serial: Take care starting a hung-up tty's port

tty_port_hangup sets a port's tty field to NULL (holding the port lock),
but uart_tx_stopped, called from __uart_start (with the port lock),
uses the tty field without checking for NULL.

Change uart_tx_stopped to treat a NULL tty field as another stopped
indication.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

Documentation/ABI/stable/sysfs-driver-w1_ds28ea00

@@ -0,0 +1,6 @@
+What:		/sys/bus/w1/devices/.../w1_seq
+Date:		Apr 2015
+Contact:	Matt Campbell <mattrcampbell@gmail.com>
+Description:	Support for the DS28EA00 chain sequence function
+		see Documentation/w1/slaves/w1_therm for detailed information
+Users:		any user space application which wants to communicate with DS28EA00

Documentation/ABI/testing/configfs-usb-gadget-loopback

@@ -5,4 +5,4 @@ Description:
 		The attributes:
 
 		qlen		- depth of loopback queue
-		bulk_buflen	- buffer length
+		buflen		- buffer length

Documentation/ABI/testing/configfs-usb-gadget-sourcesink

@@ -9,4 +9,4 @@ Description:
 		isoc_maxpacket	- 0 - 1023 (fs), 0 - 1024 (hs/ss)
 		isoc_mult	- 0..2 (hs/ss only)
 		isoc_maxburst	- 0..15 (ss only)
-		qlen		- buffer length
+		buflen		- buffer length

Documentation/ABI/testing/ima_policy

@@ -20,17 +20,19 @@ Description:
 		action: measure | dont_measure | appraise | dont_appraise | audit
 		condition:= base | lsm  [option]
 			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
-				 [fowner]]
+				[euid=] [fowner=]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 			option:	[[appraise_type=]] [permit_directio]
 
 		base: 	func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK]
 				[FIRMWARE_CHECK]
-			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
+			mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
+			       [[^]MAY_EXEC]
 			fsmagic:= hex value
 			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
 			uid:= decimal value
+			euid:= decimal value
 			fowner:=decimal value
 		lsm:  	are LSM specific
 		option:	appraise_type:= [imasig]
@@ -49,11 +51,25 @@ Description:
 			dont_measure fsmagic=0x01021994
 			dont_appraise fsmagic=0x01021994
 			# RAMFS_MAGIC
-			dont_measure fsmagic=0x858458f6
 			dont_appraise fsmagic=0x858458f6
+			# DEVPTS_SUPER_MAGIC
+			dont_measure fsmagic=0x1cd1
+			dont_appraise fsmagic=0x1cd1
+			# BINFMTFS_MAGIC
+			dont_measure fsmagic=0x42494e4d
+			dont_appraise fsmagic=0x42494e4d
 			# SECURITYFS_MAGIC
 			dont_measure fsmagic=0x73636673
 			dont_appraise fsmagic=0x73636673
+			# SELINUX_MAGIC
+			dont_measure fsmagic=0xf97cff8c
+			dont_appraise fsmagic=0xf97cff8c
+			# CGROUP_SUPER_MAGIC
+			dont_measure fsmagic=0x27e0eb
+			dont_appraise fsmagic=0x27e0eb
+			# NSFS_MAGIC
+			dont_measure fsmagic=0x6e736673
+			dont_appraise fsmagic=0x6e736673
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
@@ -70,10 +86,6 @@ Description:
 		Examples of LSM specific definitions:
 
 		SELinux:
-			# SELINUX_MAGIC
-			dont_measure fsmagic=0xf97cff8c
-			dont_appraise fsmagic=0xf97cff8c
-
 			dont_measure obj_type=var_log_t
 			dont_appraise obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t

Documentation/ABI/testing/sysfs-ata

@@ -90,6 +90,17 @@ gscr
 	130:	SATA_PMP_GSCR_SII_GPIO
 	Only valid if the device is a PM.
 
+trim
+
+	Shows the DSM TRIM mode currently used by the device. Valid
+	values are:
+	unsupported:		Drive does not support DSM TRIM
+	unqueued:		Drive supports unqueued DSM TRIM only
+	queued:			Drive supports queued DSM TRIM
+	forced_unqueued:	Drive's unqueued DSM support is known to be
+				buggy and only unqueued TRIM commands
+				are sent
+
 spdn_cnt
 
 	Number of time libata decided to lower the speed of link due to errors.

Documentation/ABI/testing/sysfs-bus-iio

@@ -1165,10 +1165,8 @@ Description:
 		object is near the sensor, usually be observing
 		reflectivity of infrared or ultrasound emitted.
 		Often these sensors are unit less and as such conversion
-		to SI units is not possible.  Where it is, the units should
+		to SI units is not possible. Higher proximity measurements
-		be meters.  If such a conversion is not possible, the reported
+		indicate closer objects, and vice versa.
-		values should behave in the same way as a distance, i.e. lower
-		values indicate something is closer to the sensor.
 
 What:		/sys/.../iio:deviceX/in_illuminance_input
 What:		/sys/.../iio:deviceX/in_illuminance_raw

Documentation/DMA-API-HOWTO.txt

@@ -25,13 +25,18 @@ physical addresses.  These are the addresses in /proc/iomem.  The physical
 address is not directly useful to a driver; it must use ioremap() to map
 the space and produce a virtual address.
 
-I/O devices use a third kind of address: a "bus address" or "DMA address".
+I/O devices use a third kind of address: a "bus address".  If a device has
-If a device has registers at an MMIO address, or if it performs DMA to read
+registers at an MMIO address, or if it performs DMA to read or write system
-or write system memory, the addresses used by the device are bus addresses.
+memory, the addresses used by the device are bus addresses.  In some
-In some systems, bus addresses are identical to CPU physical addresses, but
+systems, bus addresses are identical to CPU physical addresses, but in
-in general they are not.  IOMMUs and host bridges can produce arbitrary
+general they are not.  IOMMUs and host bridges can produce arbitrary
 mappings between physical and bus addresses.
 
+From a device's point of view, DMA uses the bus address space, but it may
+be restricted to a subset of that space.  For example, even if a system
+supports 64-bit addresses for main memory and PCI BARs, it may use an IOMMU
+so devices only need to use 32-bit DMA addresses.
+
 Here's a picture and some examples:
 
                CPU                  CPU                  Bus
@@ -72,11 +77,11 @@ can use virtual address X to access the buffer, but the device itself
 cannot because DMA doesn't go through the CPU virtual memory system.
 
 In some simple systems, the device can do DMA directly to physical address
-Y.  But in many others, there is IOMMU hardware that translates bus
+Y.  But in many others, there is IOMMU hardware that translates DMA
 addresses to physical addresses, e.g., it translates Z to Y.  This is part
 of the reason for the DMA API: the driver can give a virtual address X to
 an interface like dma_map_single(), which sets up any required IOMMU
-mapping and returns the bus address Z.  The driver then tells the device to
+mapping and returns the DMA address Z.  The driver then tells the device to
 do DMA to Z, and the IOMMU maps it to the buffer at address Y in system
 RAM.
 
@@ -98,7 +103,7 @@ First of all, you should make sure
 #include <linux/dma-mapping.h>
 
 is in your driver, which provides the definition of dma_addr_t.  This type
-can hold any valid DMA or bus address for the platform and should be used
+can hold any valid DMA address for the platform and should be used
 everywhere you hold a DMA address returned from the DMA mapping functions.
 
 			 What memory is DMA'able?
@@ -316,7 +321,7 @@ There are two types of DMA mappings:
   Think of "consistent" as "synchronous" or "coherent".
 
   The current default is to return consistent memory in the low 32
-  bits of the bus space.  However, for future compatibility you should
+  bits of the DMA space.  However, for future compatibility you should
   set the consistent mask even if this default is fine for your
   driver.
 
@@ -403,7 +408,7 @@ dma_alloc_coherent() returns two values: the virtual address which you
 can use to access it from the CPU and dma_handle which you pass to the
 card.
 
-The CPU virtual address and the DMA bus address are both
+The CPU virtual address and the DMA address are both
 guaranteed to be aligned to the smallest PAGE_SIZE order which
 is greater than or equal to the requested size.  This invariant
 exists (for example) to guarantee that if you allocate a chunk
@@ -645,8 +650,8 @@ PLEASE NOTE:  The 'nents' argument to the dma_unmap_sg call must be
               dma_map_sg call.
 
 Every dma_map_{single,sg}() call should have its dma_unmap_{single,sg}()
-counterpart, because the bus address space is a shared resource and
+counterpart, because the DMA address space is a shared resource and
-you could render the machine unusable by consuming all bus addresses.
+you could render the machine unusable by consuming all DMA addresses.
 
 If you need to use the same streaming DMA region multiple times and touch
 the data in between the DMA transfers, the buffer needs to be synced

Documentation/DMA-API.txt

@@ -18,10 +18,10 @@ Part I - dma_ API
 To get the dma_ API, you must #include <linux/dma-mapping.h>.  This
 provides dma_addr_t and the interfaces described below.
 
-A dma_addr_t can hold any valid DMA or bus address for the platform.  It
+A dma_addr_t can hold any valid DMA address for the platform.  It can be
-can be given to a device to use as a DMA source or target.  A CPU cannot
+given to a device to use as a DMA source or target.  A CPU cannot reference
-reference a dma_addr_t directly because there may be translation between
+a dma_addr_t directly because there may be translation between its physical
-its physical address space and the bus address space.
+address space and the DMA address space.
 
 Part Ia - Using large DMA-coherent buffers
 ------------------------------------------
@@ -42,7 +42,7 @@ It returns a pointer to the allocated region (in the processor's virtual
 address space) or NULL if the allocation failed.
 
 It also returns a <dma_handle> which may be cast to an unsigned integer the
-same width as the bus and given to the device as the bus address base of
+same width as the bus and given to the device as the DMA address base of
 the region.
 
 Note: consistent memory can be expensive on some platforms, and the
@@ -193,7 +193,7 @@ dma_map_single(struct device *dev, void *cpu_addr, size_t size,
 		      enum dma_data_direction direction)
 
 Maps a piece of processor virtual memory so it can be accessed by the
-device and returns the bus address of the memory.
+device and returns the DMA address of the memory.
 
 The direction for both APIs may be converted freely by casting.
 However the dma_ API uses a strongly typed enumerator for its
@@ -212,20 +212,20 @@ contiguous piece of memory.  For this reason, memory to be mapped by
 this API should be obtained from sources which guarantee it to be
 physically contiguous (like kmalloc).
 
-Further, the bus address of the memory must be within the
+Further, the DMA address of the memory must be within the
 dma_mask of the device (the dma_mask is a bit mask of the
-addressable region for the device, i.e., if the bus address of
+addressable region for the device, i.e., if the DMA address of
-the memory ANDed with the dma_mask is still equal to the bus
+the memory ANDed with the dma_mask is still equal to the DMA
 address, then the device can perform DMA to the memory).  To
 ensure that the memory allocated by kmalloc is within the dma_mask,
 the driver may specify various platform-dependent flags to restrict
-the bus address range of the allocation (e.g., on x86, GFP_DMA
+the DMA address range of the allocation (e.g., on x86, GFP_DMA
-guarantees to be within the first 16MB of available bus addresses,
+guarantees to be within the first 16MB of available DMA addresses,
 as required by ISA devices).
 
 Note also that the above constraints on physical contiguity and
 dma_mask may not apply if the platform has an IOMMU (a device which
-maps an I/O bus address to a physical memory address).  However, to be
+maps an I/O DMA address to a physical memory address).  However, to be
 portable, device driver writers may *not* assume that such an IOMMU
 exists.
 
@@ -296,7 +296,7 @@ reduce current DMA mapping usage or delay and try again later).
 	dma_map_sg(struct device *dev, struct scatterlist *sg,
 		int nents, enum dma_data_direction direction)
 
-Returns: the number of bus address segments mapped (this may be shorter
+Returns: the number of DMA address segments mapped (this may be shorter
 than <nents> passed in if some elements of the scatter/gather list are
 physically or virtually adjacent and an IOMMU maps them with a single
 entry).
@@ -340,7 +340,7 @@ must be the same as those and passed in to the scatter/gather mapping
 API.
 
 Note: <nents> must be the number you passed in, *not* the number of
-bus address entries returned.
+DMA address entries returned.
 
 void
 dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
@@ -507,7 +507,7 @@ it's asked for coherent memory for this device.
 phys_addr is the CPU physical address to which the memory is currently
 assigned (this will be ioremapped so the CPU can access the region).
 
-device_addr is the bus address the device needs to be programmed
+device_addr is the DMA address the device needs to be programmed
 with to actually address this memory (this will be handed out as the
 dma_addr_t in dma_alloc_coherent()).
 

Documentation/HOWTO

@@ -218,16 +218,16 @@ The development process
 Linux kernel development process currently consists of a few different
 main kernel "branches" and lots of different subsystem-specific kernel
 branches.  These different branches are:
-  - main 3.x kernel tree
+  - main 4.x kernel tree
-  - 3.x.y -stable kernel tree
+  - 4.x.y -stable kernel tree
-  - 3.x -git kernel patches
+  - 4.x -git kernel patches
   - subsystem specific kernel trees and patches
-  - the 3.x -next kernel tree for integration tests
+  - the 4.x -next kernel tree for integration tests
 
-3.x kernel tree
+4.x kernel tree
 -----------------
-3.x kernels are maintained by Linus Torvalds, and can be found on
+4.x kernels are maintained by Linus Torvalds, and can be found on
-kernel.org in the pub/linux/kernel/v3.x/ directory.  Its development
+kernel.org in the pub/linux/kernel/v4.x/ directory.  Its development
 process is as follows:
   - As soon as a new kernel is released a two weeks window is open,
     during this period of time maintainers can submit big diffs to
@@ -262,20 +262,20 @@ mailing list about kernel releases:
 	released according to perceived bug status, not according to a
 	preconceived timeline."
 
