Go to file
Mark Zhang 8edab8a72d RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert
The obj_event may be loaded immediately after inserted, then if the
list_head is not initialized then we may get a poisonous pointer.  This
fixes the crash below:

 mlx5_core 0000:03:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced)
 mlx5_core.sf mlx5_core.sf.4: firmware version: 32.38.3056
 mlx5_core 0000:03:00.0 en3f0pf0sf2002: renamed from eth0
 mlx5_core.sf mlx5_core.sf.4: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps
 IPv6: ADDRCONF(NETDEV_CHANGE): en3f0pf0sf2002: link becomes ready
 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
 Mem abort info:
   ESR = 0x96000006
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000006
   CM = 0, WnR = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=00000007760fb000
 [0000000000000060] pgd=000000076f6d7003, p4d=000000076f6d7003, pud=0000000777841003, pmd=0000000000000000
 Internal error: Oops: 96000006 [#1] SMP
 Modules linked in: ipmb_host(OE) act_mirred(E) cls_flower(E) sch_ingress(E) mptcp_diag(E) udp_diag(E) raw_diag(E) unix_diag(E) tcp_diag(E) inet_diag(E) binfmt_misc(E) bonding(OE) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) isofs(E) cdrom(E) mst_pciconf(OE) ib_umad(OE) mlx5_ib(OE) ipmb_dev_int(OE) mlx5_core(OE) kpatch_15237886(OEK) mlxdevm(OE) auxiliary(OE) ib_uverbs(OE) ib_core(OE) psample(E) mlxfw(OE) tls(E) sunrpc(E) vfat(E) fat(E) crct10dif_ce(E) ghash_ce(E) sha1_ce(E) sbsa_gwdt(E) virtio_console(E) ext4(E) mbcache(E) jbd2(E) xfs(E) libcrc32c(E) mmc_block(E) virtio_net(E) net_failover(E) failover(E) sha2_ce(E) sha256_arm64(E) nvme(OE) nvme_core(OE) gpio_mlxbf3(OE) mlx_compat(OE) mlxbf_pmc(OE) i2c_mlxbf(OE) sdhci_of_dwcmshc(OE) pinctrl_mlxbf3(OE) mlxbf_pka(OE) gpio_generic(E) i2c_core(E) mmc_core(E) mlxbf_gige(OE) vitesse(E) pwr_mlxbf(OE) mlxbf_tmfifo(OE) micrel(E) mlxbf_bootctl(OE) virtio_ring(E) virtio(E) ipmi_devintf(E) ipmi_msghandler(E)
  [last unloaded: mst_pci]
 CPU: 11 PID: 20913 Comm: rte-worker-11 Kdump: loaded Tainted: G           OE K   5.10.134-13.1.an8.aarch64 #1
 Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.2.2.12968 Oct 26 2023
 pstate: a0400089 (NzCv daIf +PAN -UAO -TCO BTYPE=--)
 pc : dispatch_event_fd+0x68/0x300 [mlx5_ib]
 lr : devx_event_notifier+0xcc/0x228 [mlx5_ib]
 sp : ffff80001005bcf0
 x29: ffff80001005bcf0 x28: 0000000000000001
 x27: ffff244e0740a1d8 x26: ffff244e0740a1d0
 x25: ffffda56beff5ae0 x24: ffffda56bf911618
 x23: ffff244e0596a480 x22: ffff244e0596a480
 x21: ffff244d8312ad90 x20: ffff244e0596a480
 x19: fffffffffffffff0 x18: 0000000000000000
 x17: 0000000000000000 x16: ffffda56be66d620
 x15: 0000000000000000 x14: 0000000000000000
 x13: 0000000000000000 x12: 0000000000000000
 x11: 0000000000000040 x10: ffffda56bfcafb50
 x9 : ffffda5655c25f2c x8 : 0000000000000010
 x7 : 0000000000000000 x6 : ffff24545a2e24b8
 x5 : 0000000000000003 x4 : ffff80001005bd28
 x3 : 0000000000000000 x2 : 0000000000000000
 x1 : ffff244e0596a480 x0 : ffff244d8312ad90
 Call trace:
  dispatch_event_fd+0x68/0x300 [mlx5_ib]
  devx_event_notifier+0xcc/0x228 [mlx5_ib]
  atomic_notifier_call_chain+0x58/0x80
  mlx5_eq_async_int+0x148/0x2b0 [mlx5_core]
  atomic_notifier_call_chain+0x58/0x80
  irq_int_handler+0x20/0x30 [mlx5_core]
  __handle_irq_event_percpu+0x60/0x220
  handle_irq_event_percpu+0x3c/0x90
  handle_irq_event+0x58/0x158
  handle_fasteoi_irq+0xfc/0x188
  generic_handle_irq+0x34/0x48
  ...

Fixes: 7597385371 ("IB/mlx5: Enable subscription for device events over DEVX")
Link: https://patch.msgid.link/r/3ce7f20e0d1a03dc7de6e57494ec4b8eaf1f05c2.1750147949.git.leon@kernel.org
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-17 14:23:53 -03:00
2022-09-28 09:02:20 +02:00
2025-02-19 14:53:27 -07:00
2025-06-08 13:44:43 -07:00
2024-03-18 03:36:32 -06:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
Description
No description provided
Readme 4.8 GiB
Languages
C 97.7%
Assembly 1.3%
Shell 0.3%
Makefile 0.3%
Python 0.2%
Other 0.1%