The raspberry pi kernel has changed the plane IDs in their drm
driver[1], which causes weston to crash upon mouse movement.
This patch adapts the relevant variable sizes from 32-bit to
64-bit.
Since the kernel modification hasn't been upstreamed by rpi, this patch
is deemed to be inappropriate for upstreaming to weston.
Also, clean up this bbappend: the main recipe has switched to meson
long time ago, the autotools config options are obsolete, so remove them.
Beside that the "fbdev" PACKAGECONFIG doesn't exist anymore, so drop it
from the removal list.
[1]: 8181e682d6
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Add vc4-kms-dsi-ili9881-5inch.dtbo to RPI_KERNEL_DEVICETREE_OVERLAYS
for the 5" version of Raspberry Pi Touch Display 2.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Following the recent major breaking change with the introduction of
bitbake-setup because of which the Poky repository master branch is
no longer being updated, the Poky git repository has to be replaced
by bitbake and openembedded-core. This fixes the GitHub workflow
with branch master of meta-raspberrypi for yocto-check-layer test.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Following the recent major breaking change with the introduction of
bitbake-setup because of which the Poky repository master branch is
no longer being updated, the Poky git repository has to be replaced
by bitbake, openembedded-core and meta-yocto which provides layers
meta-poky and meta-yocto-bsp. This fixes the GitHub workflows with
branch master of meta-raspberrypi and allows running auto checks.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add rpi-backlight.dtbo to RPI_KERNEL_DEVICETREE_OVERLAYS. This is
a devicetree overlay for mailbox-driven Raspberry Pi DSI Display
backlight controller.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Move the raspberrypi PACKAGECONFIG to meta-oe (at least partially),
as the libcamera recipe needs to know when is it built for an rpi due
to a new build dependency. Also, make the PACKAGECONFIG append device
specific. Otherwise the behavior of the bbappend should not change
by this patch.
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Quite a few things have changed lately, eaiser to browse the release
page: https://github.com/raspberrypi/rpicam-apps/releases
The main reason for the update it improved build-compatibiltiy with
tensorflow-lite: it doesn't need cmake/pkg-config file anymore to
find the library, so it should be easier to integrate it with
meta-tensorflow.
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Add w1-gpio-pi5.dtbo to RPI_KERNEL_DEVICETREE_OVERLAYS to resolve
the following issue noticed in vclog --msg on Raspberry Pi 5 when
ENABLE_W1 is set to 1:
dtdebug: mapped overlay 'w1-gpio' to 'w1-gpio-pi5'
dtdebug: Failed to open overlay file 'overlays/w1-gpio-pi5.dtbo'
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
This machine configuration is for the Raspberry Pi 2B V1.2 (64-bit).
Note: Raspberry Pi 2 Model B V1.2[1] switched from BCM2836[2] (V1.0,
V1.1) to BCM2837[3] that is 64-bit CPU used in Raspberry Pi 3 Model B.
BCM2836[2]
The Broadcom chip used in the Raspberry Pi 2 Model B. The
underlying architecture in BCM2836 is identical to BCM2835. The
only significant difference is the removal of the ARM1176JZF-S
processor and replacement with a quad-core Cortex-A7 cluster.
BCM2837[3]
This is the Broadcom chip used in the Raspberry Pi 3 Model B,
later models of the Raspberry Pi 2 Model B, and the Raspberry Pi
Compute Module 3. The underlying architecture of the BCM2837 is
identical to the BCM2836. The only significant difference is the
replacement of the ARMv7 quad core cluster with a quad-core ARM
Cortex A53 (ARMv8) cluster.
The ARM cores run at 1.2GHz, making the device about 50% faster
than the Raspberry Pi 2. The VideoCore IV runs at 400MHz.