-3.x.y -stable kernel tree
+4.x.y -stable kernel tree
 ---------------------------
 Kernels with 3-part versions are -stable kernels. They contain
 relatively small and critical fixes for security problems or significant
-regressions discovered in a given 3.x kernel.
+regressions discovered in a given 4.x kernel.
 
 This is the recommended branch for users who want the most recent stable
 kernel and are not interested in helping test development/experimental
 versions.
 
-If no 3.x.y kernel is available, then the highest numbered 3.x
+If no 4.x.y kernel is available, then the highest numbered 4.x
 kernel is the current stable kernel.
 
-3.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+4.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
 are released as needs dictate.  The normal release period is approximately
 two weeks, but it can be longer if there are no pressing problems.  A
 security-related problem, instead, can cause a release to happen almost
@@ -285,7 +285,7 @@ The file Documentation/stable_kernel_rules.txt in the kernel tree
 documents what kinds of changes are acceptable for the -stable tree, and
 how the release process works.
 
-3.x -git patches
+4.x -git patches
 ------------------
 These are daily snapshots of Linus' kernel tree which are managed in a
 git repository (hence the name.) These patches are usually released
@@ -317,9 +317,9 @@ revisions to it, and maintainers can mark patches as under review,
 accepted, or rejected.  Most of these patchwork sites are listed at
 http://patchwork.kernel.org/.
 
-3.x -next kernel tree for integration tests
+4.x -next kernel tree for integration tests
 ---------------------------------------------
-Before updates from subsystem trees are merged into the mainline 3.x
+Before updates from subsystem trees are merged into the mainline 4.x
 tree, they need to be integration-tested.  For this purpose, a special
 testing repository exists into which virtually all subsystem trees are
 pulled on an almost daily basis:

Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt

@@ -0,0 +1,45 @@
+Broadcom BCM2835 CPRMAN clocks
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CPRMAN clock controller generates clocks in the audio power domain
+of the BCM2835.  There is a level of PLLs deriving from an external
+oscillator, a level of PLL dividers that produce channels off of the
+few PLLs, and a level of mostly-generic clock generators sourcing from
+the PLL channels.  Most other hardware components source from the
+clock generators, but a few (like the ARM or HDMI) will source from
+the PLL dividers directly.
+
+Required properties:
+- compatible:	Should be "brcm,bcm2835-cprman"
+- #clock-cells:	Should be <1>. The permitted clock-specifier values can be
+		  found in include/dt-bindings/clock/bcm2835.h
+- reg:		Specifies base physical address and size of the registers
+- clocks:	The external oscillator clock phandle
+
+Example:
+
+	clk_osc: clock@3 {
+		compatible = "fixed-clock";
+		reg = <3>;
+		#clock-cells = <0>;
+		clock-output-names = "osc";
+		clock-frequency = <19200000>;
+	};
+
+	clocks: cprman@7e101000 {
+		compatible = "brcm,bcm2835-cprman";
+		#clock-cells = <1>;
+		reg = <0x7e101000 0x2000>;
+		clocks = <&clk_osc>;
+	};
+
+	i2c0: i2c@7e205000 {
+		compatible = "brcm,bcm2835-i2c";
+		reg = <0x7e205000 0x1000>;
+		interrupts = <2 21>;
+		clocks = <&clocks BCM2835_CLOCK_VPU>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};

Documentation/devicetree/bindings/clock/keystone-pll.txt

@@ -15,8 +15,8 @@ Required properties:
 - compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
 - clocks : parent clock phandle
 - reg - pll control0 and pll multipler registers
-- reg-names : control and multiplier. The multiplier is applicable only for
+- reg-names : control, multiplier and post-divider. The multiplier and
-		main pll clock
+		post-divider registers are applicable only for main pll clock
 - fixed-postdiv : fixed post divider value. If absent, use clkod register bits
 		for postdiv
 
@@ -25,8 +25,8 @@ Example:
 		#clock-cells = <0>;
 		compatible = "ti,keystone,main-pll-clock";
 		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
-		reg-names = "control", "multiplier";
+		reg-names = "control", "multiplier", "post-divider";
 		fixed-postdiv = <2>;
 	};
 

Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt

@@ -48,8 +48,8 @@ Example:
 
 bcm2835_i2s: i2s@7e203000 {
 	compatible = "brcm,bcm2835-i2s";
-	reg = <	0x7e203000 0x20>,
+	reg = <	0x7e203000 0x24>,
-	      < 0x7e101098 0x02>;
+	      < 0x7e101098 0x08>;
 
 	dmas = <&dma 2>,
 	       <&dma 3>;

Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt

@@ -0,0 +1,35 @@
+* FocalTech FT6236 I2C touchscreen controller
+
+Required properties:
+ - compatible		  : "focaltech,ft6236"
+ - reg			  : I2C slave address of the chip (0x38)
+ - interrupt-parent	  : a phandle pointing to the interrupt controller
+			    serving the interrupt for this chip
+ - interrupts		  : interrupt specification for the touch controller
+			    interrupt
+ - reset-gpios		  : GPIO specification for the RSTN input
+ - touchscreen-size-x	  : horizontal resolution of touchscreen (in pixels)
+ - touchscreen-size-y	  : vertical resolution of touchscreen (in pixels)
+
+Optional properties:
+ - touchscreen-fuzz-x	  : horizontal noise value of the absolute input
+			    device (in pixels)
+ - touchscreen-fuzz-y	  : vertical noise value of the absolute input
+			    device (in pixels)
+ - touchscreen-inverted-x : X axis is inverted (boolean)
+ - touchscreen-inverted-y : Y axis is inverted (boolean)
+ - touchscreen-swapped-x-y: X and Y axis are swapped (boolean)
+			    Swapping is done after inverting the axis
+
+Example:
+
+	ft6x06@38 {
+		compatible = "focaltech,ft6236";
+		reg = <0x38>;
+		interrupt-parent = <&gpio>;
+		interrupts = <23 2>;
+		touchscreen-size-x = <320>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+	};

Documentation/devicetree/bindings/mfd/mfd.txt

@@ -0,0 +1,41 @@
+Multi-Function Devices (MFD)
+
+These devices comprise a nexus for heterogeneous hardware blocks containing
+more than one non-unique yet varying hardware functionality.
+
+A typical MFD can be:
+
+- A mixed signal ASIC on an external bus, sometimes a PMIC (Power Management
+  Integrated Circuit) that is manufactured in a lower technology node (rough
+  silicon) that handles analog drivers for things like audio amplifiers, LED
+  drivers, level shifters, PHY (physical interfaces to things like USB or
+  ethernet), regulators etc.
+
+- A range of memory registers containing "miscellaneous system registers" also
+  known as a system controller "syscon" or any other memory range containing a
+  mix of unrelated hardware devices.
+
+Optional properties:
+
+- compatible : "simple-mfd" - this signifies that the operating system should
+  consider all subnodes of the MFD device as separate devices akin to how
+  "simple-bus" inidicates when to see subnodes as children for a simple
+  memory-mapped bus. For more complex devices, when the nexus driver has to
+  probe registers to figure out what child devices exist etc, this should not
+  be used. In the latter case the child devices will be determined by the
+  operating system.
+
+Example:
+
+foo@1000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x01000 0x1000>;
+
+	led@08.0 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x01>;
+		label = "myled";
+		default-state = "on";
+	};
+};

Documentation/devicetree/bindings/misc/brcm,bcm2835-smi-dev.txt

@@ -0,0 +1,17 @@
+* Broadcom BCM2835 SMI character device driver.
+
+SMI or secondary memory interface is a peripheral specific to certain Broadcom
+SOCs, and is helpful for talking to things like parallel-interface displays
+and NAND flashes (in fact, most things with a parallel register interface).
+
+This driver adds a character device which provides a user-space interface to
+an instance of the SMI driver.
+
+Required properties:
+- compatible: "brcm,bcm2835-smi-dev"
+- smi_handle: a phandle to the smi node.
+
+Optional properties:
+- None.
+
+

Documentation/devicetree/bindings/misc/brcm,bcm2835-smi.txt

@@ -0,0 +1,48 @@
+* Broadcom BCM2835 SMI driver.
+
+SMI or secondary memory interface is a peripheral specific to certain Broadcom
+SOCs, and is helpful for talking to things like parallel-interface displays
+and NAND flashes (in fact, most things with a parallel register interface).
+
+Required properties:
+- compatible: "brcm,bcm2835-smi"
+- reg: Should contain location and length of SMI registers and SMI clkman regs
+- interrupts: *the* SMI interrupt.
+- pinctrl-names: should be "default".
+- pinctrl-0: the phandle of the gpio pin node.
+- brcm,smi-clock-source: the clock source for clkman
+- brcm,smi-clock-divisor: the integer clock divisor for clkman
+- dmas: the dma controller phandle and the DREQ number (4 on a 2835)
+- dma-names: the name used by the driver to request its channel.
+  Should be "rx-tx".
+
+Optional properties:
+- None.
+
+Examples:
+
+8 data pin configuration:
+
+smi: smi@7e600000 {
+	compatible = "brcm,bcm2835-smi";
+	reg = <0x7e600000 0x44>, <0x7e1010b0 0x8>;
+	interrupts = <2 16>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+	brcm,smi-clock-source = <6>;
+	brcm,smi-clock-divisor = <4>;
+	dmas = <&dma 4>;
+	dma-names = "rx-tx";
+
+	status = "okay";
+};
+
+smi_pins: smi_pins {
+	brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+	/* Alt 1: SMI */
+	brcm,function = <5 5 5 5 5 5 5 5 5 5 5 5 5 5>;
+	/* /CS, /WE and /OE are pulled high, as they are
+	   generally active low signals */
+	brcm,pull = <2 2 2 2 2 2 0 0 0 0 0 0 0 0>;
+};
+

Documentation/devicetree/bindings/mtd/brcm,bcm2835-smi-nand.txt

@@ -0,0 +1,42 @@
+* BCM2835 SMI NAND flash
+
+This driver is a shim between the BCM2835 SMI driver (SMI is a peripheral for
+talking to parallel register interfaces) and Linux's MTD layer.
+
+Required properties:
+- compatible: "brcm,bcm2835-smi-nand"
+- status: "okay"
+
+Optional properties:
+- partition@n, where n is an integer from a consecutive sequence starting at 0
+	- Difficult to store partition table on NAND device - normally put it
+	in the source code, kernel bootparams, or device tree (the best way!)
+	- Sub-properties:
+		- label: the partition name, as shown by mtdinfo /dev/mtd*
+		- reg: the size and offset of this partition.
+		- (optional) read-only: an empty property flagging as read only
+
+Example:
+
+nand: flash@0 {
+	compatible = "brcm,bcm2835-smi-nand";
+	status = "okay";
+
+	partition@0 {
+		label = "stage2";
+		// 128k
+		reg = <0 0x20000>;
+		read-only;
+	};
+	partition@1 {
+		label = "firmware";
+		// 16M
+		reg = <0x20000 0x1000000>;
+		read-only;
+	};
+	partition@2 {
+		label = "root";
+		// 2G
+		reg = <0x1020000 0x80000000>;
+	};
+};

Documentation/devicetree/bindings/net/ethernet.txt

@@ -25,7 +25,11 @@ The following properties are common to the Ethernet controllers:
   flow control thresholds.
 - tx-fifo-depth: the size of the controller's transmit fifo in bytes. This
   is used for components that can have configurable fifo sizes.
+- managed: string, specifies the PHY management type. Supported values are:
+  "auto", "in-band-status". "auto" is the default, it usess MDIO for
+  management if fixed-link is not specified.
 
 Child nodes of the Ethernet controller are typically the individual PHY devices
 connected via the MDIO bus (sometimes the MDIO bus controller is separate).
 They are described in the phy.txt file in this same directory.
+For non-MDIO PHY management see fixed-link.txt.

Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt

@@ -1,7 +1,7 @@
 * Marvell Armada 370 / Armada XP Ethernet Controller (NETA)
 
 Required properties:
-- compatible: should be "marvell,armada-370-neta".
+- compatible: "marvell,armada-370-neta" or "marvell,armada-xp-neta".
 - reg: address and length of the register set for the device.
 - interrupts: interrupt for the device
 - phy: See ethernet.txt file in the same directory.

Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt

@@ -92,5 +92,5 @@ mpp61         61       gpo, dev(wen1), uart1(txd), audio(rclk)
 mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
                        audio(mclk), uart0(cts)
 mpp63         63       gpo, spi0(sck), tclk
-mpp64         64       gpio, spi0(miso), spi0-1(cs1)
+mpp64         64       gpio, spi0(miso), spi0(cs1)
-mpp65         65       gpio, spi0(mosi), spi0-1(cs2)
+mpp65         65       gpio, spi0(mosi), spi0(cs2)

Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt

@@ -22,8 +22,8 @@ mpp5          5        gpio, dev(ad7), spi0(cs2), spi1(cs2)
 mpp6          6        gpio, dev(ad0), led(p1), audio(rclk)
 mpp7          7        gpio, dev(ad1), ptp(clk), led(p2), audio(extclk)
 mpp8          8        gpio, dev (bootcs), spi0(cs0), spi1(cs0)
-mpp9          9        gpio, nf(wen), spi0(sck), spi1(sck)
+mpp9          9        gpio, spi0(sck), spi1(sck), nand(we)
-mpp10        10        gpio, nf(ren), dram(vttctrl), led(c1)
+mpp10        10        gpio, dram(vttctrl), led(c1), nand(re)
 mpp11        11        gpio, dev(a0), led(c2), audio(sdo)
 mpp12        12        gpio, dev(a1), audio(bclk)
 mpp13        13        gpio, dev(readyn), pcie0(rstoutn), pcie1(rstoutn)

Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt

@@ -27,15 +27,15 @@ mpp8          8        gpio, ge0(txd1), dev(ad10)
 mpp9          9        gpio, ge0(txd2), dev(ad11)
 mpp10         10       gpio, ge0(txd3), dev(ad12)
 mpp11         11       gpio, ge0(txctl), dev(ad13)
-mpp12         12       gpio, ge0(rxd0), pcie0(rstout), pcie1(rstout) [1], spi0(cs1), dev(ad14)
+mpp12         12       gpio, ge0(rxd0), pcie0(rstout), spi0(cs1), dev(ad14), pcie3(clkreq)
-mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15)
+mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15), pcie2(clkreq)
-mpp14         14       gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1)
+mpp14         14       gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1), pcie3(clkreq)
-mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi), pcie1(rstout) [1]
+mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi)
-mpp16         16       gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq)
+mpp16         16       gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq), pcie1(clkreq) [1]
 mpp17         17       gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt)
-mpp18         18       gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0), pcie1(rstout) [1]
+mpp18         18       gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0)
-mpp19         19       gpio, ge0(col), ptp(event_req), pcie0(clkreq), sata1(prsnt), ua0(cts)
+mpp19         19       gpio, ge0(col), ptp(event_req), ge0(txerr), sata1(prsnt), ua0(cts)
-mpp20         20       gpio, ge0(txclk), ptp(clk), pcie1(rstout) [1], sata0(prsnt), ua0(rts)
+mpp20         20       gpio, ge0(txclk), ptp(clk), sata0(prsnt), ua0(rts)
 mpp21         21       gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs)
 mpp22         22       gpio, spi0(mosi), dev(ad0)
 mpp23         23       gpio, spi0(sck), dev(ad2)
@@ -58,23 +58,23 @@ mpp39         39       gpio, i2c1(sck), ge1(rxd2), ua0(cts), sd0(d1), dev(a2)
 mpp40         40       gpio, i2c1(sda), ge1(rxd3), ua0(rts), sd0(d2), dev(ad6)
 mpp41         41       gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last)
 mpp42         42       gpio, ua1(txd), ua0(rts), dev(ad7)
-mpp43         43       gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), pcie0(rstout), dev(clkout)
+mpp43         43       gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), spi1(cs2), dev(clkout)
-mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3], pcie0(rstout)
+mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3]
-mpp45         45       gpio, ref(clk_out0), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
+mpp45         45       gpio, ref(clk_out0), pcie0(rstout)
-mpp46         46       gpio, ref(clk_out1), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
+mpp46         46       gpio, ref(clk_out1), pcie0(rstout)
-mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], spi1(cs2), sata3(prsnt) [2]
+mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [2]
-mpp48         48       gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4)
+mpp48         48       gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4), pcie0(clkreq)
-mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5)
+mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5), pcie1(clkreq)
-mpp50         50       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(drx), audio(extclk), sd0(cmd)
+mpp50         50       gpio, pcie0(rstout), tdm2c(drx), audio(extclk), sd0(cmd)
 mpp51         51       gpio, tdm2c(dtx), audio(sdo), m(decc_err)
-mpp52         52       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(intn), audio(sdi), sd0(d6)
+mpp52         52       gpio, pcie0(rstout), tdm2c(intn), audio(sdi), sd0(d6)
 mpp53         53       gpio, sata1(prsnt), sata0(prsnt), tdm2c(rstn), audio(bclk), sd0(d7)
-mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), pcie1(rstout) [1], sd0(d3)
+mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), ge0(txerr), sd0(d3)
 mpp55         55       gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0)
 mpp56         56       gpio, ua1(rts), ge(mdc), m(decc_err), spi1(mosi)
 mpp57         57       gpio, spi1(sck), sd0(clk)
 mpp58         58       gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1)
-mpp59         59       gpio, pcie0(rstout), i2c1(sda), pcie1(rstout) [1], spi1(cs0), sd0(d2)
+mpp59         59       gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2)
 
 [1]: only available on 88F6820 and 88F6828
 [2]: only available on 88F6828

Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt

@@ -42,15 +42,15 @@ mpp20         20       gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
 mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat)
 mpp22         22       gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
 mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
-mpp24         24       gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst)
+mpp24         24       gpio, lcd(hsync), sata1(prsnt), tdm(rst)
-mpp25         25       gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk)
+mpp25         25       gpio, lcd(vsync), sata0(prsnt), tdm(pclk)
-mpp26         26       gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp26         26       gpio, lcd(clk), tdm(fsync)
 mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
 mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)
-mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk)
 mpp30         30       gpio, tdm(int1), sd0(clk)
-mpp31         31       gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
+mpp31         31       gpio, tdm(int2), sd0(cmd)
-mpp32         32       gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
+mpp32         32       gpio, tdm(int3), sd0(d0)
 mpp33         33       gpio, tdm(int4), sd0(d1), mem(bat)
 mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt)
 mpp35         35       gpio, tdm(int6), sd0(d3), sata1(prsnt)
@@ -58,21 +58,18 @@ mpp36         36       gpio, spi(mosi)
 mpp37         37       gpio, spi(miso)
 mpp38         38       gpio, spi(sck)
 mpp39         39       gpio, spi(cs0)
-mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
+mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0)
-                       pcie(clkreq0)
 mpp41         41       gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
                        pcie(clkreq1)
-mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
+mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer)
-                       vdd(cpu0-pd)
+mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout)
-mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
-                       vdd(cpu2-3-pd){1}
 mpp44         44       gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
                        mem(bat)
 mpp45         45       gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)
 mpp46         46       gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt)
 mpp47         47       gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3),
                        ref(clkout)
-mpp48         48       gpio, tclk, dev(burst/last)
+mpp48         48       gpio, dev(clkout), dev(burst/last)
 
 * Marvell Armada XP (mv78260 and mv78460 only)
 
@@ -84,9 +81,9 @@ mpp51         51       gpio, dev(ad16)
 mpp52         52       gpio, dev(ad17)
 mpp53         53       gpio, dev(ad18)
 mpp54         54       gpio, dev(ad19)
-mpp55         55       gpio, dev(ad20), vdd(cpu0-pd)
+mpp55         55       gpio, dev(ad20)
-mpp56         56       gpio, dev(ad21), vdd(cpu1-pd)
+mpp56         56       gpio, dev(ad21)
-mpp57         57       gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp57         57       gpio, dev(ad22)
 mpp58         58       gpio, dev(ad23)
 mpp59         59       gpio, dev(ad24)
 mpp60         60       gpio, dev(ad25)
@@ -96,6 +93,3 @@ mpp63         63       gpio, dev(ad28)
 mpp64         64       gpio, dev(ad29)
 mpp65         65       gpio, dev(ad30)
 mpp66         66       gpio, dev(ad31)
-
-Notes:
-* {1} vdd(cpu2-3-pd) only available on mv78460.

Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt

@@ -16,8 +16,8 @@ Example:
 
 bcm2835_i2s: i2s@7e203000 {
 	compatible = "brcm,bcm2835-i2s";
-	reg = <0x7e203000 0x20>,
+	reg = <0x7e203000 0x24>,
-	      <0x7e101098 0x02>;
+	      <0x7e101098 0x08>;
 
 	dmas = <&dma 2>,
 	       <&dma 3>;

Documentation/devicetree/bindings/spi/spi_pl022.txt

@@ -4,9 +4,9 @@ Required properties:
 - compatible : "arm,pl022", "arm,primecell"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
+- num-cs : total number of chipselects
 
 Optional properties:
-- num-cs : total number of chipselects
 - cs-gpios : should specify GPIOs used for chipselects.
   The gpios will be referred to as reg = <index> in the SPI child nodes.
   If unspecified, a single SPI device without a chip select can be used.

Documentation/devicetree/bindings/usb/atmel-usb.txt

@@ -60,9 +60,9 @@ Atmel High-Speed USB device controller
 
 Required properties:
  - compatible: Should be one of the following
-	       "at91sam9rl-udc"
+	       "atmel,at91sam9rl-udc"
-	       "at91sam9g45-udc"
+	       "atmel,at91sam9g45-udc"
-	       "sama5d3-udc"
+	       "atmel,sama5d3-udc"
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - ep childnode: To specify the number of endpoints and their properties.

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -76,6 +76,7 @@ everspin	Everspin Technologies, Inc.
 excito	Excito
 fcs	Fairchild Semiconductor
 firefly	Firefly
+focaltech	FocalTech Systems Co.,Ltd
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.

Documentation/filesystems/proc.txt

@@ -140,7 +140,8 @@ Table 1-1: Process specific entries in /proc
  stat		Process status
  statm		Process memory status information
  status		Process status in human readable form
- wchan		If CONFIG_KALLSYMS is set, a pre-decoded wchan
+ wchan		Present with CONFIG_KALLSYMS=y: it shows the kernel function
+		symbol the task is blocked in - or "0" if not blocked.
  pagemap	Page table
  stack		Report full stack trace, enable via CONFIG_STACKTRACE
  smaps		a extension based on maps, showing the memory consumption of
@@ -309,7 +310,7 @@ Table 1-4: Contents of the stat files (as of 2.6.30-rc7)
   blocked       bitmap of blocked signals
   sigign        bitmap of ignored signals
   sigcatch      bitmap of caught signals
-  wchan         address where process went to sleep
+  0		(place holder, used to be the wchan address, use /proc/PID/wchan instead)
   0             (place holder)
   0             (place holder)
   exit_signal   signal to send to parent thread on exit

Documentation/hwmon/nct7904

@@ -35,11 +35,11 @@ temp1_input		Local temperature (1/1000 degree,
 temp[2-9]_input		CPU temperatures (1/1000 degree,
 			0.125 degree resolution)
 
-fan[1-4]_mode		R/W, 0/1 for manual or SmartFan mode
+pwm[1-4]_enable		R/W, 1/2 for manual or SmartFan mode
 			Setting SmartFan mode is supported only if it has been
 			previously configured by BIOS (or configuration EEPROM)
 
-fan[1-4]_pwm		R/O in SmartFan mode, R/W in manual control mode
+pwm[1-4]		R/O in SmartFan mode, R/W in manual control mode
 
 The driver checks sensor control registers and does not export the sensors
 that are not enabled. Anyway, a sensor that is enabled may actually be not

Documentation/input/alps.txt

@@ -119,8 +119,10 @@ ALPS Absolute Mode - Protocol Version 2
  byte 5:  0   z6   z5   z4   z3   z2   z1   z0
 
 Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for
-the DualPoint Stick. For non interleaved dualpoint devices the pointingstick
+the DualPoint Stick. The M, R and L bits signal the combined status of both
-buttons get reported separately in the PSM, PSR and PSL bits.
+the pointingstick and touchpad buttons, except for Dell dualpoint devices
+where the pointingstick buttons get reported separately in the PSM, PSR
+and PSL bits.
 
 Dualpoint device -- interleaved packet format
 ---------------------------------------------

Documentation/kbuild/makefiles.txt

@@ -952,6 +952,14 @@ When kbuild executes, the following steps are followed (roughly):
 	$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
 	mode) if this option is supported by $(AR).
 
+    ARCH_CPPFLAGS, ARCH_AFLAGS, ARCH_CFLAGS   Overrides the kbuild defaults
+
+	These variables are appended to the KBUILD_CPPFLAGS,
+	KBUILD_AFLAGS, and KBUILD_CFLAGS, respectively, after the
+	top-level Makefile has set any other flags. This provides a
+	means for an architecture to override the defaults.
+
+
 --- 6.2 Add prerequisites to archheaders:
 
 	The archheaders: rule is used to generate header files that

Documentation/kernel-parameters.txt

@@ -1398,7 +1398,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			The list of supported hash algorithms is defined
 			in crypto/hash_info.h.
 
-	ima_tcb		[IMA]
+	ima_policy=	[IMA]
+			The builtin measurement policy to load during IMA
+			setup.  Specyfing "tcb" as the value, measures all
+			programs exec'd, files mmap'd for exec, and all files
+			opened with the read mode bit set by either the
+			effective uid (euid=0) or uid=0.
+			Format: "tcb"
+
+	ima_tcb		[IMA] Deprecated.  Use ima_policy= instead.
 			Load a policy which meets the needs of the Trusted
 			Computing Base.  This means IMA will measure all
 			programs exec'd, files mmap'd for exec, and all files

Documentation/networking/ip-sysctl.txt

@@ -1321,6 +1321,14 @@ accept_ra_from_local - BOOLEAN
 	   disabled if accept_ra_from_local is disabled
                on a specific interface.
 
+accept_ra_min_hop_limit - INTEGER
+	Minimum hop limit Information in Router Advertisement.
+
+	Hop limit Information in Router Advertisement less than this
+	variable shall be ignored.
+
+	Default: 1
+
 accept_ra_pinfo - BOOLEAN
 	Learn Prefix Information in Router Advertisement.
 

