18c/0x630
? start_transaction+0xd1/0x5d0
btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4
btrfs_ioctl+0x2799/0x30a0
? do_sigaction+0x102/0x250
? lockdep_hardirqs_on_prepare+0xca/0x160
? _raw_spin_unlock_irq+0x24/0x30
? trace_hardirqs_on+0x1c/0xe0
? _raw_spin_unlock_irq+0x24/0x30
? do_sigaction+0x102/0x250
? ksys_ioctl+0x83/0xc0
ksys_ioctl+0x83/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This happens because we're allocating the scrub workqueues under the
scrub and device list mutex, which brings in a whole host of other
dependencies.
Because the work queue allocation is done with GFP_KERNEL, it can
trigger reclaim, which can lead to a transaction commit, which in turns
needs the device_list_mutex, it can lead to a deadlock. A different
problem for which this fix is a solution.
Fix this by moving the actual allocation outside of the
scrub lock, and then only take the lock once we're ready to actually
assign them to the fs_info. We'll now have to cleanup the workqueues in
a few more places, so I've added a helper to do the refcount dance to
safely free the workqueues.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9771a5cf93 upstream.
With the conversion of the tree locks to rwsem I got the following
lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925 Not tainted
------------------------------------------------------
btrfs-uuid/7955 is trying to acquire lock:
ffff88bfbafec0f8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180
but task is already holding lock:
ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (btrfs-uuid-00){++++}-{3:3}:
down_read_nested+0x3e/0x140
__btrfs_tree_read_lock+0x39/0x180
__btrfs_read_lock_root_node+0x3a/0x50
btrfs_search_slot+0x4bd/0x990
btrfs_uuid_tree_add+0x89/0x2d0
btrfs_uuid_scan_kthread+0x330/0x390
kthread+0x133/0x150
ret_from_fork+0x1f/0x30
-> #0 (btrfs-root-00){++++}-{3:3}:
__lock_acquire+0x1272/0x2310
lock_acquire+0x9e/0x360
down_read_nested+0x3e/0x140
__btrfs_tree_read_lock+0x39/0x180
__btrfs_read_lock_root_node+0x3a/0x50
btrfs_search_slot+0x4bd/0x990
btrfs_find_root+0x45/0x1b0
btrfs_read_tree_root+0x61/0x100
btrfs_get_root_ref.part.50+0x143/0x630
btrfs_uuid_tree_iterate+0x207/0x314
btrfs_uuid_rescan_kthread+0x12/0x50
kthread+0x133/0x150
ret_from_fork+0x1f/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(btrfs-uuid-00);
lock(btrfs-root-00);
lock(btrfs-uuid-00);
lock(btrfs-root-00);
*** DEADLOCK ***
1 lock held by btrfs-uuid/7955:
#0: ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180
stack backtrace:
CPU: 73 PID: 7955 Comm: btrfs-uuid Kdump: loaded Not tainted 5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925
Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018
Call Trace:
dump_stack+0x78/0xa0
check_noncircular+0x165/0x180
__lock_acquire+0x1272/0x2310
lock_acquire+0x9e/0x360
? __btrfs_tree_read_lock+0x39/0x180
? btrfs_root_node+0x1c/0x1d0
down_read_nested+0x3e/0x140
? __btrfs_tree_read_lock+0x39/0x180
__btrfs_tree_read_lock+0x39/0x180
__btrfs_read_lock_root_node+0x3a/0x50
btrfs_search_slot+0x4bd/0x990
btrfs_find_root+0x45/0x1b0
btrfs_read_tree_root+0x61/0x100
btrfs_get_root_ref.part.50+0x143/0x630
btrfs_uuid_tree_iterate+0x207/0x314
? btree_readpage+0x20/0x20
btrfs_uuid_rescan_kthread+0x12/0x50
kthread+0x133/0x150
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x1f/0x30
This problem exists because we have two different rescan threads,
btrfs_uuid_scan_kthread which creates the uuid tree, and
btrfs_uuid_tree_iterate that goes through and updates or deletes any out
of date roots. The problem is they both do things in different order.
btrfs_uuid_scan_kthread() reads the tree_root, and then inserts entries
into the uuid_root. btrfs_uuid_tree_iterate() scans the uuid_root, but
then does a btrfs_get_fs_root() which can read from the tree_root.
It's actually easy enough to not be holding the path in
btrfs_uuid_scan_kthread() when we add a uuid entry, as we already drop
it further down and re-start the search when we loop. So simply move
the path release before we add our entry to the uuid tree.
This also fixes a problem where we're holding a path open after we do
btrfs_end_transaction(), which has it's own problems.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit feb92d7d38 upstream.
Current code inadventely bails if hardware supports sampling/overflow
interrupts, but the irq is missing from device tree.
|
| # perf stat -e cycles,instructions,major-faults,minor-faults ../hackbench
| Running with 10 groups 400 process
| Time: 0.921
|
| Performance counter stats for '../hackbench':
|
| <not supported> cycles
| <not supported> instructions
| 0 major-faults
| 8679 minor-faults
This need not be as we can still do simple counting based perf stat.
This unborks perf on HSDK-4xD
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b17164e258 upstream.
When running in a dax mode, if the user maps a page with MAP_PRIVATE and
PROT_WRITE, the xfs filesystem would incorrectly update ctime and mtime
when the user hits a COW fault.
This breaks building of the Linux kernel. How to reproduce:
1. extract the Linux kernel tree on dax-mounted xfs filesystem
2. run make clean
3. run make -j12
4. run make -j12
at step 4, make would incorrectly rebuild the whole kernel (although it
was already built in step 3).
The reason for the breakage is that almost all object files depend on
objtool. When we run objtool, it takes COW page fault on its .data
section, and these faults will incorrectly update the timestamp of the
objtool binary. The updated timestamp causes make to rebuild the whole
tree.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ef6ea0efe upstream.
When running in a dax mode, if the user maps a page with MAP_PRIVATE and
PROT_WRITE, the ext2 filesystem would incorrectly update ctime and mtime
when the user hits a COW fault.
This breaks building of the Linux kernel. How to reproduce:
1. extract the Linux kernel tree on dax-mounted ext2 filesystem
2. run make clean
3. run make -j12
4. run make -j12
at step 4, make would incorrectly rebuild the whole kernel (although it
was already built in step 3).
The reason for the breakage is that almost all object files depend on
objtool. When we run objtool, it takes COW page fault on its .data
section, and these faults will incorrectly update the timestamp of the
objtool binary. The updated timestamp causes make to rebuild the whole
tree.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abafbc551f upstream.
Accessing the disabled memory space of a PCI device would typically
result in a master abort response on conventional PCI, or an
unsupported request on PCI express. The user would generally see
these as a -1 response for the read return data and the write would be
silently discarded, possibly with an uncorrected, non-fatal AER error
triggered on the host. Some systems however take it upon themselves
to bring down the entire system when they see something that might
indicate a loss of data, such as this discarded write to a disabled
memory space.
To avoid this, we want to try to block the user from accessing memory
spaces while they're disabled. We start with a semaphore around the
memory enable bit, where writers modify the memory enable state and
must be serialized, while readers make use of the memory region and
can access in parallel. Writers include both direct manipulation via
the command register, as well as any reset path where the internal
mechanics of the reset may both explicitly and implicitly disable
memory access, and manipulation of the MSI-X configuration, where the
MSI-X vector table resides in MMIO space of the device. Readers
include the read and write file ops to access the vfio device fd
offsets as well as memory mapped access. In the latter case, we make
use of our new vma list support to zap, or invalidate, those memory
mappings in order to force them to be faulted back in on access.
Our semaphore usage will stall user access to MMIO spaces across
internal operations like reset, but the user might experience new
behavior when trying to access the MMIO space while disabled via the
PCI command register. Access via read or write while disabled will
return -EIO and access via memory maps will result in a SIGBUS. This
is expected to be compatible with known use cases and potentially
provides better error handling capabilities than present in the
hardware, while avoiding the more readily accessible and severe
platform error responses that might otherwise occur.
Fixes: CVE-2020-12888
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 11c4cd07ba upstream.
Rather than calling remap_pfn_range() when a region is mmap'd, setup
a vm_ops handler to support dynamic faulting of the range on access.
This allows us to manage a list of vmas actively mapping the area that
we can later use to invalidate those mappings. The open callback
invalidates the vma range so that all tracking is inserted in the
fault handler and removed in the close handler.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4131124222 upstream.
With conversion to follow_pfn(), DMA mapping a PFNMAP range depends on
the range being faulted into the vma. Add support to manually provide
that, in the same way as done on KVM with hva_to_pfn_remapped().
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acf69c9462 ]
Using tp_reserve to calculate netoff can overflow as
tp_reserve is unsigned int and netoff is unsigned short.
This may lead to macoff receving a smaller value then
sizeof(struct virtio_net_hdr), and if po->has_vnet_hdr
is set, an out-of-bounds write will occur when
calling virtio_net_hdr_from_skb.
The bug is fixed by converting netoff to unsigned int
and checking if it exceeds USHRT_MAX.
This addresses CVE-2020-14386
Fixes: 8913336a7e ("packet: add PACKET_RESERVE sockopt")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30d24faba0 ]
We can sometimes get bogus thermal shutdowns on omap4430 at least with
droid4 running idle with a battery charger connected:
thermal thermal_zone0: critical temperature reached (143 C), shutting down
Dumping out the register values shows we can occasionally get a 0x7f value
that is outside the TRM listed values in the ADC conversion table. And then
we get a normal value when reading again after that. Reading the register
multiple times does not seem help avoiding the bogus values as they stay
until the next sample is ready.
Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we
should have values from 13 to 107 listed with a total of 95 values. But
looking at the omap4430_adc_to_temp array, the values are off, and the
end values are missing. And it seems that the 4430 ADC table is similar
to omap3630 rather than omap4460.
Let's fix the issue by using values based on the omap3630 table and just
ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has
the missing values added while the TRM table only shows every second
value.
Note that sometimes the ADC register values within the valid table can
also be way off for about 1 out of 10 values. But it seems that those
just show about 25 C too low values rather than too high values. So those
do not cause a bogus thermal shutdown.
Fixes: 1a31270e54 ("staging: omap-thermal: add OMAP4 data structures")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e4e9ec650 ]
The VT-d spec requires (10.4.4 Global Command Register, GCMD_REG General
Description) that:
If multiple control fields in this register need to be modified, software
must serialize the modifications through multiple writes to this register.
However, in irq_remapping.c, modifications of IRE and CFI are done in one
write. We need to do two separate writes with STS checking after each. It
also checks the status register before writing command register to avoid
unnecessary register write.
Fixes: af8d102f99 ("x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200828000615.8281-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 556699341e ]
If tg3_reset_task() fails, the device state is left in an inconsistent
state with IFF_RUNNING still set but NAPI state not enabled. A
subsequent operation, such as ifdown or AER error can cause it to
soft lock up when it tries to disable NAPI state.
Fix it by bringing down the device to !IFF_RUNNING state when
tg3_reset_task() fails. tg3_reset_task() running from workqueue
will now call tg3_close() when the reset fails. We need to
modify tg3_reset_task_cancel() slightly to avoid tg3_close()
calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise
cancel_work_sync() will wait forever for tg3_reset_task() to
finish.
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Reported-by: Baptiste Covolato <baptiste@arista.com>
Fixes: db21997379 ("tg3: Schedule at most one tg3_reset_task run")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0c20d38af ]
The realtime flag only applies to the data fork, so don't use the
realtime block number checks on the attr fork of a realtime file.
Fixes: 30b0984d91 ("xfs: refactor bmap record validation")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb06748207 ]
In cc97ab235f ("MIPS: Simplify FP context initialization), init_fp_ctx
just initialize the fp/msa context, and own_fp_inatomic just restore
FCSR and 64bit FP regs from it, but miss MSACSR and upper MSA regs for
MSA, so MSACSR and MSA upper regs's value from previous task on current
cpu can leak into current task and cause unpredictable behavior when MSA
context not initialized.
Fixes: cc97ab235f ("MIPS: Simplify FP context initialization")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb0f3bc463 ]
We recently added some calls to clk_disable_unprepare() but we missed
the last error path if register_netdev() fails.
I made a couple cleanups so we avoid mistakes like this in the future.
First I reversed the "if (!ret)" condition and pulled the code in one
indent level. Also, the "port->netdev = NULL;" is not required because
"port" isn't used again outside this function so I deleted that line.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77f4689de1 ]
epoll_loop_check_proc() can run into a file already committed to destruction;
we can't grab a reference on those and don't need to add them to the set for
reverse path check anyway.
Tested-by: Marc Zyngier <maz@kernel.org>
Fixes: a9ed4a6560 ("epoll: Keep a reference on files added to the check list")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbedcb044e ]
On machines with much memory (> 2 TByte) and log_mtts_per_seg == 0, a
max_order of 31 will be passed to mlx_buddy_init(), which results in
s = BITS_TO_LONGS(1 << 31) becoming a negative value, leading to
kvmalloc_array() failure when it is converted to size_t.
mlx4_core 0000:b1:00.0: Failed to initialize memory region table, aborting
mlx4_core: probe of 0000:b1:00.0 failed with error -12
Fix this issue by changing the left shifting operand from a signed literal to
an unsigned one.
Fixes: 225c7b1fee ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 192f6c29bb ]
If the driver has to unbind from the controller for an early failure
before the subsystem has been set up, there won't be a subsystem holding
the controller's instance, so the controller needs to free its own
instance in this case.
Fixes: 733e4b69d5 ("nvme: Assign subsys instance from first ctrl")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70e37988db ]
The way 'spin_lock()' and 'spin_lock_irqsave()' are used is not consistent
in this function.
Use 'spin_lock_irqsave()' also here, as there is no guarantee that
interruptions are disabled at that point, according to surrounding code.
Fixes: a97ec51b37 ("nvmet_fc: Rework target side abort handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee92118355 ]
Frontend callback reports EAGAIN to nfnetlink to retry a command, this
is used to signal that module autoloading is required. Unfortunately,
nlmsg_unicast() reports EAGAIN in case the receiver socket buffer gets
full, so it enters a busy-loop.
This patch updates nfnetlink_unicast() to turn EAGAIN into ENOBUFS and
to use nlmsg_unicast(). Remove the flags field in nfnetlink_unicast()
since this is always MSG_DONTWAIT in the existing code which is exactly
what nlmsg_unicast() passes to netlink_unicast() as parameter.
Fixes: 96518518cc ("netfilter: add nftables")
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa4505675e ]
When stdout output from the selftests tool 'test_maps' gets redirected
into e.g file or pipe, then the output lines increase a lot (from 21
to 33949 lines). This is caused by the printf that happens before the
fork() call, and there are user-space buffered printf data that seems
to be duplicated into the forked process.
To fix this fflush() stdout before the fork loop in __run_parallel().
Fixes: 1a97cf1fe5 ("selftests/bpf: speedup test_maps")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/159842985651.1050885.2154399297503372406.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b30063976f ]
The check for a required control in the request was missing a call to
v4l2_ctrl_request_hdl_put() in the error path. Fix it.
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e7c8fb894 ]
The check for a required control in the request was missing a call to
v4l2_ctrl_request_hdl_put(), so the control request object was never
released.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 997deb811b ("media: vicodec: Add support for stateless decoder.")
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4020438fa ]
The boundary test for the fixed-offset parts of xfs_attr_sf_entry in
xfs_attr_shortform_verify is off by one, because the variable array
at the end is defined as nameval[1] not nameval[].
Hence we need to subtract 1 from the calculation.
This can be shown by:
# touch file
# setfattr -n root.a file
and verifications will fail when it's written to disk.
This only matters for a last attribute which has a single-byte name
and no value, otherwise the combination of namelen & valuelen will
push endp further out and this test won't fail.
Fixes: 1e1bbd8e7e ("xfs: create structure verifier function for shortform xattrs")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12cce90b93 ]
Firmware returns RESOURCE_ACCESS_DENIED for HWRM_TEMP_MONITORY_QUERY for
VFs. This produces unpleasing error messages in the log when temp1_input
is queried via the hwmon sysfs interface from a VF.
The error is harmless and expected, so silence it and return unknown as
the value. Since the device temperature is not particularly sensitive
information, provide flexibility to change this policy in future by
silencing the error rather than avoiding the HWRM call entirely for VFs.
Fixes: cde49a42a9 ("bnxt_en: Add hwmon sysfs support to read temperature")
Cc: Marc Smith <msmith626@gmail.com>
Reported-by: Marc Smith <msmith626@gmail.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b148bb238c ]
bnxt_fw_reset_task() is run from a delayed workqueue. The current
code is not cancelling the workqueue in the driver's .remove()
method and it can potentially crash if the device is removed with
the workqueue still pending.
The fix is to clear the BNXT_STATE_IN_FW_RESET flag and then cancel
the delayed workqueue in bnxt_remove_one(). bnxt_queue_fw_reset_work()
also needs to check that this flag is set before scheduling. This
will guarantee that no rescheduling will be done after it is cancelled.
Fixes: 230d1f0de7 ("bnxt_en: Handle firmware reset.")
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbbfa96ad9 ]
If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware
command may return zero dir entries. Return error in such case to
avoid zero length dma buffer request.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1c2d77408 ]
In rare conditions like two stage OS installation, the
ethtool's get_channels function may be called when the
device is in D3 state, leading to uncorrectable PCI error.
Check netif_running() first before making any query to FW
which involves writing to BAR.
Fixes: db4723b3cd ("bnxt_en: Check max_tx_scheduler_inputs value from firmware.")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99d469fc64 ]
To flush the vid + mc entries from ALE, which is required when a VLAN
interface is removed, driver needs to call cpsw_ale_flush_multicast()
with ALE_PORT_HOST for port mask as these entries are added only for
host port. Without this, these entries remain in the ALE table even
after removing the VLAN interface. cpsw_ale_flush_multicast() calls
cpsw_ale_flush_mcast which expects a port mask to do the job.
Fixes: 15180eca56 ("net: ethernet: ti: cpsw: fix vlan mcast")
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b274e47d9e ]
During a dump, this attribute is essential, it enables the userspace to
know on which interface the context is linked to.
Fixes: 459aa660eb ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Gabriel Ganne <gabriel.ganne@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2d79cd887 ]
When devm_gpiod_get_optional() fails, bus should be
freed just like when of_mdiobus_register() fails.
Fixes: 1bddd96cba ("net: arc_emac: support the phy reset for emac driver")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1838d6c62f ]
When this driver is built as a module, I cannot rmmod it after insmoding
it.
This is because that this driver calls ravb_mdio_init() at the time of
probe, and module->refcnt is incremented by alloc_mdio_bitbang() called
after that.
Therefore, even if ifup is not performed, the driver is in use and rmmod
cannot be performed.
$ lsmod
Module Size Used by
ravb 40960 1
$ rmmod ravb
rmmod: ERROR: Module ravb is in use
Call ravb_mdio_init() at open and free_mdio_bitbang() at close, thereby
rmmod is possible in the ifdown state.
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yuusuke Ashizuka <ashiduka@fujitsu.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ef1fc5730 ]
When devm_kcalloc() fails, dev should be freed just
like what we've done in the subsequent error paths.
Fixes: 7b78be48a8 ("net: systemport: Dynamically allocate number of TX rings")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 100e3345c6 ]
hns_nic_dev_probe allocates ndev, but not free it on
two error handling paths, which may lead to memleak.
Fixes: 63434888aa ("net: hns: net: hns: enet adds support of acpi")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e105e6afa ]
Following bug was reported via irc:
nft list ruleset
set knock_candidates_ipv4 {
type ipv4_addr . inet_service
size 65535
elements = { 127.0.0.1 . 123,
127.0.0.1 . 123 }
}
..
udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 }
udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport }
It should not have been possible to add a duplicate set entry.
After some debugging it turned out that the problem is the immediate
value (123) in the second-to-last rule.
Concatenations use 32bit registers, i.e. the elements are 8 bytes each,
not 6 and it turns out the kernel inserted
inet firewall @knock_candidates_ipv4
element 0100007f ffff7b00 : 0 [end]
element 0100007f 00007b00 : 0 [end]
Note the non-zero upper bits of the first element. It turns out that
nft_immediate doesn't zero the destination register, but this is needed
when the length isn't a multiple of 4.
Furthermore, the zeroing in nft_payload is broken. We can't use
[len / 4] = 0 -- if len is a multiple of 4, index is off by one.
Skip zeroing in this case and use a conditional instead of (len -1) / 4.
Fixes: 49499c3e6e ("netfilter: nf_tables: switch registers to 32 bit addressing")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da9125df85 ]
This should be NFTA_LIST_UNSPEC instead of NFTA_LIST_UNPEC, all other
similar attribute definitions are postfixed with _UNSPEC.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f03bf43ee ]
Kernel sends an empty NFTA_SET_USERDATA attribute with no value if
userspace adds a set with no NFTA_SET_USERDATA attribute.
Fixes: e6d8ecac9e ("netfilter: nf_tables: Add new attributes into nft_set to store user data.")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61d7437ed1 ]
The AMD eMMC Controller can only use the tuned clock while in HS200 and
HS400 mode. If we switch to a different mode, we need to disable the
tuned clock. If we have previously performed tuning and switch back to
HS200 or HS400, we can re-enable the tuned clock.
Previously the tuned clock was not getting disabled when switching to
DDR52 which is part of the HS400 tuning sequence.
Fixes: 34597a3f60 ("mmc: sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200819125832.v2.1.Ie8f0689ec9f449203328b37409d1cf06b565f331@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e14f633b66 ]
The initialization done by bmips_cpu_setup() typically affects both
threads of a given core, on 7435 which supports 2 cores and 2 threads,
logical CPU number 2 and 3 would not run this initialization.
Fixes: 738a3f7902 ("MIPS: BMIPS: Add early CPU initialization code")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbfc95f98f ]
When the BMIPS generic cpu-feature-overrides.h file was introduced,
cpu_has_inclusive_caches/MIPS_CPU_INCLUSIVE_CACHES was not set for
BMIPS5000 CPUs. Correct this when we have initialized the MIPS secondary
cache successfully.
Fixes: f337967d6d ("MIPS: BMIPS: Add cpu-feature-overrides.h")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d4adfaf65 ]
Fix rxrpc_kernel_get_srtt() to indicate the validity of the returned
smoothed RTT. If we haven't had any valid samples yet, the SRTT isn't
useful.
Fixes: c410bf0193 ("rxrpc: Fix the excessive initial retransmission timeout")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68528d937d ]
Keep the ACK serial number in a variable in rxrpc_input_ack() as it's used
frequently.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 279e89b228 ]
batadv_bla_send_claim() gets called from worker thread context through
batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that
case. This fixes "NOHZ: local_softirq_pending 08" log messages seen
when batman-adv is enabled.
Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8bf0c0164 ]
The own OGM check is currently misplaced and can lead to the following
issues:
For one thing we might receive an aggregated OGM from a neighbor node
which has our own OGM in the first place. We would then not only skip
our own OGM but erroneously also any other, following OGM in the
aggregate.
For another, we might receive an OGM aggregate which has our own OGM in
a place other then the first one. Then we would wrongly not skip this
OGM, leading to populating the orginator and gateway table with ourself.
Fixes: 9323158ef9 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 303216e76d ]
The gateway client code can try to optimize the delivery of DHCP packets to
avoid broadcasting them through the whole mesh. But also transmissions to
the client can be optimized by looking up the destination via the chaddr of
the DHCP packet.
But the chaddr is currently only done when chaddr is fully inside the
non-paged area of the skbuff. Otherwise it will not be initialized and the
unoptimized path should have been taken.
But the implementation didn't handle this correctly. It didn't retrieve the
correct chaddr but still tried to perform the TT lookup with this
uninitialized memory.
Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com
Fixes: 6c413b1c22 ("batman-adv: send every DHCP packet as bat-unicast")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a4c56c80f ]
Commit ef91bb196b ("kernel.h: Silence sparse warning in
lower_32_bits") caused new warnings to show in the fsldma driver, but
that commit was not to blame: it only exposed some very incorrect code
that tried to take the low 32 bits of an address.
That made no sense for multiple reasons, the most notable one being that
that code was intentionally limited to only 32-bit ppc builds, so "only
low 32 bits of an address" was completely nonsensical. There were no
high bits to mask off to begin with.
But even more importantly fropm a correctness standpoint, turning the
address into an integer then caused the subsequent address arithmetic to
be completely wrong too, and the "+1" actually incremented the address
by one, rather than by four.
Which again was incorrect, since the code was reading two 32-bit values
and trying to make a 64-bit end result of it all. Surprisingly, the
iowrite64() did not suffer from the same odd and incorrect model.
This code has never worked, but it's questionable whether anybody cared:
of the two users that actually read the 64-bit value (by way of some C
preprocessor hackery and eventually the 'get_cdar()' inline function),
one of them explicitly ignored the value, and the other one might just
happen to work despite the incorrect value being read.
This patch at least makes it not fail the build any more, and makes the
logic superficially sane. Whether it makes any difference to the code
_working_ or not shall remain a mystery.
Compile-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b67a468a4c ]
When amdgpu_display_modeset_create_props() fails, state and
state->context should be freed to prevent memleak. It's the
same when amdgpu_dm_audio_init() fails.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef67d792a2 ]
[Why]
In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We
suppose every write wil get done successfully and hence some AUX
commands might not sent out indeed.
[How]
Check if AUX_WR success. If not, retry it.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5896585512 ]
In `amdgpu_dm_update_backlight_caps()`, there is a local
`amdgpu_dm_backlight_caps` object that is filled in by
`amdgpu_acpi_get_backlight_caps()`. However, this object is
uninitialized before the call and hence the subsequent check for
aux_support can fail since it is not initialized by
`amdgpu_acpi_get_backlight_caps()` as well. This change initializes
this local `amdgpu_dm_backlight_caps` object to 0.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 168f09cdad ]
[Why]
These aren't stable on some platform configurations when driving
multiple displays, especially on higher resolution.
In particular the delay in asserting p-state and validating from
x86 outweights any power or performance benefit from the hardware
composition.
Under some configurations this will manifest itself as extreme stutter
or unresponsiveness especially when combined with cursor movement.
[How]
Disable these for now. Exposing overlays to userspace doesn't guarantee
that they'll be able to use them in any and all configurations and it's
part of the DRM contract to have userspace gracefully handle validation
failures when they occur.
Valdiation occurs as part of DC and this in particular affects RV, so
disable this in dcn10_global_validation.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acb19e17c5 ]
If we configured io timeout of nbd0 to 100s. Later after we
finished using it, we configured nbd0 again and set the io
timeout to 0. We expect it would timeout after 30 seconds
and keep retry. But in fact we could not change the timeout
when we set it to 0. the timeout is still the original 100s.
So change the timeout to default 30s when we set it to zero.
It also behaves same as commit 2da22da573 ("nbd: fix zero
cmd timeout handling v2").
It becomes more important if we were reconfigure a nbd device
and the io timeout it set to zero. Because it could take 30s
to detect the new socket and thus io could be completed more
quickly compared to 100s.
Signed-off-by: Hou Pu <houpu@bytedance.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fd5b25499 ]
After commit 92cc68e358 ("drm/vblank: Use
spin_(un)lock_irq() in drm_crtc_vblank_on()") omapdrm locking is broken:
WARNING: inconsistent lock state
5.8.0-rc2-00483-g92cc68e35863 #13 Tainted: G W
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
ea98222c (&dev->event_lock#2){?.+.}-{2:2}, at: drm_handle_vblank+0x4c/0x520 [drm]
{HARDIRQ-ON-W} state was registered at:
trace_hardirqs_on+0x9c/0x1ec
_raw_spin_unlock_irq+0x20/0x58
omap_crtc_atomic_enable+0x54/0xa0 [omapdrm]
drm_atomic_helper_commit_modeset_enables+0x218/0x270 [drm_kms_helper]
omap_atomic_commit_tail+0x48/0xc4 [omapdrm]
commit_tail+0x9c/0x190 [drm_kms_helper]
drm_atomic_helper_commit+0x154/0x188 [drm_kms_helper]
drm_client_modeset_commit_atomic+0x228/0x268 [drm]
drm_client_modeset_commit_locked+0x60/0x1d0 [drm]
drm_client_modeset_commit+0x24/0x40 [drm]
drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa8 [drm_kms_helper]
drm_fb_helper_set_par+0x2c/0x5c [drm_kms_helper]
drm_fb_helper_hotplug_event.part.0+0xa0/0xbc [drm_kms_helper]
drm_kms_helper_hotplug_event+0x24/0x30 [drm_kms_helper]
output_poll_execute+0x1a8/0x1c0 [drm_kms_helper]
process_one_work+0x268/0x800
worker_thread+0x30/0x4e0
kthread+0x164/0x190
ret_from_fork+0x14/0x20
The reason for this is that omapdrm calls drm_crtc_vblank_on() while
holding event_lock taken with spin_lock_irq().
It is not clear why drm_crtc_vblank_on() and drm_crtc_vblank_get() are
called while holding event_lock. I don't see any problem with moving
those calls outside the lock, which is what this patch does.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819103021.440288-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 496ceaf124 ]
Leases don't currently work correctly on kcephfs, as they are not broken
when caps are revoked. They could eventually be implemented similarly to
how we did them in libcephfs, but for now don't allow them.
[ idryomov: no need for simple_nosetlease() in ceph_dir_fops and
ceph_snapdir_fops ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0839152f8c ]
vmalloc can return different return code than NULL and a valid
pointer. We must validate it in order to dereference a non valid
pointer.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bce382a8bb ]
We must validate FW size in order not to corrupt memory in case
a malicious FW file will be present in system.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43906812ea ]
This has roughly the same effect as drm_atomic_helper_wait_for_vblanks(),
basically just ensuring that vblank accounting is enabled so that we get
valid timestamp/seqn on pageflip events.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d3b6a8d21 ]
Based on nvme spec, when keep alive timeout is set to zero
the keep-alive timer should be disabled.
Signed-off-by: Amit Engel <amit.engel@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cecf7560f0 ]
clang static analysis reports this representative problem
applesmc.c:758:10: warning: 1st function call argument is an
uninitialized value
left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
buffer is filled by the earlier call
ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, ...
This problem is reported because a goto skips the status check.
Other similar problems use data from applesmc_read_key before checking
the status. So move the checks to before the use.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Henrik Rydberg <rydberg@bitmath.org>
Link: https://lore.kernel.org/r/20200820131932.10590-1-trix@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d5cbf5fe4 ]
Define shutdown callback for display drm driver,
so as to disable all the CRTCS when shutdown
notification is received by the driver.
This change will turn off the timing engine so
that no display transactions are requested
while mmu translations are getting disabled
during reboot sequence.
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Changes in v2:
- Remove NULL check from msm_pdev_shutdown (Stephen Boyd)
- Change commit text to reflect when this issue
was uncovered (Sai Prakash Ranjan)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c978caf08 ]
Plane validation uses an API drm_calc_scale which will
return src/dst value as a scale ratio.
when viewing the range on a scale the values should fall in as
Upscale ratio < Unity scale < Downscale ratio for src/dst formula
Fix the min and max scale ratios to suit the API accordingly.
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 627a49975b ]
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. One Lenovo PixArt
mouse is already fixed. Got two references for 17ef:602e and three
references for 17ef:6019 misbehaving like this. Got one direct bug
report for 17ef:6093 from Wyatt Ward (wyatt8740). So add
HID_QUIRK_ALWAYS_POLL for all of them.
Link: https://github.com/sriemer/fix-linux-mouse issue 22
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Enable the CHACHA20 cipher, a high-performance AES alternative, and the
POLY1305 authentication algorithm. Together they make up RFC-7539.
Can be used to run the strongSwan Open Source VPN server and client.
See: https://github.com/raspberrypi/linux/issues/3836
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
commit 3c58f73723 upstream.
(scatter|gather)_data_area() need to flush dcache after writing data to or
before reading data from a page in uio data area. The two routines are
able to handle data transfer to/from such a page in fragments and flush the
cache after each fragment was copied by calling the wrapper
tcmu_flush_dcache_range().
That means:
1) flush_dcache_page() can be called multiple times for the same page.
2) Calling flush_dcache_page() indirectly using the wrapper does not make
sense, because each call of the wrapper is for one single page only and
the calling routine already has the correct page pointer.
Change (scatter|gather)_data_area() such that, instead of calling
tcmu_flush_dcache_range() before/after each memcpy, it now calls
flush_dcache_page() before unmapping a page (when writing is complete for
that page) or after mapping a page (when starting to read the page).
After this change only calls to tcmu_flush_dcache_range() for addresses in
vmalloc'ed command ring are left over.
The patch was tested on ARM with kernel 4.19.118 and 5.7.2
Link: https://lore.kernel.org/r/20200618131632.32748-2-bstroesser@ts.fujitsu.com
Tested-by: JiangYu <lnsyyj@hotmail.com>
Tested-by: Daniel Meyerholt <dxm523@gmail.com>
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c4e0f2123 upstream.
1) If remaining ring space before the end of the ring is smaller then the
next cmd to write, tcmu writes a padding entry which fills the remaining
space at the end of the ring.
Then tcmu calls tcmu_flush_dcache_range() with the size of struct
tcmu_cmd_entry as data length to flush. If the space filled by the
padding was smaller then tcmu_cmd_entry, tcmu_flush_dcache_range() is
called for an address range reaching behind the end of the vmalloc'ed
ring.
tcmu_flush_dcache_range() in a loop calls
flush_dcache_page(virt_to_page(start)); for every page being part of the
range. On x86 the line is optimized out by the compiler, as
flush_dcache_page() is empty on x86.
But I assume the above can cause trouble on other architectures that
really have a flush_dcache_page(). For paddings only the header part of
an entry is relevant due to alignment rules the header always fits in
the remaining space, if padding is needed. So tcmu_flush_dcache_range()
can safely be called with sizeof(entry->hdr) as the length here.
2) After it has written a command to cmd ring, tcmu calls
tcmu_flush_dcache_range() using the size of a struct tcmu_cmd_entry as
data length to flush. But if a command needs many iovecs, the real size
of the command may be bigger then tcmu_cmd_entry, so a part of the
written command is not flushed then.
Link: https://lore.kernel.org/r/20200528193108.9085-1-bstroesser@ts.fujitsu.com
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71a7f8cb1c upstream.
AT instructions do a translation table walk and return the result, or
the fault in PAR_EL1. KVM uses these to find the IPA when the value is
not provided by the CPU in HPFAR_EL1.
If a translation table walk causes an external abort it is taken as an
exception, even if it was due to an AT instruction. (DDI0487F.a's D5.2.11
"Synchronous faults generated by address translation instructions")
While we previously made KVM resilient to exceptions taken due to AT
instructions, the device access causes mismatched attributes, and may
occur speculatively. Prevent this, by forbidding a walk through memory
described as device at stage2. Now such AT instructions will report a
stage2 fault.
Such a fault will cause KVM to restart the guest. If the AT instructions
always walk the page tables, but guest execution uses the translation cached
in the TLB, the guest can't make forward progress until the TLB entry is
evicted. This isn't a problem, as since commit 5dcd0fdbb4 ("KVM: arm64:
Defer guest entry when an asynchronous exception is pending"), KVM will
return to the host to process IRQs allowing the rest of the system to keep
running.
Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdbb4 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending")
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88a84ccccb upstream.
KVM doesn't expect any synchronous exceptions when executing, any such
exception leads to a panic(). AT instructions access the guest page
tables, and can cause a synchronous external abort to be taken.
The arm-arm is unclear on what should happen if the guest has configured
the hardware update of the access-flag, and a memory type in TCR_EL1 that
does not support atomic operations. B2.2.6 "Possible implementation
restrictions on using atomic instructions" from DDI0487F.a lists
synchronous external abort as a possible behaviour of atomic instructions
that target memory that isn't writeback cacheable, but the page table
walker may behave differently.
Make KVM robust to synchronous exceptions caused by AT instructions.
Add a get_user() style helper for AT instructions that returns -EFAULT
if an exception was generated.
While KVM's version of the exception table mixes synchronous and
asynchronous exceptions, only one of these can occur at each location.
Re-enter the guest when the AT instructions take an exception on the
assumption the guest will take the same exception. This isn't guaranteed
to make forward progress, as the AT instructions may always walk the page
tables, but guest execution may use the translation cached in the TLB.
This isn't a problem, as since commit 5dcd0fdbb4 ("KVM: arm64: Defer guest
entry when an asynchronous exception is pending"), KVM will return to the
host to process IRQs allowing the rest of the system to keep running.
Cc: stable@vger.kernel.org # <v5.3: 5dcd0fdbb4 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending")
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9ee186bb7 upstream.
KVM has a one instruction window where it will allow an SError exception
to be consumed by the hypervisor without treating it as a hypervisor bug.
This is used to consume asynchronous external abort that were caused by
the guest.
As we are about to add another location that survives unexpected exceptions,
generalise this code to make it behave like the host's extable.
KVM's version has to be mapped to EL2 to be accessible on nVHE systems.
The SError vaxorcism code is a one instruction window, so has two entries
in the extable. Because the KVM code is copied for VHE and nVHE, we end up
with four entries, half of which correspond with code that isn't mapped.
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f232d9ec02 upstream.
As seen in the Vivante kernel driver, most GPUs with the BLT engine have
a broken TS cache flush. The workaround is to temporarily set the BLT
command to CLEAR_IMAGE, without actually executing the clear. Apparently
this state change is enough to trigger the required TS cache flush. As
the BLT engine is completely asychronous, we also need a few more stall
states to synchronize the flush with the frontend.
Root-caused-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Walter Lozano <walter.lozano@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35556bed83 upstream.
When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.
This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".
Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses
Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bce1305c0e upstream.
It appears that a ReportSize value of zero is legal, even if a bit
non-sensical. Most of the HID code seems to handle that gracefully,
except when computing the total size in bytes. When fed as input to
memset, this leads to some funky outcomes.
Detect the corner case and correctly compute the size.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 3B doesn't have the flow control signals connected to the BT modem,
which limits the maximum usable baud rate to below 1 Mbaud. Use
921600 as a relatively safe default value, but the krnbt_baudrate
parameter can still override it.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Display variants are intended as a replacement for the now-deleted
fbtft_device drivers. Drivers can register additional compatible
strings with a custom callback that can make the required changes
to the fbtft_display structure.
Start the ball rolling by adding adafruit18, adafruit18_green and
sainsmart18 displays.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
commit e4a42c82e9 upstream.
Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp.
GZIP, BZIP2, LZOP env variables are reserved by the tools. The original
attempt to redefine them internally doesn't work in makefiles/scripts
intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in
broken builds. There can be other broken build commands because of this,
so the universal solution is to use non-reserved env variables for the
compression tools.
Fixes: 8dfb61dcba ("kbuild: add variables for compression tools")
Signed-off-by: Denis Efremov <efremov@linux.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8dfb61dcba upstream.
Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2
Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.
The credit goes to @grsecurity.
As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f276031b4e upstream.
This comment block explains why include/generated/compile.h is omitted,
but nothing about include/generated/autoconf.h, which might be more
difficult to understand. Add more comments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1463f74f49 upstream.
'pushd' ... 'popd' is the last bash-specific code in this script.
One way to avoid it is to run the code in a sub-shell.
With that addressed, you can run this script with sh.
I replaced $(BASH) with $(CONFIG_SHELL), and I changed the hashbang
to #!/bin/sh.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea79e5168b upstream.
This script copies headers by the cpio command twice; first from
srctree, and then from objtree. However, when we building in-tree,
we know the srctree and the objtree are the same. That is, all the
headers copied by the first cpio are overwritten by the second one.
Skip the first cpio when we are building in-tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e11773e76 upstream.
This script computes md5sum of headers in srctree and in objtree.
However, when we are building in-tree, we know the srctree and the
objtree are the same. That is, we end up with the same computation
twice. In fact, the first two lines of kernel/kheaders.md5 are always
the same for in-tree builds.
Unify the two md5sum calculations.
For in-tree builds ($building_out_of_srctree is empty), we check
only two directories, "include", and "arch/$SRCARCH/include".
For out-of-tree builds ($building_out_of_srctree is 1), we check
4 directories, "$srctree/include", "$srctree/arch/$SRCARCH/include",
"include", and "arch/$SRCARCH/include" since we know they are all
different.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a06635718 upstream.
The 'head' and 'tail' commands can take a file path directly.
So, you do not need to run 'cat'.
cat kernel/kheaders.md5 | head -1
... is equivalent to:
head -1 kernel/kheaders.md5
and the latter saves forking one process.
While I was here, I replaced 'head -1' with 'head -n 1'.
I also replaced '==' with '=' since we do not have a good reason to
use the bashism.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d2ee3ff79e ]
The usb_request->zero doesn't apply for isoc. Also, if we prepare a
0-length (ZLP) TRB for the OUT direction, we need to prepare an extra
TRB to pad up to the MPS alignment. Use the same bounce buffer for the
ZLP TRB and the extra pad TRB.
Cc: <stable@vger.kernel.org> # v4.5+
Fixes: d6e5a549cc ("usb: dwc3: simplify ZLP handling")
Fixes: 04c03d10e5 ("usb: dwc3: gadget: handle request->zero")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d187c0454 ]
The SG list may be set up with entry size more than the requested
length. Check the usb_request->length and make sure that we don't setup
the TRBs to send/receive more than requested. This case may occur when
the SG entry is allocated up to a certain minimum size, but the request
length is less than that. It can also occur when the request is reused
for a different request length.
Cc: <stable@vger.kernel.org> # v4.18+
Fixes: a31e63b608 ("usb: dwc3: gadget: Correct handling of scattergather lists")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f4b9d8a582 upstream.
Clang static analysis reports this error
cdc-acm.c:409:3: warning: Use of memory after it is freed
acm_process_notification(acm, (unsigned char *)dr);
There are three problems, the first one is that dr is not reset
The variable dr is set with
if (acm->nb_index)
dr = (struct usb_cdc_notification *)acm->notification_buffer;
But if the notification_buffer is too small it is resized with
if (acm->nb_size) {
kfree(acm->notification_buffer);
acm->nb_size = 0;
}
alloc_size = roundup_pow_of_two(expected_size);
/*
* kmalloc ensures a valid notification_buffer after a
* use of kfree in case the previous allocation was too
* small. Final freeing is done on disconnect.
*/
acm->notification_buffer =
kmalloc(alloc_size, GFP_ATOMIC);
dr should point to the new acm->notification_buffer.
The second problem is any data in the notification_buffer is lost
when the pointer is freed. In the normal case, the current data
is accumulated in the notification_buffer here.
memcpy(&acm->notification_buffer[acm->nb_index],
urb->transfer_buffer, copy_size);
When a resize happens, anything before
notification_buffer[acm->nb_index] is garbage.
The third problem is the acm->nb_index is not reset on a
resizing buffer error.
So switch resizing to using krealloc and reassign dr and
reset nb_index.
Fixes: ea2583529c ("cdc-acm: reassemble fragmented notifications")
Signed-off-by: Tom Rix <trix@redhat.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200801152154.20683-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b74b0a04d upstream.
Some values extracted by ncm_unwrap_ntb() could possibly lead to several
different out of bounds reads of memory. Specifically the values passed
to netdev_alloc_skb_ip_align() need to be checked so that memory is not
overflowed.
Resolve this by applying bounds checking to a number of different
indexes and lengths of the structure parsing logic.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1cd1b65af upstream.
size can potentially hold an overflowed value if its assigned expression
is left unchecked, leading to a smaller than needed allocation when
vla_group_size() is used by callers to allocate memory.
To fix this, add a test for saturation before declaring variables and an
overflow check to (n) * sizeof(type).
If the expression results in overflow, vla_group_size() will return SIZE_MAX.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 068834a277 upstream.
The Sound Devices MixPre-D audio card suffers from the same defect
as the Sound Devices USBPre2: an endpoint shared between a normal
audio interface and a vendor-specific interface, in violation of the
USB spec. Since the USB core now treats duplicated endpoints as bugs
and ignores them, the audio endpoint isn't available and the card
can't be used for audio capture.
Along the same lines as commit bdd1b147b8 ("USB: quirks: blacklist
duplicate ep on Sound Devices USBPre2"), this patch adds a quirks
entry saying to ignore ep5in for interface 1, leaving it available for
use with standard audio interface 2.
Reported-and-tested-by: Jean-Christophe Barnoud <jcbarnoud@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Fixes: 3e4f8e21c4 ("USB: core: fix check for duplicate endpoints")
Link: https://lore.kernel.org/r/20200826194624.GA412633@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2bf3723db upstream.
[Why]
DC uses these to raise the voltage as needed for higher dispclk/dppclk
and to ensure that we have enough bandwidth to drive the displays.
There's a bug preventing these from actuially sending messages since
it's checking the actual clock (which is 0) instead of the incoming
clock (which shouldn't be 0) when deciding to send the hardmin.
[How]
Check the clocks != 0 instead of the actual clocks.
Fixes: 9ed9203c3e ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e579076ac0 upstream.
In the current code, when the eoi callback of the exti clears the pending
bit of the current interrupt, it will first read the values of fpr and
rpr, then logically OR the corresponding bit of the interrupt number,
and finally write back to fpr and rpr.
We found through experiments that if two exti interrupts,
we call them int1/int2, arrive almost at the same time. in our scenario,
the time difference is 30 microseconds, assuming int1 is triggered first.
there will be an extreme scenario: both int's pending bit are set to 1,
the irq handle of int1 is executed first, and eoi handle is then executed,
at this moment, all pending bits are cleared, but the int 2 has not
finally been reported to the cpu yet, which eventually lost int2.
According to stm32's TRM description about rpr and fpr: Writing a 1 to this
bit will trigger a rising edge event on event x, Writing 0 has no
effect.
Therefore, when clearing the pending bit, we only need to clear the
pending bit of the irq.
Fixes: 927abfc446 ("irqchip/stm32: Add stm32mp1 support with hierarchy domain")
Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org # v4.18+
Link: https://lore.kernel.org/r/20200820031629.15582-1-qiuguorui1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 784a083037 upstream.
Most of the CPU mask operations behave the same way, but for_each_cpu() and
it's variants ignore the cpumask argument and claim that CPU0 is always in
the mask. This is historical, inconsistent and annoying behaviour.
The matrix allocator uses for_each_cpu() and can be called on UP with an
empty cpumask. The calling code does not expect that this succeeds but
until commit e027fffff7 ("x86/irq: Unbreak interrupt affinity setting")
this went unnoticed. That commit added a WARN_ON() to catch cases which
move an interrupt from one vector to another on the same CPU. The warning
triggers on UP.
Add a check for the cpumask being empty to prevent this.
Fixes: 2f75d9e1c9 ("genirq: Implement bitmap matrix allocator")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c195d66a8a upstream.
The iwd daemon uses libell which sets up the skcipher operation with
two separate control messages. As the first control message is sent
without MSG_MORE, it is interpreted as an empty request.
While libell should be fixed to use MSG_MORE where appropriate, this
patch works around the bug in the kernel so that existing binaries
continue to work.
We will print a warning however.
A separate issue is that the new kernel code no longer allows the
control message to be sent twice within the same request. This
restriction is obviously incompatible with what iwd was doing (first
setting an IV and then sending the real control message). This
patch changes the kernel so that this is explicitly allowed.
Reported-by: Caleb Jorden <caljorden@hotmail.com>
Fixes: f3c802a1f3 ("crypto: algif_aead - Only wake up when...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c15e1bdda4 upstream.
When the primary firmware node pointer is removed from a
device (set to NULL) the secondary firmware node pointer,
when it exists, is made the primary node for the device.
However, the secondary firmware node pointer of the original
primary firmware node is never cleared (set to NULL).
To avoid situation where the secondary firmware node pointer
is pointing to a non-existing object, clearing it properly
when the primary node is removed from a device in
set_primary_fwnode().
Fixes: 97badf873a ("device property: Make it possible to use secondary firmware nodes")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b460b51241 upstream.
The bhrb_filter_map ("The Branch History Rolling Buffer") callback is
only defined in raw CPUs' power_pmu structs. The "architected" CPUs
use generic_compat_pmu, which does not have this callback, and crashes
occur if a user tries to enable branch stack for an event.
This add a NULL pointer check for bhrb_filter_map() which behaves as
if the callback returned an error.
This does not add the same check for config_bhrb() as the only caller
checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0.
Fixes: be80e758d0 ("powerpc/perf: Add generic compat mode pmu driver")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602025612.62707-1-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3eb6e8fba upstream.
It has been reported that system-wide suspend may be aborted in the
absence of any wakeup events due to unforseen interactions of it with
the runtume PM framework.
One failing scenario is when there are multiple devices sharing an
ACPI power resource and runtime-resume needs to be carried out for
one of them during system-wide suspend (for example, because it needs
to be reconfigured before the whole system goes to sleep). In that
case, the runtime-resume of that device involves turning the ACPI
power resource "on" which in turn causes runtime-resume requests
to be queued up for all of the other devices sharing it. Those
requests go to the runtime PM workqueue which is frozen during
system-wide suspend, so they are not actually taken care of until
the resume of the whole system, but the pm_runtime_barrier()
call in __device_suspend() sees them and triggers system wakeup
events for them which then cause the system-wide suspend to be
aborted if wakeup source objects are in active use.
Of course, the logic that leads to triggering those wakeup events is
questionable in the first place, because clearly there are cases in
which a pending runtime resume request for a device is not connected
to any real wakeup events in any way (like the one above). Moreover,
it is racy, because the device may be resuming already by the time
the pm_runtime_barrier() runs and so if the driver doesn't take care
of signaling the wakeup event as appropriate, it will be lost.
However, if the driver does take care of that, the extra
pm_wakeup_event() call in the core is redundant.
Accordingly, drop the conditional pm_wakeup_event() call fron
__device_suspend() and make the latter call pm_runtime_barrier()
alone. Also modify the comment next to that call to reflect the new
code and extend it to mention the need to avoid unwanted interactions
between runtime PM and system-wide device suspend callbacks.
Fixes: 1e2ef05bb8 ("PM: Limit race conditions between runtime PM and system sleep (v2)")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Tested-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1ec7ae6c9 upstream.
Some device drivers call libusb_clear_halt when target ep queue
is not empty. (eg. spice client connected to qemu for usb redir)
Before commit f5249461b5 ("xhci: Clear the host side toggle
manually when endpoint is soft reset"), that works well.
But now, we got the error log:
EP not empty, refuse reset
xhci_endpoint_reset failed and left ep_state's EP_SOFT_CLEAR_TOGGLE
bit still set
So all the subsequent urb sumbits to the ep will fail with the
warn log:
Can't enqueue URB while manually clearing toggle
We need to clear ep_state EP_SOFT_CLEAR_TOGGLE bit after
xhci_endpoint_reset, even if it failed.
Fixes: f5249461b5 ("xhci: Clear the host side toggle manually when endpoint is soft reset")
Cc: stable <stable@vger.kernel.org> # v4.17+
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200821091549.20556-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 904df64a5f upstream.
Sometimes re-plugging a USB device during system sleep renders the device
useless:
[ 173.418345] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x14203e2, return 0x10262
...
[ 176.496485] usb 2-4: Waited 2000ms for CONNECT
[ 176.496781] usb usb2-port4: status 0000.0262 after resume, -19
[ 176.497103] usb 2-4: can't resume, status -19
[ 176.497438] usb usb2-port4: logical disconnect
Because PLS equals to XDEV_RESUME, xHCI driver reports U3 to usbcore,
despite of CAS bit is flagged.
So proritize CAS over XDEV_RESUME to let usbcore handle warm-reset for
the port.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200821091549.20556-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c330fb1ddc upstream.
handler data is meant for interrupt handlers and not for storing irq chip
specific information as some devices require handler data to store internal
per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers.
This obviously creates a conflict of interests and crashes the machine
because the XEN pointer is overwritten by the driver pointer.
As the XEN data is not handler specific it should be stored in
irqdesc::irq_data::chip_data instead.
A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that.
Cc: stable@vger.kernel.org
Reported-by: Roman Shaposhnik <roman@zededa.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Roman Shaposhnik <roman@zededa.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9cae926f3 upstream.
When we are processing writeback for sync(2), move_expired_inodes()
didn't set any inode expiry value (older_than_this). This can result in
writeback never completing if there's steady stream of inodes added to
b_dirty_time list as writeback rechecks dirty lists after each writeback
round whether there's more work to be done. Fix the problem by using
sync(2) start time is inode expiry value when processing b_dirty_time
list similarly as for ordinarily dirtied inodes. This requires some
refactoring of older_than_this handling which simplifies the code
noticeably as a bonus.
Fixes: 0ae45f63d4 ("vfs: add support for a lazytime mount option")
CC: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5afced3bf2 upstream.
Inode's i_io_list list head is used to attach inode to several different
lists - wb->{b_dirty, b_dirty_time, b_io, b_more_io}. When flush worker
prepares a list of inodes to writeback e.g. for sync(2), it moves inodes
to b_io list. Thus it is critical for sync(2) data integrity guarantees
that inode is not requeued to any other writeback list when inode is
queued for processing by flush worker. That's the reason why
writeback_single_inode() does not touch i_io_list (unless the inode is
completely clean) and why __mark_inode_dirty() does not touch i_io_list
if I_SYNC flag is set.
However there are two flaws in the current logic:
1) When inode has only I_DIRTY_TIME set but it is already queued in b_io
list due to sync(2), concurrent __mark_inode_dirty(inode, I_DIRTY_SYNC)
can still move inode back to b_dirty list resulting in skipping
writeback of inode time stamps during sync(2).
2) When inode is on b_dirty_time list and writeback_single_inode() races
with __mark_inode_dirty() like:
writeback_single_inode() __mark_inode_dirty(inode, I_DIRTY_PAGES)
inode->i_state |= I_SYNC
__writeback_single_inode()
inode->i_state |= I_DIRTY_PAGES;
if (inode->i_state & I_SYNC)
bail
if (!(inode->i_state & I_DIRTY_ALL))
- not true so nothing done
We end up with I_DIRTY_PAGES inode on b_dirty_time list and thus
standard background writeback will not writeback this inode leading to
possible dirty throttling stalls etc. (thanks to Martijn Coenen for this
analysis).
Fix these problems by tracking whether inode is queued in b_io or
b_more_io lists in a new I_SYNC_QUEUED flag. When this flag is set, we
know flush worker has queued inode and we should not touch i_io_list.
On the other hand we also know that once flush worker is done with the
inode it will requeue the inode to appropriate dirty list. When
I_SYNC_QUEUED is not set, __mark_inode_dirty() can (and must) move inode
to appropriate dirty list.
Reported-by: Martijn Coenen <maco@android.com>
Reviewed-by: Martijn Coenen <maco@android.com>
Tested-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 0ae45f63d4 ("vfs: add support for a lazytime mount option")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b35250c081 upstream.
Currently, operations on inode->i_io_list are protected by
wb->list_lock. In the following patches we'll need to maintain
consistency between inode->i_state and inode->i_io_list so change the
code so that inode->i_lock protects also all inode's i_io_list handling.
Reviewed-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: stable@vger.kernel.org # Prerequisite for "writeback: Avoid skipping inode writeback"
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6b9e95dde upstream.
The following in 8250_exar.c line 589 is used to determine the number
of ports for each Exar board:
nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f;
If the number of ports a card has is not explicitly specified, it defaults
to the rightmost 4 bits of the PCI device ID. This is prone to error since
not all PCI device IDs contain a number which corresponds to the number of
ports that card provides.
This particular case involves COMMTECH_4222PCIE, COMMTECH_4224PCIE and
COMMTECH_4228PCIE cards with device IDs 0x0022, 0x0020 and 0x0021.
Currently the multiport cards receive 2, 0 and 1 port instead of 2, 4 and
8 ports respectively.
To fix this, each Commtech Fastcom PCIe card is given a struct where the
number of ports is explicitly specified. This ensures 'board->num_ports'
is used instead of the default 'pcidev->device & 0x0f'.
Fixes: d0aeaa83f0 ("serial: exar: split out the exar code from 8250_pci")
Signed-off-by: Valmer Huhn <valmer.huhn@concurrent-rt.com>
Tested-by: Valmer Huhn <valmer.huhn@concurrent-rt.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200813165255.GC345440@icarus.concurrent-rt.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdf16d7894 upstream.
stm32_init_port() of the stm32-usart may trigger a warning in
platform_get_irq() when the device tree specifies no wakeup interrupt.
The wakeup interrupt is usually a board-specific GPIO and the driver
functions correctly in its absence. The mainline stm32mp151.dtsi does
not specify it, so all mainline device trees trigger an unnecessary
kernel warning. Use of platform_get_irq_optional() avoids this.
Fixes: 2c58e56096 ("serial: stm32: fix the get_irq error case")
Signed-off-by: Holger Assmann <h.assmann@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200813152757.32751-1-h.assmann@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89efbe70b2 upstream.
pl011_probe() calls pl011_setup_port() to reserve an amba_ports[] entry,
then calls pl011_register_port() to register the uart driver with the
tty layer.
If registration of the uart driver fails, the amba_ports[] entry is not
released. If this happens 14 times (value of UART_NR macro), then all
amba_ports[] entries will have been leaked and driver probing is no
longer possible. (To be fair, that can only happen if the DeviceTree
doesn't contain alias IDs since they cause the same entry to be used for
a given port.) Fix it.
Fixes: ef2889f7ff ("serial: pl011: Move uart_register_driver call to device")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.15+
Cc: Tushar Behera <tushar.behera@linaro.org>
Link: https://lore.kernel.org/r/138f8c15afb2f184d8102583f8301575566064a6.1597316167.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27afac93e3 upstream.
If probing of a pl011 gets deferred until after free_initmem(), an oops
ensues because pl011_console_match() is called which has been freed.
Fix by removing the __init attribute from the function and those it
calls.
Commit 10879ae5f1 ("serial: pl011: add console matching function")
introduced pl011_console_match() not just for early consoles but
regular preferred consoles, such as those added by acpi_parse_spcr().
Regular consoles may be registered after free_initmem() for various
reasons, one being deferred probing, another being dynamic enablement
of serial ports using a DeviceTree overlay.
Thus, pl011_console_match() must not be declared __init and the
functions it calls mustn't either.
Stack trace for posterity:
Unable to handle kernel paging request at virtual address 80c38b58
Internal error: Oops: 8000000d [#1] PREEMPT SMP ARM
PC is at pl011_console_match+0x0/0xfc
LR is at register_console+0x150/0x468
[<80187004>] (register_console)
[<805a8184>] (uart_add_one_port)
[<805b2b68>] (pl011_register_port)
[<805b3ce4>] (pl011_probe)
[<80569214>] (amba_probe)
[<805ca088>] (really_probe)
[<805ca2ec>] (driver_probe_device)
[<805ca5b0>] (__device_attach_driver)
[<805c8060>] (bus_for_each_drv)
[<805c9dfc>] (__device_attach)
[<805ca630>] (device_initial_probe)
[<805c90a8>] (bus_probe_device)
[<805c95a8>] (deferred_probe_work_func)
Fixes: 10879ae5f1 ("serial: pl011: add console matching function")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.10+
Cc: Aleksey Makarov <amakarov@marvell.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Christopher Covington <cov@codeaurora.org>
Link: https://lore.kernel.org/r/f827ff09da55b8c57d316a1b008a137677b58921.1597315557.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c6c378b0c upstream.
In few older Samsung SoCs like s3c2410, s3c2412
and s3c2440, UART IP is having 2 interrupt lines.
However, in other SoCs like s3c6400, s5pv210,
exynos5433, and exynos4210 UART is having only 1
interrupt line. Due to this, "platform_get_irq(platdev, 1)"
call in the driver gives the following false-positive error:
"IRQ index 1 not found" on newer SoC's.
This patch adds the condition to check for Tx interrupt
only for the those SoC's which have 2 interrupt lines.
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Tamseel Shams <m.shams@samsung.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200810030021.45348-1-m.shams@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a84d5d429f upstream.
can_nocow_extent and btrfs_cross_ref_exist both rely on a heuristic for
detecting a must cow condition which is not exactly accurate, but saves
unnecessary tree traversal. The incorrect assumption is that if the
extent was created in a generation smaller than the last snapshot
generation, it must be referenced by that snapshot. That is true, except
the snapshot could have since been deleted, without affecting the last
snapshot generation.
The original patch claimed a performance win from this check, but it
also leads to a bug where you are unable to use a swapfile if you ever
snapshotted the subvolume it's in. Make the check slower and more strict
for the swapon case, without modifying the general cow checks as a
compromise. Turning swap on does not seem to be a particularly
performance sensitive operation, so incurring a possibly unnecessary
btrfs_search_slot seems worthwhile for the added usability.
Note: Until the snapshot is competely cleaned after deletion,
check_committed_refs will still cause the logic to think that cow is
necessary, so the user must until 'btrfs subvolu sync' finished before
activating the swapfile swapon.
CC: stable@vger.kernel.org # 5.4+
Suggested-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbc37d6e47 upstream.
If a transaction aborts it can cause a memory leak of the pages array of
a block group's io_ctl structure. The following steps explain how that can
happen:
1) Transaction N is committing, currently in state TRANS_STATE_UNBLOCKED
and it's about to start writing out dirty extent buffers;
2) Transaction N + 1 already started and another task, task A, just called
btrfs_commit_transaction() on it;
3) Block group B was dirtied (extents allocated from it) by transaction
N + 1, so when task A calls btrfs_start_dirty_block_groups(), at the
very beginning of the transaction commit, it starts writeback for the
block group's space cache by calling btrfs_write_out_cache(), which
allocates the pages array for the block group's io_ctl with a call to
io_ctl_init(). Block group A is added to the io_list of transaction
N + 1 by btrfs_start_dirty_block_groups();
4) While transaction N's commit is writing out the extent buffers, it gets
an IO error and aborts transaction N, also setting the file system to
RO mode;
5) Task A has already returned from btrfs_start_dirty_block_groups(), is at
btrfs_commit_transaction() and has set transaction N + 1 state to
TRANS_STATE_COMMIT_START. Immediately after that it checks that the
filesystem was turned to RO mode, due to transaction N's abort, and
jumps to the "cleanup_transaction" label. After that we end up at
btrfs_cleanup_one_transaction() which calls btrfs_cleanup_dirty_bgs().
That helper finds block group B in the transaction's io_list but it
never releases the pages array of the block group's io_ctl, resulting in
a memory leak.
In fact at the point when we are at btrfs_cleanup_dirty_bgs(), the pages
array points to pages that were already released by us at
__btrfs_write_out_cache() through the call to io_ctl_drop_pages(). We end
up freeing the pages array only after waiting for the ordered extent to
complete through btrfs_wait_cache_io(), which calls io_ctl_free() to do
that. But in the transaction abort case we don't wait for the space cache's
ordered extent to complete through a call to btrfs_wait_cache_io(), so
that's why we end up with a memory leak - we wait for the ordered extent
to complete indirectly by shutting down the work queues and waiting for
any jobs in them to complete before returning from close_ctree().
We can solve the leak simply by freeing the pages array right after
releasing the pages (with the call to io_ctl_drop_pages()) at
__btrfs_write_out_cache(), since we will never use it anymore after that
and the pages array points to already released pages at that point, which
is currently not a problem since no one will use it after that, but not a
good practice anyway since it can easily lead to use-after-free issues.
So fix this by freeing the pages array right after releasing the pages at
__btrfs_write_out_cache().
This issue can often be reproduced with test case generic/475 from fstests
and kmemleak can detect it and reports it with the following trace:
unreferenced object 0xffff9bbf009fa600 (size 512):
comm "fsstress", pid 38807, jiffies 4298504428 (age 22.028s)
hex dump (first 32 bytes):
00 a0 7c 4d 3d ed ff ff 40 a0 7c 4d 3d ed ff ff ..|M=...@.|M=...
80 a0 7c 4d 3d ed ff ff c0 a0 7c 4d 3d ed ff ff ..|M=.....|M=...
backtrace:
[<00000000f4b5cfe2>] __kmalloc+0x1a8/0x3e0
[<0000000028665e7f>] io_ctl_init+0xa7/0x120 [btrfs]
[<00000000a1f95b2d>] __btrfs_write_out_cache+0x86/0x4a0 [btrfs]
[<00000000207ea1b0>] btrfs_write_out_cache+0x7f/0xf0 [btrfs]
[<00000000af21f534>] btrfs_start_dirty_block_groups+0x27b/0x580 [btrfs]
[<00000000c3c23d44>] btrfs_commit_transaction+0xa6f/0xe70 [btrfs]
[<000000009588930c>] create_subvol+0x581/0x9a0 [btrfs]
[<000000009ef2fd7f>] btrfs_mksubvol+0x3fb/0x4a0 [btrfs]
[<00000000474e5187>] __btrfs_ioctl_snap_create+0x119/0x1a0 [btrfs]
[<00000000708ee349>] btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs]
[<00000000ea60106f>] btrfs_ioctl+0x12c/0x3130 [btrfs]
[<000000005c923d6d>] __x64_sys_ioctl+0x83/0xb0
[<0000000043ace2c9>] do_syscall_64+0x33/0x80
[<00000000904efbce>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb2fecbad5 upstream.
With my new locking code dbench is so much faster that I tripped over a
transaction abort from ENOSPC. This turned out to be because
btrfs_del_dir_entries_in_log was checking for ret == -ENOSPC, but this
function sets err on error, and returns err. So instead of properly
marking the inode as needing a full commit, we were returning -ENOSPC
and aborting in __btrfs_unlink_inode. Fix this by checking the proper
variable so that we return the correct thing in the case of ENOSPC.
The ENOENT needs to be checked, because btrfs_lookup_dir_item_index()
can return -ENOENT if the dir item isn't in the tree log (which would
happen if we hadn't fsync'ed this guy). We actually handle that case in
__btrfs_unlink_inode, so it's an expected error to get back.
Fixes: 4a500fd178 ("Btrfs: Metadata ENOSPC handling for tree log")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note and comment about ENOENT ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 282dd7d771 upstream.
Currently a user can set mount "-o compress" which will set the
compression algorithm to zlib, and use the default compress level for
zlib (3):
relatime,compress=zlib:3,space_cache
If the user remounts the fs using "-o compress=lzo", then the old
compress_level is used:
relatime,compress=lzo:3,space_cache
But lzo does not expose any tunable compression level. The same happens
if we set any compress argument with different level, also with zstd.
Fix this by resetting the compress_level when compress=lzo is
specified. With the fix applied, lzo is shown without compress level:
relatime,compress=lzo,space_cache
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7d8535f37 upstream.
SCHED_RESTART code path is relied to re-run queue for dispatch requests
in hctx->dispatch. Meantime the SCHED_RSTART flag is checked when adding
requests to hctx->dispatch.
memory barriers have to be used for ordering the following two pair of OPs:
1) adding requests to hctx->dispatch and checking SCHED_RESTART in
blk_mq_dispatch_rq_list()
2) clearing SCHED_RESTART and checking if there is request in hctx->dispatch
in blk_mq_sched_restart().
Without the added memory barrier, either:
1) blk_mq_sched_restart() may miss requests added to hctx->dispatch meantime
blk_mq_dispatch_rq_list() observes SCHED_RESTART, and not run queue in
dispatch side
or
2) blk_mq_dispatch_rq_list still sees SCHED_RESTART, and not run queue
in dispatch side, meantime checking if there is request in
hctx->dispatch from blk_mq_sched_restart() is missed.
IO hang in ltp/fs_fill test is reported by kernel test robot:
https://lkml.org/lkml/2020/7/26/77
Turns out it is caused by the above out-of-order OPs. And the IO hang
can't be observed any more after applying this patch.
Fixes: bd166ef183 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eef4016243 upstream.
Before this commit i2c_hid_parse() consists of the following steps:
1. Send power on cmd
2. usleep_range(1000, 5000)
3. Send reset cmd
4. Wait for reset to complete (device interrupt, or msleep(100))
5. Send power on cmd
6. Try to read HID descriptor
Notice how there is an usleep_range(1000, 5000) after the first power-on
command, but not after the second power-on command.
Testing has shown that at least on the BMAX Y13 laptop's i2c-hid touchpad,
not having a delay after the second power-on command causes the HID
descriptor to read as all zeros.
In case we hit this on other devices too, the descriptor being all zeros
can be recognized by the following message being logged many, many times:
hid-generic 0018:0911:5288.0002: unknown main item tag 0x0
At the same time as the BMAX Y13's touchpad issue was debugged,
Kai-Heng was working on debugging some issues with Goodix i2c-hid
touchpads. It turns out that these need a delay after a PWR_ON command
too, otherwise they stop working after a suspend/resume cycle.
According to Goodix a delay of minimal 60ms is needed.
Having multiple cases where we need a delay after sending the power-on
command, seems to indicate that we should always sleep after the power-on
command.
This commit fixes the mentioned issues by moving the existing 1ms sleep to
the i2c_hid_set_power() function and changing it to a 60ms sleep.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208247
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-and-tested-by: Andrea Borgia <andrea@borgia.bo.it>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcb21c8cc9 upstream.
In case of block device backend, if the backend supports write zeros, the
loop device will set queue flag of QUEUE_FLAG_DISCARD. However,
limits.discard_granularity isn't setup, and this way is wrong,
see the following description in Documentation/ABI/testing/sysfs-block:
A discard_granularity of 0 means that the device does not support
discard functionality.
Especially 9b15d109a6 ("block: improve discard bio alignment in
__blkdev_issue_discard()") starts to take q->limits.discard_granularity
for computing max discard sectors. And zero discard granularity may cause
kernel oops, or fail discard request even though the loop queue claims
discard support via QUEUE_FLAG_DISCARD.
Fix the issue by setup discard granularity and alignment.
Fixes: c52abf5630 ("loop: Better discard support for block devices")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Xiao Ni <xni@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Evan Green <evgreen@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4b469c66f upstream.
A previous commit aligning splits to physical block sizes inadvertently
modified one return case such that that it now returns 0 length splits
when the number of sectors doesn't exceed the physical offset. This
later hits a BUG in bio_split(). Restore the previous working behavior.
Fixes: 9cc5169cd4 ("block: Improve physical block alignment of split bios")
Reported-by: Eric Deal <eric.deal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17899eaf88 ]
Performance monitor interrupt handler checks if any counter has
overflown and calls record_and_restart() in core-book3s which invokes
perf_event_overflow() to record the sample information. Apart from
creating sample, perf_event_overflow() also does the interrupt and
period checks via perf_event_account_interrupt().
Currently we record information only if the SIAR (Sampled Instruction
Address Register) valid bit is set (using siar_valid() check) and
hence the interrupt check.
But it is possible that we do sampling for some events that are not
generating valid SIAR, and hence there is no chance to disable the
event if interrupts are more than max_samples_per_tick. This leads to
soft lockup.
Fix this by adding perf_event_account_interrupt() in the invalid SIAR
code path for a sampling event. ie if SIAR is invalid, just do
interrupt check and don't record the sample information.
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 989e4da042 ]
Every iteration of for_each_available_child_of_node() decrements
reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.
Fix a potential memory leak in gianfar.c by inserting of_node_put()
before the goto statement.
Issue found with Coccinelle.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b61fba503 ]
Remote source MAC addresses can be set on a 'source mode' macvlan
interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit
tightens the validation of these MAC addresses to match the validation
already performed when setting or adding a single MAC address via the
IFLA_MACVLAN_MACADDR attribute.
iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set'
command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command,
which demonstrates the inconsistent behaviour that this commit
addresses:
# ip link add link eth0 name macvlan0 type macvlan mode source
# ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00
RTNETLINK answers: Cannot assign requested address
# ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00
# ip -d link show macvlan0
5: macvlan0@eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 ...
link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0
macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ...
With this change, the 'set' command will (rightly) fail in the same way
as the 'add' command.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abb31aeaa9 ]
Multipath errors were seen during failback due to login timeout. The
remote device sent LOGO, the local host tore down the session and did
relogin. The RSCN arrived indicates remote device is going through failover
after which the relogin is in a 20s timeout phase. At this point the
driver is stuck in the relogin process. Add a fix to delete the session as
part of abort/flush the login.
Link: https://lore.kernel.org/r/20200806111014.28434-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b10178ee7f ]
If somehow no interrupt notification is raised for a completed request and
its doorbell bit is cleared by host, UFS driver needs to cleanup its
outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally
in the following scenario:
After ufshcd_abort() returns, this request will be requeued by SCSI layer
with its outstanding bit set. Any future completed request will trigger
ufshcd_transfer_req_compl() to handle all "completed outstanding bits". At
this time the "abnormal outstanding bit" will be detected and the "requeued
request" will be chosen to execute request post-processing flow. This is
wrong because this request is still "alive".
Link: https://lore.kernel.org/r/20200811141859.27399-2-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93b6c5db06 ]
In ufshcd_suspend(), after clk-gating is suspended and link is set
as Hibern8 state, ufshcd_hold() is still possibly invoked before
ufshcd_suspend() returns. For example, MediaTek's suspend vops may
issue UIC commands which would call ufshcd_hold() during the command
issuing flow.
Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled,
then ufshcd_hold() may enter infinite loops because there is no
clk-ungating work scheduled or pending. In this case, ufshcd_hold()
shall just bypass, and keep the link as Hibern8 state.
Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcf7ddb018 ]
h1 is initially configured to reach h2 via r1 rather than the
more direct path through r2. If rp_filter is set and inherited
for r2, forwarding fails since the source address of h1 is
reachable from eth0 vs the packet coming to it via r1 and eth1.
Since rp_filter setting affects the test, explicitly reset it.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f082bb59b7 ]
The driver supports WM1811, WM8994, WM8958 devices but according to
documentation and the regmap definitions the WM8958_DSP2_* registers
are only available on WM8958. In current code these registers are
being accessed as if they were available on all the three chips.
When starting playback on WM1811 CODEC multiple errors like:
"wm8994-codec wm8994-codec: ASoC: error at soc_component_read_no_lock on wm8994-codec: -5"
can be seen, which is caused by attempts to read an unavailable
WM8958_DSP2_PROGRAM register. The issue has been uncovered by recent
commit "e2329ee ASoC: soc-component: add soc_component_err()".
This patch adds a check in wm8958_aif_ev() callback so the DSP2 handling
is only done for WM8958.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200731173834.23832-1-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b8eb2ee9d ]
The scanning through subchannels during the time of an event could
take significant amount of time in case of platforms with lots of
known subchannels. This might result in higher scheduling latencies
for other tasks especially on systems with a single CPU. Add
cond_resched() call, as the loop in slow_eval_known_fn() can be
executed for a longer duration.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e052d05402 ]
Since the stack relays on receiving own packets, it was overwriting own
transmit buffer from received packets.
At least theoretically, the received echo buffer can be corrupt or
changed and the session partner can request to resend previous data. In
this case we will re-send bad data.
With this patch we will stop to overwrite own TX buffer and use it for
sanity checking.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-6-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2404b73c3f ]
nf_ct_frag6_gather is part of nf_defrag_ipv6.ko, not ipv6 core.
The current use of the netfilter ipv6 stub indirections causes a module
dependency between ipv6 and nf_defrag_ipv6.
This prevents nf_defrag_ipv6 module from being removed because ipv6 can't
be unloaded.
Remove the indirection and always use a direct call. This creates a
depency from nf_conntrack_bridge to nf_defrag_ipv6 instead:
modinfo nf_conntrack
depends: nf_conntrack,nf_defrag_ipv6,bridge
.. and nf_conntrack already depends on nf_defrag_ipv6 anyway.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abba907c7a ]
[Why]
Using FRAME_UPDATE will result in infopacket to be potentially updated
one frame late.
In commit stream scenarios for previously active stream, some stale
infopacket data from previous config might be erroneously sent out on
initial frame after stream is re-enabled.
[How]
Switch to using IMMEDIATE_UPDATE mode
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 135dd873d3 ]
The caller of stm32_spi_transfer_one(), spi_transfer_one_message(),
is waiting for us to call spi_finalize_current_transfer() and will
eventually schedule a new transfer, if available.
We should guarantee that the spi controller is really available
before calling spi_finalize_current_transfer().
Move the call to spi_finalize_current_transfer() _after_ the call
to stm32_spi_disable().
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-2-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 377254b2cd ]
If a device is hot-removed --- for example, when a physical device is
unplugged from pcie slot or a nbd device's network is shutdown ---
this can result in a BUG_ON() crash in submit_bh_wbc(). This is
because the when the block device dies, the buffer heads will have
their Buffer_Mapped flag get cleared, leading to the crash in
submit_bh_wbc.
We had attempted to work around this problem in commit a17712c8
("ext4: check superblock mapped prior to committing"). Unfortunately,
it's still possible to hit the BUG_ON(!buffer_mapped(bh)) if the
device dies between when the work-around check in ext4_commit_super()
and when submit_bh_wbh() is finally called:
Code path:
ext4_commit_super
judge if 'buffer_mapped(sbh)' is false, return <== commit a17712c8
lock_buffer(sbh)
...
unlock_buffer(sbh)
__sync_dirty_buffer(sbh,...
lock_buffer(sbh)
judge if 'buffer_mapped(sbh))' is false, return <== added by this patch
submit_bh(...,sbh)
submit_bh_wbc(...,sbh,...)
[100722.966497] kernel BUG at fs/buffer.c:3095! <== BUG_ON(!buffer_mapped(bh))' in submit_bh_wbc()
[100722.966503] invalid opcode: 0000 [#1] SMP
[100722.966566] task: ffff8817e15a9e40 task.stack: ffffc90024744000
[100722.966574] RIP: 0010:submit_bh_wbc+0x180/0x190
[100722.966575] RSP: 0018:ffffc90024747a90 EFLAGS: 00010246
[100722.966576] RAX: 0000000000620005 RBX: ffff8818a80603a8 RCX: 0000000000000000
[100722.966576] RDX: ffff8818a80603a8 RSI: 0000000000020800 RDI: 0000000000000001
[100722.966577] RBP: ffffc90024747ac0 R08: 0000000000000000 R09: ffff88207f94170d
[100722.966578] R10: 00000000000437c8 R11: 0000000000000001 R12: 0000000000020800
[100722.966578] R13: 0000000000000001 R14: 000000000bf9a438 R15: ffff88195f333000
[100722.966580] FS: 00007fa2eee27700(0000) GS:ffff88203d840000(0000) knlGS:0000000000000000
[100722.966580] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[100722.966581] CR2: 0000000000f0b008 CR3: 000000201a622003 CR4: 00000000007606e0
[100722.966582] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[100722.966583] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[100722.966583] PKRU: 55555554
[100722.966583] Call Trace:
[100722.966588] __sync_dirty_buffer+0x6e/0xd0
[100722.966614] ext4_commit_super+0x1d8/0x290 [ext4]
[100722.966626] __ext4_std_error+0x78/0x100 [ext4]
[100722.966635] ? __ext4_journal_get_write_access+0xca/0x120 [ext4]
[100722.966646] ext4_reserve_inode_write+0x58/0xb0 [ext4]
[100722.966655] ? ext4_dirty_inode+0x48/0x70 [ext4]
[100722.966663] ext4_mark_inode_dirty+0x53/0x1e0 [ext4]
[100722.966671] ? __ext4_journal_start_sb+0x6d/0xf0 [ext4]
[100722.966679] ext4_dirty_inode+0x48/0x70 [ext4]
[100722.966682] __mark_inode_dirty+0x17f/0x350
[100722.966686] generic_update_time+0x87/0xd0
[100722.966687] touch_atime+0xa9/0xd0
[100722.966690] generic_file_read_iter+0xa09/0xcd0
[100722.966694] ? page_cache_tree_insert+0xb0/0xb0
[100722.966704] ext4_file_read_iter+0x4a/0x100 [ext4]
[100722.966707] ? __inode_security_revalidate+0x4f/0x60
[100722.966709] __vfs_read+0xec/0x160
[100722.966711] vfs_read+0x8c/0x130
[100722.966712] SyS_pread64+0x87/0xb0
[100722.966716] do_syscall_64+0x67/0x1b0
[100722.966719] entry_SYSCALL64_slow_path+0x25/0x25
To address this, add the check of 'buffer_mapped(bh)' to
__sync_dirty_buffer(). This also has the benefit of fixing this for
other file systems.