See:
Poky (Yocto Project Reference Distro) 5.2.99+snapshot-cfbb00657ab961a3c3a8e6619fc08a2a3f4255c7 raspberrypi2-64 ttyAMA0
raspberrypi2-64 login: root
WARNING: Poky is a reference Yocto Project distribution that should be used for testing and development purposes only. It is recommended that you create your own distribution for production use.
root@raspberrypi2-64:~# uname -a
Linux raspberrypi2-64 6.12.41-v8 #1 SMP PREEMPT Thu Aug 7 16:48:46 UTC 2025 aarch64 GNU/Linux
root@raspberrypi2-64:~# cat /proc/device-tree/compatible
raspberrypi,2-model-b-rev2brcm,bcm2837
root@raspberrypi2-64:~# tty
/dev/ttyAMA0
root@raspberrypi2-64:~# dmesg | head
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.12.41-v8 (oe-user@oe-host) (aarch64-poky-linux-gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.45.0.20250908) #1 SMP PREEMPT Thu Aug 7 16:48:46 UTC 2025
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.2
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000001ec00000..0x000000002ebfffff (262144 KiB) map reusable linux,cma
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003b3fffff]
[1]: https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#flagship-series
[2]: https://www.raspberrypi.com/documentation/computers/processors.html#bcm2836
[3]: https://www.raspberrypi.com/documentation/computers/processors.html#bcm2837
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Package rpicam_app.so.1.4.2 library for the default package to fix the
following error.
ERROR: libcamera-apps-1.4.2+git-r0 do_package: QA Issue: libcamera-apps: Files/directories were installed but not shipped in any package:
/usr/lib/rpicam_app.so.1.4.2
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
libcamera-apps: 1 installed and not shipped files. [installed-vs-shipped]
ERROR: libcamera-apps-1.4.2+git-r0 do_package: Fatal QA errors were found, failing task.
ERROR: Logfile of failure stored in: /home/build-2/tmp/work/cortexa53-poky-linux/libcamera-apps/1.4.2+git/temp/log.do_package.1110484
ERROR: Task (/home/meta-raspberrypi/dynamic-layers/multimedia-layer/recipes-multimedia/libcamera-apps/libcamera-apps_git.bb:do_package) failed with exit code '1'
The following version expansion is used to make it compatible with future
package version changes.
${@d.getVar("PV", False).__str__().split('+')[0]}"
Fixes: https://github.com/agherzan/meta-raspberrypi/issues/1440
Signed-off-by: Bhargav Das <bhargavdas100@gmail.com>
SOCs used in rpi3 and rpi4 do not have AES crypto HW engine
denote it by using more appropriate default tune, this ensures
that it enforces +nocrypto into -mtune regardless of gcc or clang
compiler.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
It is already applied on upstream, see u-boot rev,
564d99d0723e338792df6897dc7407df2cf6196d
Fixes:
ERROR: u-boot-1_2025.07-r0 do_patch: Applying patch '0001-rpi-always-set-fdt_addr-with-firmware-provided-FDT-address.patch' on target directory '/workspaces/ls/linux-distro/build-ls-rpi4/tmp/work/ls_rpi4-limonsoftware-linux/u-boot/2025.07/sources/u-boot-2025.07'
CmdError('quilt --quiltrc /workspaces/ls/linux-distro/build-ls-rpi4/tmp/work/ls_rpi4-limonsoftware-linux/u-boot/2025.07/recipe-sysroot-native/etc/quiltrc push', 0, 'stdout: Applying patch 0001-rpi-always-set-fdt_addr-with-firmware-provided-FDT-address.patch
patching file board/raspberrypi/rpi/rpi.c
Hunk #1 FAILED at 318.
1 out of 1 hunk FAILED -- rejects in file board/raspberrypi/rpi/rpi.c
patch unexpectedly ends in middle of line
Patch 0001-rpi-always-set-fdt_addr-with-firmware-provided-FDT-address.patch can be reverse-applied
Signed-off-by: Anibal Limon <anibal@limonsoftware.com>
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
I needed support of the seeed-can-fd-hat-v2 Can Shield
Added the seeed-can-fd-hat-v2.dtbo device tree overlay to the rpi-base.inc and added the parameter for the CAN shield under the rpi-config so it can be easily enabled as a parameter from e.g. the local.conf and is added to the /boot/config.txt of the Pi. I also added the changes to the documentation.
Signed-off-by: Moritz Boesenberg <moritz@techmountain.dev>
Similarly to https://github.com/agherzan/meta-raspberrypi/pull/1481 this file also
needs an update.
picamera-libs-20230509~buster-r0 do_populate_lic fails:
ERROR: QA Issue: lib32-picamera-libs: LIC_FILES_CHKSUM points to an invalid file: lib32-picamera-libs/20230509~buster/raspberrypi-firmware-1.20230509~buster/opt/vc/LICENCE [license-checksum]
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
To solve the AQ Issue it could not find the license file:
ERROR: rpi-bootfiles-20250430-r3 do_populate_lic: QA Issue: rpi-bootfiles: LIC_FILES_CHKSUM points to an invalid file: .../build/tmp/work/raspberrypi5-oe-linux/rpi-bootfiles/20250430/raspberrypi-firmware-bc7f439/boot/LICENCE.broadcom [license-checksum]
Signed-off-by: Jan Vermaete <jan.vermaete@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Some of them were introduced by mass-removal of S = WORKDIR/git assignments;
rather than try to fix up (or redo) just these, I've run this sed command over
the whole tree:
sed -i -z -E 's/([ \t\f\v\r]*\n){3,}/\n\n/g' `find . -name *.bb -o -name *.inc`
The rationale is that more than one empty line is wasting vertical screen space, and
does nothing for readability.
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Since there are currently multiple breaking changes, update to a new
release series for the next release so layers can show compatibility
correctly.
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add vc4-kms-dsi-ili9881-7inch.dtbo for the Raspberry Pi Touch
Display 2 to RPI_KERNEL_DEVICETREE_OVERLAYS.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
- remove DRIDRIVERS variable
Both are not available in current mesa recipe
This fixes:
ERROR: mesa-2_25.0.5-r0 do_recipe_qa: QA Issue: mesa: invalid PACKAGECONFIG(s): dri3 [invalid-packageconfig]
ERROR: mesa-2_25.0.5-r0 do_recipe_qa: Fatal QA errors were found, failing task.
Signed-off-by: Markus Volk <f_l_k@t-online.de>
With:
https://lists.openembedded.org/g/bitbake-devel/message/17508
there are WARNINGs like:
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:21 has a lack of whitespace around the assignment: 'PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:22 has a lack of whitespace around the assignment: 'PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:23 has a lack of whitespace around the assignment: 'PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:24 has a lack of whitespace around the assignment: 'PITFT28c="${@bb.utils.contains("MACHINE_FEATURES", "pitft28c", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:25 has a lack of whitespace around the assignment: 'PITFT35r="${@bb.utils.contains("MACHINE_FEATURES", "pitft35r", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:27 has a lack of whitespace around the assignment: 'VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:38 has a lack of whitespace around the assignment: 'WM8960="${@bb.utils.contains("MACHINE_FEATURES", "wm8960", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:14 has a lack of whitespace around the assignment: 'export CC7="${CC}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:15 has a lack of whitespace around the assignment: 'export LD7="${LD}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:16 has a lack of whitespace around the assignment: 'export OBJCOPY7="${OBJCOPY}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:17 has a lack of whitespace around the assignment: 'export OBJDUMP7="${OBJDUMP}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:18 has a lack of whitespace around the assignment: 'export CC8="${CC}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:19 has a lack of whitespace around the assignment: 'export LD8="${LD}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:20 has a lack of whitespace around the assignment: 'export OBJCOPY8="${OBJCOPY}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:21 has a lack of whitespace around the assignment: 'export OBJDUMP8="${OBJDUMP} -maarch64"'
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Fix the resource exhaustion problem on the build infrastructure.
Suggested-by: Stu Westerman @stu-spp
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