Documentation/usb/gadget-testing.txt

@@ -237,9 +237,7 @@ Testing the LOOPBACK function
 -----------------------------
 
 device: run the gadget
-host: test-usb
+host: test-usb (tools/usb/testusb.c)
-
-http://www.linux-usb.org/usbtest/testusb.c
 
 8. MASS STORAGE function
 ========================
@@ -588,9 +586,8 @@ Testing the SOURCESINK function
 -------------------------------
 
 device: run the gadget
-host: test-usb
+host: test-usb (tools/usb/testusb.c)
 
-http://www.linux-usb.org/usbtest/testusb.c
 
 16. UAC1 function
 =================

Documentation/video4linux/bcm2835-v4l2.txt

@@ -0,0 +1,60 @@
+
+BCM2835 (aka Raspberry Pi) V4L2 driver
+======================================
+
+1. Copyright
+============
+
+Copyright © 2013 Raspberry Pi (Trading) Ltd.
+
+2. License
+==========
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+3. Quick Start
+==============
+
+You need a version 1.0 or later of v4l2-ctl, available from:
+	git://git.linuxtv.org/v4l-utils.git
+
+$ sudo modprobe bcm2835-v4l2
+
+Turn on the overlay:
+
+$ v4l2-ctl --overlay=1
+
+Turn off the overlay:
+
+$ v4l2-ctl --overlay=0
+
+Set the capture format for video:
+
+$ v4l2-ctl  --set-fmt-video=width=1920,height=1088,pixelformat=4
+
+(Note: 1088 not 1080).
+
+Capture:
+
+$ v4l2-ctl --stream-mmap=3 --stream-count=100 --stream-to=somefile.h264
+
+Stills capture:
+
+$ v4l2-ctl  --set-fmt-video=width=2592,height=1944,pixelformat=3
+$ v4l2-ctl --stream-mmap=3 --stream-count=1 --stream-to=somefile.jpg
+
+List of available formats:
+
+$ v4l2-ctl --list-formats

Documentation/w1/slaves/w1_therm

@@ -11,12 +11,14 @@ Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
 Description
 -----------
 
-w1_therm provides basic temperature conversion for ds18*20 devices.
+w1_therm provides basic temperature conversion for ds18*20 devices, and the
+ds28ea00 device.
 supported family codes:
 W1_THERM_DS18S20	0x10
 W1_THERM_DS1822		0x22
 W1_THERM_DS18B20	0x28
 W1_THERM_DS1825		0x3B
+W1_THERM_DS28EA00	0x42
 
 Support is provided through the sysfs w1_slave file.  Each open and
 read sequence will initiate a temperature conversion then provide two
@@ -48,3 +50,10 @@ resistor).  The DS18b20 temperature sensor specification lists a
 maximum current draw of 1.5mA and that a 5k pullup resistor is not
 sufficient.  The strong pullup is designed to provide the additional
 current required.
+
+The DS28EA00 provides an additional two pins for implementing a sequence
+detection algorithm.  This feature allows you to determine the physical
+location of the chip in the 1-wire bus without needing pre-existing
+knowledge of the bus ordering.  Support is provided through the sysfs
+w1_seq file.  The file will contain a single line with an integer value
+representing the device index in the bus starting at 0.

Makefile

@@ -1,8 +1,8 @@
 VERSION = 4
 PATCHLEVEL = 1
-SUBLEVEL = 0
+SUBLEVEL = 19
 EXTRAVERSION =
-NAME = Hurr durr I'ma sheep
+NAME = Series 4800
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -783,10 +783,11 @@ endif
 include scripts/Makefile.kasan
 include scripts/Makefile.extrawarn
 
-# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+# Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the
-KBUILD_CPPFLAGS += $(KCPPFLAGS)
+# last assignments
-KBUILD_AFLAGS += $(KAFLAGS)
+KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS)
-KBUILD_CFLAGS += $(KCFLAGS)
+KBUILD_AFLAGS   += $(ARCH_AFLAGS)   $(KAFLAGS)
+KBUILD_CFLAGS   += $(ARCH_CFLAGS)   $(KCFLAGS)
 
 # Use --build-id when available.
 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\

arch/arc/Makefile

@@ -43,7 +43,8 @@ endif
 
 ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
 # Generic build system uses -O2, we want -O3
-cflags-y  += -O3
+# Note: No need to add to cflags-y as that happens anyways
+ARCH_CFLAGS += -O3
 endif
 
 # small data is default for elf32 tool-chain. If not usable, disable it

arch/arc/include/asm/atomic.h

@@ -43,6 +43,12 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 {									\
 	unsigned int temp;						\
 									\
+	/*								\
+	 * Explicit full memory barrier needed before/after as		\
+	 * LLOCK/SCOND thmeselves don't provide any such semantics	\
+	 */								\
+	smp_mb();							\
+									\
 	__asm__ __volatile__(						\
 	"1:	llock   %0, [%1]	\n"				\
 	"	" #asm_op " %0, %0, %2	\n"				\
@@ -52,6 +58,8 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 	: "r"(&v->counter), "ir"(i)					\
 	: "cc");							\
 									\
+	smp_mb();							\
+									\
 	return temp;							\
 }
 
@@ -105,6 +113,9 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 	unsigned long flags;						\
 	unsigned long temp;						\
 									\
+	/*								\
+	 * spin lock/unlock provides the needed smp_mb() before/after	\
+	 */								\
 	atomic_ops_lock(flags);						\
 	temp = v->counter;						\
 	temp c_op i;							\
@@ -142,9 +153,19 @@ ATOMIC_OP(and, &=, and)
 #define __atomic_add_unless(v, a, u)					\
 ({									\
 	int c, old;							\
+									\
+	/*								\
+	 * Explicit full memory barrier needed before/after as		\
+	 * LLOCK/SCOND thmeselves don't provide any such semantics	\
+	 */								\
+	smp_mb();							\
+									\
 	c = atomic_read(v);						\
 	while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c)\
 		c = old;						\
+									\
+	smp_mb();							\
+									\
 	c;								\
 })
 

arch/arc/include/asm/bitops.h

@@ -18,83 +18,49 @@
 #include <linux/types.h>
 #include <linux/compiler.h>
 #include <asm/barrier.h>
+#ifndef CONFIG_ARC_HAS_LLSC
+#include <asm/smp.h>
+#endif
 
-/*
- * Hardware assisted read-modify-write using ARC700 LLOCK/SCOND insns.
- * The Kconfig glue ensures that in SMP, this is only set if the container
- * SoC/platform has cross-core coherent LLOCK/SCOND
- */
 #if defined(CONFIG_ARC_HAS_LLSC)
 
-static inline void set_bit(unsigned long nr, volatile unsigned long *m)
+/*
-{
+ * Hardware assisted Atomic-R-M-W
-	unsigned int temp;
+ */
 
-	m += nr >> 5;
+#define BIT_OP(op, c_op, asm_op)					\
-
+static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
-	/*
+{									\
-	 * ARC ISA micro-optimization:
+	unsigned int temp;						\
-	 *
+									\
-	 * Instructions dealing with bitpos only consider lower 5 bits (0-31)
+	m += nr >> 5;							\
-	 * e.g (x << 33) is handled like (x << 1) by ASL instruction
+									\
-	 *  (mem pointer still needs adjustment to point to next word)
+	/*								\
-	 *
+	 * ARC ISA micro-optimization:					\
-	 * Hence the masking to clamp @nr arg can be elided in general.
+	 *								\
-	 *
+	 * Instructions dealing with bitpos only consider lower 5 bits	\
-	 * However if @nr is a constant (above assumed it in a register),
+	 * e.g (x << 33) is handled like (x << 1) by ASL instruction	\
-	 * and greater than 31, gcc can optimize away (x << 33) to 0,
+	 *  (mem pointer still needs adjustment to point to next word)	\
-	 * as overflow, given the 32-bit ISA. Thus masking needs to be done
+	 *								\
-	 * for constant @nr, but no code is generated due to const prop.
+	 * Hence the masking to clamp @nr arg can be elided in general.	\
-	 */
+	 *								\
-	if (__builtin_constant_p(nr))
+	 * However if @nr is a constant (above assumed in a register),	\
-		nr &= 0x1f;
+	 * and greater than 31, gcc can optimize away (x << 33) to 0,	\
-
+	 * as overflow, given the 32-bit ISA. Thus masking needs to be	\
-	__asm__ __volatile__(
+	 * done for const @nr, but no code is generated due to gcc	\
-	"1:	llock   %0, [%1]	\n"
+	 * const prop.							\
-	"	bset    %0, %0, %2	\n"
+	 */								\
-	"	scond   %0, [%1]	\n"
+	nr &= 0x1f;							\
-	"	bnz     1b	\n"
+									\
-	: "=&r"(temp)
+	__asm__ __volatile__(						\
-	: "r"(m), "ir"(nr)
+	"1:	llock       %0, [%1]		\n"			\
-	: "cc");
+	"	" #asm_op " %0, %0, %2	\n"				\
-}
+	"	scond       %0, [%1]		\n"			\
-
+	"	bnz         1b			\n"			\
-static inline void clear_bit(unsigned long nr, volatile unsigned long *m)
+	: "=&r"(temp)	/* Early clobber, to prevent reg reuse */	\
-{
+	: "r"(m),	/* Not "m": llock only supports reg direct addr mode */	\
-	unsigned int temp;
+	  "ir"(nr)							\
-
+	: "cc");							\
-	m += nr >> 5;
-
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	__asm__ __volatile__(
-	"1:	llock   %0, [%1]	\n"
-	"	bclr    %0, %0, %2	\n"
-	"	scond   %0, [%1]	\n"
-	"	bnz     1b	\n"
-	: "=&r"(temp)
-	: "r"(m), "ir"(nr)
-	: "cc");
-}
-
-static inline void change_bit(unsigned long nr, volatile unsigned long *m)
-{
-	unsigned int temp;
-
-	m += nr >> 5;
-
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	__asm__ __volatile__(
-	"1:	llock   %0, [%1]	\n"
-	"	bxor    %0, %0, %2	\n"
-	"	scond   %0, [%1]	\n"
-	"	bnz     1b		\n"
-	: "=&r"(temp)
-	: "r"(m), "ir"(nr)
-	: "cc");
 }
 
 /*
@@ -108,75 +74,37 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *m)
  * Since ARC lacks a equivalent h/w primitive, the bit is set unconditionally
  * and the old value of bit is returned
  */
-static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *m)
+#define TEST_N_BIT_OP(op, c_op, asm_op)					\
-{
+static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-	unsigned long old, temp;
+{									\
-
+	unsigned long old, temp;					\
-	m += nr >> 5;
+									\
-
+	m += nr >> 5;							\
-	if (__builtin_constant_p(nr))
+									\
-		nr &= 0x1f;
+	nr &= 0x1f;							\
-
+									\
-	__asm__ __volatile__(
+	/*								\
-	"1:	llock   %0, [%2]	\n"
+	 * Explicit full memory barrier needed before/after as		\
-	"	bset    %1, %0, %3	\n"
+	 * LLOCK/SCOND themselves don't provide any such smenatic	\
-	"	scond   %1, [%2]	\n"
+	 */								\
-	"	bnz     1b		\n"
+	smp_mb();							\
-	: "=&r"(old), "=&r"(temp)
+									\
-	: "r"(m), "ir"(nr)
+	__asm__ __volatile__(						\
-	: "cc");
+	"1:	llock       %0, [%2]	\n"				\
-
+	"	" #asm_op " %1, %0, %3	\n"				\
-	return (old & (1 << nr)) != 0;
+	"	scond       %1, [%2]	\n"				\
-}
+	"	bnz         1b		\n"				\
-
+	: "=&r"(old), "=&r"(temp)					\
-static inline int
+	: "r"(m), "ir"(nr)						\
-test_and_clear_bit(unsigned long nr, volatile unsigned long *m)
+	: "cc");							\
-{
+									\
-	unsigned int old, temp;
+	smp_mb();							\
-
+									\
-	m += nr >> 5;
+	return (old & (1 << nr)) != 0;					\
-
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	__asm__ __volatile__(
-	"1:	llock   %0, [%2]	\n"
-	"	bclr    %1, %0, %3	\n"
-	"	scond   %1, [%2]	\n"
-	"	bnz     1b		\n"
-	: "=&r"(old), "=&r"(temp)
-	: "r"(m), "ir"(nr)
-	: "cc");
-
-	return (old & (1 << nr)) != 0;
-}
-
-static inline int
-test_and_change_bit(unsigned long nr, volatile unsigned long *m)
-{
-	unsigned int old, temp;
-
-	m += nr >> 5;
-
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	__asm__ __volatile__(
-	"1:	llock   %0, [%2]	\n"
-	"	bxor    %1, %0, %3	\n"
-	"	scond   %1, [%2]	\n"
-	"	bnz     1b		\n"
-	: "=&r"(old), "=&r"(temp)
-	: "r"(m), "ir"(nr)
-	: "cc");
-
-	return (old & (1 << nr)) != 0;
 }
 
 #else	/* !CONFIG_ARC_HAS_LLSC */
 
-#include <asm/smp.h>
-
 /*
  * Non hardware assisted Atomic-R-M-W
  * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
@@ -193,108 +121,37 @@ test_and_change_bit(unsigned long nr, volatile unsigned long *m)
  *             at compile time)
  */
 
