bcm2835: Compile examples correct LDFLAGS to avoid HASH errors

ERROR: bcm2835-1.50-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary:
'build-rpi-master/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/bcm2835/1.50-r0/packages-split/bcm2835-tests/usr/lib/bcm2835/spi'
No GNU_HASH in the elf binary:
'build-rpi-master/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/bcm2835/1.50-r0/packages-split/bcm2835-tests/usr/lib/bcm2835/event'
No GNU_HASH in the elf binary:
'build-rpi-master/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/bcm2835/1.50-r0/packages-split/bcm2835-tests/usr/lib/bcm2835/gpio'
No GNU_HASH in the elf binary:
'build-rpi-master/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/bcm2835/1.50-r0/packages-split/bcm2835-tests/usr/lib/bcm2835/i2c'
No GNU_HASH in the elf binary:
'build-rpi-master/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/bcm2835/1.50-r0/packages-split/bcm2835-tests/usr/lib/bcm2835/blink'
No GNU_HASH in the elf binary:
'build-rpi-master/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/bcm2835/1.50-r0/packages-split/bcm2835-tests/usr/lib/bcm2835/spin'
No GNU_HASH in the elf binary:
'build-rpi-master/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/bcm2835/1.50-r0/packages-split/bcm2835-tests/usr/lib/bcm2835/input'
No GNU_HASH in the elf binary:
'build-rpi-master/tmp/work/cortexa7hf-neon-vfpv4-poky-linux-gnueabi/bcm2835/1.50-r0/packages-split/bcm2835-tests/usr/lib/bcm2835/pwm'
[ldflags]

Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>

.gitignore

@@ -0,0 +1,5 @@
+build*
+*~
+.*.swp
+*.orig
+*.rej

README

@@ -1,89 +1,59 @@
-                .8MMMMMMMM       MMMMMMMM8.
-              MMM77$$$$$$7MM   MM$$$$$$$$$MMM
-              MM$$$$$$$$$$$$M M$$$$$$$$$$$$MM
-              MO7$$$$$8$$$$$MMM$$$$$N7$$$$7DM
-               M7$$$$$$$M7$$MMM$$7M$$$$$$$7M.
-                M7$$$$$$$$MMMMMMM$$$$$$$$7M.
-                 MM$$$$$$7MMMMMMM$$$$$$$MM
-                  .MM$7MMMMMMMMMMMMM7$MM.
-                 .MM8ZZZMMZZZZZZZMZZZ$MM.
-                .MOZZZZMMZZZZZZZZZM8ZZZZMM
-                MZZMMMZZZZ8MMMMM$ZZZ$MMZZMM
-              .MMMMMZZZZZZZZMMMZZZZZZZMMMMM:
-              M8ZZMMZZZZZZZZNMZZZZZZZZZMMZZMM
-             MZZZZMZZZZZZZZZMMMZZZZZZZZ8MZZZMM
-            .MZZZZMZZZZZZZZZMMMZZZZZZZZMMZZZ8M
-            .MZZZMMMZZZZZZZMMMMM$ZZZZZ$MMZZZMM
-             MMZZMMMMMM8MMNZZZZZ8MMMMMMMMMZZM
-              MMMMZMMMMMMZZZZZZZZZMMMM$ZZZMM.
-               MMZZZZZMMMZZZZZZZZZMMMZZZZZMM
-                MZZZZZZZMNZZZZZZZMMZZZZZZZM.
-                    MMMMMZZZZZZZZZMMMM.
-                      .MMDZZZZZZZMMD
-                        .MMMMMMMM,
-                           ....
-
+Quick links
+===========
+Git repository web frontend:
+    http://git.yoctoproject.org/cgit/cgit.cgi/meta-raspberrypi/
+Mailing list (yocto mailing list):
+    yocto@yoctoproject.org
+Issues management (redmine):
+    http://redmine.gherzan.ro/projects/meta-raspberrypi
 
 
 Contents:
 =========
-1. OpenEmbedded BSP Layer - RaspberryPi
-2. Yocto BSP Layer - RaspberryPi
-    2.A. Compressed deployed files
-    2.B. GPU memory
-    2.C. Add purchased license codecs
-    2.D. Disable overscan
-    2.E. Set overclocking options
-3. Contribution
+1. Description
+2. Yocto BSP Layer - Raspberry Pi
+    2.A. How to use it
+    2.B. Images
+3. Optional build configuration
+    3.A. Compressed deployed files
+    3.B. GPU memory
+    3.C. Add purchased license codecs
+    3.D. Disable overscan
+    3.E. Set overclocking options
+    3.F. Video camera support with V4L2 drivers
+    3.G. Enable offline compositing support
+    3.H. Enable kgdb over console support
+    3.I. Boot to U-Boot
+    3.J. Image with Initramfs
+    3.K. Device tree support
+    3.L. Enable SPI bus
+    3.M. Enable I2C
+    3.N. Enable PiTFT support
+    3.O. Enable UART support
+4. Extra apps
+    4.A. omxplayer
+5. Board Configuration
+    5.A. Audio Routing
+6. Source code and mirrors
+7. Contribution
+    7.A. Mailing List
+    7.B. Redmine
+8. Maintainers
 
 
-
-1. OpenEmbedded BSP Layer - RaspberryPi
-=======================================
+1. Description
+==============
 
 This is the general hardware specific BSP overlay for the RaspberryPi device.
-It should be used with openembedded-core (not old-style org.openembedded.dev).
 
 More information can be found at:
-
                    http://www.raspberrypi.org/ (Official Site)
-                   http://www.distant-earth.com/ (My Site)
-
-Build scripts patched to support making a firmware image for the RaspberryPi
-with Angstrom can be found at:
-
-                   http://github.com/Angstrom-distribution/setup-scripts
-
-When not depending on meta-openembedded and not using systemd, you may need to
-mask few recipes requiring systemd or other recipes not included in your
-distribution of choice.
-
-You can achieve this by adding something like the following to local.conf:
-
-BBMASK = "meta-raspberrypi/recipes-multimedia/libav|\
-meta-raspberrypi/recipes-core/systemd"
-
-You can adjust the BBMASK for any .bbappends that your distribution does not
-contain recipes for.
 
 The core BSP part of meta-raspberrypi should work with different
 OpenEmbedded/Yocto distributions and layer stacks, such as:
-
 * Distro-less (only with OE-Core).
-* Angstrom (main focus of testing).
-* Yocto/Poky.
-
-This layer in its entirety depends on:
-
-URI: git://git.openembedded.org/openembedded-core
-branch: master
-revision: HEAD
-
-URI: git://git.openembedded.org/meta-openembedded
-branch: master
-revision: HEAD
-
-
+* Angstrom.
+* Yocto/Poky (main focus of testing).
 
 2. Yocto BSP Layer - RaspberryPi
 ================================
@@ -95,30 +65,53 @@ branch: master
 revision: HEAD
 
 URI: git://git.openembedded.org/meta-openembedded
+layers: meta-oe, meta-multimedia
 branch: master
 revision: HEAD
 
-How to use it:
-
-1. source poky/oe-init-build-env rpi-build
-2. Add needed layers to bblayers.conf:
+2.A. How to use it
+==================
+a. source poky/oe-init-build-env rpi-build
+b. Add needed layer to bblayers.conf:
     - meta-raspberrypi
-    - meta-openembedded/meta-oe
-3  Set MACHINE to raspberrypi in local.conf
-4. bitbake rpi-hwup-image
-5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
-6. Boot your RPI.
+c. Set MACHINE in local.conf to one of the supported boards:
+    - raspberrypi
+    - raspberrypi0
+    - raspberrypi2
+    - raspberrypi3
+d. bitbake rpi-hwup-image
+e. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
+f. Boot your RPI.
 
-2.A. Optional - compressed deployed files:
-==========================================
+2.B. Images
+-===========
+* rpi-hwup-image
+    Hardware up image
+* rpi-basic-image
+    Based on rpi-hwup-image with some added features (ex: splash)
+* rpi-test-image
+    Image based on rpi-basic-image which includes most of the packages in this
+    layer and some media samples.
+
+3. Optional build configuration
+===============================
+
+There are a set of ways in which a user can influence different paramenters of the build.
+We list here the ones that are closely related to this BSP or specific to it. For the rest
+please check: http://www.yoctoproject.org/docs/latest/ref-manual/ref-manual.html
+
+3.A. Compressed deployed files
+==============================
 1. Overwrite IMAGE_FSTYPES in local.conf
-	IMAGE_FSTYPES = "tar.bz2 ext3.xz rpi-sdimg.xz
+    IMAGE_FSTYPES = "tar.bz2 ext3.xz"
 2. Overwrite SDIMG_ROOTFS_TYPE in local.conf
-	SDIMG_ROOTFS_TYPE = "ext3.xz"
+    SDIMG_ROOTFS_TYPE = "ext3.xz"
+3. Overwrite SDIMG_COMPRESSION in local.conf
+    SDIMG_COMPRESSION = "xz"
 *Accommodate the values above to your own needs (ex: ext3 / ext4).
 
-2.B. Optional - GPU memory:
-===========================
+3.B. GPU memory
+===============
 Variable    : Details
 GPU_MEM     : GPU memory in megabyte. Sets the memory split between the ARM and
               GPU. ARM gets the remaining memory. Min 16. Default 64.
@@ -126,9 +119,11 @@ GPU_MEM_256 : GPU memory in megabyte for the 256MB Raspberry Pi. Ignored by the
               512MB RP. Overrides gpu_mem. Max 192. Default not set.
 GPU_MEM_512 : GPU memory in megabyte for the 512MB Raspberry Pi. Ignored by the
               256MB RP. Overrides gpu_mem. Max 448. Default not set.
+GPU_MEM_1024: GPU memory in megabyte for the 1024MB Raspberry Pi. Ignored by the
+              256MB/512MB RP. Overrides gpu_mem. Max 944. Default not set.
 
-2.C.Optional - Add purchased license codecs:
-============================================
+3.C. Add purchased license codecs
+=================================
 To add you own licenses use variables KEY_DECODE_MPG2 and KEY_DECODE_WVC1 in
 local.conf. Example:
 KEY_DECODE_MPG2 = "12345678"
@@ -136,15 +131,15 @@ KEY_DECODE_WVC1 = "12345678"
 You can supply more licenses separated by comma. Example:
 KEY_DECODE_WVC1 = "0x12345678,0xabcdabcd,0x87654321"
 
-2.D. Optional - Disable overscan:
-=================================
+3.D. Disable overscan
+=====================
 By default the GPU adds a black border around the video output to compensate for
 TVs which cut off part of the image. To disable this set this variable in
 local.conf:
-DISALE_OVERSCAN = "0"
+DISABLE_OVERSCAN = "1"
 
-2.E. Optional - Set overclocking options:
-=========================================
+3.E. Set overclocking options
+=============================
 The Raspberry PI can be overclocked. As of now overclocking up to the "Turbo
 Mode" is officially supported by the raspbery and does not void warranty.
 Check the config.txt for a detailed description of options and modes. Example:
@@ -154,29 +149,201 @@ CORE_FREQ = "500"
 SDRAM_FREQ = "500"
 OVER_VOLTAGE = "6"
 
+3.F. Video camera support with V4L2 drivers
+===========================================
+Set this variable to enable support for the video camera (Linux 3.12.4+ required)
+VIDEO_CAMERA = "1"
 
+3.G. Enable offline compositing support
+=======================================
+Set this variable to enable support for dispmanx offline compositing
+DISMANX_OFFLINE = "1"
 
-3. Contributing
+This will enable the firmware to fall back to off-line compositing of
+Dispmanx elements. Normally the compositing is done on-line, during scanout,
+but cannot handle too many elements. With off-line enabled, an off-screen
+buffer is allocated for compositing. When scene complexity (number and sizes
+of elements) is high, compositing will happen off-line into the buffer.
+
+Heavily recommended for Wayland/Weston.
+
+See: http://wayland.freedesktop.org/raspberrypi.html
+
+3.H. Enable kgdb over console support
+=====================================
+To add the kdbg over console (kgdboc) parameter to the kernel command line,
+set this variable in local.conf:
+ENABLE_KGDB = "1"
+
+3.I. Boot to U-Boot
+===================
+To have u-boot load kernel image, set in your local.conf
+KERNEL_IMAGETYPE = "uImage"
+
+This will make kernel.img be u-boot image which will load uImage.
+By default, kernel.img is the actual kernel image (ex. Image).
+
+3.J. Image with Initramfs
+=========================
+To build an initramfs image :
+    * Set this 3 kernel variables (in linux-raspberrypi.inc for example)
+        - kernel_configure_variable BLK_DEV_INITRD y
+        - kernel_configure_variable INITRAMFS_SOURCE ""
+        - kernel_configure_variable RD_GZIP y
+    * Set the yocto variables (in linux-raspberrypi.inc for example)
+        - INITRAMFS_IMAGE = "<a name for your initramfs image>"
+        - INITRAMFS_IMAGE_BUNDLE = "1"
+    * Set the meta-rasberrypi variable (in raspberrypi.conf for example)
+        - KERNEL_INITRAMFS = "-initramfs"
+
+3.K. Device tree support
+=========================
+Device tree for RPi is only supported when using linux-raspberrypi 3.18+
+kernels.
+
+    * Set KERNEL_DEVICETREE (in conf/machine/raspberrypi.conf)
+        - the trailer is added to the kernel image before kernel install task.
+          While creating the SDCard image, this modified kernel is put on
+          boot partition (as kernel.img) as well as DeviceTree blobs (.dtb files).
+
+NOTE: KERNEL_DEVICETREE is default enabled for kernel >= 3.18 and always disabled for
+      older kernel versions.
+
+3.L. Enable SPI bus
+====================
+When using device tree kernels, set this variable to enable the SPI bus
+ENABLE_SPI_BUS = "1"
+
+3.M. Enable I2C
+===============
+When using device tree kernels, set this variable to enable I2C
+ENABLE_I2C = "1"
+
+3.N. Enable PiTFT support
+=========================
+Basic support for using PiTFT screens can be enabled by adding
+below in local.conf:
+
+MACHINE_FEATURES += "pitft"
+  - This will enable SPI bus and i2c device-trees, it will also setup
+    framebuffer for console and x server on PiTFT.
+
+NOTE: To get this working the overlay for the PiTFT model must be build,
+      added and specified as well (dtoverlay=<driver> in config.txt)
+
+Below is a list of currently supported PiTFT models in meta-raspberrypi,
+the modelname should be added as a MACHINE_FEATURES in local.conf like below:
+    - MACHINE_FEATURES += "pitft <modelname>"
+
+List of currently supported models:
+    - pitft22
+    - pitft28r
+
+3.O. Enable UART
 ===============
 
-To contribute to this layer you should send the patches for review to the
-mailing list.
+RaspberryPi 1, 2 and CM will have UART console enabled by default.
 
-Mailing list:
+RaspberryPi 3 does not have the UART enabled by default because this needs a
+fixed core frequency and enable_uart wil set it to the minimum. Certain
+operations - 60fps h264 decode, high quality deinterlace - which aren't
+performed on the ARM may be affected, and we wouldn't want to do that to users
+who don't want to use the serial port. Users who want serial console support on
+RaspberryPi3 will have to explicitely set in local.conf: ENABLE_UART = "1".
 
-    https://lists.yoctoproject.org/listinfo/yocto
+Ref.: https://github.com/raspberrypi/firmware/issues/553
+      https://github.com/RPi-Distro/repo/issues/22
 
-Source code:
+4. Extra apps
+=============
 
+4.A. omxplayer
+==============
+omxplayer depends on libav which has a commercial license. So in order to be
+able to compile omxplayer you will need to whiteflag the commercial license
+adding to you local.conf:
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+5. Board Configuration
+======================
+
+5.A. Audio Routing
+==================
+To load audio driver
+
+    modprobe snd-bcm2835
+
+To test audio playback
+
+    e.g. aplay test.wav
+
+Note that without HDMI connected this emits audio from the 3.5in jack connector
+as expected. However With an HDMI display connected there is no audio output from
+the jack connector.
+
+To force the audio routing via the 3.5in jack connector use
+
+    amixer cset numid=3 1
+
+Options to amixer cset are:
+
+    0=auto
+    1=headphones
+    2=hdmi
+
+6. Source code and mirrors
+==========================
+
+Main repo:
     git://git.yoctoproject.org/meta-raspberrypi
     http://git.yoctoproject.org/git/meta-raspberrypi
-    https://github.com/djwillis/meta-raspberrypi
 
-When sending patches, please use something like:
+Github mirror:
+    https://github.com/agherzan/meta-raspberrypi
 
-git send-email --to yocto@yoctoproject.org \
---subject-prefix='meta-raspberrypi][PATCH'
+Bitbucket mirror:
+    https://bitbucket.org/agherzan/meta-raspberrypi
 
 
-Layer maintainers: John Willis <John.Willis at distant-earth.com>
-                   Andrei Gherzan <andrei at gherzan.ro>
+7. Contributing
+===============
+
+7.A. Mailing list
+=================
+The main communication tool we use is a mailing list:
+    yocto@yoctoproject.org
+    https://lists.yoctoproject.org/listinfo/yocto
+
+Feel free to ask any kind of questions but always prepend your email subject
+with "[meta-raspberrypi]". This is because we use the 'yocto' mailing list and
+not a perticular 'meta-raspberrypi' mailing list.
+
+To contribute to this layer you should send the patches for review to the
+above specified mailing list.
+The patches should be compliant with the openembedded patch guidelines:
+http://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
+
+
+When creating patches, please use something like:
+
+    git format-patch -s --subject-prefix='meta-raspberrypi][PATCH' origin
+
+When sending patches to mailing list, please use something like:
+
+    git send-email --to yocto@yoctoproject.org <generated patch>
+
+7.B. Github issues
+==================
+In order to manage and trace the meta-raspberrypi issues, we use github issues:
+    https://github.com/agherzan/meta-raspberrypi/issues
+
+If you push patches which have a github issue associated, please provide the
+issue number in the commit log just before "Signed-off-by" line(s). Example line
+for a bug:
+    [Issue #13]
+
+
+8. Maintainers
+==============
+
+    Andrei Gherzan <andrei at gherzan.ro>

classes/linux-raspberrypi-base.bbclass

@@ -0,0 +1,39 @@
+inherit linux-kernel-base
+
+
+def get_dts(d, ver):
+    staging_dir = d.getVar("STAGING_KERNEL_BUILDDIR", True)
+    dts = d.getVar("KERNEL_DEVICETREE", True)
+
+    # d.getVar() might return 'None' as a normal string
+    # leading to 'is None' check isn't enough.
+    # TODO: Investigate if this is a bug in bitbake
+    if ver is None or ver == "None":
+        ''' if 'ver' isn't set try to grab the kernel version
+        from the kernel staging '''
+        ver = get_kernelversion_file(staging_dir)
+
+    if ver is not None:
+        min_ver = ver.split('.', 3)
+    else:
+        return dts
+
+    # Always turn off device tree support for kernel's < 3.18
+    try:
+        if int(min_ver[0]) <= 3:
+            if int(min_ver[1]) < 18:
+                dts = ""
+    except IndexError:
+        min_ver = None
+
+    return dts
+
+
+def split_overlays(d, out):
+    dts = get_dts(d, None)
+    if out:
+        overlays = oe.utils.str_filter_out('\S+\-overlay\.dtb$', dts, d)
+    else:
+        overlays = oe.utils.str_filter('\S+\-overlay\.dtb$', dts, d)
+
+    return overlays

classes/sdcard_image-rpi.bbclass

@@ -1,4 +1,5 @@
 inherit image_types
+inherit linux-raspberrypi-base
 
 #
 # Create an image that can by written onto a SD card using dd.
@@ -13,60 +14,74 @@ inherit image_types
 #                                                     Default Free space = 1.3x
 #                                                     Use IMAGE_OVERHEAD_FACTOR to add more space
 #                                                     <--------->
-#            4MiB              20MiB           SDIMG_ROOTFS
+#            4MiB              40MiB           SDIMG_ROOTFS
 # <-----------------------> <----------> <---------------------->
 #  ------------------------ ------------ ------------------------
 # | IMAGE_ROOTFS_ALIGNMENT | BOOT_SPACE | ROOTFS_SIZE            |
 #  ------------------------ ------------ ------------------------
 # ^                        ^            ^                        ^
 # |                        |            |                        |
-# 0                      4MiB     4MiB + 20MiB       4MiB + 20Mib + SDIMG_ROOTFS
+# 0                      4MiB     4MiB + 40MiB       4MiB + 40Mib + SDIMG_ROOTFS
 
+# This image depends on the rootfs image
+IMAGE_TYPEDEP_rpi-sdimg = "${SDIMG_ROOTFS_TYPE}"
 
 # Set kernel and boot loader
 IMAGE_BOOTLOADER ?= "bcm2835-bootfiles"
 
+# Set initramfs extension
+KERNEL_INITRAMFS ?= ""
+
+# Kernel image name
+SDIMG_KERNELIMAGE_raspberrypi  ?= "kernel.img"
+SDIMG_KERNELIMAGE_raspberrypi2 ?= "kernel7.img"
+
 # Boot partition volume id
 BOOTDD_VOLUME_ID ?= "${MACHINE}"
 
 # Boot partition size [in KiB] (will be rounded up to IMAGE_ROOTFS_ALIGNMENT)
-BOOT_SPACE ?= "20480"
+BOOT_SPACE ?= "40960"
 
 # Set alignment to 4MB [in KiB]
 IMAGE_ROOTFS_ALIGNMENT = "4096"
 
 # Use an uncompressed ext3 by default as rootfs
 SDIMG_ROOTFS_TYPE ?= "ext3"
-SDIMG_ROOTFS = "${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
+SDIMG_ROOTFS = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
 
 IMAGE_DEPENDS_rpi-sdimg = " \
 			parted-native \
 			mtools-native \
 			dosfstools-native \
-			virtual/kernel \
+			virtual/kernel:do_deploy \
 			${IMAGE_BOOTLOADER} \
+			${@bb.utils.contains('KERNEL_IMAGETYPE', 'uImage', 'u-boot', '',d)} \
 			"
 
 # SD card image name
 SDIMG = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.rpi-sdimg"
 
+# Compression method to apply to SDIMG after it has been created. Supported
+# compression formats are "gzip", "bzip2" or "xz". The original .rpi-sdimg file
+# is kept and a new compressed file is created if one of these compression
+# formats is chosen. If SDIMG_COMPRESSION is set to any other value it is
+# silently ignored.
+#SDIMG_COMPRESSION ?= ""
+
 # Additional files and/or directories to be copied into the vfat partition from the IMAGE_ROOTFS.
 FATPAYLOAD ?= ""
 
-IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
-
 IMAGE_CMD_rpi-sdimg () {
 
 	# Align partitions
 	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
 	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
-	ROOTFS_SIZE=`du -bks ${SDIMG_ROOTFS} | awk '{print $1}'`
-        # Round up RootFS size to the alignment size as well
-	ROOTFS_SIZE_ALIGNED=$(expr ${ROOTFS_SIZE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
-	ROOTFS_SIZE_ALIGNED=$(expr ${ROOTFS_SIZE_ALIGNED} - ${ROOTFS_SIZE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
-	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + ${ROOTFS_SIZE_ALIGNED})
+	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE)
 
-	echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS ${ROOTFS_SIZE_ALIGNED} KiB"
+	echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTFS_SIZE KiB"
+
+	# Check if we are building with device tree support
+	DTS="${@get_dts(d, None)}"
 
 	# Initialize sdcard image file
 	dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE}
@@ -82,9 +97,38 @@ IMAGE_CMD_rpi-sdimg () {
 
 	# Create a vfat image with boot files
 	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
+	rm -f ${WORKDIR}/boot.img
 	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
 	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/* ::/
-	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::kernel.img
+	if test -n "${DTS}"; then
+		# Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' string and will be put in a dedicated folder
+		DT_OVERLAYS="${@split_overlays(d, 0)}"
+		DT_ROOT="${@split_overlays(d, 1)}"
+
+		# Copy board device trees to root folder
+		for DTB in ${DT_ROOT}; do
+			DTB_BASE_NAME=`basename ${DTB} .dtb`
+
+			mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::${DTB_BASE_NAME}.dtb
+		done
+
+		# Copy device tree overlays to dedicated folder
+		mmd -i ${WORKDIR}/boot.img overlays
+		for DTB in ${DT_OVERLAYS}; do
+			DTB_BASE_NAME=`basename ${DTB} .dtb`
+
+			mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::overlays/${DTB_BASE_NAME}.dtb
+		done
+	fi
+	case "${KERNEL_IMAGETYPE}" in
+	"uImage")
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::${SDIMG_KERNELIMAGE}
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::uImage
+		;;
+	*)
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::${SDIMG_KERNELIMAGE}
+		;;
+	esac
 
 	if [ -n ${FATPAYLOAD} ] ; then
 		echo "Copying payload into VFAT"
@@ -95,8 +139,8 @@ IMAGE_CMD_rpi-sdimg () {
 	fi
 
 	# Add stamp file
-	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
-	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info ::
+	echo "${IMAGE_NAME}" > ${WORKDIR}/image-version-info
+	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}/image-version-info ::
 
 	# Burn Partitions
 	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
@@ -107,6 +151,19 @@ IMAGE_CMD_rpi-sdimg () {
 	else
 		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
 	fi
+
+	# Optionally apply compression
+	case "${SDIMG_COMPRESSION}" in
+	"gzip")
+		gzip -k9 "${SDIMG}"
+		;;
+	"bzip2")
+		bzip2 -k9 "${SDIMG}"
+		;;
+	"xz")
+		xz -k "${SDIMG}"
+		;;
+	esac
 }
 
 ROOTFS_POSTPROCESS_COMMAND += " rpi_generate_sysctl_config ; "

conf/layer.conf

@@ -7,7 +7,7 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb \
 
 BBFILE_COLLECTIONS += "raspberrypi"
 BBFILE_PATTERN_raspberrypi := "^${LAYERDIR}/"
-BBFILE_PRIORITY_raspberrypi = "6"
+BBFILE_PRIORITY_raspberrypi = "9"
 
 # Additional license directories.
 LICENSE_PATH += "${LAYERDIR}/files/custom-licenses"

conf/machine/include/rpi-base.inc

@@ -0,0 +1,53 @@
+include conf/machine/include/rpi-default-settings.inc
+include conf/machine/include/rpi-default-versions.inc
+include conf/machine/include/rpi-default-providers.inc
+
+SOC_FAMILY = "rpi"
+include conf/machine/include/soc-family.inc
+
+IMAGE_FSTYPES ?= "tar.bz2 ext3 rpi-sdimg"
+
+XSERVER = " \
+    xserver-xorg \
+    xf86-input-evdev \
+    xf86-input-mouse \
+    xf86-input-keyboard \
+    xf86-video-fbdev \
+    "
+
+# Really supported starting from linux-raspberrypi 3.18.y only
+KERNEL_DEVICETREE ?= " \
+    bcm2708-rpi-b.dtb \
+    bcm2708-rpi-b-plus.dtb \
+    bcm2709-rpi-2-b.dtb \
+    bcm2710-rpi-3-b.dtb \
+    \
+    overlays/hifiberry-amp-overlay.dtb \
+    overlays/hifiberry-dac-overlay.dtb \
+    overlays/hifiberry-dacplus-overlay.dtb \
+    overlays/hifiberry-digi-overlay.dtb \
+    overlays/i2c-rtc-overlay.dtb \
+    overlays/iqaudio-dac-overlay.dtb \
+    overlays/iqaudio-dacplus-overlay.dtb \
+    overlays/lirc-rpi-overlay.dtb \
+    overlays/pitft22-overlay.dtb \
+    overlays/pitft28-resistive-overlay.dtb \
+    overlays/pps-gpio-overlay.dtb \
+    overlays/rpi-ft5406-overlay.dtb \
+    overlays/w1-gpio-overlay.dtb \
+    overlays/w1-gpio-pullup-overlay.dtb \
+    overlays/pi3-miniuart-bt-overlay.dtb \
+    "
+KERNEL_IMAGETYPE ?= "Image"
+
+MACHINE_FEATURES += "apm usbhost keyboard vfat ext2 screen touchscreen alsa bluetooth wifi sdio"
+
+# Raspberry Pi has no hardware clock
+MACHINE_FEATURES_BACKFILL_CONSIDERED = "rtc"
+
+MACHINE_EXTRA_RRECOMMENDS += " kernel-modules"
+
+# Set Raspberrypi splash image
+SPLASH = "psplash-raspberrypi"
+
+IMAGE_BOOT_FILES ?= "bcm2835-bootfiles/* ${KERNEL_IMAGETYPE};${SDIMG_KERNELIMAGE}"

conf/machine/include/rpi-default-providers.inc

@@ -1,7 +1,9 @@
 # RaspberryPi BSP default providers
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-raspberrypi"
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-raspberrypi"
+PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
 PREFERRED_PROVIDER_virtual/egl ?= "userland"
 PREFERRED_PROVIDER_virtual/libgles2 ?= "userland"
-PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-raspberrypi"
+PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
+PREFERRED_PROVIDER_jpeg ?= "jpeg"

conf/machine/include/rpi-default-versions.inc

@@ -1,2 +1,3 @@
 # RaspberryPi BSP default versions
 
+PREFERRED_VERSION_linux-raspberrypi ?= "4.1.%"

conf/machine/include/tune-arm1176jzf-s.inc

@@ -4,8 +4,12 @@ require conf/machine/include/arm/arch-armv6.inc
 
 TUNEVALID[arm1176jzfs] = "Enable arm1176jzfs specific processor optimizations"
 TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "arm1176jzfs", "-mtune=arm1176jzf-s", "", d)}"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "vfp", "-mfpu=vfp", "", d)}"
 
-AVAILTUNES += "arm1176jzfs"
-TUNE_FEATURES_tune-arm1176jzfs = "${TUNE_FEATURES_tune-armv6} arm1176jzfs"
+AVAILTUNES += "arm1176jzfs arm1176jzfshf"
 ARMPKGARCH_tune-arm1176jzfs = "arm1176jzfs"
+ARMPKGARCH_tune-arm1176jzfshf = "arm1176jzfs"
+TUNE_FEATURES_tune-arm1176jzfs = "${TUNE_FEATURES_tune-armv6} arm1176jzfs"
+TUNE_FEATURES_tune-arm1176jzfshf = "${TUNE_FEATURES_tune-arm1176jzfs} callconvention-hard"
 PACKAGE_EXTRA_ARCHS_tune-arm1176jzfs = "${PACKAGE_EXTRA_ARCHS_tune-armv6}"
+PACKAGE_EXTRA_ARCHS_tune-arm1176jzfshf = "${PACKAGE_EXTRA_ARCHS_tune-armv6hf} arm1176jzfshf-vfp"

conf/machine/raspberrypi.conf

@@ -1,34 +1,12 @@
 #@TYPE: Machine
 #@NAME: RaspberryPi Development Board
 #@DESCRIPTION: Machine configuration for the RaspberryPi http://www.raspberrypi.org/ Board
-#@MAINTAINER: John Willis
 
-include conf/machine/include/rpi-default-settings.inc
-include conf/machine/include/rpi-default-versions.inc
-include conf/machine/include/rpi-default-providers.inc
+DEFAULTTUNE ?= "arm1176jzfshf"
+
 require conf/machine/include/tune-arm1176jzf-s.inc
-
-IMAGE_FSTYPES ?= "tar.bz2 ext3 rpi-sdimg"
+include conf/machine/include/rpi-base.inc
 
 SERIAL_CONSOLE = "115200 ttyAMA0"
 
-MACHINE_KERNEL_PR = "r5"
-
-XSERVER = " \
-	xserver-xorg \
-	xf86-input-evdev \
-	xf86-input-mouse \
-	xf86-input-keyboard \
-	xf86-video-fbdev \
-"
-
-KERNEL_IMAGETYPE = "Image"
-
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost keyboard vfat ext2 screen touchscreen alsa bluetooth wifi sdio"
-
-#RaspberryPi has no hardware clock
-MACHINE_FEATURES_BACKFILL_CONSIDERED = "rtc"
-
-MACHINE_EXTRA_RRECOMMENDS += " \
-	kernel-modules \
-"
+UBOOT_MACHINE = "rpi_config"

conf/machine/raspberrypi0.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: RaspberryPi Zero Development Board
+#@DESCRIPTION: Machine configuration for the RaspberryPi Zero board (https://www.raspberrypi.org/blog/raspberry-pi-zero)
+
+MACHINEOVERRIDES = "raspberrypi:${MACHINE}"
+include conf/machine/raspberrypi.conf
+
+SERIAL_CONSOLE = "115200 ttyAMA0"

conf/machine/raspberrypi2.conf

@@ -0,0 +1,12 @@
+#@TYPE: Machine
+#@NAME: RaspberryPi 2 Development Board
+#@DESCRIPTION: Machine configuration for the RaspberryPi 2
+
+DEFAULTTUNE ?= "cortexa7thf-neon-vfpv4"
+
+require conf/machine/include/tune-cortexa7.inc
+include conf/machine/include/rpi-base.inc
+
+SERIAL_CONSOLE = "115200 ttyAMA0"
+
+UBOOT_MACHINE = "rpi_2_config"

conf/machine/raspberrypi3.conf

@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: RaspberryPi 3 Development Board
+#@DESCRIPTION: Machine configuration for the RaspberryPi 3
+
+MACHINEOVERRIDES = "raspberrypi2:${MACHINE}"
+
+MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-brcm43430"
+
+include conf/machine/raspberrypi2.conf
+
+SERIAL_CONSOLE = "115200 ttyS0"

recipes-bcm/bootfiles/bcm2835-bootfiles.bb

@@ -1,37 +0,0 @@
-DESCRIPTION = "Closed source binary files to help boot the ARM on the BCM2835."
-LICENSE = "Proprietary"
-
-LIC_FILES_CHKSUM = "file://LICENCE.broadcom;md5=e86e693d19572ee64cc8b17fb062faa9"
-
-include ../common/firmware.inc
-
-RDEPENDS_${PN} = "rpi-config"
-
-COMPATIBLE_MACHINE = "raspberrypi"
-
-SRC_URI = " \
-        git://github.com/raspberrypi/firmware.git;protocol=git;branch=master  \
-"
-
-S = "${WORKDIR}/git/boot"
-
-PR = "r3"
-
-addtask deploy before do_package after do_install
-
-do_deploy() {
-	install -d ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles
-	for i in *.elf ; do
-		cp $i ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles
-	done
-	for i in *.dat ; do
-		cp $i ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles
-	done
-	for i in *.bin ; do
-		cp $i ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles
-	done
-	# Add stamp in deploy directory
-	touch ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/${PN}-${PV}.stamp
-}
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"

recipes-bcm/bootfiles/rpi-config_0.1.bb

@@ -1,57 +0,0 @@
-DESCRIPTION = "Commented config.txt file for the Raspberry Pi. \
-               The Raspberry Pi config.txt file is read by the GPU before \
-               the ARM core is initialised. It can be used to set various \
-               system configuration parameters."
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
-
-COMPATIBLE_MACHINE = "raspberrypi"
-
-SRCREV = "62bf3e9db62f547eb1a2a352dde957d2f94bd216"
-SRC_URI = "git://github.com/Evilpaul/RPi-config.git;protocol=git;branch=master \
-          "
-
-S = "${WORKDIR}/git"
-
-PR = "r3"
-
-addtask deploy before do_package after do_install
-
-do_deploy() {
-	install -d ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles
-	cp config.txt ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/
-	if [ -n "${KEY_DECODE_MPG2}" ]; then
-		sed -i '/#decode_MPG2/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/config.txt
-	fi
-	if [ -n "${KEY_DECODE_WVC1}" ]; then
-		sed -i '/#decode_WVC1/ c\decode_MVC1=${KEY_DECODE_WVC1}' ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/config.txt
-	fi
-	if [ -n "${DISABLE_OVERSCAN}" ]; then
-		sed -i '/#disable_overscan/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/config.txt
-	fi
-	if [ -n "${ARM_FREQ}" ]; then
-		sed -i '/#arm_freq/ c\arm_freq=${ARM_FREQ}' ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/config.txt
-	fi
-	if [ -n "${CORE_FREQ}" ]; then
-		sed -i '/#core_freq/ c\core_freq=${CORE_FREQ}' ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/config.txt
-	fi
-	if [ -n "${SDRAM_FREQ}" ]; then
-		sed -i '/#sdram_freq/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/config.txt
-	fi
-	if [ -n "${OVER_VOLTAGE}" ]; then
-		sed -i '/#over_voltage/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/config.txt
-	fi
-
-	# GPU memory
-	if [ -n "${GPU_MEM}" ]; then
-		sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/config.txt
-	fi
-	if [ -n "${GPU_MEM_256}" ]; then
-		sed -i '/#gpu_mem_256/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/config.txt
-	fi
-	if [ -n "${GPU_MEM_512}" ]; then
-		sed -i '/#gpu_mem_512/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/config.txt
-	fi
-}
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"

recipes-bcm/common/firmware.inc

@@ -1,6 +0,0 @@
-# 7/1/2013 firmware; this can be overridden from distro config
-RPIFW_SRCREV ?= "0ac68cce44d4550c251172e8524100090e8211fa"
-RPIFW_DATE ?= "20130107"
-
-SRCREV = "${RPIFW_SRCREV}"
-PV = "${RPIFW_DATE}"

recipes-bsp/bootfiles/bcm2835-bootfiles.bb

@@ -0,0 +1,39 @@
+DESCRIPTION = "Closed source binary files to help boot the ARM on the BCM2835."
+LICENSE = "Proprietary"
+
+LIC_FILES_CHKSUM = "file://LICENCE.broadcom;md5=4a4d169737c0786fb9482bb6d30401d1"
+
+inherit deploy
+
+include recipes-bsp/common/firmware.inc
+
+RDEPENDS_${PN} = "rpi-config"
+
+COMPATIBLE_MACHINE = "raspberrypi"
+
+S = "${RPIFW_S}/boot"
+
+PR = "r3"
+
+do_deploy() {
+    install -d ${DEPLOYDIR}/${PN}
+
+    for i in ${S}/*.elf ; do
+        cp $i ${DEPLOYDIR}/${PN}
+    done
+    for i in ${S}/*.dat ; do
+        cp $i ${DEPLOYDIR}/${PN}
+    done
+    for i in ${S}/*.bin ; do
+        cp $i ${DEPLOYDIR}/${PN}
+    done
+
+    # Add stamp in deploy directory
+    touch ${DEPLOYDIR}/${PN}/${PN}-${PV}.stamp
+}
+
+addtask deploy before do_package after do_install
+do_deploy[dirs] += "${DEPLOYDIR}/${PN}"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+

recipes-bsp/bootfiles/rpi-config_git.bb

@@ -0,0 +1,110 @@
+DESCRIPTION = "Commented config.txt file for the Raspberry Pi. \
+               The Raspberry Pi config.txt file is read by the GPU before \
+               the ARM core is initialised. It can be used to set various \
+               system configuration parameters."
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+
+COMPATIBLE_MACHINE = "raspberrypi"
+
+SRCREV = "648ffc470824c43eb0d16c485f4c24816b32cd6f"
+SRC_URI = "git://github.com/Evilpaul/RPi-config.git;protocol=git;branch=master \
+          "
+
+S = "${WORKDIR}/git"
+
+PR = "r4"
+
+PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
+PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}"
+PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}"
+
+inherit deploy
+
+do_deploy() {
+    install -d ${DEPLOYDIR}/bcm2835-bootfiles
+
+    cp ${S}/config.txt ${DEPLOYDIR}/bcm2835-bootfiles/
+
+    if [ -n "${KEY_DECODE_MPG2}" ]; then
+        sed -i '/#decode_MPG2/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${KEY_DECODE_WVC1}" ]; then
+        sed -i '/#decode_WVC1/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${DISABLE_OVERSCAN}" ]; then
+        sed -i '/#disable_overscan/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${ARM_FREQ}" ]; then
+        sed -i '/#arm_freq/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${CORE_FREQ}" ]; then
+        sed -i '/#core_freq/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${SDRAM_FREQ}" ]; then
+        sed -i '/#sdram_freq/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${OVER_VOLTAGE}" ]; then
+        sed -i '/#over_voltage/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # GPU memory
+    if [ -n "${GPU_MEM}" ]; then
+        sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${GPU_MEM_256}" ]; then
+        sed -i '/#gpu_mem_256/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${GPU_MEM_512}" ]; then
+        sed -i '/#gpu_mem_512/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${GPU_MEM_1024}" ]; then
+        sed -i '/#gpu_mem_1024/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Video camera support
+    if [ -n "${VIDEO_CAMERA}" ]; then
+        echo "# Enable video camera" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "start_x=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Offline compositing support
+    if [ -n "${DISPMANX_OFFLINE}" ]; then
+        echo "# Enable offline compositing" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dispmanx_offline=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # SPI bus support
+    if [ -n "${ENABLE_SPI_BUS}" ] || [ "${PITFT}" = "1" ]; then
+        echo "# Enable SPI bus" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtparam=spi=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    if [ -n "${ENABLE_I2C}" ] || [ "${PITFT}" = "1" ]; then
+        echo "# Enable I2C" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtparam=i2c1=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtparam=i2c_arm=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # PiTFT22 display support
+    if [ "${PITFT22}" = "1" ]; then
+        echo "# Enable PITFT22 display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtoverlay=pitft22,rotate=270,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    if [ "${PITFT28r}" = "1" ]; then
+        echo "# Enable PITFT28r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtoverlay=pitft28-resistive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # UART support
+    if [ "${ENABLE_UART}" = "1" ]; then
+        echo "# Enable UART" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "enable_uart=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+}
+
+addtask deploy before do_package after do_install
+do_deploy[dirs] += "${DEPLOYDIR}/bcm2835-bootfiles"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"

recipes-bsp/common/firmware.inc

@@ -0,0 +1,8 @@
+RPIFW_SRCREV ?= "390f53ed0fd79df274bdcc81d99e09fa262f03ab"
+RPIFW_DATE ?= "20160622"
+RPIFW_SRC_URI ?= "git://github.com/raspberrypi/firmware.git;protocol=git;branch=master"
+RPIFW_S ?= "${WORKDIR}/git"
+
+SRC_URI = "${RPIFW_SRC_URI}"
+SRCREV = "${RPIFW_SRCREV}"
+PV = "${RPIFW_DATE}"

recipes-bsp/formfactor/formfactor_0.0.bbappend

@@ -1,2 +1 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-PRINC = "1"

recipes-connectivity/bluez5/bluez5/0001-bcm43xx-Add-bcm43xx-3wire-variant.patch

@@ -0,0 +1,26 @@
+From b4f2b77472aeb967d3a7595e8a965785c7a37c87 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 16 Feb 2016 16:40:46 +0000
+Subject: [PATCH 1/4] bcm43xx: Add bcm43xx-3wire variant
+
+---
+ tools/hciattach.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/tools/hciattach.c b/tools/hciattach.c
+index 59a76a7..5861d33 100644
+--- a/tools/hciattach.c
++++ b/tools/hciattach.c
+@@ -1144,6 +1144,9 @@ struct uart_t uart[] = {
+ 	{ "bcm43xx",    0x0000, 0x0000, HCI_UART_H4,   115200, 3000000,
+ 				FLOW_CTL, DISABLE_PM, NULL, bcm43xx, NULL  },
+ 
++	{ "bcm43xx-3wire",    0x0000, 0x0000, HCI_UART_3WIRE, 115200, 3000000,
++				0, DISABLE_PM, NULL, bcm43xx, NULL  },
++
+ 	{ "ath3k",    0x0000, 0x0000, HCI_UART_ATH3K, 115200, 115200,
+ 			FLOW_CTL, DISABLE_PM, NULL, ath3k_ps, ath3k_pm  },
+ 
+-- 
+1.9.1
+

recipes-connectivity/bluez5/bluez5/0002-bcm43xx-The-UART-speed-must-be-reset-after-the-firmw.patch

@@ -0,0 +1,37 @@
+From e145c9621f976063e5c573db1f2053d906f63427 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 16 Feb 2016 16:39:09 +0000
+Subject: [PATCH 2/4] bcm43xx: The UART speed must be reset after the firmware download
+
+---
+ tools/hciattach_bcm43xx.c | 6 ++----
+ 1 file changed, 2 insertions(+), 4 deletions(-)
+
+diff --git a/tools/hciattach_bcm43xx.c b/tools/hciattach_bcm43xx.c
+index 81f38cb..0b792e0 100644
+--- a/tools/hciattach_bcm43xx.c
++++ b/tools/hciattach_bcm43xx.c
+@@ -366,11 +366,8 @@ int bcm43xx_init(int fd, int def_speed, int speed, struct termios *ti,
+ 		return -1;
+ 
+ 	if (bcm43xx_locate_patch(FIRMWARE_DIR, chip_name, fw_path)) {
+-		fprintf(stderr, "Patch not found, continue anyway\n");
++		fprintf(stderr, "Patch not found for %s, continue anyway\n", chip_name);
+ 	} else {
+-		if (bcm43xx_set_speed(fd, ti, speed))
+-			return -1;
+-
+ 		if (bcm43xx_load_firmware(fd, fw_path))
+ 			return -1;
+ 
+@@ -380,6 +377,7 @@ int bcm43xx_init(int fd, int def_speed, int speed, struct termios *ti,
+ 			return -1;
+ 		}
+ 
++		sleep(1);
+ 		if (bcm43xx_reset(fd))
+ 			return -1;
+ 	}
+-- 
+1.9.1
+

recipes-connectivity/bluez5/bluez5/0003-Increase-firmware-load-timeout-to-30s.patch

@@ -0,0 +1,25 @@
+From d41dc2046dd08d8c95197f677e224506f5b39bdd Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Wed, 20 Jan 2016 16:00:37 +0000
+Subject: [PATCH 3/4] Increase firmware load timeout to 30s
+
+---
+ tools/hciattach.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/hciattach.c b/tools/hciattach.c
+index 5861d33..4141796 100644
+--- a/tools/hciattach.c
++++ b/tools/hciattach.c
+@@ -1293,7 +1293,7 @@ int main(int argc, char *argv[])
+ {
+ 	struct uart_t *u = NULL;
+ 	int detach, printpid, raw, opt, i, n, ld, err;
+-	int to = 10;
++	int to = 30;
+ 	int init_speed = 0;
+ 	int send_break = 0;
+ 	pid_t pid;
+-- 
+1.9.1
+

recipes-connectivity/bluez5/bluez5/0004-Move-the-43xx-firmware-into-lib-firmware.patch

@@ -0,0 +1,25 @@
+From 76681284b0ea49852041fdb97a35175089a08781 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 23 Feb 2016 17:52:29 +0000
+Subject: [PATCH 4/4] Move the 43xx firmware into /lib/firmware
+
+---
+ tools/hciattach_bcm43xx.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/hciattach_bcm43xx.c b/tools/hciattach_bcm43xx.c
+index 0b792e0..207f668 100644
+--- a/tools/hciattach_bcm43xx.c
++++ b/tools/hciattach_bcm43xx.c
+@@ -43,7 +43,7 @@
+ #include "hciattach.h"
+ 
+ #ifndef FIRMWARE_DIR
+-#define FIRMWARE_DIR "/etc/firmware"
++#define FIRMWARE_DIR "/lib/firmware"
+ #endif
+ 
+ #define FW_EXT ".hcd"
+-- 
+1.9.1
+

recipes-connectivity/bluez5/bluez5/brcm43438.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Broadcom BCM43438 bluetooth HCI
+ConditionPathIsDirectory=/proc/device-tree/soc/gpio@7e200000/bt_pins
+Before=bluetooth.service
+After=dev-ttyAMA0.device
+
+[Service]
+Type=simple
+ExecStart=/usr/bin/hciattach -n /dev/ttyAMA0 bcm43xx 921600 noflow -
+
+[Install]
+WantedBy=multi-user.target

recipes-connectivity/bluez5/bluez5_%.bbappend

@@ -0,0 +1,26 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+SRC_URI_append_raspberrypi3 = " \
+    file://BCM43430A1.hcd \
+    file://0001-bcm43xx-Add-bcm43xx-3wire-variant.patch \
+    file://0002-bcm43xx-The-UART-speed-must-be-reset-after-the-firmw.patch \
+    file://0003-Increase-firmware-load-timeout-to-30s.patch \
+    file://0004-Move-the-43xx-firmware-into-lib-firmware.patch \
+    file://brcm43438.service \
+    "
+
+do_install_append_raspberrypi3() {
+    install -d ${D}/lib/firmware/brcm/
+    install -m 0644 ${WORKDIR}/BCM43430A1.hcd ${D}/lib/firmware/brcm/BCM43430A1.hcd
+
+    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
+        install -d ${D}${systemd_unitdir}/system
+        install -m 0644 ${WORKDIR}/brcm43438.service ${D}${systemd_unitdir}/system
+    fi
+}
+
+FILES_${PN}_append_raspberrypi3 = " \
+    /lib/firmware/brcm/BCM43430A1.hcd \
+    "
+
+SYSTEMD_SERVICE_${PN}_raspberrypi3 += "brcm43438.service"

recipes-core/base-files/base-files/raspberrypi/fstab

@@ -1,9 +0,0 @@
-# stock fstab for the RaspberryPi - you may want to tweak this to suit.
-
-rootfs               /                    auto       defaults,noatime      1  1
-proc                 /proc                proc       defaults              0  0
-devpts               /dev/pts             devpts     mode=0620,gid=5       0  0
-usbfs                /proc/bus/usb        usbfs      defaults              0  0
-tmpfs                /var/volatile        tmpfs      defaults              0  0
-tmpfs                /dev/shm             tmpfs      mode=0777             0  0
-tmpfs                /media/ram           tmpfs      defaults              0  0

recipes-core/base-files/base-files/raspberrypi/profile

@@ -1,33 +0,0 @@
-# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
-# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
-
-PATH="/usr/local/bin:/usr/bin:/bin"
-EDITOR="/bin/vi"			# needed for packages like cron
-test -z "$TERM" && TERM="vt100"	# Basic terminal capab. For screen etc.
-
-if [ ! -e /etc/localtime -a ! -e /etc/TZ ]; then
-	TZ="UTC"		# Time Zone. Look at http://theory.uwinnipeg.ca/gnu/glibc/libc_303.html 
-				# for an explanation of how to set this to your local timezone.
-	export TZ
-fi
-
-if [ "`id -u`" -eq 0 ]; then
-   PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin:
-fi
-if [ "$PS1" ]; then
-# works for bash and ash (no other shells known to be in use here)
-   PS1='\u@\h:\w\$ '
-fi
-
-if [ -d /etc/profile.d ]; then
-  for i in /etc/profile.d/*.sh; do
-    if [ -r $i ]; then
-      . $i
-    fi
-  done
-  unset i
-fi
-
-export PATH PS1 OPIEDIR QPEDIR QTDIR EDITOR TERM
-
-umask 022

recipes-core/base-files/base-files_3.0.14.bbappend

@@ -1,3 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-# Don't forget to bump PRINC if you update the extra files.
-PRINC = "1"

recipes-core/images/rpi-basic-image.bb

@@ -1,4 +1,6 @@
 # Base this image on rpi-hwup-image
 include rpi-hwup-image.bb
 
+SPLASH = "psplash-raspberrypi"
+
 IMAGE_FEATURES += "ssh-server-dropbear splash"

recipes-core/images/rpi-test-image.bb

@@ -0,0 +1,4 @@
+# Base this image on rpi-basic-image
+include rpi-basic-image.bb
+
+IMAGE_INSTALL_append = " packagegroup-rpi-test"

recipes-core/packagegroups/packagegroup-rpi-test.bb

@@ -0,0 +1,27 @@
+DESCRIPTION = "RaspberryPi Test Packagegroup"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+
+inherit packagegroup
+
+RDEPENDS_${PN} = "\
+    omxplayer \
+    bcm2835-tests \
+    wiringpi \
+    rpio \
+    rpi-gpio \
+    pi-blaster \
+    python-rtimu \
+    python-sense-hat \
+    connman \
+    connman-client \
+    crda \
+    bluez5 \
+"
+
+RRECOMMENDS_${PN} = "\
+    bigbuckbunny-1080p \
+    bigbuckbunny-480p \
+    bigbuckbunny-720p \
+    ${MACHINE_EXTRA_RRECOMMENDS} \
+"

recipes-core/psplash/psplash_git.bbappend

@@ -1,2 +1,2 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
-SPLASH_IMAGES = "file://psplash-raspberrypi-img.h;outsuffix=default"
+SPLASH_IMAGES += "file://psplash-raspberrypi-img.h;outsuffix=raspberrypi"

recipes-devtools/bcm2835/bcm2835_1.50.bb

@@ -8,35 +8,33 @@ AUTHOR = "Mike McCauley (mikem@open.com.au)"
 LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
 
