Sai Kumar Cholleti 72cef64180 gpio: exar: set value when external pull-up or pull-down is present ...

Setting GPIO direction = high, sometimes results in GPIO value = 0.

If a GPIO is pulled high, the following construction results in the
value being 0 when the desired value is 1:

$ echo "high" > /sys/class/gpio/gpio336/direction
$ cat /sys/class/gpio/gpio336/value
0

Before the GPIO direction is changed from an input to an output,
exar_set_value() is called with value = 1, but since the GPIO is an
input when exar_set_value() is called, _regmap_update_bits() reads a 1
due to an external pull-up.  regmap_set_bits() sets force_write =
false, so the value (1) is not written.  When the direction is then
changed, the GPIO becomes an output with the value of 0 (the hardware
default).

regmap_write_bits() sets force_write = true, so the value is always
written by exar_set_value() and an external pull-up doesn't affect the
outcome of setting direction = high.

The same can happen when a GPIO is pulled low, but the scenario is a
little more complicated.

$ echo high > /sys/class/gpio/gpio351/direction
$ cat /sys/class/gpio/gpio351/value
1

$ echo in > /sys/class/gpio/gpio351/direction
$ cat /sys/class/gpio/gpio351/value
0

$ echo low > /sys/class/gpio/gpio351/direction
$ cat /sys/class/gpio/gpio351/value
1

Fixes: 36fb7218e8 ("gpio: exar: switch to using regmap")
Co-developed-by: Matthew McClain <mmcclain@noprivs.com>
Signed-off-by: Matthew McClain <mmcclain@noprivs.com>
Signed-off-by: Sai Kumar Cholleti <skmr537@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241105071523.2372032-1-skmr537@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

2024-11-21 09:08:47 +01:00

6.5 KiB

Raw Blame History

View Raw