-static inline void set_bit(unsigned long nr, volatile unsigned long *m)
+#define BIT_OP(op, c_op, asm_op)					\
-{
+static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
-	unsigned long temp, flags;
+{									\
-	m += nr >> 5;
+	unsigned long temp, flags;					\
-
+	m += nr >> 5;							\
-	if (__builtin_constant_p(nr))
+									\
-		nr &= 0x1f;
+	/*								\
-
+	 * spin lock/unlock provide the needed smp_mb() before/after	\
-	bitops_lock(flags);
+	 */								\
-
+	bitops_lock(flags);						\
-	temp = *m;
+									\
-	*m = temp | (1UL << nr);
+	temp = *m;							\
-
+	*m = temp c_op (1UL << (nr & 0x1f));					\
-	bitops_unlock(flags);
+									\
+	bitops_unlock(flags);						\
 }
 
-static inline void clear_bit(unsigned long nr, volatile unsigned long *m)
+#define TEST_N_BIT_OP(op, c_op, asm_op)					\
-{
+static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-	unsigned long temp, flags;
+{									\
-	m += nr >> 5;
+	unsigned long old, flags;					\
-
+	m += nr >> 5;							\
-	if (__builtin_constant_p(nr))
+									\
-		nr &= 0x1f;
+	bitops_lock(flags);						\
-
+									\
-	bitops_lock(flags);
+	old = *m;							\
-
+	*m = old c_op (1UL << (nr & 0x1f));				\
-	temp = *m;
+									\
-	*m = temp & ~(1UL << nr);
+	bitops_unlock(flags);						\
-
+									\
-	bitops_unlock(flags);
+	return (old & (1UL << (nr & 0x1f))) != 0;			\
-}
-
-static inline void change_bit(unsigned long nr, volatile unsigned long *m)
-{
-	unsigned long temp, flags;
-	m += nr >> 5;
-
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	bitops_lock(flags);
-
-	temp = *m;
-	*m = temp ^ (1UL << nr);
-
-	bitops_unlock(flags);
-}
-
-static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *m)
-{
-	unsigned long old, flags;
-	m += nr >> 5;
-
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	bitops_lock(flags);
-
-	old = *m;
-	*m = old | (1 << nr);
-
-	bitops_unlock(flags);
-
-	return (old & (1 << nr)) != 0;
-}
-
-static inline int
-test_and_clear_bit(unsigned long nr, volatile unsigned long *m)
-{
-	unsigned long old, flags;
-	m += nr >> 5;
-
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	bitops_lock(flags);
-
-	old = *m;
-	*m = old & ~(1 << nr);
-
-	bitops_unlock(flags);
-
-	return (old & (1 << nr)) != 0;
-}
-
-static inline int
-test_and_change_bit(unsigned long nr, volatile unsigned long *m)
-{
-	unsigned long old, flags;
-	m += nr >> 5;
-
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	bitops_lock(flags);
-
-	old = *m;
-	*m = old ^ (1 << nr);
-
-	bitops_unlock(flags);
-
-	return (old & (1 << nr)) != 0;
 }
 
 #endif /* CONFIG_ARC_HAS_LLSC */
@@ -303,86 +160,45 @@ test_and_change_bit(unsigned long nr, volatile unsigned long *m)
  * Non atomic variants
  **************************************/
 
-static inline void __set_bit(unsigned long nr, volatile unsigned long *m)
+#define __BIT_OP(op, c_op, asm_op)					\
-{
+static inline void __##op##_bit(unsigned long nr, volatile unsigned long *m)	\
-	unsigned long temp;
+{									\
-	m += nr >> 5;
+	unsigned long temp;						\
-
+	m += nr >> 5;							\
-	if (__builtin_constant_p(nr))
+									\
-		nr &= 0x1f;
+	temp = *m;							\
-
+	*m = temp c_op (1UL << (nr & 0x1f));				\
-	temp = *m;
-	*m = temp | (1UL << nr);
 }
 
-static inline void __clear_bit(unsigned long nr, volatile unsigned long *m)
+#define __TEST_N_BIT_OP(op, c_op, asm_op)				\
-{
+static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-	unsigned long temp;
+{									\
-	m += nr >> 5;
+	unsigned long old;						\
-
+	m += nr >> 5;							\
-	if (__builtin_constant_p(nr))
+									\
-		nr &= 0x1f;
+	old = *m;							\
-
+	*m = old c_op (1UL << (nr & 0x1f));				\
-	temp = *m;
+									\
-	*m = temp & ~(1UL << nr);
+	return (old & (1UL << (nr & 0x1f))) != 0;			\
 }
 
-static inline void __change_bit(unsigned long nr, volatile unsigned long *m)
+#define BIT_OPS(op, c_op, asm_op)					\
-{
+									\
-	unsigned long temp;
+	/* set_bit(), clear_bit(), change_bit() */			\
-	m += nr >> 5;
+	BIT_OP(op, c_op, asm_op)					\
+									\
+	/* test_and_set_bit(), test_and_clear_bit(), test_and_change_bit() */\
+	TEST_N_BIT_OP(op, c_op, asm_op)					\
+									\
+	/* __set_bit(), __clear_bit(), __change_bit() */		\
+	__BIT_OP(op, c_op, asm_op)					\
+									\
+	/* __test_and_set_bit(), __test_and_clear_bit(), __test_and_change_bit() */\
+	__TEST_N_BIT_OP(op, c_op, asm_op)
 
-	if (__builtin_constant_p(nr))
+BIT_OPS(set, |, bset)
-		nr &= 0x1f;
+BIT_OPS(clear, & ~, bclr)
-
+BIT_OPS(change, ^, bxor)
-	temp = *m;
-	*m = temp ^ (1UL << nr);
-}
-
-static inline int
-__test_and_set_bit(unsigned long nr, volatile unsigned long *m)
-{
-	unsigned long old;
-	m += nr >> 5;
-
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	old = *m;
-	*m = old | (1 << nr);
-
-	return (old & (1 << nr)) != 0;
-}
-
-static inline int
-__test_and_clear_bit(unsigned long nr, volatile unsigned long *m)
-{
-	unsigned long old;
-	m += nr >> 5;
-
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	old = *m;
-	*m = old & ~(1 << nr);
-
-	return (old & (1 << nr)) != 0;
-}
-
-static inline int
-__test_and_change_bit(unsigned long nr, volatile unsigned long *m)
-{
-	unsigned long old;
-	m += nr >> 5;
-
-	if (__builtin_constant_p(nr))
-		nr &= 0x1f;
-
-	old = *m;
-	*m = old ^ (1 << nr);
-
-	return (old & (1 << nr)) != 0;
-}
 
 /*
  * This routine doesn't need to be atomic.
@@ -394,10 +210,7 @@ test_bit(unsigned int nr, const volatile unsigned long *addr)
 
 	addr += nr >> 5;
 
-	if (__builtin_constant_p(nr))
+	mask = 1UL << (nr & 0x1f);
-		nr &= 0x1f;
-
-	mask = 1 << nr;
 
 	return ((mask & *addr) != 0);
 }

arch/arc/include/asm/cmpxchg.h

@@ -10,6 +10,8 @@
 #define __ASM_ARC_CMPXCHG_H
 
 #include <linux/types.h>
+
+#include <asm/barrier.h>
 #include <asm/smp.h>
 
 #ifdef CONFIG_ARC_HAS_LLSC
@@ -19,16 +21,25 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
 {
 	unsigned long prev;
 
+	/*
+	 * Explicit full memory barrier needed before/after as
+	 * LLOCK/SCOND thmeselves don't provide any such semantics
+	 */
+	smp_mb();
+
 	__asm__ __volatile__(
 	"1:	llock   %0, [%1]	\n"
 	"	brne    %0, %2, 2f	\n"
 	"	scond   %3, [%1]	\n"
 	"	bnz     1b		\n"
 	"2:				\n"
-	: "=&r"(prev)
+	: "=&r"(prev)	/* Early clobber, to prevent reg reuse */
-	: "r"(ptr), "ir"(expected),
+	: "r"(ptr),	/* Not "m": llock only supports reg direct addr mode */
-	  "r"(new) /* can't be "ir". scond can't take limm for "b" */
+	  "ir"(expected),
-	: "cc");
+	  "r"(new)	/* can't be "ir". scond can't take LIMM for "b" */
+	: "cc", "memory"); /* so that gcc knows memory is being written here */
+
+	smp_mb();
 
 	return prev;
 }
@@ -42,6 +53,9 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
 	int prev;
 	volatile unsigned long *p = ptr;
 
+	/*
+	 * spin lock/unlock provide the needed smp_mb() before/after
+	 */
 	atomic_ops_lock(flags);
 	prev = *p;
 	if (prev == expected)
@@ -77,12 +91,16 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
 
 	switch (size) {
 	case 4:
+		smp_mb();
+
 		__asm__ __volatile__(
 		"	ex  %0, [%1]	\n"
 		: "+r"(val)
 		: "r"(ptr)
 		: "memory");
 
+		smp_mb();
+
 		return val;
 	}
 	return __xchg_bad_pointer();

arch/arc/include/asm/ptrace.h

@@ -63,7 +63,7 @@ struct callee_regs {
 	long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
 
-#define instruction_pointer(regs)	((regs)->ret)
+#define instruction_pointer(regs)	(unsigned long)((regs)->ret)
 #define profile_pc(regs)		instruction_pointer(regs)
 
 /* return 1 if user mode or 0 if kernel mode */

arch/arc/include/asm/spinlock.h

@@ -22,24 +22,46 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 {
 	unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__;
 
+	/*
+	 * This smp_mb() is technically superfluous, we only need the one
+	 * after the lock for providing the ACQUIRE semantics.
+	 * However doing the "right" thing was regressing hackbench
+	 * so keeping this, pending further investigation
+	 */
+	smp_mb();
+
 	__asm__ __volatile__(
 	"1:	ex  %0, [%1]		\n"
 	"	breq  %0, %2, 1b	\n"
 	: "+&r" (tmp)
 	: "r"(&(lock->slock)), "ir"(__ARCH_SPIN_LOCK_LOCKED__)
 	: "memory");
+
+	/*
+	 * ACQUIRE barrier to ensure load/store after taking the lock
+	 * don't "bleed-up" out of the critical section (leak-in is allowed)
+	 * http://www.spinics.net/lists/kernel/msg2010409.html
+	 *
+	 * ARCv2 only has load-load, store-store and all-all barrier
+	 * thus need the full all-all barrier
+	 */
+	smp_mb();
 }
 
 static inline int arch_spin_trylock(arch_spinlock_t *lock)
 {
 	unsigned int tmp = __ARCH_SPIN_LOCK_LOCKED__;
 
+	smp_mb();
+
 	__asm__ __volatile__(
 	"1:	ex  %0, [%1]		\n"
 	: "+r" (tmp)
 	: "r"(&(lock->slock))
 	: "memory");
 
+	smp_mb();
+
 	return (tmp == __ARCH_SPIN_LOCK_UNLOCKED__);
 }
 
@@ -47,12 +69,22 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
 	unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
 
+	/*
+	 * RELEASE barrier: given the instructions avail on ARCv2, full barrier
+	 * is the only option
+	 */
+	smp_mb();
+
 	__asm__ __volatile__(
 	"	ex  %0, [%1]		\n"
 	: "+r" (tmp)
 	: "r"(&(lock->slock))
 	: "memory");
 
+	/*
+	 * superfluous, but keeping for now - see pairing version in
+	 * arch_spin_lock above
+	 */
 	smp_mb();
 }
 

arch/arc/kernel/perf_event.c

@@ -266,7 +266,6 @@ static int arc_pmu_add(struct perf_event *event, int flags)
 
 static int arc_pmu_device_probe(struct platform_device *pdev)
 {
-	struct arc_pmu *arc_pmu;
 	struct arc_reg_pct_build pct_bcr;
 	struct arc_reg_cc_build cc_bcr;
 	int i, j, ret;

arch/arm/Kconfig

@@ -314,6 +314,42 @@ choice
 	default ARCH_VERSATILE if !MMU
 	default ARCH_MULTIPLATFORM if MMU
 
+config ARCH_BCM2708
+	bool "Broadcom BCM2708 family"
+	select CPU_V6
+	select ARM_AMBA
+	select HAVE_SCHED_CLOCK
+	select NEED_MACH_GPIO_H
+	select NEED_MACH_MEMORY_H
+	select COMMON_CLK
+	select ARCH_HAS_CPUFREQ
+	select GENERIC_CLOCKEVENTS
+	select ARM_ERRATA_411920
+	select MACH_BCM2708
+	select VC4
+	select FIQ
+	help
+	  This enables support for Broadcom BCM2708 boards.
+
+config ARCH_BCM2709
+	bool "Broadcom BCM2709 family"
+	select ARCH_HAS_BARRIERS if SMP
+	select CPU_V7
+	select HAVE_SMP
+	select ARM_AMBA
+	select MIGHT_HAVE_CACHE_L2X0
+	select HAVE_SCHED_CLOCK
+	select NEED_MACH_MEMORY_H
+	select NEED_MACH_IO_H
+	select COMMON_CLK
+	select ARCH_HAS_CPUFREQ
+	select GENERIC_CLOCKEVENTS
+	select MACH_BCM2709
+	select VC4
+	select FIQ
+	help
+	  This enables support for Broadcom BCM2709 boards.
+
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
 	depends on MMU
@@ -538,6 +574,7 @@ config ARCH_ORION5X
 	select MVEBU_MBUS
 	select PCI
 	select PLAT_ORION_LEGACY
+	select MULTI_IRQ_HANDLER
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
@@ -823,6 +860,9 @@ config ARCH_VIRT
 # Kconfigs may be included either alphabetically (according to the
 # plat- suffix) or along side the corresponding mach-* source.
 #
+source "arch/arm/mach-bcm2708/Kconfig"
+source "arch/arm/mach-bcm2709/Kconfig"
+
 source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/mach-alpine/Kconfig"

arch/arm/Kconfig.debug

@@ -161,10 +161,9 @@ choice
 		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 		  bcm11351, etc...)
 