-PR = "r0"
-
 COMPATIBLE_MACHINE = "raspberrypi"
 
-SRC_URI = "http://www.open.com.au/mikem/bcm2835/bcm2835-1.8.tar.gz"
+SRC_URI = "http://www.airspayce.com/mikem/bcm2835/bcm2835-${PV}.tar.gz"
 
-SRC_URI[md5sum] = "cca8500049d4ebf9087de4bd1601d185"
-SRC_URI[sha256sum] = "64be77b10aaf48ecb2a9022e13057f3b564093916875c0fc56373b4142dd5cae"
+SRC_URI[md5sum] = "258caf3437012d09a651e1852d0bd60c"
+SRC_URI[sha256sum] = "52180b8a61b6546c1df4aed259d0a4d2fa56e50605e0d4d967a76bf2b23dafb8"
+
+inherit autotools
+
+do_compile_append() {
+    # Now compiling the examples provided by the package
+    mkdir -p ${B}/examples
+    for file in `ls ${S}/examples`; do
+        ${CC} ${LDFLAGS} ${S}/examples/${file}/${file}.c -o ${B}/examples/${file} -Bstatic -L${B}/src -lbcm2835 -I${S}/src
+    done
+}
+
+do_install_append() {
+    install -d ${D}/${libdir}/${BPN}
+    for file in ${B}/examples/*
+    do
+        install -m 0755 ${file} ${D}/${libdir}/${BPN}
+    done
+}
 
 PACKAGES += "${PN}-tests"
 
 FILES_${PN} = ""
 FILES_${PN}-tests = "${libdir}/${BPN}"
 FILES_${PN}-dbg += "${libdir}/${BPN}/.debug"
-
-inherit autotools
-
-do_compile_append() {
-    #Now compiling the examples provided by the package
-    for file in examples/*
-    do
-        ${CC} ${file}/${file##*/}.c -o ${file}/${file##*/} -Bstatic -L${S}/src -lbcm2835 -I${S}/src
-    done
-}
-
-do_install_append() {
-    install -d ${D}/${libdir}/${BPN}
-    for file in examples/*
-    do
-        install -m 0755 ${file}/${file##*/} ${D}/${libdir}/${BPN}
-    done
-}

recipes-devtools/pi-blaster/files/remove-initscript-lsb-dependency.patch

@@ -0,0 +1,77 @@
+Remove dependencies on LSB functions
+
+Upstream-Status: Inappropriate [configuration]
+
+Signed-off-by: Alex Lennon <ajlennon@dynamicdevices.co.uk>
+
+diff -ur git.org/pi-blaster.boot.sh git/pi-blaster.boot.sh
+--- git.org/pi-blaster.boot.sh	2014-05-20 14:49:44.378582168 +0100
++++ git/pi-blaster.boot.sh	2014-05-20 14:51:08.330582386 +0100
+@@ -28,12 +28,12 @@
+ [ -r /etc/default/$NAME ] && . /etc/default/$NAME
+ 
+ # Load the VERBOSE setting and other rcS variables
+-. /lib/init/vars.sh
++#. /lib/init/vars.sh
+ 
+ # Define LSB log_* functions.
+ # Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+ # and status_of_proc is working.
+-. /lib/lsb/init-functions
++#. /lib/lsb/init-functions
+ 
+ #
+ # Function that starts the daemon/service
+@@ -77,48 +77,23 @@
+ 
+ case "$1" in
+   start)
+-	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
++	[ "$VERBOSE" != no ] && echo "Starting $DESC" "$NAME"
+ 	do_start
+-	case "$?" in
+-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+-	esac
+ 	;;
+   stop)
+-	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
++	[ "$VERBOSE" != no ] && echo "Stopping $DESC" "$NAME"
+ 	do_stop
+-	case "$?" in
+-		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+-		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+-	esac
+-	;;
+-  status)
+-	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+ 	;;
+   restart|force-reload)
+ 	#
+ 	# If the "reload" option is implemented then remove the
+ 	# 'force-reload' alias
+ 	#
+-	log_daemon_msg "Restarting $DESC" "$NAME"
+ 	do_stop
+-	case "$?" in
+-	  0|1)
+-		do_start
+-		case "$?" in
+-			0) log_end_msg 0 ;;
+-			1) log_end_msg 1 ;; # Old process is still running
+-			*) log_end_msg 1 ;; # Failed to start
+-		esac
+-		;;
+-	  *)
+-		# Failed to stop
+-		log_end_msg 1
+-		;;
+-	esac
++	do_start
+ 	;;
+   *)
+-	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
++	echo "Usage: $SCRIPTNAME {start|stop|restart}" >&2
+ 	exit 3
+ 	;;
+ esac

recipes-devtools/pi-blaster/pi-blaster.inc

@@ -0,0 +1,21 @@
+DESCRIPTION = "This project enables PWM on the GPIO pins you request of a Raspberry Pi."
+HOMEPAGE = "https://github.com/sarfata/pi-blaster/"
+SECTION = "devel/libs"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://README.md;beginline=157;endline=170;md5=f20832f31126609af5a7bf2340014540"
+
+SRC_URI = "git://github.com/sarfata/pi-blaster \
+           file://remove-initscript-lsb-dependency.patch \
+"
+
+S = "${WORKDIR}/git"
+
+inherit update-rc.d autotools
+
+INITSCRIPT_PACKAGES = "${PN}"
+INITSCRIPT_NAME_${PN} = "${PN}.boot.sh"
+INITSCRIPT_PARAMS_${PN} = "defaults 15 85"
+
+COMPATIBLE_MACHINE = "raspberrypi"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"

recipes-devtools/pi-blaster/pi-blaster_git.bb

@@ -0,0 +1,3 @@
+require pi-blaster.inc
+
+SRCREV = "ec5e1b4c6191d8f9a538497dbbb86f9cf0de7016"

recipes-devtools/python/RPi-GPIO/don-t-install-setuptools.patch

@@ -1,16 +0,0 @@
-We already have setuptools python module so we will use that and not the
-one provided in this package.
-
-Upstream-Status: Inappropriate [embedded specific]
-Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
-
-Index: RPi.GPIO-0.2.0/setup.py
-===================================================================
---- RPi.GPIO-0.2.0.orig/setup.py	2012-05-24 13:17:31.000000000 +0300
-+++ RPi.GPIO-0.2.0/setup.py	2012-08-22 00:56:59.049001018 +0300
-@@ -1,6 +1,4 @@
- #!/usr/bin/env python
--import distribute_setup
--distribute_setup.use_setuptools()
- from setuptools import setup, find_packages
- import platform

recipes-devtools/python/python-rtimu/0001-include-asm-ioctl.h-for-ioctl-define.patch

@@ -0,0 +1,33 @@
+From c3aa4af56652b403e304ea5f321acfe289e42922 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sat, 30 Jan 2016 16:07:14 -0800
+Subject: [PATCH] include asm/ioctl.h for ioctl() define
+
+also fixes errors e.g.
+
+../../RTIMULib/RTIMUHal.cpp:208:29: error: '_IOC_SIZEBITS' was not
+declared in this scope
+         return ioctl(m_SPI, SPI_IOC_MESSAGE(1), &wrIOC);
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+Upstream-Status: Submitted
+
+ RTIMULib/RTIMUHal.cpp | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/RTIMULib/RTIMUHal.cpp b/RTIMULib/RTIMUHal.cpp
+index f9c3d15..d968326 100644
+--- a/RTIMULib/RTIMUHal.cpp
++++ b/RTIMULib/RTIMUHal.cpp
+@@ -29,6 +29,7 @@
+ #if !defined(WIN32) && !defined(__APPLE__)
+ 
+ #include <linux/spi/spidev.h>
++#include <asm/ioctl.h>
+ 
+ RTIMUHal::RTIMUHal()
+ {
+-- 
+2.7.0
+

recipes-devtools/python/python-rtimu_git.bb

@@ -0,0 +1,15 @@
+DESCRIPTION = "RTIMULib is a C++ and Python library that makes it easy to use 9-dof and \
+10-dof IMUs with embedded Linux systems"
+HOMEPAGE = "https://github.com/RPi-Distro/RTIMULib/"
+SECTION = "devel/python"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://../../LICENSE;md5=96cdecb41125f498958e09b72faf318e"
+
+SRC_URI = "git://github.com/RPi-Distro/RTIMULib.git;protocol=http;branch=master \
+           file://0001-include-asm-ioctl.h-for-ioctl-define.patch;patchdir=../.. \
+          "
+SRCREV = "b949681af69b45f0f7f4bb53b6770037b5b02178"
+
+S = "${WORKDIR}/git/Linux/python/"
+
+inherit setuptools

recipes-devtools/python/python-sense-hat_2.1.0.bb

@@ -0,0 +1,28 @@
+SUMMARY = "Python module to control the Raspberry Pi Sense HAT used in the Astro Pi mission"
+HOMEPAGE = "https://github.com/RPi-Distro/python-sense-hat"
+SECTION = "devel/python"
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://LICENCE.txt;md5=d80fe312e1ff5fbd97369b093bf21cda"
+
+SRCNAME = "sense-hat"
+
+SRC_URI = "https://pypi.python.org/packages/source/s/${SRCNAME}/${SRCNAME}-${PV}.tar.gz"
+
+SRC_URI[md5sum] = "71217f15ea963040f06e2f50722186ca"
+SRC_URI[sha256sum] = "c6c76707c0ea514e4b0f1f96f1b5b79755875891aae037df7434b6aad7b9dbca"
+
+S = "${WORKDIR}/${SRCNAME}-${PV}"
+
+inherit setuptools
+
+DEPENDS += " \
+    jpeg \
+    zlib \
+    freetype \
+    "
+
+RDEPENDS_${PN} += " \
+    python-numpy \
+    python-rtimu \
+    python-imaging \
+    "

recipes-devtools/python/rpi-gpio/0001-Remove-nested-functions.patch

@@ -0,0 +1,294 @@
+From 23d7ab77865f8b17042f5cd4c6720cca475e0eb5 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Wed, 13 Jan 2016 14:27:10 -0800
+Subject: [PATCH] Remove nested functions
+
+nested functions are not supported on llvm/clang compiler, replacing
+them helps make code portable and be compilable with non-gcc compilers
+additionally fix the diagnostic messages clang reported
+
+source/c_gpio.c:130:18: warning: comparison of distinct pointer types
+('volatile uint32_t *' (aka 'volatile unsigned int *') an
+d 'void *') [-Wcompare-distinct-pointer-types]
+    if (gpio_map < MAP_FAILED)
+        ~~~~~~~~ ^ ~~~~~~~~~~
+
+        source/c_gpio.c:89:13: warning: variable 'peri_base' is used
+uninitialized whenever 'if' condition is false [-Wsometimes-uninit
+ialized]
+        if (fread(buf, 1, sizeof buf, fp) == sizeof buf) {
+            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+source/c_gpio.c:116:17: note: uninitialized use occurs here
+    gpio_base = peri_base + GPIO_BASE_OFFSET;
+                ^~~~~~~~~
+source/c_gpio.c:89:9: note: remove the 'if' if its condition is always
+true
+        if (fread(buf, 1, sizeof buf, fp) == sizeof buf) {
+        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+source/c_gpio.c:64:23: note: initialize the variable 'peri_base' to
+silence this warning
+    uint32_t peri_base;
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+Upstream-Status: Submitted
+
+ source/c_gpio.c  |   6 +--
+ source/py_gpio.c | 135 ++++++++++++++++++++++++++++---------------------------
+ 2 files changed, 71 insertions(+), 70 deletions(-)
+
+diff --git a/source/c_gpio.c b/source/c_gpio.c
+index c96a2b0..b69880f 100644
+--- a/source/c_gpio.c
++++ b/source/c_gpio.c
+@@ -61,7 +61,7 @@ int setup(void)
+ {
+     int mem_fd;
+     uint8_t *gpio_mem;
+-    uint32_t peri_base;
++    uint32_t peri_base = 0;
+     uint32_t gpio_base;
+     unsigned char buf[4];
+     FILE *fp;
+@@ -73,7 +73,7 @@ int setup(void)
+     if ((mem_fd = open("/dev/gpiomem", O_RDWR|O_SYNC)) > 0)
+     {
+         gpio_map = (uint32_t *)mmap(NULL, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, mem_fd, 0);
+-        if ((uint32_t)gpio_map < 0) {
++        if (gpio_map == MAP_FAILED) {
+             return SETUP_MMAP_FAIL;
+         } else {
+             return SETUP_OK;
+@@ -127,7 +127,7 @@ int setup(void)
+ 
+     gpio_map = (uint32_t *)mmap( (void *)gpio_mem, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_FIXED, mem_fd, gpio_base);
+ 
+-    if ((uint32_t)gpio_map < 0)
++    if (gpio_map == MAP_FAILED)
+         return SETUP_MMAP_FAIL;
+ 
+     return SETUP_OK;
+diff --git a/source/py_gpio.c b/source/py_gpio.c
+index d54cc7f..007bad5 100644
+--- a/source/py_gpio.c
++++ b/source/py_gpio.c
+@@ -69,6 +69,20 @@ static int mmap_gpio_mem(void)
+       return 0;
+    }
+ }
++static inline int cleanup_one(unsigned int gpio)
++{
++   // clean up any /sys/class exports
++   event_cleanup(gpio);
++
++   // set everything back to input
++   if (gpio_direction[gpio] != -1) {
++      setup_gpio(gpio, INPUT, PUD_OFF);
++      gpio_direction[gpio] = -1;
++      return 1;
++   }
++   return 0;
++}
++
+ 
+ // python function cleanup(channel=None)
+ static PyObject *py_cleanup(PyObject *self, PyObject *args, PyObject *kwargs)
+@@ -83,19 +97,6 @@ static PyObject *py_cleanup(PyObject *self, PyObject *args, PyObject *kwargs)
+    PyObject *tempobj;
+    static char *kwlist[] = {"channel", NULL};
+ 
+-   void cleanup_one(void)
+-   {
+-      // clean up any /sys/class exports
+-      event_cleanup(gpio);
+-
+-      // set everything back to input
+-      if (gpio_direction[gpio] != -1) {
+-         setup_gpio(gpio, INPUT, PUD_OFF);
+-         gpio_direction[gpio] = -1;
+-         found = 1;
+-      }
+-   }
+-
+    if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|O", kwlist, &chanlist))
+       return NULL;
+ 
+@@ -140,7 +141,7 @@ static PyObject *py_cleanup(PyObject *self, PyObject *args, PyObject *kwargs)
+       } else if (channel != -666) {    // channel was an int indicating single channel
+          if (get_gpio_number(channel, &gpio))
+             return NULL;
+-         cleanup_one();
++         found = cleanup_one(gpio);
+       } else {  // channel was a list/tuple
+          for (i=0; i<chancount; i++) {
+             if (chanlist) {
+@@ -169,7 +170,7 @@ static PyObject *py_cleanup(PyObject *self, PyObject *args, PyObject *kwargs)
+ 
+             if (get_gpio_number(channel, &gpio))
+                return NULL;
+-            cleanup_one();
++            found = cleanup_one(gpio);
+          }
+       }
+    }
+@@ -182,6 +183,37 @@ static PyObject *py_cleanup(PyObject *self, PyObject *args, PyObject *kwargs)
+    Py_RETURN_NONE;
+ }
+ 
++static inline int setup_one(unsigned int *gpio, int channel, int pud, int direction, int initial) {
++   if (get_gpio_number(channel, gpio))
++      return 0;
++
++   int func = gpio_function(*gpio);
++   if (gpio_warnings &&                             // warnings enabled and
++       ((func != 0 && func != 1) ||                 // (already one of the alt functions or
++       (gpio_direction[*gpio] == -1 && func == 1)))  // already an output not set from this program)
++   {
++      PyErr_WarnEx(NULL, "This channel is already in use, continuing anyway.  Use GPIO.setwarnings(False) to disable warnings.", 1);
++   }
++
++   // warn about pull/up down on i2c channels
++   if (gpio_warnings) {
++      if (rpiinfo.p1_revision == 0) { // compute module - do nothing
++      } else if ((rpiinfo.p1_revision == 1 && (*gpio == 0 || *gpio == 1)) ||
++                 (*gpio == 2 || *gpio == 3)) {
++         if (pud == PUD_UP || pud == PUD_DOWN)
++            PyErr_WarnEx(NULL, "A physical pull up resistor is fitted on this channel!", 1);
++      }
++   }
++
++   if (direction == OUTPUT && (initial == LOW || initial == HIGH)) {
++      output_gpio(*gpio, initial);
++   }
++   setup_gpio(*gpio, direction, pud);
++   gpio_direction[*gpio] = direction;
++   return 1;
++}
++
++
+ // python function setup(channel(s), direction, pull_up_down=PUD_OFF, initial=None)
+ static PyObject *py_setup_channel(PyObject *self, PyObject *args, PyObject *kwargs)
+ {
+@@ -195,37 +227,6 @@ static PyObject *py_setup_channel(PyObject *self, PyObject *args, PyObject *kwar
+    int pud = PUD_OFF + PY_PUD_CONST_OFFSET;
+    int initial = -1;
+    static char *kwlist[] = {"channel", "direction", "pull_up_down", "initial", NULL};
+-   int func;
+-
+-   int setup_one(void) {
+-      if (get_gpio_number(channel, &gpio))
+-         return 0;
+-
+-      func = gpio_function(gpio);
+-      if (gpio_warnings &&                             // warnings enabled and
+-          ((func != 0 && func != 1) ||                 // (already one of the alt functions or
+-          (gpio_direction[gpio] == -1 && func == 1)))  // already an output not set from this program)
+-      {
+-         PyErr_WarnEx(NULL, "This channel is already in use, continuing anyway.  Use GPIO.setwarnings(False) to disable warnings.", 1);
+-      }
+-
+-      // warn about pull/up down on i2c channels
+-      if (gpio_warnings) {
+-         if (rpiinfo.p1_revision == 0) { // compute module - do nothing
+-         } else if ((rpiinfo.p1_revision == 1 && (gpio == 0 || gpio == 1)) ||
+-                    (gpio == 2 || gpio == 3)) {
+-            if (pud == PUD_UP || pud == PUD_DOWN)
+-               PyErr_WarnEx(NULL, "A physical pull up resistor is fitted on this channel!", 1);
+-         }
+-      }
+-
+-      if (direction == OUTPUT && (initial == LOW || initial == HIGH)) {
+-         output_gpio(gpio, initial);
+-      }
+-      setup_gpio(gpio, direction, pud);
+-      gpio_direction[gpio] = direction;
+-      return 1;
+-   }
+ 
+    if (!PyArg_ParseTupleAndKeywords(args, kwargs, "Oi|ii", kwlist, &chanlist, &direction, &pud, &initial))
+       return NULL;
+@@ -290,7 +291,7 @@ static PyObject *py_setup_channel(PyObject *self, PyObject *args, PyObject *kwar
+    } else if (chantuple) {
+        chancount = PyTuple_Size(chantuple);
+    } else {
+-       if (!setup_one())
++       if (!setup_one(&gpio, channel, pud, direction, initial))
+           return NULL;
+        Py_RETURN_NONE;
+    }
+@@ -320,12 +321,29 @@ static PyObject *py_setup_channel(PyObject *self, PyObject *args, PyObject *kwar
+           return NULL;
+       }
+ 
+-      if (!setup_one())
++      if (!setup_one(&gpio, channel, pud, direction, initial))
+          return NULL;
+    }
+ 
+    Py_RETURN_NONE;
+ }
++static inline int output_val(unsigned int *gpio, int channel, int value) {
++   if (get_gpio_number(channel, gpio))
++       return 0;
++
++   if (gpio_direction[*gpio] != OUTPUT)
++   {
++      PyErr_SetString(PyExc_RuntimeError, "The GPIO channel has not been set up as an OUTPUT");
++      return 0;
++   }
++
++   if (check_gpio_priv())
++      return 0;
++
++   output_gpio(*gpio, value);
++   return 1;
++}
++
+ 
+ // python function output(channel(s), value(s))
+ static PyObject *py_output_gpio(PyObject *self, PyObject *args)
+@@ -342,23 +360,6 @@ static PyObject *py_output_gpio(PyObject *self, PyObject *args)
+    int chancount = -1;
+    int valuecount = -1;
+ 
+-   int output(void) {
+-      if (get_gpio_number(channel, &gpio))
+-          return 0;
+-
+-      if (gpio_direction[gpio] != OUTPUT)
+-      {
+-         PyErr_SetString(PyExc_RuntimeError, "The GPIO channel has not been set up as an OUTPUT");
+-         return 0;
+-      }
+-
+-      if (check_gpio_priv())
+-         return 0;
+-
+-      output_gpio(gpio, value);
+-      return 1;
+-   }
+-
+    if (!PyArg_ParseTuple(args, "OO", &chanlist, &valuelist))
+        return NULL;
+ 
+@@ -416,7 +417,7 @@ static PyObject *py_output_gpio(PyObject *self, PyObject *args)
+    }
+ 
+    if (chancount == -1) {
+-      if (!output())
++      if (!output_val(&gpio, channel, value))
+          return NULL;
+       Py_RETURN_NONE;
+    }
+@@ -472,7 +473,7 @@ static PyObject *py_output_gpio(PyObject *self, PyObject *args)
+               return NULL;
+           }
+       }
+-      if (!output())
++      if (!output_val(&gpio, channel, value))
+          return NULL;
+    }
+ 
+-- 
+2.7.0
+

recipes-devtools/python/rpi-gpio_0.6.1.bb

@@ -2,20 +2,20 @@ DESCRIPTION = "A module to control Raspberry Pi GPIO channels"
 HOMEPAGE = "http://code.google.com/p/raspberry-gpio-python/"
 SECTION = "devel/python"
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://LICENCE.txt;md5=ee5754ae9d5f8061d6d4ccd9c9fe0061"
+LIC_FILES_CHKSUM = "file://LICENCE.txt;md5=9b95630a648966b142f1a0dcea001cb7"
 
 SRCNAME = "RPi.GPIO"
-PR = "r0"
 
 SRC_URI = "\
           http://pypi.python.org/packages/source/R/RPi.GPIO/${SRCNAME}-${PV}.tar.gz \
-          file://don-t-install-setuptools.patch \
+          file://0001-Remove-nested-functions.patch \
           "
+SRC_URI[md5sum] = "254d0443a436eb241367c487274e7197"
+SRC_URI[sha256sum] = "54e5fb06d9ea1a1389a497fb5a06dfa950c86303b0f4ba89b68c55999d1df064"
+
 S = "${WORKDIR}/${SRCNAME}-${PV}"
 
-inherit setuptools
+inherit distutils
 
 COMPATIBLE_MACHINE = "raspberrypi"
 
-SRC_URI[md5sum] = "0fc4bfa6aabc856b0b75252a40ac75cc"
-SRC_URI[sha256sum] = "fcfd97dc9687dde76b13b9d12c122e71b13e2ba09a62913d7b8d9ddbb3e8cabf"

recipes-devtools/python/rpio/0001-include-sys-types.h-explicitly-for-getting-caddr_t-d.patch

@@ -0,0 +1,30 @@
+From c86bfacc98d58244f532626954ed00d84ecfa82d Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sat, 30 Jan 2016 17:12:37 -0800
+Subject: [PATCH] include sys/types.h explicitly for getting caddr_t definition
+
+Helps fixing build on musl where sys/types.h is not included indirectly
+as happening on glibc
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+Upstream-Status: Submitted
+
+ source/c_gpio/c_gpio.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/source/c_gpio/c_gpio.c b/source/c_gpio/c_gpio.c
+index 25a04ca..70df632 100644
+--- a/source/c_gpio/c_gpio.c
++++ b/source/c_gpio/c_gpio.c
+@@ -29,6 +29,7 @@
+ #include <stdint.h>
+ #include <stdlib.h>
+ #include <fcntl.h>
++#include <sys/types.h>
+ #include <sys/mman.h>
+ #include "c_gpio.h"
+ 
+-- 
+2.7.0
+

recipes-devtools/python/rpio_0.10.0.bb

@@ -0,0 +1,20 @@
+DESCRIPTION = "Advanced GPIO for the Raspberry Pi. Extends RPi.GPIO with PWM, \
+GPIO interrups, TCP socket interrupts, command line tools and more"
+HOMEPAGE = "https://github.com/metachris/RPIO"
+SECTION = "devel/python"
+LICENSE = "LGPLv3+"
+LIC_FILES_CHKSUM = "file://README.rst;beginline=41;endline=53;md5=d5d95d7486a4d98c999675c23196b25a"
+
+SRCNAME = "RPIO"
+
+SRC_URI = "http://pypi.python.org/packages/source/R/RPIO/${SRCNAME}-${PV}.tar.gz \
+           file://0001-include-sys-types.h-explicitly-for-getting-caddr_t-d.patch \
+           "
+S = "${WORKDIR}/${SRCNAME}-${PV}"
+
+inherit setuptools
+
+COMPATIBLE_MACHINE = "raspberrypi"
+
+SRC_URI[md5sum] = "cefc45422833dcafcd59b78dffc540f4"
+SRC_URI[sha256sum] = "b89f75dec9de354681209ebfaedfe22b7c178aacd91a604a7bd6d92024e4cf7e"

recipes-devtools/wiringPi/files/0001-Add-initial-cross-compile-support.patch

@@ -0,0 +1,410 @@
+From 6d85e6cc3ab97c3f060e5e0a8e3f1945a14c86ba Mon Sep 17 00:00:00 2001
+From: Gianfranco Costamagna <gianfranco.costamagna@abinsula.com>
+Date: Mon, 12 Oct 2015 12:15:51 +0200
+Subject: [PATCH] Add initial cross compile support (rebase from Petter Mabäcker <petter@technux.se> version)
+
+---
+ devLib/Makefile             |   54 ++++++++++++++++++++++++-------------------
+ examples/Gertboard/Makefile |   22 +++++++++++-------
+ examples/Makefile           |   22 +++++++++++-------
+ examples/PiFace/Makefile    |   22 +++++++++++-------
+ examples/PiGlow/Makefile    |    4 ++--
+ examples/q2w/Makefile       |    4 ++--
+ gpio/Makefile               |   29 ++++++++++++-----------
+ wiringPi/Makefile           |   50 +++++++++++++++++++++------------------
+ 8 files changed, 119 insertions(+), 88 deletions(-)
+
+diff --git a/devLib/Makefile b/devLib/Makefile
+index 0fb0033..cbea759 100644
+--- a/devLib/Makefile
++++ b/devLib/Makefile
+@@ -31,15 +31,19 @@ ifneq ($V,1)
+ Q ?= @
+ endif
+ 
+-STATIC=libwiringPiDev.a
+-DYNAMIC=libwiringPiDev.so.$(VERSION)
++INCLUDE_DIR?=$(DESTDIR)$(PREFIX)/include
++LIB_DIR?=$(DESTDIR)$(PREFIX)/lib
+ 
+-#DEBUG	= -g -O0
+-DEBUG	= -O2
+-CC	= gcc
+-INCLUDE	= -I.
+-DEFS	= -D_GNU_SOURCE
+-CFLAGS	= $(DEBUG) $(DEFS) -Wformat=2 -Wall -Winline $(INCLUDE) -pipe -fPIC
++BASE_NAME=libwiringPiDev
++STATIC=$(BASE_NAME).a
++DYNAMIC=$(BASE_NAME).so.$(VERSION)
++
++#DEBUG ?= -g -O0
++DEBUG	?= -O2
++CC	?= gcc
++INCLUDE	?= -I.
++DEFS	?= -D_GNU_SOURCE
++CFLAGS	?= $(DEBUG) $(DEFS) -Wformat=2 -Wall -Winline $(INCLUDE) -pipe -fPIC
+ 
+ LIBS    =
+ 
+@@ -66,16 +70,16 @@ $(STATIC):	$(OBJ)
+ 
+ $(DYNAMIC):	$(OBJ)
+ 	$Q echo "[Link (Dynamic)]"
+-	$Q $(CC) -shared -Wl,-soname,libwiringPiDev.so$(WIRINGPI_SONAME_SUFFIX) -o libwiringPiDev.so.$(VERSION) -lpthread $(OBJ)
++	$Q $(CC) -shared $(LDFLAGS) -Wl,-soname,$(BASE_NAME).so.$(DYN_VERS_MAJ) -o $(BASE_NAME).so -lpthread $(OBJ)
+ 
+ .c.o:
+ 	$Q echo [Compile] $<
+-	$Q $(CC) -c $(CFLAGS) $< -o $@
++	$Q $(CC) -c $(CFLAGS) -fPIC $< -o $@
+ 
+ .PHONY:	clean
+ clean:
+ 	$Q echo "[Clean]"
+-	$Q rm -f $(OBJ) $(OBJ_I2C) *~ core tags Makefile.bak libwiringPiDev.*
++	$Q rm -f $(OBJ) $(OBJ_I2C) *~ core tags Makefile.bak $(BASE_NAME).so* $(BASE_NAME).a
+ 
+ .PHONY:	tags
+ tags:	$(SRC)
+@@ -86,22 +90,22 @@ tags:	$(SRC)
+ .PHONY:	install
+ install:	$(DYNAMIC)
+ 	$Q echo "[Install Headers]"
+-	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/include
+-	$Q install -m 0644 $(HEADERS)					$(DESTDIR)$(PREFIX)/include
++	$Q install -m 0755 -d						$(INCLUDE_DIR)
++	$Q install -m 0644 $(HEADERS)					$(INCLUDE_DIR)
+ 	$Q echo "[Install Dynamic Lib]"
+-	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/lib
+-	$Q install -m 0755 libwiringPiDev.so.$(VERSION)			$(DESTDIR)$(PREFIX)/lib/libwiringPiDev.so.$(VERSION)
+-	$Q ln -sf $(DESTDIR)$(PREFIX)/lib/libwiringPiDev.so.$(VERSION)	$(DESTDIR)/lib/libwiringPiDev.so
+-	$Q $(LDCONFIG)
++	$Q install -m 0755 -d						$(LIB_DIR)
++	$Q install -m 0755 $(BASE_NAME).so				$(LIB_DIR)/$(DYNAMIC)
++	$Q ln -sf $(DYNAMIC)						$(LIB_DIR)/$(BASE_NAME).so
++	$Q ln -sf $(DYNAMIC)						$(LIB_DIR)/$(BASE_NAME).so.$(DYN_VERS_MAJ)
+ 
+ .PHONY:	install-static
+ install-static:	$(STATIC)
+ 	$Q echo "[Install Headers]"
+-	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/include
+-	$Q install -m 0644 $(HEADERS)					$(DESTDIR)$(PREFIX)/include
++	$Q install -m 0755 -d						$(INCLUDE_DIR)
++	$Q install -m 0644 $(HEADERS)					$(INCLUDE_DIR)
+ 	$Q echo "[Install Static Lib]"
+-	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/lib
+-	$Q install -m 0755 libwiringPiDev.a				$(DESTDIR)$(PREFIX)/lib
++	$Q install -m 0755 -d						$(LIB_DIR)
++	$Q install -m 0755 $(STATIC)					$(LIB_DIR)
+ 
+ .PHONY:	install-deb
+ install-deb:	$(DYNAMIC)
+@@ -116,9 +120,11 @@ install-deb:	$(DYNAMIC)
+ .PHONY:	uninstall
+ uninstall:
+ 	$Q echo "[UnInstall]"
+-	$Q cd $(DESTDIR)$(PREFIX)/include/ && rm -f $(HEADERS)
+-	$Q cd $(DESTDIR)$(PREFIX)/lib/     && rm -f libwiringPiDev.*
+-	$Q $(LDCONFIG)
++	$Q cd $(INCLUDE_DIR) && rm -f $(HEADERS)
++	$Q rm -f $(LIB_DIR)/$(STATIC)
++	$Q rm -f $(LIB_DIR)/$(DYNAMIC)
++	$Q rm -f $(LIB_DIR)/$(BASE_NAME).so
++	$Q rm -f $(LIB_DIR)/$(BASE_NAME).so.$(DYN_VERS_MAJ)
+ 
+ 
+ .PHONY:	depend
+diff --git a/examples/Gertboard/Makefile b/examples/Gertboard/Makefile
+index 1939ad6..98d1415 100644
+--- a/examples/Gertboard/Makefile
++++ b/examples/Gertboard/Makefile
+@@ -9,14 +9,20 @@ ifneq ($V,1)
+ Q ?= @
+ endif
+ 
+-#DEBUG	= -g -O0
+-DEBUG	= -O3
+-CC	= gcc
+-INCLUDE	= -I/usr/local/include
+-CFLAGS	= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
+-
+-LDFLAGS	= -L/usr/local/lib
+-LDLIBS    = -lwiringPi -lwiringPiDev -lpthread -lm
++DESTDIR?=/usr
++PREFIX?=/local
++
++INCLUDE_DIR?=$(DESTDIR)$(PREFIX)/include
++LIB_DIR?=$(DESTDIR)$(PREFIX)/lib
++
++#DEBUG	?= -g -O0
++DEBUG	?= -O3
++CC	?= gcc
++INCLUDE	?= -I$(INCLUDE_DIR)
++CFLAGS	?= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
++
++LDFLAGS	?= -L$(LIB_DIR)
++LDLIBS    ?= -lwiringPi -lwiringPiDev -lpthread -lm
+ 
+ # Should not alter anything below this line
+ ###############################################################################
+diff --git a/examples/Makefile b/examples/Makefile
+index e6b9b71..931b167 100644
+--- a/examples/Makefile
++++ b/examples/Makefile
+@@ -26,14 +26,20 @@ ifneq ($V,1)
+ Q ?= @
+ endif
+ 
+-#DEBUG	= -g -O0
+-DEBUG	= -O3
+-CC	= gcc
+-INCLUDE	= -I/usr/local/include
+-CFLAGS	= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
+-
+-LDFLAGS	= -L/usr/local/lib
+-LDLIBS    = -lwiringPi -lwiringPiDev -lpthread -lm
++DESTDIR?=/usr
++PREFIX?=/local
++
++INCLUDE_DIR?=$(DESTDIR)$(PREFIX)/include
++LIB_DIR?=$(DESTDIR)$(PREFIX)/lib
++
++#DEBUG	?= -g -O0
++DEBUG	?= -O3
++CC	?= gcc
++INCLUDE	?= -I$(INCLUDE_DIR)
++CFLAGS	?= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
++
++LDFLAGS	?= -L$(LIB_DIR)
++LDLIBS    ?= -lwiringPi -lwiringPiDev -lpthread -lm
+ 
+ # Should not alter anything below this line
+ ###############################################################################
+diff --git a/examples/PiFace/Makefile b/examples/PiFace/Makefile
+index 4685adc..cfaf902 100644
+--- a/examples/PiFace/Makefile
++++ b/examples/PiFace/Makefile
+@@ -26,14 +26,20 @@ ifneq ($V,1)
+ Q ?= @
+ endif
+ 
+-#DEBUG	= -g -O0
+-DEBUG	= -O3
+-CC	= gcc
+-INCLUDE	= -I/usr/local/include
+-CFLAGS	= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
+-
+-LDFLAGS	= -L/usr/local/lib
+-LDLIBS    = -lwiringPi -lwiringPiDev -lpthread -lm
++DESTDIR?=/usr
++PREFIX?=/local
++
++INCLUDE_DIR?=$(DESTDIR)$(PREFIX)/include
++LIB_DIR?=$(DESTDIR)$(PREFIX)/lib
++
++#DEBUG	?= -g -O0
++DEBUG	?= -O3
++CC	?= gcc
++INCLUDE	?= -I$(INCLUDE_DIR)
++CFLAGS	?= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
++
++LDFLAGS	?= -L$(LIB_DIR)
++LDLIBS    ?= -lwiringPi -lwiringPiDev -lpthread -lm
+ 
+ # Should not alter anything below this line
+ ###############################################################################
+diff --git a/examples/PiGlow/Makefile b/examples/PiGlow/Makefile
+index acd4818..dabd64e 100644
+--- a/examples/PiGlow/Makefile
++++ b/examples/PiGlow/Makefile
+@@ -29,10 +29,10 @@ endif
+ #DEBUG	= -g -O0
+ DEBUG	= -O3
+ CC	= gcc
+-INCLUDE	= -I/usr/local/include
++INCLUDE	= -I../wiringPi -I../wiringPiDev
+ CFLAGS	= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
+ 
+-LDFLAGS	= -L/usr/local/lib
++LDFLAGS	= -L../wiringPi -L../wiringPiDev
+ LDLIBS    = -lwiringPi -lwiringPiDev -lpthread -lm
+ 
+ # Should not alter anything below this line
+diff --git a/examples/q2w/Makefile b/examples/q2w/Makefile
+index 6f50fa0..c5e9f6e 100644
+--- a/examples/q2w/Makefile
++++ b/examples/q2w/Makefile
+@@ -29,10 +29,10 @@ endif
+ #DEBUG	= -g -O0
+ DEBUG	= -O3
+ CC	= gcc
+-INCLUDE	= -I/usr/local/include
++INCLUDE	= -I../wiringPi -I../devLib
+ CFLAGS	= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
+ 
+-LDFLAGS	= -L/usr/local/lib
++LDFLAGS	= -L../wiringPi -L../devLib
+ LDLIBS    = -lwiringPi -lwiringPiDev -lpthread -lm
+ 
+ ###############################################################################
+diff --git a/gpio/Makefile b/gpio/Makefile
+index 7dcd090..83ec454 100644
+--- a/gpio/Makefile
++++ b/gpio/Makefile
+@@ -30,13 +30,17 @@ ifneq ($V,1)
+ Q ?= @
+ endif
+ 
+-#DEBUG	= -g -O0
+-DEBUG	= -O2
+-CC	= gcc
+-INCLUDE	= -I$(DESTDIR)$(PREFIX)/include
+-CFLAGS	= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
++INCLUDE_DIR?=$(DESTDIR)$(PREFIX)/include
++LIB_DIR?=$(DESTDIR)$(PREFIX)/lib
++BIN_DIR?=$(DESTDIR)$(PREFIX)/bin
+ 
+-LDFLAGS	= -L$(DESTDIR)$(PREFIX)/lib
++#DEBUG	?= -g -O0
++DEBUG	?= -O2
++CC	?= gcc
++INCLUDE	?= -I$(INCLUDE_DIR)
++CFLAGS	?= $(DEBUG) -Wall $(INCLUDE) -Winline -pipe
++
++LDFLAGS	?= -L$(LIB_DIR)
+ LIBS    = -lwiringPi -lwiringPiDev -lpthread
+ 
+ # May not need to  alter anything below this line
+@@ -72,13 +76,10 @@ tags:	$(SRC)
+ .PHONY:	install
+ install: gpio
+ 	$Q echo "[Install]"
+-	$Q cp gpio		$(DESTDIR)$(PREFIX)/bin
+-ifneq ($(WIRINGPI_SUID),0)
+-	$Q chown root.root	$(DESTDIR)$(PREFIX)/bin/gpio
+-	$Q chmod 4755		$(DESTDIR)$(PREFIX)/bin/gpio
+-endif
+-	$Q mkdir -p		$(DESTDIR)$(PREFIX)/man/man1
+-	$Q cp gpio.1		$(DESTDIR)$(PREFIX)/man/man1
++	$Q install -d $(BIN_DIR)
++	$Q install -m 4755 -o root -g root gpio $(BIN_DIR)
++	$Q install -d $(DESTDIR)$(PREFIX)/share/man/man1
++	$Q install -m 644 -o root -g root gpio.1 $(DESTDIR)$(PREFIX)/share/man/man1
+ 
+ .PHONY:	install-deb
+ install-deb:	gpio
+@@ -89,7 +90,7 @@ install-deb:	gpio
+ .PHONY:	uninstall
+ uninstall:
+ 	$Q echo "[UnInstall]"
+-	$Q rm -f $(DESTDIR)$(PREFIX)/bin/gpio
++	$Q rm -f $(BIN_DIR)/gpio
+ 	$Q rm -f $(DESTDIR)$(PREFIX)/man/man1/gpio.1
+ 
+ .PHONY:	depend
+diff --git a/wiringPi/Makefile b/wiringPi/Makefile
+index 6bbcc5d..5355b74 100644
+--- a/wiringPi/Makefile
++++ b/wiringPi/Makefile
+@@ -25,19 +25,23 @@ VERSION=$(shell cat ../VERSION)
+ DESTDIR?=/usr
+ PREFIX?=/local
+ 
++INCLUDE_DIR?=$(DESTDIR)$(PREFIX)/include
++LIB_DIR?=$(DESTDIR)$(PREFIX)/lib
++
+ LDCONFIG?=ldconfig
+ 
+ ifneq ($V,1)
+ Q ?= @
+ endif
+ 
+-STATIC=libwiringPi.a
+-DYNAMIC=libwiringPi.so.$(VERSION)
++BASE_NAME=libwiringPi
++STATIC=$(BASE_NAME).a
++DYNAMIC=$(BASE_NAME).so.$(VERSION)
+ 
+-#DEBUG	= -g -O0
+-DEBUG	= -O2
+-CC	= gcc
+-INCLUDE	= -I.
++#DEBUG	?= -g -O0
++DEBUG	?= -O2
++CC	?= gcc
++INCLUDE	?= -I.
+ DEFS	= -D_GNU_SOURCE
+ CFLAGS	= $(DEBUG) $(DEFS) -Wformat=2 -Wall -Winline $(INCLUDE) -pipe -fPIC
+ 
+@@ -89,17 +93,17 @@ $(STATIC):	$(OBJ)
+ 
+ $(DYNAMIC):	$(OBJ)
+ 	$Q echo "[Link (Dynamic)]"
+-	$Q $(CC) -shared -Wl,-soname,libwiringPi.so$(WIRINGPI_SONAME_SUFFIX) -o libwiringPi.so.$(VERSION) -lpthread $(OBJ)
++	$Q $(CC) $(LDFLAGS) -shared -Wl,-soname,$(BASE_NAME).so.$(DYN_VERS_MAJ) -o $(BASE_NAME).so -lpthread $(OBJ)
+ 
+ .c.o:
+ 	$Q echo [Compile] $<
+-	$Q $(CC) -c $(CFLAGS) $< -o $@
++	$Q $(CC) -c $(CFLAGS) -fPIC $< -o $@
+ 
+ 
+ .PHONY:	clean
+ clean:
+ 	$Q echo "[Clean]"
+-	$Q rm -f $(OBJ) $(OBJ_I2C) *~ core tags Makefile.bak libwiringPi.*
++	$Q rm -f $(OBJ) $(OBJ_I2C) *~ core tags Makefile.bak $(BASE_NAME).so* $(BASE_NAME).a
+ 
+ .PHONY:	tags
+ tags:	$(SRC)
+@@ -110,22 +114,22 @@ tags:	$(SRC)
+ .PHONY:	install
+ install:	$(DYNAMIC)
+ 	$Q echo "[Install Headers]"
+-	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/include
+-	$Q install -m 0644 $(HEADERS)					$(DESTDIR)$(PREFIX)/include
++	$Q install -m 0755 -d						$(INCLUDE_DIR)
++	$Q install -m 0644 $(HEADERS)					$(INCLUDE_DIR)
+ 	$Q echo "[Install Dynamic Lib]"
+-	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/lib
+-	$Q install -m 0755 libwiringPi.so.$(VERSION)			$(DESTDIR)$(PREFIX)/lib/libwiringPi.so.$(VERSION)
+-	$Q ln -sf $(DESTDIR)$(PREFIX)/lib/libwiringPi.so.$(VERSION)	$(DESTDIR)/lib/libwiringPi.so
+-	$Q $(LDCONFIG)
++	$Q install -m 0755 -d						$(LIB_DIR)
++	$Q install -m 0755 $(BASE_NAME).so				$(LIB_DIR)/$(DYNAMIC)
++	$Q ln -sf $(DYNAMIC)						$(LIB_DIR)/$(BASE_NAME).so
++	$Q ln -sf $(DYNAMIC)						$(LIB_DIR)/$(BASE_NAME).so.$(DYN_VERS_MAJ)
+ 
+ .PHONY:	install-static
+ install-static:	$(STATIC)
+ 	$Q echo "[Install Headers]"
+-	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/include
+-	$Q install -m 0644 $(HEADERS)					$(DESTDIR)$(PREFIX)/include
++	$Q install -m 0755 -d						$(INCLUDE_DIR)
++	$Q install -m 0644 $(HEADERS)					$(INCLUDE_DIR)
+ 	$Q echo "[Install Static Lib]"
+-	$Q install -m 0755 -d						$(DESTDIR)$(PREFIX)/lib
+-	$Q install -m 0755 libwiringPi.a					$(DESTDIR)$(PREFIX)/lib
++	$Q install -m 0755 -d						$(LIB_DIR)
++	$Q install -m 0755 $(STATIC)					$(LIB_DIR)
+ 
+ .PHONY:	install-deb
+ install-deb:	$(DYNAMIC)
+@@ -140,9 +144,11 @@ install-deb:	$(DYNAMIC)
+ .PHONY:	uninstall
+ uninstall:
+ 	$Q echo "[UnInstall]"
+-	$Q cd $(DESTDIR)$(PREFIX)/include/ && rm -f $(HEADERS)
+-	$Q cd $(DESTDIR)$(PREFIX)/lib/     && rm -f libwiringPi.*
+-	$Q $(LDCONFIG)
++	$Q cd $(INCLUDE_DIR) && rm -f $(HEADERS)
++	$Q rm -f $(LIB_DIR)/$(STATIC)
++	$Q rm -f $(LIB_DIR)/$(DYNAMIC)
++	$Q rm -f $(LIB_DIR)/$(BASE_NAME).so
++	$Q rm -f $(LIB_DIR)/$(BASE_NAME).so.$(DYN_VERS_MAJ)
+ 
+ 
+ .PHONY:	depend
+-- 
+2.1.4
+

recipes-devtools/wiringPi/wiringpi/0001-include-asm-ioctl.h-directly-for-_IOC_SIZEBITS.patch

@@ -0,0 +1,58 @@
+From 7f65eb37a82a6d9b095d9c8f262ad9dd205acd03 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sat, 30 Jan 2016 16:57:38 -0800
+Subject: [PATCH] include <asm/ioctl.h> directly for _IOC_SIZEBITS
+
+Fixes errors like
+| wiringPiSPI.c: In function 'wiringPiSPIDataRW':
+| wiringPiSPI.c:89:35: error: '_IOC_SIZEBITS' undeclared (first use in
+this function)
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+Upstream-Status: Submitted
+
+ wiringPi/wiringPi.c    | 1 +
+ wiringPi/wiringPiI2C.c | 1 +
+ wiringPi/wiringPiSPI.c | 1 +
+ 3 files changed, 3 insertions(+)
+
+diff --git a/wiringPi/wiringPi.c b/wiringPi/wiringPi.c
+index 32e5100..cb5db9d 100644
+--- a/wiringPi/wiringPi.c
++++ b/wiringPi/wiringPi.c
+@@ -64,6 +64,7 @@
+ #include <time.h>
+ #include <fcntl.h>
+ #include <pthread.h>
++#include <asm/ioctl.h>
+ #include <sys/time.h>
+ #include <sys/mman.h>
+ #include <sys/stat.h>
+diff --git a/wiringPi/wiringPiI2C.c b/wiringPi/wiringPiI2C.c
+index c787bce..efdf53c 100644
+--- a/wiringPi/wiringPiI2C.c
++++ b/wiringPi/wiringPiI2C.c
+@@ -52,6 +52,7 @@
+ #include <string.h>
+ #include <fcntl.h>
+ #include <sys/ioctl.h>
++#include <asm/ioctl.h>
+ 
+ #include "wiringPi.h"
+ #include "wiringPiI2C.h"
+diff --git a/wiringPi/wiringPiSPI.c b/wiringPi/wiringPiSPI.c
+index 453df31..ae3c7d9 100644
+--- a/wiringPi/wiringPiSPI.c
++++ b/wiringPi/wiringPiSPI.c
+@@ -27,6 +27,7 @@
+ #include <fcntl.h>
+ #include <errno.h>
+ #include <string.h>
++#include <asm/ioctl.h>
+ #include <sys/ioctl.h>
+ #include <linux/spi/spidev.h>
+ 
+-- 
+2.7.0
+

recipes-devtools/wiringPi/wiringpi_git.bb

@@ -0,0 +1,34 @@
+DESCRIPTION = "A library to control Raspberry Pi GPIO channels"
+HOMEPAGE = "https://projects.drogon.net/raspberry-pi/wiringpi/"
+SECTION = "devel/libs"
+LICENSE = "LGPLv3+"
+LIC_FILES_CHKSUM = "file://COPYING.LESSER;md5=e6a600fd5e1d9cbde2d983680233ad02"
+
+# tag 2.32
+SRCREV = "b0a60c3302973ca1878d149d61f2f612c8f27fac"
+
+S = "${WORKDIR}/git"
+
+SRC_URI = "git://git.drogon.net/wiringPi \
+           file://0001-Add-initial-cross-compile-support.patch \
+           file://0001-include-asm-ioctl.h-directly-for-_IOC_SIZEBITS.patch \
+           "
+
+COMPATIBLE_MACHINE = "raspberrypi"
+
+CFLAGS_prepend = "-I${S}/wiringPi -I${S}/devLib "
+
+EXTRA_OEMAKE += "'INCLUDE_DIR=${D}${includedir}' 'LIB_DIR=${D}${libdir}'"
+EXTRA_OEMAKE += "'DESTDIR=${D}/usr' 'PREFIX=""'"
+
+do_compile() {
+    oe_runmake -C devLib
+    oe_runmake -C wiringPi
+    oe_runmake -C gpio 'LDFLAGS=${LDFLAGS} -L${S}/wiringPi -L${S}/devLib'
+}
+
+do_install() {
+    oe_runmake -C devLib install
+    oe_runmake -C wiringPi install
+    oe_runmake -C gpio install
+}

recipes-extra/startup/rpi-first-run-wizard.bb

@@ -1,37 +0,0 @@
-DESCRIPTION = "Scripts to support a first run wizard on the Raspberry Pi."
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://${WORKDIR}/LICENSE;md5=b234ee4d69f5fce4486a80fdaf4a4263"
-
-DEPENDS = "zenity dbus"
-RDEPENDS_${PN} = "slim sudo zenity dbus"
-
-COMPATIBLE_MACHINE = "raspberrypi"
-
-PR = "r2"
-
-SRC_URI = " \
-          file://LICENSE \
-          file://first-run-wizard.sh \
-          file://rpi_startup.sh \
-          file://rc.firstrun \
-"
-
-inherit update-rc.d
-
-INITSCRIPT_NAME = "rpi-run-init"
-INITSCRIPT_PARAMS = "start 29 2 3 4 5 . stop  29 2 3 4 5 ."
-
-do_install() {
-          install -d ${D}${prefix}/rpi/scripts/
-          install -m 0755 ${WORKDIR}/first-run-wizard.sh ${D}${prefix}/rpi/scripts/
-          install -m 0755 ${WORKDIR}/rpi_startup.sh ${D}${prefix}/rpi/scripts/
-
-          install -d ${D}${sysconfdir}/init.d/
-          install -m 0755 ${WORKDIR}/rc.firstrun ${D}${sysconfdir}/init.d/rpi-run-init
-
-          install -d ${D}${sysconfdir}/rpi/
-}
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-FILES_${PN} += "${prefix} ${sysconfdir}"

recipes-extra/startup/rpi-first-run-wizard/LICENSE

@@ -1,339 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-                            NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.

recipes-extra/startup/rpi-first-run-wizard/first-run-wizard.sh

@@ -1,213 +0,0 @@
-#!/bin/sh
-
-# Initially based on the scripts by JohnX/Mer Project - http://wiki.maemo.org/Mer/
-# Reworked for the OpenPandora - John Willis/Michael Mrozek
-# Quickly 'hacked' for the Raspberry Pi to provide a simple 1st boot wizard.
-
-# You can start the wizard from the shell using 'xinit ./first-boot-init.sh'
-
-export LANG=en_GB.UTF-8
-export GTK2_RC_FILES=/usr/share/themes/Xfce/gtk-2.0/gtkrc
-
-# Ensure there is a wheel group for sudoers to be put into.
-# TODO: Do this somewhere better.
-groupadd wheel
-
-# Default error message (should a user hit cancel, validation fail etc.).
-ERROR_WINDOW='zenity --title="Error" --error --text="Sorry! Please try again." --timeout 6'
-
-RESET_ROOT="yes"
-
-DISPLAY=:0 xset s off
-
-# Greet the user.
-
-if zenity --question --title="Pandoras Box has been opened." --text="Welcome!\n\nPandora's Box has been opened.\n\nThis wizard will help you setting up your new OpenPandora handheld before the first use.\n\nYou will be asked a few simple questions to personalise and configure your device.\n\nDo you want to set up your unit now or shut the unit down and do it later?" --ok-label="Start now" --cancel-label="Shutdown" ; then
-# ----
-
-# Reset ROOT's password to something random 
-
-# (I know the image build sets the password to something pusdo-random)
-# (ok, urandom is not 100% secure but it's good enough for our needs)
-
-if [ $RESET_ROOT == "yes" ]; then
-	rootpwd=$(cat /dev/urandom|tr -dc "a-zA-Z0-9-_\$\?"|fold -w 30|head -n 1)
-passwd "root" <<EOF
-$rootpwd
-$rootpwd
-EOF
-	rootpwd=""
-fi
-
-# ----
-
-# Setup swap partition if the user has placed an SD with a swap partition on it.
-
-swap_part=$(sfdisk -l /dev/mmcblk? | grep swap | cut -d" " -f1)
-if [ x$swap_part != x ] ; then
-	use_swap=$(zenity --title="Enable swap?" --text "Swap partition found on SD card. Would you like to use it?\n\nWarning: This SD must remain in the system to use the swap." --list --radiolist --column " " --column "Answer" TRUE "Use swap on $swap_part" FALSE "Do not use swap")
-	if [ "$use_swap" = "Use swap on $swap_part" ] ; then
-		swapon $swap_part
-       		echo "$swap_part none swap sw 0 0" >> /etc/fstab
-	fi
-fi
-
-# ----
-
-# Setup the full name and username.
-
-while ! name=$(zenity --title="Please enter your full name" --entry --text "Please enter your full name.") || [ "x$name" = "x" ] ; do
-	zenity --title="Error" --error --text="Please try again." --timeout 6
-done
-
-username_guess=$(echo "$name" | cut -d" " -f1 | tr A-Z a-z)
-
-while ! username=$(zenity --title="Enter your username" --entry --text "Please choose a short username.\n\nIt should be all lowercase and contain only letters and numbers." --entry-text "$username_guess") || [ "x$username" = "x" ] ; do
-	zenity --title="Error" --error --text="Please try again." --timeout 6
-done
-
-while ! useradd -c "$name,,," -G adm,audio,video,netdev,wheel,plugdev,users "$username" ; do
-	username=$(zenity --title="Please check username" --entry --text "Please ensure that your username consists of only\nletters and numbers and is not already in use on the system." --entry-text "$username")
-done
-
-# ----
-
-# Setup the users password.
-
-password=""
-while [ x$password = x ] ; do
-	password1=$(zenity --title=Password --entry --text="Please choose a new password." --hide-text)
-	password2=$(zenity --title=Confirm --entry --text="Confirm your new password." --hide-text)
-	if [ $password1 != $password2 ] ; then 
-		zenity --title="Error" --error --text="The passwords do not match.\n\nPlease try again." --timeout 6
-	else 
-		if [ x$password1 = x ] ; then
-			zenity --title="Error" --error --text="Password cannot be blank!\n\nPlease try again." --timeout 6
-		else
-			password=$password1
-		fi
-	fi
-done
-
-passwd "$username" <<EOF
-$password
-$password
-EOF
-
-# ----
-
-# Pick a name for the OpenPandora.
-
-while ! hostname=$(zenity --title="Name your Pandora" --entry --text "Please choose a name for your OpenPandora.\n\nIt should only contain letters, numbers and dashes, no spaces." --entry-text "$username-openpandora") || [ "x$hostname" = "x" ]; do 
-	zenity --title="Error" --error --text="Please try again."
-done
-
-
-echo $hostname > /etc/hostname
-hostname =$(sed 's/ /_/g' /etc/hostname)
-echo $hostname > /etc/hostname
-echo "127.0.0.1 localhost.localdomain localhost $hostname" > /etc/hosts
-hostname -F /etc/hostname
-
-# Set the correct user for Autologin and enable / disable it.
-
-if zenity --question --title="Autologin" --text="Do you wish to automatically login at startup?\n\nSecurity warning: This skips the password check on startup" --ok-label="Yes" --cancel-label="No"; then      	
-	# echo "PREFERED_USER=$username" > /etc/default/autologin
-	sed -i "s/.*default_user.*/default_user $username/g" /etc/slim.conf
-	sed -i 's/.*auto_login.*/auto_login yes/g' /etc/slim.conf
-else
-	if zenity --question --title="User" --text="Do you wish to have your username automatically populated in the login screen?\n\nNote: This is ideal if you're the only user of the OpenPandora but wish to disable autologin and use a password." --ok-label="Yes" --cancel-label="No"; then 
-		sed -i "s/.*default_user.*/default_user $username/g" /etc/slim.conf
-		sed -i 's/.*auto_login.*/auto_login no/g' /etc/slim.conf
-	else
-		sed -i "s/.*default_user.*/default_user/g" /etc/slim.conf
-		sed -i 's/.*auto_login.*/auto_login no/g' /etc/slim.conf
-	fi
-fi
-
-# ----
-
-# Select the default interface and setup SLiM to pass that as a sesion to ~./.xinitrc
-
-selection=""
-while [ x$selection = x ]; do
-selection=$(cat /etc/pandora/conf/gui.conf | awk -F\; '{print $1 "\n" $2 }' | zenity --width=500 --height=300 --title="Select the Default GUI" --list --column "Name" --column "Description" --text "Please select the Default GUI" )
-if [ x$selection = x ]; then
-  zenity --title="Error" --error --text="Please select a GUI." --timeout=6
-fi
-done
-
-echo $selection
-
-gui=$(grep $selection /etc/pandora/conf/gui.conf | awk -F\; '{print $3}')
-stopcommand=$(grep $selection /etc/pandora/conf/gui.conf | awk -F\; '{print $4}')
-
-echo $gui
-
-if [ $gui ]; then 
-  sed -i "s/.*DEFAULT_SESSION=.*/DEFAULT_SESSION=$gui/g" /home/$username/.xinitrc
-  echo $selection selected as default interface
-  zenity --info --title="Selected session" --text "You selected $selection as default setting. You can always change your default GUI later." --timeout 6
-else
-  sed -i 's/.*DEFAULT_SESSION=.*/DEFAULT_SESSION=startxfce4/g' /home/$username/.xinitrc
-fi
-
-# ----
-
-# Set the timezone and date/time
-
-while ! area=$(zenity --list --title "Select your time zone" --text="Please select your area" --column="Select your area" --print-column=1 "Africa" "America" "Asia" "Australia" "Europe" "Pacific" --width=500 --height=260) || [ "x$area" = "x" ] ; do
-	zenity --title="Error" --error --text="Please select your area." --timeout=6
-done
-
-while ! timezone=$(ls -1 /usr/share/zoneinfo/$area | zenity ---width=500 --height=200 --title="Select your closest location" --list --column "Closest Location" --text "Please select the location closest to you") || [ "x$timezone" = "x" ] ; do
-	zenity --title="Error" --error --text="Please select your location." --timeout=6
-done
-
-echo $timezone
-rm /etc/localtime && ln -s /usr/share/zoneinfo/$area/$timezone /etc/localtime
-
-# Make sure we clean up any leading zeros in the day (as Zenity freaks out)
-date_d=`date +%d | sed 's/^0//'`
-date_m=`date +%m | sed 's/^0//'`
-date_y=`date +%Y`
-
-while ! date=$(zenity --calendar --text="Please select the current date" --title "Please select the current date" --day=$date_d --month=$date_m --year=$date_y --date-format="%Y%m%d" --width=500) || [ "x$date" = "x" ] ; do
-        zenity --title="Error" --error --text="Please select the date." --timeout 6
-done
-
-echo $date
-
-time_h=`date +%H`
-time_m=`date +%M`
-
-while ! time=$(zenity --title="Enter actual time" --entry --text "Please enter the time in 24hour format (HH:MM):" --entry-text "$time_h:$time_m") || [ "x$time" = "x" ] ; do
-        zenity --title="Error" --error --text="Please input the time." --timeout 6
-done
-
-while ! date -d $time ; do
-	time=$(zenity --title="Enter actual time" --entry --text "Please enter the time in 24hour format (HH:MM):" --entry-text "$time_h:$time_m")
-done
- 
-date +%Y%m%d -s $date
-date +%H:%M -s $time
-
-# ----
-
-# Finsh up and boot the system.
-
-zenity --info --title="Finished" --text "This concludes the First Boot Wizard.\n\nYour chosen interface will start in a few seconds\n\nThankyou for buying the OpenPandora. Enjoy using the device!" --timeout 6
-
-# ----
-
-# Write the control file so this script is not run on next boot 
-# (hackish I know but I want the flexability to drop a new script in later esp. in the early firmwares).
-
-touch /etc/rpi/first-boot
-# Make the control file writeable by all to allow the user to delete to rerun the wizard on next boot.
-chmod 0666 /etc/rpi/first-boot
-
-# ----
-else
-poweroff
-fi

recipes-extra/startup/rpi-first-run-wizard/rc.firstrun

@@ -1,73 +0,0 @@
-#!/bin/sh
-
-### BEGIN INIT INFO
-# Provides:          rpiruninit
-# Required-Start:    #adjust
-# Required-Stop:     #adjust
-# Default-Start:     2 3 4 5
-# Default-Stop:      0 1 6
-### END INIT INFO
- 
-DESC="Raspberry Pi Startup Script Deamon"
-NAME="rpiruninit"
-
-PID=`pidof -o %PPID -x rpi_startup.sh`
-OPRUNINIT='/usr/rpi/scripts/rpi_startup.sh'
-
-d_stop() {
-	if [ $PID ]
-	then
-		kill $PID
-	else
-		echo "$DESC: $NAME not running."
-	fi
-}
-
-d_start() {
-	if [ $PID ]
-	then
-		echo "$DESC: $NAME already running."
-	else
-		$OPRUNINIT
-	fi
-}
-
-d_reload() {
-	if [ $PID ]
-	then
-		kill -HUP $PID
-	else
-		echo "$DESC: $NAME not running."
-	fi
-}
-
-case "$1" in
-  start)
-	echo -n "Starting $DESC: $NAME"
-	d_start
-	echo "."
-	;;
-  stop)
-	echo -n "Stopping $DESC: $NAME"
-	d_stop
-	echo "."
-	;;
-  reload)
-	echo -n "Reloading $DESC: $NAME"
-	d_reload
-	echo "."
-	;;	
-  restart|force-reload)
-	echo -n "Restarting $DESC: $NAME"
-	d_stop
-	sleep 1
-	d_start
-	echo "."
-	;;
-  *)
-	echo "Usage: $0 {start|stop|restart|reload|force-reload}" >&2
-	exit 1
-	;;
-esac
-
-exit 0

recipes-extra/startup/rpi-first-run-wizard/rpi_startup.sh

@@ -1,6 +0,0 @@
-#!/bin/sh
-
-OP_CHECKFILE='/etc/rpi/first-boot'
-OP_FIRSTRUN='xinit /usr/rpi/scripts/first-run-wizard.sh'
-
-[ -f $OP_CHECKFILE ] && echo -e "\nOP_STARTUP: $OP_CHECKFILE exists, not first boot." || $OP_FIRSTRUN

recipes-graphics/eglinfo/eglinfo-fb_%.bbappend

@@ -0,0 +1 @@
+EGLINFO_DEVICE_rpi  = "raspberrypi"

recipes-graphics/eglinfo/eglinfo-x11_%.bbappend

@@ -0,0 +1,2 @@
+EGLINFO_DEVICE_rpi  = "raspberrypi"
+ASNEEDED = ""

recipes-graphics/userland/userland/0001-Allow-applications-to-set-next-resource-handle.patch

@@ -0,0 +1,208 @@
+From 83c5ac5892d0cd29caa8922ff8b639b9a373c3cb Mon Sep 17 00:00:00 2001
+From: Dom Cobley <dc4@broadcom.com>
+Date: Tue, 9 Jul 2013 09:26:26 -0400
+Subject: [PATCH 01/13] Allow applications to set next resource handle
+
+This patch adds provisions in userland to
+let apps callers set the next rendereing dispmanx resource.
+It's useful for implementing, say, a buffer carousel.
+---
+ interface/khronos/common/khrn_client_rpc.h |  2 ++
+ interface/khronos/common/khrn_int_ids.h    |  2 ++
+ interface/khronos/egl/egl_client.c         | 30 +++++++++++++++++++++++++++---
+ interface/khronos/egl/egl_client_surface.c | 24 +++++++++++++++++++++++-
+ interface/khronos/egl/egl_client_surface.h |  3 ++-
+ interface/khronos/egl/egl_int_impl.h       |  5 +++--
+ 6 files changed, 59 insertions(+), 7 deletions(-)
+
+diff --git a/interface/khronos/common/khrn_client_rpc.h b/interface/khronos/common/khrn_client_rpc.h
+index 418aa67..a7557a8 100644
+--- a/interface/khronos/common/khrn_client_rpc.h
++++ b/interface/khronos/common/khrn_client_rpc.h
+@@ -683,6 +683,7 @@ static INLINE void rpc_call12_out_ctrl(CLIENT_THREAD_STATE_T *thread,uint32_t id
+ static INLINE void rpc_call13_out_ctrl(CLIENT_THREAD_STATE_T *thread,uint32_t id, uint32_t p0, uint32_t p1, uint32_t p2, uint32_t p3, uint32_t p4, uint32_t p5, uint32_t p6, uint32_t p7, uint32_t p8, uint32_t p9, uint32_t p10, uint32_t p11, void *out)               { rpc_begin(thread); RPC_CALL(thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11);      rpc_recv(thread, out, NULL, (RPC_RECV_FLAG_T)(RPC_RECV_FLAG_CTRL | RPC_RECV_FLAG_LEN)); rpc_end(thread); }
+ static INLINE void rpc_call14_out_ctrl(CLIENT_THREAD_STATE_T *thread,uint32_t id, uint32_t p0, uint32_t p1, uint32_t p2, uint32_t p3, uint32_t p4, uint32_t p5, uint32_t p6, uint32_t p7, uint32_t p8, uint32_t p9, uint32_t p10, uint32_t p11, uint32_t p12, void *out) { rpc_begin(thread); RPC_CALL(thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12); rpc_recv(thread, out, NULL, (RPC_RECV_FLAG_T)(RPC_RECV_FLAG_CTRL | RPC_RECV_FLAG_LEN)); rpc_end(thread); }
+ static INLINE void rpc_call15_out_ctrl(CLIENT_THREAD_STATE_T *thread,uint32_t id, uint32_t p0, uint32_t p1, uint32_t p2, uint32_t p3, uint32_t p4, uint32_t p5, uint32_t p6, uint32_t p7, uint32_t p8, uint32_t p9, uint32_t p10, uint32_t p11, uint32_t p12, uint32_t p13, void *out) { rpc_begin(thread); RPC_CALL(thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13); rpc_recv(thread, out, NULL, (RPC_RECV_FLAG_T)(RPC_RECV_FLAG_CTRL | RPC_RECV_FLAG_LEN)); rpc_end(thread); }
++static INLINE void rpc_call16_out_ctrl(CLIENT_THREAD_STATE_T *thread,uint32_t id, uint32_t p0, uint32_t p1, uint32_t p2, uint32_t p3, uint32_t p4, uint32_t p5, uint32_t p6, uint32_t p7, uint32_t p8, uint32_t p9, uint32_t p10, uint32_t p11, uint32_t p12, uint32_t p13, uint32_t p14, void *out) { rpc_begin(thread); RPC_CALL(thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14); rpc_recv(thread, out, NULL, (RPC_RECV_FLAG_T)(RPC_RECV_FLAG_CTRL | RPC_RECV_FLAG_LEN)); rpc_end(thread); }
+ #endif
+ 
+ #define RPC_CALL1_OUT_CTRL(fn, thread, id, out)                                               rpc_call1_out_ctrl(thread, id, out)
+@@ -700,6 +701,7 @@ static INLINE void rpc_call15_out_ctrl(CLIENT_THREAD_STATE_T *thread,uint32_t id
+ #define RPC_CALL13_OUT_CTRL(fn, thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, out)      rpc_call13_out_ctrl(thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, out)
+ #define RPC_CALL14_OUT_CTRL(fn, thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, out) rpc_call14_out_ctrl(thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, out)
+ #define RPC_CALL15_OUT_CTRL(fn, thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, out) rpc_call15_out_ctrl(thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, out)
++#define RPC_CALL16_OUT_CTRL(fn, thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, out) rpc_call16_out_ctrl(thread, id, p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, out)
+ 
+ # if !defined(__SYMBIAN32__)  //use functions defined in khrpc.cpp
+ static INLINE uint32_t rpc_call1_out_ctrl_res(CLIENT_THREAD_STATE_T *thread,uint32_t id, void *out)                                                                                                                       { uint32_t res; rpc_begin(thread); RPC_CALL(thread, id);                                     res = rpc_recv(thread, out, NULL, (RPC_RECV_FLAG_T)(RPC_RECV_FLAG_RES | RPC_RECV_FLAG_CTRL | RPC_RECV_FLAG_LEN)); rpc_end(thread); return res; }
+diff --git a/interface/khronos/common/khrn_int_ids.h b/interface/khronos/common/khrn_int_ids.h
+index 8378f4a..ec961e0 100644
+--- a/interface/khronos/common/khrn_int_ids.h
++++ b/interface/khronos/common/khrn_int_ids.h
+@@ -367,6 +367,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+ 
+ #define EGLINTCREATESURFACE_ID            0x4000
++#define EGLINTCREATESURFACE_ID_V2         0x4100
+ #define EGLINTCREATEGLES11_ID             0x4001
+ #define EGLINTCREATEGLES20_ID             0x4002
+ #define EGLINTCREATEVG_ID                 0x4003
+@@ -377,6 +378,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ #define EGLINTMAKECURRENT_ID              0x4008
+ #define EGLINTFLUSHANDWAIT_ID             0x4009
+ #define EGLINTSWAPBUFFERS_ID              0x400a
++#define EGLINTSWAPBUFFERS_ID_V2           0x410a
+ #define EGLINTSELECTMIPMAP_ID             0x400b
+ #define EGLINTFLUSH_ID                    0x400c
+ #define EGLINTGETCOLORDATA_ID             0x400d
+diff --git a/interface/khronos/egl/egl_client.c b/interface/khronos/egl/egl_client.c
+index 472ef0c..234da65 100644
+--- a/interface/khronos/egl/egl_client.c
++++ b/interface/khronos/egl/egl_client.c
+@@ -162,6 +162,17 @@ static void egl_current_release(CLIENT_PROCESS_STATE_T *process, EGL_CURRENT_T *
+ void egl_gl_flush_callback(bool wait);
+ void egl_vg_flush_callback(bool wait);
+ 
++#include "interface/vmcs_host/vc_dispmanx_types.h"
++/**HACKHACK - give us the ability to inject a DispmanX 
++ * resource handle into the CreateWindowSurface and 
++ * SwapBuffers calls */ 
++static DISPMANX_RESOURCE_HANDLE_T next_resource_handle;
++
++EGLAPI EGLBoolean EGLAPIENTRY eglSetNextResourceHandle(DISPMANX_RESOURCE_HANDLE_T handle)
++{
++   next_resource_handle = handle;
++}
++
+ /*
+ TODO: do an RPC call to make sure the Khronos vll is loaded (and that it stays loaded until eglTerminate)
+ Also affects global image (and possibly others?)
+@@ -644,7 +655,8 @@ EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig c
+                                 false,
+                                 EGL_NO_TEXTURE,
+                                 EGL_NO_TEXTURE,
+-                                0, 0);
++                                0, 0,
++                                next_resource_handle);
+ 
+                if (surface) {
+                   if (khrn_pointer_map_insert(&process->surfaces, process->next_surface, surface)) {
+@@ -889,7 +901,7 @@ EGLAPI EGLSurface EGLAPIENTRY eglCreatePbufferSurface(EGLDisplay dpy, EGLConfig
+                              mipmap_texture,
+                              texture_format,
+                              texture_target,
+-                             0, 0);
++                             0, 0, 0);
+ 
+             if (surface) {
+                if (khrn_pointer_map_insert(&process->surfaces, process->next_surface, surface)) {
+@@ -1031,7 +1043,7 @@ EGLAPI EGLSurface EGLAPIENTRY eglCreatePixmapSurface(EGLDisplay dpy, EGLConfig c
+                                    false,
+                                    EGL_NO_TEXTURE,
+                                    EGL_NO_TEXTURE,
+-                                   pixmap, ((server_handle[0] == 0) && (server_handle[1] == (uint32_t)(-1))) ? NULL : server_handle);
++                                   pixmap, ((server_handle[0] == 0) && (server_handle[1] == (uint32_t)(-1))) ? NULL : server_handle, 0);
+ 
+                      if (surface) {
+                         if (khrn_pointer_map_insert(&process->surfaces, process->next_surface, surface)) {
+@@ -2303,6 +2315,18 @@ EGLAPI EGLBoolean EGLAPIENTRY eglSwapBuffers(EGLDisplay dpy, EGLSurface surf)
+ 
+                vcos_log_trace("eglSwapBuffers server call");
+ 
++               if (next_resource_handle)
++               RPC_CALL7(eglIntSwapBuffers_impl,
++                     thread,
++                     EGLINTSWAPBUFFERS_ID_V2,
++                     RPC_UINT(surface->serverbuffer),
++                     RPC_UINT(surface->width),
++                     RPC_UINT(surface->height),
++                     RPC_UINT(surface->internal_handle),
++                     RPC_UINT(surface->swap_behavior == EGL_BUFFER_PRESERVED ? 1 : 0),
++                     RPC_UINT(khrn_platform_get_window_position(surface->win)),
++                     RPC_INT(next_resource_handle));
++               else
+                RPC_CALL6(eglIntSwapBuffers_impl,
+                      thread,
+                      EGLINTSWAPBUFFERS_ID,
+diff --git a/interface/khronos/egl/egl_client_surface.c b/interface/khronos/egl/egl_client_surface.c
+index 0fa1fd1..0dc10e2 100644
+--- a/interface/khronos/egl/egl_client_surface.c
++++ b/interface/khronos/egl/egl_client_surface.c
+@@ -314,7 +314,8 @@ EGL_SURFACE_T *egl_surface_create(
+    EGLenum texture_format,
+    EGLenum texture_target,
+    EGLNativePixmapType pixmap,
+-   const uint32_t *pixmap_server_handle)
++   const uint32_t *pixmap_server_handle,
++   DISPMANX_RESOURCE_HANDLE_T next_resource_handle)
+ {
+    KHRN_IMAGE_FORMAT_T color;
+    KHRN_IMAGE_FORMAT_T depth;
+@@ -473,6 +474,27 @@ EGL_SURFACE_T *egl_surface_create(
+ #endif
+          uint32_t results[3];
+ 
++         if (next_resource_handle)
++         RPC_CALL16_OUT_CTRL(eglIntCreateSurface_impl,
++                             thread,
++                             EGLINTCREATESURFACE_ID_V2,
++                             RPC_UINT(serverwin),
++                             RPC_UINT(buffers),
++                             RPC_UINT(width),
++                             RPC_UINT(height),
++                             RPC_UINT(color),
++                             RPC_UINT(depth),
++                             RPC_UINT(mask),
++                             RPC_UINT(multi),
++                             RPC_UINT(largest_pbuffer),
++                             RPC_UINT(mipmap_texture),
++                             RPC_UINT(config_depth_bits),
++                             RPC_UINT(config_stencil_bits),
++                             RPC_UINT(sem_name),
++                             RPC_UINT(type),
++                             RPC_INT(next_resource_handle),
++                             results);
++         else
+          RPC_CALL15_OUT_CTRL(eglIntCreateSurface_impl,
+                              thread,
+                              EGLINTCREATESURFACE_ID,
+diff --git a/interface/khronos/egl/egl_client_surface.h b/interface/khronos/egl/egl_client_surface.h
+index c99d44c..b5bf70a 100644
+--- a/interface/khronos/egl/egl_client_surface.h
++++ b/interface/khronos/egl/egl_client_surface.h
+@@ -322,7 +322,8 @@ extern EGL_SURFACE_T *egl_surface_create(
+    EGLenum texture_format,
+    EGLenum texture_target,
+    EGLNativePixmapType pixmap,
+-   const uint32_t *pixmap_server_handle);
++   const uint32_t *pixmap_server_handle,
++   DISPMANX_RESOURCE_HANDLE_T next_resource_handle);
+ extern EGL_SURFACE_T *egl_surface_from_vg_image(
+    VGImage vg_handle,
+    EGLSurface name,
+diff --git a/interface/khronos/egl/egl_int_impl.h b/interface/khronos/egl/egl_int_impl.h
+index 8a5734c..51b3580 100644
+--- a/interface/khronos/egl/egl_int_impl.h
++++ b/interface/khronos/egl/egl_int_impl.h
+@@ -56,7 +56,8 @@ FN(int, eglIntCreateSurface_impl, (
+    uint32_t config_stencil_bits,
+    uint32_t sem,
+    uint32_t type,
+-   uint32_t *results))
++   uint32_t *results,
++   DISPMANX_RESOURCE_HANDLE_T next_resource_handle))
+ 
+ FN(int, eglIntCreatePbufferFromVGImage_impl, (
+    VGImage vg_handle,
+@@ -110,7 +111,7 @@ FN(void, eglIntMakeCurrent_impl, (uint32_t pid_0, uint32_t pid_1, uint32_t glver
+ FN(int, eglIntFlushAndWait_impl, (uint32_t flushgl, uint32_t flushvg))
+ FN(void, eglIntFlush_impl, (uint32_t flushgl, uint32_t flushvg))
+ 
+-FN(void, eglIntSwapBuffers_impl, (EGL_SURFACE_ID_T s, uint32_t width, uint32_t height, uint32_t handle, uint32_t preserve, uint32_t position))
++FN(void, eglIntSwapBuffers_impl, (EGL_SURFACE_ID_T s, uint32_t width, uint32_t height, uint32_t handle, uint32_t preserve, uint32_t position, DISPMANX_RESOURCE_HANDLE_T new_back_buffer))
+ FN(void, eglIntSelectMipmap_impl, (EGL_SURFACE_ID_T s, int level))
+ 
+ FN(void, eglIntGetColorData_impl, (EGL_SURFACE_ID_T s, KHRN_IMAGE_FORMAT_T format, uint32_t width, uint32_t height, int32_t stride, uint32_t y_offset, void *data))
+-- 
+2.9.0
+

recipes-graphics/userland/userland/0004-wayland-egl-Add-bcm_host-to-dependencies.patch

@@ -0,0 +1,28 @@
+From e3df3fec01aefac3ec301f6f3d5ec3e91652b9c5 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Mon, 10 Aug 2015 02:38:27 -0700
+Subject: [PATCH 04/13] wayland-egl: Add bcm_host to dependencies
+
+It uses headers like vcos_platform_types.h but does not
+depend on module which should add the required include paths
+lets add the dependency on bcm_host module which should do it
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ interface/khronos/wayland-egl/wayland-egl.pc.in | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/interface/khronos/wayland-egl/wayland-egl.pc.in b/interface/khronos/wayland-egl/wayland-egl.pc.in
+index 8bafc15..fd259c9 100644
+--- a/interface/khronos/wayland-egl/wayland-egl.pc.in
++++ b/interface/khronos/wayland-egl/wayland-egl.pc.in
+@@ -6,5 +6,6 @@ includedir=${prefix}/include
+ Name: wayland-egl
+ Description: VideoCore wayland-egl library
+ Version: @PROJECT_APIVER@
++Requires: bcm_host
+ Libs: -L${libdir} -lwayland-egl
+ Cflags: -I${includedir}
+-- 
+2.9.0
+

recipes-graphics/userland/userland/0005-interface-remove-faulty-assert-to-make-weston-happy-.patch

@@ -0,0 +1,29 @@
+From 6c9d407c9ec0859380e7bcf35cf915cef4b3687b Mon Sep 17 00:00:00 2001
+From: "Yann E. MORIN" <yann.morin.1998@free.fr>
+Date: Sat, 24 Jan 2015 22:07:19 +0100
+Subject: [PATCH 05/13] interface: remove faulty assert() to make weston happy
+ at runtime
+
+This was removed after a discussion on IRC with the weston guys
+('daniels' on irc.freenode.net/#wayland).
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+---
+ interface/vmcs_host/vc_vchi_dispmanx.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/interface/vmcs_host/vc_vchi_dispmanx.c b/interface/vmcs_host/vc_vchi_dispmanx.c
+index 3e668f5..8e065dc 100755
+--- a/interface/vmcs_host/vc_vchi_dispmanx.c
++++ b/interface/vmcs_host/vc_vchi_dispmanx.c
+@@ -1304,7 +1304,6 @@ static void *dispmanx_notify_func( void *arg ) {
+          // Decrement the use count - the corresponding "use" is in vc_dispmanx_update_submit.
+          vchi_service_release(dispmanx_client.notify_handle[0]);
+          if (dispmanx_client.update_callback ) {
+-            vcos_assert( dispmanx_client.pending_update_handle == handle);
+             dispmanx_client.update_callback(handle, dispmanx_client.update_callback_param);
+          }
+       } else {
+-- 
+2.9.0
+

recipes-graphics/userland/userland/0006-zero-out-wl-buffers-in-egl_surface_free.patch

@@ -0,0 +1,33 @@
+From e3ffe9438fe8417586d0045d00eb1368ca3a71b6 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sat, 6 Feb 2016 11:10:47 -0800
+Subject: [PATCH 06/13] zero-out wl buffers in egl_surface_free
+
+origins from buildroot
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ interface/khronos/egl/egl_client_surface.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/interface/khronos/egl/egl_client_surface.c b/interface/khronos/egl/egl_client_surface.c
+index 49cf7e5..512c83b 100644
+--- a/interface/khronos/egl/egl_client_surface.c
++++ b/interface/khronos/egl/egl_client_surface.c
+@@ -690,11 +690,13 @@ void egl_surface_free(EGL_SURFACE_T *surface)
+       if (surface->back_wl_buffer) {
+          wl_buffer_destroy(surface->back_wl_buffer->wl_buffer);
+          free(surface->back_wl_buffer);
++         surface->back_wl_buffer = 0;
+       }
+ 
+       if (surface->front_wl_buffer) {
+          wl_buffer_destroy(surface->front_wl_buffer->wl_buffer);
+          free(surface->front_wl_buffer);
++         surface->front_wl_buffer = 0;
+       }
+ #endif
+    }
+-- 
+2.9.0
+

recipes-graphics/userland/userland/0007-initialize-front-back-wayland-buffers.patch

@@ -0,0 +1,34 @@
+From ed31a6a206c9e205bd5316e95788e5d7bb837e38 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sat, 6 Feb 2016 11:11:41 -0800
+Subject: [PATCH 07/13] initialize front back wayland buffers
+
+origins from metrological wayland support
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ interface/khronos/egl/egl_client_surface.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/interface/khronos/egl/egl_client_surface.c b/interface/khronos/egl/egl_client_surface.c
+index 512c83b..a429724 100644
+--- a/interface/khronos/egl/egl_client_surface.c
++++ b/interface/khronos/egl/egl_client_surface.c
+@@ -401,11 +401,14 @@ EGL_SURFACE_T *egl_surface_create(
+ #ifdef BUILD_WAYLAND
+    if (type == WINDOW && wl_display) {
+       surface->wl_egl_window = (struct wl_egl_window*)win;
++      surface->front_wl_buffer = NULL;
+       surface->back_wl_buffer = allocate_wl_buffer(
+             surface->wl_egl_window, color);
+       resource = surface->back_wl_buffer->resource;
+    } else {
+       surface->wl_egl_window = NULL;
++      surface->front_wl_buffer = NULL;
++      surface->back_wl_buffer = NULL;
+       resource = DISPMANX_NO_HANDLE;
+    }
+ #endif
+-- 
+2.9.0
+

recipes-graphics/userland/userland/0008-Remove-RPC_FLUSH.patch

@@ -0,0 +1,27 @@
+From 6e173040a825185013ccbbb33113442207f10eeb Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sat, 6 Feb 2016 11:09:18 -0800
+Subject: [PATCH 08/13] Remove RPC_FLUSH
+
+Origins from buildroot
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ interface/khronos/ext/gl_oes_egl_image_client.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/interface/khronos/ext/gl_oes_egl_image_client.c b/interface/khronos/ext/gl_oes_egl_image_client.c
+index f9b7287..b04ffef 100644
+--- a/interface/khronos/ext/gl_oes_egl_image_client.c
++++ b/interface/khronos/ext/gl_oes_egl_image_client.c
+@@ -107,7 +107,6 @@ GL_API void GL_APIENTRY glEGLImageTargetTexture2DOES (GLenum target, GLeglImageO
+                    GLEGLIMAGETARGETTEXTURE2DOES_ID,
+                    RPC_ENUM(target),
+                    RPC_EGLID(image));
+-         RPC_FLUSH(thread);
+ #if EGL_BRCM_global_image
+       }
+ #endif
+-- 
+2.9.0
+

recipes-graphics/userland/userland/0009-fix-cmake-dependency-race.patch

@@ -0,0 +1,78 @@
+From c4217231fd78daee83b0c0f312c1d392aa6e0f47 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sat, 6 Feb 2016 13:12:47 -0800
+Subject: [PATCH 09/13] fix cmake dependency race
+
+Fixes errors like
+
+/a/builder/mnt/build-oe/tmp-glibc/work/raspberrypi2-oe-linux-gnueabi/userland/git-r5/git/interface/vmcs_host/vc_vchi_dispmanx.h:72:66:
+fatal error: interface/vmcs_host/wayland-dispmanx-server-protocol.h: No
+such file or directory
+compilation terminated.
+interface/khronos/CMakeFiles/EGL_static.dir/build.make:773: recipe for
+target 'interface/khronos/CMakeFiles/EGL_static.dir/ext/egl_wayland.c.o'
+failed
+make[2]: ***
+[interface/khronos/CMakeFiles/EGL_static.dir/ext/egl_wayland.c.o] Error 1
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ interface/vcos/pthreads/CMakeLists.txt | 8 ++++++++
+ interface/vmcs_host/CMakeLists.txt     | 8 --------
+ interface/vmcs_host/vc_vchi_dispmanx.h | 2 +-
+ 3 files changed, 9 insertions(+), 9 deletions(-)
+
+diff --git a/interface/vcos/pthreads/CMakeLists.txt b/interface/vcos/pthreads/CMakeLists.txt
+index 1d81ca3..d6cd415 100644
+--- a/interface/vcos/pthreads/CMakeLists.txt
++++ b/interface/vcos/pthreads/CMakeLists.txt
+@@ -33,6 +33,14 @@ set (SOURCES
+    ../generic/vcos_generic_blockpool.c
+ )
+ 
++if (BUILD_WAYLAND)
++wayland_add_protocol_server(
++    SOURCES
++    ../../../interface/wayland/dispmanx.xml
++    dispmanx
++)
++endif ()
++
+ if (VCOS_PTHREADS_BUILD_SHARED)
+    add_library (vcos SHARED ${SOURCES})
+    target_link_libraries (vcos pthread dl rt)
+diff --git a/interface/vmcs_host/CMakeLists.txt b/interface/vmcs_host/CMakeLists.txt
+index 35150ed..22949a8 100755
+--- a/interface/vmcs_host/CMakeLists.txt
++++ b/interface/vmcs_host/CMakeLists.txt
+@@ -17,14 +17,6 @@ set(VCHOSTIF_SOURCE
+ #            ${VMCS_TARGET}/vmcs_main.c
+ #  vc_vchi_haud.c
+ 
+-if (BUILD_WAYLAND)
+-wayland_add_protocol_server(
+-    VCHOSTIF_SOURCE
+-    ../../interface/wayland/dispmanx.xml
+-    dispmanx
+-)
+-endif ()
+-
+ add_library(vchostif ${VCHOSTIF_SOURCE})
+ 
+ #add_library(bufman            vc_vchi_bufman.c            )
+diff --git a/interface/vmcs_host/vc_vchi_dispmanx.h b/interface/vmcs_host/vc_vchi_dispmanx.h
+index f0bae30..8c44c58 100644
+--- a/interface/vmcs_host/vc_vchi_dispmanx.h
++++ b/interface/vmcs_host/vc_vchi_dispmanx.h
+@@ -69,7 +69,7 @@ typedef struct {
+ #ifdef BUILD_WAYLAND
+ /* XXX: This should be in a private header that can be included from EGL and vc_* */
+ #include <wayland-server.h>
+-#include "interface/vmcs_host/wayland-dispmanx-server-protocol.h"
++#include "interface/vcos/pthreads/wayland-dispmanx-server-protocol.h"
+ struct wl_dispmanx_server_buffer {
+ 	struct wl_resource *resource;
+ 	struct wl_dispmanx *dispmanx;
+-- 
+2.9.0
+

recipes-graphics/userland/userland/0010-Fix-enum-conversion-warnings.patch

@@ -0,0 +1,99 @@
+From 377f6aada3b7569e3d662fc830e01b8c5ba8a15d Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Thu, 18 Feb 2016 09:04:46 +0000
+Subject: [PATCH 10/13] Fix enum conversion warnings
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ interface/mmal/openmaxil/mmalomx_core.c              | 4 ++--
+ interface/mmal/openmaxil/mmalomx_parameters.c        | 6 +++---
+ interface/mmal/openmaxil/mmalomx_util_params_video.c | 8 ++++----
+ 3 files changed, 9 insertions(+), 9 deletions(-)
+
+diff --git a/interface/mmal/openmaxil/mmalomx_core.c b/interface/mmal/openmaxil/mmalomx_core.c
+index 9bc632b..20d4fc7 100644
+--- a/interface/mmal/openmaxil/mmalomx_core.c
++++ b/interface/mmal/openmaxil/mmalomx_core.c
+@@ -281,7 +281,7 @@ static OMX_ERRORTYPE mmalomx_ComponentGetParameter(
+       {
+          OMX_PARAM_PORTDEFINITIONTYPE *param = (OMX_PARAM_PORTDEFINITIONTYPE *)pParam;
+          PARAM_GET_PORT(port, component, param->nPortIndex);
+-         return mmalil_error_to_mmal(mmalomx_get_port_settings(port, param));
++         return mmalil_error_to_omx(mmalomx_get_port_settings(port, param));
+       }
+       return OMX_ErrorNone;
+       break;
+@@ -475,7 +475,7 @@ static OMX_ERRORTYPE mmalomx_ComponentSetParameter(
+       {
+          OMX_PARAM_PORTDEFINITIONTYPE *param = (OMX_PARAM_PORTDEFINITIONTYPE *)pParam;
+          PARAM_GET_PORT(port, component, param->nPortIndex);
+-         return mmalil_error_to_mmal(mmalomx_set_port_settings(port, param));
++         return mmalil_error_to_omx(mmalomx_set_port_settings(port, param));
+       }
+       return OMX_ErrorNone;
+       break;
+diff --git a/interface/mmal/openmaxil/mmalomx_parameters.c b/interface/mmal/openmaxil/mmalomx_parameters.c
+index a20a5bd..c4f97d4 100644
+--- a/interface/mmal/openmaxil/mmalomx_parameters.c
++++ b/interface/mmal/openmaxil/mmalomx_parameters.c
+@@ -170,7 +170,7 @@ static OMX_ERRORTYPE mmalomx_parameter_get_xlat(MMALOMX_COMPONENT_T *component,
+ 
+    if (xlat->fn.custom)
+    {
+-      return mmalil_error_to_mmal(xlat->fn.custom(MMALOMX_PARAM_MAPPING_TO_OMX, xlat, mmal_header,
++      return mmalil_error_to_omx(xlat->fn.custom(MMALOMX_PARAM_MAPPING_TO_OMX, xlat, mmal_header,
+          pParam, mmal_port));
+    }
+ 
+@@ -554,14 +554,14 @@ OMX_ERRORTYPE mmalomx_parameter_set(MMALOMX_COMPONENT_T *component,
+          port->mmal->format->es->video.par.num = param->nX;
+          port->mmal->format->es->video.par.den = param->nY;
+          mmal_rational_simplify(&port->mmal->format->es->video.par);
+-         return mmalil_error_to_mmal(mmal_port_format_commit(port->mmal));
++         return mmalil_error_to_omx(mmal_port_format_commit(port->mmal));
+       }
+    case OMX_IndexParamColorSpace:
+       {
+          OMX_PARAM_COLORSPACETYPE *param = (OMX_PARAM_COLORSPACETYPE *)pParam;
+          PARAM_GET_PORT(port, component, param->nPortIndex);
+          port->mmal->format->es->video.color_space = mmalil_omx_color_space_to_mmal(param->eColorSpace);
+-         return mmalil_error_to_mmal(mmal_port_format_commit(port->mmal));
++         return mmalil_error_to_omx(mmal_port_format_commit(port->mmal));
+       }
+    case OMX_IndexParamBrcmVideoCroppingDisable:
+       {
+diff --git a/interface/mmal/openmaxil/mmalomx_util_params_video.c b/interface/mmal/openmaxil/mmalomx_util_params_video.c
+index f088296..83e3724 100644
+--- a/interface/mmal/openmaxil/mmalomx_util_params_video.c
++++ b/interface/mmal/openmaxil/mmalomx_util_params_video.c
+@@ -56,11 +56,11 @@ static MMAL_STATUS_T mmalomx_param_mapping_displayregion(MMALOMX_PARAM_MAPPING_D
+       mmal->set = omx->set;
+       mmal->display_num = omx->num;
+       mmal->fullscreen = omx->fullscreen;
+-      mmal->transform = omx->transform;
++      mmal->transform = (MMAL_DISPLAYTRANSFORM_T)omx->transform;
+       rect_to_mmal(&mmal->dest_rect, &omx->dest_rect);
+       rect_to_mmal(&mmal->src_rect, &omx->src_rect);
+       mmal->noaspect = omx->noaspect;
+-      mmal->mode = omx->mode;
++      mmal->mode = (MMAL_DISPLAYMODE_T)omx->mode;
+       mmal->pixel_x = omx->pixel_x;
+       mmal->pixel_y = omx->pixel_y;
+       mmal->layer = omx->layer;
+@@ -72,11 +72,11 @@ static MMAL_STATUS_T mmalomx_param_mapping_displayregion(MMALOMX_PARAM_MAPPING_D
+       omx->set        = mmal->set;
+       omx->num        = mmal->display_num;
+       omx->fullscreen = mmal->fullscreen;
+-      omx->transform  = mmal->transform;
++      omx->transform  = (OMX_DISPLAYTRANSFORMTYPE)mmal->transform;
+       rect_to_omx(&omx->dest_rect, &mmal->dest_rect);
+       rect_to_omx(&omx->src_rect, &mmal->src_rect);
+       omx->noaspect   = mmal->noaspect;
+-      omx->mode       = mmal->mode;
++      omx->mode       = (OMX_DISPLAYMODETYPE)mmal->mode;
+       omx->pixel_x    = mmal->pixel_x;
+       omx->pixel_y    = mmal->pixel_y;
+       omx->layer      = mmal->layer;
+-- 
+2.9.0
+

recipes-graphics/userland/userland/0011-Fix-for-framerate-with-nested-composition.patch

@@ -0,0 +1,60 @@
+From 6e634184ee4b3d2c98c3213a3931845ec3014754 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Tue, 29 Mar 2016 20:38:30 -0700
+Subject: [PATCH 11/13] Fix for framerate with nested composition
+
+frame rate appears irregular and lower than expected when using nested composition.
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ interface/khronos/egl/egl_client.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+diff --git a/interface/khronos/egl/egl_client.c b/interface/khronos/egl/egl_client.c
+index 024f3ed..83970ec 100644
+--- a/interface/khronos/egl/egl_client.c
++++ b/interface/khronos/egl/egl_client.c
+@@ -2342,6 +2342,9 @@ EGLAPI EGLBoolean EGLAPIENTRY eglSwapBuffers(EGLDisplay dpy, EGLSurface surf)
+                      surface->back_wl_buffer = buffer;
+                   }
+ 
++                  glFlush();
++                  glFinish();
++
+                   RPC_CALL7(eglIntSwapBuffers_impl,
+                         thread,
+                         EGLINTSWAPBUFFERS_ID_V2,
+@@ -2353,6 +2356,8 @@ EGLAPI EGLBoolean EGLAPIENTRY eglSwapBuffers(EGLDisplay dpy, EGLSurface surf)
+                         RPC_UINT(khrn_platform_get_window_position(surface->win)),
+                         RPC_INT(surface->back_wl_buffer->resource));
+ 
++                  RPC_FLUSH(thread);
++
+                   surface->front_wl_buffer->in_use = 1;
+                   wl_surface_attach(wl_egl_window->wl_surface,
+                                     surface->front_wl_buffer->wl_buffer,
+@@ -2360,11 +2365,13 @@ EGLAPI EGLBoolean EGLAPIENTRY eglSwapBuffers(EGLDisplay dpy, EGLSurface surf)
+                   wl_surface_damage(wl_egl_window->wl_surface, 0, 0,
+                                     surface->width, surface->height);
+                   wl_surface_commit(wl_egl_window->wl_surface);
++                  wl_display_flush(wl_display);
+ 
+                   while(ret != -1 && surface->back_wl_buffer->in_use)
+                      ret = wl_display_dispatch_queue(wl_display, process->wl_queue);
+                } else
+ #endif
++               {
+                RPC_CALL6(eglIntSwapBuffers_impl,
+                      thread,
+                      EGLINTSWAPBUFFERS_ID,
+@@ -2376,6 +2383,7 @@ EGLAPI EGLBoolean EGLAPIENTRY eglSwapBuffers(EGLDisplay dpy, EGLSurface surf)
+                      RPC_UINT(khrn_platform_get_window_position(surface->win)));
+ 
+                RPC_FLUSH(thread);
++               }
+ 
+ #ifdef ANDROID
+                CLIENT_UNLOCK();
+-- 
+2.9.0
+

recipes-graphics/userland/userland/0012-build-shared-library-for-vchostif.patch

@@ -0,0 +1,28 @@
+From 559209ce15027b3370466ccb56223a7a66d2a40c Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sat, 2 Apr 2016 10:37:24 -0700
+Subject: [PATCH 12/13] build shared library for vchostif
+
+Fixes #149
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ interface/vmcs_host/CMakeLists.txt | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/interface/vmcs_host/CMakeLists.txt b/interface/vmcs_host/CMakeLists.txt
+index 22949a8..f8c2f2f 100755
+--- a/interface/vmcs_host/CMakeLists.txt
++++ b/interface/vmcs_host/CMakeLists.txt
+@@ -17,7 +17,7 @@ set(VCHOSTIF_SOURCE
+ #            ${VMCS_TARGET}/vmcs_main.c
+ #  vc_vchi_haud.c
+ 
+-add_library(vchostif ${VCHOSTIF_SOURCE})
++add_library(vchostif SHARED ${VCHOSTIF_SOURCE})
+ 
+ #add_library(bufman            vc_vchi_bufman.c            )
+ 
+-- 
+2.9.0
+

recipes-graphics/userland/userland/0013-implement-buffer-wrapping-interface-for-dispmanx.patch

@@ -0,0 +1,92 @@
+From 5b55a152651eece345d9ea1e0e40ecd9fc4ca2d5 Mon Sep 17 00:00:00 2001
+From: Khem Raj <raj.khem@gmail.com>
+Date: Sat, 2 Apr 2016 10:54:59 -0700
+Subject: [PATCH 13/13] implement buffer wrapping interface for dispmanx
+
+Courtesy: Zan Dobersek
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ interface/khronos/ext/egl_wayland.c | 42 +++++++++++++++++++++++++++++++++++++
+ interface/wayland/dispmanx.xml      | 10 +++++++++
+ 2 files changed, 52 insertions(+)
+
+diff --git a/interface/khronos/ext/egl_wayland.c b/interface/khronos/ext/egl_wayland.c
+index 5730743..9ef89cd 100644
+--- a/interface/khronos/ext/egl_wayland.c
++++ b/interface/khronos/ext/egl_wayland.c
+@@ -133,8 +133,50 @@ dispmanx_create_buffer(struct wl_client *client, struct wl_resource *resource,
+                                      buffer->handle);
+ }
+ 
++static void
++dispmanx_wrap_buffer(struct wl_client *client, struct wl_resource *resource,
++                     uint32_t id, uint32_t handle, int32_t width, int32_t height,
++                     uint32_t stride, uint32_t buffer_height, uint32_t format)
++{
++   struct wl_dispmanx_server_buffer *buffer;
++   VC_IMAGE_TYPE_T vc_format = get_vc_format(format);
++   uint32_t dummy;
++
++   if(vc_format == VC_IMAGE_MIN) {
++      wl_resource_post_error(resource,
++                             WL_DISPMANX_ERROR_INVALID_FORMAT,
++                             "invalid format");
++      return;
++   }
++
++   buffer = calloc(1, sizeof *buffer);
++   if (buffer == NULL) {
++      wl_resource_post_no_memory(resource);
++      return;
++   }
++
++   buffer->handle = handle;
++   buffer->width = width;
++   buffer->height = height;
++   buffer->format = format;
++
++   buffer->resource = wl_resource_create(resource->client, &wl_buffer_interface,
++                                         1, id);
++   if (!buffer->resource) {
++      wl_resource_post_no_memory(resource);
++      vc_dispmanx_resource_delete(buffer->handle);
++      free(buffer);
++      return;
++   }
++
++   wl_resource_set_implementation(buffer->resource,
++				       (void (**)(void)) &dispmanx_buffer_interface,
++				       buffer, destroy_buffer);
++}
++
+ static const struct wl_dispmanx_interface dispmanx_interface = {
+    dispmanx_create_buffer,
++   dispmanx_wrap_buffer,
+ };
+ 
+ static void
+diff --git a/interface/wayland/dispmanx.xml b/interface/wayland/dispmanx.xml
+index c18626d..11ed1ef 100644
+--- a/interface/wayland/dispmanx.xml
++++ b/interface/wayland/dispmanx.xml
+@@ -118,6 +118,16 @@
+       <arg name="buffer" type="object" interface="wl_buffer"/>
+       <arg name="handle" type="uint"/>
+     </event>
++
++    <request name="wrap_buffer">
++      <arg name="id" type="new_id" interface="wl_buffer"/>
++      <arg name="handle" type="uint"/>
++      <arg name="width" type="int"/>
++      <arg name="height" type="int"/>
++      <arg name="stride" type="uint"/>
++      <arg name="buffer_height" type="uint"/>
++      <arg name="format" type="uint"/>
++    </request>
+   </interface>
+ 
+ </protocol>
+-- 
+2.9.0
+

recipes-graphics/userland/userland_git.bb

@@ -2,38 +2,74 @@ DESCRIPTION = "This repository contains the source code for the ARM side \
 libraries used on Raspberry Pi. These typically are installed in /opt/vc/lib \
 and includes source for the ARM side code to interface to: EGL, mmal, GLESv2,\
 vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG."
-LICENSE = "Broadcom"
-LIC_FILES_CHKSUM = "file://LICENCE;md5=957f6640d5e2d2acfce73a36a56cb32f"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://LICENCE;md5=0448d6488ef8cc380632b1569ee6d196"
 
-PR = "r1"
+PR = "r5"
 
 PROVIDES = "virtual/libgles2 \
             virtual/egl"
+
+RPROVIDES_${PN} += "libgles2 libgl"
+
 COMPATIBLE_MACHINE = "raspberrypi"
 
-SRCREV = "8700279495e266378d36092ccf86424f0ee2539f"
-SRC_URI = "git://github.com/raspberrypi/userland.git;protocol=git;branch=master \
-          "
+SRCBRANCH = "master"
+SRCFORK = "raspberrypi"
+SRCREV = "0147f98bdd4fdc822d25d8a70cf5adc5adb89096"
+
+SRC_URI = "\
+    git://github.com/${SRCFORK}/userland.git;protocol=git;branch=${SRCBRANCH} \
+    file://0001-Allow-applications-to-set-next-resource-handle.patch \
+    file://0002-wayland-Add-support-for-the-Wayland-winsys.patch \
+    file://0003-wayland-Add-Wayland-example.patch \
+    file://0004-wayland-egl-Add-bcm_host-to-dependencies.patch \
+    file://0005-interface-remove-faulty-assert-to-make-weston-happy-.patch \
+    file://0006-zero-out-wl-buffers-in-egl_surface_free.patch \
+    file://0007-initialize-front-back-wayland-buffers.patch \
+    file://0008-Remove-RPC_FLUSH.patch \
+    file://0009-fix-cmake-dependency-race.patch \
+    file://0010-Fix-enum-conversion-warnings.patch \
+    file://0011-Fix-for-framerate-with-nested-composition.patch \
+    file://0012-build-shared-library-for-vchostif.patch \
+    file://0013-implement-buffer-wrapping-interface-for-dispmanx.patch \
+"
 S = "${WORKDIR}/git"
 
-inherit cmake
+inherit cmake pkgconfig
 
-EXTRA_OECMAKE = " \
-                 -DCMAKE_BUILD_TYPE=Release \
-                "
-# The compiled binaries don't provide sonames.
-SOLIBS = "${SOLIBSDEV}"
+EXTRA_OECMAKE = "-DCMAKE_BUILD_TYPE=Release -DCMAKE_EXE_LINKER_FLAGS='-Wl,--no-as-needed' \
+                 -DVMCS_INSTALL_PREFIX=${exec_prefix} \
+"
 
-do_install_append() {
-    mkdir -p ${D}/${prefix}
-    mv ${D}/opt/vc/* ${D}/${prefix}
-    rm -rf ${D}/opt
+PACKAGECONFIG ?= "${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)}"
+
+PACKAGECONFIG[wayland] = "-DBUILD_WAYLAND=TRUE -DWAYLAND_SCANNER_EXECUTABLE:FILEPATH=${STAGING_BINDIR_NATIVE}/wayland-scanner,,wayland-native wayland"
+
+CFLAGS_append = " -fPIC"
+
+do_install_append () {
+	for f in `find ${D}${includedir}/interface/vcos/ -name "*.h"`; do
+		sed -i 's/include "vcos_platform.h"/include "pthreads\/vcos_platform.h"/g' ${f}
+		sed -i 's/include "vcos_futex_mutex.h"/include "pthreads\/vcos_futex_mutex.h"/g' ${f}
+		sed -i 's/include "vcos_platform_types.h"/include "pthreads\/vcos_platform_types.h"/g' ${f}
+	done
 }
 
-FILES_${PN} += "${libdir}/*${SOLIBS}"
-FILES_${PN}-dev = "${includedir} \
+# Shared libs from userland package  build aren't versioned, so we need
+# to force the .so files into the runtime package (and keep them
+# out of -dev package).
+FILES_SOLIBSDEV = ""
+INSANE_SKIP_${PN} += "dev-so"
+
+FILES_${PN} += " \
+    ${libdir}/*.so \
+    ${libdir}/plugins"
+FILES_${PN}-dev += "${includedir} \
                    ${prefix}/src"
 FILES_${PN}-doc += "${datadir}/install"
+FILES_${PN}-dbg += "${libdir}/plugins/.debug"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
+RDEPENDS_${PN} += "bash"

recipes-graphics/vc-graphics/vc-graphics-hardfp.bb

@@ -1,8 +1,6 @@
-
 CONFLICTS = "vc-graphics"
 
 VCDIR = "hardfp/opt/vc"
 require vc-graphics.inc
 
 PR = "${INCPR}.0"
-

recipes-graphics/vc-graphics/vc-graphics.bb

@@ -1,8 +1,6 @@
-
 CONFLICTS = "vc-graphics-hardfp"
 
 VCDIR = "opt/vc"
 require vc-graphics.inc
 
 PR = "${INCPR}.0"
-

recipes-graphics/vc-graphics/vc-graphics.inc

@@ -6,13 +6,14 @@ LIC_FILES_CHKSUM = "file://LICENCE;md5=86e53f5f5909ee66900418028de11780"
 PROVIDES = "virtual/libgles2 virtual/egl"
 COMPATIBLE_MACHINE = "raspberrypi"
 
-include ../common/firmware.inc
+include recipes-bsp/common/firmware.inc
 
-SRC_URI = "git://github.com/raspberrypi/firmware.git;protocol=git;branch=master\
-           file://egl.pc \
-           file://vchiq.sh"
+SRC_URI += " \
+    file://egl.pc \
+    file://vchiq.sh \
+"
 
-S = "${WORKDIR}/git/${VCDIR}"
+S = "${RPIFW_S}/${VCDIR}"
 
 INCPR = "r1"
 
@@ -48,6 +49,8 @@ INITSCRIPT_PARAMS = "start 03 S ."
 FILES_${PN} = "${bindir}/* \
                ${sbindir}/* \
                ${libdir}/lib*.so \
-               ${sysconfdir}/init.d"
+               ${sysconfdir}/init.d \
+               ${libdir}/plugins"
 FILES_${PN}-dev = "${libdir}/pkgconfig \
                    ${includedir}"
+FILES_${PN}-dbg += "${libdir}/plugins/.debug"

recipes-graphics/wayland/weston_%.bbappend

@@ -0,0 +1,4 @@
+EXTRA_OECONF_append_rpi = "\
+        --enable-rpi-compositor \
+        WESTON_NATIVE_BACKEND=rpi-backend.so \
+       "

recipes-graphics/weston/weston_%.bbappend

@@ -0,0 +1,7 @@
+EXTRA_OECONF += "--enable-rpi-compositor \
+             --disable-resize-optimization \
+             --disable-setuid-install \
+             --disable-xwayland-test \
+             --disable-simple-egl-clients \
+             WESTON_NATIVE_BACKEND=rpi-backend.so \
+"

recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d/98-pitft.conf

@@ -0,0 +1,5 @@
+Section "Device"
+    Identifier "Adafruit PiTFT"
+    Driver "fbdev"
+    Option "fbdev" "/dev/fb1"
+EndSection

recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d/99-calibration.conf

@@ -0,0 +1,6 @@
+Section "InputClass"
+        Identifier      "calibration"
+        MatchProduct    "stmpe-ts"
+        Option  "Calibration"   "3800 200 200 3800"
+        Option  "SwapAxes"      "1"
+EndSection

recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend

@@ -1,16 +1,19 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 
-# Don't forget to bump PRINC if you update the extra files.
-PRINC := "${@int(PRINC) + 5}"
+SRC_URI_append_rpi = " file://xorg.conf.d/10-evdev.conf \
+                       file://xorg.conf.d/98-pitft.conf \
+                       file://xorg.conf.d/99-calibration.conf \
+                     "
 
-THISDIR := "${@os.path.dirname(bb.data.getVar('FILE', d, True))}"
-FILESPATH =. "${@base_set_filespath(["${THISDIR}/${PN}"], d)}:"
-
-SRC_URI_append_raspberrypi = " file://xorg.conf.d/* "
-
-do_install_append_raspberrypi () {
+do_install_append_rpi () {
 	install -d ${D}/${sysconfdir}/X11/xorg.conf.d/
-	install -m 0644 ${WORKDIR}/xorg.conf.d/* ${D}/${sysconfdir}/X11/xorg.conf.d/
+	install -m 0644 ${WORKDIR}/xorg.conf.d/10-evdev.conf ${D}/${sysconfdir}/X11/xorg.conf.d/
+
+	PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
+	if [ "${PITFT}" = "1" ]; then
+		install -m 0644 ${WORKDIR}/xorg.conf.d/98-pitft.conf ${D}/${sysconfdir}/X11/xorg.conf.d/
+		install -m 0644 ${WORKDIR}/xorg.conf.d/99-calibration.conf ${D}/${sysconfdir}/X11/xorg.conf.d/
+	fi
 }
 
-FILES_${PN}_raspberrypi += "${sysconfdir}/X11/xorg.conf ${sysconfdir}/X11/xorg.conf.d/*"
+FILES_${PN}_rpi += "${sysconfdir}/X11/xorg.conf ${sysconfdir}/X11/xorg.conf.d/*"

recipes-kernel/linux-firmware/linux-firmware/LICENSE.broadcom_brcm80211

@@ -0,0 +1,205 @@
+SOFTWARE LICENSE AGREEMENT
+
+Unless you and Broadcom Corporation (“Broadcom”) execute a separate written
+software license agreement governing use of the accompanying software, this
+software is licensed to you under the terms of this Software License Agreement
+(“Agreement”).
+
+ANY USE, REPRODUCTION OR DISTRIBUTION OF THE SOFTWARE CONSTITUTES YOUR
+ACCEPTANCE OF THIS AGREEMENT.
+
+1.	DEFINITIONS.
+
+1.1.	“Broadcom Product” means any of the proprietary integrated circuit
+product(s) sold by Broadcom with which the Software was designed to be used, or
+their successors.
+
+1.2.	“Licensee” means you or if you are accepting on behalf of an entity
+then the entity and its affiliates exercising rights under, and complying with
+all of the terms of this Agreement.
+
+1.3.	“Software” shall mean that software made available by Broadcom to
+Licensee in binary code form with this Agreement.
+
+2.	LICENSE GRANT; OWNERSHIP
+
+2.1.	License Grants.  Subject to the terms and conditions of this Agreement,
+Broadcom hereby grants to Licensee a non-exclusive, non-transferable,
+royalty-free license (i) to use and integrate the Software in conjunction with
+any other software; and (ii) to reproduce and distribute the Software complete,
+unmodified and as provided by Broadcom, and only for use with a Broadcom
+Product.
+
+2.2.	Restriction on Modification.  Licensee may not make any modifications
+to the Software.
+
+2.3.	Restriction on Distribution.  Licensee shall only distribute the
+Software under the terms of this Agreement and a copy of this Agreement
+accompanies such distribution.
+
+2.4.	Proprietary Notices.  Licensee shall not remove, efface or obscure any
+copyright or trademark notices from the Software.  Licensee shall include
+reproductions of the Broadcom copyright notice with each copy of the Software,
+except where such Software is embedded in a manner not readily accessible to
+the end user.  Licensee acknowledges that any symbols, trademarks, tradenames,
+and service marks adopted by Broadcom to identify the Software belong to
+Broadcom and that Licensee shall have no rights therein.
+
+2.5.	Ownership.  Broadcom shall retain all right, title and interest,
+including all intellectual property rights, in and to the Software.  Licensee
+hereby covenants that it will not assert any claim that the Software created by
+or for Broadcom infringe any intellectual property right owned or controlled by
+Licensee; provided however, the foregoing shall not apply in case the Agreement
+is terminated.
+
+2.6.	No Other Rights Granted; Restrictions.  Apart from the license rights
+expressly set forth in this Agreement, Broadcom does not grant and Licensee
+does not receive any ownership right, title or interest nor any security
+interest or other interest in any intellectual property rights relating to the
+Software, nor in any copy of any part of the foregoing.  No license is granted
+to Licensee in any human readable code of the Software (source code). Licensee
+shall not (i) use, license, sell or otherwise distribute the Software except as
+provided in this Agreement, (ii) attempt to modify in any way, reverse
+engineer, decompile or disassemble any portion of the Software; or (iii) use
+the Software or other material in violation of any applicable law or
+regulation, including but not limited to any regulatory agency, such as FCC,
+rules.
+
+3.	NO WARRANTY OR SUPPORT
+
+3.1.	No Warranty. THE SOFTWARE IS OFFERED “AS IS,” AND BROADCOM GRANTS AND
+LICENSEE RECEIVES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, BY STATUTE,
+COMMUNICATION OR CONDUCT WITH LICENSEE, OR OTHERWISE.  BROADCOM SPECIFICALLY
+DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A SPECIFIC
+PURPOSE OR NONINFRINGEMENT CONCERNING THE SOFTWARE OR ANY UPGRADES TO OR
+DOCUMENTATION FOR THE SOFTWARE.  WITHOUT LIMITATION OF THE ABOVE, BROADCOM
+GRANTS NO WARRANTY THAT THE SOFTWARE IS ERROR-FREE OR WILL OPERATE WITHOUT
+INTERRUPTION, AND GRANTS NO WARRANTY REGARDING ITS USE OR THE RESULTS THEREFROM
+INCLUDING, WITHOUT LIMITATION, ITS CORRECTNESS, ACCURACY OR RELIABILITY.
+
+3.2.	No Support.  Nothing in this agreement shall obligate Broadcom to
+provide any support for the Software. Broadcom may, but shall be under no
+obligation to, correct any defects in the Software and/or provide updates to
+licensees of the Software.  Licensee shall make reasonable efforts to promptly
+report to Broadcom any defects it finds in the Software, as an aid to creating
+improved revisions of the Software.
+
+3.3.	Dangerous Applications.  The Software is not designed, intended, or
+certified for use in components of systems intended for the operation of
+weapons, weapons systems, nuclear installations, means of mass transportation,
+aviation, life-support computers or equipment (including resuscitation
+equipment and surgical implants), pollution control, hazardous substances
+management, or for any other dangerous application in which the failure of the
+Software could create a situation where personal injury or death may occur. 
+Licensee understands that use of the Software in such applications is fully at
+the risk of Licensee.
+
+4.	TERM AND TERMINATION
+
+4.1.	Termination.  This Agreement will automatically terminate if Licensee
+fails to comply with any of the terms and conditions hereof. In such event,
+Licensee must destroy all copies of the Software and all of its component
+parts.
+
+4.2.	Effect Of Termination.  Upon any termination of this Agreement, the
+rights and licenses granted to Licensee under this Agreement shall immediately
+terminate.
+
+4.3.	Survival.  The rights and obligations under this Agreement which by
+their nature should survive termination will remain in effect after expiration
+or termination of this Agreement.
+
+5.	CONFIDENTIALITY
+
+5.1.	Obligations.  Licensee acknowledges and agrees that any documentation
+relating to the Software, and any other information (if such other information
+is identified as confidential or should be recognized as confidential under the
+circumstances) provided to Licensee by Broadcom hereunder (collectively,
+“Confidential Information”) constitute the confidential and proprietary
+information of Broadcom, and that Licensee’s protection thereof is an essential
+condition to Licensee’s use and possession of the Software.  Licensee shall
+retain all Confidential Information in strict confidence and not disclose it to
+any third party or use it in any way except under a written agreement with
+terms and conditions at least as protective as the terms of this Section.
+Licensee will exercise at least the same amount of diligence in preserving the
+secrecy of the Confidential Information as it uses in preserving the secrecy of
+its own most valuable confidential information, but in no event less than
+reasonable diligence.  Information shall not be considered Confidential
+Information if and to the extent that it: (i) was in the public domain at the
+time it was disclosed or has entered the public domain through no fault of
+Licensee; (ii) was known to Licensee, without restriction, at the time of
+disclosure as proven by the files of Licensee in existence at the time of
+disclosure; or (iii) becomes known to Licensee, without restriction, from a
+source other than Broadcom without breach of this Agreement by Licensee and
+otherwise not in violation of Broadcom’s rights.
+
+5.2.	Return of Confidential Information.  Notwithstanding the foregoing, all
+documents and other tangible objects containing or representing Broadcom
+Confidential Information and all copies thereof which are in the possession of
+Licensee shall be and remain the property of Broadcom, and shall be promptly
+returned to Broadcom upon written request by Broadcom or upon termination of
+this Agreement.
+
+6.	LIMITATION OF LIABILITY TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO
+EVENT SHALL BROADCOM OR ANY OF BROADCOM’S LICENSORS HAVE ANY LIABILITY FOR ANY
+INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER FOR BREACH OF CONTRACT, TORT (INCLUDING
+NEGLIGENCE) OR OTHERWISE, ARISING OUT OF THIS AGREEMENT, INCLUDING BUT NOT
+LIMITED TO LOSS OF PROFITS, EVEN IF SUCH PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL BROADCOM’S LIABILITY WHETHER IN
+CONTRACT, TORT (INCLUDING NEGLIGENCE), OR OTHERWISE, EXCEED THE AMOUNT PAID BY
+LICENSEE FOR SOFTWARE UNDER THIS AGREEMENT.  THESE LIMITATIONS SHALL APPLY
+NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
+
+7.	MISCELLANEOUS
+
+7.1.	Export Regulations. YOU UNDERSTAND AND AGREE THAT THE SOFTWARE IS
+SUBJECT TO UNITED STATES AND OTHER APPLICABLE EXPORT-RELATED LAWS AND
+REGULATIONS AND THAT YOU MAY NOT EXPORT, RE-EXPORT OR TRANSFER THE SOFTWARE OR
+ANY DIRECT PRODUCT OF THE SOFTWARE EXCEPT AS PERMITTED UNDER THOSE LAWS.
+WITHOUT LIMITING THE FOREGOING, EXPORT, RE-EXPORT OR TRANSFER OF THE SOFTWARE
+TO CUBA, IRAN, NORTH KOREA, SUDAN AND SYRIA IS PROHIBITED.
+
+7.2	Assignment. This Agreement shall be binding upon and inure to the
+benefit of the parties and their respective successors and assigns, provided,
+however that Licensee may not assign this Agreement or any rights or obligation
+hereunder, directly or indirectly, by operation of law or otherwise, without
+the prior written consent of Broadcom, and any such attempted assignment shall
+be void.  Notwithstanding the foregoing, Licensee may assign this Agreement to
+a successor to all or substantially all of its business or assets to which this
+Agreement relates that is not a competitor of Broadcom.
+
+7.3.	Governing Law; Venue.  This Agreement shall be governed by the laws of
+California without regard to any conflict-of-laws rules, and the United Nations
+Convention on Contracts for the International Sale of Goods is hereby excluded.
+The sole jurisdiction and venue for actions related to the subject matter
+hereof shall be the state and federal courts located in the County of Orange,
+California, and both parties hereby consent to such jurisdiction and venue.
+
+7.4.	Severability.  All terms and provisions of this Agreement shall, if
+possible, be construed in a manner which makes them valid, but in the event any
+term or provision of this Agreement is found by a court of competent
+jurisdiction to be illegal or unenforceable, the validity or enforceability of
+the remainder of this Agreement shall not be affected if the illegal or
+unenforceable provision does not materially affect the intent of this
+Agreement.  If the illegal or unenforceable provision materially affects the
+intent of the parties to this Agreement, this Agreement shall become
+terminated.
+
+7.5.	Equitable Relief.  Licensee hereby acknowledges that its breach of this
+Agreement would cause irreparable harm and significant injury to Broadcom that
+may be difficult to ascertain and that a remedy at law would be inadequate.
+Accordingly, Licensee agrees that Broadcom shall have the right to seek and
+obtain immediate injunctive relief to enforce obligations under the Agreement
+in addition to any other rights and remedies it may have.
+
+7.6.	Waiver.  The waiver of, or failure to enforce, any breach or default
+hereunder shall not constitute the waiver of any other or subsequent breach or
+default.
+
+7.7.	Entire Agreement.  This Agreement sets forth the entire Agreement
+between the parties and supersedes any and all prior proposals, agreements and
+representations between them, whether written or oral concerning the Software.
+This Agreement may be changed only by mutual agreement of the parties in
+writing.
+

recipes-kernel/linux-firmware/linux-firmware/brcmfmac43430-sdio.txt

@@ -0,0 +1,66 @@
+# NVRAM file for BCM943430WLPTH
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0727
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0727
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=84
+txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x77711111
+propbw202gpo=0xdd
+
+# OFDM IIR :
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+# PAPD mode:
+papdmode=1
+papdvalidtest=1
+pacalidx2g=42
+papdepsoffset=-22
+papdendidx=58
+
+# LTECX flags
+ltecxmux=0
+ltecxpadnum=0x0102
+ltecxfnsel=0x44
+ltecxgcigpio=0x01
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
+muxenab=0x1
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+
+#VCO freq 326.4MHz
+spurconfig=0x3 
+
+edonthd20l=-75
+edoffthd20ul=-80

recipes-kernel/linux-firmware/linux-firmware_git.bbappend

@@ -0,0 +1,33 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+LICENSE_append = " & Firmware-broadcom_brcm80211"
+
+LIC_FILES_CHKSUM_append = " file://${WORKDIR}/LICENSE.broadcom_brcm80211;md5=8cba1397cda6386db37210439a0da3eb"
+
+NO_GENERIC_LICENSE[Firmware-broadcom_brcm80211] = "LICENSE.broadcom_brcm80211"
+
+SRC_URI_append = " \
+    file://brcmfmac43430-sdio.bin \
+    file://brcmfmac43430-sdio.txt \
+    file://LICENSE.broadcom_brcm80211 \
+    "
+
+do_install_append() {
+    cp ${WORKDIR}/brcmfmac43430-sdio.* ${D}/lib/firmware/brcm/
+    cp ${WORKDIR}/LICENSE.broadcom_brcm80211 ${D}/lib/firmware/
+}
+
+PACKAGES =+ "${PN}-brcm43430 ${PN}-brcm43430-license"
+
+LICENSE_${PN}-brcm43430 = "Firmware-broadcom_brcm80211"
+FILES_${PN}-brcm43430-license = "/lib/firmware/LICENSE.broadcom_brcm80211"
+FILES_${PN}-brcm43430 = " \
+    /lib/firmware/brcm/brcmfmac43430-sdio.bin \
+    /lib/firmware/brcm/brcmfmac43430-sdio.txt \
+    "
+
+RDEPENDS_${PN}-brcm43430 += "${PN}-brcm43430-license"
+
+ALTERNATIVE_LINK_NAME[brcmfmac-sdio.bin] = "/lib/firmware/brcm/brcmfmac-sdio.bin"
+ALTERNATIVE_TARGET_linux-firmware-brcm43430[brcmfmac-sdio.bin] = "/lib/firmware/brcm/brcmfmac43430-sdio.bin"
+ALTERNATIVE_linux-firmware-brcm43430 = "brcmfmac-sdio.bin"

recipes-kernel/linux-libc-headers/linux-libc-headers-raspberrypi_3.2.27.bb

@@ -1,12 +0,0 @@
-require recipes-kernel/linux-libc-headers/linux-libc-headers.inc
-
-PR = "r0"
-
-PROVIDES = "linux-libc-headers"
-RPROVIDES_${PN}-dev = "linux-libc-headers-dev"
-RPROVIDES_${PN}-dbg = "linux-libc-headers-dbg"
-
-SRCREV = "10182a3bc434b27740f81c2b836a1af943060241"
-SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27 \
-          "
-S = "${WORKDIR}/git"

recipes-kernel/linux/linux-raspberrypi-3.18/0001-dts-add-overlay-for-pitft22.patch

@@ -0,0 +1,110 @@
+From 2f44861e2a2d651a9aa62a75343a032fee33e93b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Petter=20Mab=C3=A4cker?= <petter@technux.se>
+Date: Fri, 8 Jan 2016 09:02:44 +0100
+Subject: [PATCH] dts: add overlay for pitft22 in linux 3.18
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Upstream-Status: Pending
+
+Add the pitft22 overlay from adafruit Adafruit-Pi-Kernel-o-Matic repo:
+https://github.com/adafruit/Adafruit-Pi-Kernel-o-Matic
+
+Signed-off-by: Petter Mabäcker <petter@technux.se>
+---
+ arch/arm/boot/dts/overlays/Makefile            |  1 +
+ arch/arm/boot/dts/overlays/pitft22-overlay.dts | 69 ++++++++++++++++++++++++++
+ 2 files changed, 70 insertions(+)
+ create mode 100755 arch/arm/boot/dts/overlays/pitft22-overlay.dts
+
+diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile
+index c766616..1eaaf81 100644
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -27,6 +27,7 @@ dtb-$(RPI_DT_OVERLAYS) += mcp2515-can0-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += mmc-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += mz61581-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += piscreen-overlay.dtb
++dtb-$(RPI_DT_OVERLAYS) += pitft22-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += pitft28-resistive-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += pps-gpio-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += rpi-dac-overlay.dtb
+diff --git a/arch/arm/boot/dts/overlays/pitft22-overlay.dts b/arch/arm/boot/dts/overlays/pitft22-overlay.dts
+new file mode 100755
+index 0000000..894ba22
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/pitft22-overlay.dts
+@@ -0,0 +1,69 @@
++/*
++ * Device Tree overlay for pitft by Adafruit
++ *
++ */
++
++/dts-v1/;
++/plugin/;
++
++/ {
++        compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
++
++        fragment@0 {
++                target = <&spi0>;
++                __overlay__ {
++                        status = "okay";
++
++                        spidev@0{
++                                status = "disabled";
++                        };
++
++                        spidev@1{
++                                status = "disabled";
++                        };
++                };
++        };
++
++        fragment@1 {
++                target = <&gpio>;
++                __overlay__ {
++                        pitft_pins: pitft_pins {
++                                brcm,pins = <25>;
++                                brcm,function = <1>; /* out */
++                                brcm,pull = <0>; /* none */
++                        };
++                };
++        };
++
++        fragment@2 {
++                target = <&spi0>;
++                __overlay__ {
++                        /* needed to avoid dtc warning */
++                        #address-cells = <1>;
++                        #size-cells = <0>;
++
++                        pitft: pitft@0{
++                                compatible = "ilitek,ili9340";
++                                reg = <0>;
++                                pinctrl-names = "default";
++                                pinctrl-0 = <&pitft_pins>;
++
++                                spi-max-frequency = <32000000>;
++                                rotate = <90>;
++                                fps = <25>;
++                                bgr;
++                                buswidth = <8>;
++                                dc-gpios = <&gpio 25 0>;
++                                debug = <0>;
++                        };
++
++                };
++        };
++
++        __overrides__ {
++                speed =   <&pitft>,"spi-max-frequency:0";
++                rotate =  <&pitft>,"rotate:0";
++                fps =     <&pitft>,"fps:0";
++                debug =   <&pitft>,"debug:0";
++        };
++};
+-- 
+1.9.1
+

recipes-kernel/linux/linux-raspberrypi-4.1/0001-dts-add-overlay-for-pitft22.patch

@@ -0,0 +1,110 @@
+From a28bd410022b32a64e208f04b45add6326990332 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Petter=20Mab=C3=A4cker?= <petter@technux.se>
+Date: Fri, 8 Jan 2016 09:02:44 +0100
+Subject: [PATCH] dts: add overlay for pitft22
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Upstream-Status: Pending
+
+Add the pitft22 overlay from adafruit Adafruit-Pi-Kernel-o-Matic repo:
+https://github.com/adafruit/Adafruit-Pi-Kernel-o-Matic
+
+Signed-off-by: Petter Mabäcker <petter@technux.se>
+---
+ arch/arm/boot/dts/overlays/Makefile            |  1 +
+ arch/arm/boot/dts/overlays/pitft22-overlay.dts | 69 ++++++++++++++++++++++++++
+ 2 files changed, 70 insertions(+)
+ create mode 100755 arch/arm/boot/dts/overlays/pitft22-overlay.dts
+
+diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile
+index 1a60e9c..a2535a2 100644
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -37,6 +37,7 @@ dtb-$(RPI_DT_OVERLAYS) += mmc-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += mz61581-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += piscreen-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += piscreen2r-overlay.dtb
++dtb-$(RPI_DT_OVERLAYS) += pitft22-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += pitft28-capacitive-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += pitft28-resistive-overlay.dtb
+ dtb-$(RPI_DT_OVERLAYS) += pps-gpio-overlay.dtb
+diff --git a/arch/arm/boot/dts/overlays/pitft22-overlay.dts b/arch/arm/boot/dts/overlays/pitft22-overlay.dts
+new file mode 100755
+index 0000000..894ba22
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/pitft22-overlay.dts
+@@ -0,0 +1,69 @@
++/*
++ * Device Tree overlay for pitft by Adafruit
++ *
++ */
++
++/dts-v1/;
++/plugin/;
++
++/ {
++        compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
++
++        fragment@0 {
++                target = <&spi0>;
++                __overlay__ {
++                        status = "okay";
++
++                        spidev@0{
++                                status = "disabled";
++                        };
++
++                        spidev@1{
++                                status = "disabled";
++                        };
++                };
++        };
++
++        fragment@1 {
++                target = <&gpio>;
++                __overlay__ {
++                        pitft_pins: pitft_pins {
++                                brcm,pins = <25>;
++                                brcm,function = <1>; /* out */
++                                brcm,pull = <0>; /* none */
++                        };
++                };
++        };
++
++        fragment@2 {
++                target = <&spi0>;
++                __overlay__ {
++                        /* needed to avoid dtc warning */
++                        #address-cells = <1>;
++                        #size-cells = <0>;
++
++                        pitft: pitft@0{
++                                compatible = "ilitek,ili9340";
++                                reg = <0>;
++                                pinctrl-names = "default";
++                                pinctrl-0 = <&pitft_pins>;
++
++                                spi-max-frequency = <32000000>;
++                                rotate = <90>;
++                                fps = <25>;
++                                bgr;
++                                buswidth = <8>;
++                                dc-gpios = <&gpio 25 0>;
++                                debug = <0>;
++                        };
++
++                };
++        };
++
++        __overrides__ {
++                speed =   <&pitft>,"spi-max-frequency:0";
++                rotate =  <&pitft>,"rotate:0";
++                fps =     <&pitft>,"fps:0";
++                debug =   <&pitft>,"debug:0";
++        };
++};
+-- 
+1.9.1
+

recipes-kernel/linux/linux-raspberrypi-4.1/0002-vmcs-Remove-unused-sm_cache_map_vector-definition.patch

@@ -0,0 +1,31 @@
+The code using it also ifdef'ed with 0, anyyd gcc 6
+complains
+
+error: 'sm_cache_map_vector' defined but not used
+
+The code using it also ifdef'ed out
+
+Upstream-status: Denied [https://github.com/raspberrypi/linux/pull/1528]
+
+Signed-off-by: Khem Raj <raj.khem@gmail.com>
+---
+ drivers/char/broadcom/vc_sm/vmcs_sm.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/char/broadcom/vc_sm/vmcs_sm.c
++++ b/drivers/char/broadcom/vc_sm/vmcs_sm.c
+@@ -197,12 +197,14 @@ struct SM_STATE_T {
+ static struct SM_STATE_T *sm_state;
+ static int sm_inited;
+ 
++#if 0
+ static const char *const sm_cache_map_vector[] = {
+ 	"(null)",
+ 	"host",
+ 	"videocore",
+ 	"host+videocore",
+ };
++#endif
+ 
+ /* ---- Private Function Prototypes -------------------------------------- */
+ 

recipes-kernel/linux/linux-raspberrypi-4.1/0003-fix-gcc6.patch

@@ -0,0 +1,78 @@
+Fix compile with GCC6
+
+Upstream-status: Denied [https://github.com/raspberrypi/linux/pull/1528]
+
+Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
+
+Index: source/include/linux/compiler-gcc6.h
+===================================================================
+--- /dev/null
++++ source/include/linux/compiler-gcc6.h
+@@ -0,0 +1,67 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used				__attribute__((__used__))
++#define __must_check			__attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++   to them will be unlikely.  This means a lot of manual unlikely()s
++   are unnecessary now for any paths leading to the usual suspects
++   like BUG(), printk(), panic() etc. [but let's keep them for now for
++   older compilers]
++
++   Early snapshots of gcc 4.3 don't support this and we can't detect this
++   in the preprocessor, but we can live with this because they're unreleased.
++   Maketime probing would be overkill here.
++
++   gcc also has a __attribute__((__hot__)) to move hot functions into
++   a special section, but I don't see any sense in this right now in
++   the kernel context */
++#define __cold			__attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable.  This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased.  Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone	__attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
++
++#define KASAN_ABI_VERSION 4

recipes-kernel/linux/linux-raspberrypi.inc

@@ -0,0 +1,69 @@
+require linux-rpi.inc
+inherit linux-raspberrypi-base
+
+DESCRIPTION = "Linux Kernel for Raspberry Pi"
+SECTION = "kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
+
+SRC_URI += " \
+        file://defconfig \
+        "
+
+COMPATIBLE_MACHINE = "raspberrypi"
+
+PE = "1"
+PV = "${LINUX_VERSION}+git${SRCPV}"
+
+# NOTE: For now we pull in the default config from the RPi kernel GIT tree.
+KERNEL_DEFCONFIG_raspberrypi ?= "bcmrpi_defconfig"
+KERNEL_DEFCONFIG_raspberrypi2 ?= "bcm2709_defconfig"
+
+# CMDLINE for raspberrypi
+CMDLINE = "dwc_otg.lpm_enable=0 console=serial0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
+
+# Add the kernel debugger over console kernel command line option if enabled
+CMDLINE_append = ' ${@base_conditional("ENABLE_KGDB", "1", "kgdboc=serial0,115200", "", d)}'
+
+UDEV_GE_141 ?= "1"
+
+KERNEL_MODULE_AUTOLOAD += "${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "stmpe-ts", "", d)}"
+
+# Set programmatically some variables during recipe parsing
+# See http://www.yoctoproject.org/docs/current/bitbake-user-manual/bitbake-user-manual.html#anonymous-python-functions
+python __anonymous () {
+    kerneltype = d.getVar('KERNEL_IMAGETYPE', True)
+    kerneldt = get_dts(d, d.getVar('LINUX_VERSION', True))
+    d.setVar("KERNEL_DEVICETREE", kerneldt)
+}
+
+do_kernel_configme_prepend() {
+    install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available."
+}
+
+do_install_prepend() {
+    install -d ${D}/lib/firmware
+}
+
+do_deploy_append() {
+    # Deploy cmdline.txt
+    install -d ${DEPLOYDIR}/bcm2835-bootfiles
+    PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
+    if [ ${PITFT} = "1" ]; then
+        PITFT_PARAMS="fbcon=map:10 fbcon=font:VGA8x8"
+    fi
+    echo "${CMDLINE}${PITFT_PARAMS}" > ${DEPLOYDIR}/bcm2835-bootfiles/cmdline.txt
+}
+
+do_bundle_initramfs_append() {
+    if [ ! -z "${INITRAMFS_IMAGE}" -a x"${INITRAMFS_IMAGE_BUNDLE}" = x1 ]; then
+        if test "x${KERNEL_IMAGETYPE}" != "xuImage" ; then
+            if test -n "${KERNEL_DEVICETREE}"; then
+                # Add RPi bootloader trailer to kernel image to enable DeviceTree support
+                for type in ${KERNEL_IMAGETYPES} ; do
+                    ${STAGING_BINDIR_NATIVE}/mkknlimg --dtok ${KERNEL_OUTPUT_DIR}/$type.initramfs ${KERNEL_OUTPUT_DIR}/$type.initramfs
+                done
+            fi
+        fi
+    fi
+}

recipes-kernel/linux/linux-raspberrypi/defconfig

@@ -0,0 +1 @@
+# Dummy file to get through do_kernel_configme.

recipes-kernel/linux/linux-raspberrypi_3.18.bb

@@ -0,0 +1,14 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
+
+LINUX_VERSION ?= "3.18.16"
+
+SRCREV = "1bb18c8f721ef674a447f3622273f2e2de7a205c"
+SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.18.y \
+           file://0001-dts-add-overlay-for-pitft22.patch \
+          "
+require linux-raspberrypi.inc
+
+# Create missing out of tree 'overlays' directory prior to install step
+do_compile_prepend() {
+  mkdir -p ${B}/arch/arm/boot/dts/overlays
+}

recipes-kernel/linux/linux-raspberrypi_3.2.27.bb

@@ -1,34 +0,0 @@
-require linux.inc
-
-DESCRIPTION = "Linux kernel for the RaspberryPi board"
-COMPATIBLE_MACHINE = "raspberrypi"
-
-PR = "r6"
-PV_append = "+git${SRCREV}"
-
-SRCREV = "10182a3bc434b27740f81c2b836a1af943060241"
-SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.2.27 \
-          "
-S = "${WORKDIR}/git"
-
-# NOTE: For now we pull in the default config from the RPi kernel GIT tree.
-KERNEL_DEFCONFIG = "bcmrpi_defconfig"
-
-# CMDLINE for raspberrypi
-CMDLINE_raspberrypi = "dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
-
-UDEV_GE_141 ?= "1"
-
-do_configure_prepend() {
-	install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available."
-}
-
-do_install_prepend() {
-	install -d ${D}/lib/firmware
-}
-
-do_deploy_append() {
-	# Deploy cmdline.txt
-	install -d ${DEPLOYDIR}/bcm2835-bootfiles
-	echo "${CMDLINE}" > ${DEPLOYDIR}/bcm2835-bootfiles/cmdline.txt
-}

recipes-kernel/linux/linux-raspberrypi_3.6.11.bb

@@ -1,34 +0,0 @@
-require linux.inc
-
-DESCRIPTION = "Linux kernel for the RaspberryPi board"
-COMPATIBLE_MACHINE = "raspberrypi"
-
-PR = "r6"
-PV_append = "+git${SRCREV}"
-
-SRCREV = "31a951046155b27361127d9cf85a1f58719fe9b3"
-SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-3.6.y \
-          "
-S = "${WORKDIR}/git"
-
-# NOTE: For now we pull in the default config from the RPi kernel GIT tree.
-KERNEL_DEFCONFIG = "bcmrpi_defconfig"
-
-# CMDLINE for raspberrypi
-CMDLINE_raspberrypi = "dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
-
-UDEV_GE_141 ?= "1"
-
-do_configure_prepend() {
-	install -m 0644 ${S}/arch/${ARCH}/configs/${KERNEL_DEFCONFIG} ${WORKDIR}/defconfig || die "No default configuration for ${MACHINE} / ${KERNEL_DEFCONFIG} available."
-}
-
-do_install_prepend() {
-	install -d ${D}/lib/firmware
-}
-
-do_deploy_append() {
-	# Deploy cmdline.txt
-	install -d ${DEPLOYDIR}/bcm2835-bootfiles
-	echo "${CMDLINE}" > ${DEPLOYDIR}/bcm2835-bootfiles/cmdline.txt
-}

recipes-kernel/linux/linux-raspberrypi_4.1.bb

@@ -0,0 +1,12 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
+
+LINUX_VERSION ?= "4.1.21"
+
+SRCREV = "ff45bc0e8917c77461b2901e2743e6339bb70413"
+SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.1.y \
+           file://0001-dts-add-overlay-for-pitft22.patch \
+           file://0002-vmcs-Remove-unused-sm_cache_map_vector-definition.patch \
+           file://0003-fix-gcc6.patch \
+          "
+
+require linux-raspberrypi.inc

recipes-kernel/linux/linux-raspberrypi_4.4.bb

@@ -0,0 +1,8 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
+
+LINUX_VERSION ?= "4.4.13"
+
+SRCREV = "680be5e27a9593cf26079c6e5744a04cc2809d13"
+SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=rpi-4.4.y \
+"
+require linux-raspberrypi.inc

recipes-kernel/linux/linux-rpi.inc

@@ -0,0 +1,138 @@
+DESCRIPTION = "Linux Kernel"
+SECTION = "kernel"
+LICENSE = "GPLv2"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
+
+inherit kernel siteinfo
+require recipes-kernel/linux/linux-yocto.inc
+
+# Enable OABI compat for people stuck with obsolete userspace
+ARM_KEEP_OABI ?= "1"
+
+# Quirk for udev greater or equal 141
+UDEV_GE_141 ?= "1"
+
+# Set the verbosity of kernel messages during runtime
+# You can define CMDLINE_DEBUG in your local.conf or distro.conf to override this behaviour
+CMDLINE_DEBUG ?= '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug", d)}'
+CMDLINE_append = " ${CMDLINE_DEBUG}"
+
+KERNEL_INITRAMFS ?= '${@base_conditional("INITRAMFS_IMAGE_BUNDLE", "1", "1", "", d)}'
+
+# Set a variable in .configure
+# $1 - Configure variable to be set
+# $2 - value [n/y/value]
+kernel_configure_variable() {
+    # Remove the config
+    CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;"
+    if test "$2" = "n"
+    then
+        echo "# CONFIG_$1 is not set" >> ${B}/.config
+    else
+        echo "CONFIG_$1=$2" >> ${B}/.config
+    fi
+}
+
+do_configure_prepend() {
+    # Clean .config
+    echo "" > ${B}/.config
+    CONF_SED_SCRIPT=""
+
+    # oabi / eabi support
+    kernel_configure_variable AEABI y
+    if [ "${ARM_KEEP_OABI}" = "1" ] ; then
+        kernel_configure_variable OABI_COMPAT y
+    else
+        kernel_configure_variable OABI_COMPAT n
+    fi
+
+    # Set cmdline
+    kernel_configure_variable CMDLINE "\"${CMDLINE}\""
+
+    # Localversion
+    kernel_configure_variable LOCALVERSION "\"\""
+    kernel_configure_variable LOCALVERSION_AUTO n
+
+    # Udev quirks
+    # Newer versions of udev mandate that sysfs doesn't have deprecated entries
+    if [ "${UDEV_GE_141}" = "1" ] ; then
+        kernel_configure_variable SYSFS_DEPRECATED n
+        kernel_configure_variable SYSFS_DEPRECATED_V2 n
+        kernel_configure_variable HOTPLUG y
+        kernel_configure_variable UEVENT_HELPER_PATH "\"\""
+        kernel_configure_variable UNIX y
+        kernel_configure_variable SYSFS y
+        kernel_configure_variable PROC_FS y
+        kernel_configure_variable TMPFS y
+        kernel_configure_variable INOTIFY_USER y
+        kernel_configure_variable SIGNALFD y
+        kernel_configure_variable TMPFS_POSIX_ACL y
+        kernel_configure_variable BLK_DEV_BSG y
+        kernel_configure_variable DEVTMPFS y
+        kernel_configure_variable DEVTMPFS_MOUNT y
+    fi
+
+    # Newer inits like systemd need cgroup support
+    if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then
+        kernel_configure_variable CGROUP_SCHED y
+        kernel_configure_variable CGROUPS y
+        kernel_configure_variable CGROUP_NS y
+        kernel_configure_variable CGROUP_FREEZER y
+        kernel_configure_variable CGROUP_DEVICE y
+        kernel_configure_variable CPUSETS y
+        kernel_configure_variable PROC_PID_CPUSET y
+        kernel_configure_variable CGROUP_CPUACCT y
+        kernel_configure_variable RESOURCE_COUNTERS y
+    fi
+
+    # root-over-nfs-over-usb-eth support. Limited, but should cover some cases
+    # Enable this by setting a proper CMDLINE_NFSROOT_USB.
+    if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
+        oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
+        kernel_configure_variable INET y
+        kernel_configure_variable IP_PNP y
+        kernel_configure_variable USB_GADGET y
+        kernel_configure_variable USB_GADGET_SELECTED y
+        kernel_configure_variable USB_ETH y
+        kernel_configure_variable NFS_FS y
+        kernel_configure_variable ROOT_NFS y
+        kernel_configure_variable ROOT_NFS y
+        kernel_configure_variable CMDLINE "\"${CMDLINE_NFSROOT_USB}\""
+    fi
+    if [ ! -z "${KERNEL_INITRAMFS}" ]; then
+        kernel_configure_variable BLK_DEV_INITRD y
+        kernel_configure_variable INITRAMFS_SOURCE ""
+        kernel_configure_variable RD_GZIP y
+        kernel_configure_variable OVERLAY_FS y
+        kernel_configure_variable SQUASHFS y
+        kernel_configure_variable UBIFS_FS y
+    fi
+    # Activate CONFIG_LEGACY_PTYS
+    kernel_configure_variable LEGACY_PTYS y
+
+    # Keep this the last line
+    # Remove all modified configs and add the rest to .config
+    sed -e "${CONF_SED_SCRIPT}" < '${WORKDIR}/defconfig' >> '${B}/.config'
+
+    yes '' | oe_runmake oldconfig
+}
+
+# Automatically depend on lzop-native if CONFIG_KERNEL_LZO is enabled
+python () {
+    try:
+        defconfig = bb.fetch2.localpath('file://defconfig', d)
+    except bb.fetch2.FetchError:
+        return
+
+    try:
+        configfile = open(defconfig)
+    except IOError:
+        return
+
+    if 'CONFIG_KERNEL_LZO=y\n' in configfile.readlines():
+        depends = d.getVar('DEPENDS', False)
+        d.setVar('DEPENDS', depends + ' lzop-native')
+
+    configfile.close()
+}

recipes-kernel/linux/linux.inc

@@ -1,131 +0,0 @@
-DESCRIPTION = "Linux Kernel"
-SECTION = "kernel"
-LICENSE = "GPLv2"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
-
-inherit kernel siteinfo
-
-# Enable OABI compat for people stuck with obsolete userspace
-ARM_KEEP_OABI ?= "1"
-
-# Quirk for udev greater or equal 141
-UDEV_GE_141 ?= "1"
-
-# Set the verbosity of kernel messages during runtime
-# You can define CMDLINE_DEBUG in your local.conf or distro.conf to override this behaviour
-CMDLINE_DEBUG ?= '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug", d)}'
-CMDLINE_append = " ${CMDLINE_DEBUG}"
-
-# Set a variable in .configure
-# $1 - Configure variable to be set
-# $2 - value [n/y/value]
-kernel_configure_variable() {
-	# Remove the config
-	CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;"
-	if test "$2" = "n"
-	then
-		echo "# CONFIG_$1 is not set" >> ${S}/.config
-	else
-		echo "CONFIG_$1=$2" >> ${S}/.config
-	fi
-}
-
-do_configure_prepend() {
-	# Clean .config
-	echo "" > ${S}/.config
-	CONF_SED_SCRIPT=""
-
-	# oabi / eabi support
-	if [ "${TARGET_OS}" = "linux-gnueabi" -o  "${TARGET_OS}" = "linux-uclibceabi" ]; then
-		kernel_configure_variable AEABI y
-		if [ "${ARM_KEEP_OABI}" = "1" ] ; then
-			kernel_configure_variable OABI_COMPAT y
-		else
-			kernel_configure_variable OABI_COMPAT n
-		fi
-	else
-		kernel_configure_variable AEABI n
-		kernel_configure_variable OABI_COMPAT n
-	fi
-
-	# Set cmdline
-	kernel_configure_variable CMDLINE "\"${CMDLINE}\""
-
-	# Localversion
-	kernel_configure_variable LOCALVERSION "\"\""
-	kernel_configure_variable LOCALVERSION_AUTO n
-
-	# Udev quirks
-	# Newer versions of udev mandate that sysfs doesn't have deprecated entries
-	if [ "${UDEV_GE_141}" = "1" ] ; then
-		kernel_configure_variable SYSFS_DEPRECATED n
-		kernel_configure_variable SYSFS_DEPRECATED_V2 n
-		kernel_configure_variable HOTPLUG y
-		kernel_configure_variable UEVENT_HELPER_PATH "\"\""
-		kernel_configure_variable UNIX y
-		kernel_configure_variable SYSFS y
-		kernel_configure_variable PROC_FS y
-		kernel_configure_variable TMPFS y
-		kernel_configure_variable INOTIFY_USER y
-		kernel_configure_variable SIGNALFD y
-		kernel_configure_variable TMPFS_POSIX_ACL y
-		kernel_configure_variable BLK_DEV_BSG y
-		kernel_configure_variable DEVTMPFS y
-		kernel_configure_variable DEVTMPFS_MOUNT y
-	fi
-
-	# Newer inits like systemd need cgroup support
-	if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then
-		kernel_configure_variable CGROUP_SCHED y
-		kernel_configure_variable CGROUPS y
-		kernel_configure_variable CGROUP_NS y
-		kernel_configure_variable CGROUP_FREEZER y
-		kernel_configure_variable CGROUP_DEVICE y
-		kernel_configure_variable CPUSETS y
-		kernel_configure_variable PROC_PID_CPUSET y
-		kernel_configure_variable CGROUP_CPUACCT y
-		kernel_configure_variable RESOURCE_COUNTERS y
-	fi
-
-	# root-over-nfs-over-usb-eth support. Limited, but should cover some cases
-	# Enable this by setting a proper CMDLINE_NFSROOT_USB.
-	if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
-		oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
-		kernel_configure_variable INET y
-		kernel_configure_variable IP_PNP y
-		kernel_configure_variable USB_GADGET y
-		kernel_configure_variable USB_GADGET_SELECTED y
-		kernel_configure_variable USB_ETH y
-		kernel_configure_variable NFS_FS y
-		kernel_configure_variable ROOT_NFS y
-		kernel_configure_variable ROOT_NFS y
-		kernel_configure_variable CMDLINE "\"${CMDLINE_NFSROOT_USB}\""
-	fi
-
-	# Activate CONFIG_LEGACY_PTYS
-	kernel_configure_variable LEGACY_PTYS y
-
-	# Keep this the last line
-	# Remove all modified configs and add the rest to .config
-	sed -e "${CONF_SED_SCRIPT}" < '${WORKDIR}/defconfig' >> '${S}/.config'
-
-	yes '' | oe_runmake oldconfig
-}
-
-# Automatically depend on lzop-native if CONFIG_KERNEL_LZO is enabled
-python () {
-    try:
-        defconfig = bb.fetch2.localpath('file://defconfig', d)
-    except bb.fetch2.FetchError:
-        return
-
-    try:
-        configfile = open(defconfig)
-    except IOError:
-        return
-
-    if 'CONFIG_KERNEL_LZO=y\n' in configfile.readlines():
-        depends = d.getVar('DEPENDS', False)
-        d.setVar('DEPENDS', depends + ' lzop-native')
-}