With this addition, we can drop the workaround in ext4_commit_supper().
[ Commit description rewritten by tytso. ]
Signed-off-by: Xianting Tian <xianting_tian@126.com>
Link: https://lore.kernel.org/r/1596211825-8750-1-git-send-email-xianting_tian@126.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f5bde1db1 ]
When remounting filesystem fails late during remount handling and
block_validity mount option is also changed during the remount, we fail
to restore system zone information to a state matching the mount option.
This is mostly harmless, just the block validity checking will not match
the situation described by the mount option. Make sure these two are always
consistent.
Reported-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-7-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f25391ebb4 ]
Currently there is a problem with mount options that can be both set by
vfs using mount flags or by a string parsing in ext4.
i_version/iversion options gets lost after remount, for example
$ mount -o i_version /dev/pmem0 /mnt
$ grep pmem0 /proc/self/mountinfo | grep i_version
310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,seclabel,i_version
$ mount -o remount,ro /mnt
$ grep pmem0 /proc/self/mountinfo | grep i_version
nolazytime gets ignored by ext4 on remount, for example
$ mount -o lazytime /dev/pmem0 /mnt
$ grep pmem0 /proc/self/mountinfo | grep lazytime
310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,lazytime,seclabel
$ mount -o remount,nolazytime /mnt
$ grep pmem0 /proc/self/mountinfo | grep lazytime
310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,lazytime,seclabel
Fix it by applying the SB_LAZYTIME and SB_I_VERSION flags from *flags to
s_flags before we parse the option and use the resulting state of the
same flags in *flags at the end of successful remount.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200723150526.19931-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c044f3d836 ]
If we free a metadata buffer which has been failed to async write out
in the background, the jbd2 checkpoint procedure will not detect this
failure in jbd2_log_do_checkpoint(), so it may lead to filesystem
inconsistency after cleanup journal tail. This patch abort the journal
if free a buffer has write_io_error flag to prevent potential further
inconsistency.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200620025427.1756360-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11215630aa ]
A customer has reported a BUG_ON in ext4_clear_journal_err() hitting
during an LTP testing. Either this has been caused by a test setup
issue where the filesystem was being overwritten while LTP was mounting
it or the journal replay has overwritten the superblock with invalid
data. In either case it is preferable we don't take the machine down
with a BUG_ON. So handle the situation of unexpectedly missing
has_journal feature more gracefully. We issue warning and fail the mount
in the cases where the race window is narrow and the failed check is
most likely a programming error. In cases where fs corruption is more
likely, we do full ext4_error() handling before failing mount / remount.
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200710140759.18031-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24dc986491 ]
Callers of __jbd2_journal_unfile_buffer() and
__jbd2_journal_refile_buffer() assume that the b_transaction is set. In
fact if it's not, we can end up with journal_head refcounting errors
leading to crash much later that might be very hard to track down. Add
asserts to make sure that is the case.
We also make sure that b_next_transaction is NULL in
__jbd2_journal_unfile_buffer() since the callers expect that as well and
we should not get into that stage in this state anyway, leading to
problems later on if we do.
Tested with fstests.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200617092549.6712-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07c8434150 ]
If a memory allocation fails within a 'usb_ep_alloc_request()' call, the
already allocated memory must be released.
Fix a mix-up in the code and free the correct requests.
Fixes: c52661d60f ("usb-gadget: Initial merge of target module for UASP + BOT")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 914a7b3563 ]
Currently, a NACK in slave mode is set/cleared when SCL is held low by
the IP core right before the bit is about to be pushed out. This is too
late for clearing and then a NACK from the previous byte is still used
for the current one. Now, let's clear the NACK right after we detected
the STOP condition following the NACK.
Fixes: de20d1857d ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3cb82c6d6 ]
When commit c64ffff7a9 ("i2c: core: Allow empty id_table in ACPI case
as well") fixed the enumeration of I²C devices on ACPI enabled platforms
when driver has no ID table, it missed the PRP0001 support.
i2c_device_match() and i2c_acpi_match_device() differently match
driver against given device. Use acpi_driver_match_device(), that is used
in the former, in i2c_device_probe() and don't fail PRP0001 enumeration
when no ID table exist.
Fixes: c64ffff7a9 ("i2c: core: Allow empty id_table in ACPI case as well")
BugLink: https://stackoverflow.com/q/63519678/2511795
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93eb0381e1 ]
If there's only one usable, non-optimized path, nvme_round_robin_path()
returns NULL, which is wrong. Fix it by falling back to "old", like in
the single optimized path case. Also, if the active path isn't changed,
there's no need to re-assign the pointer.
Fixes: 3f6e3246db ("nvme-multipath: fix logic for non-optimized paths")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin George <marting@netapp.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27029b4b18 ]
Normally, blkcg_iolatency_exit() will free related memory in iolatency
when cleanup queue. But if blk_throtl_init() return error and queue init
fail, blkcg_iolatency_exit() will not do that for us. Then it cause
memory leak.
Fixes: d706751215 ("block: introduce blk-iolatency io controller")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db03f88fae ]
c616cbee97 ("blk-mq: punt failed direct issue to dispatch list") supposed
to add request which has been through ->queue_rq() to the hw queue dispatch
list, however it adds request running out of budget or driver tag to hw queue
too. This way basically bypasses request merge, and causes too many request
dispatched to LLD, and system% is unnecessary increased.
Fixes this issue by adding request not through ->queue_rq into sw/scheduler
queue, and this way is safe because no ->queue_rq is called on this request
yet.
High %system can be observed on Azure storvsc device, and even soft lock
is observed. This patch reduces %system during heavy sequential IO,
meantime decreases soft lockup risk.
Fixes: c616cbee97 ("blk-mq: punt failed direct issue to dispatch list")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2de791ab49 ]
Changes from v1:
- update commit description with proper ref-accounting justification
commit db37a34c56 ("block, bfq: get a ref to a group when adding it to a service tree")
introduce leak forbfq_group and blkcg_gq objects because of get/put
imbalance.
In fact whole idea of original commit is wrong because bfq_group entity
can not dissapear under us because it is referenced by child bfq_queue's
entities from here:
-> bfq_init_entity()
->bfqg_and_blkg_get(bfqg);
->entity->parent = bfqg->my_entity
-> bfq_put_queue(bfqq)
FINAL_PUT
->bfqg_and_blkg_put(bfqq_group(bfqq))
->kmem_cache_free(bfq_pool, bfqq);
So parent entity can not disappear while child entity is in tree,
and child entities already has proper protection.
This patch revert commit db37a34c56 ("block, bfq: get a ref to a group when adding it to a service tree")
bfq_group leak trace caused by bad commit:
-> blkg_alloc
-> bfq_pq_alloc
-> bfqg_get (+1)
->bfq_activate_bfqq
->bfq_activate_requeue_entity
-> __bfq_activate_entity
->bfq_get_entity
->bfqg_and_blkg_get (+1) <==== : Note1
->bfq_del_bfqq_busy
->bfq_deactivate_entity+0x53/0xc0 [bfq]
->__bfq_deactivate_entity+0x1b8/0x210 [bfq]
-> bfq_forget_entity(is_in_service = true)
entity->on_st_or_in_serv = false <=== :Note2
if (is_in_service)
return; ==> do not touch reference
-> blkcg_css_offline
-> blkcg_destroy_blkgs
-> blkg_destroy
-> bfq_pd_offline
-> __bfq_deactivate_entity
if (!entity->on_st_or_in_serv) /* true, because (Note2)
return false;
-> bfq_pd_free
-> bfqg_put() (-1, byt bfqg->ref == 2) because of (Note2)
So bfq_group and blkcg_gq will leak forever, see test-case below.
##TESTCASE_BEGIN:
#!/bin/bash
max_iters=${1:-100}
#prep cgroup mounts
mount -t tmpfs cgroup_root /sys/fs/cgroup
mkdir /sys/fs/cgroup/blkio
mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
# Prepare blkdev
grep blkio /proc/cgroups
truncate -s 1M img
losetup /dev/loop0 img
echo bfq > /sys/block/loop0/queue/scheduler
grep blkio /proc/cgroups
for ((i=0;i<max_iters;i++))
do
mkdir -p /sys/fs/cgroup/blkio/a
echo 0 > /sys/fs/cgroup/blkio/a/cgroup.procs
dd if=/dev/loop0 bs=4k count=1 of=/dev/null iflag=direct 2> /dev/null
echo 0 > /sys/fs/cgroup/blkio/cgroup.procs
rmdir /sys/fs/cgroup/blkio/a
grep blkio /proc/cgroups
done
##TESTCASE_END:
Fixes: db37a34c56 ("block, bfq: get a ref to a group when adding it to a service tree")
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d81665198b ]
If we pass in an offset which is larger than PAGE_SIZE, then
page_is_mergeable() thinks it's not mergeable with the previous bio_vec,
leading to a large number of bio_vecs being used. Use a slightly more
obvious test that the two pages are compatible with each other.
Fixes: 52d52d1c98 ("block: only allow contiguous page structs in a bio_vec")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f228af11df ]
We need to set it to the most recent completed fence, not the most
recent submitted. Otherwise we have races where we think we can retire
submits that the GPU is not finished with, if the GPU doesn't manage to
overwrite the seqno before we look at it.
This can show up with hang recovery if one of the submits after the
crashing submit also hangs after it is replayed.
Fixes: f97decac5f ("drm/msm: Support multiple ringbuffers")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af822aa68f ]
1f23816b8e ("virtio_blk: add discard and write zeroes support") starts
to support multi-range discard for virtio-blk. However, the virtio-blk
disk may report max discard segment as 1, at least that is exactly what
qemu is doing.
So far, block layer switches to normal request merge if max discard segment
limit is 1, and multiple bios can be merged to single segment. This way may
cause memory corruption in virtblk_setup_discard_write_zeroes().
Fix the issue by handling single max discard segment in straightforward
way.
Fixes: 1f23816b8e ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Changpeng Liu <changpeng.liu@intel.com>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 943b40c832 ]
When queue_max_discard_segments(q) is 1, blk_discard_mergable() will
return false for discard request, then normal request merge is applied.
However, only queue_max_segments() is checked, so max discard segment
limit isn't respected.
Check max discard segment limit in the request merge code for fixing
the issue.
Discard request failure of virtio_blk is fixed.
Fixes: 6984046608 ("block: fix the DISCARD request merge")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea8912b788 ]
usleep_range() may take longer than the max argument due to scheduling,
especially under load. This is causing random errors in the transmitted
IR. Remove the usleep_range() in favour of busy-looping with udelay().
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 470757f5b3 ]
Capture and playback endpoints on Saffire 6 (USB 1.1) resides on the same
interface. This was not supported by the composite quirk back in the day
when initial support for this device was added, thus only playback was
enabled until now.
Fixes: 11e424e88b ("ALSA: usb-audio: Add support for Focusrite Saffire 6 USB")
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable.vger.kernel.org>
Link: https://lore.kernel.org/r/20200815002103.29247-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de002c55ca ]
Because intel_pstate_set_energy_pref_index() reads and writes the
MSR_HWP_REQUEST register without using the cached value of it used by
intel_pstate_hwp_boost_up() and intel_pstate_hwp_boost_down(), those
functions may overwrite the value written by it and so the EPP value
set via sysfs may be lost.
To avoid that, make intel_pstate_set_energy_pref_index() take the
cached value of MSR_HWP_REQUEST just like the other two routines
mentioned above and update it with the new EPP value coming from
user space in addition to updating the MSR.
Note that the MSR itself still needs to be updated too in case
hwp_boost is unset or the boosting mechanism is not active at the
EPP change time.
Fixes: e0efd5be63 ("cpufreq: intel_pstate: Add HWP boost utility and sched util hooks")
Reported-by: Francisco Jerez <currojerez@riseup.net>
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+: 3da97d4db8ee cpufreq: intel_pstate: Rearrange ...
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45bc6098a3 ]
IA32_MCG_STATUS.RIPV indicates whether the return RIP value pushed onto
the stack as part of machine check delivery is valid or not.
Various drivers copied a code fragment that uses the RIPV bit to
determine the severity of the error as either HW_EVENT_ERR_UNCORRECTED
or HW_EVENT_ERR_FATAL, but this check is reversed (marking errors where
RIPV is set as "FATAL").
Reverse the tests so that the error is marked fatal when RIPV is not set.
Reported-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200707194324.14884-1-tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 323014d85d ]
There are several vars unused on this driver, probably because
it was a modified copy of another driver. Get rid of them.
drivers/edac/sb_edac.c: In function ‘knl_get_dimm_capacity’:
drivers/edac/sb_edac.c:1343:16: warning: variable ‘sad_size’ set but not used [-Wunused-but-set-variable]
1343 | u64 sad_base, sad_size, sad_limit = 0;
| ^~~~~~~~
drivers/edac/sb_edac.c: In function ‘sbridge_mce_output_error’:
drivers/edac/sb_edac.c:2955:8: warning: variable ‘type’ set but not used [-Wunused-but-set-variable]
2955 | char *type, *optype, msg[256];
| ^~~~
drivers/edac/sb_edac.c: In function ‘sbridge_unregister_mci’:
drivers/edac/sb_edac.c:3203:22: warning: variable ‘pvt’ set but not used [-Wunused-but-set-variable]
3203 | struct sbridge_pvt *pvt;
| ^~~
At top level:
drivers/edac/sb_edac.c:266:18: warning: ‘correrrthrsld’ defined but not used [-Wunused-const-variable=]
266 | static const u32 correrrthrsld[] = {
| ^~~~~~~~~~~~~
drivers/edac/sb_edac.c:257:18: warning: ‘correrrcnt’ defined but not used [-Wunused-const-variable=]
257 | static const u32 correrrcnt[] = {
| ^~~~~~~~~~
Acked-by: Borislav Petkov <bp@alien8.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e47110e905 ]
Like zap_pte_range add cond_resched so that we can avoid softlockups as
reported below. On non-preemptible kernel with large I/O map region (like
the one we get when using persistent memory with sector mode), an unmap of
the namespace can report below softlockups.
22724.027334] watchdog: BUG: soft lockup - CPU#49 stuck for 23s! [ndctl:50777]
NIP [c0000000000dc224] plpar_hcall+0x38/0x58
LR [c0000000000d8898] pSeries_lpar_hpte_invalidate+0x68/0xb0
Call Trace:
flush_hash_page+0x114/0x200
hpte_need_flush+0x2dc/0x540
vunmap_page_range+0x538/0x6f0
free_unmap_vmap_area+0x30/0x70
remove_vm_area+0xfc/0x140
__vunmap+0x68/0x270
__iounmap.part.0+0x34/0x60
memunmap+0x54/0x70
release_nodes+0x28c/0x300
device_release_driver_internal+0x16c/0x280
unbind_store+0x124/0x170
drv_attr_store+0x44/0x60
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
__vfs_write+0x3c/0x70
vfs_write+0xd8/0x260
ksys_write+0xdc/0x130
system_call+0x5c/0x70
Reported-by: Harish Sriram <harish@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200807075933.310240-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44be939ff7 ]
Whenever a connector on an MST network is attached, detached, or
undergoes a modeset, the DSC configs for each stream on that
topology will be recalculated. This can change their required
bandwidth, requiring a full reprogramming, as though a modeset
was performed, even if that stream did not change timing.
Therefore, whenever a crtc has drm_atomic_crtc_needs_modeset,
for each crtc that shares a MST topology with that stream and
supports DSC, add that crtc (and all affected connectors and
planes) to the atomic state and set mode_changed on its state
v2: Do this check only on Navi and before adding connectors
and planes on modesetting crtcs
v3: Call the drm_dp_mst_add_affected_dsc_crtcs() to update
all affected CRTCs
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a5139f1c5 ]
The routine cma_init_reserved_areas is designed to activate all
reserved cma areas. It quits when it first encounters an error.
This can leave some areas in a state where they are reserved but
not activated. There is no feedback to code which performed the
reservation. Attempting to allocate memory from areas in such a
state will result in a BUG.
Modify cma_init_reserved_areas to always attempt to activate all
areas. The called routine, cma_activate_area is responsible for
leaving the area in a valid state. No one is making active use
of returned error codes, so change the routine to void.
How to reproduce: This example uses kernelcore, hugetlb and cma
as an easy way to reproduce. However, this is a more general cma
issue.
Two node x86 VM 16GB total, 8GB per node
Kernel command line parameters, kernelcore=4G hugetlb_cma=8G
Related boot time messages,
hugetlb_cma: reserve 8192 MiB, up to 4096 MiB per node
cma: Reserved 4096 MiB at 0x0000000100000000
hugetlb_cma: reserved 4096 MiB on node 0
cma: Reserved 4096 MiB at 0x0000000300000000
hugetlb_cma: reserved 4096 MiB on node 1
cma: CMA area hugetlb could not be activated
# echo 8 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
...
Call Trace:
bitmap_find_next_zero_area_off+0x51/0x90
cma_alloc+0x1a5/0x310
alloc_fresh_huge_page+0x78/0x1a0
alloc_pool_huge_page+0x6f/0xf0
set_max_huge_pages+0x10c/0x250
nr_hugepages_store_common+0x92/0x120
? __kmalloc+0x171/0x270
kernfs_fop_write+0xc1/0x1a0
vfs_write+0xc7/0x1f0
ksys_write+0x5f/0xe0
do_syscall_64+0x4d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: c64be2bb1c ("drivers: add Contiguous Memory Allocator")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200730163123.6451-1-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38cf307c1f ]
For SMP systems using IPI based TLB invalidation, looking at
current->active_mm is entirely reasonable. This then presents the
following race condition:
CPU0 CPU1
flush_tlb_mm(mm) use_mm(mm)
<send-IPI>
tsk->active_mm = mm;
<IPI>
if (tsk->active_mm == mm)
// flush TLBs
</IPI>
switch_mm(old_mm,mm,tsk);
Where it is possible the IPI flushed the TLBs for @old_mm, not @mm,
because the IPI lands before we actually switched.
Avoid this by disabling IRQs across changing ->active_mm and
switch_mm().
Of the (SMP) architectures that have IPI based TLB invalidate:
Alpha - checks active_mm
ARC - ASID specific
IA64 - checks active_mm
MIPS - ASID specific flush
OpenRISC - shoots down world
PARISC - shoots down world
SH - ASID specific
SPARC - ASID specific
x86 - N/A
xtensa - checks active_mm
So at the very least Alpha, IA64 and Xtensa are suspect.
On top of this, for scheduler consistency we need at least preemption
disabled across changing tsk->mm and doing switch_mm(), which is
currently provided by task_lock(), but that's not sufficient for
PREEMPT_RT.
[akpm@linux-foundation.org: add comment]
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200721154106.GE10769@hirez.programming.kicks-ass.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5aa7d1a7f4 ]
When logging an inode we are committing its delayed items if either the
inode is a directory or if it is a new inode, created in the current
transaction.
We need to do it for directories, since new directory indexes are stored
as delayed items of the inode and when logging a directory we need to be
able to access all indexes from the fs/subvolume tree in order to figure
out which index ranges need to be logged.
However for new inodes that are not directories, we do not need to do it
because the only type of delayed item they can have is the inode item, and
we are guaranteed to always log an up to date version of the inode item:
*) for a full fsync we do it by committing the delayed inode and then
copying the item from the fs/subvolume tree with
copy_inode_items_to_log();
*) for a fast fsync we always log the inode item based on the contents of
the in-memory struct btrfs_inode. We guarantee this is always done since
commit e4545de5b0 ("Btrfs: fix fsync data loss after append write").
So stop running delayed items for a new inodes that are not directories,
since that forces committing the delayed inode into the fs/subvolume tree,
wasting time and adding contention to the tree when a full fsync is not
required. We will only do it in case a fast fsync is needed.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c8648dd1f ]
Commit 2c2c452b0c ("Btrfs: fix fsync when extend references are added
to an inode") forced a commit of the delayed inode when logging an inode
in order to ensure we would end up logging the inode item during a full
fsync. By committing the delayed inode, we updated the inode item in the
fs/subvolume tree and then later when copying items from leafs modified in
the current transaction into the log tree (with copy_inode_items_to_log())
we ended up copying the inode item from the fs/subvolume tree into the log
tree. Logging an up to date version of the inode item is required to make
sure at log replay time we get the link count fixup triggered among other
things (replay xattr deletes, etc). The test case generic/040 from fstests
exercises the bug which that commit fixed.
However for a fast fsync we don't need to commit the delayed inode because
we always log an up to date version of the inode item based on the struct
btrfs_inode we have in-memory. We started doing this for fast fsyncs since
commit e4545de5b0 ("Btrfs: fix fsync data loss after append write").
So just stop committing the delayed inode if we are doing a fast fsync,
we are only wasting time and adding contention on fs/subvolume tree.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da447009a2 ]
The function btrfs_log_inode() is quite large and so is its loop which
iterates the inode items from the fs/subvolume tree and copies them into
a log tree. Because this is a large loop inside a very large function
and because an upcoming patch in this series needs to add some more logic
inside that loop, move the loop into a helper function to make it a bit
more manageable.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 535e4fc623 ]
The node distance is hardcoded to 0, which causes a trouble
for some user-level applications. In particular, "libnuma"
expects the distance of a node to itself as LOCAL_DISTANCE.
This update removes the offending node distance override.
Cc: <stable@vger.kernel.org> # 4.4
Fixes: 3a368f742d ("s390/numa: add core infrastructure")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63ef91f24f ]
Booting a recent kernel on a rk3399-based system (nanopc-t4),
equipped with a recent u-boot and ATF results in an Oops due
to a NULL pointer dereference.
This turns out to be due to the rk3399-dmc driver looking for
an *undocumented* property (rockchip,pmu), and happily using
a NULL pointer when the property isn't there.
Instead, make most of what was brought in with 9173c5ceb0
("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters
to TF-A.") conditioned on finding this property in the device-tree,
preventing the driver from exploding.
Cc: stable@vger.kernel.org
Fixes: 9173c5ceb0 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39a6e4739c ]
The probe process may fail, but the devfreq event device remains
enabled. Call devfreq_event_disable_edev on the error return path.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29d867e97f ]
of_node_put() needs to be called when the device node which is got
from of_parse_phandle has finished using.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e65855a52b ]
The following splat was caught when setting uclamp value of a task:
BUG: sleeping function called from invalid context at ./include/linux/percpu-rwsem.h:49
cpus_read_lock+0x68/0x130
static_key_enable+0x1c/0x38
__sched_setscheduler+0x900/0xad8
Fix by ensuring we enable the key outside of the critical section in
__sched_setscheduler()
Fixes: 46609ce227 ("sched/uclamp: Protect uclamp fast path code with static key")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200716110347.19553-4-qais.yousef@arm.com
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46609ce227 ]
There is a report that when uclamp is enabled, a netperf UDP test
regresses compared to a kernel compiled without uclamp.
https://lore.kernel.org/lkml/20200529100806.GA3070@suse.de/
While investigating the root cause, there were no sign that the uclamp
code is doing anything particularly expensive but could suffer from bad
cache behavior under certain circumstances that are yet to be
understood.
https://lore.kernel.org/lkml/20200616110824.dgkkbyapn3io6wik@e107158-lin/
To reduce the pressure on the fast path anyway, add a static key that is
by default will skip executing uclamp logic in the
enqueue/dequeue_task() fast path until it's needed.
As soon as the user start using util clamp by:
1. Changing uclamp value of a task with sched_setattr()
2. Modifying the default sysctl_sched_util_clamp_{min, max}
3. Modifying the default cpu.uclamp.{min, max} value in cgroup
We flip the static key now that the user has opted to use util clamp.
Effectively re-introducing uclamp logic in the enqueue/dequeue_task()
fast path. It stays on from that point forward until the next reboot.
This should help minimize the effect of util clamp on workloads that
don't need it but still allow distros to ship their kernels with uclamp
compiled in by default.
SCHED_WARN_ON() in uclamp_rq_dec_id() was removed since now we can end
up with unbalanced call to uclamp_rq_dec_id() if we flip the key while
a task is running in the rq. Since we know it is harmless we just
quietly return if we attempt a uclamp_rq_dec_id() when
rq->uclamp[].bucket[].tasks is 0.
In schedutil, we introduce a new uclamp_is_enabled() helper which takes
the static key into account to ensure RT boosting behavior is retained.
The following results demonstrates how this helps on 2 Sockets Xeon E5
2x10-Cores system.
nouclamp uclamp uclamp-static-key
Hmean send-64 162.43 ( 0.00%) 157.84 * -2.82%* 163.39 * 0.59%*
Hmean send-128 324.71 ( 0.00%) 314.78 * -3.06%* 326.18 * 0.45%*
Hmean send-256 641.55 ( 0.00%) 628.67 * -2.01%* 648.12 * 1.02%*
Hmean send-1024 2525.28 ( 0.00%) 2448.26 * -3.05%* 2543.73 * 0.73%*
Hmean send-2048 4836.14 ( 0.00%) 4712.08 * -2.57%* 4867.69 * 0.65%*
Hmean send-3312 7540.83 ( 0.00%) 7425.45 * -1.53%* 7621.06 * 1.06%*
Hmean send-4096 9124.53 ( 0.00%) 8948.82 * -1.93%* 9276.25 * 1.66%*
Hmean send-8192 15589.67 ( 0.00%) 15486.35 * -0.66%* 15819.98 * 1.48%*
Hmean send-16384 26386.47 ( 0.00%) 25752.25 * -2.40%* 26773.74 * 1.47%*
The perf diff between nouclamp and uclamp-static-key when uclamp is
disabled in the fast path:
8.73% -1.55% [kernel.kallsyms] [k] try_to_wake_up
0.07% +0.04% [kernel.kallsyms] [k] deactivate_task
0.13% -0.02% [kernel.kallsyms] [k] activate_task
The diff between nouclamp and uclamp-static-key when uclamp is enabled
in the fast path:
8.73% -0.72% [kernel.kallsyms] [k] try_to_wake_up
0.13% +0.39% [kernel.kallsyms] [k] activate_task
0.07% +0.38% [kernel.kallsyms] [k] deactivate_task
Fixes: 69842cba9a ("sched/uclamp: Add CPU's clamp buckets refcounting")
Reported-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20200630112123.12076-3-qais.yousef@arm.com
[ Fix minor conflict with kernel/sched.h because of function renamed
later ]
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1769bb68a ]
This reverts commit 76d164f582.
PCIe hung issue was observed on multiple platforms. The issue was reproduced
when DUT was configured as AP and associated with 50+ STAs.
For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size
of the RD/WR access to the HOST MEM.
0 - No split , RAW read/write transfer size from MAC is put out on bus
as burst length
1 - Split at 256 byte boundary
2,3 - Reserved
With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when
issue happened. It broke PCIe spec and caused PCIe stuck. So revert
the default value from 0 to 1.
Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047
QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044
Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040
Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eaecca9e77 ]
The __cpu_logical_map undefined issue occued when the new
tegra194-cpufreq drvier building as a module.
ERROR: modpost: "__cpu_logical_map" [drivers/cpufreq/tegra194-cpufreq.ko] undefined!
The driver using cpu_logical_map() macro which will expand to
__cpu_logical_map, we can't access it in a drvier. Let's turn
cpu_logical_map() into a C wrapper and export it to fix the
build issue.
Also create a function set_cpu_logical_map(cpu, hwid) when assign
a value to cpu_logical_map(cpu).
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b648a5132c ]
The kernel test robot pointed out a slightly different error message
after recent commit 5456ffdee6 ("powerpc/spufs: simplify spufs core
dumping") to spufs for a configuration that never worked:
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_proxydma_info_dump':
>> file.c:(.text+0x4c68): undefined reference to `.dump_emit'
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_dma_info_dump':
file.c:(.text+0x4d70): undefined reference to `.dump_emit'
powerpc64-linux-ld: arch/powerpc/platforms/cell/spufs/file.o: in function `.spufs_wbox_info_dump':
file.c:(.text+0x4df4): undefined reference to `.dump_emit'
Add a Kconfig dependency to prevent this from happening again.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200706132302.3885935-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b38b298aa4 ]
__hyp_call_panic_nvhe contains inline assembly which did not declare
its dependency on the __hyp_panic_string symbol.
The static-declared string has previously been kept alive because of a use in
__hyp_call_panic_vhe. Fix this in preparation for separating the source files
between VHE and nVHE when the two users land in two different compilation
units. The static variable otherwise gets dropped when compiling the nVHE
source file, causing an undefined symbol linker error later.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-2-dbrazdil@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 602649eada ]
In case of errors vpif_probe_complete() releases memory for vpif_obj.sd
and unregisters the V4L2 device. But then this is done again by
vpif_probe() itself. The patch removes the cleaning from
vpif_probe_complete().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1d9655052 ]
In aio case, if the completion comes very fast just before the
ceph_read_iter() returns to fs/aio.c, the kiocb will be freed in
the completion callback, then if ceph_read_iter() access again
we will potentially hit the use-after-free bug.
[ jlayton: initialize direct_lock early, and use it everywhere ]
URL: https://tracker.ceph.com/issues/45649
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa99677342 ]
Make sure the delayed work stopped before releasing the resources.
cancel_delayed_work_sync() will only guarantee that the work finishes
executing if the work is already in the ->worklist. That means after
the cancel_delayed_work_sync() returns, it will leave the work requeued
if it was rearmed at the end. That can lead to a use after free once the
work struct is freed.
Fix it by flushing the delayed work instead of trying to cancel it, and
ensure that the work doesn't rearm if the mdsc is stopping.
URL: https://tracker.ceph.com/issues/46293
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfdd459215 ]
vfs_inode is used only for the inode number everything else requires
btrfs_inode.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use btrfs_ino ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7f8b1c2ac ]
The incoming qgroup reserved space timing will move the data reservation
to ordered extent completely.
However in btrfs_punch_hole_lock_range() will call
btrfs_invalidate_page(), which will clear QGROUP_RESERVED bit for the
range.
In current stage it's OK, but if we're making ordered extents handle the
reserved space, then btrfs_punch_hole_lock_range() can clear the
QGROUP_RESERVED bit before we submit ordered extent, leading to qgroup
reserved space leakage.
So here change the timing to make reserve data space after
btrfs_punch_hole_lock_range().
The new timing is fine for either current code or the new code.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7ef9b28aa ]
Though the number of lock-acquisitions is tracked as unsigned long, this
is passed as the divisor to div_s64() which interprets it as a s32,
giving nonsense values with more than 2 billion acquisitons. E.g.
acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
-------------------------------------------------------------------------
2350439395 0.07 353.38 649647067.36 0.-32
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200725185110.11588-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 990a116298 ]
nouveau_connector_detect() calls pm_runtime_get_sync and in turn
increments the reference count. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2cdf39536 ]
nv50_disp_atomic_commit() calls calls pm_runtime_get_sync and in turn
increments the reference count. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfad51c763 ]
nouveau_fbcon_open() calls calls pm_runtime_get_sync() that
increments the reference count. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99c787cfd2 ]
During umount, f2fs_put_super() unregisters procfs entries after
f2fs_destroy_segment_manager(), it may cause use-after-free
issue when umount races with procfs accessing, fix it by relocating
f2fs_unregister_sysfs().
[Chao Yu: change commit title/message a bit]
Signed-off-by: Li Guifu <bluce.liguifu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68f775ddd2 ]
Add HID_QUIRK_NOGET for Logitech GROUP device.
Logitech GROUP is a compound with camera and audio.
When the HID interface in an audio device is requested to get
specific report id, all following control transfers are stalled
and never be restored back.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203419
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5656bb3857 ]
The timer fixed interval period pulse generator register
is used to generate periodic pulses. The down count
register loads the value programmed in the fixed period
interval (FIPER). At every tick of the timer accumulator
overflow, the counter decrements by the value of
TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down
counter value reaches zero. It reloads the down counter
in the cycle following a pulse.
To use the TMR_FIPER register to generate desired periodic
pulses. The value should programmed is,
desired_period - tclk_period
Current tmr-fiper2 value is to generate 100us periodic pulses.
(But the value should have been 99995, not 99990. The tclk_period is 5.)
This patch is to generate 1 second periodic pulses with value
999999995 programmed which is more desired by user.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a94644b44 ]
kobject_init_and_add() takes a reference even when it fails. If it returns
an error, kobject_put() must be called to clean up the memory associated
with the object.
When kobject_init_and_add() fails, call kobject_put() instead of kfree().
b8eb718348 ("net-sysfs: Fix reference count leak in
rx|netdev_queue_add_kobject") fixed a similar problem.
Link: https://lore.kernel.org/r/20200528021322.1984-1-wu000273@umn.edu
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3337bf41e0 ]
An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per-
formed when count_pmc() is used to reset PMCs on a few selftests. This
extra pmc_count can occasionally invalidate results, such as the ones from
cycles_test shown hereafter. The ebb_check_count() failed with an above
the upper limit error due to the extra value on ebb_state.stats.pmc_count.
Furthermore, this extra count is also indicated by extra PMC1 trace_log on
the output of the cycle test (as well as on pmc56_overflow_test):
==========
...
[21]: counter = 8
[22]: register SPRN_MMCR0 = 0x0000000080000080
[23]: register SPRN_PMC1 = 0x0000000080000004
[24]: counter = 9
[25]: register SPRN_MMCR0 = 0x0000000080000080
[26]: register SPRN_PMC1 = 0x0000000080000004
[27]: counter = 10
[28]: register SPRN_MMCR0 = 0x0000000080000080
[29]: register SPRN_PMC1 = 0x0000000080000004
>> [30]: register SPRN_PMC1 = 0x000000004000051e
PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e)
[FAIL] Test FAILED on line 52
failure: cycles
==========
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96355d5a1f ]
In tracking down a problem in this patchset, I discovered we are
reclaiming dirty stale inodes. This wasn't discovered until inodes
were always attached to the cluster buffer and then the rcu callback
that freed inodes was assert failing because the inode still had an
active pointer to the cluster buffer after it had been reclaimed.
Debugging the issue indicated that this was a pre-existing issue
resulting from the way the inodes are handled in xfs_inactive_ifree.
When we free a cluster buffer from xfs_ifree_cluster, all the inodes
in cache are marked XFS_ISTALE. Those that are clean have nothing
else done to them and so eventually get cleaned up by background
reclaim. i.e. it is assumed we'll never dirty/relog an inode marked
XFS_ISTALE.
On journal commit dirty stale inodes as are handled by both
buffer and inode log items to run though xfs_istale_done() and
removed from the AIL (buffer log item commit) or the log item will
simply unpin it because the buffer log item will clean it. What happens
to any specific inode is entirely dependent on which log item wins
the commit race, but the result is the same - stale inodes are
clean, not attached to the cluster buffer, and not in the AIL. Hence
inode reclaim can just free these inodes without further care.
However, if the stale inode is relogged, it gets dirtied again and
relogged into the CIL. Most of the time this isn't an issue, because
relogging simply changes the inode's location in the current
checkpoint. Problems arise, however, when the CIL checkpoints
between two transactions in the xfs_inactive_ifree() deferops
processing. This results in the XFS_ISTALE inode being redirtied
and inserted into the CIL without any of the other stale cluster
buffer infrastructure being in place.
Hence on journal commit, it simply gets unpinned, so it remains
dirty in memory. Everything in inode writeback avoids XFS_ISTALE
inodes so it can't be written back, and it is not tracked in the AIL
so there's not even a trigger to attempt to clean the inode. Hence
the inode just sits dirty in memory until inode reclaim comes along,
sees that it is XFS_ISTALE, and goes to reclaim it. This reclaiming
of a dirty inode caused use after free, list corruptions and other
nasty issues later in this patchset.
Hence this patch addresses a violation of the "never log XFS_ISTALE
inodes" caused by the deferops processing rolling a transaction
and relogging a stale inode in xfs_inactive_free. It also adds a
bunch of asserts to catch this problem in debug kernels so that
we don't reintroduce this problem in future.
Reproducer for this issue was generic/558 on a v4 filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03dbfe0668 ]
When vports are deleted, it is observed that there is memory/kthread
leakage as the vport isn't fully being released.
There is a shost reference taken in scsi_add_host_dma that is not released
during scsi_remove_host. It was noticed that other drivers resolve this by
doing a scsi_host_put after calling scsi_remove_host.
The vport_delete routine is taking two references one that corresponds to
an access to the scsi_host in the vport_delete routine and another that is
released after the adapter mailbox command completes that destroys the VPI
that corresponds to the vport.
Remove one of the references taken such that the second reference that is
put will complete the missing scsi_add_host_dma reference and the shost
will be terminated.
Link: https://lore.kernel.org/r/20200630215001.70793-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f79f94765f ]
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e008fa6fb4 ]
in amdgpu_display_crtc_set_config, the call to pm_runtime_get_sync
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5509ac65f2 ]
in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ba8923cbb ]
in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f2e8acdb4 ]
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20eca0123a ]
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3e3d2be68 ]
Unlike the other instances which represent a complete loss of
consistency within the rcache mechanism itself, or a fundamental
and obvious misconfiguration by an IOMMU driver, the BUG_ON() in
iova_magazine_free_pfns() can be provoked at more or less any time
in a "spooky action-at-a-distance" manner by any old device driver
passing nonsense to dma_unmap_*() which then propagates through to
queue_iova().
Not only is this well outside the IOVA layer's control, it's also
nowhere near fatal enough to justify panicking anyway - all that
really achieves is to make debugging the offending driver more
difficult. Let's simply WARN and otherwise ignore bogus PFNs.
Reported-by: Prakash Gupta <guptap@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Prakash Gupta <guptap@codeaurora.org>
Link: https://lore.kernel.org/r/acbd2d092b42738a03a21b417ce64e27f8c91c86.1591103298.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b431ef837e ]
We make an assumption that a debugfs directory exists, but since
this can fail ensure it exists before allowing blktrace setup to
complete. Otherwise we end up stuffing blktrace files on the debugfs
root directory. In the worst case scenario this *in theory* can create
an eventual panic *iff* in the future a similarly named file is created
prior on the debugfs root directory. This theoretical crash can happen
due to a recursive removal followed by a specific dentry removal.
This doesn't fix any known crash, however I have seen the files
go into the main debugfs root directory in cases where the debugfs
directory was not created due to other internal bugs with blktrace
now fixed.
blktrace is also completely useless without this directory, so
this ensures to userspace we only setup blktrace if the kernel
can stuff files where they are supposed to go into.
debugfs directory creations typically aren't checked for, and we have
maintainers doing sweep removals of these checks, but since we need this
check to ensure proper userspace blktrace functionality we make sure
to annotate the justification for the check.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6499a0db9b ]
The value av7110->debi_virt is stored in DMA memory, and it is assigned
to data, and thus data[0] can be modified at any time by malicious
hardware. In this case, "if (data[0] < 2)" can be passed, but then
data[0] can be changed into a large number, which may cause buffer
overflow when the code "av7110->ci_slot[data[0]]" is used.
To fix this possible bug, data[0] is assigned to a local variable, which
replaces the use of data[0].
Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd72c317a0 ]
HDMI on some platforms doesn't enable audio support because its Port
Connectivity [31:30] is set to AC_JACK_PORT_NONE:
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x58560010: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 3
0x02 0x03* 0x04
For now, use a quirk to force connectivity based on SSID. If there are
more platforms affected by the same issue, we can eye for a more generic
solution.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200804155836.16252-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0f5c7076e ]
Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose
NETIF_F_LLTX feature because of the incorrect handling of
features in ipvlan_fix_features().
--before--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Actual changes:
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: off [fixed]
lpaa10:~#
--after--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Could not change any device features
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~#
Fixes: 2ad7bf3638 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eda814b97d ]
tcf_ct_handle_fragments() shouldn't free the skb when ip_defrag() call
fails. Otherwise, we will cause a double-free bug.
In such cases, just return the error to the caller.
Fixes: b57dc7c13e ("net/sched: Introduce action ct")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ccd143e515 ]
Most statistics in ena driver are incremented, meaning that a stat's
value is a sum of all increases done to it since driver/queue
initialization.
This patch makes all statistics this way, effectively making missed_tx
statistic incremental.
Also added a comment regarding rx_drops and tx_drops to make it
clearer how these counters are calculated.
Fixes: 11095fdb71 ("net: ena: add statistics for missed tx packets")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 47733f9daf ]
__tipc_nl_compat_dumpit() has two callers, and it expects them to
pass a valid nlmsghdr via arg->data. This header is artificial and
crafted just for __tipc_nl_compat_dumpit().
tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well
as some nested attribute, TIPC_NLA_SOCK. But the other caller
tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized
on this call path.
Fix this by just adding a similar nlmsghdr without any payload in
tipc_nl_compat_dumpit().
This bug exists since day 1, but the recent commit 6ea67769ff
("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it
easier to appear.
Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com
Fixes: d0796d1ef6 ("tipc: convert legacy nl bearer dump to nl compat")
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Richard Alpe <richard.alpe@ericsson.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce51f63e63 ]
__smc_diag_dump() is potentially copying uninitialized kernel stack memory
into socket buffers, since the compiler may leave a 4-byte hole near the
beginning of `struct smcd_diag_dmbinfo`. Fix it by initializing `dinfo`
with memset().
Fixes: 4b1b7d3b30 ("net/smc: add SMC-D diag support")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ab921f3cdb ]
The number of output and input streams was never being reduced, eg when
processing received INIT or INIT_ACK chunks.
The effect is that DATA chunks can be sent with invalid stream ids
and then discarded by the remote system.
Fixes: 2075e50caf ("sctp: convert to genradix")
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8dfddfb796 ]
Passing large uint32 sockaddr_qrtr.port numbers for port allocation
triggers a warning within idr_alloc() since the port number is cast
to int, and thus interpreted as a negative number. This leads to
the rejection of such valid port numbers in qrtr_port_assign() as
idr_alloc() fails.
To avoid the problem, switch to idr_alloc_u32() instead.
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Reported-by: syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com
Signed-off-by: Necip Fazil Yildiran <necip@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55eff0eb74 ]
We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So
we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or
we may access the wrong data.
Fixes: 0d5501c1c8 ("net: Always untag vlan-tagged traffic on input.")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 272502fcb7 ]
When receiving an IPv4 packet inside an IPv6 GRE packet, and the
IP6_TNL_F_RCV_DSCP_COPY flag is set on the tunnel, the IPv4 header would
get corrupted. This is due to the common ip6_tnl_rcv() function assuming
that the inner header is always IPv6. This patch checks the tunnel
protocol for IPv4 inner packets, but still defaults to IPv6.
Fixes: 308edfdf15 ("gre6: Cleanup GREv6 receive path, call common GRE functions")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2217b98262 upstream.
binfmt_flat loader uses the gap between text and data to store data
segment pointers for the libraries. Even in the absence of shared
libraries it stores at least one pointer to the executable's own data
segment. Text and data can go back to back in the flat binary image and
without offsetting data segment last few instructions in the text
segment may get corrupted by the data segment pointer.
Fix it by reverting commit a2357223c5 ("binfmt_flat: don't offset the
data start").
Cc: stable@vger.kernel.org
Fixes: a2357223c5 ("binfmt_flat: don't offset the data start")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0828137e8f upstream.
__init_FSCR() was added originally in commit 2468dcf641 ("powerpc:
Add support for context switching the TAR register") (Feb 2013), and
only set FSCR_TAR.
At that point FSCR (Facility Status and Control Register) was not
context switched, so the setting was permanent after boot.
Later we added initialisation of FSCR_DSCR to __init_FSCR(), in commit
54c9b2253d ("powerpc: Set DSCR bit in FSCR setup") (Mar 2013), again
that was permanent after boot.
Then commit 2517617e0d ("powerpc: Fix context switch DSCR on
POWER8") (Aug 2013) added a limited context switch of FSCR, just the
FSCR_DSCR bit was context switched based on thread.dscr_inherit. That
commit said "This clears the H/FSCR DSCR bit initially", but it
didn't, it left the initialisation of FSCR_DSCR in __init_FSCR().
However the initial context switch from init_task to pid 1 would clear
FSCR_DSCR because thread.dscr_inherit was 0.
That commit also introduced the requirement that FSCR_DSCR be clear
for user processes, so that we can take the facility unavailable
interrupt in order to manage dscr_inherit.
Then in commit 152d523e63 ("powerpc: Create context switch helpers
save_sprs() and restore_sprs()") (Dec 2015) FSCR was added to
thread_struct. However it still wasn't fully context switched, we just
took the existing value and set FSCR_DSCR if the new thread had
dscr_inherit set. FSCR was still initialised at boot to FSCR_DSCR |
FSCR_TAR, but that value was not propagated into the thread_struct, so
the initial context switch set FSCR_DSCR back to 0.
Finally commit b57bd2de8c ("powerpc: Improve FSCR init and context
switching") (Jun 2016) added a full context switch of the FSCR, and
added an initialisation of init_task.thread.fscr to FSCR_TAR |
FSCR_EBB, but omitted FSCR_DSCR.
The end result is that swapper runs with FSCR_DSCR set because of the
initialisation in __init_FSCR(), but no other processes do, they use
the value from init_task.thread.fscr.
Having FSCR_DSCR set for swapper allows it to access SPR 3 from
userspace, but swapper never runs userspace, so it has no useful
effect. It's also confusing to have the value initialised in two
places to two different values.
So remove FSCR_DSCR from __init_FSCR(), this at least gets us to the
point where there's a single value of FSCR, even if it's still set in
two places.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-1-mpe@ellerman.id.au
Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AppArmor security has been a long-requested feature. This commit
adds the config settings necessary to allow it to be enabled at boot
time using the kernel command line (cmdline.txt) - just include:
lsm="apparmor"
The commit also includes a few settings to give better control over
processes or containers.
See: https://github.com/raspberrypi/linux/pull/1698
Signed-off-by: Jean-Christophe Berthon <jcberthon@users.noreply.github.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
The evdev module is required to use a keyboard (although not a mouse,
it appears). This means that if a kernel is unable to load modules the
user will be unable to interact with it by attaching a keyboard.
For the cost of a few KBs in kernel bloat, make evdev a built-in
driver.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
The spi0-1cs overlay allows the SPI0 interface to be run with a single
CS line, which can be useful if GPIOs are in short supply. The no_miso
parameter is for write-only devices that don't need the return channel,
and again is there to free up a GPIO.
spi0-2cs is the new name for spi0-cs (now deprecated with a redirect
to spi0-2cs), but with the addedd no_miso parameter.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
The sensor supports 8 bit mode as well as 10bit, so add the
relevant code to allow selection of this.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Fix commit "media: tc358743: Return an appropriate colorspace from
tc358743_set_fmt" to ensure that the format passed in to set_fmt
is checked to be valid, and reset to the current format if not.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Pi 0&1 pass all ARM accesses through the VPU L2 cache, therefore
the dma-ranges property sets the cache alias bits to other
than the direct alias, hence this WARN was firing.
It was overprotective coding, so assume that everything is OK
with the dma-ranges, and remove the WARN.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
The /soc/dma-ranges property on BCM2835 currently results in DMA
addresses in the range 0x40000000-0x5fffffff. This will allocate in the
system L2 cache, which may adversely affect performance.
Change the dma-ranges property to give addresses in the range
0x80000000-0x9fffffff, which are coherent with L2 but non-allocating.
See: https://github.com/raspberrypi/linux/issues/3602
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
commit b5331379bc upstream.
When an MMU notifier call results in unmapping a range that spans multiple
PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary,
since this avoids running into RCU stalls during VM teardown. Unfortunately,
if the VM is destroyed as a result of OOM, then blocking is not permitted
and the call to the scheduler triggers the following BUG():
| BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394
| in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper
| INFO: lockdep is turned off.
| CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1
| Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
| Call trace:
| dump_backtrace+0x0/0x284
| show_stack+0x1c/0x28
| dump_stack+0xf0/0x1a4
| ___might_sleep+0x2bc/0x2cc
| unmap_stage2_range+0x160/0x1ac
| kvm_unmap_hva_range+0x1a0/0x1c8
| kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8
| __mmu_notifier_invalidate_range_start+0x218/0x31c
| mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0
| __oom_reap_task_mm+0x128/0x268
| oom_reap_task+0xac/0x298
| oom_reaper+0x178/0x17c
| kthread+0x1e4/0x1fc
| ret_from_fork+0x10/0x30
Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we
only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier
flags.
Cc: <stable@vger.kernel.org>
Fixes: 8b3405e345 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-3-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdfe7cbd58 upstream.
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For support of long running hypercalls xen_maybe_preempt_hcall() is
calling cond_resched() in case a hypercall marked as preemptible has
been interrupted.
Normally this is no problem, as only hypercalls done via some ioctl()s
are marked to be preemptible. In rare cases when during such a
preemptible hypercall an interrupt occurs and any softirq action is
started from irq_exit(), a further hypercall issued by the softirq
handler will be regarded to be preemptible, too. This might lead to
rescheduling in spite of the softirq handler potentially having set
preempt_disable(), leading to splats like:
BUG: sleeping function called from invalid context at drivers/xen/preempt.c:37
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 20775, name: xl
INFO: lockdep is turned off.
CPU: 1 PID: 20775 Comm: xl Tainted: G D W 5.4.46-1_prgmr_debug.el7.x86_64 #1
Call Trace:
<IRQ>
dump_stack+0x8f/0xd0
___might_sleep.cold.76+0xb2/0x103
xen_maybe_preempt_hcall+0x48/0x70
xen_do_hypervisor_callback+0x37/0x40
RIP: e030:xen_hypercall_xen_version+0xa/0x20
Code: ...
RSP: e02b:ffffc900400dcc30 EFLAGS: 00000246
RAX: 000000000004000d RBX: 0000000000000200 RCX: ffffffff8100122a
RDX: ffff88812e788000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffffff83ee3ad0 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: ffff8881824aa0b0
R13: 0000000865496000 R14: 0000000865496000 R15: ffff88815d040000
? xen_hypercall_xen_version+0xa/0x20
? xen_force_evtchn_callback+0x9/0x10
? check_events+0x12/0x20
? xen_restore_fl_direct+0x1f/0x20
? _raw_spin_unlock_irqrestore+0x53/0x60
? debug_dma_sync_single_for_cpu+0x91/0xc0
? _raw_spin_unlock_irqrestore+0x53/0x60
? xen_swiotlb_sync_single_for_cpu+0x3d/0x140
? mlx4_en_process_rx_cq+0x6b6/0x1110 [mlx4_en]
? mlx4_en_poll_rx_cq+0x64/0x100 [mlx4_en]
? net_rx_action+0x151/0x4a0
? __do_softirq+0xed/0x55b
? irq_exit+0xea/0x100
? xen_evtchn_do_upcall+0x2c/0x40
? xen_do_hypervisor_callback+0x29/0x40
</IRQ>
? xen_hypercall_domctl+0xa/0x20
? xen_hypercall_domctl+0x8/0x20
? privcmd_ioctl+0x221/0x990 [xen_privcmd]
? do_vfs_ioctl+0xa5/0x6f0
? ksys_ioctl+0x60/0x90
? trace_hardirqs_off_thunk+0x1a/0x20
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x62/0x250
? entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix that by testing preempt_count() before calling cond_resched().
In kernel 5.8 this can't happen any more due to the entry code rework
(more than 100 patches, so not a candidate for backporting).
The issue was introduced in kernel 4.3, so this patch should go into
all stable kernels in [4.3 ... 5.7].
Reported-by: Sarah Newman <srn@prgmr.com>
Fixes: 0fa2f5cb2b ("sched/preempt, xen: Use need_resched() instead of should_resched()")
Cc: Sarah Newman <srn@prgmr.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Chris Brannon <cmb@prgmr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75802ca663 upstream.
This is found by code observation only.
Firstly, the worst case scenario should assume the whole range was covered
by pmd sharing. The old algorithm might not work as expected for ranges
like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the
expected range should be (0, 2g).
Since at it, remove the loop since it should not be required. With that,
the new code should be faster too when the invalidating range is huge.
Mike said:
: With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only
: adjust to (0, 1g+2m) which is incorrect.
:
: We should cc stable. The original reason for adjusting the range was to
: prevent data corruption (getting wrong page). Since the range is not
: always adjusted correctly, the potential for corruption still exists.
:
: However, I am fairly confident that adjust_range_if_pmd_sharing_possible
: is only gong to be called in two cases:
:
: 1) for a single page
: 2) for range == entire vma
:
: In those cases, the current code should produce the correct results.
:
: To be safe, let's just cc stable.
Fixes: 017b1660df ("mm: migration: fix migration of huge PMD shared pages")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9ed4a6560 upstream.
When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.
However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90a9b102ed upstream.
As per PAPR we have to look for both EPOW sensor value and event
modifier to identify the type of event and take appropriate action.
In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes":
SYSTEM_SHUTDOWN 3
The system must be shut down. An EPOW-aware OS logs the EPOW error
log information, then schedules the system to be shut down to begin
after an OS defined delay internal (default is 10 minutes.)
Then in section 10.3.2.2.8 there is table 146 "Platform Event Log
Format, Version 6, EPOW Section", which includes the "EPOW Event
Modifier":
For EPOW sensor value = 3
0x01 = Normal system shutdown with no additional delay
0x02 = Loss of utility power, system is running on UPS/Battery
0x03 = Loss of system critical functions, system should be shutdown
0x04 = Ambient temperature too high
All other values = reserved
We have a user space tool (rtas_errd) on LPAR to monitor for
EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown
after predefined time. It also starts monitoring for any new EPOW
events. If it receives "Power restored" event before predefined time
it will cancel the shutdown. Otherwise after predefined time it will
shutdown the system.
Commit 79872e3546 ("powerpc/pseries: All events of
EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of
the "on UPS/Battery" case, to immediately shutdown the system. This
breaks existing setups that rely on the userspace tool to delay
shutdown and let the system run on the UPS.
Fixes: 79872e3546 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Massage change log and add PAPR references]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 774d977abf ]
clang static analysis reports this problem
b53_common.c:1583:13: warning: The left expression of the compound
assignment is an uninitialized value. The computed value will
also be garbage
ent.port &= ~BIT(port);
~~~~~~~~ ^
ent is set by a successful call to b53_arl_read(). Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.
So add -ETIMEDOUT to the switch statement. Because
b53_arl_op_wait() already prints out a message, do not add another
one.
Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3d897e01a ]
netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue
or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the
queue number, so the “skb->queue_mapping - 1” will be used. This may
cause the last queue of VF not been used.
Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called
later will get the correct queue number, and VF will be able to use
all queues.
Fixes: b3bf5666a5 ("hv_netvsc: defer queue selection to VF")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf96d97738 ]
Replace alloc_etherdev_mq with devm_alloc_etherdev_mqs. In this way,
when probe fails, netdev can be freed automatically.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63d4a4c145 ]
The reset work is scheduled by the timer routine whenever it
detects that a device reset is required (e.g. when a keep_alive signal
is missing).
When releasing device resources in ena_destroy_device() the driver
cancels the scheduling of the timer routine without destroying the reset
work explicitly.
This creates the following bug:
The driver is suspended and the ena_suspend() function is called
-> This function calls ena_destroy_device() to free the net device
resources
-> The driver waits for the timer routine to finish
its execution and then cancels it, thus preventing from it
to be called again.
If, in its final execution, the timer routine schedules a reset,
the reset routine might be called afterwards,and a redundant call to
ena_restore_device() would be made.
By changing the reset routine we allow it to read the device's state
accurately.
This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set
before resetting the device and making both the destruction function and
the flag check are under rtnl lock.
The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction
routine. Also surround the flag check with 'likely' because
we expect that the reset routine would be called only when
ENA_FLAG_TRIGGER_RESET flag is set.
The destruction of the timer and reset services in __ena_shutoff() have to
stay, even though the timer routine is destroyed in ena_destroy_device().
This is to avoid a case in which the reset routine is scheduled after
free_netdev() in __ena_shutoff(), which would create an access to freed
memory in adapter->flags.
Fixes: 8c5c7abdeb ("net: ena: add power management ops to the ENA driver")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0410d07190 ]
When the ARP monitor is used for link detection, ARP replies are
validated for all slaves (arp_validate=3) and fail_over_mac is set to
active, two slaves of an active-backup bond may get stuck in a state
where both of them are active and pass packets that they receive to
the bond. This state makes IPv6 duplicate address detection fail. The
state is reached thus:
1. The current active slave goes down because the ARP target
is not reachable.
2. The current ARP slave is chosen and made active.
3. A new slave is enslaved. This new slave becomes the current active
slave and can reach the ARP target.
As a result, the current ARP slave stays active after the enslave
action has finished and the log is littered with "PROBE BAD" messages:
> bond0: PROBE: c_arp ens10 && cas ens11 BAD
The workaround is to remove the slave with "going back" status from
the bond and re-enslave it. This issue was encountered when DPDK PMD
interfaces were being enslaved to an active-backup bond.
I would be possible to fix the issue in bond_enslave() or
bond_change_active_slave() but the ARP monitor was fixed instead to
keep most of the actions changing the current ARP slave in the ARP
monitor code. The current ARP slave is set as inactive and backup
during the commit phase. A new state, BOND_LINK_FAIL, has been
introduced for slaves in the context of the ARP monitor. This allows
administrators to see how slaves are rotated for sending ARP requests
and attempts are made to find a new active slave.
Fixes: b2220cad58 ("bonding: refactor ARP active-backup monitor")
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e0b17b026 ]
If an error occurs during the construction of an afs superblock, it's
possible that an error occurs after a superblock is created, but before
we've created the root dentry. If the superblock has a dynamic root
(ie. what's normally mounted on /afs), the afs_kill_super() will call
afs_dynroot_depopulate() to unpin any created dentries - but this will
oops if the root hasn't been created yet.
Fix this by skipping that bit of code if there is no root dentry.
This leads to an oops looking like:
general protection fault, ...
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
...
RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385
...
Call Trace:
afs_kill_super+0x13b/0x180 fs/afs/super.c:535
deactivate_locked_super+0x94/0x160 fs/super.c:335
afs_get_tree+0x1124/0x1460 fs/afs/super.c:598
vfs_get_tree+0x89/0x2f0 fs/super.c:1547
do_new_mount fs/namespace.c:2875 [inline]
path_mount+0x1387/0x2070 fs/namespace.c:3192
do_mount fs/namespace.c:3205 [inline]
__do_sys_mount fs/namespace.c:3413 [inline]
__se_sys_mount fs/namespace.c:3390 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3390
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
which is oopsing on this line:
inode_lock(root->d_inode);
presumably because sb->s_root was NULL.
Fixes: 0da0b7fd73 ("afs: Display manually added cells in dynamic root mount")
Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6163a985e5 ]
efifb_probe() will issue an error message in case the kernel is booted
as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid
that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set.
Fixes: 38ac0287b7 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d85de3399f ]
If you right-click in the ConfigList window, you will see the following
messages in the console:
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906
QObject::connect: (sender name: 'config')
Right, there is no such slot in QAction. I think this is a typo of
setChecked.
Due to this bug, when you toggled the menu "Option->Show Name/Range/Data"
the state of the context menu was not previously updated. Fix this.
Fixes: d5d973c3f8 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa8de0a3bf ]
If you right-click the first row in the option tree, the pop-up menu
shows up, but if you right-click the second row or below, the event
is ignored due to the following check:
if (e->y() <= header()->geometry().bottom()) {
Perhaps, the intention was to show the pop-menu only when the tree
header was right-clicked, but this handler is not called in that case.
Since the origin of e->y() starts from the bottom of the header,
this check is odd.
Going forward, you can right-click anywhere in the tree to get the
pop-up menu.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb957adb4e ]
See the SDM, volume 3, section 4.4.1:
If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.
Fixes: b9baba8614 ("KVM, pkeys: expose CPUID/CR4 to guest")
Cc: Huaitong Han <huaitong.han@intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aae7a75a82 ]
The vfio_iommu_replay() function does not currently unwind on error,
yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma
structure to indicate IOMMU mapping. The IOMMU mappings are torn down
when the domain is destroyed, but the other actions go on to cause
trouble later. For example, the iommu->domain_list can be empty if we
only have a non-IOMMU backed mdev attached. We don't currently check
if the list is empty before getting the first entry in the list, which
leads to a bogus domain pointer. If a vfio_dma entry is erroneously
marked as iommu_mapped, we'll attempt to use that bogus pointer to
retrieve the existing physical page addresses.
This is the scenario that uncovered this issue, attempting to hot-add
a vfio-pci device to a container with an existing mdev device and DMA
mappings, one of which could not be pinned, causing a failure adding
the new group to the existing container and setting the conditions
for a subsequent attempt to explode.
To resolve this, we can first check if the domain_list is empty so
that we can reject replay of a bogus domain, should we ever encounter
this inconsistent state again in the future. The real fix though is
to add the necessary unwind support, which means cleaning up the
current pinning if an IOMMU mapping fails, then walking back through
the r-b tree of DMA entries, reading from the IOMMU which ranges are
mapped, and unmapping and unpinning those ranges. To be able to do
this, we also defer marking the DMA entry as IOMMU mapped until all
entries are processed, in order to allow the unwind to know the
disposition of each entry.
Fixes: a54eb55045 ("vfio iommu type1: Add support for mediated devices")
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd78c59446 ]
The key member of the runtime instrumentation control block contains
only the access key, not the complete storage key. Therefore the value
must be shifted by four bits. Since existing user space does not
necessarily query and set the access key correctly, just ignore the
user space provided key and use the correct one.
Note: this is only relevant for debugging purposes in case somebody
compiles a kernel with a default storage access key set to a value not
equal to zero.
Fixes: 262832bc5a ("s390/ptrace: add runtime instrumention register get/set")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9eaba29c79 ]
The key member of the runtime instrumentation control block contains
only the access key, not the complete storage key. Therefore the value
must be shifted by four bits.
Note: this is only relevant for debugging purposes in case somebody
compiles a kernel with a default storage access key set to a value not
equal to zero.
Fixes: e4b8b3f33f ("s390: add support for runtime instrumentation")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8327070216 ]
When we tear down a network namespace, we unregister all
the netdevices within it. So we may queue a slave device
and a bonding device together in the same unregister queue.
If the only slave device is non-ethernet, it would
automatically unregister the bonding device as well. Thus,
we may end up unregistering the bonding device twice.
Workaround this special case by checking reg_state.
Fixes: 9b5e383c11 ("net: Introduce unregister_netdevice_many()")
Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ae18a8268 ]
According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side
the required time interval between packets of a multipacket broadcast message
is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin
allowing for the maximumm spacing of 200ms). For receive side a timeout will
occur when a time of greater than 750 ms elapsed between two message packets
when more packets were expected.
So this patch fix and add rxtimer for multipacket broadcast session.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b8b2e3155 ]
If timeout occurs, j1939_tp_rxtimer() first calls hrtimer_start() to restart
rxtimer, and then calls __j1939_session_cancel() to set session->state =
J1939_SESSION_WAITING_ABORT. At next timeout expiration, because of the
J1939_SESSION_WAITING_ABORT session state j1939_tp_rxtimer() will call
j1939_session_deactivate_activate_next() to deactivate current session, and
rxtimer won't be set.
But for multipacket broadcast session, __j1939_session_cancel() don't set
session->state = J1939_SESSION_WAITING_ABORT, thus current session won't be
deactivate and hrtimer_start() is called to start new rxtimer again and again.
So fix it by moving session->state = J1939_SESSION_WAITING_ABORT out of if
(!j1939_cb_is_broadcast(&session->skcb)) statement.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-4-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4fd77fd87 ]
Currently j1939_tp_im_involved_anydir() in j1939_tp_recv() check the previously
set flags J1939_ECU_LOCAL_DST and J1939_ECU_LOCAL_SRC of incoming skb, thus
multipacket broadcast message was aborted by receive side because it may come
from remote ECUs and have no exact dst address. Similarly, j1939_tp_cmd_recv()
and j1939_xtp_rx_dat() didn't process broadcast message.
So fix it by checking and process broadcast message in j1939_tp_recv(),
j1939_tp_cmd_recv() and j1939_xtp_rx_dat().
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1596599425-5534-2-git-send-email-zhangchangzhong@huawei.com
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ca0d9ac3f ]
Broadcast mode bonds transmit a copy of all traffic simultaneously out of
all interfaces, so the "speed" of the bond isn't really the aggregate of
all interfaces, but rather, the speed of the slowest active interface.
Also, the type of the speed field is u32, not unsigned long, so adjust
that accordingly, as required to make min() function here without
complaining about mismatching types.
Fixes: bb5b052f75 ("bond: add support to read speed and duplex via ethtool")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bd5e02a2e ]
Trusted VF with unicast promiscuous mode set, could listen to TX
traffic of other VFs.
Set unicast promiscuous mode to RX traffic, if VSI has port VLAN
configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to
I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with
VLAN to the one without VLAN.
Fixes: 6c41a76069 ("i40e: Add promiscuous on VLAN support")
Fixes: 3b1200891b ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b43e3a82bc ]
In current J1939 stack implementation, we process all locally send
messages as own messages. Even if it was send by CAN_RAW socket.
To reproduce it use following commands:
testj1939 -P -r can0:0x80 &
cansend can0 18238040#0123
This step will trigger false positive not critical warning:
j1939_simple_recv: Received already invalidated message
With this patch we add additional check to make sure, related skb is own
echo message.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84f44df664 ]
Similar to patch ("bpf: sock_ops ctx access may stomp registers") if the
src_reg = dst_reg when reading the sk field of a sock_ops struct we
generate xlated code,
53: (61) r9 = *(u32 *)(r9 +28)
54: (15) if r9 == 0x0 goto pc+3
56: (79) r9 = *(u64 *)(r9 +0)
This stomps on the r9 reg to do the sk_fullsock check and then when
reading the skops->sk field instead of the sk pointer we get the
sk_fullsock. To fix use similar pattern noted in the previous fix
and use the temp field to save/restore a register used to do
sk_fullsock check.
After the fix the generated xlated code reads,
52: (7b) *(u64 *)(r9 +32) = r8
53: (61) r8 = *(u32 *)(r9 +28)
54: (15) if r9 == 0x0 goto pc+3
55: (79) r8 = *(u64 *)(r9 +32)
56: (79) r9 = *(u64 *)(r9 +0)
57: (05) goto pc+1
58: (79) r8 = *(u64 *)(r9 +32)
Here r9 register was in-use so r8 is chosen as the temporary register.
In line 52 r8 is saved in temp variable and at line 54 restored in case
fullsock != 0. Finally we handle fullsock == 0 case by restoring at
line 58.
This adds a new macro SOCK_OPS_GET_SK it is almost possible to merge
this with SOCK_OPS_GET_FIELD, but I found the extra branch logic a
bit more confusing than just adding a new macro despite a bit of
duplicating code.
Fixes: 1314ef5611 ("bpf: export bpf_sock for BPF_PROG_TYPE_SOCK_OPS prog type")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159718349653.4728.6559437186853473612.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 796a58fe2b ]
Most of the DAPM widgets for DSP ASoC components reuse reg field
of the widgets for its internal calculations, however these are not
real registers. So read/writes to these numbers are not really
valid. However ASoC core will read these registers to get default
state during startup.
With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.
To fix this add dummy read/write function to return default value.
Fixes: e3a33673e8 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200811120205.21805-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56235e4bc5 ]
Looks like the q6afe-dai dapm widget registers are set as "0",
which is a not correct.
As this registers will be read by ASoC core during startup
which will throw up errors, Fix this by making the registers
as SND_SOC_NOPM as these should be never used.
With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.
Fixes: 24c4cbcfac ("ASoC: qdsp6: q6afe: Add q6afe dai driver")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200811120205.21805-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b428336676 ]
On big-endian machine, the returned register data when the exthdr is
present is not being compared correctly because little-endian is
assumed. The function nft_cmp_fast_mask(), called by nft_cmp_fast_eval()
and nft_cmp_fast_init(), calls cpu_to_le32().
The following dump also shows that little endian is assumed:
$ nft --debug=netlink add rule ip recordroute forward ip option rr exists counter
ip
[ exthdr load ipv4 1b @ 7 + 0 present => reg 1 ]
[ cmp eq reg 1 0x01000000 ]
[ counter pkts 0 bytes 0 ]
Lastly, debug print in nft_cmp_fast_init() and nft_cmp_fast_eval() when
RR option exists in the packet shows that the comparison fails because
the assumption:
nft_cmp_fast_init:189 priv->sreg=4 desc.len=8 mask=0xff000000 data.data[0]=0x10003e0
nft_cmp_fast_eval:57 regs->data[priv->sreg=4]=0x1 mask=0xff000000 priv->data=0x1000000
v2: use nft_reg_store8() instead (Florian Westphal). Also to avoid the
warnings reported by kernel test robot.
Fixes: dbb5281a1f ("netfilter: nf_tables: add support for matching IPv4 options")
Fixes: c078ca3b0c ("netfilter: nft_exthdr: Add support for existence check")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf9a379d09 ]
Currently, add_system_zone() just silently merges two added system zones
that overlap. However the overlap should not happen and it generally
suggests that some unrelated metadata overlap which indicates the fs is
corrupted. We should have caught such problems earlier (e.g. in
ext4_check_descriptors()) but add this check as another line of defense.
In later patch we also use this for stricter checking of journal inode
extent tree.
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5872331b3d ]
If for any reason a directory passed to do_split() does not have enough
active entries to exceed half the size of the block, we can end up
iterating over all "count" entries without finding a split point.
In this case, count == move, and split will be zero, and we will
attempt a negative index into map[].
Guard against this by detecting this case, and falling back to
split-to-half-of-count instead; in this case we will still have
plenty of space (> half blocksize) in each split block.
Fixes: ef2b02d3e6 ("ext34: ensure do_split leaves enough free space in both blocks")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/f53e246b-647c-64bb-16ec-135383c70ad7@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96cf2a2c75 ]
If xfs_sysfs_init is called with parent_kobj == NULL, UBSAN
shows the following warning:
UBSAN: null-ptr-deref in ./fs/xfs/xfs_sysfs.h:37:23
member access within null pointer of type 'struct xfs_kobj'
Call Trace:
dump_stack+0x10e/0x195
ubsan_type_mismatch_common+0x241/0x280
__ubsan_handle_type_mismatch_v1+0x32/0x40
init_xfs_fs+0x12b/0x28f
do_one_initcall+0xdd/0x1d0
do_initcall_level+0x151/0x1b6
do_initcalls+0x50/0x8f
do_basic_setup+0x29/0x2b
kernel_init_freeable+0x19f/0x20b
kernel_init+0x11/0x1e0
ret_from_fork+0x22/0x30
Fix it by checking parent_kobj before the code accesses its member.
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor whitespace edits]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f45882cfb1 ]
camss_probe() does not free camss on error handling paths. The patch
introduces an additional error label for this purpose. Besides, it
removes call of v4l2_async_notifier_cleanup() from
camss_of_parse_ports() since its caller, camss_probe(), cleans up all
its resources itself.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 481a0d7422 ]
The loop may exist if vq->broken is true,
virtqueue_get_buf_ctx_packed or virtqueue_get_buf_ctx_split
will return NULL, so virtnet_poll will reschedule napi to
receive packet, it will lead cpu usage(si) to 100%.
call trace as below:
virtnet_poll
virtnet_receive
virtqueue_get_buf_ctx
virtqueue_get_buf_ctx_packed
virtqueue_get_buf_ctx_split
virtqueue_napi_complete
virtqueue_poll //return true
virtqueue_napi_schedule //it will reschedule napi
to fix this, return false if vq is broken in virtqueue_poll.
Signed-off-by: Mao Wenan <wenan.mao@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/1596354249-96204-1-git-send-email-wenan.mao@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4daca379c7 ]
The MSR_TURBO_RATIO_LIMIT can be 0. This is not an error. User can update
this MSR via BIOS settings on some systems or can use msr tools to update.
Also some systems boot with value = 0.
This results in display of cpufreq/cpuinfo_max_freq wrong. This value
will be equal to cpufreq/base_frequency, even though turbo is enabled.
But platform will still function normally in HWP mode as we get max
1-core frequency from the MSR_HWP_CAPABILITIES. This MSR is already used
to calculate cpu->pstate.turbo_freq, which is used for to set
policy->cpuinfo.max_freq. But some other places cpu->pstate.turbo_pstate
is used. For example to set policy->max.
To fix this, also update cpu->pstate.turbo_pstate when updating
cpu->pstate.turbo_freq.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 798b7347e4 ]
The log of UAF problem is listed below.
BUG: KASAN: use-after-free in jffs2_rmdir+0xa4/0x1cc [jffs2] at addr c1f165fc
Read of size 4 by task rm/8283
=============================================================================
BUG kmalloc-32 (Tainted: P B O ): kasan: bad access detected
-----------------------------------------------------------------------------
INFO: Allocated in 0xbbbbbbbb age=3054364 cpu=0 pid=0
0xb0bba6ef
jffs2_write_dirent+0x11c/0x9c8 [jffs2]
__slab_alloc.isra.21.constprop.25+0x2c/0x44
__kmalloc+0x1dc/0x370
jffs2_write_dirent+0x11c/0x9c8 [jffs2]
jffs2_do_unlink+0x328/0x5fc [jffs2]
jffs2_rmdir+0x110/0x1cc [jffs2]
vfs_rmdir+0x180/0x268
do_rmdir+0x2cc/0x300
ret_from_syscall+0x0/0x3c
INFO: Freed in 0x205b age=3054364 cpu=0 pid=0
0x2e9173
jffs2_add_fd_to_list+0x138/0x1dc [jffs2]
jffs2_add_fd_to_list+0x138/0x1dc [jffs2]
jffs2_garbage_collect_dirent.isra.3+0x21c/0x288 [jffs2]
jffs2_garbage_collect_live+0x16bc/0x1800 [jffs2]
jffs2_garbage_collect_pass+0x678/0x11d4 [jffs2]
jffs2_garbage_collect_thread+0x1e8/0x3b0 [jffs2]
kthread+0x1a8/0x1b0
ret_from_kernel_thread+0x5c/0x64
Call Trace:
[c17ddd20] [c02452d4] kasan_report.part.0+0x298/0x72c (unreliable)
[c17ddda0] [d2509680] jffs2_rmdir+0xa4/0x1cc [jffs2]
[c17dddd0] [c026da04] vfs_rmdir+0x180/0x268
[c17dde00] [c026f4e4] do_rmdir+0x2cc/0x300
[c17ddf40] [c001a658] ret_from_syscall+0x0/0x3c
The root cause is that we don't get "jffs2_inode_info.sem" before
we scan list "jffs2_inode_info.dents" in function jffs2_rmdir.
This patch add codes to get "jffs2_inode_info.sem" before we scan
"jffs2_inode_info.dents" to slove the UAF problem.
Signed-off-by: Zhe Li <lizhe67@huawei.com>
Reviewed-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f959b5d037 ]
xfs_trans_dqresv is the function that we use to make reservations
against resource quotas. Each resource contains two counters: the
q_core counter, which tracks resources allocated on disk; and the dquot
reservation counter, which tracks how much of that resource has either
been allocated or reserved by threads that are working on metadata
updates.
For disk blocks, we compare the proposed reservation counter against the
hard and soft limits to decide if we're going to fail the operation.
However, for inodes we inexplicably compare against the q_core counter,
not the incore reservation count.
Since the q_core counter is always lower than the reservation count and
we unlock the dquot between reservation and transaction commit, this
means that multiple threads can reserve the last inode count before we
hit the hard limit, and when they commit, we'll be well over the hard
limit.
Fix this by checking against the incore inode reservation counter, since
we would appear to maintain that correctly (and that's what we report in
GETQUOTA).
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64d2642251 ]
During a connection tear down, the Receive queue is flushed before
the device resources are freed. Typically, all the Receives flush
with IB_WR_FLUSH_ERR.
However, any pending successful Receives flush with IB_WR_SUCCESS,
and the server automatically posts a fresh Receive to replace the
completing one. This happens even after the connection has closed
and the RQ is drained. Receives that are posted after the RQ is
drained appear never to complete, causing a Receive resource leak.
The leaked Receive buffer is left DMA-mapped.
To prevent these late-posted recv_ctxt's from leaking, block new
Receive posting after XPT_CLOSE is set.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdee0e793c ]
The Cache Control Register (CACR) of the ColdFire V3 has bits that
control high level caching functions, and also enable/disable the use
of the alternate stack pointer register (the EUSP bit) to provide
separate supervisor and user stack pointer registers. The code as
it is today will blindly clear the EUSP bit on cache actions like
invalidation. So it is broken for this case - and that will result
in failed booting (interrupt entry and exit processing will be
completely hosed).
This only affects ColdFire V3 parts that support the alternate stack
register (like the 5329 for example) - generally speaking new parts do,
older parts don't. It has no impact on ColdFire V3 parts with the single
stack pointer, like the 5307 for example.
Fix the cache bit defines used, so they maintain the EUSP bit when
carrying out cache actions through the CACR register.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1ce9716f3 ]
Use 0 as the align parameter in memblock_find_in_range() is
incorrect when we reserve memory for Crash kernel.
The environment as follows:
[ 0.000000] MIPS: machine is loongson,loongson64c-4core-rs780e
...
[ 1.951016] crashkernel=64M@128M
The warning as follows:
[ 0.000000] Invalid memory region reserved for crash kernel
And the iomem as follows:
00200000-0effffff : System RAM
04000000-0484009f : Kernel code
048400a0-04ad7fff : Kernel data
04b40000-05c4c6bf : Kernel bss
1a000000-1bffffff : pci@1a000000
...
The align parameter may be finally used by round_down() or round_up().
Like the following call tree:
mips-next: mm/memblock.c
memblock_find_in_range
└── memblock_find_in_range_node
├── __memblock_find_range_bottom_up
│ └── round_up
└── __memblock_find_range_top_down
└── round_down
\#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
\#define round_down(x, y) ((x) & ~__round_mask(x, y))
\#define __round_mask(x, y) ((__typeof__(x))((y)-1))
The round_down(or round_up)'s second parameter must be a power of 2.
If the second parameter is 0, it both will return 0.
Use 1 as the parameter to fix the bug and the iomem as follows:
00200000-0effffff : System RAM
04000000-0484009f : Kernel code
048400a0-04ad7fff : Kernel data
04b40000-05c4c6bf : Kernel bss
08000000-0bffffff : Crash kernel
1a000000-1bffffff : pci@1a000000
...
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c487b0b0e ]
If platform_driver_register() fails within vpss_init() resources are not
cleaned up. The patch fixes this issue by introducing the corresponding
error handling.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc0456458d ]
budget_register() has no error handling after its failure.
Add the missed undo functions for error handling to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4501bac0e ]
dev_pm_opp_set_rate() can now be called with freq = 0 in order
to either drop performance or bandwidth votes or to disable
regulators on platforms which support them.
In such cases, a subsequent call to dev_pm_opp_set_rate() with
the same frequency ends up returning early because 'old_freq == freq'
Instead make it fall through and put back the dropped performance
and bandwidth votes and/or enable back the regulators.
Cc: v5.3+ <stable@vger.kernel.org> # v5.3+
Fixes: cd7ea58286 ("opp: Make dev_pm_opp_set_rate() handle freq = 0 to drop performance votes")
Reported-by: Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[ Viresh: Don't skip clk_set_rate() and massaged changelog ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 26c7295be0 upstream.
when we create a kthread with ktrhead_create_on_cpu(),the child thread
entry is ktread.c:ktrhead() which will be preempted by the parent after
call complete(done) while schedule() is not called yet,then the parent
will call wait_task_inactive(child) but the child is still on the runqueue,
so the parent will schedule_hrtimeout() for 1 jiffy,it will waste a lot of
time,especially on startup.
parent child
ktrhead_create_on_cpu()
wait_fo_completion(&done) -----> ktread.c:ktrhead()
|----- complete(done);--wakeup and preempted by parent
kthread_bind() <------------| |-> schedule();--dequeue here
wait_task_inactive(child) |
schedule_hrtimeout(1 jiffy) -|
So we hope the child just wakeup parent but not preempted by parent, and the
child is going to call schedule() soon,then the parent will not call
schedule_hrtimeout(1 jiffy) as the child is already dequeue.
The same issue for ktrhead_park()&&kthread_parkme().
This patch can save 120ms on rk312x startup with CONFIG_HZ=300.
Signed-off-by: Liang Chen <cl@rock-chips.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20200306070133.18335-2-cl@rock-chips.com
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b24bdc37d0 upstream.
[Why]
Resuming from suspend, CEA blocks from EDID are not parsed and no video
modes can support YUV420. When this happens, output bpc cannot go over
8-bit with 4K modes on HDMI.
[How]
In amdgpu_dm_update_connector_after_detect(), drm_add_edid_modes() is
called after drm_connector_update_edid_property() to fully parse EDID
and update display info.
Cc: stable@vger.kernel.org
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f41ed88cbd upstream.
GFP_KERNEL may and will sleep, and this is being executed in
a non-preemptible context; this will mess things up since it's
called inbetween DC_FP_START/END, and rescheduling will result
in the DC_FP_END later being called in a different context (or
just crashing if any floating point/vector registers/instructions
are used after the call is resumed in a different context).
Signed-off-by: Daniel Kolesa <daniel@octaforge.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d9a2c5f58 upstream.
Before v4.15 commit 75492a5156 ("s390/scsi: Convert timers to use
timer_setup()"), we intentionally only passed zfcp_adapter as context
argument to zfcp_fsf_request_timeout_handler(). Since we only trigger
adapter recovery, it was unnecessary to sync against races between timeout
and (late) completion. Likewise, we only passed zfcp_erp_action as context
argument to zfcp_erp_timeout_handler(). Since we only wakeup an ERP action,
it was unnecessary to sync against races between timeout and (late)
completion.
Meanwhile the timeout handlers get timer_list as context argument and do a
timer-specific container-of to zfcp_fsf_req which can have been freed.
Fix it by making sure that any request timeout handlers, that might just
have started before del_timer(), are completed by using del_timer_sync()
instead. This ensures the request free happens afterwards.
Space time diagram of potential use-after-free:
Basic idea is to have 2 or more pending requests whose timeouts run out at
almost the same time.
req 1 timeout ERP thread req 2 timeout
---------------- ---------------- ---------------------------------------
zfcp_fsf_request_timeout_handler
fsf_req = from_timer(fsf_req, t, timer)
adapter = fsf_req->adapter
zfcp_qdio_siosl(adapter)
zfcp_erp_adapter_reopen(adapter,...)
zfcp_erp_strategy
...
zfcp_fsf_req_dismiss_all
list_for_each_entry_safe
zfcp_fsf_req_complete 1
del_timer 1
zfcp_fsf_req_free 1
zfcp_fsf_req_complete 2
zfcp_fsf_request_timeout_handler
del_timer 2
fsf_req = from_timer(fsf_req, t, timer)
zfcp_fsf_req_free 2
adapter = fsf_req->adapter
^^^^^^^ already freed
Link: https://lore.kernel.org/r/20200813152856.50088-1-maier@linux.ibm.com
Fixes: 75492a5156 ("s390/scsi: Convert timers to use timer_setup()")
Cc: <stable@vger.kernel.org> #4.15+
Suggested-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7303cb5bfe upstream.
ext4_search_dir() and ext4_generic_delete_entry() can be called both for
standard director blocks and for inline directories stored inside inode
or inline xattr space. For the second case we didn't call
ext4_check_dir_entry() with proper constraints that could result in
accepting corrupted directory entry as well as false positive filesystem
errors like:
EXT4-fs error (device dm-0): ext4_search_dir:1395: inode #28320400:
block 113246792: comm dockerd: bad entry in directory: directory entry too
close to block end - offset=0, inode=28320403, rec_len=32, name_len=8,
size=4096
Fix the arguments passed to ext4_check_dir_entry().
Fixes: 109ba779d6 ("ext4: check for directory entries too close to block end")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200731162135.8080-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b25e8e85e7 upstream.
The following message occurs when running an AI application with TID RDMA
enabled:
hfi1 0000:7f:00.0: hfi1_0: [QP74] hfi1_tid_timeout 4084
hfi1 0000:7f:00.0: hfi1_0: [QP70] hfi1_tid_timeout 4084
The issue happens when TID RDMA WRITE request is followed by an
IB_WR_RDMA_WRITE_WITH_IMM request, the latter could be completed first on
the responder side. As a result, no ACK packet for the latter could be
sent because the TID RDMA WRITE request is still being processed on the
responder side.
When the TID RDMA WRITE request is eventually completed, the requester
will wait for the IB_WR_RDMA_WRITE_WITH_IMM request to be acknowledged.
If the next request is another TID RDMA WRITE request, no TID RDMA WRITE
DATA packet could be sent because the preceding IB_WR_RDMA_WRITE_WITH_IMM
request is not completed yet.
Consequently the IB_WR_RDMA_WRITE_WITH_IMM will be retried but it will be
ignored on the responder side because the responder thinks it has already
been completed. Eventually the retry will be exhausted and the qp will be
put into error state on the requester side. On the responder side, the TID
resource timer will eventually expire because no TID RDMA WRITE DATA
packets will be received for the second TID RDMA WRITE request. There is
also risk of a write-after-write memory corruption due to the issue.
Fix by adding a requester side interlock to prevent any potential data
corruption and TID RDMA protocol error.
Fixes: a0b34f75ec ("IB/hfi1: Add interlock between a TID RDMA request and other requests")
Link: https://lore.kernel.org/r/20200811174931.191210.84093.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org> # 5.4.x+
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88e8ac11d2 upstream.
The following race is observed with the repeated online, offline and a
delay between two successive online of memory blocks of movable zone.
P1 P2
Online the first memory block in
the movable zone. The pcp struct
values are initialized to default
values,i.e., pcp->high = 0 &
pcp->batch = 1.
Allocate the pages from the
movable zone.
Try to Online the second memory
block in the movable zone thus it
entered the online_pages() but yet
to call zone_pcp_update().
This process is entered into
the exit path thus it tries
to release the order-0 pages
to pcp lists through
free_unref_page_commit().
As pcp->high = 0, pcp->count = 1
proceed to call the function
free_pcppages_bulk().
Update the pcp values thus the
new pcp values are like, say,
pcp->high = 378, pcp->batch = 63.
Read the pcp's batch value using
READ_ONCE() and pass the same to
free_pcppages_bulk(), pcp values
passed here are, batch = 63,
count = 1.
Since num of pages in the pcp
lists are less than ->batch,
then it will stuck in
while(list_empty(list)) loop
with interrupts disabled thus
a core hung.
Avoid this by ensuring free_pcppages_bulk() is called with proper count of
pcp list pages.
The mentioned race is some what easily reproducible without [1] because
pcp's are not updated for the first memory block online and thus there is
a enough race window for P2 between alloc+free and pcp struct values
update through onlining of second memory block.
With [1], the race still exists but it is very narrow as we update the pcp
struct values for the first memory block online itself.
This is not limited to the movable zone, it could also happen in cases
with the normal zone (e.g., hotplug to a node that only has DMA memory, or
no other memory yet).
[1]: https://patchwork.kernel.org/patch/11696389/
Fixes: 5f8dcc2121 ("page-allocator: split per-cpu list into one-list-per-migrate-type")
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: <stable@vger.kernel.org> [2.6+]
Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e08d3fdfe2 upstream.
The lowmem_reserve arrays provide a means of applying pressure against
allocations from lower zones that were targeted at higher zones. Its
values are a function of the number of pages managed by higher zones and
are assigned by a call to the setup_per_zone_lowmem_reserve() function.
The function is initially called at boot time by the function
init_per_zone_wmark_min() and may be called later by accesses of the
/proc/sys/vm/lowmem_reserve_ratio sysctl file.
The function init_per_zone_wmark_min() was moved up from a module_init to
a core_initcall to resolve a sequencing issue with khugepaged.
Unfortunately this created a sequencing issue with CMA page accounting.
The CMA pages are added to the managed page count of a zone when
cma_init_reserved_areas() is called at boot also as a core_initcall. This
makes it uncertain whether the CMA pages will be added to the managed page
counts of their zones before or after the call to
init_per_zone_wmark_min() as it becomes dependent on link order. With the
current link order the pages are added to the managed count after the
lowmem_reserve arrays are initialized at boot.
This means the lowmem_reserve values at boot may be lower than the values
used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the
ratio values are unchanged.
In many cases the difference is not significant, but for example
an ARM platform with 1GB of memory and the following memory layout
cma: Reserved 256 MiB at 0x0000000030000000
Zone ranges:
DMA [mem 0x0000000000000000-0x000000002fffffff]
Normal empty
HighMem [mem 0x0000000030000000-0x000000003fffffff]
would result in 0 lowmem_reserve for the DMA zone. This would allow
userspace to deplete the DMA zone easily.
Funnily enough
$ cat /proc/sys/vm/lowmem_reserve_ratio
would fix up the situation because as a side effect it forces
setup_per_zone_lowmem_reserve.
This commit breaks the link order dependency by invoking
init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages
have the chance to be properly accounted in their zone(s) and allowing
the lowmem_reserve arrays to receive consistent values.
Fixes: bc22af74f2 ("mm: update min_free_kbytes from khugepaged after core initialization")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcf85fcedf upstream.
romfs has a superblock field that limits the size of the filesystem; data
beyond that limit is never accessed.
romfs_dev_read() fetches a caller-supplied number of bytes from the
backing device. It returns 0 on success or an error code on failure;
therefore, its API can't represent short reads, it's all-or-nothing.
However, when romfs_dev_read() detects that the requested operation would
cross the filesystem size limit, it currently silently truncates the
requested number of bytes. This e.g. means that when the content of a
file with size 0x1000 starts one byte before the filesystem size limit,
->readpage() will only fill a single byte of the supplied page while
leaving the rest uninitialized, leaking that uninitialized memory to
userspace.
Fix it by returning an error code instead of truncating the read when the
requested read operation would go beyond the end of the filesystem.
Fixes: da4458bda2 ("NOMMU: Make it possible for RomFS to use MTD devices directly")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ddf75be47c upstream.
CONFIG_OF_DYNAMIC and CONFIG_ACPI allow adding SPI devices at runtime
using a DeviceTree overlay or DSDT patch. CONFIG_SPI_SLAVE allows the
same via sysfs.
But there are no precautions to prevent adding a device below a
controller that's being removed. Such a device is unusable and may not
even be able to unbind cleanly as it becomes inaccessible once the
controller has been torn down. E.g. it is then impossible to quiesce
the device's interrupt.
of_spi_notify() and acpi_spi_notify() do hold a ref on the controller,
but otherwise run lockless against spi_unregister_controller().
Fix by holding the spi_add_lock in spi_unregister_controller() and
bailing out of spi_add_device() if the controller has been unregistered
concurrently.
Fixes: ce79d54ae4 ("spi/of: Add OF notifier handler")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.19+
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Link: https://lore.kernel.org/r/a8c3205088a969dc8410eec1eba9aface60f36af.1596451035.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd3b3636c9 upstream.
The current stack implementation do not support ECTS requests of not
aligned TP sized blocks.
If ECTS will request a block with size and offset spanning two TP
blocks, this will cause memcpy() to read beyond the queued skb (which
does only contain one TP sized block).
Sometimes KASAN will detect this read if the memory region beyond the
skb was previously allocated and freed. In other situations it will stay
undetected. The ETP transfer in any case will be corrupted.
This patch adds a sanity check to avoid this kind of read and abort the
session with error J1939_XTP_ABORT_ECTS_TOO_BIG.
Reported-by: syzbot+5322482fe520b02aea30@syzkaller.appspotmail.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-3-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bf31f87f71 ]
The status of aborted transaction can change between calls and it needs
to be accessed by READ_ONCE. Add a helper that also wraps the unlikely
hint.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric reported seeing this message while running generic/475
BTRFS: error (device dm-3) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted
Full stack trace:
BTRFS: error (device dm-0) in btrfs_commit_transaction:2323: errno=-5 IO failure (Error while writing out transaction)
BTRFS info (device dm-0): forced readonly
BTRFS warning (device dm-0): Skipping commit of aborted transaction.
------------[ cut here ]------------
BTRFS: error (device dm-0) in cleanup_transaction:1894: errno=-5 IO failure
BTRFS: Transaction aborted (error -117)
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6480 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6488 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6490 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6498 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64c0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85e8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85f0 len 4096 err no 10
WARNING: CPU: 3 PID: 23985 at fs/btrfs/tree-log.c:3084 btrfs_sync_log+0xbc8/0xd60 [btrfs]
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4288 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4290 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4298 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c0 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c8 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42d0 len 4096 err no 10
CPU: 3 PID: 23985 Comm: fsstress Tainted: G W L 5.8.0-rc4-default+ #1181
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
RIP: 0010:btrfs_sync_log+0xbc8/0xd60 [btrfs]
RSP: 0018:ffff909a44d17bd0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001
RDX: ffff8f3be41cb940 RSI: ffffffffb0108d2b RDI: ffffffffb0108ff7
RBP: ffff909a44d17e70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000037988 R12: ffff8f3bd20e4000
R13: ffff8f3bd20e4428 R14: 00000000ffffff8b R15: ffff909a44d17c70
FS: 00007f6a6ed3fb80(0000) GS:ffff8f3c3dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6a6ed3e000 CR3: 00000000525c0003 CR4: 0000000000160ee0
Call Trace:
? finish_wait+0x90/0x90
? __mutex_unlock_slowpath+0x45/0x2a0
? lock_acquire+0xa3/0x440
? lockref_put_or_lock+0x9/0x30
? dput+0x20/0x4a0
? dput+0x20/0x4a0
? do_raw_spin_unlock+0x4b/0xc0
? _raw_spin_unlock+0x1f/0x30
btrfs_sync_file+0x335/0x490 [btrfs]
do_fsync+0x38/0x70
__x64_sys_fsync+0x10/0x20
do_syscall_64+0x50/0xe0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f6a6ef1b6e3
Code: Bad RIP value.
RSP: 002b:00007ffd01e20038 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
RAX: ffffffffffffffda RBX: 000000000007a120 RCX: 00007f6a6ef1b6e3
RDX: 00007ffd01e1ffa0 RSI: 00007ffd01e1ffa0 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000001 R09: 00007ffd01e2004c
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000009f
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00
softirqs last enabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace af146e0e38433456 ]---
BTRFS: error (device dm-0) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted
This ret came from btrfs_write_marked_extents(). If we get an aborted
transaction via EIO before, we'll see it in btree_write_cache_pages()
and return EUCLEAN, which gets printed as "Filesystem corrupted".
Except we shouldn't be returning EUCLEAN here, we need to be returning
EROFS because EUCLEAN is reserved for actual corruption, not IO errors.
We are inconsistent about our handling of BTRFS_FS_STATE_ERROR
elsewhere, but we want to use EROFS for this particular case. The
original transaction abort has the real error code for why we ended up
with an aborted transaction, all subsequent actions just need to return
EROFS because they may not have a trans handle and have no idea about
the original cause of the abort.
After patch "btrfs: don't WARN if we abort a transaction with EROFS" the
stacktrace will not be dumped either.
Reported-by: Eric Sandeen <esandeen@redhat.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add full test stacktrace ]
Signed-off-by: David Sterba <dsterba@suse.com>
[ Upstream commit 3ef3959b29 ]
Chris Murphy reported a problem where rpm ostree will bind mount a bunch
of things for whatever voodoo it's doing. But when it does this
/proc/mounts shows something like
/dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0
/dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo/bar 0 0
Despite subvolid=256 being subvol=/foo. This is because we're just
spitting out the dentry of the mount point, which in the case of bind
mounts is the source path for the mountpoint. Instead we should spit
out the path to the actual subvol. Fix this by looking up the name for
the subvolid we have mounted. With this fix the same test looks like
this
/dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0
/dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo 0 0
Reported-by: Chris Murphy <chris@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0c907a47d ]
The functions will be used outside of export.c and super.c to allow
resolving subvolume name from a given id, eg. for subvolume deletion by
id ioctl.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ split from the next patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65f0f017e7 ]
For some block devices which large capacity (e.g. 8TB) but small io_opt
size (e.g. 8 sectors), in bcache_device_init() the stripes number calcu-
lated by,
DIV_ROUND_UP_ULL(sectors, d->stripe_size);
might be overflow to the unsigned int bcache_device->nr_stripes.
This patch uses the uint64_t variable to store DIV_ROUND_UP_ULL()
and after the value is checked to be available in unsigned int range,
sets it to bache_device->nr_stripes. Then the overflow is avoided.
Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbe98f9cad ]
Move collapse_huge_page()'s mmget_still_valid() check into
khugepaged_test_exit() itself. collapse_huge_page() is used for anon THP
only, and earned its mmget_still_valid() check because it inserts a huge
pmd entry in place of the page table's pmd entry; whereas
collapse_file()'s retract_page_tables() or collapse_pte_mapped_thp()
merely clears the page table's pmd entry. But core dumping without mmap
lock must have been as open to mistaking a racily cleared pmd entry for a
page table at physical page 0, as exit_mmap() was. And we certainly have
no interest in mapping as a THP once dumping core.
Fixes: 59ea6d06cf ("coredump: fix race condition between collapse_huge_page() and core dumping")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org> [4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021217020.27773@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12d572e785 ]
Fix the memory leakage in debuginfo__find_trace_events() when the probe
point is not found in the debuginfo. If there is no probe point found in
the debuginfo, debuginfo__find_probes() will NOT return -ENOENT, but 0.
Thus the caller of debuginfo__find_probes() must check the tf.ntevs and
release the allocated memory for the array of struct probe_trace_event.
The current code releases the memory only if the debuginfo__find_probes()
hits an error but not checks tf.ntevs. In the result, the memory allocated
on *tevs are not released if tf.ntevs == 0.
This fixes the memory leakage by checking tf.ntevs == 0 in addition to
ret < 0.
Fixes: ff74178350 ("perf probe: Introduce debuginfo to encapsulate dwarf information")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/159438668346.62703.10887420400718492503.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70499cdfeb ]
Before this patch, some functions started transactions then they called
gfs2_block_zero_range. However, gfs2_block_zero_range, like writes, can
start transactions, which results in a recursive transaction error.
For example:
do_shrink
trunc_start
gfs2_trans_begin <------------------------------------------------
gfs2_block_zero_range
iomap_zero_range(inode, from, length, NULL, &gfs2_iomap_ops);
iomap_apply ... iomap_zero_range_actor
iomap_begin
gfs2_iomap_begin
gfs2_iomap_begin_write
actor (iomap_zero_range_actor)
iomap_zero
iomap_write_begin
gfs2_iomap_page_prepare
gfs2_trans_begin <------------------------
This patch reorders the callers of gfs2_block_zero_range so that they
only start their transactions after the call. It also adds a BUG_ON to
ensure this doesn't happen again.
Fixes: 2257e468a6 ("gfs2: implement gfs2_block_zero_range using iomap_zero_range")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39c3a948ec ]
When punching a hole in a file, use filemap_write_and_wait_range to
write back any dirty pages in the range of the hole. As a side effect,
if the hole isn't page aligned, this marks unaligned pages at the
beginning and the end of the hole read-only. This is required when the
block size is smaller than the page size: when those pages are written
to again after the hole punching, we must make sure that page_mkwrite is
called for those pages so that the page will be fully allocated and any
blocks turned into holes from the hole punching will be reallocated.
(If a page is writably mapped, page_mkwrite won't be called.)
Fixes xfstest generic/567.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 119c53d2d4 ]
drm_gem_dumb_map_offset() now exists and does everything
vgem_gem_dump_map does and *ought* to do.
In particular, vgem_gem_dumb_map() was trying to reject mmapping an
imported dmabuf by checking the existence of obj->filp. Unfortunately,
we always allocated an obj->filp, even if unused for an imported dmabuf.
Instead, the drm_gem_dumb_map_offset(), since commit 90378e5891
("drm/gem: drm_gem_dumb_map_offset(): reject dma-buf"), uses the
obj->import_attach to reject such invalid mmaps.
This prevents vgem from allowing userspace mmapping the dumb handle and
attempting to incorrectly fault in remote pages belonging to another
device, where there may not even be a struct page.
v2: Use the default drm_gem_dumb_map_offset() callback
Fixes: af33a9190d ("drm/vgem: Enable dmabuf import interfaces")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.13+
Link: https://patchwork.freedesktop.org/patch/msgid/20200708154911.21236-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a0d1c951ef upstream.
As Documentation/kbuild/llvm.rst implies, building the kernel with a
full set of LLVM tools gets very verbose and unwieldy.
Provide a single switch LLVM=1 to use Clang and LLVM tools instead
of GCC and Binutils. You can pass it from the command line or as an
environment variable.
Please note LLVM=1 does not turn on the integrated assembler. You need
to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the
integrated assembler, I think we can make it default.
We discussed what we need, and we agreed to go with a simple boolean
flag that switches both target and host tools:
https://lkml.org/lkml/2020/3/28/494https://lkml.org/lkml/2020/4/3/43
Some items discussed, but not adopted:
- LLVM_DIR
When multiple versions of LLVM are installed, I just thought supporting
LLVM_DIR=/path/to/my/llvm/bin/ might be useful.
CC = $(LLVM_DIR)clang
LD = $(LLVM_DIR)ld.lld
...
However, we can handle this by modifying PATH. So, we decided to not do
this.
- LLVM_SUFFIX
Some distributions (e.g. Debian) package specific versions of LLVM with
naming conventions that use the version as a suffix.
CC = clang$(LLVM_SUFFIX)
LD = ld.lld(LLVM_SUFFIX)
...
will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc.,
but the suffixed versions in /usr/bin/ are symlinks to binaries in
/usr/lib/llvm-#/bin/, so this can also be handled by PATH.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e20e47c70 upstream.
The 'AS' variable is unused for building the kernel. Only the remaining
usage is to turn on the integrated assembler. A boolean flag is a better
fit for this purpose.
AS=clang was added for experts. So, I replaced it with LLVM_IAS=1,
breaking the backward compatibility.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa824e0c96 upstream.
As commit 5ef872636c ("kbuild: get rid of misleading $(AS) from
documents") noted, we rarely use $(AS) directly in the kernel build.
Now that the only/last user of $(AS) in drivers/net/wan/Makefile was
converted to $(CC), $(AS) is no longer used in the build process.
You can still pass in AS=clang, which is just a switch to turn on
the LLVM integrated assembler.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eefb8c124f upstream.
Introduce a new READELF variable to top-level Makefile, so the name of
readelf binary can be specified.
Before this change the name of the binary was hardcoded to
"$(CROSS_COMPILE)readelf" which might not be present for every
toolchain.
This allows to build with LLVM Object Reader by using make parameter
READELF=llvm-readelf.
Link: https://github.com/ClangBuiltLinux/linux/issues/771
Signed-off-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 734f3719d3 upstream.
The firmware source, wanxlfw.S, is currently compiled by the combo of
$(CPP) and $(M68KAS). This is not what we usually do for compiling *.S
files. In fact, this Makefile is the only user of $(AS) in the kernel
build.
Instead of combining $(CPP) and (AS) from different tool sets, using
$(M68KCC) as an assembler driver is simpler, and saner.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63b903dfeb upstream.
As far as I understood from the Kconfig help text, this build rule is
used to rebuild the driver firmware, which runs on an old m68k-based
chip. So, you need m68k tools for the firmware rebuild.
wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI.
So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other
words, ifeq ($(ARCH),m68k) is false here.
I am keeping the dead code for now, but rebuilding the firmware requires
'as68k' and 'ld68k', which I do not have in hand.
Instead, the kernel.org m68k GCC [1] successfully built it.
Allowing a user to pass in CROSS_COMPILE_M68K= is handier.
[1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable the driver for the Sensirion SPS30 particulate matter sensor.
The i2c-sensor overlay already has support for the device, but it does
nothing without also having the driver module.
See: https://github.com/raspberrypi/firmware/issues/1460
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
The commit being reverted has been seen to prevent booting with an eMMC
supposedly capable of running at 1.8V in an SD adaptor.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
The cpus node was originally deleted to match the then downstream
version of the BCM2835 DTS files, but doing so doesn't seem to make
any material difference. Its presence is necessary for the CPUFREQ_DT
support that is planned in the near future, so remove the deletion.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
In bcm2835_isp_s_ctrl, the error check for dma_buf_get() is incorrect,
and considers ERR_PTR pointers as valid dmabufs. Fix this error check.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
commit 8b0379a857 upstream.
[Why]
ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk
according to bandwidth requirement. call stack: rv1_update_clocks -->
update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth
--> prepare_bandwidth / optimize_bandwidth. before change dcn hw,
prepare_bandwidth will be called first to allow enough clock,
watermark for change, after end of dcn hw change, optimize_bandwidth
is executed to lower clock to save power for new dcn hw settings.
below is sequence of commit_planes_for_stream:
step 1: prepare_bandwidth - raise clock to have enough bandwidth
step 2: lock_doublebuffer_enable
step 3: pipe_control_lock(true) - make dchubp register change will
not take effect right way
step 4: apply_ctx_for_surface - program dchubp
step 5: pipe_control_lock(false) - dchubp register change take effect
step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream
for full_date, optimize clock to save power
at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be
changed for new dchubp configuration. but real dcn hub dchubps are
still running with old configuration until end of step 5. this need
clocks settings at step 1 should not less than that before step 1.
this is checked by two conditions: 1. if (should_set_clock(safe_to_lower
, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) ||
new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz)
2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz
the second condition is based on new dchubp configuration. dppclk
for new dchubp may be different from dppclk before step 1.
for example, before step 1, dchubps are as below:
pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979)
pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080)
for dppclk for pipe0 need dppclk = dispclk
new dchubp pipe split configuration:
pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080)
pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080)
dppclk only needs dppclk = dispclk /2.
dispclk, dppclk are not lock by otg master lock. they take effect
after step 1. during this transition, dispclk are the same, but
dppclk is changed to half of previous clock for old dchubp
configuration between step 1 and step 6. This may cause p-state
warning intermittently.
[How]
for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we
need make sure dppclk are not changed to less between step 1 and 6.
for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz,
new display clock is raised, but we do not know ratio of
new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz,
new_clocks->dispclk_khz /2 does not guarantee equal or higher than
old dppclk. we could ignore power saving different between
dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6.
as long as safe_to_lower = false, set dpclk = dispclk to simplify
condition check.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f878122841 upstream.
Reproducing bug report here:
After hibernating and resuming, DPM is not enabled. This remains the case
even if you test hibernate using the steps here:
https://www.kernel.org/doc/html/latest/power/basic-pm-debugging.html
I debugged the problem, and figured out that in the file hardwaremanager.c,
in the function, phm_enable_dynamic_state_management(), the check
'if (!hwmgr->pp_one_vf && smum_is_dpm_running(hwmgr) && !amdgpu_passthrough(adev) && adev->in_suspend)'
returns true for the hibernate case, and false for the suspend case.
This means that for the hibernate case, the AMDGPU driver doesn't enable DPM
(even though it should) and simply returns from that function.
In the suspend case, it goes ahead and enables DPM, even though it doesn't need to.
I debugged further, and found out that in the case of suspend, for the
CIK/Hawaii GPUs, smum_is_dpm_running(hwmgr) returns false, while in the case of
hibernate, smum_is_dpm_running(hwmgr) returns true.
For CIK, the ci_is_dpm_running() function calls the ci_is_smc_ram_running() function,
which is ultimately used to determine if DPM is currently enabled or not,
and this seems to provide the wrong answer.
I've changed the ci_is_dpm_running() function to instead use the same method that
some other AMD GPU chips do (e.g Fiji), which seems to read the voltage controller.
I've tested on my R9 390 and it seems to work correctly for both suspend and
hibernate use cases, and has been stable so far.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208839
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a34a0a632d upstream.
drm_dp_mst_allocate_vcpi() invokes
drm_dp_mst_topology_get_port_validated(), which increases the refcount
of the "port".
These reference counting issues take place in two exception handling
paths separately. Either when “slots” is less than 0 or when
drm_dp_init_vcpi() returns a negative value, the function forgets to
reduce the refcnt increased drm_dp_mst_topology_get_port_validated(),
which results in a refcount leak.
Fix these issues by pulling up the error handling when "slots" is less
than 0, and calling drm_dp_mst_topology_put_port() before termination
when drm_dp_init_vcpi() returns a negative value.
Fixes: 1e797f556c ("drm/dp: Split drm_dp_mst_allocate_vcpi")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5253cb8c00 upstream.
The maker of this board and its variants, stores MAC address in U-Boot
environment. Add alias for bootloader to recognise, to which ethernet
node inject the factory MAC address.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
[pali: Backported to 5.4 and older versions]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18e77600f7 upstream.
Only once have I seen this scenario (and forgot even to notice what forced
the eventual crash): a sequence of "BUG: Bad page map" alerts from
vm_normal_page(), from zap_pte_range() servicing exit_mmap();
pmd:00000000, pte values corresponding to data in physical page 0.
The pte mappings being zapped in this case were supposed to be from a huge
page of ext4 text (but could as well have been shmem): my belief is that
it was racing with collapse_file()'s retract_page_tables(), found *pmd
pointing to a page table, locked it, but *pmd had become 0 by the time
start_pte was decided.
In most cases, that possibility is excluded by holding mmap lock; but
exit_mmap() proceeds without mmap lock. Most of what's run by khugepaged
checks khugepaged_test_exit() after acquiring mmap lock:
khugepaged_collapse_pte_mapped_thps() and hugepage_vma_revalidate() do so,
for example. But retract_page_tables() did not: fix that.
The fix is for retract_page_tables() to check khugepaged_test_exit(),
after acquiring mmap lock, before doing anything to the page table.
Getting the mmap lock serializes with __mmput(), which briefly takes and
drops it in __khugepaged_exit(); then the khugepaged_test_exit() check on
mm_users makes sure we don't touch the page table once exit_mmap() might
reach it, since exit_mmap() will be proceeding without mmap lock, not
expecting anyone to be racing with it.
Fixes: f3f0e1d215 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: <stable@vger.kernel.org> [4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021215400.27773@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0c64a0dce5 ]
The Landisk setup code maps the CF IDE area using ioremap_prot(), and
passes the resulting virtual addresses to the pata_platform driver,
disguising them as I/O port addresses. Hence the pata_platform driver
translates them again using ioport_map().
As CONFIG_GENERIC_IOMAP=n, and CONFIG_HAS_IOPORT_MAP=y, the
SuperH-specific mapping code in arch/sh/kernel/ioport.c translates
I/O port addresses to virtual addresses by adding sh_io_port_base, which
defaults to -1, thus breaking the assumption of an identity mapping.
Fix this by setting sh_io_port_base to zero.
Fixes: 37b7a97884 ("sh: machvec IO death.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa5c893181 ]
When using a cross-compilation environment, such as OpenEmbedded,
the CC an CXX variables are set to something more than just a
command: there are arguments (such as --sysroot) that need to be
passed on to the compiler so that the right set of headers and
libraries are used.
For the particular case that our systems detected, CC is set to
the following:
export CC="aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/machine/perf/1.0-r9/recipe-sysroot"
Without quotes, detection is as follows:
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:414: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
Makefile.perf:230: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:69: recipe for target 'all' failed
make: *** [all] Error 2
With CC and CXX quoted, some of those features are now detected.
Fixes: e3232c2f39 ("tools build feature: Use CC and CXX from parent")
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Reviewed-by: Thomas Hebb <tommyhebb@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20200812221518.2869003-1-daniel.diaz@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1beaef29c3 ]
For memcpy, the source pages are memset to zero only when --cycles is
used. This leads to wildly different results with or without --cycles,
since all sources pages are likely to be mapped to the same zero page
without explicit writes.
Before this fix:
$ export cmd="./perf stat -e LLC-loads -- ./perf bench \
mem memcpy -s 1024MB -l 100 -f default"
$ $cmd
2,935,826 LLC-loads
3.821677452 seconds time elapsed
$ $cmd --cycles
217,533,436 LLC-loads
8.616725985 seconds time elapsed
After this fix:
$ $cmd
214,459,686 LLC-loads
8.674301124 seconds time elapsed
$ $cmd --cycles
214,758,651 LLC-loads
8.644480006 seconds time elapsed
Fixes: 47b5757bac ("perf bench mem: Move boilerplate memory allocation to the infrastructure")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel@axis.com
Link: http://lore.kernel.org/lkml/20200810133404.30829-1-vincent.whitchurch@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21dfbcd1f5 ]
In skcipher_accept_parent_nokey() the whole af_alg_ctx structure is
cleared by memset() after allocation, so add such memset() also to
aead_accept_parent_nokey() so that the new "init" field is also
initialized to zero. Without that the initial ctx->init checks might
randomly return true and cause errors.
While there, also remove the redundant zero assignments in both
functions.
Found via libkcapi testsuite.
Cc: Stephan Mueller <smueller@chronox.de>
Fixes: f3c802a1f3 ("crypto: algif_aead - Only wake up when ctx->more is zero")
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d85894225 ]
The event handler loop must be run with interrupts disabled.
Otherwise we will have a warning:
[ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts
[ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170
[ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170
...
[ 1970.946994] Call Trace:
[ 1970.949446] <IRQ>
[ 1970.951471] handle_irq_event_percpu+0x2c/0x80
[ 1970.955921] handle_irq_event+0x23/0x43
[ 1970.959766] handle_simple_irq+0x57/0x70
[ 1970.963695] generic_handle_irq+0x42/0x50
[ 1970.967717] dln2_rx+0xc1/0x210 [dln2]
[ 1970.971479] ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0
[ 1970.976362] __usb_hcd_giveback_urb+0x77/0xe0
[ 1970.980727] usb_giveback_urb_bh+0x8e/0xe0
[ 1970.984837] tasklet_action_common.isra.0+0x4a/0xe0
...
Recently xHCI driver switched to tasklets in the commit 36dc01657b
("usb: host: xhci: Support running urb giveback in tasklet context").
The handle_irq_event_* functions are expected to be called with interrupts
disabled and they rightfully complain here because we run in tasklet context
with interrupts enabled.
Use a event spinlock to protect event handler from being interrupted.
Note, that there are only two users of this GPIO and ADC drivers and both of
them are using generic_handle_irq() which makes above happen.
Fixes: 338a128142 ("mfd: Add support for Diolan DLN-2 devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4487b9354 ]
Move the buffer size check to decode_attr_security_label() before memcpy()
Only call memcpy() if the buffer is large enough
Fixes: aa9c266962 ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Jeffrey Mitchell <jeffrey.mitchell@starlab.io>
[Trond: clean up duplicate test of label->len != 0]
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50caa777a3 ]
Fix the missing clk_disable_unprepare() before return
from emac_clks_phase1_init() in the error handling case.
Fixes: b9b17debc6 ("net: emac: emac gigabit ethernet controller driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4437c1152c ]
These if statements are supposed to be true if we ended the
list_for_each_entry() loops without hitting a break statement but they
don't work.
In the first loop, we increment "i" after the "if (i == unit)" condition
so we don't necessarily know that "i" is not equal to unit at the end of
the loop.
In the second loop we exit when mode is not pointing to a valid
drm_display_mode struct so it doesn't make sense to check "mode->type".
Fixes: a278724aa2 ("drm/vmwgfx: Implement fbdev on kms v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d2c0c565b ]
The "entry" pointer is an offset from the list head and it doesn't
point to a valid vmw_legacy_display_unit struct. Presumably the
intent was to point to the last entry.
Also the "i++" wasn't used so I have removed that as well.
Fixes: d7e1958dbe ("drm/vmwgfx: Support older hardware.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8abe1de43 ]
The error handling calls md_bitmap_free(bitmap) which checks for NULL
but will Oops if we pass an error pointer. Let's set "bitmap" to NULL
on this error path.
Fixes: afd7562860 ("md-cluster/raid10: resize all the bitmaps before start reshape")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb36e29bb0 ]
When watchdog device is being registered, it calls misc_register that
makes watchdog available for systemd to open. This is a data race
scenario, because when device is open it may still have device struct
not initialized - this in turn causes a crash. This patch moves
device initialization before misc_register call and it solves the
problem printed below.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1 at lib/kobject.c:612 kobject_get+0x50/0x54
kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is being called.
Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6
CPU: 3 PID: 1 Comm: systemd Tainted: G O 4.19.113-g2579778-fsm4_k2 #1
Hardware name: Keystone
[<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c)
[<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8)
[<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114)
[<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74)
[<c0221fd8>] (warn_slowpath_fmt) from [<c07fd394>] (kobject_get+0x50/0x54)
[<c07fd394>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24)
[<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0)
[<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c)
[<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8)
[<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc)
[<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148)
[<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec)
[<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4)
[<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xd2ceffa8 to 0xd2cefff0)
ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000
ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78
ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6
---[ end trace 7b16eb105513974f ]---
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1 at lib/refcount.c:153 kobject_get+0x24/0x54
refcount_t: increment on 0; use-after-free.
Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6
CPU: 3 PID: 1 Comm: systemd Tainted: G W O 4.19.113-g2579778-fsm4_k2 #1
Hardware name: Keystone
[<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c)
[<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8)
[<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114)
[<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74)
[<c0221fd8>] (warn_slowpath_fmt) from [<c07fd368>] (kobject_get+0x24/0x54)
[<c07fd368>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24)
[<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0)
[<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c)
[<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8)
[<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc)
[<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148)
[<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec)
[<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4)
[<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xd2ceffa8 to 0xd2cefff0)
ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000
ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78
ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6
---[ end trace 7b16eb1055139750 ]---
Fixes: 72139dfa24 ("watchdog: Fix the race between the release of watchdog_core_data and cdev")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Krzysztof Sobota <krzysztof.sobota@nokia.com>
Link: https://lore.kernel.org/r/20200717103109.14660-1-krzysztof.sobota@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce368536dd ]
The NFS_CONTEXT_ERROR_WRITE flag (as well as the check of said flag) was
removed by commit 6fbda89b25. The absence of an error check allows
writes to be continually queued up for a server that may no longer be
able to handle them. Fix it by adding an error check using the generic
error reporting functions.
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af6de8c60f ]
We cannot wait on a completion object in the lpfc_nvme_targetport structure
in the _destroy_targetport() code path because the NVMe/fc transport will
free that structure immediately after the .targetport_delete() callback.
This results in a use-after-free, and a crash if slub_debug=FZPU is
enabled.
An earlier fix put put the completion on the stack, but commit 2a0fb340fc
("scsi: lpfc: Correct localport timeout duration error") subsequently
changed the code to reference the completion through a pointer in the
object rather than the local stack variable. Fix this by using the stack
variable directly.
Link: https://lore.kernel.org/r/20200729231011.13240-1-emilne@redhat.com
Fixes: 2a0fb340fc ("scsi: lpfc: Correct localport timeout duration error")
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57b8e277c3 ]
When dumping a stack with 'cat /proc/#/stack' the kernel would oops.
For example:
# cat /proc/690/stack
Unable to handle kernel access
at virtual address 0x7fc60f58
Oops#: 0000
CPU #: 0
PC: c00097fc SR: 0000807f SP: d6f09b9c
GPR00: 00000000 GPR01: d6f09b9c GPR02: d6f09bb8 GPR03: d6f09bc4
GPR04: 7fc60f5c GPR05: c00099b4 GPR06: 00000000 GPR07: d6f09ba3
GPR08: ffffff00 GPR09: c0009804 GPR10: d6f08000 GPR11: 00000000
GPR12: ffffe000 GPR13: dbb86000 GPR14: 00000001 GPR15: dbb86250
GPR16: 7fc60f63 GPR17: 00000f5c GPR18: d6f09bc4 GPR19: 00000000
GPR20: c00099b4 GPR21: ffffffc0 GPR22: 00000000 GPR23: 00000000
GPR24: 00000001 GPR25: 000002c6 GPR26: d78b6850 GPR27: 00000001
GPR28: 00000000 GPR29: dbb86000 GPR30: ffffffff GPR31: dbb862fc
RES: 00000000 oGPR11: ffffffff
Process cat (pid: 702, stackpage=d79d6000)
Stack:
Call trace:
[<598977f2>] save_stack_trace_tsk+0x40/0x74
[<95063f0e>] stack_trace_save_tsk+0x44/0x58
[<b557bfdd>] proc_pid_stack+0xd0/0x13c
[<a2df8eda>] proc_single_show+0x6c/0xf0
[<e5a737b7>] seq_read+0x1b4/0x688
[<2d6c7480>] do_iter_read+0x208/0x248
[<2182a2fb>] vfs_readv+0x64/0x90
This was caused by the stack trace code in save_stack_trace_tsk using
the wrong stack pointer. It was using the user stack pointer instead of
the kernel stack pointer. Fix this by using the right stack.
Also for good measure we add try_get_task_stack/put_task_stack to ensure
the task is not lost while we are walking it's stack.
Fixes: eecac38b04 ("openrisc: support framepointers and STACKTRACE_SUPPORT")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f674025d9 ]
commit 7d988097c5 ("acpi/nfit, libnvdimm/security: Add security DSM overwrite support")
adds a sysfs_notify_dirent() to wake up userspace poll thread when the "overwrite"
operation has completed. But the notification is issued before the internal
dimm security state and flags have been updated, so the userspace poll thread
wakes up and fetches the not-yet-updated attr and falls back to sleep, forever.
But if user from another terminal issue "ndctl wait-overwrite nmemX" again,
the command returns instantly.
Link: https://lore.kernel.org/r/1596494499-9852-3-git-send-email-jane.chu@oracle.com
Fixes: 7d988097c5 ("acpi/nfit, libnvdimm/security: Add security DSM overwrite support")
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 094b6d1295 ]
There a wrong orphan node deleting in error handling path in
ubifs_jnl_update() and ubifs_jnl_rename(), which may cause
following error msg:
UBIFS error (ubi0:0 pid 1522): ubifs_delete_orphan [ubifs]:
missing orphan ino 65
Fix this by checking whether the node has been operated for
adding to orphan list before being deleted,
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Fixes: 823838a486 ("ubifs: Add hashes to the tree node cache")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67dd23f9e6 ]
nfs_wb_all() calls filemap_write_and_wait(), which uses
filemap_check_errors() to determine the error to return.
filemap_check_errors() only looks at the mapping->flags and will
therefore only return either -ENOSPC or -EIO. To ensure that the
correct error is returned on close(), nfs{,4}_file_flush() should call
filemap_check_wb_err() which looks at the errseq value in
mapping->wb_err without consuming it.
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with
generic one")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7c9e914f9 ]
Due to the lockless design of the driver, it is theoretically possible
to access a NULL pointer, if a slave interrupt was running while we were
unregistering the slave. To make this rock solid, disable the interrupt
for a short time while we are clearing the interrupt_enable register.
This patch is purely based on code inspection. The OOPS is super-hard to
trigger because clearing SAR (the address) makes interrupts even more
unlikely to happen as well. While here, reinit SCR to SDBS because this
bit should always be set according to documentation. There is no effect,
though, because the interface is disabled.
Fixes: 7b814d852a ("i2c: rcar: avoid race when unregistering slave client")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3232c2f39 ]
commit c8c188679c ("tools build: Use the same CC for feature detection
and actual build") changed these assignments from unconditional (:=) to
conditional (?=) so that they wouldn't clobber values from the
environment. However, conditional assignment does not work properly for
variables that Make implicitly sets, among which are CC and CXX. To
quote tools/scripts/Makefile.include, which handles this properly:
# Makefiles suck: This macro sets a default value of $(2) for the
# variable named by $(1), unless the variable has been set by
# environment or command line. This is necessary for CC and AR
# because make sets default values, so the simpler ?= approach
# won't work as expected.
In other words, the conditional assignments will not run even if the
variables are not overridden in the environment; Make will set CC to
"cc" and CXX to "g++" when it starts[1], meaning the variables are not
empty by the time the conditional assignments are evaluated. This breaks
cross-compilation when CROSS_COMPILE is set but CC isn't, since "cc"
gets used for feature detection instead of the cross compiler (and
likewise for CXX).
To fix the issue, just pass down the values of CC and CXX computed by
the parent Makefile, which gets included by the Makefile that actually
builds whatever we're detecting features for and so is guaranteed to
have good values. This is a better solution anyway, since it means we
aren't trying to replicate the logic of the parent build system and so
don't risk it getting out of sync.
Leave PKG_CONFIG alone, since 1) there's no common logic to compute it
in Makefile.include, and 2) it's not an implicit variable, so
conditional assignment works properly.
[1] https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
Fixes: c8c188679c ("tools build: Use the same CC for feature detection and actual build")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: thomas hebb <tommyhebb@gmail.com>
Link: http://lore.kernel.org/lkml/0a6e69d1736b0fa231a648f50b0cce5d8a6734ef.1595822871.git.tommyhebb@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 314139f9f0 ]
When the SSR interrupt is activated, it will detect every STOP condition
on the bus, not only the ones after we have been addressed. So, enable
this interrupt only after we have been addressed, and disable it
otherwise.
Fixes: de20d1857d ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e766668c6c ]
dm_stop_queue() only uses blk_mq_quiesce_queue() so it doesn't
formally stop the blk-mq queue; therefore there is no point making the
blk_mq_queue_stopped() check -- it will never be stopped.
In addition, even though dm_stop_queue() actually tries to quiesce hw
queues via blk_mq_quiesce_queue(), checking with blk_queue_quiesced()
to avoid unnecessary queue quiesce isn't reliable because: the
QUEUE_FLAG_QUIESCED flag is set before synchronize_rcu() and
dm_stop_queue() may be called when synchronize_rcu() from another
blk_mq_quiesce_queue() is in-progress.
Fixes: 7b17c2f729 ("dm: Fix a race condition related to stopping and starting queues")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd81d821d0 ]
Use a bit-mask of EOF irqs to determine when all required idmac
channel EOFs have been received for a tile conversion, and only do
tile completion processing after all EOFs have been received. Otherwise
it was found that a conversion would stall after the completion of a
tile and the start of the next tile, because the input/read idmac
channel had not completed and entered idle state, thus locking up the
channel when attempting to re-start it for the next tile.
Fixes: 0537db801b ("gpu: ipu-v3: image-convert: reconfigure IC per tile")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35bd8c07db ]
Sometimes debugging a device is easiest using devmem on its register
map, and that can be seen with /proc/iomem. But some device drivers have
many memory regions. Take for example a networking switch. Its memory
map used to look like this in /proc/iomem:
1fc000000-1fc3fffff : pcie@1f0000000
1fc000000-1fc3fffff : 0000:00:00.5
1fc010000-1fc01ffff : sys
1fc030000-1fc03ffff : rew
1fc060000-1fc0603ff : s2
1fc070000-1fc0701ff : devcpu_gcb
1fc080000-1fc0800ff : qs
1fc090000-1fc0900cb : ptp
1fc100000-1fc10ffff : port0
1fc110000-1fc11ffff : port1
1fc120000-1fc12ffff : port2
1fc130000-1fc13ffff : port3
1fc140000-1fc14ffff : port4
1fc150000-1fc15ffff : port5
1fc200000-1fc21ffff : qsys
1fc280000-1fc28ffff : ana
But after the patch in Fixes: was applied, the information is now
presented in a much more opaque way:
1fc000000-1fc3fffff : pcie@1f0000000
1fc000000-1fc3fffff : 0000:00:00.5
1fc010000-1fc01ffff : 0000:00:00.5
1fc030000-1fc03ffff : 0000:00:00.5
1fc060000-1fc0603ff : 0000:00:00.5
1fc070000-1fc0701ff : 0000:00:00.5
1fc080000-1fc0800ff : 0000:00:00.5
1fc090000-1fc0900cb : 0000:00:00.5
1fc100000-1fc10ffff : 0000:00:00.5
1fc110000-1fc11ffff : 0000:00:00.5
1fc120000-1fc12ffff : 0000:00:00.5
1fc130000-1fc13ffff : 0000:00:00.5
1fc140000-1fc14ffff : 0000:00:00.5
1fc150000-1fc15ffff : 0000:00:00.5
1fc200000-1fc21ffff : 0000:00:00.5
1fc280000-1fc28ffff : 0000:00:00.5
That patch made a fair comment that /proc/iomem might be confusing when
it shows resources without an associated device, but we can do better
than just hide the resource name altogether. Namely, we can print the
device name _and_ the resource name. Like this:
1fc000000-1fc3fffff : pcie@1f0000000
1fc000000-1fc3fffff : 0000:00:00.5
1fc010000-1fc01ffff : 0000:00:00.5 sys
1fc030000-1fc03ffff : 0000:00:00.5 rew
1fc060000-1fc0603ff : 0000:00:00.5 s2
1fc070000-1fc0701ff : 0000:00:00.5 devcpu_gcb
1fc080000-1fc0800ff : 0000:00:00.5 qs
1fc090000-1fc0900cb : 0000:00:00.5 ptp
1fc100000-1fc10ffff : 0000:00:00.5 port0
1fc110000-1fc11ffff : 0000:00:00.5 port1
1fc120000-1fc12ffff : 0000:00:00.5 port2
1fc130000-1fc13ffff : 0000:00:00.5 port3
1fc140000-1fc14ffff : 0000:00:00.5 port4
1fc150000-1fc15ffff : 0000:00:00.5 port5
1fc200000-1fc21ffff : 0000:00:00.5 qsys
1fc280000-1fc28ffff : 0000:00:00.5 ana
Fixes: 8d84b18f56 ("devres: always use dev_name() in devm_ioremap_resource()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200601095826.1757621-1-olteanv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 662bb52f50 ]
Some user-space programs rely on crypto requests that have no
control metadata. This broke when a check was added to require
the presence of control metadata with the ctx->init flag.
This patch fixes the regression by setting ctx->init as long as
one sendmsg(2) has been made, with or without a control message.
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: f3c802a1f3 ("crypto: algif_aead - Only wake up when...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce054039ba ]
Clean up receive processing by dropping the character pointer and
keeping the length argument unchanged throughout the function.
Also make it more apparent that sysrq processing can consume a
characters by adding an explicit continue.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3220fb6678 ]
This is a follow up adjustment to commit 6c92bd5cd4 ("selftests/bpf:
Test_progs indicate to shell on non-actions"), that returns shell exit
indication EXIT_FAILURE (value 1) when user selects a non-existing test.
The problem with using EXIT_FAILURE is that a shell script cannot tell
the difference between a non-existing test and the test failing.
This patch uses value 2 as shell exit indication.
(Aside note unrecognized option parameters use value 64).
Fixes: 6c92bd5cd4 ("selftests/bpf: Test_progs indicate to shell on non-actions")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159410593992.1093222.90072558386094370.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f879bab72 ]
Setting the output CSC mode is required for a YUV output, but must not
be set when the input is also YUV. Doing this (as tested with a YUV420P
to YUV420P conversion) results in wrong colors.
Adapt the logic to only set the output CSC mode when the output is YUV and
the input is RGB. Also add a comment to clarify the rationale.
Fixes: f7e7b48e6d ("[media] rockchip/rga: v4l2 m2m support")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ded874ece2 ]
This introduces two macros: RGA_COLOR_FMT_IS_YUV and RGA_COLOR_FMT_IS_RGB
which allow quick checking of the colorspace familily of a RGA color format.
These macros are then used to refactor the logic for CSC mode selection.
The two nested tests for input colorspace are simplified into a single one,
with a logical and, making the whole more readable.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65936bf25f ]
ipoib_mcast_carrier_on_task() insanely open codes a rtnl_lock() such that
the only time flush_workqueue() can be called is if it also clears
IPOIB_FLAG_OPER_UP.
Thus the flush inside ipoib_flush_ah() will deadlock if it gets unlucky
enough, and lockdep doesn't help us to find it early:
CPU0 CPU1 CPU2
__ipoib_ib_dev_flush()
down_read(vlan_rwsem)
ipoib_vlan_add()
rtnl_trylock()
down_write(vlan_rwsem)
ipoib_mcast_carrier_on_task()
while (!rtnl_trylock())
msleep(20);
ipoib_flush_ah()
flush_workqueue(priv->wq)
Clean up the ah_reaper related functions and lifecycle to make sense:
- Start/Stop of the reaper should only be done in open/stop NDOs, not in
any other places
- cancel and flush of the reaper should only happen in the stop NDO.
cancel is only functional when combined with IPOIB_STOP_REAPER.
- Non-stop places were flushing the AH's just need to flush out dead AH's
synchronously and ignore the background task completely. It is fully
locked and harmless to leave running.
Which ultimately fixes the ABBA deadlock by removing the unnecessary
flush_workqueue() from the problematic place under the vlan_rwsem.
Fixes: efc82eeeae ("IB/ipoib: No longer use flush as a parameter")
Link: https://lore.kernel.org/r/20200625174219.290842-1-kamalheib1@gmail.com
Reported-by: Kamal Heib <kheib@redhat.com>
Tested-by: Kamal Heib <kheib@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaa3cbbac3 ]
In function cros_ec_ishtp_probe(), "up_write" is already called
before function "cros_ec_dev_init". But "up_write" will be called
again after the calling of the function "cros_ec_dev_init" failed.
Thus add a call of the function “down_write” in this if branch
for the completion of the exception handling.
Fixes: 26a14267af ("platform/chrome: Add ChromeOS EC ISHTP driver")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Tested-by: Mathew King <mathewk@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 393415203f ]
We need to increase TSO_HEADER_SIZE from 128 to 256.
Since otx2_sq_init() calls qmem_alloc() with TSO_HEADER_SIZE,
we need to change (struct qmem)->entry_sz to avoid truncation to 0.
Fixes: 7a37245ef2 ("octeontx2-af: NPA block admin queue init")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddff6c45b2 ]
Whilst it doesn't matter if the internal 32k clock register settings
are cleaned up on exit, as the part will be turned off losing any
settings, hence the driver hasn't historially bothered. The external
clock should however be cleaned up, as it could cause clocks to be
left on, and will at best generate a warning on unbind.
Add clean up on both the probe error path and unbind for the 32k
clock.
Fixes: cdd8da8cc6 ("mfd: arizona: Add gating of external MCLKn clocks")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3c802a1f3 ]
AEAD does not support partial requests so we must not wake up
while ctx->more is set. In order to distinguish between the
case of no data sent yet and a zero-length request, a new init
flag has been added to ctx.
SKCIPHER has also been modified to ensure that at least a block
of data is available if there is more data to come.
Fixes: 2d97591ef4 ("crypto: af_alg - consolidation of...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ec95f1dedc upstream.
Christoph Hellwig sent in a reversion of "orangefs: remember count
when reading." because:
->read_iter calls can race with each other and one or
more ->flush calls. Remove the the scheme to store the read
count in the file private data as is is completely racy and
can cause use after free or double free conditions
Christoph's reversion caused Orangefs not to work or to compile. I
added a patch that fixed that, but intel's kbuild test robot pointed
out that sending Christoph's patch followed by my patch upstream, it
would break bisection because of the failure to compile. So I have
combined the reversion plus my patch... here's the commit message
that was in my patch:
Logically, optimal Orangefs "pages" are 4 megabytes. Reading
large Orangefs files 4096 bytes at a time is like trying to
kick a dead whale down the beach. Before Christoph's "Revert
orangefs: remember count when reading." I tried to give users
a knob whereby they could, for example, use "count" in
read(2) or bs with dd(1) to get whatever they considered an
appropriate amount of bytes at a time from Orangefs and fill
as many page cache pages as they could at once.
Without the racy code that Christoph reverted Orangefs won't
even compile, much less work. So this replaces the logic that
used the private file data that Christoph reverted with
a static number of bytes to read from Orangefs.
I ran tests like the following to determine what a
reasonable static number of bytes might be:
dd if=/pvfsmnt/asdf of=/dev/null count=128 bs=4194304
dd if=/pvfsmnt/asdf of=/dev/null count=256 bs=2097152
dd if=/pvfsmnt/asdf of=/dev/null count=512 bs=1048576
.
.
.
dd if=/pvfsmnt/asdf of=/dev/null count=4194304 bs=128
Reads seem faster using the static number, so my "knob code"
wasn't just racy, it wasn't even a good idea...
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 135b9e8d1c upstream.
The following mem abort is observed when one of the modem blob firmware
size exceeds the allocated mpss region. Fix this by restricting the copy
size to segment size using request_firmware_into_buf before load.
Err Logs:
Unable to handle kernel paging request at virtual address
Mem abort info:
...
Call trace:
__memcpy+0x110/0x180
rproc_start+0xd0/0x190
rproc_boot+0x404/0x550
state_store+0x54/0xf8
dev_attr_store+0x44/0x60
sysfs_kf_write+0x58/0x80
kernfs_fop_write+0x140/0x230
vfs_write+0xc4/0x208
ksys_write+0x74/0xf8
...
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 051fb70fd4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Cc: stable@vger.kernel.org
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200722201047.12975-3-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e013f455d9 upstream.
The following mem abort is observed when the mba firmware size exceeds
the allocated mba region. MBA firmware size is restricted to a maximum
size of 1M and remaining memory region is used by modem debug policy
firmware when available. Hence verify whether the MBA firmware size lies
within the allocated memory region and is not greater than 1M before
loading.
Err Logs:
Unable to handle kernel paging request at virtual address
Mem abort info:
...
Call trace:
__memcpy+0x110/0x180
rproc_start+0x40/0x218
rproc_boot+0x5b4/0x608
state_store+0x54/0xf8
dev_attr_store+0x44/0x60
sysfs_kf_write+0x58/0x80
kernfs_fop_write+0x140/0x230
vfs_write+0xc4/0x208
ksys_write+0x74/0xf8
__arm64_sys_write+0x24/0x30
...
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 051fb70fd4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Cc: stable@vger.kernel.org
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200722201047.12975-2-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b7be88007 upstream.
Sometimes the stop triggers a watchdog rather than a stop-ack. Update
the running state to false on requesting stop to skip the watchdog
instead.
Error Logs:
$ echo stop > /sys/class/remoteproc/remoteproc0/state
ipa 1e40000.ipa: received modem stopping event
remoteproc-modem: watchdog received: sys_m_smsm_mpss.c:291:APPS force stop
qcom-q6v5-mss 4080000.remoteproc-modem: port failed halt
ipa 1e40000.ipa: received modem offline event
remoteproc0: stopped remote processor 4080000.remoteproc-modem
Reviewed-by: Evan Green <evgreen@chromium.org>
Fixes: 3b415c8fb2 ("remoteproc: q6v5: Extract common resource handling")
Cc: stable@vger.kernel.org
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200602163257.26978-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11990a5bd7 upstream.
The only-root-readable /sys/module/$module/sections/$section files
did not truncate their output to the available buffer size. While most
paths into the kernfs read handlers end up using PAGE_SIZE buffers,
it's possible to get there through other paths (e.g. splice, sendfile).
Actually limit the output to the "count" passed into the read function,
and report it back correctly. *sigh*
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/20200805002015.GE23458@shao2-debian
Fixes: ed66f991bb ("module: Refactor section attr into bin attribute")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02e37571f9 upstream.
Most session messages contain a feature mask, but the MDS will
routinely send a REJECT message with one that is zero-length.
Commit 0fa8263367 ("ceph: fix endianness bug when handling MDS
session feature bits") fixed the decoding of the feature mask,
but failed to account for the MDS sending a zero-length feature
mask. This causes REJECT message decoding to fail.
Skip trying to decode a feature mask if the word count is zero.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/46823
Fixes: 0fa8263367 ("ceph: fix endianness bug when handling MDS session feature bits")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Patrick Donnelly <pdonnell@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b748fc7a87 upstream.
Symlink inodes should have the security context set in their xattrs on
creation. We already set the context on creation, but we don't attach
the pagelist. The effect is that symlink inodes don't get an SELinux
context set on them at creation, so they end up unlabeled instead of
inheriting the proper context. Make it do so.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f39d57584 upstream.
The flag indicating a watchdog timeout having occurred normally persists
till Power-On Reset of the Fintek Super I/O chip. The user can clear it
by writing a `1' to the bit.
The driver doesn't offer a restart method, so regular system reboot
might not reset the Super I/O and if the watchdog isn't enabled, we
won't touch the register containing the bit on the next boot.
In this case all subsequent regular reboots will be wrongly flagged
by the driver as being caused by the watchdog.
Fix this by having the flag cleared after read. This is also done by
other drivers like those for the i6300esb and mpc8xxx_wdt.
Fixes: b97cb21a46 ("watchdog: f71808e_wdt: Fix WDTMOUT_STS register read")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200611191750.28096-5-a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 802141462d upstream.
The flags that should be or-ed into the watchdog_info.options by drivers
all start with WDIOF_, e.g. WDIOF_SETTIMEOUT, which indicates that the
driver's watchdog_ops has a usable set_timeout.
WDIOC_SETTIMEOUT was used instead, which expands to 0xc0045706, which
equals:
WDIOF_FANFAULT | WDIOF_EXTERN1 | WDIOF_PRETIMEOUT | WDIOF_ALARMONLY |
WDIOF_MAGICCLOSE | 0xc0045000
These were so far indicated to userspace on WDIOC_GETSUPPORT.
As the driver has not yet been migrated to the new watchdog kernel API,
the constant can just be dropped without substitute.
Fixes: 96cb4eb019 ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200611191750.28096-4-a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ef282e051 upstream.
If a process has the trace_pipe open on a trace_array, the current tracer
for that trace array should not be changed. This was original enforced by a
global lock, but when instances were introduced, it was moved to the
current_trace. But this structure is shared by all instances, and a
trace_pipe is for a single instance. There's no reason that a process that
has trace_pipe open on one instance should prevent another instance from
changing its current tracer. Move the reference counter to the trace_array
instead.
This is marked as "Fixes" but is more of a clean up than a true fix.
Backport if you want, but its not critical.
Fixes: cf6ab6d914 ("tracing: Add ref count to tracer for when they are being read by pipe")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[Resolved conflict in __remove_instance()]
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit afcab63665 upstream.
On exit, if a process is preempted after the trace_sched_process_exit()
tracepoint but before the process is done exiting, then when it gets
scheduled in, the function tracers will not filter it properly against the
function tracing pid filters.
That is because the function tracing pid filters hooks to the
sched_process_exit() tracepoint to remove the exiting task's pid from the
filter list. Because the filtering happens at the sched_switch tracepoint,
when the exiting task schedules back in to finish up the exit, it will no
longer be in the function pid filtering tables.
This was noticeable in the notrace self tests on a preemptable kernel, as
the tests would fail as it exits and preempted after being taken off the
notrace filter table and on scheduling back in it would not be in the
notrace list, and then the ending of the exit function would trace. The test
detected this and would fail.
Cc: stable@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 1e10486ffe ("ftrace: Add 'function-fork' trace option")
Fixes: c37775d578 ("tracing: Add infrastructure to allow set_event_pid to follow children"
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cb2f1372b upstream.
We found a case of kernel panic on our server. The stack trace is as
follows(omit some irrelevant information):
BUG: kernel NULL pointer dereference, address: 0000000000000080
RIP: 0010:kprobe_ftrace_handler+0x5e/0xe0
RSP: 0018:ffffb512c6550998 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8e9d16eea018 RCX: 0000000000000000
RDX: ffffffffbe1179c0 RSI: ffffffffc0535564 RDI: ffffffffc0534ec0
RBP: ffffffffc0534ec1 R08: ffff8e9d1bbb0f00 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8e9d1f797060 R14: 000000000000bacc R15: ffff8e9ce13eca00
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000080 CR3: 00000008453d0005 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
ftrace_ops_assist_func+0x56/0xe0
ftrace_call+0x5/0x34
tcpa_statistic_send+0x5/0x130 [ttcp_engine]
The tcpa_statistic_send is the function being kprobed. After analysis,
the root cause is that the fourth parameter regs of kprobe_ftrace_handler
is NULL. Why regs is NULL? We use the crash tool to analyze the kdump.
crash> dis tcpa_statistic_send -r
<tcpa_statistic_send>: callq 0xffffffffbd8018c0 <ftrace_caller>
The tcpa_statistic_send calls ftrace_caller instead of ftrace_regs_caller.
So it is reasonable that the fourth parameter regs of kprobe_ftrace_handler
is NULL. In theory, we should call the ftrace_regs_caller instead of the
ftrace_caller. After in-depth analysis, we found a reproducible path.
Writing a simple kernel module which starts a periodic timer. The
timer's handler is named 'kprobe_test_timer_handler'. The module
name is kprobe_test.ko.
1) insmod kprobe_test.ko
2) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}'
3) echo 0 > /proc/sys/kernel/ftrace_enabled
4) rmmod kprobe_test
5) stop step 2) kprobe
6) insmod kprobe_test.ko
7) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}'
We mark the kprobe as GONE but not disarm the kprobe in the step 4).
The step 5) also do not disarm the kprobe when unregister kprobe. So
we do not remove the ip from the filter. In this case, when the module
loads again in the step 6), we will replace the code to ftrace_caller
via the ftrace_module_enable(). When we register kprobe again, we will
not replace ftrace_caller to ftrace_regs_caller because the ftrace is
disabled in the step 3). So the step 7) will trigger kernel panic. Fix
this problem by disarming the kprobe when the module is going away.
Link: https://lkml.kernel.org/r/20200728064536.24405-1-songmuchun@bytedance.com
Cc: stable@vger.kernel.org
Fixes: ae6aa16fdc ("kprobes: introduce ftrace based optimization")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a224ffb3f upstream.
When module loaded and enabled, we will use __ftrace_replace_code
for module if any ftrace_ops referenced it found. But we will get
wrong ftrace_addr for module rec in ftrace_get_addr_new, because
rec->flags has not been setup correctly. It can cause the callback
function of a ftrace_ops has FTRACE_OPS_FL_SAVE_REGS to be called
with pt_regs set to NULL.
So setup correct FTRACE_FL_REGS flags for rec when we call
referenced_filters to find ftrace_ops references it.
Link: https://lkml.kernel.org/r/20200728180554.65203-1-zhouchengming@bytedance.com
Cc: stable@vger.kernel.org
Fixes: 8c4f3c3fa9 ("ftrace: Check module functions being traced on reload")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6f23d14ec upstream.
When workload runs in cgroups that aren't directly below root cgroup and
their parent specifies reclaim protection, it may end up ineffective.
The reason is that propagate_protected_usage() is not called in all
hierarchy up. All the protected usage is incorrectly accumulated in the
workload's parent. This means that siblings_low_usage is overestimated
and effective protection underestimated. Even though it is transitional
phenomenon (uncharge path does correct propagation and fixes the wrong
children_low_usage), it can undermine the intended protection
unexpectedly.
We have noticed this problem while seeing a swap out in a descendant of a
protected memcg (intermediate node) while the parent was conveniently
under its protection limit and the memory pressure was external to that
hierarchy. Michal has pinpointed this down to the wrong
siblings_low_usage which led to the unwanted reclaim.
The fix is simply updating children_low_usage in respective ancestors also
in the charging path.
Fixes: 230671533d ("mm: memory.low hierarchical behavior")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org> [4.18+]
Link: http://lkml.kernel.org/r/20200803153231.15477-1-mhocko@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 119a5fc161 upstream.
When retract_page_tables() removes a page table to make way for a huge
pmd, it holds huge page lock, i_mmap_lock_write, mmap_write_trylock and
pmd lock; but when collapse_pte_mapped_thp() does the same (to handle the
case when the original mmap_write_trylock had failed), only
mmap_write_trylock and pmd lock are held.
That's not enough. One machine has twice crashed under load, with "BUG:
spinlock bad magic" and GPF on 6b6b6b6b6b6b6b6b. Examining the second
crash, page_vma_mapped_walk_done()'s spin_unlock of pvmw->ptl (serving
page_referenced() on a file THP, that had found a page table at *pmd)
discovers that the page table page and its lock have already been freed by
the time it comes to unlock.
Follow the example of retract_page_tables(), but we only need one of huge
page lock or i_mmap_lock_write to secure against this: because it's the
narrower lock, and because it simplifies collapse_pte_mapped_thp() to know
the hpage earlier, choose to rely on huge page lock here.
Fixes: 27e1f82731 ("khugepaged: enable collapse pmd for pte-mapped THP")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: <stable@vger.kernel.org> [5.4+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021213070.27773@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 723a80dafe upstream.
pmdp_collapse_flush() should be given the start address at which the huge
page is mapped, haddr: it was given addr, which at that point has been
used as a local variable, incremented to the end address of the extent.
Found by source inspection while chasing a hugepage locking bug, which I
then could not explain by this. At first I thought this was very bad;
then saw that all of the page translations that were not flushed would
actually still point to the right pages afterwards, so harmless; then
realized that I know nothing of how different architectures and models
cache intermediate paging structures, so maybe it matters after all -
particularly since the page table concerned is immediately freed.
Much easier to fix than to think about.
Fixes: 27e1f82731 ("khugepaged: enable collapse pmd for pte-mapped THP")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: <stable@vger.kernel.org> [5.4+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021204390.27773@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 654888327e upstream.
Commit 3451a495ef ("driver core: Establish order of operations for
device_add and device_del via bitflag") sought to prevent asynchronous
driver binding to a device which is being removed. It added a
per-device "dead" flag which is checked in the following code paths:
* asynchronous binding in __driver_attach_async_helper()
* synchronous binding in device_driver_attach()
* asynchronous binding in __device_attach_async_helper()
It did *not* check the flag upon:
* synchronous binding in __device_attach()
However __device_attach() may also be called asynchronously from:
deferred_probe_work_func()
bus_probe_device()
device_initial_probe()
__device_attach()
So if the commit's intention was to check the "dead" flag in all
asynchronous code paths, then a check is also necessary in
__device_attach(). Add the missing check.
Fixes: 3451a495ef ("driver core: Establish order of operations for device_add and device_del via bitflag")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v5.1+
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/de88a23a6fe0ef70f7cfd13c8aea9ab51b4edab6.1594214103.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a14812679 upstream.
offset_to_stripe() returns the stripe number (in type unsigned int) from
an offset (in type uint64_t) by the following calculation,
do_div(offset, d->stripe_size);
For large capacity backing device (e.g. 18TB) with small stripe size
(e.g. 4KB), the result is 4831838208 and exceeds UINT_MAX. The actual
returned value which caller receives is 536870912, due to the overflow.
Indeed in bcache_device_init(), bcache_device->nr_stripes is limited in
range [1, INT_MAX]. Therefore all valid stripe numbers in bcache are
in range [0, bcache_dev->nr_stripes - 1].
This patch adds a upper limition check in offset_to_stripe(): the max
valid stripe number should be less than bcache_device->nr_stripes. If
the calculated stripe number from do_div() is equal to or larger than
bcache_device->nr_stripe, -EINVAL will be returned. (Normally nr_stripes
is less than INT_MAX, exceeding upper limitation doesn't mean overflow,
therefore -EOVERFLOW is not used as error code.)
This patch also changes nr_stripes' type of struct bcache_device from
'unsigned int' to 'int', and return value type of offset_to_stripe()
from 'unsigned int' to 'int', to match their exact data ranges.
All locations where bcache_device->nr_stripes and offset_to_stripe() are
referenced also get updated for the above type change.
Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fe4886785 upstream.
There are some meta data of bcache are allocated by multiple pages,
and they are used as bio bv_page for I/Os to the cache device. for
example cache_set->uuids, cache->disk_buckets, journal_write->data,
bset_tree->data.
For such meta data memory, all the allocated pages should be treated
as a single memory block. Then the memory management and underlying I/O
code can treat them more clearly.
This patch adds __GFP_COMP flag to all the location allocating >0 order
pages for the above mentioned meta data. Then their pages are treated
as compound pages now.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1c6ae3d9f upstream.
In degraded raid5, we need to read parity to do reconstruct-write when
data disks fail. However, we can not read parity from
handle_stripe_dirtying() in force reconstruct-write mode.
Reproducible Steps:
1. Create degraded raid5
mdadm -C /dev/md2 --assume-clean -l5 -n3 /dev/sda2 /dev/sdb2 missing
2. Set rmw_level to 0
echo 0 > /sys/block/md2/md/rmw_level
3. IO to raid5
Now some io may be stuck in raid5. We can use handle_stripe_fill() to read
the parity in this situation.
Cc: <stable@vger.kernel.org> # v4.4+
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: BingJing Chang <bingjingc@synology.com>
Reviewed-by: Danny Shih <dannyshih@synology.com>
Signed-off-by: ChangSyun Peng <allenpeng@synology.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9539752d2 upstream.
Add missed sock updates to compat path via a new helper, which will be
used more in coming patches. (The net/core/scm.c code is left as-is here
to assist with -stable backports for the compat path.)
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 48a87cc26c ("net: netprio: fd passed in SCM_RIGHTS datagram not set correctly")
Fixes: d84295067f ("net: net_cls: fd passed in SCM_RIGHTS datagram not set correctly")
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 592d751c1e upstream.
If we don't have a hardware multicast filter available then instead of
silently failing to listen for the requested ethernet broadcast
addresses fall back to receiving all multicast packets, in a similar
fashion to other drivers with no multicast filter.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df43dd526e upstream.
The IPQ806x does not appear to have a functional multicast ethernet
address filter. This was observed as a failure to correctly receive IPv6
packets on a LAN to the all stations address. Checking the vendor driver
shows that it does not attempt to enable the multicast filter and
instead falls back to receiving all multicast packets, internally
setting ALLMULTI.
Use the new fallback support in the dwmac1000 driver to correctly
achieve the same with the mainline IPQ806x driver. Confirmed to fix IPv6
functionality on an RB3011 router.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c95348ba3 upstream.
Ingenic SoCs don't natively support registering an interrupt for both
rising and falling edges. This has to be emulated in software.
Until now, this was emulated by switching back and forth between
IRQ_TYPE_EDGE_RISING and IRQ_TYPE_EDGE_FALLING according to the level of
the GPIO. While this worked most of the time, when used with GPIOs that
need debouncing, some events would be lost. For instance, between the
time a falling-edge interrupt happens and the interrupt handler
configures the hardware for rising-edge, the level of the pin may have
already risen, and the rising-edge event is lost.
To address that issue, instead of switching back and forth between
IRQ_TYPE_EDGE_RISING and IRQ_TYPE_EDGE_FALLING, we now switch back and
forth between IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_LEVEL_HIGH. Since we
always switch in the interrupt handler, they actually permit to detect
level changes. In the example above, if the pin level rises before
switching the IRQ type from IRQ_TYPE_LEVEL_LOW to IRQ_TYPE_LEVEL_HIGH,
a new interrupt will raise as soon as the handler exits, and the
rising-edge event will be properly detected.
Fixes: e72394e2ea ("pinctrl: ingenic: Merge GPIO functionality")
Reported-by: João Henrique <johnnyonflame@hotmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: João Henrique <johnnyonflame@hotmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200622214548.265417-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c83b277ad upstream.
Recently random.h started including percpu.h (see commit
f227e3ec3b ("random32: update the net random state on interrupt and
activity")), which broke corenet64_smp_defconfig:
In file included from /linux/arch/powerpc/include/asm/paca.h:18,
from /linux/arch/powerpc/include/asm/percpu.h:13,
from /linux/include/linux/random.h:14,
from /linux/lib/uuid.c:14:
/linux/arch/powerpc/include/asm/mmu.h:139:22: error: unknown type name 'next_tlbcam_idx'
139 | DECLARE_PER_CPU(int, next_tlbcam_idx);
This is due to a circular header dependency:
asm/mmu.h includes asm/percpu.h, which includes asm/paca.h, which
includes asm/mmu.h
Which means DECLARE_PER_CPU() isn't defined when mmu.h needs it.
We can fix it by moving the include of paca.h below the include of
asm-generic/percpu.h.
This moves the include of paca.h out of the #ifdef __powerpc64__, but
that is OK because paca.h is almost entirely inside #ifdef
CONFIG_PPC64 anyway.
It also moves the include of paca.h out of the #ifdef CONFIG_SMP,
which could possibly break something, but seems to have no ill
effects.
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Cc: stable@vger.kernel.org # v5.8
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804130558.292328-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63dee5df43 upstream.
We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.
The code was originally added in 2004 "ported from 2.4". The rough
logic is that the stack is allowed to grow to 1MB with no extra
checking. Over 1MB the access must be within 2048 bytes of the stack
pointer, or be from a user instruction that updates the stack pointer.
The 2048 byte allowance below the stack pointer is there to cover the
288 byte "red zone" as well as the "about 1.5kB" needed by the signal
delivery code.
Unfortunately since then the signal frame has expanded, and is now
4224 bytes on 64-bit kernels with transactional memory enabled. This
means if a process has consumed more than 1MB of stack, and its stack
pointer lies less than 4224 bytes from the next page boundary, signal
delivery will fault when trying to expand the stack and the process
will see a SEGV.
The total size of the signal frame is the size of struct rt_sigframe
(which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on
64-bit).
The 2048 byte allowance was correct until 2008 as the signal frame
was:
struct rt_sigframe {
struct ucontext uc; /* 0 1440 */
/* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1440 16 */
unsigned int tramp[6]; /* 1456 24 */
struct siginfo * pinfo; /* 1480 8 */
void * puc; /* 1488 8 */
struct siginfo info; /* 1496 128 */
/* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1624 288 */
/* size: 1920, cachelines: 15, members: 7 */
/* padding: 8 */
};
1920 + 128 = 2048
Then in commit ce48b21007 ("powerpc: Add VSX context save/restore,
ptrace and signal support") (Jul 2008) the signal frame expanded to
2304 bytes:
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */ <--
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
long unsigned int _unused[2]; /* 1696 16 */
unsigned int tramp[6]; /* 1712 24 */
struct siginfo * pinfo; /* 1736 8 */
void * puc; /* 1744 8 */
struct siginfo info; /* 1752 128 */
/* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */
char abigap[288]; /* 1880 288 */
/* size: 2176, cachelines: 17, members: 7 */
/* padding: 8 */
};
2176 + 128 = 2304
At this point we should have been exposed to the bug, though as far as
I know it was never reported. I no longer have a system old enough to
easily test on.
Then in 2010 commit 320b2b8de1 ("mm: keep a guard page below a
grow-down stack segment") caused our stack expansion code to never
trigger, as there was always a VMA found for a write up to PAGE_SIZE
below r1.
That meant the bug was hidden as we continued to expand the signal
frame in commit 2b0a576d15 ("powerpc: Add new transactional memory
state to the signal context") (Feb 2013):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */ <--
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[288]; /* 3576 288 */
/* size: 3872, cachelines: 31, members: 8 */
/* padding: 8 */
/* last cacheline: 32 bytes */
};
3872 + 128 = 4000
And commit 573ebfa660 ("powerpc: Increase stack redzone for 64-bit
userspace to 512 bytes") (Feb 2014):
struct rt_sigframe {
struct ucontext uc; /* 0 1696 */
/* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
struct ucontext uc_transact; /* 1696 1696 */
/* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
long unsigned int _unused[2]; /* 3392 16 */
unsigned int tramp[6]; /* 3408 24 */
struct siginfo * pinfo; /* 3432 8 */
void * puc; /* 3440 8 */
struct siginfo info; /* 3448 128 */
/* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
char abigap[512]; /* 3576 512 */ <--
/* size: 4096, cachelines: 32, members: 8 */
/* padding: 8 */
};
4096 + 128 = 4224
Then finally in 2017, commit 1be7107fbe ("mm: larger stack guard
gap, between vmas") exposed us to the existing bug, because it changed
the stack VMA to be the correct/real size, meaning our stack expansion
code is now triggered.
Fix it by increasing the allowance to 4224 bytes.
Hard-coding 4224 is obviously unsafe against future expansions of the
signal frame in the same way as the existing code. We can't easily use
sizeof() because the signal frame structure is not in a header. We
will either fix that, or rip out all the custom stack expansion
checking logic entirely.
Fixes: ce48b21007 ("powerpc: Add VSX context save/restore, ptrace and signal support")
Cc: stable@vger.kernel.org # v2.6.27+
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d65d3769d upstream.
Fix the following build error in configurations with
CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS=y:
arch/xtensa/kernel/perf_event.c:420:29: error: passing argument 3 of
‘cpuhp_setup_state’ from incompatible pointer type
Cc: stable@vger.kernel.org
Fixes: 25a77b55e7 ("xtensa/perf: Convert the hotplug notifier to state machine callbacks")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0fc1436f1 upstream.
The result of the s32ex opcode is recorded in the ATOMCTL special
register and must be retrieved with the getex opcode. Context switch
between s32ex and getex may trash the ATOMCTL register and result in
duplicate update or missing update of the atomic variable.
Add atomctl8 field to the struct thread_info and use getex to swap
ATOMCTL bit 8 as a part of context switch.
Clear exclusive access monitor on kernel entry.
Cc: stable@vger.kernel.org
Fixes: f7c34874f0 ("xtensa: add exclusive atomics support")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65afb0932a upstream.
There are 2 exit paths where the lock isn't held, but try to unlock the
mutex when exiting. In these places we should just return from the
function.
A neater approach would be to cleanup the ad5592r_read_raw(), but that
would make this patch more difficult to backport to stable versions.
Fixes 56ca9db862: ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Reported-by: Charles Stanhope <charles.stanhope@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit faa008899a upstream.
There's some inconsistency around SB_I_VERSION handling with mount and
remount. Since we don't really want it to be off ever just work around
this by making sure we don't get the flag cleared on remount.
There's a tiny cpu cost of setting the bit, otherwise all changes to
i_version also change some of the times (ctime/mtime) so the inode needs
to be synced. We wouldn't save anything by disabling it.
Reported-by: Eric Sandeen <sandeen@redhat.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add perf impact analysis ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f26433e9b upstream.
While logging an inode, at copy_items(), if we fail to lookup the checksums
for an extent we release the destination path, free the ins_data array and
then return immediately. However a previous iteration of the for loop may
have added checksums to the ordered_sums list, in which case we leak the
memory used by them.
So fix this by making sure we iterate the ordered_sums list and free all
its checksums before returning.
Fixes: 3650860b90 ("Btrfs: remove almost all of the BUG()'s from tree-log.c")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e6e238c30 upstream.
[BUG]
There is a bug report of NULL pointer dereference caused in
compress_file_extent():
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Workqueue: btrfs-delalloc btrfs_delalloc_helper [btrfs]
NIP [c008000006dd4d34] compress_file_range.constprop.41+0x75c/0x8a0 [btrfs]
LR [c008000006dd4d1c] compress_file_range.constprop.41+0x744/0x8a0 [btrfs]
Call Trace:
[c000000c69093b00] [c008000006dd4d1c] compress_file_range.constprop.41+0x744/0x8a0 [btrfs] (unreliable)
[c000000c69093bd0] [c008000006dd4ebc] async_cow_start+0x44/0xa0 [btrfs]
[c000000c69093c10] [c008000006e14824] normal_work_helper+0xdc/0x598 [btrfs]
[c000000c69093c80] [c0000000001608c0] process_one_work+0x2c0/0x5b0
[c000000c69093d10] [c000000000160c38] worker_thread+0x88/0x660
[c000000c69093db0] [c00000000016b55c] kthread+0x1ac/0x1c0
[c000000c69093e20] [c00000000000b660] ret_from_kernel_thread+0x5c/0x7c
---[ end trace f16954aa20d822f6 ]---
[CAUSE]
For the following execution route of compress_file_range(), it's
possible to hit NULL pointer dereference:
compress_file_extent()
|- pages = NULL;
|- start = async_chunk->start = 0;
|- end = async_chunk = 4095;
|- nr_pages = 1;
|- inode_need_compress() == false; <<< Possible, see later explanation
| Now, we have nr_pages = 1, pages = NULL
|- cont:
|- ret = cow_file_range_inline();
|- if (ret <= 0) {
|- for (i = 0; i < nr_pages; i++) {
|- WARN_ON(pages[i]->mapping); <<< Crash
To enter above call execution branch, we need the following race:
Thread 1 (chattr) | Thread 2 (writeback)
--------------------------+------------------------------
| btrfs_run_delalloc_range
| |- inode_need_compress = true
| |- cow_file_range_async()
btrfs_ioctl_set_flag() |
|- binode_flags |= |
BTRFS_INODE_NOCOMPRESS |
| compress_file_range()
| |- inode_need_compress = false
| |- nr_page = 1 while pages = NULL
| | Then hit the crash
[FIX]
This patch will fix it by checking @pages before doing accessing it.
This patch is only designed as a hot fix and easy to backport.
More elegant fix may make btrfs only check inode_need_compress() once to
avoid such race, but that would be another story.
Reported-by: Luciano Chavez <chavez@us.ibm.com>
Fixes: 4d3a800ebb ("btrfs: merge nr_pages input and output parameter in compress_pages")
CC: stable@vger.kernel.org # 4.14.x: cecc8d9038: btrfs: Move free_pages_out label in inline extent handling branch in compress_file_range
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf53d4687b upstream.
In try_to_merge_free_space we attempt to find entries to the left and
right of the entry we are adding to see if they can be merged. We
search for an entry past our current info (saved into right_info), and
then if right_info exists and it has a rb_prev() we save the rb_prev()
into left_info.
However there's a slight problem in the case that we have a right_info,
but no entry previous to that entry. At that point we will search for
an entry just before the info we're attempting to insert. This will
simply find right_info again, and assign it to left_info, making them
both the same pointer.
Now if right_info _can_ be merged with the range we're inserting, we'll
add it to the info and free right_info. However further down we'll
access left_info, which was right_info, and thus get a use-after-free.
Fix this by only searching for the left entry if we don't find a right
entry at all.
The CVE referenced had a specially crafted file system that could
trigger this use-after-free. However with the tree checker improvements
we no longer trigger the conditions for the UAF. But the original
conditions still apply, hence this fix.
Reference: CVE-2019-19448
Fixes: 9630308170 ("Btrfs: use hybrid extents+bitmap rb tree for free space")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27942c9971 upstream.
Reported by Forza on IRC that remounting with compression options does
not reflect the change in level, or at least it does not appear to do so
according to the messages:
mount -o compress=zstd:1 /dev/sda /mnt
mount -o remount,compress=zstd:15 /mnt
does not print the change to the level to syslog:
[ 41.366060] BTRFS info (device vda): use zstd compression, level 1
[ 41.368254] BTRFS info (device vda): disk space caching is enabled
[ 41.390429] BTRFS info (device vda): disk space caching is enabled
What really happens is that the message is lost but the level is actualy
changed.
There's another weird output, if compression is reset to 'no':
[ 45.413776] BTRFS info (device vda): use no compression, level 4
To fix that, save the previous compression level and print the message
in that case too and use separate message for 'no' compression.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d6448e631 upstream.
When releasing an extent map, done through the page release callback, we
can race with an ongoing fast fsync and cause the fsync to miss a new
extent and not log it. The steps for this to happen are the following:
1) A page is dirtied for some inode I;
2) Writeback for that page is triggered by a path other than fsync, for
example by the system due to memory pressure;
3) When the ordered extent for the extent (a single 4K page) finishes,
we unpin the corresponding extent map and set its generation to N,
the current transaction's generation;
4) The btrfs_releasepage() callback is invoked by the system due to
memory pressure for that no longer dirty page of inode I;
5) At the same time, some task calls fsync on inode I, joins transaction
N, and at btrfs_log_inode() it sees that the inode does not have the
full sync flag set, so we proceed with a fast fsync. But before we get
into btrfs_log_changed_extents() and lock the inode's extent map tree:
6) Through btrfs_releasepage() we end up at try_release_extent_mapping()
and we remove the extent map for the new 4Kb extent, because it is
neither pinned anymore nor locked. By calling remove_extent_mapping(),
we remove the extent map from the list of modified extents, since the
extent map does not have the logging flag set. We unlock the inode's
extent map tree;
7) The task doing the fast fsync now enters btrfs_log_changed_extents(),
locks the inode's extent map tree and iterates its list of modified
extents, which no longer has the 4Kb extent in it, so it does not log
the extent;
8) The fsync finishes;
9) Before transaction N is committed, a power failure happens. After
replaying the log, the 4K extent of inode I will be missing, since
it was not logged due to the race with try_release_extent_mapping().
So fix this by teaching try_release_extent_mapping() to not remove an
extent map if it's still in the list of modified extents.
Fixes: ff44c6e36d ("Btrfs: do not hold the write_lock on the extent tree while logging")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f95ebdbed4 upstream.
If we got some sort of corruption via a read and call
btrfs_handle_fs_error() we'll set BTRFS_FS_STATE_ERROR on the fs and
complain. If a subsequent trans handle trips over this it'll get EROFS
and then abort. However at that point we're not aborting for the
original reason, we're aborting because we've been flipped read only.
We do not need to WARN_ON() here.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3e3d9cc35 upstream.
[BUG]
There is a bug report about bad signal timing could lead to read-only
fs during balance:
BTRFS info (device xvdb): balance: start -d -m -s
BTRFS info (device xvdb): relocating block group 73001861120 flags metadata
BTRFS info (device xvdb): found 12236 extents, stage: move data extents
BTRFS info (device xvdb): relocating block group 71928119296 flags data
BTRFS info (device xvdb): found 3 extents, stage: move data extents
BTRFS info (device xvdb): found 3 extents, stage: update data pointers
BTRFS info (device xvdb): relocating block group 60922265600 flags metadata
BTRFS: error (device xvdb) in btrfs_drop_snapshot:5505: errno=-4 unknown
BTRFS info (device xvdb): forced readonly
BTRFS info (device xvdb): balance: ended with status: -4
[CAUSE]
The direct cause is the -EINTR from the following call chain when a
fatal signal is pending:
relocate_block_group()
|- clean_dirty_subvols()
|- btrfs_drop_snapshot()
|- btrfs_start_transaction()
|- btrfs_delayed_refs_rsv_refill()
|- btrfs_reserve_metadata_bytes()
|- __reserve_metadata_bytes()
|- wait_reserve_ticket()
|- prepare_to_wait_event();
|- ticket->error = -EINTR;
Normally this behavior is fine for most btrfs_start_transaction()
callers, as they need to catch any other error, same for the signal, and
exit ASAP.
However for balance, especially for the clean_dirty_subvols() case, we're
already doing cleanup works, getting -EINTR from btrfs_drop_snapshot()
could cause a lot of unexpected problems.
From the mentioned forced read-only report, to later balance error due
to half dropped reloc trees.
[FIX]
Fix this problem by using btrfs_join_transaction() if
btrfs_drop_snapshot() is called from relocation context.
Since btrfs_join_transaction() won't get interrupted by signal, we can
continue the cleanup.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>3
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f37c563bab upstream.
User Forza reported on IRC that some invalid combinations of file
attributes are accepted by chattr.
The NODATACOW and compression file flags/attributes are mutually
exclusive, but they could be set by 'chattr +c +C' on an empty file. The
nodatacow will be in effect because it's checked first in
btrfs_run_delalloc_range.
Extend the flag validation to catch the following cases:
- input flags are conflicting
- old and new flags are conflicting
- initialize the local variable with inode flags after inode ls locked
Inode attributes take precedence over mount options and are an
independent setting.
Nocompress would be a no-op with nodatacow, but we don't want to mix
any compression-related options with nodatacow.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44d354abf3 upstream.
Since most metadata reservation calls can return -EINTR when get
interrupted by fatal signal, we need to review the all the metadata
reservation call sites.
In relocation code, the metadata reservation happens in the following
sites:
- btrfs_block_rsv_refill() in merge_reloc_root()
merge_reloc_root() is a pretty critical section, we don't want to be
interrupted by signal, so change the flush status to
BTRFS_RESERVE_FLUSH_LIMIT, so it won't get interrupted by signal.
Since such change can be ENPSPC-prone, also shrink the amount of
metadata to reserve least amount avoid deadly ENOSPC there.
- btrfs_block_rsv_refill() in reserve_metadata_space()
It calls with BTRFS_RESERVE_FLUSH_LIMIT, which won't get interrupted
by signal.
- btrfs_block_rsv_refill() in prepare_to_relocate()
- btrfs_block_rsv_add() in prepare_to_relocate()
- btrfs_block_rsv_refill() in relocate_block_group()
- btrfs_delalloc_reserve_metadata() in relocate_file_extent_cluster()
- btrfs_start_transaction() in relocate_block_group()
- btrfs_start_transaction() in create_reloc_inode()
Can be interrupted by fatal signal and we can handle it easily.
For these call sites, just catch the -EINTR value in btrfs_balance()
and count them as canceled.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01d01caf19 upstream.
We are currently getting this lockdep splat in btrfs/161:
======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc5+ #20 Tainted: G E
------------------------------------------------------
mount/678048 is trying to acquire lock:
ffff9b769f15b6e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: clone_fs_devices+0x4d/0x170 [btrfs]
but task is already holding lock:
ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__mutex_lock+0x8b/0x8f0
btrfs_init_new_device+0x2d2/0x1240 [btrfs]
btrfs_ioctl+0x1de/0x2d20 [btrfs]
ksys_ioctl+0x87/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__lock_acquire+0x1240/0x2460
lock_acquire+0xab/0x360
__mutex_lock+0x8b/0x8f0
clone_fs_devices+0x4d/0x170 [btrfs]
btrfs_read_chunk_tree+0x330/0x800 [btrfs]
open_ctree+0xb7c/0x18ce [btrfs]
btrfs_mount_root.cold+0x13/0xfa [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x7de/0xb30
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->chunk_mutex);
lock(&fs_devs->device_list_mutex);
lock(&fs_info->chunk_mutex);
lock(&fs_devs->device_list_mutex);
*** DEADLOCK ***
3 locks held by mount/678048:
#0: ffff9b75ff5fb0e0 (&type->s_umount_key#63/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380
#1: ffffffffc0c2fbc8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x54/0x800 [btrfs]
#2: ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]
stack backtrace:
CPU: 2 PID: 678048 Comm: mount Tainted: G E 5.8.0-rc5+ #20
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
Call Trace:
dump_stack+0x96/0xd0
check_noncircular+0x162/0x180
__lock_acquire+0x1240/0x2460
? asm_sysvec_apic_timer_interrupt+0x12/0x20
lock_acquire+0xab/0x360
? clone_fs_devices+0x4d/0x170 [btrfs]
__mutex_lock+0x8b/0x8f0
? clone_fs_devices+0x4d/0x170 [btrfs]
? rcu_read_lock_sched_held+0x52/0x60
? cpumask_next+0x16/0x20
? module_assert_mutex_or_preempt+0x14/0x40
? __module_address+0x28/0xf0
? clone_fs_devices+0x4d/0x170 [btrfs]
? static_obj+0x4f/0x60
? lockdep_init_map_waits+0x43/0x200
? clone_fs_devices+0x4d/0x170 [btrfs]
clone_fs_devices+0x4d/0x170 [btrfs]
btrfs_read_chunk_tree+0x330/0x800 [btrfs]
open_ctree+0xb7c/0x18ce [btrfs]
? super_setup_bdi_name+0x79/0xd0
btrfs_mount_root.cold+0x13/0xfa [btrfs]
? vfs_parse_fs_string+0x84/0xb0
? rcu_read_lock_sched_held+0x52/0x60
? kfree+0x2b5/0x310
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
fc_mount+0xe/0x40
vfs_kern_mount.part.0+0x71/0x90
btrfs_mount+0x13b/0x3e0 [btrfs]
? cred_has_capability+0x7c/0x120
? rcu_read_lock_sched_held+0x52/0x60
? legacy_get_tree+0x30/0x50
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x7de/0xb30
? memdup_user+0x4e/0x90
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This is because btrfs_read_chunk_tree() can come upon DEV_EXTENT's and
then read the device, which takes the device_list_mutex. The
device_list_mutex needs to be taken before the chunk_mutex, so this is a
problem. We only really need the chunk mutex around adding the chunk,
so move the mutex around read_one_chunk.
An argument could be made that we don't even need the chunk_mutex here
as it's during mount, and we are protected by various other locks.
However we already have special rules for ->device_list_mutex, and I'd
rather not have another special case for ->chunk_mutex.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18c850fdc5 upstream.
There's long existed a lockdep splat because we open our bdev's under
the ->device_list_mutex at mount time, which acquires the bd_mutex.
Usually this goes unnoticed, but if you do loopback devices at all
suddenly the bd_mutex comes with a whole host of other dependencies,
which results in the splat when you mount a btrfs file system.
======================================================
WARNING: possible circular locking dependency detected
5.8.0-0.rc3.1.fc33.x86_64+debug #1 Not tainted
------------------------------------------------------
systemd-journal/509 is trying to acquire lock:
ffff970831f84db0 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x44/0x70 [btrfs]
but task is already holding lock:
ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (sb_pagefaults){.+.+}-{0:0}:
__sb_start_write+0x13e/0x220
btrfs_page_mkwrite+0x59/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
-> #5 (&mm->mmap_lock#2){++++}-{3:3}:
__might_fault+0x60/0x80
_copy_from_user+0x20/0xb0
get_sg_io_hdr+0x9a/0xb0
scsi_cmd_ioctl+0x1ea/0x2f0
cdrom_ioctl+0x3c/0x12b4
sr_block_ioctl+0xa4/0xd0
block_ioctl+0x3f/0x50
ksys_ioctl+0x82/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #4 (&cd->lock){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
sr_block_open+0xa2/0x180
__blkdev_get+0xdd/0x550
blkdev_get+0x38/0x150
do_dentry_open+0x16b/0x3e0
path_openat+0x3c9/0xa00
do_filp_open+0x75/0x100
do_sys_openat2+0x8a/0x140
__x64_sys_openat+0x46/0x70
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #3 (&bdev->bd_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
__blkdev_get+0x6a/0x550
blkdev_get+0x85/0x150
blkdev_get_by_path+0x2c/0x70
btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs]
open_fs_devices+0x88/0x240 [btrfs]
btrfs_open_devices+0x92/0xa0 [btrfs]
btrfs_mount_root+0x250/0x490 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x119/0x380 [btrfs]
legacy_get_tree+0x30/0x50
vfs_get_tree+0x28/0xc0
do_mount+0x8c6/0xca0
__x64_sys_mount+0x8e/0xd0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_run_dev_stats+0x36/0x420 [btrfs]
commit_cowonly_roots+0x91/0x2d0 [btrfs]
btrfs_commit_transaction+0x4e6/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
__mutex_lock+0x7b/0x820
btrfs_commit_transaction+0x48e/0x9f0 [btrfs]
btrfs_sync_file+0x38a/0x480 [btrfs]
__x64_sys_fdatasync+0x47/0x80
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
-> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}:
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
__mutex_lock+0x7b/0x820
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
asm_exc_page_fault+0x1e/0x30
other info that might help us debug this:
Chain exists of:
&fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(sb_pagefaults);
lock(&mm->mmap_lock#2);
lock(sb_pagefaults);
lock(&fs_info->reloc_mutex);
*** DEADLOCK ***
3 locks held by systemd-journal/509:
#0: ffff97083bdec8b8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x12e/0x4b0
#1: ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs]
#2: ffff97083144d6a8 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3f8/0x500 [btrfs]
stack backtrace:
CPU: 0 PID: 509 Comm: systemd-journal Not tainted 5.8.0-0.rc3.1.fc33.x86_64+debug #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack+0x92/0xc8
check_noncircular+0x134/0x150
__lock_acquire+0x1241/0x20c0
lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? lock_acquire+0xb0/0x400
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
__mutex_lock+0x7b/0x820
? btrfs_record_root_in_trans+0x44/0x70 [btrfs]
? kvm_sched_clock_read+0x14/0x30
? sched_clock+0x5/0x10
? sched_clock_cpu+0xc/0xb0
btrfs_record_root_in_trans+0x44/0x70 [btrfs]
start_transaction+0xd2/0x500 [btrfs]
btrfs_dirty_inode+0x44/0xd0 [btrfs]
file_update_time+0xc6/0x120
btrfs_page_mkwrite+0xda/0x560 [btrfs]
? sched_clock+0x5/0x10
do_page_mkwrite+0x4f/0x130
do_wp_page+0x3b0/0x4f0
handle_mm_fault+0xf47/0x1850
do_user_addr_fault+0x1fc/0x4b0
exc_page_fault+0x88/0x300
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fa3972fdbfe
Code: Bad RIP value.
Fix this by not holding the ->device_list_mutex at this point. The
device_list_mutex exists to protect us from modifying the device list
while the file system is running.
However it can also be modified by doing a scan on a device. But this
action is specifically protected by the uuid_mutex, which we are holding
here. We cannot race with opening at this point because we have the
->s_mount lock held during the mount. Not having the
->device_list_mutex here is perfectly safe as we're not going to change
the devices at this point.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add some comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4faf55b038 upstream.
->show_devname currently shows the lowest devid in the list. As the seed
devices have the lowest devid in the sprouted filesystem, the userland
tool such as findmnt end up seeing seed device instead of the device from
the read-writable sprouted filesystem. As shown below.
mount /dev/sda /btrfs
mount: /btrfs: WARNING: device write-protected, mounted read-only.
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111
btrfs dev add -f /dev/sdb /btrfs
umount /btrfs
mount /dev/sdb /btrfs
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111
All sprouts from a single seed will show the same seed device and the
same fsid. That's confusing.
This is causing problems in our prototype as there isn't any reference
to the sprout file-system(s) which is being used for actual read and
write.
This was added in the patch which implemented the show_devname in btrfs
commit 9c5085c147 ("Btrfs: implement ->show_devname").
I tried to look for any particular reason that we need to show the seed
device, there isn't any.
So instead, do not traverse through the seed devices, just show the
lowest devid in the sprouted fsid.
After the patch:
mount /dev/sda /btrfs
mount: /btrfs: WARNING: device write-protected, mounted read-only.
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sda /btrfs 899f7027-3e46-4626-93e7-7d4c9ad19111
btrfs dev add -f /dev/sdb /btrfs
mount -o rw,remount /dev/sdb /btrfs
findmnt --output SOURCE,TARGET,UUID /btrfs
SOURCE TARGET UUID
/dev/sdb /btrfs 595ca0e6-b82e-46b5-b9e2-c72a6928be48
mount /dev/sda /btrfs1
mount: /btrfs1: WARNING: device write-protected, mounted read-only.
btrfs dev add -f /dev/sdc /btrfs1
findmnt --output SOURCE,TARGET,UUID /btrfs1
SOURCE TARGET UUID
/dev/sdc /btrfs1 ca1dbb7a-8446-4f95-853c-a20f3f82bdbb
cat /proc/self/mounts | grep btrfs
/dev/sdb /btrfs btrfs rw,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0
/dev/sdc /btrfs1 btrfs ro,relatime,noacl,space_cache,subvolid=5,subvol=/ 0 0
Reported-by: Martin K. Petersen <martin.petersen@oracle.com>
CC: stable@vger.kernel.org # 4.19+
Tested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a93e01682e upstream.
When syncing the log, we used to update the log root tree without holding
neither the log_mutex of the subvolume root nor the log_mutex of log root
tree.
We used to have two critical sections delimited by the log_mutex of the
log root tree, so in the first one we incremented the log_writers of the
log root tree and on the second one we decremented it and waited for the
log_writers counter to go down to zero. This was because the update of
the log root tree happened between the two critical sections.
The use of two critical sections allowed a little bit more of parallelism
and required the use of the log_writers counter, necessary to make sure
we didn't miss any log root tree update when we have multiple tasks trying
to sync the log in parallel.
However after commit 06989c799f ("Btrfs: fix race updating log root
item during fsync") the log root tree update was moved into a critical
section delimited by the subvolume's log_mutex. Later another commit
moved the log tree update from that critical section into the second
critical section delimited by the log_mutex of the log root tree. Both
commits addressed different bugs.
The end result is that the first critical section delimited by the
log_mutex of the log root tree became pointless, since there's nothing
done between it and the second critical section, we just have an unlock
of the log_mutex followed by a lock operation. This means we can merge
both critical sections, as the first one does almost nothing now, and we
can stop using the log_writers counter of the log root tree, which was
incremented in the first critical section and decremented in the second
criticial section, used to make sure no one in the second critical section
started writeback of the log root tree before some other task updated it.
So just remove the mutex_unlock() followed by mutex_lock() of the log root
tree, as well as the use of the log_writers counter for the log root tree.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28a9579561 upstream.
We are incrementing the log_batch atomic counter of the root log tree but
we never use that counter, it's used only for the log trees of subvolume
roots. We started doing it when we moved the log_batch and log_write
counters from the global, per fs, btrfs_fs_info structure, into the
btrfs_root structure in commit 7237f18336 ("Btrfs: fix tree logs
parallel sync").
So just stop doing it for the log root tree and add a comment over the
field declaration so inform it's used only for log trees of subvolume
roots.
This patch is part of a series that has the following patches:
1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree
After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:
mkfs.btrfs -f /dev/sdk
mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
dbench -D /mnt/sdk -t 300 8
umount /mnt/dsk
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d60ba8de11 upstream.
clang static analysis flags this error
fs/btrfs/ref-verify.c:290:3: warning: Potential leak of memory pointed to by 're' [unix.Malloc]
kfree(be);
^~~~~
The problem is in this block of code:
if (root_objectid) {
struct root_entry *exist_re;
exist_re = insert_root_entry(&exist->roots, re);
if (exist_re)
kfree(re);
}
There is no 'else' block freeing when root_objectid is 0. Add the
missing kfree to the else branch.
Fixes: fd708b81d9 ("Btrfs: add a extent ref verify tool")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 851fd730a7 upstream.
[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted:
BTRFS: Transaction aborted (error -24)
WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
Call Trace:
create_pending_snapshots+0x82/0xa0 [btrfs]
btrfs_commit_transaction+0x275/0x8c0 [btrfs]
btrfs_mksubvol+0x4b9/0x500 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0x11a4/0x2da0 [btrfs]
do_vfs_ioctl+0xa9/0x640
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace 33f2f83f3d5250e9 ]---
BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
BTRFS info (device sda1): forced readonly
BTRFS warning (device sda1): Skipping commit of aborted transaction.
BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown
[CAUSE]
The error is EMFILE (Too many files open) and comes from the anonymous
block device allocation. The ids are in a shared pool of size 1<<20.
The ids are assigned to live subvolumes, ie. the root structure exists
in memory (eg. after creation or after the root appears in some path).
The pool could be exhausted if the numbers are not reclaimed fast
enough, after subvolume deletion or if other system component uses the
anon block devices.
[WORKAROUND]
Since it's not possible to completely solve the problem, we can only
minimize the time the id is allocated to a subvolume root.
Firstly, we can reduce the use of anon_dev by trees that are not
subvolume roots, like data reloc tree.
This patch will do extra check on root objectid, to skip roots that
don't need anon_dev. Currently it's only data reloc tree and orphan
roots.
Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 082b6c970f upstream.
[BUG]
When a lot of subvolumes are created, there is a user report about
transaction aborted caused by slow anonymous block device reclaim:
BTRFS: Transaction aborted (error -24)
WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs]
RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs]
Call Trace:
create_pending_snapshots+0x82/0xa0 [btrfs]
btrfs_commit_transaction+0x275/0x8c0 [btrfs]
btrfs_mksubvol+0x4b9/0x500 [btrfs]
btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
btrfs_ioctl+0x11a4/0x2da0 [btrfs]
do_vfs_ioctl+0xa9/0x640
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x5a/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace 33f2f83f3d5250e9 ]---
BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown
BTRFS info (device sda1): forced readonly
BTRFS warning (device sda1): Skipping commit of aborted transaction.
BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown
[CAUSE]
The anonymous device pool is shared and its size is 1M. It's possible to
hit that limit if the subvolume deletion is not fast enough and the
subvolumes to be cleaned keep the ids allocated.
[WORKAROUND]
We can't avoid the anon device pool exhaustion but we can shorten the
time the id is attached to the subvolume root once the subvolume becomes
invisible to the user.
Reported-by: Greed Rong <greedrong@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3502a8c0dc upstream.
On a filesystem with exhausted metadata, but still enough to start
balance, it's possible to hit this error:
[324402.053842] BTRFS info (device loop0): 1 enospc errors during balance
[324402.060769] BTRFS info (device loop0): balance: ended with status: -28
[324402.172295] BTRFS: error (device loop0) in reset_balance_state:3321: errno=-28 No space left
It fails inside reset_balance_state and turns the filesystem to
read-only, which is unnecessary and should be fixed too, but the problem
is caused by lack for space when the balance item is deleted. This is a
one-time operation and from the same rank as unlink that is allowed to
use the global block reserve. So do the same for the balance item.
Status of the filesystem (100GiB) just after the balance fails:
$ btrfs fi df mnt
Data, single: total=80.01GiB, used=38.58GiB
System, single: total=4.00MiB, used=16.00KiB
Metadata, single: total=19.99GiB, used=19.48GiB
GlobalReserve, single: total=512.00MiB, used=50.11MiB
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dae68d7fd4 upstream.
If context is not NULL in acpiphp_grab_context(), but the
is_going_away flag is set for the device's parent, the reference
counter of the context needs to be decremented before returning
NULL or the context will never be freed, so make that happen.
Fixes: edf5bf34d4 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0c7baca18 upstream.
John reported that on a RK3288 system the perf per CPU interrupts are all
affine to CPU0 and provided the analysis:
"It looks like what happens is that because the interrupts are not per-CPU
in the hardware, armpmu_request_irq() calls irq_force_affinity() while
the interrupt is deactivated and then request_irq() with IRQF_PERCPU |
IRQF_NOBALANCING.
Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls
irq_setup_affinity() which returns early because IRQF_PERCPU and
IRQF_NOBALANCING are set, leaving the interrupt on its original CPU."
This was broken by the recent commit which blocked interrupt affinity
setting in hardware before activation of the interrupt. While this works in
general, it does not work for this particular case. As contrary to the
initial analysis not all interrupt chip drivers implement an activate
callback, the safe cure is to make the deferred interrupt affinity setting
at activation time opt-in.
Implement the necessary core logic and make the two irqchip implementations
for which this is required opt-in. In hindsight this would have been the
right thing to do, but ...
Fixes: baedb87d1b ("genirq/affinity: Handle affinity setting on inactive interrupts correctly")
Reported-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a018944ee upstream.
When mounting with Kerberos, users have been confused about the
default error returned in scenarios in which either keyutils is
not installed or the user did not properly acquire a krb5 ticket.
Log a warning message in the case that "ENOKEY" is returned
from the get_spnego_key upcall so that users can better understand
why mount failed in those two cases.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba925fa350 upstream.
During s390_enable_sie(), we need to take care of splitting all qemu user
process THP mappings. This is currently done with follow_page(FOLL_SPLIT),
by simply iterating over all vma ranges, with PAGE_SIZE increment.
This logic is sub-optimal and can result in a lot of unnecessary overhead,
especially when using qemu and ASAN with large shadow map. Ilya reported
significant system slow-down with one CPU busy for a long time and overall
unresponsiveness.
Fix this by using walk_page_vma() and directly calling split_huge_pmd()
only for present pmds, which greatly reduces overhead.
Cc: <stable@vger.kernel.org> # v5.4+
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f4aa52387 upstream.
During initialization of the DASD DIAG driver a request is issued
that has a bio structure that resides on the stack. With virtually
mapped kernel stacks this bio address might be in virtual storage
which is unsuitable for usage with the diag250 call.
In this case the device can not be set online using the DIAG
discipline and fails with -EOPNOTSUP.
In the system journal the following error message is presented:
dasd: X.X.XXXX Setting the DASD online with discipline DIAG failed
with rc=-95
Fix by allocating the bio structure instead of having it on the stack.
Fixes: ce3dc44749 ("s390: add support for virtually mapped kernel stacks")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: stable@vger.kernel.org #4.20
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 444da3f524 upstream.
When ur_load_imm_any() is inlined into jeq_imm(), it's possible for the
compiler to deduce a case where _val can only have the value of -1 at
compile time. Specifically,
/* struct bpf_insn: _s32 imm */
u64 imm = insn->imm; /* sign extend */
if (imm >> 32) { /* non-zero only if insn->imm is negative */
/* inlined from ur_load_imm_any */
u32 __imm = imm >> 32; /* therefore, always 0xffffffff */
if (__builtin_constant_p(__imm) && __imm > 255)
compiletime_assert_XXX()
This can result in tripping a BUILD_BUG_ON() in __BF_FIELD_CHECK() that
checks that a given value is representable in one byte (interpreted as
unsigned).
FIELD_FIT() should return true or false at runtime for whether a value
can fit for not. Don't break the build over a value that's too large for
the mask. We'd prefer to keep the inlining and compiler optimizations
though we know this case will always return false.
Cc: stable@vger.kernel.org
Fixes: 1697599ee3 ("bitfield.h: add FIELD_FIT() helper")
Link: https://lore.kernel.org/kernel-hardening/CAK7LNASvb0UDJ0U5wkYYRzTAdnEs64HjXpEUL7d=V0CXiAXcNw@mail.gmail.com/
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Debugged-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e27c99104 upstream.
There is this call chain:
cvm_encrypt -> cvm_enc_dec -> cptvf_do_request -> process_request -> kzalloc
where we call sleeping allocator function even if CRYPTO_TFM_REQ_MAY_SLEEP
was not specified.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.11+
Fixes: c694b23329 ("crypto: cavium - Add the Virtual Function driver for CPT")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a302808c6 upstream.
Running the crypto manager self tests with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS may result in several types of errors
when using the ccp-crypto driver:
alg: skcipher: cbc-des3-ccp encryption failed on test vector 0; expected_error=0, actual_error=-5 ...
alg: skcipher: ctr-aes-ccp decryption overran dst buffer on test vector 0 ...
alg: ahash: sha224-ccp test failed (wrong result) on test vector ...
These errors are the result of improper processing of scatterlists mapped
for DMA.
Given a scatterlist in which entries are merged as part of mapping the
scatterlist for DMA, the DMA length of a merged entry will reflect the
combined length of the entries that were merged. The subsequent
scatterlist entry will contain DMA information for the scatterlist entry
after the last merged entry, but the non-DMA information will be that of
the first merged entry.
The ccp driver does not take this scatterlist merging into account. To
address this, add a second scatterlist pointer to track the current
position in the DMA mapped representation of the scatterlist. Both the DMA
representation and the original representation of the scatterlist must be
tracked as while most of the driver can use just the DMA representation,
scatterlist_map_and_copy() must use the original representation and
expects the scatterlist pointer to be accurate to the original
representation.
In order to properly walk the original scatterlist, the scatterlist must
be walked until the combined lengths of the entries seen is equal to the
DMA length of the current entry being processed in the DMA mapped
representation.
Fixes: 63b945091a ("crypto: ccp - CCP device driver and interface support")
Signed-off-by: John Allen <john.allen@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c06c76602e upstream.
clang static analysis flags this error
qat_uclo.c:297:3: warning: Attempt to free released memory
[unix.Malloc]
kfree(*init_tab_base);
^~~~~~~~~~~~~~~~~~~~~
When input *init_tab_base is null, the function allocates memory for
the head of the list. When there is problem allocating other list
elements the list is unwound and freed. Then a check is made if the
list head was allocated and is also freed.
Keeping track of the what may need to be freed is the variable 'tail_old'.
The unwinding/freeing block is
while (tail_old) {
mem_init = tail_old->next;
kfree(tail_old);
tail_old = mem_init;
}
The problem is that the first element of tail_old is also what was
allocated for the list head
init_header = kzalloc(sizeof(*init_header), GFP_KERNEL);
...
*init_tab_base = init_header;
flag = 1;
}
tail_old = init_header;
So *init_tab_base/init_header are freed twice.
There is another problem.
When the input *init_tab_base is non null the tail_old is calculated by
traveling down the list to first non null entry.
tail_old = init_header;
while (tail_old->next)
tail_old = tail_old->next;
When the unwinding free happens, the last entry of the input list will
be freed.
So the freeing needs a general changed.
If locally allocated the first element of tail_old is freed, else it
is skipped. As a bit of cleanup, reset *init_tab_base if it came in
as null.
Fixes: b4b7e67c91 ("crypto: qat - Intel(R) QAT ucode part of fw loader")
Cc: <stable@vger.kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ead051780 upstream.
There is this call chain:
sec_alg_skcipher_encrypt -> sec_alg_skcipher_crypto ->
sec_alg_alloc_and_calc_split_sizes -> kcalloc
where we call sleeping allocator function even if CRYPTO_TFM_REQ_MAY_SLEEP
was not specified.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.19+
Fixes: 915e4e8413 ("crypto: hisilicon - SEC security accelerator driver")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd49e03280 upstream.
When building a kernel with CONFIG_PSTORE=y and CONFIG_CRYPTO not set,
a build error happens:
ld: fs/pstore/platform.o: in function `pstore_dump':
platform.c:(.text+0x3f9): undefined reference to `crypto_comp_compress'
ld: fs/pstore/platform.o: in function `pstore_get_backend_records':
platform.c:(.text+0x784): undefined reference to `crypto_comp_decompress'
This because some pstore code uses crypto_comp_(de)compress regardless
of the CONFIG_CRYPTO status. Fix it by wrapping the (de)compress usage
by IS_ENABLED(CONFIG_PSTORE_COMPRESS)
Signed-off-by: Matteo Croce <mcroce@linux.microsoft.com>
Link: https://lore.kernel.org/lkml/20200706234045.9516-1-mcroce@linux.microsoft.com
Fixes: cb3bee0369 ("pstore: Use crypto compress API")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c4e79d99e upstream.
The size of the buffers for storing context's and sessions can vary from
arch to arch as PAGE_SIZE can be anything between 4 kB and 256 kB (the
maximum for PPC64). Define a fixed buffer size set to 16 kB. This should be
enough for most use with three handles (that is how many we allow at the
moment). Parametrize the buffer size while doing this, so that it is easier
to revisit this later on if required.
Cc: stable@vger.kernel.org
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: 745b361e98 ("tpm: infrastructure for TPM spaces")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec0160891e upstream.
Commit 711419e504 ("irqdomain: Add the missing assignment of
domain->fwnode for named fwnode") unintentionally caused a dangling pointer
page fault issue on firmware nodes that were freed after IRQ domain
allocation. Commit e3beca48a4 fixed that dangling pointer issue by only
freeing the firmware node after an IRQ domain allocation failure. That fix
no longer frees the firmware node immediately, but leaves the firmware node
allocated after the domain is removed.
The firmware node must be kept around through irq_domain_remove, but should be
freed it afterwards.
Add the missing free operations after domain removal where where appropriate.
Fixes: e3beca48a4 ("irqdomain/treewide: Keep firmware node unconditionally allocated")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b24993c21 upstream.
When using kexec the SBA IOMMU IBASE might still have the RE
bit set. This triggers a WARN_ON when trying to write back the
IBASE register later, and it also makes some mask calculations fail.
Cc: <stable@vger.kernel.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e96ebd589d upstream.
This patch implements the __smp_store_release and __smp_load_acquire barriers
using ordered stores and loads. This avoids the sync instruction present in
the generic implementation.
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e72b23dec1 upstream.
No need to use an ordered store in pa_tlb_lock() and update the comment
regarng usage of the sid register to unlocak a spinlock in
tlb_unlock0().
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0dcd3c94e0 upstream.
Each ondisk inode should be aligned with inode slot boundary
(32-byte alignment) because of nid calculation formula, so all
compact inodes (32 byte) cannot across page boundary. However,
extended inode is now 64-byte form, which can across page boundary
in principle if the location is specified on purpose, although
it's hard to be generated by mkfs due to the allocation policy
and rarely used by Android use case now mainly for > 4GiB files.
For now, only two fields `i_ctime_nsec` and `i_nlink' couldn't
be read from disk properly and cause out-of-bound memory read
with random value.
Let's fix now.
Fixes: 431339ba90 ("staging: erofs: add inode operations")
Cc: <stable@vger.kernel.org> # 4.19+
Link: https://lore.kernel.org/r/20200729175801.GA23973@xiangao.remote.csb
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa9e862d7d upstream.
Simply copying all xfers from userspace into one bounce buffer causes
alignment problems if the SPI controller uses DMA.
Ensure that all transfer data blocks within the rx and tx bounce buffers
are aligned for DMA (according to ARCH_KMALLOC_MINALIGN).
Alignment may increase the usage of the bounce buffers. In some cases,
the buffers may need to be increased using the "bufsiz" module
parameter.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10470dec3d upstream.
Commit 0c868627e6 (cpufreq: dt: Allow platform specific
intermediate callbacks) added two function pointers to the
struct cpufreq_dt_platform_data. However, armada37xx_cpufreq_driver_init()
has this struct (pdata) located on the stack and uses only "suspend"
and "resume" fields. So these newly added "get_intermediate" and
"target_intermediate" pointers are uninitialized and contain arbitrary
non-null values, causing all kinds of trouble.
For instance, here is an oops on espressobin after an attempt to change
the cpefreq governor:
[ 29.174554] Unable to handle kernel execute from non-executable memory at virtual address ffff00003f87bdc0
...
[ 29.269373] pc : 0xffff00003f87bdc0
[ 29.272957] lr : __cpufreq_driver_target+0x138/0x580
...
Fixed by zeroing out pdata before use.
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cc46ae565 upstream.
The locking around governors handling isn't adequate currently.
The list of governors should never be traversed without the locking
in place. Also governor modules must not be removed while the code
in them is still in use.
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d474f96104 upstream.
If the NFS_LAYOUT_RETURN_REQUESTED flag is set, we want to return the
layout as soon as possible, meaning that the affected layout segments
should be marked as invalid, and should no longer be in use for I/O.
Fixes: f0b429819b ("pNFS: Ignore non-recalled layouts in pnfs_layout_need_return()")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff041727e9 upstream.
If the layout segment is still in use for a read or a write, we should
not move it to the layout plh_return_segs list. If we do, we can end
up returning the layout while I/O is still in progress.
Fixes: e0b7d420f7 ("pNFS: Don't discard layout segments that are marked for return")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd74048108 upstream.
If we hit an earlier error path in io_uring_create(), then we will have
accounted memory, but not set ctx->{sq,cq}_entries yet. Then when the
ring is torn down in error, we use those values to unaccount the memory.
Ensure we set the ctx entries before we're able to hit a potential error
path.
Cc: stable@vger.kernel.org
Reported-by: Tomáš Chaloupka <chalucha@gmail.com>
Tested-by: Tomáš Chaloupka <chalucha@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e30cc79cc8 upstream.
Syzbot reports a NULL-ptr deref in the kref_put() call:
BUG: KASAN: null-ptr-deref in media_request_put drivers/media/mc/mc-request.c:81 [inline]
kref_put include/linux/kref.h:64 [inline]
media_request_put drivers/media/mc/mc-request.c:81 [inline]
media_request_close+0x4d/0x170 drivers/media/mc/mc-request.c:89
__fput+0x2ed/0x750 fs/file_table.c:281
task_work_run+0x147/0x1d0 kernel/task_work.c:123
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_usermode_loop arch/x86/entry/common.c:165 [inline]
prepare_exit_to_usermode+0x48e/0x600 arch/x86/entry/common.c:196
What led to this crash was an injected memory allocation failure in
media_request_alloc():
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
should_failslab+0x5/0x20
kmem_cache_alloc_trace+0x57/0x300
? anon_inode_getfile+0xe5/0x170
media_request_alloc+0x339/0x440
media_device_request_alloc+0x94/0xc0
media_device_ioctl+0x1fb/0x330
? do_vfs_ioctl+0x6ea/0x1a00
? media_ioctl+0x101/0x120
? __media_device_usb_init+0x430/0x430
? media_poll+0x110/0x110
__se_sys_ioctl+0xf9/0x160
do_syscall_64+0xf3/0x1b0
When that allocation fails, filp->private_data is left uninitialized
which media_request_close() does not expect and crashes.
To avoid this, reorder media_request_alloc() such that
allocating the struct file happens as the last step thus
media_request_close() will no longer get called for a partially created
media request.
Reported-by: syzbot+6bed2d543cf7e48b822b@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Fixes: 10905d70d7 ("media: media-request: implement media requests")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b7ecc241a upstream.
Further investigation of the L-R swap problem on the MS2109 reveals that
the problem isn't that the channels are swapped, but rather that they
are swapped and also out of phase by one sample. In other words, the
issue is actually that the very first frame that comes from the hardware
is a half-frame containing only the right channel, and after that
everything becomes offset.
So introduce a new quirk field to drop the very first 2 bytes that come
in after the format is configured and a capture stream starts. This puts
the channels in phase and in the correct order.
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20200810082400.225858-1-marcan@marcan.st
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d76f3351ce ]
In the case of TPROXY, bind_conflict optimizations for SO_REUSEADDR or
SO_REUSEPORT are broken, possibly resulting in O(n) instead of O(1) bind
behaviour or in the incorrect reuse of a bind.
the kernel keeps track for each bind_bucket if all sockets in the
bind_bucket support SO_REUSEADDR or SO_REUSEPORT in two fastreuse flags.
These flags allow skipping the costly bind_conflict check when possible
(meaning when all sockets have the proper SO_REUSE option).
For every socket added to a bind_bucket, these flags need to be updated.
As soon as a socket that does not support reuse is added, the flag is
set to false and will never go back to true, unless the bind_bucket is
deleted.
Note that there is no mechanism to re-evaluate these flags when a socket
is removed (this might make sense when removing a socket that would not
allow reuse; this leaves room for a future patch).
For this optimization to work, it is mandatory that these flags are
properly initialized and updated.
When a child socket is created from a listen socket in
__inet_inherit_port, the TPROXY case could create a new bind bucket
without properly initializing these flags, thus preventing the
optimization to work. Alternatively, a socket not allowing reuse could
be added to an existing bind bucket without updating the flags, causing
bind_conflict to never be called as it should.
Call inet_csk_update_fastreuse when __inet_inherit_port decides to create
a new bind_bucket or use a different bind_bucket than the one of the
listen socket.
Fixes: 093d282321 ("tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()")
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Tim Froidcoeur <tim.froidcoeur@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8a7f280f29 ]
Commit dacce2be33 ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, while
calculating tcp hdr length, it does not take into account if the
packet is encapsulated or not.
This patch fixes this issue by using correct reference for inner
tcp header.
Fixes: dacce2be33 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f19008e676 ]
When TFO keys are read back on big endian systems either via the global
sysctl interface or via getsockopt() using TCP_FASTOPEN_KEY, the values
don't match what was written.
For example, on s390x:
# echo "1-2-3-4" > /proc/sys/net/ipv4/tcp_fastopen_key
# cat /proc/sys/net/ipv4/tcp_fastopen_key
02000000-01000000-04000000-03000000
Instead of:
# cat /proc/sys/net/ipv4/tcp_fastopen_key
00000001-00000002-00000003-00000004
Fix this by converting to the correct endianness on read. This was
reported by Colin Ian King when running the 'tcp_fastopen_backup_key' net
selftest on s390x, which depends on the read value matching what was
written. I've confirmed that the test now passes on big and little endian
systems.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Fixes: 438ac88009 ("net: fastopen: robustness and endianness fixes for SipHash")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dumazet <edumazet@google.com>
Reported-and-tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b06c19d9f8 ]
When MSG_OOB is specified to tls_device_sendpage() the mapped page is
never unmapped.
Hold off mapping the page until after the flags are checked and the page
is actually needed.
Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce787a5a07 ]
We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed
accordingly.
Fixes: 00e188ef6a ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d02cbc4613 ]
A recent commit introduced a late error path in phy_device_create()
which fails to release the device name allocated by dev_set_name().
Fixes: 13d0ab6750 ("net: phy: check return code when requesting PHY driver module")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0f5907af39 ]
If we failed to assign proto idx, we free the twsk_slab_name but forget to
free the twsk_slab. Add a helper function tw_prot_cleanup() to free these
together and also use this helper function in proto_unregister().
Fixes: b45ce32135 ("sock: fix potential memory leak in proto_register()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c7ca03c216 ]
1. Added a skb->len check
This driver expects upper layers to include a pseudo header of 1 byte
when passing down a skb for transmission. This driver will read this
1-byte header. This patch added a skb->len check before reading the
header to make sure the header exists.
2. Changed to use needed_headroom instead of hard_header_len to request
necessary headroom to be allocated
In net/packet/af_packet.c, the function packet_snd first reserves a
headroom of length (dev->hard_header_len + dev->needed_headroom).
Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header,
which calls dev->header_ops->create, to create the link layer header.
If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of
length (dev->hard_header_len), and assumes the user to provide the
appropriate link layer header.
So according to the logic of af_packet.c, dev->hard_header_len should
be the length of the header that would be created by
dev->header_ops->create.
However, this driver doesn't provide dev->header_ops, so logically
dev->hard_header_len should be 0.
So we should use dev->needed_headroom instead of dev->hard_header_len
to request necessary headroom to be allocated.
This change fixes kernel panic when this driver is used with AF_PACKET
SOCK_RAW sockets.
Call stack when panic:
[ 168.399197] skbuff: skb_under_panic: text:ffffffff819d95fb len:20
put:14 head:ffff8882704c0a00 data:ffff8882704c09fd tail:0x11 end:0xc0
dev:veth0
...
[ 168.399255] Call Trace:
[ 168.399259] skb_push.cold+0x14/0x24
[ 168.399262] eth_header+0x2b/0xc0
[ 168.399267] lapbeth_data_transmit+0x9a/0xb0 [lapbether]
[ 168.399275] lapb_data_transmit+0x22/0x2c [lapb]
[ 168.399277] lapb_transmit_buffer+0x71/0xb0 [lapb]
[ 168.399279] lapb_kick+0xe3/0x1c0 [lapb]
[ 168.399281] lapb_data_request+0x76/0xc0 [lapb]
[ 168.399283] lapbeth_xmit+0x56/0x90 [lapbether]
[ 168.399286] dev_hard_start_xmit+0x91/0x1f0
[ 168.399289] ? irq_init_percpu_irqstack+0xc0/0x100
[ 168.399291] __dev_queue_xmit+0x721/0x8e0
[ 168.399295] ? packet_parse_headers.isra.0+0xd2/0x110
[ 168.399297] dev_queue_xmit+0x10/0x20
[ 168.399298] packet_sendmsg+0xbf0/0x19b0
......
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 88fd1cb80d ]
After @blk_fill_in_prog_lock is acquired there is an early out vnet
situation that can occur. In that case, the rwlock needs to be
released.
Also, since @blk_fill_in_prog_lock is only acquired when @tp_version
is exactly TPACKET_V3, only release it on that exact condition as
well.
And finally, add sparse annotation so that it is clearer that
prb_fill_curr_block() and prb_clear_blk_fill_status() are acquiring
and releasing @blk_fill_in_prog_lock, respectively. sparse is still
unable to understand the balance, but the warnings are now on a
higher level that make more sense.
Fixes: 632ca50f2c ("af_packet: TPACKET_V3: replace busy-wait loop")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 44069737ac ]
Clang's integrated assembler complains "invalid reassignment of
non-absolute variable 'var_ddq_add'" while assembling
arch/x86/crypto/aes_ctrby8_avx-x86_64.S. It was because var_ddq_add was
reassigned with non-absolute values several times, which IAS did not
support. We can avoid the reassignment by replacing the uses of
var_ddq_add with its definitions accordingly to have compatilibility
with IAS.
Link: https://github.com/ClangBuiltLinux/linux/issues/1008
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Reported-by: Fangrui Song <maskray@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # build+boot Linux v5.7.5; clang v11.0.0-git
Signed-off-by: Jian Cai <caij2003@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ab49526b5 ]
syzbot found its way in 86_fsgsbase_read_task() and triggered this oops:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 6866 Comm: syz-executor262 Not tainted 5.8.0-syzkaller #0
RIP: 0010:x86_fsgsbase_read_task+0x16d/0x310 arch/x86/kernel/process_64.c:393
Call Trace:
putreg32+0x3ab/0x530 arch/x86/kernel/ptrace.c:876
genregs32_set arch/x86/kernel/ptrace.c:1026 [inline]
genregs32_set+0xa4/0x100 arch/x86/kernel/ptrace.c:1006
copy_regset_from_user include/linux/regset.h:326 [inline]
ia32_arch_ptrace arch/x86/kernel/ptrace.c:1061 [inline]
compat_arch_ptrace+0x36c/0xd90 arch/x86/kernel/ptrace.c:1198
__do_compat_sys_ptrace kernel/ptrace.c:1420 [inline]
__se_compat_sys_ptrace kernel/ptrace.c:1389 [inline]
__ia32_compat_sys_ptrace+0x220/0x2f0 kernel/ptrace.c:1389
do_syscall_32_irqs_on arch/x86/entry/common.c:84 [inline]
__do_fast_syscall_32+0x57/0x80 arch/x86/entry/common.c:126
do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:149
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
This can happen if ptrace() or sigreturn() pokes an LDT selector into FS
or GS for a task with no LDT and something tries to read the base before
a return to usermode notices the bad selector and fixes it.
The fix is to make sure ldt pointer is not NULL.
Fixes: 07e1d88ada ("x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately")
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 986a4b63d3 ]
Braino when converting "buf->len -=" to "buf->len = len -".
The result is under-estimation of the ralign and rslack values. On
krb5p mounts, this has caused READDIR to fail with EIO, and KASAN
splats when decoding READLINK replies.
As a result of fixing this oversight, the gss_unwrap method now
returns a buf->len that can be shorter than priv_len for small
RPC messages. The additional adjustment done in unwrap_priv_data()
can underflow buf->len. This causes the nfsd_request_too_large
check to fail during some NFSv3 operations.
Reported-by: Marian Rainer-Harbach
Reported-by: Pierre Sauter <pierre.sauter@stwm.de>
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1886277
Fixes: 31c9590ae4 ("SUNRPC: Add "@len" parameter to gss_unwrap()")
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e814eecbe3 ]
Commit 07d0ff3b0c ("svcrdma: Clean up Read chunk path") moved the
page saver logic so that it gets executed event when an error occurs.
In that case, the I/O is never posted, and those pages are then
leaked. Errors in this path, however, are quite rare.
Fixes: 07d0ff3b0c ("svcrdma: Clean up Read chunk path")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f46fe79ff1 ]
This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no
pinctrl_map is added. The current behavior is to return 0 when
!PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry()
incorrectly assumes that a map was added and sets num_maps = 2.
Analysis:
=========
The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf()
if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf()
returns 0 to indicate there was no error and num_maps is then set to 2:
980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,
981 struct device_node *np,
982 struct pinctrl_map **map,
983 unsigned *num_maps,
984 const char **pgnames)
985 {
<snip>
1053 (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
1054 (*map)->data.mux.group = np->name;
1055 (*map)->data.mux.function = np->name;
1056
1057 if (PCS_HAS_PINCONF && function) {
1058 res = pcs_parse_pinconf(pcs, np, function, map);
1059 if (res)
1060 goto free_pingroups;
1061 *num_maps = 2;
1062 } else {
1063 *num_maps = 1;
1064 }
However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or
!nconfs. I believe these conditions should indicate that no map was
added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry()
will set num_maps = 2 even though no maps were successfully added, as
it does not reach "m++" on line 940:
895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
896 struct pcs_function *func,
897 struct pinctrl_map **map)
898
899 {
900 struct pinctrl_map *m = *map;
<snip>
917 /* If pinconf isn't supported, don't parse properties in below. */
918 if (!PCS_HAS_PINCONF)
919 return 0;
920
921 /* cacluate how much properties are supported in current node */
922 for (i = 0; i < ARRAY_SIZE(prop2); i++) {
923 if (of_find_property(np, prop2[i].name, NULL))
924 nconfs++;
925 }
926 for (i = 0; i < ARRAY_SIZE(prop4); i++) {
927 if (of_find_property(np, prop4[i].name, NULL))
928 nconfs++;
929 }
930 if (!nconfs)
919 return 0;
932
933 func->conf = devm_kcalloc(pcs->dev,
934 nconfs, sizeof(struct pcs_conf_vals),
935 GFP_KERNEL);
936 if (!func->conf)
937 return -ENOMEM;
938 func->nconfs = nconfs;
939 conf = &(func->conf[0]);
940 m++;
This situtation will cause a boot failure [0] on the BeagleBone Black
(AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi
has compatible = "pinconf-single" instead of "pinctrl-single".
The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF
or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no
map was added.
Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish
between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps
is set to 1 as it is valid for pinconf to be enabled and a given pin
group to not any pinconf properties.
[0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/
Fixes: 9dddb4df90 ("pinctrl: single: support generic pinconf")
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20200608125143.GA2789203@x1
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ffddafc3a ]
Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking
the kobject.
Set do_unreg = 1 before kobject_init_and_add() to ensure that
kobject_put() can be called in its error patch.
Fixes: 901195ed7f ("Kobject: change GFS2 to use kobject_init_and_add")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3207f715c3 ]
Fix memory allocation for ethernet address hash table.
The code was wrongly allocating an array for eth hash table which
is incorrect because this is the main structure for eth hash table
(struct eth_hash_t) that contains inside a number of elements.
Fixes: 57ba4c9b56 ("fsl/fman: Add FMan MAC support")
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc79fd8f55 ]
The parameter 'priority' is incorrectly forced to zero which ultimately
induces logically dead code in the subsequent lines.
Fixes: 57ba4c9b56 ("fsl/fman: Add FMan MAC support")
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99f47abd9f ]
Potentially overflowing expression (ts_freq << 16 and intgr << 16)
declared as type u32 (32-bit unsigned) is evaluated using 32-bit
arithmetic and then used in a context that expects an expression of
type u64 (64-bit unsigned) which ultimately is used as 16-bit
unsigned by typecasting to u16. Fixed by using an unsigned 32-bit
integer since the value is truncated anyway in the end.
Fixes: 414fd46e77 ("fsl/fman: Add FMan support")
Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36f28f7687 ]
Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()', in
'spider_net_init_chain()'.
Fixes: d4ed8f8d1f ("Spidernet DMA coalescing")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0470a48880 ]
In function hw_atl_a0_hw_multicast_list_set(), when an invalid
request is encountered, a negative error code should be returned.
Fixes: bab6de8fd1 ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions")
Cc: David VomLehn <vomlehn@texas.net>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b206490940 ]
The DR TX state machine supports the following order:
modify header, push vlan and encapsulation.
Instead fs_dr would pass:
push vlan, modify header and encapsulation.
The above caused the rule creation to fail on invalid action
sequence provided error.
Fixes: 6a48faeeca ("net/mlx5: Add direct rule fs_cmd implementation")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a278f3d819 ]
The '&&' command seems to have a bad effect when $(cmd_$(1)) exits with
non-zero effect: the command failure is masked (despite `set -e`) and all but
the first command of $(dep-cmd) is executed (successfully, as they are mostly
printfs), thus overall returning 0 in the end.
This means in practice that despite compilation errors, tools's build Makefile
will return success. We see this very reliably with libbpf's Makefile, which
doesn't get compilation error propagated properly. This in turns causes issues
with selftests build, as well as bpftool and other projects that rely on
building libbpf.
The fix is simple: don't use &&. Given `set -e`, we don't need to chain
commands with &&. The shell will exit on first failure, giving desired
behavior and propagating error properly.
Fixes: 275e2d9559 ("tools build: Move dependency copy into function")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20200731024244.872574-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f194bd4ca ]
The coex mechanism used to skip upon the freeze flag is raised.
That will cause the coex mechanism being skipped unexpectedly.
Coex only wanted to keep the TDMA table from being changed by
BT side.
So, check the freeze and reason, if the coex reason is coming
from BT info, skip it, to make sure the coex triggered by Wifi
itself can work.
This is required for the AP mode, while the control flow is
different with STA mode. When starting an AP mode, the AP mode
needs to start working immedaitely after leaving IPS, and the
freeze flag could be raised. If the coex info is skipped, then
the AP mode will not set the antenna owner, leads to TX stuck.
Fixes: 4136214f7c ("rtw88: add BT co-existence support")
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200717064937.27966-5-yhchuang@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dd86b901d ]
Fix the transmission is not sent with short GI under
some conditions even if the receiver supports short GI.
If VHT capability IE exists in the beacon, the original
code uses the short GI for 80M field as driver's short GI
setting for transmission, even the current bandwidth is
not 80MHz.
Short GI supported fields for 20M/40M are informed in HT
capability information element, and short GI supported
field for 80M is informed in VHT capability information
element.
These three fields may be set to different values.
Driver needs to record each short GI support field for
each bandwidth, and send correct info depends on current
bandwidth to the WiFi firmware.
Fixes: e3037485c6 ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200717064937.27966-3-yhchuang@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcc46cb8a0 ]
In the ice_init_hw_tbls, if the devm_kcalloc for es->written fails, catch
that error and bail out gracefully, instead of continuing with a NULL
pointer.
Fixes: 32d63fa1e9 ("ice: Initialize DDP package structures")
Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02472e28b9 ]
Discard events that don't contain any entries. This shouldn't happen,
but subsequent code relies on being able to use entry 0. So better
be safe than accessing garbage.
Fixes: b4d72c08b3 ("qeth: bridgeport support - basic control")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d3f01dcdc ]
After carefully checking, it appears that both tdmout and tdmin require the
rising edge of the sclk they get to be synchronized with the frame sync
event (which should be a rising edge of lrclk).
TDMIN was improperly set before this patch. Remove the sclk_invert quirk
which is no longer needed and fix the sclk phase.
Fixes: 1a11d88f49 ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c37ad2f52 ]
The Armada 8K cpufreq driver needs the Armada AP CPU CLK
to work. This dependency is currently not satisfied and
the ARMADA_AP_CPU_CLK can not be selected independently.
Add it to the cpufreq Armada8k driver.
Fixes: f525a67053 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f8cf64758 ]
For drivers that don't have the error handling callbacks we implement
recovery by removing the device and re-probing it. This causes the sysfs
directory for the PCI device to be removed which causes the following
spurious error to be printed when checking the PE state:
Breaking 0005:03:00.0...
./eeh-basic.sh: line 13: can't open /sys/bus/pci/devices/0005:03:00.0/eeh_pe_state: no such file
0005:03:00.0, waited 0/60
0005:03:00.0, waited 1/60
0005:03:00.0, waited 2/60
0005:03:00.0, waited 3/60
0005:03:00.0, waited 4/60
0005:03:00.0, waited 5/60
0005:03:00.0, waited 6/60
0005:03:00.0, waited 7/60
0005:03:00.0, Recovered after 8 seconds
We currently try to avoid this by checking if the PE state file exists
before reading from it. This is however inherently racy so re-work the
state checking so that we only read from the file once, and we squash any
errors that occur while reading.
Fixes: 85d86c8aa5 ("selftests/powerpc: Add basic EEH selftest")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727010127.23698-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2a8864728 ]
The block reservation calculation for inode allocation is supposed
to consist of the blocks required for the inode chunk plus
(maxlevels-1) of the inode btree multiplied by the number of inode
btrees in the fs (2 when finobt is enabled, 1 otherwise).
Instead, the macro returns (ialloc_blocks + 2) due to a precedence
error in the calculation logic. This leads to block reservation
overruns via generic/531 on small block filesystems with finobt
enabled. Add braces to fix the calculation and reserve the
appropriate number of blocks.
Fixes: 9d43b180af ("xfs: update inode allocation/free transaction reservations for finobt")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 788abc6d9d ]
Alter the rtl8366_vlan_add() to call rtl8366_set_vlan()
inside the loop that goes over all VIDs since we now
properly support calling that function more than once.
Augment the loop to postincrement as this is more
intuitive.
The loop moved past the last VID but called
rtl8366_set_vlan() with the port number instead of
the VID, assuming a 1-to-1 correspondence between
ports and VIDs. This was also a bug.
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: d8652956cf ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15ab7906cc ]
The RTL8366 would not handle adding new members (ports) to
a VLAN: the code assumed that ->port_vlan_add() was only
called once for a single port. When intializing the
switch with .configure_vlan_while_not_filtering set to
true, the function is called numerous times for adding
all ports to VLAN1, which was something the code could
not handle.
Alter rtl8366_set_vlan() to just |= new members and
untagged flags to 4k and MC VLAN table entries alike.
This makes it possible to just add new ports to a
VLAN.
Put in some helpful debug code that can be used to find
any further bugs here.
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: d8652956cf ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 202798db95 ]
We should not call hci_unregister_dev if the device was not
successfully registered.
Fixes: c34dc3bfa7 ("Bluetooth: hci_serdev: Introduce hci_uart_unregister_device()")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccf193dee1 ]
clang static analysis flags this error
88pm860x_battery.c:522:19: warning: Assigned value is
garbage or undefined [core.uninitialized.Assign]
info->start_soc = soc;
^ ~~~
soc is set by calling calc_soc.
But calc_soc can return without setting soc.
So check the return status and bail similarly to other
checks in pm860x_init_battery and initialize soc to
silence the warning.
Fixes: a830d28b48 ("power_supply: Enable battery-charger for 88pm860x")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42a2df3e82 ]
We have an upper bound on "maplevel" but forgot to check for negative
values.
Fixes: e114e47377 ("Smack: Simplified Mandatory Access Control Kernel")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3bca37d15 ]
Commit 1b79c52844 ("PCI: cadence: Add host driver for Cadence PCIe
controller") in order to update Vendor ID, directly wrote to
PCI_VENDOR_ID register. However PCI_VENDOR_ID in root port configuration
space is read-only register and writing to it will have no effect.
Use local management register to configure Vendor ID and Subsystem Vendor
ID.
Link: https://lore.kernel.org/r/20200722110317.4744-10-kishon@ti.com
Fixes: 1b79c52844 ("PCI: cadence: Add host driver for Cadence PCIe controller")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f3c66a3c7 ]
The MV88E6097 chip does not support configuring jumbo frames. Prior to
commit 5f4366660d only the 6352, 6351, 6165 and 6320 chips configured
jumbo mode. The refactor accidentally added the function for the 6097.
Remove the erroneous function pointer assignment.
Fixes: 5f4366660d ("net: dsa: mv88e6xxx: Refactor setting of jumbo frames")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9cf871518 ]
As per UAC2 spec (ch. 4.7.2), wTotalLength of AC Interface
Header Descriptor "includes the combined length of this
descriptor header and all Clock Source, Unit and Terminal
descriptors."
Thus add its size to its wTotalLength.
Also after recent changes wTotalLength is calculated
dynamically, update static definition of uac2_ac_header_descriptor
accordingly
Fixes: 132fcb4608 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33a06f1300 ]
When gadget registration fails, one should not call usb_del_gadget_udc().
Ensure this by setting gadget->udc to NULL. Also in case of a failure
there is no need to disable low-level hardware, so return immiedetly
instead of jumping to error_init label.
This fixes the following kernel NULL ptr dereference on gadget failure
(can be easily triggered with g_mass_storage without any module
parameters):
dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1
dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024
dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
no file given for LUN0
g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000104
pgd = (ptrval)
[00000104] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.8.0-rc5 #3133
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
PC is at usb_del_gadget_udc+0x38/0xc4
LR is at __mutex_lock+0x31c/0xb18
...
Process kworker/0:1 (pid: 12, stack limit = 0x(ptrval))
Stack: (0xef121db0 to 0xef122000)
...
[<c076bf3c>] (usb_del_gadget_udc) from [<c0726bec>] (dwc2_hsotg_remove+0x10/0x20)
[<c0726bec>] (dwc2_hsotg_remove) from [<c0711208>] (dwc2_driver_probe+0x57c/0x69c)
[<c0711208>] (dwc2_driver_probe) from [<c06247c0>] (platform_drv_probe+0x6c/0xa4)
[<c06247c0>] (platform_drv_probe) from [<c0621df4>] (really_probe+0x200/0x48c)
[<c0621df4>] (really_probe) from [<c06221e8>] (driver_probe_device+0x78/0x1fc)
[<c06221e8>] (driver_probe_device) from [<c061fcd4>] (bus_for_each_drv+0x74/0xb8)
[<c061fcd4>] (bus_for_each_drv) from [<c0621b54>] (__device_attach+0xd4/0x16c)
[<c0621b54>] (__device_attach) from [<c0620c98>] (bus_probe_device+0x88/0x90)
[<c0620c98>] (bus_probe_device) from [<c06211b0>] (deferred_probe_work_func+0x3c/0xd0)
[<c06211b0>] (deferred_probe_work_func) from [<c0149280>] (process_one_work+0x234/0x7dc)
[<c0149280>] (process_one_work) from [<c014986c>] (worker_thread+0x44/0x51c)
[<c014986c>] (worker_thread) from [<c0150b1c>] (kthread+0x158/0x1a0)
[<c0150b1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20)
Exception stack(0xef121fb0 to 0xef121ff8)
...
---[ end trace 9724c2fc7cc9c982 ]---
While fixing this also fix the double call to dwc2_lowlevel_hw_disable()
if dr_mode is set to USB_DR_MODE_PERIPHERAL. In such case low-level
hardware is already disabled before calling usb_add_gadget_udc(). That
function correctly preserves low-level hardware state, there is no need
for the second unconditional dwc2_lowlevel_hw_disable() call.
Fixes: 207324a321 ("usb: dwc2: Postponed gadget registration to the udc class driver")
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8b9fc10f2 ]
if of_find_device_by_node() succeed, dwc3_octeon_device_init() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: 93e502b3c2 ("MIPS: OCTEON: Platform support for OCTEON III USB controller")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dea06cd64 ]
The mvneta hardware appears to lock up in various random ways when
repeatedly switching speeds between 1G and 2.5G, which involves
reprogramming the COMPHY. It is not entirely clear why this happens,
but best guess is that reprogramming the COMPHY glitches mvneta clocks
causing the hardware to fail. It seems that rebooting resolves the
failure, but not down/up cycling the interface alone.
Various other approaches have been tried, such as trying to cleanly
power down the COMPHY and then take it back through the power up
initialisation, but this does not seem to help.
It was finally noticed that u-boot's last step when configuring a
COMPHY for "SGMII" mode was to poke at a register described as
"GBE_CONFIGURATION_REG", which is undocumented in any external
documentation. All that we have is the fact that u-boot sets a bit
corresponding to the "SGMII" lane at the end of COMPHY initialisation.
Experimentation shows that if we clear this bit prior to changing the
speed, and then set it afterwards, mvneta does not suffer this problem
on the SolidRun Clearfog when switching speeds between 1G and 2.5G.
This problem was found while script-testing phylink.
This fix also requires the corresponding change to DT to be effective.
See "ARM: dts: armada-38x: fix NETA lockup when repeatedly switching
speeds".
Fixes: 14dc100b44 ("phy: armada38x: add common phy support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1jxtRj-0003Tz-CG@rmk-PC.armlinux.org.uk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9248c08c3f ]
Fix potential memory leak in mcu message handler on error condition.
Fixes: 0e6a29e477 ("mt76: mt7615: add support to read temperature from mcu")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c9450c053 ]
Compilation error:
arch/powerpc/perf/perf_regs.c:80:undefined reference to `.is_sier_available'
Currently is_sier_available() is part of core-book3s.c, which is added
to build based on CONFIG_PPC_PERF_CTRS.
A config with CONFIG_PERF_EVENTS and without CONFIG_PPC_PERF_CTRS will
have a build break because of missing is_sier_available().
In practice it only breaks when CONFIG_FSL_EMB_PERF_EVENT=n because
that also guards the usage of is_sier_available(). That only happens
with CONFIG_PPC_BOOK3E_64=y and CONFIG_FSL_SOC_BOOKE=n.
Patch adds is_sier_available() in asm/perf_event.h to fix the build
break for configs missing CONFIG_PPC_PERF_CTRS.
Fixes: 333804dc3b ("powerpc/perf: Update perf_regs structure to include SIER")
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add detail about CONFIG_FSL_SOC_BOOKE]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200614083604.302611-1-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1b6bed3b5 ]
The function quirks_param_set() takes as argument a const char* pointer
to the new value of the usbcore.quirks parameter. It then casts this
pointer to a non-const char* pointer and passes it to the strsep()
function, which overwrites the value.
Fix this by creating a copy of the value using kstrdup() and letting
that copy be written to by strsep().
Fixes: 027bd6cafd ("usb: core: Add "quirks" parameter for usbcore")
Signed-off-by: Kars Mulder <kerneldev@karsmulder.nl>
Link: https://lore.kernel.org/r/5ee2-5f048a00-21-618c5c00@230659773
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de37458f8c ]
The set-led command is eight bytes long and starts with a command byte
followed by six bytes of RGB data and ends with a byte encoding a
frequency (see iuu_led() and iuu_rgbf_fill_buffer()).
The led activity helpers had a few long-standing bugs which corrupted
the command packets by inserting a second command byte and thereby
offsetting the RGB data and dropping the frequency in non-xmas mode.
In xmas mode, a related off-by-one error left the frequency field
uninitialised.
Fixes: 60a8fc0171 ("USB: add iuu_phoenix driver")
Reported-by: George Spelvin <lkml@sdf.org>
Link: https://lore.kernel.org/r/20200716085056.31471-1-johan@kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba3548cf29 ]
The lantiq-ssc driver uses internally an own workqueue to wait till the
data is not only written out of the FIFO but really written to the wire.
This workqueue is flushed while the SPI subsystem is working in some
other system workqueue.
The system workqueue is marked as WQ_MEM_RECLAIM, but the workqueue in
the lantiq-ssc driver does not use WQ_MEM_RECLAIM for now. Add this flag
too to prevent this warning.
This fixes the following warning:
[ 2.975956] WARNING: CPU: 1 PID: 17 at kernel/workqueue.c:2614 check_flush_dependency+0x168/0x184
[ 2.984752] workqueue: WQ_MEM_RECLAIM kblockd:blk_mq_run_work_fn is flushing !WQ_MEM_RECLAIM 1e100800.spi:0x0
Fixes: 891b7c5fbf ("mtd_blkdevs: convert to blk-mq")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20200717215648.20522-1-hauke@hauke-m.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bb58b987f ]
Add missing regulator_disable() as devm_action to avoid dedicated
unbind() callback and fix the missing error handling.
Fixes: fcbc51e54d ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba807c94f6 ]
Component driver structures allocated with devm_kmalloc() in bind() are
freed automatically after unbind(). Since the contained drm structures
are accessed afterwards in drm_mode_config_cleanup(), move the
allocation into probe() to extend the driver structure's lifetime to the
lifetime of the device. This should eventually be changed to use drm
resource managed allocations with lifetime of the drm device.
We also need to ensure that all componets are available during the
unbind() so we need to call component_unbind_all() before we free
non-devres resources like planes.
Note this patch fixes the the use after free bug but introduces a
possible boot loop issue. The issue is triggered if the HDMI support is
enabled and a component driver always return -EPROBE_DEFER, see
discussion [1] for more details.
[1] https://lkml.org/lkml/2020/3/24/1467
Fixes: 17b5001b51 ("imx-drm: convert to componentised device support")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[m.felsch@pengutronix: fix imx_tve_probe()]
[m.felsch@pengutronix: resort component_unbind_all())
[m.felsch@pengutronix: adapt commit message]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b0ad375c ]
If CONFIG_DEBUG_SHIRQ was enabled, r8a77951-salvator-xs could boot
correctly. If we appended "earlycon keep_bootcon" to the kernel
command like, we could get kernel log like below.
SError Interrupt on CPU0, code 0xbf000002 -- SError
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-salvator-x-00505-g6c843129e6faaf01 #785
Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
pstate: 60400085 (nZCv daIf +PAN -UAO BTYPE=--)
pc : rcar_gen3_phy_usb2_irq+0x14/0x54
lr : free_irq+0xf4/0x27c
This means free_irq() calls the interrupt handler while PM runtime
is not getting if DEBUG_SHIRQ is enabled and rcar_gen3_phy_usb2_probe()
failed. To fix the issue, move the irq registration place to
rcar_gen3_phy_usb2_init() which is ready to handle the interrupts.
Note that after the commit 549b6b55b0 ("phy: renesas: rcar-gen3-usb2:
enable/disable independent irqs") which is merged into v5.2, since this
driver creates multiple phy instances, needs to check whether one of
phy instances is initialized. However, if we backport this patch to v5.1
or less, we don't need to check it because such kernel have single
phy instance.
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 9f391c574e ("phy: rcar-gen3-usb2: add runtime ID/VBUS pin detection")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1594986297-12434-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4283950a9 ]
Currently the masking of ret with 0xff and followed by a right shift
of 8 bits always leaves a zero result. It appears the mask of 0xff
is incorrect and should be 0xff00, but I don't have the hardware to
test this. Fix this to mask the upper 8 bits before shifting.
[ Not tested ]
Addresses-Coverity: ("Operands don't affect result")
Fixes: 8fc8598e61 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200716154720.1710252-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ff8a616df ]
Ask the LSM to free its audit rule rather than directly calling kfree().
Both AppArmor and SELinux do additional work in their audit_rule_free()
hooks. Fix memory leaks by allowing the LSMs to perform necessary work.
Fixes: b169424551 ("ima: use the lsm policy update notifier")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Janne Karhunen <janne.karhunen@gmail.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f0b2a6093 ]
rxe_post_send_kernel() iterates over linked list of wr's, until the
wr->next ptr is NULL. However if we've got an interrupt after last wr is
posted, control may be returned to the code after send completion callback
is executed and wr memory is freed.
As a result, wr->next pointer may contain incorrect value leading to
panic. Store the wr->next on the stack before posting it.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200716190340.23453-1-m.malygin@yadro.com
Signed-off-by: Mikhail Malygin <m.malygin@yadro.com>
Signed-off-by: Sergey Kojushev <s.kojushev@yadro.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acca72e2b0 ]
QP's with the same SRQ, working on different CQs and running in parallel
on different CPUs could lead to a race when maintaining the SRQ consumer
count, and leads to FW running out of SRQs. Update the consumer
atomically. Make sure the wqe_prod is updated after the sge_prod due to
FW requirements.
Fixes: 3491c9e799 ("qedr: Add support for kernel mode SRQ's")
Link: https://lore.kernel.org/r/20200708195526.31040-1-ybason@marvell.com
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Basson <ybason@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9f675f950 ]
The code in vdso_cpu_init that exposes the cpu and numa node to
userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means
that any kernel running on a box with more than 4096 threads (NR_CPUS
advertises a limit of of 8192 cpus) would expose userspace to two cpu
contexts running at the same time with the same cpu number.
Note: I'm not aware of any distro shipping a kernel with support for more
than 4096 threads today, nor of any system image that currently exceeds
4096 threads. Found via code browsing.
Fixes: 18ad51dd34 ("powerpc: Add VDSO version of getcpu")
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200715233704.1352257-1-anton@ozlabs.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec2fc2a9e9 ]
Partition suspension, used for hibernation and migration, requires
that the OS place all but one of the LPAR's processor threads into one
of two states prior to calling the ibm,suspend-me RTAS function:
* the architected offline state (via RTAS stop-self); or
* the H_JOIN hcall, which does not return until the partition
resumes execution
Using H_CEDE as the offline mode, introduced by
commit 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU into
an appropriate offline state"), means that any threads which are
offline from Linux's point of view must be moved to one of those two
states before a partition suspension can proceed.
This was eventually addressed in commit 120496ac2d ("powerpc: Bring
all threads online prior to migration/hibernation"), which added code
to temporarily bring up any offline processor threads so they can call
H_JOIN. Conceptually this is fine, but the implementation has had
multiple races with cpu hotplug operations initiated from user
space[1][2][3], the error handling is fragile, and it generates
user-visible cpu hotplug events which is a lot of noise for a platform
feature that's supposed to minimize disruption to workloads.
With commit 3aa565f53c ("powerpc/pseries: Add hooks to put the CPU
into an appropriate offline state") reverted, this code becomes
unnecessary, so remove it. Since any offline CPUs now are truly
offline from the platform's point of view, it is no longer necessary
to bring up CPUs only to have them call H_JOIN and then go offline
again upon resuming. Only active threads are required to call H_JOIN;
stopped threads can be left alone.
[1] commit a6717c01dd ("powerpc/rtas: use device model APIs and
serialization during LPM")
[2] commit 9fb603050f ("powerpc/rtas: retry when cpu offline races
with suspend/migration")
[3] commit dfd718a2ed ("powerpc/rtas: Fix a potential race between
CPU-Offline & Migration")
Fixes: 120496ac2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612051238.1007764-3-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9991bb84b2 ]
When creating an FS_MODIFY event on inode itself (not on parent)
the file_name argument should be NULL.
The change to send a non NULL name to inode itself was done on purpuse
as part of another commit, as Tejun writes: "...While at it, supply the
target file name to fsnotify() from kernfs_node->name.".
But this is wrong practice and inconsistent with inotify behavior when
watching a single file. When a child is being watched (as opposed to the
parent directory) the inotify event should contain the watch descriptor,
but not the file name.
Fixes: df6a58c5c5 ("kernfs: don't depend on d_find_any_alias()...")
Link: https://lore.kernel.org/r/20200708111156.24659-5-amir73il@gmail.com
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 302a085c20 ]
Sometimes LED won't be turned off by LED_CORE_SUSPENDRESUME flag upon
system suspend.
led_set_brightness_nopm() uses schedule_work() to set LED brightness.
However, there's no guarantee that the scheduled work gets executed
because no one flushes the work.
So flush the scheduled work to make sure LED gets turned off.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Fixes: 81fe8e5b73 ("leds: core: Add led_set_brightness_nosleep{nopm} functions")
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 079ad2fb4b ]
If kobject_del() is invoked by kobject_cleanup() to delete the
target kobject, it may cause its parent kobject to be freed
before invoking the target kobject's ->release() method, which
effectively means freeing the parent before dealing with the
child entirely.
That is confusing at best and it may also lead to functional
issues if the callers of kobject_cleanup() are not careful enough
about the order in which these calls are made, so avoid the
problem by making kobject_cleanup() drop the last reference to
the target kobject's parent at the end, after invoking the target
kobject's ->release() method.
[ rjw: Rewrite the subject and changelog, make kobject_cleanup()
drop the parent reference only when __kobject_del() has been
called. ]
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: 7589238a8c ("Revert "software node: Simplify software_node_release() function"")
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1908555.IiAGLGrh1Z@kreacher
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a7e32d054 ]
The pci_cfg_wait queue is used to prevent user-space config accesses to
devices while they are recovering from reset.
Previously we used these operations on pci_cfg_wait:
__add_wait_queue(&pci_cfg_wait, ...)
__remove_wait_queue(&pci_cfg_wait, ...)
wake_up_all(&pci_cfg_wait)
The wake_up acquires the wait queue lock, but the add and remove do not.
Originally these were all protected by the pci_lock, but cdcb33f982
("PCI: Avoid possible deadlock on pci_lock and p->pi_lock"), moved
wake_up_all() outside pci_lock, so it could race with add/remove
operations, which caused occasional kernel panics, e.g., during vfio-pci
hotplug/unplug testing:
Unable to handle kernel read from unreadable memory at virtual address ffff802dac469000
Resolve this by using wait_event() instead of __add_wait_queue() and
__remove_wait_queue(). The wait queue lock is held by both wait_event()
and wake_up_all(), so it provides mutual exclusion.
Fixes: cdcb33f982 ("PCI: Avoid possible deadlock on pci_lock and p->pi_lock")
Link: https://lore.kernel.org/linux-pci/79827f2f-9b43-4411-1376-b9063b67aee3@huawei.com/T/#u
Based-on: https://lore.kernel.org/linux-pci/20191210031527.40136-1-zhengxiang9@huawei.com/
Based-on-patch-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xiang Zheng <zhengxiang9@huawei.com>
Cc: Heyi Guo <guoheyi@huawei.com>
Cc: Biaoxiang Ye <yebiaoxiang@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c99274be8 ]
In the loopback tests, the following call trace occurs.
Call Trace:
__rxe_do_task+0x1a/0x30 [rdma_rxe]
rxe_qp_destroy+0x61/0xa0 [rdma_rxe]
rxe_destroy_qp+0x20/0x60 [rdma_rxe]
ib_destroy_qp_user+0xcc/0x220 [ib_core]
uverbs_free_qp+0x3c/0xc0 [ib_uverbs]
destroy_hw_idr_uobject+0x24/0x70 [ib_uverbs]
uverbs_destroy_uobject+0x43/0x1b0 [ib_uverbs]
uobj_destroy+0x41/0x70 [ib_uverbs]
__uobj_get_destroy+0x39/0x70 [ib_uverbs]
ib_uverbs_destroy_qp+0x88/0xc0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb9/0xf0 [ib_uverbs]
ib_uverbs_cmd_verbs+0xb16/0xc30 [ib_uverbs]
The root cause is that the actual RDMA connection is not created in the
loopback tests and the rxe_match_dgid will fail randomly.
To fix this call trace which appear in the loopback tests, skip check of
the dgid.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200630123605.446959-1-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83895227ab ]
Quota reservations are supposed to account for the blocks that might be
allocated due to a bmap btree split. Reflink doesn't do this, so fix
this to make the quota accounting more accurate before we start
rearranging things.
Fixes: 862bb360ef ("xfs: reflink extents from one file to another")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb0efe5063 ]
The data fork scrubber calls filemap_write_and_wait to flush dirty pages
and delalloc reservations out to disk prior to checking the data fork's
extent mappings. Unfortunately, this means that scrub can consume the
EIO/ENOSPC errors that would otherwise have stayed around in the address
space until (we hope) the writer application calls fsync to persist data
and collect errors. The end result is that programs that wrote to a
file might never see the error code and proceed as if nothing were
wrong.
xfs_scrub is not in a position to notify file writers about the
writeback failure, and it's only here to check metadata, not file
contents. Therefore, if writeback fails, we should stuff the error code
back into the address space so that an fsync by the writer application
can pick that up.
Fixes: 99d9d8d05d ("xfs: scrub inode block mappings")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f01dfb760 ]
Do not fail probing when device_init_wakeup fails.
device_init_wakeup fails when the device is already enabled as wakeup
device. Hence, the driver fails to probe the device if:
- The device has already been enabled for wakeup (by e.g. sysfs)
- The driver has been unloaded and is being loaded again.
This goal of the patch is to fix the above cases.
Overwhelming majority of the drivers do not check device_init_wakeup
return code.
Fixes: cd70de2d35 ("media: platform: Add ChromeOS EC CEC driver")
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18ffec7505 ]
fimc_md_get_pinctrl() misses a check for pinctrl_lookup_state().
Add the missed check to fix it.
Fixes: 4163851f7b ("[media] s5p-fimc: Use pinctrl API for camera ports configuration]")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2505a210fc ]
If fw_csr_string() returns -ENOENT, then "name" is uninitialized. So
then the "strlen(model_names[i]) <= name_len" is true because strlen()
is unsigned and -ENOENT is type promoted to a very high positive value.
Then the "strncmp(name, model_names[i], name_len)" uses uninitialized
data because "name" is uninitialized.
Fixes: 92374e886c ("[media] firedtv: drop obsolete backend abstraction")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0a5e4d7a5 ]
YangYuxi is reporting that connection reuse
is causing one-second delay when SYN hits
existing connection in TIME_WAIT state.
Such delay was added to give time to expire
both the IPVS connection and the corresponding
conntrack. This was considered a rare case
at that time but it is causing problem for
some environments such as Kubernetes.
As nf_conntrack_tcp_packet() can decide to
release the conntrack in TIME_WAIT state and
to replace it with a fresh NEW conntrack, we
can use this to allow rescheduling just by
tuning our check: if the conntrack is
confirmed we can not schedule it to different
real server and the one-second delay still
applies but if new conntrack was created,
we are free to select new real server without
any delays.
YangYuxi lists some of the problem reports:
- One second connection delay in masquerading mode:
https://marc.info/?t=151683118100004&r=1&w=2
- IPVS low throughput #70747
https://github.com/kubernetes/kubernetes/issues/70747
- Apache Bench can fill up ipvs service proxy in seconds #544https://github.com/cloudnativelabs/kube-router/issues/544
- Additional 1s latency in `host -> service IP -> pod`
https://github.com/kubernetes/kubernetes/issues/90854
Fixes: f719e3754e ("ipvs: drop first packet to redirect conntrack")
Co-developed-by: YangYuxi <yx.atom1@gmail.com>
Signed-off-by: YangYuxi <yx.atom1@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cb42c0265 ]
ib_unregister_device_queued() can only be used by drivers using the new
dealloc_device callback flow, and it has a safety WARN_ON to ensure
drivers are using it properly.
However, if unregister and register are raced there is a special
destruction path that maintains the uniform error handling semantic of
'caller does ib_dealloc_device() on failure'. This requires disabling the
dealloc_device callback which triggers the WARN_ON.
Instead of using NULL to disable the callback use a special function
pointer so the WARN_ON does not trigger.
Fixes: d0899892ed ("RDMA/device: Provide APIs from the core code to help unregistration")
Link: https://lore.kernel.org/r/0-v1-a36d512e0a99+762-syz_dealloc_driver_jgg@nvidia.com
Reported-by: syzbot+4088ed905e4ae2b0e13b@syzkaller.appspotmail.com
Suggested-by: Hillf Danton <hdanton@sina.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9358076642 ]
Commit bac8486116 ("iavf: Refactor the watchdog state machine") inverted
the logic for when to update statistics. Statistics should be updated when
no other commands are pending, instead they were only requested when a
command was processed. iavf_request_stats() would see a pending request
and not request statistics to be updated. This caused statistics to never
be updated; fix the logic.
Fixes: bac8486116 ("iavf: Refactor the watchdog state machine")
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ee78aff9d ]
There is an off-by-one bounds check on the index into arrays
table->mc_reg_address and table->mc_reg_table_entry[k].mc_data[j] that
can lead to reads and writes outside of arrays. Fix the bound checking
off-by-one error.
Addresses-Coverity: ("Out-of-bounds read/write")
Fixes: cc8dbbb4f6 ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4603a5b4a8 ]
mccic_register() forgets to cleanup the notifier in its error handler.
mccic_shutdown() also misses calling v4l2_async_notifier_cleanup().
Add the missed calls to fix them.
Fixes: 3eefe36cc0 ("media: marvell-ccic: use async notifier to get the sensor")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a55caf010 ]
CONFIG_DVB_USB_CXUSB_ANALOG is a 'bool' symbol with a dependency on the
tristate CONFIG_VIDEO_V4L2, which means it can be enabled as =y even
when its dependency is =m. This leads to a link failure:
drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_analog_init':
cxusb-analog.c:(.text+0x92): undefined reference to `v4l2_subdev_call_wrappers'
drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_register_analog':
cxusb-analog.c:(.text+0x466): undefined reference to `v4l2_device_register'
cxusb-analog.c:(.text+0x4c3): undefined reference to `v4l2_i2c_new_subdev'
cxusb-analog.c:(.text+0x4fb): undefined reference to `v4l2_subdev_call_wrappers'
...
Change the dependency only disallow the analog portion of the driver
in that configuration.
Fixes: e478d40540 ("media: cxusb: add analog mode support for Medion MD95700")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 985b1f596f ]
clang points out that doing arithmetic between diffent enums is usually
a mistake:
drivers/leds/leds-lm355x.c:167:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion]
reg_val = pdata->pin_tx2 | pdata->ntc_pin;
~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
drivers/leds/leds-lm355x.c:178:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion]
reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode;
~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
In this driver, it is intentional, so add a cast to hide the false-positive
warning. It appears to be the only instance of this warning at the moment.
Fixes: b98d13c725 ("leds: Add new LED driver for lm355x chips")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8794feaf6 ]
Since commit 65f037e8e9 ("drm/etnaviv: add support for slave interface
clock") the reg clock is enabled before the bus clock and we need to undo
its enablement on error.
Fixes: 65f037e8e9 ("drm/etnaviv: add support for slave interface clock")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df16c33a40 ]
IIO_CONCENTRATION together with INFO_RAW specifier is used for reporting
raw concentrations of pollutants. Raw value should be meaningless
before being properly scaled. Because of that description shouldn't
mention raw value unit whatsoever.
Fix this by rephrasing existing description so it follows conventions
used throughout IIO ABI docs.
Fixes: 8ff6b3bc94 ("iio: chemical: Add IIO_CONCENTRATION channel type")
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00eb0cb36f ]
Firmware for sd8997 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8997_combo_v4.bin.
This patch fixes mwifiex driver to load correct firmware file for sd8997.
Fixes: f0ef67485f ("Bluetooth: btmrvl: add sd8997 chipset support")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbec3af5f1 ]
Firmware for sd8977 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8977_combo_v2.bin.
This patch fixes mwifiex driver to load correct firmware file for sd8977.
Fixes: 8c57983bf7 ("Bluetooth: btmrvl: add support for sd8977 chipset")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e1fcac52a ]
Firmware for sd8997 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8997_combo_v4.bin.
This patch fixes mwifiex driver to load correct firmware file for sd8997.
Fixes: 6d85ef00d9 ("mwifiex: add support for 8997 chipset")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47fd3ee25e ]
Firmware for sd8977 chipset is distributed by Marvell package and also as
part of the linux-firmware repository in filename sdsd8977_combo_v2.bin.
This patch fixes mwifiex driver to load correct firmware file for sd8977.
Fixes: 1a0f547831 ("mwifiex: add support for sd8977 chipset")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a54ebae6d ]
ACPICA commit e17b28cfcc31918d0db9547b6b274b09c413eb70
Object reference counts are used as a part of ACPICA's garbage
collection mechanism. This mechanism keeps track of references to
heap-allocated structures such as the ACPI operand objects.
Recent server firmware has revealed that this reference count can
overflow on large servers that declare many field units under the
same operation_region. This occurs because each field unit declaration
will add a reference count to the source operation_region.
This change solves the reference count overflow for operation_regions
objects by preventing fieldunits from incrementing their
operation_region's reference count. Each operation_region's reference
count will not be changed by named objects declared under the Field
operator. During namespace deletion, the operation_region namespace
node will be deleted and each fieldunit will be deleted without
touching the deleted operation_region object.
Link: https://github.com/acpica/acpica/commit/e17b28cf
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 117f636ea6 ]
In register_cache_set(), c is pointer to struct cache_set, and ca is
pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this
registering cache has up to date version and other members, the in-
memory version and other members should be updated to the newer value.
But current implementation makes a cache set only has a single cache
device, so the above assumption works well except for a special case.
The execption is when a cache device new created and both ca->sb.seq and
c->sb.seq are 0, because the super block is never flushed out yet. In
the location for the following if() check,
2156 if (ca->sb.seq > c->sb.seq) {
2157 c->sb.version = ca->sb.version;
2158 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
2159 c->sb.flags = ca->sb.flags;
2160 c->sb.seq = ca->sb.seq;
2161 pr_debug("set version = %llu\n", c->sb.version);
2162 }
c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0,
the if() check will fail (because both values are 0), and the cache set
version, set_uuid, flags and seq won't be updated.
The above problem is hiden for current code, because the bucket size is
compatible among different super block version. And the next time when
running cache set again, ca->sb.seq will be larger than 0 and cache set
super block version will be updated properly.
But if the large bucket feature is enabled, sb->bucket_size is the low
16bits of the bucket size. For a power of 2 value, when the actual
bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then
read_super_common() will fail because the if() check to
is_power_of_2(sb->bucket_size) is false. This is how the long time
hidden bug is triggered.
This patch modifies the if() check to the following way,
2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
Then cache set's version, set_uuid, flags and seq will always be updated
corectly including for a new created cache device.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f678ce8cc3 ]
ddebug_describe_flags() currently fills a caller provided string buffer,
after testing its size (also passed) in a BUG_ON. Fix this by
replacing them with a known-big-enough string buffer wrapped in a
struct, and passing that instead.
Also simplify ddebug_describe_flags() flags parameter from a struct to
a member in that struct, and hoist the member deref up to the caller.
This makes the function reusable (soon) where flags are unpacked.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fc453d7de ]
GISB bus error kernel panics have been observed during S2 transition
tests on the 7271t platform. The errors are a result of the BDC
interrupt handler trying to access BDC register space after the
system's suspend callbacks have completed.
Adding a suspend hook to the BDC driver that halts the controller before
S2 entry thus preventing unwanted access to the BDC register space during
this transition.
Signed-off-by: Danesh Petigara <danesh.petigara@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a95bdfd220 ]
Multiple connects/disconnects can cause a crash on the second
disconnect. The driver had a problem where it would try to send
endpoint commands after it was disconnected which is not allowed
by the hardware. The fix is to only allow the endpoint commands
when the endpoint is connected. This will also fix issues that
showed up when using configfs to create gadgets.
Signed-off-by: Sasi Kumar <sasi.kumar@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2468c877da ]
Driver does not release memory for device on error handling paths in
net2280_probe() when gadget_release() is not registered yet.
The patch fixes the bug like in other similar drivers.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fbc9bb6ca ]
Fix up our comparison to better handle a potential (but largely
unlikely) wrap around.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3568186280 ]
Once channel's job is hung, it dumps the channel's state into KMSG before
tearing down the offending job. If multiple channels hang at once, then
they dump messages simultaneously, making the debug info unreadable, and
thus, useless. This patch adds mutex which allows only one channel to emit
debug messages at a time.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9018fd7f2a ]
On failure pcie_capability_read_dword() sets it's last parameter, val
to 0. However, with Patch 14/14, it is possible that val is set to ~0 on
failure. This would introduce a bug because (x & x) == (~0 & x).
This bug can be avoided without changing the function's behaviour if the
return value of pcie_capability_read_dword is checked to confirm success.
Check the return value of pcie_capability_read_dword() to ensure success.
Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200713175529.29715-3-refactormyself@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13bceda68f ]
Add device support for the new ASUS ROG Zephyrus G14 (GA401I) and
G15 (GA502I) series.
This is accomplished by two new quirk entries (one per each series),
as well as all current available G401I/G502I DMI_PRODUCT_NAMEs to match
the corresponding devices.
Signed-off-by: Armas Spann <zappel@retarded.farm>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9822ba2ead ]
Fix the compile error below:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c: In function 'smu_v11_0_init_microcode':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
22 | pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
| ^~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:176:3: note: in expansion of macro 'BUG'
176 | BUG();
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6eeb997ab5 ]
This driver may take a regular spinlock when a raw spinlock
(irq_desc->lock) is already taken which results in the following
lockdep splat:
=============================
[ BUG: Invalid wait context ]
5.7.0-rc7 #1 Not tainted
-----------------------------
swapper/0/0 is trying to lock:
ffffff800303b798 (&chip_data->lock){....}-{3:3}, at: mtk_sysirq_set_type+0x48/0xc0
other info that might help us debug this:
context-{5:5}
2 locks held by swapper/0/0:
#0: ffffff800302ee68 (&desc->request_mutex){....}-{4:4}, at: __setup_irq+0xc4/0x8a0
#1: ffffff800302ecf0 (&irq_desc_lock_class){....}-{2:2}, at: __setup_irq+0xe4/0x8a0
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc7 #1
Hardware name: Pumpkin MT8516 (DT)
Call trace:
dump_backtrace+0x0/0x180
show_stack+0x14/0x20
dump_stack+0xd0/0x118
__lock_acquire+0x8c8/0x2270
lock_acquire+0xf8/0x470
_raw_spin_lock_irqsave+0x50/0x78
mtk_sysirq_set_type+0x48/0xc0
__irq_set_trigger+0x58/0x170
__setup_irq+0x420/0x8a0
request_threaded_irq+0xd8/0x190
timer_of_init+0x1e8/0x2c4
mtk_gpt_init+0x5c/0x1dc
timer_probe+0x74/0xf4
time_init+0x14/0x44
start_kernel+0x394/0x4f0
Replace the spinlock_t with raw_spinlock_t to avoid this warning.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200615074445.3579-1-brgl@bgdev.pl
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba806f98f8 ]
Always use the PCI GART instead. We just have to many cases
where AGP still causes problems. This means a performance
regression for some GPUs, but also a bug fix for some others.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57c0bd517c ]
On targets where GMU is available, GMU takes over the ownership of GX GDSC
during its initialization. So, move the refcount-get on GX PD before we
initialize the GMU. This ensures that nobody can collapse the GX GDSC
once GMU owns the GX GDSC. This patch fixes some GMU OOB errors seen
during GPU wake up during a system resume.
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adc40a5179 ]
As commit ef6b75671b ("mmc: sdhci-cadence: send tune request twice to
work around errata") stated, this IP has an errata. This commit applies
the second workaround for the SD mode.
Due to the errata, it is not possible to use the hardware tuning provided
by SDHCI_HOST_CONTROL2.
Use the software-controlled tuning like the eMMC mode.
Set sdhci_host_ops::platform_execute_tuning instead of overriding
mmc_host_ops::execute_tuning.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20200720061141.172944-1-yamada.masahiro@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 659fb5f154 ]
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f29432417 ]
nouveau_debugfs_strap_peek() calls pm_runtime_get_sync() that
increments the reference count. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5d5a32ead ]
in etnaviv_gpu_submit, etnaviv_gpu_recover_hang, etnaviv_gpu_debugfs,
and etnaviv_gpu_init the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbe28fc3cb ]
hi3660-hikey960.dts:
Define a 'ports' node for 'adv7533: adv7533@39' and the
'adi,dsi-lanes' property to make it compliant with the adi,adv7533 DT
binding.
This fills the requirements to meet the binding requirements,
remote endpoints are not defined.
hi6220-hikey.dts:
Change property name s/pd-gpio/pd-gpios, gpio properties should be
plural. This is just a cosmetic change.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4254632dba ]
Similar to what we have for the legacy platform data, we need to
configure SWSUP_SIDLE and SWSUP_MSTANDBY quirks for usb_host_hs.
These are needed to drop the legacy platform data for usb_host_hs.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edcb3895a7 ]
neofb_probe() calls neo_scan_monitor() that can successfully allocate a
memory for info->monspecs.modedb and proceed to case 0x03. There it does
not free the memory and returns -1. neofb_probe() goes to label
err_scan_monitor, thus, it does not free this memory through calling
fb_destroy_modedb() as well. We can not go to label err_init_hw since
neo_scan_monitor() can fail during memory allocation. So, the patch frees
the memory directly for case 0x03.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630195451.18675-1-novikov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8d35898a7 ]
savagefb_probe() calls savage_init_fb_info() that can successfully
allocate memory for info->pixmap.addr but then fail when
fb_alloc_cmap() fails. savagefb_probe() goes to label failed_init and
does not free allocated memory. It is not valid to go to label
failed_mmio since savage_init_fb_info() can fail during memory
allocation as well. So, the patch free allocated memory on the error
handling path in savage_init_fb_info() itself.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619162136.9010-1-novikov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3347c8a079 ]
When building with LLVM_IAS=1 means using Clang's Integrated Assembly (IAS)
from LLVM/Clang >= v10.0.1-rc1+ instead of GNU/as from GNU/binutils
I see the following breakage in Debian/testing AMD64:
<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
^
arch/x86/crypto/aesni-intel_asm.S:1598:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_dec %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
^
arch/x86/crypto/aesni-intel_asm.S:1599:2: note: while in macro instantiation
GCM_ENC_DEC dec
^
<instantiation>:15:74: error: too many positional arguments
PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
^
arch/x86/crypto/aesni-intel_asm.S:1686:2: note: while in macro instantiation
GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp)
^
<instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix
GHASH_4_ENCRYPT_4_PARALLEL_enc %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc
^
arch/x86/crypto/aesni-intel_asm.S:1687:2: note: while in macro instantiation
GCM_ENC_DEC enc
Craig Topper suggested me in ClangBuiltLinux issue #1050:
> I think the "too many positional arguments" is because the parser isn't able
> to handle the trailing commas.
>
> The "unknown use of instruction mnemonic" is because the macro was named
> GHASH_4_ENCRYPT_4_PARALLEL_DEC but its being instantiated with
> GHASH_4_ENCRYPT_4_PARALLEL_dec I guess gas ignores case on the
> macro instantiation, but llvm doesn't.
First, I removed the trailing comma in the PRECOMPUTE line.
Second, I substituted:
1. GHASH_4_ENCRYPT_4_PARALLEL_DEC -> GHASH_4_ENCRYPT_4_PARALLEL_dec
2. GHASH_4_ENCRYPT_4_PARALLEL_ENC -> GHASH_4_ENCRYPT_4_PARALLEL_enc
With these changes I was able to build with LLVM_IAS=1 and boot on bare metal.
I confirmed that this works with Linux-kernel v5.7.5 final.
NOTE: This patch is on top of Linux v5.7 final.
Thanks to Craig and especially Nick for double-checking and his comments.
Suggested-by: Craig Topper <craig.topper@intel.com>
Suggested-by: Craig Topper <craig.topper@gmail.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: "ClangBuiltLinux" <clang-built-linux@googlegroups.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1050
Link: https://bugs.llvm.org/show_bug.cgi?id=24494
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fb1067101 ]
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 200f933772 ]
Be pedantic on removal as well and hold the mutex.
This should prevent uses of addition while we exit.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbd6a42d89 ]
When nvme_round_robin_path() finds a valid namespace we should be using it;
falling back to __nvme_find_path() for non-optimized paths will cause the
result from nvme_round_robin_path() to be ignored for non-optimized paths.
Fixes: 75c10e7327 ("nvme-multipath: round-robin I/O policy")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f6e3246db ]
Handle the special case where we have exactly one optimized path,
which we should keep using in this case.
Fixes: 75c10e7327 ("nvme-multipath: round-robin I/O policy")
Signed off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f98772ba3 ]
commit fe35ec58f0 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue maps (which we have now for default/read/poll) is attempting to
freeze the queue. However we never started queue freeze when starting the
reset, which means that we have inflight pending requests that entered the
queue that we will not complete once the queue is quiesced.
So start a freeze before we quiesce the queue, and unfreeze the queue
after we successfully connected the I/O queues (and make sure to call
blk_mq_update_nr_hw_queues only after we are sure that the queue was
already frozen).
This follows to how the pci driver handles resets.
Fixes: fe35ec58f0 ("block: update hctx map when use multiple maps")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2875b0aeca ]
commit fe35ec58f0 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue maps (which we have now for default/read/poll) is attempting to
freeze the queue. However we never started queue freeze when starting the
reset, which means that we have inflight pending requests that entered the
queue that we will not complete once the queue is quiesced.
So start a freeze before we quiesce the queue, and unfreeze the queue
after we successfully connected the I/O queues (and make sure to call
blk_mq_update_nr_hw_queues only after we are sure that the queue was
already frozen).
This follows to how the pci driver handles resets.
Fixes: fe35ec58f0 ("block: update hctx map when use multiple maps")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a5a85972c ]
Pointer mddev is being dereferenced with a test_bit call before mddev
is being null checked, this may cause a null pointer dereference. Fix
this by moving the null pointer checks to sanity check mddev before
it is dereferenced.
Addresses-Coverity: ("Dereference before null check")
Fixes: 62f7b1989c ("md raid0/linear: Mark array as 'broken' and fail BIOs if a member is gone")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47e33c05f9 ]
When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced it had the wrong
direction flag set. While this isn't a big deal as nothing currently
enforces these bits in the kernel, it should be defined correctly. Fix
the define and provide support for the old command until it is no longer
needed for backward compatibility.
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ad7b4e8f8 ]
if of_find_device_by_node() succeed, socfpga_setup_ocram_self_refresh
doesn't have a corresponding put_device(). Thus add a jump target to
fix the exception handling for this function implementation.
Fixes: 44fd8c7d40 ("ARM: socfpga: support suspend to ram")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b36200f543 ]
rings_size() sets sq_offset to the total size of the rings (the returned
value which is used for memory allocation). This is wrong: sq array should
be located within the rings, not after them. Set sq_offset to where it
should be.
Fixes: 75b28affdd ("io_uring: allocate the two rings together")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hristo Venev <hristo@venev.name>
Cc: io-uring@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9177514ce3 ]
The change corrects registration and deregistration on error path
of a regulator, the problem was manifested by a reported memory
leak on deferred probe:
as3722-regulator as3722-regulator: regulator 13 register failed -517
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xecc43740 (size 64):
comm "swapper/0", pid 1, jiffies 4294937640 (age 712.880s)
hex dump (first 32 bytes):
72 65 67 75 6c 61 74 6f 72 2e 32 34 00 5a 5a 5a regulator.24.ZZZ
5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
backtrace:
[<0c4c3d1c>] __kmalloc_track_caller+0x15c/0x2c0
[<40c0ad48>] kvasprintf+0x64/0xd4
[<109abd29>] kvasprintf_const+0x70/0x84
[<c4215946>] kobject_set_name_vargs+0x34/0xa8
[<62282ea2>] dev_set_name+0x40/0x64
[<a39b6757>] regulator_register+0x3a4/0x1344
[<16a9543f>] devm_regulator_register+0x4c/0x84
[<51a4c6a1>] as3722_regulator_probe+0x294/0x754
...
The memory leak problem was introduced as a side ef another fix in
regulator_register() error path, I believe that the proper fix is
to decouple device_register() function into its two compounds and
initialize a struct device before assigning any values to its fields
and then using it before actual registration of a device happens.
This lets to call put_device() safely after initialization, and, since
now a release callback is called, kfree(rdev->constraints) shall be
removed to exclude a double free condition.
Fixes: a3cde9534e ("regulator: core: fix regulator_register() error paths to properly release rdev")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Cc: Wen Yang <wenyang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20200724005013.23278-1-vz@mleia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea0eada456 ]
Currently, if a section has a relocation to '_mcount' symbol, a new
__mcount_loc entry will be added whatever the relocation type is.
This is problematic when a relocation to '_mcount' is in the middle of a
section and is not a call for ftrace use.
Such relocation could be generated with below code for example:
bool is_mcount(unsigned long addr)
{
return (target == (unsigned long) &_mcount);
}
With this snippet of code, ftrace will try to patch the mcount location
generated by this code on module load and fail with:
Call trace:
ftrace_bug+0xa0/0x28c
ftrace_process_locs+0x2f4/0x430
ftrace_module_init+0x30/0x38
load_module+0x14f0/0x1e78
__do_sys_finit_module+0x100/0x11c
__arm64_sys_finit_module+0x28/0x34
el0_svc_common+0x88/0x194
el0_svc_handler+0x38/0x8c
el0_svc+0x8/0xc
---[ end trace d828d06b36ad9d59 ]---
ftrace failed to modify
[<ffffa2dbf3a3a41c>] 0xffffa2dbf3a3a41c
actual: 66:a9:3c:90
Initializing ftrace call sites
ftrace record flags: 2000000
(0)
expected tramp: ffffa2dc6cf66724
So Limit the relocation type to R_AARCH64_CALL26 as in perl version of
recordmcount.
Fixes: af64d2aa87 ("ftrace: Add arm64 support to recordmcount")
Signed-off-by: Gregory Herrero <gregory.herrero@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20200717143338.19302-1-gregory.herrero@oracle.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f3d176f5f ]
Require that the TCG_PCR_EVENT2.digests.count value strictly matches the
value of TCG_EfiSpecIdEvent.numberOfAlgorithms in the event field of the
TCG_PCClientPCREvent event log header. Also require that
TCG_EfiSpecIdEvent.numberOfAlgorithms is non-zero.
The TCG PC Client Platform Firmware Profile Specification section 9.1
(Family "2.0", Level 00 Revision 1.04) states:
For each Hash algorithm enumerated in the TCG_PCClientPCREvent entry,
there SHALL be a corresponding digest in all TCG_PCR_EVENT2 structures.
Note: This includes EV_NO_ACTION events which do not extend the PCR.
Section 9.4.5.1 provides this description of
TCG_EfiSpecIdEvent.numberOfAlgorithms:
The number of Hash algorithms in the digestSizes field. This field MUST
be set to a value of 0x01 or greater.
Enforce these restrictions, as required by the above specification, in
order to better identify and ignore invalid sequences of bytes at the
end of an otherwise valid TPM2 event log. Firmware doesn't always have
the means necessary to inform the kernel of the actual event log size so
the kernel's event log parsing code should be stringent when parsing the
event log for resiliency against firmware bugs. This is true, for
example, when firmware passes the event log to the kernel via a reserved
memory region described in device tree.
POWER and some ARM systems use the "linux,sml-base" and "linux,sml-size"
device tree properties to describe the memory region used to pass the
event log from firmware to the kernel. Unfortunately, the
"linux,sml-size" property describes the size of the entire reserved
memory region rather than the size of the event long within the memory
region and the event log format does not include information describing
the size of the event log.
tpm_read_log_of(), in drivers/char/tpm/eventlog/of.c, is where the
"linux,sml-size" property is used. At the end of that function,
log->bios_event_log_end is pointing at the end of the reserved memory
region. That's typically 0x10000 bytes offset from "linux,sml-base",
depending on what's defined in the device tree source.
The firmware event log only fills a portion of those 0x10000 bytes and
the rest of the memory region should be zeroed out by firmware. Even in
the case of a properly zeroed bytes in the remainder of the memory
region, the only thing allowing the kernel's event log parser to detect
the end of the event log is the following conditional in
__calc_tpm2_event_size():
if (event_type == 0 && event_field->event_size == 0)
size = 0;
If that wasn't there, __calc_tpm2_event_size() would think that a 16
byte sequence of zeroes, following an otherwise valid event log, was
a valid event.
However, problems can occur if a single bit is set in the offset
corresponding to either the TCG_PCR_EVENT2.eventType or
TCG_PCR_EVENT2.eventSize fields, after the last valid event log entry.
This could confuse the parser into thinking that an additional entry is
present in the event log and exposing this invalid entry to userspace in
the /sys/kernel/security/tpm0/binary_bios_measurements file. Such
problems have been seen if firmware does not fully zero the memory
region upon a warm reboot.
This patch significantly raises the bar on how difficult it is for
stale/invalid memory to confuse the kernel's event log parser but
there's still, ultimately, a reliance on firmware to properly initialize
the remainder of the memory region reserved for the event log as the
parser cannot be expected to detect a stale but otherwise properly
formatted firmware event log entry.
Fixes: fd5c78694f ("tpm: fix handling of the TPM 2.0 event logs")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4dae01bf0 ]
The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns out to be slightly off compared to the real values.
The updated voltages are based on calculations of the feedback resistor
network, and verified down to three decimal places with a multi-meter.
Fixes: 6eeb4180d4 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-4-wens@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55b271af76 ]
The device tree currently only assigns the a supply for the first CPU
core, when in reality the regulator supply is shared by all four cores.
This might cause an issue if the implementation does not realize the
sharing of the supply.
Assign the same regulator supply to the remaining CPU cores to address
this.
Fixes: 6eeb4180d4 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-3-wens@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64dd4a5a7d ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: 332e081225 ("intel-vbtn: new driver for Intel Virtual Button")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71fbe886ce ]
In the function check_acpi_dev(), if it fails to create
platform device, the return value is ERR_PTR() or NULL.
Thus it must use IS_ERR_OR_NULL() to check return value.
Fixes: ecc83e52b2 ("intel-hid: new hid event driver for hotkeys")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcd2e0deae ]
Currently we are not initializing the scmi clock with discrete rates
correctly. We fetch the min_rate and max_rate value only for clocks with
ranges and ignore the ones with discrete rates. This will lead to wrong
initialization of rate range when clock supports discrete rate.
Fix this by using the first and the last rate in the sorted list of the
discrete clock rates while registering the clock.
Link: https://lore.kernel.org/r/20200709081705.46084-2-sudeep.holla@arm.com
Fixes: 6d6a1d82ea ("clk: add support for clocks provided by SCMI")
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reported-and-tested-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d81ae8aac8 ]
struct uclamp_rq was zeroed out entirely in assumption that in the first
call to uclamp_rq_inc() they'd be initialized correctly in accordance to
default settings.
But when next patch introduces a static key to skip
uclamp_rq_{inc,dec}() until userspace opts in to use uclamp, schedutil
will fail to perform any frequency changes because the
rq->uclamp[UCLAMP_MAX].value is zeroed at init and stays as such. Which
means all rqs are capped to 0 by default.
Fix it by making sure we do proper initialization at init without
relying on uclamp_rq_inc() doing it later.
Fixes: 69842cba9a ("sched/uclamp: Add CPU's clamp buckets refcounting")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/20200630112123.12076-2-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b072714bfc ]
Once regulators are disabled after kernel boot, on Espresso board silent
hang observed because of LDO7 being disabled. LDO7 actually provide
power to CPU cores and non-cpu blocks circuitries. Keep this regulator
always-on to fix this hang.
Fixes: 9589f7721e ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso")
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0f1a30cf1 ]
When, at probe time, an SCMI communication failure inhibits the capacity
to query power domains states, such domains should be skipped.
Registering partially initialized SCMI power domains with genpd will
causes kernel panic.
arm-scmi timed out in resp(caller: scmi_power_state_get+0xa4/0xd0)
scmi-power-domain scmi_dev.2: failed to get state for domain 9
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000009f3691000
[0000000000000000] pgd=00000009f1ca0003, p4d=00000009f1ca0003, pud=00000009f35ea003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] PREEMPT SMP
CPU: 2 PID: 381 Comm: bash Not tainted 5.8.0-rc1-00011-gebd118c2cca8 #2
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Jan 3 2020
Internal error: Oops: 96000006 [#1] PREEMPT SMP
pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--)
pc : of_genpd_add_provider_onecell+0x98/0x1f8
lr : of_genpd_add_provider_onecell+0x48/0x1f8
Call trace:
of_genpd_add_provider_onecell+0x98/0x1f8
scmi_pm_domain_probe+0x174/0x1e8
scmi_dev_probe+0x90/0xe0
really_probe+0xe4/0x448
driver_probe_device+0xfc/0x168
device_driver_attach+0x7c/0x88
bind_store+0xe8/0x128
drv_attr_store+0x2c/0x40
sysfs_kf_write+0x4c/0x60
kernfs_fop_write+0x114/0x230
__vfs_write+0x24/0x50
vfs_write+0xbc/0x1e0
ksys_write+0x70/0xf8
__arm64_sys_write+0x24/0x30
el0_svc_common.constprop.3+0x94/0x160
do_el0_svc+0x2c/0x98
el0_sync_handler+0x148/0x1a8
el0_sync+0x158/0x180
Do not register any power domain that failed to be queried with genpd.
Fixes: 898216c97e ("firmware: arm_scmi: add device power domain support using genpd")
Link: https://lore.kernel.org/r/20200619220330.12217-1-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea9dd8f61c ]
Call exynos_cpu_power_up(cpunr) unconditionally. This is needed by the
big.LITTLE cpuidle driver and has no side-effects on other code paths.
The additional soft-reset call during little core power up has been added
to properly boot all cores on the Exynos5422-based boards with secure
firmware (like Odroid XU3/XU4 family). This however broke big.LITTLE
CPUidle driver, which worked only on boards without secure firmware (like
Peach-Pit/Pi Chromebooks). Apply the workaround only when board is
running under secure firmware.
Fixes: 833b5794e3 ("ARM: EXYNOS: reset Little cores when cpu is up")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bad8e64fb1 ]
On commit 6ac93117ab ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash, if you
happen to abuse blktrace while racing to remove / add a device.
We used to use asynchronous removal of the request_queue, and with that
the issue was easier to reproduce. Now that we have reverted to
synchronous removal of the request_queue, the issue is still possible to
reproduce, its however just a bit more difficult.
We essentially run two instances of break-blktrace which add/remove
a loop device, and setup a blktrace and just never tear the blktrace
down. We do this twice in parallel. This is easily reproduced with the
script run_0004.sh from break-blktrace [0].
We can end up with two types of panics each reflecting where we
race, one a failed blktrace setup:
[ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present!
[ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[ 252.436592] #PF: supervisor write access in kernel mode
[ 252.439822] #PF: error_code(0x0002) - not-present page
[ 252.442967] PGD 0 P4D 0
[ 252.444656] Oops: 0002 [#1] SMP NOPTI
[ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164
[ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[ 252.456343] RIP: 0010:down_write+0x15/0x40
[ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89
45 08 5d
[ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246
[ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000
[ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001
[ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000
[ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0
[ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000
[ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0
[ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 252.479866] Call Trace:
[ 252.480322] simple_recursive_removal+0x4e/0x2e0
[ 252.481078] ? debugfs_remove+0x60/0x60
[ 252.481725] ? relay_destroy_buf+0x77/0xb0
[ 252.482662] debugfs_remove+0x40/0x60
[ 252.483518] blk_remove_buf_file_callback+0x5/0x10
[ 252.484328] relay_close_buf+0x2e/0x60
[ 252.484930] relay_open+0x1ce/0x2c0
[ 252.485520] do_blk_trace_setup+0x14f/0x2b0
[ 252.486187] __blk_trace_setup+0x54/0xb0
[ 252.486803] blk_trace_ioctl+0x90/0x140
[ 252.487423] ? do_sys_openat2+0x1ab/0x2d0
[ 252.488053] blkdev_ioctl+0x4d/0x260
[ 252.488636] block_ioctl+0x39/0x40
[ 252.489139] ksys_ioctl+0x87/0xc0
[ 252.489675] __x64_sys_ioctl+0x16/0x20
[ 252.490380] do_syscall_64+0x52/0x180
[ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9
And the other on the device removal:
[ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present!
[ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[ 128.619537] #PF: supervisor write access in kernel mode
[ 128.622700] #PF: error_code(0x0002) - not-present page
[ 128.625842] PGD 0 P4D 0
[ 128.627585] Oops: 0002 [#1] SMP NOPTI
[ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164
[ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[ 128.640471] RIP: 0010:down_write+0x15/0x40
[ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89
45 08 5d
[ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246
[ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000
[ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0
[ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000
[ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0
[ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000
[ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0
[ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 128.667282] Call Trace:
[ 128.667801] simple_recursive_removal+0x4e/0x2e0
[ 128.668663] ? debugfs_remove+0x60/0x60
[ 128.669368] debugfs_remove+0x40/0x60
[ 128.669985] blk_trace_free+0xd/0x50
[ 128.670593] __blk_trace_remove+0x27/0x40
[ 128.671274] blk_trace_shutdown+0x30/0x40
[ 128.671935] blk_release_queue+0x95/0xf0
[ 128.672589] kobject_put+0xa5/0x1b0
[ 128.673188] disk_release+0xa2/0xc0
[ 128.673786] device_release+0x28/0x80
[ 128.674376] kobject_put+0xa5/0x1b0
[ 128.674915] loop_remove+0x39/0x50 [loop]
[ 128.675511] loop_control_ioctl+0x113/0x130 [loop]
[ 128.676199] ksys_ioctl+0x87/0xc0
[ 128.676708] __x64_sys_ioctl+0x16/0x20
[ 128.677274] do_syscall_64+0x52/0x180
[ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9
The common theme here is:
debugfs: Directory 'loop0' with parent 'block' already present
This crash happens because of how blktrace uses the debugfs directory
where it places its files. Upon init we always create the same directory
which would be needed by blktrace but we only do this for make_request
drivers (multiqueue) block drivers. When you race a removal of these
devices with a blktrace setup you end up in a situation where the
make_request recursive debugfs removal will sweep away the blktrace
files and then later blktrace will also try to remove individual
dentries which are already NULL. The inverse is also possible and hence
the two types of use after frees.
We don't create the block debugfs directory on init for these types of
block devices:
* request-based block driver block devices
* every possible partition
* scsi-generic
And so, this race should in theory only be possible with make_request
drivers.
We can fix the UAF by simply re-using the debugfs directory for
make_request drivers (multiqueue) and only creating the ephemeral
directory for the other type of block devices. The new clarifications
on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace
*prior* to processing a blktrace ensures the debugfs directories are
only created if no possible directory name clashes are possible.
This goes tested with:
o nvme partitions
o ISCSI with tgt, and blktracing against scsi-generic with:
o block
o tape
o cdrom
o media changer
o blktests
This patch is part of the work which disputes the severity of
CVE-2019-19770 which shows this issue is not a core debugfs issue, but
a misuse of debugfs within blktace.
Fixes: 6ac93117ab ("blktrace: use existing disk debugfs directory")
Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: yu kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b6a1a162d ]
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.
Change it to that instead.
Fixes: 143bb9ad85 ("arm64: dts: qcom: add audio pinctrls")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3906f64022 ]
The crypto notify call occurs with a read mutex held so you must
not do any substantial work directly. In particular, you cannot
call crypto_alloc_* as they may trigger further notifications
which may dead-lock in the presence of another writer.
This patch fixes this by postponing the work into a work queue and
taking the same lock in the module init function.
While we're at it this patch also ensures that all RCU accesses are
marked appropriately (tested with sparse).
Finally this also reveals a race condition in module param show
function as it may be called prior to the module init function.
It's fixed by testing whether crct10dif_tfm is NULL (this is true
iff the init function has not completed assuming fallback is false).
Fixes: 11dcb1037f ("crc-t10dif: Allow current transform to be...")
Fixes: b76377543b ("crc-t10dif: Pick better transform if one...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17ed808ad2 ]
When kobject_init_and_add() returns an error, it should be handled
because kobject_init_and_add() takes a reference even when it fails. If
this function returns an error, kobject_put() must be called to properly
clean up the memory associated with the object.
Therefore, replace calling kfree() and call kobject_put() and add a
missing kobject_put() in the edac_device_register_sysfs_main_kobj()
error path.
[ bp: Massage and merge into a single patch. ]
Fixes: b2ed215a33 ("Kobject: change drivers/edac to use kobject_init_and_add")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200528202238.18078-1-wu000273@umn.edu
Link: https://lkml.kernel.org/r/20200528203526.20908-1-wu000273@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a445086f8 ]
The puma gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
other Rockchip board.
Fixes: 2c66fc34e9 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20200603132836.362519-1-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a7184f6cf ]
The puma vcc5v0_host regulator node currently uses opposite active-values
for the enable pin. The gpio-declaration uses active-high while the
separate enable-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
gmac fix.
Fixes: 2c66fc34e9 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20200604091239.424318-1-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2300e6dab4 ]
The lion gmac node currently uses opposite active-values for the
gmac phy reset pin. The gpio-declaration uses active-high while the
separate snps,reset-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get
confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the
other Rockchip board.
Fixes: d99a02bcfa ("arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM")
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20200607212909.920575-1-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ea2f097b1 ]
With commit:
'b7031a02ec75 ("sched/fair: Add NOHZ_STATS_KICK")'
rebalance_domains of the local cfs_rq happens before others idle cpus have
updated nohz.next_balance and its value is overwritten.
Move the update of nohz.next_balance for other idles cpus before balancing
and updating the next_balance of local cfs_rq.
Also, the nohz.next_balance is now updated only if all idle cpus got a
chance to rebalance their domains and the idle balance has not been aborted
because of new activities on the CPU. In case of need_resched, the idle
load balance will be kick the next jiffie in order to address remaining
ilb.
Fixes: b7031a02ec ("sched/fair: Add NOHZ_STATS_KICK")
Reported-by: Peng Liu <iwtbavbm@gmail.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20200609123748.18636-1-vincent.guittot@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dad4e7fda4 ]
The current implementation always uses rpmh_write_async, which doesn't
wait for completion. That's fine for disable requests since there's no
immediate need for the clocks and they can be disabled in the
background. However, for enable requests we need to ensure the clocks
are actually enabled before returning to the client. Otherwise, clients
can end up accessing their HW before the necessary clocks are enabled,
which can lead to bus errors.
Use the synchronous version of this API (rpmh_write) for enable requests
in the active set to ensure completion.
Completion isn't required for sleep/wake sets, since they don't take
effect until after we enter sleep. All rpmh requests are automatically
flushed prior to entering sleep.
Fixes: 9c7e47025a ("clk: qcom: clk-rpmh: Add QCOM RPMh clock driver")
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lkml.kernel.org/r/20200215021232.1149-1-mdtipton@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[sboyd@kernel.org: Reorg code a bit for readability, rename to 'wait' to
make local variable not conflict with completion.h mechanism]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
the commit <a4d61e66ee4a> ("<io_uring: prevent re-read of sqe->opcode>")
caused another vulnerability. After io_get_req(), the sqe_submit struct
in req is not initialized, but the following code defaults that
req->submit.opcode is available.
Signed-off-by: Liu Yong <pkfxxxing@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4f57cace81 upstream.
Some devices, particularly the 3DConnexion Spacemouse wireless 3D
controllers, return more than just the battery capacity in the battery
report. The Spacemouse devices return an additional byte with a device
specific field. However, hidinput_query_battery_capacity() only
requests a 2 byte transfer.
When a spacemouse is connected via USB (direct wire, no wireless dongle)
and it returns a 3 byte report instead of the assumed 2 byte battery
report the larger transfer confuses and frightens the USB subsystem
which chooses to ignore the transfer. Then after 2 seconds assume the
device has stopped responding and reset it. This can be reproduced
easily by using a wired connection with a wireless spacemouse. The
Spacemouse will enter a loop of resetting every 2 seconds which can be
observed in dmesg.
This patch solves the problem by increasing the transfer request to 4
bytes instead of 2. The fix isn't particularly elegant, but it is simple
and safe to backport to stable kernels. A further patch will follow to
more elegantly handle battery reports that contain additional data.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Darren Hart <darren@dvhart.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Darren Hart <dvhart@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3751ad011 upstream.
__tracepoint_string's have their string data stored in .rodata, and an
address to that data stored in the "__tracepoint_str" section. Functions
that refer to those strings refer to the symbol of the address. Compiler
optimization can replace those address references with references
directly to the string data. If the address doesn't appear to have other
uses, then it appears dead to the compiler and is removed. This can
break the /tracing/printk_formats sysfs node which iterates the
addresses stored in the "__tracepoint_str" section.
Like other strings stored in custom sections in this header, mark these
__used to inform the compiler that there are other non-obvious users of
the address, so they should still be emitted.
Link: https://lkml.kernel.org/r/20200730224555.2142154-2-ndesaulniers@google.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 102c9323c3 ("tracing: Add __tracepoint_string() to export string pointers")
Reported-by: Tim Murray <timmurray@google.com>
Reported-by: Simon MacMullen <simonmacm@google.com>
Suggested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PiFace Digital is a convenient breakout board for the Microchip
mcp23s17 SPI GPIO port expander.
The first eight GPIOs 0..7 (bank A) are connected to eight output
terminals and LEDs, plus two relays on the first two outputs. These
output loads are active-high.
The next eight GPIOs 8..15 (bank B) are connected to eight input
terminals with four on-board switches connecting them to ground. Inputs
devices are therefore expected to bridge terminals to ground, so the
mcp23s17 pullups are activated for GPIO bank B.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
The active RV3028 settings are in RAM so after modifying the settings in
EEPROM the RAM should be refreshed so that they take effect.
Signed-off-by: Einar Vading <einar.vading@rhimagnesita.com>
Periodically the RV3028 refreshes registers from the EEPROM. When this
happens, some settings that have only been committed to registers are
lost. Change the handling of backup-switchover-mode and
trickle-resistor-ohms to write the EEPROM instead (if something has
changed), on the understanding that registers will be refreshed
afterwards.
See: https://github.com/raspberrypi/linux/issues/2912
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Adds an overlay for configuring all the GPIO expanders supported
by the driver under GPIO_PCA953X.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
start_streaming enabled the VPU component if ctx->component_enabled
was not set.
stop_streaming disabled the VPU component if both ports were
disabled. It didn't clear ctx->component_enabled.
If seeking, this meant that the component never got re-enabled,
and buffers never got processed afterwards.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
start_streaming passes a count of how many buffers have been queued
to videobuf2.
Allow this value to update the number of buffers the VPU allocates
on a port to avoid buffer recycling issues.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
The allocated input and output buffers are initialised in
buf_init and should only be cleared up in buf_cleanup.
stop_streaming was (incorrectly) cleaning up the buffers to
avoid an issue in videobuf2 that had been fixed by the orphaned
buffer support.
Remove the erroneous cleanup.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
The number assigned was arbitrary as one primary, one overlay,
and one cursor.
The number has to be below the DRM limit of 32 planes total,
and the current firmware API limit of 16 planes total.
Increase the number to 8 planes per crtc (1 primary,
6 overlay, and a cursor).
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
commit 2bbcaaee1f upstream.
In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.
The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0
Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Cc: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recent modification to vc4-kms-v3d-pi4 also results in a change
to the Pi 4 version of the upstream overlay.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
The firmware setting otg_mode=1 can be used to enable the onboard XHCI
controller in host mode, but that requires that the USB power domain
is enabled.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
commit 412055398b upstream.
svcrdma expects that the payload falls precisely into the xdr_buf
page vector. This does not seem to be the case for
nfsd4_encode_readv().
This code is called only when fops->splice_read is missing or when
RQ_SPLICE_OK is clear, so it's not a noticeable problem in many
common cases.
Add new transport method: ->xpo_read_payload so that when a READ
payload does not fit exactly in rq_res's page vector, the XDR
encoder can inform the RPC transport exactly where that payload is,
without the payload's XDR pad.
That way, when a Write chunk is present, the transport knows what
byte range in the Reply message is supposed to be matched with the
chunk.
Note that the Linux NFS server implementation of NFS/RDMA can
currently handle only one Write chunk per RPC-over-RDMA message.
This simplifies the implementation of this fix.
Fixes: b042098063 ("nfsd4: allow exotic read compounds")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198053
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 311aa6aafe upstream.
The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise="
modes - log, fix, enforce - at run time, but not when IMA architecture
specific policies are enabled. This prevents properly labeling the
filesystem on systems where secure boot is supported, but not enabled on the
platform. Only when secure boot is actually enabled should these IMA
appraise modes be disabled.
This patch removes the compile time dependency and makes it a runtime
decision, based on the secure boot state of that platform.
Test results as follows:
-> x86-64 with secure boot enabled
[ 0.015637] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix
[ 0.015668] ima: Secure boot enabled: ignoring ima_appraise=fix boot parameter option
-> powerpc with secure boot disabled
[ 0.000000] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix
[ 0.000000] Secure boot mode disabled
-> Running the system without secure boot and with both options set:
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_ARCH_POLICY=y
Audit prompts "missing-hash" but still allow execution and, consequently,
filesystem labeling:
type=INTEGRITY_DATA msg=audit(07/09/2020 12:30:27.778:1691) : pid=4976
uid=root auid=root ses=2
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 op=appraise_data
cause=missing-hash comm=bash name=/usr/bin/evmctl dev="dm-0" ino=493150
res=no
Cc: stable@vger.kernel.org
Fixes: d958083a8f ("x86/ima: define arch_get_ima_policy() for x86")
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Cc: stable@vger.kernel.org # 5.0
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 730e700e2c ]
For retransmitted packets, TCP needs to resort to using TCP timestamps
for computing RTT samples. In the common case where the data and ACK
fall in the same 1-millisecond interval, TCP senders with millisecond-
granularity TCP timestamps compute a ca_rtt_us of 0. This ca_rtt_us
of 0 propagates to rs->rtt_us.
This value of 0 can cause performance problems for congestion control
modules. For example, in BBR, the zero min_rtt sample can bring the
min_rtt and BDP estimate down to 0, reduce snd_cwnd and result in a
low throughput. It would be hard to mitigate this with filtering in
the congestion control module, because the proper floor to apply would
depend on the method of RTT sampling (using timestamp options or
internally-saved transmission timestamps).
This fix applies a floor of 1 for the RTT sample delta from TCP
timestamps, so that seq_rtt_us, ca_rtt_us, and rs->rtt_us will be at
least 1 * (USEC_PER_SEC / TCP_TS_HZ).
Note that the receiver RTT computation in tcp_rcv_rtt_measure() and
min_rtt computation in tcp_update_rtt_min() both already apply a floor
of 1 timestamp tick, so this commit makes the code more consistent in
avoiding this edge case of a value of 0.
Signed-off-by: Jianfeng Wang <jfwang@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Kevin Yang <yyd@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 16f6458f24 ]
The msg_zerocopy test pins the sender and receiver threads to separate
cores to reduce variance between runs.
But it hardcodes the cores and skips core 0, so it fails on machines
with the selected cores offline, or simply fewer cores.
The test mainly gives code coverage in automated runs. The throughput
of zerocopy ('-z') and non-zerocopy runs is logged for manual
inspection.
Continue even when sched_setaffinity fails. Just log to warn anyone
interpreting the data.
Fixes: 07b65c5b31 ("test: add msg_zerocopy test")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0dced17ad ]
This reverts commit 71130f2997.
In commit 71130f2997 ("vxlan: fix tos value before xmit") we want to
make sure the tos value are filtered by RT_TOS() based on RFC1349.
0 1 2 3 4 5 6 7
+-----+-----+-----+-----+-----+-----+-----+-----+
| PRECEDENCE | TOS | MBZ |
+-----+-----+-----+-----+-----+-----+-----+-----+
But RFC1349 has been obsoleted by RFC2474. The new DSCP field defined like
0 1 2 3 4 5 6 7
+-----+-----+-----+-----+-----+-----+-----+-----+
| DS FIELD, DSCP | ECN FIELD |
+-----+-----+-----+-----+-----+-----+-----+-----+
So with
IPTOS_TOS_MASK 0x1E
RT_TOS(tos) ((tos)&IPTOS_TOS_MASK)
the first 3 bits DSCP info will get lost.
To take all the DSCP info in xmit, we should revert the patch and just push
all tos bits to ip_tunnel_ecn_encap(), which will handling ECN field later.
Fixes: 71130f2997 ("vxlan: fix tos value before xmit")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9aba6c5b49 ]
ovs_ct_put_key() is potentially copying uninitialized kernel stack memory
into socket buffers, since the compiler may leave a 3-byte hole at the end
of `struct ovs_key_ct_tuple_ipv4` and `struct ovs_key_ct_tuple_ipv6`. Fix
it by initializing `orig` with memset().
Fixes: 9dd7f8907c ("openvswitch: Add original direction conntrack tuple to sw_flow_key.")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bab9693a9a ]
A dead lock was triggered on thunderx driver:
CPU0 CPU1
---- ----
[01] lock(&(&nic->rx_mode_wq_lock)->rlock);
[11] lock(&(&mc->mca_lock)->rlock);
[12] lock(&(&nic->rx_mode_wq_lock)->rlock);
[02] <Interrupt> lock(&(&mc->mca_lock)->rlock);
The path for each is:
[01] worker_thread() -> process_one_work() -> nicvf_set_rx_mode_task()
[02] mld_ifc_timer_expire()
[11] ipv6_add_dev() -> ipv6_dev_mc_inc() -> igmp6_group_added() ->
[12] dev_mc_add() -> __dev_set_rx_mode() -> nicvf_set_rx_mode()
To fix it, it needs to disable bh on [1], so that the timer on [2]
wouldn't be triggered until rx_mode_wq_lock is released. So change
to use spin_lock_bh() instead of spin_lock().
Thanks to Paolo for helping with this.
v1->v2:
- post to netdev.
Reported-by: Rafael P. <rparrazo@redhat.com>
Tested-by: Dean Nelson <dnelson@redhat.com>
Fixes: 469998c861 ("net: thunderx: prevent concurrent data re-writing by nicvf_set_rx_mode")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 622e32b7d4 ]
The GRE tunnel can be used to transport traffic that does not rely on a
Internet checksum (e.g. SCTP). The issue can be triggered creating a GRE
or GRETAP tunnel and transmitting SCTP traffic ontop of it where CRC
offload has been disabled. In order to fix the issue we need to
recompute the GRE csum in gre_gso_segment() not relying on the inner
checksum.
The issue is still present when we have the CRC offload enabled.
In this case we need to disable the CRC offload if we require GRE
checksum since otherwise skb_checksum() will report a wrong value.
Fixes: 90017accff ("sctp: Add GSO support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7c9864bbcc ]
If the accelerated networking SRIOV VF device has lost carrier
use the synthetic network device which is available as backup
path. This is a rare case since if VF link goes down, normally
the VMBus device will also loose external connectivity as well.
But if the communication is between two VM's on the same host
the VMBus device will still work.
Reported-by: "Shah, Ashish N" <ashish.n.shah@intel.com>
Fixes: 0c195567a8 ("netvsc: transparent VF management")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 02afa9c66b ]
Fix smatch warning:
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c:2419
alloc_channel() warn: passing zero to 'ERR_PTR'
setup_dpcon() should return ERR_PTR(err) instead of zero in error
handling case.
Fixes: d7f5a9d89a ("dpaa2-eth: defer probe on object allocate")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ea060b3526 ]
Drop the bogus endpoint-lookup helper which could end up accepting
interfaces based on endpoints belonging to unrelated altsettings.
Note that the returned bulk pipes and interrupt endpoint descriptor
were never actually used. Instead the bulk-endpoint numbers are
hardcoded to 1 and 2 (matching the specification), while the interrupt-
endpoint descriptor was assumed to be the third descriptor created by
USB core.
Try to bring some order to this by dropping the bogus lookup helper and
adding the missing endpoint sanity checks while keeping the interrupt-
descriptor assumption for now.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b5141915b5 ]
The commit cited below removed the RCU read-side critical section from
rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked
without RCU protection.
This results in the following warning [1] in the VXLAN driver, which
relied on the callback being invoked from an RCU read-side critical
section.
Fix this by calling rcu_read_lock() in the VXLAN driver, as already done
in the bridge driver.
[1]
WARNING: suspicious RCU usage
5.8.0-rc4-custom-01521-g481007553ce6 #29 Not tainted
-----------------------------
drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by bridge/166:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090
stack backtrace:
CPU: 1 PID: 166 Comm: bridge Not tainted 5.8.0-rc4-custom-01521-g481007553ce6 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x100/0x184
lockdep_rcu_suspicious+0x153/0x15d
vxlan_fdb_dump+0x51e/0x6d0
rtnl_fdb_dump+0x4dc/0xad0
netlink_dump+0x540/0x1090
__netlink_dump_start+0x695/0x950
rtnetlink_rcv_msg+0x802/0xbd0
netlink_rcv_skb+0x17a/0x480
rtnetlink_rcv+0x22/0x30
netlink_unicast+0x5ae/0x890
netlink_sendmsg+0x98a/0xf40
__sys_sendto+0x279/0x3b0
__x64_sys_sendto+0xe6/0x1a0
do_syscall_64+0x54/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fe14fa2ade0
Code: Bad RIP value.
RSP: 002b:00007fff75bb5b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00005614b1ba0020 RCX: 00007fe14fa2ade0
RDX: 000000000000011c RSI: 00007fff75bb5b90 RDI: 0000000000000003
RBP: 00007fff75bb5b90 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00005614b1b89160
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Fixes: 5e6d243587 ("bridge: netlink dump interface at par with brctl")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 65550098c1 ]
There's a race between rxrpc_sendmsg setting up a call, but then failing to
send anything on it due to an error, and recvmsg() seeing the call
completion occur and trying to return the state to the user.
An assertion fails in rxrpc_recvmsg() because the call has already been
released from the socket and is about to be released again as recvmsg deals
with it. (The recvmsg_q queue on the socket holds a ref, so there's no
problem with use-after-free.)
We also have to be careful not to end up reporting an error twice, in such
a way that both returns indicate to userspace that the user ID supplied
with the call is no longer in use - which could cause the client to
malfunction if it recycles the user ID fast enough.
Fix this by the following means:
(1) When sendmsg() creates a call after the point that the call has been
successfully added to the socket, don't return any errors through
sendmsg(), but rather complete the call and let recvmsg() retrieve
them. Make sendmsg() return 0 at this point. Further calls to
sendmsg() for that call will fail with ESHUTDOWN.
Note that at this point, we haven't send any packets yet, so the
server doesn't yet know about the call.
(2) If sendmsg() returns an error when it was expected to create a new
call, it means that the user ID wasn't used.
(3) Mark the call disconnected before marking it completed to prevent an
oops in rxrpc_release_call().
(4) recvmsg() will then retrieve the error and set MSG_EOR to indicate
that the user ID is no longer known by the kernel.
An oops like the following is produced:
kernel BUG at net/rxrpc/recvmsg.c:605!
...
RIP: 0010:rxrpc_recvmsg+0x256/0x5ae
...
Call Trace:
? __init_waitqueue_head+0x2f/0x2f
____sys_recvmsg+0x8a/0x148
? import_iovec+0x69/0x9c
? copy_msghdr_from_user+0x5c/0x86
___sys_recvmsg+0x72/0xaa
? __fget_files+0x22/0x57
? __fget_light+0x46/0x51
? fdget+0x9/0x1b
do_recvmmsg+0x15e/0x232
? _raw_spin_unlock+0xa/0xb
? vtime_delta+0xf/0x25
__x64_sys_recvmmsg+0x2c/0x2f
do_syscall_64+0x4c/0x78
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 357f5ef646 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()")
Reported-by: syzbot+b54969381df354936d96@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 555a893303 ]
in recent kernel versions there are warnings about incorrect MTU size
like these:
eth0: mtu greater than device maximum
mtk_soc_eth 1b100000.ethernet eth0: error -22 setting MTU to include DSA overhead
Fixes: bfcb813203 ("net: dsa: configure the MTU for switch ports")
Fixes: 72579e14a1 ("net: dsa: don't fail to probe if we couldn't set the MTU")
Fixes: 7a4c53bee3 ("net: report invalid mtu value via netlink extack")
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 706ec91916 ]
ip6_route_info_create() invokes nexthop_get(), which increases the
refcount of the "nh".
When ip6_route_info_create() returns, local variable "nh" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ip6_route_info_create(). When nexthops can not be used with source
routing, the function forgets to decrease the refcnt increased by
nexthop_get(), causing a refcnt leak.
Fix this issue by pulling up the error source routing handling when
nexthops can not be used with source routing.
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8c0de6e96c ]
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.
This bug can be easily reproduced with the following C program:
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
int main()
{
int s, value;
struct sockaddr_in6 addr;
struct ipv6_mreq m6;
s = socket(AF_INET6, SOCK_DGRAM, 0);
addr.sin6_family = AF_INET6;
addr.sin6_port = htons(5000);
inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr);
connect(s, (struct sockaddr *)&addr, sizeof(addr));
inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr);
m6.ipv6mr_interface = 5;
setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6));
value = AF_INET;
setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));
close(s);
return 0;
}
Reported-by: ch3332xr@gmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83f3522860 ]
fib_trie_unmerge() is called with RTNL held, but not from an RCU
read-side critical section. This leads to the following warning [1] when
the FIB alias list in a leaf is traversed with
hlist_for_each_entry_rcu().
Since the function is always called with RTNL held and since
modification of the list is protected by RTNL, simply use
hlist_for_each_entry() and silence the warning.
[1]
WARNING: suspicious RCU usage
5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted
-----------------------------
net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/164:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0
stack backtrace:
CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x100/0x184
lockdep_rcu_suspicious+0x153/0x15d
fib_trie_unmerge+0x608/0xdb0
fib_unmerge+0x44/0x360
fib4_rule_configure+0xc8/0xad0
fib_nl_newrule+0x37a/0x1dd0
rtnetlink_rcv_msg+0x4f7/0xbd0
netlink_rcv_skb+0x17a/0x480
rtnetlink_rcv+0x22/0x30
netlink_unicast+0x5ae/0x890
netlink_sendmsg+0x98a/0xf40
____sys_sendmsg+0x879/0xa00
___sys_sendmsg+0x122/0x190
__sys_sendmsg+0x103/0x1d0
__x64_sys_sendmsg+0x7d/0xb0
do_syscall_64+0x54/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fc80a234e97
Code: Bad RIP value.
RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97
RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003
RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000
R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020
Fixes: 0ddcf43d5d ("ipv4: FIB Local/MAIN table collapse")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7b856dfce upstream.
As reported in https://bugzilla.kernel.org/206217 , raw_violation_fixup
is causing more harm than good in some common use-cases.
This patch is a partial revert of commit:
191cd6fb5d ("PCI: tegra: Add SW fixup for RAW violations")
and fixes the following regression since then.
* Description:
When both the NIC and MMC are used one can see the following message:
NETDEV WATCHDOG: enp1s0 (r8169): transmit queue 0 timed out
and
pcieport 0000:00:02.0: AER: Uncorrected (Non-Fatal) error received: 0000:01:00.0
r8169 0000:01:00.0: AER: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
r8169 0000:01:00.0: AER: device [10ec:8168] error status/mask=00004000/00400000
r8169 0000:01:00.0: AER: [14] CmpltTO (First)
r8169 0000:01:00.0: AER: can't recover (no error_detected callback)
pcieport 0000:00:02.0: AER: device recovery failed
After that, the ethernet NIC is not functional anymore even after
reloading the r8169 module. After a reboot, this is reproducible by
copying a large file over the NIC to the MMC.
For some reason this is not reproducible when files are copied to a tmpfs.
* Little background on the fixup, by Manikanta Maddireddy:
"In the internal testing with dGPU on Tegra124, CmplTO is reported by
dGPU. This happened because FIFO queue in AFI(AXI to PCIe) module
get full by upstream posted writes. Back to back upstream writes
interleaved with infrequent reads, triggers RAW violation and CmpltTO.
This is fixed by reducing the posted write credits and by changing
updateFC timer frequency. These settings are fixed after stress test.
In the current case, RTL NIC is also reporting CmplTO. These settings
seems to be aggravating the issue instead of fixing it."
Link: https://lore.kernel.org/r/20200718100710.15398-1-kwizart@gmail.com
Fixes: 191cd6fb5d ("PCI: tegra: Add SW fixup for RAW violations")
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08b5d5014a upstream.
set/removexattr on an exported filesystem should break NFS delegations.
This is true in general, but also for the upcoming support for
RFC 8726 (NFSv4 extended attribute support). Make sure that they do.
Additionally, they need to grow a _locked variant, since callers might
call this with i_rwsem held (like the NFS server code).
Cc: stable@vger.kernel.org # v4.9+
Cc: linux-fsdevel@vger.kernel.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ddc9d357b9 ]
When a Linux hv_sock app tries to connect to a Service GUID on which no
host app is listening, a recent host (RS3+) sends a
CHANNELMSG_TL_CONNECT_RESULT (23) message to Linux and this triggers such
a warning:
unknown msgtype=23
WARNING: CPU: 2 PID: 0 at drivers/hv/vmbus_drv.c:1031 vmbus_on_msg_dpc
Actually Linux can safely ignore the message because the Linux app's
connect() will time out in 2 seconds: see VSOCK_DEFAULT_CONNECT_TIMEOUT
and vsock_stream_connect(). We don't bother to make use of the message
because: 1) it's only supported on recent hosts; 2) a non-trivial effort
is required to use the message in Linux, but the benefit is small.
So, let's not see the warning by silently ignoring the message.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e24c6447cc ]
I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:
Direct leak of 28 byte(s) in 4 object(s) allocated from:
#0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.
Free the token variable before calling read_token in order to plug the
leak.
Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51875dad43 ]
atmtcp_remove_persistent() invokes atm_dev_lookup(), which returns a
reference of atm_dev with increased refcount or NULL if fails.
The refcount leaks issues occur in two error handling paths. If
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL, the function
returns 0 without decreasing the refcount kept by a local variable,
resulting in refcount leaks.
Fix the issue by adding atm_dev_put() before returning 0 both when
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL.
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 024a8168b7 ]
We observed two panics involving races with igb_reset_task.
The first panic is caused by this race condition:
kworker reboot -f
igb_reset_task
igb_reinit_locked
igb_down
napi_synchronize
__igb_shutdown
igb_clear_interrupt_scheme
igb_free_q_vectors
igb_free_q_vector
adapter->q_vector[v_idx] = NULL;
napi_disable
Panics trying to access
adapter->q_vector[v_idx].napi_state
The second panic (a divide error) is caused by this race:
kworker reboot -f tx packet
igb_reset_task
__igb_shutdown
rtnl_lock()
...
igb_clear_interrupt_scheme
igb_free_q_vectors
adapter->num_tx_queues = 0
...
rtnl_unlock()
rtnl_lock()
igb_reinit_locked
igb_down
igb_up
netif_tx_start_all_queues
dev_hard_start_xmit
igb_xmit_frame
igb_tx_queue_mapping
Panics on
r_idx % adapter->num_tx_queues
This commit applies to igb_reset_task the same changes that
were applied to ixgbe in commit 2f90b8657e ("ixgbe: this patch
adds support for DCB to the kernel and ixgbe driver"),
commit 8f4c5c9fb8 ("ixgbe: reinit_locked() should be called with
rtnl_lock") and commit 88adce4ea8 ("ixgbe: fix possible race in
reset subtask").
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4052d3d2e8 ]
In the case where a vendor command does not implement doit, and has no
flags set, doit would not be validated and a NULL pointer dereference
would occur, for example when invoking the vendor command via iw.
I encountered this while developing new vendor commands. Perhaps in
practice it is advisable to always implement doit along with dumpit,
but it seems reasonable to me to always check doit anyway, not just
when NEED_WDEV.
Signed-off-by: Julian Squires <julian@cipht.net>
Link: https://lore.kernel.org/r/20200706211353.2366470-1-julian@cipht.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe3c606843 ]
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Callback function fw_cfg_sysfs_release_entry() in kobject_put()
can handle the pointer "entry" properly.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200613190533.15712-1-wu000273@umn.edu
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a1658bf92 ]
Recent kernels have been reported to panic using the bochs_drm
framebuffer under qemu-system-sparc64 which was bisected to
commit 7a0483ac4f ("drm/bochs: switch to generic drm fbdev emulation").
The backtrace indicates that the shadow framebuffer copy in
drm_fb_helper_dirty_blit_real() is trying to access the real
framebuffer using a virtual address rather than use an IO access
typically implemented using a physical (ASI_PHYS) access on SPARC.
The fix is to replace the memcpy with memcpy_toio() from io.h.
memcpy_toio() uses writeb() where the original fbdev code
used sbus_memcpy_toio(). The latter uses sbus_writeb().
The difference between writeb() and sbus_memcpy_toio() is
that writeb() writes bytes in little-endian, where sbus_writeb() writes
bytes in big-endian. As endian does not matter for byte writes they are
the same. So we can safely use memcpy_toio() here.
Note that this only fixes bochs, in general fbdev helpers still have
issues with mixing up system memory and __iomem space. Fixing that will
require a lot more work.
v3:
- Improved changelog (Daniel)
- Added FIXME to fbdev_use_iomem (Daniel)
v2:
- Added missing __iomem cast (kernel test robot)
- Made changelog readable and fix typos (Mark)
- Add flag to select iomem - and set it in the bochs driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200709193016.291267-1-sam@ravnborg.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200725191012.GA434957@ravnborg.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5611ec2b98 ]
After commit 6e02318eae ("nvme: add support for the Write Zeroes
command"), SK hynix PC400 becomes very slow with the following error
message:
[ 224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0]
SK Hynix PC400 has a buggy firmware that treats NLB as max value instead
of a range, so the NLB passed isn't a valid value to the firmware.
According to SK hynix there are three commands are affected:
- Write Zeroes
- Compare
- Write Uncorrectable
Right now only Write Zeroes is implemented, so disable it completely on
SK hynix PC400.
BugLink: https://bugs.launchpad.net/bugs/1872383
Cc: kyounghwan sohn <kyounghwan.sohn@sk.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eca21c2d86 upstream.
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 375446df95 ("leds: 88pm860x: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d584221e68 upstream.
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 50154e29e5 ("leds: lm3533: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f4aa35744 upstream.
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: eed16255d6 ("leds: da903x: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0972fff09 upstream.
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot use devres so that
deregistration ends up being tied to the parent device, something which
leads to use-after-free on driver unbind when the class device is
released while still being registered.
Fixes: 11e1bbc116 ("leds: lm36274: Introduce the TI LM36274 LED driver")
Cc: stable <stable@vger.kernel.org> # 5.3
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47a459ecc8 upstream.
Several MFD child drivers register their class devices directly under
the parent device. This means you cannot blindly do devres conversions
so that deregistration ends up being tied to the parent device,
something which leads to use-after-free on driver unbind when the class
device is released while still being registered.
Fixes: 8d3b6a4001 ("leds: wm831x-status: Use devm_led_classdev_register")
Cc: stable <stable@vger.kernel.org> # 4.6
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7e6b19bc7 upstream.
When doing a "write" ioctl call, properly check that we have permissions
to do so before copying anything from userspace or anything else so we
can "fail fast". This includes also covering the MEMWRITE ioctl which
previously missed checking for this.
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[rw: Fixed locking issue]
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebfdfeeae8 upstream.
vgacon_scrollback_update() always leaves enbough room in the scrollback
buffer for the next call, but if the console size changed that room
might not actually be enough, and so we need to re-check.
The check should be in the loop since vgacon_scrollback_cur->tail is
updated in the loop and count may be more than 1 when triggered by CSI M,
as Jiri's PoC:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <fcntl.h>
int main(int argc, char** argv)
{
int fd = open("/dev/tty1", O_RDWR);
unsigned short size[3] = {25, 200, 0};
ioctl(fd, 0x5609, size); // VT_RESIZE
write(fd, "\e[1;1H", 6);
for (int i = 0; i < 30; i++)
write(fd, "\e[10M", 5);
}
It leads to various crashes as vgacon_scrollback_update writes out of
the buffer:
BUG: unable to handle page fault for address: ffffc900001752a0
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:mutex_unlock+0x13/0x30
...
Call Trace:
n_tty_write+0x1a0/0x4d0
tty_write+0x1a0/0x2e0
Or to KASAN reports:
BUG: KASAN: slab-out-of-bounds in vgacon_scroll+0x57a/0x8ed
This fixes CVE-2020-14331.
Reported-by: 张云海 <zhangyunhai@nsfocus.com>
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Fixes: 15bdab959c ([PATCH] vgacon: Add support for soft scrollback)
Cc: stable@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Solar Designer <solar@openwall.com>
Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Yunhai Zhang <zhangyunhai@nsfocus.com>
Link: https://lore.kernel.org/r/9fb43895-ca91-9b07-ebfd-808cf854ca95@nsfocus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55c7549819 upstream.
When running `make coccicheck` in report mode using the
add_namespace.cocci file, it will fail for files that contain
MODULE_LICENSE. Those match the replacement precondition, but spatch
errors out as virtual.ns is not set.
In order to fix that, add the virtual rule nsdeps and only do search and
replace if that rule has been explicitly requested.
In order to make spatch happy in report mode, we also need a dummy rule,
as otherwise it errors out with "No rules apply". Using a script:python
rule appears unrelated and odd, but this is the shortest I could come up
with.
Adjust scripts/nsdeps accordingly to set the nsdeps rule when run trough
`make nsdeps`.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Fixes: c7c4e29fb5 ("scripts: add_namespace: Fix coccicheck failed")
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: jeyu@kernel.org
Cc: cocci@systeme.lip6.fr
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Maennich <maennich@google.com>
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/20200604164145.173925-1-maennich@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit beb4ee6770 upstream.
smk_write_relabel_self() frees memory from the task's credentials with
no locking, which can easily cause a use-after-free because multiple
tasks can share the same credentials structure.
Fix this by using prepare_creds() and commit_creds() to correctly modify
the task's credentials.
Reproducer for "BUG: KASAN: use-after-free in smk_write_relabel_self":
#include <fcntl.h>
#include <pthread.h>
#include <unistd.h>
static void *thrproc(void *arg)
{
int fd = open("/sys/fs/smackfs/relabel-self", O_WRONLY);
for (;;) write(fd, "foo", 3);
}
int main()
{
pthread_t t;
pthread_create(&t, NULL, thrproc, NULL);
thrproc(NULL);
}
Reported-by: syzbot+e6416dabb497a650da40@syzkaller.appspotmail.com
Fixes: 38416e5393 ("Smack: limited capability for changing process label")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b836a1426 upstream.
Binder is designed such that a binder_proc never has references to
itself. If this rule is violated, memory corruption can occur when a
process sends a transaction to itself; see e.g.
<https://syzkaller.appspot.com/bug?extid=09e05aba06723a94d43d>.
There is a remaining edgecase through which such a transaction-to-self
can still occur from the context of a task with BINDER_SET_CONTEXT_MGR
access:
- task A opens /dev/binder twice, creating binder_proc instances P1
and P2
- P1 becomes context manager
- P2 calls ACQUIRE on the magic handle 0, allocating index 0 in its
handle table
- P1 dies (by closing the /dev/binder fd and waiting a bit)
- P2 becomes context manager
- P2 calls ACQUIRE on the magic handle 0, allocating index 1 in its
handle table
[this triggers a warning: "binder: 1974:1974 tried to acquire
reference to desc 0, got 1 instead"]
- task B opens /dev/binder once, creating binder_proc instance P3
- P3 calls P2 (via magic handle 0) with (void*)1 as argument (two-way
transaction)
- P2 receives the handle and uses it to call P3 (two-way transaction)
- P3 calls P2 (via magic handle 0) (two-way transaction)
- P2 calls P2 (via handle 1) (two-way transaction)
And then, if P2 does *NOT* accept the incoming transaction work, but
instead closes the binder fd, we get a crash.
Solve it by preventing the context manager from using ACQUIRE on ref 0.
There shouldn't be any legitimate reason for the context manager to do
that.
Additionally, print a warning if someone manages to find another way to
trigger a transaction-to-self bug in the future.
Cc: stable@vger.kernel.org
Fixes: 457b9a6f09 ("Staging: android: add binder driver")
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Martijn Coenen <maco@android.com>
Link: https://lore.kernel.org/r/20200727120424.1627555-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e338d3c95 upstream.
syzbot report [1] describes a deadlock when write operation against an
ashmem fd executed at the time when ashmem is shrinking its cache results
in the following lock sequence:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&sb->s_type->i_mutex_key#13);
lock(fs_reclaim);
lock(&sb->s_type->i_mutex_key#13);
kswapd takes fs_reclaim and then inode_lock while generic_perform_write
takes inode_lock and then fs_reclaim. However ashmem does not support
writing into backing shmem with a write syscall. The only way to change
its content is to mmap it and operate on mapped memory. Therefore the race
that lockdep is warning about is not valid. Resolve this by introducing a
separate lockdep class for the backing shmem inodes.
[1]: https://lkml.kernel.org/lkml/0000000000000b5f9d059aa2037f@google.com/
Reported-by: syzbot+7a0d9d0b26efefe61780@syzkaller.appspotmail.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20200730192632.3088194-1-surenb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
when ctx->sqo_mm is zero, io_sq_wq_submit_work() frees 'req'
without deleting it from 'task_list'. After that, 'req' is
accessed in io_ring_ctx_wait_and_kill() which lead to
a use-after-free.
Signed-off-by: Guoyu Huang <hgy5945@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liu reports that he can trigger a NULL pointer dereference with
IORING_OP_SENDMSG, by changing the sqe->opcode after we've validated
that the previous opcode didn't need a file and didn't assign one.
Ensure we validate and read the opcode only once.
Reported-by: Liu Yong <pkfxxxing@gmail.com>
Tested-by: Liu Yong <pkfxxxing@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17a8271658 upstream.
In previous patches that added support for new iowarrior devices, the
handling of the report size was not done correct.
Fix that up and update the copyright date for the driver
Reworked from an original patch written by Christoph Jung.
Fixes: bab5417f5f ("USB: misc: iowarrior: add support for the 100 device")
Fixes: 5f6f8da2d7 ("USB: misc: iowarrior: add support for the 28 and 28L devices")
Fixes: 461d8deb26 ("USB: misc: iowarrior: add support for 2 OEMed devices")
Cc: stable <stable@kernel.org>
Reported-by: Christoph Jung <jung@codemercs.com>
Link: https://lore.kernel.org/r/20200726094939.1268978-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2a4309c1a upstream.
When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba
laptop, it changed product ID to 0x9062 when entering QDL mode:
usb 2-4: new high-speed USB device number 78 using xhci_hcd
usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: EM7305
usb 2-4: Manufacturer: Sierra Wireless, Incorporated
The upgrade could complete after running
# echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id
qcserial 2-4:1.0: Qualcomm USB modem converter detected
usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0
Signed-off-by: Erik Ekman <erik@kryo.se>
Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb0de3131f upstream.
The sockmap code currently ignores the value of attach_bpf_fd when
detaching a program. This is contrary to the usual behaviour of
checking that attach_bpf_fd represents the currently attached
program.
Ensure that attach_bpf_fd is indeed the currently attached
program. It turns out that all sockmap selftests already do this,
which indicates that this is unlikely to cause breakage.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-5-lmb@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f43cb0d672 upstream.
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour.
In the first case, the tests check that detaching without giving
a program succeeds. Since these are not the desired semantics,
invert the condition. In the second case, the clean up code doesn't
supply the necessary program fds.
Fixes: bb0de3131f ("bpf: sockmap: Require attach_bpf_fd when detaching a program")
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is used to fix ext4 direct I/O read error when
the read size is not aligned with block size.
Then, I will use a test to explain the error.
(1) Make a file that is not aligned with block size:
$dd if=/dev/zero of=./test.jar bs=1000 count=3
(2) I wrote a source file named "direct_io_read_file.c" as following:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/file.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <string.h>
#define BUF_SIZE 1024
int main()
{
int fd;
int ret;
unsigned char *buf;
ret = posix_memalign((void **)&buf, 512, BUF_SIZE);
if (ret) {
perror("posix_memalign failed");
exit(1);
}
fd = open("./test.jar", O_RDONLY | O_DIRECT, 0755);
if (fd < 0){
perror("open ./test.jar failed");
exit(1);
}
do {
ret = read(fd, buf, BUF_SIZE);
printf("ret=%d\n",ret);
if (ret < 0) {
perror("write test.jar failed");
}
} while (ret > 0);
free(buf);
close(fd);
}
(3) Compile the source file:
$gcc direct_io_read_file.c -D_GNU_SOURCE
(4) Run the test program:
$./a.out
The result is as following:
ret=1024
ret=1024
ret=952
ret=-1
write test.jar failed: Invalid argument.
I have tested this program on XFS filesystem, XFS does not have
this problem, because XFS use iomap_dio_rw() to do direct I/O
read. And the comparing between read offset and file size is done
in iomap_dio_rw(), the code is as following:
if (pos < size) {
retval = filemap_write_and_wait_range(mapping, pos,
pos + iov_length(iov, nr_segs) - 1);
if (!retval) {
retval = mapping->a_ops->direct_IO(READ, iocb,
iov, pos, nr_segs);
}
...
}
...only when "pos < size", direct I/O can be done, or 0 will be return.
I have tested the fix patch on Ext4, it is up to the mustard of
EINVAL in man2(read) as following:
#include <unistd.h>
ssize_t read(int fd, void *buf, size_t count);
EINVAL
fd is attached to an object which is unsuitable for reading;
or the file was opened with the O_DIRECT flag, and either the
address specified in buf, the value specified in count, or the
current file offset is not suitably aligned.
So I think this patch can be applied to fix ext4 direct I/O error.
However Ext4 introduces direct I/O read using iomap infrastructure
on kernel 5.5, the patch is commit <b1b4705d54ab>
("ext4: introduce direct I/O read using iomap infrastructure"),
then Ext4 will be the same as XFS, they all use iomap_dio_rw() to do direct
I/O read. So this problem does not exist on kernel 5.5 for Ext4.
>From above description, we can see this problem exists on all the kernel
versions between kernel 3.14 and kernel 5.4. It will cause the Applications
to fail to read. For example, when the search service downloads a new full
index file, the search engine is loading the previous index file and is
processing the search request, it can not use buffer io that may squeeze
the previous index file in use from pagecache, so the serch service must
use direct I/O read.
Please apply this patch on these kernel versions, or please use the method
on kernel 5.5 to fix this problem.
Fixes: 9fe55eea7e ("Fix race when checking i_size on direct i/o read")
Reviewed-by: Jan Kara <jack@suse.cz>
Co-developed-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Jiang Ying <jiangying8582@126.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the backport of f227e3ec3b ("random32: update the net random
state on interrupt and activity") and its associated fixes, the
arm64 build explodes early:
In file included from ../include/linux/smp.h:67,
from ../include/linux/percpu.h:7,
from ../include/linux/prandom.h:12,
from ../include/linux/random.h:118,
from ../arch/arm64/include/asm/pointer_auth.h:6,
from ../arch/arm64/include/asm/processor.h:39,
from ../include/linux/mutex.h:19,
from ../include/linux/kernfs.h:12,
from ../include/linux/sysfs.h:16,
from ../include/linux/kobject.h:20,
from ../include/linux/of.h:17,
from ../include/linux/irqdomain.h:35,
from ../include/linux/acpi.h:13,
from ../include/acpi/apei.h:9,
from ../include/acpi/ghes.h:5,
from ../include/linux/arm_sdei.h:8,
from ../arch/arm64/kernel/asm-offsets.c:10:
../arch/arm64/include/asm/smp.h:100:29: error: field ‘ptrauth_key’ has
incomplete type
This is due to struct ptrauth_keys_kernel not being defined before
we transitively include asm/smp.h from linux/random.h.
Paper over it by moving the inclusion of linux/random.h *after* the
type has been defined.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0842fbc1b upstream.
The addition of percpu.h to the list of includes in random.h revealed
some circular dependencies on arm64 and possibly other platforms. This
include was added solely for the pseudo-random definitions, which have
nothing to do with the rest of the definitions in this file but are
still there for legacy reasons.
This patch moves the pseudo-random parts to linux/prandom.h and the
percpu.h include with it, which is now guarded by _LINUX_PRANDOM_H and
protected against recursive inclusion.
A further cleanup step would be to remove this from <linux/random.h>
entirely, and make people who use the prandom infrastructure include
just the new header file. That's a bit of a churn patch, but grepping
for "prandom_" and "next_pseudo_random32" "struct rnd_state" should
catch most users.
But it turns out that that nice cleanup step is fairly painful, because
a _lot_ of code currently seems to depend on the implicit include of
<linux/random.h>, which can currently come in a lot of ways, including
such fairly core headfers as <linux/net.h>.
So the "nice cleanup" part may or may never happen.
Fixes: 1c9df907da ("random: fix circular include dependency on arm64 after addition of percpu.h")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83bdc7275e upstream.
It turns out that the plugin right now ends up being really unhappy
about the change from 'static' to 'extern' storage that happened in
commit f227e3ec3b ("random32: update the net random state on interrupt
and activity").
This is probably a trivial fix for the latent_entropy plugin, but for
now, just remove net_rand_state from the list of things the plugin
worries about.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c9df907da upstream.
Daniel Díaz and Kees Cook independently reported that commit
f227e3ec3b ("random32: update the net random state on interrupt and
activity") broke arm64 due to a circular dependency on include files
since the addition of percpu.h in random.h.
The correct fix would definitely be to move all the prandom32 stuff out
of random.h but for backporting, a smaller solution is preferred.
This one replaces linux/percpu.h with asm/percpu.h, and this fixes the
problem on x86_64, arm64, arm, and mips. Note that moving percpu.h
around didn't change anything and that removing it entirely broke
differently. When backporting, such options might still be considered
if this patch fails to help.
[ It turns out that an alternate fix seems to be to just remove the
troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h>
that causes the circular dependency.
But we might as well do the whole belt-and-suspenders thing, and
minimize inclusion in <linux/random.h> too. Either will fix the
problem, and both are good changes. - Linus ]
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Fixes: f227e3ec3b
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa54ea903a upstream.
Fix build error for the case:
defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)
config: keystone_defconfig
CC arch/arm/kernel/signal.o
In file included from ../include/linux/random.h:14,
from ../arch/arm/kernel/signal.c:8:
../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
: "Q" (*(const unsigned long *)current_stack_pointer));
^~~~~~~~~~~~~~~~~~~~~
user_stack_pointer
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f227e3ec3b upstream.
This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.
Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.
In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state. For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.
Reported-by: Amit Klein <aksecurity@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4d9b04b97 upstream.
Noticed with gcc 10 (fedora rawhide) that those variables were not being
declared as static, so end up with:
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/bench/perf-in.o] Error 1
Prefix those with bench__ and add them to bench/bench.h, so that we can
share those on the tools needing to access those variables from signal
handlers.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200303155811.GD13702@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebcb9464a2 upstream.
It is possible to return a pointer to a local variable when looking up
the architecture name for the running system and no normalization is
done on that value, i.e. we may end up returning the uts.machine local
variable.
While this doesn't happen on most arches, as normalization takes place,
lets fix this by making that a static variable and optimize it a bit by
not always running uname(), only the first time.
Noticed in fedora rawhide running with:
[perfbuilder@a5ff49d6e6e4 ~]$ gcc --version
gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8)
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cff20b3151 upstream.
To fix the build with newer gccs, that without this patch exit with:
LD /tmp/build/perf/tests/perf-in.o
ld: /tmp/build/perf/tests/bp_account.o:/git/perf/tools/perf/tests/bp_account.c:22: multiple definition of `the_var'; /tmp/build/perf/tests/bp_signal.o:/git/perf/tools/perf/tests/bp_signal.c:38: first defined here
make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/tests/perf-in.o] Error 1
First noticed in fedora:rawhide/32 with:
[perfbuilder@a5ff49d6e6e4 ~]$ gcc --version
gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8)
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdd6558959 upstream.
0day reported a possible circular locking dependency:
Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&port_lock_key);
lock(console_owner);
lock(&port_lock_key);
lock(&irq_desc_lock_class);
The reason for this is a printk() in the i8259 interrupt chip driver
which is invoked with the irq descriptor lock held, which reverses the
lock operations vs. printk() from arbitrary contexts.
Switch the printk() to printk_deferred() to avoid that.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87365abt2v.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b757b47a2f upstream.
If a stage-2 page-table contains an executable, read-only mapping at the
pte level (e.g. due to dirty logging being enabled), a subsequent write
fault to the same page which tries to install a larger block mapping
(e.g. due to dirty logging having been disabled) will erroneously inherit
the exec permission and consequently skip I-cache invalidation for the
rest of the block.
Ensure that exec permission is only inherited by write faults when the
new mapping is of the same size as the existing one. A subsequent
instruction abort will result in I-cache invalidation for the entire
block mapping.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Quentin Perret <qperret@google.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200723101714.15873-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8754e1379e ]
This patch fixed 2 issues with the usage of skb_cow in LAPB drivers
"lapbether" and "hdlc_x25":
1) After skb_cow fails, kfree_skb should be called to drop a reference
to the skb. But in both drivers, kfree_skb is not called.
2) skb_cow should be called before skb_push so that is can ensure the
safety of skb_push. But in "lapbether", it is incorrectly called after
skb_push.
More details about these 2 issues:
1) The behavior of calling kfree_skb on failure is also the behavior of
netif_rx, which is called by this function with "return netif_rx(skb);".
So this function should follow this behavior, too.
2) In "lapbether", skb_cow is called after skb_push. This results in 2
logical issues:
a) skb_push is not protected by skb_cow;
b) An extra headroom of 1 byte is ensured after skb_push. This extra
headroom has no use in this function. It also has no use in the
upper-layer function that this function passes the skb to
(x25_lapb_receive_frame in net/x25/x25_dev.c).
So logically skb_cow should instead be called before skb_push.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0d8aae645 ]
Currently, maximum number of mapper pages are set to the pfn calculated
from the memblock size of the memblock containing kernel. This will work
until that memblock spans the entire memory. However, it will be set to
a wrong value if there are multiple memblocks defined in kernel
(e.g. with efi runtime services).
Set the the maximum value to the pfn calculated from dram size.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2c6331064 ]
There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:
1. state = read bus state
2. if state is not "Closed":
3. request to set state to "Closing"
4. wait for state to be set to "Closing"
5. request to set state to "Closed"
6. wait for state to be set to "Closed"
If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".
Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.
Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6827d1abd ]
In the implementation of uld_send(), the skb is consumed on all
execution paths except one. Release skb when returning NET_XMIT_DROP.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 039a7a30ec ]
If a user task's stack is empty, or if it only has user regs, ORC
reports it as a reliable empty stack. But arch_stack_walk_reliable()
incorrectly treats it as unreliable.
That happens because the only success path for user tasks is inside the
loop, which only iterates on non-empty stacks. Generally, a user task
must end in a user regs frame, but an empty stack is an exception to
that rule.
Thanks to commit 71c9582528 ("x86/unwind/orc: Fix error handling in
__unwind_start()"), unwind_start() now sets state->error appropriately.
So now for both ORC and FP unwinders, unwind_done() and !unwind_error()
always means the end of the stack was successfully reached. So the
success path for kthreads is no longer needed -- it can also be used for
empty user tasks.
Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lkml.kernel.org/r/f136a4e5f019219cbc4f4da33b30c2f44fa65b84.1594994374.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0db9254d6b ]
This reverts commit d358def706.
There are two issues with "i2c: cadence: Fix the hold bit setting" commit.
1. In case of combined message request from user space, when the HOLD
bit is cleared in cdns_i2c_mrecv function, a STOP condition is sent
on the bus even before the last message is started. This is because when
the HOLD bit is cleared, the FIFOS are empty and there is no pending
transfer. The STOP condition should occur only after the last message
is completed.
2. The code added by the commit is redundant. Driver is handling the
setting/clearing of HOLD bit in right way before the commit.
The setting of HOLD bit based on 'bus_hold_flag' is taken care in
cdns_i2c_master_xfer function even before cdns_i2c_msend/cdns_i2c_recv
functions.
The clearing of HOLD bit is taken care at the end of cdns_i2c_msend and
cdns_i2c_recv functions based on bus_hold_flag and byte count.
Since clearing of HOLD bit is done after the slave address is written to
the register (writing to address register triggers the message transfer),
it is ensured that STOP condition occurs at the right time after
completion of the pending transfer (last message).
Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 015c5d5e6a ]
According to the report of [1], this driver is possible to cause
the following error in ravb_tx_timeout_work().
ravb e6800000.ethernet ethernet: failed to switch device to config mode
This error means that the hardware could not change the state
from "Operation" to "Configuration" while some tx and/or rx queue
are operating. After that, ravb_config() in ravb_dmac_init() will fail,
and then any descriptors will be not allocaled anymore so that NULL
pointer dereference happens after that on ravb_start_xmit().
To fix the issue, the ravb_tx_timeout_work() should check
the return values of ravb_stop_dma() and ravb_dmac_init().
If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX
and just exits. If ravb_dmac_init() fails, just exits.
[1]
https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@de.bosch.com/
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b344d6a83d ]
The kernel test bot reported[1] that using set_mask_bits on a u8 causes
the following issue on parisc:
hppa-linux-ld: drivers/phy/ti/phy-tusb1210.o: in function `tusb1210_probe':
>> (.text+0x2f4): undefined reference to `__cmpxchg_called_with_bad_pointer'
>> hppa-linux-ld: (.text+0x324): undefined reference to `__cmpxchg_called_with_bad_pointer'
hppa-linux-ld: (.text+0x354): undefined reference to `__cmpxchg_called_with_bad_pointer'
Add support for cmpxchg on u8 pointers.
[1] https://lore.kernel.org/patchwork/patch/1272617/#1468946
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Tested-by: Dave Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e8fd3a97f ]
The implementation of s3fwrn5_recv_frame() is supposed to consume skb on
all execution paths. Release skb before returning -ENODEV.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d61e21852 ]
This is likely firmware causing this but its starting to annoy customers.
Change the message level to verbose to prevent the spam.
Note that this seems to only show up with ISCSI enabled on the HBA via the
qedi driver.
Signed-off-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 651149f603 ]
During setup():
...
for ns in h0 r1 h1 h2 h3
do
create_ns ${ns}
done
...
while in cleanup():
...
for n in h1 r1 h2 h3 h4
do
ip netns del ${n} 2>/dev/null
done
...
and after removing the stderr redirection in cleanup():
$ sudo ./fib_nexthop_multiprefix.sh
...
TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ]
TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ]
Cannot remove namespace file "/run/netns/h4": No such file or directory
$ echo $?
1
and a non-zero return code, make kselftests fail (even if the test
itself is fine):
...
not ok 34 selftests: net: fib_nexthop_multiprefix.sh # exit=1
...
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0484010ec ]
On sparc32, tcflag_t is "unsigned long", unlike on all other
architectures, where it is "unsigned int":
drivers/net/usb/hso.c: In function ‘hso_serial_set_termios’:
include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 4 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=]
drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’
hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n",
^~~~~~~
include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 5 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=]
drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’
hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n",
^~~~~~~
As "unsigned long" is 32-bit on sparc32, fix this by casting all tcflag_t
parameters to "unsigned int".
While at it, use "%u" to format unsigned numbers.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd3c628f8f ]
When recording with cache-misses and arm_spe_x event, I found that it
will just fail without showing any error info if i put cache-misses
after 'arm_spe_x' event.
[root@localhost 0620]# perf record -e cache-misses \
-e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.067 MB perf.data ]
[root@localhost 0620]#
[root@localhost 0620]# perf record -e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ \
-e cache-misses sleep 1
[root@localhost 0620]#
The current code can only work if the only event to be traced is an
'arm_spe_x', or if it is the last event to be specified. Otherwise the
last event type will be checked against all the arm_spe_pmus[i]->types,
none will match and an out of bound 'i' index will be used in
arm_spe_recording_init().
We don't support concurrent multiple arm_spe_x events currently, that
is checked in arm_spe_recording_options(), and it will show the relevant
info. So add the check and record of the first found 'arm_spe_pmu' to
fix this issue here.
Fixes: ffd3d18c20 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support")
Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200724071111.35593-2-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e692139e6a ]
The function invokes bpf_prog_inc(), which increases the reference
count of a bpf_prog object "rq->xdp_prog" if the object isn't NULL.
The refcount leak issues take place in two error handling paths. When
either mlx5_wq_ll_create() or mlx5_wq_cyc_create() fails, the function
simply returns the error code and forgets to drop the reference count
increased earlier, causing a reference count leak of "rq->xdp_prog".
Fix this issue by jumping to the error handling path err_rq_wq_destroy
while either function fails.
Fixes: 422d4c401e ("net/mlx5e: RX, Split WQ objects for different RQ types")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85496a2922 ]
Fix the missing clk_disable_unprepare() before return
from gemini_ethernet_port_probe() in the error handling case.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 366228ed01 ]
If some processes in nixge_probe() fail, free_netdev(dev)
needs to be called to aviod a memory leak.
Fixes: 87ab207981 ("net: nixge: Separate ctrl and dma resources")
Fixes: abcd3d6fc6 ("net: nixge: Fix error path for obtaining mac address")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05fb3dbda1 ]
Although iph is expected to point to at least 20 bytes of valid memory,
ihl may be bogus, for example on reception of a corrupt packet. If it
happens to be less than 5, we really don't want to run away and
dereference 16GB worth of memory until it wraps back to exactly zero...
Fixes: 0e455d8e80 ("arm64: Implement optimised IP checksum helpers")
Reported-by: guodeqing <geffrey.guo@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27a2145d6f ]
RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ
error paths. Fix this and dispose of TX IRQ mappings correctly in
case of an error.
Fixes: ea22d51a78 ("ibmvnic: simplify and improve driver probe function")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d8e8f3433 ]
The lifetime of the Rx listener item ('rxl_item') is managed using RCU,
but is dereferenced outside of RCU read-side critical section, which can
lead to a use-after-free.
Fix this by increasing the scope of the RCU read-side critical section.
Fixes: 93c1edb27f ("mlxsw: Introduce Mellanox switch driver core")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1748f6a2cb ]
The rcu_dereference call in rht_ptr_rcu is completely bogus because
we've already dereferenced the value in __rht_ptr and operated on it.
This causes potential double readings which could be fatal. The RCU
dereference must occur prior to the comparison in __rht_ptr.
This patch changes the order of RCU dereference so that it is done
first and the result is then fed to __rht_ptr. The RCU marking
changes have been minimised using casts which will be removed in
a follow-up patch.
Fixes: ba6306e3f6 ("rhashtable: Remove RCU marking from...")
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d8e95fd6d ]
Add the missing endpoint sanity check to prevent a NULL-pointer
dereference should a malicious device lack the expected endpoints.
Note that the driver has a broken endpoint-lookup helper,
lan78xx_get_endpoints(), which can end up accepting interfaces in an
altsetting without endpoints as long as *some* altsetting has a bulk-in
and a bulk-out endpoint.
Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d0314b11c ]
When setting the PF interface up/down, notify the firmware to update
uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled.
This behavior will prevent sending traffic out on uplink port when PF is
down, such as sending traffic from a VF interface which is still up.
Currently when calling mlx5e_open/close(), the driver only sends PAOS
command to notify the firmware to set the physical port state to
up/down, however, it is not sufficient. When VF is in "auto" state, it
follows the uplink state, which was not updated on mlx5e_open/close()
before this patch.
When switchdev mode is enabled and uplink representor is first enabled,
set the uplink port state value back to its FW default "AUTO".
Fixes: 63bfd399de ("net/mlx5e: Send PAOS command on interface up/down")
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cd39b6e9a ]
On failure to attach the netdev, fix the rollback by re-setting the
device's state back to MLX5E_STATE_DESTROYING.
Failing to attach doesn't stop statistics polling via .ndo_get_stats64.
In this case, although the device is not attached, it falsely continues
to query the firmware for counters. Setting the device's state back to
MLX5E_STATE_DESTROYING prevents the firmware counters query.
Fixes: 26e59d8077 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b8e9c7c3f ]
When either esw_legacy_enable() or esw_offloads_enable() fails,
code missed to destroy the created TSAR.
Hence, add the missing call to destroy the TSAR.
Fixes: 610090ebce ("net/mlx5: E-switch, Initialize TSAR Qos hardware block before its user vports")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efe3fa45f7 ]
When user had created a FD rule, all the aRFS rules should be clear up.
HNS3 process flow as below:
1.get spin lock of fd_ruls_list
2.clear up all aRFS rules
3.release lock
4.get spin lock of fd_ruls_list
5.creat a rules
6.release lock;
There is a short period of time between step 3 and step 4, which would
creatting some new aRFS FD rules if driver was receiving packet.
So refactor the fd_rule_lock to fix it.
Fixes: 4412288757 ("net: hns3: refine the flow director handle")
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7e90ee596 ]
When the queue depth and queue parameters are modified, there is
a low probability that TX timeout occurs. The two operations cause
the link to be down or up when the watchdog is still working. All
queues are stopped when the link is down. After the carrier is on,
all queues are woken up. If the watchdog detects the link between
the carrier on and wakeup queues, a false TX timeout occurs.
So fix this issue by modifying the sequence of carrier on and queue
wakeup, which is symmetrical to the link down action.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04a8a3d0a7 ]
The slow path for traced system call entries accessed a wrong memory
location to get the number of the maximum allowed system call number.
Renumber the numbered "local" label for the correct location to avoid
collisions with actual local labels.
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Fixes: f3a8308864 ("sh: Add a few missing irqflags tracing markers.")
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7bcbc8ab9 ]
Geert reported that his SH7722-based Migo-R board failed to boot after
commit:
c5b27a889d ("sh/tlb: Convert SH to generic mmu_gather")
That commit fell victim to copying the wrong pattern --
__pmd_free_tlb() used to be implemented with pmd_free().
Fixes: c5b27a889d ("sh/tlb: Convert SH to generic mmu_gather")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4da96ffd3 ]
On powerpcle, int64_t maps to long long. Clang 9 threw:
warning: absolute value function 'labs' given an argument of type \
'long long' but has parameter of type 'long' which may cause \
truncation of value [-Wabsolute-value]
if (labs(tstop - texpect) > cfg_variance_us)
Tested: make -C tools/testing/selftests TARGETS="net" run_tests
Fixes: af5136f950 ("selftests/net: SO_TXTIME with ETF and FQ")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64f9ede227 ]
Clang 9 threw:
warning: format specifies type 'unsigned short' but the argument has \
type 'int' [-Wformat]
typeflags, PORT_BASE, PORT_BASE + port_off);
Tested: make -C tools/testing/selftests TARGETS="net" run_tests
Fixes: 77f65ebdca ("packet: packet fanout rollover during socket overload")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 955cbe91bc ]
The signedness of char is implementation-dependent. Some systems
(including PowerPC and ARM) use unsigned char. Clang 9 threw:
warning: result of comparison of constant -1 with expression of type \
'char' is always true [-Wtautological-constant-out-of-range-compare]
&arg_index)) != -1) {
Tested: make -C tools/testing/selftests TARGETS="net" run_tests
Fixes: 16e7812241 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adc99fd378 ]
If the controller died exactly when we are receiving icresp
we hang because icresp may never return. Make sure to set a
high finite limit.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09781ba039 ]
To support the change in "phy: armada-38x: fix NETA lockup when
repeatedly switching speeds" we need to update the DT with the
additional register.
Fixes: 14dc100b44 ("phy: armada38x: add common phy support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 101dde4207 ]
The commits "xfrm: Move dst->path into struct xfrm_dst"
and "net: Create and use new helper xfrm_dst_child()."
changed xfrm bundle handling under the assumption
that xdst->path and dst->child are not a NULL pointer
only if dst->xfrm is not a NULL pointer. That is true
with one exception. If the xfrm hold queue is used
to wait until a SA is installed by the key manager,
we create a dummy bundle without a valid dst->xfrm
pointer. The current xfrm bundle handling crashes
in that case. Fix this by extending the NULL check
of dst->xfrm with a test of the DST_XFRM_QUEUE flag.
Fixes: 0f6c480f23 ("xfrm: Move dst->path into struct xfrm_dst")
Fixes: b92cf4aab8 ("net: Create and use new helper xfrm_dst_child().")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92025b90f1 ]
The hardware codec on the A10, A10s, A13 and A20 needs buffer in the
first 256MB of RAM. This was solved by setting the CMA pool at a fixed
address in that range.
However, in recent kernels there's something else that comes in and
reserve some range that end up conflicting with our default pool
requirement, and thus makes its reservation fail.
The video codec will then use buffers from the usual default pool,
outside of the range it can access, and will fail to decode anything.
Since we're only concerned about that 256MB, we can however relax the
allocation to just specify the range that's allowed, and not try to
enforce a specific address.
Fixes: 5949bc5602 ("ARM: dts: sun4i-a10: Add Video Engine and reserved memory nodes")
Fixes: 9604320101 ("ARM: dts: sun5i: Add Video Engine and reserved memory nodes")
Fixes: c2a641a748 ("ARM: dts: sun7i-a20: Add Video Engine and reserved memory nodes")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200704130829.34297-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f47e8ab6a ]
In commit ed17b8d377 ("xfrm: fix a warning in xfrm_policy_insert_list"),
it would take 'priority' to make a policy unique, and allow duplicated
policies with different 'priority' to be added, which is not expected
by userland, as Tobias reported in strongswan.
To fix this duplicated policies issue, and also fix the issue in
commit ed17b8d377 ("xfrm: fix a warning in xfrm_policy_insert_list"),
when doing add/del/get/update on user interfaces, this patch is to change
to look up a policy with both mark and mask by doing:
mark.v == pol->mark.v && mark.m == pol->mark.m
and leave the check:
(mark & pol->mark.m) == pol->mark.v
for tx/rx path only.
As the userland expects an exact mark and mask match to manage policies.
v1->v2:
- make xfrm_policy_mark_match inline and fix the changelog as
Tobias suggested.
Fixes: 295fae5688 ("xfrm: Allow user space manipulation of SPD mark")
Fixes: ed17b8d377 ("xfrm: fix a warning in xfrm_policy_insert_list")
Reported-by: Tobias Brunner <tobias@strongswan.org>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4becb7ee5b upstream.
x25_connect() invokes x25_get_neigh(), which returns a reference of the
specified x25_neigh object to "x25->neighbour" with increased refcnt.
When x25 connect success and returns, the reference still be hold by
"x25->neighbour", so the refcount should be decreased in
x25_disconnect() to keep refcount balanced.
The reference counting issue happens in x25_disconnect(), which forgets
to decrease the refcnt increased by x25_get_neigh() in x25_connect(),
causing a refcnt leak.
Fix this issue by calling x25_neigh_put() before x25_disconnect()
returns.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbc8a99e95 upstream.
rds_notify_queue_get() is potentially copying uninitialized kernel stack
memory to userspace since the compiler may leave a 4-byte hole at the end
of `cmsg`.
In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which
unfortunately does not always initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org
Fixes: f037590fff ("rds: fix a leak of kernel memory")
Fixes: bdbe6fbc6a ("RDS: recv.c")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 900ab59e26 upstream.
The function mipi_dbi_spi1_transfer() will transfer its payload as 9-bit
data, the 9th (MSB) bit being the data/command bit. In order to do that,
it unpacks the 8-bit values into 16-bit values, then sets the 9th bit if
the byte corresponds to data, clears it otherwise. The 7 MSB are
padding. The array of now 16-bit values is then passed to the SPI core
for transfer.
This function was broken since its introduction, as the length of the
SPI transfer was set to the payload size before its conversion, but the
payload doubled in size due to the 8-bit -> 16-bit conversion.
Fixes: 02dd95fe31 ("drm/tinydrm: Add MIPI DBI support")
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703141341.1266263-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 543e8669ed upstream.
Compiler leaves a 4-byte hole near the end of `dev_info`, causing
amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace
when `size` is greater than 356.
In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which
unfortunately does not initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org
Fixes: c193fa91b9 ("drm/amdgpu: information leak in amdgpu_info_ioctl()")
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fde9f39ac7 upstream.
This patch fixes a race condition that causes a use-after-free during
amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits
are requested and the second one finishes before the first. Essentially,
this bug occurs when the following sequence of events happens:
1. Non-blocking commit #1 is requested w/ a new dm_state #1 and is
deferred to the workqueue.
2. Non-blocking commit #2 is requested w/ a new dm_state #2 and is
deferred to the workqueue.
3. Commit #2 starts before commit #1, dm_state #1 is used in the
commit_tail and commit #2 completes, freeing dm_state #1.
4. Commit #1 starts after commit #2 completes, uses the freed dm_state
1 and dereferences a freelist pointer while setting the context.
Since this bug has only been spotted with fast commits, this patch fixes
the bug by clearing the dm_state instead of using the old dc_state for
fast updates. In addition, since dm_state is only used for its dc_state
and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found,
removing the dm_state should not have any consequences in fast updates.
This use-after-free bug has existed for a while now, but only caused a
noticeable issue starting from 5.7-rc1 due to 3202fa62f ("slub: relocate
freelist pointer to middle of object") moving the freelist pointer from
dm_state->base (which was unused) to dm_state->context (which is
dereferenced).
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383
Fixes: bd200d190f ("drm/amd/display: Don't replace the dc_state for fast updates")
Reported-by: Duncan <1i5t5.duncan@cox.net>
Signed-off-by: Mazin Rezk <mnrzk@protonmail.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a601da92c upstream.
The current pin muxing scheme muxes GPIO_1 pad for USB_OTG_ID
because of which when card is inserted, usb otg is enumerated
and the card is never detected.
[ 64.492645] cfg80211: failed to load regulatory.db
[ 64.492657] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
[ 76.343711] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 76.349742] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 2
[ 76.388862] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 76.396650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 76.405412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 76.412763] usb usb2: Product: EHCI Host Controller
[ 76.417666] usb usb2: Manufacturer: Linux 5.8.0-rc1-next-20200618 ehci_hcd
[ 76.424623] usb usb2: SerialNumber: ci_hdrc.0
[ 76.431755] hub 2-0:1.0: USB hub found
[ 76.435862] hub 2-0:1.0: 1 port detected
The TRM mentions GPIO_1 pad should be muxed/assigned for card detect
and ENET_RX_ER pad for USB_OTG_ID for proper operation.
This patch fixes pin muxing as per TRM and is tested on a
i.Core 1.5 MX6 DL SOM.
[ 22.449165] mmc0: host does not support reading read-only switch, assuming write-enable
[ 22.459992] mmc0: new high speed SDHC card at address 0001
[ 22.469725] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[ 22.478856] mmcblk0: p1 p2
Fixes: 6df11287f7 ("ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eec13b42d4 upstream.
Unprivileged memory accesses generated by the so-called "translated"
instructions (e.g. LDRT) in kernel mode can cause user watchpoints to fire
unexpectedly. In such cases, the hw_breakpoint logic will invoke the user
overflow handler which will typically raise a SIGTRAP back to the current
task. This is futile when returning back to the kernel because (a) the
signal won't have been delivered and (b) userspace can't handle the thing
anyway.
Avoid invoking the user overflow handler for watchpoints triggered by
kernel uaccess routines, and instead single-step over the faulting
instruction as we would if no overflow handler had been installed.
Cc: <stable@vger.kernel.org>
Fixes: f81ef4a920 ("ARM: 6356/1: hw-breakpoint: add ARM backend for the hw-breakpoint framework")
Reported-by: Luis Machado <luis.machado@linaro.org>
Tested-by: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6989310f5d upstream.
Use offsetof to calculate offset of a field to take advantage of
compiler built-in version when possible, and avoid UBSAN warning when
compiling with Clang:
==================================================================
UBSAN: Undefined behaviour in net/wireless/wext-core.c:525:14
member access within null pointer of type 'struct iw_point'
CPU: 3 PID: 165 Comm: kworker/u16:3 Tainted: G S W 4.19.23 #43
Workqueue: cfg80211 __cfg80211_scan_done [cfg80211]
Call trace:
dump_backtrace+0x0/0x194
show_stack+0x20/0x2c
__dump_stack+0x20/0x28
dump_stack+0x70/0x94
ubsan_epilogue+0x14/0x44
ubsan_type_mismatch_common+0xf4/0xfc
__ubsan_handle_type_mismatch_v1+0x34/0x54
wireless_send_event+0x3cc/0x470
___cfg80211_scan_done+0x13c/0x220 [cfg80211]
__cfg80211_scan_done+0x28/0x34 [cfg80211]
process_one_work+0x170/0x35c
worker_thread+0x254/0x380
kthread+0x13c/0x158
ret_from_fork+0x10/0x18
===================================================================
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20191204081307.138765-1-pihsun@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54a485e9ec upstream.
The lookaside count is improperly initialized to the size of the
Receive Queue with the additional +1. In the traces below, the
RQ size is 384, so the count was set to 385.
The lookaside count is then rarely refreshed. Note the high and
incorrect count in the trace below:
rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c
qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385
rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1
The head,tail indicate there is only one RWQE posted although the count
says 385 and we correctly return the element 0.
The next call to rvt_get_rwqe with the decremented count:
rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c
qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384
rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1
Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1,
which is not valid because of the bogus high count.
Best case, the RWQE has never been posted and the rc logic sees an RWQE
that is too small (all zeros) and puts the QP into an error state.
In the worst case, a server slow at posting receive buffers might fool
rvt_get_rwqe() into fetching an old RWQE and corrupt memory.
Fix by deleting the faulty initialization code and creating an
inline to fetch the posted count and convert all callers to use
new inline.
Fixes: f592ae3c99 ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs")
Link: https://lore.kernel.org/r/20200728183848.22226.29132.stgit@awfm-01.aw.intel.com
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2c3657f0a upstream.
It's been reported that, when neither nouveau nor Nvidia graphics
driver is used, the screen starts flickering. And, after comparing
between the working case (stable 4.4.x) and the broken case, it turned
out that the problem comes from the audio component binding. The
Nvidia and AMD audio binding code clears the bus->keep_power flag
whenever snd_hdac_acomp_init() succeeds. But this doesn't mean that
the component is actually bound, but it merely indicates that it's
ready for binding. So, when both nouveau and Nvidia are blacklisted
or not ready, the driver keeps running without the audio component but
also with bus->keep_power = false. This made the driver runtime PM
kicked in and powering down when unused, which results in flickering
in the graphics side, as it seems.
For fixing the bug, this patch moves the bus->keep_power flag change
into generic_acomp_notifier_set() that is the function called from the
master_bind callback of component ops; i.e. it's guaranteed that the
binding succeeded.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208609
Fixes: 5a858e79c9 ("ALSA: hda - Disable audio component for legacy Nvidia HDMI codecs")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200728082033.23933-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b361663c5a upstream.
Recently ASPM handling was changed to allow ASPM on PCIe-to-PCI/PCI-X
bridges. Unfortunately the ASMedia ASM1083/1085 PCIe to PCI bridge device
doesn't seem to function properly with ASPM enabled. On an Asus PRIME
H270-PRO motherboard, it causes errors like these:
pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
pcieport 0000:00:1c.0: AER: device [8086:a292] error status/mask=00003000/00002000
pcieport 0000:00:1c.0: AER: [12] Timeout
pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
pcieport 0000:00:1c.0: AER: can't find device of ID00e0
In addition to flooding the kernel log, this also causes the machine to
wake up immediately after suspend is initiated.
The device advertises ASPM L0s and L1 support in the Link Capabilities
register, but the ASMedia web page for ASM1083 [1] claims "No PCIe ASPM
support".
Windows 10 (build 2004) enables L0s, but it also logs correctable PCIe
errors.
Add a quirk to disable ASPM for this device.
[1] https://www.asmedia.com.tw/eng/e_show_products.php?cate_index=169&item=114
[bhelgaas: commit log]
Fixes: 66ff14e59e ("PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208667
Link: https://lore.kernel.org/r/20200722021803.17958-1-hancockrwd@gmail.com
Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc78dc3b79 upstream.
For all data packets transmitted, host gets htt tx completion event. Some QCA9984
firmware releases support WMI_SERVICE_TX_DATA_ACK_RSSI, which gives data
ack rssi values to host through htt event of data tx completion. Data ack rssi
values are valid if A0 bit is set in HTT rx message. So enable the feature also
for QCA9884.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044
Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
[kvalo@codeaurora.org: improve commit log]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 128c664292 ]
Release all allocated memory if sha type is invalid:
In ccp_run_sha_cmd, if the type of sha is invalid, the allocated
hmac_buf should be released.
v2: fix the goto.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 40a904b1c2.
The patch is not wrong, but the Fixes: tag is. It should have been:
Fixes: 060ad66f97 ("dpaa_eth: change DMA device")
which means that it's fixing a commit which was introduced in:
git tag --contains 060ad66f97
v5.5
which then means it should have not been backported to linux-5.4.y,
where things _were_ working and now they're not.
Reported-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e976eb4b91 upstream.
After commit 00ee22c289 (PM / wakeup: Use seq_open() to show wakeup
stats), print_wakeup_source_stats(m, &deleted_ws) is not called from
wakeup_sources_stats_seq_show() any more.
Because deleted_ws is one of the wakeup sources, it should be shown
too, so add it to the end of all other wakeup sources.
Signed-off-by: zhuguangqing <zhuguangqing@xiaomi.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74edd08a4f upstream.
When executing the following command, we met kernel dump.
dmesg -c > /dev/null; cd /sys;
for i in `ls /sys/kernel/debug/regmap/* -d`; do
echo "Checking regmap in $i";
cat $i/registers;
done && grep -ri "0x02d0" *;
It is because the count value is too big, and kmalloc fails. So add an
upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit efc6b6f6c3 ]
Currently, SO_REUSEPORT does not work well if connected sockets are in a
UDP reuseport group.
Then reuseport_has_conns() returns true and the result of
reuseport_select_sock() is discarded. Also, unconnected sockets have the
same score, hence only does the first unconnected socket in udp_hslot
always receive all packets sent to unconnected sockets.
So, the result of reuseport_select_sock() should be used for load
balancing.
The noteworthy point is that the unconnected sockets placed after
connected sockets in sock_reuseport.socks will receive more packets than
others because of the algorithm in reuseport_select_sock().
index | connected | reciprocal_scale | result
---------------------------------------------
0 | no | 20% | 40%
1 | no | 20% | 20%
2 | yes | 20% | 0%
3 | no | 20% | 40%
4 | yes | 20% | 0%
If most of the sockets are connected, this can be a problem, but it still
works better than now.
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
CC: Willem de Bruijn <willemb@google.com>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f2b2c55e51 ]
If an unconnected socket in a UDP reuseport group connect()s, has_conns is
set to 1. Then, when a packet is received, udp[46]_lib_lookup2() scans all
sockets in udp_hslot looking for the connected socket with the highest
score.
However, when the number of sockets bound to the port exceeds max_socks,
reuseport_grow() resets has_conns to 0. It can cause udp[46]_lib_lookup2()
to return without scanning all sockets, resulting in that packets sent to
connected sockets may be distributed to unconnected sockets.
Therefore, reuseport_grow() should copy has_conns.
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
CC: Willem de Bruijn <willemb@google.com>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3ecdda3e9a ]
When adding a stream with stream reconf, the new stream firstly is in
CLOSED state but new out chunks can still be enqueued. Then once gets
the confirmation from the peer, the state will change to OPEN.
However, if the peer denies, it needs to roll back the stream. But when
doing that, it only sets the stream outcnt back, and the chunks already
in the new stream don't get purged. It caused these chunks can still be
dequeued in sctp_outq_dequeue_data().
As its stream is still in CLOSE, the chunk will be enqueued to the head
again by sctp_outq_head_data(). This chunk will never be sent out, and
the chunks after it can never be dequeued. The assoc will be 'hung' in
a dead loop of sending this chunk.
To fix it, this patch is to purge these chunks already in the new
stream by calling sctp_stream_shrink_out() when failing to do the
addstream reconf.
Fixes: 11ae76e67a ("sctp: implement receiver-side procedures for the Reconf Response Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8f13399db2 ]
It's not necessary to go list_for_each for outq->out_chunk_list
when new outcnt >= old outcnt, as no chunk with higher sid than
new (outcnt - 1) exists in the outqueue.
While at it, also move the list_for_each code in a new function
sctp_stream_shrink_out(), which will be used in the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17ad73e941 ]
We recently added some bounds checking in ax25_connect() and
ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because
they were no longer required.
Unfortunately, I believe they are required to prevent integer overflows
so I have added them back.
Fixes: 8885bb0621 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()")
Fixes: 2f2a7ffad5 ("AX.25: Fix out-of-bounds read in ax25_connect()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 76be93fc07 ]
Previously TLP may send multiple probes of new data in one
flight. This happens when the sender is cwnd limited. After the
initial TLP containing new data is sent, the sender receives another
ACK that acks partial inflight. It may re-arm another TLP timer
to send more, if no further ACK returns before the next TLP timeout
(PTO) expires. The sender may send in theory a large amount of TLP
until send queue is depleted. This only happens if the sender sees
such irregular uncommon ACK pattern. But it is generally undesirable
behavior during congestion especially.
The original TLP design restrict only one TLP probe per inflight as
published in "Reducing Web Latency: the Virtue of Gentle Aggression",
SIGCOMM 2013. This patch changes TLP to send at most one probe
per inflight.
Note that if the sender is app-limited, TLP retransmits old data
and did not have this issue.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 639f181f0e ]
rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if
rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read.
Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read
as this particular error doesn't get stored in ->sk_err by the networking
core.
Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive
errors (there's no way for it to report which call, if any, the error was
caused by).
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9bb5fbea59 ]
When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to
add a newline for easy reading.
root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout
0root@syzkaller:~#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8fdcabeac3 ]
This driver is not working because of problems of its receiving code.
This patch fixes it to make it work.
When the driver receives an LAPB frame, it should first pass the frame
to the LAPB module to process. After processing, the LAPB module passes
the data (the packet) back to the driver, the driver should then add a
one-byte pseudo header and pass the data to upper layers.
The changes to the "x25_asy_bump" function and the
"x25_asy_data_indication" function are to correctly implement this
procedure.
Also, the "x25_asy_unesc" function ignores any frame that is shorter
than 3 bytes. However the shortest frames are 2-byte long. So we need
to change it to allow 2-byte frames to pass.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Reviewed-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7df5cb75cf ]
IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.
Fixes: 145dd5f9c8 ("net: flush the softnet backlog in process context")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8885bb0621 ]
Checks on `addr_len` and `usax->sax25_ndigis` are insufficient.
ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7
or 8. Fix it.
It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f2a7ffad5 ]
Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient.
ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis`
equals to 7 or 8. Fix it.
This issue has been reported as a KMSAN uninit-value bug, because in such
a case, ax25_connect() reaches into the uninitialized portion of the
`struct sockaddr_storage` statically allocated in __sys_connect().
It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`.
Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af66
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bbcaaee1f upstream.
In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.
The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0
Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Cc: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5df96f2b9f upstream.
Commit adc0daad36 ("dm: report suspended
device during destroy") broke integrity recalculation.
The problem is dm_suspended() returns true not only during suspend,
but also during resume. So this race condition could occur:
1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work)
2. integrity_recalc (&ic->recalc_work) preempts the current thread
3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret;
4. integrity_recalc exits and no recalculating is done.
To fix this race condition, add a function dm_post_suspending that is
only true during the postsuspend phase and use it instead of
dm_suspended().
Signed-off-by: Mikulas Patocka <mpatocka redhat com>
Fixes: adc0daad36 ("dm: report suspended device during destroy")
Cc: stable vger kernel org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f0307df83 upstream.
When errors happens while loading graph components, the kernel oopses
while trying to remove all topology components. This can be
root-caused to a list pointing to memory that was already freed on
error.
remove_route() is already called on errors and will perform the
required cleanups so there's no need to free the route memory in
soc_tplg_dapm_graph_elems_load() if the route was added to the
list. We do however want to free the routes allocated but not added to
the list.
Fixes: 7df04ea7a3 ('ASoC: topology: modify dapm route loading routine and add dapm route unloading')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707203749.113883-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6aa06de77 upstream.
When building on allyesconfig kernel for a NO_DMA=y platform (e.g.
Sun-3), CONFIG_SND_SOC_QCOM_COMMON=y, but CONFIG_SND_SOC_QDSP6_AFE=n,
leading to a link failure:
sound/soc/qcom/common.o: In function `qcom_snd_parse_of':
common.c:(.text+0x2e2): undefined reference to `q6afe_is_rx_port'
While SND_SOC_QDSP6 depends on HAS_DMA, SND_SOC_MSM8996 and SND_SOC_SDM845
don't, so the following warning is seen:
WARNING: unmet direct dependencies detected for SND_SOC_QDSP6
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && HAS_DMA [=n]
Selected by [y]:
- SND_SOC_MSM8996 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y]
- SND_SOC_SDM845 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && CROS_EC [=y] && I2C [=y] && SOUNDWIRE [=y]
Until recently, this warning was harmless (from a compile-testing
point-of-view), but the new user of q6afe_is_rx_port() turned this into
a hard failure.
As the QDSP6 driver itself builds fine if NO_DMA=y, and it depends on
QCOM_APR (which in turns depends on ARCH_QCOM || COMPILE_TEST), it is
safe to increase compile testing coverage. Hence fix the link failure
by dropping the HAS_DMA dependency of SND_SOC_QDSP6.
Fixes: a212008925 ("ASoC: qcom: common: set correct directions for dailinks")
Fixes: 6b1687bf76 ("ASoC: qcom: add sdm845 sound card support")
Fixes: a6f933f63f ("ASoC: qcom: apq8096: Add db820c machine driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200629122443.21736-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85ca6b17e2 upstream.
The Lenovo Miix 2 10 has a keyboard dock with extra speakers in the dock.
Rather then the ACL5672's GPIO1 pin being used as IRQ to the CPU, it is
actually used to enable the amplifier for these speakers
(the IRQ to the CPU comes directly from the jack-detect switch).
Add a quirk for having an ext speaker-amplifier enable pin on GPIO1
and replace the Lenovo Miix 2 10's dmi_system_id table entry's wrong
GPIO_DEV quirk (which needs to be renamed to GPIO1_IS_IRQ) with the
new RT5670_GPIO1_IS_EXT_SPK_EN quirk, so that we enable the external
speaker-amplifier as necessary.
Also update the ident field for the dmi_system_id table entry, the
Miix models are not Thinkpads.
Fixes: 67e03ff3f3 ("ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723
Link: https://lore.kernel.org/r/20200628155231.71089-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de2b41be8f upstream.
On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is
page-aligned, but the end of the .bss..page_aligned section is not
guaranteed to be page-aligned.
As a result, objects from other .bss sections may end up on the same 4k
page as the idt_table, and will accidentially get mapped read-only during
boot, causing unexpected page-faults when the kernel writes to them.
This could be worked around by making the objects in the page aligned
sections page sized, but that's wrong.
Explicit sections which store only page aligned objects have an implicit
guarantee that the object is alone in the page in which it is placed. That
works for all objects except the last one. That's inconsistent.
Enforcing page sized objects for these sections would wreckage memory
sanitizers, because the object becomes artificially larger than it should
be and out of bound access becomes legit.
Align the end of the .bss..page_aligned and .data..page_aligned section on
page-size so all objects places in these sections are guaranteed to have
their own page.
[ tglx: Amended changelog ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be6577af0c upstream.
Stalls are quite frequent with recent kernels. I enabled
CONFIG_SOFTLOCKUP_DETECTOR and I caught the following stall:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [cc1:22803]
CPU: 0 PID: 22803 Comm: cc1 Not tainted 5.6.17+ #3
Hardware name: 9000/800/rp3440
IAOQ[0]: d_alloc_parallel+0x384/0x688
IAOQ[1]: d_alloc_parallel+0x388/0x688
RP(r2): d_alloc_parallel+0x134/0x688
Backtrace:
[<000000004036974c>] __lookup_slow+0xa4/0x200
[<0000000040369fc8>] walk_component+0x288/0x458
[<000000004036a9a0>] path_lookupat+0x88/0x198
[<000000004036e748>] filename_lookup+0xa0/0x168
[<000000004036e95c>] user_path_at_empty+0x64/0x80
[<000000004035d93c>] vfs_statx+0x104/0x158
[<000000004035dfcc>] __do_sys_lstat64+0x44/0x80
[<000000004035e5a0>] sys_lstat64+0x20/0x38
[<0000000040180054>] syscall_exit+0x0/0x14
The code was stuck in this loop in d_alloc_parallel:
4037d414: 0e 00 10 dc ldd 0(r16),ret0
4037d418: c7 fc 5f ed bb,< ret0,1f,4037d414 <d_alloc_parallel+0x384>
4037d41c: 08 00 02 40 nop
This is the inner loop of bit_spin_lock which is called by hlist_bl_unlock in
d_alloc_parallel:
static inline void bit_spin_lock(int bitnum, unsigned long *addr)
{
/*
* Assuming the lock is uncontended, this never enters
* the body of the outer loop. If it is contended, then
* within the inner loop a non-atomic test is used to
* busywait with less bus contention for a good time to
* attempt to acquire the lock bit.
*/
preempt_disable();
#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
preempt_enable();
do {
cpu_relax();
} while (test_bit(bitnum, addr));
preempt_disable();
}
#endif
__acquire(bitlock);
}
After consideration, I realized that we must be losing bit unlocks.
Then, I noticed that we missed defining atomic64_set_release().
Adding this define fixes the stalls in bit operations.
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38e0c89a19 upstream.
NULL dereference occurs when string that is not ended with space or
newline is written to some dpm sysfs interface (for example pp_dpm_sclk).
This happens because strsep replaces the tmp with NULL if the delimiter
is not present in string, which is then dereferenced by tmp[0].
Reproduction example:
sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk'
Signed-off-by: Paweł Gronowski <me@woland.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0b3e0b1a0 upstream.
The !ATOMIC_IOMAP version of io_maping_init_wc will always return
success, even when the ioremap fails.
Since the ATOMIC_IOMAP version returns NULL when the init fails, and
callers check for a NULL return on error this is unexpected.
During a device probe, where the ioremap failed, a crash can look like
this:
BUG: unable to handle page fault for address: 0000000000210000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 177 Comm:
RIP: 0010:fill_page_dma [i915]
gen8_ppgtt_create [i915]
i915_ppgtt_create [i915]
intel_gt_init [i915]
i915_gem_init [i915]
i915_driver_probe [i915]
pci_device_probe
really_probe
driver_probe_device
The remap failure occurred much earlier in the probe. If it had been
propagated, the driver would have exited with an error.
Return NULL on ioremap failure.
[akpm@linux-foundation.org: detect ioremap_wc() errors earlier]
Fixes: cafaf14a5d ("io-mapping: Always create a struct to hold metadata about the io-mapping")
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200721171936.81563-1-michael.j.ruhl@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 594cced14a upstream.
khugepaged has to drop mmap lock several times while collapsing a page.
The situation can change while the lock is dropped and we need to
re-validate that the VMA is still in place and the PMD is still subject
for collapse.
But we miss one corner case: while collapsing an anonymous pages the VMA
could be replaced with file VMA. If the file VMA doesn't have any
private pages we get NULL pointer dereference:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
anon_vma_lock_write include/linux/rmap.h:120 [inline]
collapse_huge_page mm/khugepaged.c:1110 [inline]
khugepaged_scan_pmd mm/khugepaged.c:1349 [inline]
khugepaged_scan_mm_slot mm/khugepaged.c:2110 [inline]
khugepaged_do_scan mm/khugepaged.c:2193 [inline]
khugepaged+0x3bba/0x5a10 mm/khugepaged.c:2238
The fix is to make sure that the VMA is anonymous in
hugepage_vma_revalidate(). The helper is only used for collapsing
anonymous pages.
Fixes: 99cb0dbd47 ("mm,thp: add read-only THP support for (non-shmem) FS")
Reported-by: syzbot+ed318e8b790ca72c5ad0@syzkaller.appspotmail.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200722121439.44328-1-kirill.shutemov@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d38a2b7a9c upstream.
If the kmem_cache refcount is greater than one, we should not mark the
root kmem_cache as dying. If we mark the root kmem_cache dying
incorrectly, the non-root kmem_cache can never be destroyed. It
resulted in memory leak when memcg was destroyed. We can use the
following steps to reproduce.
1) Use kmem_cache_create() to create a new kmem_cache named A.
2) Coincidentally, the kmem_cache A is an alias for kmem_cache B,
so the refcount of B is just increased.
3) Use kmem_cache_destroy() to destroy the kmem_cache A, just
decrease the B's refcount but mark the B as dying.
4) Create a new memory cgroup and alloc memory from the kmem_cache
B. It leads to create a non-root kmem_cache for allocating memory.
5) When destroy the memory cgroup created in the step 4), the
non-root kmem_cache can never be destroyed.
If we repeat steps 4) and 5), this will cause a lot of memory leak. So
only when refcount reach zero, we mark the root kmem_cache as dying.
Fixes: 92ee383f6d ("mm: fix race between kmem_cache destroy, create and deactivate")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200716165103.83462-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d22a93510 upstream.
It was hard to keep a test running, moving tasks between memcgs with
move_charge_at_immigrate, while swapping: mem_cgroup_id_get_many()'s
refcount is discovered to be 0 (supposedly impossible), so it is then
forced to REFCOUNT_SATURATED, and after thousands of warnings in quick
succession, the test is at last put out of misery by being OOM killed.
This is because of the way moved_swap accounting was saved up until the
task move gets completed in __mem_cgroup_clear_mc(), deferred from when
mem_cgroup_move_swap_account() actually exchanged old and new ids.
Concurrent activity can free up swap quicker than the task is scanned,
bringing id refcount down 0 (which should only be possible when
offlining).
Just skip that optimization: do that part of the accounting immediately.
Fixes: 615d66c37c ("mm: memcontrol: fix memcg id ref counter on swap charge move")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007071431050.4726@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 246c320a8c upstream.
VMA with VM_GROWSDOWN or VM_GROWSUP flag set can change their size under
mmap_read_lock(). It can lead to race with __do_munmap():
Thread A Thread B
__do_munmap()
detach_vmas_to_be_unmapped()
mmap_write_downgrade()
expand_downwards()
vma->vm_start = address;
// The VMA now overlaps with
// VMAs detached by the Thread A
// page fault populates expanded part
// of the VMA
unmap_region()
// Zaps pagetables partly
// populated by Thread B
Similar race exists for expand_upwards().
The fix is to avoid downgrading mmap_lock in __do_munmap() if detached
VMAs are next to VM_GROWSDOWN or VM_GROWSUP VMA.
[akpm@linux-foundation.org: s/mmap_sem/mmap_lock/ in comment]
Fixes: dd2283f260 ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.20+]
Link: http://lkml.kernel.org/r/20200709105309.42495-1-kirill.shutemov@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca9b31f6bb upstream.
When CROSS_COMPILE is set (e.g. aarch64-linux-gnu-), if
$(CROSS_COMPILE)elfedit is found at /usr/bin/aarch64-linux-gnu-elfedit,
GCC_TOOLCHAIN_DIR will be set to /usr/bin/. --prefix= will be set to
/usr/bin/ and Clang as of 11 will search for both
$(prefix)aarch64-linux-gnu-$needle and $(prefix)$needle.
GCC searchs for $(prefix)aarch64-linux-gnu/$version/$needle,
$(prefix)aarch64-linux-gnu/$needle and $(prefix)$needle. In practice,
$(prefix)aarch64-linux-gnu/$needle rarely contains executables.
To better model how GCC's -B/--prefix takes in effect in practice, newer
Clang (since
3452a0d8c1)
only searches for $(prefix)$needle. Currently it will find /usr/bin/as
instead of /usr/bin/aarch64-linux-gnu-as.
Set --prefix= to $(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
(/usr/bin/aarch64-linux-gnu-) so that newer Clang can find the
appropriate cross compiling GNU as (when -no-integrated-as is in
effect).
Cc: stable@vger.kernel.org
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1099
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce684552a2 upstream.
syzbot is reporting general protection fault in do_con_write() [1] caused
by vc->vc_screenbuf == ZERO_SIZE_PTR caused by vc->vc_screenbuf_size == 0
caused by vc->vc_cols == vc->vc_rows == vc->vc_size_row == 0 caused by
fb_set_var() from ioctl(FBIOPUT_VSCREENINFO) on /dev/fb0 , for
gotoxy(vc, 0, 0) from reset_terminal() from vc_init() from vc_allocate()
from con_install() from tty_init_dev() from tty_open() on such console
causes vc->vc_pos == 0x10000000e due to
((unsigned long) ZERO_SIZE_PTR) + -1U * 0 + (-1U << 1).
I don't think that a console with 0 column or 0 row makes sense. And it
seems that vc_do_resize() does not intend to allow resizing a console to
0 column or 0 row due to
new_cols = (cols ? cols : vc->vc_cols);
new_rows = (lines ? lines : vc->vc_rows);
exception.
Theoretically, cols and rows can be any range as long as
0 < cols * rows * 2 <= KMALLOC_MAX_SIZE is satisfied (e.g.
cols == 1048576 && rows == 2 is possible) because of
vc->vc_size_row = vc->vc_cols << 1;
vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row;
in visual_init() and kzalloc(vc->vc_screenbuf_size) in vc_allocate().
Since we can detect cols == 0 or rows == 0 via screenbuf_size = 0 in
visual_init(), we can reject kzalloc(0). Then, vc_allocate() will return
an error, and con_write() will not be called on a console with 0 column
or 0 row.
We need to make sure that integer overflow in visual_init() won't happen.
Since vc_do_resize() restricts cols <= 32767 and rows <= 32767, applying
1 <= cols <= 32767 and 1 <= rows <= 32767 restrictions to vc_allocate()
will be practically fine.
This patch does not touch con_init(), for returning -EINVAL there
does not help when we are not returning -ENOMEM.
[1] https://syzkaller.appspot.com/bug?extid=017265e8553724e514e8
Reported-and-tested-by: syzbot <syzbot+017265e8553724e514e8@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200712111013.11881-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 033724d686 upstream.
syzbot is reporting general protection fault in bitfill_aligned() [1]
caused by integer underflow in bit_clear_margins(). The cause of this
problem is when and how do_vc_resize() updates vc->vc_{cols,rows}.
If vc_do_resize() fails (e.g. kzalloc() fails) when var.xres or var.yres
is going to shrink, vc->vc_{cols,rows} will not be updated. This allows
bit_clear_margins() to see info->var.xres < (vc->vc_cols * cw) or
info->var.yres < (vc->vc_rows * ch). Unexpectedly large rw or bh will
try to overrun the __iomem region and causes general protection fault.
Also, vc_resize(vc, 0, 0) does not set vc->vc_{cols,rows} = 0 due to
new_cols = (cols ? cols : vc->vc_cols);
new_rows = (lines ? lines : vc->vc_rows);
exception. Since cols and lines are calculated as
cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres);
rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
cols /= vc->vc_font.width;
rows /= vc->vc_font.height;
vc_resize(vc, cols, rows);
in fbcon_modechanged(), var.xres < vc->vc_font.width makes cols = 0
and var.yres < vc->vc_font.height makes rows = 0. This means that
const int fd = open("/dev/fb0", O_ACCMODE);
struct fb_var_screeninfo var = { };
ioctl(fd, FBIOGET_VSCREENINFO, &var);
var.xres = var.yres = 1;
ioctl(fd, FBIOPUT_VSCREENINFO, &var);
easily reproduces integer underflow bug explained above.
Of course, callers of vc_resize() are not handling vc_do_resize() failure
is bad. But we can't avoid vc_resize(vc, 0, 0) which returns 0. Therefore,
as a band-aid workaround, this patch checks integer underflow in
"struct fbcon_ops"->clear_margins call, assuming that
vc->vc_cols * vc->vc_font.width and vc->vc_rows * vc->vc_font.heigh do not
cause integer overflow.
[1] https://syzkaller.appspot.com/bug?id=a565882df74fa76f10d3a6fec4be31098dbb37c6
Reported-and-tested-by: syzbot <syzbot+e5fd3e65515b48c02a30@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200715015102.3814-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b34e7e298d upstream.
WRITE_ONCE() isn't the correct way to publish a pointer to a data
structure, since it doesn't include a write memory barrier. Therefore
other tasks may see that the pointer has been set but not see that the
pointed-to memory has finished being initialized yet. Instead a
primitive with "release" semantics is needed.
Use smp_store_release() for this.
The use of READ_ONCE() on the read side is still potentially correct if
there's no control dependency, i.e. if all memory being "published" is
transitively reachable via the pointer itself. But this pairing is
somewhat confusing and error-prone. So just upgrade the read side to
smp_load_acquire() so that it clearly pairs with smp_store_release().
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 3234ac664a ("/dev/mem: Revoke mappings when a driver claims the region")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20200716060553.24618-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 551e553f0d upstream.
Commit 7b668c064e ("serial: 8250: Fix max baud limit in generic 8250
port") fixed limits of a baud rate setting for a generic 8250 port.
In other words since that commit the baud rate has been permitted to be
within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely
normal for a standard 8250 UART port. But there are custom 8250 ports,
which provide extended baud rate limits. In particular the Mediatek 8250
port can work with baud rates up to "uartclk" speed.
Normally that and any other peculiarity is supposed to be handled in a
custom set_termios() callback implemented in the vendor-specific
8250-port glue-driver. Currently that is how it's done for the most of
the vendor-specific 8250 ports, but for some reason for Mediatek a
solution has been spread out to both the glue-driver and to the generic
8250-port code. Due to that a bug has been introduced, which permitted the
extended baud rate limit for all even for standard 8250-ports. The bug
has been fixed by the commit 7b668c064e ("serial: 8250: Fix max baud
limit in generic 8250 port") by narrowing the baud rates limit back down to
the normal bounds. Unfortunately by doing so we also broke the
Mediatek-specific extended bauds feature.
A fix of the problem described above is twofold. First since we can't get
back the extended baud rate limits feature to the generic set_termios()
function and that method supports only a standard baud rates range, the
requested baud rate must be locally stored before calling it and then
restored back to the new termios structure after the generic set_termios()
finished its magic business. By doing so we still use the
serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers,
while the extended baud rate setting procedure will be performed later in
the custom Mediatek-specific set_termios() callback. Second since a true
baud rate is now fully calculated in the custom set_termios() method we
need to locally update the port timeout by calling the
uart_update_timeout() function. After the fixes described above are
implemented in the 8250_mtk.c driver, the Mediatek 8250-port should
get back to normally working with extended baud rates.
Link: https://lore.kernel.org/linux-serial/20200701211337.3027448-1-danielwinkler@google.com
Fixes: 7b668c064e ("serial: 8250: Fix max baud limit in generic 8250 port")
Reported-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: stable <stable@vger.kernel.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Link: https://lore.kernel.org/r/20200714124113.20918-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 926234f1b8 upstream.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
Fixes: 1e15687ea4 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions")
Cc: <stable@vger.kernel.org> #3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc846e9db6 upstream.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this, adjusting the checks
for invalid channels so that enabled channel bits that would have been
lost by shifting are also checked for validity. Only channels 0 to 15
are valid.
Fixes: a8c66b684e ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Cc: <stable@vger.kernel.org> #4.0+: ef75e14a6c: staging: comedi: verify array index is correct before using it
Cc: <stable@vger.kernel.org> #4.0+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f07804ec77 upstream.
`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions
for the "interrupt" subdevice. When `data[0]` is
`INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When
`data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising
and falling edge detection for the digital trigger, using a base channel
number (or shift amount) in `data[3]`, a rising edge bitmask in
`data[4]` and falling edge bitmask in `data[5]`.
If the base channel number (shift amount) is greater than or equal to
the number of channels (24) of the digital input subdevice, there are no
changes to the rising and falling edges, so the mask of channels to be
changed can be set to 0, otherwise the mask of channels to be changed,
and the rising and falling edge bitmasks are shifted by the base channel
number before calling `ni6527_set_edge_detection()` to change the
appropriate registers. Unfortunately, the code is comparing the base
channel (shift amount) to the interrupt subdevice's number of channels
(1) instead of the digital input subdevice's number of channels (24).
Fix it by comparing to 32 because all shift amounts for an `unsigned
int` must be less than that and everything from bit 24 upwards is
ignored by `ni6527_set_edge_detection()` anyway.
Fixes: 110f9e687c ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bd0db42a0 upstream.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
Fixes: 33cdce6293 ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> #3.8+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22a82fa7d6 upstream.
The problems started with the revert (18cc7ac8a2). The
cdns_uart_console.index is statically assigned -1. When the port is
registered, Linux assigns consecutive numbers to it. It turned out that
when using ttyPS1 as console, the index is not updated as we are reusing
the same cdns_uart_console instance for multiple ports. When registering
ttyPS0, it gets updated from -1 to 0, but when registering ttyPS1, it
already is 0 and not updated.
That led to 2ae11c46d5. It assigns the index prior to registering
the uart_driver once. Unfortunately, that ended up breaking the
situation where the probe order does not match the id order. When using
the same device tree for both uboot and linux, it is important that the
serial0 alias points to the console. So some boards reverse those
aliases. This was reported by Jan Kiszka. The proposed fix was reverting
the index assignment and going back to the previous iteration.
However such a reversed assignement (serial0 -> uart1, serial1 -> uart0)
was already partially broken by the revert (18cc7ac8a2). While the
ttyPS device works, the kmsg connection is already broken and kernel
messages go missing. Reverting the id assignment does not fix this.
>From the xilinx_uartps driver pov (after reverting the refactoring
commits), there can be only one console. This manifests in static
variables console_pprt and cdns_uart_console. These variables are not
properly linked and can go out of sync. The cdns_uart_console.index is
important for uart_add_one_port. We call that function for each port -
one of which hopefully is the console. If it isn't, the CON_ENABLED flag
is not set and console_port is cleared. The next cdns_uart_probe call
then tries to register the next port using that same cdns_uart_console.
It is important that console_port and cdns_uart_console (and its index
in particular) stay in sync. The index assignment implemented by
Shubhrajyoti Datta is correct in principle. It just may have to happen a
second time if the first cdns_uart_probe call didn't encounter the
console device. And we shouldn't change the index once the console uart
is registered.
Reported-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Link: https://lore.kernel.org/linux-serial/f4092727-d8f5-5f91-2c9f-76643aace993@siemens.com/
Fixes: 18cc7ac8a2 ("Revert "serial: uartps: Register own uart console and driver structures"")
Fixes: 2ae11c46d5 ("tty: xilinx_uartps: Fix missing id assignment to the console")
Fixes: 76ed2e1057 ("Revert "tty: xilinx_uartps: Fix missing id assignment to the console"")
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200713073227.GA3805@laureti-dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e6705182d upstream.
This reverts commit 9ffad9263b.
Upon additional testing with older servers, it was found that
the original commit introduced a regression when using the old SMB1
dialect and rsyncing over an existing file.
The patch will need to be respun to address this, likely including
a larger refactoring of the SMB1 and SMB3 rename code paths to make
it less confusing and also to address some additional rename error
cases that SMB3 may be able to workaround.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Patrick Fernie <patrick.fernie@gmail.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 38b7c2a3ff ]
While digging through the recent mmiowb preemption issue it came up that
we aren't actually preventing IO from crossing a scheduling boundary.
While it's a bit ugly to overload smp_mb__after_spinlock() with this
behavior, it's what PowerPC is doing so there's some precedent.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd024e82e4 ]
Although mmiowb() is concerned only with serialising MMIO writes occuring
in contexts where a spinlock is held, the call to mmiowb_set_pending()
from the MMIO write accessors can occur in preemptible contexts, such
as during driver probe() functions where ordering between CPUs is not
usually a concern, assuming that the task migration path provides the
necessary ordering guarantees.
Unfortunately, the default implementation of mmiowb_set_pending() is not
preempt-safe, as it makes use of a a per-cpu variable to track its
internal state. This has been reported to generate the following splat
on riscv:
| BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
| caller is regmap_mmio_write32le+0x1c/0x46
| CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-hfu+ #1
| Call Trace:
| walk_stackframe+0x0/0x7a
| dump_stack+0x6e/0x88
| regmap_mmio_write32le+0x18/0x46
| check_preemption_disabled+0xa4/0xaa
| regmap_mmio_write32le+0x18/0x46
| regmap_mmio_write+0x26/0x44
| regmap_write+0x28/0x48
| sifive_gpio_probe+0xc0/0x1da
Although it's possible to fix the driver in this case, other splats have
been seen from other drivers, including the infamous 8250 UART, and so
it's better to address this problem in the mmiowb core itself.
Fix mmiowb_set_pending() by using the raw_cpu_ptr() to get at the mmiowb
state and then only updating the 'mmiowb_pending' field if we are not
preemptible (i.e. we have a non-zero nesting count).
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Palmer Dabbelt <palmer@dabbelt.com>
Reported-by: Emil Renner Berthing <kernel@esmil.dk>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20200716112816.7356-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81e96851ea ]
The clang integrated assembler requires the 'cmp' instruction to
have a length prefix here:
arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl')
cmp $0xffffffff,-24(%ebp)
^
Make this a 32-bit comparison, which it was clearly meant to be.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5afc78551b ]
Rather than open-code test_tsk_thread_flag() at each callsite, simply
replace the couple of offenders with calls to test_tsk_thread_flag()
directly.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a03746c8b ]
Stefan Dietrich reports invalid temperature source messages on Asus Formula
XII Z490.
nct6775 nct6775.656: Invalid temperature source 28 at index 0,
source register 0x100, temp register 0x73
Debugging suggests that temperature source 28 reports the CPU temperature.
Let's assume that temperature sources 28 and 29 reflect "PECI Agent {0,1}
Calibration", similar to other chips of the series.
Reported-by: Stefan Dietrich <roots@gmx.de>
Cc: Stefan Dietrich <roots@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d1d41c075 ]
Issue:
When PEC is enabled, binding adm1272 to the adm1275 would
fail due to PEC error. See below:
adm1275: probe of xxxx failed with error -74
Diagnosis:
Per the datasheet of adm1272, adm1278, adm1293 and amd1294,
PMON_CONFIG (0xd4) is 16bits wide. On the other hand,
PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not
assume everything is 8bits wide and read only 8bits from it.
Solution:
If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word.
Else, use i2c_read_byte
Testing:
Binding adm1272 to the driver.
The change is only tested on adm1272.
Signed-off-by: Chu Lin <linchuyuan@google.com>
Link: https://lore.kernel.org/r/20200709040612.3977094-1-linchuyuan@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8f8529e2c ]
gr_ep_init() does not assign the allocated request anywhere if allocation
of memory for the buffer fails. This is a memory leak fixed by the given
patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8678c71c17 ]
Due to recent fixes in m68k arch-specific I/O accessor macros, this
driver is not working anymore for ColdFire. Fix wrong tcd endianness
removing additional swaps, since edma_writex() functions should already
take care of any eventual swap if needed.
Note, i could only test the change in ColdFire mcf54415 and Vybrid
vf50 / Colibri where i don't see any issue. So, every feedback and
test for all other SoCs involved is really appreciated.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200701225205.1674463-1-angelo.dureghello@timesys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc4071aafc ]
aspeed_create_fan() reads a pwm_port value using of_property_read_u32().
If pwm_port will be more than ARRAY_SIZE(pwm_port_params), there will be
a buffer overflow in
aspeed_create_pwm_port()->aspeed_set_pwm_port_enable(). The patch fixes
the potential buffer overflow.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Link: https://lore.kernel.org/r/20200703111518.9644-1-novikov@ispras.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e84861fec3 ]
This function is used by dev_get_regmap() to retrieve a regmap for the
specified device. If the device has more than one regmap, the name parameter
can be used to specify one.
The code here uses a pointer comparison to check for equal strings. This
however will probably always fail, as the regmap->name is allocated via
kstrdup_const() from the regmap's config->name.
Fix this by using strcmp() instead.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed3e98e919 ]
Instead, expose the key via the input framework, as SW_MACHINE_COVER
The chip-detect GPIO is actually detecting if the cover is closed.
Technically it's possible to use the SD card with open cover. The
only downside is risk of battery falling out and user being able
to physically remove the card.
The behaviour of SD card not being available when the device is
open is unexpected and creates more problems than it solves. There
is a high chance, that more people accidentally break their rootfs
by opening the case without physically removing the card.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Link: https://lore.kernel.org/r/20200612125402.18393-3-merlijn@wizzup.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5d81646fa ]
The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the
Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239)
of the Apple Wireless Keyboard (2009 ANSI version) <sigh>.
But its F1 - F10 keys are marked as sending F1 - F10, not the special
functions hid-apple.c maps them too; and since its descriptors do not
contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the
Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped
to key-codes which have not been set in the keybit array causing them
to not send any events at all.
The lack of a usage code matching the Fn key in the clone is actually
useful as this allows solving this problem in a generic way.
This commits adds a fn_found flag and it adds a input_configured
callback which checks if this flag is set once all usages have been
mapped. If it is not set, then assume this is a clone and clear the
quirks bitmap so that the hid-apple code does not add any special
handling to this keyboard.
This fixes F1 - F6 not sending anything at all and F7 - F12 sending
the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on
similar clones.
Cc: Joao Moreno <mail@joaomoreno.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d3f53a80e ]
Using uhid and KASAN this driver crashed because it was getting
several connection events where it only expected one. Then the
device was added several times to the static device list and it got
corrupted.
This patch checks if the device is already in the list before adding
it.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Tested-by: Siarhei Vishniakou <svv@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43e666acb7 ]
The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.
Signed-off-by: Federico Ricchiuto <fed.ricchiuto@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7359608a27 ]
Commit ed66f991bb ("module: Refactor section attr into bin attribute")
removed the 'name' field from 'struct module_sect_attr' triggering the
following error when invoking lx-symbols:
(gdb) lx-symbols
loading vmlinux
scanning for modules in linux/build
loading @0xffffffffc014f000: linux/build/drivers/net/tun.ko
Python Exception <class 'gdb.error'> There is no member named name.:
Error occurred in Python: There is no member named name.
This patch fixes the issue taking the module name from the 'struct
attribute'.
Fixes: ed66f991bb ("module: Refactor section attr into bin attribute")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Kieran Bingham <kbingham@kernel.org>
Link: http://lkml.kernel.org/r/20200722102239.313231-1-sgarzare@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fdbe136ae ]
Sealevel XR17V35X based devices are inoperable on kernel versions
4.11 and above due to a change in the GPIO preconfiguration introduced in
commit
7dea8165f1. This patch fixes this by preconfiguring the GPIO on Sealevel
cards to the value (0x00) used prior to commit 7dea8165f1
With GPIOs preconfigured as per commit 7dea8165f1 all ports on
Sealevel XR17V35X based devices become stuck in high impedance
mode, regardless of dip-switch or software configuration. This
causes the device to become effectively unusable. This patch (in
various forms) has been distributed to our customers and no issues
related to it have been reported.
Fixes: 7dea8165f1 ("serial: exar: Preconfigure xr17v35x MPIOs as output")
Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2007221605270.13247@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02b9aec592 ]
When I have KASAN enabled on my kernel and I start stressing the
touchscreen my system tends to hang. The touchscreen is one of the
only things that does a lot of big i2c transfers and ends up hitting
the DMA paths in the geni i2c driver. It appears that KASAN adds
enough delay in my system to tickle a race condition in the DMA setup
code.
When the system hangs, I found that it was running the geni_i2c_irq()
over and over again. It had these:
m_stat = 0x04000080
rx_st = 0x30000011
dm_tx_st = 0x00000000
dm_rx_st = 0x00000000
dma = 0x00000001
Notably we're in DMA mode but are getting M_RX_IRQ_EN and
M_RX_FIFO_WATERMARK_EN over and over again.
Putting some traces in geni_i2c_rx_one_msg() showed that when we
failed we were getting to the start of geni_i2c_rx_one_msg() but were
never executing geni_se_rx_dma_prep().
I believe that the problem here is that we are starting the geni
command before we run geni_se_rx_dma_prep(). If a transfer makes it
far enough before we do that then we get into the state I have
observed. Let's change the order, which seems to work fine.
Although problems were seen on the RX path, code inspection suggests
that the TX should be changed too. Change it as well.
Fixes: 37692de5d5 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb01597158 ]
On R-Car Gen2, we get a timeout when reading from the address set in
ICSAR, even though the slave interface is disabled. Clearing it fixes
this situation. Note that Gen3 is not affected.
To reproduce: bind and undbind an I2C slave on some bus, run
'i2cdetect' on that bus.
Fixes: de20d1857d ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26cb7085c8 ]
For ENETC ports that register an external MDIO bus,
the bus doesn't get removed on the error bailout path
of enetc_pf_probe().
This issue became much more visible after recent:
commit 07095c025a ("net: enetc: Use DT protocol information to set up the ports")
Before this commit, one could make probing fail on the error
path only by having register_netdev() fail, which is unlikely.
But after this commit, because it moved the enetc_of_phy_get()
call up in the probing sequence, now we can trigger an mdiobus_free()
bug just by forcing enetc_alloc_msix() to return error, i.e. with the
'pci=nomsi' kernel bootarg (since ENETC relies on MSI support to work),
as the calltrace below shows:
kernel BUG at /home/eiz/work/enetc/net/drivers/net/phy/mdio_bus.c:648!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[...]
Hardware name: LS1028A RDB Board (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--)
pc : mdiobus_free+0x50/0x58
lr : devm_mdiobus_free+0x14/0x20
[...]
Call trace:
mdiobus_free+0x50/0x58
devm_mdiobus_free+0x14/0x20
release_nodes+0x138/0x228
devres_release_all+0x38/0x60
really_probe+0x1c8/0x368
driver_probe_device+0x5c/0xc0
device_driver_attach+0x74/0x80
__driver_attach+0x8c/0xd8
bus_for_each_dev+0x7c/0xd8
driver_attach+0x24/0x30
bus_add_driver+0x154/0x200
driver_register+0x64/0x120
__pci_register_driver+0x44/0x50
enetc_pf_driver_init+0x24/0x30
do_one_initcall+0x60/0x1c0
kernel_init_freeable+0x1fc/0x274
kernel_init+0x14/0x110
ret_from_fork+0x10/0x34
Fixes: ebfcb23d62 ("enetc: Add ENETC PF level external MDIO support")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9affa43581 ]
We hold the cl_lock here, and that's enough to keep stateid's from going
away, but it's not enough to prevent the files they point to from going
away. Take fi_lock and a reference and check for NULL, as we do in
other code.
Reported-by: NeilBrown <neilb@suse.de>
Fixes: 78599c42ae ("nfsd4: add file to display list of client's opens")
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1264d7fa3a ]
When regmap_update_bits failed in ave_init(), calls of the functions
reset_control_assert() and clk_disable_unprepare() were missed.
Add goto out_reset_assert to do this.
Fixes: 57878f2f46 ("net: ethernet: ave: add support for phy-mode setting of system controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8210e344cc ]
The sync_thread_backup only checks sk_receive_queue is empty or not,
there is a situation which cannot sync the connection entries when
sk_receive_queue is empty and sk_rmem_alloc is larger than sk_rcvbuf,
the sync packets are dropped in __udp_enqueue_schedule_skb, this is
because the packets in reader_queue is not read, so the rmem is
not reclaimed.
Here I add the check of whether the reader_queue of the udp sock is
empty or not to solve this problem.
Fixes: 2276f58ac5 ("udp: use a separate rx queue for packet reception")
Reported-by: zhouxudong <zhouxudong8@huawei.com>
Signed-off-by: guodeqing <geffrey.guo@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb61c2d699 ]
It was found that qed_pglueb_rbc_attn_handler() can produce a lot of
false-positive error detections on driver load/reload (especially after
crashes/recoveries) and spam the kernel log:
[ 4.958275] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d00ff0
[ 2079.146764] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[ 2116.374631] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[ 2135.250564] [qed_pglueb_rbc_attn_handler:324()]ICPL error - 00d80ff0
[...]
Reduce the logging level of two false-positive prone error messages from
notice to verbose on initialization (only) to not mix it with real error
attentions while debugging.
Fixes: 666db4862f ("qed: Revise load sequence to avoid PCI errors")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ea999039f ]
Change the verbosity of the "don't support RoCE & iWARP simultaneously"
warning to debug level to stop flooding on driver/hardware initialization:
[ 4.783230] qede 01:00.00: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth0]
[ 4.810020] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 4.861186] qede 01:00.01: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth1]
[ 4.893311] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 5.181713] qede a1:00.00: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth2]
[ 5.224740] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 5.276449] qede a1:00.01: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth3]
[ 5.318671] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
[ 5.369548] qede a1:00.02: Storm FW 8.37.7.0, Management FW 8.52.9.0
[MBI 15.10.6] [eth4]
[ 5.411645] [qed_rdma_set_pf_params:2076()]Current day drivers don't
support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only
Fixes: e0a8f9de16 ("qed: Add iWARP enablement support")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c9d8e01f0 ]
In the nsim_create(), rtnl_lock() is called before nsim_bpf_init().
If nsim_bpf_init() is failed, rtnl_unlock() should be called,
but it isn't called.
So, unbalanced locking would occur.
Fixes: e05b2d141f ("netdevsim: move netdev creation/destruction to dev probe")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3506b2f42d ]
When doing "ip link set dev ... up" for a ksz9477 backed link,
ksz9477_phy_setup is called and it calls phy_remove_link_mode to remove
1000baseT HDX. During phy_remove_link_mode, phy_advertise_supported is
called. Doing so reverts any previous change to advertised link modes
e.g. using a udevd .link file.
phy_remove_link_mode is not meant to be used while opening a link and
should be called during phy probe when the link is not yet available to
userspace.
Therefore move the phy_remove_link_mode calls into
ksz9477_switch_register. It indirectly calls dsa_register_switch, which
creates the relevant struct phy_devices and we update the link modes
right after that. At that time dev->features is already initialized by
ksz9477_switch_detect.
Remove phy_setup from ksz_dev_ops as no users remain.
Link: https://lore.kernel.org/netdev/20200715192722.GD1256692@lunn.ch/
Fixes: 42fc6a4c61 ("net: dsa: microchip: prepare PHY for proper advertisement")
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ceca59fb3 ]
The content of the TX desc is automatically cleared by the HW
when the HW has sent out the packet to the wire. When desc filling
fails in hns3_nic_net_xmit(), it will call hns3_clear_desc() to do
the error handling, which miss zeroing of the TX desc and the
checking if a unmapping is needed.
So add the zeroing and checking in hns3_clear_desc() to avoid the
above problem. Also add DESC_TYPE_UNKNOWN to indicate the info in
desc_cb is not valid, because hns3_nic_reclaim_desc() may treat
the desc_cb->type of zero as packet and add to the sent pkt
statistics accordingly.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit befc113c56 ]
The ag71xx_mdio_probe() forgets to call clk_disable_unprepare() when
of_reset_control_get_exclusive() failed. Add the missed call to fix it.
Fixes: d51b6ce441 ("net: ethernet: add ag71xx driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Huang Guobin <huangguobin4@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbec2153a9 ]
Add in a couple of forgotten spinlocks and fix up some of
the debug messages around filter management.
Fixes: c1e329ebec ("ionic: Add management of rx filters")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f85ae16f92 ]
Use an offset to write the second half of the regs data into the
second half of the buffer instead of overwriting the first half.
Fixes: 4d03e00a21 ("ionic: Add initial ethtool support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dbaeb87f2 ]
When mlxsw_core_trap_register fails in mlxsw_emad_init,
destroy_workqueue() shouled be called to destroy mlxsw_core->emad_wq.
Fixes: d965465b60 ("mlxsw: core: Fix possible deadlock")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bca9749b1a ]
If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev)
should be called to free the ndev created earlier. Otherwise, a memleak
will occur.
Fixes: 7d2911c438 ("net: smc91x: Fix gpios for device tree based booting")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 473309fb83 ]
From Documentation/networking/timestamping.txt:
A driver which supports hardware time stamping shall update the
struct with the actual, possibly more permissive configuration.
Do update the struct passed when we upscale the requested time
stamping mode.
Fixes: cb646e2b02 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3195c4706b ]
The size used when calling 'pci_alloc_consistent()' and
'pci_free_consistent()' should match.
Fix it and have it consistent with the corresponding call in 'rr_close()'.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e19485dc7a ]
This is to fix lkp cppcheck warnings:
drivers/fpga/dfl-pci.c:230:6: warning: The scope of the variable 'ret' can be reduced. [variableScope]
int ret = 0;
^
drivers/fpga/dfl-pci.c:230:10: warning: Variable 'ret' is assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Fixes: 3c2760b78f ("fpga: dfl: pci: fix return value of cci_pci_sriov_configure")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27640ce68d ]
The current completion ring sizing formula is wrong with TPA enabled.
The formula assumes that the number of TPA completions are bound by the
RX ring size, but that's not true. TPA_START completions are immediately
recycled so they are not bound by the RX ring size. We must add
bp->max_tpa to the worst case maximum RX and TPA completions.
The completion ring can overflow because of this mistake. This will
cause hardware to disable the completion ring when this happens,
leading to RX and TX traffic to stall on that ring. This issue is
generally exposed only when the RX ring size is set very small.
Fix the formula by adding bp->max_tpa to the number of RX completions
if TPA is enabled.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.");
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 163e9ef636 ]
The driver was modified to not rely on rtnl lock to protect link
settings about 2 years ago. The pause setting was missed when
making that change. Fix it by acquiring link_lock mutex before
calling bnxt_hwrm_set_pause().
Fixes: e2dc9b6e38 ("bnxt_en: Don't use rtnl lock to protect link change logic in workqueue.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5909ca110b upstream.
When locking pages for delalloc, we check if it's dirty and mapping still
matches. If it does not match, we need to return -EAGAIN and release all
pages. Only the current page was put though, iterate over all the
remaining pages too.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48cfa61b58 upstream.
It is possible to cause a btrfs mount to fail by racing it with a slow
umount. The crux of the sequence is generic_shutdown_super not yet
calling sop->put_super before btrfs_mount_root calls btrfs_open_devices.
If that occurs, btrfs_open_devices will decide the opened counter is
non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to
0. From here, mount will call sget which will result in grab_super
trying to take the super block umount semaphore. That semaphore will be
held by the slow umount, so mount will block. Before up-ing the
semaphore, umount will delete the super block, resulting in mount's sget
reliably allocating a new one, which causes the mount path to dutifully
fill it out, and increment total_rw_bytes a second time, which causes
the mount to fail, as we see double the expected bytes.
Here is the sequence laid out in greater detail:
CPU0 CPU1
down_write sb->s_umount
btrfs_kill_super
kill_anon_super(sb)
generic_shutdown_super(sb);
shrink_dcache_for_umount(sb);
sync_filesystem(sb);
evict_inodes(sb); // SLOW
btrfs_mount_root
btrfs_scan_one_device
fs_devices = device->fs_devices
fs_info->fs_devices = fs_devices
// fs_devices-opened makes this a no-op
btrfs_open_devices(fs_devices, mode, fs_type)
s = sget(fs_type, test, set, flags, fs_info);
find sb in s_instances
grab_super(sb);
down_write(&s->s_umount); // blocks
sop->put_super(sb)
// sb->fs_devices->opened == 2; no-op
spin_lock(&sb_lock);
hlist_del_init(&sb->s_instances);
spin_unlock(&sb_lock);
up_write(&sb->s_umount);
return 0;
retry lookup
don't find sb in s_instances (deleted by CPU0)
s = alloc_super
return s;
btrfs_fill_super(s, fs_devices, data)
open_ctree // fs_devices total_rw_bytes improperly set!
btrfs_read_chunk_tree
read_one_dev // increment total_rw_bytes again!!
super_total_bytes < fs_devices->total_rw_bytes // ERROR!!!
To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree
before the calls to read_one_dev, while holding the sb umount semaphore
and the uuid mutex.
To reproduce, it is sufficient to dirty a decent number of inodes, then
quickly umount and mount.
for i in $(seq 0 500)
do
dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1
done
umount /mnt/foo&
mount /mnt/foo
does the trick for me.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cacc6f576 upstream.
The RT5670_PWR_ANLG1 register has 3 bits to select the LDO voltage,
so the correct mask is 0x7 not 0x3.
Because of this wrong mask we were programming the ldo bits
to a setting of binary 001 (0x05 & 0x03) instead of binary 101
when moving to SND_SOC_BIAS_PREPARE.
According to the datasheet 001 is a reserved value, so no idea
what it did, since the driver was working fine before I guess we
got lucky and it does something which is ok.
Fixes: 5e8351de74 ("ASoC: add RT5670 CODEC driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200628155231.71089-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60379ba085 upstream.
snd_info_get_line() has a sanity check of NULL buffer -- both buffer
itself being NULL and buffer->buffer being NULL. Basically both
checks are valid and necessary, but the problem is that it's with
snd_BUG_ON() macro that triggers WARN_ON(). The latter condition
(NULL buffer->buffer) can be met arbitrarily by user since the buffer
is allocated at the first write, so it means that user can trigger
WARN_ON() at will.
This patch addresses it by simply moving buffer->buffer NULL check out
of snd_BUG_ON() so that spurious WARNING is no longer triggered.
Reported-by: syzbot+e42d0746c3c3699b6061@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200717084023.5928-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe5ed7ab99 upstream.
If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp()
does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used
to work when this code was written, but then GDB started to validate si_code
and now it simply can't use breakpoints if the tracee has an active uprobe:
# cat test.c
void unused_func(void)
{
}
int main(void)
{
return 0;
}
# gcc -g test.c -o test
# perf probe -x ./test -a unused_func
# perf record -e probe_test:unused_func gdb ./test -ex run
GNU gdb (GDB) 10.0.50.20200714-git
...
Program received signal SIGTRAP, Trace/breakpoint trap.
0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2
(gdb)
The tracee hits the internal breakpoint inserted by GDB to monitor shared
library events but GDB misinterprets this SIGTRAP and reports a signal.
Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user()
and fixes the problem.
This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally
wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP),
but this doesn't confuse GDB and needs another x86-specific patch.
Reported-by: Aaron Merey <amerey@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200723154420.GA32043@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1dae7e0e58 upstream.
[BUG]
There are several reported runaway balance, that balance is flooding the
log with "found X extents" where the X never changes.
[CAUSE]
Commit d2311e6985 ("btrfs: relocation: Delay reloc tree deletion after
merge_reloc_roots") introduced BTRFS_ROOT_DEAD_RELOC_TREE bit to
indicate that one subvolume has finished its tree blocks swap with its
reloc tree.
However if balance is canceled or hits ENOSPC halfway, we didn't clear
the BTRFS_ROOT_DEAD_RELOC_TREE bit, leaving that bit hanging forever
until unmount.
Any subvolume root with that bit, would cause backref cache to skip this
tree block, as it has finished its tree block swap. This would cause
all tree blocks of that root be ignored by balance, leading to runaway
balance.
[FIX]
Fix the problem by also clearing the BTRFS_ROOT_DEAD_RELOC_TREE bit for
the original subvolume of orphan reloc root.
Add an umount check for the stale bit still set.
Fixes: d2311e6985 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[Manually solve the conflicts due to no btrfs root refs rework]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65caafd0d2 upstream.
Reverting commit d03727b248 "NFSv4 fix CLOSE not waiting for
direct IO compeletion". This patch made it so that fput() by calling
inode_dio_done() in nfs_file_release() would wait uninterruptably
for any outstanding directIO to the file (but that wait on IO should
be killable).
The problem the patch was also trying to address was REMOVE returning
ERR_ACCESS because the file is still opened, is supposed to be resolved
by server returning ERR_FILE_OPEN and not ERR_ACCESS.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6348dd291e ]
There exists a sleep-while-atomic bug while accessing the dmabuf->name
under mutex in the dmabuffs_dname(). This is caused from the SELinux
permissions checks on a process where it tries to validate the inherited
files from fork() by traversing them through iterate_fd() (which
traverse files under spin_lock) and call
match_file(security/selinux/hooks.c) where the permission checks happen.
This audit information is logged using dump_common_audit_data() where it
calls d_path() to get the file path name. If the file check happen on
the dmabuf's fd, then it ends up in ->dmabuffs_dname() and use mutex to
access dmabuf->name. The flow will be like below:
flush_unauthorized_files()
iterate_fd()
spin_lock() --> Start of the atomic section.
match_file()
file_has_perm()
avc_has_perm()
avc_audit()
slow_avc_audit()
common_lsm_audit()
dump_common_audit_data()
audit_log_d_path()
d_path()
dmabuffs_dname()
mutex_lock()--> Sleep while atomic.
Call trace captured (on 4.19 kernels) is below:
___might_sleep+0x204/0x208
__might_sleep+0x50/0x88
__mutex_lock_common+0x5c/0x1068
__mutex_lock_common+0x5c/0x1068
mutex_lock_nested+0x40/0x50
dmabuffs_dname+0xa0/0x170
d_path+0x84/0x290
audit_log_d_path+0x74/0x130
common_lsm_audit+0x334/0x6e8
slow_avc_audit+0xb8/0xf8
avc_has_perm+0x154/0x218
file_has_perm+0x70/0x180
match_file+0x60/0x78
iterate_fd+0x128/0x168
selinux_bprm_committing_creds+0x178/0x248
security_bprm_committing_creds+0x30/0x48
install_exec_creds+0x1c/0x68
load_elf_binary+0x3a4/0x14e0
search_binary_handler+0xb0/0x1e0
So, use spinlock to access dmabuf->name to avoid sleep-while-atomic.
Cc: <stable@vger.kernel.org> [5.3+]
Signed-off-by: Charan Teja Kalla <charante@codeaurora.org>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
[sumits: added comment to spinlock_t definition to avoid warning]
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a83e7f0d-4e54-9848-4b58-e1acdbe06735@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e52928e8d5 ]
According to Documentation/devicetree/bindings/sound/simple-card.txt
the 'simple-audio-card,dai-link' may be omitted when the card has
only one DAI link, which is the case here.
Get rid of 'simple-audio-card,dai-link' in order to fix the following
build warning with W=1:
arch/arm/boot/dts/imx6qdl-gw551x.dtsi:109.32-121.5: Warning (unit_address_vs_reg): /sound-digital/simple-audio-card,dai-link@0: node has a unit name, but no reg property
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3beca48a4 ]
Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type
IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after
creating the irqdomain. The only purpose of these FW nodes is to convey
name information. When this was introduced the core code did not store the
pointer to the node in the irqdomain. A recent change stored the firmware
node pointer in irqdomain for other reasons and missed to notice that the
usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence
are broken by this. Storing a dangling pointer is dangerous itself, but in
case that the domain is destroyed later on this leads to a double free.
Remove the freeing of the firmware node after creating the irqdomain from
all affected call sites to cure this.
Fixes: 711419e504 ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 382761dc63 ]
bio_uninit is the proper API to clean up a BIO that has been allocated
on stack or inside a structure that doesn't come from the BIO allocator.
Switch dm to use that instead of bio_disassociate_blkg, which really is
an implementation detail. Note that the bio_uninit calls are also moved
to the two callers of __send_empty_flush, so that they better pair with
the bio_init calls used to initialize them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fd181456a ]
BRM_status_show() has several error branches, but none of them record the
error in the error return.
Also while at it remove the manual mutex_unlock() of the pci_access_mutex
in case of an ongoing pci error recovery or host removal and jump to the
cleanup label instead.
Note: We can safely jump to out from here as io_unit_pg3 is initialized to
NULL and if it hasn't been allocated, kfree() skips the NULL pointer.
[mkp: compilation warning]
Link: https://lore.kernel.org/r/20200701131454.5255-1-johannes.thumshirn@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0156e76d38 ]
Tegra TRM says worst-case reply time is 1216us, and this should fix some
spurious timeouts that have been popping up.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28b18e4eb5 ]
clang static analysis flags this garbage return
drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
return v;
^~~~~~~~
static inline u16 gm_phy_read( ...
{
u16 v;
__gm_phy_read(hw, port, reg, &v);
return v;
}
__gm_phy_read can return without setting v.
So handle similar to skge.c's gm_phy_read, initialize v.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8 ]
When HDMI PCM devices are opened in a specific order, with at least one
HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the
connected monitor, on recent Intel platforms (ICL/JSL and newer). While
this is not a typical sequence, at least Pulseaudio does this every time
when it is started, to discover the available PCMs.
The rootcause is an invalid assumption in hdmi_add_pin(), where the
total number of converters is assumed to be known at the time the
function is called. On older Intel platforms this held true, but after
ICL/JSL, the order how pins and converters are in the subnode list as
returned by snd_hda_get_sub_nodes(), was changed. As a result,
information for some converters was not stored to per_pin->mux_nids.
And this means some pins cannot be connected to all converters, and
application instead gets -EBUSY instead at open.
The assumption that converters are always before pins in the subnode
list, is not really a valid one. Fix the problem in hdmi_parse_codec()
by introducing separate loops for discovering converters and pins.
BugLink: https://github.com/thesofproject/linux/issues/1978
BugLink: https://github.com/thesofproject/linux/issues/2216
BugLink: https://github.com/thesofproject/linux/issues/2217
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dc829a135 ]
When this driver transmits data,
first this driver will remove a pseudo header of 1 byte,
then the lapb module will prepend the LAPB header of 2 or 3 bytes,
then this driver will prepend a length field of 2 bytes,
then the underlying Ethernet device will prepend its own header.
So, the header length required should be:
-1 + 3 + 2 + "the header length needed by the underlying device".
This patch fixes kernel panic when this driver is used with AF_PACKET
SOCK_DGRAM sockets.
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d5ab14442 ]
Increment *pos in the cpuinfo_op.next to fix the following warning
triggered by cat /proc/cpuinfo:
seq_file: buggy .next function c_next did not update position index
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73f9941306 ]
Building xtensa kernel with gcc-10 produces the following warnings:
arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types
for built-in function ‘__sync_fetch_and_and_4’;
expected ‘unsigned int(volatile void *, unsigned int)’
[-Wbuiltin-declaration-mismatch]
arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types
for built-in function ‘__sync_fetch_and_or_4’;
expected ‘unsigned int(volatile void *, unsigned int)’
[-Wbuiltin-declaration-mismatch]
Fix declarations of these functions to avoid the warning.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5aee52c44d ]
clang static analysis flags several null function pointer problems.
drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage]
spi_transport_max_attr(offset, "%d\n");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reviewing the store_spi_store_max macro
if (i->f->set_##field)
return -EINVAL;
should be
if (!i->f->set_##field)
return -EINVAL;
Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.com
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b467b6387 ]
Without this patch, eapol frames cannot be received in mesh
mode, when 802.1X should be used. Initially only a MGTK is
defined, which is found and set as rx->key, when there are
no other keys set. ieee80211_drop_unencrypted would then
drop these eapol frames, as they are data frames without
encryption and there exists some rx->key.
Fix this by differentiating between mesh eapol frames and
other data frames with existing rx->key. Allow mesh mesh
eapol frames only if they are for our vif address.
With this patch in-place, ieee80211_rx_h_mesh_fwding continues
after the ieee80211_drop_unencrypted check and notices, that
these eapol frames have to be delivered locally, as they should.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de
[small code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9486727f59 upstream.
Current Intel SVM is designed by setting the pgd_t of the processor page
table to FLPTR field of the PASID entry. The first level translation only
supports 4 and 5 level paging structures, hence it's infeasible for the
IOMMU to share a processor's page table when it's running in 32-bit mode.
Let's disable 32bit support for now and claim support only when all the
missing pieces are ready in the future.
Fixes: 1c4f88b7f1 ("iommu/vt-d: Shared virtual address in scalable mode")
Suggested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aadf9dcef9 upstream.
The trace symbol printer (__print_symbolic()) ignores symbols that map to
an empty string and prints the hex value instead.
Fix the symbol for rxrpc_cong_no_change to " -" instead of "" to avoid
this.
Fixes: b54a134a7d ("rxrpc: Fix handling of enums-to-string translation in tracing")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f3fead621 upstream.
Currently target_copy() is used only for sending linger pings, so
this doesn't come up, but generally omitting recovery_deletes can
result in unneeded resends (force_resend in calc_target()).
Fixes: ae78dd8139 ("libceph: make RECOVERY_DELETES feature create a new interval")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a2f704eb2 upstream.
Commit 429120f3df starts to take account of segment's start dma address
when computing max segment size, and data type of 'unsigned long'
is used to do that. However, the segment mask may be 0xffffffff, so
the figured out segment size may be overflowed in case of zero physical
address on 32bit arch.
Fix the issue by returning queue_max_segment_size() directly when that
happens.
Fixes: 429120f3df ("block: fix splitting segments on boundary masks")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 429120f3df upstream.
We ran into a problem with a mpt3sas based controller, where we would
see random (and hard to reproduce) file corruption). The issue seemed
specific to this controller, but wasn't specific to the file system.
After a lot of debugging, we find out that it's caused by segments
spanning a 4G memory boundary. This shouldn't happen, as the default
setting for segment boundary masks is 4G.
Turns out there are two issues in get_max_segment_size():
1) The default segment boundary mask is bypassed
2) The segment start address isn't taken into account when checking
segment boundary limit
Fix these two issues by removing the bypass of the segment boundary
check even if the mask is set to the default value, and taking into
account the actual start address of the request when checking if a
segment needs splitting.
Cc: stable@vger.kernel.org # v5.1+
Reviewed-by: Chris Mason <clm@fb.com>
Tested-by: Chris Mason <clm@fb.com>
Fixes: dcebd75592 ("block: use bio_for_each_bvec() to compute multi-page bvec count")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dropped const on the page pointer, ppc page_to_phys() doesn't mark the
page as const...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 05051496b2 upstream.
"u64 *wptr" points to the the wptr value in write back buffer and
"*wptr = (*wptr) >> 2;" results in the value being overwritten each time
when ->get_wptr() is called.
umr uses /sys/kernel/debug/dri/0/amdgpu_ring_sdma0 to get rptr/wptr and
decode ring content and it is affected by this issue.
fix and simplify the logic similar as sdma_v4_0_ring_get_wptr().
v2: fix for sdma5.2 as well
v3: drop sdma 5.2 changes for 5.8 and stable
Suggested-by: Le Ma <le.ma@amd.com>
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit baedb87d1b upstream.
Setting interrupt affinity on inactive interrupts is inconsistent when
hierarchical irq domains are enabled. The core code should just store the
affinity and not call into the irq chip driver for inactive interrupts
because the chip drivers may not be in a state to handle such requests.
X86 has a hacky workaround for that but all other irq chips have not which
causes problems e.g. on GIC V3 ITS.
Instead of adding more ugly hacks all over the place, solve the problem in
the core code. If the affinity is set on an inactive interrupt then:
- Store it in the irq descriptors affinity mask
- Update the effective affinity to reflect that so user space has
a consistent view
- Don't call into the irq chip driver
This is the core equivalent of the X86 workaround and works correctly
because the affinity setting is established in the irq chip when the
interrupt is activated later on.
Note, that this is only effective when hierarchical irq domains are enabled
by the architecture. Doing it unconditionally would break legacy irq chip
implementations.
For hierarchial irq domains this works correctly as none of the drivers can
have a dependency on affinity setting in inactive state by design.
Remove the X86 workaround as it is not longer required.
Fixes: 02edee152d ("x86/apic/vector: Ignore set_affinity call for inactive interrupts")
Reported-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com
Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01cfcde9c2 upstream.
task_h_load() can return 0 in some situations like running stress-ng
mmapfork, which forks thousands of threads, in a sched group on a 224 cores
system. The load balance doesn't handle this correctly because
env->imbalance never decreases and it will stop pulling tasks only after
reaching loop_max, which can be equal to the number of running tasks of
the cfs. Make sure that imbalance will be decreased by at least 1.
misfit task is the other feature that doesn't handle correctly such
situation although it's probably more difficult to face the problem
because of the smaller number of CPUs and running tasks on heterogenous
system.
We can't simply ensure that task_h_load() returns at least one because it
would imply to handle underflow in other places.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: <stable@vger.kernel.org> # v4.4+
Link: https://lkml.kernel.org/r/20200710152426.16981-1-vincent.guittot@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce3614daab upstream.
While integrating rseq into glibc and replacing glibc's sched_getcpu
implementation with rseq, glibc's tests discovered an issue with
incorrect __rseq_abi.cpu_id field value right after the first time
a newly created process issues sched_setaffinity.
For the records, it triggers after building glibc and running tests, and
then issuing:
for x in {1..2000} ; do posix/tst-affinity-static & done
and shows up as:
error: Unexpected CPU 2, expected 0
error: Unexpected CPU 2, expected 0
error: Unexpected CPU 2, expected 0
error: Unexpected CPU 2, expected 0
error: Unexpected CPU 138, expected 0
error: Unexpected CPU 138, expected 0
error: Unexpected CPU 138, expected 0
error: Unexpected CPU 138, expected 0
This is caused by the scheduler invoking __set_task_cpu() directly from
sched_fork() and wake_up_new_task(), thus bypassing rseq_migrate() which
is done by set_task_cpu().
Add the missing rseq_migrate() to both functions. The only other direct
use of __set_task_cpu() is done by init_idle(), which does not involve a
user-space task.
Based on my testing with the glibc test-case, just adding rseq_migrate()
to wake_up_new_task() is sufficient to fix the observed issue. Also add
it to sched_fork() to keep things consistent.
The reason why this never triggered so far with the rseq/basic_test
selftest is unclear.
The current use of sched_getcpu(3) does not typically require it to be
always accurate. However, use of the __rseq_abi.cpu_id field within rseq
critical sections requires it to be accurate. If it is not accurate, it
can cause corruption in the per-cpu data targeted by rseq critical
sections in user-space.
Reported-By: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-By: Florian Weimer <fweimer@redhat.com>
Cc: stable@vger.kernel.org # v4.18+
Link: https://lkml.kernel.org/r/20200707201505.2632-1-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15956689a0 upstream.
Although we zero the upper bits of x0 on entry to the kernel from an
AArch32 task, we do not clear them on the exception return path and can
therefore expose 64-bit sign extended syscall return values to userspace
via interfaces such as the 'perf_regs' ABI, which deal exclusively with
64-bit registers.
Explicitly clear the upper 32 bits of x0 on return from a compat system
call.
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Keno Fischer <keno@juliacomputing.com>
Cc: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac2081cdc4 upstream.
Although the arm64 single-step state machine can be fast-forwarded in
cases where we wish to generate a SIGTRAP without actually executing an
instruction, this has two major limitations outside of simply skipping
an instruction due to emulation.
1. Stepping out of a ptrace signal stop into a signal handler where
SIGTRAP is blocked. Fast-forwarding the stepping state machine in
this case will result in a forced SIGTRAP, with the handler reset to
SIG_DFL.
2. The hardware implicitly fast-forwards the state machine when executing
an SVC instruction for issuing a system call. This can interact badly
with subsequent ptrace stops signalled during the execution of the
system call (e.g. SYSCALL_EXIT or seccomp traps), as they may corrupt
the stepping state by updating the PSTATE for the tracee.
Resolve both of these issues by injecting a pseudo-singlestep exception
on entry to a signal handler and also on return to userspace following a
system call.
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Tested-by: Luis Machado <luis.machado@linaro.org>
Reported-by: Keno Fischer <keno@juliacomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a5a4366ce upstream.
Luis reports that, when reverse debugging with GDB, single-step does not
function as expected on arm64:
| I've noticed, under very specific conditions, that a PTRACE_SINGLESTEP
| request by GDB won't execute the underlying instruction. As a consequence,
| the PC doesn't move, but we return a SIGTRAP just like we would for a
| regular successful PTRACE_SINGLESTEP request.
The underlying problem is that when the CPU register state is restored
as part of a reverse step, the SPSR.SS bit is cleared and so the hardware
single-step state can transition to the "active-pending" state, causing
an unexpected step exception to be taken immediately if a step operation
is attempted.
In hindsight, we probably shouldn't have exposed SPSR.SS in the pstate
accessible by the GPR regset, but it's a bit late for that now. Instead,
simply prevent userspace from configuring the bit to a value which is
inconsistent with the TIF_SINGLESTEP state for the task being traced.
Cc: <stable@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Keno Fischer <keno@juliacomputing.com>
Link: https://lore.kernel.org/r/1eed6d69-d53d-9657-1fc9-c089be07f98c@linaro.org
Reported-by: Luis Machado <luis.machado@linaro.org>
Tested-by: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8995aa3d16 upstream.
On Toradex Colibri VF50 (Vybrid VF5xx) with fsl-edma driver NULL pointer
exception happens occasionally on serial output initiated by login
timeout.
This was reproduced only if kernel was built with significant debugging
options and EDMA driver is used with serial console.
Issue looks like a race condition between interrupt handler
fsl_edma_tx_handler() (called as a result of fsl_edma_xfer_desc()) and
terminating the transfer with fsl_edma_terminate_all().
The fsl_edma_tx_handler() handles interrupt for a transfer with already
freed edesc and idle==true.
The mcf-edma driver shares design and lot of code with fsl-edma. It
looks like being affected by same problem. Fix this pattern the same
way as fix for fsl-edma driver.
Fixes: e7a3ff92ea ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Link: https://lore.kernel.org/r/1591881665-25592-1-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5e5677c42 upstream.
NULL pointer exception happens occasionally on serial output initiated
by login timeout. This was reproduced only if kernel was built with
significant debugging options and EDMA driver is used with serial
console.
col-vf50 login: root
Password:
Login timed out after 60 seconds.
Unable to handle kernel NULL pointer dereference at virtual address 00000044
Internal error: Oops: 5 [#1] ARM
CPU: 0 PID: 157 Comm: login Not tainted 5.7.0-next-20200610-dirty #4
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(fsl_edma_tx_handler) from [<8016eb10>] (__handle_irq_event_percpu+0x64/0x304)
(__handle_irq_event_percpu) from [<8016eddc>] (handle_irq_event_percpu+0x2c/0x7c)
(handle_irq_event_percpu) from [<8016ee64>] (handle_irq_event+0x38/0x5c)
(handle_irq_event) from [<801729e4>] (handle_fasteoi_irq+0xa4/0x160)
(handle_fasteoi_irq) from [<8016ddcc>] (generic_handle_irq+0x34/0x44)
(generic_handle_irq) from [<8016e40c>] (__handle_domain_irq+0x54/0xa8)
(__handle_domain_irq) from [<80508bc8>] (gic_handle_irq+0x4c/0x80)
(gic_handle_irq) from [<80100af0>] (__irq_svc+0x70/0x98)
Exception stack(0x8459fe80 to 0x8459fec8)
fe80: 72286b00 e3359f64 00000001 0000412d a0070013 85c98840 85c98840 a0070013
fea0: 8054e0d4 00000000 00000002 00000000 00000002 8459fed0 8081fbe8 8081fbec
fec0: 60070013 ffffffff
(__irq_svc) from [<8081fbec>] (_raw_spin_unlock_irqrestore+0x30/0x58)
(_raw_spin_unlock_irqrestore) from [<8056cb48>] (uart_flush_buffer+0x88/0xf8)
(uart_flush_buffer) from [<80554e60>] (tty_ldisc_hangup+0x38/0x1ac)
(tty_ldisc_hangup) from [<8054c7f4>] (__tty_hangup+0x158/0x2bc)
(__tty_hangup) from [<80557b90>] (disassociate_ctty.part.1+0x30/0x23c)
(disassociate_ctty.part.1) from [<8011fc18>] (do_exit+0x580/0xba0)
(do_exit) from [<801214f8>] (do_group_exit+0x3c/0xb4)
(do_group_exit) from [<80121580>] (__wake_up_parent+0x0/0x14)
Issue looks like race condition between interrupt handler fsl_edma_tx_handler()
(called as result of fsl_edma_xfer_desc()) and terminating the transfer with
fsl_edma_terminate_all().
The fsl_edma_tx_handler() handles interrupt for a transfer with already freed
edesc and idle==true.
Fixes: d6be34fbd3 ("dma: Add Freescale eDMA engine driver support")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1591877861-28156-2-git-send-email-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b710d27bf7 upstream.
Early secure guest boot hits the below crash while booting with
vcpus numbers aligned with page boundary for PAGE size of 64k
and LPPACA size of 1k i.e 64, 128 etc.
Partition configured for 64 cpus.
CPU maps initialized for 1 thread per core
------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/paca.c:89!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
This is due to the BUG_ON() for shared_lppaca_total_size equal to
shared_lppaca_size. Instead the code should only BUG_ON() if we have
exceeded the total_size, which indicates we've overflowed the array.
Fixes: bd104e6db6 ("powerpc/pseries/svm: Use shared memory for LPPACA structures")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Reword change log to clarify we're fixing not removing the check]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619070113.16696-1-sathnaga@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14b0e83dc4 upstream.
This patch fixes a bug which does not let FAN mode to be changed from
sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always
remain at 0.
This is caused because the device driver handles the result of
"read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The
driver thinks an error has occurred if the (result != 0). This has been
fixed by changing the condition to (result < 0).
Signed-off-by: Vishwas M <vishwas.reddy.vr@gmail.com>
Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com
Fixes: 9df7305b5a ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller")
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cac21b02b upstream.
With the current 8KB stack size there are frequent overflows in a 64-bit
configuration. We may split IRQ stacks off in the future, but this fixes a
number of issues right now.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[Palmer: mention irqstack in the commit text]
Fixes: 7db91e57a0 ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2a71bdea8 upstream.
When an expiration delta falls into the last level of the wheel, that delta
has be compared against the maximum possible delay and reduced to fit in if
necessary.
However instead of comparing the delta against the maximum, the code
compares the actual expiry against the maximum. Then instead of fixing the
delta to fit in, it sets the maximum delta as the expiry value.
This can result in various undesired outcomes, the worst possible one
being a timer expiring 15 days ahead to fire immediately.
Fixes: 500462a9de ("timers: Switch to a non-cascading wheel")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200717140551.29076-2-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30c66fc30e upstream.
When a timer is enqueued with a negative delta (ie: expiry is below
base->clk), it gets added to the wheel as expiring now (base->clk).
Yet the value that gets stored in base->next_expiry, while calling
trigger_dyntick_cpu(), is the initial timer->expires value. The
resulting state becomes:
base->next_expiry < base->clk
On the next timer enqueue, forward_timer_base() may accidentally
rewind base->clk. As a possible outcome, timers may expire way too
early, the worst case being that the highest wheel levels get spuriously
processed again.
To prevent from that, make sure that base->next_expiry doesn't get below
base->clk.
Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200703010657.2302-1-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf12fdf0ab upstream.
While e3a3c3a205 ("UIO: fix uio_pdrv_genirq with device tree but no
interrupt") added support for using uio_pdrv_genirq for devices without
interrupt for device tree platforms, the removal of uio_pdrv in
26dac3c49d ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead")
broke the support for non device tree platforms.
This change fixes this, so that uio_pdrv_genirq can be used without
interrupt on all platforms.
This still leaves the support that uio_pdrv had for custom interrupt
handler lacking, as uio_pdrv_genirq does not handle it (yet).
Fixes: 26dac3c49d ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31070f6cce upstream.
The ioctl encoding for this parameter is a long but the documentation says
it should be an int and the kernel drivers expect it to be an int. If the
fuse driver treats this as a long it might end up scribbling over the stack
of a userspace process that only allocated enough space for an int.
This was previously discussed in [1] and a patch for fuse was proposed in
[2]. From what I can tell the patch in [2] was nacked in favor of adding
new, "fixed" ioctls and using those from userspace. However there is still
no "fixed" version of these ioctls and the fact is that it's sometimes
infeasible to change all userspace to use the new one.
Handling the ioctls specially in the fuse driver seems like the most
pragmatic way for fuse servers to support them without causing crashes in
userspace applications that call them.
[1]: https://lore.kernel.org/linux-fsdevel/20131126200559.GH20559@hall.aurel32.net/T/
[2]: https://sourceforge.net/p/fuse/mailman/message/31771759/
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Fixes: 59efec7b90 ("fuse: implement ioctl support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0189a2d367 upstream.
s_op->remount_fs() is only called from legacy_reconfigure(), which is not
used after being converted to the new API.
Convert to using ->reconfigure(). This restores the previous behavior of
syncing the filesystem and rejecting MS_MANDLOCK on remount.
Fixes: c30da2e981 ("fuse: convert to use the new mount API")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8b20a474c upstream.
The command
mount -o remount -o unknownoption /mnt/fuse
succeeds on kernel versions prior to v5.4 and fails on kernel version at or
after. This is because fuse_parse_param() rejects any unrecognised options
in case of FS_CONTEXT_FOR_RECONFIGURE, just as for FS_CONTEXT_FOR_MOUNT.
This causes a regression in case the fuse filesystem is in fstab, since
remount sends all options found there to the kernel; even ones that are
meant for the initial mount and are consumed by the userspace fuse server.
Fix this by ignoring mount options, just as fuse_remount_fs() did prior to
the conversion to the new API.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Fixes: c30da2e981 ("fuse: convert to use the new mount API")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81a33c1ee9 upstream.
The check if user has changed the overlay file was wrong, causing unneeded
call to ovl_change_flags() including taking f_lock on every file access.
Fixes: d989903058 ("ovl: do not generate duplicate fsnotify events for "fake" path")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 124c2de2c0 upstream.
Decoding a lower directory file handle to overlay path with cold
inode/dentry cache may go as follows:
1. Decode real lower file handle to lower dir path
2. Check if lower dir is indexed (was copied up)
3. If indexed, get the upper dir path from index
4. Lookup upper dir path in overlay
5. If overlay path found, verify that overlay lower is the lower dir
from step 1
On failure to verify step 5 above, user will get an ESTALE error and a
WARN_ON will be printed.
A mismatch in step 5 could be a result of lower directory that was renamed
while overlay was offline, after that lower directory has been copied up
and indexed.
This is a scripted reproducer based on xfstest overlay/052:
# Create lower subdir
create_dirs
create_test_files $lower/lowertestdir/subdir
mount_dirs
# Copy up lower dir and encode lower subdir file handle
touch $SCRATCH_MNT/lowertestdir
test_file_handles $SCRATCH_MNT/lowertestdir/subdir -p -o $tmp.fhandle
# Rename lower dir offline
unmount_dirs
mv $lower/lowertestdir $lower/lowertestdir.new/
mount_dirs
# Attempt to decode lower subdir file handle
test_file_handles $SCRATCH_MNT -p -i $tmp.fhandle
Since this WARN_ON() can be triggered by user we need to relax it.
Fixes: 4b91c30a5a ("ovl: lookup connected ancestor of dir in inode cache")
Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a888db3101 upstream.
Commit 9df085f3c9 ("ovl: relax requirement for non null uuid of lower
fs") relaxed the requirement for non null uuid with single lower layer to
allow enabling index and nfs_export features with single lower squashfs.
Fabian reported a regression in a setup when overlay re-uses an existing
upper layer and re-formats the lower squashfs image. Because squashfs
has no uuid, the origin xattr in upper layer are decoded from the new
lower layer where they may resolve to a wrong origin file and user may
get an ESTALE or EIO error on lookup.
To avoid the reported regression while still allowing the new features
with single lower squashfs, do not allow decoding origin with lower null
uuid unless user opted-in to one of the new features that require
following the lower inode of non-dir upper (index, xino, metacopy).
Reported-by: Fabian <godi.beat@gmx.net>
Link: https://lore.kernel.org/linux-unionfs/32532923.JtPX5UtSzP@fgdesktop/
Fixes: 9df085f3c9 ("ovl: relax requirement for non null uuid of lower fs")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f794db6841 upstream.
Until this commit the mainline kernel version (this version) of the
vboxguest module contained a bug where it defined
VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG using
_IOC(_IOC_READ | _IOC_WRITE, 'V', ...) instead of
_IO(V, ...) as the out of tree VirtualBox upstream version does.
Since the VirtualBox userspace bits are always built against VirtualBox
upstream's headers, this means that so far the mainline kernel version
of the vboxguest module has been failing these 2 ioctls with -ENOTTY.
I guess that VBGL_IOCTL_VMMDEV_REQUEST_BIG is never used causing us to
not hit that one and sofar the vboxguest driver has failed to actually
log any log messages passed it through VBGL_IOCTL_LOG.
This commit changes the VBGL_IOCTL_VMMDEV_REQUEST_BIG and VBGL_IOCTL_LOG
defines to match the out of tree VirtualBox upstream vboxguest version,
while keeping compatibility with the old wrong request defines so as
to not break the kernel ABI in case someone has been using the old
request defines.
Fixes: f6ddd094f5 ("virt: Add vboxguest driver for Virtual Box Guest integration UAPI")
Cc: stable@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200709120858.63928-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d0136f8e7 upstream.
Add PID for CH340 that's found on some ESP8266 dev boards made by
LilyGO. The specific device that contains such serial converter can be
seen here: https://github.com/LilyGO/LILYGO-T-OI.
Apparently, it's a regular CH340, but I've confirmed with others that
also bought this board that the PID found on this device (0x7522)
differs from other devices with the "same" converter (0x7523).
Simply adding its PID to the driver and rebuilding it made it work
as expected.
Signed-off-by: Igor Moura <imphilippini@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c45d04c50 upstream.
This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module)
which allows for controlling multiple UPB compatible devices from Linux
using the standard serial interface.
Based on vendor application source code there are two different models
of USB based PIM devices in addition to a number of RS232 based PIM's.
The vendor UPB application source contains the following USB ID's:
#define USB_PCS_VENDOR_ID 0x04b4
#define USB_PCS_PIM_PRODUCT_ID 0x5500
#define USB_SAI_VENDOR_ID 0x17dd
#define USB_SAI_PIM_PRODUCT_ID 0x5500
The first set of ID's correspond to the PIM variant sold by Powerline
Control Systems while the second corresponds to the Simply Automated
Incorporated PIM. As the product ID for both of these match the default
cypress HID->COM RS232 product ID it assumed that they both use an
internal variant of this HID->COM RS232 converter hardware. However
as the vendor ID for the Simply Automated variant is different we need
to also add it to the cypress_M8 driver so that it is properly
detected.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com
Cc: stable@vger.kernel.org
[ johan: amend VID define entry ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7b931bee7 upstream.
The driver would happily overwrite its write buffer with user data in
256 byte increments due to a removed buffer-space sanity check.
Fixes: 5fcf62b0f1 ("tty: iuu_phoenix: fix locking.")
Cc: stable <stable@vger.kernel.org> # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8778eb0927 upstream.
Add a missing spinlock protection for play_queue, because
the play_queue may be destroyed when the "playback_work"
work func and "f_audio_out_ep_complete" callback func
operate this paly_queue at the same time.
Fixes: c6994e6f06 ("USB: gadget: add USB Audio Gadget driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 211f083473 upstream.
clang static analysis flags this error
c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc]
usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
^~~~~~~~~~~~
Problem happens in this block of code
c67x00_release_urb(c67x00, urb);
usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb);
spin_unlock(&c67x00->lock);
usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);
In the call to c67x00_release_urb has this freeing of urbp
urbp = urb->hcpriv;
urb->hcpriv = NULL;
list_del(&urbp->hep_node);
kfree(urbp);
And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd
parameter.
Since all is required is the status, pass the status directly as is
done in c64x00_urb_dequeue
Fixes: e9b29ffc51 ("USB: add Cypress c67x00 OTG controller HCD driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200708131243.24336-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b7e5208a9 upstream.
USB MIDI driver has an error recovery mechanism to resubmit the URB in
the delayed timer handler, and this may race with the standard start /
stop operations. Although both start and stop operations themselves
don't race with each other due to the umidi->mutex protection, but
this isn't applied to the timer handler.
For fixing this potential race, the following changes are applied:
- Since the timer handler can't use the mutex, we apply the
umidi->disc_lock protection at each input stream URB submission;
this also needs to change the GFP flag to GFP_ATOMIC
- Add a check of the URB refcount and skip if already submitted
- Move the timer cancel call at disconnection to the beginning of the
procedure; this assures the in-flight timer handler is gone properly
before killing all pending URBs
Reported-by: syzbot+0f4ecfe6a2c322c81728@syzkaller.appspotmail.com
Reported-by: syzbot+5f1d24c49c1d2c427497@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200710160656.16819-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e13762abf3 upstream.
These messages appear each time the mouse wakes from sleep, in my case
(Logitech M705), every minute or so.
Let's downgrade them to the "debug" level so they don't fill the kernel log
by default.
While we are at it, let's make clear that this is a wheel multiplier (and
not, for example, XY movement multiplier).
Fixes: 4435ff2f09 ("HID: logitech: Enable high-resolution scrolling on Logitech mice")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c27075772d upstream.
In a previous fix, I changed the condition on which the timeout of an
IRQ is reached from:
if (!ret)
into:
if (ret && !pending)
While having a non-zero return code is usual in the Linux kernel, here
ret comes from a wait_for_completion_timeout() which returns 0 when
the waiting period is too long.
Hence, the revised condition should be:
if (!ret && !pending)
The faulty patch did not produce any error because of the !pending
condition so this change is finally purely cosmetic and does not
change the actual driver behavior.
Fixes: cafb56dd74 ("mtd: rawnand: marvell: prevent timeouts on a loaded machine")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200424164501.26719-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38427e5a47 upstream.
When there are more than one WAKE TCS available and there is no dedicated
ACTIVE TCS available, invalidating all WAKE TCSes and waiting for current
transfer to complete in first WAKE TCS blocks using another free WAKE TCS
to complete current request.
Remove rpmh_rsc_invalidate() to happen from tcs_write() when WAKE TCSes
is re-purposed to be used for Active mode. Clear only currently used
WAKE TCS's register configuration.
Fixes: 2de4b8d33e (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-7-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15b3bf61b8 upstream.
For RSCs that have sleep & wake TCS but no dedicated active TCS, wake
TCS can be re-purposed to send active requests. Once the active requests
are sent and response is received, the active mode configuration needs
to be cleared so that controller can use wake TCS for sending wake
requests.
Introduce enable_tcs_irq() to enable completion IRQ for repurposed TCSes.
Fixes: 2de4b8d33e (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
[mkshah: call enable_tcs_irq() within drv->lock, update commit message]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-6-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb7000677a upstream.
Currently rpmh ctrlr dirty flag is set for all cases regardless of data
is really changed or not. Add changes to update dirty flag when data is
changed to newer values. Update dirty flag everytime when data in batch
cache is updated since rpmh_flush() may get invoked from any CPU instead
of only last CPU going to low power mode.
Also move dirty flag updates to happen from within cache_lock and remove
unnecessary INIT_LIST_HEAD() call and a default case from switch.
Fixes: 600513dfee ("drivers: qcom: rpmh: cache sleep/wake state requests")
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1586703004-13674-3-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3aaf08670 upstream.
26ad34d510 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports") added
the struct pci_platform_pm_ops.bridge_d3() function pointer and
platform_pci_bridge_d3() to use it.
The .bridge_d3() op is implemented by acpi_pci_platform_pm, but not by
mid_pci_platform_pm. We don't expect platform_pci_bridge_d3() to be called
on Intel MID platforms, but nothing in the code itself would prevent that.
Check the .bridge_d3() pointer for NULL before calling it.
Fixes: 26ad34d510 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c27c6bd2c4 upstream.
Currently it is possible to specify a state machine table with 0 length,
this is not valid as optional tables are specified by not defining
the table as present. Further this allows by-passing the base tables
range check against the next/check tables.
Fixes: d901d6a298 ("apparmor: dfa split verification of table headers")
Reported-by: Mike Salvatore <mike.salvatore@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5714ee50bb upstream.
This fixes a regression encountered while running the
gdb.base/corefile.exp test in GDB's test suite.
In my testing, the typo prevented the sw_reserved field of struct
fxregs_state from being output to the kernel XSAVES area. Thus the
correct mask corresponding to XCR0 was not present in the core file for
GDB to interrogate, resulting in the following behavior:
[kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core
Reading symbols from testsuite/outputs/gdb.base/corefile/corefile...
[New LWP 232880]
warning: Unexpected size of section `.reg-xstate/232880' in core file.
With the typo fixed, the test works again as expected.
Signed-off-by: Kevin Buettner <kevinb@redhat.com>
Fixes: 9e46365459 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 299632e54b ]
If a regmap has "fast_io" set then its lock function uses a spinlock.
That doesn't work so well with the functions:
* regmap_cache_only_write_file()
* regmap_cache_bypass_write_file()
Both of the above functions have the pattern:
1. Lock the regmap.
2. Call:
debugfs_write_file_bool()
copy_from_user()
__might_fault()
__might_sleep()
Let's reorder things a bit so that we do all of our sleepable
functions before we grab the lock.
Fixes: d3dc5430d6 ("regmap: debugfs: Allow writes to cache state settings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200715164611.1.I35b3533e8a80efde0cec1cc70f71e1e74b2fa0da@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cbba1f911 ]
Fix to return negative error code -ENOMEM from kmalloc() error handling
case instead of 0, as done elsewhere in this function.
Fixes: f1774cb895 ("X.509: parse public key parameters from x509 for akcipher")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 912288442c ]
Currently the header size calculations are using an assignment
operator instead of a += operator when accumulating the header
size leading to incorrect sizes. Fix this by using the correct
operator.
Addresses-Coverity: ("Unused value")
Fixes: 302d3deb20 ("xprtrdma: Prevent inline overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a4117df9b ]
Got following d_can probe errors with kernel 5.8-rc1 on am437x
[ 10.730822] CAN device driver interface
Starting Wait for Network to be Configured...
[ OK ] Reached target Network.
[ 10.787363] c_can_platform 481cc000.can: probe failed
[ 10.792484] c_can_platform: probe of 481cc000.can failed with error -2
[ 10.799457] c_can_platform 481d0000.can: probe failed
[ 10.804617] c_can_platform: probe of 481d0000.can failed with error -2
actually, Tony has fixed this issue on am335x with the patch [3]
Since am437x has the same clock structure with am335x
[1][2], so reuse the code from Tony Lindgren's patch [3] to fix it.
[1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
Integration
[2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
Integration
[3]: commit 516f1117d0 ("ARM: dts: Configure osc clock for d_can on
am335x")
Fixes: 1a5cd7c23c ("bus: ti-sysc: Enable all clocks directly during init to read revision")
Signed-off-by: dillon min <dillon.minfei@gmail.com>
[tony@atomide.com: aligned commit message a bit for readability]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7779b047a5 ]
fuse_writepages() ignores some errors taken from fuse_writepages_fill() I
believe it is a bug: if .writepages is called with WB_SYNC_ALL it should
either guarantee that all data was successfully saved or return error.
Fixes: 26d614df1d ("fuse: Implement writepages callback")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 913fadc5b1 ]
We used to do this before 3453d5708b, but this was changed to better
handle the NFS4ERR_SEQ_MISORDERED error code. This commit fixed the slot
re-use case when the server doesn't receive the interrupted operation,
but if the server does receive the operation then it could still end up
replying to the client with mis-matched operations from the reply cache.
We can fix this by sending a SEQUENCE to the server while recovering from
a SEQ_MISORDERED error when we detect that we are in an interrupted slot
situation.
Fixes: 3453d5708b (NFSv4.1: Avoid false retries when RPC calls are interrupted)
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e3709d7e3 ]
When building arm32 allmodconfig:
ld.lld: error: undefined symbol: ap_cp_unique_name
>>> referenced by ap-cpu-clk.c
>>> clk/mvebu/ap-cpu-clk.o:(ap_cpu_clock_probe) in archive drivers/built-in.a
ap_cp_unique_name is only compiled into the kernel image when
CONFIG_ARMADA_AP_CP_HELPER is selected (as it is not user selectable).
However, CONFIG_ARMADA_AP_CPU_CLK does not select it.
This has been a problem since the driver was added to the kernel but it
was not built before commit c318ea261749 ("cpufreq: ap806: fix cpufreq
driver needs ap cpu clk") so it was never noticed.
Fixes: f756e362d9 ("clk: mvebu: add CPU clock driver for Armada 7K/8K")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200701201128.2448427-1-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30517ffeb3 ]
Fixed commit moved the assignment of 'req', but did not update a
reference in the DBG() call. Use the argument as it was renamed.
Fixes: 5fb694f96e ("usb: gadget: udc: atmel: fix possible oops when unloading module")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed7815db70 ]
A SPI transfer defines the _maximum_ speed of the SPI transfer. However the
driver doesn't take into account that the clock divider is always rounded down
(due to integer arithmetics). This results in a too high clock rate for the SPI
transfer.
E.g.: with a mclk_rate of 24 MHz and a SPI transfer speed of 10 MHz, the
original code calculates a reg of "0", which results in a effective divider of
"2" and a 12 MHz clock for the SPI transfer.
This patch fixes the issue by using DIV_ROUND_UP() instead of a plain
integer division.
While there simplify the divider calculation for the CDR1 case, use
order_base_2() instead of two ilog2() calculations.
Fixes: 3558fe900e ("spi: sunxi: Add Allwinner A31 SPI controller driver")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200706143443.9855-2-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0536f9826 ]
If 'ad7780_init_gpios()' fails, we must not release some resources that
have not been allocated yet. Return directly instead.
Fixes: 5bb30e7daf ("staging: iio: ad7780: move regulator to after GPIO init")
Fixes: 9085daa4ab ("staging: iio: ad7780: add gain & filter gpio support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a55de41222 ]
If we have "ti,no-idle" specified for a module we must not disable
the the module on suspend to keep things backwards compatible.
Fixes: 386cb76681 ("bus: ti-sysc: Handle missed no-idle property in addition to no-idle-on-init")
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afe6f1eeb0 ]
With CONFIG_DEBUG_ATOMIC_SLEEP enabled we can see the following with RTC probe:
BUG: sleeping function called from invalid context at drivers/bus/ti-sysc.c:1736
...
(sysc_quirk_rtc) from [<c060d01c>] (sysc_write_sysconfig+0x1c/0x60)
(sysc_write_sysconfig) from [<c060d9f4>] (sysc_enable_module+0x11c/0x274)
(sysc_enable_module) from [<c060f37c>] (sysc_probe+0xe9c/0x1380)
(sysc_probe) from [<c06e9384>] (platform_drv_probe+0x48/0x98)
Fixes: e8639e1c98 ("bus: ti-sysc: Handle module unlock quirk needed for some RTC")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f91139250 ]
With CONFIG_DEBUG_ATOMIC_SLEEP enabled we can see the following with
wakeirqs and serial console idled:
BUG: sleeping function called from invalid context at drivers/bus/ti-sysc.c:242
...
(sysc_wait_softreset) from [<c0606894>] (sysc_enable_module+0x48/0x274)
(sysc_enable_module) from [<c0606c5c>] (sysc_runtime_resume+0x19c/0x1d8)
(sysc_runtime_resume) from [<c0606cf0>] (sysc_child_runtime_resume+0x58/0x84)
(sysc_child_runtime_resume) from [<c06eb7bc>] (__rpm_callback+0x30/0x12c)
(__rpm_callback) from [<c06eb8d8>] (rpm_callback+0x20/0x80)
(rpm_callback) from [<c06eb434>] (rpm_resume+0x638/0x7fc)
(rpm_resume) from [<c06eb658>] (__pm_runtime_resume+0x60/0x9c)
(__pm_runtime_resume) from [<c06edc08>] (handle_threaded_wake_irq+0x24/0x60)
(handle_threaded_wake_irq) from [<c01befec>] (irq_thread_fn+0x1c/0x78)
(irq_thread_fn) from [<c01bf30c>] (irq_thread+0x140/0x26c)
We have __pm_runtime_resume() call the sysc_runtime_resume() with spinlock
held and interrupts disabled.
Fixes: d46f9fbec7 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2037dafcf ]
When starting at 744MHz, the Mali 450 core crashes on S805X based boards:
lima d00c0000.gpu: IRQ ppmmu3 not found
lima d00c0000.gpu: IRQ ppmmu4 not found
lima d00c0000.gpu: IRQ ppmmu5 not found
lima d00c0000.gpu: IRQ ppmmu6 not found
lima d00c0000.gpu: IRQ ppmmu7 not found
Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.2+ #492
Hardware name: Libre Computer AML-S805X-AC (DT)
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : lima_gp_init+0x28/0x188
...
Call trace:
lima_gp_init+0x28/0x188
lima_device_init+0x334/0x534
lima_pdev_probe+0xa4/0xe4
...
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Reverting to a safer 666Mhz frequency on the S805X that doesn't use the
GP0 PLL makes it more stable.
Fixes: fd47716479 ("ARM64: dts: add S805X based P241 board")
Fixes: 0449b8e371 ("arm64: dts: meson: add libretech aml-s805x-ac board")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200618132737.14243-1-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38b1927e5b ]
Currently pointer phy0 is being dereferenced via the assignment of
phy on the call to phy_get_drvdata before phy0 is null checked, this
can lead to a null pointer dereference. Fix this by performing the
null check on phy0 before the call to phy_get_drvdata. Also replace
the phy0 == NULL check with the more usual !phy0 idiom.
Addresses-Coverity: ("Dereference before null check")
Fixes: e6f32efb1b ("phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200625124428.83564-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 466257d996 ]
A client driver (renesas_usbhs) assumed that
dmaengine_tx_status() could return the residue even if
the transfer was completed. However, this was not correct
usage [1] and this caused to break getting the residue after
the commit 24461d9792 ("dmaengine: virt-dma: Fix access after
free in vchan_complete()") actually. So, this is possible to get
wrong received size if the usb controller gets a short packet.
For example, g_zero driver causes "bad OUT byte" errors.
To use the tx_result from the renesas_usbhs driver when
the transfer is completed, set the tx_result parameters.
Notes that the renesas_usbhs driver needs to update for it.
[1]
https://lore.kernel.org/dmaengine/20200616165550.GP2324254@vkoul-mobl/
Reported-by: Hien Dang <hien.dang.eb@renesas.com>
Fixes: 24461d9792 ("dmaengine: virt-dma: Fix access after free in vchan_complete()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1592482053-19433-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f88ecccac4 ]
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 40 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
Fixes: 87aec56e27 ("iio: health: Add driver for the TI AFE4404 heart monitor")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d46f9fbec7 ]
Some modules reset automatically when idled, and when re-enabled, we must
wait for the automatic OCP softreset to complete. And if optional clocks
are configured, we need to keep the clocks on while waiting for the reset
to complete.
Let's fix the issue by moving the OCP softreset code to a separate
function sysc_wait_softreset(), and call it also from sysc_enable_module()
with the optional clocks enabled.
This is based on what we're already doing for legacy platform data booting
in _enable_sysc().
Fixes: 7324a7a0d5 ("bus: ti-sysc: Implement display subsystem reset quirk")
Reported-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c41c36e900 ]
Currently, changing the brightness of the internal display of the Acer
TravelMate 5735Z does not work. Pressing the function keys or changing the
slider, GNOME Shell 3.36.2 displays the OSD (five steps), but the
brightness does not change.
The Acer TravelMate 5735Z shipped with Windows 7 and as such does not
trigger our "win8 ready" heuristic for preferring the native backlight
interface.
Still ACPI backlight control doesn't work on this model, where as the
native (intel_video) backlight interface does work by adding
`acpi_backlight=native` or `acpi_backlight=none` to Linux’ command line.
So, add a quirk to force using native backlight control on this model.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207835
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7842087b01 ]
MMS345L is another first generation touch screen from Melfas,
which uses mostly the same registers as MMS152.
However, there is some garbage printed during initialization.
Apparently MMS345L does not have the MMS152_COMPAT_GROUP register
that is read+printed during initialization.
TSP FW Rev: bootloader 0x6 / core 0x26 / config 0x26, Compat group: \x06
On earlier kernel versions the compat group was actually printed as
an ASCII control character, seems like it gets escaped now.
But we probably shouldn't print something from a random register.
Add a separate "melfas,mms345l" compatible that avoids reading
from the MMS152_COMPAT_GROUP register. This might also help in case
there is some other device-specific quirk in the future.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://lore.kernel.org/r/20200423102431.2715-1-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f4ea2074d ]
Force it to use asynchronous playback.
Same quirk has already been added for Focusrite Scarlett Solo (2nd gen)
with a commit 46f5710f0b ("ALSA: usb-audio: Add quirk for Focusrite
Scarlett Solo").
This also seems to prevent regular clicks when playing at 44100Hz
on Scarlett 2i2 (2nd gen). I did not notice any side effects.
Moved both quirks to snd_usb_audioformat_attributes_quirk() as suggested.
Signed-off-by: Gregor Pintar <grpintar@gmail.com>
Reviewed-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200420214030.2361-1-grpintar@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c8fbc1f9b ]
The Acer Aspire 5783z shipped with Windows 7 and as such does not trigger
our "win8 ready" heuristic for prefering the native backlight interface.
Still ACPI backlight control doesn't work on this model, where as the
native (intel_video) backlight interface does work. Add a quirk to
force using native backlight control on this model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dd5ddc125 ]
The touchscreen on the Cube I15-TC don't match the default display,
with 0,0 touches being reported when touching at the top-right of
the screen.
Add a quirk to invert the x coordinate.
Reported-and-tested-by: Arkadiy <arkan49@yandex.ru>
Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2edb84e304 ]
MicroBook IIc operates in UAC2 mode by default. This patch addresses
several issues with it:
- MicroBook II and IIc shares the same USB ID. We can distinguish them
by interface class.
- MaxPacketsOnly attribute is erroneously set in endpoint descriptors.
As a result this card produces noise with all sample rates other than
96 KHz. This also causes issues like IOMMU page faults and other
problems with host controller.
- Sample rate changes takes more than 2 seconds for this device. Clock
validity request returns false during that period, so the clock validity
quirk is required.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200229151815.14199-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25bfaaa73c ]
In order to probe EDMA with ti-sysc interconnect target module and with
device tree data, we need to properly detect EDMA and set the flags for
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY for tptc.
We have these flags currently set for am4 and dra7, but not for am335x.
Let's set them for all the SoCs as the tptc module should behave the
same for all of them. It's likely that am335x was never tested to idle
EDMA tptc.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77dfece2e6 ]
In order to prepare probing display subsystem (DSS) with ti-sysc
interconnect target module driver and device tree data, let's
detect DSS related modules.
We need to also add reset quirk handling for DSS, but until that's
done, let's just enable the optional clock quirks for DSS and
omap4 HDMI. The rest is just naming of modules if CONFIG_DEBUG
is set.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8639e1c98 ]
The RTC modules on am3 and am4 need quirk handling to unlock and lock
them for reset so let's add the quirk handling based on what we already
have for legacy platform data. In later patches we will simply drop the
RTC related platform data and the old quirk handling.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 590e15c76f ]
We are currently setting -1 for non-existing sysconfig related registers
for quirks, but setting -ENODEV elsewhere. And for matching the quirks,
we're now just ignoring the non-existing registers. This will cause issues
with misdetecting DSS registers as the hardware revision numbers can have
duplicates.
To avoid this, let's standardize on using -ENODEV also for the quirks
instead of -1. That way we can always just test for a match without adding
any more complicated logic.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e64c021fd9 ]
The clk_disable_quirk and clk_enable_quirk should really be called
pre_reset_quirk and post_reset_quirk to avoid confusion like we had
with hdq1w reset.
Let's also rename the related functions so the code is easier to follow.
Note that we also have reset_done_quirk that is needed in some cases
after checking the separate register for reset done bit.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 679b2ec8e0 ]
This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.
The logic behind the quirks is always built into the sr driver.
This also removes the config from all the defconfig files that are enabling
this already.
Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3045696d0c ]
The ITE 8595 chip used in various 2-in-1 keyboard docks works fine with
the hid-generic driver (minus the RF_KILL key) and also keeps working fine
when swapping drivers, so there is no need to have it in the
hid_have_special_driver list.
Note the other 2 USB ids in hid-ite.c were never added to
hid_have_special_driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2253ed4b36 ]
For the ux500v2 variant of the PL18x block, any block sizes
are supported. This is necessary to support some SDIO
transfers. This also affects the QCOM MMCI variant and the
ST micro variant.
For Ux500 an additional quirk only allowing DMA on blocks
that are a power of two is needed. This might be a bug in
the DMA engine (DMA40) or the MMCI or in the interconnect,
but the most likely is the MMCI, as transfers of these
sizes work fine for other devices using the same DMA
engine. DMA works fine also with SDIO as long as the
blocksize is a power of 2.
This patch has proven necessary for enabling SDIO for WLAN on
PostmarketOS-based Ux500 platforms.
What we managed to test in practice is Broadcom WiFi over
SDIO on the Ux500 based Samsung GT-I8190 and GT-S7710.
This WiFi chip, BCM4334 works fine after the patch.
Before this patch:
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4334-sdio
for chip BCM4334/3
mmci-pl18x 80118000.sdi1_per2: unsupported block size (60 bytes)
brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed
brcmfmac: brcmf_sdio_download_code_file: error -22 on writing
434236 membytes at 0x00000000
brcmfmac: brcmf_sdio_download_firmware: dongle image file download
failed
After this patch:
brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4334/3 wl0:
Nov 21 2012 00:21:28 version 6.10.58.813 (B2) FWID 01-0
Bringing up networks, discovering networks with "iw dev wlan0 scan"
and connecting works fine from this point.
This patch is inspired by Ulf Hansson's patch
http://www.spinics.net/lists/linux-mmc/msg12160.html
As the DMA engines on these platforms may now get block sizes
they were not used to before, make sure to also respect if
the DMA engine says "no" to a transfer.
Make a drive-by fix for datactrl_blocksz, misspelled.
Cc: Ludovic Barre <ludovic.barre@st.com>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191217143952.2885-1-linus.walleij@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4601832f40 ]
The IPU1 MMU has been using common IOMMU pdata quirks defined and
used by all IPU IOMMU devices on OMAP4 and beyond. Separate out the
pdata for IPU1 MMU with the additional .set_pwrdm_constraint ops
plugged in, so that the IPU1 power domain can be restricted to ON
state during the boot and active period of the IPU1 remote processor.
This eliminates the pre-conditions for the IPU1 boot issue as
described in commit afe518400bdb ("iommu/omap: fix boot issue on
remoteprocs with AMMU/Unicache").
NOTE:
1. RET is not a valid target power domain state on DRA7 platforms,
and IPU power domain is normally programmed for OFF. The IPU1
still fails to boot though, and an unclearable l3_noc error is
thrown currently on 4.14 kernel without this fix. This behavior
is slightly different from previous 4.9 LTS kernel.
2. The fix is currently applied only to IPU1 on DRA7xx SoC, as the
other affected processors on OMAP4/OMAP5/DRA7 are in domains
that are not entering RET. IPU2 on DRA7 is in CORE power domain
which is only programmed for ON power state. The fix can be easily
scaled if these domains do hit RET in the future.
3. The issue was not seen on current DRA7 platforms if any of the
DSP remote processors were booted and using one of the GPTimers
5, 6, 7 or 8 on previous 4.9 LTS kernel. This was due to the
errata fix for i874 implemented in commit 1cbabcb980 ("ARM:
DRA7: clockdomain: Implement timer workaround for errata i874")
which keeps the IPU1 power domain from entering RET when the
timers are active. But the timer workaround did not make any
difference on 4.14 kernel, and an l3_noc error was seen still
without this fix.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f14101a1d ]
Errata Title:
i879: DSP MStandby requires CD_EMU in SW_WKUP
Description:
The DSP requires the internal emulation clock to be actively toggling
in order to successfully enter a low power mode via execution of the
IDLE instruction and PRCM MStandby/Idle handshake. This assumes that
other prerequisites and software sequence are followed.
Workaround:
The emulation clock to the DSP is free-running anytime CCS is connected
via JTAG debugger to the DSP subsystem or when the CD_EMU clock domain
is set in SW_WKUP mode. The CD_EMU domain can be set in SW_WKUP mode
via the CM_EMU_CLKSTCTRL [1:0]CLKTRCTRL field.
Implementation:
This patch implements this workaround by denying the HW_AUTO mode
for the EMU clockdomain during the power-up of any DSP processor
and re-enabling the HW_AUTO mode during the shutdown of the last
DSP processor (actually done during the enabling and disabling of
the respective DSP MDMA MMUs). Reference counting has to be used to
manage the independent sequencing between the multiple DSP processors.
This switching is done at runtime rather than a static clockdomain
flags value to meet the target power domain state for the EMU power
domain during suspend.
Note that the DSP MStandby behavior is not consistent across all
boards prior to this fix. Please see commit 45f871eec6c0 ("ARM:
OMAP2+: Extend DRA7 IPU1 MMU pdata quirks to DSP MDMA MMUs") for
details.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4c4b540e1 ]
IOMMU driver will be using ti-sysc bus driver for power management control
going forward, and the pdata quirks are not needed for anything anymore.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0eae33b25 ]
Marc Micalizzi reports that Huawei MA5671A and Alcatel/Lucent G-010S-P
modules are capable of 2500base-X, but incorrectly report their
capabilities in the EEPROM. It seems rather common that GPON modules
mis-report.
Let's fix these modules by adding some quirks.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 57a1cd87ef.
Eugeniu Rosca writes:
On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote:
>After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform:
>Set PM runtime as active on resume") into downstream v4.14.x, we started
>to consistently experience below panic [1] on every second s2ram of
>R-Car H3 Salvator-X Renesas reference board.
>
>After some investigations, we concluded the following:
> - the issue does not exist in vanilla v5.8-rc4+
> - [bisecting shows that] the panic on v4.14.186 is caused by the lack
> of v5.6-rc1 commit 987351e1ea ("phy: core: Add consumer device
> link support"). Getting evidence for that is easy. Reverting
> 987351e1ea in vanilla leads to a similar backtrace [2].
>
>Questions:
> - Backporting 987351e1ea ("phy: core: Add consumer device
> link support") to v4.14.187 looks challenging enough, so probably not
> worth it. Anybody to contradict this?
> - Assuming no plans to backport the missing mainline commit to v4.14.x,
> should the following three v4.14.186 commits be reverted on v4.14.x?
> * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating")
> * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume")
> * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 335d720bb4.
Eugeniu Rosca writes:
On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote:
>After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform:
>Set PM runtime as active on resume") into downstream v4.14.x, we started
>to consistently experience below panic [1] on every second s2ram of
>R-Car H3 Salvator-X Renesas reference board.
>
>After some investigations, we concluded the following:
> - the issue does not exist in vanilla v5.8-rc4+
> - [bisecting shows that] the panic on v4.14.186 is caused by the lack
> of v5.6-rc1 commit 987351e1ea ("phy: core: Add consumer device
> link support"). Getting evidence for that is easy. Reverting
> 987351e1ea in vanilla leads to a similar backtrace [2].
>
>Questions:
> - Backporting 987351e1ea ("phy: core: Add consumer device
> link support") to v4.14.187 looks challenging enough, so probably not
> worth it. Anybody to contradict this?
> - Assuming no plans to backport the missing mainline commit to v4.14.x,
> should the following three v4.14.186 commits be reverted on v4.14.x?
> * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating")
> * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume")
> * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit fbf719e5da.
Eugeniu Rosca writes:
On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote:
>After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform:
>Set PM runtime as active on resume") into downstream v4.14.x, we started
>to consistently experience below panic [1] on every second s2ram of
>R-Car H3 Salvator-X Renesas reference board.
>
>After some investigations, we concluded the following:
> - the issue does not exist in vanilla v5.8-rc4+
> - [bisecting shows that] the panic on v4.14.186 is caused by the lack
> of v5.6-rc1 commit 987351e1ea ("phy: core: Add consumer device
> link support"). Getting evidence for that is easy. Reverting
> 987351e1ea in vanilla leads to a similar backtrace [2].
>
>Questions:
> - Backporting 987351e1ea ("phy: core: Add consumer device
> link support") to v4.14.187 looks challenging enough, so probably not
> worth it. Anybody to contradict this?
> - Assuming no plans to backport the missing mainline commit to v4.14.x,
> should the following three v4.14.186 commits be reverted on v4.14.x?
> * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating")
> * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume")
> * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41c2b6b4f0 ]
When writing the serdes configuration register was moved to
mvneta_config_interface() the whole code block was removed from
mvneta_port_power_up() in the assumption that its only purpose was to
write the serdes configuration register. As mentioned by Russell King
its purpose was also to check for valid interface modes early so that
later in the driver we do not have to care for unexpected interface
modes.
Add back the test to let the driver bail out early on unhandled
interface modes.
Fixes: b4748553f5 ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3d239dcb8 ]
In mvneta_config_interface() the RGMII modes are catched by the default
case which is an error return. The RGMII modes are valid modes for the
driver, so instead of returning an error add a break statement to return
successfully.
This avoids this warning for non comphy SoCs which use RGMII, like
SolidRun Clearfog:
WARNING: CPU: 0 PID: 268 at drivers/net/ethernet/marvell/mvneta.c:3512 mvneta_start_dev+0x220/0x23c
Fixes: b4748553f5 ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a8d7f126c ]
Commit 209c65b61d ("drivers/of/of_mdio.c:fix of_mdiobus_register()")
introduced a break of the loop on the premise that a successful
registration should exit the loop. The premise is correct but not to
code, because rc && rc != -ENODEV is just a special error condition,
that means we would exit the loop even with rc == -ENODEV which is
absolutely not correct since this is the error code to indicate to the
MDIO bus layer that scanning should continue.
Fix this by explicitly checking for rc = 0 as the only valid condition
to break out of the loop.
Fixes: 209c65b61d ("drivers/of/of_mdio.c:fix of_mdiobus_register()")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3f9c6d3879 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 32 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
Fixes: eec96d1e2d ("iio: health: Add driver for the TI AFE4403 heart monitor")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8db4afe163 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
Here there is no data leak possibility so use an explicit structure
on the stack to ensure alignment and nice readable fashion.
The forced alignment of ts isn't strictly necessary in this driver
as the padding will be correct anyway (there isn't any). However
it is probably less fragile to have it there and it acts as
documentation of the requirement.
Fixes: 713bbb4efb ("iio: pressure: ms5611: Add triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c49056ad9 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc so no data can leak
apart from previous readings.
Explicit alignment of ts needed to ensure consistent padding
on all architectures (particularly x86_32 with it's 4 byte alignment
of s64)
Fixes: e4a70e3e7d ("iio: humidity: add support to hts221 rh/temp combo device")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7369ae1f4 upstream.
The function iio_device_register() was called in mma8452_probe().
But the function iio_device_unregister() was not called after
a call of the function mma8452_set_freefall_mode() failed.
Thus add the missed function call for one error case.
Fixes: 1a965d405f ("drivers:iio:accel:mma8452: added cleanup provision in case of failure.")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0187294d22 upstream.
When devm_regmap_init_i2c() returns an error code, a pairing
runtime PM usage counter decrement is needed to keep the
counter balanced. For error paths after ak8974_set_power(),
ak8974_detect() and ak8974_reset(), things are the same.
However, When iio_triggered_buffer_setup() returns an error
code, there will be two PM usgae counter decrements.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Fixes: 7c94a8b2ee ("iio: magn: add a driver for AK8974")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea5e7a7bb6 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc so no data can leak apart
from previous readings.
Fixes: 16bf793f86 ("iio: humidity: hdc100x: add triggered buffer support for HDC100X")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 838e00b13b upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc so no data can leak appart from
previous readings.
Fixes: 7c94a8b2ee ("iio: magn: add a driver for AK8974")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5679b28142 ]
Commit f7b93d4294 ("arm64/alternatives: use subsections for replacement
sequences") moved the alternatives replacement sequences into subsections,
in order to keep the as close as possible to the code that they replace.
Unfortunately, this broke the logic in branch_insn_requires_update,
which assumed that any branch into kernel executable code was a branch
that required updating, which is no longer the case now that the code
sequences that are patched in are in the same section as the patch site
itself.
So the only way to discriminate branches that require updating and ones
that don't is to check whether the branch targets the replacement sequence
itself, and so we can drop the call to kernel_text_address() entirely.
Fixes: f7b93d4294 ("arm64/alternatives: use subsections for replacement sequences")
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20200709125953.30918-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f90786b31 ]
The driver can't be loaded automatically because it misses
module alias to be provided. Add corresponding MODULE_DEVICE_TABLE()
call to the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b780cc615b ]
Before this patch, only read-write mounts would grab the freeze
glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze
glock was never initialized. That meant requests to freeze, which
request the glock in EX, were granted without any state transition.
That meant you could mount a gfs2 file system, which is currently
frozen on a different cluster node, in read-only mode.
This patch makes read-only mounts lock the freeze glock in SH mode,
which will block for file systems that are frozen on another node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccf6fb858e ]
Found by smatch:
drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn:
variable dereferenced before check 'chip->ops' (see line 979)
'chip->ops' is assigned in the beginning of function
in tpmm_chip_alloc->tpm_chip_alloc
and is used before first possible goto to error path.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7b93d4294 ]
When building very large kernels, the logic that emits replacement
sequences for alternatives fails when relative branches are present
in the code that is emitted into the .altinstr_replacement section
and patched in at the original site and fixed up. The reason is that
the linker will insert veneers if relative branches go out of range,
and due to the relative distance of the .altinstr_replacement from
the .text section where its branch targets usually live, veneers
may be emitted at the end of the .altinstr_replacement section, with
the relative branches in the sequence pointed at the veneers instead
of the actual target.
The alternatives patching logic will attempt to fix up the branch to
point to its original target, which will be the veneer in this case,
but given that the patch site is likely to be far away as well, it
will be out of range and so patching will fail. There are other cases
where these veneers are problematic, e.g., when the target of the
branch is in .text while the patch site is in .init.text, in which
case putting the replacement sequence inside .text may not help either.
So let's use subsections to emit the replacement code as closely as
possible to the patch site, to ensure that veneers are only likely to
be emitted if they are required at the patch site as well, in which
case they will be in range for the replacement sequence both before
and after it is transported to the patch site.
This will prevent alternative sequences in non-init code from being
released from memory after boot, but this is tolerable given that the
entire section is only 512 KB on an allyesconfig build (which weighs in
at 500+ MB for the entire Image). Also, note that modules today carry
the replacement sequences in non-init sections as well, and any of
those that target init code will be emitted into init sections after
this change.
This fixes an early crash when booting an allyesconfig kernel on a
system where any of the alternatives sequences containing relative
branches are activated at boot (e.g., ARM64_HAS_PAN on TX2)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Dave P Martin <dave.martin@arm.com>
Link: https://lore.kernel.org/r/20200630081921.13443-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c43e55796d ]
After pulling 5.7.0 (linux-next merge), mcf5441x mmu boot was
hanging silently.
memblock_add() seems not appropriate, since using MAX_NUMNODES
as node id, while memblock_add_node() sets up memory for node id 0.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d63bd8c81d ]
The m68k nommu setup code didn't register the beginning of the physical
memory with memblock because it was anyway occupied by the kernel. However,
commit fa3354e4ea ("mm: free_area_init: use maximal zone PFNs rather than
zone sizes") changed zones initialization to use memblock.memory to detect
the zone extents and this caused inconsistency between zone PFNs and the
actual PFNs:
BUG: Bad page state in process swapper pfn:20165
page:41fe0ca0 refcount:0 mapcount:1 mapping:00000000 index:0x0 flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000
page dumped because: nonzero mapcount
CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc1-00001-g3a38f8a60c65-dirty #1
Stack from 404c9ebc:
404c9ebc 4029ab28 4029ab28 40088470 41fe0ca0 40299e21 40299df1 404ba2a4
00020165 00000000 41fd2c10 402c7ba0 41fd2c04 40088504 41fe0ca0 40299e21
00000000 40088a12 41fe0ca0 41fe0ca4 0000020a 00000000 00000001 402ca000
00000000 41fe0ca0 41fd2c10 41fd2c10 00000000 00000000 402b2388 00000001
400a0934 40091056 404c9f44 404c9f44 40088db4 402c7ba0 00000001 41fd2c04
41fe0ca0 41fd2000 41fe0ca0 40089e02 4026ecf4 40089e4e 41fe0ca0 ffffffff
Call Trace:
[<40088470>] 0x40088470
[<40088504>] 0x40088504
[<40088a12>] 0x40088a12
[<402ca000>] 0x402ca000
[<400a0934>] 0x400a0934
Adjust the memory registration with memblock to include the beginning of
the physical memory and make sure that the area occupied by the kernel is
marked as reserved.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ad816762f ]
Previously, kernel floating point code would run with the MXCSR control
register value last set by userland code by the thread that was active
on the CPU core just before kernel call. This could affect calculation
results if rounding mode was changed, or a crash if a FPU/SIMD exception
was unmasked.
Restore MXCSR to the kernel's default value.
[ bp: Carve out from a bigger patch by Petteri, add feature check, add
FNINIT call too (amluto). ]
Signed-off-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207979
Link: https://lkml.kernel.org/r/20200624114646.28953-2-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4f5a095da ]
in mic_pre_enable, pm_runtime_get_sync is called which
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9c633882d ]
Propagate the proper error codes from the called functions instead of
unconditionally returning 0.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Merge conflict so merged it manually.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e7ec6b529 ]
In the current implementation, mutex initialization
for encoder mutex locks are done during encoder
setup. This can lead to scenarios where the lock
is used before it is initialized. Move mutex_init
to dpu_encoder_init to avoid this.
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 177d381963 ]
In function msm_submitqueue_create, the queue is a local
variable, in return -EINVAL branch, queue didn`t add to ctx`s
list yet, and also didn`t kfree, this maybe bring in potential
memleak.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
[trivial commit msg fixup]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 97884ca8c2 upstream.
[this is a redesign rather than a backport]
We have a class of errata (grouped under the ARM64_WORKAROUND_1418040
banner) that force the trapping of counter access from 32bit EL0.
We would normally disable the whole vdso for such defect, except that
it would disable it for 64bit userspace as well, which is a shame.
Instead, add a new vdso_clock_mode, which signals that the vdso
isn't usable for compat tasks. This gets checked in the new
vdso_clocksource_ok() helper, now provided for the 32bit vdso.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200706163802.1836732-2-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0da7536fb4 ]
When no full socket is available, skbs are sent over a per-netns
control socket. Its sk_mark is temporarily adjusted to match that
of the real (request or timewait) socket or to reflect an incoming
skb, so that the outgoing skb inherits this in __ip_make_skb.
Introduction of the socket cookie mark field broke this. Now the
skb is set through the cookie and cork:
<caller> # init sockc.mark from sk_mark or cmsg
ip_append_data
ip_setup_cork # convert sockc.mark to cork mark
ip_push_pending_frames
ip_finish_skb
__ip_make_skb # set skb->mark to cork mark
But I missed these special control sockets. Update all callers of
__ip(6)_make_skb that were originally missed.
For IPv6, the same two icmp(v6) paths are affected. The third
case is not, as commit 92e55f412c ("tcp: don't annotate
mark on control socket from tcp_v6_send_response()") replaced
the ctl_sk->sk_mark with passing the mark field directly as a
function argument. That commit predates the commit that
introduced the bug.
Fixes: c6af0c227a ("ip: support SO_MARK cmsg")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reported-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 14b032b8f8 ]
In order for no_refcnt and is_data to be the lowest order two
bits in the 'val' we have to pad out the bitfield of the u8.
Fixes: ad0f75e5f5 ("cgroup: fix cgroup_sk_alloc() for sk_clone_lock()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ad0f75e5f5 ]
When we clone a socket in sk_clone_lock(), its sk_cgrp_data is
copied, so the cgroup refcnt must be taken too. And, unlike the
sk_alloc() path, sock_update_netprioidx() is not called here.
Therefore, it is safe and necessary to grab the cgroup refcnt
even when cgroup_sk_alloc is disabled.
sk_clone_lock() is in BH context anyway, the in_interrupt()
would terminate this function if called there. And for sk_alloc()
skcd->val is always zero. So it's safe to factor out the code
to make it more readable.
The global variable 'cgroup_sk_alloc_disabled' is used to determine
whether to take these reference counts. It is impossible to make
the reference counting correct unless we save this bit of information
in skcd->val. So, add a new bit there to record whether the socket
has already taken the reference counts. This obviously relies on
kmalloc() to align cgroup pointers to at least 4 bytes,
ARCH_KMALLOC_MINALIGN is certainly larger than that.
This bug seems to be introduced since the beginning, commit
d979a39d72 ("cgroup: duplicate cgroup reference when cloning sockets")
tried to fix it but not compeletely. It seems not easy to trigger until
the recent commit 090e28b229
("netprio_cgroup: Fix unlimited memory leak of v2 cgroups") was merged.
Fixes: bd1060a1d6 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Cameron Berkenpas <cam@neo-zeon.de>
Reported-by: Peter Geis <pgwipeout@gmail.com>
Reported-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reported-by: Daniël Sonck <dsonck92@gmail.com>
Reported-by: Zhang Qiang <qiang.zhang@windriver.com>
Tested-by: Cameron Berkenpas <cam@neo-zeon.de>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1ca0fafd73 ]
This essentially reverts commit 7212303268 ("tcp: md5: reject TCP_MD5SIG
or TCP_MD5SIG_EXT on established sockets")
Mathieu reported that many vendors BGP implementations can
actually switch TCP MD5 on established flows.
Quoting Mathieu :
Here is a list of a few network vendors along with their behavior
with respect to TCP MD5:
- Cisco: Allows for password to be changed, but within the hold-down
timer (~180 seconds).
- Juniper: When password is initially set on active connection it will
reset, but after that any subsequent password changes no network
resets.
- Nokia: No notes on if they flap the tcp connection or not.
- Ericsson/RedBack: Allows for 2 password (old/new) to co-exist until
both sides are ok with new passwords.
- Meta-Switch: Expects the password to be set before a connection is
attempted, but no further info on whether they reset the TCP
connection on a change.
- Avaya: Disable the neighbor, then set password, then re-enable.
- Zebos: Would normally allow the change when socket connected.
We can revert my prior change because commit 9424e2e7ad ("tcp: md5: fix potential
overestimation of TCP option space") removed the leak of 4 kernel bytes to
the wire that was the main reason for my patch.
While doing my investigations, I found a bug when a MD5 key is changed, leading
to these commits that stable teams want to consider before backporting this revert :
Commit 6a2febec33 ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()")
Commit e6ced831ef ("tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers")
Fixes: 7212303268 "tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets"
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e6ced831ef ]
My prior fix went a bit too far, according to Herbert and Mathieu.
Since we accept that concurrent TCP MD5 lookups might see inconsistent
keys, we can use READ_ONCE()/WRITE_ONCE() instead of smp_rmb()/smp_wmb()
Clearing all key->key[] is needed to avoid possible KMSAN reports,
if key->keylen is increased. Since tcp_md5_do_add() is not fast path,
using __GFP_ZERO to clear all struct tcp_md5sig_key is simpler.
data_race() was added in linux-5.8 and will prevent KCSAN reports,
this can safely be removed in stable backports, if data_race() is
not yet backported.
v2: use data_race() both in tcp_md5_hash_key() and tcp_md5_do_add()
Fixes: 6a2febec33 ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Marco Elver <elver@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 469aceddfa ]
Toshiaki pointed out that we now have two very similar functions to extract
the L3 protocol number in the presence of VLAN tags. And Daniel pointed out
that the unbounded parsing loop makes it possible for maliciously crafted
packets to loop through potentially hundreds of tags.
Fix both of these issues by consolidating the two parsing functions and
limiting the VLAN tag parsing to a max depth of 8 tags. As part of this,
switch over __vlan_get_protocol() to use skb_header_pointer() instead of
pskb_may_pull(), to avoid the possible side effects of the latter and keep
the skb pointer 'const' through all the parsing functions.
v2:
- Use limit of 8 tags instead of 32 (matching XMIT_RECURSION_LIMIT)
Reported-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: d7bf2ebebc ("sched: consistently handle layer3 header accesses in the presence of VLANs")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e114e1e8ac ]
Whenever cookie_init_timestamp() has been used to encode
ECN,SACK,WSCALE options, we can not remove the TS option in the SYNACK.
Otherwise, tcp_synack_options() will still advertize options like WSCALE
that we can not deduce later when receiving the packet from the client
to complete 3WHS.
Note that modern linux TCP stacks wont use MD5+TS+SACK in a SYN packet,
but we can not know for sure that all TCP stacks have the same logic.
Before the fix a tcpdump would exhibit this wrong exchange :
10:12:15.464591 IP C > S: Flags [S], seq 4202415601, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 456965269 ecr 0,nop,wscale 8], length 0
10:12:15.464602 IP S > C: Flags [S.], seq 253516766, ack 4202415602, win 65535, options [nop,nop,md5 valid,mss 1400,nop,nop,sackOK,nop,wscale 8], length 0
10:12:15.464611 IP C > S: Flags [.], ack 1, win 256, options [nop,nop,md5 valid], length 0
10:12:15.464678 IP C > S: Flags [P.], seq 1:13, ack 1, win 256, options [nop,nop,md5 valid], length 12
10:12:15.464685 IP S > C: Flags [.], ack 13, win 65535, options [nop,nop,md5 valid], length 0
After this patch the exchange looks saner :
11:59:59.882990 IP C > S: Flags [S], seq 517075944, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 1751508483 ecr 0,nop,wscale 8], length 0
11:59:59.883002 IP S > C: Flags [S.], seq 1902939253, ack 517075945, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 1751508479 ecr 1751508483,nop,wscale 8], length 0
11:59:59.883012 IP C > S: Flags [.], ack 1, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508479], length 0
11:59:59.883114 IP C > S: Flags [P.], seq 1:13, ack 1, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508479], length 12
11:59:59.883122 IP S > C: Flags [.], ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508483], length 0
11:59:59.883152 IP S > C: Flags [P.], seq 1:13, ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508484 ecr 1751508483], length 12
11:59:59.883170 IP C > S: Flags [.], ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508484 ecr 1751508484], length 0
Of course, no SACK block will ever be added later, but nothing should break.
Technically, we could remove the 4 nops included in MD5+TS options,
but again some stacks could break seeing not conventional alignment.
Fixes: 4957faade1 ("TCPCT part 1g: Responder Cookie => Initiator")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6a2febec33 ]
MD5 keys are read with RCU protection, and tcp_md5_do_add()
might update in-place a prior key.
Normally, typical RCU updates would allocate a new piece
of memory. In this case only key->key and key->keylen might
be updated, and we do not care if an incoming packet could
see the old key, the new one, or some intermediate value,
since changing the key on a live flow is known to be problematic
anyway.
We only want to make sure that in the case key->keylen
is changed, cpus in tcp_md5_hash_key() wont try to use
uninitialized data, or crash because key->keylen was
read twice to feed sg_init_one() and ahash_request_set_crypt()
Fixes: 9ea88a1530 ("tcp: md5: check md5 signature without socket lock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ba3bb0e76c ]
Whenever tcp_try_rmem_schedule() returns an error, we are under
trouble and should make sure to wakeup readers so that they
can drain socket queues and eventually make room.
Fixes: 03f45c883c ("tcp: avoid extra wakeups for SO_RCVLOWAT users")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7bf2ebebc ]
There are a couple of places in net/sched/ that check skb->protocol and act
on the value there. However, in the presence of VLAN tags, the value stored
in skb->protocol can be inconsistent based on whether VLAN acceleration is
enabled. The commit quoted in the Fixes tag below fixed the users of
skb->protocol to use a helper that will always see the VLAN ethertype.
However, most of the callers don't actually handle the VLAN ethertype, but
expect to find the IP header type in the protocol field. This means that
things like changing the ECN field, or parsing diffserv values, stops
working if there's a VLAN tag, or if there are multiple nested VLAN
tags (QinQ).
To fix this, change the helper to take an argument that indicates whether
the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we
make sure to skip all of them, so behaviour is consistent even in QinQ
mode.
To make the helper usable from the ECN code, move it to if_vlan.h instead
of pkt_sched.h.
v3:
- Remove empty lines
- Move vlan variable definitions inside loop in skb_protocol()
- Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and
bpf_skb_ecn_set_ce()
v2:
- Use eth_type_vlan() helper in skb_protocol()
- Also fix code that reads skb->protocol directly
- Change a couple of 'if/else if' statements to switch constructs to avoid
calling the helper twice
Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
Fixes: d8b9605d26 ("net: sched: fix skb->protocol use in case of accelerated vlan path")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit af199a1a9c ]
The number of ports is incorrectly set to the maximum available for a DSA
switch. Even if the extra ports are not used, this causes some functions
to be called later, like port_disable() and port_stp_state_set(). If the
driver doesn't check the port index, it will end up modifying unknown
registers.
Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 27d5332366 ]
In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set
skb's dst. However, it will eventually call inet6_csk_xmit() or
ip_queue_xmit() where skb's dst will be overwritten by:
skb_dst_set_noref(skb, dst);
without releasing the old dst in skb. Then it causes dst/dev refcnt leak:
unregister_netdevice: waiting for eth0 to become free. Usage count = 1
This can be reproduced by simply running:
# modprobe l2tp_eth && modprobe l2tp_ip
# sh ./tools/testing/selftests/net/l2tp.sh
So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst
should be dropped. This patch is to fix it by removing skb_dst_set()
from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core().
Fixes: 3557baabf2 ("[L2TP]: PPP over L2TP driver core")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: James Chapman <jchapman@katalix.com>
Tested-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aea23c323d ]
Thomas reported a regression with IPv6 and anycast using the following
reproducer:
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
ip -6 a add fc12::1/16 dev lo
sleep 2
echo "pinging lo"
ping6 -c 2 fc12::
The conversion of addrconf_f6i_alloc to use ip6_route_info_create missed
the use of fib6_is_reject which checks addresses added to the loopback
interface and sets the REJECT flag as needed. Update fib6_is_reject for
loopback checks to handle RTF_ANYCAST addresses.
Fixes: c7a1ce397a ("ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create")
Reported-by: thomas.gambier@nexedi.com
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 34fe5a1cf9 ]
Brian reported a crash in IPv6 code when using rpfilter with a setup
running FRR and external nexthop objects. The root cause of the crash
is fib6_select_path setting fib6_nh in the result to NULL because of
an improper check for nexthop objects.
More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif
set causing fib6_select_path to be called with have_oif_match set.
fib6_select_path has early check on have_oif_match and jumps to the
out label which presumes a builtin fib6_nh. This path is invalid for
nexthop objects; for external nexthops fib6_select_path needs to just
return if the fib6_nh has already been set in the result otherwise it
returns after the call to nexthop_path_fib6_result. Update the check
on have_oif_match to not bail on external nexthops.
Update selftests for this problem.
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Reported-by: Brian Rak <brak@choopa.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5eff069023 ]
IPv4 ping sockets don't set fl4.fl4_icmp_{type,code}, which leads to
incomplete IPsec ACQUIRE messages being sent to userspace. Currently,
both raw sockets and IPv6 ping sockets set those fields.
Expected output of "ip xfrm monitor":
acquire proto esp
sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 8 code 0 dev ens4
policy src 10.0.2.15/32 dst 8.8.8.8/32
<snip>
Currently with ping sockets:
acquire proto esp
sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 0 code 0 dev ens4
policy src 10.0.2.15/32 dst 8.8.8.8/32
<snip>
The Libreswan test suite found this problem after Fedora changed the
value for the sysctl net.ipv4.ping_group_range.
Fixes: c319b4d76b ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Paul Wouters <pwouters@redhat.com>
Tested-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e82a62fec ]
A potential deadlock can occur during registering or unregistering a
new generic netlink family between the main nl_table_lock and the
cb_lock where each thread wants the lock held by the other, as
demonstrated below.
1) Thread 1 is performing a netlink_bind() operation on a socket. As part
of this call, it will call netlink_lock_table(), incrementing the
nl_table_users count to 1.
2) Thread 2 is registering (or unregistering) a genl_family via the
genl_(un)register_family() API. The cb_lock semaphore will be taken for
writing.
3) Thread 1 will call genl_bind() as part of the bind operation to handle
subscribing to GENL multicast groups at the request of the user. It will
attempt to take the cb_lock semaphore for reading, but it will fail and
be scheduled away, waiting for Thread 2 to finish the write.
4) Thread 2 will call netlink_table_grab() during the (un)registration
call. However, as Thread 1 has incremented nl_table_users, it will not
be able to proceed, and both threads will be stuck waiting for the
other.
genl_bind() is a noop, unless a genl_family implements the mcast_bind()
function to handle setting up family-specific multicast operations. Since
no one in-tree uses this functionality as Cong pointed out, simply removing
the genl_bind() function will remove the possibility for deadlock, as there
is no attempt by Thread 1 above to take the cb_lock semaphore.
Fixes: c380d9a7af ("genetlink: pass multicast bind/unbind to families")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5fc6266af7 ]
Commit e57f61858b ("net: bridge: mcast: fix stale nsrcs pointer in
igmp3/mld2 report handling") introduced a bug in the IPv6 header payload
length check which would potentially lead to rejecting a valid MLD2 Report:
The check needs to take into account the 2 bytes for the "Number of
Sources" field in the "Multicast Address Record" before reading it.
And not the size of a pointer to this field.
Fixes: e57f61858b ("net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling")
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a42e6aee7f upstream.
This patch fixes ip dst and ipv6 address filters.
There were 2 mistakes in the code, which led to the issue:
* invalid register was used for ipv4 dst address;
* incorrect write order of dwords for ipv6 addresses.
Fixes: 23e7a718a4 ("net: aquantia: add rx-flow filter definitions")
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aee1f9f3c3 upstream.
If CRYPTO_DEV_ATMEL_AUTHENC is m, CRYPTO_DEV_ATMEL_SHA is m,
but CRYPTO_DEV_ATMEL_AES is y, building will fail:
drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_init_tfm':
atmel-aes.c:(.text+0x670): undefined reference to `atmel_sha_authenc_get_reqsize'
atmel-aes.c:(.text+0x67a): undefined reference to `atmel_sha_authenc_spawn'
drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_setkey':
atmel-aes.c:(.text+0x7e5): undefined reference to `atmel_sha_authenc_setkey'
Make CRYPTO_DEV_ATMEL_AUTHENC depend on CRYPTO_DEV_ATMEL_AES,
and select CRYPTO_DEV_ATMEL_SHA and CRYPTO_AUTHENC for it under there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes: 89a82ef87e ("crypto: atmel-authenc - add support to...")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d158367682 upstream.
The following error is raised when CONFIG_CRYPTO_DEV_ATMEL_AES=y and
CONFIG_CRYPTO_DEV_ATMEL_AUTHENC=m:
drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_setkey':
atmel-aes.c:(.text+0x9bc): undefined reference to `crypto_authenc_extractkeys'
Makefile:1094: recipe for target 'vmlinux' failed
Fix it by moving the selection of CRYPTO_AUTHENC under
config CRYPTO_DEV_ATMEL_AES.
Fixes: 89a82ef87e ("crypto: atmel-authenc - add support to...")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d6df52e999 ]
To be able to patch kernel code before paging is initialized do plain
memcpy if DAT is off. This is required to enable early jump label
initialization.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When commit 9017dc4fbd ("pwm: jz4740: Enhance precision in calculation
of duty cycle") from v5.8-rc1 was backported to v5.4.x its dependency on
commit ce1f9cece0 ("pwm: jz4740: Use clocks from TCU driver") was not
noticed which made the pwm-jz4740 driver fail to build.
As ce1f9cece0 depends on still more rework, just backport a small part
of this commit to make the driver build again. (There is no dependency
on the functionality introduced in ce1f9cece0, just the rate variable
is needed.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a3cf7c570 upstream.
Using Python version 3.8.2 and PySide2 version 5.14.0, ctrl-F ('Find')
would not expand the tree to the result. Fix by using setExpanded().
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Reports -> Context-Sensitive Call Graph or Reports -> Call Tree
Press: Ctrl-F
Enter: main
Press: Enter
Before: line showing 'main' does not display
After: tree is expanded to line showing 'main'
Fixes: ebd70c7dc2 ("perf scripts python: exported-sql-viewer.py: Add ability to find symbols in the call-graph")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200629091955.17090-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 031c8d5edb upstream.
Using ctrl-F ('Find') would not find 'unknown' because it matches id
zero. Fix by excluding id zero from selection.
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Reports -> Call Tree
Press: Ctrl-F
Enter: unknown
Press: Enter
Before: displays 'unknown' not found
After: tree is expanded to line showing 'unknown'
Fixes: ae8b887c00 ("perf scripts python: exported-sql-viewer.py: Add call tree")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200629091955.17090-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05a4fed69f upstream.
dm-multipath is the only user of blk_mq_queue_inflight(). When
dm-multipath calls blk_mq_queue_inflight() to check if it has
outstanding IO it can get a false negative. The reason for this is
blk_mq_rq_inflight() doesn't consider requests that are no longer
MQ_RQ_IN_FLIGHT but that are now MQ_RQ_COMPLETE (->complete isn't
called or finished yet) as "inflight".
This causes request-based dm-multipath's dm_wait_for_completion() to
return before all outstanding dm-multipath requests have actually
completed. This breaks DM multipath's suspend functionality because
blk-mq requests complete after DM's suspend has finished -- which
shouldn't happen.
Fix this by considering any request not in the MQ_RQ_IDLE state
(so either MQ_RQ_COMPLETE or MQ_RQ_IN_FLIGHT) as "inflight" in
blk_mq_rq_inflight().
Fixes: 3c94d83cb3 ("blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95e61b1b5d upstream.
Command line parameters might set static keys. This is true for s390 at
least since commit 6471384af2 ("mm: security: introduce init_on_alloc=1
and init_on_free=1 boot options"). To avoid the following WARN:
static_key_enable_cpuslocked(): static key 'init_on_alloc+0x0/0x40' used
before call to jump_label_init()
call jump_label_init() just before parse_early_param().
jump_label_init() is safe to call multiple times (x86 does that), doesn't
do any memory allocations and hence should be safe to call that early.
Fixes: 6471384af2 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Cc: <stable@vger.kernel.org> # 5.3: d6df52e999: s390/maccess: add no DAT mode to kernel_write
Cc: <stable@vger.kernel.org> # 5.3
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00fdec98d9 upstream.
Trap handler for syscall tracing reads EFA (Exception Fault Address),
in case strace wants PC of trap instruction (EFA is not part of pt_regs
as of current code).
However this EFA read is racy as it happens after dropping to pure
kernel mode (re-enabling interrupts). A taken interrupt could
context-switch, trigger a different task's trap, clobbering EFA for this
execution context.
Fix this by reading EFA early, before re-enabling interrupts. A slight
side benefit is de-duplication of FAKE_RET_FROM_EXCPN in trap handler.
The trap handler is common to both ARCompact and ARCv2 builds too.
This just came out of code rework/review and no real problem was reported
but is clearly a potential problem specially for strace.
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27a5e7d36d upstream.
The actual max_segs computation leads to failure while using the broadcom
sdio brcmfmac/bcmsdh driver, since the driver tries to make usage of
scatter gather.
But with the dram-access-quirk we use a 1,5K SRAM bounce buffer, and the
max_segs current value of 3 leads to max transfers to 4,5k, which doesn't
work.
This patch sets max_segs to 1 to better describe the hardware limitation,
and fix the SDIO functionality with the brcmfmac/bcmsdh driver on Amlogic
G12A/G12B SoCs on boards like SEI510 or Khadas VIM3.
Reported-by: Art Nikpal <art@khadas.com>
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Fixes: acdc8e71d9 ("mmc: meson-gx: add dram-access-quirk")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200608084458.32014-1-narmstrong@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41855a8986 upstream.
clang static analysis flags this error
drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc]
kfree(rdev->pm.dpm.ps[i].ps_priv);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc]
kfree(rdev->pm.dpm.ps);
^~~~~~~~~~~~~~~~~~~~~~
problem is reported in ci_dpm_fini, with these code blocks.
for (i = 0; i < rdev->pm.dpm.num_ps; i++) {
kfree(rdev->pm.dpm.ps[i].ps_priv);
}
kfree(rdev->pm.dpm.ps);
The first free happens in ci_parse_power_table where it cleans up locally
on a failure. ci_dpm_fini also does a cleanup.
ret = ci_parse_power_table(rdev);
if (ret) {
ci_dpm_fini(rdev);
return ret;
}
So remove the cleanup in ci_parse_power_table and
move the num_ps calculation to inside the loop so ci_dpm_fini
will know how many array elements to free.
Fixes: cc8dbbb4f6 ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 230ed39743 upstream.
While debugging a patch that I wrote I was hitting use-after-free panics
when accessing block groups on unmount. This turned out to be because
in the nocow case if we bail out of doing the nocow for whatever reason
we need to call btrfs_dec_nocow_writers() if we called the inc. This
puts our block group, but a few error cases does
if (nocow) {
btrfs_dec_nocow_writers();
goto error;
}
unfortunately, error is
error:
if (nocow)
btrfs_dec_nocow_writers();
so we get a double put on our block group. Fix this by dropping the
error cases calling of btrfs_dec_nocow_writers(), as it's handled at the
error label now.
Fixes: 762bf09893 ("btrfs: improve error handling in run_delalloc_nocow")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bf9cd2eed upstream.
Under somewhat convoluted conditions, it is possible to attempt to
release an extent_buffer that is under io, which triggers a BUG_ON in
btrfs_release_extent_buffer_pages.
This relies on a few different factors. First, extent_buffer reads done
as readahead for searching use WAIT_NONE, so they free the local extent
buffer reference while the io is outstanding. However, they should still
be protected by TREE_REF. However, if the system is doing signficant
reclaim, and simultaneously heavily accessing the extent_buffers, it is
possible for releasepage to race with two concurrent readahead attempts
in a way that leaves TREE_REF unset when the readahead extent buffer is
released.
Essentially, if two tasks race to allocate a new extent_buffer, but the
winner who attempts the first io is rebuffed by a page being locked
(likely by the reclaim itself) then the loser will still go ahead with
issuing the readahead. The loser's call to find_extent_buffer must also
race with the reclaim task reading the extent_buffer's refcount as 1 in
a way that allows the reclaim to re-clear the TREE_REF checked by
find_extent_buffer.
The following represents an example execution demonstrating the race:
CPU0 CPU1 CPU2
reada_for_search reada_for_search
readahead_tree_block readahead_tree_block
find_create_tree_block find_create_tree_block
alloc_extent_buffer alloc_extent_buffer
find_extent_buffer // not found
allocates eb
lock pages
associate pages to eb
insert eb into radix tree
set TREE_REF, refs == 2
unlock pages
read_extent_buffer_pages // WAIT_NONE
not uptodate (brand new eb)
lock_page
if !trylock_page
goto unlock_exit // not an error
free_extent_buffer
release_extent_buffer
atomic_dec_and_test refs to 1
find_extent_buffer // found
try_release_extent_buffer
take refs_lock
reads refs == 1; no io
atomic_inc_not_zero refs to 2
mark_buffer_accessed
check_buffer_tree_ref
// not STALE, won't take refs_lock
refs == 2; TREE_REF set // no action
read_extent_buffer_pages // WAIT_NONE
clear TREE_REF
release_extent_buffer
atomic_dec_and_test refs to 1
unlock_page
still not uptodate (CPU1 read failed on trylock_page)
locks pages
set io_pages > 0
submit io
return
free_extent_buffer
release_extent_buffer
dec refs to 0
delete from radix tree
btrfs_release_extent_buffer_pages
BUG_ON(io_pages > 0)!!!
We observe this at a very low rate in production and were also able to
reproduce it in a test environment by introducing some spurious delays
and by introducing probabilistic trylock_page failures.
To fix it, we apply check_tree_ref at a point where it could not
possibly be unset by a competing task: after io_pages has been
incremented. All the codepaths that clear TREE_REF check for io, so they
would not be able to clear it after this point until the io is done.
Stack trace, for reference:
[1417839.424739] ------------[ cut here ]------------
[1417839.435328] kernel BUG at fs/btrfs/extent_io.c:4841!
[1417839.447024] invalid opcode: 0000 [#1] SMP
[1417839.502972] RIP: 0010:btrfs_release_extent_buffer_pages+0x20/0x1f0
[1417839.517008] Code: ed e9 ...
[1417839.558895] RSP: 0018:ffffc90020bcf798 EFLAGS: 00010202
[1417839.570816] RAX: 0000000000000002 RBX: ffff888102d6def0 RCX: 0000000000000028
[1417839.586962] RDX: 0000000000000002 RSI: ffff8887f0296482 RDI: ffff888102d6def0
[1417839.603108] RBP: ffff88885664a000 R08: 0000000000000046 R09: 0000000000000238
[1417839.619255] R10: 0000000000000028 R11: ffff88885664af68 R12: 0000000000000000
[1417839.635402] R13: 0000000000000000 R14: ffff88875f573ad0 R15: ffff888797aafd90
[1417839.651549] FS: 00007f5a844fa700(0000) GS:ffff88885f680000(0000) knlGS:0000000000000000
[1417839.669810] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1417839.682887] CR2: 00007f7884541fe0 CR3: 000000049f609002 CR4: 00000000003606e0
[1417839.699037] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[1417839.715187] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[1417839.731320] Call Trace:
[1417839.737103] release_extent_buffer+0x39/0x90
[1417839.746913] read_block_for_search.isra.38+0x2a3/0x370
[1417839.758645] btrfs_search_slot+0x260/0x9b0
[1417839.768054] btrfs_lookup_file_extent+0x4a/0x70
[1417839.778427] btrfs_get_extent+0x15f/0x830
[1417839.787665] ? submit_extent_page+0xc4/0x1c0
[1417839.797474] ? __do_readpage+0x299/0x7a0
[1417839.806515] __do_readpage+0x33b/0x7a0
[1417839.815171] ? btrfs_releasepage+0x70/0x70
[1417839.824597] extent_readpages+0x28f/0x400
[1417839.833836] read_pages+0x6a/0x1c0
[1417839.841729] ? startup_64+0x2/0x30
[1417839.849624] __do_page_cache_readahead+0x13c/0x1a0
[1417839.860590] filemap_fault+0x6c7/0x990
[1417839.869252] ? xas_load+0x8/0x80
[1417839.876756] ? xas_find+0x150/0x190
[1417839.884839] ? filemap_map_pages+0x295/0x3b0
[1417839.894652] __do_fault+0x32/0x110
[1417839.902540] __handle_mm_fault+0xacd/0x1000
[1417839.912156] handle_mm_fault+0xaa/0x1c0
[1417839.921004] __do_page_fault+0x242/0x4b0
[1417839.930044] ? page_fault+0x8/0x30
[1417839.937933] page_fault+0x1e/0x30
[1417839.945631] RIP: 0033:0x33c4bae
[1417839.952927] Code: Bad RIP value.
[1417839.960411] RSP: 002b:00007f5a844f7350 EFLAGS: 00010206
[1417839.972331] RAX: 000000000000006e RBX: 1614b3ff6a50398a RCX: 0000000000000000
[1417839.988477] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002
[1417840.004626] RBP: 00007f5a844f7420 R08: 000000000000006e R09: 00007f5a94aeccb8
[1417840.020784] R10: 00007f5a844f7350 R11: 0000000000000000 R12: 00007f5a94aecc79
[1417840.036932] R13: 00007f5a94aecc78 R14: 00007f5a94aecc90 R15: 00007f5a94aecc40
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6396026045 upstream.
When evaluating access control over kallsyms visibility, credentials at
open() time need to be used, not the "current" creds (though in BPF's
case, this has likely always been the same). Plumb access to associated
file->f_cred down through bpf_dump_raw_ok() and its callers now that
kallsysm_show_value() has been refactored to take struct cred.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 7105e828c0 ("bpf: allow for correlation of maps and helpers in dump")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60f7bb66b8 upstream.
The kprobe show() functions were using "current"'s creds instead
of the file opener's creds for kallsyms visibility. Fix to use
seq_file->file->f_cred.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 81365a947d ("kprobes: Show address of kprobes if kallsyms does")
Fixes: ffb9bd68eb ("kprobes: Show blacklist addresses as same as kallsyms does")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed66f991bb upstream.
In order to gain access to the open file's f_cred for kallsym visibility
permission checks, refactor the module section attributes to use the
bin_attribute instead of attribute interface. Additionally removes the
redundant "name" struct member.
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 160251842c upstream.
In order to perform future tests against the cred saved during open(),
switch kallsyms_show_value() to operate on a cred, and have all current
callers pass current_cred(). This makes it very obvious where callers
are checking the wrong credential in their "read" contexts. These will
be fixed in the coming patches.
Additionally switch return value to bool, since it is always used as a
direct permission check, not a 0-on-success, negative-on-error style
function return.
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If SVE is enabled then 'ret' can be assigned the return value of
kvm_vcpu_enable_sve() which may be 0 causing future "goto out" sites to
erroneously return 0 on failure rather than -EINVAL as expected.
Remove the initialisation of 'ret' and make setting the return value
explicit to avoid this situation in the future.
Fixes: 9a3cdf26e3 ("KVM: arm64/sve: Allow userspace to enable SVE for vcpus")
Cc: stable@vger.kernel.org
Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200617105456.28245-1-steven.price@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7c83d096ae upstream.
Mark CR4.TSD as being possibly owned by the guest as that is indeed the
case on VMX. Without TSD being tagged as possibly owned by the guest, a
targeted read of CR4 to get TSD could observe a stale value. This bug
is benign in the current code base as the sole consumer of TSD is the
emulator (for RDTSC) and the emulator always "reads" the entirety of CR4
when grabbing bits.
Add a build-time assertion in to ensure VMX doesn't hand over more CR4
bits without also updating x86.
Fixes: 52ce3c21ae ("x86,kvm,vmx: Don't trap writes to CR4.TSD")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703040422.31536-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d74fcfc1f0 upstream.
Inject a #GP on MOV CR4 if CR4.LA57 is toggled in 64-bit mode, which is
illegal per Intel's SDM:
CR4.LA57
57-bit linear addresses (bit 12 of CR4) ... blah blah blah ...
This bit cannot be modified in IA-32e mode.
Note, the pseudocode for MOV CR doesn't call out the fault condition,
which is likely why the check was missed during initial development.
This is arguably an SDM bug and will hopefully be fixed in future
release of the SDM.
Fixes: fd8cb43373 ("KVM: MMU: Expose the LA57 feature to VM.")
Cc: stable@vger.kernel.org
Reported-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200703021714.5549-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ecad245de upstream.
Bit 8 would be the "global" bit, which does not quite make sense for non-leaf
page table entries. Intel ignores it; AMD ignores it in PDEs and PDPEs, but
reserves it in PML4Es.
Probably, earlier versions of the AMD manual documented it as reserved in PDPEs
as well, and that behavior made it into KVM as well as kvm-unit-tests; fix it.
Cc: stable@vger.kernel.org
Reported-by: Nadav Amit <namit@vmware.com>
Fixes: a0c0feb579 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD", 2014-09-03)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7733306bd5 upstream.
The "inline" keyword is a hint for the compiler to inline a function. The
functions system_uses_irq_prio_masking() and gic_write_pmr() are used by
the code running at EL2 on a non-VHE system, so mark them as
__always_inline to make sure they'll always be part of the .hyp.text
section.
This fixes the following splat when trying to run a VM:
[ 47.625273] Kernel panic - not syncing: HYP panic:
[ 47.625273] PS:a00003c9 PC:0000ca0b42049fc4 ESR:86000006
[ 47.625273] FAR:0000ca0b42049fc4 HPFAR:0000000010001000 PAR:0000000000000000
[ 47.625273] VCPU:0000000000000000
[ 47.647261] CPU: 1 PID: 217 Comm: kvm-vcpu-0 Not tainted 5.8.0-rc1-ARCH+ #61
[ 47.654508] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
[ 47.661139] Call trace:
[ 47.663659] dump_backtrace+0x0/0x1cc
[ 47.667413] show_stack+0x18/0x24
[ 47.670822] dump_stack+0xb8/0x108
[ 47.674312] panic+0x124/0x2f4
[ 47.677446] panic+0x0/0x2f4
[ 47.680407] SMP: stopping secondary CPUs
[ 47.684439] Kernel Offset: disabled
[ 47.688018] CPU features: 0x240402,20002008
[ 47.692318] Memory Limit: none
[ 47.695465] ---[ end Kernel panic - not syncing: HYP panic:
[ 47.695465] PS:a00003c9 PC:0000ca0b42049fc4 ESR:86000006
[ 47.695465] FAR:0000ca0b42049fc4 HPFAR:0000000010001000 PAR:0000000000000000
[ 47.695465] VCPU:0000000000000000 ]---
The instruction abort was caused by the code running at EL2 trying to fetch
an instruction which wasn't mapped in the EL2 translation tables. Using
objdump showed the two functions as separate symbols in the .text section.
Fixes: 85738e05dc ("arm64: kvm: Unmask PMR before entering guest")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200618171254.1596055-1-alexandru.elisei@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a6ca7881b upstream.
We have a Dell AIO, there is neither internal speaker nor internal
mic, only a multi-function audio jack on it.
Users reported that after freshly installing the OS and plug
a headset to the audio jack, the headset can't output sound. I
reproduced this bug, at that moment, the Input Source is as below:
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Headphone Mic' 'Headset Mic'
Item0: 'Headphone Mic'
That is because the patch_realtek will set this audio jack as mic_in
mode if Input Source's value is hp_mic.
If it is not fresh installing, this issue will not happen since the
systemd will run alsactl restore -f /var/lib/alsa/asound.state, this
will set the 'Input Source' according to history value.
If there is internal speaker or internal mic, this issue will not
happen since there is valid sink/source in the pulseaudio, the PA will
set the 'Input Source' according to active_port.
To fix this issue, change the parser function to let the hs_mic be
stored ahead of hp_mic.
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200625083833.11264-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c4317b1167 ]
In case devlink reload failed, it is possible to trigger a
use-after-free when querying the kernel for device info via 'devlink dev
info' [1].
This happens because as part of the reload error path the PCI command
interface is de-initialized and its mailboxes are freed. When the
devlink '->info_get()' callback is invoked the device is queried via the
command interface and the freed mailboxes are accessed.
Fix this by initializing the command interface once during probe and not
during every reload.
This is consistent with the other bus used by mlxsw (i.e., 'mlxsw_i2c')
and also allows user space to query the running firmware version (for
example) from the device after a failed reload.
[1]
BUG: KASAN: use-after-free in memcpy include/linux/string.h:406 [inline]
BUG: KASAN: use-after-free in mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675
Write of size 4096 at addr ffff88810ae32000 by task syz-executor.1/2355
CPU: 1 PID: 2355 Comm: syz-executor.1 Not tainted 5.8.0-rc2+ #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xf6/0x16e lib/dump_stack.c:118
print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
check_memory_region_inline mm/kasan/generic.c:186 [inline]
check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192
memcpy+0x39/0x60 mm/kasan/common.c:106
memcpy include/linux/string.h:406 [inline]
mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675
mlxsw_cmd_exec+0x249/0x550 drivers/net/ethernet/mellanox/mlxsw/core.c:2335
mlxsw_cmd_access_reg drivers/net/ethernet/mellanox/mlxsw/cmd.h:859 [inline]
mlxsw_core_reg_access_cmd drivers/net/ethernet/mellanox/mlxsw/core.c:1938 [inline]
mlxsw_core_reg_access+0x2f6/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1985
mlxsw_reg_query drivers/net/ethernet/mellanox/mlxsw/core.c:2000 [inline]
mlxsw_devlink_info_get+0x17f/0x6e0 drivers/net/ethernet/mellanox/mlxsw/core.c:1090
devlink_nl_info_fill.constprop.0+0x13c/0x2d0 net/core/devlink.c:4588
devlink_nl_cmd_info_get_dumpit+0x246/0x460 net/core/devlink.c:4648
genl_lock_dumpit+0x85/0xc0 net/netlink/genetlink.c:575
netlink_dump+0x515/0xe50 net/netlink/af_netlink.c:2245
__netlink_dump_start+0x53d/0x830 net/netlink/af_netlink.c:2353
genl_family_rcv_msg_dumpit.isra.0+0x296/0x300 net/netlink/genetlink.c:638
genl_family_rcv_msg net/netlink/genetlink.c:733 [inline]
genl_rcv_msg+0x78d/0x9d0 net/netlink/genetlink.c:753
netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:764
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0x150/0x190 net/socket.c:672
____sys_sendmsg+0x6d8/0x840 net/socket.c:2363
___sys_sendmsg+0xff/0x170 net/socket.c:2417
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2450
do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: a9c8336f65 ("mlxsw: core: Add support for devlink info command")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9d5420273 ]
We should not trigger a warning when a memory allocation fails. Remove
the WARN_ON().
The warning is constantly triggered by syzkaller when it is injecting
faults:
[ 2230.758664] FAULT_INJECTION: forcing a failure.
[ 2230.758664] name failslab, interval 1, probability 0, space 0, times 0
[ 2230.762329] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28
...
[ 2230.898175] WARNING: CPU: 3 PID: 1407 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:6265 mlxsw_sp_router_fib_event+0xfad/0x13e0
[ 2230.898179] Kernel panic - not syncing: panic_on_warn set ...
[ 2230.898183] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28
[ 2230.898190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Fixes: 3057224e01 ("mlxsw: spectrum_router: Implement FIB offload in deferred work")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ced4799d06 ]
Change the way the "magic-packet" DT property is handled in the
macb_probe() function, matching DT binding documentation.
Now we mark the device as "wakeup capable" instead of calling the
device_init_wakeup() function that would enable the wakeup source.
For Ethernet WoL, enabling the wakeup_source is done by
using ethtool and associated macb_set_wol() function that
already calls device_set_wakeup_enable() for this purpose.
That would reduce power consumption by cutting more clocks if
"magic-packet" property is set but WoL is not configured by ethtool.
Fixes: 3e2a5e1539 ("net: macb: add wake-on-lan support via magic packet")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 515a10a701 ]
Use the proper struct device pointer to check if the wakeup flag
and wakeup source are positioned.
Use the one passed by function call which is equivalent to
&bp->dev->dev.parent.
It's preventing the trigger of a spurious interrupt in case the
Wake-on-Lan feature is used.
Fixes: d54f89af6c ("net: macb: Add pm runtime support")
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a1cf4e443 ]
Some released FW versions mistakenly don't set the capability that 50G
per lane link-modes are supported for VFs (ptys_extended_ethernet
capability bit). When the capability is unset, read
PTYS.ext_eth_proto_capability (always reliable).
If PTYS.ext_eth_proto_capability is valid (has a non-zero value)
conclude that the HCA supports 50G per lane. Otherwise, conclude that
the HCA doesn't support 50G per lane.
Fixes: a08b4ed137 ("net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47afbdd2fa ]
Fix eeprom SFP query support by setting i2c_addr, offset and page number
correctly. Unlike QSFP modules, SFP eeprom params are as follow:
- i2c_addr is 0x50 for offset 0 - 255 and 0x51 for offset 256 - 511.
- Page number is always zero.
- Page offset is always relative to zero.
As part of eeprom query, query the module ID (SFP / QSFP*) via helper
function to set the params accordingly.
In addition, change mlx5_qsfp_eeprom_page() input type to be u16 to avoid
unnecessary casting.
Fixes: a708fb7b1f ("net/mlx5e: ethtool, Add support for EEPROM high pages query")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13cf8aab74 ]
NVM config file address will be modified when the MBI image is upgraded.
Driver would return stale config values if user reads the nvm-config
(via ethtool -d) in this state. The fix is to re-populate nvm attribute
info while reading the nvm config values/partition.
Changes from previous version:
-------------------------------
v3: Corrected the formatting in 'Fixes' tag.
v2: Added 'Fixes' tag.
Fixes: 1ac4329a1c ("qed: Add configuration information to register dump and debug data")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 530c8632b5 ]
Some released FW versions mistakenly don't set the capability that 50G per
lane link-modes are supported for VFs (ptys_extended_ethernet capability
bit).
Use PTYS.ext_eth_proto_capability instead, as this indication is always
accurate. If PTYS.ext_eth_proto_capability is valid
(has a non-zero value) conclude that the HCA supports 50G per lane.
Otherwise, conclude that the HCA doesn't support 50G per lane.
Fixes: 08e8676f16 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Link: https://lore.kernel.org/r/20200707110612.882962-3-leon@kernel.org
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76c4d85c92 ]
Convert all-mask IP address to Big Endian, instead, for comparison.
Fixes: f286dd8eaa ("cxgb4: use correct type for all-mask IP address comparison")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 579dd91ab3 ]
When adding first socket to nbd, if nsock's allocation failed, the data
structure member "config->socks" was reallocated, but the data structure
member "config->num_connections" was not updated. A memory leak will occur
then because the function "nbd_config_put" will free "config->socks" only
when "config->num_connections" is not zero.
Fixes: 03bf73c315 ("nbd: prevent memory leak")
Reported-by: syzbot+934037347002901b8d2a@syzkaller.appspotmail.com
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8523c00626 ]
After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will
delay installing breakpoints, do single-step first), it won't work
correctly, and it will enter kdb due to oops.
It's because the reason gotten in kdb_stub() is not as expected, and it
seems that the ex_vector for single-step should be 0, like what arch
powerpc/sh/parisc has implemented.
Before the patch:
Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry
[0]kdb> bp printk
Instruction(i) BP #0 at 0xffff8000101486cc (printk)
is enabled addr at ffff8000101486cc, hardtype=0 installed=0
[0]kdb> g
/ # echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc
[3]kdb> ss
Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null)
due to oops @ 0xffff800010082ab8
CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6
Hardware name: linux,dummy-virt (DT)
pstate: 00000085 (nzcv daIf -PAN -UAO)
pc : el1_irq+0x78/0x180
lr : __handle_sysrq+0x80/0x190
sp : ffff800015003bf0
x29: ffff800015003d20 x28: ffff0000fa878040
x27: 0000000000000000 x26: ffff80001126b1f0
x25: ffff800011b6a0d8 x24: 0000000000000000
x23: 0000000080200005 x22: ffff8000101486cc
x21: ffff800015003d30 x20: 0000ffffffffffff
x19: ffff8000119f2000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000
x9 : 0000000000000000 x8 : ffff800015003e50
x7 : 0000000000000002 x6 : 00000000380b9990
x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0
x3 : 0000ffffffffffff x2 : ffff800011b6a0d8
x1 : ffff800011b6a000 x0 : ffff80001130c9d8
Call trace:
el1_irq+0x78/0x180
printk+0x0/0x84
write_sysrq_trigger+0xb0/0x118
proc_reg_write+0xb4/0xe0
__vfs_write+0x18/0x40
vfs_write+0xb0/0x1b8
ksys_write+0x64/0xf0
__arm64_sys_write+0x14/0x20
el0_svc_common.constprop.2+0xb0/0x168
do_el0_svc+0x20/0x98
el0_sync_handler+0xec/0x1a8
el0_sync+0x140/0x180
[3]kdb>
After the patch:
Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry
[0]kdb> bp printk
Instruction(i) BP #0 at 0xffff8000101486cc (printk)
is enabled addr at ffff8000101486cc, hardtype=0 installed=0
[0]kdb> g
/ # echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc
[0]kdb> g
Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc
[0]kdb> ss
Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8
[0]kdb>
Fixes: 44679a4f14 ("arm64: KGDB: Add step debugging support")
Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200509214159.19680-2-liwei391@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a066562113 ]
Enable promisc mode of PF, set VF link state to enable, and
run iperf of the VF, then do self test of the PF. The self test
will fail with a low frequency, and may cause a use-after-free
problem.
[ 87.142126] selftest:000004a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 87.159722] ==================================================================
[ 87.174187] BUG: KASAN: use-after-free in hex_dump_to_buffer+0x140/0x608
[ 87.187600] Read of size 1 at addr ffff003b22828000 by task ethtool/1186
[ 87.201012]
[ 87.203978] CPU: 7 PID: 1186 Comm: ethtool Not tainted 5.5.0-rc4-gfd51c473-dirty #4
[ 87.219306] Hardware name: Huawei TaiShan 2280 V2/BC82AMDA, BIOS TA BIOS 2280-A CS V2.B160.01 01/15/2020
[ 87.238292] Call trace:
[ 87.243173] dump_backtrace+0x0/0x280
[ 87.250491] show_stack+0x24/0x30
[ 87.257114] dump_stack+0xe8/0x140
[ 87.263911] print_address_description.isra.8+0x70/0x380
[ 87.274538] __kasan_report+0x12c/0x230
[ 87.282203] kasan_report+0xc/0x18
[ 87.288999] __asan_load1+0x60/0x68
[ 87.295969] hex_dump_to_buffer+0x140/0x608
[ 87.304332] print_hex_dump+0x140/0x1e0
[ 87.312000] hns3_lb_check_skb_data+0x168/0x170
[ 87.321060] hns3_clean_rx_ring+0xa94/0xfe0
[ 87.329422] hns3_self_test+0x708/0x8c0
The length of packet sent by the selftest process is only
128 + 14 bytes, and the min buffer size of a BD is 256 bytes,
and the receive process will make sure the packet sent by
the selftest process is in the linear part, so only check
the linear part in hns3_lb_check_skb_data().
So fix this use-after-free by using skb_headlen() to dump
skb->data instead of skb->len.
Fixes: c39c4d98dc ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e22b5e728b ]
When unloading driver, if flag HNS3_NIC_STATE_INITED has been
already cleared, the debugfs will not be uninitialized, so fix it.
Fixes: b2292360bb ("net: hns3: Add debugfs framework registration")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ed58f96a7 ]
In a case where the ID_REV register read is failed, the memory for a
private data structure has to be freed before returning error from the
function smsc95xx_bind.
Fixes: bbd9f9ee69 ("smsc95xx: add wol support for more frame types")
Signed-off-by: Andre Edich <andre.edich@microchip.com>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c8b1e855f ]
The return value of the function smsc95xx_reset() must be checked
to avoid returning false success from the function smsc95xx_bind().
Fixes: 2f7ca802bd ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Andre Edich <andre.edich@microchip.com>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75bcb8776d ]
When recording PEBS-via-PT, the kernel will not accept the intel_pt
event with register sampling e.g.
# perf record --kcore -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
Error:
intel_pt/branch=0/: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
Fix by suppressing register sampling on the intel_pt evsel.
Committer notes:
Adrian informed that this is only available from Tremont onwards, so on
older processors the error continues the same as before.
Fixes: 9e64cefe43 ("perf intel-pt: Process options for PEBS event synthesis")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luwei Kang <luwei.kang@intel.com>
Link: http://lore.kernel.org/lkml/20200630133935.11150-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af199a1a9c ]
The number of ports is incorrectly set to the maximum available for a DSA
switch. Even if the extra ports are not used, this causes some functions
to be called later, like port_disable() and port_stp_state_set(). If the
driver doesn't check the port index, it will end up modifying unknown
registers.
Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f427f4d621 ]
There is a race condition where ib_nl_make_request() inserts the request
data into the linked list but the timer in ib_nl_request_timeout() can see
it and destroy it before ib_nl_send_msg() is done touching it. This could
happen, for instance, if there is a long delay allocating memory during
nlmsg_new()
This causes a use-after-free in the send_mad() thread:
[<ffffffffa02f43cb>] ? ib_pack+0x17b/0x240 [ib_core]
[ <ffffffffa032aef1>] ib_sa_path_rec_get+0x181/0x200 [ib_sa]
[<ffffffffa0379db0>] rdma_resolve_route+0x3c0/0x8d0 [rdma_cm]
[<ffffffffa0374450>] ? cma_bind_port+0xa0/0xa0 [rdma_cm]
[<ffffffffa040f850>] ? rds_rdma_cm_event_handler_cmn+0x850/0x850 [rds_rdma]
[<ffffffffa040f22c>] rds_rdma_cm_event_handler_cmn+0x22c/0x850 [rds_rdma]
[<ffffffffa040f860>] rds_rdma_cm_event_handler+0x10/0x20 [rds_rdma]
[<ffffffffa037778e>] addr_handler+0x9e/0x140 [rdma_cm]
[<ffffffffa026cdb4>] process_req+0x134/0x190 [ib_addr]
[<ffffffff810a02f9>] process_one_work+0x169/0x4a0
[<ffffffff810a0b2b>] worker_thread+0x5b/0x560
[<ffffffff810a0ad0>] ? flush_delayed_work+0x50/0x50
[<ffffffff810a68fb>] kthread+0xcb/0xf0
[<ffffffff816ec49a>] ? __schedule+0x24a/0x810
[<ffffffff816ec49a>] ? __schedule+0x24a/0x810
[<ffffffff810a6830>] ? kthread_create_on_node+0x180/0x180
[<ffffffff816f25a7>] ret_from_fork+0x47/0x90
[<ffffffff810a6830>] ? kthread_create_on_node+0x180/0x180
The ownership rule is once the request is on the list, ownership transfers
to the list and the local thread can't touch it any more, just like for
the normal MAD case in send_mad().
Thus, instead of adding before send and then trying to delete after on
errors, move the entire thing under the spinlock so that the send and
update of the lists are atomic to the conurrent threads. Lightly reoganize
things so spinlock safe memory allocations are done in the final NL send
path and the rest of the setup work is done before and outside the lock.
Fixes: 3ebd2fd0d0 ("IB/sa: Put netlink request into the request list before sending")
Link: https://lore.kernel.org/r/1592964789-14533-1-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a259e6b73 ]
t4_prep_fw goto bye tag with positive return value when something
bad happened and which can not free resource in adap_init0.
so fix it to return negative value.
Fixes: 16e47624e7 ("cxgb4: Add new scheme to update T4/T5 firmware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2ca673d2c ]
When support for short preambles was added, it incorrectly keyed its
decision off state->speed instead of state->interface. state->speed
is not guaranteed to be correct for in-band modes, which can lead to
short preambles being unexpectedly disabled.
Fix this by keying off the interface mode, which is the only way that
mvneta can operate at 2.5Gbps.
Fixes: da58a931f2 ("net: mvneta: Add support for 2500Mbps SGMII")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8025751d4d ]
If an ingress verdict program specifies message sizes greater than
skb->len and there is an ENOMEM error due to memory pressure we
may call the rcv_msg handler outside the strp_data_ready() caller
context. This is because on an ENOMEM error the strparser will
retry from a workqueue. The caller currently protects the use of
psock by calling the strp_data_ready() inside a rcu_read_lock/unlock
block.
But, in above workqueue error case the psock is accessed outside
the read_lock/unlock block of the caller. So instead of using
psock directly we must do a look up against the sk again to
ensure the psock is available.
There is an an ugly piece here where we must handle
the case where we paused the strp and removed the psock. On
psock removal we first pause the strparser and then remove
the psock. If the strparser is paused while an skb is
scheduled on the workqueue the skb will be dropped on the
flow and kfree_skb() is called. If the workqueue manages
to get called before we pause the strparser but runs the rcvmsg
callback after the psock is removed we will hit the unlikely
case where we run the sockmap rcvmsg handler but do not have
a psock. For now we will follow strparser logic and drop the
skb on the floor with skb_kfree(). This is ugly because the
data is dropped. To date this has not caused problems in practice
because either the application controlling the sockmap is
coordinating with the datapath so that skbs are "flushed"
before removal or we simply wait for the sock to be closed before
removing it.
This patch fixes the describe RCU bug and dropping the skb doesn't
make things worse. Future patches will improve this by allowing
the normal case where skbs are not merged to skip the strparser
altogether. In practice many (most?) use cases have no need to
merge skbs so its both a code complexity hit as seen above and
a performance issue. For example, in the Cilium case we always
set the strparser up to return sbks 1:1 without any merging and
have avoided above issues.
Fixes: e91de6afa8 ("bpf: Fix running sk_skb program types with ktls")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159312679888.18340.15248924071966273998.stgit@john-XPS-13-9370
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93dd5f1859 ]
There are two paths to generate the below RCU splat the first and
most obvious is the result of the BPF verdict program issuing a
redirect on a TLS socket (This is the splat shown below). Unlike
the non-TLS case the caller of the *strp_read() hooks does not
wrap the call in a rcu_read_lock/unlock. Then if the BPF program
issues a redirect action we hit the RCU splat.
However, in the non-TLS socket case the splat appears to be
relatively rare, because the skmsg caller into the strp_data_ready()
is wrapped in a rcu_read_lock/unlock. Shown here,
static void sk_psock_strp_data_ready(struct sock *sk)
{
struct sk_psock *psock;
rcu_read_lock();
psock = sk_psock(sk);
if (likely(psock)) {
if (tls_sw_has_ctx_rx(sk)) {
psock->parser.saved_data_ready(sk);
} else {
write_lock_bh(&sk->sk_callback_lock);
strp_data_ready(&psock->parser.strp);
write_unlock_bh(&sk->sk_callback_lock);
}
}
rcu_read_unlock();
}
If the above was the only way to run the verdict program we
would be safe. But, there is a case where the strparser may throw an
ENOMEM error while parsing the skb. This is a result of a failed
skb_clone, or alloc_skb_for_msg while building a new merged skb when
the msg length needed spans multiple skbs. This will in turn put the
skb on the strp_wrk workqueue in the strparser code. The skb will
later be dequeued and verdict programs run, but now from a
different context without the rcu_read_lock()/unlock() critical
section in sk_psock_strp_data_ready() shown above. In practice
I have not seen this yet, because as far as I know most users of the
verdict programs are also only working on single skbs. In this case no
merge happens which could trigger the above ENOMEM errors. In addition
the system would need to be under memory pressure. For example, we
can't hit the above case in selftests because we missed having tests
to merge skbs. (Added in later patch)
To fix the below splat extend the rcu_read_lock/unnlock block to
include the call to sk_psock_tls_verdict_apply(). This will fix both
TLS redirect case and non-TLS redirect+error case. Also remove
psock from the sk_psock_tls_verdict_apply() function signature its
not used there.
[ 1095.937597] WARNING: suspicious RCU usage
[ 1095.940964] 5.7.0-rc7-02911-g463bac5f1ca79 #1 Tainted: G W
[ 1095.944363] -----------------------------
[ 1095.947384] include/linux/skmsg.h:284 suspicious rcu_dereference_check() usage!
[ 1095.950866]
[ 1095.950866] other info that might help us debug this:
[ 1095.950866]
[ 1095.957146]
[ 1095.957146] rcu_scheduler_active = 2, debug_locks = 1
[ 1095.961482] 1 lock held by test_sockmap/15970:
[ 1095.964501] #0: ffff9ea6b25de660 (sk_lock-AF_INET){+.+.}-{0:0}, at: tls_sw_recvmsg+0x13a/0x840 [tls]
[ 1095.968568]
[ 1095.968568] stack backtrace:
[ 1095.975001] CPU: 1 PID: 15970 Comm: test_sockmap Tainted: G W 5.7.0-rc7-02911-g463bac5f1ca79 #1
[ 1095.977883] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[ 1095.980519] Call Trace:
[ 1095.982191] dump_stack+0x8f/0xd0
[ 1095.984040] sk_psock_skb_redirect+0xa6/0xf0
[ 1095.986073] sk_psock_tls_strp_read+0x1d8/0x250
[ 1095.988095] tls_sw_recvmsg+0x714/0x840 [tls]
v2: Improve commit message to identify non-TLS redirect plus error case
condition as well as more common TLS case. In the process I decided
doing the rcu_read_unlock followed by the lock/unlock inside branches
was unnecessarily complex. We can just extend the current rcu block
and get the same effeective without the shuffling and branching.
Thanks Martin!
Fixes: e91de6afa8 ("bpf: Fix running sk_skb program types with ktls")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/159312677907.18340.11064813152758406626.stgit@john-XPS-13-9370
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0b8892e24 ]
Disable the plane if it's not visible. Otherwise mtk_ovl_layer_config()
would proceed with invalid plane and we may see vblank timeout.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d8913504c ]
When adding a quirk for IRQ on Intel Galileo Gen 2 the commit ba8c90c618
("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
missed GPIO resource release. We can safely do this in the same quirk, since
IRQ will be locked by GPIO framework when requested and unlocked on freeing.
Fixes: ba8c90c618 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba8c90c618 ]
ACPI table on Intel Galileo Gen 2 has wrong pin number for IRQ resource
of one of the I²C GPIO expanders. Since we know what that number is and
luckily have GPIO bases fixed for SoC's controllers, we may use a simple
DMI quirk to match the platform and retrieve GpioInt() pin on it for
the expander in question.
Mika suggested the way to avoid a quirk in the GPIO ACPI library and
here is the second, almost rewritten version of it.
Fixes: f32517bf1a ("gpio: pca953x: support ACPI devices found on Galileo Gen2")
Depends-on: 25e3ef894e ("gpio: acpi: Split out acpi_gpio_get_irq_resource() helper")
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd844ba9ae ]
This function is concerned with the long-term CPU mask, not the
transitory mask the task might have while migrate disabled. Before
this patch, if a task was migrate-disabled at the time
__set_cpus_allowed_ptr() was called, and the new mask happened to be
equal to the CPU that the task was running on, then the mask update
would be lost.
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200617121742.cpxppyi7twxmpin7@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 032a9966a2 ]
The completion vector index that is given during CQ creation can't
exceed the number of support vectors by the underlying RDMA device. This
violation currently can accure, for example, in case one will try to
connect with N regular read/write queues and M poll queues and the sum
of N + M > num_supported_vectors. This will lead to failure in establish
a connection to remote target. Instead, in that case, share a completion
vector between queues.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2655971ad4 ]
dwc3_pci_resume_work() calls pm_runtime_get_sync() that increments
the reference counter. In case of failure, decrement the reference
before returning.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afe89f115e ]
The sense data buffer in sense_buf_pool is allocated with size of
MPT_SENSE_BUFFER_ALLOC(64) (multiplied by req_depth) while SNS_LEN(sc)(96)
is used when reading the data. That may lead to a read from unallocated
area, sometimes from another (unallocated) page. To fix this, limit the
read size to MPT_SENSE_BUFFER_ALLOC.
Link: https://lore.kernel.org/r/20200616150446.4840-1-thenzl@redhat.com
Co-developed-by: Stanislav Saner <ssaner@redhat.com>
Signed-off-by: Stanislav Saner <ssaner@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4845446036 ]
if of_find_device_by_node() succeed, imx6q_suspend_init() doesn't have a
corresponding put_device(). Thus add a jump target to fix the exception
handling for this function implementation.
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5618303d85 ]
As the man description of the truncate, if the size changed,
then the st_ctime and st_mtime fields should be updated. But
in cifs, we doesn't do it.
It lead the xfstests generic/313 failed.
So, add the ATTR_MTIME|ATTR_CTIME flags on attrs when change
the file size
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 998f5bbe3d ]
Currently if early_pgm_check_handler is called it ends up in pgm check
loop. The problem is that early_pgm_check_handler is instrumented by
KASAN but executed without DAT flag enabled which leads to addressing
exception when KASAN checks try to access shadow memory.
Fix that by executing early handlers with DAT flag on under KASAN as
expected.
Reported-and-tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1ed1754f2 ]
With CONFIG_DEBUG_VIRTUAL=y, __pa() checks for addr value and if it's
less than PAGE_OFFSET it leads to a BUG().
#define __pa(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET);
(unsigned long)(x) & 0x0fffffffffffffffUL;
})
kernel BUG at arch/powerpc/kvm/book3s_64_mmu_radix.c:43!
cpu 0x70: Vector: 700 (Program Check) at [c0000018a2187360]
pc: c000000000161b30: __kvmhv_copy_tofrom_guest_radix+0x130/0x1f0
lr: c000000000161d5c: kvmhv_copy_from_guest_radix+0x3c/0x80
...
kvmhv_copy_from_guest_radix+0x3c/0x80
kvmhv_load_from_eaddr+0x48/0xc0
kvmppc_ld+0x98/0x1e0
kvmppc_load_last_inst+0x50/0x90
kvmppc_hv_emulate_mmio+0x288/0x2b0
kvmppc_book3s_radix_page_fault+0xd8/0x2b0
kvmppc_book3s_hv_page_fault+0x37c/0x1050
kvmppc_vcpu_run_hv+0xbb8/0x1080
kvmppc_vcpu_run+0x34/0x50
kvm_arch_vcpu_ioctl_run+0x2fc/0x410
kvm_vcpu_ioctl+0x2b4/0x8f0
ksys_ioctl+0xf4/0x150
sys_ioctl+0x28/0x80
system_call_exception+0x104/0x1d0
system_call_common+0xe8/0x214
kvmhv_copy_tofrom_guest_radix() uses a NULL value for to/from to
indicate direction of copy.
Avoid calling __pa() if the value is NULL to avoid the BUG().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Massage change log a bit to mention CONFIG_DEBUG_VIRTUAL]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611120159.680284-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b40eb7350 ]
Continue the reset path when partner adapter is not ready or H_CLOSED is
returned from reset crq. This patch allows the CRQ init to proceed to
establish a valid CRQ for traffic to flow after reset.
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d59e267912 ]
READ_ONCE should be used when reading rings prior to accessing the
statistics pointer. Introduce this as well as the corresponding WRITE_ONCE
usage when allocating and freeing the rings, to ensure protected access.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f140ad9fe2 ]
READ_ONCE should be used when reading rings prior to accessing the
statistics pointer. Introduce this as well as the corresponding WRITE_ONCE
usage when allocating and freeing the rings, to ensure protected access.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a642ca7f3 ]
The older SoCs like Armada XP support a 2500BaseX mode in the datasheets
referred to as DR-SGMII (Double rated SGMII) or HS-SGMII (High Speed
SGMII). This is an upclocked 1000BaseX mode, thus
PHY_INTERFACE_MODE_2500BASEX is the appropriate mode define for it.
adding support for it merely means writing the correct magic value into
the MVNETA_SERDES_CFG register.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4748553f5 ]
The MVNETA_SERDES_CFG register is only available on older SoCs like the
Armada XP. On newer SoCs like the Armada 38x the fields are moved to
comphy. This patch moves the writes to this register next to the comphy
initialization, so that depending on the SoC either comphy or
MVNETA_SERDES_CFG is configured.
With this we no longer write to the MVNETA_SERDES_CFG on SoCs where it
doesn't exist.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b984b6d8b5 ]
The following bug appeared in the MCDE driver/display
initialization during the recent merge window.
First the place we call drm_fbdev_generic_setup() in the
wrong place: this needs to be called AFTER calling
drm_dev_register() else we get this splat:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/drm_fb_helper.c:2198 drm_fbdev_generic_setup+0x164/0x1a8
mcde a0350000.mcde: Device has not been registered.
Modules linked in:
Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
[<c010e704>] (unwind_backtrace) from [<c010a86c>] (show_stack+0x10/0x14)
[<c010a86c>] (show_stack) from [<c0414f38>] (dump_stack+0x9c/0xb0)
[<c0414f38>] (dump_stack) from [<c0121c8c>] (__warn+0xb8/0xd0)
[<c0121c8c>] (__warn) from [<c0121d18>] (warn_slowpath_fmt+0x74/0xb8)
[<c0121d18>] (warn_slowpath_fmt) from [<c04b154c>] (drm_fbdev_generic_setup+0x164/0x1a8)
[<c04b154c>] (drm_fbdev_generic_setup) from [<c04ed278>] (mcde_drm_bind+0xc4/0x160)
[<c04ed278>] (mcde_drm_bind) from [<c04f06b8>] (try_to_bring_up_master+0x15c/0x1a4)
(...)
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200613223027.4189309-1-linus.walleij@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9a0a05bf8 ]
Currently when a host1x device driver is unregistered, it is not
detached from the host1x controller, which means that the device
will stay around and when the driver is registered again, it may
bind to the old, stale device rather than the new one that was
created from scratch upon driver registration. This in turn can
cause various weird crashes within the driver core because it is
confronted with a device that was already deleted.
Fix this by detaching the driver from the host1x controller when
it is unregistered. This ensures that the deleted device also is
no longer present in the device list that drivers will bind to.
Reported-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef4e417eb3 ]
Though the unconditional enable/disable code is not a final solution,
we don't want to run into a NULL pointer situation when window group
doesn't link to its DC parent if the DC is disabled in Device Tree.
So this patch simply adds a check to make sure that window group has
a valid parent before running into tegra_windowgroup_enable/disable.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11425c4519 ]
ttm_bo_add_move_fence() invokes dma_fence_get(), which returns a
reference of the specified dma_fence object to "fence" with increased
refcnt.
When ttm_bo_add_move_fence() returns, local variable "fence" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ttm_bo_add_move_fence(). When no_wait_gpu flag is equals to true, the
function forgets to decrease the refcnt increased by dma_fence_get(),
causing a refcnt leak.
Fix this issue by calling dma_fence_put() when no_wait_gpu flag is
equals to true.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/370221/
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0df12a01f4 ]
We can currently sometimes get "RXS timed out" errors and "EOT timed out"
errors with spi transfers.
These errors can be made easy to reproduce by reading the cpcap iio
values in a loop while keeping the CPUs busy by also reading /dev/urandom.
The "RXS timed out" errors we can fix by adding spi-cpol and spi-cpha
in addition to the spi-cs-high property we already have.
The "EOT timed out" errors we can fix by increasing the spi clock rate
to 9.6 MHz. Looks similar MC13783 PMIC says it works at spi clock rates
up to 20 MHz, so let's assume we can pick any rate up to 20 MHz also
for cpcap.
Cc: maemo-leste@lists.dyne.org
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53d860952c ]
The assembly and disassembly of data to be sent to or received from
a device invoke functions regmap_format_XX() and regmap_parse_XX()
that extract or insert data items from or into a buffer, using
assignments. In some cases the functions are called with a buffer
pointer with an odd address. On architectures with strict alignment
requirements this can result in a kernel crash. The assignments
have been replaced by functions that take alignment into account.
Signed-off-by: Jens Thoms Toerring <jt@toerring.de>
Link: https://lore.kernel.org/r/20200531095300.GA27570@toerring.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7684580d45 ]
During device removal, the driver should unregister the SPI controller
and stop the hardware. Otherwise the dspi_transfer_one_message() could
wait on completion infinitely.
Additionally, calling spi_unregister_controller() first in device
removal reverse-matches the probe function, where SPI controller is
registered at the end.
Fixes: 05209f4570 ("spi: fsl-dspi: add missing clk_disable_unprepare() in dspi_remove()")
Reported-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200622110543.5035-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 774911290c ]
The current number of KVM_IRQCHIP_NUM_PINS results in an order 3
allocation (32kb) for each guest start/restart. This can result in OOM
killer activity even with free swap when the memory is fragmented
enough:
kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0
kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu
kernel: Hardware name: IBM 8562 T02 Z06 (LPAR)
kernel: Call Trace:
kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0)
kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0
kernel: [<00000001f8687032>] dump_header+0x62/0x258
kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180
kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580
kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90
kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320
kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0
kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0
kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0
kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0
kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760
kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690
kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0
kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40
kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8
As far as I can tell s390x does not use the iopins as we bail our for
anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is
only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to
reduce the memory footprint.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16 08:16:32 +02:00
2228 changed files with 25031 additions and 11513 deletions
boolvdso_direct;/* Usable for direct VDSO access? */
/* Usable for direct VDSO access? */
enumvdso_arch_clockmodeclock_mode;
};
#endif
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