-	config DEBUG_BCM63XX
+	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
 		depends on ARCH_BCM_63XX
-		select DEBUG_UART_BCM63XX
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -1197,6 +1196,14 @@ choice
 		  options; the platform specific options are deprecated
 		  and will be soon removed.
 
+	config DEBUG_BCM2708_UART0
+		bool "Broadcom BCM2708 UART0 (PL011)"
+		depends on MACH_BCM2708
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
 endchoice
 
 config DEBUG_AT91_UART
@@ -1304,7 +1311,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "mach/debug-macro.S"
 
@@ -1320,10 +1327,6 @@ config DEBUG_UART_8250
 		ARCH_IOP33X || ARCH_IXP4XX || \
 		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
 
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
-	def_bool ARCH_BCM_63XX
-
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
 	default 0x00100a00 if DEBUG_NETX_UART
@@ -1415,7 +1418,7 @@ config DEBUG_UART_PHYS
 	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
 	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
 	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xfffe8600 if DEBUG_UART_BCM63XX
+	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xfffff700 if ARCH_IOP33X
 	depends on ARCH_EP93XX || \
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1427,7 +1430,7 @@ config DEBUG_UART_PHYS
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
 		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
 
 config DEBUG_UART_VIRT
@@ -1466,7 +1469,7 @@ config DEBUG_UART_VIRT
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
-	default 0xfcfe8600 if DEBUG_UART_BCM63XX
+	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
 	default 0xfd000000 if ARCH_SPEAR13XX
 	default 0xfd012000 if ARCH_MV78XX0
@@ -1516,7 +1519,7 @@ config DEBUG_UART_VIRT
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
 		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
 
 config DEBUG_UART_8250_SHIFT

arch/arm/Makefile

@@ -50,6 +50,14 @@ AS		+= -EL
 LD		+= -EL
 endif
 
+#
+# The Scalar Replacement of Aggregates (SRA) optimization pass in GCC 4.9 and
+# later may result in code being generated that handles signed short and signed
+# char struct members incorrectly. So disable it.
+# (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932)
+#
+KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
+
 # This selects which instruction set is used.
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
@@ -142,6 +150,8 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_BCM2708)		+= bcm2708
+machine-$(CONFIG_ARCH_BCM2709)		+= bcm2709
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
 machine-$(CONFIG_ARCH_AT91)		+= at91
 machine-$(CONFIG_ARCH_AXXIA)		+= axxia

arch/arm/boot/compressed/decompress.c

@@ -57,5 +57,5 @@ extern char * strstr(const char * s1, const char *s2);
 
 int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
 {
-	return decompress(input, len, NULL, NULL, output, NULL, error);
+	return __decompress(input, len, NULL, NULL, output, 0, NULL, error);
 }

arch/arm/boot/dts/Makefile

@@ -1,5 +1,25 @@
 ifeq ($(CONFIG_OF),y)
 
+dtb-$(CONFIG_BCM2708_DT) += bcm2708-rpi-b.dtb
+dtb-$(CONFIG_BCM2708_DT) += bcm2708-rpi-b-plus.dtb
+dtb-$(CONFIG_BCM2708_DT) += bcm2708-rpi-cm.dtb
+dtb-$(CONFIG_BCM2709_DT) += bcm2709-rpi-2-b.dtb
+dtb-$(CONFIG_BCM2709_DT) += bcm2710-rpi-3-b.dtb
+
+# Raspberry Pi
+ifeq ($(CONFIG_BCM2708_DT),y)
+   RPI_DT_OVERLAYS=y
+endif
+ifeq ($(CONFIG_BCM2709_DT),y)
+   RPI_DT_OVERLAYS=y
+endif
+ifeq ($(CONFIG_ARCH_BCM2835),y)
+   RPI_DT_OVERLAYS=y
+endif
+ifeq ($(RPI_DT_OVERLAYS),y)
+    dts-dirs += overlays
+endif
+
 dtb-$(CONFIG_ARCH_ALPINE) += \
 	alpine-db.dtb
 dtb-$(CONFIG_MACH_ASM9260) += \
@@ -660,7 +680,17 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt6592-evb.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
+
+targets += dtbs dtbs_install
+targets += $(dtb-y)
+
 endif
 
 always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
 clean-files	:= *.dtb
+
+# Enable fixups to support overlays on BCM2708 platforms
+ifeq ($(RPI_DT_OVERLAYS),y)
+	DTC_FLAGS ?= -@
+endif

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -354,11 +354,12 @@
 				/* SMPS9 unused */
 
 				ldo1_reg: ldo1 {
-					/* VDD_SD  */
+					/* VDD_SD / VDDSHV8  */
 					regulator-name = "ldo1";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-boot-on;
+					regulator-always-on;
 				};
 
 				ldo2_reg: ldo2 {
@@ -544,6 +545,10 @@
 	phy-supply = <&ldousb_reg>;
 };
 
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
 &usb1 {
 	dr_mode = "host";
 	pinctrl-names = "default";

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -270,7 +270,6 @@
 			};
 
 			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
 				reg = <0x70000 0x4000>;
 				interrupts = <8>;
 				clocks = <&gateclk 4>;
@@ -286,7 +285,6 @@
 			};
 
 			eth1: ethernet@74000 {
-				compatible = "marvell,armada-370-neta";
 				reg = <0x74000 0x4000>;
 				interrupts = <10>;
 				clocks = <&gateclk 3>;

arch/arm/boot/dts/armada-370.dtsi

@@ -307,6 +307,14 @@
 					dmacap,memset;
 				};
 			};
+
+			ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-370-neta";
+			};
 		};
 	};
 };

arch/arm/boot/dts/armada-385-db-ap.dts

@@ -46,7 +46,7 @@
 
 / {
 	model = "Marvell Armada 385 Access Point Development Board";
-	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
 
 	chosen {
 		stdout-path = "serial1:115200n8";

arch/arm/boot/dts/armada-388-gp.dts

@@ -288,16 +288,6 @@
 		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
 	};
 
-	reg_usb2_1_vbus: v5-vbus1 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-vbus1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
-	};
-
 	reg_sata0: pwr-sata0 {
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata0";

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -318,7 +318,7 @@
 			};
 
 			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
+				compatible = "marvell,armada-xp-neta";
 				reg = <0x34000 0x4000>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -356,7 +356,7 @@
 			};
 
 			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
+				compatible = "marvell,armada-xp-neta";
 				reg = <0x34000 0x4000>;
 				interrupts = <14>;
 				clocks = <&gateclk 1>;

arch/arm/boot/dts/armada-xp.dtsi

@@ -177,7 +177,7 @@
 			};
 
 			eth2: ethernet@30000 {
-				compatible = "marvell,armada-370-neta";
+				compatible = "marvell,armada-xp-neta";
 				reg = <0x30000 0x4000>;
 				interrupts = <12>;
 				clocks = <&gateclk 2>;
@@ -220,6 +220,14 @@
 				};
 			};
 
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
 			xor@f0900 {
 				compatible = "marvell,orion-xor";
 				reg = <0xF0900 0x100

arch/arm/boot/dts/at91-sama5d4_xplained.dts

@@ -98,7 +98,7 @@
 
 				phy0: ethernet-phy@1 {
 					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 					reg = <1>;
 				};
 			};

arch/arm/boot/dts/at91-sama5d4ek.dts

@@ -108,8 +108,8 @@
 			mmc0: mmc@f8000000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
-				slot@1 {
+				slot@0 {
-					reg = <1>;
+					reg = <0>;
 					bus-width = <4>;
 					cd-gpios = <&pioE 5 0>;
 				};
@@ -141,8 +141,15 @@
 			};
 
 			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			mmc1: mmc@fc000000 {
@@ -174,6 +181,10 @@
 
 			pinctrl@fc06a000 {
 				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -1148,7 +1148,7 @@
 			usb2: gadget@fff78000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-udc";
+				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00600000 0x80000
 				       0xfff78000 0x400>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -1062,7 +1062,7 @@
 			usb2: gadget@f803c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-udc";
+				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;

arch/arm/boot/dts/bcm2708-rpi-b-plus.dts

@@ -0,0 +1,143 @@
+/dts-v1/;
+
+/include/ "bcm2708.dtsi"
+
+/ {
+	compatible = "brcm,bcm2708";
+	model = "Raspberry Pi Model B+";
+};
+
+&gpio {
+	sdhost_pins: sdhost_pins {
+		brcm,pins = <48 49 50 51 52 53>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_pins: spi0_pins {
+		brcm,pins = <7 8 9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fb {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
+	};
+
+	spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&random {
+	status = "okay";
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 47 0>;
+	};
+
+	pwr_led: pwr {
+		label = "led1";
+		linux,default-trigger = "input";
+		gpios = <&gpio 35 0>;
+	};
+};
+
+/ {
+	__overrides__ {
+		uart0 = <&uart0>,"status";
+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
+		i2s = <&i2s>,"status";
+		spi = <&spi0>,"status";
+		i2c0 = <&i2c0>,"status";
+		i2c1 = <&i2c1>,"status";
+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
+		core_freq = <&clk_core>,"clock-frequency:0";
+
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		pwr_led_gpio = <&pwr_led>,"gpios:4";
+		pwr_led_activelow = <&pwr_led>,"gpios:8";
+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+
+		audio = <&audio>,"status";
+		watchdog = <&watchdog>,"status";
+		random = <&random>,"status";
+		sd_overclock = <&sdhost>,"brcm,overclock-50:0";
+		sd_force_pio = <&sdhost>,"brcm,force-pio?";
+		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
+		sd_debug     = <&sdhost>,"brcm,debug";
+	};
+};

arch/arm/boot/dts/bcm2708-rpi-b.dts

@@ -0,0 +1,133 @@
+/dts-v1/;
+
+/include/ "bcm2708.dtsi"
+
+/ {
+	compatible = "brcm,bcm2708";
+	model = "Raspberry Pi Model B";
+};
+
+&gpio {
+	sdhost_pins: sdhost_pins {
+		brcm,pins = <48 49 50 51 52 53>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_pins: spi0_pins {
+		brcm,pins = <7 8 9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <6>; /* alt2 */
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fb {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
+	};
+
+	spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&random {
+	status = "okay";
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 16 1>;
+	};
+};
+
+/ {
+	__overrides__ {
+		uart0 = <&uart0>,"status";
+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
+		i2s = <&i2s>,"status";
+		spi = <&spi0>,"status";
+		i2c0 = <&i2c0>,"status";
+		i2c1 = <&i2c1>,"status";
+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
+		core_freq = <&clk_core>,"clock-frequency:0";
+
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		audio = <&audio>,"status";
+		watchdog = <&watchdog>,"status";
+		random = <&random>,"status";
+		sd_overclock = <&sdhost>,"brcm,overclock-50:0";
+		sd_force_pio = <&sdhost>,"brcm,force-pio?";
+		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
+		sd_debug     = <&sdhost>,"brcm,debug";
+	};
+};

arch/arm/boot/dts/bcm2708-rpi-cm.dts

@@ -0,0 +1,95 @@
+/dts-v1/;
+
+/include/ "bcm2708-rpi-cm.dtsi"
+
+/ {
+	model = "Raspberry Pi Compute Module";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&gpio {
+	spi0_pins: spi0_pins {
+		brcm,pins = <7 8 9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
+	};
+
+	spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&random {
+	status = "okay";
+};
+
+/ {
+	__overrides__ {
+		uart0 = <&uart0>,"status";
+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
+		i2s = <&i2s>,"status";
+		spi = <&spi0>,"status";
+		i2c0 = <&i2c0>,"status";
+		i2c1 = <&i2c1>,"status";
+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
+	};
+};

arch/arm/boot/dts/bcm2708-rpi-cm.dtsi

@@ -0,0 +1,46 @@
+/include/ "bcm2708.dtsi"
+
+&gpio {
+	sdhost_pins: sdhost_pins {
+		brcm,pins = <48 49 50 51 52 53>;
+		brcm,function = <4>; /* alt0 */
+	};
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 47 0>;
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_pins>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&fb {
+	status = "okay";
+};
+
+/ {
+	__overrides__ {
+		core_freq = <&clk_core>,"clock-frequency:0";
+
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		audio = <&audio>,"status";
+		watchdog = <&watchdog>,"status";
+		random = <&random>,"status";
+		sd_overclock = <&sdhost>,"brcm,overclock-50:0";
+		sd_force_pio = <&sdhost>,"brcm,force-pio?";
+		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
+		sd_debug     = <&sdhost>,"brcm,debug";
+	};
+};

arch/arm/boot/dts/bcm2708.dtsi

@@ -0,0 +1,25 @@
+/include/ "bcm2708_common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2708";
+	model = "BCM2708";
+
+	chosen {
+		/* No padding required - the boot loader can do that. */
+		bootargs = "";
+	};
+
+	soc {
+		ranges = <0x7e000000 0x20000000 0x01000000>;
+
+		arm-pmu {
+			compatible = "arm,arm1176-pmu";
+		};
+
+		gpiomem {
+			compatible = "brcm,bcm2835-gpiomem";
+			reg = <0x7e200000 0x1000>;
+			status = "okay";
+		};
+	};
+};

arch/arm/boot/dts/bcm2708_common.dtsi

@@ -0,0 +1,347 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&intc>;
+
+	aliases {
+		audio = &audio;
+		sound = &sound;
+		soc = &soc;
+		dma = &dma;
+		intc = &intc;
+		watchdog = &watchdog;
+		random = &random;
+		mailbox = &mailbox;
+		gpio = &gpio;
+		uart0 = &uart0;
+		sdhost = &sdhost;
+		i2s  = &i2s;
+		spi0 = &spi0;
+		i2c0 = &i2c0;
+		uart1 = &uart1;
+		mmc = &mmc;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		usb = &usb;
+		leds = &leds;
+		fb = &fb;
+		vchiq = &vchiq;
+		thermal = &thermal;
+		clocks = &clocks;
+	};
+
+	/* Onboard audio */
+	audio: audio {
+		compatible = "brcm,bcm2835-audio";
+		brcm,pwm-channels = <8>;
+		status = "disabled";
+	};
+
+	/* External sound card */
+	sound: sound {
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     <1 27>;
+
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x0f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2708-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		mailbox: mailbox@7e00b800 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
+		watchdog: watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm-wdt";
+			reg = <0x7e100000 0x28>;
+			status = "disabled";
+		};
+
+		cprman: cprman@7e101000 {
+			compatible = "brcm,bcm2835-cprman";
+			#clock-cells = <1>;
+			reg = <0x7e101000 0x2000>;
+
+			/* CPRMAN derives everything from the platform's
+			 * oscillator.
+			 */
+			clocks = <&clk_osc>;
+			status = "disabled";
+		};
+
+		random: rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+			status = "disabled";
+		};
+
+		gpio: gpio@7e200000 {
+			compatible = "brcm,bcm2835-gpio";
+			reg = <0x7e200000 0xb4>;
+			interrupts = <2 17>, <2 18>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0: uart@7e201000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clocks = <&clk_uart0 &clk_apb_p>;
+			clock-names = "uartclk","apb_pclk";
+			arm,primecell-periphid = <0x00241011>; // For an explanation, see
+			// https://github.com/raspberrypi/linux/commit/13731d862cf5219216533a3b0de052cee4cc5038
+			status = "disabled";
+		};
+
+		sdhost: sdhost@7e202000 {
+			compatible = "brcm,bcm2835-sdhost";
+			reg = <0x7e202000 0x100>;
+			interrupts = <2 24>;
+			clocks = <&clk_core>;
+			dmas = <&dma 13>;
+			dma-names = "rx-tx";
+			brcm,overclock-50 = <0>;
+			brcm,pio-limit = <1>;
+			status = "disabled";
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2708-i2s";
+			reg = <0x7e203000 0x24>,
+			      <0x7e101098 0x08>;
+
+			//dmas = <&dma 2>,
+			//       <&dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi0: spi@7e204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x1000>;
+			interrupts = <2 22>;
+			clocks = <&clk_core>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			/* the dma channels */
+			dmas = <&dma 6>, <&dma 7>;
+			dma-names = "tx", "rx";
+			/* the chipselects used - <0> means native GPIO
+			 * add more gpios if necessary as <&gpio 6 1>
+			 * (but do not forget to make them output!)
+			 */
+			cs-gpios = <0>, <0>;
+		};
+
+		i2c0: i2c@7e205000 {
+			compatible = "brcm,bcm2708-i2c";
+			reg = <0x7e205000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_core>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7e20c000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clk_pwm>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		uart1: uart@7e215040 {
+			compatible = "brcm,bcm2835-aux-uart", "ns16550";
+			reg = <0x7e215040 0x40>;
+			interrupts = <1 29>;
+			clocks = <&clk_uart1>;
+			reg-shift = <2>;
+			no-loopback-test;
+			status = "disabled";
+	        };
+
+		mmc: mmc@7e300000 {
+			compatible = "brcm,bcm2835-mmc";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clk_mmc>;
+			dmas = <&dma 11>;
+			dma-names = "rx-tx";
+			brcm,overclock-50 = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@7e804000 {
+			compatible = "brcm,bcm2708-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_core>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			// Beware - this is shared with the HDMI module.
+			// Careless use may break (really) your display.
+			// Caveat emptor.
+			compatible = "brcm,bcm2708-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_core>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		smi: smi@7e600000 {
+			compatible = "brcm,bcm2835-smi";
+			reg = <0x7e600000 0x44>, <0x7e1010b0 0x8>;
+			interrupts = <2 16>;
+			brcm,smi-clock-source = <6>;
+			brcm,smi-clock-divisor = <4>;
+			dmas = <&dma 4>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		usb: usb@7e980000 {
+			compatible = "brcm,bcm2708-usb";
+			reg = <0x7e980000 0x10000>,
+			      <0x7e006000 0x1000>;
+			interrupts = <2 0>,
+				     <1 9>;
+		};
+
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware";
+			mboxes = <&mailbox>;
+		};
+
+		leds: leds {
+			compatible = "gpio-leds";
+		};
+
+		fb: fb {
+			compatible = "brcm,bcm2708-fb";
+			firmware = <&firmware>;
+			status = "disabled";
+		};
+
+		vchiq: vchiq {
+			compatible = "brcm,bcm2835-vchiq";
+			reg = <0x7e00b840 0xf>;
+			interrupts = <0 2>;
+			cache-line-size = <32>;
+			firmware = <&firmware>;
+		};
+
+		thermal: thermal {
+			compatible = "brcm,bcm2835-thermal";
+			firmware = <&firmware>;
+		};
+	};
+
+	clocks: clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk_core: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-output-names = "core";
+			clock-frequency = <250000000>;
+		};
+
+		clk_mmc: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-output-names = "mmc";
+			clock-frequency = <250000000>;
+		};
+
+		clk_uart0: clock@2 {
+			compatible = "fixed-clock";
+			reg = <2>;
+			#clock-cells = <0>;
+			clock-output-names = "uart0_pclk";
+			clock-frequency = <3000000>;
+		};
+
+		clk_apb_p: clock@3 {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-output-names = "apb_pclk";
+			clock-frequency = <126000000>;
+		};
+
+		clk_pwm: clock@4 {
+			compatible = "fixed-clock";
+			reg = <4>;
+			#clock-cells = <0>;
+			clock-output-names = "pwm";
+			clock-frequency = <100000000>;
+		};
+
+		clk_uart1: clock@5 {
+			compatible = "fixed-factor-clock";
+			reg = <5>;
+			clocks = <&clk_core>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+		};
+
+		clk_osc: clock@6 {
+			compatible = "fixed-clock";
+			reg = <6>;
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <19200000>;
+		};
+	};
+
+	__overrides__ {
+		cache_line_size = <&vchiq>, "cache-line-size:0";
+	};
+};

arch/arm/boot/dts/bcm2709-rpi-2-b.dts

@@ -0,0 +1,143 @@
+/dts-v1/;
+
+/include/ "bcm2709.dtsi"
+
+/ {
+	compatible = "brcm,bcm2709";
+	model = "Raspberry Pi 2 Model B";
+};
+
+&gpio {
+	sdhost_pins: sdhost_pins {
+		brcm,pins = <48 49 50 51 52 53>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_pins: spi0_pins {
+		brcm,pins = <7 8 9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fb {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
+	};
+
+	spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&random {
+	status = "okay";
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&gpio 47 0>;
+	};
+
+	pwr_led: pwr {
+		label = "led1";
+		linux,default-trigger = "input";
+		gpios = <&gpio 35 0>;
+	};
+};
+
+/ {
+	__overrides__ {
+		uart0 = <&uart0>,"status";
+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
+		i2s = <&i2s>,"status";
+		spi = <&spi0>,"status";
+		i2c0 = <&i2c0>,"status";
+		i2c1 = <&i2c1>,"status";
+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
+		core_freq = <&clk_core>,"clock-frequency:0";
+
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		pwr_led_gpio = <&pwr_led>,"gpios:4";
+		pwr_led_activelow = <&pwr_led>,"gpios:8";
+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+
+		audio = <&audio>,"status";
+		watchdog = <&watchdog>,"status";
+		random = <&random>,"status";
+		sd_overclock = <&sdhost>,"brcm,overclock-50:0";
+		sd_force_pio = <&sdhost>,"brcm,force-pio?";
+		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
+		sd_debug     = <&sdhost>,"brcm,debug";
+	};
+};

arch/arm/boot/dts/bcm2709.dtsi

@@ -0,0 +1,76 @@
+/include/ "bcm2708_common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2709";
+	model = "BCM2709";
+
+	chosen {
+		/* No padding required - the boot loader can do that. */
+		bootargs = "";
+	};
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x01000000>;
+
+		arm-pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupts = <3 9>;
+		};
+
+		gpiomem {
+			compatible = "brcm,bcm2835-gpiomem";
+			reg = <0x7e200000 0x1000>;
+			status = "okay";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		clock-frequency = <19200000>;
+		interrupts = <3 0>, // PHYS_SECURE_PPI
+			     <3 1>, // PHYS_NONSECURE_PPI
+			     <3 3>, // VIRT_PPI
+			     <3 2>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		v7_cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			clock-frequency = <800000000>;
+		};
+	};
+
+	__overrides__ {
+		arm_freq = <&v7_cpu0>, "clock-frequency:0",
+		       <&v7_cpu1>, "clock-frequency:0",
+		       <&v7_cpu2>, "clock-frequency:0",
+		       <&v7_cpu3>, "clock-frequency:0";
+	};
+};

arch/arm/boot/dts/bcm2710-rpi-3-b.dts

@@ -0,0 +1,190 @@
+/dts-v1/;
+
+/include/ "bcm2710.dtsi"
+
+/ {
+	model = "Raspberry Pi 3 Model B";
+};
+
+&gpio {
+	sdhost_pins: sdhost_pins {
+		brcm,pins = <48 49 50 51 52 53>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	spi0_pins: spi0_pins {
+		brcm,pins = <7 8 9 10 11>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	i2c0_pins: i2c0 {
+		brcm,pins = <0 1>;
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+
+	i2s_pins: i2s {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	sdio_pins: sdio_pins {
+		brcm,pins =     <34 35 36 37 38 39>;
+		brcm,function = <7 7 7 7 7 7>; /* alt3 = SD1 */
+		brcm,pull =     <0 2 2 2 2 2>;
+	};
+
+	bt_pins: bt_pins {
+		brcm,pins =     <28 29 30 31 43>;
+		brcm,function = <6 6 6 6 4>;   /* alt2:PCM alt0:GPCLK2 */
+		brcm,pull =     <0 0 0 0 0>;
+	};
+
+	uart0_pins: uart0_pins {
+		brcm,pins = <32 33>;
+		brcm,function = <7>; /* alt3=UART0 */
+		brcm,pull = <0 2>;
+	};
+
+	uart1_pins: uart1_pins {
+		brcm,pins = <14 15>;
+		brcm,function = <2>; /* alt5=UART1 */
+		brcm,pull = <0 2>;
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+	brcm,overclock-50 = <0>;
+};
+
+&soc {
+	virtgpio: virtgpio {
+		compatible = "brcm,bcm2835-virtgpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		firmware = <&firmware>;
+		status = "okay";
+	};
+};
+
+&fb {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins &bt_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	cs-gpios = <0 0>;
+
+	spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
+	};
+
+	spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&random {
+	status = "okay";
+};
+
+&leds {
+	act_led: act {
+		label = "led0";
+		linux,default-trigger = "mmc0";
+		gpios = <&virtgpio 0 0>;
+	};
+};
+
+/ {
+	chosen {
+		bootargs = "8250.nr_uarts=1";
+	};
+};
+
+/ {
+	__overrides__ {
+		uart0 = <&uart0>,"status";
+		uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
+		i2s = <&i2s>,"status";
+		spi = <&spi0>,"status";
+		i2c0 = <&i2c0>,"status";
+		i2c1 = <&i2c1>,"status";
+		i2c2_iknowwhatimdoing = <&i2c2>,"status";
+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
+		core_freq = <&clk_core>,"clock-frequency:0";
+
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+
+		audio = <&audio>,"status";
+		watchdog = <&watchdog>,"status";
+		random = <&random>,"status";
+		sd_overclock = <&sdhost>,"brcm,overclock-50:0";
+		sd_force_pio = <&sdhost>,"brcm,force-pio?";
+		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
+		sd_debug     = <&sdhost>,"brcm,debug";
+	};
+};

arch/arm/boot/dts/bcm2710.dtsi

@@ -0,0 +1,76 @@
+/include/ "bcm2708_common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2710","brcm,bcm2709";
+	model = "BCM2710";
+
+	chosen {
+		/* No padding required - the boot loader can do that. */
+		bootargs = "";
+	};
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x01000000>;
+
+		arm-pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupts = <3 9>;
+		};
+
+		gpiomem {
+			compatible = "brcm,bcm2835-gpiomem";
+			reg = <0x7e200000 0x1000>;
+			status = "okay";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		clock-frequency = <19200000>;
+		interrupts = <3 0>, // PHYS_SECURE_PPI
+			     <3 1>, // PHYS_NONSECURE_PPI
+			     <3 3>, // VIRT_PPI
+			     <3 2>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		v7_cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x000>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x001>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x002>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x003>;
+			clock-frequency = <800000000>;
+		};
+	};
+
+	__overrides__ {
+		arm_freq = <&v7_cpu0>, "clock-frequency:0",
+		       <&v7_cpu1>, "clock-frequency:0",
+		       <&v7_cpu2>, "clock-frequency:0",
+		       <&v7_cpu3>, "clock-frequency:0";
+	};
+};

arch/arm/boot/dts/bcm2835-rpi-b-plus.dts

@@ -4,27 +4,40 @@
 / {
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
 	model = "Raspberry Pi Model B+";
-
-	leds {
-		act {
-			gpios = <&gpio 47 0>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 0>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+	i2s_pins: i2s {
-
-	/* I2S interface */
-	i2s_alt0: i2s_alt0 {
 		brcm,pins = <18 19 20 21>;
 		brcm,function = <4>; /* alt0 */
 	};
 };
+
+&i2s {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&act_led {
+	gpios = <&gpio 47 0>;
+};
+
+&leds {
+	pwr_led: pwr {
+		label = "led1";
+		linux,default-trigger = "input";
+		gpios = <&gpio 35 0>;
+	};
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
+
+		pwr_led_gpio = <&pwr_led>,"gpios:4";
+		pwr_led_activelow = <&pwr_led>,"gpios:8";
+		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+	};
+};

arch/arm/boot/dts/bcm2835-rpi-b.dts

@@ -5,19 +5,28 @@
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
 	model = "Raspberry Pi Model B";
 
