mirror of
https://github.com/raspberrypi/linux.git
synced 2025-12-06 01:49:46 +00:00
0a4636e214
This is a squash of all firmware-kms related patches from previous branches, up to and including "drm/vc4: Set the possible crtcs mask correctly for planes with FKMS" plus a couple of minor fixups for the 5.9 branch. Please refer to earlier branches for full history. This patch includes work by Eric Anholt, James Hughes, Phil Elwell, Dave Stevenson, Dom Cobley, and Jonathon Bell. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> drm/vc4: Fixup firmware-kms after "drm/atomic: Pass the full state to CRTC atomic enable/disable" Prototype for those calls changed, so amend fkms (which isn't upstream) to match. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> drm/vc4: Fixup fkms for API change Atomic flush and check changed API, so fix up the downstream-only FKMS driver. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> drm/vc4: Make normalize_zpos conditional on using fkms Eric's view was that there was no point in having zpos support on vc4 as all the planes had the same functionality. Can be later squashed into (and fixes): drm/vc4: Add firmware-kms mode Signed-off-by: Dom Cobley <popcornmix@gmail.com> drm/vc4: FKMS: Change of Broadcast RGB mode needs a mode change The Broadcast RGB (aka HDMI limited/full range) property is only notified to the firmware on mode change, so this needs to be signalled when set. https://github.com/raspberrypi/firmware/issues/1580 Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> vc4/drv: Only notify firmware of display done with kms fkms driver still wants firmware display to be active Signed-off-by: Dom Cobley <popcornmix@gmail.com> ydrm/vc4: fkms: Fix margin calculations for the right/bottom edges The calculations clipped the right/bottom edge of the clipped range based on the left/top margins. https://github.com/raspberrypi/linux/issues/4447 Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> drm/vc4: fkms: Use new devm_rpi_firmware_get api drm/kms: Add allow_fb_modifiers Signed-off-by: Dom Cobley <popcornmix@gmail.com> drm/vc4: Add async update support for cursor planes Now that cursors are implemented as regular planes, all cursor movements result in atomic updates. As the firmware-kms driver doesn't support asynchronous updates, these are synchronous, which limits the update rate to the screen refresh rate. Xorg seems unaware of this (or at least of the effect of this), because if the mouse is configured with a higher update rate than the screen then continuous mouse movement results in an increasing backlog of mouse events - cue extreme lag. Add minimal support for asynchronous updates - limited to cursor planes - to eliminate the lag. See: https://github.com/raspberrypi/linux/pull/4971 https://github.com/raspberrypi/linux/issues/4988 Signed-off-by: Phil Elwell <phil@raspberrypi.com> drivers/gpu/drm/vc4: Add missing 32-bit RGB formats The missing 32-bit per pixel ABGR and various "RGB with an X value" formats are added. Change sent by Dave Stevenson. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> drm: vc4: Fixup duplicated macro definition in vc4_firmware_kms Both vc4_drv.h and vc4_firmware_kms.c had definitions for to_vc4_crtc. Rename the fkms one to make it unique, and drop the magic define vc4_crtc vc4_kms_crtc define to_vc4_crtc to_vc4_kms_crtc that renamed half the variable and function names in a slightly unexpected way. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> drm/vc4: Fix FKMS for when the YUV chroma planes are different buffers The code was assuming that it was a single buffer with offsets, when kmstest uses separate buffers and 0 offsets for each plane. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> drm/vc4: fkms: Rename plane related functions The name collide with the Full KMS functions that are going to be made public. Signed-off-by: Maxime Ripard <maxime@cerno.tech> drm/vc4_fkms: Fix up interrupt handler for both 2835/2711 and 2712 2712 has switched from using the SMI peripheral to another interrupt source for the vsync interrupt, so handle both sources cleanly. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> drm/vc4: fkms: No SMI abuse needed on BCM2712 Since we don't use the (absent) SMI block to create interrupts on BCM2712, there's no need to map any registers. Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Linux kernel
There are several guides for kernel developers and users. These guides can be rendered in a number of formats, like HTML and PDF. Please read Documentation/admin-guide/README.rst first.
In order to build the documentation, use make htmldocs or
make pdfdocs. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory, several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the requirements for building and running the kernel, and information about the problems which may result by upgrading your kernel.
Build status for rpi-6.1.y:
Build status for rpi-6.6.y:
Build status for rpi-6.12.y:
