Go to file
James Hughes 8b28006c3d Fixed up initial timelapse delay
When in timelapse mode, the delay before the first shot
was the timelapse value. However, if a low value is set
this does not give enough time for the AE etc to settle.

In addition, the first image was only taken after the
first delay, rather than immediately which is what would
be expected. So a 5minute timelapse delay meant the 1st
image was only taken after 5 minutes.

The patch sets the delay for the first image capture to
be a constant value, 1000ms. So always time for the AE etc
to settle.

Fixes: #429, #473
2018-07-18 16:12:10 +01:00
2017-09-08 18:29:52 +01:00
2017-04-05 14:30:10 +01:00
2017-02-08 19:26:09 +00:00
2016-02-01 21:07:02 +00:00
2017-12-05 12:44:02 +00:00

This repository contains the source code for the ARM side libraries used on Raspberry Pi. These typically are installed in /opt/vc/lib and includes source for the ARM side code to interface to: EGL, mmal, GLESv2, vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG.

Use buildme to build. It requires cmake to be installed and an arm cross compiler. It is set up to use this one: https://github.com/raspberrypi/tools/tree/master/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian

Note that this repository does not contain the source for the edid_parser and vcdbg binaries due to licensing restrictions.

Description
No description provided
Readme 46 MiB
Languages
C 95.1%
C++ 1.5%
OpenQASM 1.3%
Roff 1.2%
CMake 0.7%