-	leds {
-		act {
-			gpios = <&gpio 16 1>;
-		};
-	};
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+	i2s_pins: i2s {
-
-	/* I2S interface */
-	i2s_alt2: i2s_alt2 {
 		brcm,pins = <28 29 30 31>;
-		brcm,function = <6>; /* alt2 */
+		brcm,function = <4>; /* alt0 */
+	};
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_pins>;
+};
+
+&act_led {
+	gpios = <&gpio 16 1>;
+};
+
+/ {
+	__overrides__ {
+		act_led_gpio = <&act_led>,"gpios:4";
+		act_led_activelow = <&act_led>,"gpios:8";
 	};
 };

arch/arm/boot/dts/bcm2835-rpi.dtsi

@@ -1,51 +1,133 @@
 /include/ "bcm2835.dtsi"
 
 / {
+	/* This is left here in case u-boot needs it */
 	memory {
 		reg = <0 0x10000000>;
 	};
 
-	leds {
+	aliases {
+		soc = &soc;
+		spi0 = &spi0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2s  = &i2s;
+		gpio = &gpio;
+		intc = &intc;
+		leds = &leds;
+		sound = &sound;
+	};
+
+	leds: leds {
 		compatible = "gpio-leds";
 
-		act {
+		act_led: act {
-			label = "ACT";
+			label = "led0";
-			default-state = "keep";
+			linux,default-trigger = "mmc0";
-			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware";
+			mboxes = <&mailbox>;
+		};
+
+		fb: fb {
+			compatible = "brcm,bcm2708-fb";
+			firmware = <&firmware>;
+		};
+
+		thermal: thermal {
+			compatible = "brcm,bcm2835-thermal";
+			firmware = <&firmware>;
+		};
+
+		vchiq: vchiq {
+			compatible = "brcm,bcm2835-vchiq";
+			reg = <0x7e00b840 0xf>;
+			interrupts = <0 2>;
+			cache-line-size = <32>;
+			firmware = <&firmware>;
+		};
+	};
+
+	/* Onboard audio */
+	audio: audio {
+		compatible = "brcm,bcm2835-audio";
+		brcm,pwm-channels = <8>;
+		status = "disabled";
+	};
+
+	/* External sound card */
+	sound: sound {
+	};
 };
 
 &gpio {
-	pinctrl-names = "default";
+	spi0_pins: spi0_pins {
-
+		brcm,pins = <7 8 9 10 11>;
-	gpioout: gpioout {
-		brcm,pins = <6>;
-		brcm,function = <1>; /* GPIO out */
-	};
-
-	alt0: alt0 {
-		brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
 		brcm,function = <4>; /* alt0 */
 	};
 
-	alt3: alt3 {
+	i2c0_pins: i2c0 {
-		brcm,pins = <48 49 50 51 52 53>;
+		brcm,pins = <0 1>;
-		brcm,function = <7>; /* alt3 */
+		brcm,function = <4>;
+	};
+
+	i2c1_pins: i2c1 {
+		brcm,pins = <2 3>;
+		brcm,function = <4>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	spidev@0{
+		compatible = "spidev";
+		reg = <0>;	/* CE0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
+	};
+
+	spidev@1{
+		compatible = "spidev";
+		reg = <1>;	/* CE1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <500000>;
 	};
 };
 
 &i2c0 {
-	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
 	clock-frequency = <100000>;
 };
 
 &i2c1 {
-	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <100000>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 	bus-width = <4>;
 };
+
+/ {
+	__overrides__ {
+		i2s = <&i2s>,"status";
+		spi = <&spi0>,"status";
+		i2c0 = <&i2c0>,"status";
+		i2c1 = <&i2c1>,"status";
+		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
+		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
+		act_led_trigger = <&act_led>,"linux,default-trigger";
+		audio = <&audio>,"status";
+	};
+};

arch/arm/boot/dts/bcm2835.dtsi

@@ -6,14 +6,15 @@
 	interrupt-parent = <&intc>;
 
 	chosen {
-		bootargs = "earlyprintk console=ttyAMA0";
+		bootargs = "";
 	};
 
-	soc {
+	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x7e000000 0x20000000 0x02000000>;
+		dma-ranges = <0x40000000 0x00000000 0x20000000>;
 
 		timer@7e003000 {
 			compatible = "brcm,bcm2835-system-timer";
@@ -50,16 +51,23 @@
 			#interrupt-cells = <2>;
 		};
 
-		watchdog@7e100000 {
+		watchdog: watchdog@7e100000 {
 			compatible = "brcm,bcm2835-pm-wdt";
 			reg = <0x7e100000 0x28>;
 		};
 
-		rng@7e104000 {
+		random: rng@7e104000 {
 			compatible = "brcm,bcm2835-rng";
 			reg = <0x7e104000 0x10>;
 		};
 
+		mailbox: mailbox@7e00b800 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
 		gpio: gpio@7e200000 {
 			compatible = "brcm,bcm2835-gpio";
 			reg = <0x7e200000 0xb4>;
@@ -83,7 +91,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		uart@7e201000 {
+		uart0: uart@7e201000 {
 			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
 			reg = <0x7e201000 0x1000>;
 			interrupts = <2 25>;
@@ -93,8 +101,8 @@
 
 		i2s: i2s@7e203000 {
 			compatible = "brcm,bcm2835-i2s";
-			reg = <0x7e203000 0x20>,
+			reg = <0x7e203000 0x24>,
-			      <0x7e101098 0x02>;
+			      <0x7e101098 0x08>;
 
 			dmas = <&dma 2>,
 			       <&dma 3>;
@@ -102,7 +110,7 @@
 			status = "disabled";
 		};
 
-		spi: spi@7e204000 {
+		spi0: spi@7e204000 {
 			compatible = "brcm,bcm2835-spi";
 			reg = <0x7e204000 0x1000>;
 			interrupts = <2 22>;
@@ -122,11 +130,14 @@
 			status = "disabled";
 		};
 
-		sdhci: sdhci@7e300000 {
+		mmc: mmc@7e300000 {
-			compatible = "brcm,bcm2835-sdhci";
+			compatible = "brcm,bcm2835-mmc";
 			reg = <0x7e300000 0x100>;
 			interrupts = <2 30>;
 			clocks = <&clk_mmc>;
+			dmas = <&dma 11>,
+			       <&dma 11>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -140,10 +151,12 @@
 			status = "disabled";
 		};
 
-		usb@7e980000 {
+		usb: usb@7e980000 {
-			compatible = "brcm,bcm2835-usb";
+			compatible = "brcm,bcm2708-usb";
-			reg = <0x7e980000 0x10000>;
+			reg = <0x7e980000 0x10000>,
-			interrupts = <1 9>;
+			      <0x7e006000 0x1000>;
+			interrupts = <2 0>,
+				     <1 9>;
 		};
 
 		arm-pmu {
@@ -161,7 +174,7 @@
 			reg = <0>;
 			#clock-cells = <0>;
 			clock-output-names = "mmc";
-			clock-frequency = <100000000>;
+			clock-frequency = <250000000>;
 		};
 
 		clk_i2c: clock@1 {

arch/arm/boot/dts/dra7-evm.dts

@@ -686,7 +686,8 @@
 
 &dcan1 {
 	status = "ok";
-	pinctrl-names = "default", "sleep";
+	pinctrl-names = "default", "sleep", "active";
-	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
 };

arch/arm/boot/dts/dra7.dtsi

@@ -116,7 +116,7 @@
 				ranges = <0 0x2000 0x2000>;
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x1400>;
 					#address-cells = <1>;
 					#size-cells = <1>;

arch/arm/boot/dts/dra72-evm.dts

@@ -497,9 +497,10 @@
 
 &dcan1 {
 	status = "ok";
-	pinctrl-names = "default", "sleep";
+	pinctrl-names = "default", "sleep", "active";
-	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
 };
 
 &qspi {

arch/arm/boot/dts/exynos3250-rinato.dts

@@ -181,7 +181,7 @@
 
 		display-timings {
 			timing-0 {
-				clock-frequency = <0>;
+				clock-frequency = <4600000>;
 				hactive = <320>;
 				vactive = <320>;
 				hfront-porch = <1>;

arch/arm/boot/dts/exynos5420-peach-pit.dts

@@ -915,6 +915,11 @@
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;

arch/arm/boot/dts/exynos5800-peach-pi.dts

@@ -878,6 +878,11 @@
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;

arch/arm/boot/dts/imx23.dtsi

@@ -435,6 +435,7 @@
 				interrupts = <36 37 38 39 40 41 42 43 44>;
 				status = "disabled";
 				clocks = <&clks 26>;
+				#io-channel-cells = <1>;
 			};
 
 			spdif@80054000 {

arch/arm/boot/dts/imx25-pdk.dts

@@ -10,6 +10,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include "imx25.dtsi"
 
@@ -114,8 +115,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 1 0>;
+	cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 0 0>;
+	wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx27.dtsi

@@ -477,7 +477,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024000 0x200>;
 				interrupts = <56>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
@@ -486,7 +489,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024200 0x200>;
 				interrupts = <54>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				dr_mode = "host";
 				status = "disabled";
@@ -496,7 +502,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024400 0x200>;
 				interrupts = <55>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 2>;
 				dr_mode = "host";
 				status = "disabled";
@@ -506,7 +515,6 @@
 				#index-cells = <1>;
 				compatible = "fsl,imx27-usbmisc";
 				reg = <0x10024600 0x200>;
-				clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
 			};
 
 			sahara2: sahara@10025000 {

arch/arm/boot/dts/imx35.dtsi

@@ -286,8 +286,8 @@
 			can1: can@53fe4000 {
 				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fe4000 0x1000>;
-				clocks = <&clks 33>;
+				clocks = <&clks 33>, <&clks 33>;
-				clock-names = "ipg";
+				clock-names = "ipg", "per";
 				interrupts = <43>;
 				status = "disabled";
 			};
@@ -295,8 +295,8 @@
 			can2: can@53fe8000 {
 				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fe8000 0x1000>;
-				clocks = <&clks 34>;
+				clocks = <&clks 34>, <&clks 34>;
-				clock-names = "ipg";
+				clock-names = "ipg", "per";
 				interrupts = <44>;
 				status = "disabled";
 			};

arch/arm/boot/dts/imx51-apf51dev.dts

@@ -98,7 +98,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm/boot/dts/imx53-ard.dts

@@ -103,8 +103,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 0>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-m53evk.dts

@@ -124,8 +124,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 0>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-qsb-common.dtsi

@@ -147,8 +147,8 @@
 &esdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 0>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 12 0>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 	status = "okay";
 };

arch/arm/boot/dts/imx53-smd.dts

@@ -41,8 +41,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 0>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 11 0>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-tqma53.dtsi

@@ -41,8 +41,8 @@
 	pinctrl-0 = <&pinctrl_esdhc2>,
 		    <&pinctrl_esdhc2_cdwp>;
 	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 0>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 

arch/arm/boot/dts/imx53-tx53.dtsi

@@ -183,7 +183,7 @@
 };
 
 &esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
@@ -191,7 +191,7 @@
 };
 
 &esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;

arch/arm/boot/dts/imx53-voipac-bsb.dts

@@ -119,8 +119,8 @@
 &esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 0>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 19 0>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6dl-riotboard.dts

@@ -305,8 +305,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 0>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -314,8 +314,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 0>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6q-arm2.dts

@@ -11,6 +11,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -196,8 +197,8 @@
 };
 
 &usdhc3 {
-	cd-gpios = <&gpio6 11 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 14 0>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3

arch/arm/boot/dts/imx6q-gk802.dts

@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -161,7 +162,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 11 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6q-tbs2910.dts

@@ -251,7 +251,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -260,7 +260,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-aristainetos.dtsi

@@ -173,7 +173,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -181,7 +181,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-cubox-i.dtsi

@@ -259,6 +259,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi

@@ -1,3 +1,5 @@
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -181,7 +183,7 @@
 &usdhc2 { /* module slot */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };